1
0
Эх сурвалжийг харах

【English Readme】stm32f412 nucleo add English version readme

mysterywolf 4 жил өмнө
parent
commit
39540fe0c0

+ 88 - 107
bsp/stm32/stm32f412-st-nucleo/README.md

@@ -1,107 +1,88 @@
-# NUCLEO-F412ZG 开发板 BSP 说明
-
-## 简介
-
-本文档为 RT-Thread 开发团队为 NUCLEO-F412ZG 开发板提供的 BSP (板级支持包) 说明。
-
-主要内容如下:
-
-- 开发板资源介绍
-- BSP 快速上手
-- 进阶使用方法
-
-通过阅读快速上手章节开发者可以快速地上手该 BSP,将 RT-Thread 运行在开发板上。在进阶使用指南章节,将会介绍更多高级功能,帮助开发者利用 RT-Thread 驱动更多板载资源。
-
-## 开发板介绍
-
-探索者 NUCLEO-F412ZG 是意法半导体推出的一款基于 ARM Cortex-M4 内核的开发板,最高主频为 100Mhz,该开发板具有丰富的板载资源,可以充分发挥 STM32F411ZG 的芯片性能。
-
-开发板外观如下图所示:
-
-![board](figures/board.png)
-
-该开发板常用 **板载资源** 如下:
-
-- MCU:STM32F412ZG,主频 100MHz,1024KB FLASH ,256KB RAM。
-- 常用外设
-  - LED:3 个,USB communication (LD1), user LED (LD2), power LED (LD3) 。
-  - 按键,2 个,USER and RESET 。
-- 常用接口:USB 支持 3 种不同接口:虚拟 COM 端口、大容量存储和调试端口。
-- 调试接口,板载 ST-LINK/V2-1 调试器。
-
-开发板更多详细信息请参考意法半导体 [NUCLEO-F412ZG 开发板介绍](https://www.st.com/en/evaluation-tools/nucleo-f412zg.html)。
-
-## 外设支持
-
-本 BSP 目前对外设的支持情况如下:
-
-| **片上外设** | **支持情况** |               **备注**                |
-| :------------ | :----------: | :-----------------------------------: |
-| GPIO         |     支持     | PA0, PA1... PH1 ---> PIN: 0, 1...63 |
-| UART         |     支持     |              UART2,UART3            |
-| Onchip Flash |     支持     |                                     |
-|  USB Device  |     支持     |                                     |
-
-## 使用说明
-
-使用说明分为如下两个章节:
-
-- 快速上手
-
-    本章节是为刚接触 RT-Thread 的新手准备的使用说明,遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上,看到实验效果 。
-
-- 进阶使用
-
-    本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置,可以开启更多板载资源,实现更多高级功能。
-
-
-### 快速上手
-
-本 BSP 为开发者提供 MDK5 和 IAR 工程,并且支持 GCC 开发环境。下面以 MDK5 开发环境为例,介绍如何将系统运行起来。
-
-#### 硬件连接
-
-使用 Type-A to Micro-B 线连接开发板和 PC 供电,红色 LED LD3 (PWR) 和 LD1 (COM) 会点亮。
-
-#### 编译下载
-
-双击 project.uvprojx 文件,打开 MDK5 工程,编译并下载程序到开发板。
-
-> 工程默认配置使用 ST-LINK 下载程序,点击下载按钮即可下载程序到开发板。
-
-#### 运行结果
-
-下载程序成功之后,系统会自动运行,观察开发板上 LED 的运行效果,红色 LD3 和 LD1 常亮、蓝色 LD2 会周期性闪烁。
-
-USB 虚拟 COM 端口默认连接串口 3,在终端工具里打开相应的串口(115200-8-1-N),复位设备后,可以看到 RT-Thread 的输出信息:
-
-```bash
- \ | /
-- RT -     Thread Operating System
- / | \     4.0.2 build Oct 20 2019
- 2006 - 2019 Copyright by rt-thread team
-msh >
-```
-### 进阶使用
-
-此 BSP 默认只开启了 GPIO 和 串口 3 的功能,更多高级功能需要利用 ENV 工具对 BSP 进行配置,步骤如下:
-
-1. 在 BSP 下打开 env 工具。
-
-2. 输入 `menuconfig` 命令配置工程,配置好之后保存退出。
-
-3. 输入 `pkgs --update` 命令更新软件包。
-
-4. 输入 `scons --target=mdk5/iar` 命令重新生成工程。
-
-本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32 系列 BSP 外设驱动使用教程. md)。
-
-## 注意事项
-
-暂无
-
-## 联系人信息
-
-维护人:
-
-- [flybreak](https://github.com/guozhanxin) ,邮箱:<g1171407708@163.com>
+# STM32F412-Nucleo BSP Introduction
+
+[中文](README_zh.md) 
+
+## MCU: STM32F412ZG @100MHz, 1024KB FLASH,  256KB RAM
+
+STM32F412xE/G devices are based on the high-performance Arm® Cortex® -M4 32-bit RISC core operating at a frequency of up to 100 MHz. Their Cortex®-M4 core features a Floating point unit (FPU) single precision which supports all Arm single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.
+
+STM32F412xE/G devices belong to the STM32 Dynamic Efficiency™ product line (with products combining power efficiency, performance and integration) while adding a new innovative feature called Batch Acquisition Mode (BAM) allowing even more power consumption saving during data batching.
+STM32F412xE/G devices incorporate high-speed embedded memories (up to 1 Mbyte of Flash memory, 256 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix.
+All devices offer one 12-bit ADC, a low-power RTC, twelve general-purpose 16-bit timers, two PWM timers for motor control and two general-purpose 32-bit timers.
+They also feature standard and advanced communication interfaces:
+In addition, STM32F412xE/G devices embed advanced peripherals:
+STM32F412xE/G devices are offered in 7 packages ranging from 48 to 144 pins. The set of available peripherals depends on the selected package.
+The STM32F412xE/G operates in the -40 to +125 °C temperature range from a 1.7 (PDR OFF) to 3.6 V power supply. A comprehensive set of power-saving modes allows the design of low-power applications.
+These features make the STM32F412xE/G microcontrollers suitable for a wide range of applications.
+
+#### KEY FEATURES
+
+- Dynamic Efficiency Line with BAM (Batch Acquisition Mode)
+- Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 100 MHz, memory protection unit, 125 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
+- Memories
+  - Up to 1 Mbyte of Flash memory
+  - 256 Kbyte of SRAM
+  - Flexible external static memory controller with up to 16-bit data bus: SRAM, PSRAM, NOR Flash memory
+  - Dual mode Quad-SPI interface
+- LCD parallel interface, 8080/6800 modes
+- Clock, reset and supply management
+  - 1.7 V to 3.6 V application supply and I/Os
+  - POR, PDR, PVD and BOR
+  - 4-to-26 MHz crystal oscillator
+  - Internal 16 MHz factory-trimmed RC
+  - 32 kHz oscillator for RTC with calibration
+  - Internal 32 kHz RC with calibration
+- Power consumption
+  - Run: 112 μA/MHz (peripheral off)
+  - Stop (Flash in Stop mode, fast wakeup time): 50 μA Typ @ 25 °C; 75 μA max @25 °C
+  - Stop (Flash in Deep power down mode, slow wakeup time): down to 18 μA @ 25 °C; 40 μA max @25 °C
+  - Standby: 2.4 μA @25 °C / 1.7 V without RTC; 12 μA @85 °C @1.7 V
+  - VBAT supply for RTC: 1 μA @25 °C
+- 1×12-bit, 2.4 MSPS ADC: up to 16 channels
+- 2x digital filters for sigma delta modulator, 4x PDM interfaces, stereo microphone support
+- General-purpose DMA: 16-stream DMA
+
+- Up to 17 timers: up to twelve 16-bit timers, two 32-bit timers up to 100 MHz each with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input, two watchdog timers (independent and window), one SysTick timer
+- Debug mode
+  - Serial wire debug (SWD) & JTAG
+  - Cortex®-M4 Embedded Trace Macrocell™
+- Up to 114 I/O ports with interrupt capability
+  - Up to 109 fast I/Os up to 100 MHz
+  - Up to 114 five V-tolerant I/Os
+- Up to 17 communication interfaces
+  - Up to 4x I2C interfaces (SMBus/PMBus)
+  - Up to 4 USARTs (2 x 12.5 Mbit/s, 2 x 6.25 Mbit/s), ISO 7816 interface, LIN, IrDA, modem control)
+  - Up to 5 SPI/I2Ss (up to 50 Mbit/s, SPI or I2S audio protocol), out of which 2 muxed full-duplex I2S interfaces
+  - SDIO interface (SD/MMC/eMMC)
+  - Advanced connectivity: USB 2.0 full-speed device/host/OTG controller with PHY
+  - 2x CAN (2.0B Active)
+- True random number generator
+- CRC calculation unit
+- 96-bit unique ID
+- RTC: subsecond accuracy, hardware calendar
+- All packages are ECOPACK®2
+
+
+
+## Read more
+
+|                          Documents                           |                         Description                          |
+| :----------------------------------------------------------: | :----------------------------------------------------------: |
+| [STM32_Nucleo-144_BSP_Introduction](../docs/STM32_Nucleo-144_BSP_Introduction.md) | How to run RT-Thread on STM32 Nucleo-144 boards (**Must-Read**) |
+| [STM32F412ZG ST Official Website](https://www.st.com/en/microcontrollers-microprocessors/stm32f412zg.html#documentation) |          STM32F412ZG datasheet and other resources           |
+
+
+
+## Maintained By
+
+[flybreak](https://github.com/guozhanxin)  g1171407708@163.com
+
+
+
+## Translated By
+
+Meco Man @ RT-Thread Community
+
+> jiantingman@foxmail.com 
+>
+> https://github.com/mysterywolf

+ 107 - 0
bsp/stm32/stm32f412-st-nucleo/README_zh.md

@@ -0,0 +1,107 @@
+# NUCLEO-F412ZG 开发板 BSP 说明
+
+## 简介
+
+本文档为 RT-Thread 开发团队为 NUCLEO-F412ZG 开发板提供的 BSP (板级支持包) 说明。
+
+主要内容如下:
+
+- 开发板资源介绍
+- BSP 快速上手
+- 进阶使用方法
+
+通过阅读快速上手章节开发者可以快速地上手该 BSP,将 RT-Thread 运行在开发板上。在进阶使用指南章节,将会介绍更多高级功能,帮助开发者利用 RT-Thread 驱动更多板载资源。
+
+## 开发板介绍
+
+探索者 NUCLEO-F412ZG 是意法半导体推出的一款基于 ARM Cortex-M4 内核的开发板,最高主频为 100Mhz,该开发板具有丰富的板载资源,可以充分发挥 STM32F411ZG 的芯片性能。
+
+开发板外观如下图所示:
+
+![board](figures/board.png)
+
+该开发板常用 **板载资源** 如下:
+
+- MCU:STM32F412ZG,主频 100MHz,1024KB FLASH ,256KB RAM。
+- 常用外设
+  - LED:3 个,USB communication (LD1), user LED (LD2), power LED (LD3) 。
+  - 按键,2 个,USER and RESET 。
+- 常用接口:USB 支持 3 种不同接口:虚拟 COM 端口、大容量存储和调试端口。
+- 调试接口,板载 ST-LINK/V2-1 调试器。
+
+开发板更多详细信息请参考意法半导体 [NUCLEO-F412ZG 开发板介绍](https://www.st.com/en/evaluation-tools/nucleo-f412zg.html)。
+
+## 外设支持
+
+本 BSP 目前对外设的支持情况如下:
+
+| **片上外设** | **支持情况** |               **备注**                |
+| :------------ | :----------: | :-----------------------------------: |
+| GPIO         |     支持     | PA0, PA1... PH1 ---> PIN: 0, 1...63 |
+| UART         |     支持     |              UART2,UART3            |
+| Onchip Flash |     支持     |                                     |
+|  USB Device  |     支持     |                                     |
+
+## 使用说明
+
+使用说明分为如下两个章节:
+
+- 快速上手
+
+    本章节是为刚接触 RT-Thread 的新手准备的使用说明,遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上,看到实验效果 。
+
+- 进阶使用
+
+    本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置,可以开启更多板载资源,实现更多高级功能。
+
+
+### 快速上手
+
+本 BSP 为开发者提供 MDK5 和 IAR 工程,并且支持 GCC 开发环境。下面以 MDK5 开发环境为例,介绍如何将系统运行起来。
+
+#### 硬件连接
+
+使用 Type-A to Micro-B 线连接开发板和 PC 供电,红色 LED LD3 (PWR) 和 LD1 (COM) 会点亮。
+
+#### 编译下载
+
+双击 project.uvprojx 文件,打开 MDK5 工程,编译并下载程序到开发板。
+
+> 工程默认配置使用 ST-LINK 下载程序,点击下载按钮即可下载程序到开发板。
+
+#### 运行结果
+
+下载程序成功之后,系统会自动运行,观察开发板上 LED 的运行效果,红色 LD3 和 LD1 常亮、蓝色 LD2 会周期性闪烁。
+
+USB 虚拟 COM 端口默认连接串口 3,在终端工具里打开相应的串口(115200-8-1-N),复位设备后,可以看到 RT-Thread 的输出信息:
+
+```bash
+ \ | /
+- RT -     Thread Operating System
+ / | \     4.0.2 build Oct 20 2019
+ 2006 - 2019 Copyright by rt-thread team
+msh >
+```
+### 进阶使用
+
+此 BSP 默认只开启了 GPIO 和 串口 3 的功能,更多高级功能需要利用 ENV 工具对 BSP 进行配置,步骤如下:
+
+1. 在 BSP 下打开 env 工具。
+
+2. 输入 `menuconfig` 命令配置工程,配置好之后保存退出。
+
+3. 输入 `pkgs --update` 命令更新软件包。
+
+4. 输入 `scons --target=mdk5/iar` 命令重新生成工程。
+
+本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32 系列 BSP 外设驱动使用教程. md)。
+
+## 注意事项
+
+暂无
+
+## 联系人信息
+
+维护人:
+
+- [flybreak](https://github.com/guozhanxin) ,邮箱:<g1171407708@163.com>