elasticsearch/docs/reference/settings/ml-settings.asciidoc

[role="xpack"]
[[ml-settings]]
=== Machine learning settings in Elasticsearch
++++
<titleabbrev>Machine learning settings</titleabbrev>
++++

[[ml-settings-description]]
// tag::ml-settings-description-tag[]
You do not need to configure any settings to use {ml}. It is enabled by default.

IMPORTANT: {ml-cap} uses SSE4.2 instructions, so it works only on machines whose
CPUs {wikipedia}/SSE4#Supporting_CPUs[support] SSE4.2. If you run {es} on older
hardware, you must disable {ml} (by setting `xpack.ml.enabled` to `false`).

// end::ml-settings-description-tag[]

[discrete]
[[general-ml-settings]]
==== General machine learning settings

`node.roles: [ ml ]`::
(<<static-cluster-setting,Static>>) Set `node.roles` to contain `ml` to identify
the node as a _{ml} node_. If you want to run {ml} jobs, there must be at least
one {ml} node in your cluster. 
+
If you set `node.roles`, you must explicitly specify all the required roles for
the node. To learn more, refer to <<modules-node>>.
+
[IMPORTANT]
====
* On dedicated coordinating nodes or dedicated master nodes, do not set
the `ml` role.
* It is strongly recommended that dedicated {ml} nodes also have the
`remote_cluster_client` role; otherwise, {ccs} fails when used in {ml} jobs or
{dfeeds}. See <<remote-node>>.
====

`xpack.ml.enabled`::
(<<static-cluster-setting,Static>>) The default value (`true`) enables {ml} APIs
on the node.
+
IMPORTANT: If you want to use {ml-features} in your cluster, it is recommended
that you use the default value for this setting on all nodes.
+
If set to `false`, the {ml} APIs are disabled on the node. For example, the node
cannot open jobs, start {dfeeds}, receive transport (internal) communication
requests, or requests from clients (including {kib}) related to {ml} APIs.

`xpack.ml.inference_model.cache_size`::
(<<static-cluster-setting,Static>>) The maximum inference cache size allowed.
The inference cache exists in the JVM heap on each ingest node. The cache
affords faster processing times for the `inference` processor. The value can be
a static byte sized value (such as `2gb`) or a percentage of total allocated
heap. Defaults to `40%`. See also <<model-inference-circuit-breaker>>.

[[xpack-interference-model-ttl]]
// tag::interference-model-ttl-tag[]
`xpack.ml.inference_model.time_to_live` {ess-icon}::
(<<static-cluster-setting,Static>>) The time to live (TTL) for trained models in 
the inference model cache. The TTL is calculated from last access. Users of the 
cache (such as the inference processor or inference aggregator) cache a model on
its first use and reset the TTL on every use. If a cached model is not accessed
for the duration of the TTL, it is flagged for eviction from the cache. If a 
document is processed later, the model is again loaded into the cache. To update 
this setting in {ess}, see
{cloud}/ec-add-user-settings.html[Add {es} user settings]. Defaults to `5m`.
// end::interference-model-ttl-tag[]

`xpack.ml.max_inference_processors`::
(<<cluster-update-settings,Dynamic>>) The total number of `inference` type
processors allowed across all ingest pipelines. Once the limit is reached,
adding an `inference` processor to a pipeline is disallowed. Defaults to `50`.

`xpack.ml.max_machine_memory_percent`::
(<<cluster-update-settings,Dynamic>>) The maximum percentage of the machine's
memory that {ml} may use for running analytics processes. These processes are
separate to the {es} JVM. The limit is based on the total memory of the machine, 
not current free memory. Jobs are not allocated to a node if doing so would
cause the estimated memory use of {ml} jobs to exceed the limit. When the
{operator-feature} is enabled, this setting can be updated only by operator
users. The minimum value is `5`; the maximum value is `200`. Defaults to `30`.
+
--
TIP: Do not configure this setting to a value higher than the amount of memory
left over after running the {es} JVM unless you have enough swap space to
accommodate it and have determined this is an appropriate configuration for a
specialist use case. The maximum setting value is for the special case where it
has been determined that using swap space for {ml} jobs is acceptable. The
general best practice is to not use swap on {es} nodes.

--

`xpack.ml.max_model_memory_limit`::
(<<cluster-update-settings,Dynamic>>) The maximum `model_memory_limit` property
value that can be set for any {ml} jobs in this cluster. If you try to create a
job with a `model_memory_limit` property value that is greater than this setting
value, an error occurs. Existing jobs are not affected when you update this
setting. If this setting is `0` or unset, there is no maximum
`model_memory_limit` value. If there are no nodes that meet the memory
requirements for a job, this lack of a maximum memory limit means it's possible
to create jobs that cannot be assigned to any available nodes. For more
information about the `model_memory_limit` property, see
<<ml-put-job,Create {anomaly-jobs}>> or <<put-dfanalytics>>. Defaults to `0` if
`xpack.ml.use_auto_machine_memory_percent` is `false`. If
`xpack.ml.use_auto_machine_memory_percent` is `true` and
`xpack.ml.max_model_memory_limit` is not explicitly set then it will default to
the largest `model_memory_limit` that could be assigned in the cluster.

[[xpack.ml.max_open_jobs]]
`xpack.ml.max_open_jobs`::
(<<cluster-update-settings,Dynamic>>) The maximum number of jobs that can run
simultaneously on a node. In this context, jobs include both {anomaly-jobs} and 
{dfanalytics-jobs}. The maximum number of jobs is also constrained by memory 
usage. Thus if the estimated memory usage of the jobs would be higher than 
allowed, fewer jobs will run on a node. Prior to version 7.1, this setting was a 
per-node non-dynamic setting. It became a cluster-wide dynamic setting in
version 7.1. As a result, changes to its value after node startup are used only 
after every node in the cluster is running version 7.1 or higher. The minimum
value is `1`; the maximum value is `512`. Defaults to `512`.

`xpack.ml.nightly_maintenance_requests_per_second`::
(<<cluster-update-settings,Dynamic>>) The rate at which the nightly maintenance 
task deletes expired model snapshots and results. The setting is a proxy to the
<<docs-delete-by-query-throttle,`requests_per_second`>> parameter used in the 
delete by query requests and controls throttling. When the {operator-feature} is 
enabled, this setting can be updated only by operator users. Valid values must
be greater than `0.0` or equal to `-1.0`, where `-1.0` means a default value is
used. Defaults to `-1.0`

`xpack.ml.node_concurrent_job_allocations`::
(<<cluster-update-settings,Dynamic>>) The maximum number of jobs that can
concurrently be in the `opening` state on each node. Typically, jobs spend a
small amount of time in this state before they move to `open` state. Jobs that
must restore large models when they are opening spend more time in the `opening`
state. When the {operator-feature} is enabled, this setting can be updated only 
by operator users. Defaults to `2`.

[discrete]
[[advanced-ml-settings]]
==== Advanced machine learning settings

These settings are for advanced use cases; the default values are generally
sufficient:

`xpack.ml.enable_config_migration`::
(<<cluster-update-settings,Dynamic>>) Reserved. When the {operator-feature} is 
enabled, this setting can be updated only by operator users.

`xpack.ml.max_anomaly_records`::
(<<cluster-update-settings,Dynamic>>) The maximum number of records that are
output per bucket. Defaults to `500`.

`xpack.ml.max_lazy_ml_nodes`::
(<<cluster-update-settings,Dynamic>>) The number of lazily spun up {ml} nodes.
Useful in situations where {ml} nodes are not desired until the first {ml} job
opens. If the current number of {ml} nodes is greater than or equal to this 
setting, it is assumed that there are no more lazy nodes available as the
desired number of nodes have already been provisioned. If a job is opened and 
this setting has a value greater than zero and there are no nodes that can
accept the job, the job stays in the `OPENING` state until a new {ml} node is 
added to the cluster and the job is assigned to run on that node. When the
{operator-feature} is enabled, this setting can be updated only by operator
users. Defaults to `0`.
+
IMPORTANT: This setting assumes some external process is capable of adding {ml}
nodes to the cluster. This setting is only useful when used in conjunction with
such an external process.

`xpack.ml.max_ml_node_size`::
(<<cluster-update-settings,Dynamic>>)
The maximum node size for {ml} nodes in a deployment that supports automatic
cluster scaling. If you set it to the maximum possible size of future {ml} nodes,
when a {ml} job is assigned to a lazy node it can check (and fail quickly) when
scaling cannot support the size of the job. When the {operator-feature} is
enabled, this setting can be updated only by operator users. Defaults to `0b`,
which means it will be assumed that automatic cluster scaling can add arbitrarily large nodes to the cluster. 

`xpack.ml.persist_results_max_retries`::
(<<cluster-update-settings,Dynamic>>) The maximum number of times to retry bulk
indexing requests that fail while processing {ml} results. If the limit is
reached, the {ml} job stops processing data and its status is `failed`. When the
{operator-feature} is enabled, this setting can be updated only by operator
users. The minimum value is `0`; the maximum value is `50`. Defaults to `20`.

`xpack.ml.process_connect_timeout`::
(<<cluster-update-settings,Dynamic>>) The connection timeout for {ml} processes
that run separately from the {es} JVM. When such processes are started they must
connect to the {es} JVM. If the process does not connect within the time period
specified by this setting then the process is assumed to have failed. When the
{operator-feature} is enabled, this setting can be updated only by operator
users. The minimum value is `5s`. Defaults to `10s`.

`xpack.ml.use_auto_machine_memory_percent`::
(<<cluster-update-settings,Dynamic>>) If this setting is `true`, the
`xpack.ml.max_machine_memory_percent` setting is ignored. Instead, the maximum
percentage of the machine's memory that can be used for running {ml} analytics
processes is calculated automatically and takes into account the total node size
and the size of the JVM on the node. When the {operator-feature} is enabled, this
setting can be updated only by operator users. The default value is `false`.
+
--
[IMPORTANT]
====
* If you do not have dedicated {ml} nodes (that is to say, the node has
multiple roles), do not enable this setting. Its calculations assume that {ml}
analytics are the main purpose of the node.
* The calculation assumes that dedicated {ml} nodes have at least
`256MB` memory reserved outside of the JVM. If you have tiny {ml}
nodes in your cluster, you shouldn't use this setting.
====
--
+
If this setting is `true` it also affects the default value for
`xpack.ml.max_model_memory_limit`. In this case `xpack.ml.max_model_memory_limit`
defaults to the largest size that could be assigned in the current cluster.

[discrete]
[[model-inference-circuit-breaker]]
==== {ml-cap} circuit breaker settings

The relevant circuit breaker settings can be found in the <<circuit-breakers-page-model-inference, Circuit Breakers page>>.