Merge pull request #2318 from Vincent-VG/master

添加片上外设驱动选项

bsp/stm32/stm32l476-st-nucleo/.config

@@ -62,7 +62,7 @@ CONFIG_RT_USING_DEVICE=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=256
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart2"
-CONFIG_RT_VER_NUM=0x40000
+CONFIG_RT_VER_NUM=0x40001
 CONFIG_ARCH_ARM=y
 CONFIG_ARCH_ARM_CORTEX_M=y
 CONFIG_ARCH_ARM_CORTEX_M4=y
@@ -112,6 +112,7 @@ CONFIG_RT_USING_DEVICE_IPC=y
 CONFIG_RT_PIPE_BUFSZ=512
 CONFIG_RT_USING_SERIAL=y
 CONFIG_RT_SERIAL_USING_DMA=y
+CONFIG_RT_SERIAL_RB_BUFSZ=64
 # CONFIG_RT_USING_CAN is not set
 # CONFIG_RT_USING_HWTIMER is not set
 # CONFIG_RT_USING_CPUTIME is not set
@@ -123,7 +124,8 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_MTD_NAND is not set
 # CONFIG_RT_USING_MTD is not set
 # CONFIG_RT_USING_PM is not set
-# CONFIG_RT_USING_RTC is not set
+CONFIG_RT_USING_RTC=y
+# CONFIG_RT_USING_SOFT_RTC is not set
 # CONFIG_RT_USING_SDIO is not set
 # CONFIG_RT_USING_SPI is not set
 # CONFIG_RT_USING_WDT is not set
@@ -143,7 +145,7 @@ CONFIG_RT_USING_PIN=y
 #
 # POSIX layer and C standard library
 #
-# CONFIG_RT_USING_LIBC is not set
+CONFIG_RT_USING_LIBC=y
 # CONFIG_RT_USING_PTHREADS is not set
 
 #
@@ -341,6 +343,9 @@ CONFIG_BSP_USING_STLINK_TO_USART=y
 CONFIG_BSP_USING_GPIO=y
 CONFIG_BSP_USING_UART=y
 CONFIG_BSP_USING_UART2=y
+# CONFIG_BSP_UART2_RX_USING_DMA is not set
+# CONFIG_BSP_USING_I2C is not set
+# CONFIG_BSP_USING_ONCHIP_RTC is not set
 
 #
 # Board extended module Drivers

bsp/stm32/stm32l476-st-nucleo/README.md

@@ -41,6 +41,8 @@
 | **片上外设**      | **支持情况** | **备注**                              |
 | GPIO              |     支持     |          |
 | UART              |     支持     | UART2    |
+| IIC               |     支持     | 软件模拟 |
+| RTC               |     支持     | LSE 时钟源|
 | **扩展模块**      | **支持情况** | **备注** |
 
 ## 使用说明

bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc

@@ -4,9 +4,10 @@ KeepUserPlacement=false
 Mcu.Family=STM32L4
 Mcu.IP0=NVIC
 Mcu.IP1=RCC
-Mcu.IP2=SYS
-Mcu.IP3=USART2
-Mcu.IPNb=4
+Mcu.IP2=RTC
+Mcu.IP3=SYS
+Mcu.IP4=USART2
+Mcu.IPNb=5
 Mcu.Name=STM32L476R(C-E-G)Tx
 Mcu.Package=LQFP64
 Mcu.Pin0=PC14-OSC32_IN (PC14)
@@ -15,8 +16,9 @@ Mcu.Pin2=PA2
 Mcu.Pin3=PA3
 Mcu.Pin4=PA13 (JTMS-SWDIO)
 Mcu.Pin5=PA14 (JTCK-SWCLK)
-Mcu.Pin6=VP_SYS_VS_Systick
-Mcu.PinsNb=7
+Mcu.Pin6=VP_RTC_VS_RTC_Activate
+Mcu.Pin7=VP_SYS_VS_Systick
+Mcu.PinsNb=8
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32L476RGTx
@@ -79,7 +81,7 @@ ProjectManager.StackSize=0x400
 ProjectManager.TargetToolchain=MDK-ARM V5
 ProjectManager.ToolChainLocation=
 ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART2_UART_Init-USART2-false-HAL-true
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART2_UART_Init-USART2-false-HAL-true,4-MX_RTC_Init-RTC-false-HAL-true
 RCC.ADCFreq_Value=64000000
 RCC.AHBFreq_Value=80000000
 RCC.APB1Freq_Value=80000000
@@ -96,7 +98,8 @@ RCC.HSI_VALUE=16000000
 RCC.I2C1Freq_Value=80000000
 RCC.I2C2Freq_Value=80000000
 RCC.I2C3Freq_Value=80000000
-RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,DFSDMFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSAI2PoutputFreq_Value,PLLSAI2RoutputFreq_Value,PLLSourceVirtual,PWRFreq_Value,RNGFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value,VCOSAI2OutputFreq_Value
+RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,DFSDMFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,LCDFreq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSAI2PoutputFreq_Value,PLLSAI2RoutputFreq_Value,PLLSourceVirtual,PWRFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value,VCOSAI2OutputFreq_Value
+RCC.LCDFreq_Value=32768
 RCC.LPTIM1Freq_Value=80000000
 RCC.LPTIM2Freq_Value=80000000
 RCC.LPUART1Freq_Value=80000000
@@ -116,6 +119,8 @@ RCC.PLLSAI2RoutputFreq_Value=64000000
 RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSI
 RCC.PWRFreq_Value=80000000
 RCC.RNGFreq_Value=64000000
+RCC.RTCClockSelection=RCC_RTCCLKSOURCE_LSE
+RCC.RTCFreq_Value=32768
 RCC.SAI1Freq_Value=18285714.285714287
 RCC.SAI2Freq_Value=18285714.285714287
 RCC.SDMMCFreq_Value=64000000
@@ -134,6 +139,8 @@ RCC.VCOSAI1OutputFreq_Value=128000000
 RCC.VCOSAI2OutputFreq_Value=128000000
 USART2.IPParameters=VirtualMode-Asynchronous
 USART2.VirtualMode-Asynchronous=VM_ASYNC
+VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
+VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
 VP_SYS_VS_Systick.Mode=SysTick
 VP_SYS_VS_Systick.Signal=SYS_VS_Systick
 board=custom

bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Inc/stm32l4xx_hal_conf.h

@@ -79,7 +79,7 @@
 /*#define HAL_QSPI_MODULE_ENABLED   */
 /*#define HAL_QSPI_MODULE_ENABLED   */
 /*#define HAL_RNG_MODULE_ENABLED   */
-/*#define HAL_RTC_MODULE_ENABLED   */
+#define HAL_RTC_MODULE_ENABLED
 /*#define HAL_SAI_MODULE_ENABLED   */
 /*#define HAL_SD_MODULE_ENABLED   */
 /*#define HAL_SMBUS_MODULE_ENABLED   */

bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/main.c

@@ -62,6 +62,8 @@
 /* USER CODE END PM */
 
 /* Private variables ---------------------------------------------------------*/
+RTC_HandleTypeDef hrtc;
+
 UART_HandleTypeDef huart2;
 
 /* USER CODE BEGIN PV */
@@ -73,6 +75,7 @@ UART_HandleTypeDef huart2;
 void SystemClock_Config(void);
 static void MX_GPIO_Init(void);
 static void MX_USART2_UART_Init(void);
+static void MX_RTC_Init(void);
 /* USER CODE BEGIN PFP */
 /* Private function prototypes -----------------------------------------------*/
 
@@ -112,6 +115,7 @@ int main(void)
   /* Initialize all configured peripherals */
   MX_GPIO_Init();
   MX_USART2_UART_Init();
+  MX_RTC_Init();
   /* USER CODE BEGIN 2 */
 
   /* USER CODE END 2 */
@@ -139,9 +143,14 @@ void SystemClock_Config(void)
   RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
   RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
 
+  /**Configure LSE Drive Capability 
+  */
+  HAL_PWR_EnableBkUpAccess();
+  __HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW);
   /**Initializes the CPU, AHB and APB busses clocks 
   */
-  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSE;
+  RCC_OscInitStruct.LSEState = RCC_LSE_ON;
   RCC_OscInitStruct.HSIState = RCC_HSI_ON;
   RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
   RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
@@ -168,8 +177,9 @@ void SystemClock_Config(void)
   {
     Error_Handler();
   }
-  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART2;
+  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_USART2;
   PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1;
+  PeriphClkInit.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
   if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
   {
     Error_Handler();
@@ -182,6 +192,41 @@ void SystemClock_Config(void)
   }
 }
 
+/**
+  * @brief RTC Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_RTC_Init(void)
+{
+
+  /* USER CODE BEGIN RTC_Init 0 */
+
+  /* USER CODE END RTC_Init 0 */
+
+  /* USER CODE BEGIN RTC_Init 1 */
+
+  /* USER CODE END RTC_Init 1 */
+  /**Initialize RTC Only 
+  */
+  hrtc.Instance = RTC;
+  hrtc.Init.HourFormat = RTC_HOURFORMAT_24;
+  hrtc.Init.AsynchPrediv = 127;
+  hrtc.Init.SynchPrediv = 255;
+  hrtc.Init.OutPut = RTC_OUTPUT_DISABLE;
+  hrtc.Init.OutPutRemap = RTC_OUTPUT_REMAP_NONE;
+  hrtc.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
+  hrtc.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
+  if (HAL_RTC_Init(&hrtc) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN RTC_Init 2 */
+
+  /* USER CODE END RTC_Init 2 */
+
+}
+
 /**
   * @brief USART2 Initialization Function
   * @param None

bsp/stm32/stm32l476-st-nucleo/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c

@@ -97,6 +97,53 @@ void HAL_MspInit(void)
   /* USER CODE END MspInit 1 */
 }
 
+/**
+* @brief RTC MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hrtc: RTC handle pointer
+* @retval None
+*/
+void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
+{
+
+  if(hrtc->Instance==RTC)
+  {
+  /* USER CODE BEGIN RTC_MspInit 0 */
+
+  /* USER CODE END RTC_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_RTC_ENABLE();
+  /* USER CODE BEGIN RTC_MspInit 1 */
+
+  /* USER CODE END RTC_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief RTC MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hrtc: RTC handle pointer
+* @retval None
+*/
+
+void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
+{
+
+  if(hrtc->Instance==RTC)
+  {
+  /* USER CODE BEGIN RTC_MspDeInit 0 */
+
+  /* USER CODE END RTC_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_RTC_DISABLE();
+  /* USER CODE BEGIN RTC_MspDeInit 1 */
+
+  /* USER CODE END RTC_MspDeInit 1 */
+  }
+
+}
+
 /**
 * @brief UART MSP Initialization
 * This function configures the hardware resources used in this example

bsp/stm32/stm32l476-st-nucleo/board/Kconfig

@@ -30,12 +30,68 @@ menu "On-chip Peripheral Drivers"
             config BSP_USING_UART2
                 bool "Enable UART2"
                 default n   
+                
             config BSP_UART2_RX_USING_DMA
                 bool "Enable UART2 RX DMA"
                 depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
                 default n
         endif
+        
+    menuconfig BSP_USING_I2C
+        bool "Enable I2C (software simulation)"
+        default n
+        select RT_USING_I2C
+        select RT_USING_I2C_BITOPS
+        select RT_USING_PIN
+        if BSP_USING_I2C
+            config BSP_USING_I2C1
+            bool "Enable I2C1 BUS (software simulation)"
+            default n
+            if BSP_USING_I2C1
+                config BSP_I2C1_SCL_PIN
+                    int "i2c1 scl pin number"
+                    range 1 176
+                    default 22
+                config BSP_I2C1_SDA_PIN
+                    int "I2C1 sda pin number"
+                    range 1 176
+                    default 23
+            endif
+
+            config BSP_USING_I2C2
+            bool "Enable I2C2 BUS (software simulation)"
+            default n
+            if BSP_USING_I2C2
+                config BSP_I2C2_SCL_PIN
+                    int "i2c2 scl pin number"
+                    range 1 176
+                    default 26
+                config BSP_I2C2_SDA_PIN
+                    int "I2C2 sda pin number"
+                    range 1 176
+                    default 27
+            endif
 
+            config BSP_USING_I2C3
+            bool "Enable I2C3 BUS (software simulation)"
+            default n
+            if BSP_USING_I2C3
+                config BSP_I2C3_SCL_PIN
+                    int "i2c3 scl pin number"
+                    range 1 176
+                    default 32
+                config BSP_I2C3_SDA_PIN
+                    int "I2C3 sda pin number"
+                    range 1 176
+                    default 33
+            endif
+        endif
+        
+    config BSP_USING_ONCHIP_RTC
+        bool "Enable RTC"
+        select RT_USING_RTC
+        default n
+        
 endmenu
 
 menu "Board extended module Drivers"

bsp/stm32/stm32l476-st-nucleo/board/board.c

@@ -16,6 +16,12 @@ void SystemClock_Config(void)
   RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
   RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
 
+#ifdef BSP_USING_ONCHIP_RTC
+  /**Configure LSE Drive Capability 
+  */
+  HAL_PWR_EnableBkUpAccess();
+  __HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW);
+#endif  
   /**Initializes the CPU, AHB and APB busses clocks 
   */
   RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;

bsp/stm32/stm32l476-st-nucleo/project.ewp

@@ -1,2275 +1,2328 @@
-<?xml version="1.0" encoding="UTF-8"?>
 <project>
-    <fileVersion>3</fileVersion>
-    <configuration>
-        <name>rt-thread</name>
-        <toolchain>
-            <name>ARM</name>
-        </toolchain>
+  <fileVersion>3</fileVersion>
+  <configuration>
+    <name>rt-thread</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>1</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>29</version>
+        <wantNonLocal>1</wantNonLocal>
         <debug>1</debug>
-        <settings>
-            <name>General</name>
-            <archiveVersion>3</archiveVersion>
-            <data>
-                <version>29</version>
-                <wantNonLocal>1</wantNonLocal>
-                <debug>1</debug>
-                <option>
-                    <name>ExePath</name>
-                    <state>build\iar\Exe</state>
-                </option>
-                <option>
-                    <name>ObjPath</name>
-                    <state>build\iar\Obj</state>
-                </option>
-                <option>
-                    <name>ListPath</name>
-                    <state>build\iar\List</state>
-                </option>
-                <option>
-                    <name>GEndianMode</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>Input description</name>
-                    <state>Automatic choice of formatter, without multibyte support.</state>
-                </option>
-                <option>
-                    <name>Output description</name>
-                    <state>Automatic choice of formatter, without multibyte support.</state>
-                </option>
-                <option>
-                    <name>GOutputBinary</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>OGCoreOrChip</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>GRuntimeLibSelect</name>
-                    <version>0</version>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>GRuntimeLibSelectSlave</name>
-                    <version>0</version>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>RTDescription</name>
-                    <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
-                </option>
-                <option>
-                    <name>OGProductVersion</name>
-                    <state>6.30.6.53380</state>
-                </option>
-                <option>
-                    <name>OGLastSavedByProductVersion</name>
-                    <state>8.11.2.13604</state>
-                </option>
-                <option>
-                    <name>GeneralEnableMisra</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>GeneralMisraVerbose</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>OGChipSelectEditMenu</name>
-                    <state>STM32L475VE	ST STM32L475VE</state>
-                </option>
-                <option>
-                    <name>GenLowLevelInterface</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>GEndianModeBE</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>OGBufferedTerminalOutput</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>GenStdoutInterface</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>GeneralMisraRules98</name>
-                    <version>0</version>
-                    <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-                </option>
-                <option>
-                    <name>GeneralMisraVer</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>GeneralMisraRules04</name>
-                    <version>0</version>
-                    <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-                </option>
-                <option>
-                    <name>RTConfigPath2</name>
-                    <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
-                </option>
-                <option>
-                    <name>GBECoreSlave</name>
-                    <version>25</version>
-                    <state>39</state>
-                </option>
-                <option>
-                    <name>OGUseCmsis</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>OGUseCmsisDspLib</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>GRuntimeLibThreads</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CoreVariant</name>
-                    <version>25</version>
-                    <state>39</state>
-                </option>
-                <option>
-                    <name>GFPUDeviceSlave</name>
-                    <state>STM32L475VE	ST STM32L475VE</state>
-                </option>
-                <option>
-                    <name>FPU2</name>
-                    <version>0</version>
-                    <state>4</state>
-                </option>
-                <option>
-                    <name>NrRegs</name>
-                    <version>0</version>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>NEON</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>GFPUCoreSlave2</name>
-                    <version>25</version>
-                    <state>39</state>
-                </option>
-                <option>
-                    <name>OGCMSISPackSelectDevice</name>
-                </option>
-                <option>
-                    <name>OgLibHeap</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>OGLibAdditionalLocale</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>OGPrintfVariant</name>
-                    <version>0</version>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>OGPrintfMultibyteSupport</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>OGScanfVariant</name>
-                    <version>0</version>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>OGScanfMultibyteSupport</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>GenLocaleTags</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>GenLocaleDisplayOnly</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>DSPExtension</name>
-                    <state>1</state>
-                </option>
-            </data>
-        </settings>
-        <settings>
-            <name>ICCARM</name>
-            <archiveVersion>2</archiveVersion>
-            <data>
-                <version>34</version>
-                <wantNonLocal>1</wantNonLocal>
-                <debug>1</debug>
-                <option>
-                    <name>CCOptimizationNoSizeConstraints</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCDefines</name>
-                    <state>STM32L476xx</state>
-                    <state>USE_HAL_DRIVER</state>
-                </option>
-                <option>
-                    <name>CCPreprocFile</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCPreprocComments</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCPreprocLine</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCListCFile</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCListCMnemonics</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCListCMessages</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCListAssFile</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCListAssSource</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCEnableRemarks</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCDiagSuppress</name>
-                    <state>Pa050</state>
-                </option>
-                <option>
-                    <name>CCDiagRemark</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>CCDiagWarning</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>CCDiagError</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>CCObjPrefix</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>CCAllowList</name>
-                    <version>1</version>
-                    <state>00000000</state>
-                </option>
-                <option>
-                    <name>CCDebugInfo</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IEndianMode</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IProcessor</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IExtraOptionsCheck</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IExtraOptions</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>CCLangConformance</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCSignedPlainChar</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>CCRequirePrototypes</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCDiagWarnAreErr</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCCompilerRuntimeInfo</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IFpuProcessor</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>OutputFile</name>
-                    <state>$FILE_BNAME$.o</state>
-                </option>
-                <option>
-                    <name>CCLibConfigHeader</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>PreInclude</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>CompilerMisraOverride</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCIncludePath2</name>
-                    <state>$PROJ_DIR$\..\..\..\components\finsh</state>
-                    <state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
-                    <state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4</state>
-                    <state>$PROJ_DIR$\board\ports</state>
-                    <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Include</state>
-                    <state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
-                    <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include</state>
-                    <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc</state>
-                    <state>$PROJ_DIR$\.</state>
-                    <state>$PROJ_DIR$\applications</state>
-                    <state>$PROJ_DIR$\..\libraries\HAL_Drivers\config</state>
-                    <state>$PROJ_DIR$\board</state>
-                    <state>$PROJ_DIR$\board\CubeMX_Config\Inc</state>
-                    <state>$PROJ_DIR$\..\..\..\include</state>
-                    <state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>
-                </option>
-                <option>
-                    <name>CCStdIncCheck</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCCodeSection</name>
-                    <state>.text</state>
-                </option>
-                <option>
-                    <name>IProcessorMode2</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>CCOptLevel</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>CCOptStrategy</name>
-                    <version>0</version>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCOptLevelSlave</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>CompilerMisraRules98</name>
-                    <version>0</version>
-                    <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-                </option>
-                <option>
-                    <name>CompilerMisraRules04</name>
-                    <version>0</version>
-                    <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-                </option>
-                <option>
-                    <name>CCPosIndRopi</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCPosIndRwpi</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCPosIndNoDynInit</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IccLang</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IccCDialect</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IccAllowVLA</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IccStaticDestr</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IccCppInlineSemantics</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IccCmsis</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IccFloatSemantics</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCNoLiteralPool</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCOptStrategySlave</name>
-                    <version>0</version>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCGuardCalls</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>CCEncSource</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCEncOutput</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCEncOutputBom</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>CCEncInput</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IccExceptions2</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IccRTTI2</name>
-                    <state>0</state>
-                </option>
-            </data>
-        </settings>
-        <settings>
-            <name>AARM</name>
-            <archiveVersion>2</archiveVersion>
-            <data>
-                <version>10</version>
-                <wantNonLocal>1</wantNonLocal>
-                <debug>1</debug>
-                <option>
-                    <name>AObjPrefix</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>AEndian</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>ACaseSensitivity</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>MacroChars</name>
-                    <version>0</version>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>AWarnEnable</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>AWarnWhat</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>AWarnOne</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>AWarnRange1</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>AWarnRange2</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>ADebug</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>AltRegisterNames</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>ADefines</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>AList</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>AListHeader</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>AListing</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>Includes</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>MacDefs</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>MacExps</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>MacExec</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>OnlyAssed</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>MultiLine</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>PageLengthCheck</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>PageLength</name>
-                    <state>80</state>
-                </option>
-                <option>
-                    <name>TabSpacing</name>
-                    <state>8</state>
-                </option>
-                <option>
-                    <name>AXRef</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>AXRefDefines</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>AXRefInternal</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>AXRefDual</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>AProcessor</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>AFpuProcessor</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>AOutputFile</name>
-                    <state>$FILE_BNAME$.o</state>
-                </option>
-                <option>
-                    <name>ALimitErrorsCheck</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>ALimitErrorsEdit</name>
-                    <state>100</state>
-                </option>
-                <option>
-                    <name>AIgnoreStdInclude</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>AUserIncludes</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>AExtraOptionsCheckV2</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>AExtraOptionsV2</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>AsmNoLiteralPool</name>
-                    <state>0</state>
-                </option>
-            </data>
-        </settings>
-        <settings>
-            <name>OBJCOPY</name>
-            <archiveVersion>0</archiveVersion>
-            <data>
-                <version>1</version>
-                <wantNonLocal>1</wantNonLocal>
-                <debug>1</debug>
-                <option>
-                    <name>OOCOutputFormat</name>
-                    <version>3</version>
-                    <state>3</state>
-                </option>
-                <option>
-                    <name>OCOutputOverride</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>OOCOutputFile</name>
-                    <state>../../../rtthread.bin</state>
-                </option>
-                <option>
-                    <name>OOCCommandLineProducer</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>OOCObjCopyEnable</name>
-                    <state>1</state>
-                </option>
-            </data>
-        </settings>
-        <settings>
-            <name>CUSTOM</name>
-            <archiveVersion>3</archiveVersion>
-            <data>
-                <extensions></extensions>
-                <cmdline></cmdline>
-                <hasPrio>0</hasPrio>
-            </data>
-        </settings>
-        <settings>
-            <name>BICOMP</name>
-            <archiveVersion>0</archiveVersion>
-            <data />
-        </settings>
-        <settings>
-            <name>BUILDACTION</name>
-            <archiveVersion>1</archiveVersion>
-            <data>
-                <prebuild></prebuild>
-                <postbuild></postbuild>
-            </data>
-        </settings>
-        <settings>
-            <name>ILINK</name>
-            <archiveVersion>0</archiveVersion>
-            <data>
-                <version>20</version>
-                <wantNonLocal>1</wantNonLocal>
-                <debug>1</debug>
-                <option>
-                    <name>IlinkLibIOConfig</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>XLinkMisraHandler</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkInputFileSlave</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkOutputFile</name>
-                    <state>project.out</state>
-                </option>
-                <option>
-                    <name>IlinkDebugInfoEnable</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkKeepSymbols</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkRawBinaryFile</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkRawBinarySymbol</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkRawBinarySegment</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkRawBinaryAlign</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkDefines</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkConfigDefines</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkMapFile</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkLogFile</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkLogInitialization</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkLogModule</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkLogSection</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkLogVeneer</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkIcfOverride</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkIcfFile</name>
-                    <state>$PROJ_DIR$\board\linker_scripts\link.icf</state>
-                </option>
-                <option>
-                    <name>IlinkIcfFileSlave</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkEnableRemarks</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkSuppressDiags</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkTreatAsRem</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkTreatAsWarn</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkTreatAsErr</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkWarningsAreErrors</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkUseExtraOptions</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkExtraOptions</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkLowLevelInterfaceSlave</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkAutoLibEnable</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkAdditionalLibs</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkOverrideProgramEntryLabel</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkProgramEntryLabelSelect</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkProgramEntryLabel</name>
-                    <state>__iar_program_start</state>
-                </option>
-                <option>
-                    <name>DoFill</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>FillerByte</name>
-                    <state>0xFF</state>
-                </option>
-                <option>
-                    <name>FillerStart</name>
-                    <state>0x0</state>
-                </option>
-                <option>
-                    <name>FillerEnd</name>
-                    <state>0x0</state>
-                </option>
-                <option>
-                    <name>CrcSize</name>
-                    <version>0</version>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>CrcAlign</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>CrcPoly</name>
-                    <state>0x11021</state>
-                </option>
-                <option>
-                    <name>CrcCompl</name>
-                    <version>0</version>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CrcBitOrder</name>
-                    <version>0</version>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CrcInitialValue</name>
-                    <state>0x0</state>
-                </option>
-                <option>
-                    <name>DoCrc</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkBE8Slave</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkBufferedTerminalOutput</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkStdoutInterfaceSlave</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>CrcFullSize</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkIElfToolPostProcess</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkLogAutoLibSelect</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkLogRedirSymbols</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkLogUnusedFragments</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkCrcReverseByteOrder</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkCrcUseAsInput</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkOptInline</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkOptExceptionsAllow</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkOptExceptionsForce</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkCmsis</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkOptMergeDuplSections</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkOptUseVfe</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkOptForceVfe</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkStackAnalysisEnable</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkStackControlFile</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkStackCallGraphFile</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>CrcAlgorithm</name>
-                    <version>1</version>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>CrcUnitSize</name>
-                    <version>0</version>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkThreadsSlave</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkLogCallGraph</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkIcfFile_AltDefault</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkEncInput</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkEncOutput</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkEncOutputBom</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkHeapSelect</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkLocaleSelect</name>
-                    <state>1</state>
-                </option>
-            </data>
-        </settings>
-        <settings>
-            <name>IARCHIVE</name>
-            <archiveVersion>0</archiveVersion>
-            <data>
-                <version>0</version>
-                <wantNonLocal>1</wantNonLocal>
-                <debug>1</debug>
-                <option>
-                    <name>IarchiveInputs</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IarchiveOverride</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IarchiveOutput</name>
-                    <state>###Unitialized###</state>
-                </option>
-            </data>
-        </settings>
-        <settings>
-            <name>BILINK</name>
-            <archiveVersion>0</archiveVersion>
-            <data />
-        </settings>
-    </configuration>
-    <configuration>
-        <name>Release</name>
-        <toolchain>
-            <name>ARM</name>
-        </toolchain>
+        <option>
+          <name>ExePath</name>
+          <state>build\iar\Exe</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>build\iar\Obj</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>build\iar\List</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Automatic choice of formatter, without multibyte support.</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Automatic choice of formatter, without multibyte support.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.30.6.53380</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>8.11.3.13977</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>STM32L475VE	ST STM32L475VE</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>25</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CoreVariant</name>
+          <version>25</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GFPUDeviceSlave</name>
+          <state>STM32L475VE	ST STM32L475VE</state>
+        </option>
+        <option>
+          <name>FPU2</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>NrRegs</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>NEON</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave2</name>
+          <version>25</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGCMSISPackSelectDevice</name>
+        </option>
+        <option>
+          <name>OgLibHeap</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGLibAdditionalLocale</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGPrintfVariant</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGPrintfMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGScanfVariant</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGScanfMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenLocaleTags</name>
+          <state />
+        </option>
+        <option>
+          <name>GenLocaleDisplayOnly</name>
+          <state />
+        </option>
+        <option>
+          <name>DSPExtension</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>34</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state />
+          <state>STM32L476xx</state>
+          <state>RT_USING_DLIBC</state>
+          <state>USE_HAL_DRIVER</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state>Pa050</state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state />
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state />
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state />
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>00000000</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state />
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state />
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state />
+          <state>$PROJ_DIR$\..\..\..\components\finsh</state>
+          <state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
+          <state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4</state>
+          <state>$PROJ_DIR$\board\ports</state>
+          <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Include</state>
+          <state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
+          <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include</state>
+          <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc</state>
+          <state>$PROJ_DIR$\.</state>
+          <state>$PROJ_DIR$\applications</state>
+          <state>$PROJ_DIR$\..\libraries\HAL_Drivers\config</state>
+          <state>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib</state>
+          <state>$PROJ_DIR$\board</state>
+          <state>$PROJ_DIR$\..\..\..\components\libc\compilers\common</state>
+          <state>$PROJ_DIR$\board\CubeMX_Config\Inc</state>
+          <state>$PROJ_DIR$\..\..\..\include</state>
+          <state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCEncSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEncOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEncOutputBom</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCEncInput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccExceptions2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccRTTI2</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>10</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state />
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state />
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state />
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ADefines</name>
+          <state />
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state />
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state />
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>3</version>
+          <state>3</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>../../../rtthread.bin</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions />
+        <cmdline />
+        <hasPrio>0</hasPrio>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data />
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild />
+        <postbuild />
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>20</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>project.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+          <state>$PROJ_DIR$\board\linker_scripts\link.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state />
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogCallGraph</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile_AltDefault</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkEncInput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkEncOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkEncOutputBom</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkHeapSelect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLocaleSelect</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state />
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data />
+    </settings>
+  </configuration>
+  <configuration>
+    <name>Release</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>29</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>Release\Exe</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>Release\Obj</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>Release\List</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state />
+        </option>
+        <option>
+          <name>Output description</name>
+          <state />
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state />
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>6.30.6.53380</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>8.11.3.13977</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>Default	None</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state />
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>25</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CoreVariant</name>
+          <version>25</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GFPUDeviceSlave</name>
+          <state>Default	None</state>
+        </option>
+        <option>
+          <name>FPU2</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>NrRegs</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>NEON</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave2</name>
+          <version>25</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGCMSISPackSelectDevice</name>
+        </option>
+        <option>
+          <name>OgLibHeap</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGLibAdditionalLocale</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGPrintfVariant</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGPrintfMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGScanfVariant</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGScanfMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenLocaleTags</name>
+          <state />
+        </option>
+        <option>
+          <name>GenLocaleDisplayOnly</name>
+          <state />
+        </option>
+        <option>
+          <name>DSPExtension</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>34</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state>STM32L476xx</state>
+          <state>RT_USING_DLIBC</state>
+          <state>USE_HAL_DRIVER</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state />
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state />
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state />
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state />
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state />
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state />
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state />
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state />
+          <state>$PROJ_DIR$\..\..\..\components\finsh</state>
+          <state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
+          <state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4</state>
+          <state>$PROJ_DIR$\board\ports</state>
+          <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Include</state>
+          <state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
+          <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include</state>
+          <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc</state>
+          <state>$PROJ_DIR$\.</state>
+          <state>$PROJ_DIR$\applications</state>
+          <state>$PROJ_DIR$\..\libraries\HAL_Drivers\config</state>
+          <state>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib</state>
+          <state>$PROJ_DIR$\board</state>
+          <state>$PROJ_DIR$\..\..\..\components\libc\compilers\common</state>
+          <state>$PROJ_DIR$\board\CubeMX_Config\Inc</state>
+          <state>$PROJ_DIR$\..\..\..\include</state>
+          <state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCEncSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEncOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEncOutputBom</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCEncInput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccExceptions2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccRTTI2</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>10</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state />
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state />
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state />
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ADefines</name>
+          <state />
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state />
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state />
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state />
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>3</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state />
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions />
+        <cmdline />
+        <hasPrio>0</hasPrio>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data />
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild />
+        <postbuild />
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>20</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>###Unitialized###</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+          <state>lnk0t.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state />
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state />
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>1</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogCallGraph</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile_AltDefault</name>
+          <state />
+        </option>
+        <option>
+          <name>IlinkEncInput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkEncOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkEncOutputBom</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkHeapSelect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLocaleSelect</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
         <debug>0</debug>
-        <settings>
-            <name>General</name>
-            <archiveVersion>3</archiveVersion>
-            <data>
-                <version>29</version>
-                <wantNonLocal>1</wantNonLocal>
-                <debug>0</debug>
-                <option>
-                    <name>ExePath</name>
-                    <state>Release\Exe</state>
-                </option>
-                <option>
-                    <name>ObjPath</name>
-                    <state>Release\Obj</state>
-                </option>
-                <option>
-                    <name>ListPath</name>
-                    <state>Release\List</state>
-                </option>
-                <option>
-                    <name>GEndianMode</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>Input description</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>Output description</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>GOutputBinary</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>OGCoreOrChip</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>GRuntimeLibSelect</name>
-                    <version>0</version>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>GRuntimeLibSelectSlave</name>
-                    <version>0</version>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>RTDescription</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>OGProductVersion</name>
-                    <state>6.30.6.53380</state>
-                </option>
-                <option>
-                    <name>OGLastSavedByProductVersion</name>
-                    <state>8.11.3.13977</state>
-                </option>
-                <option>
-                    <name>GeneralEnableMisra</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>GeneralMisraVerbose</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>OGChipSelectEditMenu</name>
-                    <state>Default	None</state>
-                </option>
-                <option>
-                    <name>GenLowLevelInterface</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>GEndianModeBE</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>OGBufferedTerminalOutput</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>GenStdoutInterface</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>GeneralMisraRules98</name>
-                    <version>0</version>
-                    <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-                </option>
-                <option>
-                    <name>GeneralMisraVer</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>GeneralMisraRules04</name>
-                    <version>0</version>
-                    <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-                </option>
-                <option>
-                    <name>RTConfigPath2</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>GBECoreSlave</name>
-                    <version>25</version>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>OGUseCmsis</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>OGUseCmsisDspLib</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>GRuntimeLibThreads</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CoreVariant</name>
-                    <version>25</version>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>GFPUDeviceSlave</name>
-                    <state>Default	None</state>
-                </option>
-                <option>
-                    <name>FPU2</name>
-                    <version>0</version>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>NrRegs</name>
-                    <version>0</version>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>NEON</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>GFPUCoreSlave2</name>
-                    <version>25</version>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>OGCMSISPackSelectDevice</name>
-                </option>
-                <option>
-                    <name>OgLibHeap</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>OGLibAdditionalLocale</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>OGPrintfVariant</name>
-                    <version>0</version>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>OGPrintfMultibyteSupport</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>OGScanfVariant</name>
-                    <version>0</version>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>OGScanfMultibyteSupport</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>GenLocaleTags</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>GenLocaleDisplayOnly</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>DSPExtension</name>
-                    <state>0</state>
-                </option>
-            </data>
-        </settings>
-        <settings>
-            <name>ICCARM</name>
-            <archiveVersion>2</archiveVersion>
-            <data>
-                <version>34</version>
-                <wantNonLocal>1</wantNonLocal>
-                <debug>0</debug>
-                <option>
-                    <name>CCOptimizationNoSizeConstraints</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCDefines</name>
-                    <state>STM32L476xx</state>
-                    <state>USE_HAL_DRIVER</state>
-                </option>
-                <option>
-                    <name>CCPreprocFile</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCPreprocComments</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCPreprocLine</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCListCFile</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCListCMnemonics</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCListCMessages</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCListAssFile</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCListAssSource</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCEnableRemarks</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCDiagSuppress</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>CCDiagRemark</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>CCDiagWarning</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>CCDiagError</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>CCObjPrefix</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>CCAllowList</name>
-                    <version>1</version>
-                    <state>11111110</state>
-                </option>
-                <option>
-                    <name>CCDebugInfo</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IEndianMode</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IProcessor</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IExtraOptionsCheck</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IExtraOptions</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>CCLangConformance</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCSignedPlainChar</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>CCRequirePrototypes</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCDiagWarnAreErr</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCCompilerRuntimeInfo</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IFpuProcessor</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>OutputFile</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>CCLibConfigHeader</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>PreInclude</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>CompilerMisraOverride</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCIncludePath2</name>
-                    <state>$PROJ_DIR$\..\..\..\components\finsh</state>
-                    <state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
-                    <state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4</state>
-                    <state>$PROJ_DIR$\board\ports</state>
-                    <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Include</state>
-                    <state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
-                    <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include</state>
-                    <state>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc</state>
-                    <state>$PROJ_DIR$\.</state>
-                    <state>$PROJ_DIR$\applications</state>
-                    <state>$PROJ_DIR$\..\libraries\HAL_Drivers\config</state>
-                    <state>$PROJ_DIR$\board</state>
-                    <state>$PROJ_DIR$\board\CubeMX_Config\Inc</state>
-                    <state>$PROJ_DIR$\..\..\..\include</state>
-                    <state>$PROJ_DIR$\..\libraries\HAL_Drivers</state>
-                </option>
-                <option>
-                    <name>CCStdIncCheck</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCCodeSection</name>
-                    <state>.text</state>
-                </option>
-                <option>
-                    <name>IProcessorMode2</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>CCOptLevel</name>
-                    <state>3</state>
-                </option>
-                <option>
-                    <name>CCOptStrategy</name>
-                    <version>0</version>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCOptLevelSlave</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>CompilerMisraRules98</name>
-                    <version>0</version>
-                    <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-                </option>
-                <option>
-                    <name>CompilerMisraRules04</name>
-                    <version>0</version>
-                    <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-                </option>
-                <option>
-                    <name>CCPosIndRopi</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCPosIndRwpi</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCPosIndNoDynInit</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IccLang</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IccCDialect</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IccAllowVLA</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IccStaticDestr</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IccCppInlineSemantics</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IccCmsis</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IccFloatSemantics</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCNoLiteralPool</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCOptStrategySlave</name>
-                    <version>0</version>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCGuardCalls</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>CCEncSource</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCEncOutput</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CCEncOutputBom</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>CCEncInput</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IccExceptions2</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IccRTTI2</name>
-                    <state>0</state>
-                </option>
-            </data>
-        </settings>
-        <settings>
-            <name>AARM</name>
-            <archiveVersion>2</archiveVersion>
-            <data>
-                <version>10</version>
-                <wantNonLocal>1</wantNonLocal>
-                <debug>0</debug>
-                <option>
-                    <name>AObjPrefix</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>AEndian</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>ACaseSensitivity</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>MacroChars</name>
-                    <version>0</version>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>AWarnEnable</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>AWarnWhat</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>AWarnOne</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>AWarnRange1</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>AWarnRange2</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>ADebug</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>AltRegisterNames</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>ADefines</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>AList</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>AListHeader</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>AListing</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>Includes</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>MacDefs</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>MacExps</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>MacExec</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>OnlyAssed</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>MultiLine</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>PageLengthCheck</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>PageLength</name>
-                    <state>80</state>
-                </option>
-                <option>
-                    <name>TabSpacing</name>
-                    <state>8</state>
-                </option>
-                <option>
-                    <name>AXRef</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>AXRefDefines</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>AXRefInternal</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>AXRefDual</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>AProcessor</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>AFpuProcessor</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>AOutputFile</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>ALimitErrorsCheck</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>ALimitErrorsEdit</name>
-                    <state>100</state>
-                </option>
-                <option>
-                    <name>AIgnoreStdInclude</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>AUserIncludes</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>AExtraOptionsCheckV2</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>AExtraOptionsV2</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>AsmNoLiteralPool</name>
-                    <state>0</state>
-                </option>
-            </data>
-        </settings>
-        <settings>
-            <name>OBJCOPY</name>
-            <archiveVersion>0</archiveVersion>
-            <data>
-                <version>1</version>
-                <wantNonLocal>1</wantNonLocal>
-                <debug>0</debug>
-                <option>
-                    <name>OOCOutputFormat</name>
-                    <version>3</version>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>OCOutputOverride</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>OOCOutputFile</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>OOCCommandLineProducer</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>OOCObjCopyEnable</name>
-                    <state>0</state>
-                </option>
-            </data>
-        </settings>
-        <settings>
-            <name>CUSTOM</name>
-            <archiveVersion>3</archiveVersion>
-            <data>
-                <extensions></extensions>
-                <cmdline></cmdline>
-                <hasPrio>0</hasPrio>
-            </data>
-        </settings>
-        <settings>
-            <name>BICOMP</name>
-            <archiveVersion>0</archiveVersion>
-            <data />
-        </settings>
-        <settings>
-            <name>BUILDACTION</name>
-            <archiveVersion>1</archiveVersion>
-            <data>
-                <prebuild></prebuild>
-                <postbuild></postbuild>
-            </data>
-        </settings>
-        <settings>
-            <name>ILINK</name>
-            <archiveVersion>0</archiveVersion>
-            <data>
-                <version>20</version>
-                <wantNonLocal>1</wantNonLocal>
-                <debug>0</debug>
-                <option>
-                    <name>IlinkLibIOConfig</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>XLinkMisraHandler</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkInputFileSlave</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkOutputFile</name>
-                    <state>###Unitialized###</state>
-                </option>
-                <option>
-                    <name>IlinkDebugInfoEnable</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkKeepSymbols</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkRawBinaryFile</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkRawBinarySymbol</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkRawBinarySegment</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkRawBinaryAlign</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkDefines</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkConfigDefines</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkMapFile</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkLogFile</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkLogInitialization</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkLogModule</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkLogSection</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkLogVeneer</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkIcfOverride</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkIcfFile</name>
-                    <state>lnk0t.icf</state>
-                </option>
-                <option>
-                    <name>IlinkIcfFileSlave</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkEnableRemarks</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkSuppressDiags</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkTreatAsRem</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkTreatAsWarn</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkTreatAsErr</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkWarningsAreErrors</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkUseExtraOptions</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkExtraOptions</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkLowLevelInterfaceSlave</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkAutoLibEnable</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkAdditionalLibs</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkOverrideProgramEntryLabel</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkProgramEntryLabelSelect</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkProgramEntryLabel</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>DoFill</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>FillerByte</name>
-                    <state>0xFF</state>
-                </option>
-                <option>
-                    <name>FillerStart</name>
-                    <state>0x0</state>
-                </option>
-                <option>
-                    <name>FillerEnd</name>
-                    <state>0x0</state>
-                </option>
-                <option>
-                    <name>CrcSize</name>
-                    <version>0</version>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>CrcAlign</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>CrcPoly</name>
-                    <state>0x11021</state>
-                </option>
-                <option>
-                    <name>CrcCompl</name>
-                    <version>0</version>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CrcBitOrder</name>
-                    <version>0</version>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>CrcInitialValue</name>
-                    <state>0x0</state>
-                </option>
-                <option>
-                    <name>DoCrc</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkBE8Slave</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkBufferedTerminalOutput</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkStdoutInterfaceSlave</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>CrcFullSize</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkIElfToolPostProcess</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkLogAutoLibSelect</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkLogRedirSymbols</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkLogUnusedFragments</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkCrcReverseByteOrder</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkCrcUseAsInput</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkOptInline</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkOptExceptionsAllow</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkOptExceptionsForce</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkCmsis</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkOptMergeDuplSections</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkOptUseVfe</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkOptForceVfe</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkStackAnalysisEnable</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkStackControlFile</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkStackCallGraphFile</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>CrcAlgorithm</name>
-                    <version>1</version>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>CrcUnitSize</name>
-                    <version>0</version>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkThreadsSlave</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkLogCallGraph</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkIcfFile_AltDefault</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IlinkEncInput</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkEncOutput</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IlinkEncOutputBom</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkHeapSelect</name>
-                    <state>1</state>
-                </option>
-                <option>
-                    <name>IlinkLocaleSelect</name>
-                    <state>1</state>
-                </option>
-            </data>
-        </settings>
-        <settings>
-            <name>IARCHIVE</name>
-            <archiveVersion>0</archiveVersion>
-            <data>
-                <version>0</version>
-                <wantNonLocal>1</wantNonLocal>
-                <debug>0</debug>
-                <option>
-                    <name>IarchiveInputs</name>
-                    <state></state>
-                </option>
-                <option>
-                    <name>IarchiveOverride</name>
-                    <state>0</state>
-                </option>
-                <option>
-                    <name>IarchiveOutput</name>
-                    <state>###Unitialized###</state>
-                </option>
-            </data>
-        </settings>
-        <settings>
-            <name>BILINK</name>
-            <archiveVersion>0</archiveVersion>
-            <data />
-        </settings>
-    </configuration>
-    <group>
-        <name>Applications</name>
-        <file>
-            <name>$PROJ_DIR$\applications\main.c</name>
-        </file>
-    </group>
-    <group>
-        <name>cpu</name>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\backtrace.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\context_iar.S</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\cpuport.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\div0.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\showmem.c</name>
-        </file>
-    </group>
-    <group>
-        <name>DeviceDrivers</name>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\components\drivers\src\completion.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\components\drivers\src\dataqueue.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\components\drivers\misc\pin.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\components\drivers\src\pipe.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\components\drivers\src\ringblk_buf.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\components\drivers\src\ringbuffer.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\components\drivers\serial\serial.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\components\drivers\src\waitqueue.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\components\drivers\src\workqueue.c</name>
-        </file>
-    </group>
-    <group>
-        <name>Drivers</name>
-        <file>
-            <name>$PROJ_DIR$\board\board.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_common.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_gpio.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_usart.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\iar\startup_stm32l476xx.s</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\board\CubeMX_Config\Src\stm32l4xx_hal_msp.c</name>
-        </file>
-    </group>
-    <group>
-        <name>finsh</name>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\components\finsh\cmd.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\components\finsh\msh.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\components\finsh\msh_cmd.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\components\finsh\msh_file.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\components\finsh\shell.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\components\finsh\symbol.c</name>
-        </file>
-    </group>
-    <group>
-        <name>Kernel</name>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\src\clock.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\src\components.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\src\cpu.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\src\device.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\src\idle.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\src\ipc.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\src\irq.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\src\kservice.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\src\mem.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\src\mempool.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\src\object.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\src\scheduler.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\src\signal.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\src\thread.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\..\..\src\timer.c</name>
-        </file>
-    </group>
-    <group>
-        <name>STM32_HAL</name>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_comp.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc_ex.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp_ex.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rng.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_sram.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart_ex.c</name>
-        </file>
-        <file>
-            <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c</name>
-        </file>
-    </group>
+        <option>
+          <name>IarchiveInputs</name>
+          <state />
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data />
+    </settings>
+  </configuration>
+  <group>
+    <name>Kernel</name>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\src\clock.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\src\components.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\src\cpu.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\src\device.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\src\idle.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\src\ipc.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\src\irq.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\src\kservice.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\src\mem.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\src\mempool.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\src\object.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\src\scheduler.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\src\signal.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\src\thread.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\src\timer.c</name>
+    </file>
+  </group>
+  <group>
+    <name>Applications</name>
+    <file>
+      <name>$PROJ_DIR$\applications\main.c</name>
+    </file>
+  </group>
+  <group>
+    <name>Drivers</name>
+    <file>
+      <name>$PROJ_DIR$\board\board.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\board\CubeMX_Config\Src\stm32l4xx_hal_msp.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\iar\startup_stm32l476xx.s</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_gpio.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_usart.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\HAL_Drivers\drv_common.c</name>
+    </file>
+  </group>
+  <group>
+    <name>cpu</name>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\backtrace.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\div0.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\showmem.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\cpuport.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\context_iar.S</name>
+    </file>
+  </group>
+  <group>
+    <name>DeviceDrivers</name>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\drivers\misc\pin.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\drivers\serial\serial.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\drivers\src\completion.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\drivers\src\dataqueue.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\drivers\src\pipe.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\drivers\src\ringblk_buf.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\drivers\src\ringbuffer.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\drivers\src\waitqueue.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\drivers\src\workqueue.c</name>
+    </file>
+  </group>
+  <group>
+    <name>finsh</name>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\finsh\shell.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\finsh\symbol.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\finsh\cmd.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\finsh\msh.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\finsh\msh_cmd.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\finsh\msh_file.c</name>
+    </file>
+  </group>
+  <group>
+    <name>libc</name>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\libc\compilers\common\gmtime_r.c</name>
+    </file>
+  </group>
+  <group>
+    <name>dlib</name>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\environ.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\libc.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\rmtx.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\stdio.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_close.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_lseek.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_mem.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_open.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_read.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_remove.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\syscall_write.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\components\libc\compilers\dlib\time.c</name>
+    </file>
+  </group>
+  <group>
+    <name>STM32_HAL</name>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_comp.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc_ex.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp_ex.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rng.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_sram.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart_ex.c</name>
+    </file>
+  </group>
 </project>

bsp/stm32/stm32l476-st-nucleo/project.uvoptx

@@ -182,827 +182,11 @@
   </Target>
 
   <Group>
-    <GroupName>Kernel</GroupName>
+    <GroupName>Source Group 1</GroupName>
     <tvExp>0</tvExp>
     <tvExpOptDlg>0</tvExpOptDlg>
     <cbSel>0</cbSel>
     <RteFlg>0</RteFlg>
-    <File>
-      <GroupNumber>1</GroupNumber>
-      <FileNumber>1</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\clock.c</PathWithFileName>
-      <FilenameWithoutPath>clock.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>1</GroupNumber>
-      <FileNumber>2</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\components.c</PathWithFileName>
-      <FilenameWithoutPath>components.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>1</GroupNumber>
-      <FileNumber>3</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\cpu.c</PathWithFileName>
-      <FilenameWithoutPath>cpu.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>1</GroupNumber>
-      <FileNumber>4</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\device.c</PathWithFileName>
-      <FilenameWithoutPath>device.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>1</GroupNumber>
-      <FileNumber>5</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\idle.c</PathWithFileName>
-      <FilenameWithoutPath>idle.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>1</GroupNumber>
-      <FileNumber>6</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\ipc.c</PathWithFileName>
-      <FilenameWithoutPath>ipc.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>1</GroupNumber>
-      <FileNumber>7</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\irq.c</PathWithFileName>
-      <FilenameWithoutPath>irq.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>1</GroupNumber>
-      <FileNumber>8</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\kservice.c</PathWithFileName>
-      <FilenameWithoutPath>kservice.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>1</GroupNumber>
-      <FileNumber>9</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\mem.c</PathWithFileName>
-      <FilenameWithoutPath>mem.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>1</GroupNumber>
-      <FileNumber>10</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\mempool.c</PathWithFileName>
-      <FilenameWithoutPath>mempool.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>1</GroupNumber>
-      <FileNumber>11</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\object.c</PathWithFileName>
-      <FilenameWithoutPath>object.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>1</GroupNumber>
-      <FileNumber>12</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\scheduler.c</PathWithFileName>
-      <FilenameWithoutPath>scheduler.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>1</GroupNumber>
-      <FileNumber>13</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\signal.c</PathWithFileName>
-      <FilenameWithoutPath>signal.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>1</GroupNumber>
-      <FileNumber>14</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\thread.c</PathWithFileName>
-      <FilenameWithoutPath>thread.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>1</GroupNumber>
-      <FileNumber>15</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\src\timer.c</PathWithFileName>
-      <FilenameWithoutPath>timer.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-  </Group>
-
-  <Group>
-    <GroupName>Applications</GroupName>
-    <tvExp>0</tvExp>
-    <tvExpOptDlg>0</tvExpOptDlg>
-    <cbSel>0</cbSel>
-    <RteFlg>0</RteFlg>
-    <File>
-      <GroupNumber>2</GroupNumber>
-      <FileNumber>16</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>applications\main.c</PathWithFileName>
-      <FilenameWithoutPath>main.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-  </Group>
-
-  <Group>
-    <GroupName>Drivers</GroupName>
-    <tvExp>0</tvExp>
-    <tvExpOptDlg>0</tvExpOptDlg>
-    <cbSel>0</cbSel>
-    <RteFlg>0</RteFlg>
-    <File>
-      <GroupNumber>3</GroupNumber>
-      <FileNumber>17</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>board\board.c</PathWithFileName>
-      <FilenameWithoutPath>board.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>3</GroupNumber>
-      <FileNumber>18</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>board\CubeMX_Config\Src\stm32l4xx_hal_msp.c</PathWithFileName>
-      <FilenameWithoutPath>stm32l4xx_hal_msp.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>3</GroupNumber>
-      <FileNumber>19</FileNumber>
-      <FileType>2</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\arm\startup_stm32l476xx.s</PathWithFileName>
-      <FilenameWithoutPath>startup_stm32l476xx.s</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>3</GroupNumber>
-      <FileNumber>20</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\HAL_Drivers\drv_gpio.c</PathWithFileName>
-      <FilenameWithoutPath>drv_gpio.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>3</GroupNumber>
-      <FileNumber>21</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\HAL_Drivers\drv_usart.c</PathWithFileName>
-      <FilenameWithoutPath>drv_usart.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>3</GroupNumber>
-      <FileNumber>22</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\HAL_Drivers\drv_common.c</PathWithFileName>
-      <FilenameWithoutPath>drv_common.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-  </Group>
-
-  <Group>
-    <GroupName>cpu</GroupName>
-    <tvExp>0</tvExp>
-    <tvExpOptDlg>0</tvExpOptDlg>
-    <cbSel>0</cbSel>
-    <RteFlg>0</RteFlg>
-    <File>
-      <GroupNumber>4</GroupNumber>
-      <FileNumber>23</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\libcpu\arm\common\backtrace.c</PathWithFileName>
-      <FilenameWithoutPath>backtrace.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>4</GroupNumber>
-      <FileNumber>24</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\libcpu\arm\common\div0.c</PathWithFileName>
-      <FilenameWithoutPath>div0.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>4</GroupNumber>
-      <FileNumber>25</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\libcpu\arm\common\showmem.c</PathWithFileName>
-      <FilenameWithoutPath>showmem.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>4</GroupNumber>
-      <FileNumber>26</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\libcpu\arm\cortex-m4\cpuport.c</PathWithFileName>
-      <FilenameWithoutPath>cpuport.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>4</GroupNumber>
-      <FileNumber>27</FileNumber>
-      <FileType>2</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\libcpu\arm\cortex-m4\context_rvds.S</PathWithFileName>
-      <FilenameWithoutPath>context_rvds.S</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-  </Group>
-
-  <Group>
-    <GroupName>DeviceDrivers</GroupName>
-    <tvExp>0</tvExp>
-    <tvExpOptDlg>0</tvExpOptDlg>
-    <cbSel>0</cbSel>
-    <RteFlg>0</RteFlg>
-    <File>
-      <GroupNumber>5</GroupNumber>
-      <FileNumber>28</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\drivers\misc\pin.c</PathWithFileName>
-      <FilenameWithoutPath>pin.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>5</GroupNumber>
-      <FileNumber>29</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\drivers\serial\serial.c</PathWithFileName>
-      <FilenameWithoutPath>serial.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>5</GroupNumber>
-      <FileNumber>30</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\drivers\src\completion.c</PathWithFileName>
-      <FilenameWithoutPath>completion.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>5</GroupNumber>
-      <FileNumber>31</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\drivers\src\dataqueue.c</PathWithFileName>
-      <FilenameWithoutPath>dataqueue.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>5</GroupNumber>
-      <FileNumber>32</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\drivers\src\pipe.c</PathWithFileName>
-      <FilenameWithoutPath>pipe.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>5</GroupNumber>
-      <FileNumber>33</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\drivers\src\ringblk_buf.c</PathWithFileName>
-      <FilenameWithoutPath>ringblk_buf.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>5</GroupNumber>
-      <FileNumber>34</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\drivers\src\ringbuffer.c</PathWithFileName>
-      <FilenameWithoutPath>ringbuffer.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>5</GroupNumber>
-      <FileNumber>35</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\drivers\src\waitqueue.c</PathWithFileName>
-      <FilenameWithoutPath>waitqueue.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>5</GroupNumber>
-      <FileNumber>36</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\drivers\src\workqueue.c</PathWithFileName>
-      <FilenameWithoutPath>workqueue.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-  </Group>
-
-  <Group>
-    <GroupName>finsh</GroupName>
-    <tvExp>0</tvExp>
-    <tvExpOptDlg>0</tvExpOptDlg>
-    <cbSel>0</cbSel>
-    <RteFlg>0</RteFlg>
-    <File>
-      <GroupNumber>6</GroupNumber>
-      <FileNumber>37</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\finsh\shell.c</PathWithFileName>
-      <FilenameWithoutPath>shell.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>6</GroupNumber>
-      <FileNumber>38</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\finsh\symbol.c</PathWithFileName>
-      <FilenameWithoutPath>symbol.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>6</GroupNumber>
-      <FileNumber>39</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\finsh\cmd.c</PathWithFileName>
-      <FilenameWithoutPath>cmd.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>6</GroupNumber>
-      <FileNumber>40</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\finsh\msh.c</PathWithFileName>
-      <FilenameWithoutPath>msh.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>6</GroupNumber>
-      <FileNumber>41</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\finsh\msh_cmd.c</PathWithFileName>
-      <FilenameWithoutPath>msh_cmd.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>6</GroupNumber>
-      <FileNumber>42</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\..\..\components\finsh\msh_file.c</PathWithFileName>
-      <FilenameWithoutPath>msh_file.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-  </Group>
-
-  <Group>
-    <GroupName>STM32_HAL</GroupName>
-    <tvExp>0</tvExp>
-    <tvExpOptDlg>0</tvExpOptDlg>
-    <cbSel>0</cbSel>
-    <RteFlg>0</RteFlg>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>43</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c</PathWithFileName>
-      <FilenameWithoutPath>system_stm32l4xx.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>44</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c</PathWithFileName>
-      <FilenameWithoutPath>stm32l4xx_hal.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>45</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_comp.c</PathWithFileName>
-      <FilenameWithoutPath>stm32l4xx_hal_comp.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>46</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c</PathWithFileName>
-      <FilenameWithoutPath>stm32l4xx_hal_cortex.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>47</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc.c</PathWithFileName>
-      <FilenameWithoutPath>stm32l4xx_hal_crc.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>48</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc_ex.c</PathWithFileName>
-      <FilenameWithoutPath>stm32l4xx_hal_crc_ex.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>49</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp.c</PathWithFileName>
-      <FilenameWithoutPath>stm32l4xx_hal_cryp.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>50</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp_ex.c</PathWithFileName>
-      <FilenameWithoutPath>stm32l4xx_hal_cryp_ex.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>51</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c</PathWithFileName>
-      <FilenameWithoutPath>stm32l4xx_hal_dma.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>52</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c</PathWithFileName>
-      <FilenameWithoutPath>stm32l4xx_hal_dma_ex.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>53</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c</PathWithFileName>
-      <FilenameWithoutPath>stm32l4xx_hal_exti.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>54</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c</PathWithFileName>
-      <FilenameWithoutPath>stm32l4xx_hal_pwr.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>55</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c</PathWithFileName>
-      <FilenameWithoutPath>stm32l4xx_hal_pwr_ex.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>56</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c</PathWithFileName>
-      <FilenameWithoutPath>stm32l4xx_hal_rcc.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>57</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c</PathWithFileName>
-      <FilenameWithoutPath>stm32l4xx_hal_rcc_ex.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>58</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rng.c</PathWithFileName>
-      <FilenameWithoutPath>stm32l4xx_hal_rng.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>59</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_sram.c</PathWithFileName>
-      <FilenameWithoutPath>stm32l4xx_hal_sram.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>60</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c</PathWithFileName>
-      <FilenameWithoutPath>stm32l4xx_hal_gpio.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>61</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c</PathWithFileName>
-      <FilenameWithoutPath>stm32l4xx_hal_uart.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>62</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c</PathWithFileName>
-      <FilenameWithoutPath>stm32l4xx_hal_uart_ex.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>63</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart.c</PathWithFileName>
-      <FilenameWithoutPath>stm32l4xx_hal_usart.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
-    <File>
-      <GroupNumber>7</GroupNumber>
-      <FileNumber>64</FileNumber>
-      <FileType>1</FileType>
-      <tvExp>0</tvExp>
-      <tvExpOptDlg>0</tvExpOptDlg>
-      <bDave2>0</bDave2>
-      <PathWithFileName>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart_ex.c</PathWithFileName>
-      <FilenameWithoutPath>stm32l4xx_hal_usart_ex.c</FilenameWithoutPath>
-      <RteFlg>0</RteFlg>
-      <bShared>0</bShared>
-    </File>
   </Group>
 
 </ProjectOpt>

bsp/stm32/stm32l476-st-nucleo/project.uvprojx

@@ -1,10 +1,7 @@
 <?xml version="1.0" encoding="UTF-8" standalone="no" ?>
 <Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
-
   <SchemaVersion>2.1</SchemaVersion>
-
   <Header>### uVision Project, (C) Keil Software</Header>
-
   <Targets>
     <Target>
       <TargetName>rt-thread</TargetName>
@@ -19,28 +16,28 @@
           <PackID>Keil.STM32L4xx_DFP.2.0.0</PackID>
           <PackURL>http://www.keil.com/pack</PackURL>
           <Cpu>IRAM(0x20000000,0x00018000) IRAM2(0x10000000,0x00008000) IROM(0x08000000,0x00100000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
-          <FlashUtilSpec></FlashUtilSpec>
-          <StartupFile></StartupFile>
+          <FlashUtilSpec />
+          <StartupFile />
           <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32L4xx_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32L476RGTx$CMSIS\Flash\STM32L4xx_1024.FLM))</FlashDriverDll>
           <DeviceId>0</DeviceId>
           <RegisterFile>$$Device:STM32L476RGTx$Drivers\CMSIS\Device\ST\STM32L4xx\Include\stm32l4xx.h</RegisterFile>
-          <MemoryEnv></MemoryEnv>
-          <Cmp></Cmp>
-          <Asm></Asm>
-          <Linker></Linker>
-          <OHString></OHString>
-          <InfinionOptionDll></InfinionOptionDll>
-          <SLE66CMisc></SLE66CMisc>
-          <SLE66AMisc></SLE66AMisc>
-          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <MemoryEnv />
+          <Cmp />
+          <Asm />
+          <Linker />
+          <OHString />
+          <InfinionOptionDll />
+          <SLE66CMisc />
+          <SLE66AMisc />
+          <SLE66LinkerMisc />
           <SFDFile>$$Device:STM32L476RGTx$CMSIS\SVD\STM32L4x6.svd</SFDFile>
           <bCustSvd>0</bCustSvd>
           <UseEnv>0</UseEnv>
-          <BinPath></BinPath>
-          <IncludePath></IncludePath>
-          <LibPath></LibPath>
-          <RegisterFilePath></RegisterFilePath>
-          <DBRegisterFilePath></DBRegisterFilePath>
+          <BinPath />
+          <IncludePath />
+          <LibPath />
+          <RegisterFilePath />
+          <DBRegisterFilePath />
           <TargetStatus>
             <Error>0</Error>
             <ExitCodeStop>0</ExitCodeStop>
@@ -62,8 +59,8 @@
           <BeforeCompile>
             <RunUserProg1>0</RunUserProg1>
             <RunUserProg2>0</RunUserProg2>
-            <UserProg1Name></UserProg1Name>
-            <UserProg2Name></UserProg2Name>
+            <UserProg1Name />
+            <UserProg2Name />
             <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
             <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
             <nStopU1X>0</nStopU1X>
@@ -72,8 +69,8 @@
           <BeforeMake>
             <RunUserProg1>0</RunUserProg1>
             <RunUserProg2>0</RunUserProg2>
-            <UserProg1Name></UserProg1Name>
-            <UserProg2Name></UserProg2Name>
+            <UserProg1Name />
+            <UserProg2Name />
             <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
             <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
             <nStopB1X>0</nStopB1X>
@@ -83,14 +80,14 @@
             <RunUserProg1>1</RunUserProg1>
             <RunUserProg2>0</RunUserProg2>
             <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
-            <UserProg2Name></UserProg2Name>
+            <UserProg2Name />
             <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
             <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
             <nStopA1X>0</nStopA1X>
             <nStopA2X>0</nStopA2X>
           </AfterMake>
           <SelectedForBatchBuild>0</SelectedForBatchBuild>
-          <SVCSIdString></SVCSIdString>
+          <SVCSIdString />
         </TargetCommonOption>
         <CommonProperty>
           <UseCPPCompiler>0</UseCPPCompiler>
@@ -104,8 +101,8 @@
           <AssembleAssemblyFile>0</AssembleAssemblyFile>
           <PublicsOnly>0</PublicsOnly>
           <StopOnExitCode>3</StopOnExitCode>
-          <CustomArgument></CustomArgument>
-          <IncludeLibraryModules></IncludeLibraryModules>
+          <CustomArgument />
+          <IncludeLibraryModules />
           <ComprImg>1</ComprImg>
         </CommonProperty>
         <DllOption>
@@ -138,11 +135,11 @@
           </Flash1>
           <bUseTDR>1</bUseTDR>
           <Flash2>BIN\UL2CM3.DLL</Flash2>
-          <Flash3></Flash3>
-          <Flash4></Flash4>
-          <pFcarmOut></pFcarmOut>
-          <pFcarmGrp></pFcarmGrp>
-          <pFcArmRoot></pFcArmRoot>
+          <Flash3 />
+          <Flash4 />
+          <pFcarmOut />
+          <pFcarmGrp />
+          <pFcArmRoot />
           <FcArmLst>0</FcArmLst>
         </Utilities>
         <TargetArmAds>
@@ -175,7 +172,7 @@
             <RvctClst>0</RvctClst>
             <GenPPlst>0</GenPPlst>
             <AdsCpuType>"Cortex-M4"</AdsCpuType>
-            <RvctDeviceName></RvctDeviceName>
+            <RvctDeviceName />
             <mOS>0</mOS>
             <uocRom>0</uocRom>
             <uocRam>0</uocRam>
@@ -308,7 +305,7 @@
                 <Size>0x8000</Size>
               </OCR_RVCT10>
             </OnChipMemories>
-            <RvctStartVector></RvctStartVector>
+            <RvctStartVector />
           </ArmAdsMisc>
           <Cads>
             <interw>1</interw>
@@ -335,10 +332,10 @@
             <v6WtE>0</v6WtE>
             <v6Rtti>0</v6Rtti>
             <VariousControls>
-              <MiscControls></MiscControls>
-              <Define>USE_HAL_DRIVER, STM32L476xx</Define>
-              <Undefine></Undefine>
-              <IncludePath>.;..\..\..\include;.;applications;board;board\CubeMX_Config\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc;..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include;..\libraries\STM32L4xx_HAL\CMSIS\Include</IncludePath>
+              <MiscControls />
+              <Define>USE_HAL_DRIVER, STM32L476xx, RT_USING_ARM_LIBC</Define>
+              <Undefine />
+              <IncludePath>.;..\..\..\include;applications;board;board\CubeMX_Config\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\..\..\components\libc\compilers\armlibc;..\..\..\components\libc\compilers\common;..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Inc;..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Include;..\libraries\STM32L4xx_HAL\CMSIS\Include</IncludePath>
             </VariousControls>
           </Cads>
           <Aads>
@@ -353,10 +350,10 @@
             <useXO>0</useXO>
             <uClangAs>0</uClangAs>
             <VariousControls>
-              <MiscControls></MiscControls>
-              <Define></Define>
-              <Undefine></Undefine>
-              <IncludePath></IncludePath>
+              <MiscControls />
+              <Define />
+              <Undefine />
+              <IncludePath />
             </VariousControls>
           </Aads>
           <LDads>
@@ -368,13 +365,13 @@
             <useFile>0</useFile>
             <TextAddressRange>0x08000000</TextAddressRange>
             <DataAddressRange>0x20000000</DataAddressRange>
-            <pXoBase></pXoBase>
+            <pXoBase />
             <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
-            <IncludeLibs></IncludeLibs>
-            <IncludeLibsPath></IncludeLibsPath>
+            <IncludeLibs />
+            <IncludeLibsPath />
             <Misc> --keep *.o(.rti_fn.*)   --keep *.o(FSymTab)</Misc>
-            <LinkerInputFile></LinkerInputFile>
-            <DisabledWarnings></DisabledWarnings>
+            <LinkerInputFile />
+            <DisabledWarnings />
           </LDads>
         </TargetArmAds>
       </TargetOption>
@@ -387,71 +384,99 @@
               <FileType>1</FileType>
               <FilePath>..\..\..\src\clock.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>components.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\components.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>cpu.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\cpu.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>device.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\device.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>idle.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\idle.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>ipc.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\ipc.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>irq.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\irq.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>kservice.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\kservice.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>mem.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\mem.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>mempool.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\mempool.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>object.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\object.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>scheduler.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\scheduler.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>signal.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\signal.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>thread.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\src\thread.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>timer.c</FileName>
               <FileType>1</FileType>
@@ -477,26 +502,43 @@
               <FileType>1</FileType>
               <FilePath>board\board.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32l4xx_hal_msp.c</FileName>
               <FileType>1</FileType>
               <FilePath>board\CubeMX_Config\Src\stm32l4xx_hal_msp.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>startup_stm32l476xx.s</FileName>
               <FileType>2</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\arm\startup_stm32l476xx.s</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>drv_gpio.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>drv_usart.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
             </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>drv_soft_i2c.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\HAL_Drivers\drv_soft_i2c.c</FilePath>
+            </File>
+          </Files>
+          <Files>
             <File>
               <FileName>drv_common.c</FileName>
               <FileType>1</FileType>
@@ -512,21 +554,29 @@
               <FileType>1</FileType>
               <FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>div0.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\libcpu\arm\common\div0.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>showmem.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>cpuport.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\libcpu\arm\cortex-m4\cpuport.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>context_rvds.S</FileName>
               <FileType>2</FileType>
@@ -536,47 +586,91 @@
         </Group>
         <Group>
           <GroupName>DeviceDrivers</GroupName>
+          <Files>
+            <File>
+              <FileName>i2c_core.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\i2c\i2c_core.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>i2c_dev.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\i2c\i2c_dev.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>i2c-bit-ops.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\i2c\i2c-bit-ops.c</FilePath>
+            </File>
+          </Files>
           <Files>
             <File>
               <FileName>pin.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\misc\pin.c</FilePath>
             </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>rtc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\rtc\rtc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
             <File>
               <FileName>serial.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\serial\serial.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>completion.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\src\completion.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>dataqueue.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\src\dataqueue.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>pipe.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\src\pipe.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>ringblk_buf.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\src\ringblk_buf.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>ringbuffer.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\src\ringbuffer.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>waitqueue.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\src\waitqueue.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>workqueue.c</FileName>
               <FileType>1</FileType>
@@ -592,26 +686,36 @@
               <FileType>1</FileType>
               <FilePath>..\..\..\components\finsh\shell.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>symbol.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\finsh\symbol.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>cmd.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\finsh\cmd.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>msh.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\finsh\msh.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>msh_cmd.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\finsh\msh_cmd.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>msh_file.c</FileName>
               <FileType>1</FileType>
@@ -619,6 +723,44 @@
             </File>
           </Files>
         </Group>
+        <Group>
+          <GroupName>libc</GroupName>
+          <Files>
+            <File>
+              <FileName>libc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\libc\compilers\armlibc\libc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>mem_std.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\libc\compilers\armlibc\mem_std.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stubs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\libc\compilers\armlibc\stubs.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>time.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\libc\compilers\armlibc\time.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>gmtime_r.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\libc\compilers\common\gmtime_r.c</FilePath>
+            </File>
+          </Files>
+        </Group>
         <Group>
           <GroupName>STM32_HAL</GroupName>
           <Files>
@@ -627,121 +769,189 @@
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\CMSIS\Device\ST\STM32L4xx\Source\Templates\system_stm32l4xx.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32l4xx_hal.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32l4xx_hal_comp.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_comp.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32l4xx_hal_cortex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cortex.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32l4xx_hal_crc.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32l4xx_hal_crc_ex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_crc_ex.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32l4xx_hal_cryp.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32l4xx_hal_cryp_ex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_cryp_ex.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32l4xx_hal_dma.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32l4xx_hal_dma_ex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_dma_ex.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32l4xx_hal_exti.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_exti.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32l4xx_hal_pwr.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32l4xx_hal_pwr_ex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_pwr_ex.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32l4xx_hal_rcc.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32l4xx_hal_rcc_ex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rcc_ex.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32l4xx_hal_rng.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rng.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32l4xx_hal_sram.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_sram.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32l4xx_hal_gpio.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_gpio.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32l4xx_hal_uart.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32l4xx_hal_uart_ex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_uart_ex.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32l4xx_hal_usart.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart.c</FilePath>
             </File>
+          </Files>
+          <Files>
             <File>
               <FileName>stm32l4xx_hal_usart_ex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_usart_ex.c</FilePath>
             </File>
           </Files>
+          <Files>
+            <File>
+              <FileName>stm32l4xx_hal_i2c.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32l4xx_hal_i2c_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_i2c_ex.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32l4xx_hal_rtc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rtc.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>stm32l4xx_hal_rtc_ex.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\STM32L4xx_HAL\STM32L4xx_HAL_Driver\Src\stm32l4xx_hal_rtc_ex.c</FilePath>
+            </File>
+          </Files>
         </Group>
       </Groups>
     </Target>
   </Targets>
-
   <RTE>
-    <apis/>
-    <components/>
-    <files/>
+    <apis />
+    <components />
+    <files />
   </RTE>
-
 </Project>

bsp/stm32/stm32l476-st-nucleo/rtconfig.h

@@ -38,7 +38,7 @@
 #define RT_USING_CONSOLE
 #define RT_CONSOLEBUF_SIZE 256
 #define RT_CONSOLE_DEVICE_NAME "uart2"
-#define RT_VER_NUM 0x40000
+#define RT_VER_NUM 0x40001
 #define ARCH_ARM
 #define ARCH_ARM_CORTEX_M
 #define ARCH_ARM_CORTEX_M4
@@ -88,6 +88,7 @@
 
 /* POSIX layer and C standard library */
 
+#define RT_USING_LIBC
 
 /* Network */