[bsp][stm32] 添加野火stm32f767开发板bsp

bsp/stm32/docs/STM32系列BSP添加教程.md

@@ -59,6 +59,7 @@ STM32 BSP 由三部分组成，分别是 (1) 通用库、(2) BSP 模板和 (3)
 | ------- | ---- |
 | libraries/templates/stm32f10x | F1系列芯片模板 |
 | libraries/templates/stm32f4xx | F4系列芯片模板 |
+| libraries/templates/stm32f7xx | F7系列芯片模板 |
 | libraries/templates/stm32l4xx | L4系列芯片模板 |
 
 拷贝 `stm32/libraries/templates/stm32f10x` 文件夹并改名为 `stm32/stm32f103-atk-nano` 。如下图所示：

bsp/stm32/stm32f767-fire-challenger/README.md

@@ -40,8 +40,8 @@
 | **板载外设**      | **支持情况** | **备注**                              |
 | :----------------- | :----------: | :------------------------------------- |
 | USB 转串口        |     支持     |                                       |
-| SPI Flash         |     支持     |                                       |
-| 以太网            |     支持     |                                       |
+| QSPI Flash        |   暂不支持    |                                       |
+| 以太网            |   暂不支持    |                                       |
 | SD卡              |   暂不支持   |                                       |
 | CAN               |   暂不支持   |                                       |
 | **片上外设**      | **支持情况** | **备注**                              |

bsp/stm32/stm32f767-fire-challenger/board/Kconfig

@@ -17,39 +17,6 @@ menu "Onboard Peripheral Drivers"
         select BSP_USING_UART2
         default n
         
-    config BSP_USING_SDRAM
-        bool "Enable SDRAM"
-        default n
-        
-    config BSP_USING_SPI_FLASH
-        bool "Enable SPI FLASH (W25Q128 spi5)"
-        select BSP_USING_SPI5
-        select RT_USING_SFUD
-        select RT_SFUD_USING_SFDP
-        default n
-        
-    config BSP_USING_MPU6050
-        bool "Enable MPU6050 (i2c1)"
-        select BSP_USING_I2C1
-        select PKG_USING_MPU6XXX
-        default n
-
-    config BSP_USING_ETH
-        bool "Enable Ethernet"
-        default n
-        select RT_USING_LWIP
-        if BSP_USING_ETH
-            config EXTERNAL_PHY_ADDRESS
-                hex
-                default 0x00
-        endif
-
-    config BSP_USING_POT
-        bool "Enable potentiometer"
-        select BSP_USING_ADC
-        select BSP_USING_ADC1
-        default n    
-
 endmenu
 
 menu "On-chip Peripheral Drivers"

bsp/stm32/stm32f767-fire-challenger/board/ports/fal_cfg.h

@@ -1,34 +0,0 @@
-/*
- * Copyright (c) 2006-2018, RT-Thread Development Team
- *
- * SPDX-License-Identifier: Apache-2.0
- *
- * Change Logs:
- * Date           Author       Notes
- * 2018-12-5      SummerGift   first version
- */
-
-#ifndef _FAL_CFG_H_
-#define _FAL_CFG_H_
-
-#include <rtthread.h>
-#include <board.h>
-
-extern const struct fal_flash_dev stm32_onchip_flash;
-
-/* flash device table */
-#define FAL_FLASH_DEV_TABLE                                          \
-{                                                                    \
-    &stm32_onchip_flash,                                             \
-}
-/* ====================== Partition Configuration ========================== */
-#ifdef FAL_PART_HAS_TABLE_CFG
-
-/* partition table */
-#define FAL_PART_TABLE                                                                                   \
-{                                                                                                        \
-    {FAL_PART_MAGIC_WROD,        "app",   "onchip_flash",       0,                       1008 * 1024, 0},\
-    {FAL_PART_MAGIC_WROD,        "param", "onchip_flash",       1008* 1024 ,               16 * 1024, 0},\
-}
-#endif /* FAL_PART_HAS_TABLE_CFG */
-#endif /* _FAL_CFG_H_ */

bsp/stm32/stm32f767-fire-challenger/board/ports/sdram_port.h

@@ -23,9 +23,9 @@
 /* row bit numbers: 11, 12, 13 */
 #define SDRAM_ROW_BITS                  12
 /* cas latency clock number: 1, 2, 3 */
-#define SDRAM_CAS_LATENCY               3
+#define SDRAM_CAS_LATENCY               2
 /* read pipe delay: 0, 1, 2 */
-#define SDRAM_RPIPE_DELAY               1
+#define SDRAM_RPIPE_DELAY               0
 /* clock divid: 2, 3 */
 #define SDCLOCK_PERIOD                  2
 /* refresh rate counter */
@@ -33,21 +33,21 @@
 #define SDRAM_SIZE                      ((uint32_t)0x800000)
 
 /* Timing configuration for IS42S16400J */
-/* 90 MHz of SD clock frequency (180MHz/2) */
+/* 108 MHz of SD clock frequency (216MHz/2) */
 /* TMRD: 2 Clock cycles */
 #define LOADTOACTIVEDELAY               2
-/* TXSR: 7x11.90ns */
-#define EXITSELFREFRESHDELAY            7
-/* TRAS: 4x11.90ns */
-#define SELFREFRESHTIME                 4
-/* TRC:  7x11.90ns */
+/* TXSR: 8x9.25ns */
+#define EXITSELFREFRESHDELAY            8
+/* TRAS: 5x9.25ns */
+#define SELFREFRESHTIME                 5
+/* TRC:  7x9.25ns */
 #define ROWCYCLEDELAY                   7
 /* TWR:  2 Clock cycles */
 #define WRITERECOVERYTIME               2
-/* TRP:  2x11.90ns */
+/* TRP:  2x9.25ns */
 #define RPDELAY                         2
-/* TRCD: 2x11.90ns */
-#define RCDDELAY                        2
+/* TRCD: 2x9.25ns */
+#define RCDDELAY                        3
 
 /* memory mode register */
 #define SDRAM_MODEREG_BURST_LENGTH_1             ((uint16_t)0x0000)

bsp/stm32/stm32f767-fire-challenger/board/ports/spi_flash_init.c

@@ -1,31 +0,0 @@
-/*
- * Copyright (c) 2006-2018, RT-Thread Development Team
- *
- * SPDX-License-Identifier: Apache-2.0
- *
- * Change Logs:
- * Date           Author       Notes
- * 2018-11-27     SummerGift   add spi flash port file
- */
-
-#include <rtthread.h>
-#include "spi_flash.h"
-#include "spi_flash_sfud.h"
-#include "drv_spi.h"
-
-#if defined(BSP_USING_SPI_FLASH)
-static int rt_hw_spi_flash_init(void)
-{
-    __HAL_RCC_GPIOF_CLK_ENABLE();
-    rt_hw_spi_device_attach("spi5", "spi50", GPIOF, GPIO_PIN_6);
-
-    if (RT_NULL == rt_sfud_flash_probe("W25Q128", "spi50"))
-    {
-        return -RT_ERROR;
-    }
-
-    return RT_EOK;
-}
-INIT_COMPONENT_EXPORT(rt_hw_spi_flash_init);
-#endif
-