[BSP]NUC472

1.增加MDK4工程
2.修复GCC的链接文件 栈内存与动态内存地址重复
3.修复EMAC驱动宏错误

bsp/nuvoton_nuc472/Libraries/Device/Nuvoton/NUC472_442/Source/GCC/startup.c

@@ -150,9 +150,9 @@ extern unsigned char  _sdata;
 // End address for the .data section// defined in linker script
 extern unsigned char  _edata;
 // Begin address for the .bss section// defined in linker script
-extern unsigned char  __bss_start__;
+extern unsigned char  __bss_start;
 // End address for the .bss section// defined in linker script
-extern unsigned char  __bss_end__;
+extern unsigned char  __bss_end;
 
 extern int entry(void);
 
@@ -333,7 +333,7 @@ pHandler g_pfnVectors[] =
 void _start()
 {
     memcpy(&_sdata, &_sidata, &_edata - &_sdata);
-    memset(&__bss_start__, 0, &__bss_end__ - &__bss_start__);
+    memset(&__bss_start, 0, &__bss_end - &__bss_start);
 }
 
 static void Reset_Handler(void)

bsp/nuvoton_nuc472/README.md

@@ -3,7 +3,7 @@
     NuTiny-EVB-NUC472
 
 ## note:
-    support the GCC MDK5 IAR
+    support the GCC MDK4 MDK5 IAR
 
 **TODO**
 

bsp/nuvoton_nuc472/drivers/board.c

@@ -22,7 +22,7 @@ extern int Image$$RW_IRAM1$$ZI$$Limit;
 #elif __ICCARM__
 #pragma section="HEAP"
 #else
-extern int __bss_end__;
+extern int __bss_end;
 #endif
 
 /**
@@ -80,7 +80,7 @@ void rt_hw_board_init(void)
     rt_system_heap_init(__segment_end("HEAP"), (void*)SRAM_END);
 #else
     /* init memory system */
-    rt_system_heap_init((void*)&__bss_end__, (void*)SRAM_END);
+    rt_system_heap_init((void*)&__bss_end, (void*)SRAM_END);
 #endif
 #endif /* RT_USING_HEAP */
 

bsp/nuvoton_nuc472/drivers/nuc472_eth.c

@@ -181,7 +181,7 @@ static void init_rx_desc(rt_nuc472_emac_t emac)
         emac->rx_desc[i].status1 = OWNERSHIP_EMAC;
         emac->rx_desc[i].buf = &emac->rx_buf[i][0];
         emac->rx_desc[i].status2 = 0;
-        emac->rx_desc[i].next = &emac->rx_desc[(i + 1) % TX_DESCRIPTOR_NUM];
+        emac->rx_desc[i].next = &emac->rx_desc[(i + 1) % RX_DESCRIPTOR_NUM];
     }
     emac_base->RXDSA = (unsigned int)&emac->rx_desc[0];
     return;
@@ -205,8 +205,8 @@ static void set_mac_addr(rt_nuc472_emac_t emac, rt_uint8_t *addr)
 
 void EMAC_init(rt_nuc472_emac_t emac, rt_uint8_t *mac_addr)
 {
+    EMAC_T *emac_base = emac->emac_base;  
     RT_ASSERT(emac->dev_addr != RT_NULL);
-    EMAC_T *emac_base = emac->emac_base;
 
     CLK_EnableModuleClock(EMAC_MODULE);
 
@@ -445,12 +445,12 @@ rt_err_t rt_nuc472_emac_tx(rt_device_t dev, struct pbuf* p)
 struct pbuf *rt_nuc472_emac_rx(rt_device_t dev)
 {
     rt_nuc472_emac_t emac = (rt_nuc472_emac_t)dev;
+    unsigned int status;
     struct pbuf* p;
 
     /* init p pointer */
     p = RT_NULL;
 
-    unsigned int status;
     status = emac->cur_rx_desc_ptr->status1;
 
     if(status & OWNERSHIP_EMAC)

bsp/nuvoton_nuc472/ldscripts/libs.ld

@@ -1,8 +0,0 @@
-
-/*
- * Placeholder to list other libraries required by the application.
- 
-GROUP(
-)
-
- */

bsp/nuvoton_nuc472/ldscripts/mem.ld

@@ -1,25 +0,0 @@
-/*
- * Memory Spaces Definitions.
- *
- * Need modifying for a specific board. 
- *   FLASH.ORIGIN: starting address of flash
- *   FLASH.LENGTH: length of flash
- *   RAM.ORIGIN: starting address of RAM bank 0
- *   RAM.LENGTH: length of RAM bank 0
- *
- * The values below can be addressed in further linker scripts
- * using functions like 'ORIGIN(RAM)' or 'LENGTH(RAM)'.
- */
-
-MEMORY
-{
-  RAM (xrw)  : ORIGIN = 0x20000000, LENGTH =  64K
-  FLASH (rx) : ORIGIN = 0x00000000, LENGTH =  512K /*4K*/
-}
-
-/*
- * For external ram use something like:
-
-  RAM (xrw) : ORIGIN = 0x68000000, LENGTH = 8K
-
- */

bsp/nuvoton_nuc472/ldscripts/sections.ld

@@ -1,129 +1,32 @@
 /*
- * Default linker script for Cortex-M 
- * 
- * To make use of the multi-region initialisations, define
- * OS_INCLUDE_STARTUP_INIT_MULTIPLE_RAM_SECTIONS for the _startup.c file.
+ * linker script for STM32F10x with GNU ld
+ * bernard.xiong 2009-10-14
  */
 
-/*
- * The '__stack' definition is required by crt0, do not remove it.
- */
-__stack = ORIGIN(RAM) + LENGTH(RAM);
-
-_estack = __stack; 	/* STM specific definition */
-
-/*
- * Default stack sizes.
- * These are used by the startup in order to allocate stacks 
- * for the different modes.
- */
-
-__Main_Stack_Size = 1024 ;
-
-PROVIDE ( _Main_Stack_Size = __Main_Stack_Size ) ;
-
-__Main_Stack_Limit = __stack  - __Main_Stack_Size ;
-
-/* "PROVIDE" allows to easily override these values from an 
- * object file or the command line. */
-PROVIDE ( _Main_Stack_Limit = __Main_Stack_Limit ) ;
-
-/*
- * There will be a link error if there is not this amount of 
- * RAM free at the end. 
- */
-_Minimum_Stack_Size = 256 ;
-
-/*
- * Default heap definitions.
- * The heap start immediately after the last statically allocated 
- * .sbss/.noinit section, and extends up to the main stack limit.
- */
-PROVIDE ( _Heap_Begin = _end_noinit ) ;
-PROVIDE ( _Heap_Limit = __stack - __Main_Stack_Size ) ;
-
-/* 
- * The entry point is informative, for debuggers and simulators,
- * since the Cortex-M vector points to it anyway.
- */
+/* Program Entry, set to mark it as "used" and avoid gc */
+MEMORY
+{
+    CODE (rx) : ORIGIN = 0x00000000, LENGTH = 512k /* 128K sram */
+    DATA (rw) : ORIGIN = 0x20000000, LENGTH =  64k /* 512KB flash */
+}
 ENTRY(_start)
-
-
-/* Sections Definitions */
+_system_stack_size = 0x400;
 
 SECTIONS
 {
-    /*
-     * For Cortex-M devices, the beginning of the startup code is stored in
-     * the .isr_vector section, which goes to FLASH. 
-     */
-    .isr_vector : ALIGN(4)
-    {
-        FILL(0xFF)
-        
-        __vectors_start = ABSOLUTE(.) ;
-        __vectors_start__ = ABSOLUTE(.) ; /* STM specific definition */
-        KEEP(*(.isr_vector))     	/* Interrupt vectors */
-        
-		KEEP(*(.cfmconfig))			/* Freescale configuration words */   
-		     
-        /* 
-         * This section is here for convenience, to store the
-         * startup code at the beginning of the flash area, hoping that
-         * this will increase the readability of the listing.
-         */
-        *(.after_vectors .after_vectors.*)	/* Startup code and ISR */
-
-    } >FLASH
-
-    .inits : ALIGN(4)
+    .text :
     {
-        /* 
-         * Memory regions initialisation arrays.
-         *
-         * Thee are two kinds of arrays for each RAM region, one for 
-         * data and one for bss. Each is iterrated at startup and the   
-         * region initialisation is performed.
-         * 
-         * The data array includes:
-         * - from (LOADADDR())
-         * - region_begin (ADDR())
-         * - region_end (ADDR()+SIZEOF())
-         *
-         * The bss array includes:
-         * - region_begin (ADDR())
-         * - region_end (ADDR()+SIZEOF())
-         *
-         * WARNING: It is mandatory that the regions are word aligned, 
-         * since the initialisation code works only on words.
-         */
-         
-        __data_regions_array_start = .;
-        
-        LONG(LOADADDR(.data));
-        LONG(ADDR(.data));
-        LONG(ADDR(.data)+SIZEOF(.data));
-        
-        __data_regions_array_end = .;
-        
-        __bss_regions_array_start = .;
-        
-        LONG(ADDR(.bss));
-        LONG(ADDR(.bss)+SIZEOF(.bss));
-        
-        
-        __bss_regions_array_end = .;
-
-        /* End of memory regions initialisation arrays. */
-    
-        /*
-         * These are the old initialisation sections, intended to contain
-         * naked code, with the prologue/epilogue added by crti.o/crtn.o
-         * when linking with startup files. The standalone startup code
-         * currently does not run these, better use the init arrays below.
-         */
-		KEEP(*(.init))
-		KEEP(*(.fini))
+        . = ALIGN(4);
+        _stext = .;
+        KEEP(*(.isr_vector))            /* Startup code */
+        . = ALIGN(4);
+        *(.text)                        /* remaining code */
+        *(.text.*)                      /* remaining code */
+        *(.rodata)                      /* read-only data (constants) */
+        *(.rodata*)
+        *(.glue_7)
+        *(.glue_7t)
+        *(.gnu.linkonce.t*)
 
         /* section information for finsh shell */
         . = ALIGN(4);
@@ -135,7 +38,7 @@ SECTIONS
         KEEP(*(VSymTab))
         __vsymtab_end = .;
         . = ALIGN(4);
-    
+
         /* section information for initial. */
         . = ALIGN(4);
         __rt_init_start = .;
@@ -143,212 +46,67 @@ SECTIONS
         __rt_init_end = .;
         . = ALIGN(4);
 
+        . = ALIGN(4);
+        _etext = .;
+    } > CODE = 0
 
-		/*
-         * The preinit code, i.e. an array of pointers to initialisation 
-         * functions to be performed before constructors.
-         */
-		PROVIDE_HIDDEN (__preinit_array_start = .);
-        
-        /*
-         * Used to run the SystemInit() before anything else.
-         */
-		KEEP(*(.preinit_array_sysinit .preinit_array_sysinit.*))
-        
-        /* 
-         * Used for other platform inits.
-         */
-		KEEP(*(.preinit_array_platform .preinit_array_platform.*))
-        
-        /*
-         * The application inits. If you need to enforce some order in 
-         * execution, create new sections, as before.
-         */
-		KEEP(*(.preinit_array .preinit_array.*))
-
-		PROVIDE_HIDDEN (__preinit_array_end = .);
-
-		. = ALIGN(4);
-
-		/*
-         * The init code, i.e. an array of pointers to static constructors.
-         */
-		PROVIDE_HIDDEN (__init_array_start = .);
-		KEEP(*(SORT(.init_array.*)))
-		KEEP(*(.init_array))
-		PROVIDE_HIDDEN (__init_array_end = .);
-
-		. = ALIGN(4);
-
-		/*
-         * The fini code, i.e. an array of pointers to static destructors.
-         */
-		PROVIDE_HIDDEN (__fini_array_start = .);
-		KEEP(*(SORT(.fini_array.*)))
-		KEEP(*(.fini_array))
-		PROVIDE_HIDDEN (__fini_array_end = .);
-
-    } >FLASH
-
-    /*
-     * For some STRx devices, the beginning of the startup code
-     * is stored in the .flashtext section, which goes to FLASH.
-     */
-    .flashtext : ALIGN(4)
+    /* .ARM.exidx is sorted, so has to go in its own output section.  */
+    __exidx_start = .;
+    .ARM.exidx :
     {
-        *(.flashtext .flashtext.*)	/* Startup code */
-    } >FLASH
- 
-    
-    /*
-     * The program code is stored in the .text section, 
-     * which goes to FLASH.
-     */
-    .text : ALIGN(4)
-    {
-        *(.text .text.*)			/* all remaining code */
- 
- 		/* read-only data (constants) */
-        *(.rodata .rodata.* .constdata .constdata.*) 		
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
 
-        *(vtable)					/* C++ virtual tables */
+        /* This is used by the startup in order to initialize the .data secion */
+        _sidata = .;
+    } > CODE
+    __exidx_end = .;
 
-		KEEP(*(.eh_frame*))
+    /* .data section which is used for initialized data */
 
-		/*
-		 * Stub sections generated by the linker, to glue together 
-		 * ARM and Thumb code. .glue_7 is used for ARM code calling 
-		 * Thumb code, and .glue_7t is used for Thumb code calling 
-		 * ARM code. Apparently always generated by the linker, for some
-		 * architectures, so better leave them here.
-		 */
-        *(.glue_7)
-        *(.glue_7t)
-        
-    	KEEP (*(.init))
-    	KEEP (*(.fini))
-        
-    } >FLASH
-
-	/* ARM magic sections */
-	.ARM.extab : ALIGN(4)
-   	{
-       *(.ARM.extab* .gnu.linkonce.armextab.*)
-   	} > FLASH
-   	
-    . = ALIGN(4);
-   	__exidx_start = .;   	
-   	.ARM.exidx : ALIGN(4)
-   	{
-       *(.ARM.exidx* .gnu.linkonce.armexidx.*)
-   	} > FLASH
-   	__exidx_end = .;
-   	
-    . = ALIGN(4);
-    _etext = .;
-    __etext = .;
-    
-    /* MEMORY_ARRAY */
-    /*
-    .ROarraySection :
+    .data : AT (_sidata)
     {
-     	*(.ROarraySection .ROarraySection.*)                          
-    } >MEMORY_ARRAY
-    */
-    
-	/* 
-     * This address is used by the startup code to 
-     * initialise the .data section.
-     */
-    _sidata = LOADADDR(.data);
-
-    /*
-     * The initialised data section.
-     *
-     * The program executes knowing that the data is in the RAM
-     * but the loader puts the initial values in the FLASH (inidata).
-     * It is one task of the startup to copy the initial values from 
-     * FLASH to RAM.
-     */
-    .data : ALIGN(4)
-    {
-    	FILL(0xFF)
-        /* This is used by the startup code to initialise the .data section */
-        _sdata = . ;        	/* STM specific definition */
-        __data_start__ = . ;
-		*(.data_begin .data_begin.*)
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .data secion */
+        _sdata = . ;
 
-		*(.data .data.*)
-		
-		*(.data_end .data_end.*)
-	    . = ALIGN(4);
+        *(.data)
+        *(.data.*)
+        *(.gnu.linkonce.d*)
 
-	    /* This is used by the startup code to initialise the .data section */
-        _edata = . ;        	/* STM specific definition */
-        __data_end__ = . ;
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .data secion */
+        _edata = . ;
+    } >DATA
 
-    } >RAM AT>FLASH
-    
-    /*
-     * The uninitialised data sections. NOLOAD is used to avoid
-     * the "section `.bss' type changed to PROGBITS" warning
-     */
+    .stack : 
+    {
+	_sstack = .;
+        . = . + _system_stack_size;
+        . = ALIGN(4);
+        _estack = .;
+    } >DATA
 
-    /* The primary uninitialised data section. */
-    .bss (NOLOAD) : ALIGN(4)
+    __bss_start = .;
+    .bss :
     {
-        __bss_start__ = .;     	/* standard newlib definition */
-        _sbss = .;              /* STM specific definition */
-        *(.bss_begin .bss_begin.*)
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .bss secion */
+        _sbss = .;
 
-        *(.bss .bss.*)
+        *(.bss)
+        *(.bss.*)
         *(COMMON)
+
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .bss secion */
+        _ebss = . ;
         
-        *(.bss_end .bss_end.*)
-	    . = ALIGN(4);
-        __bss_end__ = .;        /* standard newlib definition */
-        _ebss = . ;             /* STM specific definition */
-    } >RAM
-    
-    .noinit (NOLOAD) : ALIGN(4)
-    {
-        _noinit = .;
-        
-        *(.noinit .noinit.*) 
-        
-         . = ALIGN(4) ;
-        _end_noinit = .;   
-    } > RAM
-    
-    /* Mandatory to be word aligned, _sbrk assumes this */
-    PROVIDE ( end = _end_noinit ); /* was _ebss */
-    PROVIDE ( _end = _end_noinit );
-    PROVIDE ( __end = _end_noinit );
-    PROVIDE ( __end__ = _end_noinit );
-    
-    /*
-     * Used for validation only, do not allocate anything here!
-     *
-     * This is just to check that there is enough RAM left for the Main
-     * stack. It should generate an error if it's full.
-     */
-    ._check_stack : ALIGN(4)
-    {
-        . = . + _Minimum_Stack_Size ;
-    } >RAM
+        *(.bss.init)
+    } > DATA
+    __bss_end = .;
+
+    _end = .;
 
-    /* After that there are only debugging sections. */
-    
-    /* This can remove the debugging information from the standard libraries */    
-    /* 
-    DISCARD :
-    {
-     libc.a ( * )
-     libm.a ( * )
-     libgcc.a ( * )
-     }
-     */
-  
     /* Stabs debugging sections.  */
     .stab          0 : { *(.stab) }
     .stabstr       0 : { *(.stabstr) }
@@ -357,11 +115,9 @@ SECTIONS
     .stab.index    0 : { *(.stab.index) }
     .stab.indexstr 0 : { *(.stab.indexstr) }
     .comment       0 : { *(.comment) }
-    /*
-     * DWARF debug sections.
+    /* DWARF debug sections.
      * Symbols in the DWARF debugging sections are relative to the beginning
-     * of the section so we begin them at 0.  
-     */
+     * of the section so we begin them at 0.  */
     /* DWARF 1 */
     .debug          0 : { *(.debug) }
     .line           0 : { *(.line) }
@@ -383,5 +139,5 @@ SECTIONS
     .debug_weaknames 0 : { *(.debug_weaknames) }
     .debug_funcnames 0 : { *(.debug_funcnames) }
     .debug_typenames 0 : { *(.debug_typenames) }
-    .debug_varnames  0 : { *(.debug_varnames) }    
+    .debug_varnames  0 : { *(.debug_varnames) }
 }

bsp/nuvoton_nuc472/project.uvproj

@@ -0,0 +1,1153 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+  <SchemaVersion>1.1</SchemaVersion>
+  <Header>### uVision Project, (C) Keil Software</Header>
+  <Targets>
+    <Target>
+      <TargetName>rtthread-nuc472</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>NUC472HI8AE</Device>
+          <Vendor>Nuvoton</Vendor>
+          <Cpu>IRAM(0x20000000-0x2000FFFF) IROM(0-0x7FFFF) CLOCK(84000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+          <FlashUtilSpec />
+          <StartupFile>undefined</StartupFile>
+          <FlashDriverDll />
+          <DeviceId>0</DeviceId>
+          <RegisterFile />
+          <MemoryEnv />
+          <Cmp />
+          <Asm />
+          <Linker />
+          <OHString />
+          <InfinionOptionDll />
+          <SLE66CMisc />
+          <SLE66AMisc />
+          <SLE66LinkerMisc />
+          <SFDFile>SFD\Nuvoton\NUC400_v1.SFR</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath />
+          <IncludePath />
+          <LibPath />
+          <RegisterFilePath />
+          <DBRegisterFilePath />
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\build\</OutputDirectory>
+          <OutputName>template</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name />
+            <UserProg2Name />
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name />
+            <UserProg2Name />
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name />
+            <UserProg2Name />
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString />
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument />
+          <IncludeLibraryModules />
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments />
+          <SimDlgDll>DARMCM1.DLL</SimDlgDll>
+          <SimDlgDllArguments />
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments />
+          <TargetDlgDll>TARMCM1.DLL</TargetDlgDll>
+          <TargetDlgDllArguments />
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>1</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>0</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>1</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>
+            <UsePdscDebugDescription>1</UsePdscDebugDescription>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll />
+            <CpuDllArguments />
+            <PeripheralDll />
+            <PeripheralDllArguments />
+            <InitializationFile />
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll />
+            <CpuDllArguments />
+            <PeripheralDll />
+            <PeripheralDllArguments />
+            <InitializationFile />
+            <Driver />
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>0</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
+            <Capability>0</Capability>
+            <DriverSelection>-1</DriverSelection>
+          </Flash1>
+          <bUseTDR>0</bUseTDR>
+          <Flash2 />
+          <Flash3 />
+          <Flash4 />
+          <pFcarmOut />
+          <pFcarmGrp />
+          <pFcArmRoot />
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName />
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>0</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector />
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>1</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>0</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>0</uC99>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls />
+              <Define />
+              <Undefine />
+              <IncludePath>applications;.;drivers;Libraries\CMSIS\Include;Libraries\Device\Nuvoton\NUC472_442\Include;Libraries\StdDriver\inc;..\..\include;..\..\libcpu\arm\cortex-m4;..\..\libcpu\arm\common;..\..\components\drivers\include;..\..\components\drivers\include;..\..\components\finsh;..\..\components\net\lwip-2.0.2\src;..\..\components\net\lwip-2.0.2\src\include;..\..\components\net\lwip-2.0.2\src\include\ipv4;..\..\components\net\lwip-2.0.2\src\arch\include;..\..\components\net\lwip-2.0.2\src\include\netif;..\..\components\net\lwip-2.0.2\src\include\posix</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls />
+              <Define />
+              <Undefine />
+              <IncludePath />
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase />
+            <ScatterFile />
+            <IncludeLibs />
+            <IncludeLibsPath />
+            <Misc> --keep *.o(.rti_fn.*)   --keep *.o(FSymTab)</Misc>
+            <LinkerInputFile />
+            <DisabledWarnings />
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>
+        <Group>
+          <GroupName>Applications</GroupName>
+          <Files>
+            <File>
+              <FileName>application.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>applications\application.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Drivers</GroupName>
+          <Files>
+            <File>
+              <FileName>board.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>drivers\board.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>nuc472_eth.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>drivers\nuc472_eth.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>usart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>drivers\usart.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>CMSIS</GroupName>
+          <Files>
+            <File>
+              <FileName>system_NUC472_442.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\Device\Nuvoton\NUC472_442\Source\system_NUC472_442.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>startup_NUC472_442.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>Libraries\Device\Nuvoton\NUC472_442\Source\ARM\startup_NUC472_442.s</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>NUC472_StdPeriph</GroupName>
+          <Files>
+            <File>
+              <FileName>acmp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\acmp.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>adc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\adc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>can.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\can.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>cap.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\cap.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>clk.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\clk.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>crc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\crc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>crypto.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\crypto.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>eadc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\eadc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>ebi.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\ebi.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>emac.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\emac.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>epwm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\epwm.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>fmc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\fmc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>gpio.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\gpio.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>i2c.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\i2c.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>i2s.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\i2s.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>pdma.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\pdma.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>ps2.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\ps2.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>pwm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\pwm.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>rtc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\rtc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>sc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\sc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>scuart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\scuart.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>sd.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\sd.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>spi.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\spi.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>sys_.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\sys_.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>timer_.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\timer_.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\uart.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>usbd.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\usbd.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>wdt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\wdt.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>wwdt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>Libraries\StdDriver\src\wwdt.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>Kernel</GroupName>
+          <Files>
+            <File>
+              <FileName>clock.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\src\clock.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>components.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\src\components.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>device.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\src\device.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>idle.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\src\idle.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>ipc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\src\ipc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>irq.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\src\irq.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>kservice.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\src\kservice.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>mem.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\src\mem.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>mempool.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\src\mempool.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>object.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\src\object.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>scheduler.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\src\scheduler.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>signal.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\src\signal.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>thread.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\src\thread.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>timer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\src\timer.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>CORTEX-M4</GroupName>
+          <Files>
+            <File>
+              <FileName>cpuport.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\libcpu\arm\cortex-m4\cpuport.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>context_rvds.S</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\libcpu\arm\cortex-m4\context_rvds.S</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>backtrace.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\libcpu\arm\common\backtrace.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>div0.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\libcpu\arm\common\div0.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>showmem.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\libcpu\arm\common\showmem.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>DeviceDrivers</GroupName>
+          <Files>
+            <File>
+              <FileName>serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\drivers\serial\serial.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>completion.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\drivers\src\completion.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>dataqueue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\drivers\src\dataqueue.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>pipe.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\drivers\src\pipe.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>ringbuffer.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\drivers\src\ringbuffer.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>waitqueue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\drivers\src\waitqueue.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>workqueue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\drivers\src\workqueue.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>finsh</GroupName>
+          <Files>
+            <File>
+              <FileName>shell.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\finsh\shell.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>symbol.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\finsh\symbol.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>cmd.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\finsh\cmd.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>msh.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\finsh\msh.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>msh_cmd.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\finsh\msh_cmd.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>msh_file.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\finsh\msh_file.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>lwIP</GroupName>
+          <Files>
+            <File>
+              <FileName>sys_arch.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\arch\sys_arch.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>api_lib.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\api\api_lib.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>api_msg.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\api\api_msg.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>err.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\api\err.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>netbuf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\api\netbuf.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>netdb.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\api\netdb.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>netifapi.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\api\netifapi.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>sockets.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\api\sockets.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>tcpip.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\api\tcpip.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>def.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\def.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>dns.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\dns.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>inet_chksum.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\inet_chksum.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>init.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\init.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>ip.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\ip.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>memp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\memp.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>netif.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\netif.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>pbuf.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\pbuf.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>raw.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\raw.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stats.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\stats.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>sys.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\sys.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>tcp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\tcp.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>tcp_in.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\tcp_in.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>tcp_out.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\tcp_out.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>timeouts.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\timeouts.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>udp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\udp.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>ethernet.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\netif\ethernet.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>ethernetif.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\netif\ethernetif.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>lowpan6.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\netif\lowpan6.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>autoip.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\ipv4\autoip.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>dhcp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\ipv4\dhcp.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>etharp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\ipv4\etharp.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>icmp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\ipv4\icmp.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>igmp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\ipv4\igmp.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>ip4.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\ipv4\ip4.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>ip4_addr.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\ipv4\ip4_addr.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>ip4_frag.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\components\net\lwip-2.0.2\src\core\ipv4\ip4_frag.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+      </Groups>
+    </Target>
+  </Targets>
+</Project>

bsp/nuvoton_nuc472/template.uvproj

@@ -0,0 +1,407 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
+
+  <SchemaVersion>1.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>
+    <Target>
+      <TargetName>rtthread-nuc472</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>NUC472HI8AE</Device>
+          <Vendor>Nuvoton</Vendor>
+          <Cpu>IRAM(0x20000000-0x2000FFFF) IROM(0-0x7FFFF) CLOCK(84000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile>undefined</StartupFile>
+          <FlashDriverDll></FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile></RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>SFD\Nuvoton\NUC400_v1.SFR</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\build\</OutputDirectory>
+          <OutputName>template</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\build\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments></SimDllArguments>
+          <SimDlgDll>DARMCM1.DLL</SimDlgDll>
+          <SimDlgDllArguments></SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments></TargetDllArguments>
+          <TargetDlgDll>TARMCM1.DLL</TargetDlgDll>
+          <TargetDlgDllArguments></TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>1</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>0</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>0</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>1</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>
+            <UsePdscDebugDescription>1</UsePdscDebugDescription>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>-1</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver></Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>0</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
+            <Capability>0</Capability>
+            <DriverSelection>-1</DriverSelection>
+          </Flash1>
+          <bUseTDR>0</bUseTDR>
+          <Flash2></Flash2>
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>0</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x80000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x10000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>1</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>0</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>0</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>0</uC99>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x00000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+    </Target>
+  </Targets>
+
+</Project>