修改之前BSP版本存在的一些问题，使之符合规范

bsp/stm32/stm32f103-dofly-lyc8/.config

@@ -320,7 +320,7 @@ CONFIG_SOC_SERIES_STM32F1=y
 #
 # Hardware Drivers Config
 #
-CONFIG_SOC_STM32F103c8=y
+CONFIG_SOC_STM32F103C8=y
 
 #
 # Onboard Peripheral Drivers
@@ -329,8 +329,10 @@ CONFIG_SOC_STM32F103c8=y
 #
 # On-chip Peripheral Drivers
 #
-# CONFIG_BSP_USING_GPIO is not set
+CONFIG_BSP_USING_GPIO=y
+CONFIG_BSP_USING_UART=y
 CONFIG_BSP_USING_UART1=y
+# CONFIG_BSP_UART1_RX_USING_DMA is not set
 
 #
 # Board extended module Drivers

bsp/stm32/stm32f103-dofly-lyc8/README.md

@@ -1,5 +1,5 @@
 
-# STM32F103 霸道开发板 BSP 说明
+# STM32F103 德飞莱开发板 BSP 说明
 
 ## 简介
 
@@ -26,7 +26,6 @@ LY-STM32F103C8V1.2 是德飞莱推出的一款基于 ARM Cortex-M3 内核的开
 - MCU：STM32F103C8T6，主频 72MHz，64KB FLASH ，20KB RAM
 - 常用外设
   - LED：1个普通LED，LED1（红色，PB8）
-- 常用接口：USB 转串口
 - 调试接口，标准 JTAG/SWD
 
 ## 外设支持
@@ -35,16 +34,16 @@ LY-STM32F103C8V1.2 是德飞莱推出的一款基于 ARM Cortex-M3 内核的开
 
 | **板载外设**      | **支持情况** | **备注**                              |
 | :----------------- | :----------: | :------------------------------------- |
-| USB 转串口        |     支持     |                                       |
+| 	红色LED          |     支持     |      使用PB8                         |
 | **片上外设**      | **支持情况** | **备注**                              |
 | GPIO              |     支持     | PA0, PA1... PB15 ---> PIN: 0, 1...47|
 | UART              |     支持     | UART1                            |
-| SPI               |    暂不支持     |                              |
-| I2C               |     暂不支持     |                              |
-| RTC               |   暂不支持   |                             |
-| PWM               |   暂不支持   |                               |
-| **扩展模块**      | **支持情况** | **备注**                              |
-|          |     |                                      |
+| SPI               |    暂不支持  | 即将支持                         |
+| I2C               |    暂不支持  | 即将支持                         |
+| ADC               |    暂不支持  | 即将支持                         |
+| PWM               |    暂不支持  | 即将支持                         |
+| **扩展模块**      | **支持情况** | **备注**                         |
+|                   |              |                                  |
 
 ## 使用说明
 
@@ -88,7 +87,7 @@ msh >
 ```
 ### 进阶使用
 
-此 BSP 默认只开启了 GPIO 和 串口1 的功能，如果需使用 SD 卡、Flash 等更多高级功能，需要利用 ENV 工具对BSP 进行配置，步骤如下：
+此 BSP 默认只开启了 GPIO 和 串口1 的功能，如果需使用 ADC、PWM等更多高级功能，需要利用 ENV 工具对BSP 进行配置，步骤如下：
 
 1. 在 bsp 下打开 env 工具。
 

bsp/stm32/stm32f103-dofly-lyc8/board/Kconfig

@@ -1,6 +1,6 @@
 menu "Hardware Drivers Config"
 
-config SOC_STM32F103c8
+config SOC_STM32F103C8
     bool
     select SOC_SERIES_STM32F1
     default y
@@ -16,11 +16,21 @@ menu "On-chip Peripheral Drivers"
         select RT_USING_PIN
         default y
 
-    config BSP_USING_UART1
-        bool "Enable UART1"
-        select RT_USING_SERIAL
+    menuconfig BSP_USING_UART
+        bool "Enable UART"
         default y
-		
+        select RT_USING_SERIAL
+        if BSP_USING_UART
+            config BSP_USING_UART1
+                bool "Enable UART1"
+                default y
+
+            config BSP_UART1_RX_USING_DMA
+                bool "Enable UART1 RX DMA"
+                depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                default n
+        endif
+
 endmenu
 
 menu "Board extended module Drivers"

bsp/stm32/stm32f103-dofly-lyc8/board/linker_scripts/link.lds

@@ -5,7 +5,7 @@
 /* Program Entry, set to mark it as "used" and avoid gc */
 MEMORY
 {
-    ROM (rx) : ORIGIN = 0x08000000, LENGTH = 64k /* 128KB flash */
+    ROM (rx) : ORIGIN = 0x08000000, LENGTH = 64k /* 64KB flash */
     RAM (rw) : ORIGIN = 0x20000000, LENGTH =  20k /* 20K sram */
 }
 ENTRY(Reset_Handler)

bsp/stm32/stm32f103-dofly-lyc8/project.uvoptx

@@ -127,7 +127,7 @@
         <tRSysVw>1</tRSysVw>
         <sRunDeb>0</sRunDeb>
         <sLrtime>0</sLrtime>
-        <nTsel>3</nTsel>
+        <nTsel>5</nTsel>
         <sDll></sDll>
         <sDllPa></sDllPa>
         <sDlgDll></sDlgDll>
@@ -138,7 +138,7 @@
         <tDlgDll></tDlgDll>
         <tDlgPa></tDlgPa>
         <tIfile></tIfile>
-        <pMon>Segger\JL2CM3.dll</pMon>
+        <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
       </DebugOpt>
       <TargetDriverDllRegistry>
         <SetRegEntry>
@@ -149,7 +149,7 @@
         <SetRegEntry>
           <Number>0</Number>
           <Key>JL2CM3</Key>
-          <Name>-U4294967295 -O14 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight JTAG-DP") -D00(3BA00477) -L00(4) -N01("ST TMC") -D01(16410041) -L01(5) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM)</Name>
+          <Name>-U30000299 -O78 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(4) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN0</Name>
         </SetRegEntry>
         <SetRegEntry>
           <Number>0</Number>
@@ -203,7 +203,7 @@
   </Target>
 
   <Group>
-    <GroupName>Applications</GroupName>
+    <GroupName>Kernel</GroupName>
     <tvExp>1</tvExp>
     <tvExpOptDlg>0</tvExpOptDlg>
     <cbSel>0</cbSel>
@@ -215,207 +215,207 @@
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>applications\main.c</PathWithFileName>
-      <FilenameWithoutPath>main.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\src\clock.c</PathWithFileName>
+      <FilenameWithoutPath>clock.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
-  </Group>
-
-  <Group>
-    <GroupName>Drivers</GroupName>
-    <tvExp>0</tvExp>
-    <tvExpOptDlg>0</tvExpOptDlg>
-    <cbSel>0</cbSel>
-    <RteFlg>0</RteFlg>
     <File>
-      <GroupNumber>2</GroupNumber>
+      <GroupNumber>1</GroupNumber>
       <FileNumber>2</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>board\board.c</PathWithFileName>
-      <FilenameWithoutPath>board.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\src\components.c</PathWithFileName>
+      <FilenameWithoutPath>components.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
     <File>
-      <GroupNumber>2</GroupNumber>
+      <GroupNumber>1</GroupNumber>
       <FileNumber>3</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>board\CubeMX_Config\Src\stm32f1xx_hal_msp.c</PathWithFileName>
-      <FilenameWithoutPath>stm32f1xx_hal_msp.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\src\cpu.c</PathWithFileName>
+      <FilenameWithoutPath>cpu.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
     <File>
-      <GroupNumber>2</GroupNumber>
+      <GroupNumber>1</GroupNumber>
       <FileNumber>4</FileNumber>
-      <FileType>2</FileType>
+      <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\arm\startup_stm32f103xb.s</PathWithFileName>
-      <FilenameWithoutPath>startup_stm32f103xb.s</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\src\device.c</PathWithFileName>
+      <FilenameWithoutPath>device.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
     <File>
-      <GroupNumber>2</GroupNumber>
+      <GroupNumber>1</GroupNumber>
       <FileNumber>5</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\HAL_Drivers\drv_gpio.c</PathWithFileName>
-      <FilenameWithoutPath>drv_gpio.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\src\idle.c</PathWithFileName>
+      <FilenameWithoutPath>idle.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
     <File>
-      <GroupNumber>2</GroupNumber>
+      <GroupNumber>1</GroupNumber>
       <FileNumber>6</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\HAL_Drivers\drv_usart.c</PathWithFileName>
-      <FilenameWithoutPath>drv_usart.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\src\ipc.c</PathWithFileName>
+      <FilenameWithoutPath>ipc.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
     <File>
-      <GroupNumber>2</GroupNumber>
+      <GroupNumber>1</GroupNumber>
       <FileNumber>7</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\HAL_Drivers\drv_common.c</PathWithFileName>
-      <FilenameWithoutPath>drv_common.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\src\irq.c</PathWithFileName>
+      <FilenameWithoutPath>irq.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
-  </Group>
-
-  <Group>
-    <GroupName>Kernel</GroupName>
-    <tvExp>1</tvExp>
-    <tvExpOptDlg>0</tvExpOptDlg>
-    <cbSel>0</cbSel>
-    <RteFlg>0</RteFlg>
     <File>
-      <GroupNumber>3</GroupNumber>
+      <GroupNumber>1</GroupNumber>
       <FileNumber>8</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\clock.c</PathWithFileName>
-      <FilenameWithoutPath>clock.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\src\kservice.c</PathWithFileName>
+      <FilenameWithoutPath>kservice.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
     <File>
-      <GroupNumber>3</GroupNumber>
+      <GroupNumber>1</GroupNumber>
       <FileNumber>9</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\components.c</PathWithFileName>
-      <FilenameWithoutPath>components.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\src\mem.c</PathWithFileName>
+      <FilenameWithoutPath>mem.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
     <File>
-      <GroupNumber>3</GroupNumber>
+      <GroupNumber>1</GroupNumber>
       <FileNumber>10</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\cpu.c</PathWithFileName>
-      <FilenameWithoutPath>cpu.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\src\mempool.c</PathWithFileName>
+      <FilenameWithoutPath>mempool.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
     <File>
-      <GroupNumber>3</GroupNumber>
+      <GroupNumber>1</GroupNumber>
       <FileNumber>11</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\device.c</PathWithFileName>
-      <FilenameWithoutPath>device.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\src\object.c</PathWithFileName>
+      <FilenameWithoutPath>object.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
     <File>
-      <GroupNumber>3</GroupNumber>
+      <GroupNumber>1</GroupNumber>
       <FileNumber>12</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\idle.c</PathWithFileName>
-      <FilenameWithoutPath>idle.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\src\scheduler.c</PathWithFileName>
+      <FilenameWithoutPath>scheduler.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
     <File>
-      <GroupNumber>3</GroupNumber>
+      <GroupNumber>1</GroupNumber>
       <FileNumber>13</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\ipc.c</PathWithFileName>
-      <FilenameWithoutPath>ipc.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\src\signal.c</PathWithFileName>
+      <FilenameWithoutPath>signal.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
     <File>
-      <GroupNumber>3</GroupNumber>
+      <GroupNumber>1</GroupNumber>
       <FileNumber>14</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\irq.c</PathWithFileName>
-      <FilenameWithoutPath>irq.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\src\thread.c</PathWithFileName>
+      <FilenameWithoutPath>thread.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
     <File>
-      <GroupNumber>3</GroupNumber>
+      <GroupNumber>1</GroupNumber>
       <FileNumber>15</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\kservice.c</PathWithFileName>
-      <FilenameWithoutPath>kservice.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\src\timer.c</PathWithFileName>
+      <FilenameWithoutPath>timer.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
+  </Group>
+
+  <Group>
+    <GroupName>Applications</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
     <File>
-      <GroupNumber>3</GroupNumber>
+      <GroupNumber>2</GroupNumber>
       <FileNumber>16</FileNumber>
       <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\mem.c</PathWithFileName>
-      <FilenameWithoutPath>mem.c</FilenameWithoutPath>
+      <PathWithFileName>applications\main.c</PathWithFileName>
+      <FilenameWithoutPath>main.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
+  </Group>
+
+  <Group>
+    <GroupName>Drivers</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
     <File>
       <GroupNumber>3</GroupNumber>
       <FileNumber>17</FileNumber>
@@ -423,8 +423,8 @@
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\mempool.c</PathWithFileName>
-      <FilenameWithoutPath>mempool.c</FilenameWithoutPath>
+      <PathWithFileName>board\board.c</PathWithFileName>
+      <FilenameWithoutPath>board.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
@@ -435,20 +435,20 @@
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\object.c</PathWithFileName>
-      <FilenameWithoutPath>object.c</FilenameWithoutPath>
+      <PathWithFileName>board\CubeMX_Config\Src\stm32f1xx_hal_msp.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f1xx_hal_msp.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
     <File>
       <GroupNumber>3</GroupNumber>
       <FileNumber>19</FileNumber>
-      <FileType>1</FileType>
+      <FileType>2</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\scheduler.c</PathWithFileName>
-      <FilenameWithoutPath>scheduler.c</FilenameWithoutPath>
+      <PathWithFileName>..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\arm\startup_stm32f103xb.s</PathWithFileName>
+      <FilenameWithoutPath>startup_stm32f103xb.s</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
@@ -459,8 +459,8 @@
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\signal.c</PathWithFileName>
-      <FilenameWithoutPath>signal.c</FilenameWithoutPath>
+      <PathWithFileName>..\libraries\HAL_Drivers\drv_gpio.c</PathWithFileName>
+      <FilenameWithoutPath>drv_gpio.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
@@ -471,8 +471,8 @@
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\thread.c</PathWithFileName>
-      <FilenameWithoutPath>thread.c</FilenameWithoutPath>
+      <PathWithFileName>..\libraries\HAL_Drivers\drv_usart.c</PathWithFileName>
+      <FilenameWithoutPath>drv_usart.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
@@ -483,16 +483,16 @@
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\timer.c</PathWithFileName>
-      <FilenameWithoutPath>timer.c</FilenameWithoutPath>
+      <PathWithFileName>..\libraries\HAL_Drivers\drv_common.c</PathWithFileName>
+      <FilenameWithoutPath>drv_common.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
   </Group>
 
   <Group>
-    <GroupName>CORTEX-M3</GroupName>
-    <tvExp>1</tvExp>
+    <GroupName>cpu</GroupName>
+    <tvExp>0</tvExp>
     <tvExpOptDlg>0</tvExpOptDlg>
     <cbSel>0</cbSel>
     <RteFlg>0</RteFlg>
@@ -503,20 +503,20 @@
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\libcpu\arm\cortex-m3\cpuport.c</PathWithFileName>
-      <FilenameWithoutPath>cpuport.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\libcpu\arm\common\backtrace.c</PathWithFileName>
+      <FilenameWithoutPath>backtrace.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
     <File>
       <GroupNumber>4</GroupNumber>
       <FileNumber>24</FileNumber>
-      <FileType>2</FileType>
+      <FileType>1</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\libcpu\arm\cortex-m3\context_rvds.S</PathWithFileName>
-      <FilenameWithoutPath>context_rvds.S</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\libcpu\arm\common\div0.c</PathWithFileName>
+      <FilenameWithoutPath>div0.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
@@ -527,8 +527,8 @@
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\libcpu\arm\common\backtrace.c</PathWithFileName>
-      <FilenameWithoutPath>backtrace.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\libcpu\arm\common\showmem.c</PathWithFileName>
+      <FilenameWithoutPath>showmem.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
@@ -539,20 +539,20 @@
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\libcpu\arm\common\div0.c</PathWithFileName>
-      <FilenameWithoutPath>div0.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\libcpu\arm\cortex-m3\cpuport.c</PathWithFileName>
+      <FilenameWithoutPath>cpuport.c</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
     <File>
       <GroupNumber>4</GroupNumber>
       <FileNumber>27</FileNumber>
-      <FileType>1</FileType>
+      <FileType>2</FileType>
       <tvExp>0</tvExp>
       <tvExpOptDlg>0</tvExpOptDlg>
       <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\libcpu\arm\common\showmem.c</PathWithFileName>
-      <FilenameWithoutPath>showmem.c</FilenameWithoutPath>
+      <PathWithFileName>..\..\..\libcpu\arm\cortex-m3\context_rvds.S</PathWithFileName>
+      <FilenameWithoutPath>context_rvds.S</FilenameWithoutPath>
       <RteFlg>0</RteFlg>
       <bShared>0</bShared>
     </File>
@@ -560,7 +560,7 @@
 
   <Group>
     <GroupName>DeviceDrivers</GroupName>
-    <tvExp>1</tvExp>
+    <tvExp>0</tvExp>
     <tvExpOptDlg>0</tvExpOptDlg>
     <cbSel>0</cbSel>
     <RteFlg>0</RteFlg>

bsp/stm32/stm32f103-dofly-lyc8/project.uvprojx

@@ -53,7 +53,7 @@
           <CreateLib>0</CreateLib>
           <CreateHexFile>0</CreateHexFile>
           <DebugInformation>1</DebugInformation>
-          <BrowseInformation>1</BrowseInformation>
+          <BrowseInformation>0</BrowseInformation>
           <ListingPath>.\build\keil\List\</ListingPath>
           <HexFormatSelection>1</HexFormatSelection>
           <Merge32K>0</Merge32K>
@@ -334,7 +334,7 @@
               <MiscControls></MiscControls>
               <Define>STM32F103xB, USE_HAL_DRIVER</Define>
               <Undefine></Undefine>
-              <IncludePath>applications;.;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\include;..\..\..\libcpu\arm\cortex-m3;..\..\..\libcpu\arm\common;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Include;..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Inc;..\libraries\STM32F1xx_HAL\CMSIS\Include</IncludePath>
+              <IncludePath>.;..\..\..\include;applications;.;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m3;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Include;..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Inc;..\libraries\STM32F1xx_HAL\CMSIS\Include</IncludePath>
             </VariousControls>
           </Cads>
           <Aads>
@@ -367,58 +367,13 @@
             <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
             <IncludeLibs></IncludeLibs>
             <IncludeLibsPath></IncludeLibsPath>
-            <Misc>--keep *.o(.rti_fn.*)   --keep *.o(FSymTab)</Misc>
+            <Misc> --keep *.o(.rti_fn.*)   --keep *.o(FSymTab)</Misc>
             <LinkerInputFile></LinkerInputFile>
             <DisabledWarnings></DisabledWarnings>
           </LDads>
         </TargetArmAds>
       </TargetOption>
       <Groups>
-        <Group>
-          <GroupName>Applications</GroupName>
-          <Files>
-            <File>
-              <FileName>main.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>applications\main.c</FilePath>
-            </File>
-          </Files>
-        </Group>
-        <Group>
-          <GroupName>Drivers</GroupName>
-          <Files>
-            <File>
-              <FileName>board.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>board\board.c</FilePath>
-            </File>
-            <File>
-              <FileName>stm32f1xx_hal_msp.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>board\CubeMX_Config\Src\stm32f1xx_hal_msp.c</FilePath>
-            </File>
-            <File>
-              <FileName>startup_stm32f103xb.s</FileName>
-              <FileType>2</FileType>
-              <FilePath>..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\arm\startup_stm32f103xb.s</FilePath>
-            </File>
-            <File>
-              <FileName>drv_gpio.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
-            </File>
-            <File>
-              <FileName>drv_usart.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
-            </File>
-            <File>
-              <FileName>drv_common.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\libraries\HAL_Drivers\drv_common.c</FilePath>
-            </File>
-          </Files>
-        </Group>
         <Group>
           <GroupName>Kernel</GroupName>
           <Files>
@@ -500,18 +455,53 @@
           </Files>
         </Group>
         <Group>
-          <GroupName>CORTEX-M3</GroupName>
+          <GroupName>Applications</GroupName>
           <Files>
             <File>
-              <FileName>cpuport.c</FileName>
+              <FileName>main.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\libcpu\arm\cortex-m3\cpuport.c</FilePath>
+              <FilePath>applications\main.c</FilePath>
             </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Drivers</GroupName>
+          <Files>
             <File>
-              <FileName>context_rvds.S</FileName>
+              <FileName>board.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>board\board.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32f1xx_hal_msp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>board\CubeMX_Config\Src\stm32f1xx_hal_msp.c</FilePath>
+            </File>
+            <File>
+              <FileName>startup_stm32f103xb.s</FileName>
               <FileType>2</FileType>
-              <FilePath>..\..\..\libcpu\arm\cortex-m3\context_rvds.S</FilePath>
+              <FilePath>..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\arm\startup_stm32f103xb.s</FilePath>
+            </File>
+            <File>
+              <FileName>drv_gpio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
             </File>
+            <File>
+              <FileName>drv_usart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
+            </File>
+            <File>
+              <FileName>drv_common.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\HAL_Drivers\drv_common.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>cpu</GroupName>
+          <Files>
             <File>
               <FileName>backtrace.c</FileName>
               <FileType>1</FileType>
@@ -527,6 +517,16 @@
               <FileType>1</FileType>
               <FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath>
             </File>
+            <File>
+              <FileName>cpuport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\cortex-m3\cpuport.c</FilePath>
+            </File>
+            <File>
+              <FileName>context_rvds.S</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\libcpu\arm\cortex-m3\context_rvds.S</FilePath>
+            </File>
           </Files>
         </Group>
         <Group>

bsp/stm32/stm32f103-dofly-lyc8/rtconfig.h

@@ -161,12 +161,14 @@
 
 /* Hardware Drivers Config */
 
-#define SOC_STM32F103c8
+#define SOC_STM32F103C8
 
 /* Onboard Peripheral Drivers */
 
 /* On-chip Peripheral Drivers */
 
+#define BSP_USING_GPIO
+#define BSP_USING_UART
 #define BSP_USING_UART1
 
 /* Board extended module Drivers */