[bsp/stm32] format code

bsp/stm32/stm32h750-weact-ministm32h7xx/applications/main.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006-2018, RT-Thread Development Team
+ * Copyright (c) 2006-2022, RT-Thread Development Team
  *
  * SPDX-License-Identifier: Apache-2.0
  *

bsp/stm32/stm32h750-weact-ministm32h7xx/board/CubeMX_Config/Inc/stm32h7xx_hal_conf.h

@@ -167,7 +167,7 @@
 #define  TICK_INT_PRIORITY            ((uint32_t)0U) /*!< tick interrupt priority */
 #define  USE_RTOS                     0U
 #define  USE_SD_TRANSCEIVER           0U               /*!< use uSD Transceiver */
-#define  USE_SPI_CRC	              0U               /*!< use CRC in SPI */
+#define  USE_SPI_CRC                  0U               /*!< use CRC in SPI */
 
 #define  USE_HAL_ADC_REGISTER_CALLBACKS     0U /* ADC register callback disabled     */
 #define  USE_HAL_CEC_REGISTER_CALLBACKS     0U /* CEC register callback disabled     */

bsp/stm32/stm32h750-weact-ministm32h7xx/board/CubeMX_Config/Src/system_stm32h7xx.c

@@ -153,7 +153,7 @@ void SystemInit (void)
   if(FLASH_LATENCY_DEFAULT  > (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)))
   {
     /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
-	MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(FLASH_LATENCY_DEFAULT));
+    MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(FLASH_LATENCY_DEFAULT));
   }
 
   /* Set HSION bit */
@@ -164,12 +164,12 @@ void SystemInit (void)
 
   /* Reset HSEON, HSECSSON, CSION, HSI48ON, CSIKERON, PLL1ON, PLL2ON and PLL3ON bits */
   RCC->CR &= 0xEAF6ED7FU;
-  
+
    /* Decreasing the number of wait states because of lower CPU frequency */
   if(FLASH_LATENCY_DEFAULT  < (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)))
   {
     /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
-	MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(FLASH_LATENCY_DEFAULT));
+    MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(FLASH_LATENCY_DEFAULT));
   }
 
 #if defined(D3_SRAM_BASE)

bsp/stm32/stm32h750-weact-ministm32h7xx/board/board.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006-2020, RT-Thread Development Team
+ * Copyright (c) 2006-2022, RT-Thread Development Team
  *
  * SPDX-License-Identifier: Apache-2.0
  *

bsp/stm32/stm32h750-weact-ministm32h7xx/board/board.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006-2020, RT-Thread Development Team
+ * Copyright (c) 2006-2022, RT-Thread Development Team
  *
  * SPDX-License-Identifier: Apache-2.0
  *

bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/drv_lcd_spi.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006-2020, RT-Thread Development Team
+ * Copyright (c) 2006-2022, RT-Thread Development Team
  *
  * SPDX-License-Identifier: Apache-2.0
  *

bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/drv_qspi_flash.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006-2020, RT-Thread Development Team
+ * Copyright (c) 2006-2022, RT-Thread Development Team
  *
  * SPDX-License-Identifier: Apache-2.0
  *

bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/drv_spi_flash.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006-2020, RT-Thread Development Team
+ * Copyright (c) 2006-2022, RT-Thread Development Team
  *
  * SPDX-License-Identifier: Apache-2.0
  *
@@ -26,8 +26,8 @@
 
 static int rt_hw_spi_flash_with_sfud_init(void)
 {
-	rt_err_t err = RT_EOK;
-	rt_hw_spi_device_attach("spi1", "spi10", SPI_CS_GPIO, SPI_CS_PIN);
+    rt_err_t err = RT_EOK;
+    rt_hw_spi_device_attach("spi1", "spi10", SPI_CS_GPIO, SPI_CS_PIN);
 
     /* init W25Q16    , And register as a block device */
     if (RT_NULL == rt_sfud_flash_probe(FAL_USING_NOR_FLASH_DEV_NAME, "spi10"))

bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/lcd_port.h

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006-2020, RT-Thread Development Team
+ * Copyright (c) 2006-2022, RT-Thread Development Team
  *
  * SPDX-License-Identifier: Apache-2.0
  *

bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/st7735/lcd.c

@@ -12,14 +12,14 @@ static int32_t lcd_senddata(uint8_t* pdata,uint32_t length);
 static int32_t lcd_recvdata(uint8_t* pdata,uint32_t length);
 
 ST7735_IO_t st7735_pIO = {
-	lcd_init,
-	RT_NULL,
-	RT_NULL,
-	lcd_writereg,
-	lcd_readreg,
-	lcd_senddata,
-	lcd_recvdata,
-	RT_NULL
+    lcd_init,
+    RT_NULL,
+    RT_NULL,
+    lcd_writereg,
+    lcd_readreg,
+    lcd_senddata,
+    lcd_recvdata,
+    RT_NULL
 };
 ST7735_Object_t st7735_pObj;
 uint32_t st7735_id;
@@ -81,63 +81,63 @@ void LCD_ShowChar(uint16_t x,uint16_t y,uint8_t num,uint8_t size,uint8_t mode)
     num=num-' ';//得到偏移后的值
     count = 0;
 
-	if(!mode) //非叠加方式
-	{
-		for(t=0;t<size;t++)
-		{
-			if(size==12)temp=asc2_1206[num][t];  //调用1206字体
-			else temp=asc2_1608[num][t];		 //调用1608字体
-
-			for(t1=0;t1<8;t1++)
-			{
-				if(temp&0x80)
-					write[count][t/2]=(BRUSH_POINT_COLOR&0xFF)<<8|BRUSH_POINT_COLOR>>8;
-				else
-					write[count][t/2]=(BRUSH_BACK_COLOR&0xFF)<<8|BRUSH_BACK_COLOR>>8;
-
-				count ++;
-				if(count >= size) count =0;
-
-				temp<<=1;
-				y++;
-				if(y>=h){return;}//超区域了
-				if((y-y0)==size)
-				{
-					y=y0;
-					x++;
-					if(x>=w){return;}//超区域了
-					break;
-				}
-			}
-		}
-	}
-	else//叠加方式
-	{
-		for(t=0;t<size;t++)
-		{
-			if(size==12)temp=asc2_1206[num][t];  //调用1206字体
-			else temp=asc2_1608[num][t];		 //调用1608字体
-			for(t1=0;t1<8;t1++)
-			{
-				if(temp&0x80)
-					write[count][t/2]=(BRUSH_POINT_COLOR&0xFF)<<8|BRUSH_POINT_COLOR>>8;
-				count ++;
-				if(count >= size) count =0;
-
-				temp<<=1;
-				y++;
-				if(y>=h){return;}//超区域了
-				if((y-y0)==size)
-				{
-					y=y0;
-					x++;
-					if(x>=w){return;}//超区域了
-					break;
-				}
-			}
-		}
-	}
-	ST7735_FillRGBRect(&st7735_pObj,x0,y0,(uint8_t *)&write,size==12?6:8,size);
+    if(!mode) //非叠加方式
+    {
+        for(t=0;t<size;t++)
+        {
+            if(size==12)temp=asc2_1206[num][t];  //调用1206字体
+            else temp=asc2_1608[num][t];         //调用1608字体
+
+            for(t1=0;t1<8;t1++)
+            {
+                if(temp&0x80)
+                    write[count][t/2]=(BRUSH_POINT_COLOR&0xFF)<<8|BRUSH_POINT_COLOR>>8;
+                else
+                    write[count][t/2]=(BRUSH_BACK_COLOR&0xFF)<<8|BRUSH_BACK_COLOR>>8;
+
+                count ++;
+                if(count >= size) count =0;
+
+                temp<<=1;
+                y++;
+                if(y>=h){return;}//超区域了
+                if((y-y0)==size)
+                {
+                    y=y0;
+                    x++;
+                    if(x>=w){return;}//超区域了
+                    break;
+                }
+            }
+        }
+    }
+    else//叠加方式
+    {
+        for(t=0;t<size;t++)
+        {
+            if(size==12)temp=asc2_1206[num][t];  //调用1206字体
+            else temp=asc2_1608[num][t];         //调用1608字体
+            for(t1=0;t1<8;t1++)
+            {
+                if(temp&0x80)
+                    write[count][t/2]=(BRUSH_POINT_COLOR&0xFF)<<8|BRUSH_POINT_COLOR>>8;
+                count ++;
+                if(count >= size) count =0;
+
+                temp<<=1;
+                y++;
+                if(y>=h){return;}//超区域了
+                if((y-y0)==size)
+                {
+                    y=y0;
+                    x++;
+                    if(x>=w){return;}//超区域了
+                    break;
+                }
+            }
+        }
+    }
+    ST7735_FillRGBRect(&st7735_pObj,x0,y0,(uint8_t *)&write,size==12?6:8,size);
 }
 
 //显示字符串
@@ -147,9 +147,9 @@ void LCD_ShowChar(uint16_t x,uint16_t y,uint8_t num,uint8_t size,uint8_t mode)
 //*p:字符串起始地址
 void LCD_ShowString(uint16_t x,uint16_t y,uint16_t width,uint16_t height,uint8_t size,uint8_t *p)
 {
-	uint8_t x0=x;
-	width+=x;
-	height+=y;
+    uint8_t x0=x;
+    width+=x;
+    height+=y;
     while((*p<='~')&&(*p>=' '))//判断是不是非法字符!
     {
         if(x>=width){x=x0;y+=size;}
@@ -167,58 +167,58 @@ void LCD_FillRGBRect(uint32_t Xpos, uint32_t Ypos, uint8_t *pData, uint32_t Widt
 
 static int32_t lcd_init(void)
 {
-	return ST7735_OK;
+    return ST7735_OK;
 }
 
 static int32_t lcd_writereg(uint8_t reg,uint8_t* pdata,uint32_t length)
 {
     int32_t result;
-	LCD_CS_RESET;
-	LCD_RS_RESET;
+    LCD_CS_RESET;
+    LCD_RS_RESET;
     result = rt_spi_send(spi_dev_lcd, &reg, 1);
-	LCD_RS_SET;
-	if(length > 0)
+    LCD_RS_SET;
+    if(length > 0)
         result += rt_spi_send(spi_dev_lcd, pdata, length);
-	LCD_CS_SET;
+    LCD_CS_SET;
     return ((result == length+1)?0:-1);
 }
 
 static int32_t lcd_readreg(uint8_t reg,uint8_t* pdata)
 {
     int32_t result;
-	LCD_CS_RESET;
-	LCD_RS_RESET;
+    LCD_CS_RESET;
+    LCD_RS_RESET;
 
-	result = rt_spi_send(spi_dev_lcd, &reg, 1);
-	LCD_RS_SET;
-	result += rt_spi_recv(spi_dev_lcd, pdata, 1);
-	LCD_CS_SET;
+    result = rt_spi_send(spi_dev_lcd, &reg, 1);
+    LCD_RS_SET;
+    result += rt_spi_recv(spi_dev_lcd, pdata, 1);
+    LCD_CS_SET;
     return ((result == 2)?0:-1);
 }
 
 static int32_t lcd_senddata(uint8_t* pdata,uint32_t length)
 {
     int32_t result;
-	LCD_CS_RESET;
-	//LCD_RS_SET;
-	result =rt_spi_send(spi_dev_lcd, pdata, length);
-	LCD_CS_SET;
+    LCD_CS_RESET;
+    //LCD_RS_SET;
+    result =rt_spi_send(spi_dev_lcd, pdata, length);
+    LCD_CS_SET;
     return ((result == length)?0:-1);
 }
 
 static int32_t lcd_recvdata(uint8_t* pdata,uint32_t length)
 {
     int32_t result;
-	LCD_CS_RESET;
-	//LCD_RS_SET;
-	result = rt_spi_recv(spi_dev_lcd, pdata, length);
-	LCD_CS_SET;
+    LCD_CS_RESET;
+    //LCD_RS_SET;
+    result = rt_spi_recv(spi_dev_lcd, pdata, length);
+    LCD_CS_SET;
     return ((result == length)?0:-1);
 }
 
 static int LCD_Init(void)
 {
-	rt_pin_mode(WR_RS_PIN, PIN_MODE_OUTPUT);
+    rt_pin_mode(WR_RS_PIN, PIN_MODE_OUTPUT);
     rt_pin_mode(CS_PIN, PIN_MODE_OUTPUT);
 
     spi_dev_lcd = (struct rt_spi_device *)rt_device_find(LCD_SPI_DEVICE_NAME);
@@ -229,13 +229,13 @@ static int LCD_Init(void)
     }
 
     ST7735_RegisterBusIO(&st7735_pObj,&st7735_pIO);
-	if(ST7735_ERROR == ST7735_LCD_Driver.Init(&st7735_pObj,ST7735_FORMAT_RBG565,ST7735_ORIENTATION_LANDSCAPE_ROT180))
+    if(ST7735_ERROR == ST7735_LCD_Driver.Init(&st7735_pObj,ST7735_FORMAT_RBG565,ST7735_ORIENTATION_LANDSCAPE_ROT180))
     {
         LOG_E("st7735 init failed!");
         // return ;
     }
     ST7735_LCD_Driver.FillRect(&st7735_pObj,0,0,160,80,BLACK);
-	ST7735_LCD_Driver.ReadID(&st7735_pObj,&st7735_id);
+    ST7735_LCD_Driver.ReadID(&st7735_pObj,&st7735_id);
     ST7735_LCD_Driver.DisplayOn(&st7735_pObj);
     LOG_D("lcd id:0X%08X", st7735_id);
     LOG_D("chip id:0X%08X", HAL_GetDEVID());
@@ -263,21 +263,21 @@ INIT_COMPONENT_EXPORT(LCD_Init);
 #ifdef FINSH_USING_MSH
 static int show_logo(int argc, char **argv)
 {
-	uint8_t text[20];
+    uint8_t text[20];
 
     LCD_SetBrightness(MAX_BRIGHTNESS);
 
-	ST7735_LCD_Driver.DrawBitmap(&st7735_pObj,0,0,WeActStudiologo);
+    ST7735_LCD_Driver.DrawBitmap(&st7735_pObj,0,0,WeActStudiologo);
     rt_thread_mdelay(1000);
 
-	ST7735_LCD_Driver.FillRect(&st7735_pObj,0,0,160,80,BLACK);
+    ST7735_LCD_Driver.FillRect(&st7735_pObj,0,0,160,80,BLACK);
 
-	sprintf((char *)&text,"WeAct Studio");
-	LCD_ShowString(4,4,160,16,16,text);
-	sprintf((char *)&text,"STM32H7xx 0x%X",HAL_GetDEVID());
-	LCD_ShowString(4,22,160,16,16,text);
-	sprintf((char *)&text,"LCD ID: 0x%X",st7735_id);
-	LCD_ShowString(4,40,160,16,16,text);
+    sprintf((char *)&text,"WeAct Studio");
+    LCD_ShowString(4,4,160,16,16,text);
+    sprintf((char *)&text,"STM32H7xx 0x%X",HAL_GetDEVID());
+    LCD_ShowString(4,22,160,16,16,text);
+    sprintf((char *)&text,"LCD ID: 0x%X",st7735_id);
+    LCD_ShowString(4,40,160,16,16,text);
     return 0;
 }
 MSH_CMD_EXPORT(show_logo, show logo);

bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/st7735/lcd.h

@@ -7,23 +7,23 @@
 #include "st7735.h"
 #include <stdio.h>
 
-#define WHITE         	 0xFFFF
-#define BLACK         	 0x0000
-#define BLUE         	 0x001F
+#define WHITE            0xFFFF
+#define BLACK            0x0000
+#define BLUE             0x001F
 #define BRED             0XF81F
-#define GRED 			 0XFFE0
-#define GBLUE			 0X07FF
-#define RED           	 0xF800
-#define MAGENTA       	 0xF81F
-#define GREEN         	 0x07E0
-#define CYAN          	 0x7FFF
-#define YELLOW        	 0xFFE0
-#define BROWN 			 0XBC40 //棕色
-#define BRRED 			 0XFC07 //棕红色
-#define GRAY  			 0X8430 //灰色
-#define DARKBLUE      	 0X01CF	//深蓝色
-#define LIGHTBLUE      	 0X7D7C	//浅蓝色
-#define GRAYBLUE       	 0X5458 //灰蓝色
+#define GRED             0XFFE0
+#define GBLUE            0X07FF
+#define RED              0xF800
+#define MAGENTA          0xF81F
+#define GREEN            0x07E0
+#define CYAN             0x7FFF
+#define YELLOW           0xFFE0
+#define BROWN            0XBC40 //棕色
+#define BRRED            0XFC07 //棕红色
+#define GRAY             0X8430 //灰色
+#define DARKBLUE         0X01CF //深蓝色
+#define LIGHTBLUE        0X7D7C //浅蓝色
+#define GRAYBLUE         0X5458 //灰蓝色
 
 // lcd spi
 #define LCD_SPI_DEVICE_NAME     "spi40"

bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/st7735/st7735.c

@@ -89,9 +89,9 @@ ST7735_LCD_Drv_t   ST7735_LCD_Driver =
 static uint32_t OrientationTab[4][2] =
 {
   {0x48U , 0xC8U}, /* Portrait orientation choice of LCD screen               */
-  {0x88U , 0x08U}, /* Portrait rotated 180° orientation choice of LCD screen  */
+  {0x88U , 0x08U}, /* Portrait rotated 180° orientation choice of LCD screen  */
   {0x28U , 0x68U}, /* Landscape orientation choice of LCD screen              */
-  {0xE8U , 0xA8U}  /* Landscape rotated 180° orientation choice of LCD screen */
+  {0xE8U , 0xA8U}  /* Landscape rotated 180° orientation choice of LCD screen */
 };
 
 static ST7735_Ctx_t ST7735Ctx;
@@ -177,16 +177,16 @@ int32_t ST7735_Init(ST7735_Object_t *pObj, uint32_t ColorCoding, uint32_t Orient
   }
   else
   {
-		/* Out of sleep mode, 0 args, delay 120ms */
+        /* Out of sleep mode, 0 args, delay 120ms */
     tmp = 0x00U;
     ret = st7735_write_reg(&pObj->Ctx, ST7735_SW_RESET, &tmp, 0);
-		(void)ST7735_IO_Delay(pObj, 120);
+        (void)ST7735_IO_Delay(pObj, 120);
 
     /* Out of sleep mode, 0 args, no delay */
     tmp = 0x00U;
     ret += st7735_write_reg(&pObj->Ctx, ST7735_SLEEP_OUT, &tmp, 1);
 
-		/* Frame rate ctrl - normal mode, 3 args:Rate = fosc/(1x2+40) * (LINE+2C+2D)*/
+        /* Frame rate ctrl - normal mode, 3 args:Rate = fosc/(1x2+40) * (LINE+2C+2D)*/
     ret += st7735_write_reg(&pObj->Ctx, ST7735_FRAME_RATE_CTRL1, &tmp, 0);
     tmp = 0x01U;
     ret += st7735_send_data(&pObj->Ctx, &tmp, 1);
@@ -384,7 +384,7 @@ int32_t ST7735_ReadID(ST7735_Object_t *pObj, uint32_t *Id)
   {
     ret = ST7735_ERROR;
   }
-	else if(st7735_read_reg(&pObj->Ctx, ST7735_READ_ID3, &tmp[2]) != ST7735_OK)
+    else if(st7735_read_reg(&pObj->Ctx, ST7735_READ_ID3, &tmp[2]) != ST7735_OK)
   {
     ret = ST7735_ERROR;
   }
@@ -392,7 +392,7 @@ int32_t ST7735_ReadID(ST7735_Object_t *pObj, uint32_t *Id)
   {
 
     *Id = ((uint32_t)tmp[2])<<0| ((uint32_t)tmp[1])<<8 | ((uint32_t)tmp[0])<<16;
-		//*Id = __rbit(*Id);
+        //*Id = __rbit(*Id);
     ret = ST7735_OK;
   }
 
@@ -501,7 +501,7 @@ int32_t ST7735_SetOrientation(ST7735_Object_t *pObj, uint32_t Orientation)
     ST7735Ctx.Width  = ST7735_HEIGHT;
     ST7735Ctx.Height = ST7735_WIDTH;
   }
-	ST7735Ctx.Orientation = Orientation;
+    ST7735Ctx.Orientation = Orientation;
 
   ret = ST7735_SetDisplayWindow(pObj, 0U, 0U, ST7735Ctx.Width, ST7735Ctx.Height);
 
@@ -545,27 +545,27 @@ int32_t ST7735_SetCursor(ST7735_Object_t *pObj, uint32_t Xpos, uint32_t Ypos)
   int32_t ret;
   uint8_t tmp;
 
-	/* Cursor calibration */
-	if(ST7735Ctx.Orientation <= ST7735_ORIENTATION_PORTRAIT_ROT180)
-	{
+    /* Cursor calibration */
+    if(ST7735Ctx.Orientation <= ST7735_ORIENTATION_PORTRAIT_ROT180)
+    {
 #if IS_BOE_PANEL
-		Xpos += 24;
-		Ypos += 0;
+        Xpos += 24;
+        Ypos += 0;
 #else
-		Xpos += 26;
-		Ypos += 1;
+        Xpos += 26;
+        Ypos += 1;
 #endif
-	}
-	else
-	{
+    }
+    else
+    {
 #if IS_BOE_PANEL
-		Xpos += 0;
-		Ypos += 24;
+        Xpos += 0;
+        Ypos += 24;
 #else
-		Xpos += 1;
-		Ypos += 26;
+        Xpos += 1;
+        Ypos += 26;
 #endif
-	}
+    }
 
   ret = st7735_write_reg(&pObj->Ctx, ST7735_CASET, &tmp, 0);
   tmp = (uint8_t)(Xpos >> 8U);
@@ -949,27 +949,27 @@ static int32_t ST7735_SetDisplayWindow(ST7735_Object_t *pObj, uint32_t Xpos, uin
   int32_t ret;
   uint8_t tmp;
 
-	/* Cursor calibration */
-	if(ST7735Ctx.Orientation <= ST7735_ORIENTATION_PORTRAIT_ROT180)
-	{
+    /* Cursor calibration */
+    if(ST7735Ctx.Orientation <= ST7735_ORIENTATION_PORTRAIT_ROT180)
+    {
 #if IS_BOE_PANEL
-		Xpos += 24;
-		Ypos += 0;
+        Xpos += 24;
+        Ypos += 0;
 #else
-		Xpos += 26;
-		Ypos += 1;
+        Xpos += 26;
+        Ypos += 1;
 #endif
-	}
-	else
-	{
+    }
+    else
+    {
 #if IS_BOE_PANEL
-		Xpos += 0;
-		Ypos += 24;
+        Xpos += 0;
+        Ypos += 24;
 #else
-		Xpos += 1;
-		Ypos += 26;
+        Xpos += 1;
+        Ypos += 26;
 #endif
-	}
+    }
 
   /* Column addr set, 4 args, no delay: XSTART = Xpos, XEND = (Xpos + Width - 1) */
   ret = st7735_write_reg(&pObj->Ctx, ST7735_CASET, &tmp, 0);

bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/st7735/st7735.h

@@ -24,7 +24,7 @@
 
 #ifdef __cplusplus
  extern "C" {
-#endif 
+#endif
 
 /* Includes ------------------------------------------------------------------*/
 #include "st7735_reg.h"
@@ -32,12 +32,12 @@
 
 /** @addtogroup BSP
   * @{
-  */ 
+  */
 
 /** @addtogroup Components
   * @{
-  */ 
-  
+  */
+
 /** @defgroup ST7735 ST7735
   * @{
   */
@@ -58,19 +58,19 @@ typedef struct
 {
   ST7735_Init_Func          Init;
   ST7735_DeInit_Func        DeInit;
-  uint16_t                  Address;  
+  uint16_t                  Address;
   ST7735_WriteReg_Func      WriteReg;
   ST7735_ReadReg_Func       ReadReg;
   ST7735_SendData_Func      SendData;
   ST7735_RecvData_Func      RecvData;
-  ST7735_GetTick_Func       GetTick; 
+  ST7735_GetTick_Func       GetTick;
 } ST7735_IO_t;
 
- 
+
 typedef struct
 {
   ST7735_IO_t         IO;
-  st7735_ctx_t        Ctx;   
+  st7735_ctx_t        Ctx;
   uint8_t             IsInitialized;
 } ST7735_Object_t;
 
@@ -82,15 +82,15 @@ typedef struct
   int32_t (*ReadID           )(ST7735_Object_t*, uint32_t*);
   int32_t (*DisplayOn        )(ST7735_Object_t*);
   int32_t (*DisplayOff       )(ST7735_Object_t*);
-  int32_t (*SetBrightness    )(ST7735_Object_t*, uint32_t); 
-  int32_t (*GetBrightness    )(ST7735_Object_t*, uint32_t*);   
+  int32_t (*SetBrightness    )(ST7735_Object_t*, uint32_t);
+  int32_t (*GetBrightness    )(ST7735_Object_t*, uint32_t*);
   int32_t (*SetOrientation   )(ST7735_Object_t*, uint32_t);
   int32_t (*GetOrientation   )(ST7735_Object_t*, uint32_t*);
 
   /* Drawing functions*/
-  int32_t ( *SetCursor       ) (ST7735_Object_t*, uint32_t, uint32_t); 
+  int32_t ( *SetCursor       ) (ST7735_Object_t*, uint32_t, uint32_t);
   int32_t ( *DrawBitmap      ) (ST7735_Object_t*, uint32_t, uint32_t, uint8_t *);
-  int32_t ( *FillRGBRect     ) (ST7735_Object_t*, uint32_t, uint32_t, uint8_t*, uint32_t, uint32_t);    
+  int32_t ( *FillRGBRect     ) (ST7735_Object_t*, uint32_t, uint32_t, uint8_t*, uint32_t, uint32_t);
   int32_t ( *DrawHLine       ) (ST7735_Object_t*, uint32_t, uint32_t, uint32_t, uint32_t);
   int32_t ( *DrawVLine       ) (ST7735_Object_t*, uint32_t, uint32_t, uint32_t, uint32_t);
   int32_t ( *FillRect        ) (ST7735_Object_t*, uint32_t, uint32_t, uint32_t, uint32_t, uint32_t);
@@ -98,31 +98,31 @@ typedef struct
   int32_t ( *SetPixel        ) (ST7735_Object_t*, uint32_t, uint32_t, uint32_t);
   int32_t ( *GetXSize        ) (ST7735_Object_t*, uint32_t *);
   int32_t ( *GetYSize        ) (ST7735_Object_t*, uint32_t *);
-  
+
 }ST7735_LCD_Drv_t;
-  
+
 /**
   * @}
-  */ 
+  */
 
 /** @defgroup ST7735_Exported_Constants Exported Constants
   * @{
   */
 
-/** 
-  * @brief  ST7735 Size  
-  */  
+/**
+  * @brief  ST7735 Size
+  */
 #define ST7735_OK                (0)
 #define ST7735_ERROR             (-1)
 
-/** 
-  * @brief  ST7735 ID  
-  */  
+/**
+  * @brief  ST7735 ID
+  */
 #define  ST7735_ID              0x5CU
-  
-/** 
-  * @brief  ST7735 Size  
-  */  
+
+/**
+  * @brief  ST7735 Size
+  */
 #define  ST7735_WIDTH           80U
 #define  ST7735_HEIGHT          160U
 
@@ -131,24 +131,24 @@ typedef struct
  *  Possible values of Display Orientation
  */
 #define ST7735_ORIENTATION_PORTRAIT         0x00U /* Portrait orientation choice of LCD screen               */
-#define ST7735_ORIENTATION_PORTRAIT_ROT180  0x01U /* Portrait rotated 180° orientation choice of LCD screen  */
+#define ST7735_ORIENTATION_PORTRAIT_ROT180  0x01U /* Portrait rotated 180° orientation choice of LCD screen  */
 #define ST7735_ORIENTATION_LANDSCAPE        0x02U /* Landscape orientation choice of LCD screen              */
-#define ST7735_ORIENTATION_LANDSCAPE_ROT180 0x03U /* Landscape rotated 180° orientation choice of LCD screen */
+#define ST7735_ORIENTATION_LANDSCAPE_ROT180 0x03U /* Landscape rotated 180° orientation choice of LCD screen */
 
 /**
- *  @brief  Possible values of pixel data format (ie color coding) 
+ *  @brief  Possible values of pixel data format (ie color coding)
  */
-#define ST7735_FORMAT_RBG444                0x03U /* Pixel format chosen is RGB444 : 12 bpp */   
+#define ST7735_FORMAT_RBG444                0x03U /* Pixel format chosen is RGB444 : 12 bpp */
 #define ST7735_FORMAT_RBG565                0x05U /* Pixel format chosen is RGB565 : 16 bpp */
 #define ST7735_FORMAT_RBG666                0x06U /* Pixel format chosen is RGB666 : 18 bpp */
 #define ST7735_FORMAT_DEFAULT               ST7735_FORMAT_RBG565
 /**
   * @}
   */
-  
+
 /** @defgroup ST7735_Exported_Functions Exported Functions
   * @{
-  */ 
+  */
 int32_t ST7735_RegisterBusIO (ST7735_Object_t *pObj, ST7735_IO_t *pIO);
 int32_t ST7735_Init(ST7735_Object_t *pObj, uint32_t ColorCoding, uint32_t Orientation);
 int32_t ST7735_DeInit(ST7735_Object_t *pObj);
@@ -175,8 +175,8 @@ extern ST7735_LCD_Drv_t   ST7735_LCD_Driver;
 
 /**
   * @}
-  */ 
-      
+  */
+
 #ifdef __cplusplus
 }
 #endif
@@ -185,14 +185,14 @@ extern ST7735_LCD_Drv_t   ST7735_LCD_Driver;
 
 /**
   * @}
-  */ 
+  */
 
 /**
   * @}
-  */ 
+  */
 
 /**
   * @}
   */
-  
+
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/st7735/st7735_reg.c

@@ -22,19 +22,19 @@
 
 /** @addtogroup BSP
   * @{
-  */ 
+  */
 
 /** @addtogroup Components
   * @{
-  */ 
-  
+  */
+
 /** @addtogroup ST7735_REG
   * @{
   */
- 
+
 /** @addtogroup ST7735_REG_Exported_Functions
   * @{
-  */   
+  */
 
 /**
   * @brief  Read ST7735 register
@@ -87,18 +87,18 @@ int32_t st7735_recv_data(st7735_ctx_t *ctx, uint8_t *pdata, uint32_t length)
 
 /**
   * @}
-  */ 
+  */
 
 /**
   * @}
-  */ 
-  
+  */
+
 /**
   * @}
-  */ 
+  */
 
 /**
   * @}
   */
-  
+
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32h750-weact-ministm32h7xx/board/port/st7735/st7735_reg.h

@@ -24,19 +24,19 @@
 
 #ifdef __cplusplus
  extern "C" {
-#endif 
+#endif
 
 /* Includes ------------------------------------------------------------------*/
 #include <stdint.h>
 
 /** @addtogroup BSP
   * @{
-  */ 
+  */
 
 /** @addtogroup Components
   * @{
-  */ 
-  
+  */
+
 /** @defgroup ST7735_REG ST7735 Registers
   * @{
   */
@@ -44,9 +44,9 @@
 /** @defgroup ST7735_REG_Exported_Constants Exported Constants
   * @{
   */
- 
-/** 
-  * @brief  ST7735 Registers  
+
+/**
+  * @brief  ST7735 Registers
   */
 #define ST7735_NOP                          0x00U  /* No Operation: NOP                           */
 #define ST7735_SW_RESET                     0x01U  /* Software reset: SWRESET                     */
@@ -54,49 +54,49 @@
 #define ST7735_READ_STATUS                  0x09U  /* Read Display Statu: RDDST                   */
 #define ST7735_READ_POWER_MODE              0x0AU  /* Read Display Power: RDDPM                   */
 #define ST7735_READ_MADCTL                  0x0BU  /* Read Display: RDDMADCTL                     */
-#define ST7735_READ_PIXEL_FORMAT            0x0CU  /* Read Display Pixel: RDDCOLMOD               */  
+#define ST7735_READ_PIXEL_FORMAT            0x0CU  /* Read Display Pixel: RDDCOLMOD               */
 #define ST7735_READ_IMAGE_MODE              0x0DU  /* Read Display Image: RDDIM                   */
-#define ST7735_READ_SIGNAL_MODE             0x0EU  /* Read Display Signal: RDDSM                  */           
-#define ST7735_SLEEP_IN                     0x10U  /* Sleep in & booster off: SLPIN               */ 
+#define ST7735_READ_SIGNAL_MODE             0x0EU  /* Read Display Signal: RDDSM                  */
+#define ST7735_SLEEP_IN                     0x10U  /* Sleep in & booster off: SLPIN               */
 #define ST7735_SLEEP_OUT                    0x11U  /* Sleep out & booster on: SLPOUT              */
-#define ST7735_PARTIAL_DISPLAY_ON           0x12U  /* Partial mode on: PTLON                      */ 
+#define ST7735_PARTIAL_DISPLAY_ON           0x12U  /* Partial mode on: PTLON                      */
 #define ST7735_NORMAL_DISPLAY_OFF           0x13U  /* Partial off (Normal): NORON                 */
 #define ST7735_DISPLAY_INVERSION_OFF        0x20U  /* Display inversion off: INVOFF               */
 #define ST7735_DISPLAY_INVERSION_ON         0x21U  /* Display inversion on: INVON                 */
 #define ST7735_GAMMA_SET                    0x26U  /* Gamma curve select: GAMSET                  */
 #define ST7735_DISPLAY_OFF                  0x28U  /* Display off: DISPOFF                        */
 #define ST7735_DISPLAY_ON                   0x29U  /* Display on: DISPON                          */
-#define ST7735_CASET                        0x2AU  /* Column address set: CASET                   */ 
+#define ST7735_CASET                        0x2AU  /* Column address set: CASET                   */
 #define ST7735_RASET                        0x2BU  /* Row address set: RASET                      */
-#define ST7735_WRITE_RAM                    0x2CU  /* Memory write: RAMWR                         */  
+#define ST7735_WRITE_RAM                    0x2CU  /* Memory write: RAMWR                         */
 #define ST7735_RGBSET                       0x2DU  /* LUT for 4k,65k,262k color: RGBSET           */
 #define ST7735_READ_RAM                     0x2EU  /* Memory read: RAMRD                          */
-#define ST7735_PTLAR                        0x30U  /* Partial start/end address set: PTLAR        */ 
-#define ST7735_TE_LINE_OFF                  0x34U  /* Tearing effect line off: TEOFF              */ 
-#define ST7735_TE_LINE_ON                   0x35U  /* Tearing effect mode set & on: TEON          */ 
-#define ST7735_MADCTL                       0x36U  /* Memory data access control: MADCTL          */ 
-#define ST7735_IDLE_MODE_OFF                0x38U  /* Idle mode off: IDMOFF                       */ 
-#define ST7735_IDLE_MODE_ON                 0x39U  /* Idle mode on: IDMON                         */ 
+#define ST7735_PTLAR                        0x30U  /* Partial start/end address set: PTLAR        */
+#define ST7735_TE_LINE_OFF                  0x34U  /* Tearing effect line off: TEOFF              */
+#define ST7735_TE_LINE_ON                   0x35U  /* Tearing effect mode set & on: TEON          */
+#define ST7735_MADCTL                       0x36U  /* Memory data access control: MADCTL          */
+#define ST7735_IDLE_MODE_OFF                0x38U  /* Idle mode off: IDMOFF                       */
+#define ST7735_IDLE_MODE_ON                 0x39U  /* Idle mode on: IDMON                         */
 #define ST7735_COLOR_MODE                   0x3AU  /* Interface pixel format: COLMOD              */
 #define ST7735_FRAME_RATE_CTRL1             0xB1U  /* In normal mode (Full colors): FRMCTR1       */
-#define ST7735_FRAME_RATE_CTRL2             0xB2U  /* In Idle mode (8-colors): FRMCTR2            */   
+#define ST7735_FRAME_RATE_CTRL2             0xB2U  /* In Idle mode (8-colors): FRMCTR2            */
 #define ST7735_FRAME_RATE_CTRL3             0xB3U  /* In partial mode + Full colors: FRMCTR3      */
 #define ST7735_FRAME_INVERSION_CTRL         0xB4U  /* Display inversion control: INVCTR           */
 #define ST7735_DISPLAY_SETTING              0xB6U  /* Display function setting                    */
-#define ST7735_PWR_CTRL1                    0xC0U  /* Power control setting: PWCTR1               */ 
-#define ST7735_PWR_CTRL2                    0xC1U  /* Power control setting: PWCTR2               */ 
+#define ST7735_PWR_CTRL1                    0xC0U  /* Power control setting: PWCTR1               */
+#define ST7735_PWR_CTRL2                    0xC1U  /* Power control setting: PWCTR2               */
 #define ST7735_PWR_CTRL3                    0xC2U  /* In normal mode (Full colors): PWCTR3        */
-#define ST7735_PWR_CTRL4                    0xC3U  /* In Idle mode (8-colors): PWCTR4             */ 
+#define ST7735_PWR_CTRL4                    0xC3U  /* In Idle mode (8-colors): PWCTR4             */
 #define ST7735_PWR_CTRL5                    0xC4U  /* In partial mode + Full colors: PWCTR5       */
-#define ST7735_VCOMH_VCOML_CTRL1            0xC5U  /* VCOM control 1: VMCTR1                      */ 
-#define ST7735_VMOF_CTRL                    0xC7U  /* Set VCOM offset control: VMOFCTR            */ 
-#define ST7735_WRID2                        0xD1U  /* Set LCM version code: WRID2                 */ 
-#define ST7735_WRID3                        0xD2U  /* Customer Project code: WRID3                */ 
+#define ST7735_VCOMH_VCOML_CTRL1            0xC5U  /* VCOM control 1: VMCTR1                      */
+#define ST7735_VMOF_CTRL                    0xC7U  /* Set VCOM offset control: VMOFCTR            */
+#define ST7735_WRID2                        0xD1U  /* Set LCM version code: WRID2                 */
+#define ST7735_WRID3                        0xD2U  /* Customer Project code: WRID3                */
 #define ST7735_NV_CTRL1                     0xD9U  /* NVM control status: NVCTR1                  */
-#define ST7735_READ_ID1                     0xDAU  /* Read ID1: RDID1                             */ 
-#define ST7735_READ_ID2                     0xDBU  /* Read ID2: RDID2                             */ 
-#define ST7735_READ_ID3                     0xDCU  /* Read ID3: RDID3                             */ 
-#define ST7735_NV_CTRL2                     0xDEU  /* NVM Read Command: NVCTR2                    */ 
+#define ST7735_READ_ID1                     0xDAU  /* Read ID1: RDID1                             */
+#define ST7735_READ_ID2                     0xDBU  /* Read ID2: RDID2                             */
+#define ST7735_READ_ID3                     0xDCU  /* Read ID3: RDID3                             */
+#define ST7735_NV_CTRL2                     0xDEU  /* NVM Read Command: NVCTR2                    */
 #define ST7735_NV_CTRL3                     0xDFU  /* NVM Write Command: NVCTR3                   */
 #define ST7735_PV_GAMMA_CTRL                0xE0U  /* Set Gamma adjustment (+ polarity): GAMCTRP1 */
 #define ST7735_NV_GAMMA_CTRL                0xE1U  /* Set Gamma adjustment (- polarity): GAMCTRN1 */
@@ -107,10 +107,10 @@
 /**
   * @}
   */
-  
+
 /** @defgroup ST7735_REG_Exported_Types Exported Types
   * @{
-  */ 
+  */
 typedef int32_t (*ST7735_Write_Func)(void *, uint8_t, uint8_t*, uint32_t);
 typedef int32_t (*ST7735_Read_Func) (void *, uint8_t, uint8_t*);
 typedef int32_t (*ST7735_Send_Func) (void *, uint8_t*, uint32_t);
@@ -121,7 +121,7 @@ typedef struct
   ST7735_Write_Func   WriteReg;
   ST7735_Read_Func    ReadReg;
   ST7735_Send_Func    SendData;
-  ST7735_Recv_Func    RecvData;  
+  ST7735_Recv_Func    RecvData;
   void                *handle;
 } st7735_ctx_t;
 
@@ -131,7 +131,7 @@ typedef struct
 
 /** @defgroup ST7735_REG_Exported_Functions Exported Functions
   * @{
-  */ 
+  */
 int32_t st7735_write_reg(st7735_ctx_t *ctx, uint8_t reg, uint8_t *pdata, uint32_t length);
 int32_t st7735_read_reg(st7735_ctx_t *ctx, uint8_t reg, uint8_t *pdata);
 int32_t st7735_send_data(st7735_ctx_t *ctx, uint8_t *pdata, uint32_t length);
@@ -139,8 +139,8 @@ int32_t st7735_recv_data(st7735_ctx_t *ctx, uint8_t *pdata, uint32_t length);
 
 /**
   * @}
-  */ 
-      
+  */
+
 #ifdef __cplusplus
 }
 #endif
@@ -149,14 +149,14 @@ int32_t st7735_recv_data(st7735_ctx_t *ctx, uint8_t *pdata, uint32_t length);
 
 /**
   * @}
-  */ 
+  */
 
 /**
   * @}
-  */ 
+  */
 
 /**
   * @}
   */
-  
+
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/