|
|
@@ -0,0 +1,934 @@
|
|
|
+/*-
|
|
|
+ * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
|
|
|
+ * The Regents of the University of California. All rights reserved.
|
|
|
+ *
|
|
|
+ * This code is derived from the Stanford/CMU enet packet filter,
|
|
|
+ * (net/enet.c) distributed as part of 4.3BSD, and code contributed
|
|
|
+ * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence
|
|
|
+ * Berkeley Laboratory.
|
|
|
+ *
|
|
|
+ * Redistribution and use in source and binary forms, with or without
|
|
|
+ * modification, are permitted provided that the following conditions
|
|
|
+ * are met:
|
|
|
+ * 1. Redistributions of source code must retain the above copyright
|
|
|
+ * notice, this list of conditions and the following disclaimer.
|
|
|
+ * 2. Redistributions in binary form must reproduce the above copyright
|
|
|
+ * notice, this list of conditions and the following disclaimer in the
|
|
|
+ * documentation and/or other materials provided with the distribution.
|
|
|
+ * 3. All advertising materials mentioning features or use of this software
|
|
|
+ * must display the following acknowledgement:
|
|
|
+ * This product includes software developed by the University of
|
|
|
+ * California, Berkeley and its contributors.
|
|
|
+ * 4. Neither the name of the University nor the names of its contributors
|
|
|
+ * may be used to endorse or promote products derived from this software
|
|
|
+ * without specific prior written permission.
|
|
|
+ *
|
|
|
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
|
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
|
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
+ * SUCH DAMAGE.
|
|
|
+ *
|
|
|
+ * @(#)bpf.h 7.1 (Berkeley) 5/7/91
|
|
|
+ *
|
|
|
+ * @(#) $Header: /tcpdump/master/libpcap/pcap/bpf.h,v 1.19.2.8 2008-09-22 20:16:01 guy Exp $ (LBL)
|
|
|
+ */
|
|
|
+
|
|
|
+/*
|
|
|
+ * This is libpcap's cut-down version of bpf.h; it includes only
|
|
|
+ * the stuff needed for the code generator and the userland BPF
|
|
|
+ * interpreter, and the libpcap APIs for setting filters, etc..
|
|
|
+ *
|
|
|
+ * "pcap-bpf.c" will include the native OS version, as it deals with
|
|
|
+ * the OS's BPF implementation.
|
|
|
+ *
|
|
|
+ * XXX - should this all just be moved to "pcap.h"?
|
|
|
+ */
|
|
|
+
|
|
|
+#ifndef BPF_MAJOR_VERSION
|
|
|
+
|
|
|
+#ifdef __cplusplus
|
|
|
+extern "C" {
|
|
|
+#endif
|
|
|
+
|
|
|
+/* BSD style release date */
|
|
|
+#define BPF_RELEASE 199606
|
|
|
+
|
|
|
+#ifdef MSDOS /* must be 32-bit */
|
|
|
+typedef long bpf_int32;
|
|
|
+typedef unsigned long bpf_u_int32;
|
|
|
+#else
|
|
|
+typedef int bpf_int32;
|
|
|
+typedef u_int bpf_u_int32;
|
|
|
+#endif
|
|
|
+
|
|
|
+/*
|
|
|
+ * Alignment macros. BPF_WORDALIGN rounds up to the next
|
|
|
+ * even multiple of BPF_ALIGNMENT.
|
|
|
+ */
|
|
|
+#ifndef __NetBSD__
|
|
|
+#define BPF_ALIGNMENT sizeof(bpf_int32)
|
|
|
+#else
|
|
|
+#define BPF_ALIGNMENT sizeof(long)
|
|
|
+#endif
|
|
|
+#define BPF_WORDALIGN(x) (((x)+(BPF_ALIGNMENT-1))&~(BPF_ALIGNMENT-1))
|
|
|
+
|
|
|
+#define BPF_MAXBUFSIZE 0x8000
|
|
|
+#define BPF_MINBUFSIZE 32
|
|
|
+
|
|
|
+/*
|
|
|
+ * Structure for "pcap_compile()", "pcap_setfilter()", etc..
|
|
|
+ */
|
|
|
+struct bpf_program {
|
|
|
+ u_int bf_len;
|
|
|
+ struct bpf_insn *bf_insns;
|
|
|
+};
|
|
|
+
|
|
|
+/*
|
|
|
+ * Struct return by BIOCVERSION. This represents the version number of
|
|
|
+ * the filter language described by the instruction encodings below.
|
|
|
+ * bpf understands a program iff kernel_major == filter_major &&
|
|
|
+ * kernel_minor >= filter_minor, that is, if the value returned by the
|
|
|
+ * running kernel has the same major number and a minor number equal
|
|
|
+ * equal to or less than the filter being downloaded. Otherwise, the
|
|
|
+ * results are undefined, meaning an error may be returned or packets
|
|
|
+ * may be accepted haphazardly.
|
|
|
+ * It has nothing to do with the source code version.
|
|
|
+ */
|
|
|
+struct bpf_version {
|
|
|
+ u_short bv_major;
|
|
|
+ u_short bv_minor;
|
|
|
+};
|
|
|
+/* Current version number of filter architecture. */
|
|
|
+#define BPF_MAJOR_VERSION 1
|
|
|
+#define BPF_MINOR_VERSION 1
|
|
|
+
|
|
|
+/*
|
|
|
+ * Data-link level type codes.
|
|
|
+ *
|
|
|
+ * Do *NOT* add new values to this list without asking
|
|
|
+ * "tcpdump-workers@lists.tcpdump.org" for a value. Otherwise, you run
|
|
|
+ * the risk of using a value that's already being used for some other
|
|
|
+ * purpose, and of having tools that read libpcap-format captures not
|
|
|
+ * being able to handle captures with your new DLT_ value, with no hope
|
|
|
+ * that they will ever be changed to do so (as that would destroy their
|
|
|
+ * ability to read captures using that value for that other purpose).
|
|
|
+ */
|
|
|
+
|
|
|
+/*
|
|
|
+ * These are the types that are the same on all platforms, and that
|
|
|
+ * have been defined by <net/bpf.h> for ages.
|
|
|
+ */
|
|
|
+#define DLT_NULL 0 /* BSD loopback encapsulation */
|
|
|
+#define DLT_EN10MB 1 /* Ethernet (10Mb) */
|
|
|
+#define DLT_EN3MB 2 /* Experimental Ethernet (3Mb) */
|
|
|
+#define DLT_AX25 3 /* Amateur Radio AX.25 */
|
|
|
+#define DLT_PRONET 4 /* Proteon ProNET Token Ring */
|
|
|
+#define DLT_CHAOS 5 /* Chaos */
|
|
|
+#define DLT_IEEE802 6 /* 802.5 Token Ring */
|
|
|
+#define DLT_ARCNET 7 /* ARCNET, with BSD-style header */
|
|
|
+#define DLT_SLIP 8 /* Serial Line IP */
|
|
|
+#define DLT_PPP 9 /* Point-to-point Protocol */
|
|
|
+#define DLT_FDDI 10 /* FDDI */
|
|
|
+
|
|
|
+/*
|
|
|
+ * These are types that are different on some platforms, and that
|
|
|
+ * have been defined by <net/bpf.h> for ages. We use #ifdefs to
|
|
|
+ * detect the BSDs that define them differently from the traditional
|
|
|
+ * libpcap <net/bpf.h>
|
|
|
+ *
|
|
|
+ * XXX - DLT_ATM_RFC1483 is 13 in BSD/OS, and DLT_RAW is 14 in BSD/OS,
|
|
|
+ * but I don't know what the right #define is for BSD/OS.
|
|
|
+ */
|
|
|
+#define DLT_ATM_RFC1483 11 /* LLC-encapsulated ATM */
|
|
|
+
|
|
|
+#ifdef __OpenBSD__
|
|
|
+#define DLT_RAW 14 /* raw IP */
|
|
|
+#else
|
|
|
+#define DLT_RAW 12 /* raw IP */
|
|
|
+#endif
|
|
|
+
|
|
|
+/*
|
|
|
+ * Given that the only OS that currently generates BSD/OS SLIP or PPP
|
|
|
+ * is, well, BSD/OS, arguably everybody should have chosen its values
|
|
|
+ * for DLT_SLIP_BSDOS and DLT_PPP_BSDOS, which are 15 and 16, but they
|
|
|
+ * didn't. So it goes.
|
|
|
+ */
|
|
|
+#if defined(__NetBSD__) || defined(__FreeBSD__)
|
|
|
+#ifndef DLT_SLIP_BSDOS
|
|
|
+#define DLT_SLIP_BSDOS 13 /* BSD/OS Serial Line IP */
|
|
|
+#define DLT_PPP_BSDOS 14 /* BSD/OS Point-to-point Protocol */
|
|
|
+#endif
|
|
|
+#else
|
|
|
+#define DLT_SLIP_BSDOS 15 /* BSD/OS Serial Line IP */
|
|
|
+#define DLT_PPP_BSDOS 16 /* BSD/OS Point-to-point Protocol */
|
|
|
+#endif
|
|
|
+
|
|
|
+/*
|
|
|
+ * 17 is used for DLT_OLD_PFLOG in OpenBSD;
|
|
|
+ * OBSOLETE: DLT_PFLOG is 117 in OpenBSD now as well. See below.
|
|
|
+ * 18 is used for DLT_PFSYNC in OpenBSD; don't use it for anything else.
|
|
|
+ */
|
|
|
+
|
|
|
+#define DLT_ATM_CLIP 19 /* Linux Classical-IP over ATM */
|
|
|
+
|
|
|
+/*
|
|
|
+ * Apparently Redback uses this for its SmartEdge 400/800. I hope
|
|
|
+ * nobody else decided to use it, too.
|
|
|
+ */
|
|
|
+#define DLT_REDBACK_SMARTEDGE 32
|
|
|
+
|
|
|
+/*
|
|
|
+ * These values are defined by NetBSD; other platforms should refrain from
|
|
|
+ * using them for other purposes, so that NetBSD savefiles with link
|
|
|
+ * types of 50 or 51 can be read as this type on all platforms.
|
|
|
+ */
|
|
|
+#define DLT_PPP_SERIAL 50 /* PPP over serial with HDLC encapsulation */
|
|
|
+#define DLT_PPP_ETHER 51 /* PPP over Ethernet */
|
|
|
+
|
|
|
+/*
|
|
|
+ * The Axent Raptor firewall - now the Symantec Enterprise Firewall - uses
|
|
|
+ * a link-layer type of 99 for the tcpdump it supplies. The link-layer
|
|
|
+ * header has 6 bytes of unknown data, something that appears to be an
|
|
|
+ * Ethernet type, and 36 bytes that appear to be 0 in at least one capture
|
|
|
+ * I've seen.
|
|
|
+ */
|
|
|
+#define DLT_SYMANTEC_FIREWALL 99
|
|
|
+
|
|
|
+/*
|
|
|
+ * Values between 100 and 103 are used in capture file headers as
|
|
|
+ * link-layer types corresponding to DLT_ types that differ
|
|
|
+ * between platforms; don't use those values for new DLT_ new types.
|
|
|
+ */
|
|
|
+
|
|
|
+/*
|
|
|
+ * This value was defined by libpcap 0.5; platforms that have defined
|
|
|
+ * it with a different value should define it here with that value -
|
|
|
+ * a link type of 104 in a save file will be mapped to DLT_C_HDLC,
|
|
|
+ * whatever value that happens to be, so programs will correctly
|
|
|
+ * handle files with that link type regardless of the value of
|
|
|
+ * DLT_C_HDLC.
|
|
|
+ *
|
|
|
+ * The name DLT_C_HDLC was used by BSD/OS; we use that name for source
|
|
|
+ * compatibility with programs written for BSD/OS.
|
|
|
+ *
|
|
|
+ * libpcap 0.5 defined it as DLT_CHDLC; we define DLT_CHDLC as well,
|
|
|
+ * for source compatibility with programs written for libpcap 0.5.
|
|
|
+ */
|
|
|
+#define DLT_C_HDLC 104 /* Cisco HDLC */
|
|
|
+#define DLT_CHDLC DLT_C_HDLC
|
|
|
+
|
|
|
+#define DLT_IEEE802_11 105 /* IEEE 802.11 wireless */
|
|
|
+
|
|
|
+/*
|
|
|
+ * 106 is reserved for Linux Classical IP over ATM; it's like DLT_RAW,
|
|
|
+ * except when it isn't. (I.e., sometimes it's just raw IP, and
|
|
|
+ * sometimes it isn't.) We currently handle it as DLT_LINUX_SLL,
|
|
|
+ * so that we don't have to worry about the link-layer header.)
|
|
|
+ */
|
|
|
+
|
|
|
+/*
|
|
|
+ * Frame Relay; BSD/OS has a DLT_FR with a value of 11, but that collides
|
|
|
+ * with other values.
|
|
|
+ * DLT_FR and DLT_FRELAY packets start with the Q.922 Frame Relay header
|
|
|
+ * (DLCI, etc.).
|
|
|
+ */
|
|
|
+#define DLT_FRELAY 107
|
|
|
+
|
|
|
+/*
|
|
|
+ * OpenBSD DLT_LOOP, for loopback devices; it's like DLT_NULL, except
|
|
|
+ * that the AF_ type in the link-layer header is in network byte order.
|
|
|
+ *
|
|
|
+ * DLT_LOOP is 12 in OpenBSD, but that's DLT_RAW in other OSes, so
|
|
|
+ * we don't use 12 for it in OSes other than OpenBSD.
|
|
|
+ */
|
|
|
+#ifdef __OpenBSD__
|
|
|
+#define DLT_LOOP 12
|
|
|
+#else
|
|
|
+#define DLT_LOOP 108
|
|
|
+#endif
|
|
|
+
|
|
|
+/*
|
|
|
+ * Encapsulated packets for IPsec; DLT_ENC is 13 in OpenBSD, but that's
|
|
|
+ * DLT_SLIP_BSDOS in NetBSD, so we don't use 13 for it in OSes other
|
|
|
+ * than OpenBSD.
|
|
|
+ */
|
|
|
+#ifdef __OpenBSD__
|
|
|
+#define DLT_ENC 13
|
|
|
+#else
|
|
|
+#define DLT_ENC 109
|
|
|
+#endif
|
|
|
+
|
|
|
+/*
|
|
|
+ * Values between 110 and 112 are reserved for use in capture file headers
|
|
|
+ * as link-layer types corresponding to DLT_ types that might differ
|
|
|
+ * between platforms; don't use those values for new DLT_ types
|
|
|
+ * other than the corresponding DLT_ types.
|
|
|
+ */
|
|
|
+
|
|
|
+/*
|
|
|
+ * This is for Linux cooked sockets.
|
|
|
+ */
|
|
|
+#define DLT_LINUX_SLL 113
|
|
|
+
|
|
|
+/*
|
|
|
+ * Apple LocalTalk hardware.
|
|
|
+ */
|
|
|
+#define DLT_LTALK 114
|
|
|
+
|
|
|
+/*
|
|
|
+ * Acorn Econet.
|
|
|
+ */
|
|
|
+#define DLT_ECONET 115
|
|
|
+
|
|
|
+/*
|
|
|
+ * Reserved for use with OpenBSD ipfilter.
|
|
|
+ */
|
|
|
+#define DLT_IPFILTER 116
|
|
|
+
|
|
|
+/*
|
|
|
+ * OpenBSD DLT_PFLOG; DLT_PFLOG is 17 in OpenBSD, but that's DLT_LANE8023
|
|
|
+ * in SuSE 6.3, so we can't use 17 for it in capture-file headers.
|
|
|
+ *
|
|
|
+ * XXX: is there a conflict with DLT_PFSYNC 18 as well?
|
|
|
+ */
|
|
|
+#ifdef __OpenBSD__
|
|
|
+#define DLT_OLD_PFLOG 17
|
|
|
+#define DLT_PFSYNC 18
|
|
|
+#endif
|
|
|
+#define DLT_PFLOG 117
|
|
|
+
|
|
|
+/*
|
|
|
+ * Registered for Cisco-internal use.
|
|
|
+ */
|
|
|
+#define DLT_CISCO_IOS 118
|
|
|
+
|
|
|
+/*
|
|
|
+ * For 802.11 cards using the Prism II chips, with a link-layer
|
|
|
+ * header including Prism monitor mode information plus an 802.11
|
|
|
+ * header.
|
|
|
+ */
|
|
|
+#define DLT_PRISM_HEADER 119
|
|
|
+
|
|
|
+/*
|
|
|
+ * Reserved for Aironet 802.11 cards, with an Aironet link-layer header
|
|
|
+ * (see Doug Ambrisko's FreeBSD patches).
|
|
|
+ */
|
|
|
+#define DLT_AIRONET_HEADER 120
|
|
|
+
|
|
|
+/*
|
|
|
+ * Reserved for Siemens HiPath HDLC.
|
|
|
+ */
|
|
|
+#define DLT_HHDLC 121
|
|
|
+
|
|
|
+/*
|
|
|
+ * This is for RFC 2625 IP-over-Fibre Channel.
|
|
|
+ *
|
|
|
+ * This is not for use with raw Fibre Channel, where the link-layer
|
|
|
+ * header starts with a Fibre Channel frame header; it's for IP-over-FC,
|
|
|
+ * where the link-layer header starts with an RFC 2625 Network_Header
|
|
|
+ * field.
|
|
|
+ */
|
|
|
+#define DLT_IP_OVER_FC 122
|
|
|
+
|
|
|
+/*
|
|
|
+ * This is for Full Frontal ATM on Solaris with SunATM, with a
|
|
|
+ * pseudo-header followed by an AALn PDU.
|
|
|
+ *
|
|
|
+ * There may be other forms of Full Frontal ATM on other OSes,
|
|
|
+ * with different pseudo-headers.
|
|
|
+ *
|
|
|
+ * If ATM software returns a pseudo-header with VPI/VCI information
|
|
|
+ * (and, ideally, packet type information, e.g. signalling, ILMI,
|
|
|
+ * LANE, LLC-multiplexed traffic, etc.), it should not use
|
|
|
+ * DLT_ATM_RFC1483, but should get a new DLT_ value, so tcpdump
|
|
|
+ * and the like don't have to infer the presence or absence of a
|
|
|
+ * pseudo-header and the form of the pseudo-header.
|
|
|
+ */
|
|
|
+#define DLT_SUNATM 123 /* Solaris+SunATM */
|
|
|
+
|
|
|
+/*
|
|
|
+ * Reserved as per request from Kent Dahlgren <kent@praesum.com>
|
|
|
+ * for private use.
|
|
|
+ */
|
|
|
+#define DLT_RIO 124 /* RapidIO */
|
|
|
+#define DLT_PCI_EXP 125 /* PCI Express */
|
|
|
+#define DLT_AURORA 126 /* Xilinx Aurora link layer */
|
|
|
+
|
|
|
+/*
|
|
|
+ * Header for 802.11 plus a number of bits of link-layer information
|
|
|
+ * including radio information, used by some recent BSD drivers as
|
|
|
+ * well as the madwifi Atheros driver for Linux.
|
|
|
+ */
|
|
|
+#define DLT_IEEE802_11_RADIO 127 /* 802.11 plus radiotap radio header */
|
|
|
+
|
|
|
+/*
|
|
|
+ * Reserved for the TZSP encapsulation, as per request from
|
|
|
+ * Chris Waters <chris.waters@networkchemistry.com>
|
|
|
+ * TZSP is a generic encapsulation for any other link type,
|
|
|
+ * which includes a means to include meta-information
|
|
|
+ * with the packet, e.g. signal strength and channel
|
|
|
+ * for 802.11 packets.
|
|
|
+ */
|
|
|
+#define DLT_TZSP 128 /* Tazmen Sniffer Protocol */
|
|
|
+
|
|
|
+/*
|
|
|
+ * BSD's ARCNET headers have the source host, destination host,
|
|
|
+ * and type at the beginning of the packet; that's what's handed
|
|
|
+ * up to userland via BPF.
|
|
|
+ *
|
|
|
+ * Linux's ARCNET headers, however, have a 2-byte offset field
|
|
|
+ * between the host IDs and the type; that's what's handed up
|
|
|
+ * to userland via PF_PACKET sockets.
|
|
|
+ *
|
|
|
+ * We therefore have to have separate DLT_ values for them.
|
|
|
+ */
|
|
|
+#define DLT_ARCNET_LINUX 129 /* ARCNET */
|
|
|
+
|
|
|
+/*
|
|
|
+ * Juniper-private data link types, as per request from
|
|
|
+ * Hannes Gredler <hannes@juniper.net>. The DLT_s are used
|
|
|
+ * for passing on chassis-internal metainformation such as
|
|
|
+ * QOS profiles, etc..
|
|
|
+ */
|
|
|
+#define DLT_JUNIPER_MLPPP 130
|
|
|
+#define DLT_JUNIPER_MLFR 131
|
|
|
+#define DLT_JUNIPER_ES 132
|
|
|
+#define DLT_JUNIPER_GGSN 133
|
|
|
+#define DLT_JUNIPER_MFR 134
|
|
|
+#define DLT_JUNIPER_ATM2 135
|
|
|
+#define DLT_JUNIPER_SERVICES 136
|
|
|
+#define DLT_JUNIPER_ATM1 137
|
|
|
+
|
|
|
+/*
|
|
|
+ * Apple IP-over-IEEE 1394, as per a request from Dieter Siegmund
|
|
|
+ * <dieter@apple.com>. The header that's presented is an Ethernet-like
|
|
|
+ * header:
|
|
|
+ *
|
|
|
+ * #define FIREWIRE_EUI64_LEN 8
|
|
|
+ * struct firewire_header {
|
|
|
+ * u_char firewire_dhost[FIREWIRE_EUI64_LEN];
|
|
|
+ * u_char firewire_shost[FIREWIRE_EUI64_LEN];
|
|
|
+ * u_short firewire_type;
|
|
|
+ * };
|
|
|
+ *
|
|
|
+ * with "firewire_type" being an Ethernet type value, rather than,
|
|
|
+ * for example, raw GASP frames being handed up.
|
|
|
+ */
|
|
|
+#define DLT_APPLE_IP_OVER_IEEE1394 138
|
|
|
+
|
|
|
+/*
|
|
|
+ * Various SS7 encapsulations, as per a request from Jeff Morriss
|
|
|
+ * <jeff.morriss[AT]ulticom.com> and subsequent discussions.
|
|
|
+ */
|
|
|
+#define DLT_MTP2_WITH_PHDR 139 /* pseudo-header with various info, followed by MTP2 */
|
|
|
+#define DLT_MTP2 140 /* MTP2, without pseudo-header */
|
|
|
+#define DLT_MTP3 141 /* MTP3, without pseudo-header or MTP2 */
|
|
|
+#define DLT_SCCP 142 /* SCCP, without pseudo-header or MTP2 or MTP3 */
|
|
|
+
|
|
|
+/*
|
|
|
+ * DOCSIS MAC frames.
|
|
|
+ */
|
|
|
+#define DLT_DOCSIS 143
|
|
|
+
|
|
|
+/*
|
|
|
+ * Linux-IrDA packets. Protocol defined at http://www.irda.org.
|
|
|
+ * Those packets include IrLAP headers and above (IrLMP...), but
|
|
|
+ * don't include Phy framing (SOF/EOF/CRC & byte stuffing), because Phy
|
|
|
+ * framing can be handled by the hardware and depend on the bitrate.
|
|
|
+ * This is exactly the format you would get capturing on a Linux-IrDA
|
|
|
+ * interface (irdaX), but not on a raw serial port.
|
|
|
+ * Note the capture is done in "Linux-cooked" mode, so each packet include
|
|
|
+ * a fake packet header (struct sll_header). This is because IrDA packet
|
|
|
+ * decoding is dependant on the direction of the packet (incomming or
|
|
|
+ * outgoing).
|
|
|
+ * When/if other platform implement IrDA capture, we may revisit the
|
|
|
+ * issue and define a real DLT_IRDA...
|
|
|
+ * Jean II
|
|
|
+ */
|
|
|
+#define DLT_LINUX_IRDA 144
|
|
|
+
|
|
|
+/*
|
|
|
+ * Reserved for IBM SP switch and IBM Next Federation switch.
|
|
|
+ */
|
|
|
+#define DLT_IBM_SP 145
|
|
|
+#define DLT_IBM_SN 146
|
|
|
+
|
|
|
+/*
|
|
|
+ * Reserved for private use. If you have some link-layer header type
|
|
|
+ * that you want to use within your organization, with the capture files
|
|
|
+ * using that link-layer header type not ever be sent outside your
|
|
|
+ * organization, you can use these values.
|
|
|
+ *
|
|
|
+ * No libpcap release will use these for any purpose, nor will any
|
|
|
+ * tcpdump release use them, either.
|
|
|
+ *
|
|
|
+ * Do *NOT* use these in capture files that you expect anybody not using
|
|
|
+ * your private versions of capture-file-reading tools to read; in
|
|
|
+ * particular, do *NOT* use them in products, otherwise you may find that
|
|
|
+ * people won't be able to use tcpdump, or snort, or Ethereal, or... to
|
|
|
+ * read capture files from your firewall/intrusion detection/traffic
|
|
|
+ * monitoring/etc. appliance, or whatever product uses that DLT_ value,
|
|
|
+ * and you may also find that the developers of those applications will
|
|
|
+ * not accept patches to let them read those files.
|
|
|
+ *
|
|
|
+ * Also, do not use them if somebody might send you a capture using them
|
|
|
+ * for *their* private type and tools using them for *your* private type
|
|
|
+ * would have to read them.
|
|
|
+ *
|
|
|
+ * Instead, ask "tcpdump-workers@lists.tcpdump.org" for a new DLT_ value,
|
|
|
+ * as per the comment above, and use the type you're given.
|
|
|
+ */
|
|
|
+#define DLT_USER0 147
|
|
|
+#define DLT_USER1 148
|
|
|
+#define DLT_USER2 149
|
|
|
+#define DLT_USER3 150
|
|
|
+#define DLT_USER4 151
|
|
|
+#define DLT_USER5 152
|
|
|
+#define DLT_USER6 153
|
|
|
+#define DLT_USER7 154
|
|
|
+#define DLT_USER8 155
|
|
|
+#define DLT_USER9 156
|
|
|
+#define DLT_USER10 157
|
|
|
+#define DLT_USER11 158
|
|
|
+#define DLT_USER12 159
|
|
|
+#define DLT_USER13 160
|
|
|
+#define DLT_USER14 161
|
|
|
+#define DLT_USER15 162
|
|
|
+
|
|
|
+/*
|
|
|
+ * For future use with 802.11 captures - defined by AbsoluteValue
|
|
|
+ * Systems to store a number of bits of link-layer information
|
|
|
+ * including radio information:
|
|
|
+ *
|
|
|
+ * http://www.shaftnet.org/~pizza/software/capturefrm.txt
|
|
|
+ *
|
|
|
+ * but it might be used by some non-AVS drivers now or in the
|
|
|
+ * future.
|
|
|
+ */
|
|
|
+#define DLT_IEEE802_11_RADIO_AVS 163 /* 802.11 plus AVS radio header */
|
|
|
+
|
|
|
+/*
|
|
|
+ * Juniper-private data link type, as per request from
|
|
|
+ * Hannes Gredler <hannes@juniper.net>. The DLT_s are used
|
|
|
+ * for passing on chassis-internal metainformation such as
|
|
|
+ * QOS profiles, etc..
|
|
|
+ */
|
|
|
+#define DLT_JUNIPER_MONITOR 164
|
|
|
+
|
|
|
+/*
|
|
|
+ * Reserved for BACnet MS/TP.
|
|
|
+ */
|
|
|
+#define DLT_BACNET_MS_TP 165
|
|
|
+
|
|
|
+/*
|
|
|
+ * Another PPP variant as per request from Karsten Keil <kkeil@suse.de>.
|
|
|
+ *
|
|
|
+ * This is used in some OSes to allow a kernel socket filter to distinguish
|
|
|
+ * between incoming and outgoing packets, on a socket intended to
|
|
|
+ * supply pppd with outgoing packets so it can do dial-on-demand and
|
|
|
+ * hangup-on-lack-of-demand; incoming packets are filtered out so they
|
|
|
+ * don't cause pppd to hold the connection up (you don't want random
|
|
|
+ * input packets such as port scans, packets from old lost connections,
|
|
|
+ * etc. to force the connection to stay up).
|
|
|
+ *
|
|
|
+ * The first byte of the PPP header (0xff03) is modified to accomodate
|
|
|
+ * the direction - 0x00 = IN, 0x01 = OUT.
|
|
|
+ */
|
|
|
+#define DLT_PPP_PPPD 166
|
|
|
+
|
|
|
+/*
|
|
|
+ * Names for backwards compatibility with older versions of some PPP
|
|
|
+ * software; new software should use DLT_PPP_PPPD.
|
|
|
+ */
|
|
|
+#define DLT_PPP_WITH_DIRECTION DLT_PPP_PPPD
|
|
|
+#define DLT_LINUX_PPP_WITHDIRECTION DLT_PPP_PPPD
|
|
|
+
|
|
|
+/*
|
|
|
+ * Juniper-private data link type, as per request from
|
|
|
+ * Hannes Gredler <hannes@juniper.net>. The DLT_s are used
|
|
|
+ * for passing on chassis-internal metainformation such as
|
|
|
+ * QOS profiles, cookies, etc..
|
|
|
+ */
|
|
|
+#define DLT_JUNIPER_PPPOE 167
|
|
|
+#define DLT_JUNIPER_PPPOE_ATM 168
|
|
|
+
|
|
|
+#define DLT_GPRS_LLC 169 /* GPRS LLC */
|
|
|
+#define DLT_GPF_T 170 /* GPF-T (ITU-T G.7041/Y.1303) */
|
|
|
+#define DLT_GPF_F 171 /* GPF-F (ITU-T G.7041/Y.1303) */
|
|
|
+
|
|
|
+/*
|
|
|
+ * Requested by Oolan Zimmer <oz@gcom.com> for use in Gcom's T1/E1 line
|
|
|
+ * monitoring equipment.
|
|
|
+ */
|
|
|
+#define DLT_GCOM_T1E1 172
|
|
|
+#define DLT_GCOM_SERIAL 173
|
|
|
+
|
|
|
+/*
|
|
|
+ * Juniper-private data link type, as per request from
|
|
|
+ * Hannes Gredler <hannes@juniper.net>. The DLT_ is used
|
|
|
+ * for internal communication to Physical Interface Cards (PIC)
|
|
|
+ */
|
|
|
+#define DLT_JUNIPER_PIC_PEER 174
|
|
|
+
|
|
|
+/*
|
|
|
+ * Link types requested by Gregor Maier <gregor@endace.com> of Endace
|
|
|
+ * Measurement Systems. They add an ERF header (see
|
|
|
+ * http://www.endace.com/support/EndaceRecordFormat.pdf) in front of
|
|
|
+ * the link-layer header.
|
|
|
+ */
|
|
|
+#define DLT_ERF_ETH 175 /* Ethernet */
|
|
|
+#define DLT_ERF_POS 176 /* Packet-over-SONET */
|
|
|
+
|
|
|
+/*
|
|
|
+ * Requested by Daniele Orlandi <daniele@orlandi.com> for raw LAPD
|
|
|
+ * for vISDN (http://www.orlandi.com/visdn/). Its link-layer header
|
|
|
+ * includes additional information before the LAPD header, so it's
|
|
|
+ * not necessarily a generic LAPD header.
|
|
|
+ */
|
|
|
+#define DLT_LINUX_LAPD 177
|
|
|
+
|
|
|
+/*
|
|
|
+ * Juniper-private data link type, as per request from
|
|
|
+ * Hannes Gredler <hannes@juniper.net>.
|
|
|
+ * The DLT_ are used for prepending meta-information
|
|
|
+ * like interface index, interface name
|
|
|
+ * before standard Ethernet, PPP, Frelay & C-HDLC Frames
|
|
|
+ */
|
|
|
+#define DLT_JUNIPER_ETHER 178
|
|
|
+#define DLT_JUNIPER_PPP 179
|
|
|
+#define DLT_JUNIPER_FRELAY 180
|
|
|
+#define DLT_JUNIPER_CHDLC 181
|
|
|
+
|
|
|
+/*
|
|
|
+ * Multi Link Frame Relay (FRF.16)
|
|
|
+ */
|
|
|
+#define DLT_MFR 182
|
|
|
+
|
|
|
+/*
|
|
|
+ * Juniper-private data link type, as per request from
|
|
|
+ * Hannes Gredler <hannes@juniper.net>.
|
|
|
+ * The DLT_ is used for internal communication with a
|
|
|
+ * voice Adapter Card (PIC)
|
|
|
+ */
|
|
|
+#define DLT_JUNIPER_VP 183
|
|
|
+
|
|
|
+/*
|
|
|
+ * Arinc 429 frames.
|
|
|
+ * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
|
|
|
+ * Every frame contains a 32bit A429 label.
|
|
|
+ * More documentation on Arinc 429 can be found at
|
|
|
+ * http://www.condoreng.com/support/downloads/tutorials/ARINCTutorial.pdf
|
|
|
+ */
|
|
|
+#define DLT_A429 184
|
|
|
+
|
|
|
+/*
|
|
|
+ * Arinc 653 Interpartition Communication messages.
|
|
|
+ * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
|
|
|
+ * Please refer to the A653-1 standard for more information.
|
|
|
+ */
|
|
|
+#define DLT_A653_ICM 185
|
|
|
+
|
|
|
+/*
|
|
|
+ * USB packets, beginning with a USB setup header; requested by
|
|
|
+ * Paolo Abeni <paolo.abeni@email.it>.
|
|
|
+ */
|
|
|
+#define DLT_USB 186
|
|
|
+
|
|
|
+/*
|
|
|
+ * Bluetooth HCI UART transport layer (part H:4); requested by
|
|
|
+ * Paolo Abeni.
|
|
|
+ */
|
|
|
+#define DLT_BLUETOOTH_HCI_H4 187
|
|
|
+
|
|
|
+/*
|
|
|
+ * IEEE 802.16 MAC Common Part Sublayer; requested by Maria Cruz
|
|
|
+ * <cruz_petagay@bah.com>.
|
|
|
+ */
|
|
|
+#define DLT_IEEE802_16_MAC_CPS 188
|
|
|
+
|
|
|
+/*
|
|
|
+ * USB packets, beginning with a Linux USB header; requested by
|
|
|
+ * Paolo Abeni <paolo.abeni@email.it>.
|
|
|
+ */
|
|
|
+#define DLT_USB_LINUX 189
|
|
|
+
|
|
|
+/*
|
|
|
+ * Controller Area Network (CAN) v. 2.0B packets.
|
|
|
+ * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
|
|
|
+ * Used to dump CAN packets coming from a CAN Vector board.
|
|
|
+ * More documentation on the CAN v2.0B frames can be found at
|
|
|
+ * http://www.can-cia.org/downloads/?269
|
|
|
+ */
|
|
|
+#define DLT_CAN20B 190
|
|
|
+
|
|
|
+/*
|
|
|
+ * IEEE 802.15.4, with address fields padded, as is done by Linux
|
|
|
+ * drivers; requested by Juergen Schimmer.
|
|
|
+ */
|
|
|
+#define DLT_IEEE802_15_4_LINUX 191
|
|
|
+
|
|
|
+/*
|
|
|
+ * Per Packet Information encapsulated packets.
|
|
|
+ * DLT_ requested by Gianluca Varenni <gianluca.varenni@cacetech.com>.
|
|
|
+ */
|
|
|
+#define DLT_PPI 192
|
|
|
+
|
|
|
+/*
|
|
|
+ * Header for 802.16 MAC Common Part Sublayer plus a radiotap radio header;
|
|
|
+ * requested by Charles Clancy.
|
|
|
+ */
|
|
|
+#define DLT_IEEE802_16_MAC_CPS_RADIO 193
|
|
|
+
|
|
|
+/*
|
|
|
+ * Juniper-private data link type, as per request from
|
|
|
+ * Hannes Gredler <hannes@juniper.net>.
|
|
|
+ * The DLT_ is used for internal communication with a
|
|
|
+ * integrated service module (ISM).
|
|
|
+ */
|
|
|
+#define DLT_JUNIPER_ISM 194
|
|
|
+
|
|
|
+/*
|
|
|
+ * IEEE 802.15.4, exactly as it appears in the spec (no padding, no
|
|
|
+ * nothing); requested by Mikko Saarnivala <mikko.saarnivala@sensinode.com>.
|
|
|
+ */
|
|
|
+#define DLT_IEEE802_15_4 195
|
|
|
+
|
|
|
+/*
|
|
|
+ * Various link-layer types, with a pseudo-header, for SITA
|
|
|
+ * (http://www.sita.aero/); requested by Fulko Hew (fulko.hew@gmail.com).
|
|
|
+ */
|
|
|
+#define DLT_SITA 196
|
|
|
+
|
|
|
+/*
|
|
|
+ * Various link-layer types, with a pseudo-header, for Endace DAG cards;
|
|
|
+ * encapsulates Endace ERF records. Requested by Stephen Donnelly
|
|
|
+ * <stephen@endace.com>.
|
|
|
+ */
|
|
|
+#define DLT_ERF 197
|
|
|
+
|
|
|
+/*
|
|
|
+ * Special header prepended to Ethernet packets when capturing from a
|
|
|
+ * u10 Networks board. Requested by Phil Mulholland
|
|
|
+ * <phil@u10networks.com>.
|
|
|
+ */
|
|
|
+#define DLT_RAIF1 198
|
|
|
+
|
|
|
+/*
|
|
|
+ * IPMB packet for IPMI, beginning with the I2C slave address, followed
|
|
|
+ * by the netFn and LUN, etc.. Requested by Chanthy Toeung
|
|
|
+ * <chanthy.toeung@ca.kontron.com>.
|
|
|
+ */
|
|
|
+#define DLT_IPMB 199
|
|
|
+
|
|
|
+/*
|
|
|
+ * Juniper-private data link type, as per request from
|
|
|
+ * Hannes Gredler <hannes@juniper.net>.
|
|
|
+ * The DLT_ is used for capturing data on a secure tunnel interface.
|
|
|
+ */
|
|
|
+#define DLT_JUNIPER_ST 200
|
|
|
+
|
|
|
+/*
|
|
|
+ * Bluetooth HCI UART transport layer (part H:4), with pseudo-header
|
|
|
+ * that includes direction information; requested by Paolo Abeni.
|
|
|
+ */
|
|
|
+#define DLT_BLUETOOTH_HCI_H4_WITH_PHDR 201
|
|
|
+
|
|
|
+/*
|
|
|
+ * AX.25 packet with a 1-byte KISS header; see
|
|
|
+ *
|
|
|
+ * http://www.ax25.net/kiss.htm
|
|
|
+ *
|
|
|
+ * as per Richard Stearn <richard@rns-stearn.demon.co.uk>.
|
|
|
+ */
|
|
|
+#define DLT_AX25_KISS 202
|
|
|
+
|
|
|
+/*
|
|
|
+ * LAPD packets from an ISDN channel, starting with the address field,
|
|
|
+ * with no pseudo-header.
|
|
|
+ * Requested by Varuna De Silva <varunax@gmail.com>.
|
|
|
+ */
|
|
|
+#define DLT_LAPD 203
|
|
|
+
|
|
|
+/*
|
|
|
+ * Variants of various link-layer headers, with a one-byte direction
|
|
|
+ * pseudo-header prepended - zero means "received by this host",
|
|
|
+ * non-zero (any non-zero value) means "sent by this host" - as per
|
|
|
+ * Will Barker <w.barker@zen.co.uk>.
|
|
|
+ */
|
|
|
+#define DLT_PPP_WITH_DIR 204 /* PPP - don't confuse with DLT_PPP_WITH_DIRECTION */
|
|
|
+#define DLT_C_HDLC_WITH_DIR 205 /* Cisco HDLC */
|
|
|
+#define DLT_FRELAY_WITH_DIR 206 /* Frame Relay */
|
|
|
+#define DLT_LAPB_WITH_DIR 207 /* LAPB */
|
|
|
+
|
|
|
+/*
|
|
|
+ * 208 is reserved for an as-yet-unspecified proprietary link-layer
|
|
|
+ * type, as requested by Will Barker.
|
|
|
+ */
|
|
|
+
|
|
|
+/*
|
|
|
+ * IPMB with a Linux-specific pseudo-header; as requested by Alexey Neyman
|
|
|
+ * <avn@pigeonpoint.com>.
|
|
|
+ */
|
|
|
+#define DLT_IPMB_LINUX 209
|
|
|
+
|
|
|
+/*
|
|
|
+ * FlexRay automotive bus - http://www.flexray.com/ - as requested
|
|
|
+ * by Hannes Kaelber <hannes.kaelber@x2e.de>.
|
|
|
+ */
|
|
|
+#define DLT_FLEXRAY 210
|
|
|
+
|
|
|
+/*
|
|
|
+ * Media Oriented Systems Transport (MOST) bus for multimedia
|
|
|
+ * transport - http://www.mostcooperation.com/ - as requested
|
|
|
+ * by Hannes Kaelber <hannes.kaelber@x2e.de>.
|
|
|
+ */
|
|
|
+#define DLT_MOST 211
|
|
|
+
|
|
|
+/*
|
|
|
+ * Local Interconnect Network (LIN) bus for vehicle networks -
|
|
|
+ * http://www.lin-subbus.org/ - as requested by Hannes Kaelber
|
|
|
+ * <hannes.kaelber@x2e.de>.
|
|
|
+ */
|
|
|
+#define DLT_LIN 212
|
|
|
+
|
|
|
+/*
|
|
|
+ * X2E-private data link type used for serial line capture,
|
|
|
+ * as requested by Hannes Kaelber <hannes.kaelber@x2e.de>.
|
|
|
+ */
|
|
|
+#define DLT_X2E_SERIAL 213
|
|
|
+
|
|
|
+/*
|
|
|
+ * X2E-private data link type used for the Xoraya data logger
|
|
|
+ * family, as requested by Hannes Kaelber <hannes.kaelber@x2e.de>.
|
|
|
+ */
|
|
|
+#define DLT_X2E_XORAYA 214
|
|
|
+
|
|
|
+/*
|
|
|
+ * IEEE 802.15.4, exactly as it appears in the spec (no padding, no
|
|
|
+ * nothing), but with the PHY-level data for non-ASK PHYs (4 octets
|
|
|
+ * of 0 as preamble, one octet of SFD, one octet of frame length+
|
|
|
+ * reserved bit, and then the MAC-layer data, starting with the
|
|
|
+ * frame control field).
|
|
|
+ *
|
|
|
+ * Requested by Max Filippov <jcmvbkbc@gmail.com>.
|
|
|
+ */
|
|
|
+#define DLT_IEEE802_15_4_NONASK_PHY 215
|
|
|
+
|
|
|
+
|
|
|
+/*
|
|
|
+ * DLT and savefile link type values are split into a class and
|
|
|
+ * a member of that class. A class value of 0 indicates a regular
|
|
|
+ * DLT_/LINKTYPE_ value.
|
|
|
+ */
|
|
|
+#define DLT_CLASS(x) ((x) & 0x03ff0000)
|
|
|
+
|
|
|
+/*
|
|
|
+ * NetBSD-specific generic "raw" link type. The class value indicates
|
|
|
+ * that this is the generic raw type, and the lower 16 bits are the
|
|
|
+ * address family we're dealing with. Those values are NetBSD-specific;
|
|
|
+ * do not assume that they correspond to AF_ values for your operating
|
|
|
+ * system.
|
|
|
+ */
|
|
|
+#define DLT_CLASS_NETBSD_RAWAF 0x02240000
|
|
|
+#define DLT_NETBSD_RAWAF(af) (DLT_CLASS_NETBSD_RAWAF | (af))
|
|
|
+#define DLT_NETBSD_RAWAF_AF(x) ((x) & 0x0000ffff)
|
|
|
+#define DLT_IS_NETBSD_RAWAF(x) (DLT_CLASS(x) == DLT_CLASS_NETBSD_RAWAF)
|
|
|
+
|
|
|
+
|
|
|
+/*
|
|
|
+ * The instruction encodings.
|
|
|
+ */
|
|
|
+/* instruction classes */
|
|
|
+#define BPF_CLASS(code) ((code) & 0x07)
|
|
|
+#define BPF_LD 0x00
|
|
|
+#define BPF_LDX 0x01
|
|
|
+#define BPF_ST 0x02
|
|
|
+#define BPF_STX 0x03
|
|
|
+#define BPF_ALU 0x04
|
|
|
+#define BPF_JMP 0x05
|
|
|
+#define BPF_RET 0x06
|
|
|
+#define BPF_MISC 0x07
|
|
|
+
|
|
|
+/* ld/ldx fields */
|
|
|
+#define BPF_SIZE(code) ((code) & 0x18)
|
|
|
+#define BPF_W 0x00
|
|
|
+#define BPF_H 0x08
|
|
|
+#define BPF_B 0x10
|
|
|
+#define BPF_MODE(code) ((code) & 0xe0)
|
|
|
+#define BPF_IMM 0x00
|
|
|
+#define BPF_ABS 0x20
|
|
|
+#define BPF_IND 0x40
|
|
|
+#define BPF_MEM 0x60
|
|
|
+#define BPF_LEN 0x80
|
|
|
+#define BPF_MSH 0xa0
|
|
|
+
|
|
|
+/* alu/jmp fields */
|
|
|
+#define BPF_OP(code) ((code) & 0xf0)
|
|
|
+#define BPF_ADD 0x00
|
|
|
+#define BPF_SUB 0x10
|
|
|
+#define BPF_MUL 0x20
|
|
|
+#define BPF_DIV 0x30
|
|
|
+#define BPF_OR 0x40
|
|
|
+#define BPF_AND 0x50
|
|
|
+#define BPF_LSH 0x60
|
|
|
+#define BPF_RSH 0x70
|
|
|
+#define BPF_NEG 0x80
|
|
|
+#define BPF_JA 0x00
|
|
|
+#define BPF_JEQ 0x10
|
|
|
+#define BPF_JGT 0x20
|
|
|
+#define BPF_JGE 0x30
|
|
|
+#define BPF_JSET 0x40
|
|
|
+#define BPF_SRC(code) ((code) & 0x08)
|
|
|
+#define BPF_K 0x00
|
|
|
+#define BPF_X 0x08
|
|
|
+
|
|
|
+/* ret - BPF_K and BPF_X also apply */
|
|
|
+#define BPF_RVAL(code) ((code) & 0x18)
|
|
|
+#define BPF_A 0x10
|
|
|
+
|
|
|
+/* misc */
|
|
|
+#define BPF_MISCOP(code) ((code) & 0xf8)
|
|
|
+#define BPF_TAX 0x00
|
|
|
+#define BPF_TXA 0x80
|
|
|
+
|
|
|
+/*
|
|
|
+ * The instruction data structure.
|
|
|
+ */
|
|
|
+struct bpf_insn {
|
|
|
+ u_short code;
|
|
|
+ u_char jt;
|
|
|
+ u_char jf;
|
|
|
+ bpf_u_int32 k;
|
|
|
+};
|
|
|
+
|
|
|
+/*
|
|
|
+ * Macros for insn array initializers.
|
|
|
+ */
|
|
|
+#define BPF_STMT(code, k) { (u_short)(code), 0, 0, k }
|
|
|
+#define BPF_JUMP(code, k, jt, jf) { (u_short)(code), jt, jf, k }
|
|
|
+
|
|
|
+#if __STDC__ || defined(__cplusplus)
|
|
|
+extern int bpf_validate(const struct bpf_insn *, int);
|
|
|
+extern u_int bpf_filter(const struct bpf_insn *, const u_char *, u_int, u_int);
|
|
|
+#else
|
|
|
+extern int bpf_validate();
|
|
|
+extern u_int bpf_filter();
|
|
|
+#endif
|
|
|
+
|
|
|
+/*
|
|
|
+ * Number of scratch memory words (for BPF_LD|BPF_MEM and BPF_ST).
|
|
|
+ */
|
|
|
+#define BPF_MEMWORDS 16
|
|
|
+
|
|
|
+#ifdef __cplusplus
|
|
|
+}
|
|
|
+#endif
|
|
|
+
|
|
|
+#endif
|
bernard.xiong@gmail.com