update Fujitsu FM3 lcd.c

undefined RT_DEBUG in bsp/fm3/mb9bf500r/rtconfig.h
add Fujitsu MB9BF500R config files for IAR 

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1498 bbd45198-f89e-11dd-88c7-29a3b14d5316

bsp/fm3/mb9bf500r/lcd.c

@@ -22,38 +22,35 @@ const unsigned char BIT_MASK[8] = {0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, 0x0
 /* simple font: ' ', '0'~'9','a'~'z','A'~'Z' */
 extern const unsigned char  FONTTYPE8_8[][8];
 
-rt_uint32_t x;
-rt_uint32_t y;
-
-void Power_Delay(void)
+void power_delay(void)
 {
-    rt_uint32_t i=0x4ffff;
+    rt_uint32_t i = 0x4ffff;
     while(i--)
-        ;//asm("nop");
+        ;
 }
 
-void Delay(void)
+void delay(void)
 {
-    rt_uint8_t i=0x8;
+    rt_uint8_t i = 0x8;
     while(i--)
-        ;//asm("nop");
+        ;
 }
 
-void Reset_Delay(void)
+void reset_delay(void)
 {
-    rt_uint8_t i=0xff;
+    rt_uint8_t i = 0xff;
     while(i--)
-        ;//asm("nop");
+        ;
 }
 
-void LCD_WriteCmd(unsigned char command)
+void lcd_write_cmd(unsigned char command)
 {
     rt_uint8_t i;
 
     LCD_PS_LOW();
     LCD_CS_LOW();
     LCD_CD_LOW();
-    for(i=0; i<8; i++)
+    for (i=0; i<8; i++)
     {
         if (command & (0x80 >> i))
             LCD_DATA_HIGH();
@@ -61,21 +58,21 @@ void LCD_WriteCmd(unsigned char command)
             LCD_DATA_LOW();
             
         LCD_CLK_LOW();
-        Delay();
+        delay();
         LCD_CLK_HIGH();
-        Delay();
+        delay();
     }
     LCD_CS_HIGH();
 }
 
-void LCD_WriteData(unsigned char data)
+void lcd_write_data(unsigned char data)
 {
     rt_uint8_t i;
 
     LCD_PS_LOW();
     LCD_CS_LOW();
     LCD_CD_HIGH();
-    for(i=0; i<8; i++)
+    for (i=0; i<8; i++)
     {
         if (data & (0x80 >> i))
             LCD_DATA_HIGH();
@@ -83,9 +80,9 @@ void LCD_WriteData(unsigned char data)
             LCD_DATA_LOW();
         
         LCD_CLK_LOW();
-        Delay();
+        delay();
         LCD_CLK_HIGH();
-        Delay();
+        delay();
     }
     LCD_CS_HIGH();
 }
@@ -94,21 +91,21 @@ void LCD_WriteData(unsigned char data)
 #include <rtgui/driver.h>
 #include <rtgui/color.h>
 
-static void rt_hw_lcd_update(rtgui_rect_t *rect)
+static void rt_hw_lcd_update(struct rt_device_rect_info *rect_info)
 {
     rt_uint8_t i,j = GUI_LCM_XMAX;
     rt_uint8_t* p = (rt_uint8_t*)gui_disp_buf;  
     
     for (i=0; i<GUI_LCM_PAGE; i++)
     { 
-        LCD_WriteCmd(Set_Page_Addr_0|i);    
-        LCD_WriteCmd(Set_ColH_Addr_0);        
-        LCD_WriteCmd(Set_ColL_Addr_0);
+        lcd_write_cmd(SET_PAGE_ADDR_0|i);    
+        lcd_write_cmd(SET_COLH_ADDR_0);        
+        lcd_write_cmd(SET_COLL_ADDR_0);
         j = GUI_LCM_XMAX;
         while (j--)
         {
-            LCD_WriteData(*p++);
-            Delay();
+            lcd_write_data(*p++);
+            delay();
         }
     }
 }
@@ -181,14 +178,14 @@ static void rt_hw_lcd_draw_raw_hline(rt_uint8_t *pixels, int x1, int x2, int y)
         gui_disp_buf[page][i] |= 1<<(y%8);
         coll = i & 0x0f;
         colh = i >> 4;
-        LCD_WriteCmd(Set_Page_Addr_0 | page);
-        LCD_WriteCmd(Set_ColH_Addr_0 | colh);
-        LCD_WriteCmd(Set_ColL_Addr_0 | coll);
-        LCD_WriteData(gui_disp_buf[page][i]);
+        lcd_write_cmd(SET_PAGE_ADDR_0 | page);
+        lcd_write_cmd(SET_COLH_ADDR_0 | colh);
+        lcd_write_cmd(SET_COLL_ADDR_0 | coll);
+        lcd_write_data(gui_disp_buf[page][i]);
     }
 }
 
-const struct rtgui_graphic_driver_ops _lcd_driver =
+const struct rtgui_graphic_driver_ops _lcd_ops =
 {
     rt_hw_lcd_set_pixel,
     rt_hw_lcd_get_pixel,
@@ -229,57 +226,57 @@ static rt_err_t rt_lcd_init (rt_device_t dev)
 {
     lcd_io_init();
     
-    Power_Delay();
-    LCD_WriteCmd(Display_Off);
-    Reset_Delay();
+    power_delay();
+    lcd_write_cmd(DISPLAY_OFF);
+    reset_delay();
     // Resetting circuit
-    LCD_WriteCmd(Reset_LCD);
-    Reset_Delay();
+    lcd_write_cmd(RESET_LCD);
+    reset_delay();
     // LCD bias setting
-    LCD_WriteCmd(Set_LCD_Bias_9);
-    Reset_Delay();
+    lcd_write_cmd(SET_LCD_BIAS_9);
+    reset_delay();
     // ADC selection: display from left to right
-    LCD_WriteCmd(Set_ADC_Normal);        
-    Reset_Delay();
+    lcd_write_cmd(SET_ADC_NORMAL);        
+    reset_delay();
     // Common output state selection: display from up to down
-    LCD_WriteCmd(COM_Scan_Dir_Reverse);
-    Reset_Delay();
+    lcd_write_cmd(COM_SCAN_DIR_REVERSE);
+    reset_delay();
       
-    LCD_WriteCmd(Power_Booster_On);
-    Power_Delay(); // 50ms requried
-    LCD_WriteCmd(Power_Regulator_On);
-    Power_Delay(); // 50ms
-    LCD_WriteCmd(Power_Follower_On);
-    Power_Delay(); // 50ms
+    lcd_write_cmd(POWER_BOOSTER_ON);
+    power_delay(); // 50ms requried
+    lcd_write_cmd(POWER_REGULATOR_ON);
+    power_delay(); // 50ms
+    lcd_write_cmd(POWER_FOLLOWER_ON);
+    power_delay(); // 50ms
       
     // Setting the built-in resistance radio for regulation of the V0 voltage
     // Electronic volume control
     // Power control setting
-    LCD_WriteCmd(Set_ElecVol_Reg|0x05);
-    Delay();
-    LCD_WriteCmd(Set_ElecVol_Mode);
-    Delay();
-    LCD_WriteCmd(Set_ElecVol_Reg);
-    Delay();
+    lcd_write_cmd(SET_ELECVOL_REG|0x05);
+    delay();
+    lcd_write_cmd(SET_ELECVOL_MODE);
+    delay();
+    lcd_write_cmd(SET_ELECVOL_REG);
+    delay();
     //  LCD_Clear();
-    Delay();
-    LCD_WriteCmd(Set_Page_Addr_0);
-    Delay();
-    LCD_WriteCmd(Set_ColH_Addr_0);
-    Delay();
-    LCD_WriteCmd(Set_ColL_Addr_0);
-    Delay();
-    LCD_WriteCmd(Display_On);
-    Delay();
+    delay();
+    lcd_write_cmd(SET_PAGE_ADDR_0);
+    delay();
+    lcd_write_cmd(SET_COLH_ADDR_0);
+    delay();
+    lcd_write_cmd(SET_COLL_ADDR_0);
+    delay();
+    lcd_write_cmd(DISPLAY_ON);
+    delay();
       
-    LCD_WriteCmd(Display_All_On);
-    Delay();
-    LCD_WriteCmd(Display_Off);
-    Delay();
-    LCD_WriteCmd(Display_On);
-    Delay();
-    LCD_WriteCmd(Display_All_Normal);
-    Delay();
+    lcd_write_cmd(DISPLAY_ALL_ON);
+    delay();
+    lcd_write_cmd(DISPLAY_OFF);
+    delay();
+    lcd_write_cmd(DISPLAY_ON);
+    delay();
+    lcd_write_cmd(DISPLAY_ALL_NORMAL);
+    delay();
     
     return RT_EOK;
 }
@@ -298,14 +295,14 @@ void LCD_FillAll(unsigned char*	buffer)
 	
   for (i=0; i<GUI_LCM_PAGE; i++)
   { 
-    LCD_WriteCmd(Set_Page_Addr_0|i);	
-    LCD_WriteCmd(Set_ColH_Addr_0);		
-    LCD_WriteCmd(Set_ColL_Addr_0);
+    lcd_write_cmd(SET_PAGE_ADDR_0|i);	
+    lcd_write_cmd(SET_COLH_ADDR_0);		
+    lcd_write_cmd(SET_COLL_ADDR_0);
     j = GUI_LCM_XMAX;
     while (j--)
     {
-      LCD_WriteData(*p++);
-      Delay();
+      lcd_write_data(*p++);
+      delay();
     }
   }
 }
@@ -345,10 +342,10 @@ void  LCD_UpdatePoint(unsigned int x, unsigned int y)
   coll = x & 0x0f;
   colh = x >> 4;
 	
-  LCD_WriteCmd(Set_Page_Addr_0 | page);	        // page no.
-  LCD_WriteCmd(Set_ColH_Addr_0 | colh);		// fixed col first addr
-  LCD_WriteCmd(Set_ColL_Addr_0 | coll);
-  LCD_WriteData(gui_disp_buf[page][x]);
+  lcd_write_cmd(SET_PAGE_ADDR_0 | page);	        // page no.
+  lcd_write_cmd(SET_COLH_ADDR_0 | colh);		// fixed col first addr
+  lcd_write_cmd(SET_COLL_ADDR_0 | coll);
+  lcd_write_data(gui_disp_buf[page][x]);
 }
 
 /****************************************************************************
@@ -459,7 +456,7 @@ void rt_hw_lcd_init(void)
 	lcd->close = RT_NULL;
 	lcd->control = rt_lcd_control;
 #ifdef RT_USING_RTGUI
-	lcd->user_data = (void*)&_lcd_driver;
+	lcd->user_data = (void*)&_lcd_ops;
 #endif	
 	/* register lcd device to RT-Thread */
 	rt_device_register(lcd, "lcd", RT_DEVICE_FLAG_RDWR);

bsp/fm3/mb9bf500r/lcd.h

@@ -10,6 +10,7 @@
  * Change Logs:
  * Date           Author       Notes
  * 2008-03-29     Yi.Qiu
+ * 2011-06-13     lgnq         modified for FM3 easy kit
  */
 #ifndef __LCD_H__
 #define __LCD_H__
@@ -28,80 +29,80 @@ LCD_C86		PORT1.1
 LCD_PS		PORT1.0
 LCD_DATA[0..7]		PORT5.[0..7]
 ***********************************************/
-#define LCD_CS                    (1UL << 7)
-#define LCD_CS_DDR                (FM3_GPIO->DDR1)
-#define LCD_CS_PFR                (FM3_GPIO->PFR1)
-#define LCD_CS_PDOR               (FM3_GPIO->PDOR1)
-
-#define LCD_CD                    (1UL << 6)
-#define LCD_CD_DDR                (FM3_GPIO->DDR1)
-#define LCD_CD_PFR                (FM3_GPIO->PFR1)
-#define LCD_CD_PDOR               (FM3_GPIO->PDOR1)
-
-#define LCD_PS                    (1UL << 0)
-#define LCD_PS_DDR                (FM3_GPIO->DDR1)
-#define LCD_PS_PFR                (FM3_GPIO->PFR1)
-#define LCD_PS_PDOR               (FM3_GPIO->PDOR1)
-
-#define LCD_CLK                   (1UL << 6)
-#define LCD_CLK_DDR               (FM3_GPIO->DDR5)
-#define LCD_CLK_PFR               (FM3_GPIO->PFR5)
-#define LCD_CLK_PDOR              (FM3_GPIO->PDOR5)
-
-#define LCD_DATA                  (1UL << 7)
-#define LCD_DATA_DDR              (FM3_GPIO->DDR5)
-#define LCD_DATA_PFR              (FM3_GPIO->PFR5)
-#define LCD_DATA_PDOR             (FM3_GPIO->PDOR5)
+#define LCD_CS					(1UL << 7)
+#define LCD_CS_DDR				(FM3_GPIO->DDR1)
+#define LCD_CS_PFR				(FM3_GPIO->PFR1)
+#define LCD_CS_PDOR				(FM3_GPIO->PDOR1)
+
+#define LCD_CD					(1UL << 6)
+#define LCD_CD_DDR				(FM3_GPIO->DDR1)
+#define LCD_CD_PFR				(FM3_GPIO->PFR1)
+#define LCD_CD_PDOR				(FM3_GPIO->PDOR1)
+
+#define LCD_PS					(1UL << 0)
+#define LCD_PS_DDR				(FM3_GPIO->DDR1)
+#define LCD_PS_PFR				(FM3_GPIO->PFR1)
+#define LCD_PS_PDOR				(FM3_GPIO->PDOR1)
+
+#define LCD_CLK					(1UL << 6)
+#define LCD_CLK_DDR				(FM3_GPIO->DDR5)
+#define LCD_CLK_PFR				(FM3_GPIO->PFR5)
+#define LCD_CLK_PDOR			(FM3_GPIO->PDOR5)
+
+#define LCD_DATA				(1UL << 7)
+#define LCD_DATA_DDR			(FM3_GPIO->DDR5)
+#define LCD_DATA_PFR			(FM3_GPIO->PFR5)
+#define LCD_DATA_PDOR			(FM3_GPIO->PDOR5)
 
 /* LCD driver for ZYMG12864C3 */
-#define LCD_WIDTH 128
-#define LCD_HEIGHT 64
+#define LCD_WIDTH				128
+#define LCD_HEIGHT				64
 
 // Driver the LCD with Parallel or serial interface and the command/data control pin is gpio
-#define LCD_CS_HIGH()             LCD_CS_PDOR  |=  LCD_CS
-#define LCD_CS_LOW()              LCD_CS_PDOR  &= ~LCD_CS
+#define LCD_CS_HIGH()			LCD_CS_PDOR  |=  LCD_CS
+#define LCD_CS_LOW()			LCD_CS_PDOR  &= ~LCD_CS
 
-#define LCD_CD_HIGH()             LCD_CD_PDOR |=  LCD_CD
-#define LCD_CD_LOW()              LCD_CD_PDOR &= ~LCD_CD
+#define LCD_CD_HIGH()			LCD_CD_PDOR |=  LCD_CD
+#define LCD_CD_LOW()			LCD_CD_PDOR &= ~LCD_CD
 
-#define LCD_PS_HIGH()             LCD_PS_PDOR |=  LCD_PS
-#define LCD_PS_LOW()              LCD_PS_PDOR &= ~LCD_PS
+#define LCD_PS_HIGH()			LCD_PS_PDOR |=  LCD_PS
+#define LCD_PS_LOW()			LCD_PS_PDOR &= ~LCD_PS
 
-#define LCD_CLK_HIGH()            LCD_CLK_PDOR |=  LCD_CLK
-#define LCD_CLK_LOW()             LCD_CLK_PDOR &= ~LCD_CLK
+#define LCD_CLK_HIGH()			LCD_CLK_PDOR |=  LCD_CLK
+#define LCD_CLK_LOW()			LCD_CLK_PDOR &= ~LCD_CLK
 
-#define LCD_DATA_HIGH()           LCD_DATA_PDOR |=  LCD_DATA
-#define LCD_DATA_LOW()            LCD_DATA_PDOR &= ~LCD_DATA
+#define LCD_DATA_HIGH()			LCD_DATA_PDOR |=  LCD_DATA
+#define LCD_DATA_LOW()			LCD_DATA_PDOR &= ~LCD_DATA
 
 // define the arrtibute of ZYMG12864(LCM)
-#define GUI_LCM_XMAX 					128		// defined the lcd's line-number is 128 
-#define GUI_LCM_YMAX 					64		// defined the lcd's column-number is 64
-#define GUI_LCM_PAGE					8		// defined the lcd's page-number is 8(GUI_LCM_YMAX/8)
+#define GUI_LCM_XMAX 			128		// defined the lcd's line-number is 128 
+#define GUI_LCM_YMAX 			64		// defined the lcd's column-number is 64
+#define GUI_LCM_PAGE			8		// defined the lcd's page-number is 8(GUI_LCM_YMAX/8)
 
 /* set LCD command */
-#define Display_On					0xAF	// A0,RD,WR:010
-#define Display_Off					0xAE	// A0,RD,WR:010
-
-#define Set_Start_Line_0		0x40	// A0,RD,WR:010; line0~line63
-#define Set_Page_Addr_0			0xB0	// A0,RD,WR:010; addr0~addr8
-#define Set_ColH_Addr_0			0x10	// A0,RD,WR:010; 
-#define Set_ColL_Addr_0			0x00	// A0,RD,WR:010; addr0~addr131
-
-#define Read_Status				    0x-0	// A0,RD,WR:001; BUSY | ADC | ON/OFF |  RESET | 0 0 0 0
-#define Status_Busy						0x80
-#define Status_ADC_Reverse		0x40	// column address 131-n : SEG n, else column address n : SEG n
-#define Status_Display_Off		0x20
-#define Status_Reset					0x80
-
-#define Write_Data				0x--	// A0,RD,WR:110
-#define Read_Date					0x--	// A0,RD,WR:101; spi mode is unavailable
-
-#define Set_ADC_Normal				0xA0	// A0,RD,WR:010
-#define Set_ADC_Reverse				0xA1	// A0,RD,WR:010
-#define Display_Normal				0xA6	// A0,RD,WR:010
-#define Display_Reverse				0xA7	// A0,RD,WR:010; reverse color
-#define Display_All_On				0xA5	// A0,RD,WR:010
-#define Display_All_Normal		0xA4	// A0,RD,WR:010
+#define DISPLAY_ON				0xAF	// A0,RD,WR:010
+#define DISPLAY_OFF				0xAE	// A0,RD,WR:010
+
+#define SET_START_LINE_0		0x40	// A0,RD,WR:010; line0~line63
+#define SET_PAGE_ADDR_0			0xB0	// A0,RD,WR:010; addr0~addr8
+#define SET_COLH_ADDR_0			0x10	// A0,RD,WR:010; 
+#define SET_COLL_ADDR_0			0x00	// A0,RD,WR:010; addr0~addr131
+
+#define READ_STATUS				0x-0	// A0,RD,WR:001; BUSY | ADC | ON/OFF |  RESET | 0 0 0 0
+#define STATUS_BUSY				0x80
+#define STATUS_ADC_REVERSE		0x40	// column address 131-n : SEG n, else column address n : SEG n
+#define STATUS_DISPLAY_OFF		0x20
+#define STATUS_RESET			0x80
+
+#define WRITE_DATA				0x--	// A0,RD,WR:110
+#define READ_DATE				0x--	// A0,RD,WR:101; spi mode is unavailable
+
+#define SET_ADC_NORMAL			0xA0	// A0,RD,WR:010
+#define SET_ADC_REVERSE			0xA1	// A0,RD,WR:010
+#define DISPLAY_NORMAL			0xA6	// A0,RD,WR:010
+#define DISPLAY_REVERSE			0xA7	// A0,RD,WR:010; reverse color
+#define DISPLAY_ALL_ON			0xA5	// A0,RD,WR:010
+#define DISPLAY_ALL_NORMAL		0xA4	// A0,RD,WR:010
 
 /*************************************************************
 *	bias:	1/65duty | 1/49duty | 1/33duty | 1/55duty | 1/53duty *
@@ -110,12 +111,12 @@ LCD_DATA[0..7]		PORT5.[0..7]
 *	A3:		1/7 bias | 1/6 bias | 1/5 bias | 1/6 bias | 1/6 bias *
 **************************************************************/
 
-#define Set_LCD_Bias_7    		0xA3	// A0,RD,WR:010
-#define Set_LCD_Bias_9    		0xA2	// A0,RD,WR:010
+#define SET_LCD_BIAS_7    		0xA3	// A0,RD,WR:010
+#define SET_LCD_BIAS_9    		0xA2	// A0,RD,WR:010
 
-#define RMW_Mode_Enable   		0xE0	// A0,RD,WR:010; the column address locked when read command operating
-#define RMW_Mode_End		  		0xEE	// A0,RD,WR:010; returns to the column address when RMW was entered.
-#define Reset_LCD         		0xE2	// A0,RD,WR:010
+#define RMW_MODE_ENABLE   		0xE0	// A0,RD,WR:010; the column address locked when read command operating
+#define RMW_MODE_END		  	0xEE	// A0,RD,WR:010; returns to the column address when RMW was entered.
+#define RESET_LCD         		0xE2	// A0,RD,WR:010
 
 
 /**************************************************************************************
@@ -125,30 +126,30 @@ LCD_DATA[0..7]		PORT5.[0..7]
 *	C8:		Reverse	|	COM63:COM0	|	COM47:COM0	|	COM31:COM0	|	COM53:COM0	|	COM51:COM0	*
 ***************************************************************************************/
 
-#define COM_Scan_Dir_Normal 	   0xC0	// A0,RD,WR:010
-#define COM_Scan_Dir_Reverse     0xC8	// A0,RD,WR:010
+#define COM_SCAN_DIR_NORMAL		0xC0	// A0,RD,WR:010
+#define COM_SCAN_DIR_REVERSE	0xC8	// A0,RD,WR:010
 
 // 0 0 1 0 1 | Booster On | Regulator On | Follower On
-#define Power_Booster_On			0x2C	// A0,RD,WR:010
-#define Power_Regulator_On		0x2E	// A0,RD,WR:010
-#define Power_Follower_On			0x2F	// A0,RD,WR:010
+#define POWER_BOOSTER_ON		0x2C	// A0,RD,WR:010
+#define POWER_REGULATOR_ON		0x2E	// A0,RD,WR:010
+#define POWER_FOLLOWER_ON		0x2F	// A0,RD,WR:010
 
-#define Set_Resistor_Ratio		0x20	// A0,RD,WR:010; 20~27:small~large
+#define SET_RESISTOR_RATIO		0x20	// A0,RD,WR:010; 20~27:small~large
 
-#define Set_ElecVol_Mode		0x81	// A0,RD,WR:010; double byte command
-#define Set_ElecVol_Reg			0x20	// A0,RD,WR:010; the electronic volume(64 voltage levels:00~3F) function is not used.
+#define SET_ELECVOL_MODE		0x81	// A0,RD,WR:010; double byte command
+#define SET_ELECVOL_REG			0x20	// A0,RD,WR:010; the electronic volume(64 voltage levels:00~3F) function is not used.
 
-#define Sleep_Mode_Enable			0xAC	// A0,RD,WR:010; double byte command, preceding command
-#define Sleep_Mode_Disable		0xAD	// A0,RD,WR:010; preceding command
-#define Sleep_Mode_Deliver		0x00	// A0,RD,WR:010; following command
+#define SLEEP_MODE_ENABLE		0xAC	// A0,RD,WR:010; double byte command, preceding command
+#define SLEEP_MODE_DISABLE		0xAD	// A0,RD,WR:010; preceding command
+#define SLEEP_MODE_DELIVER		0x00	// A0,RD,WR:010; following command
 
-#define Boost_Ratio_Set			0xF8	// A0,RD,WR:010; double byte command, preceding command
-#define Boost_Ratio_234			0x00	// A0,RD,WR:010; following command
-#define Boost_Ratio_5				0x01	// A0,RD,WR:010; following command
-#define Boost_Ratio_6				0x03	// A0,RD,WR:010; following command
+#define BOOST_RATIO_SET			0xF8	// A0,RD,WR:010; double byte command, preceding command
+#define BOOST_RATIO_234			0x00	// A0,RD,WR:010; following command
+#define BOOST_RATIO_5			0x01	// A0,RD,WR:010; following command
+#define BOOST_RATIO_6			0x03	// A0,RD,WR:010; following command
 
-#define Command_Nop					0xE3	// A0,RD,WR:010
-#define Command_IC_Test			0xFC	// A0,RD,WR:010; don't use
+#define COMMAND_NOP				0xE3	// A0,RD,WR:010
+#define COMMAND_IC_TEST			0xFC	// A0,RD,WR:010; don't use
 
 #define RT_DEVICE_CTRL_LCD_GET_WIDTH			0
 #define RT_DEVICE_CTRL_LCD_GET_HEIGHT			1
@@ -173,11 +174,11 @@ enum
 
 struct lcd_msg
 {
-	rt_uint8_t type;
-	rt_uint16_t adc_value;
-	rt_uint8_t key;
-	rt_uint16_t major;
-	rt_uint16_t minor;
+	rt_uint8_t	type;
+	rt_uint16_t	adc_value;
+	rt_uint8_t	key;
+	rt_uint16_t	major;
+	rt_uint16_t	minor;
 };
 
 extern rt_uint32_t x;

bsp/fm3/mb9bf500r/rtconfig.h

@@ -16,7 +16,7 @@
 
 /* SECTION: RT_DEBUG */
 /* Thread Debug */
-#define RT_DEBUG
+/* #define RT_DEBUG */
 #define RT_USING_OVERFLOW_CHECK
 
 /* Using Hook */