Merge pull request #580 from zchong-cht/master

[BSP] Add iar compiler support for am335x.

bsp/beaglebone/AM335x_sk_DDR3.mac

@@ -0,0 +1,551 @@
+// -----------------------------------------------------------------------
+// This file contains the initial set up configuration for the AM335x.
+//-------------------------------------------------------------------------
+
+__var clk_in;
+
+CHGBIT (addr, mask, data)
+{
+__var reg;
+	reg  = __readMemory32(addr, "Memory");
+	reg &= ~mask;
+	reg |=  data;
+  __writeMemory32(reg, addr, "Memory");
+}
+
+CLRBIT (addr, mask)
+{
+__var reg;
+	reg  = __readMemory32(addr, "Memory");
+	reg &= ~mask;
+  __writeMemory32(reg, addr, "Memory");
+}
+
+SETBIT (addr, mask)
+{
+__var reg;
+	reg  = __readMemory32(addr, "Memory");
+	reg |= mask;
+  __writeMemory32(reg, addr, "Memory");
+}
+
+TESTBIT (addr, mask)
+{
+	return(__readMemory32(addr, "Memory") & mask);
+}
+
+
+get_input_clock_frequency()
+{
+	__var temp;
+	
+	temp = __readMemory32(((0x44E10000) + 0x40), "Memory");
+	temp = temp >> 22;
+        temp = temp & 0x3;
+
+	if(temp == 0)
+	{	
+		clk_in = 19;  //19.2MHz
+		__message "Input Clock Read from SYSBOOT[15:14]:  19.2MHz\n";
+	}	
+	if(temp == 1)
+	{
+		clk_in = 24;  //24MHz
+		__message "Input Clock Read from SYSBOOT[15:14]:  24MHz\n";
+	}	
+	if(temp == 2)
+	{
+		clk_in = 25;  //25MHz
+		__message "Input Clock Read from SYSBOOT[15:14]:  25MHz\n";
+	}	
+	if(temp == 3)
+	{ 
+		clk_in = 26;  //26MHz
+		__message "Input Clock Read from SYSBOOT[15:14]:  26MHz\n";
+	}	
+}
+
+mpu_pll_config( clk_in,  N,  M,  M2)
+{
+	__var ref_clk,clk_out;
+	__var clkmode,clksel,div_m2,idlest_dpll;
+	__var temp,i;
+
+	ref_clk     = clk_in/(N+1);
+	clk_out     = (ref_clk*M)/M2;
+
+	clkmode=__readMemory32((0x44E00000 + 0x488), "Memory");
+	clksel= __readMemory32((0x44E00000 + 0x42C), "Memory");
+	div_m2= __readMemory32((0x44E00000 + 0x4A8), "Memory");
+
+	__message "****  Going to Bypass... \n";
+
+	//put the DPLL in bypass mode
+	__writeMemory32(0x4, (0x44E00000 + 0x488), "Memory");
+
+	while(((__readMemory32((0x44E00000 + 0x420), "Memory") & 0x101) != 0x00000100)); //wait for bypass status
+
+	__message "****  Bypassed, changing values... \n";
+
+	//set multiply and divide values
+	clksel = clksel & (~0x7FFFF);
+	clksel = clksel | ((M <<0x8) | N);
+	__writeMemory32(clksel, (0x44E00000 + 0x42C), "Memory");
+	div_m2 = div_m2 & ~0x1F;
+	div_m2 = div_m2 | M2;  
+	__writeMemory32(div_m2, (0x44E00000 + 0x4A8), "Memory");
+
+	__message "****  Locking ARM PLL\n";
+
+	//now lock the DPLL
+	clkmode = clkmode | 0x7;  //enables lock mode
+	__writeMemory32(clkmode, (0x44E00000 + 0x488), "Memory");
+	while(((__readMemory32((0x44E00000 + 0x420), "Memory") & 0x101) != 0x1)); //wait for lock
+}
+
+
+core_pll_config( clk_in,  N,  M,  M4,  M5,  M6)
+{
+	__var ref_clk,clk_out4,clk_out5,clk_out6;
+	__var clkmode,clksel,div_m4,div_m5,div_m6,idlest_dpll;
+
+	ref_clk     = clk_in/(N+1);
+	clk_out4     = (ref_clk*M)/M4;  //M4=200MHz
+	clk_out5     = (ref_clk*M)/M5;  //M5=250MHz
+	clk_out6     = (ref_clk*M)/M6;  //M6=500MHz
+
+	clkmode= __readMemory32((0x44E00000 + 0x490), "Memory");
+	clksel= __readMemory32((0x44E00000 + 0x468), "Memory");
+	div_m4= __readMemory32((0x44E00000 + 0x480), "Memory"); 
+	div_m5= __readMemory32((0x44E00000 + 0x484), "Memory"); 
+	div_m6= __readMemory32((0x44E00000 + 0x4D8), "Memory"); 
+
+	//put DPLL in bypass mode
+	clkmode = (clkmode & 0xfffffff8)|0x00000004;
+	__writeMemory32(clkmode, (0x44E00000 + 0x490), "Memory");
+	while((__readMemory32((0x44E00000 + 0x45C),  "Memory") & 0x00000100 )!=0x00000100); //wait for bypass status
+
+	__message "****  Core Bypassed\n";
+
+	//set multiply and divide values
+	clksel = clksel & (~0x7FFFF);
+	clksel = clksel | ((M <<0x8) | N);
+	__writeMemory32(clksel, (0x44E00000 + 0x468), "Memory");
+	div_m4= M4;   //200MHz
+	__writeMemory32(div_m4, (0x44E00000 + 0x480), "Memory");
+	div_m5=  M5;  //250MHz
+	__writeMemory32(div_m5, (0x44E00000 + 0x484), "Memory");
+	div_m6=  M6;  //500MHz
+	__writeMemory32(div_m6, (0x44E00000 + 0x4D8), "Memory");
+
+	__message "****  Now locking Core...\n";
+
+	//now lock the PLL
+	clkmode =(clkmode&0xfffffff8)|0x00000007;
+	__writeMemory32(clkmode, (0x44E00000 + 0x490), "Memory");
+
+	while((__readMemory32((0x44E00000 + 0x45C), "Memory") & 0x00000001 )!=0x00000001);
+	__message "****  Core locked\n";
+}
+
+ddr_pll_config( clk_in,  N,  M,  M2)
+{
+	__var ref_clk,clk_out ;
+	__var clkmode,clksel,div_m2,idlest_dpll;                
+
+	ref_clk     = clk_in/(N+1);
+	clk_out     = (ref_clk*M)/M2;
+
+	clkmode=__readMemory32((0x44E00000 + 0x494), "Memory");
+	clksel= __readMemory32((0x44E00000 + 0x440), "Memory");
+	div_m2= __readMemory32((0x44E00000 + 0x4A0), "Memory");
+
+	clkmode =(clkmode&0xfffffff8)|0x00000004;
+	__writeMemory32(clkmode, (0x44E00000 + 0x494), "Memory");
+	while((__readMemory32((0x44E00000 + 0x434), "Memory") & 0x00000100 )!=0x00000100);
+
+	__message "****  DDR DPLL Bypassed\n";
+
+	clksel = clksel & (~0x7FFFF);
+	clksel = clksel | ((M <<0x8) | N);
+	__writeMemory32(clksel, (0x44E00000 + 0x440), "Memory");
+	div_m2 = __readMemory32((0x44E00000 + 0x4A0), "Memory");
+	div_m2 = (div_m2&0xFFFFFFE0) | M2;
+	__writeMemory32(div_m2, (0x44E00000 + 0x4A0), "Memory");
+	clkmode =(clkmode&0xfffffff8)|0x00000007;
+	__writeMemory32(clkmode, (0x44E00000 + 0x494), "Memory");
+
+	while((__readMemory32((0x44E00000 + 0x434), "Memory") & 0x00000001 )!=0x00000001);
+
+	__message "****  DDR DPLL Locked\n";
+}
+
+per_pll_config( clk_in,  N,  M,  M2)
+{
+	__var ref_clk,clk_out;
+	__var clkmode,clksel,div_m2,idlest_dpll;
+
+	ref_clk     = clk_in/(N+1);
+	clk_out     = (ref_clk*M)/M2;
+
+	clkmode=__readMemory32((0x44E00000 + 0x48C), "Memory");
+	clksel= __readMemory32((0x44E00000 + 0x49C), "Memory");
+	div_m2= __readMemory32((0x44E00000 + 0x4AC), "Memory");
+
+	clkmode =(clkmode&0xfffffff8)|0x00000004;
+	__writeMemory32(clkmode, (0x44E00000 + 0x48C), "Memory");
+	while((__readMemory32((0x44E00000 + 0x470), "Memory") & 0x00000100 )!=0x00000100);
+
+	__message "****  PER DPLL Bypassed\n";
+
+	clksel = clksel & (~0x7FFFF);
+	clksel = clksel | ((M <<0x8) | N);
+	__writeMemory32(clksel, (0x44E00000 + 0x49C), "Memory");
+	div_m2= 0xFFFFFF80 | M2;
+	__writeMemory32(div_m2, (0x44E00000 + 0x4AC), "Memory");
+	clkmode =(clkmode&0xfffffff8)|0x00000007;
+	__writeMemory32(clkmode,(0x44E00000 + 0x48C), "Memory");
+
+	while((__readMemory32((0x44E00000 + 0x470), "Memory") & 0x00000001 )!=0x00000001);
+
+	__message "****  PER DPLL Locked\n";
+}
+
+disp_pll_config( clk_in,  N,  M,  M2)
+{
+	__var ref_clk,clk_out;
+	__var clkmode,clksel,div_m2,idlest_dpll;
+
+	__message "****  DISP PLL Config is in progress .......... \n";	
+
+	ref_clk     = clk_in/(N+1);
+	clk_out     = (ref_clk*M)/M2;
+
+	clkmode=__readMemory32((0x44E00000 + 0x498), "Memory");
+	clksel= __readMemory32((0x44E00000 + 0x454), "Memory");
+	div_m2= __readMemory32((0x44E00000 + 0x4A4), "Memory");
+
+	clkmode =(clkmode&0xfffffff8)|0x00000004;
+	__writeMemory32(clkmode, (0x44E00000 + 0x498), "Memory");
+	while((__readMemory32((0x44E00000 + 0x448), "Memory") & 0x00000100 )!=0x00000100);
+
+	clksel = clksel & (~0x7FFFF);
+	clksel = clksel | ((M <<0x8) | N);
+	__writeMemory32(clksel, (0x44E00000 + 0x454), "Memory");
+	div_m2= 0xFFFFFFE0 | M2;
+	__writeMemory32(div_m2, (0x44E00000 + 0x4A4), "Memory");
+	clkmode =(clkmode&0xfffffff8)|0x00000007;
+	__writeMemory32(clkmode, (0x44E00000 + 0x498), "Memory");
+
+	while((__readMemory32((0x44E00000 + 0x448), "Memory") & 0x00000001 )!=0x00000001);
+
+	__message "****  DISP PLL Config is DONE .......... \n";
+}
+
+arm_opp120_config()
+{
+	__message "****  Subarctic ALL ADPLL Config for OPP == OPP100 is In Progress ......... \n";
+    get_input_clock_frequency();
+
+    if (clk_in == 24)
+	{
+		mpu_pll_config(clk_in, 23, 550, 1);
+		core_pll_config(clk_in, 23, 1000, 10, 8, 4);
+		ddr_pll_config(clk_in, 23, 303, 1);
+		per_pll_config(clk_in, 23, 960, 5);
+		disp_pll_config(clk_in, 23, 48, 1);
+		__message "****  Subarctic ALL ADPLL Config for OPP == OPP100 is Done ......... \n";
+	}
+    else
+    {
+		__message "****  Subarctic PLL Config failed!!  Check SYSBOOT[15:14] for proper input freq config \n";
+    }
+
+}
+
+
+emif_prcm_clk_enable()
+{
+	   __message "EMIF PRCM is in progress ....... \n";
+
+   	   __writeMemory32(0x2, (0x44E00000 + 0x0D0), "Memory");
+       __writeMemory32(0x2, (0x44E00000 + 0x028), "Memory");
+   	   while(__readMemory32((0x44E00000 + 0x028), "Memory")!= 0x02);
+
+	   __message "EMIF PRCM Done \n";
+}
+
+vtp_enable()
+{
+      /* Write 1 to enable VTP */
+      __writeMemory32((__readMemory32(((0x44E10000) + 0x0E0C), "Memory") | 0x00000040),((0x44E10000) + 0x0E0C) , "Memory");
+      /* Write 0 to CLRZ bit */
+	  __writeMemory32((__readMemory32(((0x44E10000) + 0x0E0C), "Memory") & 0xFFFFFFFE),((0x44E10000) + 0x0E0C) ,"Memory");
+      /* Write 1 to CLRZ bit */
+      __writeMemory32((__readMemory32(((0x44E10000) + 0x0E0C), "Memory") | 0x00000001),((0x44E10000) + 0x0E0C) , "Memory");
+	  __message "Waiting for VTP Ready .......\n";
+	  while((__readMemory32(((0x44E10000) + 0x0E0C), "Memory") & 0x00000020) != 0x00000020);	 
+
+           __message "VTP Enable Done \n";
+}
+
+cmd_macro_config( REG_PHY_CTRL_SLAVE_RATIO_value, CMD_REG_PHY_CTRL_SLAVE_FORCE_value, CMD_REG_PHY_CTRL_SLAVE_DELAY_value, PHY_DLL_LOCK_DIFF_value, CMD_PHY_INVERT_CLKOUT_value)
+{
+	   __message "\DDR PHY CMD0 Register configuration is in progress ....... \n";
+
+	   __writeMemory32(REG_PHY_CTRL_SLAVE_RATIO_value, (0x01C + (0x44E12000)), "Memory");		     	
+       __writeMemory32(CMD_REG_PHY_CTRL_SLAVE_FORCE_value, (0x020 + (0x44E12000)), "Memory");                   	
+       __writeMemory32(CMD_REG_PHY_CTRL_SLAVE_DELAY_value, (0x024 + (0x44E12000)), "Memory");                   	
+	   __writeMemory32(PHY_DLL_LOCK_DIFF_value, (0x028 + (0x44E12000)), "Memory");   	             	
+	   __writeMemory32(CMD_PHY_INVERT_CLKOUT_value, (0x02C + (0x44E12000)), "Memory");
+
+	   __message "\DDR PHY CMD1 Register configuration is in progress ....... \n";
+
+	   __writeMemory32(REG_PHY_CTRL_SLAVE_RATIO_value, (0x050 + (0x44E12000)), "Memory");		     	
+       __writeMemory32(CMD_REG_PHY_CTRL_SLAVE_FORCE_value, (0x054 + (0x44E12000)), "Memory");                   	
+       __writeMemory32(CMD_REG_PHY_CTRL_SLAVE_DELAY_value, (0x058 + (0x44E12000)), "Memory");                   	
+	   __writeMemory32(PHY_DLL_LOCK_DIFF_value, (0x05C + (0x44E12000)), "Memory");   	             	
+	   __writeMemory32(CMD_PHY_INVERT_CLKOUT_value, (0x060 + (0x44E12000)), "Memory");
+
+	   __message "\DDR PHY CMD2 Register configuration is in progress ....... \n";
+
+	   __writeMemory32(REG_PHY_CTRL_SLAVE_RATIO_value, (0x084 + (0x44E12000)), "Memory");		     	
+       __writeMemory32(CMD_REG_PHY_CTRL_SLAVE_FORCE_value, (0x088 + (0x44E12000)), "Memory");                   	
+       __writeMemory32(CMD_REG_PHY_CTRL_SLAVE_DELAY_value, (0x08C + (0x44E12000)), "Memory");                   	
+	   __writeMemory32(PHY_DLL_LOCK_DIFF_value, (0x090 + (0x44E12000)), "Memory");   	             	
+	   __writeMemory32(CMD_PHY_INVERT_CLKOUT_value, (0x094 + (0x44E12000)), "Memory"); 	             	
+}
+
+data_macro_config( dataMacroNum, PHY_RD_DQS_SLAVE_RATIO_value, PHY_WR_DQS_SLAVE_RATIO_value, REG_PHY_WRLVL_INIT_RATIO_value,
+		   REG_PHY_GATELVL_INIT_RATIO_value, REG_PHY_FIFO_WE_SLAVE_RATIO_value, REG_PHY_WR_DATA_SLAVE_RATIO_value)
+{
+        __var offset;
+	if(dataMacroNum == 0)
+	{
+		offset = 0x00;
+		__message "DDR PHY DATA0 Register configuration is in progress ....... \n";
+	}
+	else if(dataMacroNum == 1)
+	{
+		offset = 0xA4;
+		__message "DDR PHY DATA1 Register configuration is in progress ....... \n";
+	}	  
+	
+	__writeMemory32(((PHY_RD_DQS_SLAVE_RATIO_value<<30)|(PHY_RD_DQS_SLAVE_RATIO_value<<20)|(PHY_RD_DQS_SLAVE_RATIO_value<<10)|(PHY_RD_DQS_SLAVE_RATIO_value<<0)), ((0x0C8 + (0x44E12000)) + offset), "Memory");
+	__writeMemory32(PHY_RD_DQS_SLAVE_RATIO_value>>2, ((0x0CC + (0x44E12000)) + offset), "Memory");
+
+    __writeMemory32(((PHY_WR_DQS_SLAVE_RATIO_value<<30)|(PHY_WR_DQS_SLAVE_RATIO_value<<20)|(PHY_WR_DQS_SLAVE_RATIO_value<<10)|(PHY_WR_DQS_SLAVE_RATIO_value<<0)), ((0x0DC + (0x44E12000)) + offset), "Memory");
+	__writeMemory32(PHY_WR_DQS_SLAVE_RATIO_value>>2, ((0x0E0 + (0x44E12000)) + offset), "Memory");
+
+	__writeMemory32(((REG_PHY_WRLVL_INIT_RATIO_value<<30)|(REG_PHY_WRLVL_INIT_RATIO_value<<20)|(REG_PHY_WRLVL_INIT_RATIO_value<<10)|(REG_PHY_WRLVL_INIT_RATIO_value<<0)), ((0x0F0 + (0x44E12000)) + offset), "Memory");
+	__writeMemory32(REG_PHY_WRLVL_INIT_RATIO_value>>2, ((0x0F4 + (0x44E12000)) + offset), "Memory");
+
+    __writeMemory32(((REG_PHY_GATELVL_INIT_RATIO_value<<30)|(REG_PHY_GATELVL_INIT_RATIO_value<<20)|(REG_PHY_GATELVL_INIT_RATIO_value<<10)|(REG_PHY_GATELVL_INIT_RATIO_value<<0)), ((0x0FC + (0x44E12000)) + offset), "Memory");
+	__writeMemory32(REG_PHY_GATELVL_INIT_RATIO_value>>2, ((0x100 + (0x44E12000)) + offset), "Memory");
+
+	__writeMemory32(((REG_PHY_FIFO_WE_SLAVE_RATIO_value<<30)|(REG_PHY_FIFO_WE_SLAVE_RATIO_value<<20)|(REG_PHY_FIFO_WE_SLAVE_RATIO_value<<10)|(REG_PHY_FIFO_WE_SLAVE_RATIO_value<<0)), ((0x108 + (0x44E12000)) + offset), "Memory");
+	__writeMemory32(REG_PHY_FIFO_WE_SLAVE_RATIO_value>>2,((0x10C + (0x44E12000)) + offset), "Memory");
+
+	__writeMemory32(((REG_PHY_WR_DATA_SLAVE_RATIO_value<<30)|(REG_PHY_WR_DATA_SLAVE_RATIO_value<<20)|(REG_PHY_WR_DATA_SLAVE_RATIO_value<<10)|(REG_PHY_WR_DATA_SLAVE_RATIO_value<<0)),((0x120 + (0x44E12000)) + offset), "Memory");
+	__writeMemory32(REG_PHY_WR_DATA_SLAVE_RATIO_value>>2, ((0x124 + (0x44E12000)) + offset), "Memory");	  
+	__writeMemory32(0x0,((0x138 + (0x44E12000)) + offset), "Memory");	  
+}
+
+
+emif_mmr_config( Read_Latency, Timing1, Timing2, Timing3, Sdram_Config, Ref_Ctrl)
+{
+	__var i;
+
+	__message "emif Timing register configuration is in progress ....... \n";
+	 
+	__writeMemory32(Read_Latency, (0x4C000000 + 0x0E4), "Memory");
+	__writeMemory32(Read_Latency, (0x4C000000 + 0x0E8), "Memory");
+	__writeMemory32(Read_Latency, (0x4C000000 + 0x0EC), "Memory");
+
+	__writeMemory32(Timing1, (0x4C000000 + 0x018), "Memory");
+	__writeMemory32(Timing1, (0x4C000000 + 0x01C), "Memory");
+
+	__writeMemory32(Timing2, (0x4C000000 + 0x020), "Memory");
+	__writeMemory32(Timing2, (0x4C000000 + 0x024), "Memory");
+
+	__writeMemory32(Timing3, (0x4C000000 + 0x028), "Memory");
+	__writeMemory32(Timing3, (0x4C000000 + 0x02C), "Memory");
+
+	__writeMemory32(Sdram_Config, (0x4C000000 + 0x008), "Memory");
+	__writeMemory32(Sdram_Config, (0x4C000000 + 0x00C), "Memory");
+	__writeMemory32(0x00004650, (0x4C000000 + 0x010), "Memory");
+	__writeMemory32(0x00004650, (0x4C000000 + 0x014), "Memory"); 
+
+	for(i=0;i<5000;i++)
+    {
+    }
+
+	__writeMemory32(Ref_Ctrl, (0x4C000000 + 0x010), "Memory");
+	__writeMemory32(Ref_Ctrl, (0x4C000000 + 0x014), "Memory"); 
+
+	__writeMemory32(Sdram_Config, (0x4C000000 + 0x008), "Memory");
+	__writeMemory32(Sdram_Config, (0x4C000000 + 0x00C), "Memory");
+
+	__message "emif Timing register configuration is done ....... \n";
+}
+
+gpio_module_clk_config()
+{
+   __var buff;
+
+   buff = __readMemory32((0x400 + 0x44E00000 + 0x8), "Memory");
+
+   buff |= 0x2;
+
+   __writeMemory32(buff, (0x400 + 0x44E00000 + 0x8), "Memory");
+
+   while((__readMemory32((0x400 + 0x44E00000 + 0x8), "Memory") & 0x3) != 0x2); 
+
+   buff = __readMemory32((0x400 + 0x44E00000 + 0x8), "Memory");
+
+   buff |= 0x00040000;
+
+   __writeMemory32(buff, (0x400 + 0x44E00000 + 0x8), "Memory");
+
+   while((__readMemory32((0x400 + 0x44E00000 + 0x8), "Memory") & 0x00040000) != 0x00040000);
+
+   while((__readMemory32((0x400 + 0x44E00000 + 0x8), "Memory") & 0x00030000) != 0x0);
+
+   while((__readMemory32((0x400 + 0x44E00000), "Memory") & 0x00000100) != 0x00000100);
+
+   __message "GPIO module clock configuration is done ....... \n";
+
+}
+
+phy_config_cmd()
+{
+    __var i;
+
+    for(i = 0; i < 3; i++)
+    {
+        __message "DDR PHY CMD Register configuration is in progress ....... \n";
+ 
+        __writeMemory32(0x40, ((0x44E12000 + 0x01c) + (i * 0x34)), "Memory");
+
+        __writeMemory32(0x1, ((0x44E12000 + 0x02c) + (i * 0x34)), "Memory");
+
+    }
+
+}
+
+phy_config_data()
+{
+    __var i;
+
+    for(i = 0; i < 2; i++)
+    {
+        __message "DDR PHY Data Register configuration is in progress ....... \n";
+
+        __writeMemory32(0x3B, ((0x44E12000 + 0x0c8) + (i * 0xA4)), "Memory");
+
+        __writeMemory32(0x85, ((0x44E12000 + 0x0DC) + (i * 0xA4)), "Memory");
+
+        __writeMemory32(0x100, ((0x44E12000 + 0x108) + (i * 0xA4)), "Memory");
+
+        __writeMemory32(0xC1, ((0x44E12000 + 0x120) + (i * 0xA4)), "Memory");
+
+    }
+
+}
+
+ddr3_emif_config()
+{
+        __message "****  AM335x OPP120 DDR3 EMIF and PHY configuration is in progress......... \n";
+
+	emif_prcm_clk_enable();
+
+	__message "DDR PHY Configuration In progress \n";
+
+        /* Perform GPIO module clock configuration. */
+        gpio_module_clk_config();
+
+        __writeMemory32(0x00000067, (0x44E10000 + 0x964), "Memory");
+
+        __writeMemory32((__readMemory32((0x44E07000 + 0x130), "Memory") & 0xFFFFFFFE), (0x44E07000 + 0x130), "Memory");
+
+        __writeMemory32((__readMemory32((0x44E07000 + 0x10), "Memory") | 0x02), (0x44E07000 + 0x10), "Memory");
+
+        /* Wait until GPIO module is reset. */
+
+        while(!(__readMemory32((0x44E07000 + 0x114), "Memory") & 0x01));
+
+        __writeMemory32((__readMemory32((0x44E07000 + 0x134), "Memory") & ~(1 << 7)), (0x44E07000 + 0x134), "Memory");
+
+        __writeMemory32((1 << 7), (0x44E07000 + 0x194), "Memory");
+
+        __writeMemory32((__readMemory32((0x44E10000 + 0x0E0C), "Memory") & 0xFFFFFFFE), (0x44E10000 + 0x0E0C), "Memory");
+
+        __writeMemory32((__readMemory32((0x44E10000 + 0x0E0C), "Memory") | 0x00000001), (0x44E10000 + 0x0E0C), "Memory");
+
+	vtp_enable(); 
+
+        phy_config_cmd();
+
+        phy_config_data();	
+
+        __writeMemory32(0x18B, (0x1404 + 0x44E10000), "Memory");
+        __writeMemory32(0x18B, (0x1408 + 0x44E10000), "Memory");
+        __writeMemory32(0x18B, (0x140C + 0x44E10000), "Memory");
+        __writeMemory32(0x18B, (0x1440 + 0x44E10000), "Memory");
+        __writeMemory32(0x18B, (0x1444 + 0x44E10000), "Memory");
+
+        __writeMemory32((__readMemory32((0x0E04 + 0x44E10000), "Memory") & ~0x10000000), (0x0E04 + 0x44E10000), "Memory");
+
+        __writeMemory32((__readMemory32((0x131C + 0x44E10000), "Memory") | 0x00000001), (0x131C + 0x44E10000), "Memory");
+
+        __message "EMIF Timing register configuration is in progress ....... \n";
+
+        __writeMemory32(0x06, (0x0E4 + 0x4C000000), "Memory");
+        __writeMemory32(0x06, (0x0E8 + 0x4C000000), "Memory");
+        __writeMemory32(0x06, (0x0EC + 0x4C000000), "Memory");
+
+        __writeMemory32(0x0888A39B, (0x018 + 0x4C000000), "Memory");
+        __writeMemory32(0x0888A39B, (0x01C + 0x4C000000), "Memory");
+
+        __writeMemory32(0x26337FDA, (0x020 + 0x4C000000), "Memory");
+        __writeMemory32(0x26337FDA, (0x024 + 0x4C000000), "Memory");
+
+        __writeMemory32(0x501F830F, (0x028 + 0x4C000000), "Memory");
+        __writeMemory32(0x501F830F, (0x02C + 0x4C000000), "Memory");
+
+        __writeMemory32(0x0000093B, (0x010 + 0x4C000000), "Memory");
+        __writeMemory32(0x0000093B, (0x014 + 0x4C000000), "Memory");
+
+        __writeMemory32(0x50074BE4, (0x0C8 + 0x4C000000), "Memory");
+
+        __writeMemory32(0x61C04AB2, (0x008 + 0x4C000000), "Memory");
+
+        __message "EMIF Timing register configuration is done ....... \n";
+
+        if((__readMemory32((0x4C000000 + 0x004), "Memory") & 0x4) == 0x4)
+        {
+            __message "PHY is READY!!\n";
+        }
+
+        __message "DDR PHY Configuration done \n";
+
+        __message "****  AM335x OPP120 DDR3 EMIF and PHY configuration is done......... \n";
+}
+
+am335x_evm_initialization()
+{
+__var psc_base;
+__var reg;
+__var module_offest;
+
+  __message " AM335x EVM-SK Initialization is in progress .......... \n";
+  arm_opp120_config();
+  ddr3_emif_config();
+  __message " AM335x EVM-SK Initialization is done .......... \n";
+}
+
+execUserPreload()
+{
+	am335x_evm_initialization();
+}
+

bsp/beaglebone/am335x_DDR.icf

@@ -0,0 +1,44 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\a_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x82000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__   = 0x82000000;
+define symbol __ICFEDIT_region_ROM_end__     = 0x87FFFFFF;
+define symbol __ICFEDIT_region_RAM_start__   = 0x88000000;
+define symbol __ICFEDIT_region_RAM_end__     = 0x8FFFFFFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__   = 0x100;
+define symbol __ICFEDIT_size_svcstack__ = 0x1000;
+define symbol __ICFEDIT_size_irqstack__ = 0x100;
+define symbol __ICFEDIT_size_fiqstack__ = 0x100;
+define symbol __ICFEDIT_size_undstack__ = 0x100;
+define symbol __ICFEDIT_size_abtstack__ = 0x100;
+define symbol __ICFEDIT_size_heap__     = 0x400;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block SVC_STACK with alignment = 8, size = __ICFEDIT_size_svcstack__ { };
+define block IRQ_STACK with alignment = 8, size = __ICFEDIT_size_irqstack__ { };
+define block FIQ_STACK with alignment = 8, size = __ICFEDIT_size_fiqstack__ { };
+define block UND_STACK with alignment = 8, size = __ICFEDIT_size_undstack__ { };
+define block ABT_STACK with alignment = 8, size = __ICFEDIT_size_abtstack__ { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+keep { section FSymTab };
+keep { section VSymTab };
+keep { section .rti_fn* };
+
+place at address mem :__ICFEDIT_intvec_start__ {readonly section .intvec};
+
+place in ROM_region  { readonly };
+place in RAM_region  { readwrite,
+                        block CSTACK, block SVC_STACK, block IRQ_STACK, block FIQ_STACK,
+                        block UND_STACK, block ABT_STACK, block HEAP };

bsp/beaglebone/am335x_sk.ewp

@@ -0,0 +1,1123 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>
+  <configuration>
+    <name>DDR Debug</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>1</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>24</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>ExePath</name>
+          <state>DDR Debug\Exe</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>DDR Debug\Obj</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>DDR Debug\List</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>5.10.0.159</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.40.7.9864</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>am3359	TexasInstruments am3359</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>22</version>
+          <state>51</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CoreVariant</name>
+          <version>22</version>
+          <state>51</state>
+        </option>
+        <option>
+          <name>GFPUDeviceSlave</name>
+          <state>am3359	TexasInstruments am3359</state>
+        </option>
+        <option>
+          <name>FPU2</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>NrRegs</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>NEON</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave2</name>
+          <version>22</version>
+          <state>51</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>DDR_DEBUG</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>00000000</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\applications</state>
+          <state>$PROJ_DIR$\drivers</state>
+          <state>$PROJ_DIR$\</state>
+          <state>$PROJ_DIR$\..\..\src</state>
+          <state>$PROJ_DIR$\..\..\include</state>
+          <state>$PROJ_DIR$\..\..\components\init</state>
+          <state>$PROJ_DIR$\..\..\libcpu\arm\am335x</state>
+          <state>$PROJ_DIR$\..\..\components\finsh</state>
+          <state>$PROJ_DIR$\..\..\components\drivers\include</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ADefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>3</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>am335x_sk.bin</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+        <hasPrio>0</hasPrio>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>$PROJ_FNAME$.out</state>
+        </option>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+          <state>$PROJ_DIR$\am335x_DDR.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>
+  <group>
+    <name>app</name>
+    <file>
+      <name>$PROJ_DIR$\applications\application.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\applications\board.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\applications\startup.c</name>
+    </file>
+  </group>
+  <group>
+    <name>bsp</name>
+    <file>
+      <name>$PROJ_DIR$\..\..\libcpu\arm\am335x\context_iar.S</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\libcpu\arm\am335x\cp15_iar.s</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\libcpu\arm\am335x\cpu.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\libcpu\arm\am335x\interrupt.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\libcpu\arm\am335x\stack.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\libcpu\arm\am335x\start_iar.s</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\libcpu\arm\am335x\trap.c</name>
+    </file>
+  </group>
+  <group>
+    <name>components</name>
+    <group>
+      <name>finsh</name>
+      <file>
+        <name>$PROJ_DIR$\..\..\components\finsh\cmd.c</name>
+      </file>
+      <file>
+        <name>$PROJ_DIR$\..\..\components\finsh\finsh_compiler.c</name>
+      </file>
+      <file>
+        <name>$PROJ_DIR$\..\..\components\finsh\finsh_error.c</name>
+      </file>
+      <file>
+        <name>$PROJ_DIR$\..\..\components\finsh\finsh_heap.c</name>
+      </file>
+      <file>
+        <name>$PROJ_DIR$\..\..\components\finsh\finsh_init.c</name>
+      </file>
+      <file>
+        <name>$PROJ_DIR$\..\..\components\finsh\finsh_node.c</name>
+      </file>
+      <file>
+        <name>$PROJ_DIR$\..\..\components\finsh\finsh_ops.c</name>
+      </file>
+      <file>
+        <name>$PROJ_DIR$\..\..\components\finsh\finsh_parser.c</name>
+      </file>
+      <file>
+        <name>$PROJ_DIR$\..\..\components\finsh\finsh_token.c</name>
+      </file>
+      <file>
+        <name>$PROJ_DIR$\..\..\components\finsh\finsh_var.c</name>
+      </file>
+      <file>
+        <name>$PROJ_DIR$\..\..\components\finsh\finsh_vm.c</name>
+      </file>
+      <file>
+        <name>$PROJ_DIR$\..\..\components\finsh\msh.c</name>
+      </file>
+      <file>
+        <name>$PROJ_DIR$\..\..\components\finsh\msh_cmd.c</name>
+      </file>
+      <file>
+        <name>$PROJ_DIR$\..\..\components\finsh\shell.c</name>
+      </file>
+      <file>
+        <name>$PROJ_DIR$\..\..\components\finsh\symbol.c</name>
+      </file>
+    </group>
+    <file>
+      <name>$PROJ_DIR$\..\..\components\drivers\src\completion.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\components\drivers\src\dataqueue.c</name>
+    </file>
+  </group>
+  <group>
+    <name>drivers</name>
+    <file>
+      <name>$PROJ_DIR$\..\..\components\drivers\serial\serial.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\drivers\uart.c</name>
+    </file>
+  </group>
+  <group>
+    <name>kernel</name>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\clock.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\components.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\device.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\idle.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\ipc.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\irq.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\kservice.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\mem.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\memheap.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\mempool.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\module.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\object.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\scheduler.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\slab.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\thread.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\timer.c</name>
+    </file>
+  </group>
+</project>
+
+

bsp/beaglebone/am335x_sk.eww

@@ -0,0 +1,9 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>
+  <project>
+    <path>$WS_DIR$\am335x_sk.ewp</path>
+  </project>
+</workspace>
+
+

bsp/beaglebone/applications/startup.c

@@ -10,6 +10,7 @@
  * Change Logs:
  * Date           Author       Notes
  * 2012-12-05     Bernard      the first version
+ * 2015-11-11     zchong     support iar compiler
  */
 
 #include <rthw.h>
@@ -18,7 +19,9 @@
 #include <board.h>
 
 extern int  rt_application_init(void);
-
+#ifdef __ICCARM__
+#pragma section="HEAP"
+#endif
 /**
  * This function will startup RT-Thread RTOS.
  */
@@ -34,7 +37,11 @@ void rtthread_startup(void)
 
 	/* initialize memory system */
 #ifdef RT_USING_HEAP
+#ifdef __ICCARM__
+rt_system_heap_init(__segment_end("HEAP"), (void*)0x8FFFFFFF);
+#else
     rt_system_heap_init(HEAP_BEGIN, HEAP_END);
+#endif
 #endif
 
 	/* initialize scheduler system */

bsp/beaglebone/rtconfig.h

@@ -127,7 +127,7 @@
 // <bool name="RT_USING_LIBC" description="Using C library" default="true" />
 #define RT_USING_LIBC
 // <bool name="RT_USING_PTHREADS" description="Using POSIX threads library" default="true" />
-#define RT_USING_PTHREADS
+//#define RT_USING_PTHREADS
 // </section>
 
 // <section name="RT_USING_DFS" description="Device file system" default="true" >

libcpu/arm/am335x/cp15_iar.s

@@ -0,0 +1,154 @@
+/*
+ * File      : cp15_iar.s
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2015, RT-Thread Development Team
+ * http://www.rt-thread.org
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2015-04-06     zchong      change to iar compiler from convert from cp15_gcc.S
+ */
+ 
+    SECTION .text:CODE:NOROOT(2)
+         
+    ARM
+
+    EXPORT  rt_cpu_vector_set_base
+rt_cpu_vector_set_base:
+        MCR     p15, #0, r0, c12, c0, #0
+        DSB
+        BX      lr
+        
+    EXPORT  rt_cpu_vector_get_base
+rt_cpu_vector_get_base:
+        MRC     p15, #0, r0, c12, c0, #0
+        BX      lr
+
+    EXPORT  rt_cpu_get_sctlr
+rt_cpu_get_sctlr:
+        MRC     p15, #0, r0, c1, c0, #0
+        BX      lr
+
+    EXPORT  rt_cpu_dcache_enable
+rt_cpu_dcache_enable:
+        MRC     p15, #0, r0, c1, c0, #0 
+        ORR     r0,  r0, #0x00000004
+        MCR     p15, #0, r0, c1, c0, #0
+        BX      lr
+
+    EXPORT  rt_cpu_icache_enable
+rt_cpu_icache_enable:
+        MRC     p15, #0, r0, c1, c0, #0
+        ORR     r0,  r0, #0x00001000
+        MCR     p15, #0, r0, c1, c0, #0 
+        BX      lr
+
+;_FLD_MAX_WAY DEFINE 0x3ff
+;_FLD_MAX_IDX DEFINE 0x7ff
+
+
+    EXPORT  rt_cpu_dcache_clean_flush
+rt_cpu_dcache_clean_flush:
+        PUSH    {r4-r11} 
+        DMB                   
+        MRC     p15, #1, r0, c0, c0, #1  ; read clid register
+        ANDS    r3, r0, #0x7000000       ; get level of coherency
+        MOV     r3, r3, lsr #23  
+        BEQ     finished  
+        MOV     r10, #0 
+loop1:
+        ADD     r2, r10, r10, lsr #1 
+        MOV     r1, r0, lsr r2
+        AND     r1, r1, #7 
+        CMP     r1, #2  
+        BLT     skip 
+        MCR     p15, #2, r10, c0, c0, #0 
+        ISB 
+        MRC     p15, #1, r1, c0, c0, #0 
+        AND     r2, r1, #7 
+        ADD     r2, r2, #4   
+        ;LDR     r4, _FLD_MAX_WAY 
+        LDR     r4, =0x3FF
+        ANDS    r4, r4, r1, lsr #3
+        CLZ     r5, r4
+        ;LDR     r7, _FLD_MAX_IDX
+        LDR     r7, =0x7FF
+        ANDS    r7, r7, r1, lsr #13 
+loop2:
+        MOV     r9, r4   
+loop3:
+        ORR     r11, r10, r9, lsl r5  
+        ORR     r11, r11, r7, lsl r2 
+        MCR     p15, #0, r11, c7, c14, #2 
+        SUBS    r9, r9, #1 
+        BGE     loop3 
+        SUBS    r7, r7, #1 
+        BGE     loop2 
+skip: 
+        ADD     r10, r10, #2 
+        CMP     r3, r10 
+        BGT     loop1 
+
+finished:
+        DSB
+        ISB                         
+        POP     {r4-r11} 
+        BX      lr
+
+
+    EXPORT  rt_cpu_dcache_disable
+rt_cpu_dcache_disable:
+        PUSH    {r4-r11, lr}
+        MRC     p15, #0, r0, c1, c0, #0
+        BIC     r0,  r0, #0x00000004
+        MCR     p15, #0, r0, c1, c0, #0
+        BL      rt_cpu_dcache_clean_flush
+        POP     {r4-r11, lr}
+        BX      lr
+
+
+    EXPORT  rt_cpu_icache_disable
+rt_cpu_icache_disable:
+        MRC     p15, #0, r0, c1, c0, #0
+        BIC     r0,  r0, #0x00001000
+        MCR     p15, #0, r0, c1, c0, #0
+        BX      lr
+
+    EXPORT  rt_cpu_mmu_disable
+rt_cpu_mmu_disable:
+        MCR     p15, #0, r0, c8, c7, #0    ; invalidate tlb  
+        MRC     p15, #0, r0, c1, c0, #0    
+        BIC     r0, r0, #1      
+        MCR     p15, #0, r0, c1, c0, #0    ; clear mmu bit
+        DSB  
+        BX      lr
+
+    EXPORT  rt_cpu_mmu_enable
+rt_cpu_mmu_enable:
+        MRC     p15, #0, r0, c1, c0, #0
+        ORR     r0, r0, #0x001
+        MCR     p15, #0, r0, c1, c0, #0    ; set mmu enable bit
+        DSB
+        BX      lr
+
+    EXPORT  rt_cpu_tlb_set
+rt_cpu_tlb_set:
+        MCR     p15, #0, r0, c2, c0, #0
+        DMB
+        BX      lr
+        
+    END

libcpu/arm/am335x/cpu.c

@@ -92,6 +92,8 @@ rt_inline void cache_disable(rt_uint32_t bit)
 }
 #endif
 
+
+#if defined(__CC_ARM)|(__GNUC__)
 /**
  * enable I-Cache
  *
@@ -145,6 +147,7 @@ rt_base_t rt_hw_cpu_dcache_status()
 {
 	return (cp15_rd() & DCACHE_MASK);
 }
+#endif
 
 /**
  *  shutdown CPU

libcpu/arm/am335x/interrupt.c

@@ -10,6 +10,7 @@
  * Change Logs:
  * Date           Author       Notes
  * 2013-07-06     Bernard      first version
+ * 2015-11-06     zchong       support iar compiler
  */
 
 #include <rthw.h>
@@ -53,13 +54,22 @@ void rt_dump_aintc(void)
 
 const unsigned int AM335X_VECTOR_BASE = 0x4030FC00;
 extern void rt_cpu_vector_set_base(unsigned int addr);
+#ifdef __ICCARM__
+extern int __vector;
+#else
 extern int system_vectors;
+#endif
 
 static void rt_hw_vector_init(void)
 {
     unsigned int *dest = (unsigned int *)AM335X_VECTOR_BASE;
+    
+#ifdef __ICCARM__
+    unsigned int *src =  (unsigned int *)&__vector;
+#else
     unsigned int *src =  (unsigned int *)&system_vectors;
-
+#endif
+    
     rt_memcpy(dest, src, 16 * 4);
     rt_cpu_vector_set_base(AM335X_VECTOR_BASE);
 }
@@ -203,3 +213,5 @@ void rt_dump_isr_table(void)
     }
 }
 /*@}*/
+
+

libcpu/arm/am335x/start_iar.s

@@ -0,0 +1,292 @@
+/*
+ * File      : start_iar.s
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2015, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2015-04-06     zchong      the first version 
+ */
+
+        MODULE  ?cstartup
+        
+        ; --------------------
+; Mode, correspords to bits 0-5 in CPSR
+
+MODE_MSK DEFINE 0x1F            ; Bit mask for mode bits in CPSR
+I_Bit    DEFINE 0x80            ; when I bit is set, IRQ is disabled
+F_Bit    DEFINE 0x40            ; when F bit is set, FIQ is disabled
+
+USR_MODE DEFINE 0x10            ; User mode
+FIQ_MODE DEFINE 0x11            ; Fast Interrupt Request mode
+IRQ_MODE DEFINE 0x12            ; Interrupt Request mode
+SVC_MODE DEFINE 0x13            ; Supervisor mode
+ABT_MODE DEFINE 0x17            ; Abort mode
+UND_MODE DEFINE 0x1B            ; Undefined Instruction mode
+SYS_MODE DEFINE 0x1F            ; System mode
+
+        
+        ;; Forward declaration of sections.
+        SECTION IRQ_STACK:DATA:NOROOT(3)
+        SECTION FIQ_STACK:DATA:NOROOT(3)
+        SECTION SVC_STACK:DATA:NOROOT(3)
+        SECTION ABT_STACK:DATA:NOROOT(3)
+        SECTION UND_STACK:DATA:NOROOT(3)
+        SECTION CSTACK:DATA:NOROOT(3)
+        SECTION .text:CODE
+        
+        
+        SECTION .intvec:CODE:NOROOT(5)
+
+        PUBLIC  __vector
+        PUBLIC  __iar_program_start
+
+
+__iar_init$$done:               ; The vector table is not needed
+                                ; until after copy initialization is done
+
+__vector:                       ; Make this a DATA label, so that stack usage
+                                ; analysis doesn't consider it an uncalled fun
+        ARM
+
+        ; All default exception handlers (except reset) are
+        ; defined as weak symbol definitions.
+        ; If a handler is defined by the application it will take precedence.
+        LDR     PC,Reset_Addr           ; Reset
+        LDR     PC,Undefined_Addr       ; Undefined instructions
+        LDR     PC,SWI_Addr             ; Software interrupt (SWI/SVC)
+        LDR     PC,Prefetch_Addr        ; Prefetch abort
+        LDR     PC,Abort_Addr           ; Data abort
+        DCD     0                       ; RESERVED
+        LDR     PC,IRQ_Addr             ; IRQ
+        LDR     PC,FIQ_Addr             ; FIQ
+
+        DATA
+
+Reset_Addr:     DCD   __iar_program_start
+Undefined_Addr: DCD   Undefined_Handler
+SWI_Addr:       DCD   SWI_Handler
+Prefetch_Addr:  DCD   Prefetch_Handler
+Abort_Addr:     DCD   Abort_Handler
+IRQ_Addr:       DCD   IRQ_Handler
+FIQ_Addr:       DCD   FIQ_Handler
+
+
+; --------------------------------------------------
+; ?cstartup -- low-level system initialization code.
+;
+; After a reset execution starts here, the mode is ARM, supervisor
+; with interrupts disabled.
+;
+
+        SECTION .text:CODE:NOROOT(2)
+
+        EXTERN  rt_hw_trap_udef
+        EXTERN  rt_hw_trap_swi
+        EXTERN  rt_hw_trap_pabt
+        EXTERN  rt_hw_trap_dabt
+        EXTERN  rt_hw_trap_fiq
+        EXTERN  rt_hw_trap_irq
+        EXTERN  rt_interrupt_enter
+        EXTERN  rt_interrupt_leave
+        EXTERN  rt_thread_switch_interrupt_flag
+        EXTERN  rt_interrupt_from_thread
+        EXTERN  rt_interrupt_to_thread
+        EXTERN  rt_current_thread
+        EXTERN  vmm_thread
+        EXTERN  vmm_virq_check
+        
+        EXTERN  __cmain
+        REQUIRE __vector
+        EXTWEAK __iar_init_core
+        EXTWEAK __iar_init_vfp
+
+
+        ARM
+
+__iar_program_start:
+?cstartup:
+
+;
+; Add initialization needed before setup of stackpointers here.
+;
+
+;
+; Initialize the stack pointers.
+; The pattern below can be used for any of the exception stacks:
+; FIQ, IRQ, SVC, ABT, UND, SYS.
+; The USR mode uses the same stack as SYS.
+; The stack segments must be defined in the linker command file,
+; and be declared above.
+;
+
+        MRS     r0, cpsr                ; Original PSR value
+
+        ;; Set up the interrupt stack pointer.
+        BIC     r0, r0, #MODE_MSK       ; Clear the mode bits
+        ORR     r0, r0, #IRQ_MODE       ; Set IRQ mode bits
+        MSR     cpsr_c, r0              ; Change the mode
+        LDR     sp, =SFE(IRQ_STACK)     ; End of IRQ_STACK
+        BIC     sp,sp,#0x7              ; Make sure SP is 8 aligned
+
+        ;; Set up the fast interrupt stack pointer.
+        BIC     r0, r0, #MODE_MSK       ; Clear the mode bits
+        ORR     r0, r0, #FIQ_MODE       ; Set FIR mode bits
+        MSR     cpsr_c, r0              ; Change the mode
+        LDR     sp, =SFE(FIQ_STACK)     ; End of FIQ_STACK
+        BIC     sp,sp,#0x7              ; Make sure SP is 8 aligned
+        
+        BIC     r0,r0,#MODE_MSK         ; Clear the mode bits
+        ORR     r0,r0,#ABT_MODE         ; Set Abort mode bits
+        MSR     cpsr_c,r0               ; Change the mode
+        LDR     sp,=SFE(ABT_STACK)      ; End of ABT_STACK
+        BIC     sp,sp,#0x7              ; Make sure SP is 8 aligned
+
+        BIC     r0,r0,#MODE_MSK         ; Clear the mode bits
+        ORR     r0,r0,#UND_MODE         ; Set Undefined mode bits
+        MSR     cpsr_c,r0               ; Change the mode
+        LDR     sp,=SFE(UND_STACK)      ; End of UND_STACK
+        BIC     sp,sp,#0x7              ; Make sure SP is 8 aligned
+
+        ;; Set up the normal stack pointer.
+        BIC     r0 ,r0, #MODE_MSK       ; Clear the mode bits
+        ORR     r0 ,r0, #SVC_MODE       ; Set System mode bits
+        MSR     cpsr_c, r0              ; Change the mode
+        LDR     sp, =SFE(SVC_STACK)     ; End of SVC_STACK
+        BIC     sp,sp,#0x7              ; Make sure SP is 8 aligned
+
+        ;; Turn on core features assumed to be enabled.
+        BL      __iar_init_core
+
+        ;; Initialize VFP (if needed).
+        BL      __iar_init_vfp
+
+
+        ;; Continue to __cmain for C-level initialization.
+        B       __cmain
+
+      
+Undefined_Handler:
+        SUB     sp, sp, #72
+        STMIA   sp, {r0 - r12}          ;/* Calling r0-r12                  */
+        ADD     r8, sp, #60
+
+        MRS     r1, cpsr
+        MRS     r2, spsr
+        ORR     r2,r2, #I_Bit | F_Bit
+        MSR     cpsr_c, r2
+        MOV     r0, r0
+        STMDB   r8, {sp, lr}            ;/* Calling SP, LR                  */
+        MSR     cpsr_c, r1              ;/* return to Undefined Instruction mode  */
+
+        STR     lr, [r8, #0]            ;/* Save calling PC                 */
+        MRS     r6, spsr
+        STR     r6, [r8, #4]            ;/* Save CPSR                       */
+        STR     r0, [r8, #8]            ;/* Save OLD_R0                     */
+        MOV     r0, sp
+
+        BL      rt_hw_trap_udef
+
+        LDMIA    sp, {r0 - r12}         ;/* Calling r0 - r2  */
+        MOV      r0, r0
+        LDR      lr, [sp, #60]          ;/* Get PC   */
+        ADD      sp, sp, #72
+        MOVS     pc, lr                 ;/* return & move spsr_svc into cpsr */
+
+SWI_Handler:
+        BL      rt_hw_trap_swi
+
+Prefetch_Handler:
+        BL      rt_hw_trap_pabt
+
+Abort_Handler:
+        SUB     sp, sp, #72
+        STMIA   sp, {r0 - r12}          ;/* Calling r0-r12                  */
+        ADD     r8, sp, #60
+        STMDB   r8, {sp, lr}            ;/* Calling SP, LR                  */
+        STR     lr, [r8, #0]            ;/* Save calling PC                 */
+        MRS     r6, spsr
+        STR     r6, [r8, #4]            ;/* Save CPSR                       */
+        STR     r0, [r8, #8]            ;/* Save OLD_R0                     */
+        MOV     r0, sp
+
+        BL      rt_hw_trap_dabt
+
+        LDMIA    sp, {r0 - r12}         ;/* Calling r0 - r2  */
+        MOV      r0, r0
+        LDR      lr, [sp, #60]          ;/* Get PC   */
+        ADD      sp, sp, #72
+        MOVS     pc, lr                 ;/* return & move spsr_svc into cpsr */
+         
+FIQ_Handler:
+        STMFD   sp!,{r0-r7,lr}
+        BL      rt_hw_trap_fiq
+        LDMFD   sp!,{r0-r7,lr}
+        SUBS    pc,lr,#4
+
+IRQ_Handler:
+        STMFD   sp!, {r0-r12,lr}
+
+        BL      rt_interrupt_enter
+        BL      rt_hw_trap_irq
+        BL      rt_interrupt_leave
+
+        ; if rt_thread_switch_interrupt_flag set, jump to
+        ; rt_hw_context_switch_interrupt_do and don't return
+        LDR     r0, =rt_thread_switch_interrupt_flag
+        LDR     r1, [r0]
+        CMP     r1, #1
+        BEQ     rt_hw_context_switch_interrupt_do
+
+        LDMFD   sp!, {r0-r12,lr}
+        SUBS    pc, lr, #4
+
+rt_hw_context_switch_interrupt_do:
+        MOV     r1,  #0         ; clear flag
+        STR     r1,  [r0]
+
+        LDMFD   sp!, {r0-r12,lr}; reload saved registers
+        STMFD   sp,  {r0-r2}    ; save r0-r2
+
+        MRS     r0,  spsr       ; get cpsr of interrupt thread
+
+        SUB     r1,  sp, #4*3
+        SUB     r2,  lr, #4     ; save old task's pc to r2
+
+        ; switch to SVC mode with no interrupt
+        MSR     cpsr_c, #I_Bit | F_Bit | SVC_MODE
+
+        STMFD   sp!, {r2}       ; push old task's pc
+        STMFD   sp!, {r3-r12,lr}; push old task's lr,r12-r4
+        LDMFD   r1,  {r1-r3}    ; restore r0-r2 of the interrupt thread
+        STMFD   sp!, {r1-r3}    ; push old task's r0-r2
+        STMFD   sp!, {r0}       ; push old task's cpsr
+
+        LDR     r4,  =rt_interrupt_from_thread
+        LDR     r5,  [r4]
+        STR     sp,  [r5]       ; store sp in preempted tasks's TCB
+
+        LDR     r6,  =rt_interrupt_to_thread
+        LDR     r6,  [r6]
+        LDR     sp,  [r6]       ; get new task's stack pointer
+
+        LDMFD   sp!, {r4}       ; pop new task's cpsr to spsr
+        MSR     spsr_cxsf, r4
+
+        LDMFD   sp!, {r0-r12,lr,pc}^ ; pop new task's r0-r12,lr & pc, copy spsr to cpsr
+    
+     END