[bsp][ls1c]change RT_USING_UART to RT_USING_SERIAL;remove some device init

bsp/ls1cdev/drivers/board.c

@@ -15,16 +15,11 @@
  */
 
 #include <rtthread.h>
-#include <drivers/spi.h>
 #include <rthw.h>
 
 #include "board.h"
 #include "uart.h"
 #include "ls1c.h"
-#include "ls1c_pin.h"
-#include "ls1c_spi.h"
-#include "ls1c_spi.h"
-#include "drv_spi.h"
 
 /**
  * @addtogroup Loongson LS1B
@@ -86,7 +81,7 @@ void rt_hw_fpu_init(void)
  */
 void rt_hw_board_init(void)
 {
-#ifdef RT_USING_UART
+#ifdef RT_USING_SERIAL
 	/* init hardware UART device */
 	rt_hw_uart_init();
 #endif
@@ -95,134 +90,20 @@ void rt_hw_board_init(void)
 	/* set console device */
 	rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
 #endif
-
-#ifdef RT_USING_CAN
-	/* init hardware CAN device */
-	ls1c_bxcan_init();
-#endif
-
-
-#ifdef RT_USING_I2C
-#ifdef RT_USING_I2C0
-/*
-	pin_set_purpose(2, PIN_PURPOSE_OTHER);
-	pin_set_purpose(3, PIN_PURPOSE_OTHER);
-	pin_set_remap(2, PIN_REMAP_SECOND);
-	pin_set_remap(3, PIN_REMAP_SECOND);
-	*/
-#endif
-#ifdef RT_USING_I2C1
-	pin_set_purpose(2, PIN_PURPOSE_OTHER);
-	pin_set_purpose(3, PIN_PURPOSE_OTHER);
-	pin_set_remap(2, PIN_REMAP_SECOND);
-	pin_set_remap(3, PIN_REMAP_SECOND);
-#endif
-#ifdef RT_USING_I2C2
-	pin_set_purpose(51, PIN_PURPOSE_OTHER);
-	pin_set_purpose(50, PIN_PURPOSE_OTHER);
-	pin_set_remap(51, PIN_REMAP_FOURTH);
-	pin_set_remap(50, PIN_REMAP_FOURTH);
-#endif
-	rt_i2c_init();
-#endif
-
-#ifdef RT_USING_SPI
-
-#ifdef RT_USING_SPI0
-	pin_set_purpose(78, PIN_PURPOSE_OTHER);
-	pin_set_purpose(79, PIN_PURPOSE_OTHER);
-	pin_set_purpose(80, PIN_PURPOSE_OTHER);
-	pin_set_purpose(83, PIN_PURPOSE_OTHER);//cs2 - SD card
-	pin_set_purpose(82, PIN_PURPOSE_OTHER);//cs1 
-	pin_set_remap(78, PIN_REMAP_FOURTH);
-	pin_set_remap(79, PIN_REMAP_FOURTH);
-	pin_set_remap(80, PIN_REMAP_FOURTH);
-	pin_set_remap(83, PIN_REMAP_FOURTH);//cs2 - SD card
-	pin_set_remap(82, PIN_REMAP_FOURTH);//cs1 
-	ls1c_spi_bus_register(LS1C_SPI_0,"spi0");
-#endif
-
-#ifdef RT_USING_SPI1
-	pin_set_purpose(46, PIN_PURPOSE_OTHER);
-	pin_set_purpose(47, PIN_PURPOSE_OTHER);
-	pin_set_purpose(48, PIN_PURPOSE_OTHER);
-	pin_set_purpose(49, PIN_PURPOSE_OTHER);//CS0 - touch screen
-	pin_set_remap(46, PIN_REMAP_THIRD);
-	pin_set_remap(47, PIN_REMAP_THIRD);
-	pin_set_remap(48, PIN_REMAP_THIRD);
-	pin_set_remap(49, PIN_REMAP_THIRD);//CS0 - touch screen
-	ls1c_spi_bus_register(LS1C_SPI_1,"spi1");
-
-#endif
-#ifdef RT_USING_SPI0
-    /* attach cs */
-    {
-        static struct rt_spi_device spi_device1;
-        static struct rt_spi_device spi_device2;
-        static struct ls1c_spi_cs  spi_cs1;
-        static struct ls1c_spi_cs  spi_cs2;
-
-        /* spi02: CS2  SD Card*/
-        spi_cs2.cs = LS1C_SPI_CS_2;
-        rt_spi_bus_attach_device(&spi_device2, "spi02", "spi0", (void*)&spi_cs2);
-        spi_cs1.cs = LS1C_SPI_CS_1;
-        rt_spi_bus_attach_device(&spi_device1, "spi01", "spi0", (void*)&spi_cs1);
-        msd_init("sd0", "spi02");
-	}
-#endif
-#ifdef RT_USING_SPI1	
-    {
-        static struct rt_spi_device spi_device;
-        static struct ls1c_spi_cs  spi_cs;
-
-        /* spi10: CS0  Touch*/
-        spi_cs.cs = LS1C_SPI_CS_0;
-       rt_spi_bus_attach_device(&spi_device, "spi10", "spi1", (void*)&spi_cs);
-	}
-#endif
-
-#endif
-
-
-
-	/* init operating system timer */
-	rt_hw_timer_init();
+    /* init operating system timer */
+    rt_hw_timer_init();
 
 #ifdef RT_USING_FPU
     /* init hardware fpu */
     rt_hw_fpu_init();
 #endif
 
-	rt_kprintf("current sr: 0x%08x\n", read_c0_status());
-}
-
-
-#ifdef RT_USING_RTGUI
-#include <rtgui/driver.h>
-#include "display_controller.h"
-/* initialize for gui driver */
-int rtgui_lcd_init(void)
-{
-	rt_device_t dc;
-       rt_kprintf("DC initied\n");
-
-	pin_set_purpose(76, PIN_PURPOSE_OTHER);
-	pin_set_remap(76, PIN_REMAP_DEFAULT);
-	
-	/* init Display Controller */
-	rt_hw_dc_init();
-
-	/* find Display Controller device */
-	dc = rt_device_find("dc");
-
-	/* set Display Controller device as rtgui graphic driver */
-	rtgui_graphic_set_device(dc);
+#ifdef RT_USING_COMPONENTS_INIT
+    rt_components_board_init();
+#endif
 
-	
-    return 0;
+    rt_kprintf("current sr: 0x%08x\n", read_c0_status());
 }
-INIT_DEVICE_EXPORT(rtgui_lcd_init);
-#endif
 
 #define __raw_out_put(unr) \
 	while (*ptr) \