[bsp][Infineon]fix i2c init error (#7817)

添加iic4的配置，将初始化错误断言部分修改为打印方式

bsp/Infineon/libraries/HAL_Drivers/drv_i2c.c

@@ -11,9 +11,18 @@
 #include "board.h"
 
 #if defined(RT_USING_I2C)
-#if defined(BSP_USING_HW_I2C3) || defined(BSP_USING_HW_I2C4) || defined(BSP_USING_HW_I2C6)
+#if defined(BSP_USING_HW_I2C2) || defined(BSP_USING_HW_I2C3) || defined(BSP_USING_HW_I2C4)|| defined(BSP_USING_HW_I2C6)
 #include <rtdevice.h>
 
+#ifndef I2C2_CONFIG
+#define I2C2_CONFIG                  \
+    {                                \
+        .name = "i2c2",              \
+        .scl_pin = BSP_I2C2_SCL_PIN, \
+        .sda_pin = BSP_I2C2_SDA_PIN, \
+    }
+#endif /* I2C2_CONFIG */
+
 #ifndef I2C3_CONFIG
 #define I2C3_CONFIG                  \
     {                                \
@@ -40,11 +49,13 @@
         .sda_pin = BSP_I2C6_SDA_PIN, \
     }
 #endif /* I2C6_CONFIG */
-
 #endif /* defined(BSP_USING_I2C1) || defined(BSP_USING_I2C2) */
 
 enum
 {
+#ifdef BSP_USING_HW_I2C2
+    I2C2_INDEX,
+#endif
 #ifdef BSP_USING_HW_I2C3
     I2C3_INDEX,
 #endif
@@ -72,17 +83,21 @@ struct ifx_i2c
 };
 
 static struct ifx_i2c_config i2c_config[] =
-    {
+{
+#ifdef BSP_USING_HW_I2C2
+    I2C2_CONFIG,
+#endif
+
 #ifdef BSP_USING_HW_I2C3
-        I2C3_CONFIG,
+    I2C3_CONFIG,
 #endif
 
 #ifdef BSP_USING_HW_I2C4
-        I2C4_CONFIG,
+    I2C4_CONFIG,
 #endif
 
 #ifdef BSP_USING_HW_I2C6
-        I2C6_CONFIG,
+    I2C6_CONFIG,
 #endif
 };
 
@@ -145,20 +160,29 @@ out:
 }
 
 static const struct rt_i2c_bus_device_ops i2c_ops =
-    {
-        _i2c_xfer,
-        RT_NULL,
-        RT_NULL};
+{
+    _i2c_xfer,
+    RT_NULL,
+    RT_NULL
+};
 
 void HAL_I2C_Init(struct ifx_i2c *obj)
 {
-    rt_uint8_t result = RT_EOK;
+    cy_rslt_t result = CY_RSLT_SUCCESS;
 
     result = cyhal_i2c_init(&obj->mI2C, obj->config->sda_pin, obj->config->scl_pin, NULL);
-    RT_ASSERT(result == RT_EOK);
+    if (result != CY_RSLT_SUCCESS)
+    {
+        rt_kprintf("hal i2c init fail!\n");
+        return;
+    }
 
     result = cyhal_i2c_configure(&obj->mI2C, &obj->mI2C_cfg);
-    RT_ASSERT(result == RT_EOK);
+    if (result != CY_RSLT_SUCCESS)
+    {
+        rt_kprintf("hal i2c configure fail!\n");
+        return;
+    }
 }
 
 int rt_hw_i2c_init(void)

bsp/Infineon/psoc6-evaluationkit-062S2/board/Kconfig

@@ -14,6 +14,7 @@ menu "Onboard Peripheral Drivers"
         select BSP_USING_UART
         select BSP_USING_UART6
         default y
+        
 endmenu
 
 menu "On-chip Peripheral Drivers"
@@ -141,19 +142,19 @@ menu "On-chip Peripheral Drivers"
         select RT_USING_I2C
         select RT_USING_PIN
         if BSP_USING_HW_I2C
-            config BSP_USING_HW_I2C3
-                bool "Enable I2C3 Bus (User I2C)"
+            config BSP_USING_HW_I2C2
+                bool "Enable I2C2 Bus (User I2C)"
                 default n
-                if BSP_USING_HW_I2C3
-                    comment "Notice: P6_0 --> 48; P6_1 --> 49"
-                    config BSP_I2C3_SCL_PIN
-                        int "i2c3 SCL pin number"
+                if BSP_USING_HW_I2C2
+                    comment "Notice: P3_0 --> 24; P3_1 --> 25"
+                    config BSP_I2C2_SCL_PIN
+                        int "i2c2 SCL pin number"
                         range 1 113
-                        default 48
-                    config BSP_I2C3_SDA_PIN
-                        int "i2c3 SDA pin number"
+                        default 24
+                    config BSP_I2C2_SDA_PIN
+                        int "i2c2 SDA pin number"
                         range 1 113
-                        default 49
+                        default 25
                 endif
             config BSP_USING_HW_I2C4
                 bool "Enable I2C4 Bus (Arduino I2C)"
@@ -169,20 +170,6 @@ menu "On-chip Peripheral Drivers"
                         range 1 113
                         default 65
                 endif
-            config BSP_USING_HW_I2C6
-                bool "Enable I2C6 Bus (User I2C)"
-                default n
-                if BSP_USING_HW_I2C6
-                    comment "Notice: P13_0 --> 48; P13_1 --> 49"
-                    config BSP_I2C6_SCL_PIN
-                        int "i2c6 SCL pin number"
-                        range 1 113
-                        default 104
-                    config BSP_I2C6_SDA_PIN
-                        int "i2c6 SDA pin number"
-                        range 1 113
-                        default 105
-                endif
         endif
 
     menuconfig BSP_USING_I2C

bsp/Infineon/psoc6-evaluationkit-062S2/board/board.h

@@ -39,7 +39,7 @@
 #define IFX_EFLASH_END_ADDRESS          ((uint32_t)(IFX_EFLASH_START_ADRESS + IFX_EFLASH_SIZE))
 
 /*SRAM CONFIG*/
-#define IFX_SRAM_SIZE                   (1013)
+#define IFX_SRAM_SIZE                   (1010)
 #define IFX_SRAM_END                    (0x08002000 + IFX_SRAM_SIZE * 1024)
 
 #ifdef __ARMCC_VERSION