format .icf, .lds, .sct

bsp/Infineon/psoc6-cy8ckit-062-BLE/board/linker_scripts/link.icf

@@ -1,247 +1,247 @@
-/*******************************************************************************
-* \file cy8c6xx7_cm4_dual.icf
-* \version 2.91
-*
-* Linker file for the IAR compiler.
-*
-* The main purpose of the linker script is to describe how the sections in the
-* input files should be mapped into the output file, and to control the memory
-* layout of the output file.
-*
-* \note The entry point is fixed and starts at 0x10000000. The valid application
-* image should be placed there.
-*
-* \note The linker files included with the PDL template projects must be generic
-* and handle all common use cases. Your project may not use every section
-* defined in the linker files. In that case you may see warnings during the
-* build process. In your project, you can simply comment out or remove the
-* relevant code in the linker file.
-*
-********************************************************************************
-* \copyright
-* Copyright 2016-2021 Cypress Semiconductor Corporation
-* SPDX-License-Identifier: Apache-2.0
-*
-* Licensed under the Apache License, Version 2.0 (the "License");
-* you may not use this file except in compliance with the License.
-* You may obtain a copy of the License at
-*
-*     http://www.apache.org/licenses/LICENSE-2.0
-*
-* Unless required by applicable law or agreed to in writing, software
-* distributed under the License is distributed on an "AS IS" BASIS,
-* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-* See the License for the specific language governing permissions and
-* limitations under the License.
-*******************************************************************************/
-
-/*###ICF### Section handled by ICF editor, don't touch! ****/
-/*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
-/*-Specials-*/
-define symbol __ICFEDIT_intvec_start__ = 0x00000000;
-
-/* The symbols below define the location and size of blocks of memory in the target.
- * Use these symbols to specify the memory regions available for allocation.
- */
-
-/* The following symbols control RAM and flash memory allocation for the CM4 core.
- * You can change the memory allocation by editing RAM and Flash symbols.
- * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
- * Using this memory region for other purposes will lead to unexpected behavior.
- * Your changes must be aligned with the corresponding symbols for CM0+ core in 'xx_cm0plus.icf',
- * where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.icf'.
- */
-/* RAM */
-define symbol __ICFEDIT_region_IRAM1_start__ = 0x08002000;
-define symbol __ICFEDIT_region_IRAM1_end__   = 0x080477FF;
-
-/* Flash */
-define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
-define symbol __ICFEDIT_region_IROM1_end__   = 0x100FFFFF;
-
-/* The following symbols define a 32K flash region used for EEPROM emulation.
- * This region can also be used as the general purpose flash.
- * You can assign sections to this memory region for only one of the cores.
- * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
- * Therefore, repurposing this memory region will prevent such middleware from operation.
- */
-define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
-define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
-
-/* The following symbols define device specific memory regions and must not be changed. */
-/* Supervisory FLASH - User Data */
-define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
-define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
-
-/* Supervisory FLASH - Normal Access Restrictions (NAR) */
-define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
-define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
-
-/* Supervisory FLASH - Public Key */
-define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
-define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
-
-/* Supervisory FLASH - Table of Content # 2 */
-define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
-define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
-
-/* Supervisory FLASH - Table of Content # 2 Copy */
-define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
-define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
-
-/* eFuse */
-define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
-define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
-
-/* XIP */
-define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
-define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
-
-define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
-define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
-
-
-define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
-/*-Sizes-*/
-if (!isdefinedsymbol(__STACK_SIZE)) {
-  define symbol __ICFEDIT_size_cstack__ = 0x1000;
-} else {
-  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
-}
-define symbol __ICFEDIT_size_proc_stack__ = 0x0;
-
-/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
-if (!isdefinedsymbol(__HEAP_SIZE)) {
-    define symbol __ICFEDIT_size_heap__ = 0x0400;
-} else {
-  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
-}
-/**** End of ICF editor section. ###ICF###*/
-
-/* By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
- * More about CM0+ prebuilt images, see here:
- * https://github.com/cypresssemiconductorco/psoc6cm0p
- */
-/* The size of the Cortex-M0+ application image */
-define symbol FLASH_CM0P_SIZE  = 0x2000;
-
-define memory mem with size = 4G;
-define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
-define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
-define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
-define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
-define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
-define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
-define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
-define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
-define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
-define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
-
-define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
-define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
-define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
-define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
-define block CM0P_RO with size = FLASH_CM0P_SIZE  { readonly section .cy_m0p_image };
-define block RO     {first section .intvec, readonly};
-
-define block cy_xip { section .cy_xip };
-
-/*-Initializations-*/
-initialize by copy { readwrite };
-do not initialize  { section .noinit, section .intvec_ram };
-
-/*-Placement-*/
-
-/* Flash - Cortex-M0+ application image */
-place at start of IROM1_region  { block CM0P_RO };
-
-/* Flash - Cortex-M4 application */
-place in          IROM1_region  { block RO };
-
-/* Used for the digital signature of the secure application and the Bootloader SDK application. */
-".cy_app_signature" : place at address (__ICFEDIT_region_IROM1_end__ - 0x200) { section .cy_app_signature };
-
-/* Emulated EEPROM Flash area */
-".cy_em_eeprom" : place at start of IROM2_region  { section .cy_em_eeprom };
-
-/* Supervisory Flash - User Data */
-".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
-
-/* Supervisory Flash - NAR */
-".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
-
-/* Supervisory Flash - Public Key */
-".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
-
-/* Supervisory Flash - TOC2 */
-".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
-
-/* Supervisory Flash - RTOC2 */
-".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
-
-/* eFuse */
-".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
-
-/* Execute in Place (XIP). See the smif driver documentation for details. */
-"cy_xip" : place at start of EROM1_region  { block cy_xip };
-
-/* RAM */
-place at start of IRAM1_region  { readwrite section .intvec_ram};
-place in          IRAM1_region  { readwrite };
-place at end   of IRAM1_region  { block HSTACK };
-
-/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
-".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
-
-
-keep {  section .cy_m0p_image,
-        section .cy_app_signature,
-        section .cy_em_eeprom,
-        section .cy_sflash_user_data,
-        section .cy_sflash_nar,
-        section .cy_sflash_public_key,
-        section .cy_toc_part2,
-        section .cy_rtoc_part2,
-        section .cy_efuse,
-        section .cy_xip,
-        section .cymeta,
-         };
-
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-define exported symbol __cy_memory_0_start    = 0x10000000;
-define exported symbol __cy_memory_0_length   = 0x00100000;
-define exported symbol __cy_memory_0_row_size = 0x200;
-
-/* Emulated EEPROM Flash area */
-define exported symbol __cy_memory_1_start    = 0x14000000;
-define exported symbol __cy_memory_1_length   = 0x8000;
-define exported symbol __cy_memory_1_row_size = 0x200;
-
-/* Supervisory Flash */
-define exported symbol __cy_memory_2_start    = 0x16000000;
-define exported symbol __cy_memory_2_length   = 0x8000;
-define exported symbol __cy_memory_2_row_size = 0x200;
-
-/* XIP */
-define exported symbol __cy_memory_3_start    = 0x18000000;
-define exported symbol __cy_memory_3_length   = 0x08000000;
-define exported symbol __cy_memory_3_row_size = 0x200;
-
-/* eFuse */
-define exported symbol __cy_memory_4_start    = 0x90700000;
-define exported symbol __cy_memory_4_length   = 0x100000;
-define exported symbol __cy_memory_4_row_size = 1;
-
-/* EOF */
+/*******************************************************************************
+* \file cy8c6xx7_cm4_dual.icf
+* \version 2.91
+*
+* Linker file for the IAR compiler.
+*
+* The main purpose of the linker script is to describe how the sections in the
+* input files should be mapped into the output file, and to control the memory
+* layout of the output file.
+*
+* \note The entry point is fixed and starts at 0x10000000. The valid application
+* image should be placed there.
+*
+* \note The linker files included with the PDL template projects must be generic
+* and handle all common use cases. Your project may not use every section
+* defined in the linker files. In that case you may see warnings during the
+* build process. In your project, you can simply comment out or remove the
+* relevant code in the linker file.
+*
+********************************************************************************
+* \copyright
+* Copyright 2016-2021 Cypress Semiconductor Corporation
+* SPDX-License-Identifier: Apache-2.0
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*******************************************************************************/
+
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+
+/* The symbols below define the location and size of blocks of memory in the target.
+ * Use these symbols to specify the memory regions available for allocation.
+ */
+
+/* The following symbols control RAM and flash memory allocation for the CM4 core.
+ * You can change the memory allocation by editing RAM and Flash symbols.
+ * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+ * Using this memory region for other purposes will lead to unexpected behavior.
+ * Your changes must be aligned with the corresponding symbols for CM0+ core in 'xx_cm0plus.icf',
+ * where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.icf'.
+ */
+/* RAM */
+define symbol __ICFEDIT_region_IRAM1_start__ = 0x08002000;
+define symbol __ICFEDIT_region_IRAM1_end__   = 0x080477FF;
+
+/* Flash */
+define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
+define symbol __ICFEDIT_region_IROM1_end__   = 0x100FFFFF;
+
+/* The following symbols define a 32K flash region used for EEPROM emulation.
+ * This region can also be used as the general purpose flash.
+ * You can assign sections to this memory region for only one of the cores.
+ * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
+ * Therefore, repurposing this memory region will prevent such middleware from operation.
+ */
+define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
+define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
+
+/* The following symbols define device specific memory regions and must not be changed. */
+/* Supervisory FLASH - User Data */
+define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
+define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
+
+/* Supervisory FLASH - Normal Access Restrictions (NAR) */
+define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
+define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
+
+/* Supervisory FLASH - Public Key */
+define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
+define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
+
+/* Supervisory FLASH - Table of Content # 2 */
+define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
+define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
+
+/* Supervisory FLASH - Table of Content # 2 Copy */
+define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
+define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
+
+/* eFuse */
+define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
+define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
+
+/* XIP */
+define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
+define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
+
+define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
+define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
+
+
+define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
+/*-Sizes-*/
+if (!isdefinedsymbol(__STACK_SIZE)) {
+  define symbol __ICFEDIT_size_cstack__ = 0x1000;
+} else {
+  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
+}
+define symbol __ICFEDIT_size_proc_stack__ = 0x0;
+
+/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
+if (!isdefinedsymbol(__HEAP_SIZE)) {
+    define symbol __ICFEDIT_size_heap__ = 0x0400;
+} else {
+  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
+}
+/**** End of ICF editor section. ###ICF###*/
+
+/* By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
+ * More about CM0+ prebuilt images, see here:
+ * https://github.com/cypresssemiconductorco/psoc6cm0p
+ */
+/* The size of the Cortex-M0+ application image */
+define symbol FLASH_CM0P_SIZE  = 0x2000;
+
+define memory mem with size = 4G;
+define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
+define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
+define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
+define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
+define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
+define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
+define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
+define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
+define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
+define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
+
+define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
+define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
+define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
+define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
+define block CM0P_RO with size = FLASH_CM0P_SIZE  { readonly section .cy_m0p_image };
+define block RO     {first section .intvec, readonly};
+
+define block cy_xip { section .cy_xip };
+
+/*-Initializations-*/
+initialize by copy { readwrite };
+do not initialize  { section .noinit, section .intvec_ram };
+
+/*-Placement-*/
+
+/* Flash - Cortex-M0+ application image */
+place at start of IROM1_region  { block CM0P_RO };
+
+/* Flash - Cortex-M4 application */
+place in          IROM1_region  { block RO };
+
+/* Used for the digital signature of the secure application and the Bootloader SDK application. */
+".cy_app_signature" : place at address (__ICFEDIT_region_IROM1_end__ - 0x200) { section .cy_app_signature };
+
+/* Emulated EEPROM Flash area */
+".cy_em_eeprom" : place at start of IROM2_region  { section .cy_em_eeprom };
+
+/* Supervisory Flash - User Data */
+".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
+
+/* Supervisory Flash - NAR */
+".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
+
+/* Supervisory Flash - Public Key */
+".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
+
+/* Supervisory Flash - TOC2 */
+".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
+
+/* Supervisory Flash - RTOC2 */
+".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
+
+/* eFuse */
+".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
+
+/* Execute in Place (XIP). See the smif driver documentation for details. */
+"cy_xip" : place at start of EROM1_region  { block cy_xip };
+
+/* RAM */
+place at start of IRAM1_region  { readwrite section .intvec_ram};
+place in          IRAM1_region  { readwrite };
+place at end   of IRAM1_region  { block HSTACK };
+
+/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
+".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
+
+
+keep {  section .cy_m0p_image,
+        section .cy_app_signature,
+        section .cy_em_eeprom,
+        section .cy_sflash_user_data,
+        section .cy_sflash_nar,
+        section .cy_sflash_public_key,
+        section .cy_toc_part2,
+        section .cy_rtoc_part2,
+        section .cy_efuse,
+        section .cy_xip,
+        section .cymeta,
+         };
+
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+define exported symbol __cy_memory_0_start    = 0x10000000;
+define exported symbol __cy_memory_0_length   = 0x00100000;
+define exported symbol __cy_memory_0_row_size = 0x200;
+
+/* Emulated EEPROM Flash area */
+define exported symbol __cy_memory_1_start    = 0x14000000;
+define exported symbol __cy_memory_1_length   = 0x8000;
+define exported symbol __cy_memory_1_row_size = 0x200;
+
+/* Supervisory Flash */
+define exported symbol __cy_memory_2_start    = 0x16000000;
+define exported symbol __cy_memory_2_length   = 0x8000;
+define exported symbol __cy_memory_2_row_size = 0x200;
+
+/* XIP */
+define exported symbol __cy_memory_3_start    = 0x18000000;
+define exported symbol __cy_memory_3_length   = 0x08000000;
+define exported symbol __cy_memory_3_row_size = 0x200;
+
+/* eFuse */
+define exported symbol __cy_memory_4_start    = 0x90700000;
+define exported symbol __cy_memory_4_length   = 0x100000;
+define exported symbol __cy_memory_4_row_size = 1;
+
+/* EOF */

bsp/Infineon/psoc6-cy8ckit-062-BLE/board/linker_scripts/link.sct

@@ -1,277 +1,277 @@
-#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m4
-; The first line specifies a preprocessor command that the linker invokes
-; to pass a scatter file through a C preprocessor.
-
-;*******************************************************************************
-;* \file cy8c6xx7_cm4_dual.sct
-;* \version 2.91
-;*
-;* Linker file for the ARMCC.
-;*
-;* The main purpose of the linker script is to describe how the sections in the
-;* input files should be mapped into the output file, and to control the memory
-;* layout of the output file.
-;*
-;* \note The entry point location is fixed and starts at 0x10000000. The valid
-;* application image should be placed there.
-;*
-;* \note The linker files included with the PDL template projects must be
-;* generic and handle all common use cases. Your project may not use every
-;* section defined in the linker files. In that case you may see the warnings
-;* during the build process: L6314W (no section matches pattern) and/or L6329W
-;* (pattern only matches removed unused sections). In your project, you can
-;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
-;* the linker, simply comment out or remove the relevant code in the linker
-;* file.
-;*
-;*******************************************************************************
-;* \copyright
-;* Copyright 2016-2021 Cypress Semiconductor Corporation
-;* SPDX-License-Identifier: Apache-2.0
-;*
-;* Licensed under the Apache License, Version 2.0 (the "License");
-;* you may not use this file except in compliance with the License.
-;* You may obtain a copy of the License at
-;*
-;*     http://www.apache.org/licenses/LICENSE-2.0
-;*
-;* Unless required by applicable law or agreed to in writing, software
-;* distributed under the License is distributed on an "AS IS" BASIS,
-;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-;* See the License for the specific language governing permissions and
-;* limitations under the License.
-;******************************************************************************/
-
-; The defines below describe the location and size of blocks of memory in the target.
-; Use these defines to specify the memory regions available for allocation.
-
-; The following defines control RAM and flash memory allocation for the CM4 core.
-; You can change the memory allocation by editing RAM and Flash defines.
-; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
-; Using this memory region for other purposes will lead to unexpected behavior.
-; Your changes must be aligned with the corresponding defines for CM0+ core in 'xx_cm0plus.scat',
-; where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.scat'.
-; RAM
-#define RAM_START               0x08002000
-#define RAM_SIZE                0x00045800
-; Flash
-#define FLASH_START             0x10000000
-#define FLASH_SIZE              0x00100000
-
-; The size of the stack section at the end of CM4 SRAM
-#define STACK_SIZE              0x00001000
-
-; By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
-; More about CM0+ prebuilt images, see here:
-; https://github.com/cypresssemiconductorco/psoc6cm0p
-; The size of the Cortex-M0+ application flash image
-#define FLASH_CM0P_SIZE         0x2000
-
-; The following defines describe a 32K flash region used for EEPROM emulation.
-; This region can also be used as the general purpose flash.
-; You can assign sections to this memory region for only one of the cores.
-; Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
-; Therefore, repurposing this memory region will prevent such middleware from operation.
-#define EM_EEPROM_START         0x14000000
-#define EM_EEPROM_SIZE          0x8000
-
-; The following defines describe device specific memory regions and must not be changed.
-; Supervisory flash: User data
-#define SFLASH_USER_DATA_START  0x16000800
-#define SFLASH_USER_DATA_SIZE   0x00000800
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-#define SFLASH_NAR_START        0x16001A00
-#define SFLASH_NAR_SIZE         0x00000200
-
-; Supervisory flash: Public Key
-#define SFLASH_PUBLIC_KEY_START 0x16005A00
-#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
-
-; Supervisory flash: Table of Content # 2
-#define SFLASH_TOC_2_START      0x16007C00
-#define SFLASH_TOC_2_SIZE       0x00000200
-
-; Supervisory flash: Table of Content # 2 Copy
-#define SFLASH_RTOC_2_START     0x16007E00
-#define SFLASH_RTOC_2_SIZE      0x00000200
-
-; External memory
-#define XIP_START               0x18000000
-#define XIP_SIZE                0x08000000
-
-; eFuse
-#define EFUSE_START             0x90700000
-#define EFUSE_SIZE              0x100000
-
-
-; Cortex-M0+ application flash image area
-LR_IROM FLASH_START FLASH_CM0P_SIZE
-{
-    .cy_m0p_image +0 FLASH_CM0P_SIZE
-    {
-        * (.cy_m0p_image)
-    }
-}
-
-; Cortex-M4 application flash area
-LR_IROM1 (FLASH_START + FLASH_CM0P_SIZE) (FLASH_SIZE - FLASH_CM0P_SIZE)
-{
-    ER_FLASH_VECTORS +0
-    {
-        * (RESET, +FIRST)
-    }
-
-    ER_FLASH_CODE +0 FIXED
-    {
-        * (InRoot$$Sections)
-        * (+RO)
-    }
-
-    ER_RAM_VECTORS RAM_START UNINIT
-    {
-        * (RESET_RAM, +FIRST)
-    }
-
-    RW_RAM_DATA +0
-    {
-        * (.cy_ramfunc)
-        * (+RW, +ZI)
-    }
-
-    ; Place variables in the section that should not be initialized during the
-    ; device startup.
-    RW_IRAM1 +0 UNINIT
-    {
-        * (.noinit)
-    }
-
-    ; Application heap area (HEAP)
-    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
-    { 
-    }
-
-    ; Stack region growing down
-    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
-    {
-    }
-
-    ; Used for the digital signature of the secure application and the
-    ; Bootloader SDK application. The size of the section depends on the required
-    ; data size.
-    .cy_app_signature (FLASH_START + FLASH_SIZE - 256) 256
-    {
-        * (.cy_app_signature)
-    }
-}
-
-
-; Emulated EEPROM Flash area
-LR_EM_EEPROM EM_EEPROM_START EM_EEPROM_SIZE
-{
-    .cy_em_eeprom +0
-    {
-        * (.cy_em_eeprom)
-    }
-}
-
-; Supervisory flash: User data
-LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
-{
-    .cy_sflash_user_data +0
-    {
-        * (.cy_sflash_user_data)
-    }
-}
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
-{
-    .cy_sflash_nar +0
-    {
-        * (.cy_sflash_nar)
-    }
-}
-
-; Supervisory flash: Public Key
-LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
-{
-    .cy_sflash_public_key +0
-    {
-        * (.cy_sflash_public_key)
-    }
-}
-
-; Supervisory flash: Table of Content # 2
-LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
-{
-    .cy_toc_part2 +0
-    {
-        * (.cy_toc_part2)
-    }
-}
-
-; Supervisory flash: Table of Content # 2 Copy
-LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
-{
-    .cy_rtoc_part2 +0
-    {
-        * (.cy_rtoc_part2)
-    }
-}
-
-
-; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
-LR_EROM XIP_START XIP_SIZE
-{
-    cy_xip +0
-    {
-        * (.cy_xip)
-    }
-}
-
-
-; eFuse
-LR_EFUSE EFUSE_START EFUSE_SIZE
-{
-    .cy_efuse +0
-    {
-        * (.cy_efuse)
-    }
-}
-
-
-; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
-CYMETA 0x90500000
-{
-    .cymeta +0 { * (.cymeta) }
-}
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-#define __cy_memory_0_start 0x10000000
-#define __cy_memory_0_length  0x00100000
-#define __cy_memory_0_row_size 0x200
-
-/* Emulated EEPROM Flash area */
-#define __cy_memory_1_start    0x14000000
-#define __cy_memory_1_length   0x8000
-#define __cy_memory_1_row_size 0x200
-
-/* Supervisory Flash */
-#define __cy_memory_2_start    0x16000000
-#define __cy_memory_2_length   0x8000
-#define __cy_memory_2_row_size 0x200
-
-/* XIP */
-#define __cy_memory_3_start    0x18000000
-#define __cy_memory_3_length   0x08000000
-#define __cy_memory_3_row_size 0x200
-
-/* eFuse */
-#define __cy_memory_4_start    0x90700000
-#define __cy_memory_4_length   0x100000
-#define __cy_memory_4_row_size 1
-
-
-/* [] END OF FILE */
+#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m4
+; The first line specifies a preprocessor command that the linker invokes
+; to pass a scatter file through a C preprocessor.
+
+;*******************************************************************************
+;* \file cy8c6xx7_cm4_dual.sct
+;* \version 2.91
+;*
+;* Linker file for the ARMCC.
+;*
+;* The main purpose of the linker script is to describe how the sections in the
+;* input files should be mapped into the output file, and to control the memory
+;* layout of the output file.
+;*
+;* \note The entry point location is fixed and starts at 0x10000000. The valid
+;* application image should be placed there.
+;*
+;* \note The linker files included with the PDL template projects must be
+;* generic and handle all common use cases. Your project may not use every
+;* section defined in the linker files. In that case you may see the warnings
+;* during the build process: L6314W (no section matches pattern) and/or L6329W
+;* (pattern only matches removed unused sections). In your project, you can
+;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
+;* the linker, simply comment out or remove the relevant code in the linker
+;* file.
+;*
+;*******************************************************************************
+;* \copyright
+;* Copyright 2016-2021 Cypress Semiconductor Corporation
+;* SPDX-License-Identifier: Apache-2.0
+;*
+;* Licensed under the Apache License, Version 2.0 (the "License");
+;* you may not use this file except in compliance with the License.
+;* You may obtain a copy of the License at
+;*
+;*     http://www.apache.org/licenses/LICENSE-2.0
+;*
+;* Unless required by applicable law or agreed to in writing, software
+;* distributed under the License is distributed on an "AS IS" BASIS,
+;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+;* See the License for the specific language governing permissions and
+;* limitations under the License.
+;******************************************************************************/
+
+; The defines below describe the location and size of blocks of memory in the target.
+; Use these defines to specify the memory regions available for allocation.
+
+; The following defines control RAM and flash memory allocation for the CM4 core.
+; You can change the memory allocation by editing RAM and Flash defines.
+; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+; Using this memory region for other purposes will lead to unexpected behavior.
+; Your changes must be aligned with the corresponding defines for CM0+ core in 'xx_cm0plus.scat',
+; where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.scat'.
+; RAM
+#define RAM_START               0x08002000
+#define RAM_SIZE                0x00045800
+; Flash
+#define FLASH_START             0x10000000
+#define FLASH_SIZE              0x00100000
+
+; The size of the stack section at the end of CM4 SRAM
+#define STACK_SIZE              0x00001000
+
+; By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
+; More about CM0+ prebuilt images, see here:
+; https://github.com/cypresssemiconductorco/psoc6cm0p
+; The size of the Cortex-M0+ application flash image
+#define FLASH_CM0P_SIZE         0x2000
+
+; The following defines describe a 32K flash region used for EEPROM emulation.
+; This region can also be used as the general purpose flash.
+; You can assign sections to this memory region for only one of the cores.
+; Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
+; Therefore, repurposing this memory region will prevent such middleware from operation.
+#define EM_EEPROM_START         0x14000000
+#define EM_EEPROM_SIZE          0x8000
+
+; The following defines describe device specific memory regions and must not be changed.
+; Supervisory flash: User data
+#define SFLASH_USER_DATA_START  0x16000800
+#define SFLASH_USER_DATA_SIZE   0x00000800
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+#define SFLASH_NAR_START        0x16001A00
+#define SFLASH_NAR_SIZE         0x00000200
+
+; Supervisory flash: Public Key
+#define SFLASH_PUBLIC_KEY_START 0x16005A00
+#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
+
+; Supervisory flash: Table of Content # 2
+#define SFLASH_TOC_2_START      0x16007C00
+#define SFLASH_TOC_2_SIZE       0x00000200
+
+; Supervisory flash: Table of Content # 2 Copy
+#define SFLASH_RTOC_2_START     0x16007E00
+#define SFLASH_RTOC_2_SIZE      0x00000200
+
+; External memory
+#define XIP_START               0x18000000
+#define XIP_SIZE                0x08000000
+
+; eFuse
+#define EFUSE_START             0x90700000
+#define EFUSE_SIZE              0x100000
+
+
+; Cortex-M0+ application flash image area
+LR_IROM FLASH_START FLASH_CM0P_SIZE
+{
+    .cy_m0p_image +0 FLASH_CM0P_SIZE
+    {
+        * (.cy_m0p_image)
+    }
+}
+
+; Cortex-M4 application flash area
+LR_IROM1 (FLASH_START + FLASH_CM0P_SIZE) (FLASH_SIZE - FLASH_CM0P_SIZE)
+{
+    ER_FLASH_VECTORS +0
+    {
+        * (RESET, +FIRST)
+    }
+
+    ER_FLASH_CODE +0 FIXED
+    {
+        * (InRoot$$Sections)
+        * (+RO)
+    }
+
+    ER_RAM_VECTORS RAM_START UNINIT
+    {
+        * (RESET_RAM, +FIRST)
+    }
+
+    RW_RAM_DATA +0
+    {
+        * (.cy_ramfunc)
+        * (+RW, +ZI)
+    }
+
+    ; Place variables in the section that should not be initialized during the
+    ; device startup.
+    RW_IRAM1 +0 UNINIT
+    {
+        * (.noinit)
+    }
+
+    ; Application heap area (HEAP)
+    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
+    {
+    }
+
+    ; Stack region growing down
+    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
+    {
+    }
+
+    ; Used for the digital signature of the secure application and the
+    ; Bootloader SDK application. The size of the section depends on the required
+    ; data size.
+    .cy_app_signature (FLASH_START + FLASH_SIZE - 256) 256
+    {
+        * (.cy_app_signature)
+    }
+}
+
+
+; Emulated EEPROM Flash area
+LR_EM_EEPROM EM_EEPROM_START EM_EEPROM_SIZE
+{
+    .cy_em_eeprom +0
+    {
+        * (.cy_em_eeprom)
+    }
+}
+
+; Supervisory flash: User data
+LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
+{
+    .cy_sflash_user_data +0
+    {
+        * (.cy_sflash_user_data)
+    }
+}
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
+{
+    .cy_sflash_nar +0
+    {
+        * (.cy_sflash_nar)
+    }
+}
+
+; Supervisory flash: Public Key
+LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
+{
+    .cy_sflash_public_key +0
+    {
+        * (.cy_sflash_public_key)
+    }
+}
+
+; Supervisory flash: Table of Content # 2
+LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
+{
+    .cy_toc_part2 +0
+    {
+        * (.cy_toc_part2)
+    }
+}
+
+; Supervisory flash: Table of Content # 2 Copy
+LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
+{
+    .cy_rtoc_part2 +0
+    {
+        * (.cy_rtoc_part2)
+    }
+}
+
+
+; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
+LR_EROM XIP_START XIP_SIZE
+{
+    cy_xip +0
+    {
+        * (.cy_xip)
+    }
+}
+
+
+; eFuse
+LR_EFUSE EFUSE_START EFUSE_SIZE
+{
+    .cy_efuse +0
+    {
+        * (.cy_efuse)
+    }
+}
+
+
+; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
+CYMETA 0x90500000
+{
+    .cymeta +0 { * (.cymeta) }
+}
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+#define __cy_memory_0_start 0x10000000
+#define __cy_memory_0_length  0x00100000
+#define __cy_memory_0_row_size 0x200
+
+/* Emulated EEPROM Flash area */
+#define __cy_memory_1_start    0x14000000
+#define __cy_memory_1_length   0x8000
+#define __cy_memory_1_row_size 0x200
+
+/* Supervisory Flash */
+#define __cy_memory_2_start    0x16000000
+#define __cy_memory_2_length   0x8000
+#define __cy_memory_2_row_size 0x200
+
+/* XIP */
+#define __cy_memory_3_start    0x18000000
+#define __cy_memory_3_length   0x08000000
+#define __cy_memory_3_row_size 0x200
+
+/* eFuse */
+#define __cy_memory_4_start    0x90700000
+#define __cy_memory_4_length   0x100000
+#define __cy_memory_4_row_size 1
+
+
+/* [] END OF FILE */

bsp/Infineon/psoc6-cy8ckit-062-BLE/libs/TARGET_CY8CKIT-062-BLE/COMPONENT_CM0P/TOOLCHAIN_ARM/cy8c6xx7_cm0plus.sct

@@ -1,272 +1,272 @@
-#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m0
-; The first line specifies a preprocessor command that the linker invokes
-; to pass a scatter file through a C preprocessor.
-
-;*******************************************************************************
-;* \file cy8c6xx7_cm0plus.sct
-;* \version 2.91
-;*
-;* Linker file for the ARMCC.
-;*
-;* The main purpose of the linker script is to describe how the sections in the
-;* input files should be mapped into the output file, and to control the memory
-;* layout of the output file.
-;*
-;* \note The entry point location is fixed and starts at 0x10000000. The valid
-;* application image should be placed there.
-;*
-;* \note The linker files included with the PDL template projects must be
-;* generic and handle all common use cases. Your project may not use every
-;* section defined in the linker files. In that case you may see the warnings
-;* during the build process: L6314W (no section matches pattern) and/or L6329W
-;* (pattern only matches removed unused sections). In your project, you can
-;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
-;* the linker, simply comment out or remove the relevant code in the linker
-;* file.
-;*
-;*******************************************************************************
-;* \copyright
-;* Copyright 2016-2021 Cypress Semiconductor Corporation
-;* SPDX-License-Identifier: Apache-2.0
-;*
-;* Licensed under the Apache License, Version 2.0 (the "License");
-;* you may not use this file except in compliance with the License.
-;* You may obtain a copy of the License at
-;*
-;*     http://www.apache.org/licenses/LICENSE-2.0
-;*
-;* Unless required by applicable law or agreed to in writing, software
-;* distributed under the License is distributed on an "AS IS" BASIS,
-;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-;* See the License for the specific language governing permissions and
-;* limitations under the License.
-;******************************************************************************/
-
-; The defines below describe the location and size of blocks of memory in the target.
-; Use these defines to specify the memory regions available for allocation.
-
-; The following defines control RAM and flash memory allocation for the CM0+ core.
-; You can change the memory allocation by editing the RAM and Flash defines.
-; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
-; Using this memory region for other purposes will lead to unexpected behavior.
-; Your changes must be aligned with the corresponding defines for the CM4 core in 'xx_cm4_dual.scat',
-; where 'xx' is the device group; for example, 'cy8c6xx7_cm4_dual.scat'.
-; RAM
-#define RAM_START               0x08000000
-#define RAM_SIZE                0x00002000
-; Flash
-#define FLASH_START             0x10000000
-#define FLASH_SIZE              0x00002000
-
-; The size of the stack section at the end of CM0+ SRAM
-#define STACK_SIZE              0x00001000
-
-; The following defines describe a 32K flash region used for EEPROM emulation.
-; This region can also be used as the general purpose flash.
-; You can assign sections to this memory region for only one of the cores.
-; Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
-; Therefore, repurposing this memory region will prevent such middleware from operation.
-#define EM_EEPROM_START         0x14000000
-#define EM_EEPROM_SIZE          0x8000
-
-; The following defines describe device specific memory regions and must not be changed.
-; Supervisory flash: User data
-#define SFLASH_USER_DATA_START  0x16000800
-#define SFLASH_USER_DATA_SIZE   0x00000800
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-#define SFLASH_NAR_START        0x16001A00
-#define SFLASH_NAR_SIZE         0x00000200
-
-; Supervisory flash: Public Key
-#define SFLASH_PUBLIC_KEY_START 0x16005A00
-#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
-
-; Supervisory flash: Table of Content # 2
-#define SFLASH_TOC_2_START      0x16007C00
-#define SFLASH_TOC_2_SIZE       0x00000200
-
-; Supervisory flash: Table of Content # 2 Copy
-#define SFLASH_RTOC_2_START     0x16007E00
-#define SFLASH_RTOC_2_SIZE      0x00000200
-
-; External memory
-#define XIP_START               0x18000000
-#define XIP_SIZE                0x08000000
-
-; eFuse
-#define EFUSE_START             0x90700000
-#define EFUSE_SIZE              0x100000
-
-; Public RAM 
-; This is an unprotected public RAM region, with the placed .cy_sharedmem section.
-; This region is used to place objects that require full access from both cores.
-; Uncomment the following lines, define the region size and uncomment placement of
-; .cy_sharedmem section below.
-; #define PUBLIC_RAM_SIZE         %REGION_SIZE%
-; #define PUBLIC_RAM_START        (RAM_START + RAM_SIZE - STACK_SIZE - PUBLIC_RAM_SIZE)
-
-; Cortex-M0+ application flash area
-LR_IROM1 FLASH_START FLASH_SIZE
-{
-    .cy_app_header +0
-    {
-        * (.cy_app_header)
-    }
-
-    ER_FLASH_VECTORS +0
-    {
-        * (RESET, +FIRST)
-    }
-
-    ER_FLASH_CODE +0 FIXED
-    {
-        * (InRoot$$Sections)
-        * (+RO)
-    }
-
-    ER_RAM_VECTORS RAM_START UNINIT
-    {
-        * (RESET_RAM, +FIRST)
-    }
-
-    RW_RAM_DATA +0
-    {
-        * (.cy_ramfunc)
-        * (+RW, +ZI)
-    }
-
-    ; Place variables in the section that should not be initialized during the
-    ; device startup.
-    RW_IRAM1 +0 UNINIT
-    {
-        * (.noinit)
-    }
-
-    ; To use unprotected public RAM uncomment the following .cy_sharedmem section placement. Recalculate the HEAP start address.
-    ;RW_IRAM2 PUBLIC_RAM_START UNINIT
-    ;{
-    ;    * (.cy_sharedmem)
-    ;}
-
-    ; Application heap area (HEAP)
-    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
-    { 
-    }
-
-    ; Stack region growing down
-    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
-    {
-    }
-}
-
-
-; Emulated EEPROM Flash area
-LR_EM_EEPROM EM_EEPROM_START EM_EEPROM_SIZE
-{
-    .cy_em_eeprom +0
-    {
-        * (.cy_em_eeprom)
-    }
-}
-
-; Supervisory flash: User data
-LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
-{
-    .cy_sflash_user_data +0
-    {
-        * (.cy_sflash_user_data)
-    }
-}
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
-{
-    .cy_sflash_nar +0
-    {
-        * (.cy_sflash_nar)
-    }
-}
-
-; Supervisory flash: Public Key
-LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
-{
-    .cy_sflash_public_key +0
-    {
-        * (.cy_sflash_public_key)
-    }
-}
-
-; Supervisory flash: Table of Content # 2
-LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
-{
-    .cy_toc_part2 +0
-    {
-        * (.cy_toc_part2)
-    }
-}
-
-; Supervisory flash: Table of Content # 2 Copy
-LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
-{
-    .cy_rtoc_part2 +0
-    {
-        * (.cy_rtoc_part2)
-    }
-}
-
-
-; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
-LR_EROM XIP_START XIP_SIZE
-{
-    cy_xip +0
-    {
-        * (.cy_xip)
-    }
-}
-
-
-; eFuse
-LR_EFUSE EFUSE_START EFUSE_SIZE
-{
-    .cy_efuse +0
-    {
-        * (.cy_efuse)
-    }
-}
-
-
-; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
-CYMETA 0x90500000
-{
-    .cymeta +0 { * (.cymeta) }
-}
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-#define __cy_memory_0_start 0x10000000
-#define __cy_memory_0_length  0x00100000
-#define __cy_memory_0_row_size 0x200
-
-/* Emulated EEPROM Flash area */
-#define __cy_memory_1_start    0x14000000
-#define __cy_memory_1_length   0x8000
-#define __cy_memory_1_row_size 0x200
-
-/* Supervisory Flash */
-#define __cy_memory_2_start    0x16000000
-#define __cy_memory_2_length   0x8000
-#define __cy_memory_2_row_size 0x200
-
-/* XIP */
-#define __cy_memory_3_start    0x18000000
-#define __cy_memory_3_length   0x08000000
-#define __cy_memory_3_row_size 0x200
-
-/* eFuse */
-#define __cy_memory_4_start    0x90700000
-#define __cy_memory_4_length   0x100000
-#define __cy_memory_4_row_size 1
-
-
-/* [] END OF FILE */
+#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m0
+; The first line specifies a preprocessor command that the linker invokes
+; to pass a scatter file through a C preprocessor.
+
+;*******************************************************************************
+;* \file cy8c6xx7_cm0plus.sct
+;* \version 2.91
+;*
+;* Linker file for the ARMCC.
+;*
+;* The main purpose of the linker script is to describe how the sections in the
+;* input files should be mapped into the output file, and to control the memory
+;* layout of the output file.
+;*
+;* \note The entry point location is fixed and starts at 0x10000000. The valid
+;* application image should be placed there.
+;*
+;* \note The linker files included with the PDL template projects must be
+;* generic and handle all common use cases. Your project may not use every
+;* section defined in the linker files. In that case you may see the warnings
+;* during the build process: L6314W (no section matches pattern) and/or L6329W
+;* (pattern only matches removed unused sections). In your project, you can
+;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
+;* the linker, simply comment out or remove the relevant code in the linker
+;* file.
+;*
+;*******************************************************************************
+;* \copyright
+;* Copyright 2016-2021 Cypress Semiconductor Corporation
+;* SPDX-License-Identifier: Apache-2.0
+;*
+;* Licensed under the Apache License, Version 2.0 (the "License");
+;* you may not use this file except in compliance with the License.
+;* You may obtain a copy of the License at
+;*
+;*     http://www.apache.org/licenses/LICENSE-2.0
+;*
+;* Unless required by applicable law or agreed to in writing, software
+;* distributed under the License is distributed on an "AS IS" BASIS,
+;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+;* See the License for the specific language governing permissions and
+;* limitations under the License.
+;******************************************************************************/
+
+; The defines below describe the location and size of blocks of memory in the target.
+; Use these defines to specify the memory regions available for allocation.
+
+; The following defines control RAM and flash memory allocation for the CM0+ core.
+; You can change the memory allocation by editing the RAM and Flash defines.
+; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+; Using this memory region for other purposes will lead to unexpected behavior.
+; Your changes must be aligned with the corresponding defines for the CM4 core in 'xx_cm4_dual.scat',
+; where 'xx' is the device group; for example, 'cy8c6xx7_cm4_dual.scat'.
+; RAM
+#define RAM_START               0x08000000
+#define RAM_SIZE                0x00002000
+; Flash
+#define FLASH_START             0x10000000
+#define FLASH_SIZE              0x00002000
+
+; The size of the stack section at the end of CM0+ SRAM
+#define STACK_SIZE              0x00001000
+
+; The following defines describe a 32K flash region used for EEPROM emulation.
+; This region can also be used as the general purpose flash.
+; You can assign sections to this memory region for only one of the cores.
+; Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
+; Therefore, repurposing this memory region will prevent such middleware from operation.
+#define EM_EEPROM_START         0x14000000
+#define EM_EEPROM_SIZE          0x8000
+
+; The following defines describe device specific memory regions and must not be changed.
+; Supervisory flash: User data
+#define SFLASH_USER_DATA_START  0x16000800
+#define SFLASH_USER_DATA_SIZE   0x00000800
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+#define SFLASH_NAR_START        0x16001A00
+#define SFLASH_NAR_SIZE         0x00000200
+
+; Supervisory flash: Public Key
+#define SFLASH_PUBLIC_KEY_START 0x16005A00
+#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
+
+; Supervisory flash: Table of Content # 2
+#define SFLASH_TOC_2_START      0x16007C00
+#define SFLASH_TOC_2_SIZE       0x00000200
+
+; Supervisory flash: Table of Content # 2 Copy
+#define SFLASH_RTOC_2_START     0x16007E00
+#define SFLASH_RTOC_2_SIZE      0x00000200
+
+; External memory
+#define XIP_START               0x18000000
+#define XIP_SIZE                0x08000000
+
+; eFuse
+#define EFUSE_START             0x90700000
+#define EFUSE_SIZE              0x100000
+
+; Public RAM
+; This is an unprotected public RAM region, with the placed .cy_sharedmem section.
+; This region is used to place objects that require full access from both cores.
+; Uncomment the following lines, define the region size and uncomment placement of
+; .cy_sharedmem section below.
+; #define PUBLIC_RAM_SIZE         %REGION_SIZE%
+; #define PUBLIC_RAM_START        (RAM_START + RAM_SIZE - STACK_SIZE - PUBLIC_RAM_SIZE)
+
+; Cortex-M0+ application flash area
+LR_IROM1 FLASH_START FLASH_SIZE
+{
+    .cy_app_header +0
+    {
+        * (.cy_app_header)
+    }
+
+    ER_FLASH_VECTORS +0
+    {
+        * (RESET, +FIRST)
+    }
+
+    ER_FLASH_CODE +0 FIXED
+    {
+        * (InRoot$$Sections)
+        * (+RO)
+    }
+
+    ER_RAM_VECTORS RAM_START UNINIT
+    {
+        * (RESET_RAM, +FIRST)
+    }
+
+    RW_RAM_DATA +0
+    {
+        * (.cy_ramfunc)
+        * (+RW, +ZI)
+    }
+
+    ; Place variables in the section that should not be initialized during the
+    ; device startup.
+    RW_IRAM1 +0 UNINIT
+    {
+        * (.noinit)
+    }
+
+    ; To use unprotected public RAM uncomment the following .cy_sharedmem section placement. Recalculate the HEAP start address.
+    ;RW_IRAM2 PUBLIC_RAM_START UNINIT
+    ;{
+    ;    * (.cy_sharedmem)
+    ;}
+
+    ; Application heap area (HEAP)
+    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
+    {
+    }
+
+    ; Stack region growing down
+    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
+    {
+    }
+}
+
+
+; Emulated EEPROM Flash area
+LR_EM_EEPROM EM_EEPROM_START EM_EEPROM_SIZE
+{
+    .cy_em_eeprom +0
+    {
+        * (.cy_em_eeprom)
+    }
+}
+
+; Supervisory flash: User data
+LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
+{
+    .cy_sflash_user_data +0
+    {
+        * (.cy_sflash_user_data)
+    }
+}
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
+{
+    .cy_sflash_nar +0
+    {
+        * (.cy_sflash_nar)
+    }
+}
+
+; Supervisory flash: Public Key
+LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
+{
+    .cy_sflash_public_key +0
+    {
+        * (.cy_sflash_public_key)
+    }
+}
+
+; Supervisory flash: Table of Content # 2
+LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
+{
+    .cy_toc_part2 +0
+    {
+        * (.cy_toc_part2)
+    }
+}
+
+; Supervisory flash: Table of Content # 2 Copy
+LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
+{
+    .cy_rtoc_part2 +0
+    {
+        * (.cy_rtoc_part2)
+    }
+}
+
+
+; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
+LR_EROM XIP_START XIP_SIZE
+{
+    cy_xip +0
+    {
+        * (.cy_xip)
+    }
+}
+
+
+; eFuse
+LR_EFUSE EFUSE_START EFUSE_SIZE
+{
+    .cy_efuse +0
+    {
+        * (.cy_efuse)
+    }
+}
+
+
+; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
+CYMETA 0x90500000
+{
+    .cymeta +0 { * (.cymeta) }
+}
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+#define __cy_memory_0_start 0x10000000
+#define __cy_memory_0_length  0x00100000
+#define __cy_memory_0_row_size 0x200
+
+/* Emulated EEPROM Flash area */
+#define __cy_memory_1_start    0x14000000
+#define __cy_memory_1_length   0x8000
+#define __cy_memory_1_row_size 0x200
+
+/* Supervisory Flash */
+#define __cy_memory_2_start    0x16000000
+#define __cy_memory_2_length   0x8000
+#define __cy_memory_2_row_size 0x200
+
+/* XIP */
+#define __cy_memory_3_start    0x18000000
+#define __cy_memory_3_length   0x08000000
+#define __cy_memory_3_row_size 0x200
+
+/* eFuse */
+#define __cy_memory_4_start    0x90700000
+#define __cy_memory_4_length   0x100000
+#define __cy_memory_4_row_size 1
+
+
+/* [] END OF FILE */

bsp/Infineon/psoc6-cy8ckit-062-BLE/libs/TARGET_CY8CKIT-062-BLE/COMPONENT_CM0P/TOOLCHAIN_IAR/cy8c6xx7_cm0plus.icf

@@ -1,253 +1,253 @@
-/*******************************************************************************
-* \file cy8c6xx7_cm0plus.icf
-* \version 2.91
-*
-* Linker file for the IAR compiler.
-*
-* The main purpose of the linker script is to describe how the sections in the
-* input files should be mapped into the output file, and to control the memory
-* layout of the output file.
-*
-* \note The entry point is fixed and starts at 0x10000000. The valid application
-* image should be placed there.
-*
-* \note The linker files included with the PDL template projects must be generic
-* and handle all common use cases. Your project may not use every section
-* defined in the linker files. In that case you may see warnings during the
-* build process. In your project, you can simply comment out or remove the
-* relevant code in the linker file.
-*
-********************************************************************************
-* \copyright
-* Copyright 2016-2021 Cypress Semiconductor Corporation
-* SPDX-License-Identifier: Apache-2.0
-*
-* Licensed under the Apache License, Version 2.0 (the "License");
-* you may not use this file except in compliance with the License.
-* You may obtain a copy of the License at
-*
-*     http://www.apache.org/licenses/LICENSE-2.0
-*
-* Unless required by applicable law or agreed to in writing, software
-* distributed under the License is distributed on an "AS IS" BASIS,
-* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-* See the License for the specific language governing permissions and
-* limitations under the License.
-*******************************************************************************/
-
-/*###ICF### Section handled by ICF editor, don't touch! ****/
-/*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
-/*-Specials-*/
-define symbol __ICFEDIT_intvec_start__ = 0x00000000;
-
-/*-Sizes-*/
-if (!isdefinedsymbol(__STACK_SIZE)) {
-  define symbol __ICFEDIT_size_cstack__ = 0x1000;
-} else {
-  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
-}
-define symbol __ICFEDIT_size_proc_stack__ = 0x0;
-
-/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
-if (!isdefinedsymbol(__HEAP_SIZE)) {
-    define symbol __ICFEDIT_size_heap__ = 0x0400;
-} else {
-  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
-}
-
-/* The symbols below define the location and size of blocks of memory in the target.
- * Use these symbols to specify the memory regions available for allocation.
- */
-
-/* The following symbols control RAM and flash memory allocation for the CM0+ core.
- * You can change the memory allocation by editing RAM and Flash symbols.
- * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
- * Using this memory region for other purposes will lead to unexpected behavior.
- * Your changes must be aligned with the corresponding symbols for CM4 core in 'xx_cm4_dual.icf',
- * where 'xx' is the device group; for example, 'cy8c6xx7_cm4_dual.icf'.
- */
-/* RAM */
-define symbol __ICFEDIT_region_IRAM1_start__ = 0x08000000;
-define symbol __ICFEDIT_region_IRAM1_end__   = 0x08001FFF;
-
-/* Flash */
-define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
-define symbol __ICFEDIT_region_IROM1_end__   = 0x10001FFF;
-
-/* The following symbols define a 32K flash region used for EEPROM emulation.
- * This region can also be used as the general purpose flash.
- * You can assign sections to this memory region for only one of the cores.
- * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
- * Therefore, repurposing this memory region will prevent such middleware from operation.
- */
-define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
-define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
-
-/* The following symbols define device specific memory regions and must not be changed. */
-/* Supervisory FLASH - User Data */
-define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
-define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
-
-/* Supervisory FLASH - Normal Access Restrictions (NAR) */
-define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
-define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
-
-/* Supervisory FLASH - Public Key */
-define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
-define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
-
-/* Supervisory FLASH - Table of Content # 2 */
-define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
-define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
-
-/* Supervisory FLASH - Table of Content # 2 Copy */
-define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
-define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
-
-/* eFuse */
-define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
-define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
-
-/* XIP */
-define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
-define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
-
-define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
-define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
-
-
-define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
-/**** End of ICF editor section. ###ICF###*/
-
-
-define memory mem with size = 4G;
-define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
-define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
-define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
-define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
-define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
-define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
-define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
-define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
-define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
-define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
-
-/* Public RAM 
- * This is an unprotected public RAM region, with the placed .cy_sharedmem section.
- * This region is used to place objects that require full access from both cores.
- * Uncomment the following lines, define region size, and uncomment the placement of
- * .cy_sharedmem section below in the IRAM2_region. Also define the __ICFEDIT_region_IRAM2_start__
- *  and __ICFEDIT_region_IRAM2_end__ to place the IRAM2_region.
- */
-/*
-define region IRAM2_region = mem:[from __ICFEDIT_region_IRAM2_start__ to __ICFEDIT_region_IRAM2_end__];
-*/
-
-define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
-define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
-define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
-define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
-define block RO     {first section .intvec, readonly};
-
-define block cy_xip { section .cy_xip };
-
-/*-Initializations-*/
-initialize by copy { readwrite };
-do not initialize  { section .noinit, section .intvec_ram };
-
-/*-Placement-*/
-
-/* Flash - Cortex-M0+ application */
-".cy_app_header" : place at start of IROM1_region  { section .cy_app_header };
-place in          IROM1_region  { block RO };
-
-/* Emulated EEPROM Flash area */
-".cy_em_eeprom" : place at start of IROM2_region  { section .cy_em_eeprom };
-
-/* Supervisory Flash - User Data */
-".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
-
-/* Supervisory Flash - NAR */
-".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
-
-/* Supervisory Flash - Public Key */
-".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
-
-/* Supervisory Flash - TOC2 */
-".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
-
-/* Supervisory Flash - RTOC2 */
-".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
-
-/* eFuse */
-".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
-
-/* Execute in Place (XIP). See the smif driver documentation for details. */
-"cy_xip" : place at start of EROM1_region  { block cy_xip };
-
-/* RAM */
-place at start of IRAM1_region  { readwrite section .intvec_ram};
-place in          IRAM1_region  { readwrite };
-place at end   of IRAM1_region  { block HSTACK };
-
-/* Public RAM 
- *To use unprotected public RAM, uncomment the following .cy_sharedmem section placement.
- */
-/*
-place at start of IRAM2_region  { section .cy_sharedmem };
-*/
-
-/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
-".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
-
-
-keep {  section .cy_app_header,
-        section .cy_em_eeprom,
-        section .cy_sflash_user_data,
-        section .cy_sflash_nar,
-        section .cy_sflash_public_key,
-        section .cy_toc_part2,
-        section .cy_rtoc_part2,
-        section .cy_efuse,
-        section .cy_xip,
-        section .cymeta,
-         };
-
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-define exported symbol __cy_memory_0_start    = 0x10000000;
-define exported symbol __cy_memory_0_length   = 0x00100000;
-define exported symbol __cy_memory_0_row_size = 0x200;
-
-/* Emulated EEPROM Flash area */
-define exported symbol __cy_memory_1_start    = 0x14000000;
-define exported symbol __cy_memory_1_length   = 0x8000;
-define exported symbol __cy_memory_1_row_size = 0x200;
-
-/* Supervisory Flash */
-define exported symbol __cy_memory_2_start    = 0x16000000;
-define exported symbol __cy_memory_2_length   = 0x8000;
-define exported symbol __cy_memory_2_row_size = 0x200;
-
-/* XIP */
-define exported symbol __cy_memory_3_start    = 0x18000000;
-define exported symbol __cy_memory_3_length   = 0x08000000;
-define exported symbol __cy_memory_3_row_size = 0x200;
-
-/* eFuse */
-define exported symbol __cy_memory_4_start    = 0x90700000;
-define exported symbol __cy_memory_4_length   = 0x100000;
-define exported symbol __cy_memory_4_row_size = 1;
-
-/* EOF */
+/*******************************************************************************
+* \file cy8c6xx7_cm0plus.icf
+* \version 2.91
+*
+* Linker file for the IAR compiler.
+*
+* The main purpose of the linker script is to describe how the sections in the
+* input files should be mapped into the output file, and to control the memory
+* layout of the output file.
+*
+* \note The entry point is fixed and starts at 0x10000000. The valid application
+* image should be placed there.
+*
+* \note The linker files included with the PDL template projects must be generic
+* and handle all common use cases. Your project may not use every section
+* defined in the linker files. In that case you may see warnings during the
+* build process. In your project, you can simply comment out or remove the
+* relevant code in the linker file.
+*
+********************************************************************************
+* \copyright
+* Copyright 2016-2021 Cypress Semiconductor Corporation
+* SPDX-License-Identifier: Apache-2.0
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*******************************************************************************/
+
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+
+/*-Sizes-*/
+if (!isdefinedsymbol(__STACK_SIZE)) {
+  define symbol __ICFEDIT_size_cstack__ = 0x1000;
+} else {
+  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
+}
+define symbol __ICFEDIT_size_proc_stack__ = 0x0;
+
+/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
+if (!isdefinedsymbol(__HEAP_SIZE)) {
+    define symbol __ICFEDIT_size_heap__ = 0x0400;
+} else {
+  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
+}
+
+/* The symbols below define the location and size of blocks of memory in the target.
+ * Use these symbols to specify the memory regions available for allocation.
+ */
+
+/* The following symbols control RAM and flash memory allocation for the CM0+ core.
+ * You can change the memory allocation by editing RAM and Flash symbols.
+ * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+ * Using this memory region for other purposes will lead to unexpected behavior.
+ * Your changes must be aligned with the corresponding symbols for CM4 core in 'xx_cm4_dual.icf',
+ * where 'xx' is the device group; for example, 'cy8c6xx7_cm4_dual.icf'.
+ */
+/* RAM */
+define symbol __ICFEDIT_region_IRAM1_start__ = 0x08000000;
+define symbol __ICFEDIT_region_IRAM1_end__   = 0x08001FFF;
+
+/* Flash */
+define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
+define symbol __ICFEDIT_region_IROM1_end__   = 0x10001FFF;
+
+/* The following symbols define a 32K flash region used for EEPROM emulation.
+ * This region can also be used as the general purpose flash.
+ * You can assign sections to this memory region for only one of the cores.
+ * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
+ * Therefore, repurposing this memory region will prevent such middleware from operation.
+ */
+define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
+define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
+
+/* The following symbols define device specific memory regions and must not be changed. */
+/* Supervisory FLASH - User Data */
+define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
+define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
+
+/* Supervisory FLASH - Normal Access Restrictions (NAR) */
+define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
+define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
+
+/* Supervisory FLASH - Public Key */
+define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
+define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
+
+/* Supervisory FLASH - Table of Content # 2 */
+define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
+define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
+
+/* Supervisory FLASH - Table of Content # 2 Copy */
+define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
+define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
+
+/* eFuse */
+define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
+define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
+
+/* XIP */
+define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
+define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
+
+define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
+define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
+
+
+define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
+define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
+define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
+define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
+define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
+define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
+define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
+define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
+define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
+define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
+
+/* Public RAM
+ * This is an unprotected public RAM region, with the placed .cy_sharedmem section.
+ * This region is used to place objects that require full access from both cores.
+ * Uncomment the following lines, define region size, and uncomment the placement of
+ * .cy_sharedmem section below in the IRAM2_region. Also define the __ICFEDIT_region_IRAM2_start__
+ *  and __ICFEDIT_region_IRAM2_end__ to place the IRAM2_region.
+ */
+/*
+define region IRAM2_region = mem:[from __ICFEDIT_region_IRAM2_start__ to __ICFEDIT_region_IRAM2_end__];
+*/
+
+define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
+define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
+define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
+define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
+define block RO     {first section .intvec, readonly};
+
+define block cy_xip { section .cy_xip };
+
+/*-Initializations-*/
+initialize by copy { readwrite };
+do not initialize  { section .noinit, section .intvec_ram };
+
+/*-Placement-*/
+
+/* Flash - Cortex-M0+ application */
+".cy_app_header" : place at start of IROM1_region  { section .cy_app_header };
+place in          IROM1_region  { block RO };
+
+/* Emulated EEPROM Flash area */
+".cy_em_eeprom" : place at start of IROM2_region  { section .cy_em_eeprom };
+
+/* Supervisory Flash - User Data */
+".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
+
+/* Supervisory Flash - NAR */
+".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
+
+/* Supervisory Flash - Public Key */
+".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
+
+/* Supervisory Flash - TOC2 */
+".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
+
+/* Supervisory Flash - RTOC2 */
+".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
+
+/* eFuse */
+".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
+
+/* Execute in Place (XIP). See the smif driver documentation for details. */
+"cy_xip" : place at start of EROM1_region  { block cy_xip };
+
+/* RAM */
+place at start of IRAM1_region  { readwrite section .intvec_ram};
+place in          IRAM1_region  { readwrite };
+place at end   of IRAM1_region  { block HSTACK };
+
+/* Public RAM
+ *To use unprotected public RAM, uncomment the following .cy_sharedmem section placement.
+ */
+/*
+place at start of IRAM2_region  { section .cy_sharedmem };
+*/
+
+/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
+".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
+
+
+keep {  section .cy_app_header,
+        section .cy_em_eeprom,
+        section .cy_sflash_user_data,
+        section .cy_sflash_nar,
+        section .cy_sflash_public_key,
+        section .cy_toc_part2,
+        section .cy_rtoc_part2,
+        section .cy_efuse,
+        section .cy_xip,
+        section .cymeta,
+         };
+
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+define exported symbol __cy_memory_0_start    = 0x10000000;
+define exported symbol __cy_memory_0_length   = 0x00100000;
+define exported symbol __cy_memory_0_row_size = 0x200;
+
+/* Emulated EEPROM Flash area */
+define exported symbol __cy_memory_1_start    = 0x14000000;
+define exported symbol __cy_memory_1_length   = 0x8000;
+define exported symbol __cy_memory_1_row_size = 0x200;
+
+/* Supervisory Flash */
+define exported symbol __cy_memory_2_start    = 0x16000000;
+define exported symbol __cy_memory_2_length   = 0x8000;
+define exported symbol __cy_memory_2_row_size = 0x200;
+
+/* XIP */
+define exported symbol __cy_memory_3_start    = 0x18000000;
+define exported symbol __cy_memory_3_length   = 0x08000000;
+define exported symbol __cy_memory_3_row_size = 0x200;
+
+/* eFuse */
+define exported symbol __cy_memory_4_start    = 0x90700000;
+define exported symbol __cy_memory_4_length   = 0x100000;
+define exported symbol __cy_memory_4_row_size = 1;
+
+/* EOF */

bsp/Infineon/psoc6-cy8ckit-062-BLE/libs/TARGET_CY8CKIT-062-BLE/COMPONENT_CM4/TOOLCHAIN_ARM/cy8c6xx7_cm4_dual.sct

@@ -1,277 +1,277 @@
-#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m4
-; The first line specifies a preprocessor command that the linker invokes
-; to pass a scatter file through a C preprocessor.
-
-;*******************************************************************************
-;* \file cy8c6xx7_cm4_dual.sct
-;* \version 2.91
-;*
-;* Linker file for the ARMCC.
-;*
-;* The main purpose of the linker script is to describe how the sections in the
-;* input files should be mapped into the output file, and to control the memory
-;* layout of the output file.
-;*
-;* \note The entry point location is fixed and starts at 0x10000000. The valid
-;* application image should be placed there.
-;*
-;* \note The linker files included with the PDL template projects must be
-;* generic and handle all common use cases. Your project may not use every
-;* section defined in the linker files. In that case you may see the warnings
-;* during the build process: L6314W (no section matches pattern) and/or L6329W
-;* (pattern only matches removed unused sections). In your project, you can
-;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
-;* the linker, simply comment out or remove the relevant code in the linker
-;* file.
-;*
-;*******************************************************************************
-;* \copyright
-;* Copyright 2016-2021 Cypress Semiconductor Corporation
-;* SPDX-License-Identifier: Apache-2.0
-;*
-;* Licensed under the Apache License, Version 2.0 (the "License");
-;* you may not use this file except in compliance with the License.
-;* You may obtain a copy of the License at
-;*
-;*     http://www.apache.org/licenses/LICENSE-2.0
-;*
-;* Unless required by applicable law or agreed to in writing, software
-;* distributed under the License is distributed on an "AS IS" BASIS,
-;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-;* See the License for the specific language governing permissions and
-;* limitations under the License.
-;******************************************************************************/
-
-; The defines below describe the location and size of blocks of memory in the target.
-; Use these defines to specify the memory regions available for allocation.
-
-; The following defines control RAM and flash memory allocation for the CM4 core.
-; You can change the memory allocation by editing RAM and Flash defines.
-; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
-; Using this memory region for other purposes will lead to unexpected behavior.
-; Your changes must be aligned with the corresponding defines for CM0+ core in 'xx_cm0plus.scat',
-; where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.scat'.
-; RAM
-#define RAM_START               0x08002000
-#define RAM_SIZE                0x00045800
-; Flash
-#define FLASH_START             0x10000000
-#define FLASH_SIZE              0x00100000
-
-; The size of the stack section at the end of CM4 SRAM
-#define STACK_SIZE              0x00001000
-
-; By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
-; More about CM0+ prebuilt images, see here:
-; https://github.com/cypresssemiconductorco/psoc6cm0p
-; The size of the Cortex-M0+ application flash image
-#define FLASH_CM0P_SIZE         0x2000
-
-; The following defines describe a 32K flash region used for EEPROM emulation.
-; This region can also be used as the general purpose flash.
-; You can assign sections to this memory region for only one of the cores.
-; Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
-; Therefore, repurposing this memory region will prevent such middleware from operation.
-#define EM_EEPROM_START         0x14000000
-#define EM_EEPROM_SIZE          0x8000
-
-; The following defines describe device specific memory regions and must not be changed.
-; Supervisory flash: User data
-#define SFLASH_USER_DATA_START  0x16000800
-#define SFLASH_USER_DATA_SIZE   0x00000800
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-#define SFLASH_NAR_START        0x16001A00
-#define SFLASH_NAR_SIZE         0x00000200
-
-; Supervisory flash: Public Key
-#define SFLASH_PUBLIC_KEY_START 0x16005A00
-#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
-
-; Supervisory flash: Table of Content # 2
-#define SFLASH_TOC_2_START      0x16007C00
-#define SFLASH_TOC_2_SIZE       0x00000200
-
-; Supervisory flash: Table of Content # 2 Copy
-#define SFLASH_RTOC_2_START     0x16007E00
-#define SFLASH_RTOC_2_SIZE      0x00000200
-
-; External memory
-#define XIP_START               0x18000000
-#define XIP_SIZE                0x08000000
-
-; eFuse
-#define EFUSE_START             0x90700000
-#define EFUSE_SIZE              0x100000
-
-
-; Cortex-M0+ application flash image area
-LR_IROM FLASH_START FLASH_CM0P_SIZE
-{
-    .cy_m0p_image +0 FLASH_CM0P_SIZE
-    {
-        * (.cy_m0p_image)
-    }
-}
-
-; Cortex-M4 application flash area
-LR_IROM1 (FLASH_START + FLASH_CM0P_SIZE) (FLASH_SIZE - FLASH_CM0P_SIZE)
-{
-    ER_FLASH_VECTORS +0
-    {
-        * (RESET, +FIRST)
-    }
-
-    ER_FLASH_CODE +0 FIXED
-    {
-        * (InRoot$$Sections)
-        * (+RO)
-    }
-
-    ER_RAM_VECTORS RAM_START UNINIT
-    {
-        * (RESET_RAM, +FIRST)
-    }
-
-    RW_RAM_DATA +0
-    {
-        * (.cy_ramfunc)
-        * (+RW, +ZI)
-    }
-
-    ; Place variables in the section that should not be initialized during the
-    ; device startup.
-    RW_IRAM1 +0 UNINIT
-    {
-        * (.noinit)
-    }
-
-    ; Application heap area (HEAP)
-    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
-    { 
-    }
-
-    ; Stack region growing down
-    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
-    {
-    }
-
-    ; Used for the digital signature of the secure application and the
-    ; Bootloader SDK application. The size of the section depends on the required
-    ; data size.
-    .cy_app_signature (FLASH_START + FLASH_SIZE - 256) 256
-    {
-        * (.cy_app_signature)
-    }
-}
-
-
-; Emulated EEPROM Flash area
-LR_EM_EEPROM EM_EEPROM_START EM_EEPROM_SIZE
-{
-    .cy_em_eeprom +0
-    {
-        * (.cy_em_eeprom)
-    }
-}
-
-; Supervisory flash: User data
-LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
-{
-    .cy_sflash_user_data +0
-    {
-        * (.cy_sflash_user_data)
-    }
-}
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
-{
-    .cy_sflash_nar +0
-    {
-        * (.cy_sflash_nar)
-    }
-}
-
-; Supervisory flash: Public Key
-LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
-{
-    .cy_sflash_public_key +0
-    {
-        * (.cy_sflash_public_key)
-    }
-}
-
-; Supervisory flash: Table of Content # 2
-LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
-{
-    .cy_toc_part2 +0
-    {
-        * (.cy_toc_part2)
-    }
-}
-
-; Supervisory flash: Table of Content # 2 Copy
-LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
-{
-    .cy_rtoc_part2 +0
-    {
-        * (.cy_rtoc_part2)
-    }
-}
-
-
-; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
-LR_EROM XIP_START XIP_SIZE
-{
-    cy_xip +0
-    {
-        * (.cy_xip)
-    }
-}
-
-
-; eFuse
-LR_EFUSE EFUSE_START EFUSE_SIZE
-{
-    .cy_efuse +0
-    {
-        * (.cy_efuse)
-    }
-}
-
-
-; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
-CYMETA 0x90500000
-{
-    .cymeta +0 { * (.cymeta) }
-}
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-#define __cy_memory_0_start 0x10000000
-#define __cy_memory_0_length  0x00100000
-#define __cy_memory_0_row_size 0x200
-
-/* Emulated EEPROM Flash area */
-#define __cy_memory_1_start    0x14000000
-#define __cy_memory_1_length   0x8000
-#define __cy_memory_1_row_size 0x200
-
-/* Supervisory Flash */
-#define __cy_memory_2_start    0x16000000
-#define __cy_memory_2_length   0x8000
-#define __cy_memory_2_row_size 0x200
-
-/* XIP */
-#define __cy_memory_3_start    0x18000000
-#define __cy_memory_3_length   0x08000000
-#define __cy_memory_3_row_size 0x200
-
-/* eFuse */
-#define __cy_memory_4_start    0x90700000
-#define __cy_memory_4_length   0x100000
-#define __cy_memory_4_row_size 1
-
-
-/* [] END OF FILE */
+#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m4
+; The first line specifies a preprocessor command that the linker invokes
+; to pass a scatter file through a C preprocessor.
+
+;*******************************************************************************
+;* \file cy8c6xx7_cm4_dual.sct
+;* \version 2.91
+;*
+;* Linker file for the ARMCC.
+;*
+;* The main purpose of the linker script is to describe how the sections in the
+;* input files should be mapped into the output file, and to control the memory
+;* layout of the output file.
+;*
+;* \note The entry point location is fixed and starts at 0x10000000. The valid
+;* application image should be placed there.
+;*
+;* \note The linker files included with the PDL template projects must be
+;* generic and handle all common use cases. Your project may not use every
+;* section defined in the linker files. In that case you may see the warnings
+;* during the build process: L6314W (no section matches pattern) and/or L6329W
+;* (pattern only matches removed unused sections). In your project, you can
+;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
+;* the linker, simply comment out or remove the relevant code in the linker
+;* file.
+;*
+;*******************************************************************************
+;* \copyright
+;* Copyright 2016-2021 Cypress Semiconductor Corporation
+;* SPDX-License-Identifier: Apache-2.0
+;*
+;* Licensed under the Apache License, Version 2.0 (the "License");
+;* you may not use this file except in compliance with the License.
+;* You may obtain a copy of the License at
+;*
+;*     http://www.apache.org/licenses/LICENSE-2.0
+;*
+;* Unless required by applicable law or agreed to in writing, software
+;* distributed under the License is distributed on an "AS IS" BASIS,
+;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+;* See the License for the specific language governing permissions and
+;* limitations under the License.
+;******************************************************************************/
+
+; The defines below describe the location and size of blocks of memory in the target.
+; Use these defines to specify the memory regions available for allocation.
+
+; The following defines control RAM and flash memory allocation for the CM4 core.
+; You can change the memory allocation by editing RAM and Flash defines.
+; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+; Using this memory region for other purposes will lead to unexpected behavior.
+; Your changes must be aligned with the corresponding defines for CM0+ core in 'xx_cm0plus.scat',
+; where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.scat'.
+; RAM
+#define RAM_START               0x08002000
+#define RAM_SIZE                0x00045800
+; Flash
+#define FLASH_START             0x10000000
+#define FLASH_SIZE              0x00100000
+
+; The size of the stack section at the end of CM4 SRAM
+#define STACK_SIZE              0x00001000
+
+; By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
+; More about CM0+ prebuilt images, see here:
+; https://github.com/cypresssemiconductorco/psoc6cm0p
+; The size of the Cortex-M0+ application flash image
+#define FLASH_CM0P_SIZE         0x2000
+
+; The following defines describe a 32K flash region used for EEPROM emulation.
+; This region can also be used as the general purpose flash.
+; You can assign sections to this memory region for only one of the cores.
+; Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
+; Therefore, repurposing this memory region will prevent such middleware from operation.
+#define EM_EEPROM_START         0x14000000
+#define EM_EEPROM_SIZE          0x8000
+
+; The following defines describe device specific memory regions and must not be changed.
+; Supervisory flash: User data
+#define SFLASH_USER_DATA_START  0x16000800
+#define SFLASH_USER_DATA_SIZE   0x00000800
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+#define SFLASH_NAR_START        0x16001A00
+#define SFLASH_NAR_SIZE         0x00000200
+
+; Supervisory flash: Public Key
+#define SFLASH_PUBLIC_KEY_START 0x16005A00
+#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
+
+; Supervisory flash: Table of Content # 2
+#define SFLASH_TOC_2_START      0x16007C00
+#define SFLASH_TOC_2_SIZE       0x00000200
+
+; Supervisory flash: Table of Content # 2 Copy
+#define SFLASH_RTOC_2_START     0x16007E00
+#define SFLASH_RTOC_2_SIZE      0x00000200
+
+; External memory
+#define XIP_START               0x18000000
+#define XIP_SIZE                0x08000000
+
+; eFuse
+#define EFUSE_START             0x90700000
+#define EFUSE_SIZE              0x100000
+
+
+; Cortex-M0+ application flash image area
+LR_IROM FLASH_START FLASH_CM0P_SIZE
+{
+    .cy_m0p_image +0 FLASH_CM0P_SIZE
+    {
+        * (.cy_m0p_image)
+    }
+}
+
+; Cortex-M4 application flash area
+LR_IROM1 (FLASH_START + FLASH_CM0P_SIZE) (FLASH_SIZE - FLASH_CM0P_SIZE)
+{
+    ER_FLASH_VECTORS +0
+    {
+        * (RESET, +FIRST)
+    }
+
+    ER_FLASH_CODE +0 FIXED
+    {
+        * (InRoot$$Sections)
+        * (+RO)
+    }
+
+    ER_RAM_VECTORS RAM_START UNINIT
+    {
+        * (RESET_RAM, +FIRST)
+    }
+
+    RW_RAM_DATA +0
+    {
+        * (.cy_ramfunc)
+        * (+RW, +ZI)
+    }
+
+    ; Place variables in the section that should not be initialized during the
+    ; device startup.
+    RW_IRAM1 +0 UNINIT
+    {
+        * (.noinit)
+    }
+
+    ; Application heap area (HEAP)
+    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
+    {
+    }
+
+    ; Stack region growing down
+    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
+    {
+    }
+
+    ; Used for the digital signature of the secure application and the
+    ; Bootloader SDK application. The size of the section depends on the required
+    ; data size.
+    .cy_app_signature (FLASH_START + FLASH_SIZE - 256) 256
+    {
+        * (.cy_app_signature)
+    }
+}
+
+
+; Emulated EEPROM Flash area
+LR_EM_EEPROM EM_EEPROM_START EM_EEPROM_SIZE
+{
+    .cy_em_eeprom +0
+    {
+        * (.cy_em_eeprom)
+    }
+}
+
+; Supervisory flash: User data
+LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
+{
+    .cy_sflash_user_data +0
+    {
+        * (.cy_sflash_user_data)
+    }
+}
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
+{
+    .cy_sflash_nar +0
+    {
+        * (.cy_sflash_nar)
+    }
+}
+
+; Supervisory flash: Public Key
+LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
+{
+    .cy_sflash_public_key +0
+    {
+        * (.cy_sflash_public_key)
+    }
+}
+
+; Supervisory flash: Table of Content # 2
+LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
+{
+    .cy_toc_part2 +0
+    {
+        * (.cy_toc_part2)
+    }
+}
+
+; Supervisory flash: Table of Content # 2 Copy
+LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
+{
+    .cy_rtoc_part2 +0
+    {
+        * (.cy_rtoc_part2)
+    }
+}
+
+
+; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
+LR_EROM XIP_START XIP_SIZE
+{
+    cy_xip +0
+    {
+        * (.cy_xip)
+    }
+}
+
+
+; eFuse
+LR_EFUSE EFUSE_START EFUSE_SIZE
+{
+    .cy_efuse +0
+    {
+        * (.cy_efuse)
+    }
+}
+
+
+; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
+CYMETA 0x90500000
+{
+    .cymeta +0 { * (.cymeta) }
+}
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+#define __cy_memory_0_start 0x10000000
+#define __cy_memory_0_length  0x00100000
+#define __cy_memory_0_row_size 0x200
+
+/* Emulated EEPROM Flash area */
+#define __cy_memory_1_start    0x14000000
+#define __cy_memory_1_length   0x8000
+#define __cy_memory_1_row_size 0x200
+
+/* Supervisory Flash */
+#define __cy_memory_2_start    0x16000000
+#define __cy_memory_2_length   0x8000
+#define __cy_memory_2_row_size 0x200
+
+/* XIP */
+#define __cy_memory_3_start    0x18000000
+#define __cy_memory_3_length   0x08000000
+#define __cy_memory_3_row_size 0x200
+
+/* eFuse */
+#define __cy_memory_4_start    0x90700000
+#define __cy_memory_4_length   0x100000
+#define __cy_memory_4_row_size 1
+
+
+/* [] END OF FILE */

bsp/Infineon/psoc6-cy8ckit-062-BLE/libs/TARGET_CY8CKIT-062-BLE/COMPONENT_CM4/TOOLCHAIN_IAR/cy8c6xx7_cm4_dual.icf

@@ -1,247 +1,247 @@
-/*******************************************************************************
-* \file cy8c6xx7_cm4_dual.icf
-* \version 2.91
-*
-* Linker file for the IAR compiler.
-*
-* The main purpose of the linker script is to describe how the sections in the
-* input files should be mapped into the output file, and to control the memory
-* layout of the output file.
-*
-* \note The entry point is fixed and starts at 0x10000000. The valid application
-* image should be placed there.
-*
-* \note The linker files included with the PDL template projects must be generic
-* and handle all common use cases. Your project may not use every section
-* defined in the linker files. In that case you may see warnings during the
-* build process. In your project, you can simply comment out or remove the
-* relevant code in the linker file.
-*
-********************************************************************************
-* \copyright
-* Copyright 2016-2021 Cypress Semiconductor Corporation
-* SPDX-License-Identifier: Apache-2.0
-*
-* Licensed under the Apache License, Version 2.0 (the "License");
-* you may not use this file except in compliance with the License.
-* You may obtain a copy of the License at
-*
-*     http://www.apache.org/licenses/LICENSE-2.0
-*
-* Unless required by applicable law or agreed to in writing, software
-* distributed under the License is distributed on an "AS IS" BASIS,
-* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-* See the License for the specific language governing permissions and
-* limitations under the License.
-*******************************************************************************/
-
-/*###ICF### Section handled by ICF editor, don't touch! ****/
-/*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
-/*-Specials-*/
-define symbol __ICFEDIT_intvec_start__ = 0x00000000;
-
-/* The symbols below define the location and size of blocks of memory in the target.
- * Use these symbols to specify the memory regions available for allocation.
- */
-
-/* The following symbols control RAM and flash memory allocation for the CM4 core.
- * You can change the memory allocation by editing RAM and Flash symbols.
- * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
- * Using this memory region for other purposes will lead to unexpected behavior.
- * Your changes must be aligned with the corresponding symbols for CM0+ core in 'xx_cm0plus.icf',
- * where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.icf'.
- */
-/* RAM */
-define symbol __ICFEDIT_region_IRAM1_start__ = 0x08002000;
-define symbol __ICFEDIT_region_IRAM1_end__   = 0x080477FF;
-
-/* Flash */
-define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
-define symbol __ICFEDIT_region_IROM1_end__   = 0x100FFFFF;
-
-/* The following symbols define a 32K flash region used for EEPROM emulation.
- * This region can also be used as the general purpose flash.
- * You can assign sections to this memory region for only one of the cores.
- * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
- * Therefore, repurposing this memory region will prevent such middleware from operation.
- */
-define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
-define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
-
-/* The following symbols define device specific memory regions and must not be changed. */
-/* Supervisory FLASH - User Data */
-define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
-define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
-
-/* Supervisory FLASH - Normal Access Restrictions (NAR) */
-define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
-define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
-
-/* Supervisory FLASH - Public Key */
-define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
-define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
-
-/* Supervisory FLASH - Table of Content # 2 */
-define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
-define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
-
-/* Supervisory FLASH - Table of Content # 2 Copy */
-define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
-define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
-
-/* eFuse */
-define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
-define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
-
-/* XIP */
-define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
-define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
-
-define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
-define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
-
-
-define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
-/*-Sizes-*/
-if (!isdefinedsymbol(__STACK_SIZE)) {
-  define symbol __ICFEDIT_size_cstack__ = 0x1000;
-} else {
-  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
-}
-define symbol __ICFEDIT_size_proc_stack__ = 0x0;
-
-/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
-if (!isdefinedsymbol(__HEAP_SIZE)) {
-    define symbol __ICFEDIT_size_heap__ = 0x0400;
-} else {
-  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
-}
-/**** End of ICF editor section. ###ICF###*/
-
-/* By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
- * More about CM0+ prebuilt images, see here:
- * https://github.com/cypresssemiconductorco/psoc6cm0p
- */
-/* The size of the Cortex-M0+ application image */
-define symbol FLASH_CM0P_SIZE  = 0x2000;
-
-define memory mem with size = 4G;
-define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
-define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
-define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
-define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
-define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
-define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
-define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
-define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
-define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
-define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
-
-define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
-define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
-define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
-define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
-define block CM0P_RO with size = FLASH_CM0P_SIZE  { readonly section .cy_m0p_image };
-define block RO     {first section .intvec, readonly};
-
-define block cy_xip { section .cy_xip };
-
-/*-Initializations-*/
-initialize by copy { readwrite };
-do not initialize  { section .noinit, section .intvec_ram };
-
-/*-Placement-*/
-
-/* Flash - Cortex-M0+ application image */
-place at start of IROM1_region  { block CM0P_RO };
-
-/* Flash - Cortex-M4 application */
-place in          IROM1_region  { block RO };
-
-/* Used for the digital signature of the secure application and the Bootloader SDK application. */
-".cy_app_signature" : place at address (__ICFEDIT_region_IROM1_end__ - 0x200) { section .cy_app_signature };
-
-/* Emulated EEPROM Flash area */
-".cy_em_eeprom" : place at start of IROM2_region  { section .cy_em_eeprom };
-
-/* Supervisory Flash - User Data */
-".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
-
-/* Supervisory Flash - NAR */
-".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
-
-/* Supervisory Flash - Public Key */
-".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
-
-/* Supervisory Flash - TOC2 */
-".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
-
-/* Supervisory Flash - RTOC2 */
-".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
-
-/* eFuse */
-".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
-
-/* Execute in Place (XIP). See the smif driver documentation for details. */
-"cy_xip" : place at start of EROM1_region  { block cy_xip };
-
-/* RAM */
-place at start of IRAM1_region  { readwrite section .intvec_ram};
-place in          IRAM1_region  { readwrite };
-place at end   of IRAM1_region  { block HSTACK };
-
-/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
-".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
-
-
-keep {  section .cy_m0p_image,
-        section .cy_app_signature,
-        section .cy_em_eeprom,
-        section .cy_sflash_user_data,
-        section .cy_sflash_nar,
-        section .cy_sflash_public_key,
-        section .cy_toc_part2,
-        section .cy_rtoc_part2,
-        section .cy_efuse,
-        section .cy_xip,
-        section .cymeta,
-         };
-
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-define exported symbol __cy_memory_0_start    = 0x10000000;
-define exported symbol __cy_memory_0_length   = 0x00100000;
-define exported symbol __cy_memory_0_row_size = 0x200;
-
-/* Emulated EEPROM Flash area */
-define exported symbol __cy_memory_1_start    = 0x14000000;
-define exported symbol __cy_memory_1_length   = 0x8000;
-define exported symbol __cy_memory_1_row_size = 0x200;
-
-/* Supervisory Flash */
-define exported symbol __cy_memory_2_start    = 0x16000000;
-define exported symbol __cy_memory_2_length   = 0x8000;
-define exported symbol __cy_memory_2_row_size = 0x200;
-
-/* XIP */
-define exported symbol __cy_memory_3_start    = 0x18000000;
-define exported symbol __cy_memory_3_length   = 0x08000000;
-define exported symbol __cy_memory_3_row_size = 0x200;
-
-/* eFuse */
-define exported symbol __cy_memory_4_start    = 0x90700000;
-define exported symbol __cy_memory_4_length   = 0x100000;
-define exported symbol __cy_memory_4_row_size = 1;
-
-/* EOF */
+/*******************************************************************************
+* \file cy8c6xx7_cm4_dual.icf
+* \version 2.91
+*
+* Linker file for the IAR compiler.
+*
+* The main purpose of the linker script is to describe how the sections in the
+* input files should be mapped into the output file, and to control the memory
+* layout of the output file.
+*
+* \note The entry point is fixed and starts at 0x10000000. The valid application
+* image should be placed there.
+*
+* \note The linker files included with the PDL template projects must be generic
+* and handle all common use cases. Your project may not use every section
+* defined in the linker files. In that case you may see warnings during the
+* build process. In your project, you can simply comment out or remove the
+* relevant code in the linker file.
+*
+********************************************************************************
+* \copyright
+* Copyright 2016-2021 Cypress Semiconductor Corporation
+* SPDX-License-Identifier: Apache-2.0
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*******************************************************************************/
+
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+
+/* The symbols below define the location and size of blocks of memory in the target.
+ * Use these symbols to specify the memory regions available for allocation.
+ */
+
+/* The following symbols control RAM and flash memory allocation for the CM4 core.
+ * You can change the memory allocation by editing RAM and Flash symbols.
+ * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+ * Using this memory region for other purposes will lead to unexpected behavior.
+ * Your changes must be aligned with the corresponding symbols for CM0+ core in 'xx_cm0plus.icf',
+ * where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.icf'.
+ */
+/* RAM */
+define symbol __ICFEDIT_region_IRAM1_start__ = 0x08002000;
+define symbol __ICFEDIT_region_IRAM1_end__   = 0x080477FF;
+
+/* Flash */
+define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
+define symbol __ICFEDIT_region_IROM1_end__   = 0x100FFFFF;
+
+/* The following symbols define a 32K flash region used for EEPROM emulation.
+ * This region can also be used as the general purpose flash.
+ * You can assign sections to this memory region for only one of the cores.
+ * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
+ * Therefore, repurposing this memory region will prevent such middleware from operation.
+ */
+define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
+define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
+
+/* The following symbols define device specific memory regions and must not be changed. */
+/* Supervisory FLASH - User Data */
+define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
+define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
+
+/* Supervisory FLASH - Normal Access Restrictions (NAR) */
+define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
+define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
+
+/* Supervisory FLASH - Public Key */
+define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
+define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
+
+/* Supervisory FLASH - Table of Content # 2 */
+define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
+define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
+
+/* Supervisory FLASH - Table of Content # 2 Copy */
+define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
+define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
+
+/* eFuse */
+define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
+define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
+
+/* XIP */
+define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
+define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
+
+define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
+define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
+
+
+define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
+/*-Sizes-*/
+if (!isdefinedsymbol(__STACK_SIZE)) {
+  define symbol __ICFEDIT_size_cstack__ = 0x1000;
+} else {
+  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
+}
+define symbol __ICFEDIT_size_proc_stack__ = 0x0;
+
+/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
+if (!isdefinedsymbol(__HEAP_SIZE)) {
+    define symbol __ICFEDIT_size_heap__ = 0x0400;
+} else {
+  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
+}
+/**** End of ICF editor section. ###ICF###*/
+
+/* By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
+ * More about CM0+ prebuilt images, see here:
+ * https://github.com/cypresssemiconductorco/psoc6cm0p
+ */
+/* The size of the Cortex-M0+ application image */
+define symbol FLASH_CM0P_SIZE  = 0x2000;
+
+define memory mem with size = 4G;
+define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
+define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
+define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
+define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
+define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
+define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
+define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
+define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
+define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
+define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
+
+define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
+define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
+define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
+define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
+define block CM0P_RO with size = FLASH_CM0P_SIZE  { readonly section .cy_m0p_image };
+define block RO     {first section .intvec, readonly};
+
+define block cy_xip { section .cy_xip };
+
+/*-Initializations-*/
+initialize by copy { readwrite };
+do not initialize  { section .noinit, section .intvec_ram };
+
+/*-Placement-*/
+
+/* Flash - Cortex-M0+ application image */
+place at start of IROM1_region  { block CM0P_RO };
+
+/* Flash - Cortex-M4 application */
+place in          IROM1_region  { block RO };
+
+/* Used for the digital signature of the secure application and the Bootloader SDK application. */
+".cy_app_signature" : place at address (__ICFEDIT_region_IROM1_end__ - 0x200) { section .cy_app_signature };
+
+/* Emulated EEPROM Flash area */
+".cy_em_eeprom" : place at start of IROM2_region  { section .cy_em_eeprom };
+
+/* Supervisory Flash - User Data */
+".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
+
+/* Supervisory Flash - NAR */
+".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
+
+/* Supervisory Flash - Public Key */
+".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
+
+/* Supervisory Flash - TOC2 */
+".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
+
+/* Supervisory Flash - RTOC2 */
+".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
+
+/* eFuse */
+".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
+
+/* Execute in Place (XIP). See the smif driver documentation for details. */
+"cy_xip" : place at start of EROM1_region  { block cy_xip };
+
+/* RAM */
+place at start of IRAM1_region  { readwrite section .intvec_ram};
+place in          IRAM1_region  { readwrite };
+place at end   of IRAM1_region  { block HSTACK };
+
+/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
+".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
+
+
+keep {  section .cy_m0p_image,
+        section .cy_app_signature,
+        section .cy_em_eeprom,
+        section .cy_sflash_user_data,
+        section .cy_sflash_nar,
+        section .cy_sflash_public_key,
+        section .cy_toc_part2,
+        section .cy_rtoc_part2,
+        section .cy_efuse,
+        section .cy_xip,
+        section .cymeta,
+         };
+
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+define exported symbol __cy_memory_0_start    = 0x10000000;
+define exported symbol __cy_memory_0_length   = 0x00100000;
+define exported symbol __cy_memory_0_row_size = 0x200;
+
+/* Emulated EEPROM Flash area */
+define exported symbol __cy_memory_1_start    = 0x14000000;
+define exported symbol __cy_memory_1_length   = 0x8000;
+define exported symbol __cy_memory_1_row_size = 0x200;
+
+/* Supervisory Flash */
+define exported symbol __cy_memory_2_start    = 0x16000000;
+define exported symbol __cy_memory_2_length   = 0x8000;
+define exported symbol __cy_memory_2_row_size = 0x200;
+
+/* XIP */
+define exported symbol __cy_memory_3_start    = 0x18000000;
+define exported symbol __cy_memory_3_length   = 0x08000000;
+define exported symbol __cy_memory_3_row_size = 0x200;
+
+/* eFuse */
+define exported symbol __cy_memory_4_start    = 0x90700000;
+define exported symbol __cy_memory_4_length   = 0x100000;
+define exported symbol __cy_memory_4_row_size = 1;
+
+/* EOF */

bsp/Infineon/psoc6-cy8ckit-062-WIFI-BT/board/linker_scripts/link.icf

@@ -1,247 +1,247 @@
-/*******************************************************************************
-* \file cy8c6xx7_cm4_dual.icf
-* \version 2.95.1
-*
-* Linker file for the IAR compiler.
-*
-* The main purpose of the linker script is to describe how the sections in the
-* input files should be mapped into the output file, and to control the memory
-* layout of the output file.
-*
-* \note The entry point is fixed and starts at 0x10000000. The valid application
-* image should be placed there.
-*
-* \note The linker files included with the PDL template projects must be generic
-* and handle all common use cases. Your project may not use every section
-* defined in the linker files. In that case you may see warnings during the
-* build process. In your project, you can simply comment out or remove the
-* relevant code in the linker file.
-*
-********************************************************************************
-* \copyright
-* Copyright 2016-2021 Cypress Semiconductor Corporation
-* SPDX-License-Identifier: Apache-2.0
-*
-* Licensed under the Apache License, Version 2.0 (the "License");
-* you may not use this file except in compliance with the License.
-* You may obtain a copy of the License at
-*
-*     http://www.apache.org/licenses/LICENSE-2.0
-*
-* Unless required by applicable law or agreed to in writing, software
-* distributed under the License is distributed on an "AS IS" BASIS,
-* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-* See the License for the specific language governing permissions and
-* limitations under the License.
-*******************************************************************************/
-
-/*###ICF### Section handled by ICF editor, don't touch! ****/
-/*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
-/*-Specials-*/
-define symbol __ICFEDIT_intvec_start__ = 0x00000000;
-
-/* The symbols below define the location and size of blocks of memory in the target.
- * Use these symbols to specify the memory regions available for allocation.
- */
-
-/* The following symbols control RAM and flash memory allocation for the CM4 core.
- * You can change the memory allocation by editing RAM and Flash symbols.
- * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
- * Using this memory region for other purposes will lead to unexpected behavior.
- * Your changes must be aligned with the corresponding symbols for CM0+ core in 'xx_cm0plus.icf',
- * where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.icf'.
- */
-/* RAM */
-define symbol __ICFEDIT_region_IRAM1_start__ = 0x08002000;
-define symbol __ICFEDIT_region_IRAM1_end__   = 0x080477FF;
-
-/* Flash */
-define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
-define symbol __ICFEDIT_region_IROM1_end__   = 0x100FFFFF;
-
-/* The following symbols define a 32K flash region used for EEPROM emulation.
- * This region can also be used as the general purpose flash.
- * You can assign sections to this memory region for only one of the cores.
- * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
- * Therefore, repurposing this memory region will prevent such middleware from operation.
- */
-define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
-define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
-
-/* The following symbols define device specific memory regions and must not be changed. */
-/* Supervisory FLASH - User Data */
-define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
-define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
-
-/* Supervisory FLASH - Normal Access Restrictions (NAR) */
-define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
-define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
-
-/* Supervisory FLASH - Public Key */
-define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
-define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
-
-/* Supervisory FLASH - Table of Content # 2 */
-define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
-define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
-
-/* Supervisory FLASH - Table of Content # 2 Copy */
-define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
-define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
-
-/* eFuse */
-define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
-define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
-
-/* XIP */
-define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
-define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
-
-define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
-define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
-
-
-define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
-/*-Sizes-*/
-if (!isdefinedsymbol(__STACK_SIZE)) {
-  define symbol __ICFEDIT_size_cstack__ = 0x1000;
-} else {
-  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
-}
-define symbol __ICFEDIT_size_proc_stack__ = 0x0;
-
-/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
-if (!isdefinedsymbol(__HEAP_SIZE)) {
-    define symbol __ICFEDIT_size_heap__ = 0x0400;
-} else {
-  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
-}
-/**** End of ICF editor section. ###ICF###*/
-
-/* By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
- * More about CM0+ prebuilt images, see here:
- * https://github.com/cypresssemiconductorco/psoc6cm0p
- */
-/* The size of the Cortex-M0+ application image */
-define symbol FLASH_CM0P_SIZE  = 0x2000;
-
-define memory mem with size = 4G;
-define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
-define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
-define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
-define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
-define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
-define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
-define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
-define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
-define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
-define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
-
-define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
-define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
-define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
-define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
-define block CM0P_RO with size = FLASH_CM0P_SIZE  { readonly section .cy_m0p_image };
-define block RO     {first section .intvec, readonly};
-
-define block cy_xip { section .cy_xip };
-
-/*-Initializations-*/
-initialize by copy { readwrite };
-do not initialize  { section .noinit, section .intvec_ram };
-
-/*-Placement-*/
-
-/* Flash - Cortex-M0+ application image */
-place at start of IROM1_region  { block CM0P_RO };
-
-/* Flash - Cortex-M4 application */
-place at address (__ICFEDIT_region_IROM1_start__ + FLASH_CM0P_SIZE) { block RO };
-
-/* Used for the digital signature of the secure application and the Bootloader SDK application. */
-".cy_app_signature" : place at address (__ICFEDIT_region_IROM1_end__ - 0x200) { section .cy_app_signature };
-
-/* Emulated EEPROM Flash area */
-".cy_em_eeprom" : place at start of IROM2_region  { section .cy_em_eeprom };
-
-/* Supervisory Flash - User Data */
-".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
-
-/* Supervisory Flash - NAR */
-".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
-
-/* Supervisory Flash - Public Key */
-".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
-
-/* Supervisory Flash - TOC2 */
-".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
-
-/* Supervisory Flash - RTOC2 */
-".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
-
-/* eFuse */
-".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
-
-/* Execute in Place (XIP). See the smif driver documentation for details. */
-"cy_xip" : place at start of EROM1_region  { block cy_xip };
-
-/* RAM */
-place at start of IRAM1_region  { readwrite section .intvec_ram};
-place in          IRAM1_region  { readwrite };
-place at end   of IRAM1_region  { block HSTACK };
-
-/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
-".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
-
-
-keep {  section .cy_m0p_image,
-        section .cy_app_signature,
-        section .cy_em_eeprom,
-        section .cy_sflash_user_data,
-        section .cy_sflash_nar,
-        section .cy_sflash_public_key,
-        section .cy_toc_part2,
-        section .cy_rtoc_part2,
-        section .cy_efuse,
-        section .cy_xip,
-        section .cymeta,
-         };
-
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-define exported symbol __cy_memory_0_start    = 0x10000000;
-define exported symbol __cy_memory_0_length   = 0x00100000;
-define exported symbol __cy_memory_0_row_size = 0x200;
-
-/* Emulated EEPROM Flash area */
-define exported symbol __cy_memory_1_start    = 0x14000000;
-define exported symbol __cy_memory_1_length   = 0x8000;
-define exported symbol __cy_memory_1_row_size = 0x200;
-
-/* Supervisory Flash */
-define exported symbol __cy_memory_2_start    = 0x16000000;
-define exported symbol __cy_memory_2_length   = 0x8000;
-define exported symbol __cy_memory_2_row_size = 0x200;
-
-/* XIP */
-define exported symbol __cy_memory_3_start    = 0x18000000;
-define exported symbol __cy_memory_3_length   = 0x08000000;
-define exported symbol __cy_memory_3_row_size = 0x200;
-
-/* eFuse */
-define exported symbol __cy_memory_4_start    = 0x90700000;
-define exported symbol __cy_memory_4_length   = 0x100000;
-define exported symbol __cy_memory_4_row_size = 1;
-
-/* EOF */
+/*******************************************************************************
+* \file cy8c6xx7_cm4_dual.icf
+* \version 2.95.1
+*
+* Linker file for the IAR compiler.
+*
+* The main purpose of the linker script is to describe how the sections in the
+* input files should be mapped into the output file, and to control the memory
+* layout of the output file.
+*
+* \note The entry point is fixed and starts at 0x10000000. The valid application
+* image should be placed there.
+*
+* \note The linker files included with the PDL template projects must be generic
+* and handle all common use cases. Your project may not use every section
+* defined in the linker files. In that case you may see warnings during the
+* build process. In your project, you can simply comment out or remove the
+* relevant code in the linker file.
+*
+********************************************************************************
+* \copyright
+* Copyright 2016-2021 Cypress Semiconductor Corporation
+* SPDX-License-Identifier: Apache-2.0
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*******************************************************************************/
+
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+
+/* The symbols below define the location and size of blocks of memory in the target.
+ * Use these symbols to specify the memory regions available for allocation.
+ */
+
+/* The following symbols control RAM and flash memory allocation for the CM4 core.
+ * You can change the memory allocation by editing RAM and Flash symbols.
+ * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+ * Using this memory region for other purposes will lead to unexpected behavior.
+ * Your changes must be aligned with the corresponding symbols for CM0+ core in 'xx_cm0plus.icf',
+ * where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.icf'.
+ */
+/* RAM */
+define symbol __ICFEDIT_region_IRAM1_start__ = 0x08002000;
+define symbol __ICFEDIT_region_IRAM1_end__   = 0x080477FF;
+
+/* Flash */
+define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
+define symbol __ICFEDIT_region_IROM1_end__   = 0x100FFFFF;
+
+/* The following symbols define a 32K flash region used for EEPROM emulation.
+ * This region can also be used as the general purpose flash.
+ * You can assign sections to this memory region for only one of the cores.
+ * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
+ * Therefore, repurposing this memory region will prevent such middleware from operation.
+ */
+define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
+define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
+
+/* The following symbols define device specific memory regions and must not be changed. */
+/* Supervisory FLASH - User Data */
+define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
+define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
+
+/* Supervisory FLASH - Normal Access Restrictions (NAR) */
+define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
+define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
+
+/* Supervisory FLASH - Public Key */
+define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
+define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
+
+/* Supervisory FLASH - Table of Content # 2 */
+define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
+define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
+
+/* Supervisory FLASH - Table of Content # 2 Copy */
+define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
+define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
+
+/* eFuse */
+define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
+define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
+
+/* XIP */
+define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
+define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
+
+define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
+define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
+
+
+define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
+/*-Sizes-*/
+if (!isdefinedsymbol(__STACK_SIZE)) {
+  define symbol __ICFEDIT_size_cstack__ = 0x1000;
+} else {
+  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
+}
+define symbol __ICFEDIT_size_proc_stack__ = 0x0;
+
+/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
+if (!isdefinedsymbol(__HEAP_SIZE)) {
+    define symbol __ICFEDIT_size_heap__ = 0x0400;
+} else {
+  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
+}
+/**** End of ICF editor section. ###ICF###*/
+
+/* By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
+ * More about CM0+ prebuilt images, see here:
+ * https://github.com/cypresssemiconductorco/psoc6cm0p
+ */
+/* The size of the Cortex-M0+ application image */
+define symbol FLASH_CM0P_SIZE  = 0x2000;
+
+define memory mem with size = 4G;
+define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
+define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
+define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
+define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
+define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
+define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
+define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
+define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
+define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
+define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
+
+define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
+define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
+define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
+define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
+define block CM0P_RO with size = FLASH_CM0P_SIZE  { readonly section .cy_m0p_image };
+define block RO     {first section .intvec, readonly};
+
+define block cy_xip { section .cy_xip };
+
+/*-Initializations-*/
+initialize by copy { readwrite };
+do not initialize  { section .noinit, section .intvec_ram };
+
+/*-Placement-*/
+
+/* Flash - Cortex-M0+ application image */
+place at start of IROM1_region  { block CM0P_RO };
+
+/* Flash - Cortex-M4 application */
+place at address (__ICFEDIT_region_IROM1_start__ + FLASH_CM0P_SIZE) { block RO };
+
+/* Used for the digital signature of the secure application and the Bootloader SDK application. */
+".cy_app_signature" : place at address (__ICFEDIT_region_IROM1_end__ - 0x200) { section .cy_app_signature };
+
+/* Emulated EEPROM Flash area */
+".cy_em_eeprom" : place at start of IROM2_region  { section .cy_em_eeprom };
+
+/* Supervisory Flash - User Data */
+".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
+
+/* Supervisory Flash - NAR */
+".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
+
+/* Supervisory Flash - Public Key */
+".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
+
+/* Supervisory Flash - TOC2 */
+".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
+
+/* Supervisory Flash - RTOC2 */
+".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
+
+/* eFuse */
+".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
+
+/* Execute in Place (XIP). See the smif driver documentation for details. */
+"cy_xip" : place at start of EROM1_region  { block cy_xip };
+
+/* RAM */
+place at start of IRAM1_region  { readwrite section .intvec_ram};
+place in          IRAM1_region  { readwrite };
+place at end   of IRAM1_region  { block HSTACK };
+
+/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
+".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
+
+
+keep {  section .cy_m0p_image,
+        section .cy_app_signature,
+        section .cy_em_eeprom,
+        section .cy_sflash_user_data,
+        section .cy_sflash_nar,
+        section .cy_sflash_public_key,
+        section .cy_toc_part2,
+        section .cy_rtoc_part2,
+        section .cy_efuse,
+        section .cy_xip,
+        section .cymeta,
+         };
+
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+define exported symbol __cy_memory_0_start    = 0x10000000;
+define exported symbol __cy_memory_0_length   = 0x00100000;
+define exported symbol __cy_memory_0_row_size = 0x200;
+
+/* Emulated EEPROM Flash area */
+define exported symbol __cy_memory_1_start    = 0x14000000;
+define exported symbol __cy_memory_1_length   = 0x8000;
+define exported symbol __cy_memory_1_row_size = 0x200;
+
+/* Supervisory Flash */
+define exported symbol __cy_memory_2_start    = 0x16000000;
+define exported symbol __cy_memory_2_length   = 0x8000;
+define exported symbol __cy_memory_2_row_size = 0x200;
+
+/* XIP */
+define exported symbol __cy_memory_3_start    = 0x18000000;
+define exported symbol __cy_memory_3_length   = 0x08000000;
+define exported symbol __cy_memory_3_row_size = 0x200;
+
+/* eFuse */
+define exported symbol __cy_memory_4_start    = 0x90700000;
+define exported symbol __cy_memory_4_length   = 0x100000;
+define exported symbol __cy_memory_4_row_size = 1;
+
+/* EOF */

bsp/Infineon/psoc6-cy8ckit-062-WIFI-BT/board/linker_scripts/link.sct

@@ -1,278 +1,278 @@
-#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m4
-; The first line specifies a preprocessor command that the linker invokes
-; to pass a scatter file through a C preprocessor.
-
-;*******************************************************************************
-;* \file cy8c6xx7_cm4_dual.sct
-;* \version 2.95.1
-;*
-;* Linker file for the ARMCC.
-;*
-;* The main purpose of the linker script is to describe how the sections in the
-;* input files should be mapped into the output file, and to control the memory
-;* layout of the output file.
-;*
-;* \note The entry point location is fixed and starts at 0x10000000. The valid
-;* application image should be placed there.
-;*
-;* \note The linker files included with the PDL template projects must be
-;* generic and handle all common use cases. Your project may not use every
-;* section defined in the linker files. In that case you may see the warnings
-;* during the build process: L6314W (no section matches pattern) and/or L6329W
-;* (pattern only matches removed unused sections). In your project, you can
-;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
-;* the linker, simply comment out or remove the relevant code in the linker
-;* file.
-;*
-;*******************************************************************************
-;* \copyright
-;* Copyright 2016-2021 Cypress Semiconductor Corporation
-;* SPDX-License-Identifier: Apache-2.0
-;*
-;* Licensed under the Apache License, Version 2.0 (the "License");
-;* you may not use this file except in compliance with the License.
-;* You may obtain a copy of the License at
-;*
-;*     http://www.apache.org/licenses/LICENSE-2.0
-;*
-;* Unless required by applicable law or agreed to in writing, software
-;* distributed under the License is distributed on an "AS IS" BASIS,
-;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-;* See the License for the specific language governing permissions and
-;* limitations under the License.
-;******************************************************************************/
-
-; The defines below describe the location and size of blocks of memory in the target.
-; Use these defines to specify the memory regions available for allocation.
-
-; The following defines control RAM and flash memory allocation for the CM4 core.
-; You can change the memory allocation by editing RAM and Flash defines.
-; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
-; Using this memory region for other purposes will lead to unexpected behavior.
-; Your changes must be aligned with the corresponding defines for CM0+ core in 'xx_cm0plus.scat',
-; where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.scat'.
-; RAM
-#define RAM_START               0x08002000
-#define RAM_SIZE                0x00045800
-; Flash
-#define FLASH_START             0x10000000
-#define FLASH_SIZE              0x00100000
-
-; The size of the stack section at the end of CM4 SRAM
-#define STACK_SIZE              0x00001000
-
-; By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
-; More about CM0+ prebuilt images, see here:
-; https://github.com/cypresssemiconductorco/psoc6cm0p
-; The size of the Cortex-M0+ application flash image
-#define FLASH_CM0P_SIZE         0x2000
-
-; The following defines describe a 32K flash region used for EEPROM emulation.
-; This region can also be used as the general purpose flash.
-; You can assign sections to this memory region for only one of the cores.
-; Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
-; Therefore, repurposing this memory region will prevent such middleware from operation.
-#define EM_EEPROM_START         0x14000000
-#define EM_EEPROM_SIZE          0x8000
-
-; The following defines describe device specific memory regions and must not be changed.
-; Supervisory flash: User data
-#define SFLASH_USER_DATA_START  0x16000800
-#define SFLASH_USER_DATA_SIZE   0x00000800
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-#define SFLASH_NAR_START        0x16001A00
-#define SFLASH_NAR_SIZE         0x00000200
-
-; Supervisory flash: Public Key
-#define SFLASH_PUBLIC_KEY_START 0x16005A00
-#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
-
-; Supervisory flash: Table of Content # 2
-#define SFLASH_TOC_2_START      0x16007C00
-#define SFLASH_TOC_2_SIZE       0x00000200
-
-; Supervisory flash: Table of Content # 2 Copy
-#define SFLASH_RTOC_2_START     0x16007E00
-#define SFLASH_RTOC_2_SIZE      0x00000200
-
-; External memory
-#define XIP_START               0x18000000
-#define XIP_SIZE                0x08000000
-
-; eFuse
-#define EFUSE_START             0x90700000
-#define EFUSE_SIZE              0x100000
-
-
-; Cortex-M0+ application flash image area
-LR_IROM FLASH_START FLASH_CM0P_SIZE
-{
-    .cy_m0p_image +0 FLASH_CM0P_SIZE
-    {
-        * (.cy_m0p_image)
-    }
-}
-
-; Cortex-M4 application flash area
-LR_IROM1 (FLASH_START + FLASH_CM0P_SIZE) (FLASH_SIZE - FLASH_CM0P_SIZE)
-{
-    ER_FLASH_VECTORS +0
-    {
-        * (RESET, +FIRST)
-    }
-
-    ER_FLASH_CODE +0 FIXED
-    {
-        * (InRoot$$Sections)
-        * (+RO)
-    }
-
-    ER_RAM_VECTORS RAM_START UNINIT
-    {
-        * (RESET_RAM, +FIRST)
-    }
-
-    RW_RAM_DATA +0
-    {
-        * (.cy_ramfunc)
-        * (+RW, +ZI)
-    }
-
-    ; Place variables in the section that should not be initialized during the
-    ; device startup.
-    RW_IRAM1 +0 UNINIT
-    {
-        * (.noinit)
-        * (.bss.noinit)
-    }
-
-    ; Application heap area (HEAP)
-    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
-    {
-    }
-
-    ; Stack region growing down
-    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
-    {
-    }
-
-    ; Used for the digital signature of the secure application and the
-    ; Bootloader SDK application. The size of the section depends on the required
-    ; data size.
-    .cy_app_signature (FLASH_START + FLASH_SIZE - 256) 256
-    {
-        * (.cy_app_signature)
-    }
-}
-
-
-; Emulated EEPROM Flash area
-LR_EM_EEPROM EM_EEPROM_START EM_EEPROM_SIZE
-{
-    .cy_em_eeprom +0
-    {
-        * (.cy_em_eeprom)
-    }
-}
-
-; Supervisory flash: User data
-LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
-{
-    .cy_sflash_user_data +0
-    {
-        * (.cy_sflash_user_data)
-    }
-}
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
-{
-    .cy_sflash_nar +0
-    {
-        * (.cy_sflash_nar)
-    }
-}
-
-; Supervisory flash: Public Key
-LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
-{
-    .cy_sflash_public_key +0
-    {
-        * (.cy_sflash_public_key)
-    }
-}
-
-; Supervisory flash: Table of Content # 2
-LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
-{
-    .cy_toc_part2 +0
-    {
-        * (.cy_toc_part2)
-    }
-}
-
-; Supervisory flash: Table of Content # 2 Copy
-LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
-{
-    .cy_rtoc_part2 +0
-    {
-        * (.cy_rtoc_part2)
-    }
-}
-
-
-; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
-LR_EROM XIP_START XIP_SIZE
-{
-    cy_xip +0
-    {
-        * (.cy_xip)
-    }
-}
-
-
-; eFuse
-LR_EFUSE EFUSE_START EFUSE_SIZE
-{
-    .cy_efuse +0
-    {
-        * (.cy_efuse)
-    }
-}
-
-
-; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
-CYMETA 0x90500000
-{
-    .cymeta +0 { * (.cymeta) }
-}
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-#define __cy_memory_0_start 0x10000000
-#define __cy_memory_0_length  0x00100000
-#define __cy_memory_0_row_size 0x200
-
-/* Emulated EEPROM Flash area */
-#define __cy_memory_1_start    0x14000000
-#define __cy_memory_1_length   0x8000
-#define __cy_memory_1_row_size 0x200
-
-/* Supervisory Flash */
-#define __cy_memory_2_start    0x16000000
-#define __cy_memory_2_length   0x8000
-#define __cy_memory_2_row_size 0x200
-
-/* XIP */
-#define __cy_memory_3_start    0x18000000
-#define __cy_memory_3_length   0x08000000
-#define __cy_memory_3_row_size 0x200
-
-/* eFuse */
-#define __cy_memory_4_start    0x90700000
-#define __cy_memory_4_length   0x100000
-#define __cy_memory_4_row_size 1
-
-
-/* [] END OF FILE */
+#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m4
+; The first line specifies a preprocessor command that the linker invokes
+; to pass a scatter file through a C preprocessor.
+
+;*******************************************************************************
+;* \file cy8c6xx7_cm4_dual.sct
+;* \version 2.95.1
+;*
+;* Linker file for the ARMCC.
+;*
+;* The main purpose of the linker script is to describe how the sections in the
+;* input files should be mapped into the output file, and to control the memory
+;* layout of the output file.
+;*
+;* \note The entry point location is fixed and starts at 0x10000000. The valid
+;* application image should be placed there.
+;*
+;* \note The linker files included with the PDL template projects must be
+;* generic and handle all common use cases. Your project may not use every
+;* section defined in the linker files. In that case you may see the warnings
+;* during the build process: L6314W (no section matches pattern) and/or L6329W
+;* (pattern only matches removed unused sections). In your project, you can
+;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
+;* the linker, simply comment out or remove the relevant code in the linker
+;* file.
+;*
+;*******************************************************************************
+;* \copyright
+;* Copyright 2016-2021 Cypress Semiconductor Corporation
+;* SPDX-License-Identifier: Apache-2.0
+;*
+;* Licensed under the Apache License, Version 2.0 (the "License");
+;* you may not use this file except in compliance with the License.
+;* You may obtain a copy of the License at
+;*
+;*     http://www.apache.org/licenses/LICENSE-2.0
+;*
+;* Unless required by applicable law or agreed to in writing, software
+;* distributed under the License is distributed on an "AS IS" BASIS,
+;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+;* See the License for the specific language governing permissions and
+;* limitations under the License.
+;******************************************************************************/
+
+; The defines below describe the location and size of blocks of memory in the target.
+; Use these defines to specify the memory regions available for allocation.
+
+; The following defines control RAM and flash memory allocation for the CM4 core.
+; You can change the memory allocation by editing RAM and Flash defines.
+; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+; Using this memory region for other purposes will lead to unexpected behavior.
+; Your changes must be aligned with the corresponding defines for CM0+ core in 'xx_cm0plus.scat',
+; where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.scat'.
+; RAM
+#define RAM_START               0x08002000
+#define RAM_SIZE                0x00045800
+; Flash
+#define FLASH_START             0x10000000
+#define FLASH_SIZE              0x00100000
+
+; The size of the stack section at the end of CM4 SRAM
+#define STACK_SIZE              0x00001000
+
+; By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
+; More about CM0+ prebuilt images, see here:
+; https://github.com/cypresssemiconductorco/psoc6cm0p
+; The size of the Cortex-M0+ application flash image
+#define FLASH_CM0P_SIZE         0x2000
+
+; The following defines describe a 32K flash region used for EEPROM emulation.
+; This region can also be used as the general purpose flash.
+; You can assign sections to this memory region for only one of the cores.
+; Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
+; Therefore, repurposing this memory region will prevent such middleware from operation.
+#define EM_EEPROM_START         0x14000000
+#define EM_EEPROM_SIZE          0x8000
+
+; The following defines describe device specific memory regions and must not be changed.
+; Supervisory flash: User data
+#define SFLASH_USER_DATA_START  0x16000800
+#define SFLASH_USER_DATA_SIZE   0x00000800
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+#define SFLASH_NAR_START        0x16001A00
+#define SFLASH_NAR_SIZE         0x00000200
+
+; Supervisory flash: Public Key
+#define SFLASH_PUBLIC_KEY_START 0x16005A00
+#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
+
+; Supervisory flash: Table of Content # 2
+#define SFLASH_TOC_2_START      0x16007C00
+#define SFLASH_TOC_2_SIZE       0x00000200
+
+; Supervisory flash: Table of Content # 2 Copy
+#define SFLASH_RTOC_2_START     0x16007E00
+#define SFLASH_RTOC_2_SIZE      0x00000200
+
+; External memory
+#define XIP_START               0x18000000
+#define XIP_SIZE                0x08000000
+
+; eFuse
+#define EFUSE_START             0x90700000
+#define EFUSE_SIZE              0x100000
+
+
+; Cortex-M0+ application flash image area
+LR_IROM FLASH_START FLASH_CM0P_SIZE
+{
+    .cy_m0p_image +0 FLASH_CM0P_SIZE
+    {
+        * (.cy_m0p_image)
+    }
+}
+
+; Cortex-M4 application flash area
+LR_IROM1 (FLASH_START + FLASH_CM0P_SIZE) (FLASH_SIZE - FLASH_CM0P_SIZE)
+{
+    ER_FLASH_VECTORS +0
+    {
+        * (RESET, +FIRST)
+    }
+
+    ER_FLASH_CODE +0 FIXED
+    {
+        * (InRoot$$Sections)
+        * (+RO)
+    }
+
+    ER_RAM_VECTORS RAM_START UNINIT
+    {
+        * (RESET_RAM, +FIRST)
+    }
+
+    RW_RAM_DATA +0
+    {
+        * (.cy_ramfunc)
+        * (+RW, +ZI)
+    }
+
+    ; Place variables in the section that should not be initialized during the
+    ; device startup.
+    RW_IRAM1 +0 UNINIT
+    {
+        * (.noinit)
+        * (.bss.noinit)
+    }
+
+    ; Application heap area (HEAP)
+    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
+    {
+    }
+
+    ; Stack region growing down
+    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
+    {
+    }
+
+    ; Used for the digital signature of the secure application and the
+    ; Bootloader SDK application. The size of the section depends on the required
+    ; data size.
+    .cy_app_signature (FLASH_START + FLASH_SIZE - 256) 256
+    {
+        * (.cy_app_signature)
+    }
+}
+
+
+; Emulated EEPROM Flash area
+LR_EM_EEPROM EM_EEPROM_START EM_EEPROM_SIZE
+{
+    .cy_em_eeprom +0
+    {
+        * (.cy_em_eeprom)
+    }
+}
+
+; Supervisory flash: User data
+LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
+{
+    .cy_sflash_user_data +0
+    {
+        * (.cy_sflash_user_data)
+    }
+}
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
+{
+    .cy_sflash_nar +0
+    {
+        * (.cy_sflash_nar)
+    }
+}
+
+; Supervisory flash: Public Key
+LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
+{
+    .cy_sflash_public_key +0
+    {
+        * (.cy_sflash_public_key)
+    }
+}
+
+; Supervisory flash: Table of Content # 2
+LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
+{
+    .cy_toc_part2 +0
+    {
+        * (.cy_toc_part2)
+    }
+}
+
+; Supervisory flash: Table of Content # 2 Copy
+LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
+{
+    .cy_rtoc_part2 +0
+    {
+        * (.cy_rtoc_part2)
+    }
+}
+
+
+; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
+LR_EROM XIP_START XIP_SIZE
+{
+    cy_xip +0
+    {
+        * (.cy_xip)
+    }
+}
+
+
+; eFuse
+LR_EFUSE EFUSE_START EFUSE_SIZE
+{
+    .cy_efuse +0
+    {
+        * (.cy_efuse)
+    }
+}
+
+
+; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
+CYMETA 0x90500000
+{
+    .cymeta +0 { * (.cymeta) }
+}
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+#define __cy_memory_0_start 0x10000000
+#define __cy_memory_0_length  0x00100000
+#define __cy_memory_0_row_size 0x200
+
+/* Emulated EEPROM Flash area */
+#define __cy_memory_1_start    0x14000000
+#define __cy_memory_1_length   0x8000
+#define __cy_memory_1_row_size 0x200
+
+/* Supervisory Flash */
+#define __cy_memory_2_start    0x16000000
+#define __cy_memory_2_length   0x8000
+#define __cy_memory_2_row_size 0x200
+
+/* XIP */
+#define __cy_memory_3_start    0x18000000
+#define __cy_memory_3_length   0x08000000
+#define __cy_memory_3_row_size 0x200
+
+/* eFuse */
+#define __cy_memory_4_start    0x90700000
+#define __cy_memory_4_length   0x100000
+#define __cy_memory_4_row_size 1
+
+
+/* [] END OF FILE */

bsp/Infineon/psoc6-cy8ckit-062-WIFI-BT/libs/TARGET_CY8CKIT-062-WIFI-BT/COMPONENT_CM0P/TOOLCHAIN_ARM/cy8c6xx7_cm0plus.sct

@@ -1,272 +1,272 @@
-#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m0
-; The first line specifies a preprocessor command that the linker invokes
-; to pass a scatter file through a C preprocessor.
-
-;*******************************************************************************
-;* \file cy8c6xx7_cm0plus.sct
-;* \version 2.91
-;*
-;* Linker file for the ARMCC.
-;*
-;* The main purpose of the linker script is to describe how the sections in the
-;* input files should be mapped into the output file, and to control the memory
-;* layout of the output file.
-;*
-;* \note The entry point location is fixed and starts at 0x10000000. The valid
-;* application image should be placed there.
-;*
-;* \note The linker files included with the PDL template projects must be
-;* generic and handle all common use cases. Your project may not use every
-;* section defined in the linker files. In that case you may see the warnings
-;* during the build process: L6314W (no section matches pattern) and/or L6329W
-;* (pattern only matches removed unused sections). In your project, you can
-;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
-;* the linker, simply comment out or remove the relevant code in the linker
-;* file.
-;*
-;*******************************************************************************
-;* \copyright
-;* Copyright 2016-2021 Cypress Semiconductor Corporation
-;* SPDX-License-Identifier: Apache-2.0
-;*
-;* Licensed under the Apache License, Version 2.0 (the "License");
-;* you may not use this file except in compliance with the License.
-;* You may obtain a copy of the License at
-;*
-;*     http://www.apache.org/licenses/LICENSE-2.0
-;*
-;* Unless required by applicable law or agreed to in writing, software
-;* distributed under the License is distributed on an "AS IS" BASIS,
-;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-;* See the License for the specific language governing permissions and
-;* limitations under the License.
-;******************************************************************************/
-
-; The defines below describe the location and size of blocks of memory in the target.
-; Use these defines to specify the memory regions available for allocation.
-
-; The following defines control RAM and flash memory allocation for the CM0+ core.
-; You can change the memory allocation by editing the RAM and Flash defines.
-; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
-; Using this memory region for other purposes will lead to unexpected behavior.
-; Your changes must be aligned with the corresponding defines for the CM4 core in 'xx_cm4_dual.scat',
-; where 'xx' is the device group; for example, 'cy8c6xx7_cm4_dual.scat'.
-; RAM
-#define RAM_START               0x08000000
-#define RAM_SIZE                0x00002000
-; Flash
-#define FLASH_START             0x10000000
-#define FLASH_SIZE              0x00002000
-
-; The size of the stack section at the end of CM0+ SRAM
-#define STACK_SIZE              0x00001000
-
-; The following defines describe a 32K flash region used for EEPROM emulation.
-; This region can also be used as the general purpose flash.
-; You can assign sections to this memory region for only one of the cores.
-; Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
-; Therefore, repurposing this memory region will prevent such middleware from operation.
-#define EM_EEPROM_START         0x14000000
-#define EM_EEPROM_SIZE          0x8000
-
-; The following defines describe device specific memory regions and must not be changed.
-; Supervisory flash: User data
-#define SFLASH_USER_DATA_START  0x16000800
-#define SFLASH_USER_DATA_SIZE   0x00000800
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-#define SFLASH_NAR_START        0x16001A00
-#define SFLASH_NAR_SIZE         0x00000200
-
-; Supervisory flash: Public Key
-#define SFLASH_PUBLIC_KEY_START 0x16005A00
-#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
-
-; Supervisory flash: Table of Content # 2
-#define SFLASH_TOC_2_START      0x16007C00
-#define SFLASH_TOC_2_SIZE       0x00000200
-
-; Supervisory flash: Table of Content # 2 Copy
-#define SFLASH_RTOC_2_START     0x16007E00
-#define SFLASH_RTOC_2_SIZE      0x00000200
-
-; External memory
-#define XIP_START               0x18000000
-#define XIP_SIZE                0x08000000
-
-; eFuse
-#define EFUSE_START             0x90700000
-#define EFUSE_SIZE              0x100000
-
-; Public RAM 
-; This is an unprotected public RAM region, with the placed .cy_sharedmem section.
-; This region is used to place objects that require full access from both cores.
-; Uncomment the following lines, define the region size and uncomment placement of
-; .cy_sharedmem section below.
-; #define PUBLIC_RAM_SIZE         %REGION_SIZE%
-; #define PUBLIC_RAM_START        (RAM_START + RAM_SIZE - STACK_SIZE - PUBLIC_RAM_SIZE)
-
-; Cortex-M0+ application flash area
-LR_IROM1 FLASH_START FLASH_SIZE
-{
-    .cy_app_header +0
-    {
-        * (.cy_app_header)
-    }
-
-    ER_FLASH_VECTORS +0
-    {
-        * (RESET, +FIRST)
-    }
-
-    ER_FLASH_CODE +0 FIXED
-    {
-        * (InRoot$$Sections)
-        * (+RO)
-    }
-
-    ER_RAM_VECTORS RAM_START UNINIT
-    {
-        * (RESET_RAM, +FIRST)
-    }
-
-    RW_RAM_DATA +0
-    {
-        * (.cy_ramfunc)
-        * (+RW, +ZI)
-    }
-
-    ; Place variables in the section that should not be initialized during the
-    ; device startup.
-    RW_IRAM1 +0 UNINIT
-    {
-        * (.noinit)
-    }
-
-    ; To use unprotected public RAM uncomment the following .cy_sharedmem section placement. Recalculate the HEAP start address.
-    ;RW_IRAM2 PUBLIC_RAM_START UNINIT
-    ;{
-    ;    * (.cy_sharedmem)
-    ;}
-
-    ; Application heap area (HEAP)
-    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
-    { 
-    }
-
-    ; Stack region growing down
-    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
-    {
-    }
-}
-
-
-; Emulated EEPROM Flash area
-LR_EM_EEPROM EM_EEPROM_START EM_EEPROM_SIZE
-{
-    .cy_em_eeprom +0
-    {
-        * (.cy_em_eeprom)
-    }
-}
-
-; Supervisory flash: User data
-LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
-{
-    .cy_sflash_user_data +0
-    {
-        * (.cy_sflash_user_data)
-    }
-}
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
-{
-    .cy_sflash_nar +0
-    {
-        * (.cy_sflash_nar)
-    }
-}
-
-; Supervisory flash: Public Key
-LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
-{
-    .cy_sflash_public_key +0
-    {
-        * (.cy_sflash_public_key)
-    }
-}
-
-; Supervisory flash: Table of Content # 2
-LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
-{
-    .cy_toc_part2 +0
-    {
-        * (.cy_toc_part2)
-    }
-}
-
-; Supervisory flash: Table of Content # 2 Copy
-LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
-{
-    .cy_rtoc_part2 +0
-    {
-        * (.cy_rtoc_part2)
-    }
-}
-
-
-; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
-LR_EROM XIP_START XIP_SIZE
-{
-    cy_xip +0
-    {
-        * (.cy_xip)
-    }
-}
-
-
-; eFuse
-LR_EFUSE EFUSE_START EFUSE_SIZE
-{
-    .cy_efuse +0
-    {
-        * (.cy_efuse)
-    }
-}
-
-
-; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
-CYMETA 0x90500000
-{
-    .cymeta +0 { * (.cymeta) }
-}
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-#define __cy_memory_0_start 0x10000000
-#define __cy_memory_0_length  0x00100000
-#define __cy_memory_0_row_size 0x200
-
-/* Emulated EEPROM Flash area */
-#define __cy_memory_1_start    0x14000000
-#define __cy_memory_1_length   0x8000
-#define __cy_memory_1_row_size 0x200
-
-/* Supervisory Flash */
-#define __cy_memory_2_start    0x16000000
-#define __cy_memory_2_length   0x8000
-#define __cy_memory_2_row_size 0x200
-
-/* XIP */
-#define __cy_memory_3_start    0x18000000
-#define __cy_memory_3_length   0x08000000
-#define __cy_memory_3_row_size 0x200
-
-/* eFuse */
-#define __cy_memory_4_start    0x90700000
-#define __cy_memory_4_length   0x100000
-#define __cy_memory_4_row_size 1
-
-
-/* [] END OF FILE */
+#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m0
+; The first line specifies a preprocessor command that the linker invokes
+; to pass a scatter file through a C preprocessor.
+
+;*******************************************************************************
+;* \file cy8c6xx7_cm0plus.sct
+;* \version 2.91
+;*
+;* Linker file for the ARMCC.
+;*
+;* The main purpose of the linker script is to describe how the sections in the
+;* input files should be mapped into the output file, and to control the memory
+;* layout of the output file.
+;*
+;* \note The entry point location is fixed and starts at 0x10000000. The valid
+;* application image should be placed there.
+;*
+;* \note The linker files included with the PDL template projects must be
+;* generic and handle all common use cases. Your project may not use every
+;* section defined in the linker files. In that case you may see the warnings
+;* during the build process: L6314W (no section matches pattern) and/or L6329W
+;* (pattern only matches removed unused sections). In your project, you can
+;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
+;* the linker, simply comment out or remove the relevant code in the linker
+;* file.
+;*
+;*******************************************************************************
+;* \copyright
+;* Copyright 2016-2021 Cypress Semiconductor Corporation
+;* SPDX-License-Identifier: Apache-2.0
+;*
+;* Licensed under the Apache License, Version 2.0 (the "License");
+;* you may not use this file except in compliance with the License.
+;* You may obtain a copy of the License at
+;*
+;*     http://www.apache.org/licenses/LICENSE-2.0
+;*
+;* Unless required by applicable law or agreed to in writing, software
+;* distributed under the License is distributed on an "AS IS" BASIS,
+;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+;* See the License for the specific language governing permissions and
+;* limitations under the License.
+;******************************************************************************/
+
+; The defines below describe the location and size of blocks of memory in the target.
+; Use these defines to specify the memory regions available for allocation.
+
+; The following defines control RAM and flash memory allocation for the CM0+ core.
+; You can change the memory allocation by editing the RAM and Flash defines.
+; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+; Using this memory region for other purposes will lead to unexpected behavior.
+; Your changes must be aligned with the corresponding defines for the CM4 core in 'xx_cm4_dual.scat',
+; where 'xx' is the device group; for example, 'cy8c6xx7_cm4_dual.scat'.
+; RAM
+#define RAM_START               0x08000000
+#define RAM_SIZE                0x00002000
+; Flash
+#define FLASH_START             0x10000000
+#define FLASH_SIZE              0x00002000
+
+; The size of the stack section at the end of CM0+ SRAM
+#define STACK_SIZE              0x00001000
+
+; The following defines describe a 32K flash region used for EEPROM emulation.
+; This region can also be used as the general purpose flash.
+; You can assign sections to this memory region for only one of the cores.
+; Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
+; Therefore, repurposing this memory region will prevent such middleware from operation.
+#define EM_EEPROM_START         0x14000000
+#define EM_EEPROM_SIZE          0x8000
+
+; The following defines describe device specific memory regions and must not be changed.
+; Supervisory flash: User data
+#define SFLASH_USER_DATA_START  0x16000800
+#define SFLASH_USER_DATA_SIZE   0x00000800
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+#define SFLASH_NAR_START        0x16001A00
+#define SFLASH_NAR_SIZE         0x00000200
+
+; Supervisory flash: Public Key
+#define SFLASH_PUBLIC_KEY_START 0x16005A00
+#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
+
+; Supervisory flash: Table of Content # 2
+#define SFLASH_TOC_2_START      0x16007C00
+#define SFLASH_TOC_2_SIZE       0x00000200
+
+; Supervisory flash: Table of Content # 2 Copy
+#define SFLASH_RTOC_2_START     0x16007E00
+#define SFLASH_RTOC_2_SIZE      0x00000200
+
+; External memory
+#define XIP_START               0x18000000
+#define XIP_SIZE                0x08000000
+
+; eFuse
+#define EFUSE_START             0x90700000
+#define EFUSE_SIZE              0x100000
+
+; Public RAM
+; This is an unprotected public RAM region, with the placed .cy_sharedmem section.
+; This region is used to place objects that require full access from both cores.
+; Uncomment the following lines, define the region size and uncomment placement of
+; .cy_sharedmem section below.
+; #define PUBLIC_RAM_SIZE         %REGION_SIZE%
+; #define PUBLIC_RAM_START        (RAM_START + RAM_SIZE - STACK_SIZE - PUBLIC_RAM_SIZE)
+
+; Cortex-M0+ application flash area
+LR_IROM1 FLASH_START FLASH_SIZE
+{
+    .cy_app_header +0
+    {
+        * (.cy_app_header)
+    }
+
+    ER_FLASH_VECTORS +0
+    {
+        * (RESET, +FIRST)
+    }
+
+    ER_FLASH_CODE +0 FIXED
+    {
+        * (InRoot$$Sections)
+        * (+RO)
+    }
+
+    ER_RAM_VECTORS RAM_START UNINIT
+    {
+        * (RESET_RAM, +FIRST)
+    }
+
+    RW_RAM_DATA +0
+    {
+        * (.cy_ramfunc)
+        * (+RW, +ZI)
+    }
+
+    ; Place variables in the section that should not be initialized during the
+    ; device startup.
+    RW_IRAM1 +0 UNINIT
+    {
+        * (.noinit)
+    }
+
+    ; To use unprotected public RAM uncomment the following .cy_sharedmem section placement. Recalculate the HEAP start address.
+    ;RW_IRAM2 PUBLIC_RAM_START UNINIT
+    ;{
+    ;    * (.cy_sharedmem)
+    ;}
+
+    ; Application heap area (HEAP)
+    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
+    {
+    }
+
+    ; Stack region growing down
+    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
+    {
+    }
+}
+
+
+; Emulated EEPROM Flash area
+LR_EM_EEPROM EM_EEPROM_START EM_EEPROM_SIZE
+{
+    .cy_em_eeprom +0
+    {
+        * (.cy_em_eeprom)
+    }
+}
+
+; Supervisory flash: User data
+LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
+{
+    .cy_sflash_user_data +0
+    {
+        * (.cy_sflash_user_data)
+    }
+}
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
+{
+    .cy_sflash_nar +0
+    {
+        * (.cy_sflash_nar)
+    }
+}
+
+; Supervisory flash: Public Key
+LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
+{
+    .cy_sflash_public_key +0
+    {
+        * (.cy_sflash_public_key)
+    }
+}
+
+; Supervisory flash: Table of Content # 2
+LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
+{
+    .cy_toc_part2 +0
+    {
+        * (.cy_toc_part2)
+    }
+}
+
+; Supervisory flash: Table of Content # 2 Copy
+LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
+{
+    .cy_rtoc_part2 +0
+    {
+        * (.cy_rtoc_part2)
+    }
+}
+
+
+; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
+LR_EROM XIP_START XIP_SIZE
+{
+    cy_xip +0
+    {
+        * (.cy_xip)
+    }
+}
+
+
+; eFuse
+LR_EFUSE EFUSE_START EFUSE_SIZE
+{
+    .cy_efuse +0
+    {
+        * (.cy_efuse)
+    }
+}
+
+
+; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
+CYMETA 0x90500000
+{
+    .cymeta +0 { * (.cymeta) }
+}
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+#define __cy_memory_0_start 0x10000000
+#define __cy_memory_0_length  0x00100000
+#define __cy_memory_0_row_size 0x200
+
+/* Emulated EEPROM Flash area */
+#define __cy_memory_1_start    0x14000000
+#define __cy_memory_1_length   0x8000
+#define __cy_memory_1_row_size 0x200
+
+/* Supervisory Flash */
+#define __cy_memory_2_start    0x16000000
+#define __cy_memory_2_length   0x8000
+#define __cy_memory_2_row_size 0x200
+
+/* XIP */
+#define __cy_memory_3_start    0x18000000
+#define __cy_memory_3_length   0x08000000
+#define __cy_memory_3_row_size 0x200
+
+/* eFuse */
+#define __cy_memory_4_start    0x90700000
+#define __cy_memory_4_length   0x100000
+#define __cy_memory_4_row_size 1
+
+
+/* [] END OF FILE */

bsp/Infineon/psoc6-cy8ckit-062-WIFI-BT/libs/TARGET_CY8CKIT-062-WIFI-BT/COMPONENT_CM0P/TOOLCHAIN_IAR/cy8c6xx7_cm0plus.icf

@@ -1,253 +1,253 @@
-/*******************************************************************************
-* \file cy8c6xx7_cm0plus.icf
-* \version 2.91
-*
-* Linker file for the IAR compiler.
-*
-* The main purpose of the linker script is to describe how the sections in the
-* input files should be mapped into the output file, and to control the memory
-* layout of the output file.
-*
-* \note The entry point is fixed and starts at 0x10000000. The valid application
-* image should be placed there.
-*
-* \note The linker files included with the PDL template projects must be generic
-* and handle all common use cases. Your project may not use every section
-* defined in the linker files. In that case you may see warnings during the
-* build process. In your project, you can simply comment out or remove the
-* relevant code in the linker file.
-*
-********************************************************************************
-* \copyright
-* Copyright 2016-2021 Cypress Semiconductor Corporation
-* SPDX-License-Identifier: Apache-2.0
-*
-* Licensed under the Apache License, Version 2.0 (the "License");
-* you may not use this file except in compliance with the License.
-* You may obtain a copy of the License at
-*
-*     http://www.apache.org/licenses/LICENSE-2.0
-*
-* Unless required by applicable law or agreed to in writing, software
-* distributed under the License is distributed on an "AS IS" BASIS,
-* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-* See the License for the specific language governing permissions and
-* limitations under the License.
-*******************************************************************************/
-
-/*###ICF### Section handled by ICF editor, don't touch! ****/
-/*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
-/*-Specials-*/
-define symbol __ICFEDIT_intvec_start__ = 0x00000000;
-
-/*-Sizes-*/
-if (!isdefinedsymbol(__STACK_SIZE)) {
-  define symbol __ICFEDIT_size_cstack__ = 0x1000;
-} else {
-  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
-}
-define symbol __ICFEDIT_size_proc_stack__ = 0x0;
-
-/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
-if (!isdefinedsymbol(__HEAP_SIZE)) {
-    define symbol __ICFEDIT_size_heap__ = 0x0400;
-} else {
-  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
-}
-
-/* The symbols below define the location and size of blocks of memory in the target.
- * Use these symbols to specify the memory regions available for allocation.
- */
-
-/* The following symbols control RAM and flash memory allocation for the CM0+ core.
- * You can change the memory allocation by editing RAM and Flash symbols.
- * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
- * Using this memory region for other purposes will lead to unexpected behavior.
- * Your changes must be aligned with the corresponding symbols for CM4 core in 'xx_cm4_dual.icf',
- * where 'xx' is the device group; for example, 'cy8c6xx7_cm4_dual.icf'.
- */
-/* RAM */
-define symbol __ICFEDIT_region_IRAM1_start__ = 0x08000000;
-define symbol __ICFEDIT_region_IRAM1_end__   = 0x08001FFF;
-
-/* Flash */
-define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
-define symbol __ICFEDIT_region_IROM1_end__   = 0x10001FFF;
-
-/* The following symbols define a 32K flash region used for EEPROM emulation.
- * This region can also be used as the general purpose flash.
- * You can assign sections to this memory region for only one of the cores.
- * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
- * Therefore, repurposing this memory region will prevent such middleware from operation.
- */
-define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
-define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
-
-/* The following symbols define device specific memory regions and must not be changed. */
-/* Supervisory FLASH - User Data */
-define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
-define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
-
-/* Supervisory FLASH - Normal Access Restrictions (NAR) */
-define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
-define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
-
-/* Supervisory FLASH - Public Key */
-define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
-define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
-
-/* Supervisory FLASH - Table of Content # 2 */
-define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
-define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
-
-/* Supervisory FLASH - Table of Content # 2 Copy */
-define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
-define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
-
-/* eFuse */
-define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
-define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
-
-/* XIP */
-define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
-define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
-
-define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
-define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
-
-
-define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
-/**** End of ICF editor section. ###ICF###*/
-
-
-define memory mem with size = 4G;
-define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
-define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
-define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
-define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
-define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
-define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
-define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
-define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
-define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
-define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
-
-/* Public RAM 
- * This is an unprotected public RAM region, with the placed .cy_sharedmem section.
- * This region is used to place objects that require full access from both cores.
- * Uncomment the following lines, define region size, and uncomment the placement of
- * .cy_sharedmem section below in the IRAM2_region. Also define the __ICFEDIT_region_IRAM2_start__
- *  and __ICFEDIT_region_IRAM2_end__ to place the IRAM2_region.
- */
-/*
-define region IRAM2_region = mem:[from __ICFEDIT_region_IRAM2_start__ to __ICFEDIT_region_IRAM2_end__];
-*/
-
-define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
-define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
-define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
-define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
-define block RO     {first section .intvec, readonly};
-
-define block cy_xip { section .cy_xip };
-
-/*-Initializations-*/
-initialize by copy { readwrite };
-do not initialize  { section .noinit, section .intvec_ram };
-
-/*-Placement-*/
-
-/* Flash - Cortex-M0+ application */
-".cy_app_header" : place at start of IROM1_region  { section .cy_app_header };
-place in          IROM1_region  { block RO };
-
-/* Emulated EEPROM Flash area */
-".cy_em_eeprom" : place at start of IROM2_region  { section .cy_em_eeprom };
-
-/* Supervisory Flash - User Data */
-".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
-
-/* Supervisory Flash - NAR */
-".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
-
-/* Supervisory Flash - Public Key */
-".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
-
-/* Supervisory Flash - TOC2 */
-".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
-
-/* Supervisory Flash - RTOC2 */
-".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
-
-/* eFuse */
-".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
-
-/* Execute in Place (XIP). See the smif driver documentation for details. */
-"cy_xip" : place at start of EROM1_region  { block cy_xip };
-
-/* RAM */
-place at start of IRAM1_region  { readwrite section .intvec_ram};
-place in          IRAM1_region  { readwrite };
-place at end   of IRAM1_region  { block HSTACK };
-
-/* Public RAM 
- *To use unprotected public RAM, uncomment the following .cy_sharedmem section placement.
- */
-/*
-place at start of IRAM2_region  { section .cy_sharedmem };
-*/
-
-/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
-".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
-
-
-keep {  section .cy_app_header,
-        section .cy_em_eeprom,
-        section .cy_sflash_user_data,
-        section .cy_sflash_nar,
-        section .cy_sflash_public_key,
-        section .cy_toc_part2,
-        section .cy_rtoc_part2,
-        section .cy_efuse,
-        section .cy_xip,
-        section .cymeta,
-         };
-
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-define exported symbol __cy_memory_0_start    = 0x10000000;
-define exported symbol __cy_memory_0_length   = 0x00100000;
-define exported symbol __cy_memory_0_row_size = 0x200;
-
-/* Emulated EEPROM Flash area */
-define exported symbol __cy_memory_1_start    = 0x14000000;
-define exported symbol __cy_memory_1_length   = 0x8000;
-define exported symbol __cy_memory_1_row_size = 0x200;
-
-/* Supervisory Flash */
-define exported symbol __cy_memory_2_start    = 0x16000000;
-define exported symbol __cy_memory_2_length   = 0x8000;
-define exported symbol __cy_memory_2_row_size = 0x200;
-
-/* XIP */
-define exported symbol __cy_memory_3_start    = 0x18000000;
-define exported symbol __cy_memory_3_length   = 0x08000000;
-define exported symbol __cy_memory_3_row_size = 0x200;
-
-/* eFuse */
-define exported symbol __cy_memory_4_start    = 0x90700000;
-define exported symbol __cy_memory_4_length   = 0x100000;
-define exported symbol __cy_memory_4_row_size = 1;
-
-/* EOF */
+/*******************************************************************************
+* \file cy8c6xx7_cm0plus.icf
+* \version 2.91
+*
+* Linker file for the IAR compiler.
+*
+* The main purpose of the linker script is to describe how the sections in the
+* input files should be mapped into the output file, and to control the memory
+* layout of the output file.
+*
+* \note The entry point is fixed and starts at 0x10000000. The valid application
+* image should be placed there.
+*
+* \note The linker files included with the PDL template projects must be generic
+* and handle all common use cases. Your project may not use every section
+* defined in the linker files. In that case you may see warnings during the
+* build process. In your project, you can simply comment out or remove the
+* relevant code in the linker file.
+*
+********************************************************************************
+* \copyright
+* Copyright 2016-2021 Cypress Semiconductor Corporation
+* SPDX-License-Identifier: Apache-2.0
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*******************************************************************************/
+
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+
+/*-Sizes-*/
+if (!isdefinedsymbol(__STACK_SIZE)) {
+  define symbol __ICFEDIT_size_cstack__ = 0x1000;
+} else {
+  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
+}
+define symbol __ICFEDIT_size_proc_stack__ = 0x0;
+
+/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
+if (!isdefinedsymbol(__HEAP_SIZE)) {
+    define symbol __ICFEDIT_size_heap__ = 0x0400;
+} else {
+  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
+}
+
+/* The symbols below define the location and size of blocks of memory in the target.
+ * Use these symbols to specify the memory regions available for allocation.
+ */
+
+/* The following symbols control RAM and flash memory allocation for the CM0+ core.
+ * You can change the memory allocation by editing RAM and Flash symbols.
+ * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+ * Using this memory region for other purposes will lead to unexpected behavior.
+ * Your changes must be aligned with the corresponding symbols for CM4 core in 'xx_cm4_dual.icf',
+ * where 'xx' is the device group; for example, 'cy8c6xx7_cm4_dual.icf'.
+ */
+/* RAM */
+define symbol __ICFEDIT_region_IRAM1_start__ = 0x08000000;
+define symbol __ICFEDIT_region_IRAM1_end__   = 0x08001FFF;
+
+/* Flash */
+define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
+define symbol __ICFEDIT_region_IROM1_end__   = 0x10001FFF;
+
+/* The following symbols define a 32K flash region used for EEPROM emulation.
+ * This region can also be used as the general purpose flash.
+ * You can assign sections to this memory region for only one of the cores.
+ * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
+ * Therefore, repurposing this memory region will prevent such middleware from operation.
+ */
+define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
+define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
+
+/* The following symbols define device specific memory regions and must not be changed. */
+/* Supervisory FLASH - User Data */
+define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
+define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
+
+/* Supervisory FLASH - Normal Access Restrictions (NAR) */
+define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
+define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
+
+/* Supervisory FLASH - Public Key */
+define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
+define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
+
+/* Supervisory FLASH - Table of Content # 2 */
+define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
+define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
+
+/* Supervisory FLASH - Table of Content # 2 Copy */
+define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
+define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
+
+/* eFuse */
+define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
+define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
+
+/* XIP */
+define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
+define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
+
+define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
+define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
+
+
+define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
+define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
+define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
+define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
+define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
+define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
+define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
+define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
+define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
+define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
+
+/* Public RAM
+ * This is an unprotected public RAM region, with the placed .cy_sharedmem section.
+ * This region is used to place objects that require full access from both cores.
+ * Uncomment the following lines, define region size, and uncomment the placement of
+ * .cy_sharedmem section below in the IRAM2_region. Also define the __ICFEDIT_region_IRAM2_start__
+ *  and __ICFEDIT_region_IRAM2_end__ to place the IRAM2_region.
+ */
+/*
+define region IRAM2_region = mem:[from __ICFEDIT_region_IRAM2_start__ to __ICFEDIT_region_IRAM2_end__];
+*/
+
+define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
+define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
+define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
+define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
+define block RO     {first section .intvec, readonly};
+
+define block cy_xip { section .cy_xip };
+
+/*-Initializations-*/
+initialize by copy { readwrite };
+do not initialize  { section .noinit, section .intvec_ram };
+
+/*-Placement-*/
+
+/* Flash - Cortex-M0+ application */
+".cy_app_header" : place at start of IROM1_region  { section .cy_app_header };
+place in          IROM1_region  { block RO };
+
+/* Emulated EEPROM Flash area */
+".cy_em_eeprom" : place at start of IROM2_region  { section .cy_em_eeprom };
+
+/* Supervisory Flash - User Data */
+".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
+
+/* Supervisory Flash - NAR */
+".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
+
+/* Supervisory Flash - Public Key */
+".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
+
+/* Supervisory Flash - TOC2 */
+".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
+
+/* Supervisory Flash - RTOC2 */
+".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
+
+/* eFuse */
+".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
+
+/* Execute in Place (XIP). See the smif driver documentation for details. */
+"cy_xip" : place at start of EROM1_region  { block cy_xip };
+
+/* RAM */
+place at start of IRAM1_region  { readwrite section .intvec_ram};
+place in          IRAM1_region  { readwrite };
+place at end   of IRAM1_region  { block HSTACK };
+
+/* Public RAM
+ *To use unprotected public RAM, uncomment the following .cy_sharedmem section placement.
+ */
+/*
+place at start of IRAM2_region  { section .cy_sharedmem };
+*/
+
+/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
+".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
+
+
+keep {  section .cy_app_header,
+        section .cy_em_eeprom,
+        section .cy_sflash_user_data,
+        section .cy_sflash_nar,
+        section .cy_sflash_public_key,
+        section .cy_toc_part2,
+        section .cy_rtoc_part2,
+        section .cy_efuse,
+        section .cy_xip,
+        section .cymeta,
+         };
+
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+define exported symbol __cy_memory_0_start    = 0x10000000;
+define exported symbol __cy_memory_0_length   = 0x00100000;
+define exported symbol __cy_memory_0_row_size = 0x200;
+
+/* Emulated EEPROM Flash area */
+define exported symbol __cy_memory_1_start    = 0x14000000;
+define exported symbol __cy_memory_1_length   = 0x8000;
+define exported symbol __cy_memory_1_row_size = 0x200;
+
+/* Supervisory Flash */
+define exported symbol __cy_memory_2_start    = 0x16000000;
+define exported symbol __cy_memory_2_length   = 0x8000;
+define exported symbol __cy_memory_2_row_size = 0x200;
+
+/* XIP */
+define exported symbol __cy_memory_3_start    = 0x18000000;
+define exported symbol __cy_memory_3_length   = 0x08000000;
+define exported symbol __cy_memory_3_row_size = 0x200;
+
+/* eFuse */
+define exported symbol __cy_memory_4_start    = 0x90700000;
+define exported symbol __cy_memory_4_length   = 0x100000;
+define exported symbol __cy_memory_4_row_size = 1;
+
+/* EOF */

bsp/Infineon/psoc6-cy8ckit-062-WIFI-BT/libs/TARGET_CY8CKIT-062-WIFI-BT/COMPONENT_CM4/TOOLCHAIN_ARM/cy8c6xx7_cm4_dual.sct

@@ -1,277 +1,277 @@
-#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m4
-; The first line specifies a preprocessor command that the linker invokes
-; to pass a scatter file through a C preprocessor.
-
-;*******************************************************************************
-;* \file cy8c6xx7_cm4_dual.sct
-;* \version 2.91
-;*
-;* Linker file for the ARMCC.
-;*
-;* The main purpose of the linker script is to describe how the sections in the
-;* input files should be mapped into the output file, and to control the memory
-;* layout of the output file.
-;*
-;* \note The entry point location is fixed and starts at 0x10000000. The valid
-;* application image should be placed there.
-;*
-;* \note The linker files included with the PDL template projects must be
-;* generic and handle all common use cases. Your project may not use every
-;* section defined in the linker files. In that case you may see the warnings
-;* during the build process: L6314W (no section matches pattern) and/or L6329W
-;* (pattern only matches removed unused sections). In your project, you can
-;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
-;* the linker, simply comment out or remove the relevant code in the linker
-;* file.
-;*
-;*******************************************************************************
-;* \copyright
-;* Copyright 2016-2021 Cypress Semiconductor Corporation
-;* SPDX-License-Identifier: Apache-2.0
-;*
-;* Licensed under the Apache License, Version 2.0 (the "License");
-;* you may not use this file except in compliance with the License.
-;* You may obtain a copy of the License at
-;*
-;*     http://www.apache.org/licenses/LICENSE-2.0
-;*
-;* Unless required by applicable law or agreed to in writing, software
-;* distributed under the License is distributed on an "AS IS" BASIS,
-;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-;* See the License for the specific language governing permissions and
-;* limitations under the License.
-;******************************************************************************/
-
-; The defines below describe the location and size of blocks of memory in the target.
-; Use these defines to specify the memory regions available for allocation.
-
-; The following defines control RAM and flash memory allocation for the CM4 core.
-; You can change the memory allocation by editing RAM and Flash defines.
-; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
-; Using this memory region for other purposes will lead to unexpected behavior.
-; Your changes must be aligned with the corresponding defines for CM0+ core in 'xx_cm0plus.scat',
-; where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.scat'.
-; RAM
-#define RAM_START               0x08002000
-#define RAM_SIZE                0x00045800
-; Flash
-#define FLASH_START             0x10000000
-#define FLASH_SIZE              0x00100000
-
-; The size of the stack section at the end of CM4 SRAM
-#define STACK_SIZE              0x00001000
-
-; By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
-; More about CM0+ prebuilt images, see here:
-; https://github.com/cypresssemiconductorco/psoc6cm0p
-; The size of the Cortex-M0+ application flash image
-#define FLASH_CM0P_SIZE         0x2000
-
-; The following defines describe a 32K flash region used for EEPROM emulation.
-; This region can also be used as the general purpose flash.
-; You can assign sections to this memory region for only one of the cores.
-; Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
-; Therefore, repurposing this memory region will prevent such middleware from operation.
-#define EM_EEPROM_START         0x14000000
-#define EM_EEPROM_SIZE          0x8000
-
-; The following defines describe device specific memory regions and must not be changed.
-; Supervisory flash: User data
-#define SFLASH_USER_DATA_START  0x16000800
-#define SFLASH_USER_DATA_SIZE   0x00000800
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-#define SFLASH_NAR_START        0x16001A00
-#define SFLASH_NAR_SIZE         0x00000200
-
-; Supervisory flash: Public Key
-#define SFLASH_PUBLIC_KEY_START 0x16005A00
-#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
-
-; Supervisory flash: Table of Content # 2
-#define SFLASH_TOC_2_START      0x16007C00
-#define SFLASH_TOC_2_SIZE       0x00000200
-
-; Supervisory flash: Table of Content # 2 Copy
-#define SFLASH_RTOC_2_START     0x16007E00
-#define SFLASH_RTOC_2_SIZE      0x00000200
-
-; External memory
-#define XIP_START               0x18000000
-#define XIP_SIZE                0x08000000
-
-; eFuse
-#define EFUSE_START             0x90700000
-#define EFUSE_SIZE              0x100000
-
-
-; Cortex-M0+ application flash image area
-LR_IROM FLASH_START FLASH_CM0P_SIZE
-{
-    .cy_m0p_image +0 FLASH_CM0P_SIZE
-    {
-        * (.cy_m0p_image)
-    }
-}
-
-; Cortex-M4 application flash area
-LR_IROM1 (FLASH_START + FLASH_CM0P_SIZE) (FLASH_SIZE - FLASH_CM0P_SIZE)
-{
-    ER_FLASH_VECTORS +0
-    {
-        * (RESET, +FIRST)
-    }
-
-    ER_FLASH_CODE +0 FIXED
-    {
-        * (InRoot$$Sections)
-        * (+RO)
-    }
-
-    ER_RAM_VECTORS RAM_START UNINIT
-    {
-        * (RESET_RAM, +FIRST)
-    }
-
-    RW_RAM_DATA +0
-    {
-        * (.cy_ramfunc)
-        * (+RW, +ZI)
-    }
-
-    ; Place variables in the section that should not be initialized during the
-    ; device startup.
-    RW_IRAM1 +0 UNINIT
-    {
-        * (.noinit)
-    }
-
-    ; Application heap area (HEAP)
-    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
-    { 
-    }
-
-    ; Stack region growing down
-    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
-    {
-    }
-
-    ; Used for the digital signature of the secure application and the
-    ; Bootloader SDK application. The size of the section depends on the required
-    ; data size.
-    .cy_app_signature (FLASH_START + FLASH_SIZE - 256) 256
-    {
-        * (.cy_app_signature)
-    }
-}
-
-
-; Emulated EEPROM Flash area
-LR_EM_EEPROM EM_EEPROM_START EM_EEPROM_SIZE
-{
-    .cy_em_eeprom +0
-    {
-        * (.cy_em_eeprom)
-    }
-}
-
-; Supervisory flash: User data
-LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
-{
-    .cy_sflash_user_data +0
-    {
-        * (.cy_sflash_user_data)
-    }
-}
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
-{
-    .cy_sflash_nar +0
-    {
-        * (.cy_sflash_nar)
-    }
-}
-
-; Supervisory flash: Public Key
-LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
-{
-    .cy_sflash_public_key +0
-    {
-        * (.cy_sflash_public_key)
-    }
-}
-
-; Supervisory flash: Table of Content # 2
-LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
-{
-    .cy_toc_part2 +0
-    {
-        * (.cy_toc_part2)
-    }
-}
-
-; Supervisory flash: Table of Content # 2 Copy
-LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
-{
-    .cy_rtoc_part2 +0
-    {
-        * (.cy_rtoc_part2)
-    }
-}
-
-
-; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
-LR_EROM XIP_START XIP_SIZE
-{
-    cy_xip +0
-    {
-        * (.cy_xip)
-    }
-}
-
-
-; eFuse
-LR_EFUSE EFUSE_START EFUSE_SIZE
-{
-    .cy_efuse +0
-    {
-        * (.cy_efuse)
-    }
-}
-
-
-; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
-CYMETA 0x90500000
-{
-    .cymeta +0 { * (.cymeta) }
-}
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-#define __cy_memory_0_start 0x10000000
-#define __cy_memory_0_length  0x00100000
-#define __cy_memory_0_row_size 0x200
-
-/* Emulated EEPROM Flash area */
-#define __cy_memory_1_start    0x14000000
-#define __cy_memory_1_length   0x8000
-#define __cy_memory_1_row_size 0x200
-
-/* Supervisory Flash */
-#define __cy_memory_2_start    0x16000000
-#define __cy_memory_2_length   0x8000
-#define __cy_memory_2_row_size 0x200
-
-/* XIP */
-#define __cy_memory_3_start    0x18000000
-#define __cy_memory_3_length   0x08000000
-#define __cy_memory_3_row_size 0x200
-
-/* eFuse */
-#define __cy_memory_4_start    0x90700000
-#define __cy_memory_4_length   0x100000
-#define __cy_memory_4_row_size 1
-
-
-/* [] END OF FILE */
+#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m4
+; The first line specifies a preprocessor command that the linker invokes
+; to pass a scatter file through a C preprocessor.
+
+;*******************************************************************************
+;* \file cy8c6xx7_cm4_dual.sct
+;* \version 2.91
+;*
+;* Linker file for the ARMCC.
+;*
+;* The main purpose of the linker script is to describe how the sections in the
+;* input files should be mapped into the output file, and to control the memory
+;* layout of the output file.
+;*
+;* \note The entry point location is fixed and starts at 0x10000000. The valid
+;* application image should be placed there.
+;*
+;* \note The linker files included with the PDL template projects must be
+;* generic and handle all common use cases. Your project may not use every
+;* section defined in the linker files. In that case you may see the warnings
+;* during the build process: L6314W (no section matches pattern) and/or L6329W
+;* (pattern only matches removed unused sections). In your project, you can
+;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
+;* the linker, simply comment out or remove the relevant code in the linker
+;* file.
+;*
+;*******************************************************************************
+;* \copyright
+;* Copyright 2016-2021 Cypress Semiconductor Corporation
+;* SPDX-License-Identifier: Apache-2.0
+;*
+;* Licensed under the Apache License, Version 2.0 (the "License");
+;* you may not use this file except in compliance with the License.
+;* You may obtain a copy of the License at
+;*
+;*     http://www.apache.org/licenses/LICENSE-2.0
+;*
+;* Unless required by applicable law or agreed to in writing, software
+;* distributed under the License is distributed on an "AS IS" BASIS,
+;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+;* See the License for the specific language governing permissions and
+;* limitations under the License.
+;******************************************************************************/
+
+; The defines below describe the location and size of blocks of memory in the target.
+; Use these defines to specify the memory regions available for allocation.
+
+; The following defines control RAM and flash memory allocation for the CM4 core.
+; You can change the memory allocation by editing RAM and Flash defines.
+; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+; Using this memory region for other purposes will lead to unexpected behavior.
+; Your changes must be aligned with the corresponding defines for CM0+ core in 'xx_cm0plus.scat',
+; where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.scat'.
+; RAM
+#define RAM_START               0x08002000
+#define RAM_SIZE                0x00045800
+; Flash
+#define FLASH_START             0x10000000
+#define FLASH_SIZE              0x00100000
+
+; The size of the stack section at the end of CM4 SRAM
+#define STACK_SIZE              0x00001000
+
+; By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
+; More about CM0+ prebuilt images, see here:
+; https://github.com/cypresssemiconductorco/psoc6cm0p
+; The size of the Cortex-M0+ application flash image
+#define FLASH_CM0P_SIZE         0x2000
+
+; The following defines describe a 32K flash region used for EEPROM emulation.
+; This region can also be used as the general purpose flash.
+; You can assign sections to this memory region for only one of the cores.
+; Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
+; Therefore, repurposing this memory region will prevent such middleware from operation.
+#define EM_EEPROM_START         0x14000000
+#define EM_EEPROM_SIZE          0x8000
+
+; The following defines describe device specific memory regions and must not be changed.
+; Supervisory flash: User data
+#define SFLASH_USER_DATA_START  0x16000800
+#define SFLASH_USER_DATA_SIZE   0x00000800
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+#define SFLASH_NAR_START        0x16001A00
+#define SFLASH_NAR_SIZE         0x00000200
+
+; Supervisory flash: Public Key
+#define SFLASH_PUBLIC_KEY_START 0x16005A00
+#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
+
+; Supervisory flash: Table of Content # 2
+#define SFLASH_TOC_2_START      0x16007C00
+#define SFLASH_TOC_2_SIZE       0x00000200
+
+; Supervisory flash: Table of Content # 2 Copy
+#define SFLASH_RTOC_2_START     0x16007E00
+#define SFLASH_RTOC_2_SIZE      0x00000200
+
+; External memory
+#define XIP_START               0x18000000
+#define XIP_SIZE                0x08000000
+
+; eFuse
+#define EFUSE_START             0x90700000
+#define EFUSE_SIZE              0x100000
+
+
+; Cortex-M0+ application flash image area
+LR_IROM FLASH_START FLASH_CM0P_SIZE
+{
+    .cy_m0p_image +0 FLASH_CM0P_SIZE
+    {
+        * (.cy_m0p_image)
+    }
+}
+
+; Cortex-M4 application flash area
+LR_IROM1 (FLASH_START + FLASH_CM0P_SIZE) (FLASH_SIZE - FLASH_CM0P_SIZE)
+{
+    ER_FLASH_VECTORS +0
+    {
+        * (RESET, +FIRST)
+    }
+
+    ER_FLASH_CODE +0 FIXED
+    {
+        * (InRoot$$Sections)
+        * (+RO)
+    }
+
+    ER_RAM_VECTORS RAM_START UNINIT
+    {
+        * (RESET_RAM, +FIRST)
+    }
+
+    RW_RAM_DATA +0
+    {
+        * (.cy_ramfunc)
+        * (+RW, +ZI)
+    }
+
+    ; Place variables in the section that should not be initialized during the
+    ; device startup.
+    RW_IRAM1 +0 UNINIT
+    {
+        * (.noinit)
+    }
+
+    ; Application heap area (HEAP)
+    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
+    {
+    }
+
+    ; Stack region growing down
+    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
+    {
+    }
+
+    ; Used for the digital signature of the secure application and the
+    ; Bootloader SDK application. The size of the section depends on the required
+    ; data size.
+    .cy_app_signature (FLASH_START + FLASH_SIZE - 256) 256
+    {
+        * (.cy_app_signature)
+    }
+}
+
+
+; Emulated EEPROM Flash area
+LR_EM_EEPROM EM_EEPROM_START EM_EEPROM_SIZE
+{
+    .cy_em_eeprom +0
+    {
+        * (.cy_em_eeprom)
+    }
+}
+
+; Supervisory flash: User data
+LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
+{
+    .cy_sflash_user_data +0
+    {
+        * (.cy_sflash_user_data)
+    }
+}
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
+{
+    .cy_sflash_nar +0
+    {
+        * (.cy_sflash_nar)
+    }
+}
+
+; Supervisory flash: Public Key
+LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
+{
+    .cy_sflash_public_key +0
+    {
+        * (.cy_sflash_public_key)
+    }
+}
+
+; Supervisory flash: Table of Content # 2
+LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
+{
+    .cy_toc_part2 +0
+    {
+        * (.cy_toc_part2)
+    }
+}
+
+; Supervisory flash: Table of Content # 2 Copy
+LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
+{
+    .cy_rtoc_part2 +0
+    {
+        * (.cy_rtoc_part2)
+    }
+}
+
+
+; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
+LR_EROM XIP_START XIP_SIZE
+{
+    cy_xip +0
+    {
+        * (.cy_xip)
+    }
+}
+
+
+; eFuse
+LR_EFUSE EFUSE_START EFUSE_SIZE
+{
+    .cy_efuse +0
+    {
+        * (.cy_efuse)
+    }
+}
+
+
+; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
+CYMETA 0x90500000
+{
+    .cymeta +0 { * (.cymeta) }
+}
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+#define __cy_memory_0_start 0x10000000
+#define __cy_memory_0_length  0x00100000
+#define __cy_memory_0_row_size 0x200
+
+/* Emulated EEPROM Flash area */
+#define __cy_memory_1_start    0x14000000
+#define __cy_memory_1_length   0x8000
+#define __cy_memory_1_row_size 0x200
+
+/* Supervisory Flash */
+#define __cy_memory_2_start    0x16000000
+#define __cy_memory_2_length   0x8000
+#define __cy_memory_2_row_size 0x200
+
+/* XIP */
+#define __cy_memory_3_start    0x18000000
+#define __cy_memory_3_length   0x08000000
+#define __cy_memory_3_row_size 0x200
+
+/* eFuse */
+#define __cy_memory_4_start    0x90700000
+#define __cy_memory_4_length   0x100000
+#define __cy_memory_4_row_size 1
+
+
+/* [] END OF FILE */

bsp/Infineon/psoc6-cy8ckit-062-WIFI-BT/libs/TARGET_CY8CKIT-062-WIFI-BT/COMPONENT_CM4/TOOLCHAIN_IAR/cy8c6xx7_cm4_dual.icf

@@ -1,247 +1,247 @@
-/*******************************************************************************
-* \file cy8c6xx7_cm4_dual.icf
-* \version 2.91
-*
-* Linker file for the IAR compiler.
-*
-* The main purpose of the linker script is to describe how the sections in the
-* input files should be mapped into the output file, and to control the memory
-* layout of the output file.
-*
-* \note The entry point is fixed and starts at 0x10000000. The valid application
-* image should be placed there.
-*
-* \note The linker files included with the PDL template projects must be generic
-* and handle all common use cases. Your project may not use every section
-* defined in the linker files. In that case you may see warnings during the
-* build process. In your project, you can simply comment out or remove the
-* relevant code in the linker file.
-*
-********************************************************************************
-* \copyright
-* Copyright 2016-2021 Cypress Semiconductor Corporation
-* SPDX-License-Identifier: Apache-2.0
-*
-* Licensed under the Apache License, Version 2.0 (the "License");
-* you may not use this file except in compliance with the License.
-* You may obtain a copy of the License at
-*
-*     http://www.apache.org/licenses/LICENSE-2.0
-*
-* Unless required by applicable law or agreed to in writing, software
-* distributed under the License is distributed on an "AS IS" BASIS,
-* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-* See the License for the specific language governing permissions and
-* limitations under the License.
-*******************************************************************************/
-
-/*###ICF### Section handled by ICF editor, don't touch! ****/
-/*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
-/*-Specials-*/
-define symbol __ICFEDIT_intvec_start__ = 0x00000000;
-
-/* The symbols below define the location and size of blocks of memory in the target.
- * Use these symbols to specify the memory regions available for allocation.
- */
-
-/* The following symbols control RAM and flash memory allocation for the CM4 core.
- * You can change the memory allocation by editing RAM and Flash symbols.
- * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
- * Using this memory region for other purposes will lead to unexpected behavior.
- * Your changes must be aligned with the corresponding symbols for CM0+ core in 'xx_cm0plus.icf',
- * where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.icf'.
- */
-/* RAM */
-define symbol __ICFEDIT_region_IRAM1_start__ = 0x08002000;
-define symbol __ICFEDIT_region_IRAM1_end__   = 0x080477FF;
-
-/* Flash */
-define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
-define symbol __ICFEDIT_region_IROM1_end__   = 0x100FFFFF;
-
-/* The following symbols define a 32K flash region used for EEPROM emulation.
- * This region can also be used as the general purpose flash.
- * You can assign sections to this memory region for only one of the cores.
- * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
- * Therefore, repurposing this memory region will prevent such middleware from operation.
- */
-define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
-define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
-
-/* The following symbols define device specific memory regions and must not be changed. */
-/* Supervisory FLASH - User Data */
-define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
-define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
-
-/* Supervisory FLASH - Normal Access Restrictions (NAR) */
-define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
-define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
-
-/* Supervisory FLASH - Public Key */
-define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
-define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
-
-/* Supervisory FLASH - Table of Content # 2 */
-define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
-define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
-
-/* Supervisory FLASH - Table of Content # 2 Copy */
-define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
-define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
-
-/* eFuse */
-define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
-define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
-
-/* XIP */
-define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
-define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
-
-define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
-define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
-
-
-define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
-/*-Sizes-*/
-if (!isdefinedsymbol(__STACK_SIZE)) {
-  define symbol __ICFEDIT_size_cstack__ = 0x1000;
-} else {
-  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
-}
-define symbol __ICFEDIT_size_proc_stack__ = 0x0;
-
-/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
-if (!isdefinedsymbol(__HEAP_SIZE)) {
-    define symbol __ICFEDIT_size_heap__ = 0x0400;
-} else {
-  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
-}
-/**** End of ICF editor section. ###ICF###*/
-
-/* By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
- * More about CM0+ prebuilt images, see here:
- * https://github.com/cypresssemiconductorco/psoc6cm0p
- */
-/* The size of the Cortex-M0+ application image */
-define symbol FLASH_CM0P_SIZE  = 0x2000;
-
-define memory mem with size = 4G;
-define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
-define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
-define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
-define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
-define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
-define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
-define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
-define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
-define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
-define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
-
-define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
-define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
-define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
-define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
-define block CM0P_RO with size = FLASH_CM0P_SIZE  { readonly section .cy_m0p_image };
-define block RO     {first section .intvec, readonly};
-
-define block cy_xip { section .cy_xip };
-
-/*-Initializations-*/
-initialize by copy { readwrite };
-do not initialize  { section .noinit, section .intvec_ram };
-
-/*-Placement-*/
-
-/* Flash - Cortex-M0+ application image */
-place at start of IROM1_region  { block CM0P_RO };
-
-/* Flash - Cortex-M4 application */
-place in          IROM1_region  { block RO };
-
-/* Used for the digital signature of the secure application and the Bootloader SDK application. */
-".cy_app_signature" : place at address (__ICFEDIT_region_IROM1_end__ - 0x200) { section .cy_app_signature };
-
-/* Emulated EEPROM Flash area */
-".cy_em_eeprom" : place at start of IROM2_region  { section .cy_em_eeprom };
-
-/* Supervisory Flash - User Data */
-".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
-
-/* Supervisory Flash - NAR */
-".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
-
-/* Supervisory Flash - Public Key */
-".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
-
-/* Supervisory Flash - TOC2 */
-".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
-
-/* Supervisory Flash - RTOC2 */
-".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
-
-/* eFuse */
-".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
-
-/* Execute in Place (XIP). See the smif driver documentation for details. */
-"cy_xip" : place at start of EROM1_region  { block cy_xip };
-
-/* RAM */
-place at start of IRAM1_region  { readwrite section .intvec_ram};
-place in          IRAM1_region  { readwrite };
-place at end   of IRAM1_region  { block HSTACK };
-
-/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
-".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
-
-
-keep {  section .cy_m0p_image,
-        section .cy_app_signature,
-        section .cy_em_eeprom,
-        section .cy_sflash_user_data,
-        section .cy_sflash_nar,
-        section .cy_sflash_public_key,
-        section .cy_toc_part2,
-        section .cy_rtoc_part2,
-        section .cy_efuse,
-        section .cy_xip,
-        section .cymeta,
-         };
-
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-define exported symbol __cy_memory_0_start    = 0x10000000;
-define exported symbol __cy_memory_0_length   = 0x00100000;
-define exported symbol __cy_memory_0_row_size = 0x200;
-
-/* Emulated EEPROM Flash area */
-define exported symbol __cy_memory_1_start    = 0x14000000;
-define exported symbol __cy_memory_1_length   = 0x8000;
-define exported symbol __cy_memory_1_row_size = 0x200;
-
-/* Supervisory Flash */
-define exported symbol __cy_memory_2_start    = 0x16000000;
-define exported symbol __cy_memory_2_length   = 0x8000;
-define exported symbol __cy_memory_2_row_size = 0x200;
-
-/* XIP */
-define exported symbol __cy_memory_3_start    = 0x18000000;
-define exported symbol __cy_memory_3_length   = 0x08000000;
-define exported symbol __cy_memory_3_row_size = 0x200;
-
-/* eFuse */
-define exported symbol __cy_memory_4_start    = 0x90700000;
-define exported symbol __cy_memory_4_length   = 0x100000;
-define exported symbol __cy_memory_4_row_size = 1;
-
-/* EOF */
+/*******************************************************************************
+* \file cy8c6xx7_cm4_dual.icf
+* \version 2.91
+*
+* Linker file for the IAR compiler.
+*
+* The main purpose of the linker script is to describe how the sections in the
+* input files should be mapped into the output file, and to control the memory
+* layout of the output file.
+*
+* \note The entry point is fixed and starts at 0x10000000. The valid application
+* image should be placed there.
+*
+* \note The linker files included with the PDL template projects must be generic
+* and handle all common use cases. Your project may not use every section
+* defined in the linker files. In that case you may see warnings during the
+* build process. In your project, you can simply comment out or remove the
+* relevant code in the linker file.
+*
+********************************************************************************
+* \copyright
+* Copyright 2016-2021 Cypress Semiconductor Corporation
+* SPDX-License-Identifier: Apache-2.0
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*******************************************************************************/
+
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+
+/* The symbols below define the location and size of blocks of memory in the target.
+ * Use these symbols to specify the memory regions available for allocation.
+ */
+
+/* The following symbols control RAM and flash memory allocation for the CM4 core.
+ * You can change the memory allocation by editing RAM and Flash symbols.
+ * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+ * Using this memory region for other purposes will lead to unexpected behavior.
+ * Your changes must be aligned with the corresponding symbols for CM0+ core in 'xx_cm0plus.icf',
+ * where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.icf'.
+ */
+/* RAM */
+define symbol __ICFEDIT_region_IRAM1_start__ = 0x08002000;
+define symbol __ICFEDIT_region_IRAM1_end__   = 0x080477FF;
+
+/* Flash */
+define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
+define symbol __ICFEDIT_region_IROM1_end__   = 0x100FFFFF;
+
+/* The following symbols define a 32K flash region used for EEPROM emulation.
+ * This region can also be used as the general purpose flash.
+ * You can assign sections to this memory region for only one of the cores.
+ * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
+ * Therefore, repurposing this memory region will prevent such middleware from operation.
+ */
+define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
+define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
+
+/* The following symbols define device specific memory regions and must not be changed. */
+/* Supervisory FLASH - User Data */
+define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
+define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
+
+/* Supervisory FLASH - Normal Access Restrictions (NAR) */
+define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
+define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
+
+/* Supervisory FLASH - Public Key */
+define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
+define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
+
+/* Supervisory FLASH - Table of Content # 2 */
+define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
+define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
+
+/* Supervisory FLASH - Table of Content # 2 Copy */
+define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
+define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
+
+/* eFuse */
+define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
+define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
+
+/* XIP */
+define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
+define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
+
+define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
+define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
+
+
+define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
+/*-Sizes-*/
+if (!isdefinedsymbol(__STACK_SIZE)) {
+  define symbol __ICFEDIT_size_cstack__ = 0x1000;
+} else {
+  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
+}
+define symbol __ICFEDIT_size_proc_stack__ = 0x0;
+
+/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
+if (!isdefinedsymbol(__HEAP_SIZE)) {
+    define symbol __ICFEDIT_size_heap__ = 0x0400;
+} else {
+  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
+}
+/**** End of ICF editor section. ###ICF###*/
+
+/* By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
+ * More about CM0+ prebuilt images, see here:
+ * https://github.com/cypresssemiconductorco/psoc6cm0p
+ */
+/* The size of the Cortex-M0+ application image */
+define symbol FLASH_CM0P_SIZE  = 0x2000;
+
+define memory mem with size = 4G;
+define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
+define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
+define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
+define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
+define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
+define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
+define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
+define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
+define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
+define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
+
+define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
+define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
+define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
+define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
+define block CM0P_RO with size = FLASH_CM0P_SIZE  { readonly section .cy_m0p_image };
+define block RO     {first section .intvec, readonly};
+
+define block cy_xip { section .cy_xip };
+
+/*-Initializations-*/
+initialize by copy { readwrite };
+do not initialize  { section .noinit, section .intvec_ram };
+
+/*-Placement-*/
+
+/* Flash - Cortex-M0+ application image */
+place at start of IROM1_region  { block CM0P_RO };
+
+/* Flash - Cortex-M4 application */
+place in          IROM1_region  { block RO };
+
+/* Used for the digital signature of the secure application and the Bootloader SDK application. */
+".cy_app_signature" : place at address (__ICFEDIT_region_IROM1_end__ - 0x200) { section .cy_app_signature };
+
+/* Emulated EEPROM Flash area */
+".cy_em_eeprom" : place at start of IROM2_region  { section .cy_em_eeprom };
+
+/* Supervisory Flash - User Data */
+".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
+
+/* Supervisory Flash - NAR */
+".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
+
+/* Supervisory Flash - Public Key */
+".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
+
+/* Supervisory Flash - TOC2 */
+".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
+
+/* Supervisory Flash - RTOC2 */
+".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
+
+/* eFuse */
+".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
+
+/* Execute in Place (XIP). See the smif driver documentation for details. */
+"cy_xip" : place at start of EROM1_region  { block cy_xip };
+
+/* RAM */
+place at start of IRAM1_region  { readwrite section .intvec_ram};
+place in          IRAM1_region  { readwrite };
+place at end   of IRAM1_region  { block HSTACK };
+
+/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
+".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
+
+
+keep {  section .cy_m0p_image,
+        section .cy_app_signature,
+        section .cy_em_eeprom,
+        section .cy_sflash_user_data,
+        section .cy_sflash_nar,
+        section .cy_sflash_public_key,
+        section .cy_toc_part2,
+        section .cy_rtoc_part2,
+        section .cy_efuse,
+        section .cy_xip,
+        section .cymeta,
+         };
+
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+define exported symbol __cy_memory_0_start    = 0x10000000;
+define exported symbol __cy_memory_0_length   = 0x00100000;
+define exported symbol __cy_memory_0_row_size = 0x200;
+
+/* Emulated EEPROM Flash area */
+define exported symbol __cy_memory_1_start    = 0x14000000;
+define exported symbol __cy_memory_1_length   = 0x8000;
+define exported symbol __cy_memory_1_row_size = 0x200;
+
+/* Supervisory Flash */
+define exported symbol __cy_memory_2_start    = 0x16000000;
+define exported symbol __cy_memory_2_length   = 0x8000;
+define exported symbol __cy_memory_2_row_size = 0x200;
+
+/* XIP */
+define exported symbol __cy_memory_3_start    = 0x18000000;
+define exported symbol __cy_memory_3_length   = 0x08000000;
+define exported symbol __cy_memory_3_row_size = 0x200;
+
+/* eFuse */
+define exported symbol __cy_memory_4_start    = 0x90700000;
+define exported symbol __cy_memory_4_length   = 0x100000;
+define exported symbol __cy_memory_4_row_size = 1;
+
+/* EOF */

bsp/Infineon/psoc6-cy8ckit-062s4/board/linker_scripts/link.icf

@@ -1,240 +1,240 @@
-/*******************************************************************************
-* \file cy8c6xx4_cm4_dual.icf
-* \version 2.91
-*
-* Linker file for the IAR compiler.
-*
-* The main purpose of the linker script is to describe how the sections in the
-* input files should be mapped into the output file, and to control the memory
-* layout of the output file.
-*
-* \note The entry point is fixed and starts at 0x10000000. The valid application
-* image should be placed there.
-*
-* \note The linker files included with the PDL template projects must be generic
-* and handle all common use cases. Your project may not use every section
-* defined in the linker files. In that case you may see warnings during the
-* build process. In your project, you can simply comment out or remove the
-* relevant code in the linker file.
-*
-********************************************************************************
-* \copyright
-* Copyright 2016-2021 Cypress Semiconductor Corporation
-* SPDX-License-Identifier: Apache-2.0
-*
-* Licensed under the Apache License, Version 2.0 (the "License");
-* you may not use this file except in compliance with the License.
-* You may obtain a copy of the License at
-*
-*     http://www.apache.org/licenses/LICENSE-2.0
-*
-* Unless required by applicable law or agreed to in writing, software
-* distributed under the License is distributed on an "AS IS" BASIS,
-* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-* See the License for the specific language governing permissions and
-* limitations under the License.
-*******************************************************************************/
-
-/*###ICF### Section handled by ICF editor, don't touch! ****/
-/*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
-/*-Specials-*/
-define symbol __ICFEDIT_intvec_start__ = 0x00000000;
-
-/* The symbols below define the location and size of blocks of memory in the target.
- * Use these symbols to specify the memory regions available for allocation.
- */
-
-/* The following symbols control RAM and flash memory allocation for the CM4 core.
- * You can change the memory allocation by editing RAM and Flash symbols.
- * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
- * Using this memory region for other purposes will lead to unexpected behavior.
- * Your changes must be aligned with the corresponding symbols for CM0+ core in 'xx_cm0plus.icf',
- * where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.icf'.
- */
-/* RAM */
-define symbol __ICFEDIT_region_IRAM1_start__ = 0x08002000;
-define symbol __ICFEDIT_region_IRAM1_end__   = 0x0801F7FF;
-
-/* Flash */
-define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
-define symbol __ICFEDIT_region_IROM1_end__   = 0x1003FFFF;
-
-/* The following symbols define a 32K flash region used for EEPROM emulation.
- * This region can also be used as the general purpose flash.
- * You can assign sections to this memory region for only one of the cores.
- * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
- * Therefore, repurposing this memory region will prevent such middleware from operation.
- */
-define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
-define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
-
-/* The following symbols define device specific memory regions and must not be changed. */
-/* Supervisory FLASH - User Data */
-define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
-define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
-
-/* Supervisory FLASH - Normal Access Restrictions (NAR) */
-define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
-define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
-
-/* Supervisory FLASH - Public Key */
-define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
-define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
-
-/* Supervisory FLASH - Table of Content # 2 */
-define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
-define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
-
-/* Supervisory FLASH - Table of Content # 2 Copy */
-define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
-define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
-
-/* eFuse */
-define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
-define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
-
-/* XIP */
-define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
-define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
-
-define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
-define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
-
-
-define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
-/*-Sizes-*/
-if (!isdefinedsymbol(__STACK_SIZE)) {
-  define symbol __ICFEDIT_size_cstack__ = 0x1000;
-} else {
-  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
-}
-define symbol __ICFEDIT_size_proc_stack__ = 0x0;
-
-/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
-if (!isdefinedsymbol(__HEAP_SIZE)) {
-    define symbol __ICFEDIT_size_heap__ = 0x0400;
-} else {
-  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
-}
-/**** End of ICF editor section. ###ICF###*/
-
-/* By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
- * More about CM0+ prebuilt images, see here:
- * https://github.com/cypresssemiconductorco/psoc6cm0p
- */
-/* The size of the Cortex-M0+ application image */
-define symbol FLASH_CM0P_SIZE  = 0x2000;
-
-define memory mem with size = 4G;
-define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
-define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
-define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
-define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
-define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
-define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
-define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
-define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
-define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
-define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
-
-define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
-define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
-define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
-define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
-define block CM0P_RO with size = FLASH_CM0P_SIZE  { readonly section .cy_m0p_image };
-define block RO     {first section .intvec, readonly};
-
-define block cy_xip { section .cy_xip };
-
-/*-Initializations-*/
-initialize by copy { readwrite };
-do not initialize  { section .noinit, section .intvec_ram };
-
-/*-Placement-*/
-
-/* Flash - Cortex-M0+ application image */
-place at start of IROM1_region  { block CM0P_RO };
-
-/* Flash - Cortex-M4 application */
-place in          IROM1_region  { block RO };
-
-/* Used for the digital signature of the secure application and the Bootloader SDK application. */
-".cy_app_signature" : place at address (__ICFEDIT_region_IROM1_end__ - 0x200) { section .cy_app_signature };
-
-
-/* Supervisory Flash - User Data */
-".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
-
-/* Supervisory Flash - NAR */
-".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
-
-/* Supervisory Flash - Public Key */
-".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
-
-/* Supervisory Flash - TOC2 */
-".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
-
-/* Supervisory Flash - RTOC2 */
-".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
-
-/* eFuse */
-".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
-
-/* Execute in Place (XIP). See the smif driver documentation for details. */
-"cy_xip" : place at start of EROM1_region  { block cy_xip };
-
-/* RAM */
-place at start of IRAM1_region  { readwrite section .intvec_ram};
-place in          IRAM1_region  { readwrite };
-place at end   of IRAM1_region  { block HSTACK };
-
-/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
-".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
-
-
-keep {  section .cy_m0p_image,
-        section .cy_app_signature,
-        section .cy_sflash_user_data,
-        section .cy_sflash_nar,
-        section .cy_sflash_public_key,
-        section .cy_toc_part2,
-        section .cy_rtoc_part2,
-        section .cy_efuse,
-        section .cy_xip,
-        section .cymeta,
-         };
-
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-define exported symbol __cy_memory_0_start    = 0x10000000;
-define exported symbol __cy_memory_0_length   = 0x00040000;
-define exported symbol __cy_memory_0_row_size = 0x200;
-
-
-/* Supervisory Flash */
-define exported symbol __cy_memory_2_start    = 0x16000000;
-define exported symbol __cy_memory_2_length   = 0x8000;
-define exported symbol __cy_memory_2_row_size = 0x200;
-
-/* XIP */
-define exported symbol __cy_memory_3_start    = 0x18000000;
-define exported symbol __cy_memory_3_length   = 0x08000000;
-define exported symbol __cy_memory_3_row_size = 0x200;
-
-/* eFuse */
-define exported symbol __cy_memory_4_start    = 0x90700000;
-define exported symbol __cy_memory_4_length   = 0x100000;
-define exported symbol __cy_memory_4_row_size = 1;
-
-/* EOF */
+/*******************************************************************************
+* \file cy8c6xx4_cm4_dual.icf
+* \version 2.91
+*
+* Linker file for the IAR compiler.
+*
+* The main purpose of the linker script is to describe how the sections in the
+* input files should be mapped into the output file, and to control the memory
+* layout of the output file.
+*
+* \note The entry point is fixed and starts at 0x10000000. The valid application
+* image should be placed there.
+*
+* \note The linker files included with the PDL template projects must be generic
+* and handle all common use cases. Your project may not use every section
+* defined in the linker files. In that case you may see warnings during the
+* build process. In your project, you can simply comment out or remove the
+* relevant code in the linker file.
+*
+********************************************************************************
+* \copyright
+* Copyright 2016-2021 Cypress Semiconductor Corporation
+* SPDX-License-Identifier: Apache-2.0
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*******************************************************************************/
+
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+
+/* The symbols below define the location and size of blocks of memory in the target.
+ * Use these symbols to specify the memory regions available for allocation.
+ */
+
+/* The following symbols control RAM and flash memory allocation for the CM4 core.
+ * You can change the memory allocation by editing RAM and Flash symbols.
+ * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+ * Using this memory region for other purposes will lead to unexpected behavior.
+ * Your changes must be aligned with the corresponding symbols for CM0+ core in 'xx_cm0plus.icf',
+ * where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.icf'.
+ */
+/* RAM */
+define symbol __ICFEDIT_region_IRAM1_start__ = 0x08002000;
+define symbol __ICFEDIT_region_IRAM1_end__   = 0x0801F7FF;
+
+/* Flash */
+define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
+define symbol __ICFEDIT_region_IROM1_end__   = 0x1003FFFF;
+
+/* The following symbols define a 32K flash region used for EEPROM emulation.
+ * This region can also be used as the general purpose flash.
+ * You can assign sections to this memory region for only one of the cores.
+ * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
+ * Therefore, repurposing this memory region will prevent such middleware from operation.
+ */
+define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
+define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
+
+/* The following symbols define device specific memory regions and must not be changed. */
+/* Supervisory FLASH - User Data */
+define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
+define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
+
+/* Supervisory FLASH - Normal Access Restrictions (NAR) */
+define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
+define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
+
+/* Supervisory FLASH - Public Key */
+define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
+define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
+
+/* Supervisory FLASH - Table of Content # 2 */
+define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
+define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
+
+/* Supervisory FLASH - Table of Content # 2 Copy */
+define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
+define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
+
+/* eFuse */
+define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
+define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
+
+/* XIP */
+define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
+define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
+
+define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
+define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
+
+
+define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
+/*-Sizes-*/
+if (!isdefinedsymbol(__STACK_SIZE)) {
+  define symbol __ICFEDIT_size_cstack__ = 0x1000;
+} else {
+  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
+}
+define symbol __ICFEDIT_size_proc_stack__ = 0x0;
+
+/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
+if (!isdefinedsymbol(__HEAP_SIZE)) {
+    define symbol __ICFEDIT_size_heap__ = 0x0400;
+} else {
+  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
+}
+/**** End of ICF editor section. ###ICF###*/
+
+/* By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
+ * More about CM0+ prebuilt images, see here:
+ * https://github.com/cypresssemiconductorco/psoc6cm0p
+ */
+/* The size of the Cortex-M0+ application image */
+define symbol FLASH_CM0P_SIZE  = 0x2000;
+
+define memory mem with size = 4G;
+define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
+define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
+define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
+define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
+define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
+define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
+define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
+define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
+define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
+define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
+
+define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
+define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
+define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
+define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
+define block CM0P_RO with size = FLASH_CM0P_SIZE  { readonly section .cy_m0p_image };
+define block RO     {first section .intvec, readonly};
+
+define block cy_xip { section .cy_xip };
+
+/*-Initializations-*/
+initialize by copy { readwrite };
+do not initialize  { section .noinit, section .intvec_ram };
+
+/*-Placement-*/
+
+/* Flash - Cortex-M0+ application image */
+place at start of IROM1_region  { block CM0P_RO };
+
+/* Flash - Cortex-M4 application */
+place in          IROM1_region  { block RO };
+
+/* Used for the digital signature of the secure application and the Bootloader SDK application. */
+".cy_app_signature" : place at address (__ICFEDIT_region_IROM1_end__ - 0x200) { section .cy_app_signature };
+
+
+/* Supervisory Flash - User Data */
+".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
+
+/* Supervisory Flash - NAR */
+".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
+
+/* Supervisory Flash - Public Key */
+".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
+
+/* Supervisory Flash - TOC2 */
+".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
+
+/* Supervisory Flash - RTOC2 */
+".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
+
+/* eFuse */
+".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
+
+/* Execute in Place (XIP). See the smif driver documentation for details. */
+"cy_xip" : place at start of EROM1_region  { block cy_xip };
+
+/* RAM */
+place at start of IRAM1_region  { readwrite section .intvec_ram};
+place in          IRAM1_region  { readwrite };
+place at end   of IRAM1_region  { block HSTACK };
+
+/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
+".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
+
+
+keep {  section .cy_m0p_image,
+        section .cy_app_signature,
+        section .cy_sflash_user_data,
+        section .cy_sflash_nar,
+        section .cy_sflash_public_key,
+        section .cy_toc_part2,
+        section .cy_rtoc_part2,
+        section .cy_efuse,
+        section .cy_xip,
+        section .cymeta,
+         };
+
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+define exported symbol __cy_memory_0_start    = 0x10000000;
+define exported symbol __cy_memory_0_length   = 0x00040000;
+define exported symbol __cy_memory_0_row_size = 0x200;
+
+
+/* Supervisory Flash */
+define exported symbol __cy_memory_2_start    = 0x16000000;
+define exported symbol __cy_memory_2_length   = 0x8000;
+define exported symbol __cy_memory_2_row_size = 0x200;
+
+/* XIP */
+define exported symbol __cy_memory_3_start    = 0x18000000;
+define exported symbol __cy_memory_3_length   = 0x08000000;
+define exported symbol __cy_memory_3_row_size = 0x200;
+
+/* eFuse */
+define exported symbol __cy_memory_4_start    = 0x90700000;
+define exported symbol __cy_memory_4_length   = 0x100000;
+define exported symbol __cy_memory_4_row_size = 1;
+
+/* EOF */

bsp/Infineon/psoc6-cy8ckit-062s4/board/linker_scripts/link.sct

@@ -1,258 +1,258 @@
-#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m4
-; The first line specifies a preprocessor command that the linker invokes
-; to pass a scatter file through a C preprocessor.
-
-;*******************************************************************************
-;* \file cy8c6xx4_cm4_dual.sct
-;* \version 2.91
-;*
-;* Linker file for the ARMCC.
-;*
-;* The main purpose of the linker script is to describe how the sections in the
-;* input files should be mapped into the output file, and to control the memory
-;* layout of the output file.
-;*
-;* \note The entry point location is fixed and starts at 0x10000000. The valid
-;* application image should be placed there.
-;*
-;* \note The linker files included with the PDL template projects must be
-;* generic and handle all common use cases. Your project may not use every
-;* section defined in the linker files. In that case you may see the warnings
-;* during the build process: L6314W (no section matches pattern) and/or L6329W
-;* (pattern only matches removed unused sections). In your project, you can
-;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
-;* the linker, simply comment out or remove the relevant code in the linker
-;* file.
-;*
-;*******************************************************************************
-;* \copyright
-;* Copyright 2016-2021 Cypress Semiconductor Corporation
-;* SPDX-License-Identifier: Apache-2.0
-;*
-;* Licensed under the Apache License, Version 2.0 (the "License");
-;* you may not use this file except in compliance with the License.
-;* You may obtain a copy of the License at
-;*
-;*     http://www.apache.org/licenses/LICENSE-2.0
-;*
-;* Unless required by applicable law or agreed to in writing, software
-;* distributed under the License is distributed on an "AS IS" BASIS,
-;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-;* See the License for the specific language governing permissions and
-;* limitations under the License.
-;******************************************************************************/
-
-; The defines below describe the location and size of blocks of memory in the target.
-; Use these defines to specify the memory regions available for allocation.
-
-; The following defines control RAM and flash memory allocation for the CM4 core.
-; You can change the memory allocation by editing RAM and Flash defines.
-; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
-; Using this memory region for other purposes will lead to unexpected behavior.
-; Your changes must be aligned with the corresponding defines for CM0+ core in 'xx_cm0plus.scat',
-; where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.scat'.
-; RAM
-#define RAM_START               0x08002000
-#define RAM_SIZE                0x0001D800
-; Flash
-#define FLASH_START             0x10000000
-#define FLASH_SIZE              0x00040000
-
-; The size of the stack section at the end of CM4 SRAM
-#define STACK_SIZE              0x00001000
-
-; By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
-; More about CM0+ prebuilt images, see here:
-; https://github.com/cypresssemiconductorco/psoc6cm0p
-; The size of the Cortex-M0+ application flash image
-#define FLASH_CM0P_SIZE         0x2000
-
-
-; The following defines describe device specific memory regions and must not be changed.
-; Supervisory flash: User data
-#define SFLASH_USER_DATA_START  0x16000800
-#define SFLASH_USER_DATA_SIZE   0x00000800
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-#define SFLASH_NAR_START        0x16001A00
-#define SFLASH_NAR_SIZE         0x00000200
-
-; Supervisory flash: Public Key
-#define SFLASH_PUBLIC_KEY_START 0x16005A00
-#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
-
-; Supervisory flash: Table of Content # 2
-#define SFLASH_TOC_2_START      0x16007C00
-#define SFLASH_TOC_2_SIZE       0x00000200
-
-; Supervisory flash: Table of Content # 2 Copy
-#define SFLASH_RTOC_2_START     0x16007E00
-#define SFLASH_RTOC_2_SIZE      0x00000200
-
-; External memory
-#define XIP_START               0x18000000
-#define XIP_SIZE                0x08000000
-
-; eFuse
-#define EFUSE_START             0x90700000
-#define EFUSE_SIZE              0x100000
-
-
-; Cortex-M0+ application flash image area
-LR_IROM FLASH_START FLASH_CM0P_SIZE
-{
-    .cy_m0p_image +0 FLASH_CM0P_SIZE
-    {
-        * (.cy_m0p_image)
-    }
-}
-
-; Cortex-M4 application flash area
-LR_IROM1 (FLASH_START + FLASH_CM0P_SIZE) (FLASH_SIZE - FLASH_CM0P_SIZE)
-{
-    ER_FLASH_VECTORS +0
-    {
-        * (RESET, +FIRST)
-    }
-
-    ER_FLASH_CODE +0 FIXED
-    {
-        * (InRoot$$Sections)
-        * (+RO)
-    }
-
-    ER_RAM_VECTORS RAM_START UNINIT
-    {
-        * (RESET_RAM, +FIRST)
-    }
-
-    RW_RAM_DATA +0
-    {
-        * (.cy_ramfunc)
-        * (+RW, +ZI)
-    }
-
-    ; Place variables in the section that should not be initialized during the
-    ; device startup.
-    RW_IRAM1 +0 UNINIT
-    {
-        * (.noinit)
-    }
-
-    ; Application heap area (HEAP)
-    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
-    { 
-    }
-
-    ; Stack region growing down
-    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
-    {
-    }
-
-    ; Used for the digital signature of the secure application and the
-    ; Bootloader SDK application. The size of the section depends on the required
-    ; data size.
-    .cy_app_signature (FLASH_START + FLASH_SIZE - 256) 256
-    {
-        * (.cy_app_signature)
-    }
-}
-
-
-
-; Supervisory flash: User data
-LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
-{
-    .cy_sflash_user_data +0
-    {
-        * (.cy_sflash_user_data)
-    }
-}
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
-{
-    .cy_sflash_nar +0
-    {
-        * (.cy_sflash_nar)
-    }
-}
-
-; Supervisory flash: Public Key
-LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
-{
-    .cy_sflash_public_key +0
-    {
-        * (.cy_sflash_public_key)
-    }
-}
-
-; Supervisory flash: Table of Content # 2
-LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
-{
-    .cy_toc_part2 +0
-    {
-        * (.cy_toc_part2)
-    }
-}
-
-; Supervisory flash: Table of Content # 2 Copy
-LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
-{
-    .cy_rtoc_part2 +0
-    {
-        * (.cy_rtoc_part2)
-    }
-}
-
-
-; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
-LR_EROM XIP_START XIP_SIZE
-{
-    cy_xip +0
-    {
-        * (.cy_xip)
-    }
-}
-
-
-; eFuse
-LR_EFUSE EFUSE_START EFUSE_SIZE
-{
-    .cy_efuse +0
-    {
-        * (.cy_efuse)
-    }
-}
-
-
-; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
-CYMETA 0x90500000
-{
-    .cymeta +0 { * (.cymeta) }
-}
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-#define __cy_memory_0_start 0x10000000
-#define __cy_memory_0_length  0x00040000
-#define __cy_memory_0_row_size 0x200
-
-
-/* Supervisory Flash */
-#define __cy_memory_2_start    0x16000000
-#define __cy_memory_2_length   0x8000
-#define __cy_memory_2_row_size 0x200
-
-/* XIP */
-#define __cy_memory_3_start    0x18000000
-#define __cy_memory_3_length   0x08000000
-#define __cy_memory_3_row_size 0x200
-
-/* eFuse */
-#define __cy_memory_4_start    0x90700000
-#define __cy_memory_4_length   0x100000
-#define __cy_memory_4_row_size 1
-
-
-/* [] END OF FILE */
+#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m4
+; The first line specifies a preprocessor command that the linker invokes
+; to pass a scatter file through a C preprocessor.
+
+;*******************************************************************************
+;* \file cy8c6xx4_cm4_dual.sct
+;* \version 2.91
+;*
+;* Linker file for the ARMCC.
+;*
+;* The main purpose of the linker script is to describe how the sections in the
+;* input files should be mapped into the output file, and to control the memory
+;* layout of the output file.
+;*
+;* \note The entry point location is fixed and starts at 0x10000000. The valid
+;* application image should be placed there.
+;*
+;* \note The linker files included with the PDL template projects must be
+;* generic and handle all common use cases. Your project may not use every
+;* section defined in the linker files. In that case you may see the warnings
+;* during the build process: L6314W (no section matches pattern) and/or L6329W
+;* (pattern only matches removed unused sections). In your project, you can
+;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
+;* the linker, simply comment out or remove the relevant code in the linker
+;* file.
+;*
+;*******************************************************************************
+;* \copyright
+;* Copyright 2016-2021 Cypress Semiconductor Corporation
+;* SPDX-License-Identifier: Apache-2.0
+;*
+;* Licensed under the Apache License, Version 2.0 (the "License");
+;* you may not use this file except in compliance with the License.
+;* You may obtain a copy of the License at
+;*
+;*     http://www.apache.org/licenses/LICENSE-2.0
+;*
+;* Unless required by applicable law or agreed to in writing, software
+;* distributed under the License is distributed on an "AS IS" BASIS,
+;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+;* See the License for the specific language governing permissions and
+;* limitations under the License.
+;******************************************************************************/
+
+; The defines below describe the location and size of blocks of memory in the target.
+; Use these defines to specify the memory regions available for allocation.
+
+; The following defines control RAM and flash memory allocation for the CM4 core.
+; You can change the memory allocation by editing RAM and Flash defines.
+; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+; Using this memory region for other purposes will lead to unexpected behavior.
+; Your changes must be aligned with the corresponding defines for CM0+ core in 'xx_cm0plus.scat',
+; where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.scat'.
+; RAM
+#define RAM_START               0x08002000
+#define RAM_SIZE                0x0001D800
+; Flash
+#define FLASH_START             0x10000000
+#define FLASH_SIZE              0x00040000
+
+; The size of the stack section at the end of CM4 SRAM
+#define STACK_SIZE              0x00001000
+
+; By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
+; More about CM0+ prebuilt images, see here:
+; https://github.com/cypresssemiconductorco/psoc6cm0p
+; The size of the Cortex-M0+ application flash image
+#define FLASH_CM0P_SIZE         0x2000
+
+
+; The following defines describe device specific memory regions and must not be changed.
+; Supervisory flash: User data
+#define SFLASH_USER_DATA_START  0x16000800
+#define SFLASH_USER_DATA_SIZE   0x00000800
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+#define SFLASH_NAR_START        0x16001A00
+#define SFLASH_NAR_SIZE         0x00000200
+
+; Supervisory flash: Public Key
+#define SFLASH_PUBLIC_KEY_START 0x16005A00
+#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
+
+; Supervisory flash: Table of Content # 2
+#define SFLASH_TOC_2_START      0x16007C00
+#define SFLASH_TOC_2_SIZE       0x00000200
+
+; Supervisory flash: Table of Content # 2 Copy
+#define SFLASH_RTOC_2_START     0x16007E00
+#define SFLASH_RTOC_2_SIZE      0x00000200
+
+; External memory
+#define XIP_START               0x18000000
+#define XIP_SIZE                0x08000000
+
+; eFuse
+#define EFUSE_START             0x90700000
+#define EFUSE_SIZE              0x100000
+
+
+; Cortex-M0+ application flash image area
+LR_IROM FLASH_START FLASH_CM0P_SIZE
+{
+    .cy_m0p_image +0 FLASH_CM0P_SIZE
+    {
+        * (.cy_m0p_image)
+    }
+}
+
+; Cortex-M4 application flash area
+LR_IROM1 (FLASH_START + FLASH_CM0P_SIZE) (FLASH_SIZE - FLASH_CM0P_SIZE)
+{
+    ER_FLASH_VECTORS +0
+    {
+        * (RESET, +FIRST)
+    }
+
+    ER_FLASH_CODE +0 FIXED
+    {
+        * (InRoot$$Sections)
+        * (+RO)
+    }
+
+    ER_RAM_VECTORS RAM_START UNINIT
+    {
+        * (RESET_RAM, +FIRST)
+    }
+
+    RW_RAM_DATA +0
+    {
+        * (.cy_ramfunc)
+        * (+RW, +ZI)
+    }
+
+    ; Place variables in the section that should not be initialized during the
+    ; device startup.
+    RW_IRAM1 +0 UNINIT
+    {
+        * (.noinit)
+    }
+
+    ; Application heap area (HEAP)
+    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
+    {
+    }
+
+    ; Stack region growing down
+    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
+    {
+    }
+
+    ; Used for the digital signature of the secure application and the
+    ; Bootloader SDK application. The size of the section depends on the required
+    ; data size.
+    .cy_app_signature (FLASH_START + FLASH_SIZE - 256) 256
+    {
+        * (.cy_app_signature)
+    }
+}
+
+
+
+; Supervisory flash: User data
+LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
+{
+    .cy_sflash_user_data +0
+    {
+        * (.cy_sflash_user_data)
+    }
+}
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
+{
+    .cy_sflash_nar +0
+    {
+        * (.cy_sflash_nar)
+    }
+}
+
+; Supervisory flash: Public Key
+LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
+{
+    .cy_sflash_public_key +0
+    {
+        * (.cy_sflash_public_key)
+    }
+}
+
+; Supervisory flash: Table of Content # 2
+LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
+{
+    .cy_toc_part2 +0
+    {
+        * (.cy_toc_part2)
+    }
+}
+
+; Supervisory flash: Table of Content # 2 Copy
+LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
+{
+    .cy_rtoc_part2 +0
+    {
+        * (.cy_rtoc_part2)
+    }
+}
+
+
+; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
+LR_EROM XIP_START XIP_SIZE
+{
+    cy_xip +0
+    {
+        * (.cy_xip)
+    }
+}
+
+
+; eFuse
+LR_EFUSE EFUSE_START EFUSE_SIZE
+{
+    .cy_efuse +0
+    {
+        * (.cy_efuse)
+    }
+}
+
+
+; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
+CYMETA 0x90500000
+{
+    .cymeta +0 { * (.cymeta) }
+}
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+#define __cy_memory_0_start 0x10000000
+#define __cy_memory_0_length  0x00040000
+#define __cy_memory_0_row_size 0x200
+
+
+/* Supervisory Flash */
+#define __cy_memory_2_start    0x16000000
+#define __cy_memory_2_length   0x8000
+#define __cy_memory_2_row_size 0x200
+
+/* XIP */
+#define __cy_memory_3_start    0x18000000
+#define __cy_memory_3_length   0x08000000
+#define __cy_memory_3_row_size 0x200
+
+/* eFuse */
+#define __cy_memory_4_start    0x90700000
+#define __cy_memory_4_length   0x100000
+#define __cy_memory_4_row_size 1
+
+
+/* [] END OF FILE */

bsp/Infineon/psoc6-cy8ckit-062s4/libs/TARGET_CY8CKIT-062S4/COMPONENT_CM0P/TOOLCHAIN_ARM/cy8c6xx4_cm0plus.sct

@@ -1,253 +1,253 @@
-#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m0
-; The first line specifies a preprocessor command that the linker invokes
-; to pass a scatter file through a C preprocessor.
-
-;*******************************************************************************
-;* \file cy8c6xx4_cm0plus.sct
-;* \version 2.91
-;*
-;* Linker file for the ARMCC.
-;*
-;* The main purpose of the linker script is to describe how the sections in the
-;* input files should be mapped into the output file, and to control the memory
-;* layout of the output file.
-;*
-;* \note The entry point location is fixed and starts at 0x10000000. The valid
-;* application image should be placed there.
-;*
-;* \note The linker files included with the PDL template projects must be
-;* generic and handle all common use cases. Your project may not use every
-;* section defined in the linker files. In that case you may see the warnings
-;* during the build process: L6314W (no section matches pattern) and/or L6329W
-;* (pattern only matches removed unused sections). In your project, you can
-;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
-;* the linker, simply comment out or remove the relevant code in the linker
-;* file.
-;*
-;*******************************************************************************
-;* \copyright
-;* Copyright 2016-2021 Cypress Semiconductor Corporation
-;* SPDX-License-Identifier: Apache-2.0
-;*
-;* Licensed under the Apache License, Version 2.0 (the "License");
-;* you may not use this file except in compliance with the License.
-;* You may obtain a copy of the License at
-;*
-;*     http://www.apache.org/licenses/LICENSE-2.0
-;*
-;* Unless required by applicable law or agreed to in writing, software
-;* distributed under the License is distributed on an "AS IS" BASIS,
-;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-;* See the License for the specific language governing permissions and
-;* limitations under the License.
-;******************************************************************************/
-
-; The defines below describe the location and size of blocks of memory in the target.
-; Use these defines to specify the memory regions available for allocation.
-
-; The following defines control RAM and flash memory allocation for the CM0+ core.
-; You can change the memory allocation by editing the RAM and Flash defines.
-; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
-; Using this memory region for other purposes will lead to unexpected behavior.
-; Your changes must be aligned with the corresponding defines for the CM4 core in 'xx_cm4_dual.scat',
-; where 'xx' is the device group; for example, 'cy8c6xx7_cm4_dual.scat'.
-; RAM
-#define RAM_START               0x08000000
-#define RAM_SIZE                0x00002000
-; Flash
-#define FLASH_START             0x10000000
-#define FLASH_SIZE              0x00002000
-
-; The size of the stack section at the end of CM0+ SRAM
-#define STACK_SIZE              0x00001000
-
-
-; The following defines describe device specific memory regions and must not be changed.
-; Supervisory flash: User data
-#define SFLASH_USER_DATA_START  0x16000800
-#define SFLASH_USER_DATA_SIZE   0x00000800
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-#define SFLASH_NAR_START        0x16001A00
-#define SFLASH_NAR_SIZE         0x00000200
-
-; Supervisory flash: Public Key
-#define SFLASH_PUBLIC_KEY_START 0x16005A00
-#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
-
-; Supervisory flash: Table of Content # 2
-#define SFLASH_TOC_2_START      0x16007C00
-#define SFLASH_TOC_2_SIZE       0x00000200
-
-; Supervisory flash: Table of Content # 2 Copy
-#define SFLASH_RTOC_2_START     0x16007E00
-#define SFLASH_RTOC_2_SIZE      0x00000200
-
-; External memory
-#define XIP_START               0x18000000
-#define XIP_SIZE                0x08000000
-
-; eFuse
-#define EFUSE_START             0x90700000
-#define EFUSE_SIZE              0x100000
-
-; Public RAM 
-; This is an unprotected public RAM region, with the placed .cy_sharedmem section.
-; This region is used to place objects that require full access from both cores.
-; Uncomment the following lines, define the region size and uncomment placement of
-; .cy_sharedmem section below.
-; #define PUBLIC_RAM_SIZE         %REGION_SIZE%
-; #define PUBLIC_RAM_START        (RAM_START + RAM_SIZE - STACK_SIZE - PUBLIC_RAM_SIZE)
-
-; Cortex-M0+ application flash area
-LR_IROM1 FLASH_START FLASH_SIZE
-{
-    .cy_app_header +0
-    {
-        * (.cy_app_header)
-    }
-
-    ER_FLASH_VECTORS +0
-    {
-        * (RESET, +FIRST)
-    }
-
-    ER_FLASH_CODE +0 FIXED
-    {
-        * (InRoot$$Sections)
-        * (+RO)
-    }
-
-    ER_RAM_VECTORS RAM_START UNINIT
-    {
-        * (RESET_RAM, +FIRST)
-    }
-
-    RW_RAM_DATA +0
-    {
-        * (.cy_ramfunc)
-        * (+RW, +ZI)
-    }
-
-    ; Place variables in the section that should not be initialized during the
-    ; device startup.
-    RW_IRAM1 +0 UNINIT
-    {
-        * (.noinit)
-    }
-
-    ; To use unprotected public RAM uncomment the following .cy_sharedmem section placement. Recalculate the HEAP start address.
-    ;RW_IRAM2 PUBLIC_RAM_START UNINIT
-    ;{
-    ;    * (.cy_sharedmem)
-    ;}
-
-    ; Application heap area (HEAP)
-    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
-    { 
-    }
-
-    ; Stack region growing down
-    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
-    {
-    }
-}
-
-
-
-; Supervisory flash: User data
-LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
-{
-    .cy_sflash_user_data +0
-    {
-        * (.cy_sflash_user_data)
-    }
-}
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
-{
-    .cy_sflash_nar +0
-    {
-        * (.cy_sflash_nar)
-    }
-}
-
-; Supervisory flash: Public Key
-LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
-{
-    .cy_sflash_public_key +0
-    {
-        * (.cy_sflash_public_key)
-    }
-}
-
-; Supervisory flash: Table of Content # 2
-LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
-{
-    .cy_toc_part2 +0
-    {
-        * (.cy_toc_part2)
-    }
-}
-
-; Supervisory flash: Table of Content # 2 Copy
-LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
-{
-    .cy_rtoc_part2 +0
-    {
-        * (.cy_rtoc_part2)
-    }
-}
-
-
-; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
-LR_EROM XIP_START XIP_SIZE
-{
-    cy_xip +0
-    {
-        * (.cy_xip)
-    }
-}
-
-
-; eFuse
-LR_EFUSE EFUSE_START EFUSE_SIZE
-{
-    .cy_efuse +0
-    {
-        * (.cy_efuse)
-    }
-}
-
-
-; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
-CYMETA 0x90500000
-{
-    .cymeta +0 { * (.cymeta) }
-}
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-#define __cy_memory_0_start 0x10000000
-#define __cy_memory_0_length  0x00040000
-#define __cy_memory_0_row_size 0x200
-
-
-/* Supervisory Flash */
-#define __cy_memory_2_start    0x16000000
-#define __cy_memory_2_length   0x8000
-#define __cy_memory_2_row_size 0x200
-
-/* XIP */
-#define __cy_memory_3_start    0x18000000
-#define __cy_memory_3_length   0x08000000
-#define __cy_memory_3_row_size 0x200
-
-/* eFuse */
-#define __cy_memory_4_start    0x90700000
-#define __cy_memory_4_length   0x100000
-#define __cy_memory_4_row_size 1
-
-
-/* [] END OF FILE */
+#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m0
+; The first line specifies a preprocessor command that the linker invokes
+; to pass a scatter file through a C preprocessor.
+
+;*******************************************************************************
+;* \file cy8c6xx4_cm0plus.sct
+;* \version 2.91
+;*
+;* Linker file for the ARMCC.
+;*
+;* The main purpose of the linker script is to describe how the sections in the
+;* input files should be mapped into the output file, and to control the memory
+;* layout of the output file.
+;*
+;* \note The entry point location is fixed and starts at 0x10000000. The valid
+;* application image should be placed there.
+;*
+;* \note The linker files included with the PDL template projects must be
+;* generic and handle all common use cases. Your project may not use every
+;* section defined in the linker files. In that case you may see the warnings
+;* during the build process: L6314W (no section matches pattern) and/or L6329W
+;* (pattern only matches removed unused sections). In your project, you can
+;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
+;* the linker, simply comment out or remove the relevant code in the linker
+;* file.
+;*
+;*******************************************************************************
+;* \copyright
+;* Copyright 2016-2021 Cypress Semiconductor Corporation
+;* SPDX-License-Identifier: Apache-2.0
+;*
+;* Licensed under the Apache License, Version 2.0 (the "License");
+;* you may not use this file except in compliance with the License.
+;* You may obtain a copy of the License at
+;*
+;*     http://www.apache.org/licenses/LICENSE-2.0
+;*
+;* Unless required by applicable law or agreed to in writing, software
+;* distributed under the License is distributed on an "AS IS" BASIS,
+;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+;* See the License for the specific language governing permissions and
+;* limitations under the License.
+;******************************************************************************/
+
+; The defines below describe the location and size of blocks of memory in the target.
+; Use these defines to specify the memory regions available for allocation.
+
+; The following defines control RAM and flash memory allocation for the CM0+ core.
+; You can change the memory allocation by editing the RAM and Flash defines.
+; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+; Using this memory region for other purposes will lead to unexpected behavior.
+; Your changes must be aligned with the corresponding defines for the CM4 core in 'xx_cm4_dual.scat',
+; where 'xx' is the device group; for example, 'cy8c6xx7_cm4_dual.scat'.
+; RAM
+#define RAM_START               0x08000000
+#define RAM_SIZE                0x00002000
+; Flash
+#define FLASH_START             0x10000000
+#define FLASH_SIZE              0x00002000
+
+; The size of the stack section at the end of CM0+ SRAM
+#define STACK_SIZE              0x00001000
+
+
+; The following defines describe device specific memory regions and must not be changed.
+; Supervisory flash: User data
+#define SFLASH_USER_DATA_START  0x16000800
+#define SFLASH_USER_DATA_SIZE   0x00000800
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+#define SFLASH_NAR_START        0x16001A00
+#define SFLASH_NAR_SIZE         0x00000200
+
+; Supervisory flash: Public Key
+#define SFLASH_PUBLIC_KEY_START 0x16005A00
+#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
+
+; Supervisory flash: Table of Content # 2
+#define SFLASH_TOC_2_START      0x16007C00
+#define SFLASH_TOC_2_SIZE       0x00000200
+
+; Supervisory flash: Table of Content # 2 Copy
+#define SFLASH_RTOC_2_START     0x16007E00
+#define SFLASH_RTOC_2_SIZE      0x00000200
+
+; External memory
+#define XIP_START               0x18000000
+#define XIP_SIZE                0x08000000
+
+; eFuse
+#define EFUSE_START             0x90700000
+#define EFUSE_SIZE              0x100000
+
+; Public RAM
+; This is an unprotected public RAM region, with the placed .cy_sharedmem section.
+; This region is used to place objects that require full access from both cores.
+; Uncomment the following lines, define the region size and uncomment placement of
+; .cy_sharedmem section below.
+; #define PUBLIC_RAM_SIZE         %REGION_SIZE%
+; #define PUBLIC_RAM_START        (RAM_START + RAM_SIZE - STACK_SIZE - PUBLIC_RAM_SIZE)
+
+; Cortex-M0+ application flash area
+LR_IROM1 FLASH_START FLASH_SIZE
+{
+    .cy_app_header +0
+    {
+        * (.cy_app_header)
+    }
+
+    ER_FLASH_VECTORS +0
+    {
+        * (RESET, +FIRST)
+    }
+
+    ER_FLASH_CODE +0 FIXED
+    {
+        * (InRoot$$Sections)
+        * (+RO)
+    }
+
+    ER_RAM_VECTORS RAM_START UNINIT
+    {
+        * (RESET_RAM, +FIRST)
+    }
+
+    RW_RAM_DATA +0
+    {
+        * (.cy_ramfunc)
+        * (+RW, +ZI)
+    }
+
+    ; Place variables in the section that should not be initialized during the
+    ; device startup.
+    RW_IRAM1 +0 UNINIT
+    {
+        * (.noinit)
+    }
+
+    ; To use unprotected public RAM uncomment the following .cy_sharedmem section placement. Recalculate the HEAP start address.
+    ;RW_IRAM2 PUBLIC_RAM_START UNINIT
+    ;{
+    ;    * (.cy_sharedmem)
+    ;}
+
+    ; Application heap area (HEAP)
+    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
+    {
+    }
+
+    ; Stack region growing down
+    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
+    {
+    }
+}
+
+
+
+; Supervisory flash: User data
+LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
+{
+    .cy_sflash_user_data +0
+    {
+        * (.cy_sflash_user_data)
+    }
+}
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
+{
+    .cy_sflash_nar +0
+    {
+        * (.cy_sflash_nar)
+    }
+}
+
+; Supervisory flash: Public Key
+LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
+{
+    .cy_sflash_public_key +0
+    {
+        * (.cy_sflash_public_key)
+    }
+}
+
+; Supervisory flash: Table of Content # 2
+LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
+{
+    .cy_toc_part2 +0
+    {
+        * (.cy_toc_part2)
+    }
+}
+
+; Supervisory flash: Table of Content # 2 Copy
+LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
+{
+    .cy_rtoc_part2 +0
+    {
+        * (.cy_rtoc_part2)
+    }
+}
+
+
+; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
+LR_EROM XIP_START XIP_SIZE
+{
+    cy_xip +0
+    {
+        * (.cy_xip)
+    }
+}
+
+
+; eFuse
+LR_EFUSE EFUSE_START EFUSE_SIZE
+{
+    .cy_efuse +0
+    {
+        * (.cy_efuse)
+    }
+}
+
+
+; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
+CYMETA 0x90500000
+{
+    .cymeta +0 { * (.cymeta) }
+}
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+#define __cy_memory_0_start 0x10000000
+#define __cy_memory_0_length  0x00040000
+#define __cy_memory_0_row_size 0x200
+
+
+/* Supervisory Flash */
+#define __cy_memory_2_start    0x16000000
+#define __cy_memory_2_length   0x8000
+#define __cy_memory_2_row_size 0x200
+
+/* XIP */
+#define __cy_memory_3_start    0x18000000
+#define __cy_memory_3_length   0x08000000
+#define __cy_memory_3_row_size 0x200
+
+/* eFuse */
+#define __cy_memory_4_start    0x90700000
+#define __cy_memory_4_length   0x100000
+#define __cy_memory_4_row_size 1
+
+
+/* [] END OF FILE */

bsp/Infineon/psoc6-cy8ckit-062s4/libs/TARGET_CY8CKIT-062S4/COMPONENT_CM0P/TOOLCHAIN_IAR/cy8c6xx4_cm0plus.icf

@@ -1,246 +1,246 @@
-/*******************************************************************************
-* \file cy8c6xx4_cm0plus.icf
-* \version 2.91
-*
-* Linker file for the IAR compiler.
-*
-* The main purpose of the linker script is to describe how the sections in the
-* input files should be mapped into the output file, and to control the memory
-* layout of the output file.
-*
-* \note The entry point is fixed and starts at 0x10000000. The valid application
-* image should be placed there.
-*
-* \note The linker files included with the PDL template projects must be generic
-* and handle all common use cases. Your project may not use every section
-* defined in the linker files. In that case you may see warnings during the
-* build process. In your project, you can simply comment out or remove the
-* relevant code in the linker file.
-*
-********************************************************************************
-* \copyright
-* Copyright 2016-2021 Cypress Semiconductor Corporation
-* SPDX-License-Identifier: Apache-2.0
-*
-* Licensed under the Apache License, Version 2.0 (the "License");
-* you may not use this file except in compliance with the License.
-* You may obtain a copy of the License at
-*
-*     http://www.apache.org/licenses/LICENSE-2.0
-*
-* Unless required by applicable law or agreed to in writing, software
-* distributed under the License is distributed on an "AS IS" BASIS,
-* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-* See the License for the specific language governing permissions and
-* limitations under the License.
-*******************************************************************************/
-
-/*###ICF### Section handled by ICF editor, don't touch! ****/
-/*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
-/*-Specials-*/
-define symbol __ICFEDIT_intvec_start__ = 0x00000000;
-
-/*-Sizes-*/
-if (!isdefinedsymbol(__STACK_SIZE)) {
-  define symbol __ICFEDIT_size_cstack__ = 0x1000;
-} else {
-  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
-}
-define symbol __ICFEDIT_size_proc_stack__ = 0x0;
-
-/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
-if (!isdefinedsymbol(__HEAP_SIZE)) {
-    define symbol __ICFEDIT_size_heap__ = 0x0400;
-} else {
-  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
-}
-
-/* The symbols below define the location and size of blocks of memory in the target.
- * Use these symbols to specify the memory regions available for allocation.
- */
-
-/* The following symbols control RAM and flash memory allocation for the CM0+ core.
- * You can change the memory allocation by editing RAM and Flash symbols.
- * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
- * Using this memory region for other purposes will lead to unexpected behavior.
- * Your changes must be aligned with the corresponding symbols for CM4 core in 'xx_cm4_dual.icf',
- * where 'xx' is the device group; for example, 'cy8c6xx7_cm4_dual.icf'.
- */
-/* RAM */
-define symbol __ICFEDIT_region_IRAM1_start__ = 0x08000000;
-define symbol __ICFEDIT_region_IRAM1_end__   = 0x08001FFF;
-
-/* Flash */
-define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
-define symbol __ICFEDIT_region_IROM1_end__   = 0x10001FFF;
-
-/* The following symbols define a 32K flash region used for EEPROM emulation.
- * This region can also be used as the general purpose flash.
- * You can assign sections to this memory region for only one of the cores.
- * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
- * Therefore, repurposing this memory region will prevent such middleware from operation.
- */
-define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
-define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
-
-/* The following symbols define device specific memory regions and must not be changed. */
-/* Supervisory FLASH - User Data */
-define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
-define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
-
-/* Supervisory FLASH - Normal Access Restrictions (NAR) */
-define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
-define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
-
-/* Supervisory FLASH - Public Key */
-define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
-define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
-
-/* Supervisory FLASH - Table of Content # 2 */
-define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
-define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
-
-/* Supervisory FLASH - Table of Content # 2 Copy */
-define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
-define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
-
-/* eFuse */
-define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
-define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
-
-/* XIP */
-define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
-define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
-
-define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
-define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
-
-
-define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
-/**** End of ICF editor section. ###ICF###*/
-
-
-define memory mem with size = 4G;
-define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
-define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
-define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
-define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
-define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
-define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
-define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
-define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
-define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
-define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
-
-/* Public RAM 
- * This is an unprotected public RAM region, with the placed .cy_sharedmem section.
- * This region is used to place objects that require full access from both cores.
- * Uncomment the following lines, define region size, and uncomment the placement of
- * .cy_sharedmem section below in the IRAM2_region. Also define the __ICFEDIT_region_IRAM2_start__
- *  and __ICFEDIT_region_IRAM2_end__ to place the IRAM2_region.
- */
-/*
-define region IRAM2_region = mem:[from __ICFEDIT_region_IRAM2_start__ to __ICFEDIT_region_IRAM2_end__];
-*/
-
-define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
-define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
-define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
-define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
-define block RO     {first section .intvec, readonly};
-
-define block cy_xip { section .cy_xip };
-
-/*-Initializations-*/
-initialize by copy { readwrite };
-do not initialize  { section .noinit, section .intvec_ram };
-
-/*-Placement-*/
-
-/* Flash - Cortex-M0+ application */
-".cy_app_header" : place at start of IROM1_region  { section .cy_app_header };
-place in          IROM1_region  { block RO };
-
-
-/* Supervisory Flash - User Data */
-".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
-
-/* Supervisory Flash - NAR */
-".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
-
-/* Supervisory Flash - Public Key */
-".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
-
-/* Supervisory Flash - TOC2 */
-".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
-
-/* Supervisory Flash - RTOC2 */
-".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
-
-/* eFuse */
-".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
-
-/* Execute in Place (XIP). See the smif driver documentation for details. */
-"cy_xip" : place at start of EROM1_region  { block cy_xip };
-
-/* RAM */
-place at start of IRAM1_region  { readwrite section .intvec_ram};
-place in          IRAM1_region  { readwrite };
-place at end   of IRAM1_region  { block HSTACK };
-
-/* Public RAM 
- *To use unprotected public RAM, uncomment the following .cy_sharedmem section placement.
- */
-/*
-place at start of IRAM2_region  { section .cy_sharedmem };
-*/
-
-/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
-".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
-
-
-keep {  section .cy_app_header,
-        section .cy_sflash_user_data,
-        section .cy_sflash_nar,
-        section .cy_sflash_public_key,
-        section .cy_toc_part2,
-        section .cy_rtoc_part2,
-        section .cy_efuse,
-        section .cy_xip,
-        section .cymeta,
-         };
-
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-define exported symbol __cy_memory_0_start    = 0x10000000;
-define exported symbol __cy_memory_0_length   = 0x00040000;
-define exported symbol __cy_memory_0_row_size = 0x200;
-
-
-/* Supervisory Flash */
-define exported symbol __cy_memory_2_start    = 0x16000000;
-define exported symbol __cy_memory_2_length   = 0x8000;
-define exported symbol __cy_memory_2_row_size = 0x200;
-
-/* XIP */
-define exported symbol __cy_memory_3_start    = 0x18000000;
-define exported symbol __cy_memory_3_length   = 0x08000000;
-define exported symbol __cy_memory_3_row_size = 0x200;
-
-/* eFuse */
-define exported symbol __cy_memory_4_start    = 0x90700000;
-define exported symbol __cy_memory_4_length   = 0x100000;
-define exported symbol __cy_memory_4_row_size = 1;
-
-/* EOF */
+/*******************************************************************************
+* \file cy8c6xx4_cm0plus.icf
+* \version 2.91
+*
+* Linker file for the IAR compiler.
+*
+* The main purpose of the linker script is to describe how the sections in the
+* input files should be mapped into the output file, and to control the memory
+* layout of the output file.
+*
+* \note The entry point is fixed and starts at 0x10000000. The valid application
+* image should be placed there.
+*
+* \note The linker files included with the PDL template projects must be generic
+* and handle all common use cases. Your project may not use every section
+* defined in the linker files. In that case you may see warnings during the
+* build process. In your project, you can simply comment out or remove the
+* relevant code in the linker file.
+*
+********************************************************************************
+* \copyright
+* Copyright 2016-2021 Cypress Semiconductor Corporation
+* SPDX-License-Identifier: Apache-2.0
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*******************************************************************************/
+
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+
+/*-Sizes-*/
+if (!isdefinedsymbol(__STACK_SIZE)) {
+  define symbol __ICFEDIT_size_cstack__ = 0x1000;
+} else {
+  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
+}
+define symbol __ICFEDIT_size_proc_stack__ = 0x0;
+
+/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
+if (!isdefinedsymbol(__HEAP_SIZE)) {
+    define symbol __ICFEDIT_size_heap__ = 0x0400;
+} else {
+  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
+}
+
+/* The symbols below define the location and size of blocks of memory in the target.
+ * Use these symbols to specify the memory regions available for allocation.
+ */
+
+/* The following symbols control RAM and flash memory allocation for the CM0+ core.
+ * You can change the memory allocation by editing RAM and Flash symbols.
+ * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+ * Using this memory region for other purposes will lead to unexpected behavior.
+ * Your changes must be aligned with the corresponding symbols for CM4 core in 'xx_cm4_dual.icf',
+ * where 'xx' is the device group; for example, 'cy8c6xx7_cm4_dual.icf'.
+ */
+/* RAM */
+define symbol __ICFEDIT_region_IRAM1_start__ = 0x08000000;
+define symbol __ICFEDIT_region_IRAM1_end__   = 0x08001FFF;
+
+/* Flash */
+define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
+define symbol __ICFEDIT_region_IROM1_end__   = 0x10001FFF;
+
+/* The following symbols define a 32K flash region used for EEPROM emulation.
+ * This region can also be used as the general purpose flash.
+ * You can assign sections to this memory region for only one of the cores.
+ * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
+ * Therefore, repurposing this memory region will prevent such middleware from operation.
+ */
+define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
+define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
+
+/* The following symbols define device specific memory regions and must not be changed. */
+/* Supervisory FLASH - User Data */
+define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
+define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
+
+/* Supervisory FLASH - Normal Access Restrictions (NAR) */
+define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
+define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
+
+/* Supervisory FLASH - Public Key */
+define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
+define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
+
+/* Supervisory FLASH - Table of Content # 2 */
+define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
+define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
+
+/* Supervisory FLASH - Table of Content # 2 Copy */
+define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
+define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
+
+/* eFuse */
+define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
+define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
+
+/* XIP */
+define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
+define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
+
+define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
+define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
+
+
+define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
+define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
+define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
+define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
+define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
+define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
+define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
+define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
+define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
+define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
+
+/* Public RAM
+ * This is an unprotected public RAM region, with the placed .cy_sharedmem section.
+ * This region is used to place objects that require full access from both cores.
+ * Uncomment the following lines, define region size, and uncomment the placement of
+ * .cy_sharedmem section below in the IRAM2_region. Also define the __ICFEDIT_region_IRAM2_start__
+ *  and __ICFEDIT_region_IRAM2_end__ to place the IRAM2_region.
+ */
+/*
+define region IRAM2_region = mem:[from __ICFEDIT_region_IRAM2_start__ to __ICFEDIT_region_IRAM2_end__];
+*/
+
+define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
+define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
+define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
+define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
+define block RO     {first section .intvec, readonly};
+
+define block cy_xip { section .cy_xip };
+
+/*-Initializations-*/
+initialize by copy { readwrite };
+do not initialize  { section .noinit, section .intvec_ram };
+
+/*-Placement-*/
+
+/* Flash - Cortex-M0+ application */
+".cy_app_header" : place at start of IROM1_region  { section .cy_app_header };
+place in          IROM1_region  { block RO };
+
+
+/* Supervisory Flash - User Data */
+".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
+
+/* Supervisory Flash - NAR */
+".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
+
+/* Supervisory Flash - Public Key */
+".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
+
+/* Supervisory Flash - TOC2 */
+".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
+
+/* Supervisory Flash - RTOC2 */
+".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
+
+/* eFuse */
+".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
+
+/* Execute in Place (XIP). See the smif driver documentation for details. */
+"cy_xip" : place at start of EROM1_region  { block cy_xip };
+
+/* RAM */
+place at start of IRAM1_region  { readwrite section .intvec_ram};
+place in          IRAM1_region  { readwrite };
+place at end   of IRAM1_region  { block HSTACK };
+
+/* Public RAM
+ *To use unprotected public RAM, uncomment the following .cy_sharedmem section placement.
+ */
+/*
+place at start of IRAM2_region  { section .cy_sharedmem };
+*/
+
+/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
+".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
+
+
+keep {  section .cy_app_header,
+        section .cy_sflash_user_data,
+        section .cy_sflash_nar,
+        section .cy_sflash_public_key,
+        section .cy_toc_part2,
+        section .cy_rtoc_part2,
+        section .cy_efuse,
+        section .cy_xip,
+        section .cymeta,
+         };
+
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+define exported symbol __cy_memory_0_start    = 0x10000000;
+define exported symbol __cy_memory_0_length   = 0x00040000;
+define exported symbol __cy_memory_0_row_size = 0x200;
+
+
+/* Supervisory Flash */
+define exported symbol __cy_memory_2_start    = 0x16000000;
+define exported symbol __cy_memory_2_length   = 0x8000;
+define exported symbol __cy_memory_2_row_size = 0x200;
+
+/* XIP */
+define exported symbol __cy_memory_3_start    = 0x18000000;
+define exported symbol __cy_memory_3_length   = 0x08000000;
+define exported symbol __cy_memory_3_row_size = 0x200;
+
+/* eFuse */
+define exported symbol __cy_memory_4_start    = 0x90700000;
+define exported symbol __cy_memory_4_length   = 0x100000;
+define exported symbol __cy_memory_4_row_size = 1;
+
+/* EOF */

bsp/Infineon/psoc6-cy8ckit-062s4/libs/TARGET_CY8CKIT-062S4/COMPONENT_CM4/TOOLCHAIN_ARM/cy8c6xx4_cm4_dual.sct

@@ -1,258 +1,258 @@
-#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m4
-; The first line specifies a preprocessor command that the linker invokes
-; to pass a scatter file through a C preprocessor.
-
-;*******************************************************************************
-;* \file cy8c6xx4_cm4_dual.sct
-;* \version 2.91
-;*
-;* Linker file for the ARMCC.
-;*
-;* The main purpose of the linker script is to describe how the sections in the
-;* input files should be mapped into the output file, and to control the memory
-;* layout of the output file.
-;*
-;* \note The entry point location is fixed and starts at 0x10000000. The valid
-;* application image should be placed there.
-;*
-;* \note The linker files included with the PDL template projects must be
-;* generic and handle all common use cases. Your project may not use every
-;* section defined in the linker files. In that case you may see the warnings
-;* during the build process: L6314W (no section matches pattern) and/or L6329W
-;* (pattern only matches removed unused sections). In your project, you can
-;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
-;* the linker, simply comment out or remove the relevant code in the linker
-;* file.
-;*
-;*******************************************************************************
-;* \copyright
-;* Copyright 2016-2021 Cypress Semiconductor Corporation
-;* SPDX-License-Identifier: Apache-2.0
-;*
-;* Licensed under the Apache License, Version 2.0 (the "License");
-;* you may not use this file except in compliance with the License.
-;* You may obtain a copy of the License at
-;*
-;*     http://www.apache.org/licenses/LICENSE-2.0
-;*
-;* Unless required by applicable law or agreed to in writing, software
-;* distributed under the License is distributed on an "AS IS" BASIS,
-;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-;* See the License for the specific language governing permissions and
-;* limitations under the License.
-;******************************************************************************/
-
-; The defines below describe the location and size of blocks of memory in the target.
-; Use these defines to specify the memory regions available for allocation.
-
-; The following defines control RAM and flash memory allocation for the CM4 core.
-; You can change the memory allocation by editing RAM and Flash defines.
-; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
-; Using this memory region for other purposes will lead to unexpected behavior.
-; Your changes must be aligned with the corresponding defines for CM0+ core in 'xx_cm0plus.scat',
-; where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.scat'.
-; RAM
-#define RAM_START               0x08002000
-#define RAM_SIZE                0x0001D800
-; Flash
-#define FLASH_START             0x10000000
-#define FLASH_SIZE              0x00040000
-
-; The size of the stack section at the end of CM4 SRAM
-#define STACK_SIZE              0x00001000
-
-; By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
-; More about CM0+ prebuilt images, see here:
-; https://github.com/cypresssemiconductorco/psoc6cm0p
-; The size of the Cortex-M0+ application flash image
-#define FLASH_CM0P_SIZE         0x2000
-
-
-; The following defines describe device specific memory regions and must not be changed.
-; Supervisory flash: User data
-#define SFLASH_USER_DATA_START  0x16000800
-#define SFLASH_USER_DATA_SIZE   0x00000800
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-#define SFLASH_NAR_START        0x16001A00
-#define SFLASH_NAR_SIZE         0x00000200
-
-; Supervisory flash: Public Key
-#define SFLASH_PUBLIC_KEY_START 0x16005A00
-#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
-
-; Supervisory flash: Table of Content # 2
-#define SFLASH_TOC_2_START      0x16007C00
-#define SFLASH_TOC_2_SIZE       0x00000200
-
-; Supervisory flash: Table of Content # 2 Copy
-#define SFLASH_RTOC_2_START     0x16007E00
-#define SFLASH_RTOC_2_SIZE      0x00000200
-
-; External memory
-#define XIP_START               0x18000000
-#define XIP_SIZE                0x08000000
-
-; eFuse
-#define EFUSE_START             0x90700000
-#define EFUSE_SIZE              0x100000
-
-
-; Cortex-M0+ application flash image area
-LR_IROM FLASH_START FLASH_CM0P_SIZE
-{
-    .cy_m0p_image +0 FLASH_CM0P_SIZE
-    {
-        * (.cy_m0p_image)
-    }
-}
-
-; Cortex-M4 application flash area
-LR_IROM1 (FLASH_START + FLASH_CM0P_SIZE) (FLASH_SIZE - FLASH_CM0P_SIZE)
-{
-    ER_FLASH_VECTORS +0
-    {
-        * (RESET, +FIRST)
-    }
-
-    ER_FLASH_CODE +0 FIXED
-    {
-        * (InRoot$$Sections)
-        * (+RO)
-    }
-
-    ER_RAM_VECTORS RAM_START UNINIT
-    {
-        * (RESET_RAM, +FIRST)
-    }
-
-    RW_RAM_DATA +0
-    {
-        * (.cy_ramfunc)
-        * (+RW, +ZI)
-    }
-
-    ; Place variables in the section that should not be initialized during the
-    ; device startup.
-    RW_IRAM1 +0 UNINIT
-    {
-        * (.noinit)
-    }
-
-    ; Application heap area (HEAP)
-    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
-    { 
-    }
-
-    ; Stack region growing down
-    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
-    {
-    }
-
-    ; Used for the digital signature of the secure application and the
-    ; Bootloader SDK application. The size of the section depends on the required
-    ; data size.
-    .cy_app_signature (FLASH_START + FLASH_SIZE - 256) 256
-    {
-        * (.cy_app_signature)
-    }
-}
-
-
-
-; Supervisory flash: User data
-LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
-{
-    .cy_sflash_user_data +0
-    {
-        * (.cy_sflash_user_data)
-    }
-}
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
-{
-    .cy_sflash_nar +0
-    {
-        * (.cy_sflash_nar)
-    }
-}
-
-; Supervisory flash: Public Key
-LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
-{
-    .cy_sflash_public_key +0
-    {
-        * (.cy_sflash_public_key)
-    }
-}
-
-; Supervisory flash: Table of Content # 2
-LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
-{
-    .cy_toc_part2 +0
-    {
-        * (.cy_toc_part2)
-    }
-}
-
-; Supervisory flash: Table of Content # 2 Copy
-LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
-{
-    .cy_rtoc_part2 +0
-    {
-        * (.cy_rtoc_part2)
-    }
-}
-
-
-; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
-LR_EROM XIP_START XIP_SIZE
-{
-    cy_xip +0
-    {
-        * (.cy_xip)
-    }
-}
-
-
-; eFuse
-LR_EFUSE EFUSE_START EFUSE_SIZE
-{
-    .cy_efuse +0
-    {
-        * (.cy_efuse)
-    }
-}
-
-
-; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
-CYMETA 0x90500000
-{
-    .cymeta +0 { * (.cymeta) }
-}
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-#define __cy_memory_0_start 0x10000000
-#define __cy_memory_0_length  0x00040000
-#define __cy_memory_0_row_size 0x200
-
-
-/* Supervisory Flash */
-#define __cy_memory_2_start    0x16000000
-#define __cy_memory_2_length   0x8000
-#define __cy_memory_2_row_size 0x200
-
-/* XIP */
-#define __cy_memory_3_start    0x18000000
-#define __cy_memory_3_length   0x08000000
-#define __cy_memory_3_row_size 0x200
-
-/* eFuse */
-#define __cy_memory_4_start    0x90700000
-#define __cy_memory_4_length   0x100000
-#define __cy_memory_4_row_size 1
-
-
-/* [] END OF FILE */
+#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m4
+; The first line specifies a preprocessor command that the linker invokes
+; to pass a scatter file through a C preprocessor.
+
+;*******************************************************************************
+;* \file cy8c6xx4_cm4_dual.sct
+;* \version 2.91
+;*
+;* Linker file for the ARMCC.
+;*
+;* The main purpose of the linker script is to describe how the sections in the
+;* input files should be mapped into the output file, and to control the memory
+;* layout of the output file.
+;*
+;* \note The entry point location is fixed and starts at 0x10000000. The valid
+;* application image should be placed there.
+;*
+;* \note The linker files included with the PDL template projects must be
+;* generic and handle all common use cases. Your project may not use every
+;* section defined in the linker files. In that case you may see the warnings
+;* during the build process: L6314W (no section matches pattern) and/or L6329W
+;* (pattern only matches removed unused sections). In your project, you can
+;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
+;* the linker, simply comment out or remove the relevant code in the linker
+;* file.
+;*
+;*******************************************************************************
+;* \copyright
+;* Copyright 2016-2021 Cypress Semiconductor Corporation
+;* SPDX-License-Identifier: Apache-2.0
+;*
+;* Licensed under the Apache License, Version 2.0 (the "License");
+;* you may not use this file except in compliance with the License.
+;* You may obtain a copy of the License at
+;*
+;*     http://www.apache.org/licenses/LICENSE-2.0
+;*
+;* Unless required by applicable law or agreed to in writing, software
+;* distributed under the License is distributed on an "AS IS" BASIS,
+;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+;* See the License for the specific language governing permissions and
+;* limitations under the License.
+;******************************************************************************/
+
+; The defines below describe the location and size of blocks of memory in the target.
+; Use these defines to specify the memory regions available for allocation.
+
+; The following defines control RAM and flash memory allocation for the CM4 core.
+; You can change the memory allocation by editing RAM and Flash defines.
+; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+; Using this memory region for other purposes will lead to unexpected behavior.
+; Your changes must be aligned with the corresponding defines for CM0+ core in 'xx_cm0plus.scat',
+; where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.scat'.
+; RAM
+#define RAM_START               0x08002000
+#define RAM_SIZE                0x0001D800
+; Flash
+#define FLASH_START             0x10000000
+#define FLASH_SIZE              0x00040000
+
+; The size of the stack section at the end of CM4 SRAM
+#define STACK_SIZE              0x00001000
+
+; By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
+; More about CM0+ prebuilt images, see here:
+; https://github.com/cypresssemiconductorco/psoc6cm0p
+; The size of the Cortex-M0+ application flash image
+#define FLASH_CM0P_SIZE         0x2000
+
+
+; The following defines describe device specific memory regions and must not be changed.
+; Supervisory flash: User data
+#define SFLASH_USER_DATA_START  0x16000800
+#define SFLASH_USER_DATA_SIZE   0x00000800
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+#define SFLASH_NAR_START        0x16001A00
+#define SFLASH_NAR_SIZE         0x00000200
+
+; Supervisory flash: Public Key
+#define SFLASH_PUBLIC_KEY_START 0x16005A00
+#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
+
+; Supervisory flash: Table of Content # 2
+#define SFLASH_TOC_2_START      0x16007C00
+#define SFLASH_TOC_2_SIZE       0x00000200
+
+; Supervisory flash: Table of Content # 2 Copy
+#define SFLASH_RTOC_2_START     0x16007E00
+#define SFLASH_RTOC_2_SIZE      0x00000200
+
+; External memory
+#define XIP_START               0x18000000
+#define XIP_SIZE                0x08000000
+
+; eFuse
+#define EFUSE_START             0x90700000
+#define EFUSE_SIZE              0x100000
+
+
+; Cortex-M0+ application flash image area
+LR_IROM FLASH_START FLASH_CM0P_SIZE
+{
+    .cy_m0p_image +0 FLASH_CM0P_SIZE
+    {
+        * (.cy_m0p_image)
+    }
+}
+
+; Cortex-M4 application flash area
+LR_IROM1 (FLASH_START + FLASH_CM0P_SIZE) (FLASH_SIZE - FLASH_CM0P_SIZE)
+{
+    ER_FLASH_VECTORS +0
+    {
+        * (RESET, +FIRST)
+    }
+
+    ER_FLASH_CODE +0 FIXED
+    {
+        * (InRoot$$Sections)
+        * (+RO)
+    }
+
+    ER_RAM_VECTORS RAM_START UNINIT
+    {
+        * (RESET_RAM, +FIRST)
+    }
+
+    RW_RAM_DATA +0
+    {
+        * (.cy_ramfunc)
+        * (+RW, +ZI)
+    }
+
+    ; Place variables in the section that should not be initialized during the
+    ; device startup.
+    RW_IRAM1 +0 UNINIT
+    {
+        * (.noinit)
+    }
+
+    ; Application heap area (HEAP)
+    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
+    {
+    }
+
+    ; Stack region growing down
+    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
+    {
+    }
+
+    ; Used for the digital signature of the secure application and the
+    ; Bootloader SDK application. The size of the section depends on the required
+    ; data size.
+    .cy_app_signature (FLASH_START + FLASH_SIZE - 256) 256
+    {
+        * (.cy_app_signature)
+    }
+}
+
+
+
+; Supervisory flash: User data
+LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
+{
+    .cy_sflash_user_data +0
+    {
+        * (.cy_sflash_user_data)
+    }
+}
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
+{
+    .cy_sflash_nar +0
+    {
+        * (.cy_sflash_nar)
+    }
+}
+
+; Supervisory flash: Public Key
+LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
+{
+    .cy_sflash_public_key +0
+    {
+        * (.cy_sflash_public_key)
+    }
+}
+
+; Supervisory flash: Table of Content # 2
+LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
+{
+    .cy_toc_part2 +0
+    {
+        * (.cy_toc_part2)
+    }
+}
+
+; Supervisory flash: Table of Content # 2 Copy
+LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
+{
+    .cy_rtoc_part2 +0
+    {
+        * (.cy_rtoc_part2)
+    }
+}
+
+
+; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
+LR_EROM XIP_START XIP_SIZE
+{
+    cy_xip +0
+    {
+        * (.cy_xip)
+    }
+}
+
+
+; eFuse
+LR_EFUSE EFUSE_START EFUSE_SIZE
+{
+    .cy_efuse +0
+    {
+        * (.cy_efuse)
+    }
+}
+
+
+; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
+CYMETA 0x90500000
+{
+    .cymeta +0 { * (.cymeta) }
+}
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+#define __cy_memory_0_start 0x10000000
+#define __cy_memory_0_length  0x00040000
+#define __cy_memory_0_row_size 0x200
+
+
+/* Supervisory Flash */
+#define __cy_memory_2_start    0x16000000
+#define __cy_memory_2_length   0x8000
+#define __cy_memory_2_row_size 0x200
+
+/* XIP */
+#define __cy_memory_3_start    0x18000000
+#define __cy_memory_3_length   0x08000000
+#define __cy_memory_3_row_size 0x200
+
+/* eFuse */
+#define __cy_memory_4_start    0x90700000
+#define __cy_memory_4_length   0x100000
+#define __cy_memory_4_row_size 1
+
+
+/* [] END OF FILE */

bsp/Infineon/psoc6-cy8ckit-062s4/libs/TARGET_CY8CKIT-062S4/COMPONENT_CM4/TOOLCHAIN_IAR/cy8c6xx4_cm4_dual.icf

@@ -1,240 +1,240 @@
-/*******************************************************************************
-* \file cy8c6xx4_cm4_dual.icf
-* \version 2.91
-*
-* Linker file for the IAR compiler.
-*
-* The main purpose of the linker script is to describe how the sections in the
-* input files should be mapped into the output file, and to control the memory
-* layout of the output file.
-*
-* \note The entry point is fixed and starts at 0x10000000. The valid application
-* image should be placed there.
-*
-* \note The linker files included with the PDL template projects must be generic
-* and handle all common use cases. Your project may not use every section
-* defined in the linker files. In that case you may see warnings during the
-* build process. In your project, you can simply comment out or remove the
-* relevant code in the linker file.
-*
-********************************************************************************
-* \copyright
-* Copyright 2016-2021 Cypress Semiconductor Corporation
-* SPDX-License-Identifier: Apache-2.0
-*
-* Licensed under the Apache License, Version 2.0 (the "License");
-* you may not use this file except in compliance with the License.
-* You may obtain a copy of the License at
-*
-*     http://www.apache.org/licenses/LICENSE-2.0
-*
-* Unless required by applicable law or agreed to in writing, software
-* distributed under the License is distributed on an "AS IS" BASIS,
-* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-* See the License for the specific language governing permissions and
-* limitations under the License.
-*******************************************************************************/
-
-/*###ICF### Section handled by ICF editor, don't touch! ****/
-/*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
-/*-Specials-*/
-define symbol __ICFEDIT_intvec_start__ = 0x00000000;
-
-/* The symbols below define the location and size of blocks of memory in the target.
- * Use these symbols to specify the memory regions available for allocation.
- */
-
-/* The following symbols control RAM and flash memory allocation for the CM4 core.
- * You can change the memory allocation by editing RAM and Flash symbols.
- * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
- * Using this memory region for other purposes will lead to unexpected behavior.
- * Your changes must be aligned with the corresponding symbols for CM0+ core in 'xx_cm0plus.icf',
- * where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.icf'.
- */
-/* RAM */
-define symbol __ICFEDIT_region_IRAM1_start__ = 0x08002000;
-define symbol __ICFEDIT_region_IRAM1_end__   = 0x0801F7FF;
-
-/* Flash */
-define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
-define symbol __ICFEDIT_region_IROM1_end__   = 0x1003FFFF;
-
-/* The following symbols define a 32K flash region used for EEPROM emulation.
- * This region can also be used as the general purpose flash.
- * You can assign sections to this memory region for only one of the cores.
- * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
- * Therefore, repurposing this memory region will prevent such middleware from operation.
- */
-define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
-define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
-
-/* The following symbols define device specific memory regions and must not be changed. */
-/* Supervisory FLASH - User Data */
-define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
-define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
-
-/* Supervisory FLASH - Normal Access Restrictions (NAR) */
-define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
-define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
-
-/* Supervisory FLASH - Public Key */
-define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
-define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
-
-/* Supervisory FLASH - Table of Content # 2 */
-define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
-define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
-
-/* Supervisory FLASH - Table of Content # 2 Copy */
-define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
-define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
-
-/* eFuse */
-define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
-define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
-
-/* XIP */
-define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
-define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
-
-define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
-define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
-
-
-define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
-/*-Sizes-*/
-if (!isdefinedsymbol(__STACK_SIZE)) {
-  define symbol __ICFEDIT_size_cstack__ = 0x1000;
-} else {
-  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
-}
-define symbol __ICFEDIT_size_proc_stack__ = 0x0;
-
-/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
-if (!isdefinedsymbol(__HEAP_SIZE)) {
-    define symbol __ICFEDIT_size_heap__ = 0x0400;
-} else {
-  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
-}
-/**** End of ICF editor section. ###ICF###*/
-
-/* By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
- * More about CM0+ prebuilt images, see here:
- * https://github.com/cypresssemiconductorco/psoc6cm0p
- */
-/* The size of the Cortex-M0+ application image */
-define symbol FLASH_CM0P_SIZE  = 0x2000;
-
-define memory mem with size = 4G;
-define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
-define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
-define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
-define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
-define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
-define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
-define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
-define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
-define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
-define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
-
-define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
-define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
-define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
-define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
-define block CM0P_RO with size = FLASH_CM0P_SIZE  { readonly section .cy_m0p_image };
-define block RO     {first section .intvec, readonly};
-
-define block cy_xip { section .cy_xip };
-
-/*-Initializations-*/
-initialize by copy { readwrite };
-do not initialize  { section .noinit, section .intvec_ram };
-
-/*-Placement-*/
-
-/* Flash - Cortex-M0+ application image */
-place at start of IROM1_region  { block CM0P_RO };
-
-/* Flash - Cortex-M4 application */
-place in          IROM1_region  { block RO };
-
-/* Used for the digital signature of the secure application and the Bootloader SDK application. */
-".cy_app_signature" : place at address (__ICFEDIT_region_IROM1_end__ - 0x200) { section .cy_app_signature };
-
-
-/* Supervisory Flash - User Data */
-".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
-
-/* Supervisory Flash - NAR */
-".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
-
-/* Supervisory Flash - Public Key */
-".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
-
-/* Supervisory Flash - TOC2 */
-".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
-
-/* Supervisory Flash - RTOC2 */
-".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
-
-/* eFuse */
-".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
-
-/* Execute in Place (XIP). See the smif driver documentation for details. */
-"cy_xip" : place at start of EROM1_region  { block cy_xip };
-
-/* RAM */
-place at start of IRAM1_region  { readwrite section .intvec_ram};
-place in          IRAM1_region  { readwrite };
-place at end   of IRAM1_region  { block HSTACK };
-
-/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
-".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
-
-
-keep {  section .cy_m0p_image,
-        section .cy_app_signature,
-        section .cy_sflash_user_data,
-        section .cy_sflash_nar,
-        section .cy_sflash_public_key,
-        section .cy_toc_part2,
-        section .cy_rtoc_part2,
-        section .cy_efuse,
-        section .cy_xip,
-        section .cymeta,
-         };
-
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-define exported symbol __cy_memory_0_start    = 0x10000000;
-define exported symbol __cy_memory_0_length   = 0x00040000;
-define exported symbol __cy_memory_0_row_size = 0x200;
-
-
-/* Supervisory Flash */
-define exported symbol __cy_memory_2_start    = 0x16000000;
-define exported symbol __cy_memory_2_length   = 0x8000;
-define exported symbol __cy_memory_2_row_size = 0x200;
-
-/* XIP */
-define exported symbol __cy_memory_3_start    = 0x18000000;
-define exported symbol __cy_memory_3_length   = 0x08000000;
-define exported symbol __cy_memory_3_row_size = 0x200;
-
-/* eFuse */
-define exported symbol __cy_memory_4_start    = 0x90700000;
-define exported symbol __cy_memory_4_length   = 0x100000;
-define exported symbol __cy_memory_4_row_size = 1;
-
-/* EOF */
+/*******************************************************************************
+* \file cy8c6xx4_cm4_dual.icf
+* \version 2.91
+*
+* Linker file for the IAR compiler.
+*
+* The main purpose of the linker script is to describe how the sections in the
+* input files should be mapped into the output file, and to control the memory
+* layout of the output file.
+*
+* \note The entry point is fixed and starts at 0x10000000. The valid application
+* image should be placed there.
+*
+* \note The linker files included with the PDL template projects must be generic
+* and handle all common use cases. Your project may not use every section
+* defined in the linker files. In that case you may see warnings during the
+* build process. In your project, you can simply comment out or remove the
+* relevant code in the linker file.
+*
+********************************************************************************
+* \copyright
+* Copyright 2016-2021 Cypress Semiconductor Corporation
+* SPDX-License-Identifier: Apache-2.0
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*******************************************************************************/
+
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+
+/* The symbols below define the location and size of blocks of memory in the target.
+ * Use these symbols to specify the memory regions available for allocation.
+ */
+
+/* The following symbols control RAM and flash memory allocation for the CM4 core.
+ * You can change the memory allocation by editing RAM and Flash symbols.
+ * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+ * Using this memory region for other purposes will lead to unexpected behavior.
+ * Your changes must be aligned with the corresponding symbols for CM0+ core in 'xx_cm0plus.icf',
+ * where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.icf'.
+ */
+/* RAM */
+define symbol __ICFEDIT_region_IRAM1_start__ = 0x08002000;
+define symbol __ICFEDIT_region_IRAM1_end__   = 0x0801F7FF;
+
+/* Flash */
+define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
+define symbol __ICFEDIT_region_IROM1_end__   = 0x1003FFFF;
+
+/* The following symbols define a 32K flash region used for EEPROM emulation.
+ * This region can also be used as the general purpose flash.
+ * You can assign sections to this memory region for only one of the cores.
+ * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
+ * Therefore, repurposing this memory region will prevent such middleware from operation.
+ */
+define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
+define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
+
+/* The following symbols define device specific memory regions and must not be changed. */
+/* Supervisory FLASH - User Data */
+define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
+define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
+
+/* Supervisory FLASH - Normal Access Restrictions (NAR) */
+define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
+define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
+
+/* Supervisory FLASH - Public Key */
+define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
+define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
+
+/* Supervisory FLASH - Table of Content # 2 */
+define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
+define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
+
+/* Supervisory FLASH - Table of Content # 2 Copy */
+define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
+define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
+
+/* eFuse */
+define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
+define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
+
+/* XIP */
+define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
+define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
+
+define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
+define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
+
+
+define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
+/*-Sizes-*/
+if (!isdefinedsymbol(__STACK_SIZE)) {
+  define symbol __ICFEDIT_size_cstack__ = 0x1000;
+} else {
+  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
+}
+define symbol __ICFEDIT_size_proc_stack__ = 0x0;
+
+/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
+if (!isdefinedsymbol(__HEAP_SIZE)) {
+    define symbol __ICFEDIT_size_heap__ = 0x0400;
+} else {
+  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
+}
+/**** End of ICF editor section. ###ICF###*/
+
+/* By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
+ * More about CM0+ prebuilt images, see here:
+ * https://github.com/cypresssemiconductorco/psoc6cm0p
+ */
+/* The size of the Cortex-M0+ application image */
+define symbol FLASH_CM0P_SIZE  = 0x2000;
+
+define memory mem with size = 4G;
+define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
+define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
+define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
+define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
+define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
+define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
+define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
+define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
+define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
+define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
+
+define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
+define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
+define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
+define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
+define block CM0P_RO with size = FLASH_CM0P_SIZE  { readonly section .cy_m0p_image };
+define block RO     {first section .intvec, readonly};
+
+define block cy_xip { section .cy_xip };
+
+/*-Initializations-*/
+initialize by copy { readwrite };
+do not initialize  { section .noinit, section .intvec_ram };
+
+/*-Placement-*/
+
+/* Flash - Cortex-M0+ application image */
+place at start of IROM1_region  { block CM0P_RO };
+
+/* Flash - Cortex-M4 application */
+place in          IROM1_region  { block RO };
+
+/* Used for the digital signature of the secure application and the Bootloader SDK application. */
+".cy_app_signature" : place at address (__ICFEDIT_region_IROM1_end__ - 0x200) { section .cy_app_signature };
+
+
+/* Supervisory Flash - User Data */
+".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
+
+/* Supervisory Flash - NAR */
+".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
+
+/* Supervisory Flash - Public Key */
+".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
+
+/* Supervisory Flash - TOC2 */
+".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
+
+/* Supervisory Flash - RTOC2 */
+".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
+
+/* eFuse */
+".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
+
+/* Execute in Place (XIP). See the smif driver documentation for details. */
+"cy_xip" : place at start of EROM1_region  { block cy_xip };
+
+/* RAM */
+place at start of IRAM1_region  { readwrite section .intvec_ram};
+place in          IRAM1_region  { readwrite };
+place at end   of IRAM1_region  { block HSTACK };
+
+/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
+".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
+
+
+keep {  section .cy_m0p_image,
+        section .cy_app_signature,
+        section .cy_sflash_user_data,
+        section .cy_sflash_nar,
+        section .cy_sflash_public_key,
+        section .cy_toc_part2,
+        section .cy_rtoc_part2,
+        section .cy_efuse,
+        section .cy_xip,
+        section .cymeta,
+         };
+
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+define exported symbol __cy_memory_0_start    = 0x10000000;
+define exported symbol __cy_memory_0_length   = 0x00040000;
+define exported symbol __cy_memory_0_row_size = 0x200;
+
+
+/* Supervisory Flash */
+define exported symbol __cy_memory_2_start    = 0x16000000;
+define exported symbol __cy_memory_2_length   = 0x8000;
+define exported symbol __cy_memory_2_row_size = 0x200;
+
+/* XIP */
+define exported symbol __cy_memory_3_start    = 0x18000000;
+define exported symbol __cy_memory_3_length   = 0x08000000;
+define exported symbol __cy_memory_3_row_size = 0x200;
+
+/* eFuse */
+define exported symbol __cy_memory_4_start    = 0x90700000;
+define exported symbol __cy_memory_4_length   = 0x100000;
+define exported symbol __cy_memory_4_row_size = 1;
+
+/* EOF */

bsp/Infineon/psoc6-cy8cproto-062S3-4343W/board/linker_scripts/link.icf

@@ -1,247 +1,247 @@
-/*******************************************************************************
-* \file cy8c6xx5_cm4_dual.icf
-* \version 2.91
-*
-* Linker file for the IAR compiler.
-*
-* The main purpose of the linker script is to describe how the sections in the
-* input files should be mapped into the output file, and to control the memory
-* layout of the output file.
-*
-* \note The entry point is fixed and starts at 0x10000000. The valid application
-* image should be placed there.
-*
-* \note The linker files included with the PDL template projects must be generic
-* and handle all common use cases. Your project may not use every section
-* defined in the linker files. In that case you may see warnings during the
-* build process. In your project, you can simply comment out or remove the
-* relevant code in the linker file.
-*
-********************************************************************************
-* \copyright
-* Copyright 2016-2021 Cypress Semiconductor Corporation
-* SPDX-License-Identifier: Apache-2.0
-*
-* Licensed under the Apache License, Version 2.0 (the "License");
-* you may not use this file except in compliance with the License.
-* You may obtain a copy of the License at
-*
-*     http://www.apache.org/licenses/LICENSE-2.0
-*
-* Unless required by applicable law or agreed to in writing, software
-* distributed under the License is distributed on an "AS IS" BASIS,
-* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-* See the License for the specific language governing permissions and
-* limitations under the License.
-*******************************************************************************/
-
-/*###ICF### Section handled by ICF editor, don't touch! ****/
-/*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
-/*-Specials-*/
-define symbol __ICFEDIT_intvec_start__ = 0x00000000;
-
-/* The symbols below define the location and size of blocks of memory in the target.
- * Use these symbols to specify the memory regions available for allocation.
- */
-
-/* The following symbols control RAM and flash memory allocation for the CM4 core.
- * You can change the memory allocation by editing RAM and Flash symbols.
- * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
- * Using this memory region for other purposes will lead to unexpected behavior.
- * Your changes must be aligned with the corresponding symbols for CM0+ core in 'xx_cm0plus.icf',
- * where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.icf'.
- */
-/* RAM */
-define symbol __ICFEDIT_region_IRAM1_start__ = 0x08002000;
-define symbol __ICFEDIT_region_IRAM1_end__   = 0x0803F7FF;
-
-/* Flash */
-define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
-define symbol __ICFEDIT_region_IROM1_end__   = 0x1007FFFF;
-
-/* The following symbols define a 32K flash region used for EEPROM emulation.
- * This region can also be used as the general purpose flash.
- * You can assign sections to this memory region for only one of the cores.
- * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
- * Therefore, repurposing this memory region will prevent such middleware from operation.
- */
-define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
-define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
-
-/* The following symbols define device specific memory regions and must not be changed. */
-/* Supervisory FLASH - User Data */
-define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
-define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
-
-/* Supervisory FLASH - Normal Access Restrictions (NAR) */
-define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
-define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
-
-/* Supervisory FLASH - Public Key */
-define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
-define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
-
-/* Supervisory FLASH - Table of Content # 2 */
-define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
-define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
-
-/* Supervisory FLASH - Table of Content # 2 Copy */
-define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
-define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
-
-/* eFuse */
-define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
-define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
-
-/* XIP */
-define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
-define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
-
-define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
-define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
-
-
-define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
-/*-Sizes-*/
-if (!isdefinedsymbol(__STACK_SIZE)) {
-  define symbol __ICFEDIT_size_cstack__ = 0x1000;
-} else {
-  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
-}
-define symbol __ICFEDIT_size_proc_stack__ = 0x0;
-
-/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
-if (!isdefinedsymbol(__HEAP_SIZE)) {
-    define symbol __ICFEDIT_size_heap__ = 0x0400;
-} else {
-  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
-}
-/**** End of ICF editor section. ###ICF###*/
-
-/* By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
- * More about CM0+ prebuilt images, see here:
- * https://github.com/cypresssemiconductorco/psoc6cm0p
- */
-/* The size of the Cortex-M0+ application image */
-define symbol FLASH_CM0P_SIZE  = 0x2000;
-
-define memory mem with size = 4G;
-define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
-define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
-define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
-define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
-define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
-define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
-define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
-define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
-define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
-define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
-
-define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
-define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
-define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
-define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
-define block CM0P_RO with size = FLASH_CM0P_SIZE  { readonly section .cy_m0p_image };
-define block RO     {first section .intvec, readonly};
-
-define block cy_xip { section .cy_xip };
-
-/*-Initializations-*/
-initialize by copy { readwrite };
-do not initialize  { section .noinit, section .intvec_ram };
-
-/*-Placement-*/
-
-/* Flash - Cortex-M0+ application image */
-place at start of IROM1_region  { block CM0P_RO };
-
-/* Flash - Cortex-M4 application */
-place in          IROM1_region  { block RO };
-
-/* Used for the digital signature of the secure application and the Bootloader SDK application. */
-".cy_app_signature" : place at address (__ICFEDIT_region_IROM1_end__ - 0x200) { section .cy_app_signature };
-
-/* Emulated EEPROM Flash area */
-".cy_em_eeprom" : place at start of IROM2_region  { section .cy_em_eeprom };
-
-/* Supervisory Flash - User Data */
-".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
-
-/* Supervisory Flash - NAR */
-".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
-
-/* Supervisory Flash - Public Key */
-".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
-
-/* Supervisory Flash - TOC2 */
-".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
-
-/* Supervisory Flash - RTOC2 */
-".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
-
-/* eFuse */
-".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
-
-/* Execute in Place (XIP). See the smif driver documentation for details. */
-"cy_xip" : place at start of EROM1_region  { block cy_xip };
-
-/* RAM */
-place at start of IRAM1_region  { readwrite section .intvec_ram};
-place in          IRAM1_region  { readwrite };
-place at end   of IRAM1_region  { block HSTACK };
-
-/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
-".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
-
-
-keep {  section .cy_m0p_image,
-        section .cy_app_signature,
-        section .cy_em_eeprom,
-        section .cy_sflash_user_data,
-        section .cy_sflash_nar,
-        section .cy_sflash_public_key,
-        section .cy_toc_part2,
-        section .cy_rtoc_part2,
-        section .cy_efuse,
-        section .cy_xip,
-        section .cymeta,
-         };
-
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-define exported symbol __cy_memory_0_start    = 0x10000000;
-define exported symbol __cy_memory_0_length   = 0x00080000;
-define exported symbol __cy_memory_0_row_size = 0x200;
-
-/* Emulated EEPROM Flash area */
-define exported symbol __cy_memory_1_start    = 0x14000000;
-define exported symbol __cy_memory_1_length   = 0x8000;
-define exported symbol __cy_memory_1_row_size = 0x200;
-
-/* Supervisory Flash */
-define exported symbol __cy_memory_2_start    = 0x16000000;
-define exported symbol __cy_memory_2_length   = 0x8000;
-define exported symbol __cy_memory_2_row_size = 0x200;
-
-/* XIP */
-define exported symbol __cy_memory_3_start    = 0x18000000;
-define exported symbol __cy_memory_3_length   = 0x08000000;
-define exported symbol __cy_memory_3_row_size = 0x200;
-
-/* eFuse */
-define exported symbol __cy_memory_4_start    = 0x90700000;
-define exported symbol __cy_memory_4_length   = 0x100000;
-define exported symbol __cy_memory_4_row_size = 1;
-
-/* EOF */
+/*******************************************************************************
+* \file cy8c6xx5_cm4_dual.icf
+* \version 2.91
+*
+* Linker file for the IAR compiler.
+*
+* The main purpose of the linker script is to describe how the sections in the
+* input files should be mapped into the output file, and to control the memory
+* layout of the output file.
+*
+* \note The entry point is fixed and starts at 0x10000000. The valid application
+* image should be placed there.
+*
+* \note The linker files included with the PDL template projects must be generic
+* and handle all common use cases. Your project may not use every section
+* defined in the linker files. In that case you may see warnings during the
+* build process. In your project, you can simply comment out or remove the
+* relevant code in the linker file.
+*
+********************************************************************************
+* \copyright
+* Copyright 2016-2021 Cypress Semiconductor Corporation
+* SPDX-License-Identifier: Apache-2.0
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*******************************************************************************/
+
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+
+/* The symbols below define the location and size of blocks of memory in the target.
+ * Use these symbols to specify the memory regions available for allocation.
+ */
+
+/* The following symbols control RAM and flash memory allocation for the CM4 core.
+ * You can change the memory allocation by editing RAM and Flash symbols.
+ * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+ * Using this memory region for other purposes will lead to unexpected behavior.
+ * Your changes must be aligned with the corresponding symbols for CM0+ core in 'xx_cm0plus.icf',
+ * where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.icf'.
+ */
+/* RAM */
+define symbol __ICFEDIT_region_IRAM1_start__ = 0x08002000;
+define symbol __ICFEDIT_region_IRAM1_end__   = 0x0803F7FF;
+
+/* Flash */
+define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
+define symbol __ICFEDIT_region_IROM1_end__   = 0x1007FFFF;
+
+/* The following symbols define a 32K flash region used for EEPROM emulation.
+ * This region can also be used as the general purpose flash.
+ * You can assign sections to this memory region for only one of the cores.
+ * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
+ * Therefore, repurposing this memory region will prevent such middleware from operation.
+ */
+define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
+define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
+
+/* The following symbols define device specific memory regions and must not be changed. */
+/* Supervisory FLASH - User Data */
+define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
+define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
+
+/* Supervisory FLASH - Normal Access Restrictions (NAR) */
+define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
+define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
+
+/* Supervisory FLASH - Public Key */
+define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
+define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
+
+/* Supervisory FLASH - Table of Content # 2 */
+define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
+define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
+
+/* Supervisory FLASH - Table of Content # 2 Copy */
+define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
+define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
+
+/* eFuse */
+define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
+define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
+
+/* XIP */
+define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
+define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
+
+define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
+define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
+
+
+define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
+/*-Sizes-*/
+if (!isdefinedsymbol(__STACK_SIZE)) {
+  define symbol __ICFEDIT_size_cstack__ = 0x1000;
+} else {
+  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
+}
+define symbol __ICFEDIT_size_proc_stack__ = 0x0;
+
+/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
+if (!isdefinedsymbol(__HEAP_SIZE)) {
+    define symbol __ICFEDIT_size_heap__ = 0x0400;
+} else {
+  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
+}
+/**** End of ICF editor section. ###ICF###*/
+
+/* By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
+ * More about CM0+ prebuilt images, see here:
+ * https://github.com/cypresssemiconductorco/psoc6cm0p
+ */
+/* The size of the Cortex-M0+ application image */
+define symbol FLASH_CM0P_SIZE  = 0x2000;
+
+define memory mem with size = 4G;
+define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
+define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
+define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
+define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
+define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
+define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
+define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
+define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
+define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
+define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
+
+define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
+define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
+define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
+define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
+define block CM0P_RO with size = FLASH_CM0P_SIZE  { readonly section .cy_m0p_image };
+define block RO     {first section .intvec, readonly};
+
+define block cy_xip { section .cy_xip };
+
+/*-Initializations-*/
+initialize by copy { readwrite };
+do not initialize  { section .noinit, section .intvec_ram };
+
+/*-Placement-*/
+
+/* Flash - Cortex-M0+ application image */
+place at start of IROM1_region  { block CM0P_RO };
+
+/* Flash - Cortex-M4 application */
+place in          IROM1_region  { block RO };
+
+/* Used for the digital signature of the secure application and the Bootloader SDK application. */
+".cy_app_signature" : place at address (__ICFEDIT_region_IROM1_end__ - 0x200) { section .cy_app_signature };
+
+/* Emulated EEPROM Flash area */
+".cy_em_eeprom" : place at start of IROM2_region  { section .cy_em_eeprom };
+
+/* Supervisory Flash - User Data */
+".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
+
+/* Supervisory Flash - NAR */
+".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
+
+/* Supervisory Flash - Public Key */
+".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
+
+/* Supervisory Flash - TOC2 */
+".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
+
+/* Supervisory Flash - RTOC2 */
+".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
+
+/* eFuse */
+".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
+
+/* Execute in Place (XIP). See the smif driver documentation for details. */
+"cy_xip" : place at start of EROM1_region  { block cy_xip };
+
+/* RAM */
+place at start of IRAM1_region  { readwrite section .intvec_ram};
+place in          IRAM1_region  { readwrite };
+place at end   of IRAM1_region  { block HSTACK };
+
+/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
+".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
+
+
+keep {  section .cy_m0p_image,
+        section .cy_app_signature,
+        section .cy_em_eeprom,
+        section .cy_sflash_user_data,
+        section .cy_sflash_nar,
+        section .cy_sflash_public_key,
+        section .cy_toc_part2,
+        section .cy_rtoc_part2,
+        section .cy_efuse,
+        section .cy_xip,
+        section .cymeta,
+         };
+
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+define exported symbol __cy_memory_0_start    = 0x10000000;
+define exported symbol __cy_memory_0_length   = 0x00080000;
+define exported symbol __cy_memory_0_row_size = 0x200;
+
+/* Emulated EEPROM Flash area */
+define exported symbol __cy_memory_1_start    = 0x14000000;
+define exported symbol __cy_memory_1_length   = 0x8000;
+define exported symbol __cy_memory_1_row_size = 0x200;
+
+/* Supervisory Flash */
+define exported symbol __cy_memory_2_start    = 0x16000000;
+define exported symbol __cy_memory_2_length   = 0x8000;
+define exported symbol __cy_memory_2_row_size = 0x200;
+
+/* XIP */
+define exported symbol __cy_memory_3_start    = 0x18000000;
+define exported symbol __cy_memory_3_length   = 0x08000000;
+define exported symbol __cy_memory_3_row_size = 0x200;
+
+/* eFuse */
+define exported symbol __cy_memory_4_start    = 0x90700000;
+define exported symbol __cy_memory_4_length   = 0x100000;
+define exported symbol __cy_memory_4_row_size = 1;
+
+/* EOF */

bsp/Infineon/psoc6-cy8cproto-062S3-4343W/board/linker_scripts/link.sct

@@ -1,277 +1,277 @@
-#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m4
-; The first line specifies a preprocessor command that the linker invokes
-; to pass a scatter file through a C preprocessor.
-
-;*******************************************************************************
-;* \file cy8c6xx5_cm4_dual.sct
-;* \version 2.91
-;*
-;* Linker file for the ARMCC.
-;*
-;* The main purpose of the linker script is to describe how the sections in the
-;* input files should be mapped into the output file, and to control the memory
-;* layout of the output file.
-;*
-;* \note The entry point location is fixed and starts at 0x10000000. The valid
-;* application image should be placed there.
-;*
-;* \note The linker files included with the PDL template projects must be
-;* generic and handle all common use cases. Your project may not use every
-;* section defined in the linker files. In that case you may see the warnings
-;* during the build process: L6314W (no section matches pattern) and/or L6329W
-;* (pattern only matches removed unused sections). In your project, you can
-;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
-;* the linker, simply comment out or remove the relevant code in the linker
-;* file.
-;*
-;*******************************************************************************
-;* \copyright
-;* Copyright 2016-2021 Cypress Semiconductor Corporation
-;* SPDX-License-Identifier: Apache-2.0
-;*
-;* Licensed under the Apache License, Version 2.0 (the "License");
-;* you may not use this file except in compliance with the License.
-;* You may obtain a copy of the License at
-;*
-;*     http://www.apache.org/licenses/LICENSE-2.0
-;*
-;* Unless required by applicable law or agreed to in writing, software
-;* distributed under the License is distributed on an "AS IS" BASIS,
-;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-;* See the License for the specific language governing permissions and
-;* limitations under the License.
-;******************************************************************************/
-
-; The defines below describe the location and size of blocks of memory in the target.
-; Use these defines to specify the memory regions available for allocation.
-
-; The following defines control RAM and flash memory allocation for the CM4 core.
-; You can change the memory allocation by editing RAM and Flash defines.
-; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
-; Using this memory region for other purposes will lead to unexpected behavior.
-; Your changes must be aligned with the corresponding defines for CM0+ core in 'xx_cm0plus.scat',
-; where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.scat'.
-; RAM
-#define RAM_START               0x08002000
-#define RAM_SIZE                0x0003D800
-; Flash
-#define FLASH_START             0x10000000
-#define FLASH_SIZE              0x00080000
-
-; The size of the stack section at the end of CM4 SRAM
-#define STACK_SIZE              0x00001000
-
-; By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
-; More about CM0+ prebuilt images, see here:
-; https://github.com/cypresssemiconductorco/psoc6cm0p
-; The size of the Cortex-M0+ application flash image
-#define FLASH_CM0P_SIZE         0x2000
-
-; The following defines describe a 32K flash region used for EEPROM emulation.
-; This region can also be used as the general purpose flash.
-; You can assign sections to this memory region for only one of the cores.
-; Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
-; Therefore, repurposing this memory region will prevent such middleware from operation.
-#define EM_EEPROM_START         0x14000000
-#define EM_EEPROM_SIZE          0x8000
-
-; The following defines describe device specific memory regions and must not be changed.
-; Supervisory flash: User data
-#define SFLASH_USER_DATA_START  0x16000800
-#define SFLASH_USER_DATA_SIZE   0x00000800
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-#define SFLASH_NAR_START        0x16001A00
-#define SFLASH_NAR_SIZE         0x00000200
-
-; Supervisory flash: Public Key
-#define SFLASH_PUBLIC_KEY_START 0x16005A00
-#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
-
-; Supervisory flash: Table of Content # 2
-#define SFLASH_TOC_2_START      0x16007C00
-#define SFLASH_TOC_2_SIZE       0x00000200
-
-; Supervisory flash: Table of Content # 2 Copy
-#define SFLASH_RTOC_2_START     0x16007E00
-#define SFLASH_RTOC_2_SIZE      0x00000200
-
-; External memory
-#define XIP_START               0x18000000
-#define XIP_SIZE                0x08000000
-
-; eFuse
-#define EFUSE_START             0x90700000
-#define EFUSE_SIZE              0x100000
-
-
-; Cortex-M0+ application flash image area
-LR_IROM FLASH_START FLASH_CM0P_SIZE
-{
-    .cy_m0p_image +0 FLASH_CM0P_SIZE
-    {
-        * (.cy_m0p_image)
-    }
-}
-
-; Cortex-M4 application flash area
-LR_IROM1 (FLASH_START + FLASH_CM0P_SIZE) (FLASH_SIZE - FLASH_CM0P_SIZE)
-{
-    ER_FLASH_VECTORS +0
-    {
-        * (RESET, +FIRST)
-    }
-
-    ER_FLASH_CODE +0 FIXED
-    {
-        * (InRoot$$Sections)
-        * (+RO)
-    }
-
-    ER_RAM_VECTORS RAM_START UNINIT
-    {
-        * (RESET_RAM, +FIRST)
-    }
-
-    RW_RAM_DATA +0
-    {
-        * (.cy_ramfunc)
-        * (+RW, +ZI)
-    }
-
-    ; Place variables in the section that should not be initialized during the
-    ; device startup.
-    RW_IRAM1 +0 UNINIT
-    {
-        * (.noinit)
-    }
-
-    ; Application heap area (HEAP)
-    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
-    { 
-    }
-
-    ; Stack region growing down
-    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
-    {
-    }
-
-    ; Used for the digital signature of the secure application and the
-    ; Bootloader SDK application. The size of the section depends on the required
-    ; data size.
-    .cy_app_signature (FLASH_START + FLASH_SIZE - 256) 256
-    {
-        * (.cy_app_signature)
-    }
-}
-
-
-; Emulated EEPROM Flash area
-LR_EM_EEPROM EM_EEPROM_START EM_EEPROM_SIZE
-{
-    .cy_em_eeprom +0
-    {
-        * (.cy_em_eeprom)
-    }
-}
-
-; Supervisory flash: User data
-LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
-{
-    .cy_sflash_user_data +0
-    {
-        * (.cy_sflash_user_data)
-    }
-}
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
-{
-    .cy_sflash_nar +0
-    {
-        * (.cy_sflash_nar)
-    }
-}
-
-; Supervisory flash: Public Key
-LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
-{
-    .cy_sflash_public_key +0
-    {
-        * (.cy_sflash_public_key)
-    }
-}
-
-; Supervisory flash: Table of Content # 2
-LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
-{
-    .cy_toc_part2 +0
-    {
-        * (.cy_toc_part2)
-    }
-}
-
-; Supervisory flash: Table of Content # 2 Copy
-LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
-{
-    .cy_rtoc_part2 +0
-    {
-        * (.cy_rtoc_part2)
-    }
-}
-
-
-; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
-LR_EROM XIP_START XIP_SIZE
-{
-    cy_xip +0
-    {
-        * (.cy_xip)
-    }
-}
-
-
-; eFuse
-LR_EFUSE EFUSE_START EFUSE_SIZE
-{
-    .cy_efuse +0
-    {
-        * (.cy_efuse)
-    }
-}
-
-
-; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
-CYMETA 0x90500000
-{
-    .cymeta +0 { * (.cymeta) }
-}
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-#define __cy_memory_0_start 0x10000000
-#define __cy_memory_0_length  0x00080000
-#define __cy_memory_0_row_size 0x200
-
-/* Emulated EEPROM Flash area */
-#define __cy_memory_1_start    0x14000000
-#define __cy_memory_1_length   0x8000
-#define __cy_memory_1_row_size 0x200
-
-/* Supervisory Flash */
-#define __cy_memory_2_start    0x16000000
-#define __cy_memory_2_length   0x8000
-#define __cy_memory_2_row_size 0x200
-
-/* XIP */
-#define __cy_memory_3_start    0x18000000
-#define __cy_memory_3_length   0x08000000
-#define __cy_memory_3_row_size 0x200
-
-/* eFuse */
-#define __cy_memory_4_start    0x90700000
-#define __cy_memory_4_length   0x100000
-#define __cy_memory_4_row_size 1
-
-
-/* [] END OF FILE */
+#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m4
+; The first line specifies a preprocessor command that the linker invokes
+; to pass a scatter file through a C preprocessor.
+
+;*******************************************************************************
+;* \file cy8c6xx5_cm4_dual.sct
+;* \version 2.91
+;*
+;* Linker file for the ARMCC.
+;*
+;* The main purpose of the linker script is to describe how the sections in the
+;* input files should be mapped into the output file, and to control the memory
+;* layout of the output file.
+;*
+;* \note The entry point location is fixed and starts at 0x10000000. The valid
+;* application image should be placed there.
+;*
+;* \note The linker files included with the PDL template projects must be
+;* generic and handle all common use cases. Your project may not use every
+;* section defined in the linker files. In that case you may see the warnings
+;* during the build process: L6314W (no section matches pattern) and/or L6329W
+;* (pattern only matches removed unused sections). In your project, you can
+;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
+;* the linker, simply comment out or remove the relevant code in the linker
+;* file.
+;*
+;*******************************************************************************
+;* \copyright
+;* Copyright 2016-2021 Cypress Semiconductor Corporation
+;* SPDX-License-Identifier: Apache-2.0
+;*
+;* Licensed under the Apache License, Version 2.0 (the "License");
+;* you may not use this file except in compliance with the License.
+;* You may obtain a copy of the License at
+;*
+;*     http://www.apache.org/licenses/LICENSE-2.0
+;*
+;* Unless required by applicable law or agreed to in writing, software
+;* distributed under the License is distributed on an "AS IS" BASIS,
+;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+;* See the License for the specific language governing permissions and
+;* limitations under the License.
+;******************************************************************************/
+
+; The defines below describe the location and size of blocks of memory in the target.
+; Use these defines to specify the memory regions available for allocation.
+
+; The following defines control RAM and flash memory allocation for the CM4 core.
+; You can change the memory allocation by editing RAM and Flash defines.
+; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+; Using this memory region for other purposes will lead to unexpected behavior.
+; Your changes must be aligned with the corresponding defines for CM0+ core in 'xx_cm0plus.scat',
+; where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.scat'.
+; RAM
+#define RAM_START               0x08002000
+#define RAM_SIZE                0x0003D800
+; Flash
+#define FLASH_START             0x10000000
+#define FLASH_SIZE              0x00080000
+
+; The size of the stack section at the end of CM4 SRAM
+#define STACK_SIZE              0x00001000
+
+; By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
+; More about CM0+ prebuilt images, see here:
+; https://github.com/cypresssemiconductorco/psoc6cm0p
+; The size of the Cortex-M0+ application flash image
+#define FLASH_CM0P_SIZE         0x2000
+
+; The following defines describe a 32K flash region used for EEPROM emulation.
+; This region can also be used as the general purpose flash.
+; You can assign sections to this memory region for only one of the cores.
+; Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
+; Therefore, repurposing this memory region will prevent such middleware from operation.
+#define EM_EEPROM_START         0x14000000
+#define EM_EEPROM_SIZE          0x8000
+
+; The following defines describe device specific memory regions and must not be changed.
+; Supervisory flash: User data
+#define SFLASH_USER_DATA_START  0x16000800
+#define SFLASH_USER_DATA_SIZE   0x00000800
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+#define SFLASH_NAR_START        0x16001A00
+#define SFLASH_NAR_SIZE         0x00000200
+
+; Supervisory flash: Public Key
+#define SFLASH_PUBLIC_KEY_START 0x16005A00
+#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
+
+; Supervisory flash: Table of Content # 2
+#define SFLASH_TOC_2_START      0x16007C00
+#define SFLASH_TOC_2_SIZE       0x00000200
+
+; Supervisory flash: Table of Content # 2 Copy
+#define SFLASH_RTOC_2_START     0x16007E00
+#define SFLASH_RTOC_2_SIZE      0x00000200
+
+; External memory
+#define XIP_START               0x18000000
+#define XIP_SIZE                0x08000000
+
+; eFuse
+#define EFUSE_START             0x90700000
+#define EFUSE_SIZE              0x100000
+
+
+; Cortex-M0+ application flash image area
+LR_IROM FLASH_START FLASH_CM0P_SIZE
+{
+    .cy_m0p_image +0 FLASH_CM0P_SIZE
+    {
+        * (.cy_m0p_image)
+    }
+}
+
+; Cortex-M4 application flash area
+LR_IROM1 (FLASH_START + FLASH_CM0P_SIZE) (FLASH_SIZE - FLASH_CM0P_SIZE)
+{
+    ER_FLASH_VECTORS +0
+    {
+        * (RESET, +FIRST)
+    }
+
+    ER_FLASH_CODE +0 FIXED
+    {
+        * (InRoot$$Sections)
+        * (+RO)
+    }
+
+    ER_RAM_VECTORS RAM_START UNINIT
+    {
+        * (RESET_RAM, +FIRST)
+    }
+
+    RW_RAM_DATA +0
+    {
+        * (.cy_ramfunc)
+        * (+RW, +ZI)
+    }
+
+    ; Place variables in the section that should not be initialized during the
+    ; device startup.
+    RW_IRAM1 +0 UNINIT
+    {
+        * (.noinit)
+    }
+
+    ; Application heap area (HEAP)
+    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
+    {
+    }
+
+    ; Stack region growing down
+    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
+    {
+    }
+
+    ; Used for the digital signature of the secure application and the
+    ; Bootloader SDK application. The size of the section depends on the required
+    ; data size.
+    .cy_app_signature (FLASH_START + FLASH_SIZE - 256) 256
+    {
+        * (.cy_app_signature)
+    }
+}
+
+
+; Emulated EEPROM Flash area
+LR_EM_EEPROM EM_EEPROM_START EM_EEPROM_SIZE
+{
+    .cy_em_eeprom +0
+    {
+        * (.cy_em_eeprom)
+    }
+}
+
+; Supervisory flash: User data
+LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
+{
+    .cy_sflash_user_data +0
+    {
+        * (.cy_sflash_user_data)
+    }
+}
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
+{
+    .cy_sflash_nar +0
+    {
+        * (.cy_sflash_nar)
+    }
+}
+
+; Supervisory flash: Public Key
+LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
+{
+    .cy_sflash_public_key +0
+    {
+        * (.cy_sflash_public_key)
+    }
+}
+
+; Supervisory flash: Table of Content # 2
+LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
+{
+    .cy_toc_part2 +0
+    {
+        * (.cy_toc_part2)
+    }
+}
+
+; Supervisory flash: Table of Content # 2 Copy
+LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
+{
+    .cy_rtoc_part2 +0
+    {
+        * (.cy_rtoc_part2)
+    }
+}
+
+
+; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
+LR_EROM XIP_START XIP_SIZE
+{
+    cy_xip +0
+    {
+        * (.cy_xip)
+    }
+}
+
+
+; eFuse
+LR_EFUSE EFUSE_START EFUSE_SIZE
+{
+    .cy_efuse +0
+    {
+        * (.cy_efuse)
+    }
+}
+
+
+; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
+CYMETA 0x90500000
+{
+    .cymeta +0 { * (.cymeta) }
+}
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+#define __cy_memory_0_start 0x10000000
+#define __cy_memory_0_length  0x00080000
+#define __cy_memory_0_row_size 0x200
+
+/* Emulated EEPROM Flash area */
+#define __cy_memory_1_start    0x14000000
+#define __cy_memory_1_length   0x8000
+#define __cy_memory_1_row_size 0x200
+
+/* Supervisory Flash */
+#define __cy_memory_2_start    0x16000000
+#define __cy_memory_2_length   0x8000
+#define __cy_memory_2_row_size 0x200
+
+/* XIP */
+#define __cy_memory_3_start    0x18000000
+#define __cy_memory_3_length   0x08000000
+#define __cy_memory_3_row_size 0x200
+
+/* eFuse */
+#define __cy_memory_4_start    0x90700000
+#define __cy_memory_4_length   0x100000
+#define __cy_memory_4_row_size 1
+
+
+/* [] END OF FILE */

bsp/Infineon/psoc6-cy8cproto-062S3-4343W/libs/TARGET_CY8CPROTO-062S3-4343W/COMPONENT_CM0P/TOOLCHAIN_ARM/cy8c6xx5_cm0plus.sct

@@ -1,272 +1,272 @@
-#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m0
-; The first line specifies a preprocessor command that the linker invokes
-; to pass a scatter file through a C preprocessor.
-
-;*******************************************************************************
-;* \file cy8c6xx5_cm0plus.sct
-;* \version 2.91
-;*
-;* Linker file for the ARMCC.
-;*
-;* The main purpose of the linker script is to describe how the sections in the
-;* input files should be mapped into the output file, and to control the memory
-;* layout of the output file.
-;*
-;* \note The entry point location is fixed and starts at 0x10000000. The valid
-;* application image should be placed there.
-;*
-;* \note The linker files included with the PDL template projects must be
-;* generic and handle all common use cases. Your project may not use every
-;* section defined in the linker files. In that case you may see the warnings
-;* during the build process: L6314W (no section matches pattern) and/or L6329W
-;* (pattern only matches removed unused sections). In your project, you can
-;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
-;* the linker, simply comment out or remove the relevant code in the linker
-;* file.
-;*
-;*******************************************************************************
-;* \copyright
-;* Copyright 2016-2021 Cypress Semiconductor Corporation
-;* SPDX-License-Identifier: Apache-2.0
-;*
-;* Licensed under the Apache License, Version 2.0 (the "License");
-;* you may not use this file except in compliance with the License.
-;* You may obtain a copy of the License at
-;*
-;*     http://www.apache.org/licenses/LICENSE-2.0
-;*
-;* Unless required by applicable law or agreed to in writing, software
-;* distributed under the License is distributed on an "AS IS" BASIS,
-;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-;* See the License for the specific language governing permissions and
-;* limitations under the License.
-;******************************************************************************/
-
-; The defines below describe the location and size of blocks of memory in the target.
-; Use these defines to specify the memory regions available for allocation.
-
-; The following defines control RAM and flash memory allocation for the CM0+ core.
-; You can change the memory allocation by editing the RAM and Flash defines.
-; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
-; Using this memory region for other purposes will lead to unexpected behavior.
-; Your changes must be aligned with the corresponding defines for the CM4 core in 'xx_cm4_dual.scat',
-; where 'xx' is the device group; for example, 'cy8c6xx7_cm4_dual.scat'.
-; RAM
-#define RAM_START               0x08000000
-#define RAM_SIZE                0x00002000
-; Flash
-#define FLASH_START             0x10000000
-#define FLASH_SIZE              0x00002000
-
-; The size of the stack section at the end of CM0+ SRAM
-#define STACK_SIZE              0x00001000
-
-; The following defines describe a 32K flash region used for EEPROM emulation.
-; This region can also be used as the general purpose flash.
-; You can assign sections to this memory region for only one of the cores.
-; Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
-; Therefore, repurposing this memory region will prevent such middleware from operation.
-#define EM_EEPROM_START         0x14000000
-#define EM_EEPROM_SIZE          0x8000
-
-; The following defines describe device specific memory regions and must not be changed.
-; Supervisory flash: User data
-#define SFLASH_USER_DATA_START  0x16000800
-#define SFLASH_USER_DATA_SIZE   0x00000800
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-#define SFLASH_NAR_START        0x16001A00
-#define SFLASH_NAR_SIZE         0x00000200
-
-; Supervisory flash: Public Key
-#define SFLASH_PUBLIC_KEY_START 0x16005A00
-#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
-
-; Supervisory flash: Table of Content # 2
-#define SFLASH_TOC_2_START      0x16007C00
-#define SFLASH_TOC_2_SIZE       0x00000200
-
-; Supervisory flash: Table of Content # 2 Copy
-#define SFLASH_RTOC_2_START     0x16007E00
-#define SFLASH_RTOC_2_SIZE      0x00000200
-
-; External memory
-#define XIP_START               0x18000000
-#define XIP_SIZE                0x08000000
-
-; eFuse
-#define EFUSE_START             0x90700000
-#define EFUSE_SIZE              0x100000
-
-; Public RAM 
-; This is an unprotected public RAM region, with the placed .cy_sharedmem section.
-; This region is used to place objects that require full access from both cores.
-; Uncomment the following lines, define the region size and uncomment placement of
-; .cy_sharedmem section below.
-; #define PUBLIC_RAM_SIZE         %REGION_SIZE%
-; #define PUBLIC_RAM_START        (RAM_START + RAM_SIZE - STACK_SIZE - PUBLIC_RAM_SIZE)
-
-; Cortex-M0+ application flash area
-LR_IROM1 FLASH_START FLASH_SIZE
-{
-    .cy_app_header +0
-    {
-        * (.cy_app_header)
-    }
-
-    ER_FLASH_VECTORS +0
-    {
-        * (RESET, +FIRST)
-    }
-
-    ER_FLASH_CODE +0 FIXED
-    {
-        * (InRoot$$Sections)
-        * (+RO)
-    }
-
-    ER_RAM_VECTORS RAM_START UNINIT
-    {
-        * (RESET_RAM, +FIRST)
-    }
-
-    RW_RAM_DATA +0
-    {
-        * (.cy_ramfunc)
-        * (+RW, +ZI)
-    }
-
-    ; Place variables in the section that should not be initialized during the
-    ; device startup.
-    RW_IRAM1 +0 UNINIT
-    {
-        * (.noinit)
-    }
-
-    ; To use unprotected public RAM uncomment the following .cy_sharedmem section placement. Recalculate the HEAP start address.
-    ;RW_IRAM2 PUBLIC_RAM_START UNINIT
-    ;{
-    ;    * (.cy_sharedmem)
-    ;}
-
-    ; Application heap area (HEAP)
-    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
-    { 
-    }
-
-    ; Stack region growing down
-    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
-    {
-    }
-}
-
-
-; Emulated EEPROM Flash area
-LR_EM_EEPROM EM_EEPROM_START EM_EEPROM_SIZE
-{
-    .cy_em_eeprom +0
-    {
-        * (.cy_em_eeprom)
-    }
-}
-
-; Supervisory flash: User data
-LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
-{
-    .cy_sflash_user_data +0
-    {
-        * (.cy_sflash_user_data)
-    }
-}
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
-{
-    .cy_sflash_nar +0
-    {
-        * (.cy_sflash_nar)
-    }
-}
-
-; Supervisory flash: Public Key
-LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
-{
-    .cy_sflash_public_key +0
-    {
-        * (.cy_sflash_public_key)
-    }
-}
-
-; Supervisory flash: Table of Content # 2
-LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
-{
-    .cy_toc_part2 +0
-    {
-        * (.cy_toc_part2)
-    }
-}
-
-; Supervisory flash: Table of Content # 2 Copy
-LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
-{
-    .cy_rtoc_part2 +0
-    {
-        * (.cy_rtoc_part2)
-    }
-}
-
-
-; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
-LR_EROM XIP_START XIP_SIZE
-{
-    cy_xip +0
-    {
-        * (.cy_xip)
-    }
-}
-
-
-; eFuse
-LR_EFUSE EFUSE_START EFUSE_SIZE
-{
-    .cy_efuse +0
-    {
-        * (.cy_efuse)
-    }
-}
-
-
-; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
-CYMETA 0x90500000
-{
-    .cymeta +0 { * (.cymeta) }
-}
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-#define __cy_memory_0_start 0x10000000
-#define __cy_memory_0_length  0x00080000
-#define __cy_memory_0_row_size 0x200
-
-/* Emulated EEPROM Flash area */
-#define __cy_memory_1_start    0x14000000
-#define __cy_memory_1_length   0x8000
-#define __cy_memory_1_row_size 0x200
-
-/* Supervisory Flash */
-#define __cy_memory_2_start    0x16000000
-#define __cy_memory_2_length   0x8000
-#define __cy_memory_2_row_size 0x200
-
-/* XIP */
-#define __cy_memory_3_start    0x18000000
-#define __cy_memory_3_length   0x08000000
-#define __cy_memory_3_row_size 0x200
-
-/* eFuse */
-#define __cy_memory_4_start    0x90700000
-#define __cy_memory_4_length   0x100000
-#define __cy_memory_4_row_size 1
-
-
-/* [] END OF FILE */
+#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m0
+; The first line specifies a preprocessor command that the linker invokes
+; to pass a scatter file through a C preprocessor.
+
+;*******************************************************************************
+;* \file cy8c6xx5_cm0plus.sct
+;* \version 2.91
+;*
+;* Linker file for the ARMCC.
+;*
+;* The main purpose of the linker script is to describe how the sections in the
+;* input files should be mapped into the output file, and to control the memory
+;* layout of the output file.
+;*
+;* \note The entry point location is fixed and starts at 0x10000000. The valid
+;* application image should be placed there.
+;*
+;* \note The linker files included with the PDL template projects must be
+;* generic and handle all common use cases. Your project may not use every
+;* section defined in the linker files. In that case you may see the warnings
+;* during the build process: L6314W (no section matches pattern) and/or L6329W
+;* (pattern only matches removed unused sections). In your project, you can
+;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
+;* the linker, simply comment out or remove the relevant code in the linker
+;* file.
+;*
+;*******************************************************************************
+;* \copyright
+;* Copyright 2016-2021 Cypress Semiconductor Corporation
+;* SPDX-License-Identifier: Apache-2.0
+;*
+;* Licensed under the Apache License, Version 2.0 (the "License");
+;* you may not use this file except in compliance with the License.
+;* You may obtain a copy of the License at
+;*
+;*     http://www.apache.org/licenses/LICENSE-2.0
+;*
+;* Unless required by applicable law or agreed to in writing, software
+;* distributed under the License is distributed on an "AS IS" BASIS,
+;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+;* See the License for the specific language governing permissions and
+;* limitations under the License.
+;******************************************************************************/
+
+; The defines below describe the location and size of blocks of memory in the target.
+; Use these defines to specify the memory regions available for allocation.
+
+; The following defines control RAM and flash memory allocation for the CM0+ core.
+; You can change the memory allocation by editing the RAM and Flash defines.
+; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+; Using this memory region for other purposes will lead to unexpected behavior.
+; Your changes must be aligned with the corresponding defines for the CM4 core in 'xx_cm4_dual.scat',
+; where 'xx' is the device group; for example, 'cy8c6xx7_cm4_dual.scat'.
+; RAM
+#define RAM_START               0x08000000
+#define RAM_SIZE                0x00002000
+; Flash
+#define FLASH_START             0x10000000
+#define FLASH_SIZE              0x00002000
+
+; The size of the stack section at the end of CM0+ SRAM
+#define STACK_SIZE              0x00001000
+
+; The following defines describe a 32K flash region used for EEPROM emulation.
+; This region can also be used as the general purpose flash.
+; You can assign sections to this memory region for only one of the cores.
+; Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
+; Therefore, repurposing this memory region will prevent such middleware from operation.
+#define EM_EEPROM_START         0x14000000
+#define EM_EEPROM_SIZE          0x8000
+
+; The following defines describe device specific memory regions and must not be changed.
+; Supervisory flash: User data
+#define SFLASH_USER_DATA_START  0x16000800
+#define SFLASH_USER_DATA_SIZE   0x00000800
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+#define SFLASH_NAR_START        0x16001A00
+#define SFLASH_NAR_SIZE         0x00000200
+
+; Supervisory flash: Public Key
+#define SFLASH_PUBLIC_KEY_START 0x16005A00
+#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
+
+; Supervisory flash: Table of Content # 2
+#define SFLASH_TOC_2_START      0x16007C00
+#define SFLASH_TOC_2_SIZE       0x00000200
+
+; Supervisory flash: Table of Content # 2 Copy
+#define SFLASH_RTOC_2_START     0x16007E00
+#define SFLASH_RTOC_2_SIZE      0x00000200
+
+; External memory
+#define XIP_START               0x18000000
+#define XIP_SIZE                0x08000000
+
+; eFuse
+#define EFUSE_START             0x90700000
+#define EFUSE_SIZE              0x100000
+
+; Public RAM
+; This is an unprotected public RAM region, with the placed .cy_sharedmem section.
+; This region is used to place objects that require full access from both cores.
+; Uncomment the following lines, define the region size and uncomment placement of
+; .cy_sharedmem section below.
+; #define PUBLIC_RAM_SIZE         %REGION_SIZE%
+; #define PUBLIC_RAM_START        (RAM_START + RAM_SIZE - STACK_SIZE - PUBLIC_RAM_SIZE)
+
+; Cortex-M0+ application flash area
+LR_IROM1 FLASH_START FLASH_SIZE
+{
+    .cy_app_header +0
+    {
+        * (.cy_app_header)
+    }
+
+    ER_FLASH_VECTORS +0
+    {
+        * (RESET, +FIRST)
+    }
+
+    ER_FLASH_CODE +0 FIXED
+    {
+        * (InRoot$$Sections)
+        * (+RO)
+    }
+
+    ER_RAM_VECTORS RAM_START UNINIT
+    {
+        * (RESET_RAM, +FIRST)
+    }
+
+    RW_RAM_DATA +0
+    {
+        * (.cy_ramfunc)
+        * (+RW, +ZI)
+    }
+
+    ; Place variables in the section that should not be initialized during the
+    ; device startup.
+    RW_IRAM1 +0 UNINIT
+    {
+        * (.noinit)
+    }
+
+    ; To use unprotected public RAM uncomment the following .cy_sharedmem section placement. Recalculate the HEAP start address.
+    ;RW_IRAM2 PUBLIC_RAM_START UNINIT
+    ;{
+    ;    * (.cy_sharedmem)
+    ;}
+
+    ; Application heap area (HEAP)
+    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
+    {
+    }
+
+    ; Stack region growing down
+    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
+    {
+    }
+}
+
+
+; Emulated EEPROM Flash area
+LR_EM_EEPROM EM_EEPROM_START EM_EEPROM_SIZE
+{
+    .cy_em_eeprom +0
+    {
+        * (.cy_em_eeprom)
+    }
+}
+
+; Supervisory flash: User data
+LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
+{
+    .cy_sflash_user_data +0
+    {
+        * (.cy_sflash_user_data)
+    }
+}
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
+{
+    .cy_sflash_nar +0
+    {
+        * (.cy_sflash_nar)
+    }
+}
+
+; Supervisory flash: Public Key
+LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
+{
+    .cy_sflash_public_key +0
+    {
+        * (.cy_sflash_public_key)
+    }
+}
+
+; Supervisory flash: Table of Content # 2
+LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
+{
+    .cy_toc_part2 +0
+    {
+        * (.cy_toc_part2)
+    }
+}
+
+; Supervisory flash: Table of Content # 2 Copy
+LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
+{
+    .cy_rtoc_part2 +0
+    {
+        * (.cy_rtoc_part2)
+    }
+}
+
+
+; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
+LR_EROM XIP_START XIP_SIZE
+{
+    cy_xip +0
+    {
+        * (.cy_xip)
+    }
+}
+
+
+; eFuse
+LR_EFUSE EFUSE_START EFUSE_SIZE
+{
+    .cy_efuse +0
+    {
+        * (.cy_efuse)
+    }
+}
+
+
+; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
+CYMETA 0x90500000
+{
+    .cymeta +0 { * (.cymeta) }
+}
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+#define __cy_memory_0_start 0x10000000
+#define __cy_memory_0_length  0x00080000
+#define __cy_memory_0_row_size 0x200
+
+/* Emulated EEPROM Flash area */
+#define __cy_memory_1_start    0x14000000
+#define __cy_memory_1_length   0x8000
+#define __cy_memory_1_row_size 0x200
+
+/* Supervisory Flash */
+#define __cy_memory_2_start    0x16000000
+#define __cy_memory_2_length   0x8000
+#define __cy_memory_2_row_size 0x200
+
+/* XIP */
+#define __cy_memory_3_start    0x18000000
+#define __cy_memory_3_length   0x08000000
+#define __cy_memory_3_row_size 0x200
+
+/* eFuse */
+#define __cy_memory_4_start    0x90700000
+#define __cy_memory_4_length   0x100000
+#define __cy_memory_4_row_size 1
+
+
+/* [] END OF FILE */

bsp/Infineon/psoc6-cy8cproto-062S3-4343W/libs/TARGET_CY8CPROTO-062S3-4343W/COMPONENT_CM0P/TOOLCHAIN_IAR/cy8c6xx5_cm0plus.icf

@@ -1,253 +1,253 @@
-/*******************************************************************************
-* \file cy8c6xx5_cm0plus.icf
-* \version 2.91
-*
-* Linker file for the IAR compiler.
-*
-* The main purpose of the linker script is to describe how the sections in the
-* input files should be mapped into the output file, and to control the memory
-* layout of the output file.
-*
-* \note The entry point is fixed and starts at 0x10000000. The valid application
-* image should be placed there.
-*
-* \note The linker files included with the PDL template projects must be generic
-* and handle all common use cases. Your project may not use every section
-* defined in the linker files. In that case you may see warnings during the
-* build process. In your project, you can simply comment out or remove the
-* relevant code in the linker file.
-*
-********************************************************************************
-* \copyright
-* Copyright 2016-2021 Cypress Semiconductor Corporation
-* SPDX-License-Identifier: Apache-2.0
-*
-* Licensed under the Apache License, Version 2.0 (the "License");
-* you may not use this file except in compliance with the License.
-* You may obtain a copy of the License at
-*
-*     http://www.apache.org/licenses/LICENSE-2.0
-*
-* Unless required by applicable law or agreed to in writing, software
-* distributed under the License is distributed on an "AS IS" BASIS,
-* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-* See the License for the specific language governing permissions and
-* limitations under the License.
-*******************************************************************************/
-
-/*###ICF### Section handled by ICF editor, don't touch! ****/
-/*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
-/*-Specials-*/
-define symbol __ICFEDIT_intvec_start__ = 0x00000000;
-
-/*-Sizes-*/
-if (!isdefinedsymbol(__STACK_SIZE)) {
-  define symbol __ICFEDIT_size_cstack__ = 0x1000;
-} else {
-  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
-}
-define symbol __ICFEDIT_size_proc_stack__ = 0x0;
-
-/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
-if (!isdefinedsymbol(__HEAP_SIZE)) {
-    define symbol __ICFEDIT_size_heap__ = 0x0400;
-} else {
-  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
-}
-
-/* The symbols below define the location and size of blocks of memory in the target.
- * Use these symbols to specify the memory regions available for allocation.
- */
-
-/* The following symbols control RAM and flash memory allocation for the CM0+ core.
- * You can change the memory allocation by editing RAM and Flash symbols.
- * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
- * Using this memory region for other purposes will lead to unexpected behavior.
- * Your changes must be aligned with the corresponding symbols for CM4 core in 'xx_cm4_dual.icf',
- * where 'xx' is the device group; for example, 'cy8c6xx7_cm4_dual.icf'.
- */
-/* RAM */
-define symbol __ICFEDIT_region_IRAM1_start__ = 0x08000000;
-define symbol __ICFEDIT_region_IRAM1_end__   = 0x08001FFF;
-
-/* Flash */
-define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
-define symbol __ICFEDIT_region_IROM1_end__   = 0x10001FFF;
-
-/* The following symbols define a 32K flash region used for EEPROM emulation.
- * This region can also be used as the general purpose flash.
- * You can assign sections to this memory region for only one of the cores.
- * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
- * Therefore, repurposing this memory region will prevent such middleware from operation.
- */
-define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
-define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
-
-/* The following symbols define device specific memory regions and must not be changed. */
-/* Supervisory FLASH - User Data */
-define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
-define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
-
-/* Supervisory FLASH - Normal Access Restrictions (NAR) */
-define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
-define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
-
-/* Supervisory FLASH - Public Key */
-define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
-define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
-
-/* Supervisory FLASH - Table of Content # 2 */
-define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
-define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
-
-/* Supervisory FLASH - Table of Content # 2 Copy */
-define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
-define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
-
-/* eFuse */
-define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
-define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
-
-/* XIP */
-define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
-define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
-
-define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
-define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
-
-
-define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
-/**** End of ICF editor section. ###ICF###*/
-
-
-define memory mem with size = 4G;
-define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
-define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
-define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
-define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
-define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
-define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
-define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
-define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
-define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
-define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
-
-/* Public RAM 
- * This is an unprotected public RAM region, with the placed .cy_sharedmem section.
- * This region is used to place objects that require full access from both cores.
- * Uncomment the following lines, define region size, and uncomment the placement of
- * .cy_sharedmem section below in the IRAM2_region. Also define the __ICFEDIT_region_IRAM2_start__
- *  and __ICFEDIT_region_IRAM2_end__ to place the IRAM2_region.
- */
-/*
-define region IRAM2_region = mem:[from __ICFEDIT_region_IRAM2_start__ to __ICFEDIT_region_IRAM2_end__];
-*/
-
-define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
-define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
-define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
-define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
-define block RO     {first section .intvec, readonly};
-
-define block cy_xip { section .cy_xip };
-
-/*-Initializations-*/
-initialize by copy { readwrite };
-do not initialize  { section .noinit, section .intvec_ram };
-
-/*-Placement-*/
-
-/* Flash - Cortex-M0+ application */
-".cy_app_header" : place at start of IROM1_region  { section .cy_app_header };
-place in          IROM1_region  { block RO };
-
-/* Emulated EEPROM Flash area */
-".cy_em_eeprom" : place at start of IROM2_region  { section .cy_em_eeprom };
-
-/* Supervisory Flash - User Data */
-".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
-
-/* Supervisory Flash - NAR */
-".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
-
-/* Supervisory Flash - Public Key */
-".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
-
-/* Supervisory Flash - TOC2 */
-".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
-
-/* Supervisory Flash - RTOC2 */
-".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
-
-/* eFuse */
-".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
-
-/* Execute in Place (XIP). See the smif driver documentation for details. */
-"cy_xip" : place at start of EROM1_region  { block cy_xip };
-
-/* RAM */
-place at start of IRAM1_region  { readwrite section .intvec_ram};
-place in          IRAM1_region  { readwrite };
-place at end   of IRAM1_region  { block HSTACK };
-
-/* Public RAM 
- *To use unprotected public RAM, uncomment the following .cy_sharedmem section placement.
- */
-/*
-place at start of IRAM2_region  { section .cy_sharedmem };
-*/
-
-/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
-".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
-
-
-keep {  section .cy_app_header,
-        section .cy_em_eeprom,
-        section .cy_sflash_user_data,
-        section .cy_sflash_nar,
-        section .cy_sflash_public_key,
-        section .cy_toc_part2,
-        section .cy_rtoc_part2,
-        section .cy_efuse,
-        section .cy_xip,
-        section .cymeta,
-         };
-
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-define exported symbol __cy_memory_0_start    = 0x10000000;
-define exported symbol __cy_memory_0_length   = 0x00080000;
-define exported symbol __cy_memory_0_row_size = 0x200;
-
-/* Emulated EEPROM Flash area */
-define exported symbol __cy_memory_1_start    = 0x14000000;
-define exported symbol __cy_memory_1_length   = 0x8000;
-define exported symbol __cy_memory_1_row_size = 0x200;
-
-/* Supervisory Flash */
-define exported symbol __cy_memory_2_start    = 0x16000000;
-define exported symbol __cy_memory_2_length   = 0x8000;
-define exported symbol __cy_memory_2_row_size = 0x200;
-
-/* XIP */
-define exported symbol __cy_memory_3_start    = 0x18000000;
-define exported symbol __cy_memory_3_length   = 0x08000000;
-define exported symbol __cy_memory_3_row_size = 0x200;
-
-/* eFuse */
-define exported symbol __cy_memory_4_start    = 0x90700000;
-define exported symbol __cy_memory_4_length   = 0x100000;
-define exported symbol __cy_memory_4_row_size = 1;
-
-/* EOF */
+/*******************************************************************************
+* \file cy8c6xx5_cm0plus.icf
+* \version 2.91
+*
+* Linker file for the IAR compiler.
+*
+* The main purpose of the linker script is to describe how the sections in the
+* input files should be mapped into the output file, and to control the memory
+* layout of the output file.
+*
+* \note The entry point is fixed and starts at 0x10000000. The valid application
+* image should be placed there.
+*
+* \note The linker files included with the PDL template projects must be generic
+* and handle all common use cases. Your project may not use every section
+* defined in the linker files. In that case you may see warnings during the
+* build process. In your project, you can simply comment out or remove the
+* relevant code in the linker file.
+*
+********************************************************************************
+* \copyright
+* Copyright 2016-2021 Cypress Semiconductor Corporation
+* SPDX-License-Identifier: Apache-2.0
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*******************************************************************************/
+
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+
+/*-Sizes-*/
+if (!isdefinedsymbol(__STACK_SIZE)) {
+  define symbol __ICFEDIT_size_cstack__ = 0x1000;
+} else {
+  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
+}
+define symbol __ICFEDIT_size_proc_stack__ = 0x0;
+
+/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
+if (!isdefinedsymbol(__HEAP_SIZE)) {
+    define symbol __ICFEDIT_size_heap__ = 0x0400;
+} else {
+  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
+}
+
+/* The symbols below define the location and size of blocks of memory in the target.
+ * Use these symbols to specify the memory regions available for allocation.
+ */
+
+/* The following symbols control RAM and flash memory allocation for the CM0+ core.
+ * You can change the memory allocation by editing RAM and Flash symbols.
+ * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+ * Using this memory region for other purposes will lead to unexpected behavior.
+ * Your changes must be aligned with the corresponding symbols for CM4 core in 'xx_cm4_dual.icf',
+ * where 'xx' is the device group; for example, 'cy8c6xx7_cm4_dual.icf'.
+ */
+/* RAM */
+define symbol __ICFEDIT_region_IRAM1_start__ = 0x08000000;
+define symbol __ICFEDIT_region_IRAM1_end__   = 0x08001FFF;
+
+/* Flash */
+define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
+define symbol __ICFEDIT_region_IROM1_end__   = 0x10001FFF;
+
+/* The following symbols define a 32K flash region used for EEPROM emulation.
+ * This region can also be used as the general purpose flash.
+ * You can assign sections to this memory region for only one of the cores.
+ * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
+ * Therefore, repurposing this memory region will prevent such middleware from operation.
+ */
+define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
+define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
+
+/* The following symbols define device specific memory regions and must not be changed. */
+/* Supervisory FLASH - User Data */
+define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
+define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
+
+/* Supervisory FLASH - Normal Access Restrictions (NAR) */
+define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
+define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
+
+/* Supervisory FLASH - Public Key */
+define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
+define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
+
+/* Supervisory FLASH - Table of Content # 2 */
+define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
+define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
+
+/* Supervisory FLASH - Table of Content # 2 Copy */
+define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
+define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
+
+/* eFuse */
+define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
+define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
+
+/* XIP */
+define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
+define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
+
+define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
+define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
+
+
+define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
+define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
+define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
+define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
+define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
+define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
+define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
+define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
+define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
+define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
+
+/* Public RAM
+ * This is an unprotected public RAM region, with the placed .cy_sharedmem section.
+ * This region is used to place objects that require full access from both cores.
+ * Uncomment the following lines, define region size, and uncomment the placement of
+ * .cy_sharedmem section below in the IRAM2_region. Also define the __ICFEDIT_region_IRAM2_start__
+ *  and __ICFEDIT_region_IRAM2_end__ to place the IRAM2_region.
+ */
+/*
+define region IRAM2_region = mem:[from __ICFEDIT_region_IRAM2_start__ to __ICFEDIT_region_IRAM2_end__];
+*/
+
+define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
+define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
+define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
+define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
+define block RO     {first section .intvec, readonly};
+
+define block cy_xip { section .cy_xip };
+
+/*-Initializations-*/
+initialize by copy { readwrite };
+do not initialize  { section .noinit, section .intvec_ram };
+
+/*-Placement-*/
+
+/* Flash - Cortex-M0+ application */
+".cy_app_header" : place at start of IROM1_region  { section .cy_app_header };
+place in          IROM1_region  { block RO };
+
+/* Emulated EEPROM Flash area */
+".cy_em_eeprom" : place at start of IROM2_region  { section .cy_em_eeprom };
+
+/* Supervisory Flash - User Data */
+".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
+
+/* Supervisory Flash - NAR */
+".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
+
+/* Supervisory Flash - Public Key */
+".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
+
+/* Supervisory Flash - TOC2 */
+".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
+
+/* Supervisory Flash - RTOC2 */
+".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
+
+/* eFuse */
+".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
+
+/* Execute in Place (XIP). See the smif driver documentation for details. */
+"cy_xip" : place at start of EROM1_region  { block cy_xip };
+
+/* RAM */
+place at start of IRAM1_region  { readwrite section .intvec_ram};
+place in          IRAM1_region  { readwrite };
+place at end   of IRAM1_region  { block HSTACK };
+
+/* Public RAM
+ *To use unprotected public RAM, uncomment the following .cy_sharedmem section placement.
+ */
+/*
+place at start of IRAM2_region  { section .cy_sharedmem };
+*/
+
+/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
+".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
+
+
+keep {  section .cy_app_header,
+        section .cy_em_eeprom,
+        section .cy_sflash_user_data,
+        section .cy_sflash_nar,
+        section .cy_sflash_public_key,
+        section .cy_toc_part2,
+        section .cy_rtoc_part2,
+        section .cy_efuse,
+        section .cy_xip,
+        section .cymeta,
+         };
+
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+define exported symbol __cy_memory_0_start    = 0x10000000;
+define exported symbol __cy_memory_0_length   = 0x00080000;
+define exported symbol __cy_memory_0_row_size = 0x200;
+
+/* Emulated EEPROM Flash area */
+define exported symbol __cy_memory_1_start    = 0x14000000;
+define exported symbol __cy_memory_1_length   = 0x8000;
+define exported symbol __cy_memory_1_row_size = 0x200;
+
+/* Supervisory Flash */
+define exported symbol __cy_memory_2_start    = 0x16000000;
+define exported symbol __cy_memory_2_length   = 0x8000;
+define exported symbol __cy_memory_2_row_size = 0x200;
+
+/* XIP */
+define exported symbol __cy_memory_3_start    = 0x18000000;
+define exported symbol __cy_memory_3_length   = 0x08000000;
+define exported symbol __cy_memory_3_row_size = 0x200;
+
+/* eFuse */
+define exported symbol __cy_memory_4_start    = 0x90700000;
+define exported symbol __cy_memory_4_length   = 0x100000;
+define exported symbol __cy_memory_4_row_size = 1;
+
+/* EOF */

bsp/Infineon/psoc6-cy8cproto-062S3-4343W/libs/TARGET_CY8CPROTO-062S3-4343W/COMPONENT_CM4/TOOLCHAIN_ARM/cy8c6xx5_cm4_dual.sct

@@ -1,277 +1,277 @@
-#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m4
-; The first line specifies a preprocessor command that the linker invokes
-; to pass a scatter file through a C preprocessor.
-
-;*******************************************************************************
-;* \file cy8c6xx5_cm4_dual.sct
-;* \version 2.91
-;*
-;* Linker file for the ARMCC.
-;*
-;* The main purpose of the linker script is to describe how the sections in the
-;* input files should be mapped into the output file, and to control the memory
-;* layout of the output file.
-;*
-;* \note The entry point location is fixed and starts at 0x10000000. The valid
-;* application image should be placed there.
-;*
-;* \note The linker files included with the PDL template projects must be
-;* generic and handle all common use cases. Your project may not use every
-;* section defined in the linker files. In that case you may see the warnings
-;* during the build process: L6314W (no section matches pattern) and/or L6329W
-;* (pattern only matches removed unused sections). In your project, you can
-;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
-;* the linker, simply comment out or remove the relevant code in the linker
-;* file.
-;*
-;*******************************************************************************
-;* \copyright
-;* Copyright 2016-2021 Cypress Semiconductor Corporation
-;* SPDX-License-Identifier: Apache-2.0
-;*
-;* Licensed under the Apache License, Version 2.0 (the "License");
-;* you may not use this file except in compliance with the License.
-;* You may obtain a copy of the License at
-;*
-;*     http://www.apache.org/licenses/LICENSE-2.0
-;*
-;* Unless required by applicable law or agreed to in writing, software
-;* distributed under the License is distributed on an "AS IS" BASIS,
-;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-;* See the License for the specific language governing permissions and
-;* limitations under the License.
-;******************************************************************************/
-
-; The defines below describe the location and size of blocks of memory in the target.
-; Use these defines to specify the memory regions available for allocation.
-
-; The following defines control RAM and flash memory allocation for the CM4 core.
-; You can change the memory allocation by editing RAM and Flash defines.
-; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
-; Using this memory region for other purposes will lead to unexpected behavior.
-; Your changes must be aligned with the corresponding defines for CM0+ core in 'xx_cm0plus.scat',
-; where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.scat'.
-; RAM
-#define RAM_START               0x08002000
-#define RAM_SIZE                0x0003D800
-; Flash
-#define FLASH_START             0x10000000
-#define FLASH_SIZE              0x00080000
-
-; The size of the stack section at the end of CM4 SRAM
-#define STACK_SIZE              0x00001000
-
-; By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
-; More about CM0+ prebuilt images, see here:
-; https://github.com/cypresssemiconductorco/psoc6cm0p
-; The size of the Cortex-M0+ application flash image
-#define FLASH_CM0P_SIZE         0x2000
-
-; The following defines describe a 32K flash region used for EEPROM emulation.
-; This region can also be used as the general purpose flash.
-; You can assign sections to this memory region for only one of the cores.
-; Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
-; Therefore, repurposing this memory region will prevent such middleware from operation.
-#define EM_EEPROM_START         0x14000000
-#define EM_EEPROM_SIZE          0x8000
-
-; The following defines describe device specific memory regions and must not be changed.
-; Supervisory flash: User data
-#define SFLASH_USER_DATA_START  0x16000800
-#define SFLASH_USER_DATA_SIZE   0x00000800
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-#define SFLASH_NAR_START        0x16001A00
-#define SFLASH_NAR_SIZE         0x00000200
-
-; Supervisory flash: Public Key
-#define SFLASH_PUBLIC_KEY_START 0x16005A00
-#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
-
-; Supervisory flash: Table of Content # 2
-#define SFLASH_TOC_2_START      0x16007C00
-#define SFLASH_TOC_2_SIZE       0x00000200
-
-; Supervisory flash: Table of Content # 2 Copy
-#define SFLASH_RTOC_2_START     0x16007E00
-#define SFLASH_RTOC_2_SIZE      0x00000200
-
-; External memory
-#define XIP_START               0x18000000
-#define XIP_SIZE                0x08000000
-
-; eFuse
-#define EFUSE_START             0x90700000
-#define EFUSE_SIZE              0x100000
-
-
-; Cortex-M0+ application flash image area
-LR_IROM FLASH_START FLASH_CM0P_SIZE
-{
-    .cy_m0p_image +0 FLASH_CM0P_SIZE
-    {
-        * (.cy_m0p_image)
-    }
-}
-
-; Cortex-M4 application flash area
-LR_IROM1 (FLASH_START + FLASH_CM0P_SIZE) (FLASH_SIZE - FLASH_CM0P_SIZE)
-{
-    ER_FLASH_VECTORS +0
-    {
-        * (RESET, +FIRST)
-    }
-
-    ER_FLASH_CODE +0 FIXED
-    {
-        * (InRoot$$Sections)
-        * (+RO)
-    }
-
-    ER_RAM_VECTORS RAM_START UNINIT
-    {
-        * (RESET_RAM, +FIRST)
-    }
-
-    RW_RAM_DATA +0
-    {
-        * (.cy_ramfunc)
-        * (+RW, +ZI)
-    }
-
-    ; Place variables in the section that should not be initialized during the
-    ; device startup.
-    RW_IRAM1 +0 UNINIT
-    {
-        * (.noinit)
-    }
-
-    ; Application heap area (HEAP)
-    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
-    { 
-    }
-
-    ; Stack region growing down
-    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
-    {
-    }
-
-    ; Used for the digital signature of the secure application and the
-    ; Bootloader SDK application. The size of the section depends on the required
-    ; data size.
-    .cy_app_signature (FLASH_START + FLASH_SIZE - 256) 256
-    {
-        * (.cy_app_signature)
-    }
-}
-
-
-; Emulated EEPROM Flash area
-LR_EM_EEPROM EM_EEPROM_START EM_EEPROM_SIZE
-{
-    .cy_em_eeprom +0
-    {
-        * (.cy_em_eeprom)
-    }
-}
-
-; Supervisory flash: User data
-LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
-{
-    .cy_sflash_user_data +0
-    {
-        * (.cy_sflash_user_data)
-    }
-}
-
-; Supervisory flash: Normal Access Restrictions (NAR)
-LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
-{
-    .cy_sflash_nar +0
-    {
-        * (.cy_sflash_nar)
-    }
-}
-
-; Supervisory flash: Public Key
-LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
-{
-    .cy_sflash_public_key +0
-    {
-        * (.cy_sflash_public_key)
-    }
-}
-
-; Supervisory flash: Table of Content # 2
-LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
-{
-    .cy_toc_part2 +0
-    {
-        * (.cy_toc_part2)
-    }
-}
-
-; Supervisory flash: Table of Content # 2 Copy
-LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
-{
-    .cy_rtoc_part2 +0
-    {
-        * (.cy_rtoc_part2)
-    }
-}
-
-
-; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
-LR_EROM XIP_START XIP_SIZE
-{
-    cy_xip +0
-    {
-        * (.cy_xip)
-    }
-}
-
-
-; eFuse
-LR_EFUSE EFUSE_START EFUSE_SIZE
-{
-    .cy_efuse +0
-    {
-        * (.cy_efuse)
-    }
-}
-
-
-; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
-CYMETA 0x90500000
-{
-    .cymeta +0 { * (.cymeta) }
-}
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-#define __cy_memory_0_start 0x10000000
-#define __cy_memory_0_length  0x00080000
-#define __cy_memory_0_row_size 0x200
-
-/* Emulated EEPROM Flash area */
-#define __cy_memory_1_start    0x14000000
-#define __cy_memory_1_length   0x8000
-#define __cy_memory_1_row_size 0x200
-
-/* Supervisory Flash */
-#define __cy_memory_2_start    0x16000000
-#define __cy_memory_2_length   0x8000
-#define __cy_memory_2_row_size 0x200
-
-/* XIP */
-#define __cy_memory_3_start    0x18000000
-#define __cy_memory_3_length   0x08000000
-#define __cy_memory_3_row_size 0x200
-
-/* eFuse */
-#define __cy_memory_4_start    0x90700000
-#define __cy_memory_4_length   0x100000
-#define __cy_memory_4_row_size 1
-
-
-/* [] END OF FILE */
+#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m4
+; The first line specifies a preprocessor command that the linker invokes
+; to pass a scatter file through a C preprocessor.
+
+;*******************************************************************************
+;* \file cy8c6xx5_cm4_dual.sct
+;* \version 2.91
+;*
+;* Linker file for the ARMCC.
+;*
+;* The main purpose of the linker script is to describe how the sections in the
+;* input files should be mapped into the output file, and to control the memory
+;* layout of the output file.
+;*
+;* \note The entry point location is fixed and starts at 0x10000000. The valid
+;* application image should be placed there.
+;*
+;* \note The linker files included with the PDL template projects must be
+;* generic and handle all common use cases. Your project may not use every
+;* section defined in the linker files. In that case you may see the warnings
+;* during the build process: L6314W (no section matches pattern) and/or L6329W
+;* (pattern only matches removed unused sections). In your project, you can
+;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
+;* the linker, simply comment out or remove the relevant code in the linker
+;* file.
+;*
+;*******************************************************************************
+;* \copyright
+;* Copyright 2016-2021 Cypress Semiconductor Corporation
+;* SPDX-License-Identifier: Apache-2.0
+;*
+;* Licensed under the Apache License, Version 2.0 (the "License");
+;* you may not use this file except in compliance with the License.
+;* You may obtain a copy of the License at
+;*
+;*     http://www.apache.org/licenses/LICENSE-2.0
+;*
+;* Unless required by applicable law or agreed to in writing, software
+;* distributed under the License is distributed on an "AS IS" BASIS,
+;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+;* See the License for the specific language governing permissions and
+;* limitations under the License.
+;******************************************************************************/
+
+; The defines below describe the location and size of blocks of memory in the target.
+; Use these defines to specify the memory regions available for allocation.
+
+; The following defines control RAM and flash memory allocation for the CM4 core.
+; You can change the memory allocation by editing RAM and Flash defines.
+; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+; Using this memory region for other purposes will lead to unexpected behavior.
+; Your changes must be aligned with the corresponding defines for CM0+ core in 'xx_cm0plus.scat',
+; where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.scat'.
+; RAM
+#define RAM_START               0x08002000
+#define RAM_SIZE                0x0003D800
+; Flash
+#define FLASH_START             0x10000000
+#define FLASH_SIZE              0x00080000
+
+; The size of the stack section at the end of CM4 SRAM
+#define STACK_SIZE              0x00001000
+
+; By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
+; More about CM0+ prebuilt images, see here:
+; https://github.com/cypresssemiconductorco/psoc6cm0p
+; The size of the Cortex-M0+ application flash image
+#define FLASH_CM0P_SIZE         0x2000
+
+; The following defines describe a 32K flash region used for EEPROM emulation.
+; This region can also be used as the general purpose flash.
+; You can assign sections to this memory region for only one of the cores.
+; Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
+; Therefore, repurposing this memory region will prevent such middleware from operation.
+#define EM_EEPROM_START         0x14000000
+#define EM_EEPROM_SIZE          0x8000
+
+; The following defines describe device specific memory regions and must not be changed.
+; Supervisory flash: User data
+#define SFLASH_USER_DATA_START  0x16000800
+#define SFLASH_USER_DATA_SIZE   0x00000800
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+#define SFLASH_NAR_START        0x16001A00
+#define SFLASH_NAR_SIZE         0x00000200
+
+; Supervisory flash: Public Key
+#define SFLASH_PUBLIC_KEY_START 0x16005A00
+#define SFLASH_PUBLIC_KEY_SIZE  0x00000C00
+
+; Supervisory flash: Table of Content # 2
+#define SFLASH_TOC_2_START      0x16007C00
+#define SFLASH_TOC_2_SIZE       0x00000200
+
+; Supervisory flash: Table of Content # 2 Copy
+#define SFLASH_RTOC_2_START     0x16007E00
+#define SFLASH_RTOC_2_SIZE      0x00000200
+
+; External memory
+#define XIP_START               0x18000000
+#define XIP_SIZE                0x08000000
+
+; eFuse
+#define EFUSE_START             0x90700000
+#define EFUSE_SIZE              0x100000
+
+
+; Cortex-M0+ application flash image area
+LR_IROM FLASH_START FLASH_CM0P_SIZE
+{
+    .cy_m0p_image +0 FLASH_CM0P_SIZE
+    {
+        * (.cy_m0p_image)
+    }
+}
+
+; Cortex-M4 application flash area
+LR_IROM1 (FLASH_START + FLASH_CM0P_SIZE) (FLASH_SIZE - FLASH_CM0P_SIZE)
+{
+    ER_FLASH_VECTORS +0
+    {
+        * (RESET, +FIRST)
+    }
+
+    ER_FLASH_CODE +0 FIXED
+    {
+        * (InRoot$$Sections)
+        * (+RO)
+    }
+
+    ER_RAM_VECTORS RAM_START UNINIT
+    {
+        * (RESET_RAM, +FIRST)
+    }
+
+    RW_RAM_DATA +0
+    {
+        * (.cy_ramfunc)
+        * (+RW, +ZI)
+    }
+
+    ; Place variables in the section that should not be initialized during the
+    ; device startup.
+    RW_IRAM1 +0 UNINIT
+    {
+        * (.noinit)
+    }
+
+    ; Application heap area (HEAP)
+    ARM_LIB_HEAP  +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
+    {
+    }
+
+    ; Stack region growing down
+    ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
+    {
+    }
+
+    ; Used for the digital signature of the secure application and the
+    ; Bootloader SDK application. The size of the section depends on the required
+    ; data size.
+    .cy_app_signature (FLASH_START + FLASH_SIZE - 256) 256
+    {
+        * (.cy_app_signature)
+    }
+}
+
+
+; Emulated EEPROM Flash area
+LR_EM_EEPROM EM_EEPROM_START EM_EEPROM_SIZE
+{
+    .cy_em_eeprom +0
+    {
+        * (.cy_em_eeprom)
+    }
+}
+
+; Supervisory flash: User data
+LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
+{
+    .cy_sflash_user_data +0
+    {
+        * (.cy_sflash_user_data)
+    }
+}
+
+; Supervisory flash: Normal Access Restrictions (NAR)
+LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
+{
+    .cy_sflash_nar +0
+    {
+        * (.cy_sflash_nar)
+    }
+}
+
+; Supervisory flash: Public Key
+LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
+{
+    .cy_sflash_public_key +0
+    {
+        * (.cy_sflash_public_key)
+    }
+}
+
+; Supervisory flash: Table of Content # 2
+LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
+{
+    .cy_toc_part2 +0
+    {
+        * (.cy_toc_part2)
+    }
+}
+
+; Supervisory flash: Table of Content # 2 Copy
+LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
+{
+    .cy_rtoc_part2 +0
+    {
+        * (.cy_rtoc_part2)
+    }
+}
+
+
+; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
+LR_EROM XIP_START XIP_SIZE
+{
+    cy_xip +0
+    {
+        * (.cy_xip)
+    }
+}
+
+
+; eFuse
+LR_EFUSE EFUSE_START EFUSE_SIZE
+{
+    .cy_efuse +0
+    {
+        * (.cy_efuse)
+    }
+}
+
+
+; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
+CYMETA 0x90500000
+{
+    .cymeta +0 { * (.cymeta) }
+}
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+#define __cy_memory_0_start 0x10000000
+#define __cy_memory_0_length  0x00080000
+#define __cy_memory_0_row_size 0x200
+
+/* Emulated EEPROM Flash area */
+#define __cy_memory_1_start    0x14000000
+#define __cy_memory_1_length   0x8000
+#define __cy_memory_1_row_size 0x200
+
+/* Supervisory Flash */
+#define __cy_memory_2_start    0x16000000
+#define __cy_memory_2_length   0x8000
+#define __cy_memory_2_row_size 0x200
+
+/* XIP */
+#define __cy_memory_3_start    0x18000000
+#define __cy_memory_3_length   0x08000000
+#define __cy_memory_3_row_size 0x200
+
+/* eFuse */
+#define __cy_memory_4_start    0x90700000
+#define __cy_memory_4_length   0x100000
+#define __cy_memory_4_row_size 1
+
+
+/* [] END OF FILE */

bsp/Infineon/psoc6-cy8cproto-062S3-4343W/libs/TARGET_CY8CPROTO-062S3-4343W/COMPONENT_CM4/TOOLCHAIN_IAR/cy8c6xx5_cm4_dual.icf

@@ -1,247 +1,247 @@
-/*******************************************************************************
-* \file cy8c6xx5_cm4_dual.icf
-* \version 2.91
-*
-* Linker file for the IAR compiler.
-*
-* The main purpose of the linker script is to describe how the sections in the
-* input files should be mapped into the output file, and to control the memory
-* layout of the output file.
-*
-* \note The entry point is fixed and starts at 0x10000000. The valid application
-* image should be placed there.
-*
-* \note The linker files included with the PDL template projects must be generic
-* and handle all common use cases. Your project may not use every section
-* defined in the linker files. In that case you may see warnings during the
-* build process. In your project, you can simply comment out or remove the
-* relevant code in the linker file.
-*
-********************************************************************************
-* \copyright
-* Copyright 2016-2021 Cypress Semiconductor Corporation
-* SPDX-License-Identifier: Apache-2.0
-*
-* Licensed under the Apache License, Version 2.0 (the "License");
-* you may not use this file except in compliance with the License.
-* You may obtain a copy of the License at
-*
-*     http://www.apache.org/licenses/LICENSE-2.0
-*
-* Unless required by applicable law or agreed to in writing, software
-* distributed under the License is distributed on an "AS IS" BASIS,
-* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-* See the License for the specific language governing permissions and
-* limitations under the License.
-*******************************************************************************/
-
-/*###ICF### Section handled by ICF editor, don't touch! ****/
-/*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
-/*-Specials-*/
-define symbol __ICFEDIT_intvec_start__ = 0x00000000;
-
-/* The symbols below define the location and size of blocks of memory in the target.
- * Use these symbols to specify the memory regions available for allocation.
- */
-
-/* The following symbols control RAM and flash memory allocation for the CM4 core.
- * You can change the memory allocation by editing RAM and Flash symbols.
- * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
- * Using this memory region for other purposes will lead to unexpected behavior.
- * Your changes must be aligned with the corresponding symbols for CM0+ core in 'xx_cm0plus.icf',
- * where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.icf'.
- */
-/* RAM */
-define symbol __ICFEDIT_region_IRAM1_start__ = 0x08002000;
-define symbol __ICFEDIT_region_IRAM1_end__   = 0x0803F7FF;
-
-/* Flash */
-define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
-define symbol __ICFEDIT_region_IROM1_end__   = 0x1007FFFF;
-
-/* The following symbols define a 32K flash region used for EEPROM emulation.
- * This region can also be used as the general purpose flash.
- * You can assign sections to this memory region for only one of the cores.
- * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
- * Therefore, repurposing this memory region will prevent such middleware from operation.
- */
-define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
-define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
-
-/* The following symbols define device specific memory regions and must not be changed. */
-/* Supervisory FLASH - User Data */
-define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
-define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
-
-/* Supervisory FLASH - Normal Access Restrictions (NAR) */
-define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
-define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
-
-/* Supervisory FLASH - Public Key */
-define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
-define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
-
-/* Supervisory FLASH - Table of Content # 2 */
-define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
-define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
-
-/* Supervisory FLASH - Table of Content # 2 Copy */
-define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
-define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
-
-/* eFuse */
-define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
-define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
-
-/* XIP */
-define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
-define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
-
-define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
-define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
-define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
-
-
-define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
-define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
-define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
-/*-Sizes-*/
-if (!isdefinedsymbol(__STACK_SIZE)) {
-  define symbol __ICFEDIT_size_cstack__ = 0x1000;
-} else {
-  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
-}
-define symbol __ICFEDIT_size_proc_stack__ = 0x0;
-
-/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
-if (!isdefinedsymbol(__HEAP_SIZE)) {
-    define symbol __ICFEDIT_size_heap__ = 0x0400;
-} else {
-  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
-}
-/**** End of ICF editor section. ###ICF###*/
-
-/* By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
- * More about CM0+ prebuilt images, see here:
- * https://github.com/cypresssemiconductorco/psoc6cm0p
- */
-/* The size of the Cortex-M0+ application image */
-define symbol FLASH_CM0P_SIZE  = 0x2000;
-
-define memory mem with size = 4G;
-define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
-define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
-define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
-define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
-define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
-define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
-define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
-define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
-define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
-define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
-
-define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
-define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
-define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
-define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
-define block CM0P_RO with size = FLASH_CM0P_SIZE  { readonly section .cy_m0p_image };
-define block RO     {first section .intvec, readonly};
-
-define block cy_xip { section .cy_xip };
-
-/*-Initializations-*/
-initialize by copy { readwrite };
-do not initialize  { section .noinit, section .intvec_ram };
-
-/*-Placement-*/
-
-/* Flash - Cortex-M0+ application image */
-place at start of IROM1_region  { block CM0P_RO };
-
-/* Flash - Cortex-M4 application */
-place in          IROM1_region  { block RO };
-
-/* Used for the digital signature of the secure application and the Bootloader SDK application. */
-".cy_app_signature" : place at address (__ICFEDIT_region_IROM1_end__ - 0x200) { section .cy_app_signature };
-
-/* Emulated EEPROM Flash area */
-".cy_em_eeprom" : place at start of IROM2_region  { section .cy_em_eeprom };
-
-/* Supervisory Flash - User Data */
-".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
-
-/* Supervisory Flash - NAR */
-".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
-
-/* Supervisory Flash - Public Key */
-".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
-
-/* Supervisory Flash - TOC2 */
-".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
-
-/* Supervisory Flash - RTOC2 */
-".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
-
-/* eFuse */
-".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
-
-/* Execute in Place (XIP). See the smif driver documentation for details. */
-"cy_xip" : place at start of EROM1_region  { block cy_xip };
-
-/* RAM */
-place at start of IRAM1_region  { readwrite section .intvec_ram};
-place in          IRAM1_region  { readwrite };
-place at end   of IRAM1_region  { block HSTACK };
-
-/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
-".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
-
-
-keep {  section .cy_m0p_image,
-        section .cy_app_signature,
-        section .cy_em_eeprom,
-        section .cy_sflash_user_data,
-        section .cy_sflash_nar,
-        section .cy_sflash_public_key,
-        section .cy_toc_part2,
-        section .cy_rtoc_part2,
-        section .cy_efuse,
-        section .cy_xip,
-        section .cymeta,
-         };
-
-
-/* The following symbols used by the cymcuelftool. */
-/* Flash */
-define exported symbol __cy_memory_0_start    = 0x10000000;
-define exported symbol __cy_memory_0_length   = 0x00080000;
-define exported symbol __cy_memory_0_row_size = 0x200;
-
-/* Emulated EEPROM Flash area */
-define exported symbol __cy_memory_1_start    = 0x14000000;
-define exported symbol __cy_memory_1_length   = 0x8000;
-define exported symbol __cy_memory_1_row_size = 0x200;
-
-/* Supervisory Flash */
-define exported symbol __cy_memory_2_start    = 0x16000000;
-define exported symbol __cy_memory_2_length   = 0x8000;
-define exported symbol __cy_memory_2_row_size = 0x200;
-
-/* XIP */
-define exported symbol __cy_memory_3_start    = 0x18000000;
-define exported symbol __cy_memory_3_length   = 0x08000000;
-define exported symbol __cy_memory_3_row_size = 0x200;
-
-/* eFuse */
-define exported symbol __cy_memory_4_start    = 0x90700000;
-define exported symbol __cy_memory_4_length   = 0x100000;
-define exported symbol __cy_memory_4_row_size = 1;
-
-/* EOF */
+/*******************************************************************************
+* \file cy8c6xx5_cm4_dual.icf
+* \version 2.91
+*
+* Linker file for the IAR compiler.
+*
+* The main purpose of the linker script is to describe how the sections in the
+* input files should be mapped into the output file, and to control the memory
+* layout of the output file.
+*
+* \note The entry point is fixed and starts at 0x10000000. The valid application
+* image should be placed there.
+*
+* \note The linker files included with the PDL template projects must be generic
+* and handle all common use cases. Your project may not use every section
+* defined in the linker files. In that case you may see warnings during the
+* build process. In your project, you can simply comment out or remove the
+* relevant code in the linker file.
+*
+********************************************************************************
+* \copyright
+* Copyright 2016-2021 Cypress Semiconductor Corporation
+* SPDX-License-Identifier: Apache-2.0
+*
+* Licensed under the Apache License, Version 2.0 (the "License");
+* you may not use this file except in compliance with the License.
+* You may obtain a copy of the License at
+*
+*     http://www.apache.org/licenses/LICENSE-2.0
+*
+* Unless required by applicable law or agreed to in writing, software
+* distributed under the License is distributed on an "AS IS" BASIS,
+* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+* See the License for the specific language governing permissions and
+* limitations under the License.
+*******************************************************************************/
+
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_4.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+
+/* The symbols below define the location and size of blocks of memory in the target.
+ * Use these symbols to specify the memory regions available for allocation.
+ */
+
+/* The following symbols control RAM and flash memory allocation for the CM4 core.
+ * You can change the memory allocation by editing RAM and Flash symbols.
+ * Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
+ * Using this memory region for other purposes will lead to unexpected behavior.
+ * Your changes must be aligned with the corresponding symbols for CM0+ core in 'xx_cm0plus.icf',
+ * where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.icf'.
+ */
+/* RAM */
+define symbol __ICFEDIT_region_IRAM1_start__ = 0x08002000;
+define symbol __ICFEDIT_region_IRAM1_end__   = 0x0803F7FF;
+
+/* Flash */
+define symbol __ICFEDIT_region_IROM1_start__ = 0x10000000;
+define symbol __ICFEDIT_region_IROM1_end__   = 0x1007FFFF;
+
+/* The following symbols define a 32K flash region used for EEPROM emulation.
+ * This region can also be used as the general purpose flash.
+ * You can assign sections to this memory region for only one of the cores.
+ * Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
+ * Therefore, repurposing this memory region will prevent such middleware from operation.
+ */
+define symbol __ICFEDIT_region_IROM2_start__ = 0x14000000;
+define symbol __ICFEDIT_region_IROM2_end__   = 0x14007FFF;
+
+/* The following symbols define device specific memory regions and must not be changed. */
+/* Supervisory FLASH - User Data */
+define symbol __ICFEDIT_region_IROM3_start__ = 0x16000800;
+define symbol __ICFEDIT_region_IROM3_end__   = 0x16000FFF;
+
+/* Supervisory FLASH - Normal Access Restrictions (NAR) */
+define symbol __ICFEDIT_region_IROM4_start__ = 0x16001A00;
+define symbol __ICFEDIT_region_IROM4_end__   = 0x16001BFF;
+
+/* Supervisory FLASH - Public Key */
+define symbol __ICFEDIT_region_IROM5_start__ = 0x16005A00;
+define symbol __ICFEDIT_region_IROM5_end__   = 0x160065FF;
+
+/* Supervisory FLASH - Table of Content # 2 */
+define symbol __ICFEDIT_region_IROM6_start__ = 0x16007C00;
+define symbol __ICFEDIT_region_IROM6_end__   = 0x16007DFF;
+
+/* Supervisory FLASH - Table of Content # 2 Copy */
+define symbol __ICFEDIT_region_IROM7_start__ = 0x16007E00;
+define symbol __ICFEDIT_region_IROM7_end__   = 0x16007FFF;
+
+/* eFuse */
+define symbol __ICFEDIT_region_IROM8_start__ = 0x90700000;
+define symbol __ICFEDIT_region_IROM8_end__   = 0x907FFFFF;
+
+/* XIP */
+define symbol __ICFEDIT_region_EROM1_start__ = 0x18000000;
+define symbol __ICFEDIT_region_EROM1_end__   = 0x1FFFFFFF;
+
+define symbol __ICFEDIT_region_EROM2_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM2_end__   = 0x0;
+define symbol __ICFEDIT_region_EROM3_start__ = 0x0;
+define symbol __ICFEDIT_region_EROM3_end__   = 0x0;
+
+
+define symbol __ICFEDIT_region_IRAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_IRAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM1_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM1_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM2_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM2_end__   = 0x0;
+define symbol __ICFEDIT_region_ERAM3_start__ = 0x0;
+define symbol __ICFEDIT_region_ERAM3_end__   = 0x0;
+/*-Sizes-*/
+if (!isdefinedsymbol(__STACK_SIZE)) {
+  define symbol __ICFEDIT_size_cstack__ = 0x1000;
+} else {
+  define symbol __ICFEDIT_size_cstack__ = __STACK_SIZE;
+}
+define symbol __ICFEDIT_size_proc_stack__ = 0x0;
+
+/* Defines the minimum heap size. The actual heap size will be expanded to the end of the stack region */
+if (!isdefinedsymbol(__HEAP_SIZE)) {
+    define symbol __ICFEDIT_size_heap__ = 0x0400;
+} else {
+  define symbol __ICFEDIT_size_heap__ = __HEAP_SIZE;
+}
+/**** End of ICF editor section. ###ICF###*/
+
+/* By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
+ * More about CM0+ prebuilt images, see here:
+ * https://github.com/cypresssemiconductorco/psoc6cm0p
+ */
+/* The size of the Cortex-M0+ application image */
+define symbol FLASH_CM0P_SIZE  = 0x2000;
+
+define memory mem with size = 4G;
+define region IROM1_region = mem:[from __ICFEDIT_region_IROM1_start__ to __ICFEDIT_region_IROM1_end__];
+define region IROM2_region = mem:[from __ICFEDIT_region_IROM2_start__ to __ICFEDIT_region_IROM2_end__];
+define region IROM3_region = mem:[from __ICFEDIT_region_IROM3_start__ to __ICFEDIT_region_IROM3_end__];
+define region IROM4_region = mem:[from __ICFEDIT_region_IROM4_start__ to __ICFEDIT_region_IROM4_end__];
+define region IROM5_region = mem:[from __ICFEDIT_region_IROM5_start__ to __ICFEDIT_region_IROM5_end__];
+define region IROM6_region = mem:[from __ICFEDIT_region_IROM6_start__ to __ICFEDIT_region_IROM6_end__];
+define region IROM7_region = mem:[from __ICFEDIT_region_IROM7_start__ to __ICFEDIT_region_IROM7_end__];
+define region IROM8_region = mem:[from __ICFEDIT_region_IROM8_start__ to __ICFEDIT_region_IROM8_end__];
+define region EROM1_region = mem:[from __ICFEDIT_region_EROM1_start__ to __ICFEDIT_region_EROM1_end__];
+define region IRAM1_region = mem:[from __ICFEDIT_region_IRAM1_start__ to __ICFEDIT_region_IRAM1_end__];
+
+define block CSTACK     with alignment = 8, size = __ICFEDIT_size_cstack__     { };
+define block PROC_STACK with alignment = 8, size = __ICFEDIT_size_proc_stack__ { };
+define block HEAP       with expanding size, alignment = 8, minimum size = __ICFEDIT_size_heap__ { };
+define block HSTACK {block HEAP, block PROC_STACK, last block CSTACK};
+define block CM0P_RO with size = FLASH_CM0P_SIZE  { readonly section .cy_m0p_image };
+define block RO     {first section .intvec, readonly};
+
+define block cy_xip { section .cy_xip };
+
+/*-Initializations-*/
+initialize by copy { readwrite };
+do not initialize  { section .noinit, section .intvec_ram };
+
+/*-Placement-*/
+
+/* Flash - Cortex-M0+ application image */
+place at start of IROM1_region  { block CM0P_RO };
+
+/* Flash - Cortex-M4 application */
+place in          IROM1_region  { block RO };
+
+/* Used for the digital signature of the secure application and the Bootloader SDK application. */
+".cy_app_signature" : place at address (__ICFEDIT_region_IROM1_end__ - 0x200) { section .cy_app_signature };
+
+/* Emulated EEPROM Flash area */
+".cy_em_eeprom" : place at start of IROM2_region  { section .cy_em_eeprom };
+
+/* Supervisory Flash - User Data */
+".cy_sflash_user_data" : place at start of IROM3_region  { section .cy_sflash_user_data };
+
+/* Supervisory Flash - NAR */
+".cy_sflash_nar" : place at start of IROM4_region  { section .cy_sflash_nar };
+
+/* Supervisory Flash - Public Key */
+".cy_sflash_public_key" : place at start of IROM5_region  { section .cy_sflash_public_key };
+
+/* Supervisory Flash - TOC2 */
+".cy_toc_part2" : place at start of IROM6_region  { section .cy_toc_part2 };
+
+/* Supervisory Flash - RTOC2 */
+".cy_rtoc_part2" : place at start of IROM7_region  { section .cy_rtoc_part2 };
+
+/* eFuse */
+".cy_efuse" : place at start of IROM8_region  { section .cy_efuse };
+
+/* Execute in Place (XIP). See the smif driver documentation for details. */
+"cy_xip" : place at start of EROM1_region  { block cy_xip };
+
+/* RAM */
+place at start of IRAM1_region  { readwrite section .intvec_ram};
+place in          IRAM1_region  { readwrite };
+place at end   of IRAM1_region  { block HSTACK };
+
+/* These sections are used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage. */
+".cymeta" : place at address mem : 0x90500000 { readonly section .cymeta };
+
+
+keep {  section .cy_m0p_image,
+        section .cy_app_signature,
+        section .cy_em_eeprom,
+        section .cy_sflash_user_data,
+        section .cy_sflash_nar,
+        section .cy_sflash_public_key,
+        section .cy_toc_part2,
+        section .cy_rtoc_part2,
+        section .cy_efuse,
+        section .cy_xip,
+        section .cymeta,
+         };
+
+
+/* The following symbols used by the cymcuelftool. */
+/* Flash */
+define exported symbol __cy_memory_0_start    = 0x10000000;
+define exported symbol __cy_memory_0_length   = 0x00080000;
+define exported symbol __cy_memory_0_row_size = 0x200;
+
+/* Emulated EEPROM Flash area */
+define exported symbol __cy_memory_1_start    = 0x14000000;
+define exported symbol __cy_memory_1_length   = 0x8000;
+define exported symbol __cy_memory_1_row_size = 0x200;
+
+/* Supervisory Flash */
+define exported symbol __cy_memory_2_start    = 0x16000000;
+define exported symbol __cy_memory_2_length   = 0x8000;
+define exported symbol __cy_memory_2_row_size = 0x200;
+
+/* XIP */
+define exported symbol __cy_memory_3_start    = 0x18000000;
+define exported symbol __cy_memory_3_length   = 0x08000000;
+define exported symbol __cy_memory_3_row_size = 0x200;
+
+/* eFuse */
+define exported symbol __cy_memory_4_start    = 0x90700000;
+define exported symbol __cy_memory_4_length   = 0x100000;
+define exported symbol __cy_memory_4_row_size = 1;
+
+/* EOF */

bsp/apm32/apm32f103xe-minibroard/board/linker_scripts/link.lds

@@ -94,7 +94,7 @@ SECTIONS
         _end_address_data = .;
     } >RAM
 
-    .stack : 
+    .stack :
     {
         . = ALIGN(4);
         _sstack = .;

bsp/at32/libraries/AT32F421_Firmware_Library/cmsis/cm4/device_support/startup/iar/linker/AT32F421x4.icf

@@ -27,4 +27,4 @@ place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
 
 place in ROM_region   { readonly };
 place in RAM_region   { readwrite,
-                        block CSTACK, block HEAP };
+                        block CSTACK, block HEAP };

bsp/at32/libraries/AT32F421_Firmware_Library/cmsis/cm4/device_support/startup/iar/linker/AT32F421x6.icf

@@ -27,4 +27,4 @@ place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
 
 place in ROM_region   { readonly };
 place in RAM_region   { readwrite,
-                        block CSTACK, block HEAP };
+                        block CSTACK, block HEAP };

bsp/at32/libraries/AT32F421_Firmware_Library/cmsis/cm4/device_support/startup/iar/linker/AT32F421x8.icf

@@ -27,4 +27,4 @@ place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
 
 place in ROM_region   { readonly };
 place in RAM_region   { readwrite,
-                        block CSTACK, block HEAP };
+                        block CSTACK, block HEAP };

bsp/at32/libraries/AT32F425_Firmware_Library/cmsis/cm4/device_support/startup/iar/linker/AT32F425x4.icf

@@ -27,4 +27,4 @@ place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
 
 place in ROM_region   { readonly };
 place in RAM_region   { readwrite,
-                        block CSTACK, block HEAP };
+                        block CSTACK, block HEAP };

bsp/at32/libraries/AT32F425_Firmware_Library/cmsis/cm4/device_support/startup/iar/linker/AT32F425x6.icf

@@ -27,4 +27,4 @@ place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
 
 place in ROM_region   { readonly };
 place in RAM_region   { readwrite,
-                        block CSTACK, block HEAP };
+                        block CSTACK, block HEAP };

bsp/at32/libraries/AT32F425_Firmware_Library/cmsis/cm4/device_support/startup/iar/linker/AT32F425x8.icf

@@ -27,4 +27,4 @@ place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
 
 place in ROM_region   { readonly };
 place in RAM_region   { readwrite,
-                        block CSTACK, block HEAP };
+                        block CSTACK, block HEAP };

bsp/imxrt/imxrt1060-nxp-evk/board/linker_scripts/link.icf

@@ -108,4 +108,4 @@ place in DATA_region                        { last block HEAP };
 place in DATA_region                        { block NCACHE_VAR };
 place in CSTACK_region                      { block CSTACK };
 place in QACODE_region                      { block QACCESS_CODE };
-place in DATA_region                        { block QACCESS_DATA };
+place in DATA_region                        { block QACCESS_DATA };

bsp/stm32/stm32f401-weact-blackpill/board/linker_scripts/link.lds

@@ -91,7 +91,7 @@ SECTIONS
         _edata = . ;
     } >RAM
 
-    .stack : 
+    .stack :
     {
         . = ALIGN(4);
         _sstack = .;
@@ -114,7 +114,7 @@ SECTIONS
         . = ALIGN(4);
         /* This is used by the startup in order to initialize the .bss secion */
         _ebss = . ;
-        
+
         *(.bss.init)
     } > RAM
     __bss_end = .;