Update Docker docs for 6.0.0-rc2 (#27166)

* Update Docker docs for 6.0.0-rc2

* Update the docs to match the new Docker "image flavours" of "basic",
"platinum", and "oss".

* Clarifications for Openshift and bind-mounts

* Bump docker-compose 2.x format to 2.2

* Combine Docker Toolbox instructions for setting vm.max_map_count for
  both macOS + Windows

* devicemapper is not the default storage driver any more on RHEL

docs/Versions.asciidoc

@@ -14,7 +14,8 @@ release-state can be: released | prerelease | unreleased
 :issue:           https://github.com/elastic/elasticsearch/issues/
 :pull:            https://github.com/elastic/elasticsearch/pull/
 
-:docker-image:    docker.elastic.co/elasticsearch/elasticsearch:{version}
+:docker-repo:     docker.elastic.co/elasticsearch/elasticsearch
+:docker-image:    {docker-repo}:{version}
 :plugin_url:      https://artifacts.elastic.co/downloads/elasticsearch-plugins
 
 ///////

docs/reference/setup/install.asciidoc

@@ -37,7 +37,9 @@ Elasticsearch on Windows. MSIs may be downloaded from the Elasticsearch website.
 
 `docker`::
 
-An image is available for running Elasticsearch as a Docker container. It ships with {xpack-ref}/index.html[X-Pack] pre-installed and may be downloaded from the Elastic Docker Registry.
+Images are available for running Elasticsearch as Docker containers. They may be
+downloaded from the Elastic Docker Registry. The default image ships with
+{xpack-ref}/index.html[X-Pack] pre-installed.
 +
 <<docker>>
 

docs/reference/setup/install/docker.asciidoc

@@ -1,32 +1,54 @@
 [[docker]]
 === Install Elasticsearch with Docker
 
-Elasticsearch is also available as a Docker image.
-The image is built with {xpack-ref}/index.html[X-Pack] and uses https://hub.docker.com/_/centos/[centos:7] as the base image.
-The source code can be found on https://github.com/elastic/elasticsearch-docker/tree/{branch}[GitHub].
+Elasticsearch is also available as Docker images.
+The images use https://hub.docker.com/_/centos/[centos:7] as the base image and
+are available with {xpack-ref}/xpack-introduction.html[X-Pack].
 
-==== Security note
+A list of all published Docker images and tags can be found in https://www.docker.elastic.co[www.docker.elastic.co]. The source code can be found
+on https://github.com/elastic/elasticsearch-docker/tree/{branch}[GitHub].
 
-NOTE: {xpack-ref}/index.html[X-Pack] is preinstalled in this image.
-Please take a few minutes to familiarize yourself with {xpack-ref}/security-getting-started.html[X-Pack Security] and how to change default passwords. The default password for the `elastic` user is `changeme`.
+==== Image types
 
-NOTE: X-Pack includes a trial license for 30 days. After that, you can obtain one of the https://www.elastic.co/subscriptions[available subscriptions] or {ref}/security-settings.html[disable Security]. The Basic license is free and includes the https://www.elastic.co/products/x-pack/monitoring[Monitoring] extension.
+The images are available in three different configurations or "flavors". The
+`basic` flavor, which is the default, ships with X-Pack Basic features
+pre-installed and automatically activated with a free licence. The `platinum`
+flavor features all X-Pack functionally under a 30-day trial licence. The `oss`
+flavor does not include X-Pack, and contains only open-source Elasticsearch.
+
+NOTE: {xpack-ref}/xpack-security.html[X-Pack Security] is enabled in the `platinum`
+image. To access your cluster, it's necessary to set an initial password for the
+`elastic` user. The initial password can be set at start up time via the
+`ELASTIC_PASSWORD` environment variable:
+
+["source","txt",subs="attributes"]
+--------------------------------------------
+docker run -e ELASTIC_PASSWORD=MagicWord {docker-repo}-platinum:{version}
+--------------------------------------------
+
+NOTE: The `platinum` image includes a trial license for 30 days. After that, you
+can obtain one of the https://www.elastic.co/subscriptions[available
+subscriptions] or revert to a Basic licence. The Basic license is free and
+includes a selection of X-Pack features.
 
 Obtaining Elasticsearch for Docker is as simple as issuing a +docker pull+ command against the Elastic Docker registry.
 
 ifeval::["{release-state}"=="unreleased"]
 
-WARNING: Version {version} of Elasticsearch has not yet been released, so no Docker image is currently available for this version.
+WARNING: Version {version} of Elasticsearch has not yet been released, so no
+Docker image is currently available for this version.
 
 endif::[]
 
 ifeval::["{release-state}"!="unreleased"]
 
-The Docker image can be retrieved with the following command:
+Docker images can be retrieved with the following commands:
 
 ["source","sh",subs="attributes"]
 --------------------------------------------
-docker pull {docker-image}
+docker pull {docker-repo}:{version}
+docker pull {docker-repo}-platinum:{version}
+docker pull {docker-repo}-oss:{version}
 --------------------------------------------
 
 endif::[]
@@ -76,7 +98,7 @@ vm.max_map_count=262144
 +
 To apply the setting on a live system type: `sysctl -w vm.max_map_count=262144`
 +
-* OSX with https://docs.docker.com/engine/installation/mac/#/docker-for-mac[Docker for Mac]
+* macOS with https://docs.docker.com/engine/installation/mac/#/docker-for-mac[Docker for Mac]
 +
 The `vm.max_map_count` setting must be set within the xhyve virtual machine:
 +
@@ -93,11 +115,11 @@ Then configure the `sysctl` setting as you would for Linux:
 sysctl -w vm.max_map_count=262144
 --------------------------------------------
 +
-* OSX with https://docs.docker.com/engine/installation/mac/#docker-toolbox[Docker Toolbox]
+* Windows and macOS with https://www.docker.com/products/docker-toolbox[Docker Toolbox]
 +
 The `vm.max_map_count` setting must be set via docker-machine:
 +
-["source","sh"]
+["source","txt"]
 --------------------------------------------
 docker-machine ssh
 sudo sysctl -w vm.max_map_count=262144
@@ -109,7 +131,8 @@ To bring up the cluster, use the <<docker-prod-cluster-composefile,`docker-compo
 
 ifeval::["{release-state}"=="unreleased"]
 
-WARNING: Version {version} of the Elasticsearch Docker image has not yet been released, so a `docker-compose.yml` is not available for this version.
+WARNING: Version {version} of Elasticsearch has not yet been released, so a
+`docker-compose.yml` is not available for this version.
 
 endif::[]
 
@@ -124,9 +147,11 @@ endif::[]
 
 [NOTE]
 `docker-compose` is not pre-installed with Docker on Linux.
-Instructions for installing it can be found on the https://docs.docker.com/compose/install/#install-using-pip[docker-compose webpage].
+Instructions for installing it can be found on the
+https://docs.docker.com/compose/install/#install-using-pip[Docker Compose webpage].
 
-The node `elasticsearch1` listens on `localhost:9200` while `elasticsearch2` talks to `elasticsearch1` over a Docker network.
+The node `elasticsearch` listens on `localhost:9200` while `elasticsearch2`
+talks to `elasticsearch` over a Docker network.
 
 This example also uses https://docs.docker.com/engine/tutorials/dockervolumes[Docker named volumes], called `esdata1` and `esdata2` which will be created if not already present.
 
@@ -134,18 +159,19 @@ This example also uses https://docs.docker.com/engine/tutorials/dockervolumes[Do
 `docker-compose.yml`:
 ifeval::["{release-state}"=="unreleased"]
 
-WARNING: Version {version} of the Elasticsearch Docker image has not yet been released, so a `docker-compose.yml` is not available for this version.
+WARNING: Version {version} of Elasticsearch has not yet been released, so a
+`docker-compose.yml` is not available for this version.
 
 endif::[]
 
 ifeval::["{release-state}"!="unreleased"]
 ["source","yaml",subs="attributes"]
 --------------------------------------------
-version: '2'
+version: 2.2
 services:
-  elasticsearch1:
-    image: docker.elastic.co/elasticsearch/elasticsearch:{version}
-    container_name: elasticsearch1
+  elasticsearch:
+    image: {docker-image}
+    container_name: elasticsearch
     environment:
       - cluster.name=docker-cluster
       - bootstrap.memory_lock=true
@@ -154,7 +180,6 @@ services:
       memlock:
         soft: -1
         hard: -1
-    mem_limit: 1g
     volumes:
       - esdata1:/usr/share/elasticsearch/data
     ports:
@@ -162,17 +187,17 @@ services:
     networks:
       - esnet
   elasticsearch2:
-    image: docker.elastic.co/elasticsearch/elasticsearch:{version}
+    image: {docker-image}
+    container_name: elasticsearch2
     environment:
       - cluster.name=docker-cluster
       - bootstrap.memory_lock=true
       - "ES_JAVA_OPTS=-Xms512m -Xmx512m"
-      - "discovery.zen.ping.unicast.hosts=elasticsearch1"
+      - "discovery.zen.ping.unicast.hosts=elasticsearch"
     ulimits:
       memlock:
         soft: -1
         hard: -1
-    mem_limit: 1g
     volumes:
       - esdata2:/usr/share/elasticsearch/data
     networks:
@@ -190,20 +215,16 @@ networks:
 endif::[]
 
 To stop the cluster, type `docker-compose down`. Data volumes will persist, so it's possible to start the cluster again with the same data using `docker-compose up`.
-To destroy the cluster **and the data volumes** just type `docker-compose down -v`.
+To destroy the cluster **and the data volumes**, just type `docker-compose down -v`.
 
 ===== Inspect status of cluster:
 
-["source","sh"]
+["source","txt"]
 --------------------------------------------
-curl -u elastic http://127.0.0.1:9200/_cat/health
-Enter host password for user 'elastic':
+curl http://127.0.0.1:9200/_cat/health
 1472225929 15:38:49 docker-cluster green 2 2 4 2 0 0 0 0 - 100.0%
 --------------------------------------------
 // NOTCONSOLE
-// This is demonstrating curl. Console will prompt you for a username and
-// password so no need to demonstrate that. Converting this would not show the
-// important `-u elastic` parameters for `curl`.
 
 Log messages go to the console and are handled by the configured Docker logging driver. By default you can access logs with `docker logs`.
 
@@ -225,7 +246,7 @@ For example, bind-mounting a `custom_elasticsearch.yml` with `docker run` can be
 --------------------------------------------
 -v full_path_to/custom_elasticsearch.yml:/usr/share/elasticsearch/config/elasticsearch.yml
 --------------------------------------------
-IMPORTANT: The container **runs Elasticsearch as user `elasticsearch` using uid:gid `1000:1000`**. Bind mounted host directories and files, such as `custom_elasticsearch.yml` above, **need to be accessible by this user**. For the https://www.elastic.co/guide/en/elasticsearch/reference/current/important-settings.html#path-settings[data and log dirs], such as `/usr/share/elasticsearch/data`, write access is required as well.
+IMPORTANT: The container **runs Elasticsearch as user `elasticsearch` using uid:gid `1000:1000`**. Bind mounted host directories and files, such as `custom_elasticsearch.yml` above, **need to be accessible by this user**. For the https://www.elastic.co/guide/en/elasticsearch/reference/current/important-settings.html#path-settings[data and log dirs], such as `/usr/share/elasticsearch/data`, write access is required as well. Also see note 1 below.
 
 ===== C. Customized image
 In some environments, it may make more sense to prepare a custom image containing your configuration. A `Dockerfile` to achieve this may be as simple as:
@@ -233,10 +254,7 @@ In some environments, it may make more sense to prepare a custom image containin
 ["source","sh",subs="attributes"]
 --------------------------------------------
 FROM docker.elastic.co/elasticsearch/elasticsearch:{version}
-ADD elasticsearch.yml /usr/share/elasticsearch/config/
-USER root
-RUN chown elasticsearch:elasticsearch config/elasticsearch.yml
-USER elasticsearch
+COPY --chown=elasticsearch:elasticsearch elasticsearch.yml /usr/share/elasticsearch/config/
 --------------------------------------------
 
 You could then build and try the image with something like:
@@ -260,10 +278,19 @@ docker run <various parameters> bin/elasticsearch -Ecluster.name=mynewclusternam
 ==== Notes for production use and defaults
 
 We have collected a number of best practices for production use.
+Any Docker parameters mentioned below assume the use of `docker run`.
 
-NOTE: Any Docker parameters mentioned below assume the use of `docker run`.
-
-. Elasticsearch runs inside the container as user `elasticsearch` using uid:gid `1000:1000`. If you are bind-mounting a local directory or file, ensure it is readable by this user, while the <<path-settings,data and log dirs>> additionally require write access.
+. By default, Elasticsearch runs inside the container as user `elasticsearch` using uid:gid `1000:1000`.
++
+CAUTION: One exception is https://docs.openshift.com/container-platform/3.6/creating_images/guidelines.html#openshift-specific-guidelines[Openshift] which runs containers using an arbitrarily assigned user ID. Openshift will present persistent volumes with the gid set to `0` which will work without any adjustments.
++
+If you are bind-mounting a local directory or file, ensure it is readable by this user, while the <<path-settings,data and log dirs>> additionally require write access. A good strategy is to grant group access to gid `1000` or `0` for the local directory. As an example, to prepare a local directory for storing data through a bind-mount:
++
+  mkdir esdatadir
+  chmod g+rwx esdatadir
+  chgrp 1000 esdatadir
++
+As a last resort, you can also force the container to mutate the ownership of any bind-mounts used for the <<path-settings,data and log dirs>> through the environment variable `TAKE_FILE_OWNERSHIP`; in this case they will be owned by uid:gid `1000:0` providing read/write access to the elasticsearch process as required.
 +
 . It is important to ensure increased ulimits for <<setting-system-settings,nofile>> and <<max-number-threads-check,nproc>> are available for the Elasticsearch containers. Verify the https://github.com/moby/moby/tree/ea4d1243953e6b652082305a9c3cda8656edab26/contrib/init[init system] for the Docker daemon is already setting those to acceptable values and, if needed, adjust them in the Daemon, or override them per container, for example using `docker run`:
 +
@@ -273,13 +300,22 @@ NOTE: One way of checking the Docker daemon defaults for the aforementioned ulim
 +
   docker run --rm centos:7 /bin/bash -c 'ulimit -Hn && ulimit -Sn && ulimit -Hu && ulimit -Su'
 +
-. Swapping needs to be disabled for performance and node stability. This can be achieved through any of the methods mentioned in the <<setup-configuration-memory,Elasticsearch docs>>. If you opt for the `bootstrap.memory_lock: true` approach, apart from defining it through any of the <<docker-configuration-methods,configuration methods>>, you will additionally need the `memlock: true` ulimit, either defined in the https://docs.docker.com/engine/reference/commandline/dockerd/#default-ulimits[Docker Daemon] or specifically set for the container. This has been demonstrated earlier in the <<docker-prod-cluster-composefile,docker-compose.yml>>, or using `docker run`:
+. Swapping needs to be disabled for performance and node stability. This can be
+achieved through any of the methods mentioned in the
+<<setup-configuration-memory,Elasticsearch docs>>. If you opt for the
+`bootstrap.memory_lock: true` approach, apart from defining it through any of
+the <<docker-configuration-methods,configuration methods>>, you will
+additionally need the `memlock: true` ulimit, either defined in the
+https://docs.docker.com/engine/reference/commandline/dockerd/#default-ulimits[Docker
+Daemon] or specifically set for the container. This is demonstrated above in the
+<<docker-prod-cluster-composefile,docker-compose.yml>>. If using `docker run`:
 +
   -e "bootstrap.memory_lock=true" --ulimit memlock=-1:-1
 +
 . The image https://docs.docker.com/engine/reference/builder/#/expose[exposes] TCP ports 9200 and 9300. For clusters it is recommended to randomize the published ports with `--publish-all`, unless you are pinning one container per host.
 +
-. Use the `ES_JAVA_OPTS` environment variable to set heap size, e.g. to use 16GB use `-e ES_JAVA_OPTS="-Xms16g -Xmx16g"` with `docker run`. It is also recommended to set a https://docs.docker.com/engine/reference/run/#user-memory-constraints[memory limit] for the container.
+. Use the `ES_JAVA_OPTS` environment variable to set heap size, e.g. to use 16GB
+use `-e ES_JAVA_OPTS="-Xms16g -Xmx16g"` with `docker run`.
 +
 . Pin your deployments to a specific version of the Elasticsearch Docker image, e.g. +docker.elastic.co/elasticsearch/elasticsearch:{version}+.
 +
@@ -289,7 +325,10 @@ NOTE: One way of checking the Docker daemon defaults for the aforementioned ulim
 .. Elasticsearch is I/O sensitive and the Docker storage driver is not ideal for fast I/O
 .. It allows the use of advanced https://docs.docker.com/engine/extend/plugins/#volume-plugins[Docker volume plugins]
 +
-. If you are using the devicemapper storage driver (default on at least RedHat (rpm) based distributions) make sure you are not using the default `loop-lvm` mode. Configure docker-engine to use https://docs.docker.com/engine/userguide/storagedriver/device-mapper-driver/#configure-docker-with-devicemapper[direct-lvm] instead.
+. If you are using the devicemapper storage driver, make sure you are not using
+the default `loop-lvm` mode. Configure docker-engine to use
+https://docs.docker.com/engine/userguide/storagedriver/device-mapper-driver/#configure-docker-with-devicemapper[direct-lvm]
+instead.
 +
 . Consider centralizing your logs by using a different https://docs.docker.com/engine/admin/logging/overview/[logging driver]. Also note that the default json-file logging driver is not ideally suited for production use.