|
|
@@ -30,17 +30,17 @@ The driver libraries currently provided by RT-Thread already support multiple se
|
|
|
|
|
|
| Driver | Introduction |
|
|
|
| ------------------------------------------------------------ | ------------------------------------------------ |
|
|
|
-| [GPIO](https://www.rt-thread.org/document/site/programming-manual/device/pin/pin/) | Operate the GPIO pins |
|
|
|
-| [UART](https://www.rt-thread.org/document/site/programming-manual/device/uart/uart/) | Send and receive data through serial ports |
|
|
|
-| [I2C](https://www.rt-thread.org/document/site/programming-manual/device/i2c/i2c/) | Send and receive data via software I2C |
|
|
|
-| [SPI](https://www.rt-thread.org/document/site/programming-manual/device/spi/spi/) | Send and receive data over SPI |
|
|
|
-| [ADC](https://www.rt-thread.org/document/site/programming-manual/device/adc/adc/) | Measure the analog data on the pin |
|
|
|
+| [GPIO](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/pin/pin) | Operate the GPIO pins |
|
|
|
+| [UART](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/uart/uart_v1/uart) | Send and receive data through serial ports |
|
|
|
+| [I2C](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/i2c/i2c) | Send and receive data via software I2C |
|
|
|
+| [SPI](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/spi/spi) | Send and receive data over SPI |
|
|
|
+| [ADC](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/adc/adc) | Measure the analog data on the pin |
|
|
|
| SDIO | Read and write data through SDIO |
|
|
|
-| [TIMER](https://www.rt-thread.org/document/site/programming-manual/device/hwtimer/hwtimer/) | Use hardware timers to implement the function of measuring time and timing execution callback functions |
|
|
|
-| [PWM](https://www.rt-thread.org/document/site/programming-manual/device/pwm/pwm/) | Outputs a PWM waveform at a specific pin |
|
|
|
-| [RTC](https://www.rt-thread.org/document/site/programming-manual/device/rtc/rtc/) | Set and read times |
|
|
|
-| [WDT](https://www.rt-thread.org/document/site/programming-manual/device/watchdog/watchdog/) | Watchdog driver |
|
|
|
-| [QSPI](https://www.rt-thread.org/document/site/programming-manual/device/spi/spi/#qspi_1) | Send and receive data via SPI (1, 2, 4-wire). |
|
|
|
+| [TIMER](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/hwtimer/hwtimer) | Use hardware timers to implement the function of measuring time and timing execution callback functions |
|
|
|
+| [PWM](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/pwm/pwm) | Outputs a PWM waveform at a specific pin |
|
|
|
+| [RTC](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/rtc/rtc) | Set and read times |
|
|
|
+| [WDT](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/watchdog/watchdog) | Watchdog driver |
|
|
|
+| [QSPI](https://www.rt-thread.org/document/site/#/rt-thread-version/rt-thread-standard/programming-manual/device/spi/spi?id=配置-qspi-设备) | Send and receive data via SPI (1, 2, 4-wire). |
|
|
|
|
|
|
### 2.2 On-board peripherals
|
|
|
|
arche8