add stm32sky bsp.

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@12 bbd45198-f89e-11dd-88c7-29a3b14d5316

bsp/stm32sky001/application.c

@@ -0,0 +1,27 @@
+/*
+ * File      : application.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006, RT-Thread Development Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rt-thread.org/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2009-01-05     Bernard      the first version
+ */
+
+/**
+ * @addtogroup STM32
+ */
+/*@{*/
+
+#include <rtthread.h>
+
+int rt_application_init()
+{
+	return 0;
+}
+
+/*@}*/

bsp/stm32sky001/board.c

@@ -0,0 +1,231 @@
+/*
+ * File      : board.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006 - 2009 RT-Thread Develop Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://openlab.rt-thread.com/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2006-08-23     Bernard      first implementation
+ */
+
+#include <rthw.h>
+#include <rtthread.h>
+
+#include "stm32f10x_lib.h"
+
+static void rt_hw_console_init(void);
+
+/**
+ * @addtogroup STM32SKY
+ */
+
+/*@{*/
+
+ErrorStatus HSEStartUpStatus;
+
+/*******************************************************************************
+ * Function Name  : RCC_Configuration
+ * Description    : Configures the different system clocks.
+ * Input          : None
+ * Output         : None
+ * Return         : None
+ *******************************************************************************/
+void RCC_Configuration(void)
+{
+	/* RCC system reset(for debug purpose) */
+	RCC_DeInit();
+
+	/* Enable HSE */
+	RCC_HSEConfig(RCC_HSE_ON);
+
+	/* Wait till HSE is ready */
+	HSEStartUpStatus = RCC_WaitForHSEStartUp();
+
+	if(HSEStartUpStatus == SUCCESS)
+	{
+		/* HCLK = SYSCLK */
+		RCC_HCLKConfig(RCC_SYSCLK_Div1);
+
+		/* PCLK2 = HCLK */
+		RCC_PCLK2Config(RCC_HCLK_Div1);
+		/* PCLK1 = HCLK/2 */
+		RCC_PCLK1Config(RCC_HCLK_Div2);
+
+		/* Flash 2 wait state */
+		FLASH_SetLatency(FLASH_Latency_2);
+		/* Enable Prefetch Buffer */
+		FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable);
+
+		/* PLLCLK = 8MHz * 9 = 72 MHz */
+		RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9);
+
+		/* Enable PLL */
+		RCC_PLLCmd(ENABLE);
+
+		/* Wait till PLL is ready */
+		while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET) ;
+
+		/* Select PLL as system clock source */
+		RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
+
+		/* Wait till PLL is used as system clock source */
+		while(RCC_GetSYSCLKSource() != 0x08) ;
+	}
+}
+
+/*******************************************************************************
+* Function Name  : NVIC_Configuration
+* Description    : Configures Vector Table base location.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void NVIC_Configuration(void)
+{
+#ifdef  VECT_TAB_RAM
+	/* Set the Vector Table base location at 0x20000000 */
+	NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0);
+#else  /* VECT_TAB_FLASH  */
+	/* Set the Vector Table base location at 0x08000000 */
+	NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0);
+#endif
+}
+
+/*******************************************************************************
+ * Function Name  : SysTick_Configuration
+ * Description    : Configures the SysTick for OS tick.
+ * Input          : None
+ * Output         : None
+ * Return         : None
+ *******************************************************************************/
+void  SysTick_Configuration(void)
+{
+    RCC_ClocksTypeDef  rcc_clocks;
+    rt_uint32_t         cnts;
+
+    RCC_GetClocksFreq(&rcc_clocks);
+
+    cnts = (rt_uint32_t)rcc_clocks.HCLK_Frequency / RT_TICK_PER_SECOND;
+
+    SysTick_SetReload(cnts);
+    SysTick_CLKSourceConfig(SysTick_CLKSource_HCLK);
+    SysTick_CounterCmd(SysTick_Counter_Enable);
+    SysTick_ITConfig(ENABLE);
+}
+
+extern void rt_hw_interrupt_thread_switch(void);
+/**
+ * This is the timer interrupt service routine.
+ * 
+ */
+void rt_hw_timer_handler(void)
+{
+	/* enter interrupt */
+	rt_interrupt_enter();
+
+	rt_tick_increase();
+	
+	/* leave interrupt */
+	rt_interrupt_leave();
+	rt_hw_interrupt_thread_switch();
+}
+
+/**
+ * This function will initial STM32 board.
+ */
+void rt_hw_board_init()
+{
+	/* Configure the system clocks */
+	RCC_Configuration();
+
+	/* NVIC Configuration */
+	NVIC_Configuration();
+	
+	/* Configure the SysTick */
+	SysTick_Configuration();
+	
+	rt_hw_console_init();
+}
+
+/* init console to support rt_kprintf */
+static void rt_hw_console_init()
+{
+	/* Enable USART1 and GPIOA clocks */
+	RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE);
+
+	/* GPIO configuration */
+	{
+	GPIO_InitTypeDef GPIO_InitStructure;
+
+	/* Configure USART1 Tx (PA.09) as alternate function push-pull */
+	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+	GPIO_Init(GPIOA, &GPIO_InitStructure);
+
+	/* Configure USART1 Rx (PA.10) as input floating */
+	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+	GPIO_Init(GPIOA, &GPIO_InitStructure);
+	}
+
+	/* USART configuration */
+	{
+	USART_InitTypeDef USART_InitStructure;
+	
+	/* USART1 configured as follow:
+		- BaudRate = 115200 baud
+		- Word Length = 8 Bits
+		- One Stop Bit
+		- No parity
+		- Hardware flow control disabled (RTS and CTS signals)
+		- Receive and transmit enabled
+		- USART Clock disabled
+		- USART CPOL: Clock is active low
+		- USART CPHA: Data is captured on the middle
+		- USART LastBit: The clock pulse of the last data bit is not output to
+		  the SCLK pin
+	*/
+	USART_InitStructure.USART_BaudRate = 115200;
+	USART_InitStructure.USART_WordLength = USART_WordLength_8b;
+	USART_InitStructure.USART_StopBits = USART_StopBits_1;
+	USART_InitStructure.USART_Parity = USART_Parity_No;
+	USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
+	USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
+	USART_Init(USART1, &USART_InitStructure);
+	/* Enable USART1 */
+	USART_Cmd(USART1, ENABLE);
+	}
+}
+
+/* write one character to serial, must not trigger interrupt */
+static void rt_hw_console_putc(const char c)
+{
+	/*
+		to be polite with serial console add a line feed
+		to the carriage return character
+	*/
+	if (c=='\n')rt_hw_console_putc('\r');
+
+	while (!(USART1->SR & USART_FLAG_TXE));
+	USART1->DR = (c & 0x1FF);
+}
+
+/**
+ * This function is used by rt_kprintf to display a string on console.
+ * 
+ * @param str the displayed string
+ */
+void rt_hw_console_output(const char* str)
+{
+	while (*str)
+	{
+		rt_hw_console_putc (*str++);
+	}
+}
+
+/*@}*/

bsp/stm32sky001/board.h

@@ -0,0 +1,25 @@
+/*
+ * File      : board.h
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006, RT-Thread Develop Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://openlab.rt-thread.com/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2006-10-08     Bernard      add board.h to this bsp
+ */
+
+#ifndef __BOARD_H__
+#define __BOARD_H__
+
+void rt_hw_board_led_on(int n);
+void rt_hw_board_led_off(int n);
+void rt_hw_board_init(void);
+
+void rt_hw_usart_init(void);
+void rt_hw_sdcard_init(void);
+
+#endif

bsp/stm32sky001/cortexm3_macro.s

@@ -0,0 +1,279 @@
+;******************** (C) COPYRIGHT 2007 STMicroelectronics ********************
+;* File Name          : cortexm3_macro.s
+;* Author             : MCD Application Team
+;* Version            : V1.1
+;* Date               : 11/26/2007
+;* Description        : Instruction wrappers for special Cortex-M3 instructions.
+;*******************************************************************************
+; THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+; CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+;*******************************************************************************
+    
+  THUMB
+  REQUIRE8
+  PRESERVE8
+    
+  AREA |.text|, CODE, READONLY, ALIGN=2
+
+  ; Exported functions
+  EXPORT __WFI
+  EXPORT __WFE
+  EXPORT __SEV
+  EXPORT __ISB
+  EXPORT __DSB
+  EXPORT __DMB
+  EXPORT __SVC
+  EXPORT __MRS_CONTROL
+  EXPORT __MSR_CONTROL
+  EXPORT __MRS_PSP
+  EXPORT __MSR_PSP
+  EXPORT __MRS_MSP
+  EXPORT __MSR_MSP   
+  EXPORT __SETPRIMASK
+  EXPORT __RESETPRIMASK
+  EXPORT __SETFAULTMASK
+  EXPORT __RESETFAULTMASK
+  EXPORT __BASEPRICONFIG
+  EXPORT __GetBASEPRI
+  EXPORT __REV_HalfWord
+  EXPORT __REV_Word
+
+;*******************************************************************************
+; Function Name  : __WFI
+; Description    : Assembler function for the WFI instruction.
+; Input          : None
+; Return         : None
+;*******************************************************************************
+__WFI 
+ 
+    WFI
+    BX r14
+
+;*******************************************************************************
+; Function Name  : __WFE
+; Description    : Assembler function for the WFE instruction.
+; Input          : None
+; Return         : None
+;*******************************************************************************
+__WFE
+
+    WFE
+    BX r14
+
+;*******************************************************************************
+; Function Name  : __SEV
+; Description    : Assembler function for the SEV instruction.
+; Input          : None
+; Return         : None
+;*******************************************************************************
+__SEV
+
+    SEV
+    BX r14
+
+;*******************************************************************************
+; Function Name  : __ISB
+; Description    : Assembler function for the ISB instruction.
+; Input          : None
+; Return         : None
+;*******************************************************************************
+__ISB
+
+    ISB
+    BX r14
+
+;*******************************************************************************
+; Function Name  : __DSB
+; Description    : Assembler function for the DSB instruction.
+; Input          : None
+; Return         : None
+;*******************************************************************************
+__DSB
+
+    DSB
+    BX r14
+
+;*******************************************************************************
+; Function Name  : __DMB
+; Description    : Assembler function for the DMB instruction.
+; Input          : None
+; Return         : None
+;*******************************************************************************
+__DMB
+
+    DMB
+    BX r14
+
+;*******************************************************************************
+; Function Name  : __SVC
+; Description    : Assembler function for the SVC instruction.
+; Input          : None
+; Return         : None
+;*******************************************************************************
+__SVC
+
+    SVC 0x01
+    BX r14
+
+;*******************************************************************************
+; Function Name  : __MRS_CONTROL
+; Description    : Assembler function for the MRS instruction.
+; Input          : None
+; Return         : - r0 : Cortex-M3 CONTROL register value.
+;*******************************************************************************
+__MRS_CONTROL
+
+  MRS r0, CONTROL
+  BX r14
+
+;*******************************************************************************
+; Function Name  : __MSR_CONTROL
+; Description    : Assembler function for the MSR instruction.
+; Input          : - r0 : Cortex-M3 CONTROL register new value.  
+; Return         : None
+;*******************************************************************************
+__MSR_CONTROL
+
+  MSR CONTROL, r0
+  ISB
+  BX r14
+
+;*******************************************************************************
+; Function Name  : __MRS_PSP
+; Description    : Assembler function for the MRS instruction.
+; Input          : None
+; Return         : - r0 : Process Stack value.
+;*******************************************************************************
+__MRS_PSP
+
+  MRS r0, PSP
+  BX r14
+
+;*******************************************************************************
+; Function Name  : __MSR_PSP
+; Description    : Assembler function for the MSR instruction.
+; Input          : - r0 : Process Stack new value.  
+; Return         : None
+;*******************************************************************************
+__MSR_PSP 
+ 
+    MSR PSP, r0 ; set Process Stack value
+    BX r14
+
+;*******************************************************************************
+; Function Name  : __MRS_MSP
+; Description    : Assembler function for the MRS instruction.
+; Input          : None
+; Return         : - r0 : Main Stack value.
+;*******************************************************************************
+__MRS_MSP
+
+  MRS r0, MSP
+  BX r14
+
+;*******************************************************************************
+; Function Name  : __MSR_MSP
+; Description    : Assembler function for the MSR instruction.
+; Input          : - r0 : Main Stack new value.  
+; Return         : None
+;*******************************************************************************
+__MSR_MSP 
+ 
+    MSR MSP, r0 ; set Main Stack value
+    BX r14
+
+;*******************************************************************************
+; Function Name  : __SETPRIMASK
+; Description    : Assembler function to set the PRIMASK.
+; Input          : None 
+; Return         : None
+;*******************************************************************************
+__SETPRIMASK
+
+  CPSID i
+  BX r14
+
+;*******************************************************************************
+; Function Name  : __RESETPRIMASK
+; Description    : Assembler function to reset the PRIMASK.
+; Input          : None 
+; Return         : None
+;*******************************************************************************
+__RESETPRIMASK
+
+  CPSIE i
+  BX r14
+
+;*******************************************************************************
+; Function Name  : __SETFAULTMASK
+; Description    : Assembler function to set the FAULTMASK.
+; Input          : None 
+; Return         : None
+;*******************************************************************************
+__SETFAULTMASK
+
+  CPSID f
+  BX r14
+
+;*******************************************************************************
+; Function Name  : __RESETFAULTMASK
+; Description    : Assembler function to reset the FAULTMASK.
+; Input          : None 
+; Return         : None
+;*******************************************************************************
+__RESETFAULTMASK
+
+  CPSIE f
+  BX r14
+
+;*******************************************************************************
+; Function Name  : __BASEPRICONFIG
+; Description    : Assembler function to set the Base Priority.
+; Input          : - r0 : Base Priority new value  
+; Return         : None
+;*******************************************************************************
+__BASEPRICONFIG
+
+  MSR BASEPRI, r0
+  BX r14
+
+;*******************************************************************************
+; Function Name  : __GetBASEPRI
+; Description    : Assembler function to get the Base Priority value.
+; Input          : None 
+; Return         : - r0 : Base Priority value 
+;*******************************************************************************
+__GetBASEPRI
+
+  MRS r0, BASEPRI_MAX
+  BX r14
+
+;*******************************************************************************
+; Function Name  : __REV_HalfWord
+; Description    : Reverses the byte order in HalfWord(16-bit) input variable.
+; Input          : - r0 : specifies the input variable
+; Return         : - r0 : holds tve variable value after byte reversing.
+;*******************************************************************************
+__REV_HalfWord 
+ 
+  REV16 r0, r0
+  BX r14
+
+;*******************************************************************************
+; Function Name  : __REV_Word
+; Description    : Reverses the byte order in Word(32-bit) input variable.
+; Input          : - r0 : specifies the input variable
+; Return         : - r0 : holds tve variable value after byte reversing.
+;*******************************************************************************
+__REV_Word 
+ 
+  REV r0, r0
+  BX r14
+    
+  END
+  
+;******************* (C) COPYRIGHT 2007 STMicroelectronics *****END OF FILE*****

bsp/stm32sky001/enc28j60.c

@@ -0,0 +1,727 @@
+#include "enc28j60.h"
+
+#include <netif/ethernetif.h>
+#include "lwipopts.h"
+#include "stm32f10x_lib.h"
+
+#define MAX_ADDR_LEN    6
+
+// #define CSACTIVE    GPIO_ResetBits(GPIOB,  GPIO_Pin_12);
+// #define CSPASSIVE   GPIO_SetBits(GPIOB,  GPIO_Pin_12);
+#define CSACTIVE 	GPIOB->BRR = GPIO_Pin_12;
+#define CSPASSIVE	GPIOB->BSRR = GPIO_Pin_12;
+
+struct net_device
+{
+	/* inherit from ethernet device */
+	struct eth_device parent;
+
+	/* interface address info. */
+	rt_uint8_t  dev_addr[MAX_ADDR_LEN];			/* hw address	*/
+};
+
+static struct net_device  enc28j60_dev_entry;
+static struct net_device *enc28j60_dev =&enc28j60_dev_entry;
+static rt_uint8_t  Enc28j60Bank;
+static rt_uint16_t NextPacketPtr;
+static struct rt_semaphore tx_sem;
+
+void _delay_us(rt_uint32_t us)
+{
+	rt_uint32_t len;
+	for (;us > 0; us --)
+		for (len = 0; len < 20; len++ );
+}
+
+void delay_ms(rt_uint32_t ms)
+{
+	rt_uint32_t len;
+	for (;ms > 0; ms --)
+		for (len = 0; len < 100; len++ );
+}
+
+rt_uint8_t spi_read_op(rt_uint8_t op, rt_uint8_t address)
+{
+	int temp=0;
+	CSACTIVE;
+
+	SPI_I2S_SendData(SPI2, (op | (address & ADDR_MASK)));
+	while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET);
+	SPI_I2S_ReceiveData(SPI2);
+	SPI_I2S_SendData(SPI2, 0x00);
+	while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET);
+
+	// do dummy read if needed (for mac and mii, see datasheet page 29)
+	if(address & 0x80)
+	{
+		SPI_I2S_ReceiveData(SPI2);
+		SPI_I2S_SendData(SPI2, 0x00);
+		while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET);
+	}
+	// release CS
+
+	temp=SPI_I2S_ReceiveData(SPI2);
+	// for(t=0;t<20;t++);
+	CSPASSIVE;
+	return (temp);
+}
+
+void spi_write_op(rt_uint8_t op, rt_uint8_t address, rt_uint8_t data)
+{
+	rt_uint32_t level;
+	
+	level = rt_hw_interrupt_disable();
+	
+	CSACTIVE;
+	SPI_I2S_SendData(SPI2, op | (address & ADDR_MASK));
+	while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET);
+	SPI_I2S_SendData(SPI2,data);
+	while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET);
+	CSPASSIVE;
+	
+	rt_hw_interrupt_enable(level);
+}
+
+void enc28j60_set_bank(rt_uint8_t address)
+{
+	// set the bank (if needed)
+	if((address & BANK_MASK) != Enc28j60Bank)
+	{
+		// set the bank
+		spi_write_op(ENC28J60_BIT_FIELD_CLR, ECON1, (ECON1_BSEL1|ECON1_BSEL0));
+		spi_write_op(ENC28J60_BIT_FIELD_SET, ECON1, (address & BANK_MASK)>>5);
+		Enc28j60Bank = (address & BANK_MASK);
+	}
+}
+
+rt_uint8_t spi_read(rt_uint8_t address)
+{
+	// set the bank
+	enc28j60_set_bank(address);
+	// do the read
+	return spi_read_op(ENC28J60_READ_CTRL_REG, address);
+}
+
+void spi_write(rt_uint8_t address, rt_uint8_t data)
+{
+	// set the bank
+	enc28j60_set_bank(address);
+	// do the write
+	spi_write_op(ENC28J60_WRITE_CTRL_REG, address, data);
+}
+
+void enc28j60_phy_write(rt_uint8_t address, rt_uint16_t data)
+{
+	// set the PHY register address
+	spi_write(MIREGADR, address);
+
+	// write the PHY data
+	spi_write(MIWRL, data);
+	spi_write(MIWRH, data>>8);
+
+	// wait until the PHY write completes
+	while(spi_read(MISTAT) & MISTAT_BUSY)
+	{
+		_delay_us(15);
+	}
+}
+
+// read upper 8 bits
+rt_uint16_t enc28j60_phy_read(rt_uint8_t address)
+{
+	// Set the right address and start the register read operation
+	spi_write(MIREGADR, address);
+	spi_write(MICMD, MICMD_MIIRD);
+
+	_delay_us(15);
+
+	// wait until the PHY read completes
+	while(spi_read(MISTAT) & MISTAT_BUSY);
+
+	// reset reading bit
+	spi_write(MICMD, 0x00);
+
+	return (spi_read(MIRDH));
+}
+
+void enc28j60_clkout(rt_uint8_t clk)
+{
+	//setup clkout: 2 is 12.5MHz:
+	spi_write(ECOCON, clk & 0x7);
+}
+
+/*
+ * Access the PHY to determine link status
+ */
+static void enc28j60_check_link_status()
+{
+	rt_uint16_t reg;
+	int duplex;
+
+	reg = enc28j60_phy_read(PHSTAT2);
+	duplex = reg & PHSTAT2_DPXSTAT;
+
+	if (reg & PHSTAT2_LSTAT)
+	{
+	    /* on */
+	}
+	else
+	{
+	    /* off */
+	}
+}
+
+#ifdef RT_USING_FINSH
+#include <finsh.h>
+/*
+ * Debug routine to dump useful register contents
+ */
+static void enc28j60(void)
+{
+	rt_kprintf("-- enc28j60 registers:\n");
+	rt_kprintf("HwRevID: 0x%02x\n", spi_read(EREVID));
+	rt_kprintf("Cntrl: ECON1 ECON2 ESTAT  EIR  EIE\n");
+	rt_kprintf("       0x%02x  0x%02x  0x%02x  0x%02x  0x%02x\n",spi_read(ECON1), spi_read(ECON2), spi_read(ESTAT), spi_read(EIR), spi_read(EIE));
+	rt_kprintf("MAC  : MACON1 MACON3 MACON4\n");
+	rt_kprintf("       0x%02x   0x%02x   0x%02x\n", spi_read(MACON1), spi_read(MACON3), spi_read(MACON4));
+	rt_kprintf("Rx   : ERXST  ERXND  ERXWRPT ERXRDPT ERXFCON EPKTCNT MAMXFL\n");
+	rt_kprintf("       0x%04x 0x%04x 0x%04x  0x%04x  ",
+		(spi_read(ERXSTH) << 8) | spi_read(ERXSTL),
+		(spi_read(ERXNDH) << 8) | spi_read(ERXNDL),
+		(spi_read(ERXWRPTH) << 8) | spi_read(ERXWRPTL),
+		(spi_read(ERXRDPTH) << 8) | spi_read(ERXRDPTL));
+	rt_kprintf("0x%02x    0x%02x    0x%04x\n", spi_read(ERXFCON), spi_read(EPKTCNT),
+		(spi_read(MAMXFLH) << 8) | spi_read(MAMXFLL));
+
+	rt_kprintf("Tx   : ETXST  ETXND  MACLCON1 MACLCON2 MAPHSUP\n");
+	rt_kprintf("       0x%04x 0x%04x 0x%02x     0x%02x     0x%02x\n",
+		(spi_read(ETXSTH) << 8) | spi_read(ETXSTL),
+		(spi_read(ETXNDH) << 8) | spi_read(ETXNDL),
+		spi_read(MACLCON1), spi_read(MACLCON2), spi_read(MAPHSUP));
+}
+FINSH_FUNCTION_EXPORT(enc28j60, dump enc28j60 registers)
+#endif
+
+/*
+ * RX handler
+ * ignore PKTIF because is unreliable! (look at the errata datasheet)
+ * check EPKTCNT is the suggested workaround.
+ * We don't need to clear interrupt flag, automatically done when
+ * enc28j60_hw_rx() decrements the packet counter.
+ * Returns how many packet processed.
+ */
+void enc28j60_isr()
+{
+	/* Variable definitions can be made now. */
+	volatile rt_uint32_t eir, pk_counter;
+	volatile rt_bool_t rx_activiated;
+	
+	rx_activiated = RT_FALSE;
+	
+	/* get EIR */
+	eir = spi_read(EIR);
+	// rt_kprintf("eir: 0x%08x\n", eir);
+
+	do
+	{
+		/* errata #4, PKTIF does not reliable */
+	    pk_counter = spi_read(EPKTCNT);
+	    if (pk_counter)
+	    {
+	        rt_err_t result;
+	        /* a frame has been received */
+	        result = eth_device_ready((struct eth_device*)&(enc28j60_dev->parent));
+	        RT_ASSERT(result == RT_EOK);
+			
+			// switch to bank 0
+			enc28j60_set_bank(EIE);
+			// disable rx interrutps
+			spi_write_op(ENC28J60_BIT_FIELD_CLR, EIE, EIE_PKTIE);
+	    }
+	
+		/* clear PKTIF */
+		if (eir & EIR_PKTIF)
+		{
+			enc28j60_set_bank(EIR);
+			spi_write_op(ENC28J60_BIT_FIELD_CLR, EIR, EIR_PKTIF);
+			
+			rx_activiated = RT_TRUE;
+		}
+	
+		/* clear DMAIF */
+	    if (eir & EIR_DMAIF)
+		{
+			enc28j60_set_bank(EIR);
+			spi_write_op(ENC28J60_BIT_FIELD_CLR, EIR, EIR_DMAIF);
+		}
+	
+	    /* LINK changed handler */
+	    if ( eir & EIR_LINKIF)
+	    {
+	        enc28j60_check_link_status();
+	
+	        /* read PHIR to clear the flag */
+	        enc28j60_phy_read(PHIR);
+	
+			enc28j60_set_bank(EIR);
+			spi_write_op(ENC28J60_BIT_FIELD_CLR, EIR, EIR_LINKIF);
+	    }
+	
+		if (eir & EIR_TXIF)
+		{
+			/* A frame has been transmitted. */
+			rt_sem_release(&tx_sem);
+	
+			enc28j60_set_bank(EIR);
+			spi_write_op(ENC28J60_BIT_FIELD_CLR, EIR, EIR_TXIF);
+		}
+		eir = spi_read(EIR);
+		// rt_kprintf("inner eir: 0x%08x\n", eir);
+	} while ((rx_activiated != RT_TRUE && eir != 0));
+}
+
+/* RT-Thread Device Interface */
+
+/* initialize the interface */
+rt_err_t enc28j60_init(rt_device_t dev)
+{
+	CSPASSIVE;
+
+	// perform system reset
+	spi_write_op(ENC28J60_SOFT_RESET, 0, ENC28J60_SOFT_RESET);
+	delay_ms(50);
+	NextPacketPtr = RXSTART_INIT;
+
+    // Rx start
+	spi_write(ERXSTL, RXSTART_INIT&0xFF);
+	spi_write(ERXSTH, RXSTART_INIT>>8);
+	// set receive pointer address
+	spi_write(ERXRDPTL, RXSTOP_INIT&0xFF);
+	spi_write(ERXRDPTH, RXSTOP_INIT>>8);
+	// RX end
+	spi_write(ERXNDL, RXSTOP_INIT&0xFF);
+	spi_write(ERXNDH, RXSTOP_INIT>>8);
+
+	// TX start
+	spi_write(ETXSTL, TXSTART_INIT&0xFF);
+	spi_write(ETXSTH, TXSTART_INIT>>8);
+	// set transmission pointer address
+	spi_write(EWRPTL, TXSTART_INIT&0xFF);
+	spi_write(EWRPTH, TXSTART_INIT>>8);
+	// TX end
+	spi_write(ETXNDL, TXSTOP_INIT&0xFF);
+	spi_write(ETXNDH, TXSTOP_INIT>>8);
+
+	// do bank 1 stuff, packet filter:
+    // For broadcast packets we allow only ARP packtets
+    // All other packets should be unicast only for our mac (MAADR)
+    //
+    // The pattern to match on is therefore
+    // Type     ETH.DST
+    // ARP      BROADCAST
+    // 06 08 -- ff ff ff ff ff ff -> ip checksum for theses bytes=f7f9
+    // in binary these poitions are:11 0000 0011 1111
+    // This is hex 303F->EPMM0=0x3f,EPMM1=0x30
+	spi_write(ERXFCON, ERXFCON_UCEN|ERXFCON_CRCEN|ERXFCON_BCEN);
+
+	// do bank 2 stuff
+	// enable MAC receive
+	spi_write(MACON1, MACON1_MARXEN|MACON1_TXPAUS|MACON1_RXPAUS);
+	// enable automatic padding to 60bytes and CRC operations
+	// spi_write_op(ENC28J60_BIT_FIELD_SET, MACON3, MACON3_PADCFG0|MACON3_TXCRCEN|MACON3_FRMLNEN);
+	spi_write_op(ENC28J60_BIT_FIELD_SET, MACON3, MACON3_PADCFG0 | MACON3_TXCRCEN | MACON3_FRMLNEN | MACON3_FULDPX);
+	// bring MAC out of reset
+
+	// set inter-frame gap (back-to-back)
+	// spi_write(MABBIPG, 0x12);
+	spi_write(MABBIPG, 0x15);
+
+	spi_write(MACON4, MACON4_DEFER);
+	spi_write(MACLCON2, 63);
+
+	// set inter-frame gap (non-back-to-back)
+	spi_write(MAIPGL, 0x12);
+	spi_write(MAIPGH, 0x0C);
+
+	// Set the maximum packet size which the controller will accept
+	// Do not send packets longer than MAX_FRAMELEN:
+	spi_write(MAMXFLL, MAX_FRAMELEN&0xFF);
+	spi_write(MAMXFLH, MAX_FRAMELEN>>8);
+
+    // do bank 3 stuff
+    // write MAC address
+    // NOTE: MAC address in ENC28J60 is byte-backward
+    spi_write(MAADR0, enc28j60_dev->dev_addr[5]);
+    spi_write(MAADR1, enc28j60_dev->dev_addr[4]);
+    spi_write(MAADR2, enc28j60_dev->dev_addr[3]);
+    spi_write(MAADR3, enc28j60_dev->dev_addr[2]);
+    spi_write(MAADR4, enc28j60_dev->dev_addr[1]);
+    spi_write(MAADR5, enc28j60_dev->dev_addr[0]);
+
+	/* output off */
+	spi_write(ECOCON, 0x00);
+
+	// enc28j60_phy_write(PHCON1, 0x00);
+	enc28j60_phy_write(PHCON1, PHCON1_PDPXMD); // full duplex
+    // no loopback of transmitted frames
+	enc28j60_phy_write(PHCON2, PHCON2_HDLDIS);
+
+	enc28j60_set_bank(ECON2);
+	spi_write_op(ENC28J60_BIT_FIELD_SET, ECON2, ECON2_AUTOINC);
+
+	// switch to bank 0
+	enc28j60_set_bank(ECON1);
+	// enable interrutps
+	spi_write_op(ENC28J60_BIT_FIELD_SET, EIE, EIE_INTIE|EIE_PKTIE|EIR_TXIF);
+	// enable packet reception
+	spi_write_op(ENC28J60_BIT_FIELD_SET, ECON1, ECON1_RXEN);
+
+	/* clock out */
+	// enc28j60_clkout(2);
+
+	enc28j60_phy_write(PHLCON, 0xD76);	//0x476
+	delay_ms(20);
+
+    rt_kprintf("enc28j60 init ok!\n");
+
+    return RT_EOK;
+}
+
+/* control the interface */
+rt_err_t enc28j60_control(rt_device_t dev, rt_uint8_t cmd, void *args)
+{
+	switch(cmd)
+	{
+	case NIOCTL_GADDR:
+		/* get mac address */
+		if(args) rt_memcpy(args, enc28j60_dev_entry.dev_addr, 6);
+		else return -RT_ERROR;
+		break;
+
+	default :
+		break;
+	}
+
+	return RT_EOK;
+}
+
+/* Open the ethernet interface */
+rt_err_t enc28j60_open(rt_device_t dev, rt_uint16_t oflag)
+{
+	return RT_EOK;
+}
+
+/* Close the interface */
+rt_err_t enc28j60_close(rt_device_t dev)
+{
+	return RT_EOK;
+}
+
+/* Read */
+rt_size_t enc28j60_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
+{
+	rt_set_errno(-RT_ENOSYS);
+	return 0;
+}
+
+/* Write */
+rt_size_t enc28j60_write(rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
+{
+	rt_set_errno(-RT_ENOSYS);
+	return 0;
+}
+
+/* ethernet device interface */
+/*
+ * Transmit packet.
+ */
+rt_err_t enc28j60_tx( rt_device_t dev, struct pbuf* p)
+{
+	struct pbuf* q;
+	rt_uint32_t len;
+	rt_uint8_t* ptr;
+
+	// rt_kprintf("tx pbuf: 0x%08x\n", p);
+
+	/* lock tx operation */
+	rt_sem_take(&tx_sem, RT_WAITING_FOREVER);
+
+	// Set the write pointer to start of transmit buffer area
+	spi_write(EWRPTL, TXSTART_INIT&0xFF);
+	spi_write(EWRPTH, TXSTART_INIT>>8);
+	// Set the TXND pointer to correspond to the packet size given
+	spi_write(ETXNDL, (TXSTART_INIT+ p->tot_len + 1)&0xFF);
+	spi_write(ETXNDH, (TXSTART_INIT+ p->tot_len + 1)>>8);
+
+	// write per-packet control byte (0x00 means use macon3 settings)
+	spi_write_op(ENC28J60_WRITE_BUF_MEM, 0, 0x00);
+
+	for (q = p; q != NULL; q = q->next)
+	{
+        CSACTIVE;
+
+		SPI_I2S_SendData(SPI2, ENC28J60_WRITE_BUF_MEM);
+		while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET);
+
+		len = q->len;
+		ptr = q->payload;
+        while(len)
+        {
+			SPI_I2S_SendData(SPI2,*ptr) ;
+			while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET);;
+				ptr++;
+
+			len--;
+        }
+
+        CSPASSIVE;
+	}
+
+	// send the contents of the transmit buffer onto the network
+	spi_write_op(ENC28J60_BIT_FIELD_SET, ECON1, ECON1_TXRTS);
+	// Reset the transmit logic problem. See Rev. B4 Silicon Errata point 12.
+	if( (spi_read(EIR) & EIR_TXERIF) )
+	{
+		spi_write_op(ENC28J60_BIT_FIELD_CLR, ECON1, ECON1_TXRTS);
+	}
+
+	// rt_kprintf("tx ok\n");
+
+    return RT_EOK;
+}
+
+struct pbuf *enc28j60_rx(rt_device_t dev)
+{
+	struct pbuf* p;
+	rt_uint32_t len;
+	rt_uint16_t rxstat;
+	rt_uint32_t pk_counter;
+
+    p = RT_NULL;
+
+    pk_counter = spi_read(EPKTCNT);
+    if (pk_counter)
+    {
+        // Set the read pointer to the start of the received packet
+        spi_write(ERDPTL, (NextPacketPtr));
+        spi_write(ERDPTH, (NextPacketPtr)>>8);
+
+        // read the next packet pointer
+        NextPacketPtr  = spi_read_op(ENC28J60_READ_BUF_MEM, 0);
+        NextPacketPtr |= spi_read_op(ENC28J60_READ_BUF_MEM, 0)<<8;
+
+        // read the packet length (see datasheet page 43)
+        len  = spi_read_op(ENC28J60_READ_BUF_MEM, 0);	    //0x54
+        len |= spi_read_op(ENC28J60_READ_BUF_MEM, 0) <<8;	//5554
+
+        len-=4; //remove the CRC count
+
+        // read the receive status (see datasheet page 43)
+        rxstat  = spi_read_op(ENC28J60_READ_BUF_MEM, 0);
+        rxstat |= ((rt_uint16_t)spi_read_op(ENC28J60_READ_BUF_MEM, 0))<<8;
+
+        // check CRC and symbol errors (see datasheet page 44, table 7-3):
+        // The ERXFCON.CRCEN is set by default. Normally we should not
+        // need to check this.
+        if ((rxstat & 0x80)==0)
+        {
+            // invalid
+            len=0;
+        }
+        else
+        {
+            /* allocation pbuf */
+            p = pbuf_alloc(PBUF_LINK, len, PBUF_RAM);
+            if (p != RT_NULL)
+            {
+                rt_uint8_t* data;
+                struct pbuf* q;
+
+                for (q = p; q != RT_NULL; q= q->next)
+                {
+                    data = q->payload;
+                    len = q->len;
+
+                    CSACTIVE;
+
+                    SPI_I2S_SendData(SPI2,ENC28J60_READ_BUF_MEM);
+                    while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET);
+
+                    SPI_I2S_ReceiveData(SPI2);
+
+                    while(len)
+                    {
+                        len--;
+                        SPI_I2S_SendData(SPI2,0x00)	;
+                        while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET);
+
+                        *data= SPI_I2S_ReceiveData(SPI2);
+                        data++;
+                    }
+
+                    CSPASSIVE;
+                }
+            }
+        }
+
+        // Move the RX read pointer to the start of the next received packet
+        // This frees the memory we just read out
+        spi_write(ERXRDPTL, (NextPacketPtr));
+        spi_write(ERXRDPTH, (NextPacketPtr)>>8);
+
+        // decrement the packet counter indicate we are done with this packet
+        spi_write_op(ENC28J60_BIT_FIELD_SET, ECON2, ECON2_PKTDEC);
+    }
+	else
+	{
+		rt_uint32_t level;
+		/* lock enc28j60 */
+		level = rt_hw_interrupt_disable();
+		
+		// switch to bank 0
+		enc28j60_set_bank(EIE);
+		// enable interrutps
+		spi_write_op(ENC28J60_BIT_FIELD_SET, EIE, EIE_PKTIE);
+		// switch to bank 0
+		enc28j60_set_bank(ECON1);
+		// enable packet reception
+		spi_write_op(ENC28J60_BIT_FIELD_SET, ECON1, ECON1_RXEN);
+		
+		/* enable interrupt */
+		rt_hw_interrupt_enable(level);
+	}
+
+    return p;
+}
+
+static void RCC_Configuration(void)
+{
+    /* enable spi2 clock */
+    RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI2, ENABLE);
+
+    /* enable gpiob port clock */
+    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB | RCC_APB2Periph_AFIO, ENABLE);
+}
+
+static void NVIC_Configuration(void)
+{
+    NVIC_InitTypeDef NVIC_InitStructure;
+
+    /* Configure one bit for preemption priority */
+    NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);
+
+    /* Enable the EXTI0 Interrupt */
+    NVIC_InitStructure.NVIC_IRQChannel = EXTI0_IRQChannel;
+    NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
+    NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
+    NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+    NVIC_Init(&NVIC_InitStructure);
+}
+
+static void GPIO_Configuration()
+{
+	GPIO_InitTypeDef GPIO_InitStructure;
+    EXTI_InitTypeDef EXTI_InitStructure;
+
+	/* configure PB0 as external interrupt */
+	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+	GPIO_Init(GPIOB, &GPIO_InitStructure);
+
+    /* Configure SPI2 pins:  SCK, MISO and MOSI ----------------------------*/
+    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_13 | GPIO_Pin_14 | GPIO_Pin_15;
+    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_10MHz;
+    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+    GPIO_Init(GPIOB, &GPIO_InitStructure);
+
+	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12;
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
+	GPIO_Init(GPIOB, &GPIO_InitStructure);
+
+    /* Connect ENC28J60 EXTI Line to GPIOB Pin 0 */
+    GPIO_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource0);
+
+    /* Configure ENC28J60 EXTI Line to generate an interrupt on falling edge */
+    EXTI_InitStructure.EXTI_Line = EXTI_Line0;
+    EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
+    EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling;
+    EXTI_InitStructure.EXTI_LineCmd = ENABLE;
+    EXTI_Init(&EXTI_InitStructure);
+
+	/* Clear the Key Button EXTI line pending bit */
+	EXTI_ClearITPendingBit(EXTI_Line0);
+}
+
+static void SetupSPI (void)
+{
+    SPI_InitTypeDef SPI_InitStructure;
+    SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
+    SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
+    SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
+    SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low;
+    SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge;
+    SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
+    SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_4;
+    SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
+    SPI_InitStructure.SPI_CRCPolynomial = 7;
+    SPI_Init(SPI2, &SPI_InitStructure);
+    SPI_Cmd(SPI2, ENABLE);
+}
+
+static rt_timer_t enc28j60_timer;
+void rt_hw_enc28j60_timeout(void* parameter)
+{
+	// switch to bank 0
+	enc28j60_set_bank(EIE);
+	// enable interrutps
+	spi_write_op(ENC28J60_BIT_FIELD_SET, EIE, EIE_PKTIE);
+	// switch to bank 0
+	enc28j60_set_bank(ECON1);
+	// enable packet reception
+	spi_write_op(ENC28J60_BIT_FIELD_SET, ECON1, ECON1_RXEN);
+
+	enc28j60_isr();
+}
+
+int rt_hw_enc28j60_init()
+{
+	rt_err_t result;
+
+	/* configuration PB5 as INT */
+	RCC_Configuration();
+	NVIC_Configuration();
+	GPIO_Configuration();
+	SetupSPI();
+
+	/* init rt-thread device interface */
+	enc28j60_dev_entry.parent.parent.init		= enc28j60_init;
+	enc28j60_dev_entry.parent.parent.open		= enc28j60_open;
+	enc28j60_dev_entry.parent.parent.close		= enc28j60_close;
+	enc28j60_dev_entry.parent.parent.read		= enc28j60_read;
+	enc28j60_dev_entry.parent.parent.write		= enc28j60_write;
+	enc28j60_dev_entry.parent.parent.control	= enc28j60_control;
+	enc28j60_dev_entry.parent.eth_rx			= enc28j60_rx;
+	enc28j60_dev_entry.parent.eth_tx			= enc28j60_tx;
+
+	/* Update MAC address */
+	enc28j60_dev_entry.dev_addr[0] = 0x1e;
+	enc28j60_dev_entry.dev_addr[1] = 0x30;
+	enc28j60_dev_entry.dev_addr[2] = 0x6c;
+	enc28j60_dev_entry.dev_addr[3] = 0xa2;
+	enc28j60_dev_entry.dev_addr[4] = 0x45;
+	enc28j60_dev_entry.dev_addr[5] = 0x5e;
+
+	rt_sem_init(&tx_sem, "emac", 1, RT_IPC_FLAG_FIFO);
+
+	result = eth_device_init(&(enc28j60_dev->parent), "E0");
+
+	/* workaround for enc28j60 interrupt */
+	enc28j60_timer = rt_timer_create("etimer", 
+		rt_hw_enc28j60_timeout, RT_NULL, 
+		50, RT_TIMER_FLAG_PERIODIC);
+	if (enc28j60_timer != RT_NULL)
+		rt_timer_start(enc28j60_timer);
+
+	return RT_EOK;
+}

bsp/stm32sky001/enc28j60.h

@@ -0,0 +1,256 @@
+#ifndef __ENC28J60_H__
+#define __ENC28J60_H__
+
+#include <rtthread.h>
+
+// ENC28J60 Control Registers
+// Control register definitions are a combination of address,
+// bank number, and Ethernet/MAC/PHY indicator bits.
+// - Register address        (bits 0-4)
+// - Bank number        (bits 5-6)
+// - MAC/PHY indicator        (bit 7)
+#define ADDR_MASK        0x1F
+#define BANK_MASK        0x60
+#define SPRD_MASK        0x80
+// All-bank registers
+#define EIE              0x1B
+#define EIR              0x1C
+#define ESTAT            0x1D
+#define ECON2            0x1E
+#define ECON1            0x1F
+// Bank 0 registers
+#define ERDPTL           (0x00|0x00)
+#define ERDPTH           (0x01|0x00)
+#define EWRPTL           (0x02|0x00)
+#define EWRPTH           (0x03|0x00)
+#define ETXSTL           (0x04|0x00)
+#define ETXSTH           (0x05|0x00)
+#define ETXNDL           (0x06|0x00)
+#define ETXNDH           (0x07|0x00)
+#define ERXSTL           (0x08|0x00)
+#define ERXSTH           (0x09|0x00)
+#define ERXNDL           (0x0A|0x00)
+#define ERXNDH           (0x0B|0x00)
+#define ERXRDPTL         (0x0C|0x00)
+#define ERXRDPTH         (0x0D|0x00)
+#define ERXWRPTL         (0x0E|0x00)
+#define ERXWRPTH         (0x0F|0x00)
+#define EDMASTL          (0x10|0x00)
+#define EDMASTH          (0x11|0x00)
+#define EDMANDL          (0x12|0x00)
+#define EDMANDH          (0x13|0x00)
+#define EDMADSTL         (0x14|0x00)
+#define EDMADSTH         (0x15|0x00)
+#define EDMACSL          (0x16|0x00)
+#define EDMACSH          (0x17|0x00)
+// Bank 1 registers
+#define EHT0             (0x00|0x20)
+#define EHT1             (0x01|0x20)
+#define EHT2             (0x02|0x20)
+#define EHT3             (0x03|0x20)
+#define EHT4             (0x04|0x20)
+#define EHT5             (0x05|0x20)
+#define EHT6             (0x06|0x20)
+#define EHT7             (0x07|0x20)
+#define EPMM0            (0x08|0x20)
+#define EPMM1            (0x09|0x20)
+#define EPMM2            (0x0A|0x20)
+#define EPMM3            (0x0B|0x20)
+#define EPMM4            (0x0C|0x20)
+#define EPMM5            (0x0D|0x20)
+#define EPMM6            (0x0E|0x20)
+#define EPMM7            (0x0F|0x20)
+#define EPMCSL           (0x10|0x20)
+#define EPMCSH           (0x11|0x20)
+#define EPMOL            (0x14|0x20)
+#define EPMOH            (0x15|0x20)
+#define EWOLIE           (0x16|0x20)
+#define EWOLIR           (0x17|0x20)
+#define ERXFCON          (0x18|0x20)
+#define EPKTCNT          (0x19|0x20)
+// Bank 2 registers
+#define MACON1           (0x00|0x40|0x80)
+#define MACON2           (0x01|0x40|0x80)
+#define MACON3           (0x02|0x40|0x80)
+#define MACON4           (0x03|0x40|0x80)
+#define MABBIPG          (0x04|0x40|0x80)
+#define MAIPGL           (0x06|0x40|0x80)
+#define MAIPGH           (0x07|0x40|0x80)
+#define MACLCON1         (0x08|0x40|0x80)
+#define MACLCON2         (0x09|0x40|0x80)
+#define MAMXFLL          (0x0A|0x40|0x80)
+#define MAMXFLH          (0x0B|0x40|0x80)
+#define MAPHSUP          (0x0D|0x40|0x80)
+#define MICON            (0x11|0x40|0x80)
+#define MICMD            (0x12|0x40|0x80)
+#define MIREGADR         (0x14|0x40|0x80)
+#define MIWRL            (0x16|0x40|0x80)
+#define MIWRH            (0x17|0x40|0x80)
+#define MIRDL            (0x18|0x40|0x80)
+#define MIRDH            (0x19|0x40|0x80)
+// Bank 3 registers
+#define MAADR1           (0x00|0x60|0x80)
+#define MAADR0           (0x01|0x60|0x80)
+#define MAADR3           (0x02|0x60|0x80)
+#define MAADR2           (0x03|0x60|0x80)
+#define MAADR5           (0x04|0x60|0x80)
+#define MAADR4           (0x05|0x60|0x80)
+#define EBSTSD           (0x06|0x60)
+#define EBSTCON          (0x07|0x60)
+#define EBSTCSL          (0x08|0x60)
+#define EBSTCSH          (0x09|0x60)
+#define MISTAT           (0x0A|0x60|0x80)
+#define EREVID           (0x12|0x60)
+#define ECOCON           (0x15|0x60)
+#define EFLOCON          (0x17|0x60)
+#define EPAUSL           (0x18|0x60)
+#define EPAUSH           (0x19|0x60)
+// PHY registers
+#define PHCON1           0x00
+#define PHSTAT1          0x01
+#define PHHID1           0x02
+#define PHHID2           0x03
+#define PHCON2           0x10
+#define PHSTAT2          0x11
+#define PHIE             0x12
+#define PHIR             0x13
+#define PHLCON           0x14
+
+// ENC28J60 ERXFCON Register Bit Definitions
+#define ERXFCON_UCEN     0x80
+#define ERXFCON_ANDOR    0x40
+#define ERXFCON_CRCEN    0x20
+#define ERXFCON_PMEN     0x10
+#define ERXFCON_MPEN     0x08
+#define ERXFCON_HTEN     0x04
+#define ERXFCON_MCEN     0x02
+#define ERXFCON_BCEN     0x01
+// ENC28J60 EIE Register Bit Definitions
+#define EIE_INTIE        0x80
+#define EIE_PKTIE        0x40
+#define EIE_DMAIE        0x20
+#define EIE_LINKIE       0x10
+#define EIE_TXIE         0x08
+#define EIE_WOLIE        0x04
+#define EIE_TXERIE       0x02
+#define EIE_RXERIE       0x01
+// ENC28J60 EIR Register Bit Definitions
+#define EIR_PKTIF        0x40
+#define EIR_DMAIF        0x20
+#define EIR_LINKIF       0x10
+#define EIR_TXIF         0x08
+#define EIR_WOLIF        0x04
+#define EIR_TXERIF       0x02
+#define EIR_RXERIF       0x01
+// ENC28J60 ESTAT Register Bit Definitions
+#define ESTAT_INT        0x80
+#define ESTAT_LATECOL    0x10
+#define ESTAT_RXBUSY     0x04
+#define ESTAT_TXABRT     0x02
+#define ESTAT_CLKRDY     0x01
+// ENC28J60 ECON2 Register Bit Definitions
+#define ECON2_AUTOINC    0x80
+#define ECON2_PKTDEC     0x40
+#define ECON2_PWRSV      0x20
+#define ECON2_VRPS       0x08
+// ENC28J60 ECON1 Register Bit Definitions
+#define ECON1_TXRST      0x80
+#define ECON1_RXRST      0x40
+#define ECON1_DMAST      0x20
+#define ECON1_CSUMEN     0x10
+#define ECON1_TXRTS      0x08
+#define ECON1_RXEN       0x04
+#define ECON1_BSEL1      0x02
+#define ECON1_BSEL0      0x01
+// ENC28J60 MACON1 Register Bit Definitions
+#define MACON1_LOOPBK    0x10
+#define MACON1_TXPAUS    0x08
+#define MACON1_RXPAUS    0x04
+#define MACON1_PASSALL   0x02
+#define MACON1_MARXEN    0x01
+// ENC28J60 MACON2 Register Bit Definitions
+#define MACON2_MARST     0x80
+#define MACON2_RNDRST    0x40
+#define MACON2_MARXRST   0x08
+#define MACON2_RFUNRST   0x04
+#define MACON2_MATXRST   0x02
+#define MACON2_TFUNRST   0x01
+// ENC28J60 MACON3 Register Bit Definitions
+#define MACON3_PADCFG2   0x80
+#define MACON3_PADCFG1   0x40
+#define MACON3_PADCFG0   0x20
+#define MACON3_TXCRCEN   0x10
+#define MACON3_PHDRLEN   0x08
+#define MACON3_HFRMLEN   0x04
+#define MACON3_FRMLNEN   0x02
+#define MACON3_FULDPX    0x01
+// ENC28J60 MACON4 Register Bit Definitions
+#define	MACON4_DEFER	(1<<6)
+#define	MACON4_BPEN		(1<<5)
+#define	MACON4_NOBKOFF	(1<<4)
+// ENC28J60 MICMD Register Bit Definitions
+#define MICMD_MIISCAN    0x02
+#define MICMD_MIIRD      0x01
+// ENC28J60 MISTAT Register Bit Definitions
+#define MISTAT_NVALID    0x04
+#define MISTAT_SCAN      0x02
+#define MISTAT_BUSY      0x01
+// ENC28J60 PHY PHCON1 Register Bit Definitions
+#define PHCON1_PRST      0x8000
+#define PHCON1_PLOOPBK   0x4000
+#define PHCON1_PPWRSV    0x0800
+#define PHCON1_PDPXMD    0x0100
+// ENC28J60 PHY PHSTAT1 Register Bit Definitions
+#define PHSTAT1_PFDPX    0x1000
+#define PHSTAT1_PHDPX    0x0800
+#define PHSTAT1_LLSTAT   0x0004
+#define PHSTAT1_JBSTAT   0x0002
+/* ENC28J60 PHY PHSTAT2 Register Bit Definitions */
+#define PHSTAT2_TXSTAT	(1 << 13)
+#define PHSTAT2_RXSTAT	(1 << 12)
+#define PHSTAT2_COLSTAT	(1 << 11)
+#define PHSTAT2_LSTAT	(1 << 10)
+#define PHSTAT2_DPXSTAT	(1 << 9)
+#define PHSTAT2_PLRITY	(1 << 5)
+// ENC28J60 PHY PHCON2 Register Bit Definitions
+#define PHCON2_FRCLINK   0x4000
+#define PHCON2_TXDIS     0x2000
+#define PHCON2_JABBER    0x0400
+#define PHCON2_HDLDIS    0x0100
+
+// ENC28J60 Packet Control Byte Bit Definitions
+#define PKTCTRL_PHUGEEN  0x08
+#define PKTCTRL_PPADEN   0x04
+#define PKTCTRL_PCRCEN   0x02
+#define PKTCTRL_POVERRIDE 0x01
+
+// SPI operation codes
+#define ENC28J60_READ_CTRL_REG       0x00
+#define ENC28J60_READ_BUF_MEM        0x3A
+#define ENC28J60_WRITE_CTRL_REG      0x40
+#define ENC28J60_WRITE_BUF_MEM       0x7A
+#define ENC28J60_BIT_FIELD_SET       0x80
+#define ENC28J60_BIT_FIELD_CLR       0xA0
+#define ENC28J60_SOFT_RESET          0xFF
+
+// The RXSTART_INIT should be zero. See Rev. B4 Silicon Errata
+// buffer boundaries applied to internal 8K ram
+// the entire available packet buffer space is allocated
+//
+
+// start with recbuf at 0/
+#define RXSTART_INIT	0x0
+// receive buffer end
+#define RXSTOP_INIT		(0x1FFF-0x0600) - 1
+// start TX buffer at 0x1FFF-0x0600, pace for one full ethernet frame (~1500 bytes)
+
+#define TXSTART_INIT	(0x1FFF-0x0600)
+// stp TX buffer at end of mem
+#define TXSTOP_INIT		0x1FFF
+
+// max frame length which the conroller will accept:
+#define MAX_FRAMELEN	1518
+
+int rt_hw_enc28j60_init(void);
+
+#endif

bsp/stm32sky001/project.Uv2

@@ -0,0 +1,170 @@
+### uVision2 Project, (C) Keil Software
+### Do not modify !
+
+Target (RT-Thread/STM32Sky), 0x0004 // Tools: 'ARM-ADS'
+
+Group (Startup)
+Group (Library)
+Group (Kernel)
+Group (STM32)
+Group (finsh)
+
+File 1,1,<.\application.c><application.c>
+File 1,1,<.\board.c><board.c>
+File 1,1,<.\startup.c><startup.c>
+File 1,2,<.\cortexm3_macro.s><cortexm3_macro.s>
+File 1,1,<.\stm32f10x_it.c><stm32f10x_it.c>
+File 1,5,<.\stm32f10x_conf.h><stm32f10x_conf.h>
+File 1,5,<.\rtconfig.h><rtconfig.h>
+File 1,1,<.\usart.c><usart.c>
+File 1,1,<.\rtc.c><rtc.c>
+File 2,1,<.\library\src\stm32f10x_adc.c><stm32f10x_adc.c>
+File 2,1,<.\library\src\stm32f10x_bkp.c><stm32f10x_bkp.c>
+File 2,1,<.\library\src\stm32f10x_can.c><stm32f10x_can.c>
+File 2,1,<.\library\src\stm32f10x_crc.c><stm32f10x_crc.c>
+File 2,1,<.\library\src\stm32f10x_dac.c><stm32f10x_dac.c>
+File 2,1,<.\library\src\stm32f10x_dbgmcu.c><stm32f10x_dbgmcu.c>
+File 2,1,<.\library\src\stm32f10x_dma.c><stm32f10x_dma.c>
+File 2,1,<.\library\src\stm32f10x_exti.c><stm32f10x_exti.c>
+File 2,1,<.\library\src\stm32f10x_flash.c><stm32f10x_flash.c>
+File 2,1,<.\library\src\stm32f10x_fsmc.c><stm32f10x_fsmc.c>
+File 2,1,<.\library\src\stm32f10x_gpio.c><stm32f10x_gpio.c>
+File 2,1,<.\library\src\stm32f10x_i2c.c><stm32f10x_i2c.c>
+File 2,1,<.\library\src\stm32f10x_iwdg.c><stm32f10x_iwdg.c>
+File 2,1,<.\library\src\stm32f10x_lib.c><stm32f10x_lib.c>
+File 2,1,<.\library\src\stm32f10x_nvic.c><stm32f10x_nvic.c>
+File 2,1,<.\library\src\stm32f10x_pwr.c><stm32f10x_pwr.c>
+File 2,1,<.\library\src\stm32f10x_rcc.c><stm32f10x_rcc.c>
+File 2,1,<.\library\src\stm32f10x_rtc.c><stm32f10x_rtc.c>
+File 2,1,<.\library\src\stm32f10x_sdio.c><stm32f10x_sdio.c>
+File 2,1,<.\library\src\stm32f10x_spi.c><stm32f10x_spi.c>
+File 2,1,<.\library\src\stm32f10x_systick.c><stm32f10x_systick.c>
+File 2,1,<.\library\src\stm32f10x_tim.c><stm32f10x_tim.c>
+File 2,1,<.\library\src\stm32f10x_usart.c><stm32f10x_usart.c>
+File 2,1,<.\library\src\stm32f10x_wwdg.c><stm32f10x_wwdg.c>
+File 3,1,<..\..\src\clock.c><clock.c>
+File 3,1,<..\..\src\idle.c><idle.c>
+File 3,1,<..\..\src\ipc.c><ipc.c>
+File 3,1,<..\..\src\mem.c><mem.c>
+File 3,1,<..\..\src\mempool.c><mempool.c>
+File 3,1,<..\..\src\object.c><object.c>
+File 3,1,<..\..\src\scheduler.c><scheduler.c>
+File 3,1,<..\..\src\thread.c><thread.c>
+File 3,1,<..\..\src\timer.c><timer.c>
+File 3,1,<..\..\src\irq.c><irq.c>
+File 3,1,<..\..\src\kservice.c><kservice.c>
+File 3,1,<..\..\src\device.c><device.c>
+File 3,1,<..\..\src\slab.c><slab.c>
+File 4,1,<..\..\libcpu\arm\stm32\stack.c><stack.c>
+File 4,1,<..\..\libcpu\arm\stm32\interrupt.c><interrupt.c>
+File 4,1,<..\..\libcpu\arm\stm32\cpu.c><cpu.c>
+File 4,1,<..\..\libcpu\arm\stm32\serial.c><serial.c>
+File 4,2,<..\..\libcpu\arm\stm32\context_rvds.S><context_rvds.S>
+File 4,2,<..\..\libcpu\arm\stm32\start_rvds.s><start_rvds.s>
+File 4,1,<..\..\libcpu\arm\stm32\fault.c><fault.c>
+File 4,2,<..\..\libcpu\arm\stm32\fault_rvds.S><fault_rvds.S>
+File 5,1,<..\..\finsh\finsh_compiler.c><finsh_compiler.c>
+File 5,1,<..\..\finsh\finsh_error.c><finsh_error.c>
+File 5,1,<..\..\finsh\finsh_heap.c><finsh_heap.c>
+File 5,1,<..\..\finsh\finsh_init.c><finsh_init.c>
+File 5,1,<..\..\finsh\finsh_node.c><finsh_node.c>
+File 5,1,<..\..\finsh\finsh_ops.c><finsh_ops.c>
+File 5,1,<..\..\finsh\finsh_parser.c><finsh_parser.c>
+File 5,1,<..\..\finsh\finsh_token.c><finsh_token.c>
+File 5,1,<..\..\finsh\finsh_var.c><finsh_var.c>
+File 5,1,<..\..\finsh\finsh_vm.c><finsh_vm.c>
+File 5,1,<..\..\finsh\shell.c><shell.c>
+File 5,1,<..\..\finsh\symbol.c><symbol.c>
+File 5,1,<..\..\finsh\cmd.c><cmd.c>
+
+
+Options 1,0,0  // Target 'RT-Thread/STM32Sky'
+ Device (STM32F103ZE)
+ Vendor (STMicroelectronics)
+ Cpu (IRAM(0x20000000-0x2000FFFF) IROM(0x8000000-0x807FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3"))
+ FlashUt ()
+ StupF ("STARTUP\ST\STM32F10x.s" ("STM32 Startup Code"))
+ FlashDR (UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_512 -FS08000000 -FL080000))
+ DevID (4216)
+ Rgf (stm32f10x_lib.h)
+ Mem ()
+ C ()
+ A ()
+ RL ()
+ OH ()
+ DBC_IFX ()
+ DBC_CMS ()
+ DBC_AMS ()
+ DBC_LMS ()
+ UseEnv=0
+ EnvBin ()
+ EnvInc ()
+ EnvLib ()
+ EnvReg (ÿST\STM32F10x\)
+ OrgReg (ÿST\STM32F10x\)
+ TgStat=16
+ OutDir (.\obj\)
+ OutName (rtthread-stm32)
+ GenApp=1
+ GenLib=0
+ GenHex=1
+ Debug=1
+ Browse=1
+ LstDir (.\obj\)
+ HexSel=1
+ MG32K=0
+ TGMORE=0
+ RunUsr 0 0 <>
+ RunUsr 1 0 <>
+ BrunUsr 0 0 <>
+ BrunUsr 1 0 <>
+ CrunUsr 0 0 <>
+ CrunUsr 1 0 <>
+ SVCSID <>
+ GLFLAGS=1790
+ ADSFLGA { 243,31,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ ACPUTYP ("Cortex-M3")
+ RVDEV ()
+ ADSTFLGA { 0,12,0,2,99,0,1,66,0,0,0,0,0,0,0,0,0,0,0,0 }
+ OCMADSOCM { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ OCMADSIRAM { 0,0,0,0,32,0,0,1,0 }
+ OCMADSIROM { 1,0,0,0,8,0,0,8,0 }
+ OCMADSXRAM { 0,0,0,0,0,0,0,0,0 }
+ OCR_RVCT { 1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,8,0,0,8,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,32,0,0,1,0,0,0,0,0,0,0,0,0,0 }
+ RV_STAVEC ()
+ ADSCCFLG { 5,0,0,4,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ ADSCMISC ()
+ ADSCDEFN ()
+ ADSCUDEF ()
+ ADSCINCD (.;.\library\inc;.\library\src;..\..\include;..\..\libcpu\arm\stm32;..\..\finsh)
+ ADSASFLG { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ ADSAMISC ()
+ ADSADEFN ()
+ ADSAUDEF ()
+ ADSAINCD ()
+ PropFld { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ IncBld=1
+ AlwaysBuild=0
+ GenAsm=0
+ AsmAsm=0
+ PublicsOnly=0
+ StopCode=3
+ CustArgs ()
+ LibMods ()
+ ADSLDFG { 17,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+ ADSLDTA (0x08000000)
+ ADSLDDA (0x20000000)
+ ADSLDSC ()
+ ADSLDIB ()
+ ADSLDIC ()
+ ADSLDMC (--keep __fsym_* --keep __vsym_*)
+ ADSLDIF ()
+ ADSLDDW ()
+  OPTDL (SARMCM3.DLL)()(DARMSTM.DLL)(-pSTM32F103ZE)(SARMCM3.DLL)()(TARMSTM.DLL)(-pSTM32F103ZE)
+  OPTDBG 48117,7,()()()()()()()()()() (Segger\JL2CM3.dll)()()()
+ FLASH1 { 9,0,0,0,1,0,0,0,5,16,0,0,0,0,0,0,0,0,0,0 }
+ FLASH2 (Segger\JLTAgdi.dll)
+ FLASH3 ("" ())
+ FLASH4 ()
+EndOpt
+

bsp/stm32sky001/project.ewd

@@ -0,0 +1,1299 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>
+  <configuration>
+    <name>Debug</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>1</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>18</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\debugger\ST\iostm32f10xxe.ddf</state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>5.30.0.51236</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>JLINK_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state>5.30.0.51236</state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV2</name>
+          <state>,,,,(default),</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommunication</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>10</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>32</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>32</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDIUseETM</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration>
+  <configuration>
+    <name>Release</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>C-SPY</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>18</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCVariant</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>MemOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MemFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>RunToEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RunToName</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCDDFArgumentProducer</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadSuppressDownload</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDownloadVerifyAll</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCProductVersion</name>
+          <state>5.30.0.51236</state>
+        </option>
+        <option>
+          <name>OCDynDriverList</name>
+          <state>ARMSIM_ID</state>
+        </option>
+        <option>
+          <name>OCLastSavedByProductVersion</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OCDownloadAttachToProgram</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>UseFlashLoader</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CLowLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacFile2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CDevice</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>FlashLoadersV2</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ARMSIM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCSimDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OCSimEnablePSP</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspOverrideConfig</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCSimPspConfigFile</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ANGEL_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCAngelHeartbeat</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommunication</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CAngelCommBaud</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CAngelCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ANGELTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoAngelLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AngelLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>GDBSERVER_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>main</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARROM_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRomLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CRomCommunication</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRomCommBaud</name>
+          <version>0</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>JLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>10</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>JLinkSpeed</name>
+          <state>32</state>
+        </option>
+        <option>
+          <name>CCJLinkDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCJLinkHWResetDelay</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>JLinkInitialSpeed</name>
+          <state>32</state>
+        </option>
+        <option>
+          <name>CCDoJlinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCScanChainNonARMDevices</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkIRLength</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkCommRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkTCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>CCJLinkSpeedRadioV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCUSBDevice</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJLinkUpdateBreakpoints</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCJLinkAttachSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCJLinkResetList</name>
+          <version>0</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>CCJLinkInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>LMIFTDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>LmiftdiSpeed</name>
+          <state>500</state>
+        </option>
+        <option>
+          <name>CCLmiftdiDoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLmiftdiLogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>MACRAIGOR_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>3</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>jtag</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuSpeed</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>TCPIP</name>
+          <state>aaa.bbb.ccc.ddd</state>
+        </option>
+        <option>
+          <name>DoLogfile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>LogFile</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>DoEmuMultiTarget</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>EmuMultiTarget</name>
+          <state>0@ARM7TDMI</state>
+        </option>
+        <option>
+          <name>EmuHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CEmuCommBaud</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>CEmuCommPort</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>jtago</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>UnusedAddr</name>
+          <state>0x00800000</state>
+        </option>
+        <option>
+          <name>CCMacraigorHWResetDelay</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCJTagBreakpointRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagDoUpdateBreakpoints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCJTagUpdateBreakpoints</name>
+          <state>main</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceRadio</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMacraigorInterfaceCmdLine</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>RDI_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CRDIDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CRDILogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CRDILogFileEdit</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>CCRDIHWReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchReset</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchUndef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchSWI</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchData</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchPrefetch</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchIRQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDICatchFIQ</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCRDIUseETM</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>STLINK_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>THIRDPARTY_ID</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CThirdPartyDriverDll</name>
+          <state>###Uninitialized###</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CThirdPartyLogFileEditB</name>
+          <state>$PROJ_DIR$\cspycomm.log</state>
+        </option>
+        <option>
+          <name>OCDriverInfo</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <debuggerPlugins>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+        <loadFlag>0</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+      <plugin>
+        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
+        <loadFlag>1</loadFlag>
+      </plugin>
+    </debuggerPlugins>
+  </configuration>
+</project>
+
+

bsp/stm32sky001/project.ewp

@@ -0,0 +1,1805 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>
+  <configuration>
+    <name>Debug</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>1</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>17</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>ExePath</name>
+          <state>Debug\Exe</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>Debug\Obj</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>Debug\List</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>9</version>
+          <state>33</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>1</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>0</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>RTConfigPath</name>
+          <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>5.30.0.51236</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>5.30.0.51236</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>STM32F10xxE	ST STM32F10xxE</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>21</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>CCDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>0000000</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLangSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\.</state>
+          <state>$PROJ_DIR$\library\inc</state>
+          <state>$PROJ_DIR$\..\..\include</state>
+          <state>$PROJ_DIR$\..\..\libcpu\arm\stm32</state>
+          <state>$PROJ_DIR$\..\..\finsh</state>
+          <state>$PROJ_DIR$\..\..\filesystem\dfs</state>
+          <state>$PROJ_DIR$\..\..\filesystem\dfs\include</state>
+          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\include</state>
+          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\base\include</state>
+          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\include</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCStdIncludePath</name>
+          <state>$TOOLKIT_DIR$\INC\</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>7</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ADefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AStdIncludes</name>
+          <state>$TOOLKIT_DIR$\INC\</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>project.srec</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>7</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>project.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+          <state>$PROJ_DIR$\stm32f10x_flash.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>IlinkNXPLPCChecksum</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlgo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>
+  <configuration>
+    <name>Release</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>17</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>Release\Exe</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>Release\Obj</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>Release\List</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>9</version>
+          <state>33</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>1</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Full formatting.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>RTConfigPath</name>
+          <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>5.30.0.51236</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>5.30.0.51236</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>STM32F10xxB	ST STM32F10xxB</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>21</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCDefines</name>
+          <state>NDEBUG</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>1111111</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLangSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\.</state>
+          <state>$PROJ_DIR$\library\inc</state>
+          <state>$PROJ_DIR$\..\..\include</state>
+          <state>$PROJ_DIR$\..\..\libcpu\arm\stm32</state>
+          <state>$PROJ_DIR$\..\..\finsh</state>
+          <state>$PROJ_DIR$\..\..\filesystem\dfs</state>
+          <state>$PROJ_DIR$\..\..\filesystem\dfs\include</state>
+          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\include</state>
+          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\base\include</state>
+          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\include</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCStdIncludePath</name>
+          <state>$TOOLKIT_DIR$\INC\</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>7</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ADefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AStdIncludes</name>
+          <state>$TOOLKIT_DIR$\INC\</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>7</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>project.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+          <state>$TOOLKIT_DIR$\CONFIG\generic_cortex.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>IlinkNXPLPCChecksum</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlgo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>
+  <group>
+    <name>finsh</name>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\cmd.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\finsh_compiler.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\finsh_error.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\finsh_heap.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\finsh_init.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\finsh_node.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\finsh_ops.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\finsh_parser.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\finsh_token.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\finsh_var.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\finsh_vm.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\shell.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\symbol.c</name>
+    </file>
+  </group>
+  <group>
+    <name>Kernel</name>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\clock.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\device.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\idle.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\ipc.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\irq.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\kservice.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\mem.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\mempool.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\object.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\scheduler.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\slab.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\thread.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\src\timer.c</name>
+    </file>
+  </group>
+  <group>
+    <name>Library</name>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_adc.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_bkp.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_can.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_crc.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_dac.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_dbgmcu.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_dma.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_exti.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_flash.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_fsmc.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_gpio.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_i2c.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_iwdg.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_lib.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_nvic.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_pwr.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_rcc.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_rtc.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_sdio.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_spi.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_systick.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_tim.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_usart.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\library\src\stm32f10x_wwdg.c</name>
+    </file>
+  </group>
+  <group>
+    <name>Startup</name>
+    <file>
+      <name>$PROJ_DIR$\application.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\board.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\rtconfig.h</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\sdcard.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\startup.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\stm32f10x_it.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\usart.c</name>
+    </file>
+  </group>
+  <group>
+    <name>STM32</name>
+    <file>
+      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\context_iar.S</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\cpu.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\interrupt.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\serial.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\stack.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\start_iar.c</name>
+    </file>
+  </group>
+</project>
+
+

bsp/stm32sky001/project.eww

@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>
+  <project>
+    <path>$WS_DIR$\project.ewp</path>
+  </project>
+  <batchBuild/>
+</workspace>
+
+

bsp/stm32sky001/rtc.c

@@ -0,0 +1,217 @@
+#include <rtthread.h>
+#include "stm32f10x_lib.h"
+
+static struct rt_device rtc;
+static rt_err_t rt_rtc_open(rt_device_t dev, rt_uint16_t oflag)
+{
+	if (dev->rx_indicate != RT_NULL)
+	{
+		/* Open Interrupt */
+	}
+	
+	return RT_EOK;
+}
+
+static rt_size_t rt_rtc_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
+{
+	return 0;
+}
+
+static rt_err_t rt_rtc_control(rt_device_t dev, rt_uint8_t cmd, void *args)
+{
+	rt_time_t *time;
+	RT_ASSERT(dev != RT_NULL);
+
+	switch (cmd)
+	{
+	case RT_DEVICE_CTRL_RTC_GET_TIME:
+		time = (rt_time_t *)args;
+		/* read device */
+		*time = RTC_GetCounter();
+		break;
+	
+	case RT_DEVICE_CTRL_RTC_SET_TIME:
+		{
+			time = (rt_time_t *)args;
+			
+			/* Enable PWR and BKP clocks */
+			RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE);
+			
+			/* Allow access to BKP Domain */
+			PWR_BackupAccessCmd(ENABLE);
+
+			/* Wait until last write operation on RTC registers has finished */
+			RTC_WaitForLastTask();
+
+			/* Change the current time */
+			RTC_SetCounter(*time);
+			
+			/* Wait until last write operation on RTC registers has finished */
+			RTC_WaitForLastTask();
+
+			BKP_WriteBackupRegister(BKP_DR1, 0xA5A5); 
+		}
+		break;
+	}
+
+	return RT_EOK;
+}
+
+/*******************************************************************************
+* Function Name  : RTC_Configuration
+* Description    : Configures the RTC.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void RTC_Configuration(void)
+{
+  /* Enable PWR and BKP clocks */
+  RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE);
+
+  /* Allow access to BKP Domain */
+  PWR_BackupAccessCmd(ENABLE);
+
+  /* Reset Backup Domain */
+  BKP_DeInit();
+
+  /* Enable LSE */
+  RCC_LSEConfig(RCC_LSE_ON);
+  /* Wait till LSE is ready */
+  while (RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET)
+  {
+  }
+
+  /* Select LSE as RTC Clock Source */
+  RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);
+
+  /* Enable RTC Clock */
+  RCC_RTCCLKCmd(ENABLE);
+
+  /* Wait for RTC registers synchronization */
+  RTC_WaitForSynchro();
+
+  /* Wait until last write operation on RTC registers has finished */
+  RTC_WaitForLastTask();
+
+  /* Set RTC prescaler: set RTC period to 1sec */
+  RTC_SetPrescaler(32767); /* RTC period = RTCCLK/RTC_PR = (32.768 KHz)/(32767+1) */
+
+  /* Wait until last write operation on RTC registers has finished */
+  RTC_WaitForLastTask();
+}
+
+void rt_hw_rtc_init(void)
+{
+	rtc.type	= RT_Device_Class_RTC;
+
+	if (BKP_ReadBackupRegister(BKP_DR1) != 0xA5A5)
+	{
+		rt_kprintf("rtc is not configured\n");
+		rt_kprintf("please configure with set_date and set_time\n");
+		RTC_Configuration();
+	}
+	else
+	{
+	    /* Wait for RTC registers synchronization */
+	    RTC_WaitForSynchro();
+	}
+
+	/* register rtc device */
+	rtc.init 	= RT_NULL;
+	rtc.open 	= rt_rtc_open;
+	rtc.close	= RT_NULL;
+	rtc.read 	= rt_rtc_read;
+	rtc.write	= RT_NULL;
+	rtc.control = rt_rtc_control;
+	
+	/* no private */
+	rtc.private = RT_NULL;
+	
+	rt_device_register(&rtc, "rtc", RT_DEVICE_FLAG_RDWR);
+
+	return;
+}
+
+#ifdef RT_USING_FINSH
+#include <finsh.h>
+#include <time.h>
+time_t time(time_t* t)
+{
+	rt_device_t device;
+	time_t time;
+	
+	device = rt_device_find("rtc");
+	if (device != RT_NULL)
+	{
+		rt_device_control(device, RT_DEVICE_CTRL_RTC_GET_TIME, &time);
+		if (t != RT_NULL) *t = time;
+	}
+	
+	return time;
+}
+
+void set_date(rt_uint32_t year, rt_uint32_t month, rt_uint32_t day)
+{
+	time_t now;
+	struct tm* ti;
+	rt_device_t device;
+	
+	ti = RT_NULL;
+	/* get current time */
+	time(&now);
+	
+	ti = localtime(&now);
+	if (ti != RT_NULL)
+	{
+		ti->tm_year = year - 1900;
+		ti->tm_mon 	= month;
+		ti->tm_mday = day;
+	}
+	
+	now = mktime(ti);
+	
+	device = rt_device_find("rtc");
+	if (device != RT_NULL)
+	{
+		rt_rtc_control(device, RT_DEVICE_CTRL_RTC_SET_TIME, &now);
+	}
+}
+FINSH_FUNCTION_EXPORT(set_date, set date)
+
+void set_time(rt_uint32_t hour, rt_uint32_t minute, rt_uint32_t second)
+{
+	time_t now;
+	struct tm* ti;
+	rt_device_t device;
+
+	ti = RT_NULL;
+	/* get current time */
+	time(&now);
+	
+	ti = localtime(&now);
+	if (ti != RT_NULL)
+	{
+		ti->tm_hour = hour;
+		ti->tm_min 	= minute;
+		ti->tm_sec 	= second;
+	}
+	
+	now = mktime(ti);
+	device = rt_device_find("rtc");
+	if (device != RT_NULL)
+	{
+		rt_rtc_control(device, RT_DEVICE_CTRL_RTC_SET_TIME, &now);
+	}
+}
+FINSH_FUNCTION_EXPORT(set_time, set second)
+
+void list_date()
+{
+	time_t now;
+	
+	time(&now);
+	rt_kprintf("%s\n", ctime(&now));
+}
+FINSH_FUNCTION_EXPORT(list_date, set date)
+#endif

bsp/stm32sky001/rtc.h

@@ -0,0 +1,6 @@
+#ifndef __RTC_H__
+#define __RTC_H__
+
+void rt_hw_rtc_init(void);
+
+#endif

bsp/stm32sky001/rtconfig.h

@@ -0,0 +1,156 @@
+/* RT-Thread config file */
+#ifndef __RTTHREAD_CFG_H__
+#define __RTTHREAD_CFG_H__
+
+/* RT_NAME_MAX*/
+#define RT_NAME_MAX	8
+
+/* RT_ALIGN_SIZE*/
+#define RT_ALIGN_SIZE	4
+
+/* PRIORITY_MAX*/
+#define RT_THREAD_PRIORITY_MAX	256
+
+/* Tick per Second*/
+#define RT_TICK_PER_SECOND	100
+
+/* SECTION: RT_DEBUG */
+/* Thread Debug*/
+#define RT_DEBUG
+/* #define RT_THREAD_DEBUG */
+#define RT_USING_OVERFLOW_CHECK
+
+/* Using Hook*/
+#define RT_USING_HOOK
+
+/* SECTION: IPC */
+/* Using Semaphore*/
+#define RT_USING_SEMAPHORE
+
+/* Using Mutex*/
+#define RT_USING_MUTEX
+
+/* Using Event*/
+#define RT_USING_EVENT
+
+/* Using Faset Event*/
+/* #define RT_USING_FASTEVENT */
+
+/* Using MailBox*/
+#define RT_USING_MAILBOX
+
+/* Using Message Queue*/
+#define RT_USING_MESSAGEQUEUE
+
+/* SECTION: Memory Management */
+/* Using Memory Pool Management*/
+#define RT_USING_MEMPOOL
+
+/* Using Dynamic Heap Management*/
+#define RT_USING_HEAP
+
+/* Using Small MM*/
+#define RT_USING_SMALL_MEM
+
+/* Using SLAB Allocator*/
+/* #define RT_USING_SLAB */
+
+/* SECTION: Device System */
+/* Using Device System*/
+#define RT_USING_DEVICE
+#define RT_USING_UART1
+// #define RT_USING_UART2
+// #define RT_USING_UART3
+
+/* SECTION: Console options */
+/* the buffer size of console*/
+#define RT_CONSOLEBUF_SIZE	128
+
+/* SECTION: FinSH shell options */
+/* Using FinSH as Shell*/
+#define RT_USING_FINSH
+/* Using symbol table */
+#define FINSH_USING_SYMTAB
+#define FINSH_USING_DESCRIPTION
+
+/* SECTION: a mini libc */
+/* Using mini libc library*/
+/* #define RT_USING_MINILIBC */
+
+/* SECTION: C++ support */
+/* Using C++ support*/
+/* #define RT_USING_CPLUSPLUS */
+
+/* #define RT_USING_RTGUI */
+
+/* #define RT_USING_DFS */
+/* SECTION: DFS options */
+/* the max number of mounted filesystem */
+#define DFS_FILESYSTEMS_MAX			2
+/* the max number of opened files 		*/
+#define DFS_FD_MAX					8
+/* the max number of cached sector 		*/
+#define DFS_CACHE_MAX_NUM   		8
+
+/* SECTION: lwip, a lighwight TCP/IP protocol stack */
+/* Using lighweight TCP/IP protocol stack*/
+/* #define RT_USING_LWIP */
+
+/* Trace LwIP protocol*/
+/* #define RT_LWIP_DEBUG */
+
+/* Enable ICMP protocol*/
+#define RT_LWIP_ICMP
+
+/* Enable IGMP protocol*/
+/* #define RT_LWIP_IGMP */
+
+/* Enable UDP protocol*/
+#define RT_LWIP_UDP
+
+/* Enable TCP protocol*/
+#define RT_LWIP_TCP
+
+/* the number of simulatenously active TCP connections*/
+#define RT_LWIP_TCP_PCB_NUM	5
+
+/* TCP sender buffer space*/
+#define RT_LWIP_TCP_SND_BUF	1500
+
+/* Enable SNMP protocol*/
+/* #define RT_LWIP_SNMP */
+
+/* Using DHCP*/
+/* #define RT_LWIP_DHCP */
+
+#define RT_LWIP_DNS
+
+/* ip address of target*/
+#define RT_LWIP_IPADDR0	192
+#define RT_LWIP_IPADDR1	168
+#define RT_LWIP_IPADDR2	1
+#define RT_LWIP_IPADDR3	30
+
+/* gateway address of target*/
+#define RT_LWIP_GWADDR0	192
+#define RT_LWIP_GWADDR1	168
+#define RT_LWIP_GWADDR2	1
+#define RT_LWIP_GWADDR3	1
+
+/* mask address of target*/
+#define RT_LWIP_MSKADDR0	255
+#define RT_LWIP_MSKADDR1	255
+#define RT_LWIP_MSKADDR2	255
+#define RT_LWIP_MSKADDR3	0
+
+/* tcp thread options */
+#define RT_LWIP_TCPTHREAD_PRIORITY		120
+#define RT_LWIP_TCPTHREAD_MBOX_SIZE		4
+#define RT_LWIP_TCPTHREAD_STACKSIZE		1024
+
+/* ethernet if thread options */
+#define RT_LWIP_ETHTHREAD_PRIORITY		128
+#define RT_LWIP_ETHTHREAD_MBOX_SIZE		4
+#define RT_LWIP_ETHTHREAD_STACKSIZE		512
+
+#endif

bsp/stm32sky001/startup.c

@@ -0,0 +1,150 @@
+/*
+ * File      : startup.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006, RT-Thread Develop Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://openlab.rt-thread.com/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2006-08-31     Bernard      first implementation
+ */
+
+#include <rthw.h>
+#include <rtthread.h>
+
+#include "board.h"
+#include "rtc.h"
+
+#ifdef RT_USING_LWIP
+#include <netif/ethernetif.h>
+#include "enc28j60.h"
+#endif
+
+/**
+ * @addtogroup STM32
+ */
+
+/*@{*/
+#ifdef RT_USING_FINSH
+extern void finsh_system_init(void);
+extern void finsh_set_device(char* device);
+#endif
+
+extern int  rt_application_init(void);
+
+#ifdef __CC_ARM
+extern int Image$$RW_IRAM1$$ZI$$Limit;
+#elif __ICCARM__
+#pragma section="HEAP"
+#else
+extern int __bss_end;
+#endif
+
+#ifdef  DEBUG
+/*******************************************************************************
+* Function Name  : assert_failed
+* Description    : Reports the name of the source file and the source line number
+*                  where the assert error has occurred.
+* Input          : - file: pointer to the source file name
+*                  - line: assert error line source number
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void assert_failed(u8* file, u32 line)
+{ 
+	rt_kprintf("\n\r Wrong parameter value detected on\r\n");
+	rt_kprintf("       file  %s\r\n", file);
+	rt_kprintf("       line  %d\r\n", line);
+
+	while (1) ;
+}
+#endif
+
+/**
+ * This function will startup RT-Thread RTOS.
+ */
+void rtthread_startup(void)
+{
+	/* init board */
+	rt_hw_board_init();
+
+	/* show version */
+	rt_show_version();
+
+	/* init tick */
+	rt_system_tick_init();
+
+	/* init kernel object */
+	rt_system_object_init();
+
+	/* init timer system */
+	rt_system_timer_init();
+
+#ifdef RT_USING_HEAP
+#ifdef __CC_ARM
+	rt_system_heap_init((void*)&Image$$RW_IRAM1$$ZI$$Limit, (void*)0x20010000);
+#elif __ICCARM__
+    rt_system_heap_init(__segment_end("HEAP"), (void*)0x20010000);
+#else
+	/* init memory system */
+	rt_system_heap_init((void*)&__bss_end, (void*)0x20010000);
+#endif
+#endif
+
+	/* init scheduler system */
+	rt_system_scheduler_init();
+
+#ifdef RT_USING_LWIP
+	eth_system_device_init();
+
+	/* register ethernetif device */
+	rt_hw_enc28j60_init();
+#endif
+
+	rt_hw_rtc_init();
+
+	/* init hardware serial device */
+	rt_hw_usart_init();
+#ifdef RT_USING_DFS
+	rt_hw_sdcard_init();
+#endif
+
+	/* init all device */
+	rt_device_init_all();
+
+	/* init application */
+	rt_application_init();
+
+#ifdef RT_USING_FINSH
+	/* init finsh */
+	finsh_system_init();
+#ifdef RT_USING_DEVICE
+	finsh_set_device("uart1");
+#endif
+#endif
+
+	/* init idle thread */
+	rt_thread_idle_init();
+
+	/* start scheduler */
+	rt_system_scheduler_start();
+
+	/* never reach here */
+	return ;
+}
+
+int main(void)
+{
+	rt_uint32_t UNUSED level;
+	
+	/* disable interrupt first */
+	level = rt_hw_interrupt_disable();
+	rtthread_startup();
+	
+	return 0;
+}
+
+/*@}*/

bsp/stm32sky001/stm32f10x_conf.h

@@ -0,0 +1,174 @@
+/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name          : stm32f10x_conf.h
+* Author             : MCD Application Team
+* Version            : V1.1.2
+* Date               : 09/22/2008
+* Description        : Library configuration file.
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CONF_H
+#define __STM32F10x_CONF_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_type.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Uncomment the line below to compile the library in DEBUG mode, this will expanse
+   the "assert_param" macro in the firmware library code (see "Exported macro"
+   section below) */
+/* #define DEBUG    1*/
+
+/* Comment the line below to disable the specific peripheral inclusion */
+/************************************* ADC ************************************/
+#define _ADC
+#define _ADC1
+#define _ADC2
+#define _ADC3
+
+/************************************* BKP ************************************/
+#define _BKP
+
+/************************************* CAN ************************************/
+#define _CAN
+
+/************************************* CRC ************************************/
+#define _CRC
+
+/************************************* DAC ************************************/
+#define _DAC
+
+/************************************* DBGMCU *********************************/
+#define _DBGMCU
+
+/************************************* DMA ************************************/
+#define _DMA
+#define _DMA1_Channel1
+#define _DMA1_Channel2
+#define _DMA1_Channel3
+#define _DMA1_Channel4
+#define _DMA1_Channel5
+#define _DMA1_Channel6
+#define _DMA1_Channel7
+#define _DMA2_Channel1
+#define _DMA2_Channel2
+#define _DMA2_Channel3
+#define _DMA2_Channel4
+#define _DMA2_Channel5
+
+/************************************* EXTI ***********************************/
+#define _EXTI
+
+/************************************* FLASH and Option Bytes *****************/
+#define _FLASH
+/* Uncomment the line below to enable FLASH program/erase/protections functions,
+   otherwise only FLASH configuration (latency, prefetch, half cycle) functions
+   are enabled */
+/* #define _FLASH_PROG */
+
+/************************************* FSMC ***********************************/
+#define _FSMC
+
+/************************************* GPIO ***********************************/
+#define _GPIO
+#define _GPIOA
+#define _GPIOB
+#define _GPIOC
+#define _GPIOD
+#define _GPIOE
+#define _GPIOF
+#define _GPIOG
+#define _AFIO
+
+/************************************* I2C ************************************/
+#define _I2C
+#define _I2C1
+#define _I2C2
+
+/************************************* IWDG ***********************************/
+#define _IWDG
+
+/************************************* NVIC ***********************************/
+#define _NVIC
+
+/************************************* PWR ************************************/
+#define _PWR
+
+/************************************* RCC ************************************/
+#define _RCC
+
+/************************************* RTC ************************************/
+#define _RTC
+
+/************************************* SDIO ***********************************/
+#define _SDIO
+
+/************************************* SPI ************************************/
+#define _SPI
+#define _SPI1
+#define _SPI2
+#define _SPI3
+
+/************************************* SysTick ********************************/
+#define _SysTick
+
+/************************************* TIM ************************************/
+#define _TIM
+#define _TIM1
+#define _TIM2
+#define _TIM3
+#define _TIM4
+#define _TIM5
+#define _TIM6
+#define _TIM7
+#define _TIM8
+
+/************************************* USART **********************************/
+#define _USART
+#define _USART1
+#define _USART2
+#define _USART3
+#define _UART4
+#define _UART5
+
+/************************************* WWDG ***********************************/
+#define _WWDG
+
+/* In the following line adjust the value of External High Speed oscillator (HSE)
+   used in your application */
+#define HSE_Value    ((u32)8000000) /* Value of the External oscillator in Hz*/
+
+/* In the following line adjust the External High Speed oscillator (HSE) Startup
+   Timeout value */
+#define HSEStartUp_TimeOut    ((u16)0x0500) /* Time out for HSE start up */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  DEBUG
+/*******************************************************************************
+* Macro Name     : assert_param
+* Description    : The assert_param macro is used for function's parameters check.
+*                  It is used only if the library is compiled in DEBUG mode.
+* Input          : - expr: If expr is false, it calls assert_failed function
+*                    which reports the name of the source file and the source
+*                    line number of the call that failed.
+*                    If expr is true, it returns no value.
+* Return         : None
+*******************************************************************************/
+  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((u8 *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(u8* file, u32 line);
+#else
+  #define assert_param(expr) ((void)0)
+#endif /* DEBUG */
+
+#endif /* __STM32F10x_CONF_H */
+
+/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/

bsp/stm32sky001/stm32f10x_flash.icf

@@ -0,0 +1,32 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
+define symbol __ICFEDIT_region_ROM_end__   = 0x0007FFFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__   = 0x2000FFFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x200;
+define symbol __ICFEDIT_size_heap__   = 0x000;
+/**** End of ICF editor section. ###ICF###*/
+
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section FSymTab };
+keep { section VSymTab };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite, block CSTACK, last block HEAP};

bsp/stm32sky001/stm32f10x_it.c

@@ -0,0 +1,921 @@
+/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name          : stm32f10x_it.c
+* Author             : MCD Application Team
+* Version            : V1.1.2
+* Date               : 09/22/2008
+* Description        : Main Interrupt Service Routines.
+*                      This file provides template for all exceptions handler
+*                      and peripherals interrupt service routine.
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Includes ------------------------------------------------------------------*/
+#include <rtthread.h>
+#include <serial.h>
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+extern void rt_hw_timer_handler(void);
+extern void rt_hw_interrupt_thread_switch(void);
+
+/*******************************************************************************
+* Function Name  : NMIException
+* Description    : This function handles NMI exception.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void NMIException(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : HardFaultException
+* Description    : This function handles Hard Fault exception.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void HardFaultException(void)
+{
+  /* Go to infinite loop when Hard Fault exception occurs */
+  rt_kprintf("hard fault exception\n");
+  while (1)
+  {
+  }
+}
+
+/*******************************************************************************
+* Function Name  : MemManageException
+* Description    : This function handles Memory Manage exception.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void MemManageException(void)
+{
+  /* Go to infinite loop when Memory Manage exception occurs */
+  rt_kprintf("memory manage exception\n");
+  while (1)
+  {
+  }
+}
+
+/*******************************************************************************
+* Function Name  : BusFaultException
+* Description    : This function handles Bus Fault exception.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void BusFaultException(void)
+{
+  /* Go to infinite loop when Bus Fault exception occurs */
+  rt_kprintf("bus fault exception\n");
+  while (1)
+  {
+  }
+}
+
+/*******************************************************************************
+* Function Name  : UsageFaultException
+* Description    : This function handles Usage Fault exception.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void UsageFaultException(void)
+{
+  /* Go to infinite loop when Usage Fault exception occurs */
+  rt_kprintf("usage fault exception\n");
+  while (1)
+  {
+  }
+}
+
+/*******************************************************************************
+* Function Name  : DebugMonitor
+* Description    : This function handles Debug Monitor exception.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void DebugMonitor(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : SVCHandler
+* Description    : This function handles SVCall exception.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void SVCHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : SysTickHandler
+* Description    : This function handles SysTick Handler.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void SysTickHandler(void)
+{
+  /* handle os tick */
+  rt_hw_timer_handler();
+}
+
+/*******************************************************************************
+* Function Name  : WWDG_IRQHandler
+* Description    : This function handles WWDG interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void WWDG_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : PVD_IRQHandler
+* Description    : This function handles PVD interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void PVD_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : TAMPER_IRQHandler
+* Description    : This function handles Tamper interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void TAMPER_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : RTC_IRQHandler
+* Description    : This function handles RTC global interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void RTC_IRQHandler(void)
+{
+  if (RTC_GetITStatus(RTC_IT_SEC) != RESET)
+  {
+    /* Clear the RTC Second interrupt */
+    RTC_ClearITPendingBit(RTC_IT_SEC);
+
+    /* Wait until last write operation on RTC registers has finished */
+    RTC_WaitForLastTask();
+
+    /* Reset RTC Counter when Time is 23:59:59 */
+    if (RTC_GetCounter() == 0x00015180)
+    {
+      RTC_SetCounter(0x0);
+      /* Wait until last write operation on RTC registers has finished */
+      RTC_WaitForLastTask();
+    }
+  }
+}
+
+/*******************************************************************************
+* Function Name  : FLASH_IRQHandler
+* Description    : This function handles Flash interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void FLASH_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : RCC_IRQHandler
+* Description    : This function handles RCC interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void RCC_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : EXTI0_IRQHandler
+* Description    : This function handles External interrupt Line 0 request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void EXTI0_IRQHandler(void)
+{
+#ifdef RT_USING_LWIP
+	extern void enc28j60_isr(void);
+
+	/* enter interrupt */
+	rt_interrupt_enter();
+
+	enc28j60_isr();
+	
+	/* Clear the Key Button EXTI line pending bit */
+	EXTI_ClearITPendingBit(EXTI_Line0);
+
+	/* leave interrupt */
+	rt_interrupt_leave();
+	rt_hw_interrupt_thread_switch();
+#endif
+}
+
+/*******************************************************************************
+* Function Name  : EXTI1_IRQHandler
+* Description    : This function handles External interrupt Line 1 request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void EXTI1_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : EXTI2_IRQHandler
+* Description    : This function handles External interrupt Line 2 request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void EXTI2_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : EXTI3_IRQHandler
+* Description    : This function handles External interrupt Line 3 request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void EXTI3_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : EXTI4_IRQHandler
+* Description    : This function handles External interrupt Line 4 request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void EXTI4_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : DMA1_Channel1_IRQHandler
+* Description    : This function handles DMA1 Channel 1 interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void DMA1_Channel1_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : DMA1_Channel2_IRQHandler
+* Description    : This function handles DMA1 Channel 2 interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void DMA1_Channel2_IRQHandler(void)
+{
+#ifdef RT_USING_UART3
+	extern struct rt_device uart3_device;
+
+	/* enter interrupt */
+	rt_interrupt_enter();
+
+	if (DMA_GetITStatus(DMA1_IT_TC2))
+	{
+		/* transmission complete, invoke serial dma tx isr */
+		rt_hw_serial_dma_tx_isr(&uart3_device);
+	}
+	
+	/* clear DMA flag */
+	DMA_ClearFlag(DMA1_FLAG_TC2 | DMA1_FLAG_TE2);
+	
+	/* leave interrupt */
+	rt_interrupt_leave();
+	rt_hw_interrupt_thread_switch();
+#endif
+}
+
+/*******************************************************************************
+* Function Name  : DMA1_Channel3_IRQHandler
+* Description    : This function handles DMA1 Channel 3 interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void DMA1_Channel3_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : DMA1_Channel4_IRQHandler
+* Description    : This function handles DMA1 Channel 4 interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void DMA1_Channel4_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : DMA1_Channel5_IRQHandler
+* Description    : This function handles DMA1 Channel 5 interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void DMA1_Channel5_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : DMA1_Channel6_IRQHandler
+* Description    : This function handles DMA1 Channel 6 interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void DMA1_Channel6_IRQHandler(void)
+{
+#ifdef RT_USING_UART2
+	extern struct rt_device uart2_device;
+
+	/* enter interrupt */
+	rt_interrupt_enter();
+
+	/* clear DMA flag */
+	DMA_ClearFlag(DMA1_FLAG_TC6 | DMA1_FLAG_TE6);
+	rt_hw_serial_dma_rx_isr(&uart2_device);
+
+	/* leave interrupt */
+	rt_interrupt_leave();
+	rt_hw_interrupt_thread_switch();
+#endif
+}
+
+/*******************************************************************************
+* Function Name  : DMA1_Channel7_IRQHandler
+* Description    : This function handles DMA1 Channel 7 interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void DMA1_Channel7_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : ADC1_2_IRQHandler
+* Description    : This function handles ADC1 and ADC2 global interrupts requests.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void ADC1_2_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : USB_HP_CAN_TX_IRQHandler
+* Description    : This function handles USB High Priority or CAN TX interrupts
+*                  requests.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void USB_HP_CAN_TX_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : USB_LP_CAN_RX0_IRQHandler
+* Description    : This function handles USB Low Priority or CAN RX0 interrupts
+*                  requests.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void USB_LP_CAN_RX0_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : CAN_RX1_IRQHandler
+* Description    : This function handles CAN RX1 interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void CAN_RX1_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : CAN_SCE_IRQHandler
+* Description    : This function handles CAN SCE interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void CAN_SCE_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : EXTI9_5_IRQHandler
+* Description    : This function handles External lines 9 to 5 interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void EXTI9_5_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : TIM1_BRK_IRQHandler
+* Description    : This function handles TIM1 Break interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void TIM1_BRK_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : TIM1_UP_IRQHandler
+* Description    : This function handles TIM1 overflow and update interrupt
+*                  request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void TIM1_UP_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : TIM1_TRG_COM_IRQHandler
+* Description    : This function handles TIM1 Trigger and commutation interrupts
+*                  requests.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void TIM1_TRG_COM_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : TIM1_CC_IRQHandler
+* Description    : This function handles TIM1 capture compare interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void TIM1_CC_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : TIM2_IRQHandler
+* Description    : This function handles TIM2 global interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void TIM2_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : TIM3_IRQHandler
+* Description    : This function handles TIM3 global interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void TIM3_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : TIM4_IRQHandler
+* Description    : This function handles TIM4 global interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void TIM4_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : I2C1_EV_IRQHandler
+* Description    : This function handles I2C1 Event interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void I2C1_EV_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : I2C1_ER_IRQHandler
+* Description    : This function handles I2C1 Error interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void I2C1_ER_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : I2C2_EV_IRQHandler
+* Description    : This function handles I2C2 Event interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void I2C2_EV_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : I2C2_ER_IRQHandler
+* Description    : This function handles I2C2 Error interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void I2C2_ER_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : SPI1_IRQHandler
+* Description    : This function handles SPI1 global interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void SPI1_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : SPI2_IRQHandler
+* Description    : This function handles SPI2 global interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void SPI2_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : USART1_IRQHandler
+* Description    : This function handles USART1 global interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void USART1_IRQHandler(void)
+{
+#ifdef RT_USING_UART1
+	extern struct rt_device uart1_device;
+	/* enter interrupt */
+	rt_interrupt_enter();
+
+	rt_hw_serial_isr(&uart1_device);
+
+	/* leave interrupt */
+	rt_interrupt_leave();
+	rt_hw_interrupt_thread_switch();
+#endif
+}
+
+/*******************************************************************************
+* Function Name  : USART2_IRQHandler
+* Description    : This function handles USART2 global interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void USART2_IRQHandler(void)
+{
+#ifdef RT_USING_UART2
+	extern struct rt_device uart2_device;
+
+	/* enter interrupt */
+	rt_interrupt_enter();
+
+	rt_hw_serial_isr(&uart2_device);
+
+	/* leave interrupt */
+	rt_interrupt_leave();
+	rt_hw_interrupt_thread_switch();
+#endif
+}
+
+/*******************************************************************************
+* Function Name  : USART3_IRQHandler
+* Description    : This function handles USART3 global interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void USART3_IRQHandler(void)
+{
+#ifdef RT_USING_UART3
+	extern struct rt_device uart3_device;
+
+	/* enter interrupt */
+	rt_interrupt_enter();
+
+	rt_hw_serial_isr(&uart3_device);
+
+	/* leave interrupt */
+	rt_interrupt_leave();
+	rt_hw_interrupt_thread_switch();
+#endif
+}
+
+/*******************************************************************************
+* Function Name  : EXTI15_10_IRQHandler
+* Description    : This function handles External lines 15 to 10 interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void EXTI15_10_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : RTCAlarm_IRQHandler
+* Description    : This function handles RTC Alarm interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void RTCAlarm_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : USBWakeUp_IRQHandler
+* Description    : This function handles USB WakeUp interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void USBWakeUp_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : TIM8_BRK_IRQHandler
+* Description    : This function handles TIM8 Break interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void TIM8_BRK_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : TIM8_UP_IRQHandler
+* Description    : This function handles TIM8 overflow and update interrupt
+*                  request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void TIM8_UP_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : TIM8_TRG_COM_IRQHandler
+* Description    : This function handles TIM8 Trigger and commutation interrupts
+*                  requests.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void TIM8_TRG_COM_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : TIM8_CC_IRQHandler
+* Description    : This function handles TIM8 capture compare interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void TIM8_CC_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : ADC3_IRQHandler
+* Description    : This function handles ADC3 global interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void ADC3_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : FSMC_IRQHandler
+* Description    : This function handles FSMC global interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void FSMC_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : SDIO_IRQHandler
+* Description    : This function handles SDIO global interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void SDIO_IRQHandler(void)
+{
+#ifdef RT_USING_DFS
+	extern int SD_ProcessIRQSrc(void);
+
+	/* enter interrupt */
+	rt_interrupt_enter();
+
+	/* Process All SDIO Interrupt Sources */
+	SD_ProcessIRQSrc();
+
+	/* leave interrupt */
+	rt_interrupt_leave();
+	rt_hw_interrupt_thread_switch();
+#endif
+}
+
+/*******************************************************************************
+* Function Name  : TIM5_IRQHandler
+* Description    : This function handles TIM5 global interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void TIM5_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : SPI3_IRQHandler
+* Description    : This function handles SPI3 global interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void SPI3_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : UART4_IRQHandler
+* Description    : This function handles UART4 global interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void UART4_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : UART5_IRQHandler
+* Description    : This function handles UART5 global interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void UART5_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : TIM6_IRQHandler
+* Description    : This function handles TIM6 global interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void TIM6_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : TIM7_IRQHandler
+* Description    : This function handles TIM7 global interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void TIM7_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : DMA2_Channel1_IRQHandler
+* Description    : This function handles DMA2 Channel 1 interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void DMA2_Channel1_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : DMA2_Channel2_IRQHandler
+* Description    : This function handles DMA2 Channel 2 interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void DMA2_Channel2_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : DMA2_Channel3_IRQHandler
+* Description    : This function handles DMA2 Channel 3 interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void DMA2_Channel3_IRQHandler(void)
+{
+}
+
+/*******************************************************************************
+* Function Name  : DMA2_Channel4_5_IRQHandler
+* Description    : This function handles DMA2 Channel 4 and DMA2 Channel 5
+*                  interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void DMA2_Channel4_5_IRQHandler(void)
+{
+}
+
+/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/

bsp/stm32sky001/stm32f10x_it.h

@@ -0,0 +1,100 @@
+/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
+* File Name          : stm32f10x_it.h
+* Author             : MCD Application Team
+* Version            : V2.0.3
+* Date               : 09/22/2008
+* Description        : This file contains the headers of the interrupt handlers.
+********************************************************************************
+* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
+* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
+* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
+* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
+* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+*******************************************************************************/
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_IT_H
+#define __STM32F10x_IT_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_lib.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+void NMIException(void);
+void HardFaultException(void);
+void MemManageException(void);
+void BusFaultException(void);
+void UsageFaultException(void);
+void DebugMonitor(void);
+void SVCHandler(void);
+void rt_hw_pend_sv(void);
+void SysTickHandler(void);
+void WWDG_IRQHandler(void);
+void PVD_IRQHandler(void);
+void TAMPER_IRQHandler(void);
+void RTC_IRQHandler(void);
+void FLASH_IRQHandler(void);
+void RCC_IRQHandler(void);
+void EXTI0_IRQHandler(void);
+void EXTI1_IRQHandler(void);
+void EXTI2_IRQHandler(void);
+void EXTI3_IRQHandler(void);
+void EXTI4_IRQHandler(void);
+void DMA1_Channel1_IRQHandler(void);
+void DMA1_Channel2_IRQHandler(void);
+void DMA1_Channel3_IRQHandler(void);
+void DMA1_Channel4_IRQHandler(void);
+void DMA1_Channel5_IRQHandler(void);
+void DMA1_Channel6_IRQHandler(void);
+void DMA1_Channel7_IRQHandler(void);
+void ADC1_2_IRQHandler(void);
+void USB_HP_CAN_TX_IRQHandler(void);
+void USB_LP_CAN_RX0_IRQHandler(void);
+void CAN_RX1_IRQHandler(void);
+void CAN_SCE_IRQHandler(void);
+void EXTI9_5_IRQHandler(void);
+void TIM1_BRK_IRQHandler(void);
+void TIM1_UP_IRQHandler(void);
+void TIM1_TRG_COM_IRQHandler(void);
+void TIM1_CC_IRQHandler(void);
+void TIM2_IRQHandler(void);
+void TIM3_IRQHandler(void);
+void TIM4_IRQHandler(void);
+void I2C1_EV_IRQHandler(void);
+void I2C1_ER_IRQHandler(void);
+void I2C2_EV_IRQHandler(void);
+void I2C2_ER_IRQHandler(void);
+void SPI1_IRQHandler(void);
+void SPI2_IRQHandler(void);
+void USART1_IRQHandler(void);
+void USART2_IRQHandler(void);
+void USART3_IRQHandler(void);
+void EXTI15_10_IRQHandler(void);
+void RTCAlarm_IRQHandler(void);
+void USBWakeUp_IRQHandler(void);
+void TIM8_BRK_IRQHandler(void);
+void TIM8_UP_IRQHandler(void);
+void TIM8_TRG_COM_IRQHandler(void);
+void TIM8_CC_IRQHandler(void);
+void ADC3_IRQHandler(void);
+void FSMC_IRQHandler(void);
+void SDIO_IRQHandler(void);
+void TIM5_IRQHandler(void);
+void SPI3_IRQHandler(void);
+void UART4_IRQHandler(void);
+void UART5_IRQHandler(void);
+void TIM6_IRQHandler(void);
+void TIM7_IRQHandler(void);
+void DMA2_Channel1_IRQHandler(void);
+void DMA2_Channel2_IRQHandler(void);
+void DMA2_Channel3_IRQHandler(void);
+void DMA2_Channel4_5_IRQHandler(void);
+					 
+#endif /* __STM32F10x_IT_H */
+
+/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/

bsp/stm32sky001/usart.c

@@ -0,0 +1,341 @@
+#include "usart.h"
+#include <serial.h>
+
+#include <stm32f10x_lib.h>
+#include <stm32f10x_map.h>
+
+/*
+ * Use UART1 as console output and finsh input
+ * interrupt Rx and poll Tx (stream mode)
+ *
+ * Use UART2 with DMA Rx and poll Tx -- DMA channel 6
+ * Use UART3 with DMA Tx and interrupt Rx -- DMA channel 2
+ *
+ * USART DMA setting on STM32
+ * USART1 Tx --> DMA Channel 4
+ * USART1 Rx --> DMA Channel 5
+ * USART2 Tx --> DMA Channel 7
+ * USART2 Rx --> DMA Channel 6
+ * USART3 Tx --> DMA Channel 2
+ * USART3 Rx --> DMA Channel 3
+ */
+
+#ifdef RT_USING_UART1
+struct stm32_serial_int_rx uart1_int_rx;
+struct stm32_serial_device uart1 = 
+{
+	USART1,
+	&uart1_int_rx,
+	RT_NULL,
+	RT_NULL,
+	RT_NULL
+};
+struct rt_device uart1_device;
+#endif
+
+#ifdef RT_USING_UART2
+struct stm32_serial_int_rx uart2_int_rx;
+struct stm32_serial_dma_rx uart2_dma_rx;
+struct stm32_serial_device uart2 = 
+{
+	USART2,
+	&uart2_int_rx,
+	&uart2_dma_rx,
+	RT_NULL,
+	RT_NULL
+};
+struct rt_device uart2_device;
+#endif
+
+#ifdef RT_USING_UART3
+struct stm32_serial_int_rx uart3_int_rx;
+struct stm32_serial_dma_tx uart3_dma_tx;
+struct stm32_serial_device uart3 = 
+{
+	USART3,
+	&uart3_int_rx,
+	RT_NULL,
+	RT_NULL,
+	&uart3_dma_tx
+};
+struct rt_device uart3_device;
+#endif
+
+#define USART1_DR_Base  0x40013804
+#define USART2_DR_Base  0x40004404
+#define USART3_DR_Base  0x40004804
+
+/* USART1_REMAP = 0 */
+#define UART1_GPIO_TX	GPIO_Pin_9
+#define UART1_GPIO_RX	GPIO_Pin_10
+#define UART1_GPIO		GPIOA
+#define RCC_APBPeriph_UART1	RCC_APB2Periph_USART1
+#define UART1_TX_DMA		DMA1_Channel4
+#define UART1_RX_DMA		DMA1_Channel5
+
+/* USART2_REMAP = 0 */
+#define UART2_GPIO_TX		GPIO_Pin_2
+#define UART2_GPIO_RX		GPIO_Pin_3
+#define UART2_GPIO			GPIOA
+#define RCC_APBPeriph_UART2	RCC_APB1Periph_USART2
+#define UART2_TX_DMA		DMA1_Channel7
+#define UART2_RX_DMA		DMA1_Channel6
+
+/* USART3_REMAP[1:0] = 00 */
+#define UART3_GPIO_RX		GPIO_Pin_11
+#define UART3_GPIO_TX		GPIO_Pin_10
+#define UART3_GPIO			GPIOB
+#define RCC_APBPeriph_UART3	RCC_APB1Periph_USART3
+#define UART3_TX_DMA		DMA1_Channel2
+#define UART3_RX_DMA		DMA1_Channel3
+
+static void RCC_Configuration(void)
+{
+	RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE);
+
+#ifdef RT_USING_UART1
+	/* Enable USART1 and GPIOA clocks */
+	RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE);
+#endif
+
+#ifdef RT_USING_UART2
+	/* Enable GPIOD clocks */
+	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD, ENABLE);
+	/* Enable USART2 clock */
+	RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE);
+#endif
+
+#ifdef RT_USING_UART3
+	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
+	/* Enable USART3 clock */
+	RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART3, ENABLE);
+#endif
+
+#if defined (RT_USING_UART2) || defined (RT_USING_UART3)
+	/* DMA clock enable */
+	RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE);
+#endif
+}
+
+static void GPIO_Configuration(void)
+{
+	GPIO_InitTypeDef GPIO_InitStructure;
+
+#ifdef RT_USING_UART1
+	/* Configure USART1 Rx (PA.10) as input floating */
+	GPIO_InitStructure.GPIO_Pin = UART1_GPIO_RX;
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+	GPIO_Init(UART1_GPIO, &GPIO_InitStructure);
+
+	/* Configure USART1 Tx (PA.09) as alternate function push-pull */
+	GPIO_InitStructure.GPIO_Pin = UART1_GPIO_TX;
+	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+	GPIO_Init(UART1_GPIO, &GPIO_InitStructure);
+#endif
+
+#ifdef RT_USING_UART2
+	/* Configure USART2 Rx as input floating */
+	GPIO_InitStructure.GPIO_Pin = UART2_GPIO_RX;
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+	GPIO_Init(UART2_GPIO, &GPIO_InitStructure);
+
+	/* Configure USART2 Tx as alternate function push-pull */
+	GPIO_InitStructure.GPIO_Pin = UART2_GPIO_TX;
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+	GPIO_Init(UART2_GPIO, &GPIO_InitStructure);
+#endif
+
+#ifdef RT_USING_UART3
+	/* Configure USART3 Rx as input floating */
+	GPIO_InitStructure.GPIO_Pin = UART3_GPIO_RX;
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+	GPIO_Init(UART3_GPIO, &GPIO_InitStructure);
+
+	/* Configure USART3 Tx as alternate function push-pull */
+	GPIO_InitStructure.GPIO_Pin = UART3_GPIO_TX;
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+	GPIO_Init(UART3_GPIO, &GPIO_InitStructure);
+#endif
+}
+
+static void NVIC_Configuration(void)
+{
+	NVIC_InitTypeDef NVIC_InitStructure;
+	
+	/* Configure the NVIC Preemption Priority Bits */  
+	NVIC_PriorityGroupConfig(NVIC_PriorityGroup_0);
+
+#ifdef RT_USING_UART1
+	/* Enable the USART1 Interrupt */
+	NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQChannel;
+	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
+	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+	NVIC_Init(&NVIC_InitStructure);
+#endif
+
+#ifdef RT_USING_UART2
+	/* Enable the USART2 Interrupt */
+	NVIC_InitStructure.NVIC_IRQChannel = USART2_IRQChannel;
+	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
+	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+	NVIC_Init(&NVIC_InitStructure);
+
+	/* Enable the DMA1 Channel6 Interrupt */
+	NVIC_InitStructure.NVIC_IRQChannel = DMA1_Channel6_IRQChannel;
+	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
+	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+	NVIC_Init(&NVIC_InitStructure);
+#endif
+
+#ifdef RT_USING_UART3
+	/* Enable the USART3 Interrupt */
+	NVIC_InitStructure.NVIC_IRQChannel = USART3_IRQChannel;
+	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
+	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+	NVIC_Init(&NVIC_InitStructure);
+
+	/* Enable the DMA1 Channel2 Interrupt */
+	NVIC_InitStructure.NVIC_IRQChannel = DMA1_Channel2_IRQChannel;
+	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
+	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+	NVIC_Init(&NVIC_InitStructure);
+#endif
+}
+
+static void DMA_Configuration(void)
+{
+#if defined(RT_USING_UART2) || defined (RT_USING_UART3)
+	DMA_InitTypeDef DMA_InitStructure;
+
+	/* fill init structure */
+	DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
+	DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
+	DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
+	DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
+	DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
+	DMA_InitStructure.DMA_Priority = DMA_Priority_VeryHigh;
+	DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
+#endif
+
+#ifdef RT_USING_UART2
+	/* DMA1 Channel4 (triggered by USART2 Rx event) Config */
+	DMA_DeInit(UART2_RX_DMA);
+	DMA_InitStructure.DMA_PeripheralBaseAddr = USART2_DR_Base;
+	DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;
+	DMA_InitStructure.DMA_MemoryBaseAddr = (u32)0;
+	DMA_InitStructure.DMA_BufferSize = 0;
+	DMA_Init(UART2_RX_DMA, &DMA_InitStructure);
+	DMA_ITConfig(UART2_RX_DMA, DMA_IT_TC | DMA_IT_TE, ENABLE);
+	DMA_ClearFlag(DMA1_FLAG_TC4);
+#endif
+
+#ifdef RT_USING_UART3
+	/* DMA1 Channel5 (triggered by USART3 Tx event) Config */
+	DMA_DeInit(UART3_TX_DMA);
+	DMA_InitStructure.DMA_PeripheralBaseAddr = USART3_DR_Base;
+	DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST;
+	DMA_InitStructure.DMA_MemoryBaseAddr = (u32)0;
+	DMA_InitStructure.DMA_BufferSize = 0;
+	DMA_Init(UART3_TX_DMA, &DMA_InitStructure);
+	DMA_ITConfig(UART3_TX_DMA, DMA_IT_TC | DMA_IT_TE, ENABLE);
+	DMA_ClearFlag(DMA1_FLAG_TC5);
+#endif
+}
+
+/*
+ * Init all related hardware in here
+ * rt_hw_serial_init() will register all supported USART device
+ */
+void rt_hw_usart_init()
+{
+	USART_InitTypeDef USART_InitStructure;
+	USART_ClockInitTypeDef USART_ClockInitStructure;
+
+	RCC_Configuration();
+	
+	GPIO_Configuration();
+	
+	NVIC_Configuration();
+	
+	DMA_Configuration();
+	
+	/* uart init */
+#ifdef RT_USING_UART1
+	USART_InitStructure.USART_BaudRate = 115200;
+	USART_InitStructure.USART_WordLength = USART_WordLength_8b;
+	USART_InitStructure.USART_StopBits = USART_StopBits_1;
+	USART_InitStructure.USART_Parity = USART_Parity_No;
+	USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
+	USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
+	USART_ClockInitStructure.USART_Clock = USART_Clock_Disable;
+	USART_ClockInitStructure.USART_CPOL = USART_CPOL_Low;
+	USART_ClockInitStructure.USART_CPHA = USART_CPHA_2Edge;
+	USART_ClockInitStructure.USART_LastBit = USART_LastBit_Disable;
+	USART_Init(USART1, &USART_InitStructure);
+	USART_ClockInit(USART1, &USART_ClockInitStructure);
+
+	/* register uart1 */
+	rt_hw_serial_register(&uart1_device, "uart1", 
+		RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
+		&uart1);
+	
+	/* enable interrupt */
+	USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);
+#endif
+
+#ifdef RT_USING_UART2
+	USART_InitStructure.USART_BaudRate = 115200;
+	USART_InitStructure.USART_WordLength = USART_WordLength_8b;
+	USART_InitStructure.USART_StopBits = USART_StopBits_1;
+	USART_InitStructure.USART_Parity = USART_Parity_No;
+	USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
+	USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
+	USART_ClockInitStructure.USART_Clock = USART_Clock_Disable;
+	USART_ClockInitStructure.USART_CPOL = USART_CPOL_Low;
+	USART_ClockInitStructure.USART_CPHA = USART_CPHA_2Edge;
+	USART_ClockInitStructure.USART_LastBit = USART_LastBit_Disable;
+	USART_Init(USART2, &USART_InitStructure);
+	USART_ClockInit(USART2, &USART_ClockInitStructure);
+
+	uart2_dma_rx.dma_channel= UART2_RX_DMA;
+	
+	/* register uart2 */
+	rt_hw_serial_register(&uart2_device, "uart2", 
+		RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_DMA_RX,
+		&uart2);
+
+	/* Enable USART2 DMA Rx request */
+	USART_DMACmd(USART2, USART_DMAReq_Rx , ENABLE);
+#endif
+
+#ifdef RT_USING_UART3
+	USART_InitStructure.USART_BaudRate = 115200;
+	USART_InitStructure.USART_WordLength = USART_WordLength_8b;
+	USART_InitStructure.USART_StopBits = USART_StopBits_1;
+	USART_InitStructure.USART_Parity = USART_Parity_No;
+	USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
+	USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
+	USART_ClockInitStructure.USART_Clock = USART_Clock_Disable;
+	USART_ClockInitStructure.USART_CPOL = USART_CPOL_Low;
+	USART_ClockInitStructure.USART_CPHA = USART_CPHA_2Edge;
+	USART_ClockInitStructure.USART_LastBit = USART_LastBit_Disable;
+	USART_Init(USART3, &USART_InitStructure);
+	USART_ClockInit(USART3, &USART_ClockInitStructure);
+
+	uart3_dma_tx.dma_channel= UART3_TX_DMA;
+
+	/* register uart3 */
+	rt_hw_serial_register(&uart3_device, "uart3", 
+		RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_DMA_TX,
+		&uart3);
+
+	/* Enable USART3 DMA Tx request */
+	USART_DMACmd(USART3, USART_DMAReq_Tx , ENABLE);
+
+	/* enable interrupt */
+	USART_ITConfig(USART3, USART_IT_RXNE, ENABLE);
+#endif
+}

bsp/stm32sky001/usart.h

@@ -0,0 +1,9 @@
+#ifndef __USART_H__
+#define __USART_H__
+
+#include <rthw.h>
+#include <rtthread.h>
+
+void rt_hw_usart_init(void);
+
+#endif