[bsp/nuvoton] Update. (#6022)

1. Sync 4.1.1+.
2. Add SDIO drivers for M480/M2354 platforms.
3. Update LVGL porting.
4. Add N9H30 FMI NAND driver.

Co-authored-by: Wayne Lin <wclin@nuvoton.com>

bsp/nuvoton/libraries/m2354/Device/Nuvoton/M2354/Include/M2354.h

@@ -1089,6 +1089,7 @@ extern void SystemInit(void);
 #include "nu_scu.h"
 #include "nu_tamper.h"
 #include "nu_rng.h"
+#include "nu_trng.h"
 #include "nu_dpm.h"
 #include "nu_fvc.h"
 #include "nu_ewwdt.h"

bsp/nuvoton/libraries/m2354/StdDriver/inc/nu_sdh.h

@@ -185,7 +185,7 @@ void SDH_Open(SDH_T *sdh, uint32_t u32CardDetSrc);
 uint32_t SDH_Probe(SDH_T *sdh);
 uint32_t SDH_Read(SDH_T *sdh, uint8_t *pu8BufAddr, uint32_t u32StartSec, uint32_t u32SecCount);
 uint32_t SDH_Write(SDH_T *sdh, uint8_t *pu8BufAddr, uint32_t u32StartSec, uint32_t u32SecCount);
-
+void SDH_Set_clock(SDH_T *sdh, uint32_t u32SDClockKhz);
 uint32_t SDH_CardDetection(SDH_T *sdh);
 void SDH_Open_Disk(SDH_T *sdh, uint32_t u32CardDetSrc);
 void SDH_Close_Disk(SDH_T *sdh);

bsp/nuvoton/libraries/m2354/StdDriver/lib/libStdDriver.ewp

@@ -2181,6 +2181,9 @@
         <file>
             <name>$PROJ_DIR$\..\src\nu_timer_pwm.c</name>
         </file>
+        <file>
+            <name>$PROJ_DIR$\..\src\nu_trng.c</name>
+        </file>
         <file>
             <name>$PROJ_DIR$\..\src\nu_uart.c</name>
         </file>

bsp/nuvoton/libraries/m2354/StdDriver/lib/libStdDriver.uvprojx

@@ -16,8 +16,8 @@
         <TargetCommonOption>
           <Device>M2354ES</Device>
           <Vendor>Nuvoton</Vendor>
-          <PackID>Nuvoton.NuMicro_DFP.1.3.10</PackID>
-          <PackURL>http://www.nuvoton.com/hq/enu/Documents/KEILSoftwarePack</PackURL>
+          <PackID>Nuvoton.NuMicro_DFP.1.3.13</PackID>
+          <PackURL>https://github.com/OpenNuvoton/cmsis-packs/raw/master/</PackURL>
           <Cpu>IRAM(0x20000000,0x8000) IRAM2(0x30008000,0x10000) IROM(0x00000000,0x40000) IROM2(0x10040000,0x40000) CPUTYPE("Cortex-M23") TZ CLOCK(12000000) ESEL ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -587,6 +587,11 @@
               <FileType>1</FileType>
               <FilePath>..\src\nu_wwdt.c</FilePath>
             </File>
+            <File>
+              <FileName>nu_trng.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\src\nu_trng.c</FilePath>
+            </File>
           </Files>
         </Group>
       </Groups>

bsp/nuvoton/libraries/m2354/StdDriver/src/nu_sdh.c

@@ -12,7 +12,7 @@
 #include "NuMicro.h"
 
 #if defined (__ICCARM__)
-# pragma diag_suppress=Pm073, Pm143        /* Misra C 2004 rule 14.7 */
+    #pragma diag_suppress=Pm073, Pm143        /* Misra C 2004 rule 14.7 */
 #endif
 
 
@@ -46,10 +46,10 @@ static uint32_t _SDH_uR7_CMD = 0UL;
 static uint32_t _SDH_ReferenceClock;
 
 #if defined ( __ICCARM__ ) /*!< IAR Compiler */
-#pragma data_alignment = 4
-static uint8_t _SDH_ucSDHCBuffer[512];
+    #pragma data_alignment = 4
+    static uint8_t _SDH_ucSDHCBuffer[512];
 #else
-static __attribute__((aligned)) uint8_t _SDH_ucSDHCBuffer[512];
+    static __attribute__((aligned)) uint8_t _SDH_ucSDHCBuffer[512];
 #endif
 
 /* Declare these functions here to avoid MISRA C 2004 rule 8.1 error */
@@ -70,11 +70,11 @@ SDH_INFO_T SD0;
 
 void SDH_CheckRB(SDH_T *sdh)
 {
-    while(1)
+    while (1)
     {
         sdh->CTL |= SDH_CTL_CLK8OEN_Msk;
-        while(sdh->CTL & SDH_CTL_CLK8OEN_Msk) {}
-        if(sdh->INTSTS & SDH_INTSTS_DAT0STS_Msk)
+        while (sdh->CTL & SDH_CTL_CLK8OEN_Msk) {}
+        if (sdh->INTSTS & SDH_INTSTS_DAT0STS_Msk)
         {
             break;
         }
@@ -93,9 +93,9 @@ uint32_t SDH_SDCommand(SDH_T *sdh, uint32_t u32Cmd, uint32_t u32Arg)
     sdh->CMDARG = u32Arg;
     sdh->CTL = (sdh->CTL & (~SDH_CTL_CMDCODE_Msk)) | (u32Cmd << 8) | (SDH_CTL_COEN_Msk);
 
-    while(sdh->CTL & SDH_CTL_COEN_Msk)
+    while (sdh->CTL & SDH_CTL_COEN_Msk)
     {
-        if(pSD->IsCardInsert == (uint32_t)FALSE)
+        if (pSD->IsCardInsert == (uint32_t)FALSE)
         {
             u32Status = SDH_NO_SD_CARD;
         }
@@ -114,16 +114,16 @@ uint32_t SDH_SDCmdAndRsp(SDH_T *sdh, uint32_t u32Cmd, uint32_t u32Arg, uint32_t
     sdh->CMDARG = u32Arg;
     sdh->CTL = (sdh->CTL & (~SDH_CTL_CMDCODE_Msk)) | (u32Cmd << 8) | (SDH_CTL_COEN_Msk | SDH_CTL_RIEN_Msk);
 
-    if(u32TickCount > 0UL)
+    if (u32TickCount > 0UL)
     {
-        while(sdh->CTL & SDH_CTL_RIEN_Msk)
+        while (sdh->CTL & SDH_CTL_RIEN_Msk)
         {
-            if(u32TickCount-- == 0UL)
+            if (u32TickCount-- == 0UL)
             {
                 sdh->CTL |= SDH_CTL_CTLRST_Msk; /* reset SD engine */
                 return 2UL;
             }
-            if(pSD->IsCardInsert == (uint8_t)FALSE)
+            if (pSD->IsCardInsert == (uint8_t)FALSE)
             {
                 return SDH_NO_SD_CARD;
             }
@@ -131,20 +131,20 @@ uint32_t SDH_SDCmdAndRsp(SDH_T *sdh, uint32_t u32Cmd, uint32_t u32Arg, uint32_t
     }
     else
     {
-        while(sdh->CTL & SDH_CTL_RIEN_Msk)
+        while (sdh->CTL & SDH_CTL_RIEN_Msk)
         {
-            if(pSD->IsCardInsert == (uint8_t)FALSE)
+            if (pSD->IsCardInsert == (uint8_t)FALSE)
             {
                 return SDH_NO_SD_CARD;
             }
         }
     }
 
-    if(_SDH_uR7_CMD)
+    if (_SDH_uR7_CMD)
     {
-        if((sdh->RESP1 & 0xffUL) != 0x55UL)
+        if ((sdh->RESP1 & 0xffUL) != 0x55UL)
         {
-            if((sdh->RESP0 & 0xfUL) != 0x01UL)
+            if ((sdh->RESP0 & 0xfUL) != 0x01UL)
             {
                 _SDH_uR7_CMD = 0UL;
                 return SDH_CMD8_ERROR;
@@ -152,9 +152,9 @@ uint32_t SDH_SDCmdAndRsp(SDH_T *sdh, uint32_t u32Cmd, uint32_t u32Arg, uint32_t
         }
     }
 
-    if(!g_u8R3Flag)
+    if (!g_u8R3Flag)
     {
-        if(sdh->INTSTS & SDH_INTSTS_CRC7_Msk)      /* check CRC7 */
+        if (sdh->INTSTS & SDH_INTSTS_CRC7_Msk)     /* check CRC7 */
         {
             return Successful;
         }
@@ -197,21 +197,21 @@ uint32_t SDH_SDCmdAndRsp2(SDH_T *sdh, uint32_t u32Cmd, uint32_t u32Arg, uint32_t
     sdh->CMDARG = u32Arg;
     sdh->CTL = (sdh->CTL & (~SDH_CTL_CMDCODE_Msk)) | (u32Cmd << 8) | (SDH_CTL_COEN_Msk | SDH_CTL_R2EN_Msk);
 
-    while(sdh->CTL & SDH_CTL_R2EN_Msk)
+    while (sdh->CTL & SDH_CTL_R2EN_Msk)
     {
-        if(pSD->IsCardInsert == (uint8_t)FALSE)
+        if (pSD->IsCardInsert == (uint8_t)FALSE)
         {
             return SDH_NO_SD_CARD;
         }
     }
 
-    if(sdh->INTSTS & SDH_INTSTS_CRC7_Msk)
+    if (sdh->INTSTS & SDH_INTSTS_CRC7_Msk)
     {
-        for(i = 0UL; i < 5UL; i++)
+        for (i = 0UL; i < 5UL; i++)
         {
             au32TmpBuf[i] = SDH_Swap32(sdh->FB[i]);
         }
-        for(i = 0UL; i < 4UL; i++)
+        for (i = 0UL; i < 4UL; i++)
         {
             pu32R2ptr[i] = ((au32TmpBuf[i] & 0x00ffffffUL) << 8) | ((au32TmpBuf[i + 1UL] & 0xff000000UL) >> 24);
         }
@@ -235,28 +235,28 @@ uint32_t SDH_SDCmdAndRspDataIn(SDH_T *sdh, uint32_t u32Cmd, uint32_t u32Arg)
     sdh->CTL = (sdh->CTL & (~SDH_CTL_CMDCODE_Msk)) | ((uint32_t)u32Cmd << 8) |
                (SDH_CTL_COEN_Msk | SDH_CTL_RIEN_Msk | SDH_CTL_DIEN_Msk);
 
-    while(sdh->CTL & SDH_CTL_RIEN_Msk)
+    while (sdh->CTL & SDH_CTL_RIEN_Msk)
     {
-        if(pSD->IsCardInsert == (uint32_t)FALSE)
+        if (pSD->IsCardInsert == (uint32_t)FALSE)
         {
             return SDH_NO_SD_CARD;
         }
     }
 
-    while(sdh->CTL & SDH_CTL_DIEN_Msk)
+    while (sdh->CTL & SDH_CTL_DIEN_Msk)
     {
-        if(pSD->IsCardInsert == (uint32_t)FALSE)
+        if (pSD->IsCardInsert == (uint32_t)FALSE)
         {
             return SDH_NO_SD_CARD;
         }
     }
 
-    if(!(sdh->INTSTS & SDH_INTSTS_CRC7_Msk))       /* check CRC7 */
+    if (!(sdh->INTSTS & SDH_INTSTS_CRC7_Msk))      /* check CRC7 */
     {
         return SDH_CRC7_ERROR;
     }
 
-    if(!(sdh->INTSTS & SDH_INTSTS_CRC16_Msk))      /* check CRC16 */
+    if (!(sdh->INTSTS & SDH_INTSTS_CRC16_Msk))     /* check CRC16 */
     {
         return SDH_CRC16_ERROR;
     }
@@ -270,49 +270,50 @@ uint32_t SDH_SDCmdAndRspDataIn(SDH_T *sdh, uint32_t u32Cmd, uint32_t u32Arg)
 void SDH_Set_clock(SDH_T *sdh, uint32_t u32SDClockKhz)
 {
     (void)sdh;
-    if(!(__PC() & (1UL << 28)))
+    if (!(__PC() & (1UL << 28)))
     {
         uint32_t u32Rate, u32Div1;
         static uint32_t u32SDClkSrc = 0UL;
 
+        SYS_UnlockReg();
         /* M2354 is only support SDH0 */
         u32SDClkSrc = (CLK->CLKSEL0 & CLK_CLKSEL0_SDH0SEL_Msk);
-        if(u32SDClkSrc == CLK_CLKSEL0_SDH0SEL_HXT)
+        if (u32SDClkSrc == CLK_CLKSEL0_SDH0SEL_HXT)
         {
             _SDH_ReferenceClock = (CLK_GetHXTFreq() / 1000UL);
         }
-        else if(u32SDClkSrc == CLK_CLKSEL0_SDH0SEL_HIRC)
+        else if (u32SDClkSrc == CLK_CLKSEL0_SDH0SEL_HIRC)
         {
             _SDH_ReferenceClock = (__HIRC / 1000UL);
         }
-        else if(u32SDClkSrc == CLK_CLKSEL0_SDH0SEL_PLL)
+        else if (u32SDClkSrc == CLK_CLKSEL0_SDH0SEL_PLL)
         {
             _SDH_ReferenceClock = (CLK_GetPLLClockFreq() / 1000UL);
         }
-        else if(u32SDClkSrc == CLK_CLKSEL0_SDH0SEL_HCLK)
+        else if (u32SDClkSrc == CLK_CLKSEL0_SDH0SEL_HCLK)
         {
             _SDH_ReferenceClock = (CLK_GetHCLKFreq() / 1000UL);
         }
 
-        if(u32SDClockKhz >= 50000UL)
+        if (u32SDClockKhz >= 50000UL)
         {
             u32SDClockKhz = 50000UL;
         }
         u32Rate = _SDH_ReferenceClock / u32SDClockKhz;
 
         /* choose slower clock if system clock cannot divisible by wanted clock */
-        if(_SDH_ReferenceClock % u32SDClockKhz != 0UL)
+        if (_SDH_ReferenceClock % u32SDClockKhz != 0UL)
         {
             u32Rate++;
         }
 
-        if(u32Rate >= SDH_CLK_DIV0_MAX)
+        if (u32Rate >= SDH_CLK_DIV0_MAX)
         {
             u32Rate = SDH_CLK_DIV0_MAX;
         }
 
         /* --- calculate the second divider CLKDIV0[SDHOST_N] */
-        if(u32Rate == 0UL)
+        if (u32Rate == 0UL)
         {
             u32Div1 = 0UL;
         }
@@ -336,9 +337,9 @@ uint32_t SDH_CardDetection(SDH_T *sdh)
     /* M2354 is only support SDH0 */
     pSD = &SD0;
 
-    if(sdh->INTEN & SDH_INTEN_CDSRC_Msk)   /* Card detect pin from GPIO */
+    if (sdh->INTEN & SDH_INTEN_CDSRC_Msk)  /* Card detect pin from GPIO */
     {
-        if(sdh->INTSTS & SDH_INTSTS_CDSTS_Msk)   /* Card remove */
+        if (sdh->INTSTS & SDH_INTSTS_CDSTS_Msk)  /* Card remove */
         {
             pSD->IsCardInsert = (uint8_t)FALSE;
             u32Status = (uint32_t)FALSE;
@@ -348,12 +349,12 @@ uint32_t SDH_CardDetection(SDH_T *sdh)
             pSD->IsCardInsert = (uint8_t)TRUE;
         }
     }
-    else if(!(sdh->INTEN & SDH_INTEN_CDSRC_Msk))
+    else if (!(sdh->INTEN & SDH_INTEN_CDSRC_Msk))
     {
         sdh->CTL |= SDH_CTL_CLKKEEP_Msk;
-        for(i = 0UL; i < 5000UL; i++) {}
+        for (i = 0UL; i < 5000UL; i++) {}
 
-        if(sdh->INTSTS & SDH_INTSTS_CDSTS_Msk) /* Card insert */
+        if (sdh->INTSTS & SDH_INTSTS_CDSTS_Msk) /* Card insert */
         {
             pSD->IsCardInsert = (uint8_t)TRUE;
         }
@@ -388,23 +389,23 @@ uint32_t SDH_Init(SDH_T *sdh)
     /* power ON 74 clock */
     sdh->CTL |= SDH_CTL_CLK74OEN_Msk;
 
-    while(sdh->CTL & SDH_CTL_CLK74OEN_Msk)
+    while (sdh->CTL & SDH_CTL_CLK74OEN_Msk)
     {
-        if(pSD->IsCardInsert == (uint8_t)FALSE)
+        if (pSD->IsCardInsert == (uint8_t)FALSE)
         {
             return SDH_NO_SD_CARD;
         }
     }
 
     SDH_SDCommand(sdh, 0UL, 0UL);        /* reset all cards */
-    for(i = 0x1000UL; i > 0UL; i--) {}
+    for (i = 0x1000UL; i > 0UL; i--) {}
 
     /* initial SDHC */
     _SDH_uR7_CMD = 1UL;
     u32CmdTimeOut = 0xFFFFFUL;
 
     i = SDH_SDCmdAndRsp(sdh, 8UL, 0x00000155UL, u32CmdTimeOut);
-    if(i == Successful)
+    if (i == Successful)
     {
         /* SD 2.0 */
         SDH_SDCmdAndRsp(sdh, 55UL, 0x00UL, u32CmdTimeOut);
@@ -412,14 +413,14 @@ uint32_t SDH_Init(SDH_T *sdh)
         SDH_SDCmdAndRsp(sdh, 41UL, 0x40ff8000UL, u32CmdTimeOut); /* 2.7v-3.6v */
         u32Resp = sdh->RESP0;
 
-        while(!(u32Resp & 0x00800000UL))         /* check if card is ready */
+        while (!(u32Resp & 0x00800000UL))        /* check if card is ready */
         {
             SDH_SDCmdAndRsp(sdh, 55UL, 0x00UL, u32CmdTimeOut);
             g_u8R3Flag = 1UL;
             SDH_SDCmdAndRsp(sdh, 41UL, 0x40ff8000UL, u32CmdTimeOut); /* 3.0v-3.4v */
             u32Resp = sdh->RESP0;
         }
-        if(u32Resp & 0x00400000UL)
+        if (u32Resp & 0x00400000UL)
         {
             pSD->CardType = SDH_TYPE_SD_HIGH;
         }
@@ -432,20 +433,20 @@ uint32_t SDH_Init(SDH_T *sdh)
     {
         /* SD 1.1 */
         SDH_SDCommand(sdh, 0UL, 0UL);        /* reset all cards */
-        for(i = 0x100UL; i > 0UL; i--) {}
+        for (i = 0x100UL; i > 0UL; i--) {}
 
         i = SDH_SDCmdAndRsp(sdh, 55UL, 0x00UL, u32CmdTimeOut);
-        if(i == 2UL)      /* MMC memory */
+        if (i == 2UL)     /* MMC memory */
         {
             SDH_SDCommand(sdh, 0UL, 0UL);        /* reset */
-            for(i = 0x100UL; i > 0UL; i--) {}
+            for (i = 0x100UL; i > 0UL; i--) {}
 
             g_u8R3Flag = 1UL;
 
-            if(SDH_SDCmdAndRsp(sdh, 1UL, 0x40ff8000UL, u32CmdTimeOut) != 2UL)     /* eMMC memory */
+            if (SDH_SDCmdAndRsp(sdh, 1UL, 0x40ff8000UL, u32CmdTimeOut) != 2UL)    /* eMMC memory */
             {
                 u32Resp = sdh->RESP0;
-                while(!(u32Resp & 0x00800000UL))         /* check if card is ready */
+                while (!(u32Resp & 0x00800000UL))        /* check if card is ready */
                 {
                     g_u8R3Flag = 1UL;
 
@@ -453,7 +454,7 @@ uint32_t SDH_Init(SDH_T *sdh)
                     u32Resp = sdh->RESP0;
                 }
 
-                if(u32Resp & 0x00400000UL)
+                if (u32Resp & 0x00400000UL)
                 {
                     pSD->CardType = SDH_TYPE_EMMC;
                 }
@@ -468,12 +469,12 @@ uint32_t SDH_Init(SDH_T *sdh)
                 return SDH_ERR_DEVICE;
             }
         }
-        else if(i == 0UL)      /* SD Memory */
+        else if (i == 0UL)     /* SD Memory */
         {
             g_u8R3Flag = 1UL;
             SDH_SDCmdAndRsp(sdh, 41UL, 0x00ff8000UL, u32CmdTimeOut); /* 3.0v-3.4v */
             u32Resp = sdh->RESP0;
-            while(!(u32Resp & 0x00800000UL))         /* check if card is ready */
+            while (!(u32Resp & 0x00800000UL))        /* check if card is ready */
             {
                 SDH_SDCmdAndRsp(sdh, 55UL, 0x00UL, u32CmdTimeOut);
                 g_u8R3Flag = 1UL;
@@ -490,12 +491,12 @@ uint32_t SDH_Init(SDH_T *sdh)
     }
 
     /* CMD2, CMD3 */
-    if(pSD->CardType != SDH_TYPE_UNKNOWN)
+    if (pSD->CardType != SDH_TYPE_UNKNOWN)
     {
         SDH_SDCmdAndRsp2(sdh, 2UL, 0x00UL, au32CIDBuffer);
-        if((pSD->CardType == SDH_TYPE_MMC) || (pSD->CardType == SDH_TYPE_EMMC))
+        if ((pSD->CardType == SDH_TYPE_MMC) || (pSD->CardType == SDH_TYPE_EMMC))
         {
-            if((u32Status = SDH_SDCmdAndRsp(sdh, 3UL, 0x10000UL, 0UL)) != Successful)         /* set RCA */
+            if ((u32Status = SDH_SDCmdAndRsp(sdh, 3UL, 0x10000UL, 0UL)) != Successful)        /* set RCA */
             {
                 return u32Status;
             }
@@ -503,7 +504,7 @@ uint32_t SDH_Init(SDH_T *sdh)
         }
         else
         {
-            if((u32Status = SDH_SDCmdAndRsp(sdh, 3UL, 0x00UL, 0UL)) != Successful)        /* get RCA */
+            if ((u32Status = SDH_SDCmdAndRsp(sdh, 3UL, 0x00UL, 0UL)) != Successful)       /* get RCA */
             {
                 return u32Status;
             }
@@ -527,14 +528,14 @@ uint32_t SDH_SwitchToHighSpeed(SDH_T *sdh, SDH_INFO_T *pSD)
     sdh->DMASA = (uint32_t)_SDH_ucSDHCBuffer;    /* set DMA transfer starting address */
     sdh->BLEN = 63UL;    /* 512 bit */
 
-    if((u32Status = SDH_SDCmdAndRspDataIn(sdh, 6UL, 0x00ffff01UL)) != Successful)
+    if ((u32Status = SDH_SDCmdAndRspDataIn(sdh, 6UL, 0x00ffff01UL)) != Successful)
     {
         return Fail;
     }
 
     u16CurrentComsumption = (uint16_t)(_SDH_ucSDHCBuffer[0] << 8);
     u16CurrentComsumption |= (uint16_t)_SDH_ucSDHCBuffer[1];
-    if(!u16CurrentComsumption)
+    if (!u16CurrentComsumption)
     {
         return Fail;
     }
@@ -542,23 +543,23 @@ uint32_t SDH_SwitchToHighSpeed(SDH_T *sdh, SDH_INFO_T *pSD)
     u16BusyStatus0 = (uint16_t)(_SDH_ucSDHCBuffer[28] << 8);
     u16BusyStatus0 |= (uint16_t)_SDH_ucSDHCBuffer[29];
 
-    if(!u16BusyStatus0)    /* function ready */
+    if (!u16BusyStatus0)   /* function ready */
     {
         sdh->DMASA = (uint32_t)_SDH_ucSDHCBuffer;        /* set DMA transfer starting address */
         sdh->BLEN = 63UL;    /* 512 bit */
 
-        if((u32Status = SDH_SDCmdAndRspDataIn(sdh, 6UL, 0x80ffff01UL)) != Successful)
+        if ((u32Status = SDH_SDCmdAndRspDataIn(sdh, 6UL, 0x80ffff01UL)) != Successful)
         {
             return Fail;
         }
 
         /* function change timing: 8 clocks */
         sdh->CTL |= SDH_CTL_CLK8OEN_Msk;
-        while(sdh->CTL & SDH_CTL_CLK8OEN_Msk) {}
+        while (sdh->CTL & SDH_CTL_CLK8OEN_Msk) {}
 
         u16CurrentComsumption = (uint16_t)(_SDH_ucSDHCBuffer[0] << 8);
         u16CurrentComsumption |= (uint16_t)_SDH_ucSDHCBuffer[1];
-        if(!u16CurrentComsumption)
+        if (!u16CurrentComsumption)
         {
             return Fail;
         }
@@ -581,7 +582,7 @@ uint32_t SDH_SelectCardType(SDH_T *sdh)
     /* M2354 is only support SDH0 */
     pSD = &SD0;
 
-    if((u32Status = SDH_SDCmdAndRsp(sdh, 7UL, pSD->RCA, 0UL)) != Successful)
+    if ((u32Status = SDH_SDCmdAndRsp(sdh, 7UL, pSD->RCA, 0UL)) != Successful)
     {
         return u32Status;
     }
@@ -589,76 +590,76 @@ uint32_t SDH_SelectCardType(SDH_T *sdh)
     SDH_CheckRB(sdh);
 
     /* if SD card set 4bit */
-    if(pSD->CardType == SDH_TYPE_SD_HIGH)
+    if (pSD->CardType == SDH_TYPE_SD_HIGH)
     {
         sdh->DMASA = (uint32_t)_SDH_ucSDHCBuffer;    /* set DMA transfer starting address */
         sdh->BLEN = 0x07UL;  /* 64 bit */
 
-        if((u32Status = SDH_SDCmdAndRsp(sdh, 55UL, pSD->RCA, 0UL)) != Successful)
+        if ((u32Status = SDH_SDCmdAndRsp(sdh, 55UL, pSD->RCA, 0UL)) != Successful)
         {
             return u32Status;
         }
 
         sdh->DMACTL |= 0x2;
-        while(sdh->DMACTL & 0x2) {}
+        while (sdh->DMACTL & 0x2) {}
 
-        if((u32Status = SDH_SDCmdAndRspDataIn(sdh, 51UL, 0x00UL)) != Successful)
+        if ((u32Status = SDH_SDCmdAndRspDataIn(sdh, 51UL, 0x00UL)) != Successful)
         {
             return u32Status;
         }
 
-        if((_SDH_ucSDHCBuffer[0] & 0xfUL) == 0xfUL)
+        if ((_SDH_ucSDHCBuffer[0] & 0xfUL) == 0xfUL)
         {
             u32Status = SDH_SwitchToHighSpeed(sdh, pSD);
-            if(u32Status == Successful)
+            if (u32Status == Successful)
             {
                 /* divider */
                 SDH_Set_clock(sdh, SDHC_FREQ);
             }
         }
 
-        if((u32Status = SDH_SDCmdAndRsp(sdh, 55UL, pSD->RCA, 0UL)) != Successful)
+        if ((u32Status = SDH_SDCmdAndRsp(sdh, 55UL, pSD->RCA, 0UL)) != Successful)
         {
             return u32Status;
         }
-        if((u32Status = SDH_SDCmdAndRsp(sdh, 6UL, 0x02UL, 0UL)) != Successful)    /* set bus width */
+        if ((u32Status = SDH_SDCmdAndRsp(sdh, 6UL, 0x02UL, 0UL)) != Successful)   /* set bus width */
         {
             return u32Status;
         }
 
         sdh->CTL |= SDH_CTL_DBW_Msk;
     }
-    else if(pSD->CardType == SDH_TYPE_SD_LOW)
+    else if (pSD->CardType == SDH_TYPE_SD_LOW)
     {
         sdh->DMASA = (uint32_t) _SDH_ucSDHCBuffer; /* set DMA transfer starting address */
         sdh->BLEN = 0x07UL;  /* 64 bit */
 
-        if((u32Status = SDH_SDCmdAndRsp(sdh, 55UL, pSD->RCA, 0UL)) != Successful)
+        if ((u32Status = SDH_SDCmdAndRsp(sdh, 55UL, pSD->RCA, 0UL)) != Successful)
         {
             return u32Status;
         }
-        if((u32Status = SDH_SDCmdAndRspDataIn(sdh, 51UL, 0x00UL)) != Successful)
+        if ((u32Status = SDH_SDCmdAndRspDataIn(sdh, 51UL, 0x00UL)) != Successful)
         {
             return u32Status;
         }
 
         /* set data bus width. ACMD6 for SD card, SDCR_DBW for host. */
-        if((u32Status = SDH_SDCmdAndRsp(sdh, 55UL, pSD->RCA, 0UL)) != Successful)
+        if ((u32Status = SDH_SDCmdAndRsp(sdh, 55UL, pSD->RCA, 0UL)) != Successful)
         {
             return u32Status;
         }
 
-        if((u32Status = SDH_SDCmdAndRsp(sdh, 6UL, 0x02UL, 0UL)) != Successful)    /* set bus width */
+        if ((u32Status = SDH_SDCmdAndRsp(sdh, 6UL, 0x02UL, 0UL)) != Successful)   /* set bus width */
         {
             return u32Status;
         }
 
         sdh->CTL |= SDH_CTL_DBW_Msk;
     }
-    else if((pSD->CardType == SDH_TYPE_MMC) || (pSD->CardType == SDH_TYPE_EMMC))
+    else if ((pSD->CardType == SDH_TYPE_MMC) || (pSD->CardType == SDH_TYPE_EMMC))
     {
 
-        if(pSD->CardType == SDH_TYPE_MMC)
+        if (pSD->CardType == SDH_TYPE_MMC)
         {
             sdh->CTL &= ~SDH_CTL_DBW_Msk;
         }
@@ -666,7 +667,7 @@ uint32_t SDH_SelectCardType(SDH_T *sdh)
         /* --- sent CMD6 to MMC card to set bus width to 4 bits mode */
         /* set CMD6 argument Access field to 3, Index to 183, Value to 1 (4-bit mode) */
         u32Param = (3UL << 24) | (183UL << 16) | (1UL << 8);
-        if((u32Status = SDH_SDCmdAndRsp(sdh, 6UL, u32Param, 0UL)) != Successful)
+        if ((u32Status = SDH_SDCmdAndRsp(sdh, 6UL, u32Param, 0UL)) != Successful)
         {
             return u32Status;
         }
@@ -675,7 +676,7 @@ uint32_t SDH_SelectCardType(SDH_T *sdh)
         sdh->CTL |= SDH_CTL_DBW_Msk; /* set bus width to 4-bit mode for SD host controller */
     }
 
-    if((u32Status = SDH_SDCmdAndRsp(sdh, 16UL, SDH_BLOCK_SIZE, 0UL)) != Successful)  /* set block length */
+    if ((u32Status = SDH_SDCmdAndRsp(sdh, 16UL, SDH_BLOCK_SIZE, 0UL)) != Successful) /* set block length */
     {
         return u32Status;
     }
@@ -683,7 +684,7 @@ uint32_t SDH_SelectCardType(SDH_T *sdh)
 
     SDH_SDCommand(sdh, 7UL, 0UL);
     sdh->CTL |= SDH_CTL_CLK8OEN_Msk;
-    while(sdh->CTL & SDH_CTL_CLK8OEN_Msk) {}
+    while (sdh->CTL & SDH_CTL_CLK8OEN_Msk) {}
 
     sdh->INTEN |= SDH_INTEN_BLKDIEN_Msk;
 
@@ -701,10 +702,10 @@ void SDH_Get_SD_info(SDH_T *sdh)
 
     SDH_SDCmdAndRsp2(sdh, 9UL, pSD->RCA, au32Buffer);
 
-    if((pSD->CardType == SDH_TYPE_MMC) || (pSD->CardType == SDH_TYPE_EMMC))
+    if ((pSD->CardType == SDH_TYPE_MMC) || (pSD->CardType == SDH_TYPE_EMMC))
     {
         /* for MMC/eMMC card */
-        if((au32Buffer[0] & 0xc0000000UL) == 0xc0000000UL)
+        if ((au32Buffer[0] & 0xc0000000UL) == 0xc0000000UL)
         {
             /* CSD_STRUCTURE [127:126] is 3 */
             /* CSD version depend on EXT_CSD register in eMMC v4.4 for card size > 2GB */
@@ -713,14 +714,14 @@ void SDH_Get_SD_info(SDH_T *sdh)
             sdh->DMASA = (uint32_t)_SDH_ucSDHCBuffer;  /* set DMA transfer starting address */
             sdh->BLEN = 511UL;  /* read 512 bytes for EXT_CSD */
 
-            if(SDH_SDCmdAndRspDataIn(sdh, 8UL, 0x00UL) != Successful)
+            if (SDH_SDCmdAndRspDataIn(sdh, 8UL, 0x00UL) != Successful)
             {
                 return;
             }
 
             SDH_SDCommand(sdh, 7UL, 0UL);
             sdh->CTL |= SDH_CTL_CLK8OEN_Msk;
-            while(sdh->CTL & SDH_CTL_CLK8OEN_Msk) {}
+            while (sdh->CTL & SDH_CTL_CLK8OEN_Msk) {}
 
             pSD->totalSectorN = (uint32_t)_SDH_ucSDHCBuffer[215] << 24;
             pSD->totalSectorN |= (uint32_t)_SDH_ucSDHCBuffer[214] << 16;
@@ -742,7 +743,7 @@ void SDH_Get_SD_info(SDH_T *sdh)
     }
     else
     {
-        if(au32Buffer[0] & 0xc0000000UL)
+        if (au32Buffer[0] & 0xc0000000UL)
         {
             u32CSize = ((au32Buffer[1] & 0x0000003fUL) << 16) | ((au32Buffer[2] & 0xffff0000UL) >> 16);
             u32Size = (u32CSize + 1UL) * 512UL;  /* Kbytes */
@@ -779,20 +780,20 @@ void SDH_Open(SDH_T *sdh, uint32_t u32CardDetSrc)
 {
     /* enable DMAC */
     sdh->DMACTL = SDH_DMACTL_DMARST_Msk;
-    while(sdh->DMACTL & SDH_DMACTL_DMARST_Msk) {}
+    while (sdh->DMACTL & SDH_DMACTL_DMARST_Msk) {}
 
     sdh->DMACTL = SDH_DMACTL_DMAEN_Msk;
 
     /* Reset FMI */
     sdh->GCTL = SDH_GCTL_GCTLRST_Msk | SDH_GCTL_SDEN_Msk;        /* Start reset FMI controller. */
-    while(sdh->GCTL & SDH_GCTL_GCTLRST_Msk) {}
+    while (sdh->GCTL & SDH_GCTL_GCTLRST_Msk) {}
 
     memset(&SD0, 0, sizeof(SDH_INFO_T));
 
     /* enable SD */
     sdh->GCTL = SDH_GCTL_SDEN_Msk;
 
-    if(u32CardDetSrc & CardDetect_From_DAT3)
+    if (u32CardDetSrc & CardDetect_From_DAT3)
     {
         sdh->INTEN &= ~SDH_INTEN_CDSRC_Msk;
     }
@@ -803,7 +804,7 @@ void SDH_Open(SDH_T *sdh, uint32_t u32CardDetSrc)
     sdh->INTEN |= SDH_INTEN_CDIEN_Msk;
 
     sdh->CTL |= SDH_CTL_CTLRST_Msk;     /* SD software reset */
-    while(sdh->CTL & SDH_CTL_CTLRST_Msk) {}
+    while (sdh->CTL & SDH_CTL_CTLRST_Msk) {}
 
 }
 
@@ -831,18 +832,18 @@ uint32_t SDH_Probe(SDH_T *sdh)
     sdh->CTL |=  0x01UL << SDH_CTL_BLKCNT_Pos;           /* set BLKCNT = 1 */
     sdh->CTL &= ~SDH_CTL_DBW_Msk;               /* SD 1-bit data bus */
 
-    if(!(SDH_CardDetection(sdh)))
+    if (!(SDH_CardDetection(sdh)))
     {
         return SDH_NO_SD_CARD;
     }
 
-    if((u32Val = SDH_Init(sdh)) != 0UL)
+    if ((u32Val = SDH_Init(sdh)) != 0UL)
     {
         return u32Val;
     }
 
     /* divider */
-    if(SD0.CardType == SDH_TYPE_MMC)
+    if (SD0.CardType == SDH_TYPE_MMC)
     {
         SDH_Set_clock(sdh, MMC_FREQ);
     }
@@ -852,7 +853,7 @@ uint32_t SDH_Probe(SDH_T *sdh)
     }
     SDH_Get_SD_info(sdh);
 
-    if((u32Val = SDH_SelectCardType(sdh)) != 0UL)
+    if ((u32Val = SDH_SelectCardType(sdh)) != 0UL)
     {
         return u32Val;
     }
@@ -883,12 +884,12 @@ uint32_t SDH_Read(SDH_T *sdh, uint8_t *pu8BufAddr, uint32_t u32StartSec, uint32_
     pSD = &SD0;
 
     /* --- check input parameters */
-    if(u32SecCount == 0UL)
+    if (u32SecCount == 0UL)
     {
         return SDH_SELECT_ERROR;
     }
 
-    if((u32Status = SDH_SDCmdAndRsp(sdh, 7UL, pSD->RCA, 0UL)) != Successful)
+    if ((u32Status = SDH_SDCmdAndRsp(sdh, 7UL, pSD->RCA, 0UL)) != Successful)
     {
         return u32Status;
     }
@@ -896,7 +897,7 @@ uint32_t SDH_Read(SDH_T *sdh, uint8_t *pu8BufAddr, uint32_t u32StartSec, uint32_
 
     sdh->BLEN = u32BlkSize - 1UL;       /* the actual byte count is equal to (SDBLEN+1) */
 
-    if((pSD->CardType == SDH_TYPE_SD_HIGH) || (pSD->CardType == SDH_TYPE_EMMC))
+    if ((pSD->CardType == SDH_TYPE_SD_HIGH) || (pSD->CardType == SDH_TYPE_EMMC))
     {
         sdh->CMDARG = u32StartSec;
     }
@@ -908,12 +909,12 @@ uint32_t SDH_Read(SDH_T *sdh, uint8_t *pu8BufAddr, uint32_t u32StartSec, uint32_
     sdh->DMASA = (uint32_t)pu8BufAddr;
 
     u32Loop = u32SecCount / 255UL;
-    while(u32Loop > 0UL)
+    while (u32Loop > 0UL)
     {
         g_u8SDDataReadyFlag = (uint8_t)FALSE;
         u32Reg = sdh->CTL & ~SDH_CTL_CMDCODE_Msk;
         u32Reg = u32Reg | 0xff0000UL;   /* set BLK_CNT to 255 */
-        if(u32IsSendCmd == (uint32_t)FALSE)
+        if (u32IsSendCmd == (uint32_t)FALSE)
         {
             sdh->CTL = u32Reg | (18UL << 8) | (SDH_CTL_COEN_Msk | SDH_CTL_RIEN_Msk | SDH_CTL_DIEN_Msk);
             u32IsSendCmd = (uint32_t)TRUE;
@@ -923,24 +924,24 @@ uint32_t SDH_Read(SDH_T *sdh, uint8_t *pu8BufAddr, uint32_t u32StartSec, uint32_
             sdh->CTL = u32Reg | SDH_CTL_DIEN_Msk;
         }
 
-        while(!g_u8SDDataReadyFlag)
+        while (!g_u8SDDataReadyFlag)
         {
-            if(g_u8SDDataReadyFlag)
+            if (g_u8SDDataReadyFlag)
             {
                 break;
             }
-            if(pSD->IsCardInsert == (uint8_t)FALSE)
+            if (pSD->IsCardInsert == (uint8_t)FALSE)
             {
                 return SDH_NO_SD_CARD;
             }
         }
 
-        if(!(sdh->INTSTS & SDH_INTSTS_CRC7_Msk))     /* check CRC7 */
+        if (!(sdh->INTSTS & SDH_INTSTS_CRC7_Msk))    /* check CRC7 */
         {
             return SDH_CRC7_ERROR;
         }
 
-        if(!(sdh->INTSTS & SDH_INTSTS_CRC16_Msk))    /* check CRC16 */
+        if (!(sdh->INTSTS & SDH_INTSTS_CRC16_Msk))   /* check CRC16 */
         {
             return SDH_CRC16_ERROR;
         }
@@ -948,7 +949,7 @@ uint32_t SDH_Read(SDH_T *sdh, uint8_t *pu8BufAddr, uint32_t u32StartSec, uint32_
     }
 
     u32Loop = u32SecCount % 255UL;
-    if(u32Loop != 0UL)
+    if (u32Loop != 0UL)
     {
         uint32_t u32RegTmp;
         g_u8SDDataReadyFlag = (uint8_t)FALSE;
@@ -957,7 +958,7 @@ uint32_t SDH_Read(SDH_T *sdh, uint8_t *pu8BufAddr, uint32_t u32StartSec, uint32_
         u32RegTmp = (u32Loop << 16);
         u32Reg |= u32RegTmp;    /* setup SDCR_BLKCNT */
 
-        if(u32IsSendCmd == (uint32_t)FALSE)
+        if (u32IsSendCmd == (uint32_t)FALSE)
         {
             sdh->CTL = u32Reg | (18UL << 8) | (SDH_CTL_COEN_Msk | SDH_CTL_RIEN_Msk | SDH_CTL_DIEN_Msk);
             u32IsSendCmd = (uint32_t)TRUE;
@@ -967,26 +968,26 @@ uint32_t SDH_Read(SDH_T *sdh, uint8_t *pu8BufAddr, uint32_t u32StartSec, uint32_
             sdh->CTL = u32Reg | SDH_CTL_DIEN_Msk;
         }
 
-        while(!g_u8SDDataReadyFlag)
+        while (!g_u8SDDataReadyFlag)
         {
-            if(pSD->IsCardInsert == (uint8_t)FALSE)
+            if (pSD->IsCardInsert == (uint8_t)FALSE)
             {
                 return SDH_NO_SD_CARD;
             }
         }
 
-        if(!(sdh->INTSTS & SDH_INTSTS_CRC7_Msk))     /* check CRC7 */
+        if (!(sdh->INTSTS & SDH_INTSTS_CRC7_Msk))    /* check CRC7 */
         {
             return SDH_CRC7_ERROR;
         }
 
-        if(!(sdh->INTSTS & SDH_INTSTS_CRC16_Msk))     /* check CRC16 */
+        if (!(sdh->INTSTS & SDH_INTSTS_CRC16_Msk))    /* check CRC16 */
         {
             return SDH_CRC16_ERROR;
         }
     }
 
-    if(SDH_SDCmdAndRsp(sdh, 12UL, 0UL, 0UL))     /* stop command */
+    if (SDH_SDCmdAndRsp(sdh, 12UL, 0UL, 0UL))    /* stop command */
     {
         return SDH_CRC7_ERROR;
     }
@@ -994,7 +995,7 @@ uint32_t SDH_Read(SDH_T *sdh, uint8_t *pu8BufAddr, uint32_t u32StartSec, uint32_
 
     SDH_SDCommand(sdh, 7UL, 0UL);
     sdh->CTL |= SDH_CTL_CLK8OEN_Msk;
-    while(sdh->CTL & SDH_CTL_CLK8OEN_Msk) {}
+    while (sdh->CTL & SDH_CTL_CLK8OEN_Msk) {}
 
     return Successful;
 }
@@ -1025,12 +1026,12 @@ uint32_t SDH_Write(SDH_T *sdh, uint8_t *pu8BufAddr, uint32_t u32StartSec, uint32
     pSD = &SD0;
 
     /* --- check input parameters */
-    if(u32SecCount == 0UL)
+    if (u32SecCount == 0UL)
     {
         return SDH_SELECT_ERROR;
     }
 
-    if((u32Status = SDH_SDCmdAndRsp(sdh, 7UL, pSD->RCA, 0UL)) != Successful)
+    if ((u32Status = SDH_SDCmdAndRsp(sdh, 7UL, pSD->RCA, 0UL)) != Successful)
     {
         return u32Status;
     }
@@ -1040,7 +1041,7 @@ uint32_t SDH_Write(SDH_T *sdh, uint8_t *pu8BufAddr, uint32_t u32StartSec, uint32
     /* According to SD Spec v2.0, the write CMD block size MUST be 512, and the start address MUST be 512*n. */
     sdh->BLEN = SDH_BLOCK_SIZE - 1UL;           /* set the block size */
 
-    if((pSD->CardType == SDH_TYPE_SD_HIGH) || (pSD->CardType == SDH_TYPE_EMMC))
+    if ((pSD->CardType == SDH_TYPE_SD_HIGH) || (pSD->CardType == SDH_TYPE_EMMC))
     {
         sdh->CMDARG = u32StartSec;
     }
@@ -1051,12 +1052,12 @@ uint32_t SDH_Write(SDH_T *sdh, uint8_t *pu8BufAddr, uint32_t u32StartSec, uint32
 
     sdh->DMASA = (uint32_t)pu8BufAddr;
     u32Loop = u32SecCount / 255UL;   /* the maximum block count is 0xFF=255 for register SDCR[BLK_CNT] */
-    while(u32Loop > 0UL)
+    while (u32Loop > 0UL)
     {
         g_u8SDDataReadyFlag = (uint8_t)FALSE;
         u32Reg = sdh->CTL & 0xff00c080UL;
         u32Reg = u32Reg | 0xff0000UL;   /* set BLK_CNT to 0xFF=255 */
-        if(!u32IsSendCmd)
+        if (!u32IsSendCmd)
         {
             sdh->CTL = u32Reg | (25UL << 8) | (SDH_CTL_COEN_Msk | SDH_CTL_RIEN_Msk | SDH_CTL_DOEN_Msk);
             u32IsSendCmd = (uint32_t)TRUE;
@@ -1066,15 +1067,15 @@ uint32_t SDH_Write(SDH_T *sdh, uint8_t *pu8BufAddr, uint32_t u32StartSec, uint32
             sdh->CTL = u32Reg | SDH_CTL_DOEN_Msk;
         }
 
-        while(!g_u8SDDataReadyFlag)
+        while (!g_u8SDDataReadyFlag)
         {
-            if(pSD->IsCardInsert == (uint8_t)FALSE)
+            if (pSD->IsCardInsert == (uint8_t)FALSE)
             {
                 return SDH_NO_SD_CARD;
             }
         }
 
-        if((sdh->INTSTS & SDH_INTSTS_CRCIF_Msk) != 0UL)      /* check CRC */
+        if ((sdh->INTSTS & SDH_INTSTS_CRCIF_Msk) != 0UL)     /* check CRC */
         {
             sdh->INTSTS = SDH_INTSTS_CRCIF_Msk;
             return SDH_CRC_ERROR;
@@ -1083,13 +1084,13 @@ uint32_t SDH_Write(SDH_T *sdh, uint8_t *pu8BufAddr, uint32_t u32StartSec, uint32
     }
 
     u32Loop = u32SecCount % 255UL;
-    if(u32Loop != 0UL)
+    if (u32Loop != 0UL)
     {
         uint32_t u32RegTmp;
         g_u8SDDataReadyFlag = (uint8_t)FALSE;
         u32RegTmp = (u32Loop << 16);
         u32Reg = (sdh->CTL & 0xff00c080UL) | u32RegTmp;
-        if(!u32IsSendCmd)
+        if (!u32IsSendCmd)
         {
             sdh->CTL = u32Reg | (25UL << 8) | (SDH_CTL_COEN_Msk | SDH_CTL_RIEN_Msk | SDH_CTL_DOEN_Msk);
             u32IsSendCmd = (uint32_t)TRUE;
@@ -1099,15 +1100,15 @@ uint32_t SDH_Write(SDH_T *sdh, uint8_t *pu8BufAddr, uint32_t u32StartSec, uint32
             sdh->CTL = u32Reg | SDH_CTL_DOEN_Msk;
         }
 
-        while(!g_u8SDDataReadyFlag)
+        while (!g_u8SDDataReadyFlag)
         {
-            if(pSD->IsCardInsert == (uint8_t)FALSE)
+            if (pSD->IsCardInsert == (uint8_t)FALSE)
             {
                 return SDH_NO_SD_CARD;
             }
         }
 
-        if((sdh->INTSTS & SDH_INTSTS_CRCIF_Msk) != 0UL)      /* check CRC */
+        if ((sdh->INTSTS & SDH_INTSTS_CRCIF_Msk) != 0UL)     /* check CRC */
         {
             sdh->INTSTS = SDH_INTSTS_CRCIF_Msk;
             return SDH_CRC_ERROR;
@@ -1115,7 +1116,7 @@ uint32_t SDH_Write(SDH_T *sdh, uint8_t *pu8BufAddr, uint32_t u32StartSec, uint32
     }
     sdh->INTSTS = SDH_INTSTS_CRCIF_Msk;
 
-    if(SDH_SDCmdAndRsp(sdh, 12UL, 0UL, 0UL))       /* stop command */
+    if (SDH_SDCmdAndRsp(sdh, 12UL, 0UL, 0UL))      /* stop command */
     {
         return SDH_CRC7_ERROR;
     }
@@ -1123,7 +1124,7 @@ uint32_t SDH_Write(SDH_T *sdh, uint8_t *pu8BufAddr, uint32_t u32StartSec, uint32
 
     SDH_SDCommand(sdh, 7UL, 0UL);
     sdh->CTL |= SDH_CTL_CLK8OEN_Msk;
-    while(sdh->CTL & SDH_CTL_CLK8OEN_Msk) {}
+    while (sdh->CTL & SDH_CTL_CLK8OEN_Msk) {}
 
     return Successful;
 }

bsp/nuvoton/libraries/m2354/rtt_port/Kconfig

@@ -470,23 +470,14 @@ config SOC_SERIES_M2354
     menuconfig BSP_USING_SDH
         bool "Enable Secure Digital Host Controller(SDH)"
         select RT_USING_DFS
-        select DFS_USING_POSIX
+        select RT_USING_SDIO
 
         if BSP_USING_SDH
             config BSP_USING_SDH0
                 bool "Enable SDH0"
 
-            config NU_SDH_USING_PDMA
-                bool "Using PDMA"
-                select BSP_USING_PDMA
-
-            config NU_SDH_HOTPLUG
-                bool "Using HOTPLUG"
-                default y
-
-            config NU_SDH_MOUNT_ON_ROOT
-                bool "Mount on root"
-
+            config BSP_USING_SDH1
+                bool "Enable SDH1"
         endif
 
     menuconfig BSP_USING_CAN

bsp/nuvoton/libraries/m2354/rtt_port/drv_crypto.c

@@ -7,6 +7,7 @@
 * Change Logs:
 * Date            Author         Notes
 * 2020-7-3        YCHuang12      First version
+* 2022-4-17       Wayne          Fix TRNG and PRNG selection
 *
 ******************************************************************************/
 
@@ -15,7 +16,6 @@
 #if ((defined(BSP_USING_CRYPTO) || defined(BSP_USING_TRNG) || defined(BSP_USING_CRC)) && defined(RT_USING_HWCRYPTO))
 
 #include <rtdevice.h>
-#include <rtdbg.h>
 #include <board.h>
 #include "NuMicro.h"
 #include <nu_bitutil.h>
@@ -29,6 +29,13 @@
 #endif
 
 /* Private typedef --------------------------------------------------------------*/
+#define LOG_TAG         "CRYPTO"
+#define DBG_ENABLE
+#define DBG_SECTION_NAME "CRYPTO"
+#define DBG_LEVEL DBG_INFO
+#define DBG_COLOR
+#include <rtdbg.h>
+
 typedef struct
 {
     uint8_t *pu8SHATempBuf;
@@ -57,17 +64,11 @@ static const struct rt_hwcrypto_ops nu_hwcrypto_ops =
 
 #define NU_HWCRYPTO_AES_NAME    "nu_AES"
 #define NU_HWCRYPTO_SHA_NAME    "nu_SHA"
-#if !defined(BSP_USING_TRNG)
-    #define NU_HWCRYPTO_PRNG_NAME   "nu_PRNG"
-#endif
+#define NU_HWCRYPTO_PRNG_NAME   "nu_PRNG"
 
 static struct rt_mutex s_AES_mutex;
 static struct rt_mutex s_SHA_mutex;
 
-#if !defined(BSP_USING_TRNG)
-    static struct rt_mutex s_PRNG_mutex;
-#endif
-
 static rt_err_t nu_crypto_init(void)
 {
     rt_err_t result = RT_EOK;
@@ -85,12 +86,6 @@ static rt_err_t nu_crypto_init(void)
     SHA_ENABLE_INT(CRPT);
 #endif
 
-#if defined(RT_HWCRYPTO_USING_RNG) && !defined(BSP_USING_TRNG)
-    result = rt_mutex_init(&s_PRNG_mutex, NU_HWCRYPTO_PRNG_NAME, RT_IPC_FLAG_PRIO);
-    RT_ASSERT(result == RT_EOK);
-    PRNG_ENABLE_INT(CRPT);
-#endif
-
     return result;
 }
 
@@ -163,46 +158,33 @@ static rt_err_t nu_aes_crypt_run(
     return RT_EOK;
 }
 
-#if !defined(BSP_USING_TRNG)
-//Using PRNG instead of TRNG
-static void nu_prng_open(uint32_t u32Seed)
+static rt_err_t nu_prng_init(void)
 {
-    rt_err_t result;
+    uint32_t u32Seed;
 
-    result = rt_mutex_take(&s_PRNG_mutex, RT_WAITING_FOREVER);
-    RT_ASSERT(result == RT_EOK);
+#if defined(NU_PRNG_USE_SEED)
+    u32Seed = NU_PRNG_SEED_VALUE;
+#else
+    u32Seed = (uint32_t)rt_tick_get();
+#endif
 
     //Open PRNG 128 bits.
     PRNG_Open(CRPT, PRNG_KEY_SIZE_128, PRNG_SEED_RELOAD, u32Seed);
 
-    result = rt_mutex_release(&s_PRNG_mutex);
-    RT_ASSERT(result == RT_EOK);
+    return RT_EOK;
 }
 
-static rt_uint32_t nu_prng_run(void)
+static rt_uint32_t nu_prng_rand(struct hwcrypto_rng *ctx)
 {
     uint32_t au32RNGValue[4];
-    rt_err_t result;
-
-    result = rt_mutex_take(&s_PRNG_mutex, RT_WAITING_FOREVER);
-    RT_ASSERT(result == RT_EOK);
 
     PRNG_Start(CRPT);
-    while ((CRPT->PRNG_CTL & CRPT_PRNG_CTL_BUSY_Msk)) {};
-
-    /* Clear PRNG interrupt status */
-    PRNG_CLR_INT_FLAG(CRPT);
 
     PRNG_Read(CRPT, &au32RNGValue[0]);
 
-    result = rt_mutex_release(&s_PRNG_mutex);
-    RT_ASSERT(result == RT_EOK);
-
     return au32RNGValue[0] ^ au32RNGValue[1] ^ au32RNGValue[2] ^ au32RNGValue[3];
 }
 
-#endif
-
 static rt_err_t nu_aes_crypt(struct hwcrypto_symmetric *symmetric_ctx, struct hwcrypto_symmetric_info *symmetric_info)
 {
     uint32_t u32AESOpMode;
@@ -606,14 +588,6 @@ static rt_err_t nu_sha_finish(struct hwcrypto_hash *hash_ctx, rt_uint8_t *out, r
     return RT_EOK;
 }
 
-#if !defined(BSP_USING_TRNG)
-static rt_uint32_t nu_prng_rand(struct hwcrypto_rng *ctx)
-{
-    return nu_prng_run();
-}
-
-#endif
-
 static const struct hwcrypto_symmetric_ops nu_aes_ops =
 {
     .crypt = nu_aes_crypt,
@@ -624,34 +598,19 @@ static const struct hwcrypto_hash_ops nu_sha_ops =
     .update = nu_sha_update,
     .finish = nu_sha_finish,
 };
-
 #endif
 
 /* CRC operation ------------------------------------------------------------*/
 #if defined(BSP_USING_CRC)
-
 static const struct hwcrypto_crc_ops nu_crc_ops =
 {
     .update = nu_crc_update,
 };
-
 #endif
 
-/* TRNG operation ------------------------------------------------------------*/
-#if defined(BSP_USING_TRNG)
-
-static const struct hwcrypto_rng_ops nu_rng_ops =
-{
-    .update = nu_trng_rand,
-};
-
-#elif defined(BSP_USING_CRYPTO)
-
-static const struct hwcrypto_rng_ops nu_rng_ops =
-{
-    .update = nu_prng_rand,
-};
-
+#if defined(RT_HWCRYPTO_USING_RNG)
+    /* RNG operation ------------------------------------------------------------*/
+    static struct hwcrypto_rng_ops nu_rng_ops;
 #endif
 
 /* Register crypto interface ----------------------------------------------------------*/
@@ -662,7 +621,7 @@ static rt_err_t nu_hwcrypto_create(struct rt_hwcrypto_ctx *ctx)
 
     switch (ctx->type & HWCRYPTO_MAIN_TYPE_MASK)
     {
-#if defined(BSP_USING_TRNG)
+#if defined(RT_HWCRYPTO_USING_RNG)
     case HWCRYPTO_TYPE_RNG:
     {
         ctx->contex = RT_NULL;
@@ -670,9 +629,9 @@ static rt_err_t nu_hwcrypto_create(struct rt_hwcrypto_ctx *ctx)
         ((struct hwcrypto_rng *)ctx)->ops = &nu_rng_ops;
         break;
     }
-#endif /* BSP_USING_TRNG */
+#endif /* RT_HWCRYPTO_USING_RNG */
 
-#if defined(BSP_USING_CRC)
+#if defined(BSP_USING_CRC) && defined(RT_HWCRYPTO_USING_CRC)
     case HWCRYPTO_TYPE_CRC:
     {
         ctx->contex = RT_NULL;
@@ -680,7 +639,7 @@ static rt_err_t nu_hwcrypto_create(struct rt_hwcrypto_ctx *ctx)
         ((struct hwcrypto_crc *)ctx)->ops = &nu_crc_ops;
         break;
     }
-#endif /* BSP_USING_CRC */
+#endif /* BSP_USING_CRC && defined(RT_HWCRYPTO_USING_CRC) */
 
 #if defined(BSP_USING_CRYPTO)
     case HWCRYPTO_TYPE_AES:
@@ -704,21 +663,6 @@ static rt_err_t nu_hwcrypto_create(struct rt_hwcrypto_ctx *ctx)
         ((struct hwcrypto_hash *)ctx)->ops = &nu_sha_ops;
         break;
     }
-
-#if !defined(BSP_USING_TRNG)
-    case HWCRYPTO_TYPE_RNG:
-    {
-        ctx->contex = RT_NULL;
-        ((struct hwcrypto_rng *)ctx)->ops = &nu_rng_ops;
-#if defined(NU_PRNG_USE_SEED)
-        nu_prng_open(NU_PRNG_SEED_VALUE);
-#else
-        nu_prng_open(rt_tick_get());
-#endif
-        break;
-    }
-#endif /* !BSP_USING_TRNG */
-
 #endif /* BSP_USING_CRYPTO */
 
     default:
@@ -758,17 +702,6 @@ static void nu_hwcrypto_reset(struct rt_hwcrypto_ctx *ctx)
 {
     switch (ctx->type & HWCRYPTO_MAIN_TYPE_MASK)
     {
-#if !defined(BSP_USING_TRNG)
-    case HWCRYPTO_TYPE_RNG:
-    {
-#if defined(NU_PRNG_USE_SEED)
-        nu_prng_open(NU_PRNG_SEED_VALUE);
-#else
-        nu_prng_open(rt_tick_get());
-#endif
-        break;
-    }
-#endif /* !BSP_USING_TRNG */
 #if defined(BSP_USING_CRYPTO)
     case HWCRYPTO_TYPE_SHA1:
     case HWCRYPTO_TYPE_SHA2:
@@ -794,15 +727,14 @@ static void nu_hwcrypto_reset(struct rt_hwcrypto_ctx *ctx)
         }
         break;
     }
-
 #endif
+
     default:
         break;
     }
 }
 
 /* Init and register nu_hwcrypto_dev */
-
 int nu_hwcrypto_device_init(void)
 {
     rt_err_t result;
@@ -820,8 +752,23 @@ int nu_hwcrypto_device_init(void)
     nu_crc_init();
 #endif
 
+#if defined(RT_HWCRYPTO_USING_RNG)
 #if defined(BSP_USING_TRNG)
-    nu_trng_init();
+    result = nu_trng_init();
+    if (result == RT_EOK)
+    {
+        LOG_I("TRNG is used as default RNG.");
+        nu_rng_ops.update = nu_trng_rand;
+    }
+    else
+#endif
+    {
+        result = nu_prng_init();
+        RT_ASSERT(result == RT_EOK);
+
+        LOG_I("PRNG is used as default RNG.");
+        nu_rng_ops.update = nu_prng_rand;
+    }
 #endif
 
     /* register hwcrypto operation */

bsp/nuvoton/libraries/m2354/rtt_port/drv_sdh.c

@@ -12,6 +12,10 @@
 
 #include <rtconfig.h>
 
+#define NU_SDH_HOTPLUG
+#define NU_SDH_MOUNT_ON_ROOT
+#undef BSP_USING_SDH
+
 #if defined(BSP_USING_SDH)
 
 #include <rtdevice.h>

bsp/nuvoton/libraries/m2354/rtt_port/drv_trng.c

@@ -7,6 +7,7 @@
 * Change Logs:
 * Date            Author           Notes
 * 2020-7-4        YCHuang12        First version
+* 2022-3-15       Wayne            Remove SW rand function
 *
 ******************************************************************************/
 
@@ -16,66 +17,34 @@
 
 #include <rtdevice.h>
 #include "NuMicro.h"
-#include <stdlib.h>
 
 #define NU_CRYPTO_TRNG_NAME "nu_TRNG"
 
-/* Private variables ------------------------------------------------------------*/
-static struct rt_mutex s_TRNG_mutex;
-static int s_i32TRNGEnable = 0;
-
-static rt_uint32_t nu_trng_run(void)
-{
-    uint32_t u32RNGValue;
-    rt_err_t result;
-
-    result = rt_mutex_take(&s_TRNG_mutex, RT_WAITING_FOREVER);
-    RT_ASSERT(result == RT_EOK);
-
-    RNG_Open();
-
-    if (RNG_Random(&u32RNGValue, 1) < 0)
-    {
-        //Failed, use software rand
-        u32RNGValue = rand();
-    }
-
-    result = rt_mutex_release(&s_TRNG_mutex);
-    RT_ASSERT(result == RT_EOK);
-
-    return u32RNGValue;
-}
+#define LOG_TAG         "TRNG"
+#define DBG_ENABLE
+#define DBG_SECTION_NAME "TRNG"
+#define DBG_LEVEL DBG_INFO
+#define DBG_COLOR
+#include <rtdbg.h>
 
+/* Private variables ------------------------------------------------------------*/
 rt_err_t nu_trng_init(void)
 {
-    rt_err_t result;
+    CLK_EnableModuleClock(TRNG_MODULE);
+    SYS_ResetModule(TRNG_RST);
 
-    result = rt_mutex_init(&s_TRNG_mutex, NU_CRYPTO_TRNG_NAME, RT_IPC_FLAG_PRIO);
-    RT_ASSERT(result == RT_EOK);
+    TRNG_Open();
 
-    s_i32TRNGEnable = 1;
-    SYS_ResetModule(TRNG_RST);
     return RT_EOK;
 }
 
-void nu_trng_open(void)
-{
-#if defined(NU_PRNG_USE_SEED)
-    srand(NU_PRNG_SEED_VALUE);
-#else
-    srand(rt_tick_get());
-#endif
-}
-
 rt_uint32_t nu_trng_rand(struct hwcrypto_rng *ctx)
 {
-    if (!s_i32TRNGEnable)
-    {
-        /* Use software rand */
-        return (rt_uint32_t)rand();
-    }
+    uint32_t u32RNGValue;
 
-    return nu_trng_run();
+    TRNG_GenWord(&u32RNGValue);
+
+    return u32RNGValue;
 }
 
 #endif //#if (defined(BSP_USING_TRNG) && defined(RT_HWCRYPTO_USING_RNG))

bsp/nuvoton/libraries/m480/Device/Nuvoton/M480/Include/sdh_reg.h

@@ -10,7 +10,7 @@
 #define __SDH_REG_H__
 
 #if defined ( __CC_ARM   )
-#pragma anon_unions
+    #pragma anon_unions
 #endif
 
 /**
@@ -355,7 +355,7 @@ typedef struct
     /// @endcond //HIDDEN_SYMBOLS
     __IO uint32_t GCTL;                  /*!< [0x0800] Global Control and Status Register                               */
     __IO uint32_t GINTEN;                /*!< [0x0804] Global Interrupt Control Register                                */
-    __I  uint32_t GINTSTS;               /*!< [0x0808] Global Interrupt Status Register                                 */
+    __IO uint32_t GINTSTS;               /*!< [0x0808] Global Interrupt Status Register                                 */
     /// @cond HIDDEN_SYMBOLS
     __I  uint32_t RESERVE3[5];
     /// @endcond //HIDDEN_SYMBOLS
@@ -534,7 +534,7 @@ typedef struct
 /**@}*/ /* end of REGISTER group */
 
 #if defined ( __CC_ARM   )
-#pragma no_anon_unions
+    #pragma no_anon_unions
 #endif
 
 #endif /* __SDH_REG_H__ */

bsp/nuvoton/libraries/m480/StdDriver/inc/nu_sdh.h

@@ -183,7 +183,7 @@ void SDH_Open(SDH_T *sdh, uint32_t u32CardDetSrc);
 uint32_t SDH_Probe(SDH_T *sdh);
 uint32_t SDH_Read(SDH_T *sdh, uint8_t *pu8BufAddr, uint32_t u32StartSec, uint32_t u32SecCount);
 uint32_t SDH_Write(SDH_T *sdh, uint8_t *pu8BufAddr, uint32_t u32StartSec, uint32_t u32SecCount);
-
+void SDH_Set_clock(SDH_T *sdh, uint32_t u32SDClockKhz);
 uint32_t SDH_CardDetection(SDH_T *sdh);
 void SDH_Open_Disk(SDH_T *sdh, uint32_t u32CardDetSrc);
 void SDH_Close_Disk(SDH_T *sdh);

bsp/nuvoton/libraries/m480/rtt_port/Kconfig

@@ -447,7 +447,7 @@ config SOC_SERIES_M480
     menuconfig BSP_USING_SDH
         bool "Enable Secure Digital Host Controller(SDH)"
         select RT_USING_DFS
-        select DFS_USING_POSIX
+        select RT_USING_SDIO
 
         if BSP_USING_SDH
             config BSP_USING_SDH0
@@ -455,18 +455,6 @@ config SOC_SERIES_M480
 
             config BSP_USING_SDH1
                 bool "Enable SDH1"
-
-            config NU_SDH_USING_PDMA
-                bool "Using PDMA"
-                select BSP_USING_PDMA
-
-            config NU_SDH_HOTPLUG
-                bool "Using HOTPLUG"
-                default y
-
-            config NU_SDH_MOUNT_ON_ROOT
-                bool "Mount on root"
-
         endif
 
     menuconfig BSP_USING_CAN

bsp/nuvoton/libraries/m480/rtt_port/drv_crypto.c

@@ -8,6 +8,7 @@
 * Date            Author         Notes
 * 2020-3-3        CHChen         First version
 * 2020-5-3        YCHuang12      Add TDES and SHA
+* 2022-4-17       Wayne          Fix TRNG and PRNG selection
 *
 ******************************************************************************/
 
@@ -16,7 +17,6 @@
 #if ((defined(BSP_USING_CRYPTO) || defined(BSP_USING_TRNG) || defined(BSP_USING_CRC)) && defined(RT_USING_HWCRYPTO))
 
 #include <rtdevice.h>
-#include <rtdbg.h>
 #include <board.h>
 #include "NuMicro.h"
 #include <nu_bitutil.h>
@@ -30,6 +30,13 @@
 #endif
 
 /* Private typedef --------------------------------------------------------------*/
+#define LOG_TAG         "CRYPTO"
+#define DBG_ENABLE
+#define DBG_SECTION_NAME "CRYPTO"
+#define DBG_LEVEL DBG_INFO
+#define DBG_COLOR
+#include <rtdbg.h>
+
 typedef struct
 {
     uint8_t *pu8SHATempBuf;
@@ -61,18 +68,12 @@ static const struct rt_hwcrypto_ops nu_hwcrypto_ops =
 #define NU_HWCRYPTO_AES_NAME    "nu_AES"
 #define NU_HWCRYPTO_TDES_NAME   "nu_TDES"
 #define NU_HWCRYPTO_SHA_NAME    "nu_SHA"
-#if !defined(BSP_USING_TRNG)
-    #define NU_HWCRYPTO_PRNG_NAME   "nu_PRNG"
-#endif
+#define NU_HWCRYPTO_PRNG_NAME   "nu_PRNG"
 
 static struct rt_mutex s_AES_mutex;
 static struct rt_mutex s_TDES_mutex;
 static struct rt_mutex s_SHA_mutex;
 
-#if !defined(BSP_USING_TRNG)
-    static struct rt_mutex s_PRNG_mutex;
-#endif
-
 static rt_err_t nu_crypto_init(void)
 {
     rt_err_t result = RT_EOK;
@@ -96,12 +97,6 @@ static rt_err_t nu_crypto_init(void)
     SHA_ENABLE_INT(CRPT);
 #endif
 
-#if defined(RT_HWCRYPTO_USING_RNG) && !defined(BSP_USING_TRNG)
-    result = rt_mutex_init(&s_PRNG_mutex, NU_HWCRYPTO_PRNG_NAME, RT_IPC_FLAG_PRIO);
-    RT_ASSERT(result == RT_EOK);
-    PRNG_ENABLE_INT(CRPT);
-#endif
-
     return result;
 }
 
@@ -174,46 +169,33 @@ static rt_err_t nu_aes_crypt_run(
     return RT_EOK;
 }
 
-#if !defined(BSP_USING_TRNG)
-//Using PRNG instead of TRNG
-static void nu_prng_open(uint32_t u32Seed)
+static rt_err_t nu_prng_init(void)
 {
-    rt_err_t result;
+    uint32_t u32Seed;
 
-    result = rt_mutex_take(&s_PRNG_mutex, RT_WAITING_FOREVER);
-    RT_ASSERT(result == RT_EOK);
+#if defined(NU_PRNG_USE_SEED)
+    u32Seed = NU_PRNG_SEED_VALUE;
+#else
+    u32Seed = (uint32_t)rt_tick_get();
+#endif
 
-    //Open PRNG 64 bits.
-    PRNG_Open(CRPT, PRNG_KEY_SIZE_64, PRNG_SEED_RELOAD, u32Seed);
+    //Open PRNG 128 bits.
+    PRNG_Open(CRPT, PRNG_KEY_SIZE_128, PRNG_SEED_RELOAD, u32Seed);
 
-    result = rt_mutex_release(&s_PRNG_mutex);
-    RT_ASSERT(result == RT_EOK);
+    return RT_EOK;
 }
 
-static rt_uint32_t nu_prng_run(void)
+static rt_uint32_t nu_prng_rand(struct hwcrypto_rng *ctx)
 {
-    uint32_t au32RNGValue[2];
-    rt_err_t result;
-
-    result = rt_mutex_take(&s_PRNG_mutex, RT_WAITING_FOREVER);
-    RT_ASSERT(result == RT_EOK);
+    uint32_t au32RNGValue[4];
 
     PRNG_Start(CRPT);
-    while ((CRPT->PRNG_CTL & CRPT_PRNG_CTL_BUSY_Msk)) {};
-
-    /* Clear PRNG interrupt status */
-    PRNG_CLR_INT_FLAG(CRPT);
 
     PRNG_Read(CRPT, &au32RNGValue[0]);
 
-    result = rt_mutex_release(&s_PRNG_mutex);
-    RT_ASSERT(result == RT_EOK);
-
-    return au32RNGValue[0] ^ au32RNGValue[1];
+    return au32RNGValue[0] ^ au32RNGValue[1] ^ au32RNGValue[2] ^ au32RNGValue[3];
 }
 
-#endif
-
 static rt_err_t nu_aes_crypt(struct hwcrypto_symmetric *symmetric_ctx, struct hwcrypto_symmetric_info *symmetric_info)
 {
     uint32_t u32AESOpMode;
@@ -783,14 +765,6 @@ static rt_err_t nu_sha_finish(struct hwcrypto_hash *hash_ctx, rt_uint8_t *out, r
     return RT_EOK;
 }
 
-#if !defined(BSP_USING_TRNG)
-static rt_uint32_t nu_prng_rand(struct hwcrypto_rng *ctx)
-{
-    return nu_prng_run();
-}
-
-#endif
-
 static const struct hwcrypto_symmetric_ops nu_aes_ops =
 {
     .crypt = nu_aes_crypt,
@@ -806,34 +780,19 @@ static const struct hwcrypto_hash_ops nu_sha_ops =
     .update = nu_sha_update,
     .finish = nu_sha_finish,
 };
-
 #endif
 
 /* CRC operation ------------------------------------------------------------*/
 #if defined(BSP_USING_CRC)
-
 static const struct hwcrypto_crc_ops nu_crc_ops =
 {
     .update = nu_crc_update,
 };
-
 #endif
 
-/* TRNG operation ------------------------------------------------------------*/
-#if defined(BSP_USING_TRNG)
-
-static const struct hwcrypto_rng_ops nu_rng_ops =
-{
-    .update = nu_trng_rand,
-};
-
-#elif defined(BSP_USING_CRYPTO)
-
-static const struct hwcrypto_rng_ops nu_rng_ops =
-{
-    .update = nu_prng_rand,
-};
-
+#if defined(RT_HWCRYPTO_USING_RNG)
+    /* RNG operation ------------------------------------------------------------*/
+    static struct hwcrypto_rng_ops nu_rng_ops;
 #endif
 
 /* Register crypto interface ----------------------------------------------------------*/
@@ -844,7 +803,7 @@ static rt_err_t nu_hwcrypto_create(struct rt_hwcrypto_ctx *ctx)
 
     switch (ctx->type & HWCRYPTO_MAIN_TYPE_MASK)
     {
-#if defined(BSP_USING_TRNG)
+#if defined(RT_HWCRYPTO_USING_RNG)
     case HWCRYPTO_TYPE_RNG:
     {
         ctx->contex = RT_NULL;
@@ -852,9 +811,9 @@ static rt_err_t nu_hwcrypto_create(struct rt_hwcrypto_ctx *ctx)
         ((struct hwcrypto_rng *)ctx)->ops = &nu_rng_ops;
         break;
     }
-#endif /* BSP_USING_TRNG */
+#endif /* RT_HWCRYPTO_USING_RNG */
 
-#if defined(BSP_USING_CRC)
+#if defined(BSP_USING_CRC) && defined(RT_HWCRYPTO_USING_CRC)
     case HWCRYPTO_TYPE_CRC:
     {
         ctx->contex = RT_NULL;
@@ -862,7 +821,7 @@ static rt_err_t nu_hwcrypto_create(struct rt_hwcrypto_ctx *ctx)
         ((struct hwcrypto_crc *)ctx)->ops = &nu_crc_ops;
         break;
     }
-#endif /* BSP_USING_CRC */
+#endif /* BSP_USING_CRC && defined(RT_HWCRYPTO_USING_CRC) */
 
 #if defined(BSP_USING_CRYPTO)
     case HWCRYPTO_TYPE_AES:
@@ -896,21 +855,6 @@ static rt_err_t nu_hwcrypto_create(struct rt_hwcrypto_ctx *ctx)
         ((struct hwcrypto_hash *)ctx)->ops = &nu_sha_ops;
         break;
     }
-
-#if !defined(BSP_USING_TRNG)
-    case HWCRYPTO_TYPE_RNG:
-    {
-        ctx->contex = RT_NULL;
-        ((struct hwcrypto_rng *)ctx)->ops = &nu_rng_ops;
-#if defined(NU_PRNG_USE_SEED)
-        nu_prng_open(NU_PRNG_SEED_VALUE);
-#else
-        nu_prng_open(rt_tick_get());
-#endif
-        break;
-    }
-#endif /* !BSP_USING_TRNG */
-
 #endif /* BSP_USING_CRYPTO */
 
     default:
@@ -950,17 +894,6 @@ static void nu_hwcrypto_reset(struct rt_hwcrypto_ctx *ctx)
 {
     switch (ctx->type & HWCRYPTO_MAIN_TYPE_MASK)
     {
-#if !defined(BSP_USING_TRNG)
-    case HWCRYPTO_TYPE_RNG:
-    {
-#if defined(NU_PRNG_USE_SEED)
-        nu_prng_open(NU_PRNG_SEED_VALUE);
-#else
-        nu_prng_open(rt_tick_get());
-#endif
-        break;
-    }
-#endif /* !BSP_USING_TRNG */
 #if defined(BSP_USING_CRYPTO)
     case HWCRYPTO_TYPE_SHA1:
     case HWCRYPTO_TYPE_SHA2:
@@ -986,15 +919,14 @@ static void nu_hwcrypto_reset(struct rt_hwcrypto_ctx *ctx)
         }
         break;
     }
-
 #endif
+
     default:
         break;
     }
 }
 
 /* Init and register nu_hwcrypto_dev */
-
 int nu_hwcrypto_device_init(void)
 {
     rt_err_t result;
@@ -1012,8 +944,23 @@ int nu_hwcrypto_device_init(void)
     nu_crc_init();
 #endif
 
+#if defined(RT_HWCRYPTO_USING_RNG)
 #if defined(BSP_USING_TRNG)
-    nu_trng_init();
+    result = nu_trng_init();
+    if (result == RT_EOK)
+    {
+        LOG_I("TRNG is used as default RNG.");
+        nu_rng_ops.update = nu_trng_rand;
+    }
+    else
+#endif
+    {
+        result = nu_prng_init();
+        RT_ASSERT(result == RT_EOK);
+
+        LOG_I("PRNG is used as default RNG.");
+        nu_rng_ops.update = nu_prng_rand;
+    }
 #endif
 
     /* register hwcrypto operation */

bsp/nuvoton/libraries/m480/rtt_port/drv_sdh.c

@@ -12,6 +12,10 @@
 
 #include <rtconfig.h>
 
+#define NU_SDH_HOTPLUG
+#define NU_SDH_MOUNT_ON_ROOT
+#undef BSP_USING_SDH
+
 #if defined(BSP_USING_SDH)
 
 #include <rtdevice.h>

bsp/nuvoton/libraries/m480/rtt_port/drv_trng.c

@@ -7,6 +7,7 @@
 * Change Logs:
 * Date            Author           Notes
 * 2020-3-4        CHChen           First version
+* 2022-3-15       Wayne            Remove SW rand function
 *
 ******************************************************************************/
 
@@ -16,72 +17,40 @@
 
 #include <rtdevice.h>
 #include "NuMicro.h"
-#include <stdlib.h>
 
 #define NU_CRYPTO_TRNG_NAME "nu_TRNG"
 
-/* Private variables ------------------------------------------------------------*/
-static struct rt_mutex s_TRNG_mutex;
-static int s_i32TRNGEnable = 0;
-
-static rt_uint32_t nu_trng_run(void)
-{
-    uint32_t u32RNGValue;
-    rt_err_t result;
-
-    result = rt_mutex_take(&s_TRNG_mutex, RT_WAITING_FOREVER);
-    RT_ASSERT(result == RT_EOK);
-
-    TRNG_Open();
-
-    if (TRNG_GenWord(&u32RNGValue) < 0)
-    {
-        //Failed, use software rand
-        u32RNGValue = rand();
-    }
-
-    result = rt_mutex_release(&s_TRNG_mutex);
-    RT_ASSERT(result == RT_EOK);
-
-    return u32RNGValue;
-}
+#define LOG_TAG         "TRNG"
+#define DBG_ENABLE
+#define DBG_SECTION_NAME "TRNG"
+#define DBG_LEVEL DBG_INFO
+#define DBG_COLOR
+#include <rtdbg.h>
 
+/* Private variables ------------------------------------------------------------*/
 rt_err_t nu_trng_init(void)
 {
-    rt_err_t result;
-
-    result = rt_mutex_init(&s_TRNG_mutex, NU_CRYPTO_TRNG_NAME, RT_IPC_FLAG_PRIO);
-    RT_ASSERT(result == RT_EOK);
-
     if ((SYS->CSERVER & SYS_CSERVER_VERSION_Msk) == 0x0)
     {
-        rt_kprintf("This chip does not support TRNG!\n");
+        LOG_E("This chip does not support TRNG!");
         return -RT_ERROR;
     }
 
-    s_i32TRNGEnable = 1;
+    CLK_EnableModuleClock(TRNG_MODULE);
     SYS_ResetModule(TRNG_RST);
-    return RT_EOK;
-}
 
-void nu_trng_open(void)
-{
-#if defined(NU_PRNG_USE_SEED)
-    srand(NU_PRNG_SEED_VALUE);
-#else
-    srand(rt_tick_get());
-#endif
+    TRNG_Open();
+
+    return RT_EOK;
 }
 
 rt_uint32_t nu_trng_rand(struct hwcrypto_rng *ctx)
 {
-    if (!s_i32TRNGEnable)
-    {
-        /* Use software rand */
-        return (rt_uint32_t)rand();
-    }
+    uint32_t u32RNGValue;
+
+    TRNG_GenWord(&u32RNGValue);
 
-    return nu_trng_run();
+    return u32RNGValue;
 }
 
 #endif //#if (defined(BSP_USING_TRNG) && defined(RT_HWCRYPTO_USING_RNG))

bsp/nuvoton/libraries/n9h30/Driver/Include/nu_fmi.h

@@ -24,6 +24,85 @@
   @{
 */
 
+
+#ifdef __cplusplus
+    #define   __I     volatile             /*!< Defines 'read only' permissions                 */
+#else
+    #define   __I     volatile const       /*!< Defines 'read only' permissions                 */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions                */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions              */
+
+typedef struct
+{
+    __IO uint32_t FB[32];                /*!< Shared Buffer (FIFO)                                                      */
+    /// @cond HIDDEN_SYMBOLS
+    __I  uint32_t RESERVE0[224];
+    /// @endcond //HIDDEN_SYMBOLS
+    __IO uint32_t DMACTL;                /*!< [0x0400] DMA Control and Status Register                                  */
+    /// @cond HIDDEN_SYMBOLS
+    __I  uint32_t RESERVE1[1];
+    /// @endcond //HIDDEN_SYMBOLS
+    __IO uint32_t DMASA;                 /*!< [0x0408] DMA Transfer Starting Address Register                           */
+    __I  uint32_t DMABCNT;               /*!< [0x040c] DMA Transfer Byte Count Register                                 */
+    __IO uint32_t DMAINTEN;              /*!< [0x0410] DMA Interrupt Enable Control Register                            */
+    __IO uint32_t DMAINTSTS;             /*!< [0x0414] DMA Interrupt Status Register                                    */
+    /// @cond HIDDEN_SYMBOLS
+    __I  uint32_t RESERVE2[250];
+    /// @endcond //HIDDEN_SYMBOLS
+    __IO uint32_t GCTL;                  /*!< [0x0800] Global Control and Status Register                               */
+    __IO uint32_t GINTEN;                /*!< [0x0804] Global Interrupt Control Register                                */
+    __I  uint32_t GINTSTS;               /*!< [0x0808] Global Interrupt Status Register                                 */
+    /// @cond HIDDEN_SYMBOLS
+    __I  uint32_t RESERVE3[5];
+    /// @endcond //HIDDEN_SYMBOLS
+    __IO uint32_t CTL;                   /*!< [0x0820] SD Control and Status Register                                   */
+    __IO uint32_t CMDARG;                /*!< [0x0824] SD Command Argument Register                                     */
+    __IO uint32_t INTEN;                 /*!< [0x0828] SD Interrupt Control Register                                    */
+    __IO uint32_t INTSTS;                /*!< [0x082c] SD Interrupt Status Register                                     */
+    __I  uint32_t RESP0;                 /*!< [0x0830] SD Receiving Response Token Register 0                           */
+    __I  uint32_t RESP1;                 /*!< [0x0834] SD Receiving Response Token Register 1                           */
+    __IO uint32_t BLEN;                  /*!< [0x0838] SD Block Length Register                                         */
+    __IO uint32_t TOUT;                  /*!< [0x083c] SD Response/Data-in Time-out Register                            */
+    __IO uint32_t ECTL;                  /*!< [0x0840] SD Host Extend Control Register                                  */
+
+    /// @cond HIDDEN_SYMBOLS
+    __I  uint32_t RESERVE4[24];
+    /// @endcond //HIDDEN_SYMBOLS
+    __IO uint32_t NANDCTL;               /*!< [0x08A0] NAND Flash Control Register                                      */
+    __IO uint32_t NANDTMCTL;             /*!< [0x08A4] NAND Flash Timing Control Register                               */
+    __IO uint32_t NANDINTEN;             /*!< [0x08A8] NAND Flash Interrupt Enable Register                             */
+    __IO uint32_t NANDINTSTS;            /*!< [0x08AC] NAND Flash Interrupt Status Register                             */
+    __O  uint32_t NANDCMD;               /*!< [0x08B0] NAND Flash Command Port Registe                                  */
+    __O  uint32_t NANDADDR;              /*!< [0x08B4] NAND Flash Address Port Register                                 */
+    __IO uint32_t NANDDATA;              /*!< [0x08B8] NAND Flash Data Port Registe                                     */
+    __IO uint32_t NANDRACTL;             /*!< [0x08BC] NAND Flash Redundant Area Control Register                       */
+    __IO uint32_t NANDECTL;              /*!< [0x08C0] NAND Flash Extend Control Register                               */
+    __I  uint32_t NANDECCES[4];          /*!< [0x08D0] NAND Flash ECC Error Status Register                             */
+    __IO uint32_t NANDPROTA[2];          /*!< [0x08E0] NAND Flash Protect Region End Address Register                   */
+
+    /// @cond HIDDEN_SYMBOLS
+    __I  uint32_t RESERVE5[6];
+    /// @endcond //HIDDEN_SYMBOLS
+
+    __I  uint32_t NANDECCEA[12];         /*!< [0x0900] NAND Flash ECC Error Byte Address n Register                     */
+
+    /// @cond HIDDEN_SYMBOLS
+    __I  uint32_t RESERVE6[12];
+    /// @endcond //HIDDEN_SYMBOLS
+
+   __I  uint32_t NANDECCED[6];           /*!< [0x0960] NAND Flash ECC Error Data Register N                             */
+
+    /// @cond HIDDEN_SYMBOLS
+    __I  uint32_t RESERVE7[34];
+    /// @endcond //HIDDEN_SYMBOLS
+
+    __IO uint32_t NANDRA[118];           /*!< [0x0A00]NAND Flash Redundant Area Word n = 0, 1..117                      */
+
+} FMI_T;
+
+#define FMI0                  ((FMI_T *)   FMI_BA)
+
 /**
     @addtogroup FMI_CONST FMI Bit Field Definition
     Constant Definitions for FMI Controller

bsp/nuvoton/libraries/n9h30/Driver/Include/nu_sdh.h

@@ -375,8 +375,8 @@ typedef struct
     __I  uint32_t RESP1;                 /*!< [0x0834] SD Receiving Response Token Register 1                           */
     __IO uint32_t BLEN;                  /*!< [0x0838] SD Block Length Register                                         */
     __IO uint32_t TOUT;                  /*!< [0x083c] SD Response/Data-in Time-out Register                            */
-
     __IO uint32_t ECTL;                  /*!< [0x0840] SD Host Extend Control Register                                  */
+
 } SDH_T;
 
 

bsp/nuvoton/libraries/n9h30/rtt_port/Kconfig

@@ -180,6 +180,11 @@ config SOC_SERIES_N9H30
 
     endif
 
+    config BSP_USING_FMINAND
+        bool "Enable FMI NAND Controller"
+        select RT_USING_MTD_NAND
+        default y
+
     menuconfig BSP_USING_TMR
         bool "Enable Timer Controller(TIMER)"
 

bsp/nuvoton/libraries/n9h30/rtt_port/SConscript

@@ -1,14 +1,21 @@
 # RT-Thread building script for component
 
+import os
 Import('RTT_ROOT')
 from building import *
 
-cwd     = GetCurrentDir()
+cwd = GetCurrentDir()
+objs = []
+list = os.listdir(cwd)
 src = Glob('*.c') + Glob('*.cpp')
 CPPPATH = [cwd]
-group = []
-
-# USB driver constrain
 group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
 
-Return('group')
+for d in list:
+    path = os.path.join(cwd, d)
+    if os.path.isfile(os.path.join(path, 'SConscript')):
+        objs = objs + SConscript(os.path.join(d, 'SConscript'))
+
+objs += group
+
+Return('objs')

bsp/nuvoton/libraries/n9h30/rtt_port/drv_sys.c

@@ -74,8 +74,9 @@ void rt_hw_interrupt_init(void)
 {
     int i;
 
-    *((volatile unsigned int *)REG_AIC_ISR)  = 0xFFFFFFFF;   // disable all interrupt channel
-    *((volatile unsigned int *)REG_AIC_ISRH) = 0xFFFFFFFF;   // disable all interrupt channel
+    outpw(REG_AIC_ISR, 0xFFFFFFFF);  // disable all interrupt channel
+    outpw(REG_AIC_ISRH, 0xFFFFFFFF); // disable all interrupt channel
+    outpw(REG_AIC_EOSCR, 1);
 
     /* init interrupt nest, and context in thread sp */
     rt_interrupt_nest               = 0;

bsp/nuvoton/libraries/nu_packages/Kconfig

@@ -7,6 +7,10 @@ menu "Nuvoton Packages Config"
         bool "Enable demos"
         default y
 
+    config NU_PKG_USING_LVGL
+        bool "Enable LVGL demos"
+        default n
+
     config NU_PKG_USING_BMX055
         bool "BMX055 9-axis sensor."
         select RT_USING_I2C
@@ -136,6 +140,48 @@ menu "Nuvoton Packages Config"
 
         endif
 
+    config NU_PKG_USING_FSA506
+        bool "FSA506 LCD Panel"
+        select BSP_USING_GPIO
+        default n
+
+        if NU_PKG_USING_FSA506
+
+            choice
+                prompt "Select FSA506 interface"
+
+                config NU_PKG_USING_FSA506_EBI
+                    select BSP_USING_EBI
+                    bool "FSA506_EBI"
+                help
+                    Choose this option if you the FSA506 device is with EBI interface.
+            endchoice
+
+            config NU_PKG_FSA506_WITH_OFFSCREEN_FRAMEBUFFER
+                bool "Create an offscreen framebuffer."
+                default n
+
+            if NU_PKG_FSA506_WITH_OFFSCREEN_FRAMEBUFFER
+                config NU_PKG_FSA506_LINE_BUFFER_NUMBER
+                    int "Allocate Line buffer number."
+                    range 16 272
+                    default  272
+            endif
+
+            config BSP_LCD_BPP
+                int
+                default 16     if NU_PKG_USING_FSA506
+
+            config BSP_LCD_WIDTH
+                int
+                default 480    if NU_PKG_USING_FSA506
+
+            config BSP_LCD_HEIGHT
+                int
+                default 272    if NU_PKG_USING_FSA506
+
+        endif
+
     config NU_PKG_USING_TPC
         bool "Support Touch Panel Controller over I2C"
         select RT_USING_TOUCH
@@ -152,7 +198,21 @@ menu "Nuvoton Packages Config"
             config NU_PKG_USING_TPC_GT911
                 bool "GT911 TPC"
                 default n
+
+            config NU_PKG_USING_TPC_FT5446
+                bool "FT5446 TPC"
+                default n
+
+            config NU_PKG_USING_TPC_ST1663I
+                bool "ST1663I TPC"
+                default n
+
         endchoice
+
+        config NU_PKG_TPC_REVERSE_XY
+            bool "Reverse X-Y coordinate"
+            default n
+
     endif
 
     config NU_PKG_USING_ADC_TOUCH

bsp/nuvoton/libraries/nu_packages/NuUtils/inc/nu_bitutil.h

@@ -14,17 +14,15 @@
 
 #if defined(__ICCARM__)
     #include <arm_math.h>
-#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)       /* ARM Compiler 6 */
+#elif defined (__ARMCC_VERSION)
     #ifdef __has_include
-        #if __has_include("cmsis_armclang.h")
-            #include "cmsis_armclang.h"
+        #if __has_include("cmsis_compiler.h")
+            #include "cmsis_compiler.h"
         #endif
     #endif
-#elif defined(__ARMCC_VERSION)
-    #ifdef __has_include
-        #if __has_include("cmsis_armcc.h")
-            #include "cmsis_armcc.h"
-        #endif
+
+    #if !defined(__CLZ)
+        #define __CLZ     __clz
     #endif
 #endif
 

bsp/nuvoton/libraries/nu_packages/TPC/SConscript

@@ -11,6 +11,10 @@ if GetDepend('NU_PKG_USING_TPC_ILI'):
     src += Glob('ili.c')
 elif GetDepend('NU_PKG_USING_TPC_GT911'):
     src += Glob('gt911.c')
+elif GetDepend('NU_PKG_USING_TPC_FT5446'):
+    src += Glob('ft5446.c')
+elif GetDepend('NU_PKG_USING_TPC_ST1663I'):
+    src += Glob('st1663i.c')
 else:
     src = []
 

bsp/nuvoton/libraries/nu_packages/TPC/gt911.c

@@ -12,12 +12,11 @@
 #include <rtthread.h>
 #include <rtdevice.h>
 
-#include <string.h>
-
 #define DBG_TAG "gt911"
 #define DBG_LVL DBG_INFO
 #include <rtdbg.h>
 
+#include "touch.h"
 #include "gt911.h"
 
 static struct rt_i2c_client gt911_client;
@@ -113,7 +112,7 @@ static rt_err_t gt911_get_info(struct rt_i2c_client *dev, struct rt_touch_info *
     reg[0] = (rt_uint8_t)(GT911_CONFIG_REG >> 8);
     reg[1] = (rt_uint8_t)(GT911_CONFIG_REG & 0xFF);
 
-    if(gt911_read_regs(dev, reg, out_info, out_len) != RT_EOK)
+    if (gt911_read_regs(dev, reg, out_info, out_len) != RT_EOK)
     {
         LOG_E("read info failed");
         return -RT_ERROR;
@@ -134,7 +133,7 @@ static rt_err_t gt911_soft_reset(struct rt_i2c_client *dev)
     buf[1] = (rt_uint8_t)(GT911_COMMAND_REG & 0xFF);
     buf[2] = 0x02;
 
-    if(gt911_write_reg(dev, buf, 3) != RT_EOK)
+    if (gt911_write_reg(dev, buf, 3) != RT_EOK)
     {
         LOG_E("soft reset failed");
         return -RT_ERROR;
@@ -142,16 +141,16 @@ static rt_err_t gt911_soft_reset(struct rt_i2c_client *dev)
     return RT_EOK;
 }
 
-static rt_int16_t pre_x[GT911_MAX_TOUCH] = {-1, -1, -1, -1, -1};
-static rt_int16_t pre_y[GT911_MAX_TOUCH] = {-1, -1, -1, -1, -1};
-static rt_int16_t pre_w[GT911_MAX_TOUCH] = {-1, -1, -1, -1, -1};
+static rt_int16_t pre_x[GT911_MAX_TOUCH];
+static rt_int16_t pre_y[GT911_MAX_TOUCH];
+static rt_int16_t pre_w[GT911_MAX_TOUCH];
 static rt_uint8_t s_tp_dowm[GT911_MAX_TOUCH];
 
 static void gt911_touch_up(void *buf, rt_int8_t id)
 {
     struct rt_touch_data *read_data = (struct rt_touch_data *)buf;
 
-    if(s_tp_dowm[id] == 1)
+    if (s_tp_dowm[id] == 1)
     {
         s_tp_dowm[id] = 0;
         read_data[id].event = RT_TOUCH_EVENT_UP;
@@ -198,6 +197,9 @@ static void gt911_touch_down(void *buf, rt_int8_t id, rt_int16_t x, rt_int16_t y
     pre_w[id] = w;
 }
 
+static rt_int8_t pre_id[GT911_MAX_TOUCH];
+static rt_uint8_t pre_touch = 0;
+
 static rt_size_t gt911_read_point(struct rt_touch_device *touch, void *buf, rt_size_t read_num)
 {
     rt_uint8_t point_status = 0;
@@ -205,15 +207,12 @@ static rt_size_t gt911_read_point(struct rt_touch_device *touch, void *buf, rt_s
     rt_uint8_t write_buf[3];
     rt_uint8_t cmd[2];
     rt_uint8_t read_buf[8 * GT911_MAX_TOUCH] = {0};
-    rt_uint8_t read_index;
+    rt_uint8_t i;
     rt_int8_t read_id = 0;
     rt_int16_t input_x = 0;
     rt_int16_t input_y = 0;
     rt_int16_t input_w = 0;
 
-    static rt_uint8_t pre_touch = 0;
-    static rt_int8_t pre_id[GT911_MAX_TOUCH] = {0};
-
     /* point status register */
     cmd[0] = (rt_uint8_t)((GT911_READ_STATUS >> 8) & 0xFF);
     cmd[1] = (rt_uint8_t)(GT911_READ_STATUS & 0xFF);
@@ -249,16 +248,16 @@ static rt_size_t gt911_read_point(struct rt_touch_device *touch, void *buf, rt_s
     cmd[1] = (rt_uint8_t)(GT911_POINT1_REG & 0xFF);
 
     /* read point num is touch_num */
-    if(gt911_read_regs(&gt911_client, cmd, read_buf, read_num * GT911_POINT_INFO_NUM) !=RT_EOK)
+    if (gt911_read_regs(&gt911_client, cmd, read_buf, read_num * GT911_POINT_INFO_NUM) != RT_EOK)
     {
         LOG_D("read point failed\n");
         read_num = 0;
         goto exit_;
     }
 
-    if(pre_touch > touch_num)                                       /* point up */
+    if (pre_touch > touch_num)                                       /* point up */
     {
-        for (read_index = 0; read_index < pre_touch; read_index++)
+        for (i = 0; i < GT911_MAX_TOUCH; i++)
         {
             rt_uint8_t j;
 
@@ -266,42 +265,35 @@ static rt_size_t gt911_read_point(struct rt_touch_device *touch, void *buf, rt_s
             {
                 read_id = read_buf[j * 8] & 0x0F;
 
-                if (pre_id[read_index] == read_id)                   /* this id is not free */
+                if (pre_id[i] == read_id)                   /* this id is not free */
                     break;
 
-                if (j >= touch_num - 1)
-                {
-                    rt_uint8_t up_id;
-                    up_id = pre_id[read_index];
-                    gt911_touch_up(buf, up_id);
-                }
+            }
+            if ((j == touch_num) && (pre_id[i] != -1))           /* free this node */
+            {
+                gt911_touch_up(buf, pre_id[i]);
+                pre_id[i] = -1;
             }
         }
     }
 
-    if(touch_num)                                                 /* point down */
+    if (touch_num > 0)                                                 /* point down */
     {
         rt_uint8_t off_set;
 
-        for(read_index = 0; read_index < touch_num; read_index++)
+        for (i = 0; i < touch_num; i++)
         {
-            off_set = read_index * 8;
+            off_set = i * 8;
             read_id = read_buf[off_set] & 0x0f;
-            pre_id[read_index] = read_id;
-            input_x = read_buf[off_set + 1] | (read_buf[off_set + 2] << 8);	/* x */
-            input_y = read_buf[off_set + 3] | (read_buf[off_set + 4] << 8);	/* y */
-            input_w = read_buf[off_set + 5] | (read_buf[off_set + 6] << 8);	/* size */
+            pre_id[i] = read_id;
+
+            input_x = read_buf[off_set + 1] | (read_buf[off_set + 2] << 8); /* x */
+            input_y = read_buf[off_set + 3] | (read_buf[off_set + 4] << 8); /* y */
+            input_w = read_buf[off_set + 5] | (read_buf[off_set + 6] << 8); /* size */
 
             gt911_touch_down(buf, read_id, input_x, input_y, input_w);
         }
     }
-    else if (pre_touch)
-    {
-        for(read_index = 0; read_index < pre_touch; read_index++)
-        {
-            gt911_touch_up(buf, pre_id[read_index]);
-        }
-    }
 
     pre_touch = touch_num;
 
@@ -331,7 +323,7 @@ static rt_err_t gt911_control(struct rt_touch_device *touch, int cmd, void *arg)
     rt_uint8_t *config;
 
     config = (rt_uint8_t *)rt_calloc(1, sizeof(GT911_CFG_TBL) + GT911_REGITER_LEN);
-    if(config == RT_NULL)
+    if (config == RT_NULL)
     {
         LOG_D("malloc config memory failed\n");
         return -RT_ERROR;
@@ -340,65 +332,65 @@ static rt_err_t gt911_control(struct rt_touch_device *touch, int cmd, void *arg)
     config[0] = (rt_uint8_t)((GT911_CONFIG_REG >> 8) & 0xFF);
     config[1] = (rt_uint8_t)(GT911_CONFIG_REG & 0xFF);
 
-    memcpy(&config[2], GT911_CFG_TBL, sizeof(GT911_CFG_TBL));
+    rt_memcpy(&config[2], GT911_CFG_TBL, sizeof(GT911_CFG_TBL));
 
-    switch(cmd)
+    switch (cmd)
     {
-        case RT_TOUCH_CTRL_SET_X_RANGE:
-        {
-            rt_uint16_t x_range;
+    case RT_TOUCH_CTRL_SET_X_RANGE:
+    {
+        rt_uint16_t x_range;
 
-            x_range = *(rt_uint16_t *)arg;
-            config[4] = (rt_uint8_t)(x_range >> 8);
-            config[3] = (rt_uint8_t)(x_range & 0xff);
+        x_range = *(rt_uint16_t *)arg;
+        config[4] = (rt_uint8_t)(x_range >> 8);
+        config[3] = (rt_uint8_t)(x_range & 0xff);
 
-            GT911_CFG_TBL[2] = config[4];
-            GT911_CFG_TBL[1] = config[3];
-            break;
-        }
-        case RT_TOUCH_CTRL_SET_Y_RANGE:
-        {
-            rt_uint16_t y_range;
+        GT911_CFG_TBL[2] = config[4];
+        GT911_CFG_TBL[1] = config[3];
+        break;
+    }
+    case RT_TOUCH_CTRL_SET_Y_RANGE:
+    {
+        rt_uint16_t y_range;
 
-            y_range = *(rt_uint16_t *)arg;
-            config[6] = (rt_uint8_t)(y_range >> 8);
-            config[5] = (rt_uint8_t)(y_range & 0xff);
+        y_range = *(rt_uint16_t *)arg;
+        config[6] = (rt_uint8_t)(y_range >> 8);
+        config[5] = (rt_uint8_t)(y_range & 0xff);
 
-            GT911_CFG_TBL[4] = config[6];
-            GT911_CFG_TBL[3] = config[5];
-            break;
-        }
-        case RT_TOUCH_CTRL_SET_X_TO_Y:
+        GT911_CFG_TBL[4] = config[6];
+        GT911_CFG_TBL[3] = config[5];
+        break;
+    }
+    case RT_TOUCH_CTRL_SET_X_TO_Y:
+    {
+        config[8] ^= (1 << 3);
+        break;
+    }
+    case RT_TOUCH_CTRL_SET_MODE:
+    {
+        rt_uint16_t trig_type;
+        trig_type = *(rt_uint16_t *)arg;
+
+        switch (trig_type)
         {
-            config[8] ^= (1 << 3);
+        case RT_DEVICE_FLAG_INT_RX:
+            config[8] &= 0xFC;
             break;
-        }
-        case RT_TOUCH_CTRL_SET_MODE:
-        {
-            rt_uint16_t trig_type;
-            trig_type = *(rt_uint16_t *)arg;
-
-            switch (trig_type)
-            {
-            case RT_DEVICE_FLAG_INT_RX:
-                config[8] &= 0xFC;
-                break;
-            case RT_DEVICE_FLAG_RDONLY:
-                config[8] &= 0xFC;
-                config[8] |= 0x02;
-                break;
-            default:
-                break;
-            }
+        case RT_DEVICE_FLAG_RDONLY:
+            config[8] &= 0xFC;
+            config[8] |= 0x02;
             break;
-        }
         default:
-        {
             break;
         }
+        break;
+    }
+    default:
+    {
+        break;
+    }
     }
 
-    if(gt911_write_reg(&gt911_client, config, sizeof(GT911_CFG_TBL) + GT911_ADDR_LEN) != RT_EOK)
+    if (gt911_write_reg(&gt911_client, config, sizeof(GT911_CFG_TBL) + GT911_ADDR_LEN) != RT_EOK)
     {
         LOG_D("send config failed");
         return -1;
@@ -408,7 +400,7 @@ static rt_err_t gt911_control(struct rt_touch_device *touch, int cmd, void *arg)
     buf[1] = (rt_uint8_t)(GT911_CHECK_SUM & 0xFF);
     buf[2] = 0;
 
-    for(i = GT911_ADDR_LEN; i < sizeof(GT911_CFG_TBL) + GT911_ADDR_LEN; i++)
+    for (i = GT911_ADDR_LEN; i < sizeof(GT911_CFG_TBL) + GT911_ADDR_LEN; i++)
     {
         buf[GT911_ADDR_LEN] += config[i];
     }
@@ -434,7 +426,7 @@ int rt_hw_gt911_init(const char *name, struct rt_touch_config *cfg)
     rt_uint32_t bus_speed = 400000;
 
     touch_device = (struct rt_touch_device *)rt_malloc(sizeof(struct rt_touch_device));
-    if(touch_device == RT_NULL)
+    if (touch_device == RT_NULL)
     {
         LOG_E("touch device malloc fail");
         return -RT_ERROR;
@@ -455,19 +447,19 @@ int rt_hw_gt911_init(const char *name, struct rt_touch_config *cfg)
 
     gt911_client.bus = (struct rt_i2c_bus_device *)rt_device_find(cfg->dev_name);
 
-    if(gt911_client.bus == RT_NULL)
+    if (gt911_client.bus == RT_NULL)
     {
         LOG_E("Can't find %s device", cfg->dev_name);
         return -RT_ERROR;
     }
 
-    if(rt_device_open((rt_device_t)gt911_client.bus, RT_DEVICE_FLAG_RDWR) != RT_EOK)
+    if (rt_device_open((rt_device_t)gt911_client.bus, RT_DEVICE_FLAG_RDWR) != RT_EOK)
     {
         LOG_E("open %s device failed", cfg->dev_name);
         return -RT_ERROR;
     }
 
-    if ( rt_device_control((rt_device_t)gt911_client.bus, RT_I2C_DEV_CTRL_CLK, &bus_speed) != RT_EOK )
+    if (rt_device_control((rt_device_t)gt911_client.bus, RT_I2C_DEV_CTRL_CLK, &bus_speed) != RT_EOK)
     {
         LOG_E("control %s device failed", cfg->dev_name);
         return -RT_ERROR;
@@ -476,6 +468,12 @@ int rt_hw_gt911_init(const char *name, struct rt_touch_config *cfg)
     gt911_client.client_addr = GT911_ADDRESS_HIGH;
     gt911_soft_reset(&gt911_client);
 
+    rt_memset(&pre_x[0], 0xff,  GT911_MAX_TOUCH * sizeof(rt_int16_t));
+    rt_memset(&pre_y[0], 0xff,  GT911_MAX_TOUCH * sizeof(rt_int16_t));
+    rt_memset(&pre_w[0], 0xff,  GT911_MAX_TOUCH * sizeof(rt_int16_t));
+    rt_memset(&s_tp_dowm[0], 0, GT911_MAX_TOUCH * sizeof(rt_int16_t));
+    rt_memset(&pre_id[0], 0xff, GT911_MAX_TOUCH * sizeof(rt_uint8_t));
+
     /* register touch device */
     touch_device->info.type = RT_TOUCH_TYPE_CAPACITANCE;
     touch_device->info.vendor = RT_TOUCH_VENDOR_GT;

bsp/nuvoton/libraries/nu_packages/TPC/ili.c

@@ -325,9 +325,9 @@ static void ili_info_dump(ili_ts_data_t psIliTs)
     rt_kprintf("ic_mode: %d\n", psIliTs->ic_mode);
 }
 
-static rt_int16_t pre_x[ILI_MAX_TOUCH] = {-1, -1, -1, -1, -1};
-static rt_int16_t pre_y[ILI_MAX_TOUCH] = {-1, -1, -1, -1, -1};
-static rt_int16_t pre_w[ILI_MAX_TOUCH] = {-1, -1, -1, -1, -1};
+static rt_int16_t pre_x[ILI_MAX_TOUCH];
+static rt_int16_t pre_y[ILI_MAX_TOUCH];
+static rt_int16_t pre_w[ILI_MAX_TOUCH];
 static rt_uint8_t s_tp_dowm[ILI_MAX_TOUCH];
 
 static void ili_touch_up(void *buf, int8_t id)
@@ -381,6 +381,8 @@ static void ili_touch_down(void *buf, int8_t id, int16_t x, int16_t y, int16_t w
     pre_w[id] = w;
 }
 
+static int8_t pre_id[ILI_MAX_TOUCH];
+static rt_uint8_t pre_touch = 0;
 static rt_size_t ili_read_point(struct rt_touch_device *touch, void *buf, rt_size_t read_num)
 {
 #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
@@ -395,8 +397,10 @@ static rt_size_t ili_read_point(struct rt_touch_device *touch, void *buf, rt_siz
     rt_uint16_t x, y;
     rt_int32_t   tip, point_id;
 
-    static rt_uint8_t pre_touch = 0;
-    static int8_t pre_id[ILI_MAX_TOUCH] = {0};
+    RT_ASSERT(touch);
+    RT_ASSERT(buf);
+    RT_ASSERT(read_num != 0);
+    RT_ASSERT(read_num <= ILI_MAX_TOUCH);
 
     error = ili_i2c_write_and_read(ts->client, NULL, 0, 0, tmpbuf, 64);
     if (error)
@@ -425,7 +429,7 @@ static rt_size_t ili_read_point(struct rt_touch_device *touch, void *buf, rt_siz
 
     if (pre_touch > touch_num)                                       /* point up */
     {
-        for (i = 0; i < pre_touch; i++)
+        for (i = 0; i < ILI_MAX_TOUCH; i++)
         {
             rt_uint8_t j;
             for (j = 0; j < touch_num; j++)                          /* this time touch num */
@@ -435,13 +439,15 @@ static rt_size_t ili_read_point(struct rt_touch_device *touch, void *buf, rt_siz
                 if (pre_id[i] == point_id)                   /* this id is not free */
                     break;
 
-                if (j >= touch_num - 1)
-                {
-                    ili_touch_up(buf, pre_id[i]);
-                }
+            }
+            if ((j == touch_num) && (pre_id[i] != -1))
+            {
+                ili_touch_up(buf, pre_id[i]);
+                pre_id[i] = -1;
             }
         }
     }
+
     if (touch_num > 0)
     {
         uint32_t range_x = touch->info.range_x;
@@ -483,6 +489,8 @@ static rt_size_t ili_read_point(struct rt_touch_device *touch, void *buf, rt_siz
 
 exit_ili_read_point:
 
+    pre_touch = 0;
+
     return 0;
 }
 
@@ -607,6 +615,12 @@ int rt_hw_ili_tpc_init(const char *name, struct rt_touch_config *cfg)
         goto exit_rt_hw_ili_tpc_init;
     }
 
+    rt_memset(&pre_x[0], 0xff, ILI_MAX_TOUCH * sizeof(int16_t));
+    rt_memset(&pre_y[0], 0xff, ILI_MAX_TOUCH * sizeof(int16_t));
+    rt_memset(&pre_w[0], 0xff, ILI_MAX_TOUCH * sizeof(int16_t));
+    rt_memset(&s_tp_dowm[0], 0, ILI_MAX_TOUCH * sizeof(int16_t));
+    rt_memset(&pre_id[0], 0xff,  ILI_MAX_TOUCH * sizeof(int8_t));
+
     /* register touch device */
     rt_memcpy(&touch_device->config, cfg, sizeof(struct rt_touch_config));
     touch_device->ops = &ili_touch_ops;

bsp/nuvoton/libraries/nu_packages/TPC/tpc_worker.c

@@ -34,7 +34,7 @@ static void tpc_entry(void *parameter)
     struct rt_touch_info info;
     rt_device_t  dev = RT_NULL;
 
-    const char *name = "ili_tpc";
+    const char *name = (const char *)parameter;
     rt_uint32_t x_range = BSP_LCD_WIDTH;
     rt_uint32_t y_range = BSP_LCD_HEIGHT;
 
@@ -87,9 +87,19 @@ static void tpc_entry(void *parameter)
                         || read_data[i].event == RT_TOUCH_EVENT_UP
                         || read_data[i].event == RT_TOUCH_EVENT_MOVE)
                 {
-                    //rt_kprintf("[%d] %d %d\n", read_data[i].event, read_data[i].x_coordinate, read_data[i].y_coordinate);
+                    rt_uint16_t  u16X, u16Y;
 
-                    nu_touch_inputevent_cb(read_data[i].x_coordinate, read_data[i].y_coordinate, read_data[i].event);
+                    u16X = read_data[i].x_coordinate;
+                    u16Y = read_data[i].y_coordinate;
+
+                    #if defined(NU_PKG_TPC_REVERSE_XY)
+                        u16X = info.range_x - u16X;
+                        u16Y = info.range_y - u16Y;
+                    #endif
+
+                    //rt_kprintf("[%d] %d %d\n", read_data[i].event, u16X, u16Y);
+
+                    nu_touch_inputevent_cb(u16X, u16Y, read_data[i].event);
                 }
             }
         }
@@ -99,12 +109,12 @@ static void tpc_entry(void *parameter)
 
 
 /* Test function */
-int tpc_sample(void)
+int tpc_sample(const char *tpc_name)
 {
     rt_thread_t  tpc_thread;
     tpc_thread = rt_thread_create("tpc",
                                   tpc_entry,
-                                  RT_NULL,
+                                  (void *)tpc_name,
                                   THREAD_STACK_SIZE,
                                   THREAD_PRIORITY,
                                   THREAD_TIMESLICE);
@@ -114,4 +124,3 @@ int tpc_sample(void)
 
     return 0;
 }
-INIT_APP_EXPORT(tpc_sample);

bsp/nuvoton/nk-980iot/.config

@@ -29,7 +29,7 @@ CONFIG_IDLE_THREAD_STACK_SIZE=2048
 # CONFIG_RT_KSERVICE_USING_STDLIB is not set
 # CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
 # CONFIG_RT_USING_TINY_FFS is not set
-# CONFIG_RT_KPRINTF_USING_LONGLONG is not set
+# CONFIG_RT_PRINTF_LONGLONG is not set
 CONFIG_RT_DEBUG=y
 CONFIG_RT_DEBUG_COLOR=y
 # CONFIG_RT_DEBUG_INIT_CONFIG is not set
@@ -80,7 +80,7 @@ CONFIG_RT_USING_DEVICE=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=256
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart0"
-CONFIG_RT_VER_NUM=0x40101
+CONFIG_RT_VER_NUM=0x40100
 CONFIG_ARCH_ARM=y
 # CONFIG_RT_USING_CPU_FFS is not set
 CONFIG_ARCH_ARM_ARM9=y
@@ -617,7 +617,6 @@ CONFIG_PKG_WAVPLAYER_VER="latest"
 # CONFIG_PKG_USING_FDT is not set
 # CONFIG_PKG_USING_CBOX is not set
 # CONFIG_PKG_USING_SNOWFLAKE is not set
-# CONFIG_PKG_USING_HASH_MATCH is not set
 
 #
 # system packages
@@ -989,3 +988,5 @@ CONFIG_NU_PKG_USING_NAU8822=y
 # CONFIG_NU_PKG_USING_TPC is not set
 # CONFIG_NU_PKG_USING_ADC_TOUCH is not set
 CONFIG_NU_PKG_USING_SPINAND=y
+CONFIG_UTEST_CMD_PREFIX="bsp.nuvoton.utest."
+CONFIG_BOARD_USE_UTEST=y

bsp/nuvoton/nk-980iot/applications/lvgl/lv_conf.h

@@ -5,22 +5,33 @@
  *
  * Change Logs:
  * Date           Author        Notes
- * 2021-10-18     Meco Man      First version
+ * 2022-2-17      Wayne         First version
  */
 
 #ifndef LV_CONF_H
 #define LV_CONF_H
 
-#define LV_USE_PERF_MONITOR     1
-#define LV_COLOR_DEPTH          16
+#include "rtconfig.h"
 
-#define LV_HOR_RES_MAX          (320)
-#define LV_VER_RES_MAX          (240)
+#define LV_COLOR_DEPTH                  BSP_LCD_BPP
+#define LV_HOR_RES_MAX                  BSP_LCD_WIDTH
+#define LV_VER_RES_MAX                  BSP_LCD_HEIGHT
 
 #define LV_FONT_MONTSERRAT_12           1
 #define LV_FONT_MONTSERRAT_16           1
-#define LV_USE_DEMO_RTT_MUSIC           1
-#define LV_DEMO_RTT_MUSIC_AUTO_PLAY     1
-
+#define LV_USE_PERF_MONITOR             1
 //#define CONFIG_LV_LOG_LEVEL LV_LOG_LEVEL_TRACE
+
+//#define LV_USE_DEMO_RTT_MUSIC         1
+#if LV_USE_DEMO_RTT_MUSIC
+    #define LV_DEMO_RTT_MUSIC_AUTO_PLAY   1
+
+    #define LV_USE_DEMO_MUSIC             1
+    #define LV_DEMO_MUSIC_AUTO_PLAY       1
+#endif
+
+/* Please comment LV_USE_DEMO_RTT_MUSIC declaration before un-comment below */
+#define LV_USE_DEMO_WIDGETS         1
+//#define LV_USE_DEMO_BENCHMARK       1
+
 #endif

bsp/nuvoton/nk-980iot/applications/lvgl/lv_demo.c

@@ -5,45 +5,28 @@
  *
  * Change Logs:
  * Date           Author        Notes
- * 2021-10-17     Meco Man      First version
+ * 2022-6-1       Wayne         First version
  */
-#include <rtthread.h>
+
 #include <lvgl.h>
-#define DBG_TAG    "LVGL"
-#define DBG_LVL    DBG_INFO
-#include <rtdbg.h>
 
-#ifndef LV_THREAD_STACK_SIZE
-    #define LV_THREAD_STACK_SIZE 4096
+void lv_user_gui_init(void)
+{
+    /* display demo; you may replace with your LVGL application at here and disable related definitions. */
+
+#if LV_USE_DEMO_BENCHMARK
+    extern void lv_demo_benchmark(void);
+    lv_demo_benchmark();
 #endif
 
-#ifndef LV_THREAD_PRIO
-    #define LV_THREAD_PRIO (RT_THREAD_PRIORITY_MAX*2/3)
+#if LV_USE_DEMO_WIDGETS
+    extern void lv_demo_widgets(void);
+    lv_demo_widgets();
 #endif
 
-static void lvgl_thread(void *parameter)
-{
+#if LV_USE_DEMO_MUSIC || LV_USE_DEMO_RTT_MUSIC
     extern void lv_demo_music(void);
     lv_demo_music();
+#endif
 
-    while (1)
-    {
-        lv_task_handler();
-        rt_thread_mdelay(1);
-    }
-}
-
-static int lvgl_demo_init(void)
-{
-    rt_thread_t tid;
-
-    tid = rt_thread_create("LVGL", lvgl_thread, RT_NULL, LV_THREAD_STACK_SIZE, LV_THREAD_PRIO, 10);
-    if (tid == RT_NULL)
-    {
-        LOG_E("Fail to create 'LVGL' thread");
-    }
-    rt_thread_startup(tid);
-
-    return 0;
 }
-INIT_APP_EXPORT(lvgl_demo_init);

bsp/nuvoton/nk-980iot/applications/lvgl/lv_port_disp.c

@@ -67,10 +67,10 @@ void lv_port_disp_init(void)
               info.bits_per_pixel == 24 || info.bits_per_pixel == 32);
 
     buf1 = (void *)info.framebuffer;
-    rt_kprintf("LVGL: Use one buffers - buf1@%08x\n", buf1);
+    rt_kprintf("LVGL: Use one buffers - buf1@%08x, size: %d bytes\n", buf1, info.smem_len);
 
     /*Initialize `disp_buf` with the buffer(s).*/
-    lv_disp_draw_buf_init(&disp_buf, buf1, RT_NULL, info.width * info.height);
+    lv_disp_draw_buf_init(&disp_buf, buf1, RT_NULL, info.smem_len / (info.bits_per_pixel / 8));
 
     result = rt_device_open(lcd_device, 0);
     if (result != RT_EOK)

bsp/nuvoton/nk-980iot/applications/lvgl/lv_port_indev.c

@@ -31,15 +31,12 @@ void nu_touch_inputevent_cb(rt_int16_t x, rt_int16_t y, rt_uint8_t state)
     case RT_TOUCH_EVENT_UP:
         last_state = LV_INDEV_STATE_RELEASED;
         break;
+    case RT_TOUCH_EVENT_MOVE:
     case RT_TOUCH_EVENT_DOWN:
         last_x = x;
         last_y = y;
         last_state = LV_INDEV_STATE_PRESSED;
         break;
-    case RT_TOUCH_EVENT_MOVE:
-        last_x = x;
-        last_y = y;
-        break;
     }
 }
 

bsp/nuvoton/nk-980iot/applications/mnt.c

@@ -55,8 +55,12 @@ const void   *data;
 
 const struct dfs_mount_tbl mount_table[] =
 {
+#if defined(PKG_USING_RAMDISK)
     { RAMDISK_UDC, "/mnt/ram_usbd", "elm", 0, RT_NULL },
-#if defined(RT_USING_DFS_UFFS)
+#endif
+#if defined(PKG_USING_DFS_YAFFS)
+    { "nand1", "/mnt/filesystem", "yaffs", 0, RT_NULL },
+#elif defined(RT_USING_DFS_UFFS)
     { "nand1", "/mnt/filesystem", "uffs", 0, RT_NULL },
 #endif
     {0},
@@ -211,6 +215,28 @@ exit_filesystem_init:
 INIT_ENV_EXPORT(filesystem_init);
 #endif
 
+#if defined(PKG_USING_DFS_YAFFS) && defined(RT_USING_DFS_MNTTABLE)
+#include "yaffs_guts.h"
+int yaffs_dev_init(void)
+{
+    int i;
+    for (i=0; i<sizeof(mount_table)/sizeof(struct dfs_mount_tbl);i++)
+    {
+        if ( mount_table[i].filesystemtype && !rt_strcmp( mount_table[i].filesystemtype, "yaffs") )
+        {
+             struct rt_mtd_nand_device* psMtdNandDev = RT_MTD_NAND_DEVICE(rt_device_find(mount_table[i].device_name));
+             if ( psMtdNandDev )
+             {
+                  yaffs_start_up(psMtdNandDev, (const char*)mount_table[i].path);
+             }
+        }
+    }
+
+    return 0;
+}
+INIT_ENV_EXPORT(yaffs_dev_init);
+#endif
+
 #if defined(BOARD_USING_STORAGE_SPIFLASH)
 int mnt_init_spiflash0(void)
 {

bsp/nuvoton/nk-980iot/board/Kconfig

@@ -79,8 +79,6 @@ menu "Hardware Drivers Config"
             select NU_PKG_ILI9341_WITH_OFFSCREEN_FRAMEBUFFER
             select NU_PKG_ILI9341_HORIZONTAL
             select BSP_USING_SPI0
-            select PKG_USING_LVGL
-            select PKG_USING_LV_MUSIC_DEMO
             default n
 
         if BOARD_USING_LCD_ILI9341

bsp/nuvoton/nk-980iot/board/board_dev.c

@@ -157,18 +157,21 @@ struct rt_mtd_nand_device mtd_partitions[MTD_SPINAND_PARTITION_NUM] =
 {
     [0] =
     {
-        .block_start =  0,
+        /*nand0: U-boot, env, rtthread*/
+        .block_start = 0,
         .block_end   = 63,
         .block_total = 64,
     },
     [1] =
     {
+        /*nand1: for filesystem mounting*/
         .block_start = 64,
         .block_end   = 1023,
-        .block_total = 1000,
+        .block_total = 960,
     },
     [2] =
     {
+        /*nand2: Whole blocks size, overlay*/
         .block_start = 0,
         .block_end   = 1023,
         .block_total = 1024,

bsp/nuvoton/nk-980iot/config_lvgl

@@ -29,7 +29,7 @@ CONFIG_IDLE_THREAD_STACK_SIZE=2048
 # CONFIG_RT_KSERVICE_USING_STDLIB is not set
 # CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
 # CONFIG_RT_USING_TINY_FFS is not set
-# CONFIG_RT_PRINTF_LONGLONG is not set
+# CONFIG_RT_KPRINTF_USING_LONGLONG is not set
 CONFIG_RT_DEBUG=y
 CONFIG_RT_DEBUG_COLOR=y
 # CONFIG_RT_DEBUG_INIT_CONFIG is not set
@@ -80,7 +80,7 @@ CONFIG_RT_USING_DEVICE=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=256
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart0"
-CONFIG_RT_VER_NUM=0x40100
+CONFIG_RT_VER_NUM=0x40101
 CONFIG_ARCH_ARM=y
 # CONFIG_RT_USING_CPU_FFS is not set
 CONFIG_ARCH_ARM_ARM9=y
@@ -94,17 +94,8 @@ CONFIG_RT_USING_USER_MAIN=y
 CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
 CONFIG_RT_MAIN_THREAD_PRIORITY=10
 # CONFIG_RT_USING_LEGACY is not set
-
-#
-# C++ features
-#
-# CONFIG_RT_USING_CPLUSPLUS is not set
-
-#
-# Command shell
-#
-CONFIG_RT_USING_FINSH=y
 CONFIG_RT_USING_MSH=y
+CONFIG_RT_USING_FINSH=y
 CONFIG_FINSH_USING_MSH=y
 CONFIG_FINSH_THREAD_NAME="tshell"
 CONFIG_FINSH_THREAD_PRIORITY=20
@@ -118,10 +109,6 @@ CONFIG_FINSH_USING_DESCRIPTION=y
 # CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
 # CONFIG_FINSH_USING_AUTH is not set
 CONFIG_FINSH_ARG_MAX=10
-
-#
-# Device virtual file system
-#
 CONFIG_RT_USING_DFS=y
 CONFIG_DFS_USING_POSIX=y
 CONFIG_DFS_USING_WORKDIR=y
@@ -156,6 +143,8 @@ CONFIG_RT_USING_DFS_DEVFS=y
 # CONFIG_RT_USING_DFS_ROMFS is not set
 # CONFIG_RT_USING_DFS_RAMFS is not set
 # CONFIG_RT_USING_DFS_NFS is not set
+# CONFIG_RT_USING_FAL is not set
+# CONFIG_RT_USING_LWP is not set
 
 #
 # Device Drivers
@@ -191,6 +180,7 @@ CONFIG_RT_USING_ALARM=y
 # CONFIG_RT_USING_SOFT_RTC is not set
 # CONFIG_RT_USING_SDIO is not set
 CONFIG_RT_USING_SPI=y
+# CONFIG_RT_USING_SPI_BITOPS is not set
 CONFIG_RT_USING_QSPI=y
 # CONFIG_RT_USING_SPI_MSD is not set
 # CONFIG_RT_USING_SFUD is not set
@@ -262,7 +252,7 @@ CONFIG_RT_VCOM_TX_TIMEOUT=1000
 CONFIG_RT_USB_MSTORAGE_DISK_NAME="ramdisk1"
 
 #
-# POSIX layer and C standard library
+# C/C++ and POSIX layer
 #
 CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 
@@ -274,6 +264,7 @@ CONFIG_RT_USING_POSIX_FS=y
 # CONFIG_RT_USING_POSIX_STDIO is not set
 CONFIG_RT_USING_POSIX_POLL=y
 CONFIG_RT_USING_POSIX_SELECT=y
+CONFIG_RT_USING_POSIX_SOCKET=y
 # CONFIG_RT_USING_POSIX_TERMIOS is not set
 # CONFIG_RT_USING_POSIX_AIO is not set
 # CONFIG_RT_USING_POSIX_MMAN is not set
@@ -293,26 +284,21 @@ CONFIG_RT_USING_POSIX_SELECT=y
 #
 # Socket is in the 'Network' category
 #
+# CONFIG_RT_USING_CPLUSPLUS is not set
 
 #
 # Network
 #
-
-#
-# Socket abstraction layer
-#
 CONFIG_RT_USING_SAL=y
 # CONFIG_SAL_INTERNET_CHECK is not set
 
 #
-# protocol stack implement
+# Docking with protocol stacks
 #
 CONFIG_SAL_USING_LWIP=y
+# CONFIG_SAL_USING_AT is not set
+# CONFIG_SAL_USING_TLS is not set
 CONFIG_SAL_USING_POSIX=y
-
-#
-# Network interface device
-#
 CONFIG_RT_USING_NETDEV=y
 CONFIG_NETDEV_USING_IFCONFIG=y
 CONFIG_NETDEV_USING_PING=y
@@ -322,14 +308,13 @@ CONFIG_NETDEV_USING_AUTO_DEFAULT=y
 CONFIG_NETDEV_IPV4=1
 CONFIG_NETDEV_IPV6=0
 # CONFIG_NETDEV_IPV6_SCOPES is not set
-
-#
-# light weight TCP/IP stack
-#
 CONFIG_RT_USING_LWIP=y
+# CONFIG_RT_USING_LWIP_LOCAL_VERSION is not set
 # CONFIG_RT_USING_LWIP141 is not set
 # CONFIG_RT_USING_LWIP203 is not set
 CONFIG_RT_USING_LWIP212=y
+# CONFIG_RT_USING_LWIP_LATEST is not set
+CONFIG_RT_USING_LWIP_VER_NUM=0x20102
 # CONFIG_RT_USING_LWIP_IPV6 is not set
 CONFIG_RT_LWIP_MEM_ALIGNMENT=4
 CONFIG_RT_LWIP_IGMP=y
@@ -379,18 +364,9 @@ CONFIG_LWIP_NETIF_LOOPBACK=1
 CONFIG_RT_LWIP_STATS=y
 # CONFIG_RT_LWIP_USING_HW_CHECKSUM is not set
 CONFIG_RT_LWIP_USING_PING=y
+# CONFIG_LWIP_USING_DHCPD is not set
 # CONFIG_RT_LWIP_DEBUG is not set
-
-#
-# AT commands
-#
 # CONFIG_RT_USING_AT is not set
-# CONFIG_LWIP_USING_DHCPD is not set
-
-#
-# VBUS(Virtual Software BUS)
-#
-# CONFIG_RT_USING_VBUS is not set
 
 #
 # Utilities
@@ -402,7 +378,7 @@ CONFIG_UTEST_THR_STACK_SIZE=4096
 CONFIG_UTEST_THR_PRIORITY=20
 # CONFIG_RT_USING_VAR_EXPORT is not set
 # CONFIG_RT_USING_RT_LINK is not set
-# CONFIG_RT_USING_LWP is not set
+# CONFIG_RT_USING_VBUS is not set
 
 #
 # RT-Thread Utestcases
@@ -416,6 +392,7 @@ CONFIG_UTEST_THR_PRIORITY=20
 #
 # IoT - internet of things
 #
+# CONFIG_PKG_USING_LWIP is not set
 # CONFIG_PKG_USING_LORAWAN_DRIVER is not set
 # CONFIG_PKG_USING_PAHOMQTT is not set
 # CONFIG_PKG_USING_UMQTT is not set
@@ -426,12 +403,8 @@ CONFIG_UTEST_THR_PRIORITY=20
 # CONFIG_PKG_USING_KAWAII_MQTT is not set
 # CONFIG_PKG_USING_BC28_MQTT is not set
 # CONFIG_PKG_USING_WEBTERMINAL is not set
-# CONFIG_PKG_USING_CJSON is not set
-# CONFIG_PKG_USING_JSMN is not set
 # CONFIG_PKG_USING_LIBMODBUS is not set
 # CONFIG_PKG_USING_FREEMODBUS is not set
-# CONFIG_PKG_USING_LJSON is not set
-# CONFIG_PKG_USING_EZXML is not set
 # CONFIG_PKG_USING_NANOPB is not set
 
 #
@@ -486,6 +459,7 @@ CONFIG_PKG_NETUTILS_VER_NUM=0x99999
 # CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set
 # CONFIG_PKG_USING_JOYLINK is not set
 # CONFIG_PKG_USING_EZ_IOT_OS is not set
+# CONFIG_PKG_USING_IOTSHARP_SDK is not set
 # CONFIG_PKG_USING_NIMBLE is not set
 # CONFIG_PKG_USING_LLSYNC_SDK_ADAPTER is not set
 # CONFIG_PKG_USING_OTA_DOWNLOADER is not set
@@ -501,16 +475,13 @@ CONFIG_PKG_NETUTILS_VER_NUM=0x99999
 # CONFIG_PKG_USING_ABUP_FOTA is not set
 # CONFIG_PKG_USING_LIBCURL2RTT is not set
 # CONFIG_PKG_USING_CAPNP is not set
-# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
 # CONFIG_PKG_USING_AGILE_TELNET is not set
 # CONFIG_PKG_USING_NMEALIB is not set
-# CONFIG_PKG_USING_AGILE_JSMN is not set
 # CONFIG_PKG_USING_PDULIB is not set
 # CONFIG_PKG_USING_BTSTACK is not set
 # CONFIG_PKG_USING_LORAWAN_ED_STACK is not set
 # CONFIG_PKG_USING_WAYZ_IOTKIT is not set
 # CONFIG_PKG_USING_MAVLINK is not set
-# CONFIG_PKG_USING_RAPIDJSON is not set
 # CONFIG_PKG_USING_BSAL is not set
 # CONFIG_PKG_USING_AGILE_MODBUS is not set
 # CONFIG_PKG_USING_AGILE_FTP is not set
@@ -522,12 +493,14 @@ CONFIG_PKG_NETUTILS_VER_NUM=0x99999
 # CONFIG_PKG_USING_HM is not set
 # CONFIG_PKG_USING_SMALL_MODBUS is not set
 # CONFIG_PKG_USING_NET_SERVER is not set
+# CONFIG_PKG_USING_ZFTP is not set
 
 #
 # security packages
 #
 # CONFIG_PKG_USING_MBEDTLS is not set
 # CONFIG_PKG_USING_LIBSODIUM is not set
+# CONFIG_PKG_USING_LIBHYDROGEN is not set
 # CONFIG_PKG_USING_TINYCRYPT is not set
 # CONFIG_PKG_USING_TFM is not set
 # CONFIG_PKG_USING_YD_CRYPTO is not set
@@ -535,11 +508,28 @@ CONFIG_PKG_NETUTILS_VER_NUM=0x99999
 #
 # language packages
 #
+
+#
+# JSON: JavaScript Object Notation, a lightweight data-interchange format
+#
+# CONFIG_PKG_USING_CJSON is not set
+# CONFIG_PKG_USING_LJSON is not set
+# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
+# CONFIG_PKG_USING_RAPIDJSON is not set
+# CONFIG_PKG_USING_JSMN is not set
+# CONFIG_PKG_USING_AGILE_JSMN is not set
+
+#
+# XML: Extensible Markup Language
+#
+# CONFIG_PKG_USING_SIMPLE_XML is not set
+# CONFIG_PKG_USING_EZXML is not set
 # CONFIG_PKG_USING_LUATOS_SOC is not set
 # CONFIG_PKG_USING_LUA is not set
 # CONFIG_PKG_USING_JERRYSCRIPT is not set
 # CONFIG_PKG_USING_MICROPYTHON is not set
 # CONFIG_PKG_USING_PIKASCRIPT is not set
+# CONFIG_PKG_USING_RTT_RUST is not set
 
 #
 # multimedia packages
@@ -550,17 +540,16 @@ CONFIG_PKG_NETUTILS_VER_NUM=0x99999
 #
 CONFIG_PKG_USING_LVGL=y
 CONFIG_PKG_LVGL_PATH="/packages/multimedia/LVGL/LVGL"
-# CONFIG_PKG_USING_LVGL_EXAMPLES is not set
-# CONFIG_PKG_USING_LVGL_DEMOS is not set
-CONFIG_PKG_USING_LVGL_V820=y
-# CONFIG_PKG_USING_LVGL_V810 is not set
-# CONFIG_PKG_USING_LVGL_LATEST_VERSION is not set
-CONFIG_PKG_LVGL_VER="v8.2.0"
-CONFIG_PKG_LVGL_VER_NUM=0x08020
+CONFIG_PKG_LVGL_THREAD_PRIO=20
+CONFIG_PKG_LVGL_THREAD_STACK_SIZE=4096
+CONFIG_PKG_LVGL_DISP_REFR_PERIOD=30
+# CONFIG_PKG_LVGL_USING_EXAMPLES is not set
+CONFIG_PKG_LVGL_USING_DEMOS=y
+CONFIG_PKG_LVGL_VER_NUM=0x99999
+CONFIG_PKG_LVGL_VER="latest"
 # CONFIG_PKG_USING_LITTLEVGL2RTT is not set
-CONFIG_PKG_USING_LV_MUSIC_DEMO=y
-CONFIG_PKG_LV_MUSIC_DEMO_PATH="/packages/multimedia/LVGL/lv_music_demo"
-CONFIG_PKG_LV_MUSIC_DEMO_VER="v0.2.0"
+# CONFIG_PKG_USING_LV_MUSIC_DEMO is not set
+# CONFIG_PKG_USING_GUI_GUIDER_DEMO is not set
 
 #
 # u8g2: a monochrome graphic library
@@ -598,6 +587,8 @@ CONFIG_PKG_WAVPLAYER_VER="latest"
 # CONFIG_PKG_USING_TERMBOX is not set
 # CONFIG_PKG_USING_VT100 is not set
 # CONFIG_PKG_USING_QRCODE is not set
+# CONFIG_PKG_USING_GUIENGINE is not set
+# CONFIG_PKG_USING_PERSIMMON is not set
 
 #
 # tools packages
@@ -640,6 +631,10 @@ CONFIG_PKG_WAVPLAYER_VER="latest"
 # CONFIG_PKG_USING_SOLAR_TERMS is not set
 # CONFIG_PKG_USING_GAN_ZHI is not set
 # CONFIG_PKG_USING_FDT is not set
+# CONFIG_PKG_USING_CBOX is not set
+# CONFIG_PKG_USING_SNOWFLAKE is not set
+# CONFIG_PKG_USING_HASH_MATCH is not set
+# CONFIG_PKG_USING_FIRE_PID_CURVE is not set
 
 #
 # system packages
@@ -671,6 +666,7 @@ CONFIG_PKG_WAVPLAYER_VER="latest"
 # CMSIS: ARM Cortex-M Microcontroller Software Interface Standard
 #
 # CONFIG_PKG_USING_CMSIS_5 is not set
+# CONFIG_PKG_USING_CMSIS_RTOS1 is not set
 # CONFIG_PKG_USING_CMSIS_RTOS2 is not set
 
 #
@@ -682,13 +678,10 @@ CONFIG_PKG_WAVPLAYER_VER="latest"
 # CONFIG_PKG_USING_UC_CLK is not set
 # CONFIG_PKG_USING_UC_COMMON is not set
 # CONFIG_PKG_USING_UC_MODBUS is not set
-# CONFIG_RT_USING_ARDUINO is not set
-# CONFIG_PKG_USING_GUIENGINE is not set
-# CONFIG_PKG_USING_PERSIMMON is not set
+# CONFIG_PKG_USING_RTDUINO is not set
 # CONFIG_PKG_USING_CAIRO is not set
 # CONFIG_PKG_USING_PIXMAN is not set
 # CONFIG_PKG_USING_PARTITION is not set
-# CONFIG_PKG_USING_FAL is not set
 # CONFIG_PKG_USING_FLASHDB is not set
 # CONFIG_PKG_USING_SQLITE is not set
 # CONFIG_PKG_USING_RTI is not set
@@ -728,6 +721,9 @@ CONFIG_PKG_RAMDISK_VER="latest"
 # CONFIG_PKG_USING_MCUBOOT is not set
 # CONFIG_PKG_USING_TINYUSB is not set
 # CONFIG_PKG_USING_CHERRYUSB is not set
+# CONFIG_PKG_USING_KMULTI_RTIMER is not set
+# CONFIG_PKG_USING_TFDB is not set
+# CONFIG_PKG_USING_QPC is not set
 
 #
 # peripheral libraries and drivers
@@ -751,6 +747,7 @@ CONFIG_PKG_RAMDISK_VER="latest"
 # CONFIG_PKG_USING_WM_LIBRARIES is not set
 # CONFIG_PKG_USING_KENDRYTE_SDK is not set
 # CONFIG_PKG_USING_INFRARED is not set
+# CONFIG_PKG_USING_MULTI_INFRARED is not set
 # CONFIG_PKG_USING_AGILE_BUTTON is not set
 # CONFIG_PKG_USING_AGILE_LED is not set
 # CONFIG_PKG_USING_AT24CXX is not set
@@ -807,6 +804,7 @@ CONFIG_PKG_RAMDISK_VER="latest"
 # CONFIG_PKG_USING_SOFT_SERIAL is not set
 # CONFIG_PKG_USING_MB85RS16 is not set
 # CONFIG_PKG_USING_CW2015 is not set
+# CONFIG_PKG_USING_RFM300 is not set
 
 #
 # AI packages
@@ -825,6 +823,10 @@ CONFIG_PKG_RAMDISK_VER="latest"
 # miscellaneous packages
 #
 
+#
+# project laboratory
+#
+
 #
 # samples: kernel and components samples
 #
@@ -879,6 +881,9 @@ CONFIG_PKG_OPTPARSE_VER="latest"
 # CONFIG_PKG_USING_DESIGN_PATTERN is not set
 # CONFIG_PKG_USING_CONTROLLER is not set
 # CONFIG_PKG_USING_PHASE_LOCKED_LOOP is not set
+# CONFIG_PKG_USING_MFBD is not set
+# CONFIG_PKG_USING_SLCAN2RTT is not set
+# CONFIG_PKG_USING_SOEM is not set
 
 #
 # Hardware Drivers Config
@@ -998,6 +1003,7 @@ CONFIG_BOARD_USING_ILI9341_PIN_DC=89
 #
 CONFIG_NU_PKG_USING_UTILS=y
 CONFIG_NU_PKG_USING_DEMO=y
+# CONFIG_NU_PKG_USING_LVGL is not set
 # CONFIG_NU_PKG_USING_BMX055 is not set
 # CONFIG_NU_PKG_USING_MAX31875 is not set
 # CONFIG_NU_PKG_USING_NAU88L25 is not set
@@ -1013,8 +1019,11 @@ CONFIG_NU_PKG_ILI9341_HORIZONTAL=y
 CONFIG_BSP_LCD_BPP=16
 CONFIG_BSP_LCD_WIDTH=320
 CONFIG_BSP_LCD_HEIGHT=240
+# CONFIG_NU_PKG_USING_SSD1963 is not set
+# CONFIG_NU_PKG_USING_FSA506 is not set
+# CONFIG_NU_PKG_USING_TPC is not set
 CONFIG_NU_PKG_USING_ADC_TOUCH=y
 # CONFIG_NU_PKG_USING_ADC_TOUCH_SW is not set
 CONFIG_NU_PKG_USING_SPINAND=y
+CONFIG_UTEST_CMD_PREFIX="bsp.nuvoton.utest."
 CONFIG_BOARD_USE_UTEST=y
-CONFIG_UTEST_CMD_PREFIX="bsp.nuvoton.nk980-iot.test.utest."

bsp/nuvoton/nk-n9h30/.config

@@ -29,7 +29,7 @@ CONFIG_IDLE_THREAD_STACK_SIZE=2048
 # CONFIG_RT_KSERVICE_USING_STDLIB is not set
 # CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
 # CONFIG_RT_USING_TINY_FFS is not set
-# CONFIG_RT_PRINTF_LONGLONG is not set
+# CONFIG_RT_KPRINTF_USING_LONGLONG is not set
 CONFIG_RT_DEBUG=y
 CONFIG_RT_DEBUG_COLOR=y
 # CONFIG_RT_DEBUG_INIT_CONFIG is not set
@@ -80,7 +80,7 @@ CONFIG_RT_USING_INTERRUPT_INFO=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=256
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart0"
-CONFIG_RT_VER_NUM=0x40100
+CONFIG_RT_VER_NUM=0x40101
 CONFIG_ARCH_ARM=y
 # CONFIG_RT_USING_CPU_FFS is not set
 CONFIG_ARCH_ARM_ARM9=y
@@ -177,7 +177,8 @@ CONFIG_RT_USING_ADC=y
 # CONFIG_RT_USING_DAC is not set
 CONFIG_RT_USING_PWM=y
 # CONFIG_RT_USING_MTD_NOR is not set
-# CONFIG_RT_USING_MTD_NAND is not set
+CONFIG_RT_USING_MTD_NAND=y
+# CONFIG_RT_MTD_NAND_DEBUG is not set
 # CONFIG_RT_USING_PM is not set
 CONFIG_RT_USING_RTC=y
 CONFIG_RT_USING_ALARM=y
@@ -280,9 +281,11 @@ CONFIG_RT_USING_SAL=y
 CONFIG_SAL_INTERNET_CHECK=y
 
 #
-# protocol stack implement
+# Docking with protocol stacks
 #
 CONFIG_SAL_USING_LWIP=y
+# CONFIG_SAL_USING_AT is not set
+# CONFIG_SAL_USING_TLS is not set
 CONFIG_SAL_USING_POSIX=y
 CONFIG_RT_USING_NETDEV=y
 CONFIG_NETDEV_USING_IFCONFIG=y
@@ -428,6 +431,7 @@ CONFIG_UTEST_THR_PRIORITY=20
 # CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set
 # CONFIG_PKG_USING_JOYLINK is not set
 # CONFIG_PKG_USING_EZ_IOT_OS is not set
+# CONFIG_PKG_USING_IOTSHARP_SDK is not set
 # CONFIG_PKG_USING_NIMBLE is not set
 # CONFIG_PKG_USING_LLSYNC_SDK_ADAPTER is not set
 # CONFIG_PKG_USING_OTA_DOWNLOADER is not set
@@ -461,12 +465,14 @@ CONFIG_UTEST_THR_PRIORITY=20
 # CONFIG_PKG_USING_HM is not set
 # CONFIG_PKG_USING_SMALL_MODBUS is not set
 # CONFIG_PKG_USING_NET_SERVER is not set
+# CONFIG_PKG_USING_ZFTP is not set
 
 #
 # security packages
 #
 # CONFIG_PKG_USING_MBEDTLS is not set
 # CONFIG_PKG_USING_LIBSODIUM is not set
+# CONFIG_PKG_USING_LIBHYDROGEN is not set
 # CONFIG_PKG_USING_TINYCRYPT is not set
 # CONFIG_PKG_USING_TFM is not set
 # CONFIG_PKG_USING_YD_CRYPTO is not set
@@ -495,6 +501,7 @@ CONFIG_UTEST_THR_PRIORITY=20
 # CONFIG_PKG_USING_JERRYSCRIPT is not set
 # CONFIG_PKG_USING_MICROPYTHON is not set
 # CONFIG_PKG_USING_PIKASCRIPT is not set
+# CONFIG_PKG_USING_RTT_RUST is not set
 
 #
 # multimedia packages
@@ -505,17 +512,16 @@ CONFIG_UTEST_THR_PRIORITY=20
 #
 CONFIG_PKG_USING_LVGL=y
 CONFIG_PKG_LVGL_PATH="/packages/multimedia/LVGL/LVGL"
-# CONFIG_PKG_USING_LVGL_EXAMPLES is not set
-# CONFIG_PKG_USING_LVGL_DEMOS is not set
-# CONFIG_PKG_USING_LVGL_V820 is not set
-CONFIG_PKG_USING_LVGL_V810=y
-# CONFIG_PKG_USING_LVGL_LATEST_VERSION is not set
-CONFIG_PKG_LVGL_VER="v8.1.0"
-CONFIG_PKG_LVGL_VER_NUM=0x08010
+CONFIG_PKG_LVGL_THREAD_PRIO=20
+CONFIG_PKG_LVGL_THREAD_STACK_SIZE=4096
+CONFIG_PKG_LVGL_DISP_REFR_PERIOD=30
+# CONFIG_PKG_LVGL_USING_EXAMPLES is not set
+CONFIG_PKG_LVGL_USING_DEMOS=y
+CONFIG_PKG_LVGL_VER_NUM=0x99999
+CONFIG_PKG_LVGL_VER="latest"
 # CONFIG_PKG_USING_LITTLEVGL2RTT is not set
-CONFIG_PKG_USING_LV_MUSIC_DEMO=y
-CONFIG_PKG_LV_MUSIC_DEMO_PATH="/packages/multimedia/LVGL/lv_music_demo"
-CONFIG_PKG_LV_MUSIC_DEMO_VER="v0.1.1"
+# CONFIG_PKG_USING_LV_MUSIC_DEMO is not set
+# CONFIG_PKG_USING_GUI_GUIDER_DEMO is not set
 
 #
 # u8g2: a monochrome graphic library
@@ -591,6 +597,8 @@ CONFIG_PKG_LV_MUSIC_DEMO_VER="v0.1.1"
 # CONFIG_PKG_USING_FDT is not set
 # CONFIG_PKG_USING_CBOX is not set
 # CONFIG_PKG_USING_SNOWFLAKE is not set
+# CONFIG_PKG_USING_HASH_MATCH is not set
+# CONFIG_PKG_USING_FIRE_PID_CURVE is not set
 
 #
 # system packages
@@ -622,6 +630,7 @@ CONFIG_PKG_LV_MUSIC_DEMO_VER="v0.1.1"
 # CMSIS: ARM Cortex-M Microcontroller Software Interface Standard
 #
 # CONFIG_PKG_USING_CMSIS_5 is not set
+# CONFIG_PKG_USING_CMSIS_RTOS1 is not set
 # CONFIG_PKG_USING_CMSIS_RTOS2 is not set
 
 #
@@ -668,6 +677,8 @@ CONFIG_PKG_RAMDISK_VER="latest"
 # CONFIG_PKG_USING_TINYUSB is not set
 # CONFIG_PKG_USING_CHERRYUSB is not set
 # CONFIG_PKG_USING_KMULTI_RTIMER is not set
+# CONFIG_PKG_USING_TFDB is not set
+# CONFIG_PKG_USING_QPC is not set
 
 #
 # peripheral libraries and drivers
@@ -822,6 +833,8 @@ CONFIG_PKG_RAMDISK_VER="latest"
 # CONFIG_PKG_USING_CONTROLLER is not set
 # CONFIG_PKG_USING_PHASE_LOCKED_LOOP is not set
 # CONFIG_PKG_USING_MFBD is not set
+# CONFIG_PKG_USING_SLCAN2RTT is not set
+# CONFIG_PKG_USING_SOEM is not set
 
 #
 # Hardware Drivers Config
@@ -858,6 +871,7 @@ CONFIG_BSP_USING_ETIMER2_CAPTURE=y
 CONFIG_BSP_USING_ETMR3=y
 # CONFIG_BSP_USING_ETIMER3 is not set
 CONFIG_BSP_USING_ETIMER3_CAPTURE=y
+# CONFIG_BSP_USING_FMINAND is not set
 CONFIG_BSP_USING_TMR=y
 CONFIG_BSP_USING_TIMER=y
 CONFIG_BSP_USING_TIMER0=y
@@ -937,12 +951,14 @@ CONFIG_BOARD_USING_LCM_FW070TFT_WVGA=y
 # CONFIG_BOARD_USING_LCM_FW070TFT_WSVGA is not set
 CONFIG_BOARD_USING_ADCTOUCH=y
 # CONFIG_BOARD_USING_GT911 is not set
+# CONFIG_BOARD_USING_FT5446 is not set
 
 #
 # Nuvoton Packages Config
 #
 CONFIG_NU_PKG_USING_UTILS=y
 # CONFIG_NU_PKG_USING_DEMO is not set
+# CONFIG_NU_PKG_USING_LVGL is not set
 # CONFIG_NU_PKG_USING_BMX055 is not set
 # CONFIG_NU_PKG_USING_MAX31875 is not set
 # CONFIG_NU_PKG_USING_NAU88L25 is not set
@@ -950,7 +966,10 @@ CONFIG_NU_PKG_USING_NAU8822=y
 # CONFIG_NU_PKG_USING_DA9062 is not set
 # CONFIG_NU_PKG_USING_ILI9341 is not set
 # CONFIG_NU_PKG_USING_SSD1963 is not set
+# CONFIG_NU_PKG_USING_FSA506 is not set
 # CONFIG_NU_PKG_USING_TPC is not set
 CONFIG_NU_PKG_USING_ADC_TOUCH=y
 # CONFIG_NU_PKG_USING_ADC_TOUCH_SW is not set
 # CONFIG_NU_PKG_USING_SPINAND is not set
+CONFIG_UTEST_CMD_PREFIX="bsp.nuvoton.utest."
+CONFIG_BOARD_USE_UTEST=y

bsp/nuvoton/nk-n9h30/applications/lvgl/lv_conf.h

@@ -5,7 +5,7 @@
  *
  * Change Logs:
  * Date           Author        Notes
- * 2021-10-18     Meco Man      First version
+ * 2022-6-1       Wayne Lin     First version
  */
 
 #ifndef LV_CONF_H
@@ -13,9 +13,19 @@
 
 #include "rtconfig.h"
 
-#define LV_VERSION_EQUAL(x,y,z) (x == LVGL_VERSION_MAJOR && y==LVGL_VERSION_MINOR  && z==LVGL_VERSION_PATCH )
+#if defined(SOC_SERIES_N9H30)
+    #define LV_USE_GPU_N9H30_GE2D           1
+    //#define LV_USE_ANTI_TEARING             1
+    //#define LV_DISP_DEF_REFR_PERIOD         16
+
+    #ifndef BIT31
+        #define BIT31    (0x80000000)       ///< Bit 31 mask of an 32 bit integer
+    #endif
 
-//#define LV_USE_GPU_N9H30_GE2D   1
+    #define IS_CACHEABLE_VRAM(addr)    !((uint32_t)addr & BIT31)
+#endif
+
+#define LV_VERSION_EQUAL(x,y,z) (x == LVGL_VERSION_MAJOR && y==LVGL_VERSION_MINOR  && z==LVGL_VERSION_PATCH )
 
 #define LV_COLOR_DEPTH                  BSP_LCD_BPP
 #define LV_HOR_RES_MAX                  BSP_LCD_WIDTH
@@ -24,14 +34,18 @@
 #define LV_FONT_MONTSERRAT_12           1
 #define LV_FONT_MONTSERRAT_16           1
 #define LV_USE_PERF_MONITOR             1
+//#define CONFIG_LV_LOG_LEVEL LV_LOG_LEVEL_TRACE
+
+//#define LV_USE_DEMO_RTT_MUSIC         1
+#if LV_USE_DEMO_RTT_MUSIC
+    #define LV_DEMO_RTT_MUSIC_AUTO_PLAY   1
 
-#if LV_VERSION_EQUAL(8, 1, 0)
-#define LV_USE_DEMO_RTT_MUSIC           1
-#define LV_DEMO_RTT_MUSIC_AUTO_PLAY     1
-#else
-#define LV_USE_DEMO_MUSIC           1
-#define LV_DEMO_MUSIC_AUTO_PLAY     1
+    #define LV_USE_DEMO_MUSIC             1
+    #define LV_DEMO_MUSIC_AUTO_PLAY       1
 #endif
 
-//#define CONFIG_LV_LOG_LEVEL LV_LOG_LEVEL_TRACE
+/* Please comment LV_USE_DEMO_RTT_MUSIC declaration before un-comment below */
+#define LV_USE_DEMO_WIDGETS         1
+//#define LV_USE_DEMO_BENCHMARK       1
+
 #endif

bsp/nuvoton/nk-n9h30/applications/lvgl/lv_demo.c

@@ -5,45 +5,28 @@
  *
  * Change Logs:
  * Date           Author        Notes
- * 2021-10-17     Meco Man      First version
+ * 2022-6-1       Wayne         First version
  */
-#include <rtthread.h>
+
 #include <lvgl.h>
-#define DBG_TAG    "LVGL"
-#define DBG_LVL    DBG_INFO
-#include <rtdbg.h>
 
-#ifndef LV_THREAD_STACK_SIZE
-    #define LV_THREAD_STACK_SIZE 4096
+void lv_user_gui_init(void)
+{
+    /* display demo; you may replace with your LVGL application at here and disable related definitions. */
+
+#if LV_USE_DEMO_BENCHMARK
+    extern void lv_demo_benchmark(void);
+    lv_demo_benchmark();
 #endif
 
-#ifndef LV_THREAD_PRIO
-    #define LV_THREAD_PRIO (RT_THREAD_PRIORITY_MAX*2/3)
+#if LV_USE_DEMO_WIDGETS
+    extern void lv_demo_widgets(void);
+    lv_demo_widgets();
 #endif
 
-static void lvgl_thread(void *parameter)
-{
+#if LV_USE_DEMO_MUSIC || LV_USE_DEMO_RTT_MUSIC
     extern void lv_demo_music(void);
     lv_demo_music();
+#endif
 
-    while (1)
-    {
-        lv_task_handler();
-        rt_thread_mdelay(1);
-    }
-}
-
-static int lvgl_demo_init(void)
-{
-    rt_thread_t tid;
-
-    tid = rt_thread_create("LVGL", lvgl_thread, RT_NULL, LV_THREAD_STACK_SIZE, LV_THREAD_PRIO, 10);
-    if (tid == RT_NULL)
-    {
-        LOG_E("Fail to create 'LVGL' thread");
-    }
-    rt_thread_startup(tid);
-
-    return 0;
 }
-INIT_APP_EXPORT(lvgl_demo_init);

bsp/nuvoton/nk-n9h30/applications/lvgl/lv_port_disp.c

@@ -11,6 +11,10 @@
 #include "nu_2d.h"
 #include "mmu.h"
 
+#if (LV_USE_GPU_N9H30_GE2D && LV_VERSION_CHECK(8, 2, 0))
+    #include "lv_gpu_n9h30_ge2d.h"
+#endif
+
 #define LOG_TAG             "lvgl.disp"
 #define DBG_ENABLE
 #define DBG_SECTION_NAME   LOG_TAG
@@ -48,34 +52,14 @@ static void nu_antitearing(lv_disp_draw_buf_t *draw_buf, lv_color_t *color_p)
     }
 }
 
-static void nu_flush_direct(lv_disp_drv_t *disp_drv, const lv_area_t *area, lv_color_t *color_p)
+static void nu_flush_full_refresh(lv_disp_drv_t *disp_drv, const lv_area_t *area, lv_color_t *color_p)
 {
-    void *pvDstReDraw;
+    if (IS_CACHEABLE_VRAM(color_p))
+        mmu_clean_dcache((uint32_t)color_p, disp_drv->draw_buf->size * sizeof(lv_color_t));
 
-#if (LV_USE_GPU_N9H30_GE2D==0)
-    mmu_clean_dcache((uint32_t)color_p, disp_drv->draw_buf->size * sizeof(lv_color_t));
-#endif
-
-    /* Use PANDISPLAY */
+    /* Use PANDISPLAY without H/W copying */
     rt_device_control(lcd_device, RTGRAPHIC_CTRL_PAN_DISPLAY, color_p);
 
-    /* Need to do on-/off- screen buffer synchronization. Here, we do a source-copying using GE2D engine. */
-    if (disp_drv->draw_buf->buf1 == color_p)
-        pvDstReDraw = disp_drv->draw_buf->buf2;
-    else
-        pvDstReDraw = disp_drv->draw_buf->buf1;
-
-    // Enter GE2D ->
-    ge2dInit(sizeof(lv_color_t) * 8, info.width, info.height, pvDstReDraw);
-    ge2dBitblt_SetAlphaMode(-1, 0, 0);
-    ge2dBitblt_SetDrawMode(-1, 0, 0);
-    ge2dSpriteBlt_Screen(0, 0, info.width, info.height, (void *)color_p);
-    // -> Leave GE2D
-
-#if (LV_USE_GPU_N9H30_GE2D==0)
-    mmu_invalidate_dcache((uint32_t)pvDstReDraw, disp_drv->draw_buf->size * sizeof(lv_color_t));
-#endif
-
     nu_antitearing(disp_drv->draw_buf, color_p);
 
     if (!u32FirstFlush)
@@ -88,33 +72,31 @@ static void nu_flush_direct(lv_disp_drv_t *disp_drv, const lv_area_t *area, lv_c
     lv_disp_flush_ready(disp_drv);
 }
 
-static void nu_flush_full_refresh(lv_disp_drv_t *disp_drv, const lv_area_t *area, lv_color_t *color_p)
+static void nu_flush(lv_disp_drv_t *disp_drv, const lv_area_t *area, lv_color_t *color_p)
 {
-#if (LV_USE_GPU_N9H30_GE2D==0)
-    mmu_clean_dcache((uint32_t)color_p, disp_drv->draw_buf->size * sizeof(lv_color_t));
-#endif
+#if (LV_USE_GPU_N9H30_GE2D==1)
+    lv_draw_sw_blend_dsc_t blend_flush = {0};
+    lv_draw_ctx_t draw_flush = {0};
+    lv_area_t flush_area = {0, 0, info.width - 1, info.height - 1 };
 
-    /* Use PANDISPLAY without H/W copying */
-    rt_device_control(lcd_device, RTGRAPHIC_CTRL_PAN_DISPLAY, color_p);
+    blend_flush.blend_area = area;
+    blend_flush.src_buf    = color_p;
+    blend_flush.mask_buf   = NULL;
+    blend_flush.opa        = LV_OPA_MAX;
+    blend_flush.blend_mode = LV_BLEND_MODE_NORMAL;
 
-    nu_antitearing(disp_drv->draw_buf, color_p);
+    draw_flush.buf         = info.framebuffer;
+    draw_flush.clip_area   = &flush_area;
+    draw_flush.buf_area    = &flush_area;
 
-    if (!u32FirstFlush)
-    {
-        /* Enable backlight at first flushing. */
-        rt_device_control(lcd_device, RTGRAPHIC_CTRL_POWERON, RT_NULL);
-        u32FirstFlush = 1;
-    }
+    lv_draw_n9h30_ge2d_blend(&draw_flush, (const lv_draw_sw_blend_dsc_t *)&blend_flush);
 
-    lv_disp_flush_ready(disp_drv);
-}
-
-static void nu_flush(lv_disp_drv_t *disp_drv, const lv_area_t *area, lv_color_t *color_p)
-{
+#else
     int32_t flush_area_w = lv_area_get_width(area);
     int32_t flush_area_h = lv_area_get_height(area);
 
-    //rt_kprintf("[%s %08x] %dx%d %d %d %d %d\n", __func__, color_p, flush_area_w, flush_area_h, area->x1, area->y1, area->x2, area->y2 );
+    //if ( flush_area_w&0x3 != 0 )
+    //    rt_kprintf("[%s %08x] %dx%d %d %d\n", __func__, color_p, flush_area_w, flush_area_h, area->x1, area->y1 );
 
     /* Update dirty region. */
     // Enter GE2D ->
@@ -124,6 +106,7 @@ static void nu_flush(lv_disp_drv_t *disp_drv, const lv_area_t *area, lv_color_t
 
     ge2dSpriteBlt_Screen(area->x1, area->y1, flush_area_w, flush_area_h, (void *)color_p);
     // -> Leave GE2D
+#endif
 
     if (!u32FirstFlush)
     {
@@ -142,7 +125,6 @@ static void nu_fill_cb(struct _lv_disp_drv_t *disp_drv, lv_color_t *dest_buf, lv
     int32_t fill_area_w = lv_area_get_width(fill_area);
     int32_t fill_area_h = lv_area_get_height(fill_area);
 
-    //rt_kprintf("[%s %08x] %dx%d %d %d %d %d\n", __func__, dest_buf, fill_area_w, fill_area_h, fill_area->x1, fill_area->y1, fill_area->x2, fill_area->y2 );
 
     if (lv_area_get_size(fill_area) < 3600)
     {
@@ -157,31 +139,22 @@ static void nu_fill_cb(struct _lv_disp_drv_t *disp_drv, lv_color_t *dest_buf, lv
     }
     else
     {
-#if (LV_USE_GPU_N9H30_GE2D==0)
-        mmu_clean_invalidated_dcache((uint32_t)dest_buf, disp_drv->draw_buf->size * sizeof(lv_color_t));
-#endif
+        //rt_kprintf("[blend_fill %d %08x] %dx%d %d %d\n", lv_area_get_size(fill_area), dest_buf, fill_area_w, fill_area_h, fill_area->x1, fill_area->y1 );
+
+        if (IS_CACHEABLE_VRAM(dest_buf))
+            mmu_clean_invalidated_dcache((uint32_t)dest_buf, sizeof(lv_color_t) * (dest_width * fill_area_h + fill_area_w));
 
         /*Hardware filling*/
-        if (disp_drv->direct_mode || disp_drv->full_refresh)
-        {
-            // Enter GE2D ->
-            ge2dInit(sizeof(lv_color_t) * 8, info.width, info.height, (void *)dest_buf);
-        }
-        else
-        {
-            // Enter GE2D ->
-            ge2dInit(sizeof(lv_color_t) * 8, fill_area_w, fill_area_h, (void *)dest_buf);
-        }
+        // Enter GE2D ->
+        ge2dInit(sizeof(lv_color_t) * 8, fill_area_w, fill_area_h, (void *)dest_buf);
 
         ge2dClip_SetClip(fill_area->x1, fill_area->y1, fill_area->x2, fill_area->y2);
+
         if (sizeof(lv_color_t) == 4)
-        {
             ge2dFill_Solid(fill_area->x1, fill_area->y1, fill_area_w, fill_area_h, color.full);
-        }
         else if (sizeof(lv_color_t) == 2)
-        {
             ge2dFill_Solid_RGB565(fill_area->x1, fill_area->y1, fill_area_w, fill_area_h, color.full);
-        }
+
         ge2dClip_SetClip(-1, 0, 0, 0);
         // -> Leave GE2D
     }
@@ -229,26 +202,22 @@ void lv_port_disp_init(void)
     disp_drv.ver_res = info.height;
     u32FBSize = info.height * info.width * (info.bits_per_pixel / 8);
 
-#if (LV_USE_GPU_N9H30_GE2D==0)
+#if (LV_USE_ANTI_TEARING==1)
     disp_drv.full_refresh = 1;
-    //disp_drv.direct_mode = 1;
 #endif
 
-    if (disp_drv.full_refresh || disp_drv.direct_mode)
+    if (disp_drv.full_refresh)
     {
 #if (LV_USE_GPU_N9H30_GE2D==1)
         buf1 = (void *)info.framebuffer;  // Use Non-cacheable VRAM
 #else
-        buf1 = (void *)((uint32_t)info.framebuffer & ~0x80000000); // Use Cacheable VRAM
+        buf1 = (void *)((uint32_t)info.framebuffer & ~BIT31); // Use Cacheable VRAM
 #endif
         buf2 = (void *)((uint32_t)buf1 + u32FBSize);
         buf3_next = (void *)((uint32_t)buf2 + u32FBSize);
-        rt_kprintf("LVGL: Use triple screen-sized buffers(%s) - buf1@%08x, buf2@%08x, buf3_next@%08x\n", (disp_drv.full_refresh == 1) ? "full_refresh" : "direct_mode", buf1, buf2, buf3_next);
+        rt_kprintf("LVGL: Use triple screen-sized buffers(full_refresh) - buf1@%08x, buf2@%08x, buf3_next@%08x\n", buf1, buf2, buf3_next);
 
-        if (disp_drv.direct_mode)
-            disp_drv.flush_cb = nu_flush_direct;
-        else
-            disp_drv.flush_cb = nu_flush_full_refresh;
+        disp_drv.flush_cb = nu_flush_full_refresh;
     }
     else
     {
@@ -278,6 +247,12 @@ void lv_port_disp_init(void)
     disp_drv.gpu_fill_cb = nu_fill_cb;
 #endif
 
+#if (LV_USE_GPU_N9H30_GE2D && LV_VERSION_CHECK(8, 2, 0))
+    disp_drv.draw_ctx_init = lv_draw_n9h30_ge2d_ctx_init;
+    disp_drv.draw_ctx_deinit = lv_draw_n9h30_ge2d_ctx_init;
+    disp_drv.draw_ctx_size = sizeof(lv_draw_n9h30_ge2d_ctx_t);
+#endif
+
     /*Called after every refresh cycle to tell the rendering and flushing time + the number of flushed pixels*/
     //disp_drv.monitor_cb = nu_perf_monitor;
 

bsp/nuvoton/nk-n9h30/applications/lvgl/lv_port_indev.c

@@ -31,15 +31,12 @@ void nu_touch_inputevent_cb(rt_int16_t x, rt_int16_t y, rt_uint8_t state)
     case RT_TOUCH_EVENT_UP:
         last_state = LV_INDEV_STATE_RELEASED;
         break;
+    case RT_TOUCH_EVENT_MOVE:
     case RT_TOUCH_EVENT_DOWN:
         last_x = x;
         last_y = y;
         last_state = LV_INDEV_STATE_PRESSED;
         break;
-    case RT_TOUCH_EVENT_MOVE:
-        last_x = x;
-        last_y = y;
-        break;
     }
 }
 

bsp/nuvoton/nk-n9h30/applications/mnt.c

@@ -58,6 +58,14 @@ const struct dfs_mount_tbl mount_table[] =
 #if defined(PKG_USING_RAMDISK)
     { RAMDISK_UDC, "/mnt/ram_usbd", "elm", 0, RT_NULL },
 #endif
+
+#if defined(BOARD_USING_STORAGE_SPIFLASH)
+    { PARTITION_NAME_FILESYSTEM, "/mnt/filesystem", "elm", 0, RT_NULL },
+#endif
+#if defined(PKG_USING_DFS_YAFFS)
+    { "nand1", "/mnt/fminand", "yaffs", 0, RT_NULL },
+#endif
+
     {0},
 };
 #endif
@@ -152,15 +160,41 @@ exit_mkdir_p:
     return ret;
 }
 
+#if defined(PKG_USING_DFS_YAFFS) && defined(RT_USING_DFS_MNTTABLE)
+#include "yaffs_guts.h"
+void yaffs_dev_init(void)
+{
+    int i;
+    for (i = 0; i < sizeof(mount_table) / sizeof(struct dfs_mount_tbl); i++)
+    {
+        if (mount_table[i].filesystemtype && !rt_strcmp(mount_table[i].filesystemtype, "yaffs"))
+        {
+            struct rt_mtd_nand_device *psMtdNandDev = RT_MTD_NAND_DEVICE(rt_device_find(mount_table[i].device_name));
+            if (psMtdNandDev)
+            {
+                yaffs_start_up(psMtdNandDev, (const char *)mount_table[i].path);
+            }
+        }
+    }
+}
+#endif
+
 /* Initialize the filesystem */
 int filesystem_init(void)
 {
     rt_err_t result = RT_EOK;
 
+#if defined(RT_USING_FAL)
+    extern int fal_init_check(void);
+    if (!fal_init_check())
+        fal_init();
+#endif
+
     // ramdisk as root
     if (!rt_device_find(RAMDISK_NAME))
     {
         LOG_E("cannot find %s device", RAMDISK_NAME);
+        result = -RT_ERROR;
         goto exit_filesystem_init;
     }
     else
@@ -179,6 +213,8 @@ int filesystem_init(void)
             mkdir_p("/cache", 0x777);
             mkdir_p("/download", 0x777);
             mkdir_p("/mnt/ram_usbd", 0x777);
+            mkdir_p("/mnt/filesystem", 0x777);
+            mkdir_p("/mnt/fminand", 0x777);
 #if defined(RT_USBH_MSTORAGE) && defined(UDISK_MOUNTPOINT)
             mkdir_p(UDISK_MOUNTPOINT, 0x777);
 #endif
@@ -202,44 +238,23 @@ int filesystem_init(void)
         RT_ASSERT(result == RT_EOK);
     }
 
-exit_filesystem_init:
-
-    return -result;
-}
-INIT_ENV_EXPORT(filesystem_init);
-#endif
-
 #if defined(BOARD_USING_STORAGE_SPIFLASH)
-int mnt_init_spiflash0(void)
-{
-#if defined(RT_USING_FAL)
-    extern int fal_init_check(void);
-    if (!fal_init_check())
-        fal_init();
-#endif
-    struct rt_device *psNorFlash = fal_blk_device_create(PARTITION_NAME_FILESYSTEM);
-    if (!psNorFlash)
-    {
-        rt_kprintf("Failed to create block device for %s.\n", PARTITION_NAME_FILESYSTEM);
-        goto exit_mnt_init_spiflash0;
-    }
-    else if (mkdir(MOUNT_POINT_SPIFLASH0, 0x777) < 0)
     {
-        rt_kprintf("Failed to make folder for %s.\n", MOUNT_POINT_SPIFLASH0);
-        goto exit_mnt_init_spiflash0;
-    }
-    else if (dfs_mount(psNorFlash->parent.name, MOUNT_POINT_SPIFLASH0, "elm", 0, 0) != 0)
-    {
-        rt_kprintf("Failed to mount elm on %s.\n", MOUNT_POINT_SPIFLASH0);
-        rt_kprintf("Try to execute 'mkfs -t elm %s' first, then reboot.\n", PARTITION_NAME_FILESYSTEM);
-        goto exit_mnt_init_spiflash0;
+        struct rt_device *psNorFlash = fal_blk_device_create(PARTITION_NAME_FILESYSTEM);
+        if (!psNorFlash)
+        {
+            rt_kprintf("Failed to create block device for %s.\n", PARTITION_NAME_FILESYSTEM);
+        }
     }
-    rt_kprintf("mount %s with elmfat type: ok\n", PARTITION_NAME_FILESYSTEM);
+#endif
+
+#if defined(PKG_USING_DFS_YAFFS) && defined(RT_USING_DFS_MNTTABLE)
+    yaffs_dev_init();
+#endif
 
-exit_mnt_init_spiflash0:
+exit_filesystem_init:
 
-    return 0;
+    return -result;
 }
-INIT_APP_EXPORT(mnt_init_spiflash0);
+INIT_ENV_EXPORT(filesystem_init);
 #endif
-

bsp/nuvoton/nk-n9h30/board/Kconfig

@@ -110,9 +110,20 @@ menu "Hardware Drivers Config"
                     bool "GT911 TSC"
                     select BSP_USING_I2C
                     select BSP_USING_I2C0
-                    select PKG_USING_GT911
+                    select NU_PKG_USING_TPC
+                    select NU_PKG_USING_TPC_GT911
                     help
                         Choose this option if you use GT911 external TSC touching function.
+
+                config BOARD_USING_FT5446
+                    bool "FT5446 TSC"
+                    select BSP_USING_I2C
+                    select BSP_USING_I2C0
+                    select NU_PKG_USING_TPC
+                    select NU_PKG_USING_TPC_FT5446
+                    help
+                        Choose this option if you use FT5446 external TSC touching function.
+
             endchoice
 
         endif

bsp/nuvoton/nk-n9h30/board/board.h

@@ -28,6 +28,12 @@
 #define BOARD_SDRAM_SIZE    0x04000000
 #define BOARD_HEAP_END      ((void*)BOARD_SDRAM_SIZE)
 
+#if defined(RT_USING_MTD_NAND)
+    #include <drivers/mtd_nand.h>
+    #define MTD_FMINAND_PARTITION_NUM 3
+    extern struct rt_mtd_nand_device mtd_partitions[MTD_FMINAND_PARTITION_NUM];
+#endif
+
 extern void rt_hw_board_init(void);
 extern void nu_clock_init(void);
 extern void nu_clock_deinit(void);

bsp/nuvoton/nk-n9h30/board/board_dev.c

@@ -12,16 +12,15 @@
 
 #include <rtconfig.h>
 #include <rtdevice.h>
+#include "board.h"
 
 #if defined(BOARD_USING_STORAGE_SPIFLASH)
-
-#include <drv_qspi.h>
-
 #if defined(RT_USING_SFUD)
     #include "spi_flash.h"
     #include "spi_flash_sfud.h"
 #endif
 
+#include "drv_qspi.h"
 
 #define W25X_REG_READSTATUS    (0x05)
 #define W25X_REG_READSTATUS2   (0x35)
@@ -150,6 +149,33 @@ static int rt_hw_spiflash_init(void)
 INIT_COMPONENT_EXPORT(rt_hw_spiflash_init);
 #endif /* BOARD_USING_STORAGE_SPIFLASH */
 
+#if defined(RT_USING_MTD_NAND) && defined(BSP_USING_FMINAND)
+struct rt_mtd_nand_device mtd_partitions[MTD_FMINAND_PARTITION_NUM] =
+{
+    [0] =
+    {
+        /*nand0: U-boot, env, rtthread*/
+        .block_start = 0,
+        .block_end   = 63,
+        .block_total = 64,
+    },
+    [1] =
+    {
+        /*nand1: for filesystem mounting*/
+        .block_start = 64,
+        .block_end   = 1023,
+        .block_total = 960,
+    },
+    [2] =
+    {
+        /*nand2: Whole blocks size, overlay*/
+        .block_start = 0,
+        .block_end   = 1023,
+        .block_total = 1024,
+    }
+};
+#endif
+
 #if defined(BOARD_USING_NAU8822) && defined(NU_PKG_USING_NAU8822)
 #include <acodec_nau8822.h>
 S_NU_NAU8822_CONFIG sCodecConfig =
@@ -173,33 +199,63 @@ int rt_hw_nau8822_port(void)
 INIT_COMPONENT_EXPORT(rt_hw_nau8822_port);
 #endif /* BOARD_USING_NAU8822 */
 
-//#if defined(BOARD_USING_GT911) && defined(PKG_USING_GT911)
-#if defined(PKG_USING_GT911)
+#if defined(NU_PKG_USING_ADC_TOUCH)
+#include "adc_touch.h"
+S_CALIBRATION_MATRIX g_sCalMat = { 13321, -53, -1069280, 96, 8461, -1863312, 65536 };
+#endif
+
+#if defined(NU_PKG_USING_TPC_GT911) && defined(BOARD_USING_GT911)
 #include "drv_gpio.h"
 #include "gt911.h"
 
-#define GT911_RST_PIN   NU_GET_PININDEX(NU_PG, 4)
-#define GT911_IRQ_PIN   NU_GET_PININDEX(NU_PG, 5)
+#define TPC_RST_PIN   NU_GET_PININDEX(NU_PG, 4)
+#define TPC_IRQ_PIN   NU_GET_PININDEX(NU_PG, 5)
 
-extern int gt911_sample(const char *name, rt_uint16_t x, rt_uint16_t y);
+extern int tpc_sample(const char *name);
 int rt_hw_gt911_port(void)
 {
     struct rt_touch_config cfg;
     rt_uint8_t rst_pin;
 
-    rst_pin = GT911_RST_PIN;
+    rst_pin = TPC_RST_PIN;
     cfg.dev_name = "i2c0";
-    cfg.irq_pin.pin = GT911_IRQ_PIN;
+    cfg.irq_pin.pin = TPC_IRQ_PIN;
     cfg.irq_pin.mode = PIN_MODE_INPUT_PULLDOWN;
     cfg.user_data = &rst_pin;
 
     rt_hw_gt911_init("gt911", &cfg);
-    gt911_sample("gt911", BSP_LCD_WIDTH, BSP_LCD_HEIGHT);
 
-    return 0;
+    return tpc_sample("gt911");
 }
 INIT_ENV_EXPORT(rt_hw_gt911_port);
-#endif /* if defined(BOARD_USING_GT911) && defined(PKG_USING_GT911) */
+#endif /* if defined(NU_PKG_USING_TPC_GT911) && defined(BOARD_USING_GT911) */
+
+#if defined(NU_PKG_USING_TPC_FT5446) && defined(BOARD_USING_FT5446)
+#include "drv_gpio.h"
+#include "ft5446.h"
+
+#define TPC_RST_PIN   NU_GET_PININDEX(NU_PG, 4)
+#define TPC_IRQ_PIN   NU_GET_PININDEX(NU_PG, 5)
+
+extern int tpc_sample(const char *name);
+int rt_hw_gt911_port(void)
+{
+    struct rt_touch_config cfg;
+    rt_uint8_t rst_pin;
+
+    rst_pin = TPC_RST_PIN;
+    cfg.dev_name = "i2c0";
+    cfg.irq_pin.pin = TPC_IRQ_PIN;
+    cfg.irq_pin.mode = PIN_MODE_INPUT;//PIN_MODE_INPUT_PULLDOWN;
+    cfg.user_data = &rst_pin;
+
+    rt_hw_ft5446_init("ft5446", &cfg);
+
+    return tpc_sample("ft5446");
+}
+INIT_ENV_EXPORT(rt_hw_gt911_port);
+#endif /* if defined(NU_PKG_USING_TPC_FT5446) && defined(BOARD_USING_FT5446) */
+
 
 #if defined(BOARD_USING_BUZZER)
 

bsp/nuvoton/nk-n9h30/board/nu_pin_init.c

@@ -123,9 +123,19 @@ static void nu_pin_vpost_init(void)
 
 static void nu_pin_fmi_init(void)
 {
-    /* NAND: PC[0, 14] */
-    outpw(REG_SYS_GPC_MFPL, 0x55555555);
-    outpw(REG_SYS_GPC_MFPH, 0x05555555);
+    /* select NAND function pins */
+    if (inpw(REG_SYS_PWRON) & 0x08000000)
+    {
+        /* NAND: PI[0, 14] */
+        outpw(REG_SYS_GPI_MFPL, 0x55555550);
+        outpw(REG_SYS_GPI_MFPH, 0x55555555);
+    }
+    else
+    {
+        /* NAND: PC[0, 14] */
+        outpw(REG_SYS_GPC_MFPL, 0x55555555);
+        outpw(REG_SYS_GPC_MFPH, 0x05555555);
+    }
 }
 
 static void nu_pin_usbh_init(void)

bsp/nuvoton/nk-rtu980/.config

@@ -692,6 +692,7 @@ CONFIG_PKG_RAMDISK_VER="latest"
 # CONFIG_PKG_USING_TINYUSB is not set
 # CONFIG_PKG_USING_CHERRYUSB is not set
 # CONFIG_PKG_USING_KMULTI_RTIMER is not set
+# CONFIG_PKG_USING_TFDB is not set
 
 #
 # peripheral libraries and drivers
@@ -967,3 +968,5 @@ CONFIG_NU_PKG_USING_DEMO=y
 # CONFIG_NU_PKG_USING_TPC is not set
 # CONFIG_NU_PKG_USING_ADC_TOUCH is not set
 # CONFIG_NU_PKG_USING_SPINAND is not set
+CONFIG_UTEST_CMD_PREFIX="bsp.nuvoton.utest."
+CONFIG_BOARD_USE_UTEST=y

bsp/nuvoton/numaker-iot-m487/.config

@@ -114,7 +114,7 @@ CONFIG_DFS_USING_WORKDIR=y
 CONFIG_DFS_FILESYSTEMS_MAX=8
 CONFIG_DFS_FILESYSTEM_TYPES_MAX=4
 CONFIG_DFS_FD_MAX=32
-# CONFIG_RT_USING_DFS_MNTTABLE is not set
+CONFIG_RT_USING_DFS_MNTTABLE=y
 CONFIG_RT_USING_DFS_ELMFAT=y
 
 #
@@ -184,7 +184,13 @@ CONFIG_PM_TICKLESS_THRESHOLD_TIME=2
 CONFIG_RT_USING_RTC=y
 # CONFIG_RT_USING_ALARM is not set
 # CONFIG_RT_USING_SOFT_RTC is not set
-# CONFIG_RT_USING_SDIO is not set
+CONFIG_RT_USING_SDIO=y
+CONFIG_RT_SDIO_STACK_SIZE=2048
+CONFIG_RT_SDIO_THREAD_PRIORITY=15
+CONFIG_RT_MMCSD_STACK_SIZE=2048
+CONFIG_RT_MMCSD_THREAD_PREORITY=22
+CONFIG_RT_MMCSD_MAX_PARTITION=16
+# CONFIG_RT_SDIO_DEBUG is not set
 CONFIG_RT_USING_SPI=y
 # CONFIG_RT_USING_SPI_BITOPS is not set
 CONFIG_RT_USING_QSPI=y
@@ -596,6 +602,7 @@ CONFIG_PKG_AT_DEVICE_VER_NUM=0x99999
 # CONFIG_PKG_USING_FDT is not set
 # CONFIG_PKG_USING_CBOX is not set
 # CONFIG_PKG_USING_SNOWFLAKE is not set
+# CONFIG_PKG_USING_HASH_MATCH is not set
 
 #
 # system packages
@@ -669,6 +676,7 @@ CONFIG_PKG_AT_DEVICE_VER_NUM=0x99999
 # CONFIG_PKG_USING_TINYUSB is not set
 # CONFIG_PKG_USING_CHERRYUSB is not set
 # CONFIG_PKG_USING_KMULTI_RTIMER is not set
+# CONFIG_PKG_USING_TFDB is not set
 
 #
 # peripheral libraries and drivers
@@ -881,9 +889,6 @@ CONFIG_BSP_USING_UUART0_RX_DMA=y
 CONFIG_BSP_USING_SDH=y
 CONFIG_BSP_USING_SDH0=y
 # CONFIG_BSP_USING_SDH1 is not set
-CONFIG_NU_SDH_USING_PDMA=y
-CONFIG_NU_SDH_HOTPLUG=y
-# CONFIG_NU_SDH_MOUNT_ON_ROOT is not set
 # CONFIG_BSP_USING_CAN is not set
 # CONFIG_BSP_USING_BPWM is not set
 # CONFIG_BSP_USING_EPWM is not set
@@ -966,3 +971,5 @@ CONFIG_NU_PKG_USING_NAU88L25=y
 # CONFIG_NU_PKG_USING_TPC is not set
 # CONFIG_NU_PKG_USING_ADC_TOUCH is not set
 # CONFIG_NU_PKG_USING_SPINAND is not set
+CONFIG_UTEST_CMD_PREFIX="bsp.nuvoton.utest."
+CONFIG_BOARD_USE_UTEST=y

bsp/nuvoton/numaker-iot-m487/applications/lvgl/lv_conf.h

@@ -11,17 +11,27 @@
 #ifndef LV_CONF_H
 #define LV_CONF_H
 
-#define LV_USE_PERF_MONITOR     1
-#define LV_COLOR_DEPTH          16
+#include "rtconfig.h"
 
-#define LV_HOR_RES_MAX          (320)
-#define LV_VER_RES_MAX          (240)
+#define LV_COLOR_DEPTH                  BSP_LCD_BPP
+#define LV_HOR_RES_MAX                  BSP_LCD_WIDTH
+#define LV_VER_RES_MAX                  BSP_LCD_HEIGHT
 
 #define LV_FONT_MONTSERRAT_12           1
 #define LV_FONT_MONTSERRAT_16           1
-//#define LV_USE_DEMO_BENCHMARK           1
-#define LV_USE_DEMO_WIDGETS             1
-#define LV_DEMO_WIDGETS_SLIDESHOW       1
-
+#define LV_USE_PERF_MONITOR             1
 //#define CONFIG_LV_LOG_LEVEL LV_LOG_LEVEL_TRACE
+
+//#define LV_USE_DEMO_RTT_MUSIC         1
+#if LV_USE_DEMO_RTT_MUSIC
+    #define LV_DEMO_RTT_MUSIC_AUTO_PLAY   1
+
+    #define LV_USE_DEMO_MUSIC             1
+    #define LV_DEMO_MUSIC_AUTO_PLAY       1
+#endif
+
+/* Please comment LV_USE_DEMO_RTT_MUSIC declaration before un-comment below */
+#define LV_USE_DEMO_WIDGETS         1
+//#define LV_USE_DEMO_BENCHMARK       1
+
 #endif

bsp/nuvoton/numaker-iot-m487/applications/lvgl/lv_demo.c

@@ -5,50 +5,28 @@
  *
  * Change Logs:
  * Date           Author        Notes
- * 2021-10-17     Meco Man      First version
+ * 2022-6-1       Wayne         First version
  */
-#include <rtthread.h>
-#include <lvgl.h>
-#define DBG_TAG    "LVGL"
-#define DBG_LVL    DBG_INFO
-#include <rtdbg.h>
-
-#ifndef LV_THREAD_STACK_SIZE
-    #define LV_THREAD_STACK_SIZE 4096
-#endif
 
-#ifndef LV_THREAD_PRIO
-    #define LV_THREAD_PRIO (RT_THREAD_PRIORITY_MAX*2/3)
-#endif
+#include <lvgl.h>
 
-static void lvgl_thread(void *parameter)
+void lv_user_gui_init(void)
 {
+    /* display demo; you may replace with your LVGL application at here and disable related definitions. */
+
 #if LV_USE_DEMO_BENCHMARK
     extern void lv_demo_benchmark(void);
     lv_demo_benchmark();
 #endif
+
 #if LV_USE_DEMO_WIDGETS
     extern void lv_demo_widgets(void);
     lv_demo_widgets();
 #endif
-    while (1)
-    {
-        lv_task_handler();
-        rt_thread_mdelay(1);
-    }
-}
 
-static int lvgl_demo_init(void)
-{
-    rt_thread_t tid;
-
-    tid = rt_thread_create("LVGL", lvgl_thread, RT_NULL, LV_THREAD_STACK_SIZE, LV_THREAD_PRIO, 10);
-    if (tid == RT_NULL)
-    {
-        LOG_E("Fail to create 'LVGL' thread");
-    }
-    rt_thread_startup(tid);
+#if LV_USE_DEMO_MUSIC || LV_USE_DEMO_RTT_MUSIC
+    extern void lv_demo_music(void);
+    lv_demo_music();
+#endif
 
-    return 0;
 }
-INIT_APP_EXPORT(lvgl_demo_init);

bsp/nuvoton/numaker-iot-m487/applications/lvgl/lv_port_indev.c

@@ -31,15 +31,12 @@ void nu_touch_inputevent_cb(rt_int16_t x, rt_int16_t y, rt_uint8_t state)
     case RT_TOUCH_EVENT_UP:
         last_state = LV_INDEV_STATE_RELEASED;
         break;
+    case RT_TOUCH_EVENT_MOVE:
     case RT_TOUCH_EVENT_DOWN:
         last_x = x;
         last_y = y;
         last_state = LV_INDEV_STATE_PRESSED;
         break;
-    case RT_TOUCH_EVENT_MOVE:
-        last_x = x;
-        last_y = y;
-        break;
     }
 }
 

bsp/nuvoton/numaker-iot-m487/applications/mnt.c

@@ -12,6 +12,13 @@
 
 #include <rtthread.h>
 
+#define LOG_TAG         "mnt"
+#define DBG_ENABLE
+#define DBG_SECTION_NAME "mnt"
+#define DBG_LEVEL DBG_ERROR
+#define DBG_COLOR
+#include <rtdbg.h>
+
 #include <dfs_fs.h>
 #include <dfs_file.h>
 #include <unistd.h>
@@ -27,6 +34,29 @@
     #define MOUNT_POINT_SPIFLASH0 "/"
 #endif
 
+#ifdef RT_USING_DFS_MNTTABLE
+
+/*
+const char   *device_name;
+const char   *path;
+const char   *filesystemtype;
+unsigned long rwflag;
+const void   *data;
+*/
+
+const struct dfs_mount_tbl mount_table[] =
+{
+    { "sd0", "/mnt/sd0", "elm", 0, RT_NULL },
+    { "sd0p0", "/mnt/sd0p0", "elm", 0, RT_NULL },
+    { "sd0p1", "/mnt/sd0p1", "elm", 0, RT_NULL },
+    { "sd1", "/mnt/sd1", "elm", 0, RT_NULL },
+    { "sd1p0", "/mnt/sd1p0", "elm", 0, RT_NULL },
+    { "sd1p1", "/mnt/sd1p1", "elm", 0, RT_NULL },
+    {0},
+};
+#endif
+
+
 #if defined(BOARD_USING_STORAGE_SPIFLASH)
 
 #if defined(RT_USB_DEVICE_MSTORAGE)
@@ -107,6 +137,7 @@ exit_mkdir_p:
 
     return ret;
 }
+
 #endif
 
 int mnt_init_spiflash0(void)
@@ -118,6 +149,12 @@ int mnt_init_spiflash0(void)
         goto exit_mnt_init_spiflash0;
     }
     rt_kprintf("mount flash0 with elmfat type: ok\n");
+    mkdir_p("/mnt/sd0", 0x777);
+    mkdir_p("/mnt/sd0p0", 0x777);
+    mkdir_p("/mnt/sd0p1", 0x777);
+    mkdir_p("/mnt/sd1", 0x777);
+    mkdir_p("/mnt/sd1p0", 0x777);
+    mkdir_p("/mnt/sd1p1", 0x777);
 
 #if defined(RT_USBH_MSTORAGE) && defined(UDISK_MOUNTPOINT)
     if (mkdir_p(UDISK_MOUNTPOINT, 0) < 0)
@@ -133,3 +170,4 @@ exit_mnt_init_spiflash0:
 #endif
 INIT_ENV_EXPORT(mnt_init_spiflash0);
 #endif
+

bsp/nuvoton/numaker-iot-m487/board/Kconfig

@@ -119,8 +119,6 @@ menu "Hardware Drivers Config"
             select NU_PKG_USING_ILI9341_SPI
             select NU_PKG_ILI9341_WITH_OFFSCREEN_FRAMEBUFFER
             select NU_PKG_ILI9341_HORIZONTAL
-            select PKG_USING_LVGL
-            select PKG_USING_LVGL_DEMOS
             default n
 
         if BOARD_USING_LCD_ILI9341

bsp/nuvoton/numaker-iot-m487/board/NuClockConfig/nutool_modclkcfg.c

@@ -561,7 +561,7 @@ void nutool_modclkcfg_deinit_sc2(void)
 void nutool_modclkcfg_init_sdh0(void)
 {
     CLK_EnableModuleClock(SDH0_MODULE);
-    CLK_SetModuleClock(SDH0_MODULE, CLK_CLKSEL0_SDH0SEL_HCLK, CLK_CLKDIV0_SDH0(1));
+    CLK_SetModuleClock(SDH0_MODULE, CLK_CLKSEL0_SDH0SEL_HCLK, CLK_CLKDIV0_SDH0(4));
 
     return;
 }

bsp/nuvoton/numaker-iot-m487/config_lvgl

@@ -29,7 +29,7 @@ CONFIG_IDLE_THREAD_STACK_SIZE=1024
 # CONFIG_RT_KSERVICE_USING_STDLIB is not set
 # CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
 # CONFIG_RT_USING_TINY_FFS is not set
-# CONFIG_RT_PRINTF_LONGLONG is not set
+# CONFIG_RT_KPRINTF_USING_LONGLONG is not set
 CONFIG_RT_DEBUG=y
 CONFIG_RT_DEBUG_COLOR=y
 # CONFIG_RT_DEBUG_INIT_CONFIG is not set
@@ -78,7 +78,7 @@ CONFIG_RT_USING_DEVICE=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=256
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart0"
-CONFIG_RT_VER_NUM=0x40100
+CONFIG_RT_VER_NUM=0x40101
 CONFIG_ARCH_ARM=y
 CONFIG_RT_USING_CPU_FFS=y
 CONFIG_ARCH_ARM_CORTEX_M=y
@@ -93,17 +93,8 @@ CONFIG_RT_USING_USER_MAIN=y
 CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
 CONFIG_RT_MAIN_THREAD_PRIORITY=10
 # CONFIG_RT_USING_LEGACY is not set
-
-#
-# C++ features
-#
-# CONFIG_RT_USING_CPLUSPLUS is not set
-
-#
-# Command shell
-#
-CONFIG_RT_USING_FINSH=y
 CONFIG_RT_USING_MSH=y
+CONFIG_RT_USING_FINSH=y
 CONFIG_FINSH_USING_MSH=y
 CONFIG_FINSH_THREAD_NAME="tshell"
 CONFIG_FINSH_THREAD_PRIORITY=20
@@ -117,10 +108,6 @@ CONFIG_FINSH_USING_DESCRIPTION=y
 # CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
 # CONFIG_FINSH_USING_AUTH is not set
 CONFIG_FINSH_ARG_MAX=10
-
-#
-# Device virtual file system
-#
 CONFIG_RT_USING_DFS=y
 CONFIG_DFS_USING_POSIX=y
 CONFIG_DFS_USING_WORKDIR=y
@@ -154,6 +141,8 @@ CONFIG_RT_DFS_ELM_MUTEX_TIMEOUT=3000
 CONFIG_RT_USING_DFS_DEVFS=y
 # CONFIG_RT_USING_DFS_ROMFS is not set
 # CONFIG_RT_USING_DFS_RAMFS is not set
+# CONFIG_RT_USING_FAL is not set
+# CONFIG_RT_USING_LWP is not set
 
 #
 # Device Drivers
@@ -193,6 +182,7 @@ CONFIG_RT_USING_RTC=y
 # CONFIG_RT_USING_SOFT_RTC is not set
 # CONFIG_RT_USING_SDIO is not set
 CONFIG_RT_USING_SPI=y
+# CONFIG_RT_USING_SPI_BITOPS is not set
 CONFIG_RT_USING_QSPI=y
 # CONFIG_RT_USING_SPI_MSD is not set
 CONFIG_RT_USING_SFUD=y
@@ -275,7 +265,7 @@ CONFIG_RT_USB_DEVICE_HID_MOUSE=y
 # CONFIG_RT_USB_DEVICE_HID_MEDIA is not set
 
 #
-# POSIX layer and C standard library
+# C/C++ and POSIX layer
 #
 CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 
@@ -287,6 +277,7 @@ CONFIG_RT_USING_POSIX_DEVIO=y
 # CONFIG_RT_USING_POSIX_STDIO is not set
 CONFIG_RT_USING_POSIX_POLL=y
 CONFIG_RT_USING_POSIX_SELECT=y
+# CONFIG_RT_USING_POSIX_SOCKET is not set
 # CONFIG_RT_USING_POSIX_TERMIOS is not set
 # CONFIG_RT_USING_POSIX_AIO is not set
 # CONFIG_RT_USING_POSIX_MMAN is not set
@@ -306,36 +297,16 @@ CONFIG_RT_USING_POSIX_SELECT=y
 #
 # Socket is in the 'Network' category
 #
+# CONFIG_RT_USING_CPLUSPLUS is not set
 
 #
 # Network
 #
-
-#
-# Socket abstraction layer
-#
 # CONFIG_RT_USING_SAL is not set
-
-#
-# Network interface device
-#
 # CONFIG_RT_USING_NETDEV is not set
-
-#
-# light weight TCP/IP stack
-#
 # CONFIG_RT_USING_LWIP is not set
-
-#
-# AT commands
-#
 # CONFIG_RT_USING_AT is not set
 
-#
-# VBUS(Virtual Software BUS)
-#
-# CONFIG_RT_USING_VBUS is not set
-
 #
 # Utilities
 #
@@ -346,7 +317,7 @@ CONFIG_UTEST_THR_STACK_SIZE=4096
 CONFIG_UTEST_THR_PRIORITY=20
 # CONFIG_RT_USING_VAR_EXPORT is not set
 # CONFIG_RT_USING_RT_LINK is not set
-# CONFIG_RT_USING_LWP is not set
+# CONFIG_RT_USING_VBUS is not set
 
 #
 # RT-Thread Utestcases
@@ -360,6 +331,7 @@ CONFIG_UTEST_THR_PRIORITY=20
 #
 # IoT - internet of things
 #
+# CONFIG_PKG_USING_LWIP is not set
 # CONFIG_PKG_USING_LORAWAN_DRIVER is not set
 # CONFIG_PKG_USING_PAHOMQTT is not set
 # CONFIG_PKG_USING_UMQTT is not set
@@ -370,12 +342,8 @@ CONFIG_UTEST_THR_PRIORITY=20
 # CONFIG_PKG_USING_KAWAII_MQTT is not set
 # CONFIG_PKG_USING_BC28_MQTT is not set
 # CONFIG_PKG_USING_WEBTERMINAL is not set
-# CONFIG_PKG_USING_CJSON is not set
-# CONFIG_PKG_USING_JSMN is not set
 # CONFIG_PKG_USING_LIBMODBUS is not set
 # CONFIG_PKG_USING_FREEMODBUS is not set
-# CONFIG_PKG_USING_LJSON is not set
-# CONFIG_PKG_USING_EZXML is not set
 # CONFIG_PKG_USING_NANOPB is not set
 
 #
@@ -414,6 +382,7 @@ CONFIG_UTEST_THR_PRIORITY=20
 # CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set
 # CONFIG_PKG_USING_JOYLINK is not set
 # CONFIG_PKG_USING_EZ_IOT_OS is not set
+# CONFIG_PKG_USING_IOTSHARP_SDK is not set
 # CONFIG_PKG_USING_NIMBLE is not set
 # CONFIG_PKG_USING_LLSYNC_SDK_ADAPTER is not set
 # CONFIG_PKG_USING_OTA_DOWNLOADER is not set
@@ -429,16 +398,13 @@ CONFIG_UTEST_THR_PRIORITY=20
 # CONFIG_PKG_USING_ABUP_FOTA is not set
 # CONFIG_PKG_USING_LIBCURL2RTT is not set
 # CONFIG_PKG_USING_CAPNP is not set
-# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
 # CONFIG_PKG_USING_AGILE_TELNET is not set
 # CONFIG_PKG_USING_NMEALIB is not set
-# CONFIG_PKG_USING_AGILE_JSMN is not set
 # CONFIG_PKG_USING_PDULIB is not set
 # CONFIG_PKG_USING_BTSTACK is not set
 # CONFIG_PKG_USING_LORAWAN_ED_STACK is not set
 # CONFIG_PKG_USING_WAYZ_IOTKIT is not set
 # CONFIG_PKG_USING_MAVLINK is not set
-# CONFIG_PKG_USING_RAPIDJSON is not set
 # CONFIG_PKG_USING_BSAL is not set
 # CONFIG_PKG_USING_AGILE_MODBUS is not set
 # CONFIG_PKG_USING_AGILE_FTP is not set
@@ -450,12 +416,14 @@ CONFIG_UTEST_THR_PRIORITY=20
 # CONFIG_PKG_USING_HM is not set
 # CONFIG_PKG_USING_SMALL_MODBUS is not set
 # CONFIG_PKG_USING_NET_SERVER is not set
+# CONFIG_PKG_USING_ZFTP is not set
 
 #
 # security packages
 #
 # CONFIG_PKG_USING_MBEDTLS is not set
 # CONFIG_PKG_USING_LIBSODIUM is not set
+# CONFIG_PKG_USING_LIBHYDROGEN is not set
 # CONFIG_PKG_USING_TINYCRYPT is not set
 # CONFIG_PKG_USING_TFM is not set
 # CONFIG_PKG_USING_YD_CRYPTO is not set
@@ -463,11 +431,28 @@ CONFIG_UTEST_THR_PRIORITY=20
 #
 # language packages
 #
+
+#
+# JSON: JavaScript Object Notation, a lightweight data-interchange format
+#
+# CONFIG_PKG_USING_CJSON is not set
+# CONFIG_PKG_USING_LJSON is not set
+# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
+# CONFIG_PKG_USING_RAPIDJSON is not set
+# CONFIG_PKG_USING_JSMN is not set
+# CONFIG_PKG_USING_AGILE_JSMN is not set
+
+#
+# XML: Extensible Markup Language
+#
+# CONFIG_PKG_USING_SIMPLE_XML is not set
+# CONFIG_PKG_USING_EZXML is not set
 # CONFIG_PKG_USING_LUATOS_SOC is not set
 # CONFIG_PKG_USING_LUA is not set
 # CONFIG_PKG_USING_JERRYSCRIPT is not set
 # CONFIG_PKG_USING_MICROPYTHON is not set
 # CONFIG_PKG_USING_PIKASCRIPT is not set
+# CONFIG_PKG_USING_RTT_RUST is not set
 
 #
 # multimedia packages
@@ -478,15 +463,16 @@ CONFIG_UTEST_THR_PRIORITY=20
 #
 CONFIG_PKG_USING_LVGL=y
 CONFIG_PKG_LVGL_PATH="/packages/multimedia/LVGL/LVGL"
-# CONFIG_PKG_USING_LVGL_EXAMPLES is not set
-CONFIG_PKG_USING_LVGL_DEMOS=y
-CONFIG_PKG_USING_LVGL_V820=y
-# CONFIG_PKG_USING_LVGL_V810 is not set
-# CONFIG_PKG_USING_LVGL_LATEST_VERSION is not set
-CONFIG_PKG_LVGL_VER="v8.2.0"
-CONFIG_PKG_LVGL_VER_NUM=0x08020
+CONFIG_PKG_LVGL_THREAD_PRIO=20
+CONFIG_PKG_LVGL_THREAD_STACK_SIZE=4096
+CONFIG_PKG_LVGL_DISP_REFR_PERIOD=30
+# CONFIG_PKG_LVGL_USING_EXAMPLES is not set
+CONFIG_PKG_LVGL_USING_DEMOS=y
+CONFIG_PKG_LVGL_VER_NUM=0x99999
+CONFIG_PKG_LVGL_VER="latest"
 # CONFIG_PKG_USING_LITTLEVGL2RTT is not set
 # CONFIG_PKG_USING_LV_MUSIC_DEMO is not set
+# CONFIG_PKG_USING_GUI_GUIDER_DEMO is not set
 
 #
 # u8g2: a monochrome graphic library
@@ -516,6 +502,8 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # CONFIG_PKG_USING_TERMBOX is not set
 # CONFIG_PKG_USING_VT100 is not set
 # CONFIG_PKG_USING_QRCODE is not set
+# CONFIG_PKG_USING_GUIENGINE is not set
+# CONFIG_PKG_USING_PERSIMMON is not set
 
 #
 # tools packages
@@ -558,6 +546,10 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # CONFIG_PKG_USING_SOLAR_TERMS is not set
 # CONFIG_PKG_USING_GAN_ZHI is not set
 # CONFIG_PKG_USING_FDT is not set
+# CONFIG_PKG_USING_CBOX is not set
+# CONFIG_PKG_USING_SNOWFLAKE is not set
+# CONFIG_PKG_USING_HASH_MATCH is not set
+# CONFIG_PKG_USING_FIRE_PID_CURVE is not set
 
 #
 # system packages
@@ -589,6 +581,7 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # CMSIS: ARM Cortex-M Microcontroller Software Interface Standard
 #
 # CONFIG_PKG_USING_CMSIS_5 is not set
+# CONFIG_PKG_USING_CMSIS_RTOS1 is not set
 # CONFIG_PKG_USING_CMSIS_RTOS2 is not set
 
 #
@@ -600,13 +593,10 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # CONFIG_PKG_USING_UC_CLK is not set
 # CONFIG_PKG_USING_UC_COMMON is not set
 # CONFIG_PKG_USING_UC_MODBUS is not set
-# CONFIG_RT_USING_ARDUINO is not set
-# CONFIG_PKG_USING_GUIENGINE is not set
-# CONFIG_PKG_USING_PERSIMMON is not set
+# CONFIG_PKG_USING_RTDUINO is not set
 # CONFIG_PKG_USING_CAIRO is not set
 # CONFIG_PKG_USING_PIXMAN is not set
 # CONFIG_PKG_USING_PARTITION is not set
-# CONFIG_PKG_USING_FAL is not set
 # CONFIG_PKG_USING_FLASHDB is not set
 # CONFIG_PKG_USING_SQLITE is not set
 # CONFIG_PKG_USING_RTI is not set
@@ -633,6 +623,9 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # CONFIG_PKG_USING_MCUBOOT is not set
 # CONFIG_PKG_USING_TINYUSB is not set
 # CONFIG_PKG_USING_CHERRYUSB is not set
+# CONFIG_PKG_USING_KMULTI_RTIMER is not set
+# CONFIG_PKG_USING_TFDB is not set
+# CONFIG_PKG_USING_QPC is not set
 
 #
 # peripheral libraries and drivers
@@ -656,6 +649,7 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # CONFIG_PKG_USING_WM_LIBRARIES is not set
 # CONFIG_PKG_USING_KENDRYTE_SDK is not set
 # CONFIG_PKG_USING_INFRARED is not set
+# CONFIG_PKG_USING_MULTI_INFRARED is not set
 # CONFIG_PKG_USING_AGILE_BUTTON is not set
 # CONFIG_PKG_USING_AGILE_LED is not set
 # CONFIG_PKG_USING_AT24CXX is not set
@@ -712,6 +706,7 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # CONFIG_PKG_USING_SOFT_SERIAL is not set
 # CONFIG_PKG_USING_MB85RS16 is not set
 # CONFIG_PKG_USING_CW2015 is not set
+# CONFIG_PKG_USING_RFM300 is not set
 
 #
 # AI packages
@@ -730,6 +725,10 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # miscellaneous packages
 #
 
+#
+# project laboratory
+#
+
 #
 # samples: kernel and components samples
 #
@@ -780,6 +779,9 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # CONFIG_PKG_USING_DESIGN_PATTERN is not set
 # CONFIG_PKG_USING_CONTROLLER is not set
 # CONFIG_PKG_USING_PHASE_LOCKED_LOOP is not set
+# CONFIG_PKG_USING_MFBD is not set
+# CONFIG_PKG_USING_SLCAN2RTT is not set
+# CONFIG_PKG_USING_SOEM is not set
 
 #
 # Hardware Drivers Config
@@ -897,6 +899,7 @@ CONFIG_BOARD_USING_ILI9341_PIN_DC=18
 #
 CONFIG_NU_PKG_USING_UTILS=y
 # CONFIG_NU_PKG_USING_DEMO is not set
+# CONFIG_NU_PKG_USING_LVGL is not set
 # CONFIG_NU_PKG_USING_BMX055 is not set
 # CONFIG_NU_PKG_USING_MAX31875 is not set
 # CONFIG_NU_PKG_USING_NAU88L25 is not set
@@ -912,8 +915,11 @@ CONFIG_NU_PKG_ILI9341_HORIZONTAL=y
 CONFIG_BSP_LCD_BPP=16
 CONFIG_BSP_LCD_WIDTH=320
 CONFIG_BSP_LCD_HEIGHT=240
+# CONFIG_NU_PKG_USING_SSD1963 is not set
+# CONFIG_NU_PKG_USING_FSA506 is not set
+# CONFIG_NU_PKG_USING_TPC is not set
 CONFIG_NU_PKG_USING_ADC_TOUCH=y
 CONFIG_NU_PKG_USING_ADC_TOUCH_SW=y
 # CONFIG_NU_PKG_USING_SPINAND is not set
+CONFIG_UTEST_CMD_PREFIX="bsp.nuvoton.utest."
 CONFIG_BOARD_USE_UTEST=y
-CONFIG_UTEST_CMD_PREFIX="bsp.nuvoton.numaker-iot-m487.test.utest."

bsp/nuvoton/numaker-iot-m487/template.uvprojx

@@ -15,8 +15,8 @@
         <TargetCommonOption>
           <Device>M487JIDAE</Device>
           <Vendor>Nuvoton</Vendor>
-          <PackID>Nuvoton.NuMicro_DFP.1.3.5</PackID>
-          <PackURL>http://www.nuvoton.com/hq/enu/Documents/KEILSoftwarePack</PackURL>
+          <PackID>Nuvoton.NuMicro_DFP.1.3.13</PackID>
+          <PackURL>https://github.com/OpenNuvoton/cmsis-packs/raw/master/</PackURL>
           <Cpu>IRAM(0x20000000,0x28000) IROM(0x00000000,0x80000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000)</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -136,7 +136,7 @@
             <DriverSelection>4103</DriverSelection>
           </Flash1>
           <bUseTDR>1</bUseTDR>
-          <Flash2>NULink\Nu_Link.dll</Flash2>
+          <Flash2>BIN\UL2CM3.DLL</Flash2>
           <Flash3>"" ()</Flash3>
           <Flash4></Flash4>
           <pFcarmOut></pFcarmOut>
@@ -311,7 +311,7 @@
           </ArmAdsMisc>
           <Cads>
             <interw>1</interw>
-            <Optim>1</Optim>
+            <Optim>3</Optim>
             <oTime>0</oTime>
             <SplitLS>0</SplitLS>
             <OneElfS>0</OneElfS>

bsp/nuvoton/numaker-m032ki/.config

@@ -427,6 +427,7 @@ CONFIG_UTEST_SMALL_MEM_TC=y
 # CONFIG_PKG_USING_TERMBOX is not set
 # CONFIG_PKG_USING_VT100 is not set
 # CONFIG_PKG_USING_QRCODE is not set
+# CONFIG_PKG_USING_GUIENGINE is not set
 
 #
 # tools packages
@@ -514,7 +515,6 @@ CONFIG_UTEST_SMALL_MEM_TC=y
 # CONFIG_PKG_USING_UC_COMMON is not set
 # CONFIG_PKG_USING_UC_MODBUS is not set
 # CONFIG_PKG_USING_RTDUINO is not set
-# CONFIG_PKG_USING_GUIENGINE is not set
 # CONFIG_PKG_USING_CAIRO is not set
 # CONFIG_PKG_USING_PIXMAN is not set
 # CONFIG_PKG_USING_PARTITION is not set
@@ -545,6 +545,7 @@ CONFIG_UTEST_SMALL_MEM_TC=y
 # CONFIG_PKG_USING_TINYUSB is not set
 # CONFIG_PKG_USING_CHERRYUSB is not set
 # CONFIG_PKG_USING_KMULTI_RTIMER is not set
+# CONFIG_PKG_USING_TFDB is not set
 
 #
 # peripheral libraries and drivers
@@ -795,3 +796,5 @@ CONFIG_NU_PKG_USING_DEMO=y
 # CONFIG_NU_PKG_USING_TPC is not set
 # CONFIG_NU_PKG_USING_ADC_TOUCH is not set
 # CONFIG_NU_PKG_USING_SPINAND is not set
+CONFIG_UTEST_CMD_PREFIX="bsp.nuvoton.utest."
+CONFIG_BOARD_USE_UTEST=y

bsp/nuvoton/numaker-m032ki/applications/lvgl/lv_conf.h

@@ -11,17 +11,27 @@
 #ifndef LV_CONF_H
 #define LV_CONF_H
 
-#define LV_USE_PERF_MONITOR     1
-#define LV_COLOR_DEPTH          16
+#include "rtconfig.h"
 
-#define LV_HOR_RES_MAX          (320)
-#define LV_VER_RES_MAX          (240)
+#define LV_COLOR_DEPTH                  BSP_LCD_BPP
+#define LV_HOR_RES_MAX                  BSP_LCD_WIDTH
+#define LV_VER_RES_MAX                  BSP_LCD_HEIGHT
 
 #define LV_FONT_MONTSERRAT_12           1
 #define LV_FONT_MONTSERRAT_16           1
-//#define LV_USE_DEMO_BENCHMARK           1
-#define LV_USE_DEMO_WIDGETS             1
-#define LV_DEMO_WIDGETS_SLIDESHOW       1
-
+#define LV_USE_PERF_MONITOR             1
 //#define CONFIG_LV_LOG_LEVEL LV_LOG_LEVEL_TRACE
+
+//#define LV_USE_DEMO_RTT_MUSIC         1
+#if LV_USE_DEMO_RTT_MUSIC
+    #define LV_DEMO_RTT_MUSIC_AUTO_PLAY   1
+
+    #define LV_USE_DEMO_MUSIC             1
+    #define LV_DEMO_MUSIC_AUTO_PLAY       1
+#endif
+
+/* Please comment LV_USE_DEMO_RTT_MUSIC declaration before un-comment below */
+#define LV_USE_DEMO_WIDGETS         1
+//#define LV_USE_DEMO_BENCHMARK       1
+
 #endif

bsp/nuvoton/numaker-m032ki/applications/lvgl/lv_demo.c

@@ -5,50 +5,28 @@
  *
  * Change Logs:
  * Date           Author        Notes
- * 2021-10-17     Meco Man      First version
+ * 2022-6-1       Wayne         First version
  */
-#include <rtthread.h>
-#include <lvgl.h>
-#define DBG_TAG    "LVGL"
-#define DBG_LVL    DBG_INFO
-#include <rtdbg.h>
-
-#ifndef LV_THREAD_STACK_SIZE
-    #define LV_THREAD_STACK_SIZE 4096
-#endif
 
-#ifndef LV_THREAD_PRIO
-    #define LV_THREAD_PRIO (RT_THREAD_PRIORITY_MAX*2/3)
-#endif
+#include <lvgl.h>
 
-static void lvgl_thread(void *parameter)
+void lv_user_gui_init(void)
 {
+    /* display demo; you may replace with your LVGL application at here and disable related definitions. */
+
 #if LV_USE_DEMO_BENCHMARK
     extern void lv_demo_benchmark(void);
     lv_demo_benchmark();
 #endif
+
 #if LV_USE_DEMO_WIDGETS
     extern void lv_demo_widgets(void);
     lv_demo_widgets();
 #endif
-    while (1)
-    {
-        lv_task_handler();
-        rt_thread_mdelay(1);
-    }
-}
 
-static int lvgl_demo_init(void)
-{
-    rt_thread_t tid;
-
-    tid = rt_thread_create("LVGL", lvgl_thread, RT_NULL, LV_THREAD_STACK_SIZE, LV_THREAD_PRIO, 10);
-    if (tid == RT_NULL)
-    {
-        LOG_E("Fail to create 'LVGL' thread");
-    }
-    rt_thread_startup(tid);
+#if LV_USE_DEMO_MUSIC || LV_USE_DEMO_RTT_MUSIC
+    extern void lv_demo_music(void);
+    lv_demo_music();
+#endif
 
-    return 0;
 }
-INIT_APP_EXPORT(lvgl_demo_init);

bsp/nuvoton/numaker-m032ki/applications/lvgl/lv_port_indev.c

@@ -31,15 +31,12 @@ void nu_touch_inputevent_cb(rt_int16_t x, rt_int16_t y, rt_uint8_t state)
     case RT_TOUCH_EVENT_UP:
         last_state = LV_INDEV_STATE_RELEASED;
         break;
+    case RT_TOUCH_EVENT_MOVE:
     case RT_TOUCH_EVENT_DOWN:
         last_x = x;
         last_y = y;
         last_state = LV_INDEV_STATE_PRESSED;
         break;
-    case RT_TOUCH_EVENT_MOVE:
-        last_x = x;
-        last_y = y;
-        break;
     }
 }
 

bsp/nuvoton/numaker-m032ki/board/Kconfig

@@ -35,8 +35,6 @@ menu "Hardware Drivers Config"
             select NU_PKG_USING_ILI9341_SPI
             select NU_PKG_ILI9341_WITH_OFFSCREEN_FRAMEBUFFER
             select NU_PKG_ILI9341_HORIZONTAL
-            select PKG_USING_LVGL
-            select PKG_USING_LVGL_DEMOS
             default n
 
         if BOARD_USING_LCD_ILI9341

bsp/nuvoton/numaker-m032ki/config_lvgl

@@ -31,7 +31,7 @@ CONFIG_RT_TIMER_THREAD_STACK_SIZE=512
 # CONFIG_RT_KSERVICE_USING_STDLIB is not set
 # CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
 # CONFIG_RT_USING_TINY_FFS is not set
-# CONFIG_RT_PRINTF_LONGLONG is not set
+# CONFIG_RT_KPRINTF_USING_LONGLONG is not set
 CONFIG_RT_DEBUG=y
 # CONFIG_RT_DEBUG_COLOR is not set
 # CONFIG_RT_DEBUG_INIT_CONFIG is not set
@@ -80,7 +80,7 @@ CONFIG_RT_USING_DEVICE=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=256
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart0"
-CONFIG_RT_VER_NUM=0x40100
+CONFIG_RT_VER_NUM=0x40101
 CONFIG_ARCH_ARM=y
 # CONFIG_RT_USING_CPU_FFS is not set
 CONFIG_ARCH_ARM_CORTEX_M=y
@@ -95,17 +95,8 @@ CONFIG_RT_USING_USER_MAIN=y
 CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
 CONFIG_RT_MAIN_THREAD_PRIORITY=10
 # CONFIG_RT_USING_LEGACY is not set
-
-#
-# C++ features
-#
-# CONFIG_RT_USING_CPLUSPLUS is not set
-
-#
-# Command shell
-#
-CONFIG_RT_USING_FINSH=y
 CONFIG_RT_USING_MSH=y
+CONFIG_RT_USING_FINSH=y
 CONFIG_FINSH_USING_MSH=y
 CONFIG_FINSH_THREAD_NAME="tshell"
 CONFIG_FINSH_THREAD_PRIORITY=20
@@ -119,10 +110,6 @@ CONFIG_FINSH_USING_DESCRIPTION=y
 # CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
 # CONFIG_FINSH_USING_AUTH is not set
 CONFIG_FINSH_ARG_MAX=10
-
-#
-# Device virtual file system
-#
 CONFIG_RT_USING_DFS=y
 CONFIG_DFS_USING_POSIX=y
 CONFIG_DFS_USING_WORKDIR=y
@@ -134,6 +121,8 @@ CONFIG_DFS_FD_MAX=16
 CONFIG_RT_USING_DFS_DEVFS=y
 # CONFIG_RT_USING_DFS_ROMFS is not set
 # CONFIG_RT_USING_DFS_RAMFS is not set
+# CONFIG_RT_USING_FAL is not set
+# CONFIG_RT_USING_LWP is not set
 
 #
 # Device Drivers
@@ -167,6 +156,7 @@ CONFIG_RT_USING_RTC=y
 # CONFIG_RT_USING_SOFT_RTC is not set
 # CONFIG_RT_USING_SDIO is not set
 CONFIG_RT_USING_SPI=y
+# CONFIG_RT_USING_SPI_BITOPS is not set
 # CONFIG_RT_USING_QSPI is not set
 # CONFIG_RT_USING_SPI_MSD is not set
 # CONFIG_RT_USING_SFUD is not set
@@ -190,7 +180,7 @@ CONFIG_RT_USING_TOUCH=y
 # CONFIG_RT_USING_USB_DEVICE is not set
 
 #
-# POSIX layer and C standard library
+# C/C++ and POSIX layer
 #
 CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 
@@ -214,36 +204,16 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 #
 # Socket is in the 'Network' category
 #
+# CONFIG_RT_USING_CPLUSPLUS is not set
 
 #
 # Network
 #
-
-#
-# Socket abstraction layer
-#
 # CONFIG_RT_USING_SAL is not set
-
-#
-# Network interface device
-#
 # CONFIG_RT_USING_NETDEV is not set
-
-#
-# light weight TCP/IP stack
-#
 # CONFIG_RT_USING_LWIP is not set
-
-#
-# AT commands
-#
 # CONFIG_RT_USING_AT is not set
 
-#
-# VBUS(Virtual Software BUS)
-#
-# CONFIG_RT_USING_VBUS is not set
-
 #
 # Utilities
 #
@@ -254,7 +224,7 @@ CONFIG_UTEST_THR_STACK_SIZE=4096
 CONFIG_UTEST_THR_PRIORITY=20
 # CONFIG_RT_USING_VAR_EXPORT is not set
 # CONFIG_RT_USING_RT_LINK is not set
-# CONFIG_RT_USING_LWP is not set
+# CONFIG_RT_USING_VBUS is not set
 
 #
 # RT-Thread Utestcases
@@ -280,6 +250,11 @@ CONFIG_UTEST_SMALL_MEM_TC=y
 # CONFIG_UTEST_MAILBOX_TC is not set
 # CONFIG_UTEST_THREAD_TC is not set
 
+#
+# CPP11 Testcase
+#
+# CONFIG_UTEST_CPP11_THREAD_TC is not set
+
 #
 # Utest Serial Testcase
 #
@@ -292,6 +267,7 @@ CONFIG_UTEST_SMALL_MEM_TC=y
 #
 # IoT - internet of things
 #
+# CONFIG_PKG_USING_LWIP is not set
 # CONFIG_PKG_USING_LORAWAN_DRIVER is not set
 # CONFIG_PKG_USING_PAHOMQTT is not set
 # CONFIG_PKG_USING_UMQTT is not set
@@ -302,12 +278,8 @@ CONFIG_UTEST_SMALL_MEM_TC=y
 # CONFIG_PKG_USING_KAWAII_MQTT is not set
 # CONFIG_PKG_USING_BC28_MQTT is not set
 # CONFIG_PKG_USING_WEBTERMINAL is not set
-# CONFIG_PKG_USING_CJSON is not set
-# CONFIG_PKG_USING_JSMN is not set
 # CONFIG_PKG_USING_LIBMODBUS is not set
 # CONFIG_PKG_USING_FREEMODBUS is not set
-# CONFIG_PKG_USING_LJSON is not set
-# CONFIG_PKG_USING_EZXML is not set
 # CONFIG_PKG_USING_NANOPB is not set
 
 #
@@ -346,6 +318,7 @@ CONFIG_UTEST_SMALL_MEM_TC=y
 # CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set
 # CONFIG_PKG_USING_JOYLINK is not set
 # CONFIG_PKG_USING_EZ_IOT_OS is not set
+# CONFIG_PKG_USING_IOTSHARP_SDK is not set
 # CONFIG_PKG_USING_NIMBLE is not set
 # CONFIG_PKG_USING_LLSYNC_SDK_ADAPTER is not set
 # CONFIG_PKG_USING_OTA_DOWNLOADER is not set
@@ -361,16 +334,13 @@ CONFIG_UTEST_SMALL_MEM_TC=y
 # CONFIG_PKG_USING_ABUP_FOTA is not set
 # CONFIG_PKG_USING_LIBCURL2RTT is not set
 # CONFIG_PKG_USING_CAPNP is not set
-# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
 # CONFIG_PKG_USING_AGILE_TELNET is not set
 # CONFIG_PKG_USING_NMEALIB is not set
-# CONFIG_PKG_USING_AGILE_JSMN is not set
 # CONFIG_PKG_USING_PDULIB is not set
 # CONFIG_PKG_USING_BTSTACK is not set
 # CONFIG_PKG_USING_LORAWAN_ED_STACK is not set
 # CONFIG_PKG_USING_WAYZ_IOTKIT is not set
 # CONFIG_PKG_USING_MAVLINK is not set
-# CONFIG_PKG_USING_RAPIDJSON is not set
 # CONFIG_PKG_USING_BSAL is not set
 # CONFIG_PKG_USING_AGILE_MODBUS is not set
 # CONFIG_PKG_USING_AGILE_FTP is not set
@@ -382,12 +352,14 @@ CONFIG_UTEST_SMALL_MEM_TC=y
 # CONFIG_PKG_USING_HM is not set
 # CONFIG_PKG_USING_SMALL_MODBUS is not set
 # CONFIG_PKG_USING_NET_SERVER is not set
+# CONFIG_PKG_USING_ZFTP is not set
 
 #
 # security packages
 #
 # CONFIG_PKG_USING_MBEDTLS is not set
 # CONFIG_PKG_USING_LIBSODIUM is not set
+# CONFIG_PKG_USING_LIBHYDROGEN is not set
 # CONFIG_PKG_USING_TINYCRYPT is not set
 # CONFIG_PKG_USING_TFM is not set
 # CONFIG_PKG_USING_YD_CRYPTO is not set
@@ -395,11 +367,28 @@ CONFIG_UTEST_SMALL_MEM_TC=y
 #
 # language packages
 #
+
+#
+# JSON: JavaScript Object Notation, a lightweight data-interchange format
+#
+# CONFIG_PKG_USING_CJSON is not set
+# CONFIG_PKG_USING_LJSON is not set
+# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
+# CONFIG_PKG_USING_RAPIDJSON is not set
+# CONFIG_PKG_USING_JSMN is not set
+# CONFIG_PKG_USING_AGILE_JSMN is not set
+
+#
+# XML: Extensible Markup Language
+#
+# CONFIG_PKG_USING_SIMPLE_XML is not set
+# CONFIG_PKG_USING_EZXML is not set
 # CONFIG_PKG_USING_LUATOS_SOC is not set
 # CONFIG_PKG_USING_LUA is not set
 # CONFIG_PKG_USING_JERRYSCRIPT is not set
 # CONFIG_PKG_USING_MICROPYTHON is not set
 # CONFIG_PKG_USING_PIKASCRIPT is not set
+# CONFIG_PKG_USING_RTT_RUST is not set
 
 #
 # multimedia packages
@@ -410,15 +399,16 @@ CONFIG_UTEST_SMALL_MEM_TC=y
 #
 CONFIG_PKG_USING_LVGL=y
 CONFIG_PKG_LVGL_PATH="/packages/multimedia/LVGL/LVGL"
-# CONFIG_PKG_USING_LVGL_EXAMPLES is not set
-CONFIG_PKG_USING_LVGL_DEMOS=y
-CONFIG_PKG_USING_LVGL_V820=y
-# CONFIG_PKG_USING_LVGL_V810 is not set
-# CONFIG_PKG_USING_LVGL_LATEST_VERSION is not set
-CONFIG_PKG_LVGL_VER="v8.2.0"
-CONFIG_PKG_LVGL_VER_NUM=0x08020
+CONFIG_PKG_LVGL_THREAD_PRIO=20
+CONFIG_PKG_LVGL_THREAD_STACK_SIZE=4096
+CONFIG_PKG_LVGL_DISP_REFR_PERIOD=30
+# CONFIG_PKG_LVGL_USING_EXAMPLES is not set
+CONFIG_PKG_LVGL_USING_DEMOS=y
+CONFIG_PKG_LVGL_VER_NUM=0x99999
+CONFIG_PKG_LVGL_VER="latest"
 # CONFIG_PKG_USING_LITTLEVGL2RTT is not set
 # CONFIG_PKG_USING_LV_MUSIC_DEMO is not set
+# CONFIG_PKG_USING_GUI_GUIDER_DEMO is not set
 
 #
 # u8g2: a monochrome graphic library
@@ -448,6 +438,7 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # CONFIG_PKG_USING_TERMBOX is not set
 # CONFIG_PKG_USING_VT100 is not set
 # CONFIG_PKG_USING_QRCODE is not set
+# CONFIG_PKG_USING_GUIENGINE is not set
 
 #
 # tools packages
@@ -490,6 +481,10 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # CONFIG_PKG_USING_SOLAR_TERMS is not set
 # CONFIG_PKG_USING_GAN_ZHI is not set
 # CONFIG_PKG_USING_FDT is not set
+# CONFIG_PKG_USING_CBOX is not set
+# CONFIG_PKG_USING_SNOWFLAKE is not set
+# CONFIG_PKG_USING_HASH_MATCH is not set
+# CONFIG_PKG_USING_FIRE_PID_CURVE is not set
 
 #
 # system packages
@@ -521,6 +516,7 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # CMSIS: ARM Cortex-M Microcontroller Software Interface Standard
 #
 # CONFIG_PKG_USING_CMSIS_5 is not set
+# CONFIG_PKG_USING_CMSIS_RTOS1 is not set
 # CONFIG_PKG_USING_CMSIS_RTOS2 is not set
 
 #
@@ -532,12 +528,10 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # CONFIG_PKG_USING_UC_CLK is not set
 # CONFIG_PKG_USING_UC_COMMON is not set
 # CONFIG_PKG_USING_UC_MODBUS is not set
-# CONFIG_RT_USING_ARDUINO is not set
-# CONFIG_PKG_USING_GUIENGINE is not set
+# CONFIG_PKG_USING_RTDUINO is not set
 # CONFIG_PKG_USING_CAIRO is not set
 # CONFIG_PKG_USING_PIXMAN is not set
 # CONFIG_PKG_USING_PARTITION is not set
-# CONFIG_PKG_USING_FAL is not set
 # CONFIG_PKG_USING_FLASHDB is not set
 # CONFIG_PKG_USING_SQLITE is not set
 # CONFIG_PKG_USING_RTI is not set
@@ -564,6 +558,9 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # CONFIG_PKG_USING_MCUBOOT is not set
 # CONFIG_PKG_USING_TINYUSB is not set
 # CONFIG_PKG_USING_CHERRYUSB is not set
+# CONFIG_PKG_USING_KMULTI_RTIMER is not set
+# CONFIG_PKG_USING_TFDB is not set
+# CONFIG_PKG_USING_QPC is not set
 
 #
 # peripheral libraries and drivers
@@ -587,6 +584,7 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # CONFIG_PKG_USING_WM_LIBRARIES is not set
 # CONFIG_PKG_USING_KENDRYTE_SDK is not set
 # CONFIG_PKG_USING_INFRARED is not set
+# CONFIG_PKG_USING_MULTI_INFRARED is not set
 # CONFIG_PKG_USING_AGILE_BUTTON is not set
 # CONFIG_PKG_USING_AGILE_LED is not set
 # CONFIG_PKG_USING_AT24CXX is not set
@@ -643,6 +641,7 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # CONFIG_PKG_USING_SOFT_SERIAL is not set
 # CONFIG_PKG_USING_MB85RS16 is not set
 # CONFIG_PKG_USING_CW2015 is not set
+# CONFIG_PKG_USING_RFM300 is not set
 
 #
 # AI packages
@@ -661,6 +660,10 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # miscellaneous packages
 #
 
+#
+# project laboratory
+#
+
 #
 # samples: kernel and components samples
 #
@@ -711,6 +714,9 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # CONFIG_PKG_USING_DESIGN_PATTERN is not set
 # CONFIG_PKG_USING_CONTROLLER is not set
 # CONFIG_PKG_USING_PHASE_LOCKED_LOOP is not set
+# CONFIG_PKG_USING_MFBD is not set
+# CONFIG_PKG_USING_SLCAN2RTT is not set
+# CONFIG_PKG_USING_SOEM is not set
 
 #
 # Hardware Drivers Config
@@ -813,6 +819,7 @@ CONFIG_BOARD_USING_ILI9341_PIN_DC=18
 #
 CONFIG_NU_PKG_USING_UTILS=y
 # CONFIG_NU_PKG_USING_DEMO is not set
+# CONFIG_NU_PKG_USING_LVGL is not set
 # CONFIG_NU_PKG_USING_BMX055 is not set
 # CONFIG_NU_PKG_USING_MAX31875 is not set
 # CONFIG_NU_PKG_USING_NAU88L25 is not set
@@ -828,8 +835,11 @@ CONFIG_NU_PKG_ILI9341_HORIZONTAL=y
 CONFIG_BSP_LCD_BPP=16
 CONFIG_BSP_LCD_WIDTH=320
 CONFIG_BSP_LCD_HEIGHT=240
+# CONFIG_NU_PKG_USING_SSD1963 is not set
+# CONFIG_NU_PKG_USING_FSA506 is not set
+# CONFIG_NU_PKG_USING_TPC is not set
 CONFIG_NU_PKG_USING_ADC_TOUCH=y
 CONFIG_NU_PKG_USING_ADC_TOUCH_SW=y
 # CONFIG_NU_PKG_USING_SPINAND is not set
+CONFIG_UTEST_CMD_PREFIX="bsp.nuvoton.utest."
 CONFIG_BOARD_USE_UTEST=y
-CONFIG_UTEST_CMD_PREFIX="bsp.nuvoton.numaker-m032ki.test.utest."

bsp/nuvoton/numaker-m2354/.config

@@ -111,7 +111,7 @@ CONFIG_DFS_USING_WORKDIR=y
 CONFIG_DFS_FILESYSTEMS_MAX=4
 CONFIG_DFS_FILESYSTEM_TYPES_MAX=4
 CONFIG_DFS_FD_MAX=32
-# CONFIG_RT_USING_DFS_MNTTABLE is not set
+CONFIG_RT_USING_DFS_MNTTABLE=y
 CONFIG_RT_USING_DFS_ELMFAT=y
 
 #
@@ -180,7 +180,13 @@ CONFIG_PM_TICKLESS_THRESHOLD_TIME=2
 CONFIG_RT_USING_RTC=y
 # CONFIG_RT_USING_ALARM is not set
 # CONFIG_RT_USING_SOFT_RTC is not set
-# CONFIG_RT_USING_SDIO is not set
+CONFIG_RT_USING_SDIO=y
+CONFIG_RT_SDIO_STACK_SIZE=2048
+CONFIG_RT_SDIO_THREAD_PRIORITY=15
+CONFIG_RT_MMCSD_STACK_SIZE=2048
+CONFIG_RT_MMCSD_THREAD_PREORITY=22
+CONFIG_RT_MMCSD_MAX_PARTITION=16
+CONFIG_RT_SDIO_DEBUG=y
 CONFIG_RT_USING_SPI=y
 # CONFIG_RT_USING_SPI_BITOPS is not set
 CONFIG_RT_USING_QSPI=y
@@ -591,6 +597,7 @@ CONFIG_PKG_AT_DEVICE_VER_NUM=0x99999
 # CONFIG_PKG_USING_FDT is not set
 # CONFIG_PKG_USING_CBOX is not set
 # CONFIG_PKG_USING_SNOWFLAKE is not set
+# CONFIG_PKG_USING_HASH_MATCH is not set
 
 #
 # system packages
@@ -664,6 +671,7 @@ CONFIG_PKG_AT_DEVICE_VER_NUM=0x99999
 # CONFIG_PKG_USING_TINYUSB is not set
 # CONFIG_PKG_USING_CHERRYUSB is not set
 # CONFIG_PKG_USING_KMULTI_RTIMER is not set
+# CONFIG_PKG_USING_TFDB is not set
 
 #
 # peripheral libraries and drivers
@@ -866,9 +874,7 @@ CONFIG_BSP_USING_I2C1=y
 # CONFIG_BSP_USING_USCI is not set
 CONFIG_BSP_USING_SDH=y
 CONFIG_BSP_USING_SDH0=y
-CONFIG_NU_SDH_USING_PDMA=y
-CONFIG_NU_SDH_HOTPLUG=y
-CONFIG_NU_SDH_MOUNT_ON_ROOT=y
+# CONFIG_BSP_USING_SDH1 is not set
 # CONFIG_BSP_USING_CAN is not set
 # CONFIG_BSP_USING_BPWM is not set
 # CONFIG_BSP_USING_EPWM is not set
@@ -940,3 +946,5 @@ CONFIG_NU_PKG_USING_DEMO=y
 # CONFIG_NU_PKG_USING_TPC is not set
 # CONFIG_NU_PKG_USING_ADC_TOUCH is not set
 # CONFIG_NU_PKG_USING_SPINAND is not set
+CONFIG_UTEST_CMD_PREFIX="bsp.nuvoton.utest."
+CONFIG_BOARD_USE_UTEST=y

bsp/nuvoton/numaker-m2354/applications/lvgl/lv_conf.h

@@ -5,22 +5,33 @@
  *
  * Change Logs:
  * Date           Author        Notes
- * 2021-10-18     Meco Man      First version
+ * 2022-2-17      Wayne         First version
  */
 
 #ifndef LV_CONF_H
 #define LV_CONF_H
 
-#define LV_USE_PERF_MONITOR     1
-#define LV_COLOR_DEPTH          16
+#include "rtconfig.h"
 
-#define LV_HOR_RES_MAX          (320)
-#define LV_VER_RES_MAX          (240)
+#define LV_COLOR_DEPTH                  BSP_LCD_BPP
+#define LV_HOR_RES_MAX                  BSP_LCD_WIDTH
+#define LV_VER_RES_MAX                  BSP_LCD_HEIGHT
 
 #define LV_FONT_MONTSERRAT_12           1
 #define LV_FONT_MONTSERRAT_16           1
-#define LV_USE_DEMO_RTT_MUSIC           1
-#define LV_DEMO_RTT_MUSIC_AUTO_PLAY     1
-
+#define LV_USE_PERF_MONITOR             1
 //#define CONFIG_LV_LOG_LEVEL LV_LOG_LEVEL_TRACE
+
+//#define LV_USE_DEMO_RTT_MUSIC         1
+#if LV_USE_DEMO_RTT_MUSIC
+    #define LV_DEMO_RTT_MUSIC_AUTO_PLAY   1
+
+    #define LV_USE_DEMO_MUSIC             1
+    #define LV_DEMO_MUSIC_AUTO_PLAY       1
+#endif
+
+/* Please comment LV_USE_DEMO_RTT_MUSIC declaration before un-comment below */
+#define LV_USE_DEMO_WIDGETS         1
+//#define LV_USE_DEMO_BENCHMARK       1
+
 #endif

bsp/nuvoton/numaker-m2354/applications/lvgl/lv_demo.c

@@ -5,45 +5,28 @@
  *
  * Change Logs:
  * Date           Author        Notes
- * 2021-10-17     Meco Man      First version
+ * 2022-6-1       Wayne         First version
  */
-#include <rtthread.h>
+
 #include <lvgl.h>
-#define DBG_TAG    "LVGL"
-#define DBG_LVL    DBG_INFO
-#include <rtdbg.h>
 
-#ifndef LV_THREAD_STACK_SIZE
-    #define LV_THREAD_STACK_SIZE 4096
+void lv_user_gui_init(void)
+{
+    /* display demo; you may replace with your LVGL application at here and disable related definitions. */
+
+#if LV_USE_DEMO_BENCHMARK
+    extern void lv_demo_benchmark(void);
+    lv_demo_benchmark();
 #endif
 
-#ifndef LV_THREAD_PRIO
-    #define LV_THREAD_PRIO (RT_THREAD_PRIORITY_MAX*2/3)
+#if LV_USE_DEMO_WIDGETS
+    extern void lv_demo_widgets(void);
+    lv_demo_widgets();
 #endif
 
-static void lvgl_thread(void *parameter)
-{
+#if LV_USE_DEMO_MUSIC || LV_USE_DEMO_RTT_MUSIC
     extern void lv_demo_music(void);
     lv_demo_music();
+#endif
 
-    while (1)
-    {
-        lv_task_handler();
-        rt_thread_mdelay(1);
-    }
-}
-
-static int lvgl_demo_init(void)
-{
-    rt_thread_t tid;
-
-    tid = rt_thread_create("LVGL", lvgl_thread, RT_NULL, LV_THREAD_STACK_SIZE, LV_THREAD_PRIO, 10);
-    if (tid == RT_NULL)
-    {
-        LOG_E("Fail to create 'LVGL' thread");
-    }
-    rt_thread_startup(tid);
-
-    return 0;
 }
-INIT_APP_EXPORT(lvgl_demo_init);

bsp/nuvoton/numaker-m2354/applications/lvgl/lv_port_disp.c

@@ -70,7 +70,7 @@ void lv_port_disp_init(void)
     rt_kprintf("LVGL: Use one buffers - buf1@%08x, size: %d bytes\n", buf1, info.smem_len);
 
     /*Initialize `disp_buf` with the buffer(s).*/
-    lv_disp_draw_buf_init(&disp_buf, buf1, RT_NULL, info.smem_len/(info.bits_per_pixel/8));
+    lv_disp_draw_buf_init(&disp_buf, buf1, RT_NULL, info.smem_len / (info.bits_per_pixel / 8));
 
     result = rt_device_open(lcd_device, 0);
     if (result != RT_EOK)

bsp/nuvoton/numaker-m2354/applications/lvgl/lv_port_indev.c

@@ -31,15 +31,12 @@ void nu_touch_inputevent_cb(rt_int16_t x, rt_int16_t y, rt_uint8_t state)
     case RT_TOUCH_EVENT_UP:
         last_state = LV_INDEV_STATE_RELEASED;
         break;
+    case RT_TOUCH_EVENT_MOVE:
     case RT_TOUCH_EVENT_DOWN:
         last_x = x;
         last_y = y;
         last_state = LV_INDEV_STATE_PRESSED;
         break;
-    case RT_TOUCH_EVENT_MOVE:
-        last_x = x;
-        last_y = y;
-        break;
     }
 }
 

bsp/nuvoton/numaker-m2354/applications/mnt.c

@@ -10,3 +10,36 @@
 *
 ******************************************************************************/
 
+#include <rtthread.h>
+
+#define LOG_TAG         "mnt"
+#define DBG_ENABLE
+#define DBG_SECTION_NAME "mnt"
+#define DBG_LEVEL DBG_ERROR
+#define DBG_COLOR
+#include <rtdbg.h>
+
+#include <dfs_fs.h>
+#include <dfs_file.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <sys/stat.h>
+#include <sys/statfs.h>
+
+#ifdef RT_USING_DFS_MNTTABLE
+
+/*
+const char   *device_name;
+const char   *path;
+const char   *filesystemtype;
+unsigned long rwflag;
+const void   *data;
+*/
+
+const struct dfs_mount_tbl mount_table[] =
+{
+    { "sd0", "/", "elm", 0, RT_NULL },
+    {0},
+};
+#endif
+

bsp/nuvoton/numaker-m2354/board/Kconfig

@@ -73,8 +73,6 @@ menu "Hardware Drivers Config"
             select NU_PKG_USING_ILI9341_SPI
             select NU_PKG_ILI9341_WITH_OFFSCREEN_FRAMEBUFFER
             select NU_PKG_ILI9341_HORIZONTAL
-            select PKG_USING_LVGL
-            select PKG_USING_LV_MUSIC_DEMO
             default n
 
         if BOARD_USING_LCD_ILI9341

bsp/nuvoton/numaker-m2354/board/NuClockConfig/nutool_modclkcfg.c

@@ -718,7 +718,7 @@ void nutool_modclkcfg_deinit_sc2(void)
 void nutool_modclkcfg_init_sdh0(void)
 {
     CLK_EnableModuleClock(SDH0_MODULE);
-    CLK_SetModuleClock(SDH0_MODULE, CLK_CLKSEL0_SDH0SEL_HCLK, CLK_CLKDIV0_SDH0(1));
+    CLK_SetModuleClock(SDH0_MODULE, CLK_CLKSEL0_SDH0SEL_HCLK, CLK_CLKDIV0_SDH0(2));
 
     return;
 }

bsp/nuvoton/numaker-m2354/config_lvgl

@@ -29,7 +29,7 @@ CONFIG_IDLE_THREAD_STACK_SIZE=2048
 # CONFIG_RT_KSERVICE_USING_STDLIB is not set
 # CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
 # CONFIG_RT_USING_TINY_FFS is not set
-# CONFIG_RT_PRINTF_LONGLONG is not set
+# CONFIG_RT_KPRINTF_USING_LONGLONG is not set
 CONFIG_RT_DEBUG=y
 CONFIG_RT_DEBUG_COLOR=y
 # CONFIG_RT_DEBUG_INIT_CONFIG is not set
@@ -78,7 +78,7 @@ CONFIG_RT_USING_DEVICE=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=256
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart0"
-CONFIG_RT_VER_NUM=0x40100
+CONFIG_RT_VER_NUM=0x40101
 # CONFIG_RT_USING_CPU_FFS is not set
 # CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
 
@@ -90,17 +90,8 @@ CONFIG_RT_USING_USER_MAIN=y
 CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
 CONFIG_RT_MAIN_THREAD_PRIORITY=10
 # CONFIG_RT_USING_LEGACY is not set
-
-#
-# C++ features
-#
-# CONFIG_RT_USING_CPLUSPLUS is not set
-
-#
-# Command shell
-#
-CONFIG_RT_USING_FINSH=y
 CONFIG_RT_USING_MSH=y
+CONFIG_RT_USING_FINSH=y
 CONFIG_FINSH_USING_MSH=y
 CONFIG_FINSH_THREAD_NAME="tshell"
 CONFIG_FINSH_THREAD_PRIORITY=20
@@ -114,10 +105,6 @@ CONFIG_FINSH_USING_DESCRIPTION=y
 # CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
 # CONFIG_FINSH_USING_AUTH is not set
 CONFIG_FINSH_ARG_MAX=10
-
-#
-# Device virtual file system
-#
 CONFIG_RT_USING_DFS=y
 CONFIG_DFS_USING_POSIX=y
 CONFIG_DFS_USING_WORKDIR=y
@@ -151,6 +138,11 @@ CONFIG_RT_DFS_ELM_MUTEX_TIMEOUT=3000
 CONFIG_RT_USING_DFS_DEVFS=y
 # CONFIG_RT_USING_DFS_ROMFS is not set
 # CONFIG_RT_USING_DFS_RAMFS is not set
+CONFIG_RT_USING_FAL=y
+CONFIG_FAL_DEBUG_CONFIG=y
+CONFIG_FAL_DEBUG=1
+CONFIG_FAL_PART_HAS_TABLE_CFG=y
+# CONFIG_FAL_USING_SFUD_PORT is not set
 
 #
 # Device Drivers
@@ -190,6 +182,7 @@ CONFIG_RT_USING_RTC=y
 # CONFIG_RT_USING_SOFT_RTC is not set
 # CONFIG_RT_USING_SDIO is not set
 CONFIG_RT_USING_SPI=y
+# CONFIG_RT_USING_SPI_BITOPS is not set
 CONFIG_RT_USING_QSPI=y
 # CONFIG_RT_USING_SPI_MSD is not set
 CONFIG_RT_USING_SFUD=y
@@ -272,7 +265,7 @@ CONFIG_RT_USB_DEVICE_HID_MOUSE=y
 # CONFIG_RT_USB_DEVICE_HID_MEDIA is not set
 
 #
-# POSIX layer and C standard library
+# C/C++ and POSIX layer
 #
 CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 
@@ -284,6 +277,7 @@ CONFIG_RT_USING_POSIX_DEVIO=y
 # CONFIG_RT_USING_POSIX_STDIO is not set
 CONFIG_RT_USING_POSIX_POLL=y
 CONFIG_RT_USING_POSIX_SELECT=y
+# CONFIG_RT_USING_POSIX_SOCKET is not set
 # CONFIG_RT_USING_POSIX_TERMIOS is not set
 # CONFIG_RT_USING_POSIX_AIO is not set
 # CONFIG_RT_USING_POSIX_MMAN is not set
@@ -303,26 +297,21 @@ CONFIG_RT_USING_POSIX_SELECT=y
 #
 # Socket is in the 'Network' category
 #
+# CONFIG_RT_USING_CPLUSPLUS is not set
 
 #
 # Network
 #
-
-#
-# Socket abstraction layer
-#
 CONFIG_RT_USING_SAL=y
 CONFIG_SAL_INTERNET_CHECK=y
 
 #
-# protocol stack implement
+# Docking with protocol stacks
 #
+# CONFIG_SAL_USING_LWIP is not set
 CONFIG_SAL_USING_AT=y
+# CONFIG_SAL_USING_TLS is not set
 CONFIG_SAL_USING_POSIX=y
-
-#
-# Network interface device
-#
 CONFIG_RT_USING_NETDEV=y
 CONFIG_NETDEV_USING_IFCONFIG=y
 CONFIG_NETDEV_USING_PING=y
@@ -332,15 +321,7 @@ CONFIG_NETDEV_USING_AUTO_DEFAULT=y
 CONFIG_NETDEV_IPV4=1
 CONFIG_NETDEV_IPV6=0
 # CONFIG_NETDEV_IPV6_SCOPES is not set
-
-#
-# light weight TCP/IP stack
-#
 # CONFIG_RT_USING_LWIP is not set
-
-#
-# AT commands
-#
 CONFIG_RT_USING_AT=y
 # CONFIG_AT_DEBUG is not set
 # CONFIG_AT_USING_SERVER is not set
@@ -352,11 +333,6 @@ CONFIG_AT_USING_CLI=y
 CONFIG_AT_CMD_MAX_LEN=2048
 CONFIG_AT_SW_VERSION_NUM=0x10301
 
-#
-# VBUS(Virtual Software BUS)
-#
-# CONFIG_RT_USING_VBUS is not set
-
 #
 # Utilities
 #
@@ -367,6 +343,7 @@ CONFIG_UTEST_THR_STACK_SIZE=4096
 CONFIG_UTEST_THR_PRIORITY=20
 # CONFIG_RT_USING_VAR_EXPORT is not set
 # CONFIG_RT_USING_RT_LINK is not set
+# CONFIG_RT_USING_VBUS is not set
 
 #
 # RT-Thread Utestcases
@@ -380,6 +357,7 @@ CONFIG_UTEST_THR_PRIORITY=20
 #
 # IoT - internet of things
 #
+# CONFIG_PKG_USING_LWIP is not set
 # CONFIG_PKG_USING_LORAWAN_DRIVER is not set
 # CONFIG_PKG_USING_PAHOMQTT is not set
 # CONFIG_PKG_USING_UMQTT is not set
@@ -390,12 +368,8 @@ CONFIG_UTEST_THR_PRIORITY=20
 # CONFIG_PKG_USING_KAWAII_MQTT is not set
 # CONFIG_PKG_USING_BC28_MQTT is not set
 # CONFIG_PKG_USING_WEBTERMINAL is not set
-# CONFIG_PKG_USING_CJSON is not set
-# CONFIG_PKG_USING_JSMN is not set
 # CONFIG_PKG_USING_LIBMODBUS is not set
 # CONFIG_PKG_USING_FREEMODBUS is not set
-# CONFIG_PKG_USING_LJSON is not set
-# CONFIG_PKG_USING_EZXML is not set
 # CONFIG_PKG_USING_NANOPB is not set
 
 #
@@ -468,6 +442,7 @@ CONFIG_PKG_AT_DEVICE_VER_NUM=0x99999
 # CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set
 # CONFIG_PKG_USING_JOYLINK is not set
 # CONFIG_PKG_USING_EZ_IOT_OS is not set
+# CONFIG_PKG_USING_IOTSHARP_SDK is not set
 # CONFIG_PKG_USING_NIMBLE is not set
 # CONFIG_PKG_USING_LLSYNC_SDK_ADAPTER is not set
 # CONFIG_PKG_USING_OTA_DOWNLOADER is not set
@@ -483,16 +458,13 @@ CONFIG_PKG_AT_DEVICE_VER_NUM=0x99999
 # CONFIG_PKG_USING_ABUP_FOTA is not set
 # CONFIG_PKG_USING_LIBCURL2RTT is not set
 # CONFIG_PKG_USING_CAPNP is not set
-# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
 # CONFIG_PKG_USING_AGILE_TELNET is not set
 # CONFIG_PKG_USING_NMEALIB is not set
-# CONFIG_PKG_USING_AGILE_JSMN is not set
 # CONFIG_PKG_USING_PDULIB is not set
 # CONFIG_PKG_USING_BTSTACK is not set
 # CONFIG_PKG_USING_LORAWAN_ED_STACK is not set
 # CONFIG_PKG_USING_WAYZ_IOTKIT is not set
 # CONFIG_PKG_USING_MAVLINK is not set
-# CONFIG_PKG_USING_RAPIDJSON is not set
 # CONFIG_PKG_USING_BSAL is not set
 # CONFIG_PKG_USING_AGILE_MODBUS is not set
 # CONFIG_PKG_USING_AGILE_FTP is not set
@@ -504,12 +476,14 @@ CONFIG_PKG_AT_DEVICE_VER_NUM=0x99999
 # CONFIG_PKG_USING_HM is not set
 # CONFIG_PKG_USING_SMALL_MODBUS is not set
 # CONFIG_PKG_USING_NET_SERVER is not set
+# CONFIG_PKG_USING_ZFTP is not set
 
 #
 # security packages
 #
 # CONFIG_PKG_USING_MBEDTLS is not set
 # CONFIG_PKG_USING_LIBSODIUM is not set
+# CONFIG_PKG_USING_LIBHYDROGEN is not set
 # CONFIG_PKG_USING_TINYCRYPT is not set
 # CONFIG_PKG_USING_TFM is not set
 # CONFIG_PKG_USING_YD_CRYPTO is not set
@@ -517,11 +491,28 @@ CONFIG_PKG_AT_DEVICE_VER_NUM=0x99999
 #
 # language packages
 #
+
+#
+# JSON: JavaScript Object Notation, a lightweight data-interchange format
+#
+# CONFIG_PKG_USING_CJSON is not set
+# CONFIG_PKG_USING_LJSON is not set
+# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
+# CONFIG_PKG_USING_RAPIDJSON is not set
+# CONFIG_PKG_USING_JSMN is not set
+# CONFIG_PKG_USING_AGILE_JSMN is not set
+
+#
+# XML: Extensible Markup Language
+#
+# CONFIG_PKG_USING_SIMPLE_XML is not set
+# CONFIG_PKG_USING_EZXML is not set
 # CONFIG_PKG_USING_LUATOS_SOC is not set
 # CONFIG_PKG_USING_LUA is not set
 # CONFIG_PKG_USING_JERRYSCRIPT is not set
 # CONFIG_PKG_USING_MICROPYTHON is not set
 # CONFIG_PKG_USING_PIKASCRIPT is not set
+# CONFIG_PKG_USING_RTT_RUST is not set
 
 #
 # multimedia packages
@@ -532,17 +523,16 @@ CONFIG_PKG_AT_DEVICE_VER_NUM=0x99999
 #
 CONFIG_PKG_USING_LVGL=y
 CONFIG_PKG_LVGL_PATH="/packages/multimedia/LVGL/LVGL"
-# CONFIG_PKG_USING_LVGL_EXAMPLES is not set
-# CONFIG_PKG_USING_LVGL_DEMOS is not set
-CONFIG_PKG_USING_LVGL_V820=y
-# CONFIG_PKG_USING_LVGL_V810 is not set
-# CONFIG_PKG_USING_LVGL_LATEST_VERSION is not set
-CONFIG_PKG_LVGL_VER="v8.2.0"
-CONFIG_PKG_LVGL_VER_NUM=0x08020
+CONFIG_PKG_LVGL_THREAD_PRIO=20
+CONFIG_PKG_LVGL_THREAD_STACK_SIZE=4096
+CONFIG_PKG_LVGL_DISP_REFR_PERIOD=30
+# CONFIG_PKG_LVGL_USING_EXAMPLES is not set
+CONFIG_PKG_LVGL_USING_DEMOS=y
+CONFIG_PKG_LVGL_VER_NUM=0x99999
+CONFIG_PKG_LVGL_VER="latest"
 # CONFIG_PKG_USING_LITTLEVGL2RTT is not set
-CONFIG_PKG_USING_LV_MUSIC_DEMO=y
-CONFIG_PKG_LV_MUSIC_DEMO_PATH="/packages/multimedia/LVGL/lv_music_demo"
-CONFIG_PKG_LV_MUSIC_DEMO_VER="v0.2.0"
+# CONFIG_PKG_USING_LV_MUSIC_DEMO is not set
+# CONFIG_PKG_USING_GUI_GUIDER_DEMO is not set
 
 #
 # u8g2: a monochrome graphic library
@@ -572,6 +562,7 @@ CONFIG_PKG_LV_MUSIC_DEMO_VER="v0.2.0"
 # CONFIG_PKG_USING_TERMBOX is not set
 # CONFIG_PKG_USING_VT100 is not set
 # CONFIG_PKG_USING_QRCODE is not set
+# CONFIG_PKG_USING_GUIENGINE is not set
 
 #
 # tools packages
@@ -614,6 +605,10 @@ CONFIG_PKG_LV_MUSIC_DEMO_VER="v0.2.0"
 # CONFIG_PKG_USING_SOLAR_TERMS is not set
 # CONFIG_PKG_USING_GAN_ZHI is not set
 # CONFIG_PKG_USING_FDT is not set
+# CONFIG_PKG_USING_CBOX is not set
+# CONFIG_PKG_USING_SNOWFLAKE is not set
+# CONFIG_PKG_USING_HASH_MATCH is not set
+# CONFIG_PKG_USING_FIRE_PID_CURVE is not set
 
 #
 # system packages
@@ -645,6 +640,7 @@ CONFIG_PKG_LV_MUSIC_DEMO_VER="v0.2.0"
 # CMSIS: ARM Cortex-M Microcontroller Software Interface Standard
 #
 # CONFIG_PKG_USING_CMSIS_5 is not set
+# CONFIG_PKG_USING_CMSIS_RTOS1 is not set
 # CONFIG_PKG_USING_CMSIS_RTOS2 is not set
 
 #
@@ -656,26 +652,10 @@ CONFIG_PKG_LV_MUSIC_DEMO_VER="v0.2.0"
 # CONFIG_PKG_USING_UC_CLK is not set
 # CONFIG_PKG_USING_UC_COMMON is not set
 # CONFIG_PKG_USING_UC_MODBUS is not set
-# CONFIG_RT_USING_ARDUINO is not set
-# CONFIG_PKG_USING_GUIENGINE is not set
+# CONFIG_PKG_USING_RTDUINO is not set
 # CONFIG_PKG_USING_CAIRO is not set
 # CONFIG_PKG_USING_PIXMAN is not set
 # CONFIG_PKG_USING_PARTITION is not set
-CONFIG_PKG_USING_FAL=y
-CONFIG_PKG_FAL_PATH="/packages/system/fal"
-CONFIG_FAL_DEBUG_CONFIG=y
-CONFIG_FAL_DEBUG=1
-CONFIG_FAL_PART_HAS_TABLE_CFG=y
-# CONFIG_FAL_USING_SFUD_PORT is not set
-# CONFIG_PKG_USING_FAL_V10000 is not set
-# CONFIG_PKG_USING_FAL_V00500 is not set
-# CONFIG_PKG_USING_FAL_V00400 is not set
-# CONFIG_PKG_USING_FAL_V00300 is not set
-# CONFIG_PKG_USING_FAL_V00200 is not set
-# CONFIG_PKG_USING_FAL_V00100 is not set
-CONFIG_PKG_USING_FAL_LATEST_VERSION=y
-CONFIG_PKG_FAL_VER="latest"
-CONFIG_PKG_FAL_VER_NUM=0x99999
 # CONFIG_PKG_USING_FLASHDB is not set
 # CONFIG_PKG_USING_SQLITE is not set
 # CONFIG_PKG_USING_RTI is not set
@@ -702,6 +682,9 @@ CONFIG_PKG_FAL_VER_NUM=0x99999
 # CONFIG_PKG_USING_MCUBOOT is not set
 # CONFIG_PKG_USING_TINYUSB is not set
 # CONFIG_PKG_USING_CHERRYUSB is not set
+# CONFIG_PKG_USING_KMULTI_RTIMER is not set
+# CONFIG_PKG_USING_TFDB is not set
+# CONFIG_PKG_USING_QPC is not set
 
 #
 # peripheral libraries and drivers
@@ -725,6 +708,7 @@ CONFIG_PKG_FAL_VER_NUM=0x99999
 # CONFIG_PKG_USING_WM_LIBRARIES is not set
 # CONFIG_PKG_USING_KENDRYTE_SDK is not set
 # CONFIG_PKG_USING_INFRARED is not set
+# CONFIG_PKG_USING_MULTI_INFRARED is not set
 # CONFIG_PKG_USING_AGILE_BUTTON is not set
 # CONFIG_PKG_USING_AGILE_LED is not set
 # CONFIG_PKG_USING_AT24CXX is not set
@@ -781,6 +765,7 @@ CONFIG_PKG_FAL_VER_NUM=0x99999
 # CONFIG_PKG_USING_SOFT_SERIAL is not set
 # CONFIG_PKG_USING_MB85RS16 is not set
 # CONFIG_PKG_USING_CW2015 is not set
+# CONFIG_PKG_USING_RFM300 is not set
 
 #
 # AI packages
@@ -799,6 +784,10 @@ CONFIG_PKG_FAL_VER_NUM=0x99999
 # miscellaneous packages
 #
 
+#
+# project laboratory
+#
+
 #
 # samples: kernel and components samples
 #
@@ -849,6 +838,9 @@ CONFIG_PKG_FAL_VER_NUM=0x99999
 # CONFIG_PKG_USING_DESIGN_PATTERN is not set
 # CONFIG_PKG_USING_CONTROLLER is not set
 # CONFIG_PKG_USING_PHASE_LOCKED_LOOP is not set
+# CONFIG_PKG_USING_MFBD is not set
+# CONFIG_PKG_USING_SLCAN2RTT is not set
+# CONFIG_PKG_USING_SOEM is not set
 
 #
 # Hardware Drivers Config
@@ -957,6 +949,7 @@ CONFIG_BOARD_USING_ILI9341_PIN_DC=8
 #
 CONFIG_NU_PKG_USING_UTILS=y
 # CONFIG_NU_PKG_USING_DEMO is not set
+# CONFIG_NU_PKG_USING_LVGL is not set
 # CONFIG_NU_PKG_USING_BMX055 is not set
 # CONFIG_NU_PKG_USING_MAX31875 is not set
 # CONFIG_NU_PKG_USING_NAU88L25 is not set
@@ -972,8 +965,11 @@ CONFIG_NU_PKG_ILI9341_HORIZONTAL=y
 CONFIG_BSP_LCD_BPP=16
 CONFIG_BSP_LCD_WIDTH=320
 CONFIG_BSP_LCD_HEIGHT=240
+# CONFIG_NU_PKG_USING_SSD1963 is not set
+# CONFIG_NU_PKG_USING_FSA506 is not set
+# CONFIG_NU_PKG_USING_TPC is not set
 CONFIG_NU_PKG_USING_ADC_TOUCH=y
 CONFIG_NU_PKG_USING_ADC_TOUCH_SW=y
 # CONFIG_NU_PKG_USING_SPINAND is not set
+CONFIG_UTEST_CMD_PREFIX="bsp.nuvoton.utest."
 CONFIG_BOARD_USE_UTEST=y
-CONFIG_UTEST_CMD_PREFIX="bsp.nuvoton.numaker-m2354.test.utest."

bsp/nuvoton/numaker-pfm-m487/.config

@@ -114,7 +114,7 @@ CONFIG_DFS_USING_WORKDIR=y
 CONFIG_DFS_FILESYSTEMS_MAX=8
 CONFIG_DFS_FILESYSTEM_TYPES_MAX=4
 CONFIG_DFS_FD_MAX=32
-# CONFIG_RT_USING_DFS_MNTTABLE is not set
+CONFIG_RT_USING_DFS_MNTTABLE=y
 CONFIG_RT_USING_DFS_ELMFAT=y
 
 #
@@ -185,7 +185,13 @@ CONFIG_PM_TICKLESS_THRESHOLD_TIME=2
 CONFIG_RT_USING_RTC=y
 # CONFIG_RT_USING_ALARM is not set
 # CONFIG_RT_USING_SOFT_RTC is not set
-# CONFIG_RT_USING_SDIO is not set
+CONFIG_RT_USING_SDIO=y
+CONFIG_RT_SDIO_STACK_SIZE=2048
+CONFIG_RT_SDIO_THREAD_PRIORITY=15
+CONFIG_RT_MMCSD_STACK_SIZE=2048
+CONFIG_RT_MMCSD_THREAD_PREORITY=22
+CONFIG_RT_MMCSD_MAX_PARTITION=16
+# CONFIG_RT_SDIO_DEBUG is not set
 CONFIG_RT_USING_SPI=y
 # CONFIG_RT_USING_SPI_BITOPS is not set
 CONFIG_RT_USING_QSPI=y
@@ -612,6 +618,7 @@ CONFIG_UTEST_THR_PRIORITY=20
 # CONFIG_PKG_USING_FDT is not set
 # CONFIG_PKG_USING_CBOX is not set
 # CONFIG_PKG_USING_SNOWFLAKE is not set
+# CONFIG_PKG_USING_HASH_MATCH is not set
 
 #
 # system packages
@@ -685,6 +692,7 @@ CONFIG_UTEST_THR_PRIORITY=20
 # CONFIG_PKG_USING_TINYUSB is not set
 # CONFIG_PKG_USING_CHERRYUSB is not set
 # CONFIG_PKG_USING_KMULTI_RTIMER is not set
+# CONFIG_PKG_USING_TFDB is not set
 
 #
 # peripheral libraries and drivers
@@ -886,9 +894,6 @@ CONFIG_BSP_USING_I2C2=y
 CONFIG_BSP_USING_SDH=y
 CONFIG_BSP_USING_SDH0=y
 # CONFIG_BSP_USING_SDH1 is not set
-CONFIG_NU_SDH_USING_PDMA=y
-CONFIG_NU_SDH_HOTPLUG=y
-# CONFIG_NU_SDH_MOUNT_ON_ROOT is not set
 # CONFIG_BSP_USING_CAN is not set
 # CONFIG_BSP_USING_BPWM is not set
 # CONFIG_BSP_USING_EPWM is not set
@@ -967,3 +972,5 @@ CONFIG_NU_PKG_USING_NAU88L25=y
 # CONFIG_NU_PKG_USING_TPC is not set
 # CONFIG_NU_PKG_USING_ADC_TOUCH is not set
 # CONFIG_NU_PKG_USING_SPINAND is not set
+CONFIG_UTEST_CMD_PREFIX="bsp.nuvoton.utest."
+CONFIG_BOARD_USE_UTEST=y

bsp/nuvoton/numaker-pfm-m487/applications/lvgl/lv_conf.h

@@ -11,17 +11,27 @@
 #ifndef LV_CONF_H
 #define LV_CONF_H
 
-#define LV_USE_PERF_MONITOR     1
-#define LV_COLOR_DEPTH          16
+#include "rtconfig.h"
 
-#define LV_HOR_RES_MAX          (320)
-#define LV_VER_RES_MAX          (240)
+#define LV_COLOR_DEPTH                  BSP_LCD_BPP
+#define LV_HOR_RES_MAX                  BSP_LCD_WIDTH
+#define LV_VER_RES_MAX                  BSP_LCD_HEIGHT
 
 #define LV_FONT_MONTSERRAT_12           1
 #define LV_FONT_MONTSERRAT_16           1
-//#define LV_USE_DEMO_BENCHMARK           1
-#define LV_USE_DEMO_WIDGETS             1
-#define LV_DEMO_WIDGETS_SLIDESHOW       1
-
+#define LV_USE_PERF_MONITOR             1
 //#define CONFIG_LV_LOG_LEVEL LV_LOG_LEVEL_TRACE
+
+//#define LV_USE_DEMO_RTT_MUSIC         1
+#if LV_USE_DEMO_RTT_MUSIC
+    #define LV_DEMO_RTT_MUSIC_AUTO_PLAY   1
+
+    #define LV_USE_DEMO_MUSIC             1
+    #define LV_DEMO_MUSIC_AUTO_PLAY       1
+#endif
+
+/* Please comment LV_USE_DEMO_RTT_MUSIC declaration before un-comment below */
+#define LV_USE_DEMO_WIDGETS         1
+//#define LV_USE_DEMO_BENCHMARK       1
+
 #endif

bsp/nuvoton/numaker-pfm-m487/applications/lvgl/lv_demo.c

@@ -5,50 +5,28 @@
  *
  * Change Logs:
  * Date           Author        Notes
- * 2021-10-17     Meco Man      First version
+ * 2022-6-1       Wayne         First version
  */
-#include <rtthread.h>
-#include <lvgl.h>
-#define DBG_TAG    "LVGL"
-#define DBG_LVL    DBG_INFO
-#include <rtdbg.h>
-
-#ifndef LV_THREAD_STACK_SIZE
-    #define LV_THREAD_STACK_SIZE 4096
-#endif
 
-#ifndef LV_THREAD_PRIO
-    #define LV_THREAD_PRIO (RT_THREAD_PRIORITY_MAX*2/3)
-#endif
+#include <lvgl.h>
 
-static void lvgl_thread(void *parameter)
+void lv_user_gui_init(void)
 {
+    /* display demo; you may replace with your LVGL application at here and disable related definitions. */
+
 #if LV_USE_DEMO_BENCHMARK
     extern void lv_demo_benchmark(void);
     lv_demo_benchmark();
 #endif
+
 #if LV_USE_DEMO_WIDGETS
     extern void lv_demo_widgets(void);
     lv_demo_widgets();
 #endif
-    while (1)
-    {
-        lv_task_handler();
-        rt_thread_mdelay(1);
-    }
-}
 
-static int lvgl_demo_init(void)
-{
-    rt_thread_t tid;
-
-    tid = rt_thread_create("LVGL", lvgl_thread, RT_NULL, LV_THREAD_STACK_SIZE, LV_THREAD_PRIO, 10);
-    if (tid == RT_NULL)
-    {
-        LOG_E("Fail to create 'LVGL' thread");
-    }
-    rt_thread_startup(tid);
+#if LV_USE_DEMO_MUSIC || LV_USE_DEMO_RTT_MUSIC
+    extern void lv_demo_music(void);
+    lv_demo_music();
+#endif
 
-    return 0;
 }
-INIT_APP_EXPORT(lvgl_demo_init);

bsp/nuvoton/numaker-pfm-m487/applications/lvgl/lv_port_indev.c

@@ -31,15 +31,12 @@ void nu_touch_inputevent_cb(rt_int16_t x, rt_int16_t y, rt_uint8_t state)
     case RT_TOUCH_EVENT_UP:
         last_state = LV_INDEV_STATE_RELEASED;
         break;
+    case RT_TOUCH_EVENT_MOVE:
     case RT_TOUCH_EVENT_DOWN:
         last_x = x;
         last_y = y;
         last_state = LV_INDEV_STATE_PRESSED;
         break;
-    case RT_TOUCH_EVENT_MOVE:
-        last_x = x;
-        last_y = y;
-        break;
     }
 }
 

bsp/nuvoton/numaker-pfm-m487/applications/mnt.c

@@ -12,6 +12,13 @@
 
 #include <rtthread.h>
 
+#define LOG_TAG         "mnt"
+#define DBG_ENABLE
+#define DBG_SECTION_NAME "mnt"
+#define DBG_LEVEL DBG_ERROR
+#define DBG_COLOR
+#include <rtdbg.h>
+
 #include <dfs_fs.h>
 #include <dfs_file.h>
 #include <unistd.h>
@@ -27,6 +34,29 @@
     #define MOUNT_POINT_SPIFLASH0 "/"
 #endif
 
+#ifdef RT_USING_DFS_MNTTABLE
+
+/*
+const char   *device_name;
+const char   *path;
+const char   *filesystemtype;
+unsigned long rwflag;
+const void   *data;
+*/
+
+const struct dfs_mount_tbl mount_table[] =
+{
+    { "sd0", "/mnt/sd0", "elm", 0, RT_NULL },
+    { "sd0p0", "/mnt/sd0p0", "elm", 0, RT_NULL },
+    { "sd0p1", "/mnt/sd0p1", "elm", 0, RT_NULL },
+    { "sd1", "/mnt/sd1", "elm", 0, RT_NULL },
+    { "sd1p0", "/mnt/sd1p0", "elm", 0, RT_NULL },
+    { "sd1p1", "/mnt/sd1p1", "elm", 0, RT_NULL },
+    {0},
+};
+#endif
+
+
 #if defined(BOARD_USING_STORAGE_SPIFLASH)
 
 #if defined(RT_USB_DEVICE_MSTORAGE)
@@ -107,6 +137,7 @@ exit_mkdir_p:
 
     return ret;
 }
+
 #endif
 
 int mnt_init_spiflash0(void)
@@ -118,6 +149,12 @@ int mnt_init_spiflash0(void)
         goto exit_mnt_init_spiflash0;
     }
     rt_kprintf("mount flash0 with elmfat type: ok\n");
+    mkdir_p("/mnt/sd0", 0x777);
+    mkdir_p("/mnt/sd0p0", 0x777);
+    mkdir_p("/mnt/sd0p1", 0x777);
+    mkdir_p("/mnt/sd1", 0x777);
+    mkdir_p("/mnt/sd1p0", 0x777);
+    mkdir_p("/mnt/sd1p1", 0x777);
 
 #if defined(RT_USBH_MSTORAGE) && defined(UDISK_MOUNTPOINT)
     if (mkdir_p(UDISK_MOUNTPOINT, 0) < 0)

bsp/nuvoton/numaker-pfm-m487/board/Kconfig

@@ -117,8 +117,6 @@ menu "Hardware Drivers Config"
                 select NU_PKG_USING_ILI9341_EBI
                 select NU_PKG_ILI9341_WITH_OFFSCREEN_FRAMEBUFFER
                 select NU_PKG_ILI9341_HORIZONTAL
-                select PKG_USING_LVGL
-                select PKG_USING_LVGL_DEMOS
                 default n
 
             if BOARD_USING_LCD_ILI9341

bsp/nuvoton/numaker-pfm-m487/config_lvgl

@@ -29,7 +29,7 @@ CONFIG_IDLE_THREAD_STACK_SIZE=1024
 # CONFIG_RT_KSERVICE_USING_STDLIB is not set
 # CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
 # CONFIG_RT_USING_TINY_FFS is not set
-# CONFIG_RT_PRINTF_LONGLONG is not set
+# CONFIG_RT_KPRINTF_USING_LONGLONG is not set
 CONFIG_RT_DEBUG=y
 CONFIG_RT_DEBUG_COLOR=y
 # CONFIG_RT_DEBUG_INIT_CONFIG is not set
@@ -80,7 +80,7 @@ CONFIG_RT_USING_DEVICE=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=256
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart0"
-CONFIG_RT_VER_NUM=0x40100
+CONFIG_RT_VER_NUM=0x40101
 CONFIG_ARCH_ARM=y
 CONFIG_RT_USING_CPU_FFS=y
 CONFIG_ARCH_ARM_CORTEX_M=y
@@ -95,17 +95,8 @@ CONFIG_RT_USING_USER_MAIN=y
 CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
 CONFIG_RT_MAIN_THREAD_PRIORITY=10
 # CONFIG_RT_USING_LEGACY is not set
-
-#
-# C++ features
-#
-# CONFIG_RT_USING_CPLUSPLUS is not set
-
-#
-# Command shell
-#
-CONFIG_RT_USING_FINSH=y
 CONFIG_RT_USING_MSH=y
+CONFIG_RT_USING_FINSH=y
 CONFIG_FINSH_USING_MSH=y
 CONFIG_FINSH_THREAD_NAME="tshell"
 CONFIG_FINSH_THREAD_PRIORITY=20
@@ -119,10 +110,6 @@ CONFIG_FINSH_USING_DESCRIPTION=y
 # CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
 # CONFIG_FINSH_USING_AUTH is not set
 CONFIG_FINSH_ARG_MAX=10
-
-#
-# Device virtual file system
-#
 CONFIG_RT_USING_DFS=y
 CONFIG_DFS_USING_POSIX=y
 CONFIG_DFS_USING_WORKDIR=y
@@ -156,6 +143,8 @@ CONFIG_RT_DFS_ELM_MUTEX_TIMEOUT=3000
 CONFIG_RT_USING_DFS_DEVFS=y
 # CONFIG_RT_USING_DFS_ROMFS is not set
 # CONFIG_RT_USING_DFS_RAMFS is not set
+# CONFIG_RT_USING_FAL is not set
+# CONFIG_RT_USING_LWP is not set
 
 #
 # Device Drivers
@@ -194,6 +183,7 @@ CONFIG_RT_USING_RTC=y
 # CONFIG_RT_USING_SOFT_RTC is not set
 # CONFIG_RT_USING_SDIO is not set
 CONFIG_RT_USING_SPI=y
+# CONFIG_RT_USING_SPI_BITOPS is not set
 # CONFIG_RT_USING_QSPI is not set
 # CONFIG_RT_USING_SPI_MSD is not set
 # CONFIG_RT_USING_SFUD is not set
@@ -249,7 +239,7 @@ CONFIG_RT_HWCRYPTO_USING_CRC_04C11DB7=y
 # CONFIG_RT_USING_USB_DEVICE is not set
 
 #
-# POSIX layer and C standard library
+# C/C++ and POSIX layer
 #
 CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 
@@ -261,6 +251,7 @@ CONFIG_RT_USING_POSIX_DEVIO=y
 # CONFIG_RT_USING_POSIX_STDIO is not set
 # CONFIG_RT_USING_POSIX_POLL is not set
 # CONFIG_RT_USING_POSIX_SELECT is not set
+# CONFIG_RT_USING_POSIX_SOCKET is not set
 # CONFIG_RT_USING_POSIX_TERMIOS is not set
 # CONFIG_RT_USING_POSIX_AIO is not set
 # CONFIG_RT_USING_POSIX_MMAN is not set
@@ -280,6 +271,7 @@ CONFIG_RT_USING_POSIX_DEVIO=y
 #
 # Socket is in the 'Network' category
 #
+# CONFIG_RT_USING_CPLUSPLUS is not set
 
 #
 # Network
@@ -289,11 +281,6 @@ CONFIG_RT_USING_POSIX_DEVIO=y
 # CONFIG_RT_USING_LWIP is not set
 # CONFIG_RT_USING_AT is not set
 
-#
-# VBUS(Virtual Software BUS)
-#
-# CONFIG_RT_USING_VBUS is not set
-
 #
 # Utilities
 #
@@ -304,7 +291,7 @@ CONFIG_UTEST_THR_STACK_SIZE=4096
 CONFIG_UTEST_THR_PRIORITY=20
 # CONFIG_RT_USING_VAR_EXPORT is not set
 # CONFIG_RT_USING_RT_LINK is not set
-# CONFIG_RT_USING_LWP is not set
+# CONFIG_RT_USING_VBUS is not set
 
 #
 # RT-Thread Utestcases
@@ -318,6 +305,7 @@ CONFIG_UTEST_THR_PRIORITY=20
 #
 # IoT - internet of things
 #
+# CONFIG_PKG_USING_LWIP is not set
 # CONFIG_PKG_USING_LORAWAN_DRIVER is not set
 # CONFIG_PKG_USING_PAHOMQTT is not set
 # CONFIG_PKG_USING_UMQTT is not set
@@ -328,12 +316,8 @@ CONFIG_UTEST_THR_PRIORITY=20
 # CONFIG_PKG_USING_KAWAII_MQTT is not set
 # CONFIG_PKG_USING_BC28_MQTT is not set
 # CONFIG_PKG_USING_WEBTERMINAL is not set
-# CONFIG_PKG_USING_CJSON is not set
-# CONFIG_PKG_USING_JSMN is not set
 # CONFIG_PKG_USING_LIBMODBUS is not set
 # CONFIG_PKG_USING_FREEMODBUS is not set
-# CONFIG_PKG_USING_LJSON is not set
-# CONFIG_PKG_USING_EZXML is not set
 # CONFIG_PKG_USING_NANOPB is not set
 
 #
@@ -372,6 +356,7 @@ CONFIG_UTEST_THR_PRIORITY=20
 # CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set
 # CONFIG_PKG_USING_JOYLINK is not set
 # CONFIG_PKG_USING_EZ_IOT_OS is not set
+# CONFIG_PKG_USING_IOTSHARP_SDK is not set
 # CONFIG_PKG_USING_NIMBLE is not set
 # CONFIG_PKG_USING_LLSYNC_SDK_ADAPTER is not set
 # CONFIG_PKG_USING_OTA_DOWNLOADER is not set
@@ -387,16 +372,13 @@ CONFIG_UTEST_THR_PRIORITY=20
 # CONFIG_PKG_USING_ABUP_FOTA is not set
 # CONFIG_PKG_USING_LIBCURL2RTT is not set
 # CONFIG_PKG_USING_CAPNP is not set
-# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
 # CONFIG_PKG_USING_AGILE_TELNET is not set
 # CONFIG_PKG_USING_NMEALIB is not set
-# CONFIG_PKG_USING_AGILE_JSMN is not set
 # CONFIG_PKG_USING_PDULIB is not set
 # CONFIG_PKG_USING_BTSTACK is not set
 # CONFIG_PKG_USING_LORAWAN_ED_STACK is not set
 # CONFIG_PKG_USING_WAYZ_IOTKIT is not set
 # CONFIG_PKG_USING_MAVLINK is not set
-# CONFIG_PKG_USING_RAPIDJSON is not set
 # CONFIG_PKG_USING_BSAL is not set
 # CONFIG_PKG_USING_AGILE_MODBUS is not set
 # CONFIG_PKG_USING_AGILE_FTP is not set
@@ -408,12 +390,14 @@ CONFIG_UTEST_THR_PRIORITY=20
 # CONFIG_PKG_USING_HM is not set
 # CONFIG_PKG_USING_SMALL_MODBUS is not set
 # CONFIG_PKG_USING_NET_SERVER is not set
+# CONFIG_PKG_USING_ZFTP is not set
 
 #
 # security packages
 #
 # CONFIG_PKG_USING_MBEDTLS is not set
 # CONFIG_PKG_USING_LIBSODIUM is not set
+# CONFIG_PKG_USING_LIBHYDROGEN is not set
 # CONFIG_PKG_USING_TINYCRYPT is not set
 # CONFIG_PKG_USING_TFM is not set
 # CONFIG_PKG_USING_YD_CRYPTO is not set
@@ -421,11 +405,28 @@ CONFIG_UTEST_THR_PRIORITY=20
 #
 # language packages
 #
+
+#
+# JSON: JavaScript Object Notation, a lightweight data-interchange format
+#
+# CONFIG_PKG_USING_CJSON is not set
+# CONFIG_PKG_USING_LJSON is not set
+# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
+# CONFIG_PKG_USING_RAPIDJSON is not set
+# CONFIG_PKG_USING_JSMN is not set
+# CONFIG_PKG_USING_AGILE_JSMN is not set
+
+#
+# XML: Extensible Markup Language
+#
+# CONFIG_PKG_USING_SIMPLE_XML is not set
+# CONFIG_PKG_USING_EZXML is not set
 # CONFIG_PKG_USING_LUATOS_SOC is not set
 # CONFIG_PKG_USING_LUA is not set
 # CONFIG_PKG_USING_JERRYSCRIPT is not set
 # CONFIG_PKG_USING_MICROPYTHON is not set
 # CONFIG_PKG_USING_PIKASCRIPT is not set
+# CONFIG_PKG_USING_RTT_RUST is not set
 
 #
 # multimedia packages
@@ -436,15 +437,16 @@ CONFIG_UTEST_THR_PRIORITY=20
 #
 CONFIG_PKG_USING_LVGL=y
 CONFIG_PKG_LVGL_PATH="/packages/multimedia/LVGL/LVGL"
-# CONFIG_PKG_USING_LVGL_EXAMPLES is not set
-CONFIG_PKG_USING_LVGL_DEMOS=y
-CONFIG_PKG_USING_LVGL_V820=y
-# CONFIG_PKG_USING_LVGL_V810 is not set
-# CONFIG_PKG_USING_LVGL_LATEST_VERSION is not set
-CONFIG_PKG_LVGL_VER="v8.2.0"
-CONFIG_PKG_LVGL_VER_NUM=0x08020
+CONFIG_PKG_LVGL_THREAD_PRIO=20
+CONFIG_PKG_LVGL_THREAD_STACK_SIZE=4096
+CONFIG_PKG_LVGL_DISP_REFR_PERIOD=30
+# CONFIG_PKG_LVGL_USING_EXAMPLES is not set
+CONFIG_PKG_LVGL_USING_DEMOS=y
+CONFIG_PKG_LVGL_VER_NUM=0x99999
+CONFIG_PKG_LVGL_VER="latest"
 # CONFIG_PKG_USING_LITTLEVGL2RTT is not set
 # CONFIG_PKG_USING_LV_MUSIC_DEMO is not set
+# CONFIG_PKG_USING_GUI_GUIDER_DEMO is not set
 
 #
 # u8g2: a monochrome graphic library
@@ -474,6 +476,8 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # CONFIG_PKG_USING_TERMBOX is not set
 # CONFIG_PKG_USING_VT100 is not set
 # CONFIG_PKG_USING_QRCODE is not set
+# CONFIG_PKG_USING_GUIENGINE is not set
+# CONFIG_PKG_USING_PERSIMMON is not set
 
 #
 # tools packages
@@ -516,6 +520,10 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # CONFIG_PKG_USING_SOLAR_TERMS is not set
 # CONFIG_PKG_USING_GAN_ZHI is not set
 # CONFIG_PKG_USING_FDT is not set
+# CONFIG_PKG_USING_CBOX is not set
+# CONFIG_PKG_USING_SNOWFLAKE is not set
+# CONFIG_PKG_USING_HASH_MATCH is not set
+# CONFIG_PKG_USING_FIRE_PID_CURVE is not set
 
 #
 # system packages
@@ -547,6 +555,7 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # CMSIS: ARM Cortex-M Microcontroller Software Interface Standard
 #
 # CONFIG_PKG_USING_CMSIS_5 is not set
+# CONFIG_PKG_USING_CMSIS_RTOS1 is not set
 # CONFIG_PKG_USING_CMSIS_RTOS2 is not set
 
 #
@@ -558,13 +567,10 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # CONFIG_PKG_USING_UC_CLK is not set
 # CONFIG_PKG_USING_UC_COMMON is not set
 # CONFIG_PKG_USING_UC_MODBUS is not set
-# CONFIG_RT_USING_ARDUINO is not set
-# CONFIG_PKG_USING_GUIENGINE is not set
-# CONFIG_PKG_USING_PERSIMMON is not set
+# CONFIG_PKG_USING_RTDUINO is not set
 # CONFIG_PKG_USING_CAIRO is not set
 # CONFIG_PKG_USING_PIXMAN is not set
 # CONFIG_PKG_USING_PARTITION is not set
-# CONFIG_PKG_USING_FAL is not set
 # CONFIG_PKG_USING_FLASHDB is not set
 # CONFIG_PKG_USING_SQLITE is not set
 # CONFIG_PKG_USING_RTI is not set
@@ -592,6 +598,8 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # CONFIG_PKG_USING_TINYUSB is not set
 # CONFIG_PKG_USING_CHERRYUSB is not set
 # CONFIG_PKG_USING_KMULTI_RTIMER is not set
+# CONFIG_PKG_USING_TFDB is not set
+# CONFIG_PKG_USING_QPC is not set
 
 #
 # peripheral libraries and drivers
@@ -746,6 +754,8 @@ CONFIG_PKG_LVGL_VER_NUM=0x08020
 # CONFIG_PKG_USING_CONTROLLER is not set
 # CONFIG_PKG_USING_PHASE_LOCKED_LOOP is not set
 # CONFIG_PKG_USING_MFBD is not set
+# CONFIG_PKG_USING_SLCAN2RTT is not set
+# CONFIG_PKG_USING_SOEM is not set
 
 #
 # Hardware Drivers Config
@@ -858,6 +868,7 @@ CONFIG_BOARD_USING_SRAM0_AS_MEMHEAP=y
 #
 CONFIG_NU_PKG_USING_UTILS=y
 # CONFIG_NU_PKG_USING_DEMO is not set
+# CONFIG_NU_PKG_USING_LVGL is not set
 # CONFIG_NU_PKG_USING_BMX055 is not set
 # CONFIG_NU_PKG_USING_MAX31875 is not set
 # CONFIG_NU_PKG_USING_NAU88L25 is not set
@@ -873,7 +884,10 @@ CONFIG_BSP_LCD_BPP=16
 CONFIG_BSP_LCD_WIDTH=320
 CONFIG_BSP_LCD_HEIGHT=240
 # CONFIG_NU_PKG_USING_SSD1963 is not set
-# CONFIG_NU_PKG_USING_ILI_TPC is not set
+# CONFIG_NU_PKG_USING_FSA506 is not set
+# CONFIG_NU_PKG_USING_TPC is not set
 CONFIG_NU_PKG_USING_ADC_TOUCH=y
 CONFIG_NU_PKG_USING_ADC_TOUCH_SW=y
 # CONFIG_NU_PKG_USING_SPINAND is not set
+CONFIG_UTEST_CMD_PREFIX="bsp.nuvoton.utest."
+CONFIG_BOARD_USE_UTEST=y

bsp/nuvoton/numaker-pfm-m487/template.uvprojx

@@ -15,8 +15,8 @@
         <TargetCommonOption>
           <Device>M487JIDAE</Device>
           <Vendor>Nuvoton</Vendor>
-          <PackID>Nuvoton.NuMicro_DFP.1.3.5</PackID>
-          <PackURL>http://www.nuvoton.com/hq/enu/Documents/KEILSoftwarePack</PackURL>
+          <PackID>Nuvoton.NuMicro_DFP.1.3.13</PackID>
+          <PackURL>https://github.com/OpenNuvoton/cmsis-packs/raw/master/</PackURL>
           <Cpu>IRAM(0x20000000,0x28000) IROM(0x00000000,0x80000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000)</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -136,7 +136,7 @@
             <DriverSelection>4103</DriverSelection>
           </Flash1>
           <bUseTDR>1</bUseTDR>
-          <Flash2>NULink\Nu_Link.dll</Flash2>
+          <Flash2>BIN\UL2CM3.DLL</Flash2>
           <Flash3>"" ()</Flash3>
           <Flash4></Flash4>
           <pFcarmOut></pFcarmOut>
@@ -311,7 +311,7 @@
           </ArmAdsMisc>
           <Cads>
             <interw>1</interw>
-            <Optim>1</Optim>
+            <Optim>3</Optim>
             <oTime>0</oTime>
             <SplitLS>0</SplitLS>
             <OneElfS>0</OneElfS>