[bsp][hc32][spi]update rt_hw_spi_device_attach

bsp/hc32/ev_hc32f448_lqfp80/board/ports/drv_spi_flash.c

@@ -27,8 +27,7 @@
 #define SPI_BUS_NAME                    "spi1"
 #define SPI_FLASH_DEVICE_NAME           "spi10"
 #define SPI_FLASH_CHIP                  "w25q64"
-#define SPI_FLASH_SS_PORT               GPIO_PORT_C
-#define SPI_FLASH_SS_PIN                GPIO_PIN_07
+#define SPI_FLASH_SS_PIN                GET_PIN(C, 7)
 /* Partition Name */
 #define FS_PARTITION_NAME              "filesystem"
 
@@ -55,7 +54,7 @@ static void rt_hw_spi_flash_reset(char *spi_dev_name)
 
 static int rt_hw_spi_flash_with_sfud_init(void)
 {
-    rt_hw_spi_device_attach(SPI_BUS_NAME, SPI_FLASH_DEVICE_NAME, SPI_FLASH_SS_PORT, SPI_FLASH_SS_PIN);
+    rt_hw_spi_device_attach(SPI_BUS_NAME, SPI_FLASH_DEVICE_NAME, SPI_FLASH_SS_PIN);
 
     if (RT_NULL == rt_sfud_flash_probe(SPI_FLASH_CHIP, SPI_FLASH_DEVICE_NAME))
     {

bsp/hc32/ev_hc32f460_lqfp100_v2/board/ports/drv_spi_flash.c

@@ -26,8 +26,7 @@
 #define SPI_BUS_NAME                    "spi3"
 #define SPI_FLASH_DEVICE_NAME           "spi30"
 #define SPI_FLASH_CHIP                  "w25q64"
-#define SPI_FLASH_SS_PORT               GPIO_PORT_C
-#define SPI_FLASH_SS_PIN                GPIO_PIN_07
+#define SPI_FLASH_SS_PIN                GET_PIN(C, 7)
 /* Partition Name */
 #define FS_PARTITION_NAME              "filesystem"
 
@@ -54,7 +53,7 @@ static void rt_hw_spi_flash_reset(char *spi_dev_name)
 
 static int rt_hw_spi_flash_with_sfud_init(void)
 {
-    rt_hw_spi_device_attach(SPI_BUS_NAME, SPI_FLASH_DEVICE_NAME, SPI_FLASH_SS_PORT, SPI_FLASH_SS_PIN);
+    rt_hw_spi_device_attach(SPI_BUS_NAME, SPI_FLASH_DEVICE_NAME, SPI_FLASH_SS_PIN);
 
     if (RT_NULL == rt_sfud_flash_probe(SPI_FLASH_CHIP, SPI_FLASH_DEVICE_NAME))
     {

bsp/hc32/ev_hc32f4a0_lqfp176/board/ports/drv_spi_flash.c

@@ -26,8 +26,7 @@
 #define SPI_BUS_NAME                    "spi1"
 #define SPI_FLASH_DEVICE_NAME           "spi10"
 #define SPI_FLASH_CHIP                  "w25q64"
-#define SPI_FLASH_SS_PORT               GPIO_PORT_C
-#define SPI_FLASH_SS_PIN                GPIO_PIN_07
+#define SPI_FLASH_SS_PIN                GET_PIN(C, 7)
 /* Partition Name */
 #define FS_PARTITION_NAME              "filesystem"
 
@@ -54,7 +53,7 @@ static void rt_hw_spi_flash_reset(char *spi_dev_name)
 
 static int rt_hw_spi_flash_with_sfud_init(void)
 {
-    rt_hw_spi_device_attach(SPI_BUS_NAME, SPI_FLASH_DEVICE_NAME, SPI_FLASH_SS_PORT, SPI_FLASH_SS_PIN);
+    rt_hw_spi_device_attach(SPI_BUS_NAME, SPI_FLASH_DEVICE_NAME, SPI_FLASH_SS_PIN);
 
     if (RT_NULL == rt_sfud_flash_probe(SPI_FLASH_CHIP, SPI_FLASH_DEVICE_NAME))
     {

bsp/hc32/lckfb-hc32f4a0-lqfp100/board/ports/drv_spi_flash.c

@@ -26,8 +26,7 @@
 #define SPI_BUS_NAME                    "spi1"
 #define SPI_FLASH_DEVICE_NAME           "spi10"
 #define SPI_FLASH_CHIP                  "w25q64"
-#define SPI_FLASH_SS_PORT               GPIO_PORT_A
-#define SPI_FLASH_SS_PIN                GPIO_PIN_04
+#define SPI_FLASH_SS_PIN                GET_PIN(A, 4)
 /* Partition Name */
 #define FS_PARTITION_NAME              "filesystem"
 
@@ -54,7 +53,7 @@ static void rt_hw_spi_flash_reset(char *spi_dev_name)
 
 static int rt_hw_spi_flash_with_sfud_init(void)
 {
-    rt_hw_spi_device_attach(SPI_BUS_NAME, SPI_FLASH_DEVICE_NAME, SPI_FLASH_SS_PORT, SPI_FLASH_SS_PIN);
+    rt_hw_spi_device_attach(SPI_BUS_NAME, SPI_FLASH_DEVICE_NAME, SPI_FLASH_SS_PIN);
 
     if (RT_NULL == rt_sfud_flash_probe(SPI_FLASH_CHIP, SPI_FLASH_DEVICE_NAME))
     {

bsp/hc32/libraries/hc32_drivers/drv_spi.c

@@ -508,7 +508,7 @@ static rt_ssize_t hc32_spi_xfer(struct rt_spi_device *device, struct rt_spi_mess
         else
             rt_pin_write(device->cs_pin, PIN_LOW);
     }
-    
+
     LOG_D("%s transfer prepare and start", spi_drv->config->bus_name);
     LOG_D("%s sendbuf: %X, recvbuf: %X, length: %d", spi_drv->config->bus_name,
           (uint32_t)message->send_buf, (uint32_t)message->recv_buf, message->length);
@@ -637,30 +637,19 @@ static const struct rt_spi_ops hc32_spi_ops =
 /**
   * Attach the spi device to SPI bus, this function must be used after initialization.
   */
-rt_err_t rt_hw_spi_device_attach(const char *bus_name, const char *device_name, uint8_t cs_gpio_port, uint16_t cs_gpio_pin)
+rt_err_t rt_hw_spi_device_attach(const char *bus_name, const char *device_name, rt_base_t cs_pin)
 {
     RT_ASSERT(bus_name != RT_NULL);
     RT_ASSERT(device_name != RT_NULL);
 
     rt_err_t result;
     struct rt_spi_device *spi_device;
-    struct hc32_hw_spi_cs *cs_pin;
-    stc_gpio_init_t stcGpioInit;
-
-    GPIO_StructInit(&stcGpioInit);
-    stcGpioInit.u16PinState = PIN_STAT_SET;
-    stcGpioInit.u16PinDir   = PIN_DIR_OUT;
-    stcGpioInit.u16PullUp   = PIN_PU_ON;
-    GPIO_Init(cs_gpio_port, cs_gpio_pin, &stcGpioInit);
 
     /* attach the device to spi bus*/
     spi_device = (struct rt_spi_device *)rt_malloc(sizeof(struct rt_spi_device));
     RT_ASSERT(spi_device != RT_NULL);
-    cs_pin = (struct hc32_hw_spi_cs *)rt_malloc(sizeof(struct hc32_hw_spi_cs));
-    RT_ASSERT(cs_pin != RT_NULL);
-    cs_pin->port = cs_gpio_port;
-    cs_pin->pin  = cs_gpio_pin;
-    result = rt_spi_bus_attach_device(spi_device, device_name, bus_name, (void *)cs_pin);
+
+    result = rt_spi_bus_attach_device_cspin(spi_device, device_name, bus_name, cs_pin, RT_NULL);
 
     if (result != RT_EOK)
     {

bsp/hc32/libraries/hc32_drivers/drv_spi.h

@@ -24,13 +24,6 @@
 extern "C" {
 #endif
 
-
-struct hc32_hw_spi_cs
-{
-    rt_uint8_t  port;
-    rt_uint16_t pin;
-};
-
 struct hc32_spi_irq_config
 {
     struct hc32_irq_config irq_config;
@@ -58,7 +51,7 @@ struct hc32_spi
     rt_uint16_t                 spi_dma_flag;
 };
 
-rt_err_t rt_hw_spi_device_attach(const char *bus_name, const char *device_name, uint8_t cs_gpio_port, uint16_t cs_gpio_pin);
+rt_err_t rt_hw_spi_device_attach(const char *bus_name, const char *device_name, rt_base_t cs_pin);
 
 
 #ifdef __cplusplus

bsp/hc32/platform/sfud/drv_spi_flash.c

@@ -27,20 +27,17 @@
     #define SPI_BUS_NAME                "spi1"
     #define SPI_FLASH_DEVICE_NAME       "spi10"
     #define SPI_FLASH_CHIP              "w25q64"
-    #define SPI_FLASH_SS_PORT           GPIO_PORT_C
-    #define SPI_FLASH_SS_PIN            GPIO_PIN_07
+    #define SPI_FLASH_SS_PIN            GET_PIN(C, 7)
 #elif defined(HC32F460)
     #define SPI_BUS_NAME                "spi3"
     #define SPI_FLASH_DEVICE_NAME       "spi30"
     #define SPI_FLASH_CHIP              "w25q64"
-    #define SPI_FLASH_SS_PORT           GPIO_PORT_C
-    #define SPI_FLASH_SS_PIN            GPIO_PIN_07
+    #define SPI_FLASH_SS_PIN            GET_PIN(C, 7)
 #elif defined(HC32F472)
     #define SPI_BUS_NAME                "spi1"
     #define SPI_FLASH_DEVICE_NAME       "spi10"
     #define SPI_FLASH_CHIP              "w25q64"
-    #define SPI_FLASH_SS_PORT           GPIO_PORT_B
-    #define SPI_FLASH_SS_PIN            GPIO_PIN_12
+    #define SPI_FLASH_SS_PIN            GET_PIN(B,12)
 #endif
 #define SPI_FLASH_CMD_ENABLE_RESET      0x66
 #define SPI_FLASH_CMD_RESET_DEVICE      0x99
@@ -72,7 +69,7 @@ static void rt_hw_spi_flash_reset(char *spi_dev_name)
 
 static int rt_hw_spi_flash_with_sfud_init(void)
 {
-    rt_hw_spi_device_attach(SPI_BUS_NAME, SPI_FLASH_DEVICE_NAME, SPI_FLASH_SS_PORT, SPI_FLASH_SS_PIN);
+    rt_hw_spi_device_attach(SPI_BUS_NAME, SPI_FLASH_DEVICE_NAME, SPI_FLASH_SS_PIN);
 
     if (RT_NULL == rt_sfud_flash_probe(SPI_FLASH_CHIP, SPI_FLASH_DEVICE_NAME))
     {