[bsp][essemi]es32vf2264更新部分库函数和驱动，添加RTduino支持 (#7619)

bsp/essemi/es32f0654/Kconfig

@@ -22,6 +22,7 @@ config SOC_ES32F0654LT
     bool
     select RT_USING_COMPONENTS_INIT
     select RT_USING_USER_MAIN
+    select ARCH_ARM_CORTEX_M0
     default y
 
 source "drivers/Kconfig"

bsp/essemi/es32f365x/Kconfig

@@ -22,6 +22,7 @@ config SOC_ES32F3696LT
     bool
     select RT_USING_COMPONENTS_INIT
     select RT_USING_USER_MAIN
+    select ARCH_ARM_CORTEX_M3
     default y
 
 source "drivers/Kconfig"

bsp/essemi/es32f369x/Kconfig

@@ -22,6 +22,7 @@ config SOC_ES32F3696LT
     bool
     select RT_USING_COMPONENTS_INIT
     select RT_USING_USER_MAIN
+    select ARCH_ARM_CORTEX_M3
     default y
 
 source "drivers/Kconfig"

bsp/essemi/es32vf2264/Kconfig

@@ -22,6 +22,7 @@ config SOC_ES32VF2264
     bool
     select RT_USING_COMPONENTS_INIT
     select RT_USING_USER_MAIN
+    select ARCH_RISCV32
     default y
 
 source "drivers/Kconfig"

bsp/essemi/es32vf2264/applications/SConscript

@@ -2,10 +2,18 @@ Import('RTT_ROOT')
 Import('rtconfig')
 from building import *
 
-cwd     = os.path.join(str(Dir('#')), 'applications')
-src	= Glob('*.c')
+src = Glob('*.c')
 
-CPPPATH = [cwd, str(Dir('#'))]
-group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
+if GetDepend(['PKG_USING_RTDUINO']) and not GetDepend(['RTDUINO_NO_SETUP_LOOP']):
+    src += ['arduino_main.cpp']
+
+cwd = GetCurrentDir()
+CPPPATH = [cwd]
+group = DefineGroup('applications', src, depend = [''], CPPPATH = CPPPATH)
+
+list = os.listdir(cwd)
+for item in list:
+    if os.path.isfile(os.path.join(cwd, item, 'SConscript')):
+        group = group + SConscript(os.path.join(item, 'SConscript'))
 
 Return('group')

bsp/essemi/es32vf2264/applications/arduino_main.cpp

@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2021-12-10     Meco Man     first version
+ * 2023-05-30     shiwa        ES32VF2264
+ */
+#include <Arduino.h>
+
+void setup(void)
+{
+    pinMode(LED_BUILTIN, OUTPUT);
+}
+
+void loop(void)
+{
+    /* put your main code here, to run repeatedly: */
+    digitalWrite(LED_BUILTIN, !digitalRead(LED_BUILTIN));
+    delay(250);
+}
+

bsp/essemi/es32vf2264/applications/arduino_pinout/README.md

@@ -0,0 +1,142 @@
+# ES32VF2264的Arduino生态兼容说明
+
+## 1 RTduino - RT-Thread的Arduino生态兼容层
+
+ES32VF2264已经适配了[RTduino软件包](https://github.com/RTduino/RTduino)，可正常使用全部功能，包含GPIO、PWM、I2C、SPI、UART功能。除标准arduino uno的接口外，该开发板还额外添加了4个led和一组方向键对应的GPIO，由于设计原因，该开发板仅有A0-A1两个ADC可用，原本对应A2-A5的ADC被换为了数字接口(可用作SPI1)。更多信息，请参见[RTduino软件包说明文档](https://github.com/RTduino/RTduino)
+
+### 1.1 使用CDK+Env
+
+1. Env 工具下敲入 menuconfig 命令，或者 RT-Thread Studio IDE 下选择 RT-Thread Settings：
+
+```Kconfig
+Hardware Drivers Config --->
+    Onboard Peripheral Drivers --->
+        [*] Compatible with Arduino Ecosystem (RTduino)
+```
+
+2. 进入RTduino配置，打开需要使用的各项配置 (SPI,I2C,Adafrui等)
+
+```Kconfig
+RT-Thread online packages --->
+    system packages --->
+        RTduino: Arduino Ecological Compatibility Layer
+```
+
+3. 使用 pkgs --update下载RTduino包及其他软件包
+4. 使用scons --target=cdk生成代码
+
+## 2 Arduino引脚排布
+
+该BSP遵照Arduino UNO板的引脚排列方式，并额外扩展了一些LED和按键，更多引脚布局相关信息参见 [pins_arduino.c](pins_arduino.c) 和 [pins_arduino.h](pins_arduino.h)。
+
+arduino引脚排布参见下图(或arduino_pins.xlsx)。
+
+注意，由于设计原因，左边部分原本对应Arduino的A2-A5这4个ADC接口不可用，可以作为普通数字IO或SPI1使用。
+
+![image-20230602165933931](picture/image-20230602165933931.png)
+
+各引脚功能参见下表
+
+| Arduino引脚编号 | ES32引脚编号 | 备注             |
+| --------------- | ------------ | ---------------- |
+| D0              | PC11         | CUART2 RX        |
+| D1              | PC10         | CUART2 TX        |
+| D2              | PB5          | 普通IO           |
+| D3              | PC15         | PWM3 通道4       |
+| D4              | PB4          | 普通IO           |
+| D5              | PC7          | PWM2 通道2       |
+| D6              | PC6          | PWM0 通道1       |
+| D7              | PA8          | 普通IO           |
+| D8              | PB11         | 普通IO           |
+| D9              | PB10         | 普通IO           |
+| D10             | PA4          | SPI片选/普通IO   |
+| D11             | PA7          | SPI0_MOSI/普通IO |
+| D12             | PA6          | SPI0_MISO/普通IO |
+| D13             | PA5          | SPI0_SCK/普通IO  |
+| D14             | PB3          | I2C0_SDA         |
+| D15             | PB2          | I2C0_SCL         |
+| D16             | PA15         | LED4             |
+| D17             | PC12         | LED5             |
+| D18             | PC13         | LED6             |
+| D19             | PC14         | LED7             |
+| D20             | PB7          | KEY_UP           |
+| D21             | PB9          | KEY_DOWN         |
+| D22             | PB6          | KEY_LEFT         |
+| D23             | PB8          | KEY_RIGHT        |
+| D24             | PD2          | KEY_CENTER       |
+| D25             | PB15         | SPI1_MOSI/普通IO |
+| D26             | PB14         | SPI1_MISO/普通IO |
+| D27             | PB13         | SPI1_SCK/普通IO  |
+| D28             | PB12         | SPI片选/普通IO   |
+| A0              | PC1          | ADC              |
+| A1              | PC2          | ADC              |
+
+
+
+## 3 I2C总线
+
+ES32-Arduino支持的I2C总线是：i2c0。
+
+I2C的引脚都是被RT-Thread I2C设备框架接管的，不需要直接操控这两个引脚。
+
+在RTduino中选择启用<Wire.h>即可使用。
+
+或者在RTduino中开启Adafruit_Bus后，可使用`Adafruit_I2CDevice.h`控制
+
+## 4 SPI总线
+
+ES32-Arduino的SPI总线是spi0、spi1， `SCK`、`MISO`、`MOSI`引脚是被RT-Thread SPI设备框架接管的，不需要直接操控这3个引脚。
+
+在RTduino中选择启用<SPI.h>即可使用，用户需要自行控制片选。
+
+或者在RTduino中开启Adafruit_Bus后，使用`Adafruit_SPIDevice.h`控制。
+
+## 5 测试说明
+
+在applications/arduino_pinout/examples/arduino_examples.cpp文件中，已经根据功能预设了一系列函数用于测试arduino各个功能,可根据测试需要，取消注释对应的宏定义即可启用对应的测试。如果需要测试，请将arduino_examples.cpp文件的内容覆盖到applications/arduino_main.cpp文件中
+
+1. RTduino各功能测试
+
+目前支持的测试如下：
+
+| 宏定义                 | 名称            | 描述                                                         |
+| ---------------------- | --------------- | ------------------------------------------------------------ |
+| ARDU_TEST_GPIO         | 数字GPIO测试    | 测试数字管脚的输出功能，包括两个管脚输出高/低电平，一个管脚输出一个0.5s周期的方波 |
+| ARDU_TEST_PWM          | 模拟PWM输出测试 | PWM功能输出测试，分别在三个PWM管脚输出不同的三种占空比的方波 |
+| ARDU_TEST_UART         | UART测试        | 在cuart2串口不断打印"Hello"                                  |
+| ARDU_TEST_ADAFRUIT_I2C | AdafruitI2C测试 | 使用AdafruitI2C库发送数据，测试正常可以收到不断发送的"HelloRTduinoHello" |
+| ARDU_TEST_ADAFRUIT_SPI | AdafruitSPI测试 | 使用AdafruitSPI库发送数据，测试正常可收到不断的"TEST"        |
+| ARDU_TEST_I2C          | I2C测试         | 通过I2C接口发送数据，测试正常可收到不断的"Hello"             |
+| ARDU_TEST_SPI          | SPI测试         | 通过SPI接口发送和接收数据，测试正常可收到不断的"ABCD"        |
+| ARDU_TEST_INT          | 中断测试        | 测试外部中断，按下方向键的中键会打印相关信息                 |
+| ARDU_TEST_DIGITAL_READ | 数字读测试      | 不断读取各个方向键的状态，并在按下时输出信息                 |
+| ARDU_TEST_ADC_READ     | ADC测试         | 循环读取各个ADC的数据，并通过串口打印                        |
+
+## 6 其他说明
+
+### 1.ADC
+目前ES32的ADC返回的是原始值(范围0-4095)，需要计算转换为实际的电压值，暂时不支持分辨率调节。
+### 2.对非数字IO的管脚不要调用pinMode
+非数字IO的管脚在其他地方已经初始化了，再次调用pinMode会使他变为普通管脚且无法再重新初始化为非数字IO的功能。即对于任意管脚可以调用pinMode使它变为数字IO管脚，但这一过程不可逆，原有的预设功能将会失效
+### 3.SPI/I2C/UART使用
+
+默认开启了spi0、spi1、i2c0、cuart1(默认控制台串口)、cuart2,如果需要使用其他的spi/i2c/uart可以在配置中启用，并在初始化时指定名称即可。如果想要调整管脚信息，可以使用ESCodeMaker辅助，但要注意打开对应的外设。
+
+SPI必须先调用begin才能使用其他函数
+
+### 4.C++异常和RTTI
+
+若使用c++异常，则该机制会占用大量内存(~18k),该内存会在C++部分初始化时使用malloc申请。在编译参数中加入-fno-exceptions禁用c++异常机制可去除该问题。
+
+若使用RTTI(运行时类型识别)，会需要额外的stdc++库支持，需要在CDK的Linker页面中，在Library Name中添加"stdc++"，可通过在编译参数中加入-fno-rtti禁用，但由于CDK不区分C和C++的编译参数，会导致编译C文件时产生警告"warning: command-line option '-fno-rtti' is valid for C++/D/ObjC++ but not for C"。
+
+本BSP默认**禁用异常**，**连接stdc++库**。
+
+### 5.已知问题
+
+1. 开启C++选项后，即使未选择使用C++ thread，也会引入thread支持，此支持需要使用event，若未开启则会编译报错。需要在"RT-Thread Kernel → Inter-Thread communication"中，开启"Enable Event Flag"
+2. rt_atomic.h文件循环包含导致编译报错，临时解决方案：在编译器的宏定义中添加"__RT_ATOMIC_H\_\_"，临时屏蔽该文件，之后的解决方案等待rt-thread更新
+
+## 7 参考资料
+
+- [工程师笔记 | 使用RT-Thread的Arduino兼容层开发ES32应用程序](https://mp.weixin.qq.com/s/O693pgCLl1xOGxE9O7zaHA)

bsp/essemi/es32vf2264/applications/arduino_pinout/SConscript

@@ -0,0 +1,9 @@
+from building import *
+
+cwd = GetCurrentDir()
+src = Glob('*.c') + Glob('*.cpp')
+inc = [cwd]
+
+group = DefineGroup('RTduino', src, depend = ['PKG_USING_RTDUINO'], CPPPATH = inc)
+
+Return('group')

bsp/essemi/es32vf2264/applications/arduino_pinout/examples/arduino_examples.cpp

@@ -0,0 +1,187 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2021-12-10     Meco Man     first version
+ * 2023-05-30     shiwa        ES32VF2264
+ */
+#include <Arduino.h>
+
+#define ARDU_TEST_GPIO
+#define ARDU_TEST_PWM
+#define ARDU_TEST_DIGITAL_READ
+#define ARDU_TEST_INT
+//#define ARDU_TEST_ADC_READ
+//#define ARDU_TEST_I2C
+//#define ARDU_TEST_SPI
+//#define  ARDU_TEST_ADAFRUIT_I2C
+//#define  ARDU_TEST_ADAFRUIT_SPI
+//#define ARDU_TEST_UART
+
+#ifdef ARDU_TEST_I2C
+#include <Wire.h>
+#endif
+#ifdef ARDU_TEST_SPI
+#include <SPI.h>
+#endif
+
+#if defined(ARDU_TEST_ADAFRUIT_I2C) || defined(ARDU_TEST_ADAFRUIT_SPI)
+#include <Adafruit_BusIO_Register.h>
+#endif
+#ifdef ARDU_TEST_ADAFRUIT_I2C
+#include <Adafruit_I2CDevice.h>
+Adafruit_I2CDevice i2c_dev(0x2D);
+Adafruit_BusIO_Register i2c_reg(&i2c_dev, 0x4241, 2, 0, 2);
+#endif
+#ifdef ARDU_TEST_ADAFRUIT_SPI
+#include "Adafruit_SPIDevice.h"
+Adafruit_SPIDevice spi_dev(D10, 100000);
+#endif
+
+static char buf[16] = {"test"};
+static char buf2[16] = {"AB"};
+
+void test_int()
+{
+    Serial.println("Interrupt Triggered");
+}
+void setup(void)
+{
+    /* No unused warnings */
+    (void)buf;
+    (void)buf2;
+
+    pinMode(LED_BUILTIN, OUTPUT);
+    Serial.begin();
+    Serial.println("Hello arduino");
+
+#ifdef ARDU_TEST_GPIO //数字管脚输出
+    pinMode(D2, OUTPUT);
+    pinMode(D4, OUTPUT);
+    digitalWrite(D4, 1);
+    pinMode(D7, OUTPUT);
+    digitalWrite(D7, 0);
+    pinMode(D18, OUTPUT); //LED6
+#endif
+
+#ifdef ARDU_TEST_INT  //中断输入
+    attachInterrupt(digitalPinToInterrupt(D24), test_int, FALLING);
+#endif
+
+#ifdef ARDU_TEST_DIGITAL_READ //数字管脚输入
+    pinMode(D20,INPUT);
+    pinMode(D21,INPUT);
+    pinMode(D22,INPUT);
+    pinMode(D23,INPUT);
+#endif
+
+#ifdef ARDU_TEST_PWM //测试PWM输出
+    analogWriteFrequency(10);
+    analogWrite(D3, 80);
+    analogWrite(D5, 127);
+    analogWrite(D6, 200);
+#endif
+
+#ifdef ARDU_TEST_I2C //I2C
+    Wire.begin();
+#endif
+
+#ifdef ARDU_TEST_SPI //SPI
+    SPI.begin();
+    /* MSB Second IdleLow */
+    SPI.beginTransaction(SPISettings(100000, MSBFIRST, SPI_MODE1));
+    pinMode(D10, OUTPUT);
+    digitalWrite(D10, HIGH);
+#endif
+
+#ifdef ARDU_TEST_ADAFRUIT_I2C  //ADAFRUIT I2C
+    i2c_dev.begin();
+#endif
+
+#ifdef ARDU_TEST_ADAFRUIT_SPI  //ADAFRUIT SPI
+    spi_dev.begin();
+#endif
+
+#ifdef ARDU_TEST_UART
+    Serial2.begin();
+#endif
+
+}
+
+void loop(void)
+{
+    /* put your main code here, to run repeatedly: */
+    digitalWrite(LED_BUILTIN, !digitalRead(LED_BUILTIN));
+    //delay(250);
+
+#ifdef ARDU_TEST_GPIO
+    digitalWrite(D2, 1);
+    digitalWrite(D18, 0);
+#endif
+    delay(250);
+#ifdef ARDU_TEST_GPIO
+    digitalWrite(D2, 0);
+    digitalWrite(D18, 1);
+#endif
+    delay(250);
+
+#ifdef ARDU_TEST_ADC_READ
+    int val1 = analogRead(A0);
+    int val2 = analogRead(A1);
+    rt_kprintf("A0=%d,A2=%d\r\n", val1, val2);
+#endif
+
+#ifdef ARDU_TEST_DIGITAL_READ
+    if (digitalRead(D20) == LOW) {
+        Serial.println("UP");
+    }
+    if (digitalRead(D21) == LOW) {
+        Serial.println("DOWN");
+    }
+    if (digitalRead(D22) == LOW) {
+        Serial.println("LEFT");
+    }
+    if (digitalRead(D23) == LOW) {
+        Serial.println("RIGHT");
+    }
+#endif
+
+
+#ifdef ARDU_TEST_I2C
+    strcpy(buf,"Hello");
+    Wire.beginTransmission(0x2D);
+    Wire.write((uint8_t *)buf, strlen(buf));
+    Wire.endTransmission();
+#endif
+
+#ifdef ARDU_TEST_SPI
+    strcpy(buf,"ABCD");
+    digitalWrite(D10, LOW);
+    SPI.transfer((uint8_t *)buf, strlen(buf));
+    digitalWrite(D10, HIGH);
+    buf[4] = 0;
+    Serial.print(buf);
+#endif
+
+#ifdef ARDU_TEST_ADAFRUIT_I2C
+    strcpy(buf2,"Hello");
+    strcpy(buf,"RTduino");
+    i2c_dev.write((uint8_t *)buf, strlen(buf), true, (uint8_t *)buf2, strlen(buf2));
+    i2c_reg.write((uint8_t *)buf2, 5);
+#endif
+
+#ifdef ARDU_TEST_ADAFRUIT_SPI
+    strcpy(buf,"TEST");
+    spi_dev.beginTransactionWithAssertingCS();
+    spi_dev.transfer((uint8_t *)buf, strlen(buf));
+    spi_dev.endTransactionWithDeassertingCS();
+#endif
+
+#ifdef ARDU_TEST_UART
+    Serial2.println("Hello");
+#endif
+}
+

bsp/essemi/es32vf2264/applications/arduino_pinout/pins_arduino.c

@@ -0,0 +1,61 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2023-06-05     shiwa        ES32VF2264
+ */
+#include <Arduino.h>
+#include <board.h>
+#include "drv_gpio.h"
+#include "pins_arduino.h"
+
+/*
+    {Arduino Pin, RT-Thread Pin [, Device Name, Channel]}
+    [] means optional
+    Digital pins must NOT give the device name and channel.
+    Analog pins MUST give the device name and channel(ADC, PWM or DAC).
+    Arduino Pin must keep in sequence.
+*/
+const pin_map_t pin_map_table[]=
+{
+    {D0, GET_PIN(C,11), "cuart2"}, /* UART2-RX */
+    {D1, GET_PIN(C,10), "cuart2"}, /* UART2-TX */
+    {D2, GET_PIN(B,5)}, /* GPIO0 */
+    {D3, GET_PIN(C,15),"pwm3",4}, /* PWM2 GP16C4T2 CH4 */
+    {D4, GET_PIN(B,4)}, /* GPIO1 */
+    {D5, GET_PIN(C,7),"pwm2",2}, /* PWM2 GP16C4T1 CH2 */
+    {D6, GET_PIN(C,6),"pwm0",1}, /* PWM2 AD16C4T0 CH1 */
+    {D7, GET_PIN(A,8)}, /* GPIO2 */
+
+    {D8, GET_PIN(B,11)}, /* GPIO3 */
+    {D9, GET_PIN(B,10)}, /* GPIO4 */
+    {D10, GET_PIN(A,4)}, /* GPIO5, SS */
+    {D11, GET_PIN(A,7), "spi0"}, /* SPI0-MOSI */
+    {D12, GET_PIN(A,6), "spi0"}, /* SPI0-MISO */
+    {D13, GET_PIN(A,5), "spi0"}, /* SPI0-SCK */
+
+    {D14, GET_PIN(B,3), "i2c0"}, /* I2C0-SDA */
+    {D15, GET_PIN(B,2), "i2c0"}, /* I2C0-SCL */
+
+    {D16, GET_PIN(A,15)}, /* LED3 */
+    {D17, GET_PIN(C,12)}, /* LED4 */
+    {D18, GET_PIN(C,13)}, /* LED5 */
+    {D19, GET_PIN(C,14)}, /* LED6 */
+
+    {D20, GET_PIN(B,7)}, /* KEY_UP */
+    {D21, GET_PIN(B,9)}, /* KEY_DOWN */
+    {D22, GET_PIN(B,6)}, /* KEY_LEFT */
+    {D23, GET_PIN(B,8)}, /* KEY_RIGHT */
+    {D24, GET_PIN(D,2)}, /* KEY_CENTER */
+    {D25, GET_PIN(B,15)},        /* GPIO/SPI1_MOSI */
+    {D26, GET_PIN(B,14)},         /* GPIO/SPI1_MISO */
+    {D27, GET_PIN(B,13)},        /* GPIO/SPI1_SCK */
+    {D28, GET_PIN(B,12)},        /* GPIO/SPI1_NSS */
+
+
+    {A0, GET_PIN(C,1),"adc0",1}, /* ADC0 */
+    {A1, GET_PIN(C,2),"adc0",2}, /* ADC0 */
+};

bsp/essemi/es32vf2264/applications/arduino_pinout/pins_arduino.h

@@ -0,0 +1,60 @@
+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2022-07-07     shiwa        Adapt ES32F369x
+ */
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+/* pins alias. Must keep in sequence */
+#define D0   (0)
+#define D1   (1)
+#define D2   (2)
+#define D3   (3)
+#define D4   (4)
+#define D5   (5)
+#define D6   (6)
+#define D7   (7)
+
+#define D8   (8)
+#define D9   (9)
+#define D10  (10)
+#define D11  (11)
+#define D12  (12)
+#define D13  (13)
+#define D14  (14)
+#define D15  (15)
+#define D16  (16)
+#define D17  (17)
+#define D18  (18)
+#define D19  (19)
+#define D20  (20)
+#define D21  (21)
+#define D22  (22)
+#define D23  (23)
+#define D24  (24)
+#define D25  (25)
+#define D26  (26)
+#define D27  (27)
+#define D28  (28)
+
+#define A0   (25)
+#define A1   (26)
+
+#define F_CPU  72000000L /* CPU: 72MHz */
+
+#define RTDUINO_DEFAULT_IIC_BUS_NAME            "i2c0"
+
+#define SS D10
+#define RTDUINO_DEFAULT_SPI_BUS_NAME            "spi0"
+
+#define RTDUINO_SERIAL2_DEVICE_NAME             "cuart2"
+
+#define LED_BUILTIN D16
+
+#endif /* Pins_Arduino_h */

bsp/essemi/es32vf2264/drivers/ES/es_conf_info_map.h

@@ -573,6 +573,26 @@ static const struct pin_index pins[] =
 #endif
 
 
+
+#ifndef ES_MAP__PIN_PC11_USED
+#define ES_MAP__PIN_PC11_USED
+#ifndef ES_CUART2_RX_GPIO_FUNC
+#define ES_CUART2_RX_GPIO_FUNC  ALD_GPIO_FUNC_4
+#endif
+#ifndef ES_CUART2_RX_GPIO_PORT
+#define ES_CUART2_RX_GPIO_PORT  GPIOC
+#endif
+#ifndef ES_CUART2_RX_GPIO_PIN
+#define ES_CUART2_RX_GPIO_PIN  ALD_GPIO_PIN_11
+#endif
+
+#ifndef ES_CUART2_RX_PIN
+#ifdef ES_PIN_GPIO_C_11
+#define ES_CUART2_RX_PIN ES_PIN_GPIO_C_11
+#endif
+#endif
+#endif
+
 #ifndef ES_MAP__PIN_PD0_USED
 #define ES_MAP__PIN_PD0_USED
 #ifndef ES_CUART2_RX_GPIO_FUNC
@@ -633,6 +653,26 @@ static const struct pin_index pins[] =
 #endif
 
 
+
+#ifndef ES_MAP__PIN_PC10_USED
+#define ES_MAP__PIN_PC10_USED
+#ifndef ES_CUART2_TX_GPIO_FUNC
+#define ES_CUART2_TX_GPIO_FUNC  ALD_GPIO_FUNC_4
+#endif
+#ifndef ES_CUART2_TX_GPIO_PORT
+#define ES_CUART2_TX_GPIO_PORT  GPIOC
+#endif
+#ifndef ES_CUART2_TX_GPIO_PIN
+#define ES_CUART2_TX_GPIO_PIN  ALD_GPIO_PIN_10
+#endif
+
+#ifndef ES_CUART2_TX_PIN
+#ifdef ES_PIN_GPIO_C_10
+#define ES_CUART2_TX_PIN ES_PIN_GPIO_C_10
+#endif
+#endif
+#endif
+
 #ifndef ES_MAP__PIN_PD1_USED
 #define ES_MAP__PIN_PD1_USED
 #ifndef ES_CUART2_TX_GPIO_FUNC
@@ -2993,26 +3033,6 @@ static const struct pin_index pins[] =
 #endif
 
 
-#ifndef ES_MAP__PIN_PC10_USED
-#define ES_MAP__PIN_PC10_USED
-#ifndef ES_CUART2_TX_GPIO_FUNC
-#define ES_CUART2_TX_GPIO_FUNC  ALD_GPIO_FUNC_4
-#endif
-#ifndef ES_CUART2_TX_GPIO_PORT
-#define ES_CUART2_TX_GPIO_PORT  GPIOC
-#endif
-#ifndef ES_CUART2_TX_GPIO_PIN
-#define ES_CUART2_TX_GPIO_PIN  ALD_GPIO_PIN_10
-#endif
-
-#ifndef ES_CUART2_TX_PIN
-#ifdef ES_PIN_GPIO_C_10
-#define ES_CUART2_TX_PIN ES_PIN_GPIO_C_10
-#endif
-#endif
-#endif
-
-
 #ifndef ES_MAP__PIN_PC10_USED
 #define ES_MAP__PIN_PC10_USED
 #ifndef ES_EUART1_TX_GPIO_FUNC
@@ -3073,26 +3093,6 @@ static const struct pin_index pins[] =
 #endif
 
 
-#ifndef ES_MAP__PIN_PC11_USED
-#define ES_MAP__PIN_PC11_USED
-#ifndef ES_CUART2_RX_GPIO_FUNC
-#define ES_CUART2_RX_GPIO_FUNC  ALD_GPIO_FUNC_4
-#endif
-#ifndef ES_CUART2_RX_GPIO_PORT
-#define ES_CUART2_RX_GPIO_PORT  GPIOC
-#endif
-#ifndef ES_CUART2_RX_GPIO_PIN
-#define ES_CUART2_RX_GPIO_PIN  ALD_GPIO_PIN_11
-#endif
-
-#ifndef ES_CUART2_RX_PIN
-#ifdef ES_PIN_GPIO_C_11
-#define ES_CUART2_RX_PIN ES_PIN_GPIO_C_11
-#endif
-#endif
-#endif
-
-
 #ifndef ES_MAP__PIN_PC11_USED
 #define ES_MAP__PIN_PC11_USED
 #ifndef ES_I2C1_SCL_GPIO_FUNC

bsp/essemi/es32vf2264/drivers/ES/es_conf_info_pwm.h

@@ -61,11 +61,11 @@
 #ifndef  ES_DEVICE_NAME_GP16C4T0_PWM
 #define  ES_DEVICE_NAME_GP16C4T0_PWM     "pwm1"
 #endif
-#ifndef  ES_DEVICE_NAME_GP16C2T0_PWM
-#define  ES_DEVICE_NAME_GP16C2T0_PWM     "pwm2"
+#ifndef  ES_DEVICE_NAME_GP16C4T1_PWM
+#define  ES_DEVICE_NAME_GP16C4T1_PWM     "pwm2"
 #endif
-#ifndef  ES_DEVICE_NAME_GP16C2T1_PWM
-#define  ES_DEVICE_NAME_GP16C2T1_PWM     "pwm3"
+#ifndef  ES_DEVICE_NAME_GP16C4T2_PWM
+#define  ES_DEVICE_NAME_GP16C4T2_PWM     "pwm3"
 #endif
 
 

bsp/essemi/es32vf2264/drivers/Kconfig

@@ -8,6 +8,23 @@ menu "Hardware Drivers Config"
 
     source "drivers/ES/Kconfig"    
 
+        config BSP_USING_ARDUINO
+            bool "Compatible with Arduino Ecosystem (RTduino)"
+            select PKG_USING_RTDUINO
+            select BSP_USING_GPIO
+            select BSP_USING_CUART1
+            select BSP_USING_CUART2
+            select BSP_USING_SPI0
+            select BSP_USING_SPI1
+            select BSP_USING_I2C0
+            select BSP_USING_ADC0
+            select BSP_USING_AD16C4T0_PWM
+            select BSP_USING_GP16C4T1_PWM
+            select BSP_USING_GP16C4T2_PWM
+            imply RTDUINO_USING_SERVO
+            imply RTDUINO_USING_WIRE
+            imply RTDUINO_USING_SPI
+            default n
     endmenu
 
     menu "Onboard Peripheral Drivers"

bsp/essemi/es32vf2264/drivers/SConscript

@@ -72,8 +72,11 @@ CPPPATH = CPPPATH + [cwd + '/ES']
 #__SYS_SELECT_H__ 用来规避冲突
 #cdkrepo\toolchain\xtgccelfnewlib\v2.6.1\r\riscv64-unknown-elf\include\sys\select.h
 #components/libc/compilers/common/include/sys/select.h
-CPPDEFINES = ['__SYS_SELECT_H__']
-group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES = CPPDEFINES)
+CPPDEFINES = ['__SYS_SELECT_H__','__RT_ATOMIC_H__']
+CCFLAGS='-fno-exceptions'
+#LINKFLAGS='-lstdc++'
+LIBS=['stdc++']
+group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES = CPPDEFINES,CCFLAGS=CCFLAGS,LIBS=LIBS)
 objs = objs + group
 
 Return('objs')

bsp/essemi/es32vf2264/drivers/drv_pwm.c

@@ -173,9 +173,9 @@ int rt_hw_pwm_init(void)
 
 #ifdef BSP_USING_AD16C4T0_PWM /* 4 channels */
     static struct rt_device_pwm ad16c4t0_pwm_dev;
-    static timer_handle_t ad16c4t0_timer_initstruct;
+    static ald_timer_handle_t ad16c4t0_timer_initstruct;
 
-    ad16c4t0_timer_initstruct.perh = AD16C4T0;
+    ad16c4t0_timer_initstruct.perh = AD16C4T;
     ald_timer_pwm_init(&ad16c4t0_timer_initstruct);
 
     /* gpio initialization */
@@ -204,108 +204,6 @@ int rt_hw_pwm_init(void)
                                  &ad16c4t0_timer_initstruct);
 #endif
 
-#ifdef BSP_USING_AD16C4T1_PWM /* 4 channels */
-    static struct rt_device_pwm ad16c4t1_pwm_dev;
-    static timer_handle_t ad16c4t1_timer_initstruct;
-
-    ad16c4t1_timer_initstruct.perh = AD16C4T1;
-    ald_timer_pwm_init(&ad16c4t1_timer_initstruct);
-
-    /* gpio initialization */
-
-#if  defined(ES_AD16C4T1_CH1_GPIO_FUNC)&&defined(ES_AD16C4T1_CH1_GPIO_PORT)&&defined(ES_AD16C4T1_CH1_GPIO_PIN)
-    gpio_initstructure.func = ES_AD16C4T1_CH1_GPIO_FUNC;
-    ald_gpio_init(ES_AD16C4T1_CH1_GPIO_PORT, ES_AD16C4T1_CH1_GPIO_PIN, &gpio_initstructure);
-#endif
-
-#if  defined(ES_AD16C4T1_CH2_GPIO_FUNC)&&defined(ES_AD16C4T1_CH2_GPIO_PORT)&&defined(ES_AD16C4T1_CH2_GPIO_PIN)
-    gpio_initstructure.func = ES_AD16C4T1_CH2_GPIO_FUNC;
-    ald_gpio_init(ES_AD16C4T1_CH2_GPIO_PORT, ES_AD16C4T1_CH2_GPIO_PIN, &gpio_initstructure);
-#endif
-
-#if  defined(ES_AD16C4T1_CH3_GPIO_FUNC)&&defined(ES_AD16C4T1_CH3_GPIO_PORT)&&defined(ES_AD16C4T1_CH3_GPIO_PIN)
-    gpio_initstructure.func = ES_AD16C4T1_CH3_GPIO_FUNC;
-    ald_gpio_init(ES_AD16C4T1_CH3_GPIO_PORT, ES_AD16C4T1_CH3_GPIO_PIN, &gpio_initstructure);
-#endif
-
-#if  defined(ES_AD16C4T1_CH4_GPIO_FUNC)&&defined(ES_AD16C4T1_CH4_GPIO_PORT)&&defined(ES_AD16C4T1_CH4_GPIO_PIN)
-    gpio_initstructure.func = ES_AD16C4T1_CH4_GPIO_FUNC;
-    ald_gpio_init(ES_AD16C4T1_CH4_GPIO_PORT, ES_AD16C4T1_CH4_GPIO_PIN, &gpio_initstructure);
-#endif
-
-    ret = rt_device_pwm_register(&ad16c4t1_pwm_dev, ES_DEVICE_NAME_AD16C4T1_PWM, &es32f3_pwm_ops,
-                                 &ad16c4t1_timer_initstruct);
-#endif
-
-
-#ifdef BSP_USING_GP32C4T0_PWM /* 4 channels */
-    static struct rt_device_pwm gp32c4t0_pwm_dev;
-    static timer_handle_t gp32c4t0_timer_initstruct;
-
-    gp32c4t0_timer_initstruct.perh = GP32C4T0;
-    ald_timer_pwm_init(&gp32c4t0_timer_initstruct);
-
-    /* gpio initialization */
-
-#if  defined(ES_GP32C4T0_CH1_GPIO_FUNC)&&defined(ES_GP32C4T0_CH1_GPIO_PORT)&&defined(ES_GP32C4T0_CH1_GPIO_PIN)
-    gpio_initstructure.func = ES_GP32C4T0_CH1_GPIO_FUNC;
-    ald_gpio_init(ES_GP32C4T0_CH1_GPIO_PORT, ES_GP32C4T0_CH1_GPIO_PIN, &gpio_initstructure);
-#endif
-
-#if  defined(ES_GP32C4T0_CH2_GPIO_FUNC)&&defined(ES_GP32C4T0_CH2_GPIO_PORT)&&defined(ES_GP32C4T0_CH2_GPIO_PIN)
-    gpio_initstructure.func = ES_GP32C4T0_CH2_GPIO_FUNC;
-    ald_gpio_init(ES_GP32C4T0_CH2_GPIO_PORT, ES_GP32C4T0_CH2_GPIO_PIN, &gpio_initstructure);
-#endif
-
-#if  defined(ES_GP32C4T0_CH3_GPIO_FUNC)&&defined(ES_GP32C4T0_CH3_GPIO_PORT)&&defined(ES_GP32C4T0_CH3_GPIO_PIN)
-    gpio_initstructure.func = ES_GP32C4T0_CH3_GPIO_FUNC;
-    ald_gpio_init(ES_GP32C4T0_CH3_GPIO_PORT, ES_GP32C4T0_CH3_GPIO_PIN, &gpio_initstructure);
-#endif
-
-#if  defined(ES_GP32C4T0_CH4_GPIO_FUNC)&&defined(ES_GP32C4T0_CH4_GPIO_PORT)&&defined(ES_GP32C4T0_CH4_GPIO_PIN)
-    gpio_initstructure.func = ES_GP32C4T0_CH4_GPIO_FUNC;
-    ald_gpio_init(ES_GP32C4T0_CH4_GPIO_PORT, ES_GP32C4T0_CH4_GPIO_PIN, &gpio_initstructure);
-#endif
-
-    ret = rt_device_pwm_register(&gp32c4t0_pwm_dev, ES_DEVICE_NAME_GP32C4T0_PWM, &es32f3_pwm_ops,
-                                 &gp32c4t0_timer_initstruct);
-#endif
-
-
-#ifdef BSP_USING_GP32C4T1_PWM /* 4 channels */
-    static struct rt_device_pwm gp32c4t1_pwm_dev;
-    static timer_handle_t gp32c4t1_timer_initstruct;
-
-    gp32c4t1_timer_initstruct.perh = GP32C4T1;
-    ald_timer_pwm_init(&gp32c4t1_timer_initstruct);
-
-    /* gpio initialization */
-
-#if  defined(ES_GP32C4T1_CH1_GPIO_FUNC)&&defined(ES_GP32C4T1_CH1_GPIO_PORT)&&defined(ES_GP32C4T1_CH1_GPIO_PIN)
-    gpio_initstructure.func = ES_GP32C4T1_CH1_GPIO_FUNC;
-    ald_gpio_init(ES_GP32C4T1_CH1_GPIO_PORT, ES_GP32C4T1_CH1_GPIO_PIN, &gpio_initstructure);
-#endif
-
-#if  defined(ES_GP32C4T1_CH2_GPIO_FUNC)&&defined(ES_GP32C4T1_CH2_GPIO_PORT)&&defined(ES_GP32C4T1_CH2_GPIO_PIN)
-    gpio_initstructure.func = ES_GP32C4T1_CH2_GPIO_FUNC;
-    ald_gpio_init(ES_GP32C4T1_CH2_GPIO_PORT, ES_GP32C4T1_CH2_GPIO_PIN, &gpio_initstructure);
-#endif
-
-#if  defined(ES_GP32C4T1_CH3_GPIO_FUNC)&&defined(ES_GP32C4T1_CH3_GPIO_PORT)&&defined(ES_GP32C4T1_CH3_GPIO_PIN)
-    gpio_initstructure.func = ES_GP32C4T1_CH3_GPIO_FUNC;
-    ald_gpio_init(ES_GP32C4T1_CH3_GPIO_PORT, ES_GP32C4T1_CH3_GPIO_PIN, &gpio_initstructure);
-#endif
-
-#if  defined(ES_GP32C4T1_CH4_GPIO_FUNC)&&defined(ES_GP32C4T1_CH4_GPIO_PORT)&&defined(ES_GP32C4T1_CH4_GPIO_PIN)
-    gpio_initstructure.func = ES_GP32C4T1_CH4_GPIO_FUNC;
-    ald_gpio_init(ES_GP32C4T1_CH4_GPIO_PORT, ES_GP32C4T1_CH4_GPIO_PIN, &gpio_initstructure);
-#endif
-
-    ret = rt_device_pwm_register(&gp32c4t1_pwm_dev, ES_DEVICE_NAME_GP32C4T1_PWM, &es32f3_pwm_ops,
-                                 &gp32c4t1_timer_initstruct);
-#endif
-
-
 #ifdef BSP_USING_GP16C4T0_PWM /* 4 channels */
     static struct rt_device_pwm gp16c4t0_pwm_dev;
     static ald_timer_handle_t gp16c4t0_timer_initstruct;
@@ -339,10 +237,9 @@ int rt_hw_pwm_init(void)
                                  &gp16c4t0_timer_initstruct);
 #endif
 
-
 #ifdef BSP_USING_GP16C4T1_PWM /* 4 channels */
     static struct rt_device_pwm gp16c4t1_pwm_dev;
-    static timer_handle_t gp16c4t1_timer_initstruct;
+    static ald_timer_handle_t gp16c4t1_timer_initstruct;
 
     gp16c4t1_timer_initstruct.perh = GP16C4T1;
     ald_timer_pwm_init(&gp16c4t1_timer_initstruct);
@@ -373,6 +270,39 @@ int rt_hw_pwm_init(void)
                                  &gp16c4t1_timer_initstruct);
 #endif
 
+#ifdef BSP_USING_GP16C4T2_PWM /* 4 channels */
+    static struct rt_device_pwm gp16c4t2_pwm_dev;
+    static ald_timer_handle_t gp16c4t2_timer_initstruct;
+
+    gp16c4t2_timer_initstruct.perh = GP16C4T2;
+    ald_timer_pwm_init(&gp16c4t2_timer_initstruct);
+
+    /* gpio initialization */
+
+#if  defined(ES_GP16C4T2_CH1_GPIO_FUNC)&&defined(ES_GP16C4T2_CH1_GPIO_PORT)&&defined(ES_GP16C4T2_CH1_GPIO_PIN)
+    gpio_initstructure.func = ES_GP16C4T2_CH1_GPIO_FUNC;
+    ald_gpio_init(ES_GP16C4T2_CH1_GPIO_PORT, ES_GP16C4T2_CH1_GPIO_PIN, &gpio_initstructure);
+#endif
+
+#if  defined(ES_GP16C4T2_CH2_GPIO_FUNC)&&defined(ES_GP16C4T2_CH2_GPIO_PORT)&&defined(ES_GP16C4T2_CH2_GPIO_PIN)
+    gpio_initstructure.func = ES_GP16C4T2_CH2_GPIO_FUNC;
+    ald_gpio_init(ES_GP16C4T2_CH2_GPIO_PORT, ES_GP16C4T2_CH2_GPIO_PIN, &gpio_initstructure);
+#endif
+
+#if  defined(ES_GP16C4T2_CH3_GPIO_FUNC)&&defined(ES_GP16C4T2_CH3_GPIO_PORT)&&defined(ES_GP16C4T2_CH3_GPIO_PIN)
+    gpio_initstructure.func = ES_GP16C4T2_CH3_GPIO_FUNC;
+    ald_gpio_init(ES_GP16C4T2_CH3_GPIO_PORT, ES_GP16C4T2_CH3_GPIO_PIN, &gpio_initstructure);
+#endif
+
+#if  defined(ES_GP16C4T2_CH4_GPIO_FUNC)&&defined(ES_GP16C4T2_CH4_GPIO_PORT)&&defined(ES_GP16C4T2_CH4_GPIO_PIN)
+    gpio_initstructure.func = ES_GP16C4T2_CH4_GPIO_FUNC;
+    ald_gpio_init(ES_GP16C4T2_CH4_GPIO_PORT, ES_GP16C4T2_CH4_GPIO_PIN, &gpio_initstructure);
+#endif
+
+    ret = rt_device_pwm_register(&gp16c4t2_pwm_dev, ES_DEVICE_NAME_GP16C4T2_PWM, &es32f3_pwm_ops,
+                                 &gp16c4t2_timer_initstruct);
+#endif
+
     return ret;
 }
 INIT_DEVICE_EXPORT(rt_hw_pwm_init);

bsp/essemi/es32vf2264/drivers/drv_spi.c

@@ -249,12 +249,12 @@ rt_err_t es32f3_spi_device_attach(rt_uint32_t pin, const char *bus_name, const c
 
 #ifdef BSP_USING_SPI1
     static struct rt_spi_bus _spi_bus1;
-    static spi_handle_t _spi1;
+    static ald_spi_handle_t _spi1;
 #endif
 
 #ifdef BSP_USING_SPI2
     static struct rt_spi_bus _spi_bus2;
-    static spi_handle_t _spi2;
+    static ald_spi_handle_t _spi2;
 #endif
 
 int rt_hw_spi_init(void)
@@ -328,7 +328,7 @@ int rt_hw_spi_init(void)
     spi = &_spi1;
 
     /* SPI1 gpio init */
-    gpio_instruct.mode = GPIO_MODE_OUTPUT;
+    gpio_instruct.mode = ALD_GPIO_MODE_OUTPUT;
 
 #if  defined(ES_SPI1_SCK_GPIO_FUNC)&&defined(ES_SPI1_SCK_GPIO_PORT)&&defined(ES_SPI1_SCK_GPIO_PIN)
     gpio_instruct.func = ES_SPI1_SCK_GPIO_FUNC;
@@ -341,7 +341,7 @@ int rt_hw_spi_init(void)
 #endif
 
 #if !defined(ES_SPI1_I2S_MODE)
-    gpio_instruct.mode = GPIO_MODE_INPUT;
+    gpio_instruct.mode = ALD_GPIO_MODE_INPUT;
 #endif
 
 #if  defined(ES_SPI1_MISO_GPIO_FUNC)&&defined(ES_SPI1_MISO_GPIO_PORT)&&defined(ES_SPI1_MISO_GPIO_PIN)
@@ -379,7 +379,7 @@ int rt_hw_spi_init(void)
     spi = &_spi2;
 
     /* SPI2 gpio init */
-    gpio_instruct.mode = GPIO_MODE_OUTPUT;
+    gpio_instruct.mode = ALD_GPIO_MODE_OUTPUT;
 
 #if  defined(ES_SPI2_SCK_GPIO_FUNC)&&defined(ES_SPI2_SCK_GPIO_PORT)&&defined(ES_SPI2_SCK_GPIO_PIN)
     gpio_instruct.func = ES_SPI2_SCK_GPIO_FUNC;

bsp/essemi/es32vf2264/drivers/es32vf2264.ld

@@ -44,6 +44,13 @@ SECTIONS
   *(.jcr)
   KEEP (*(.init))
   KEEP (*(.fini))
+  
+  . = ALIGN (4) ;
+  PROVIDE(__ctors_start__ = .);
+  KEEP (*(SORT(.init_array.*)))
+  KEEP (*(.init_array))
+  PROVIDE(__ctors_end__ = .);
+  
   . = ALIGN(0x40) ;
   KEEP(*startup_es32vf2264.o(*.vectors*))
 
@@ -105,14 +112,6 @@ SECTIONS
   *(.rodata.str1.4)
   *(.srodata*)
   . = ALIGN(0x4) ;
-  __ctor_start__ = .;
-  KEEP (*(SORT(.ctors.*)))
-  KEEP (*(.ctors))
-  __ctor_end__ = .;
-  KEEP (*(SORT(.dtors.*)))
-  KEEP (*(.dtors))
-  __dtor_end__ = .;
-  . = ALIGN(0x4) ;
   __erodata = .;
   __rodata_end__ = .;
  } > REGION_RODATA
@@ -141,6 +140,10 @@ SECTIONS
   __start_cmd = .;
   *(.bootloaddata.cmd)
   . = ALIGN(4) ;
+  PROVIDE(__dtors_start__ = .);
+  KEEP(*(SORT(.dtors.*)))
+  KEEP(*(.dtors))
+  PROVIDE(__dtors_end__ = .);
   __stop_cmd = .;
   __global_pointer$ = .;
   *(.sdata)

bsp/essemi/es32vf2264/libraries/ALD/ES32VF2264/Include/ald_adc.h

@@ -571,7 +571,7 @@ uint32_t ald_adc_get_error(ald_adc_handle_t *hperh);
   * @}
   */
 #ifdef __cplusplus
- extern "C" }
+}
 #endif /* __cplusplus */
 
 #endif /* __ALD_ADC_H */

bsp/essemi/es32vf2264/libraries/RV_CORE/Device/EastSoft/ES32VF2264/Include/es32vf2264.h

@@ -31,8 +31,11 @@
 
 #ifndef __ES32VF2264_H__
 #define __ES32VF2264_H__
-
+#ifdef __cplusplus
+#define __I  volatile       /* defines 'read only' permissions */
+#else
 #define __I  volatile const /* defines 'read only' permissions */
+#endif
 #define __O  volatile       /* defines 'write only' permissions */
 #define __IO volatile       /* defines 'read / write' permissions */
 

bsp/essemi/es32vf2264/template.cdkproj

@@ -140,8 +140,8 @@ BareMetal: Without RTOS
         <InhibitWarn>no</InhibitWarn>
         <AllWarn>yes</AllWarn>
         <WarnErr>no</WarnErr>
-        <OneElfS>no</OneElfS>
-        <OneElfSPerData>no</OneElfSPerData>
+        <OneElfS>yes</OneElfS>
+        <OneElfSPerData>yes</OneElfSPerData>
         <Fstrict>no</Fstrict>
       </Compiler>
       <Asm>