Merge pull request #3557 from yangjie11/yangjie

[bsp][stm32l475-atk-pandora]将SPI3配置为 transmit only master 模式，防止LCD模块使…

bsp/stm32/stm32l475-atk-pandora/board/CubeMX_Config/STM32L475VE.ioc

@@ -1,366 +1,363 @@
 #MicroXplorer Configuration settings - do not modify
-ADC1.Channel-15\#ChannelRegularConversion=ADC_CHANNEL_14
-ADC1.IPParameters=Rank-15\#ChannelRegularConversion,Channel-15\#ChannelRegularConversion,SamplingTime-15\#ChannelRegularConversion,OffsetNumber-15\#ChannelRegularConversion,NbrOfConversionFlag,master
-ADC1.NbrOfConversionFlag=1
-ADC1.OffsetNumber-15\#ChannelRegularConversion=ADC_OFFSET_NONE
-ADC1.Rank-15\#ChannelRegularConversion=1
-ADC1.SamplingTime-15\#ChannelRegularConversion=ADC_SAMPLETIME_2CYCLES_5
-ADC1.master=1
-File.Version=6
-KeepUserPlacement=false
 Mcu.Family=STM32L4
-Mcu.IP0=ADC1
-Mcu.IP1=IWDG
-Mcu.IP10=SPI2
-Mcu.IP11=SPI3
-Mcu.IP12=SYS
-Mcu.IP13=TIM1
-Mcu.IP14=TIM2
-Mcu.IP15=TIM4
-Mcu.IP16=TIM15
-Mcu.IP17=TIM16
-Mcu.IP18=TIM17
-Mcu.IP19=USART1
-Mcu.IP2=LPTIM1
-Mcu.IP20=USART2
-Mcu.IP21=USB_OTG_FS
-Mcu.IP3=NVIC
+ProjectManager.MainLocation=Src
+PA6.Mode=Full_Duplex_Master
+SH.S_TIM4_CH2.ConfNb=1
+RCC.USART1Freq_Value=80000000
+RCC.SAI1Freq_Value=13714285.714285715
+USART2.IPParameters=VirtualMode-Asynchronous
+RCC.CortexFreq_Value=80000000
+SPI3.Direction=SPI_DIRECTION_2LINES
+VP_TIM17_VS_ClockSourceINT.Mode=Enable_Timer
+SPI3.VirtualType=VM_MASTER
+ProjectManager.KeepUserCode=true
+Mcu.UserName=STM32L475VETx
+SPI1.VirtualType=VM_MASTER
+SPI2.VirtualType=VM_MASTER
+PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN
+TIM1.IPParameters=Channel-PWM Generation1 CH1
+PC10.Signal=SDMMC1_D2
+PC12.Signal=SDMMC1_CK
+VP_IWDG_VS_IWDG.Mode=IWDG_Activate
+RCC.PLLSAI1RoutputFreq_Value=48000000
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_USART2_UART_Init-USART2-false-HAL-true,5-MX_QUADSPI_Init-QUADSPI-false-HAL-true,6-MX_SPI1_Init-SPI1-false-HAL-true,7-MX_SPI2_Init-SPI2-false-HAL-true,8-MX_RTC_Init-RTC-false-HAL-true,9-MX_ADC1_Init-ADC1-false-HAL-true,10-MX_IWDG_Init-IWDG-false-HAL-true,11-MX_TIM17_Init-TIM17-false-HAL-true,12-MX_TIM16_Init-TIM16-false-HAL-true,13-MX_TIM15_Init-TIM15-false-HAL-true,14-MX_TIM4_Init-TIM4-false-HAL-true,15-MX_TIM1_Init-TIM1-false-HAL-true,16-MX_SAI1_Init-SAI1-false-HAL-true,17-MX_SPI3_Init-SPI3-false-HAL-true,18-MX_TIM2_Init-TIM2-false-HAL-true,19-MX_USB_OTG_FS_PCD_Init-USB_OTG_FS-false-HAL-true
+SAI1.VirtualProtocol-SAI_A_BASIC=VM_BASIC_PROTOCOL
+VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
+SAI1.Instance-SAI_A_MasterWithClock=SAI$Index_Block_A
+PA11.Mode=Device_Only
+RCC.RTCFreq_Value=32768
+RCC.USART2Freq_Value=80000000
+PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator
+SH.S_TIM1_CH1.ConfNb=1
+USART1.IPParameters=VirtualMode-Asynchronous
+PB11.Signal=S_TIM2_CH4
+PB13.Signal=SPI2_SCK
+PB15.Signal=SPI2_MOSI
+PinOutPanel.RotationAngle=0
+RCC.MCO1PinFreq_Value=80000000
+RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
+ProjectManager.StackSize=0x400
+PB3\ (JTDO-TRACESWO).Signal=SPI3_SCK
+PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator
+PA14\ (JTCK-SWCLK).Signal=SYS_JTCK-SWCLK
+RCC.I2C3Freq_Value=80000000
+RCC.LPTIM1Freq_Value=80000000
 Mcu.IP4=QUADSPI
 Mcu.IP5=RCC
-Mcu.IP6=RTC
-Mcu.IP7=SAI1
-Mcu.IP8=SDMMC1
-Mcu.IP9=SPI1
+RCC.FCLKCortexFreq_Value=80000000
+Mcu.IP2=LPTIM1
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+Mcu.IP3=NVIC
+Mcu.IP0=ADC1
+Mcu.IP1=IWDG
+PA12.Signal=USB_OTG_FS_DP
+Mcu.UserConstants=
+PE11.Mode=Single Bank
+RCC.VCOSAI1OutputFreq_Value=96000000
+SAI1.VirtualMode-SAI_B_SyncSlave=VM_SLAVE
+RCC.SDMMCFreq_Value=48000000
+Mcu.ThirdPartyNb=0
+SPI1.Direction=SPI_DIRECTION_2LINES
+RCC.HCLKFreq_Value=80000000
+PE2.Mode=SAI_A_MasterWithClock
 Mcu.IPNb=22
-Mcu.Name=STM32L475V(C-E-G)Tx
-Mcu.Package=LQFP100
+TIM2.IPParameters=Channel-PWM Generation3 CH3,Channel-PWM Generation4 CH4
+ProjectManager.PreviousToolchain=
+RCC.APB2TimFreq_Value=80000000
+VP_SAI1_VP_$IpInstance_SAIB_SAI_BASIC.Signal=SAI1_VP_$IpInstance_SAIB_SAI_BASIC
+SPI1.CalculateBaudRate=40.0 MBits/s
+Mcu.Pin6=PC15-OSC32_OUT (PC15)
+RCC.SAI2Freq_Value=13714285.714285715
+Mcu.Pin7=PH0-OSC_IN (PH0)
+VP_TIM2_VS_ClockSourceINT.Signal=TIM2_VS_ClockSourceINT
+Mcu.Pin8=PH1-OSC_OUT (PH1)
+PE5.Signal=SAI1_SCK_A
+Mcu.Pin9=PA2
+RCC.AHBFreq_Value=80000000
+PB13.Locked=true
 Mcu.Pin0=PE2
+PE14.Locked=true
 Mcu.Pin1=PE3
-Mcu.Pin10=PA3
-Mcu.Pin11=PA5
-Mcu.Pin12=PA6
-Mcu.Pin13=PA7
-Mcu.Pin14=PC5
-Mcu.Pin15=PE9
-Mcu.Pin16=PE10
-Mcu.Pin17=PE11
-Mcu.Pin18=PE12
-Mcu.Pin19=PE13
 Mcu.Pin2=PE4
-Mcu.Pin20=PE14
-Mcu.Pin21=PE15
-Mcu.Pin22=PB10
-Mcu.Pin23=PB11
-Mcu.Pin24=PB13
-Mcu.Pin25=PB14
-Mcu.Pin26=PB15
-Mcu.Pin27=PC8
-Mcu.Pin28=PC9
-Mcu.Pin29=PA9
 Mcu.Pin3=PE5
-Mcu.Pin30=PA10
-Mcu.Pin31=PA11
-Mcu.Pin32=PA12
-Mcu.Pin33=PA13 (JTMS-SWDIO)
-Mcu.Pin34=PA14 (JTCK-SWCLK)
-Mcu.Pin35=PC10
-Mcu.Pin36=PC11
-Mcu.Pin37=PC12
-Mcu.Pin38=PD2
-Mcu.Pin39=PB3 (JTDO-TRACESWO)
+RCC.USART3Freq_Value=80000000
 Mcu.Pin4=PE6
-Mcu.Pin40=PB4 (NJTRST)
-Mcu.Pin41=PB5
-Mcu.Pin42=PB7
-Mcu.Pin43=PB8
-Mcu.Pin44=VP_IWDG_VS_IWDG
-Mcu.Pin45=VP_LPTIM1_VS_LPTIM_counterModeInternalClock
-Mcu.Pin46=VP_RTC_VS_RTC_Activate
-Mcu.Pin47=VP_SAI1_VP_$IpInstance_SAIA_SAI_BASIC
-Mcu.Pin48=VP_SAI1_VP_$IpInstance_SAIB_SAI_BASIC
-Mcu.Pin49=VP_SYS_VS_Systick
 Mcu.Pin5=PC14-OSC32_IN (PC14)
-Mcu.Pin50=VP_TIM1_VS_ClockSourceINT
-Mcu.Pin51=VP_TIM2_VS_ClockSourceINT
-Mcu.Pin52=VP_TIM4_VS_ClockSourceINT
-Mcu.Pin53=VP_TIM15_VS_ClockSourceINT
-Mcu.Pin54=VP_TIM16_VS_ClockSourceINT
-Mcu.Pin55=VP_TIM17_VS_ClockSourceINT
-Mcu.Pin6=PC15-OSC32_OUT (PC15)
-Mcu.Pin7=PH0-OSC_IN (PH0)
-Mcu.Pin8=PH1-OSC_OUT (PH1)
-Mcu.Pin9=PA2
-Mcu.PinsNb=56
-Mcu.ThirdPartyNb=0
-Mcu.UserConstants=
-Mcu.UserName=STM32L475VETx
-MxCube.Version=5.6.0
-MxDb.Version=DB.5.0.60
-NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+ProjectManager.ProjectBuild=false
+PH1-OSC_OUT\ (PH1).Mode=HSE-External-Oscillator
+RCC.HSE_VALUE=8000000
+TIM4.Channel-PWM\ Generation3\ CH3=TIM_CHANNEL_3
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-NVIC.ForceEnableDMAVector=true
-NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-NVIC.OTG_FS_IRQn=true\:0\:0\:false\:false\:true\:true\:true
-NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
-NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+SH.ADCx_IN14.ConfNb=1
+Mcu.IP10=SPI2
+USART2.VirtualMode-Asynchronous=VM_ASYNC
 NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
-NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-PA10.Mode=Asynchronous
-PA10.Signal=USART1_RX
-PA11.Mode=Device_Only
-PA11.Signal=USB_OTG_FS_DM
-PA12.Mode=Device_Only
-PA12.Signal=USB_OTG_FS_DP
-PA13\ (JTMS-SWDIO).Mode=Serial_Wire
-PA13\ (JTMS-SWDIO).Signal=SYS_JTMS-SWDIO
-PA14\ (JTCK-SWCLK).Mode=Serial_Wire
-PA14\ (JTCK-SWCLK).Signal=SYS_JTCK-SWCLK
-PA2.Mode=Asynchronous
-PA2.Signal=USART2_TX
-PA3.Mode=Asynchronous
-PA3.Signal=USART2_RX
-PA5.Mode=Full_Duplex_Master
-PA5.Signal=SPI1_SCK
-PA6.Mode=Full_Duplex_Master
-PA6.Signal=SPI1_MISO
-PA7.Mode=Full_Duplex_Master
-PA7.Signal=SPI1_MOSI
-PA9.Mode=Asynchronous
-PA9.Signal=USART1_TX
-PB10.Signal=S_TIM2_CH3
-PB11.Signal=S_TIM2_CH4
-PB13.Locked=true
-PB13.Mode=Full_Duplex_Master
-PB13.Signal=SPI2_SCK
-PB14.Locked=true
+RCC.RTCClockSelection=RCC_RTCCLKSOURCE_LSE
+Mcu.IP12=SYS
+Mcu.IP11=SPI3
+ADC1.OffsetNumber-15\#ChannelRegularConversion=ADC_OFFSET_NONE
+Mcu.IP18=TIM17
+ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.15.1
+Mcu.IP17=TIM16
+MxDb.Version=DB.5.0.60
+PE15.Locked=true
+Mcu.IP19=USART1
+Mcu.IP14=TIM2
+Mcu.IP13=TIM1
+PE13.Signal=QUADSPI_BK1_IO1
+Mcu.IP16=TIM15
+ProjectManager.BackupPrevious=false
+Mcu.IP15=TIM4
+RCC.VCOInputFreq_Value=8000000
+TIM1.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
+PE9.Signal=S_TIM1_CH1
 PB14.Mode=Full_Duplex_Master
-PB14.Signal=SPI2_MISO
-PB15.Locked=true
-PB15.Mode=Full_Duplex_Master
-PB15.Signal=SPI2_MOSI
-PB3\ (JTDO-TRACESWO).Locked=true
-PB3\ (JTDO-TRACESWO).Mode=Full_Duplex_Master
-PB3\ (JTDO-TRACESWO).Signal=SPI3_SCK
-PB4\ (NJTRST).Mode=Full_Duplex_Master
-PB4\ (NJTRST).Signal=SPI3_MISO
-PB5.Locked=true
-PB5.Mode=Full_Duplex_Master
-PB5.Signal=SPI3_MOSI
-PB7.Locked=true
+PB5.Mode=TX_Only_Simplex_Unidirect_Master
+File.Version=6
+PC9.Mode=SD_4_bits_Wide_bus
+SPI2.CalculateBaudRate=40.0 MBits/s
+SAI1.InitProtocol-SAI_A_MasterWithClock=Enable
+SH.S_TIM4_CH2.0=TIM4_CH2,PWM Generation2 CH2
+PE2.Signal=SAI1_MCLK_A
 PB7.Signal=S_TIM4_CH2
+Mcu.IP21=USB_OTG_FS
 PB8.Locked=true
-PB8.Signal=S_TIM4_CH3
-PC10.Mode=SD_4_bits_Wide_bus
-PC10.Signal=SDMMC1_D2
-PC11.Mode=SD_4_bits_Wide_bus
-PC11.Signal=SDMMC1_D3
-PC12.Mode=SD_4_bits_Wide_bus
-PC12.Signal=SDMMC1_CK
-PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator
-PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN
-PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator
-PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT
-PC5.Signal=ADCx_IN14
-PC8.Mode=SD_4_bits_Wide_bus
-PC8.Signal=SDMMC1_D0
-PC9.Mode=SD_4_bits_Wide_bus
-PC9.Signal=SDMMC1_D1
-PD2.Mode=SD_4_bits_Wide_bus
-PD2.Signal=SDMMC1_CMD
-PE10.Mode=Single Bank
-PE10.Signal=QUADSPI_CLK
-PE11.Mode=Single Bank
-PE11.Signal=QUADSPI_NCS
-PE12.Locked=true
-PE12.Mode=Single Bank
-PE12.Signal=QUADSPI_BK1_IO0
-PE13.Locked=true
+Mcu.IP20=USART2
+RCC.PLLRCLKFreq_Value=80000000
 PE13.Mode=Single Bank
-PE13.Signal=QUADSPI_BK1_IO1
-PE14.Locked=true
-PE14.Mode=Single Bank
-PE14.Signal=QUADSPI_BK1_IO2
-PE15.Locked=true
-PE15.Mode=Single Bank
-PE15.Signal=QUADSPI_BK1_IO3
-PE2.Mode=SAI_A_MasterWithClock
-PE2.Signal=SAI1_MCLK_A
-PE3.Mode=SAI_B_SyncSlave
-PE3.Signal=SAI1_SD_B
+NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
 PE4.Mode=SAI_A_MasterWithClock
+ADC1.Channel-15\#ChannelRegularConversion=ADC_CHANNEL_14
 PE4.Signal=SAI1_FS_A
-PE5.Mode=SAI_A_MasterWithClock
-PE5.Signal=SAI1_SCK_A
-PE6.Mode=SAI_A_MasterWithClock
-PE6.Signal=SAI1_SD_A
-PE9.Signal=S_TIM1_CH1
-PH0-OSC_IN\ (PH0).Mode=HSE-External-Oscillator
-PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN
-PH1-OSC_OUT\ (PH1).Mode=HSE-External-Oscillator
-PH1-OSC_OUT\ (PH1).Signal=RCC_OSC_OUT
-PinOutPanel.RotationAngle=0
-ProjectManager.AskForMigrate=true
-ProjectManager.BackupPrevious=false
-ProjectManager.CompilerOptimize=6
-ProjectManager.ComputerToolchain=false
-ProjectManager.CoupleFile=false
-ProjectManager.CustomerFirmwarePackage=
-ProjectManager.DefaultFWLocation=true
-ProjectManager.DeletePrevious=true
-ProjectManager.DeviceId=STM32L475VETx
-ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.15.1
-ProjectManager.FreePins=false
+PE10.Signal=QUADSPI_CLK
+VP_TIM15_VS_ClockSourceINT.Signal=TIM15_VS_ClockSourceINT
 ProjectManager.HalAssertFull=false
-ProjectManager.HeapSize=0x200
-ProjectManager.KeepUserCode=true
-ProjectManager.LastFirmware=true
-ProjectManager.LibraryCopy=0
-ProjectManager.MainLocation=Src
-ProjectManager.NoMain=false
-ProjectManager.PreviousToolchain=
-ProjectManager.ProjectBuild=false
-ProjectManager.ProjectFileName=STM32L475VE.ioc
+VP_TIM1_VS_ClockSourceINT.Mode=Internal
 ProjectManager.ProjectName=STM32L475VE
-ProjectManager.StackSize=0x400
-ProjectManager.TargetToolchain=MDK-ARM V5
+ADC1.Rank-15\#ChannelRegularConversion=1
+SAI1.OutputDrive-SAI_A_MasterWithClock=SAI_OUTPUTDRIVE_ENABLE
+Mcu.Package=LQFP100
+SAI1.AudioFrequency-SAI_A_MasterWithClock=SAI_AUDIO_FREQUENCY_44K
+PA6.Signal=SPI1_MISO
+SPI2.Mode=SPI_MODE_MASTER
+SPI3.Mode=SPI_MODE_MASTER
+SH.ADCx_IN14.0=ADC1_IN14,IN14-Single-Ended
+NVIC.OTG_FS_IRQn=true\:0\:0\:false\:false\:true\:true\:true
 ProjectManager.ToolChainLocation=
-ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_USART2_UART_Init-USART2-false-HAL-true,5-MX_QUADSPI_Init-QUADSPI-false-HAL-true,6-MX_SPI1_Init-SPI1-false-HAL-true,7-MX_SPI2_Init-SPI2-false-HAL-true,8-MX_RTC_Init-RTC-false-HAL-true,9-MX_ADC1_Init-ADC1-false-HAL-true,10-MX_IWDG_Init-IWDG-false-HAL-true,11-MX_TIM17_Init-TIM17-false-HAL-true,12-MX_TIM16_Init-TIM16-false-HAL-true,13-MX_TIM15_Init-TIM15-false-HAL-true,14-MX_TIM4_Init-TIM4-false-HAL-true,15-MX_TIM1_Init-TIM1-false-HAL-true,16-MX_SAI1_Init-SAI1-false-HAL-true,17-MX_SPI3_Init-SPI3-false-HAL-true,18-MX_TIM2_Init-TIM2-false-HAL-true,19-MX_USB_OTG_FS_PCD_Init-USB_OTG_FS-false-HAL-true
-RCC.ADCFreq_Value=48000000
-RCC.AHBFreq_Value=80000000
-RCC.APB1Freq_Value=80000000
-RCC.APB1TimFreq_Value=80000000
-RCC.APB2Freq_Value=80000000
-RCC.APB2TimFreq_Value=80000000
-RCC.CortexFreq_Value=80000000
-RCC.DFSDMFreq_Value=80000000
-RCC.FCLKCortexFreq_Value=80000000
-RCC.FamilyName=M
-RCC.HCLKFreq_Value=80000000
-RCC.HSE_VALUE=8000000
-RCC.HSI_VALUE=16000000
-RCC.I2C1Freq_Value=80000000
-RCC.I2C2Freq_Value=80000000
-RCC.I2C3Freq_Value=80000000
-RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,DFSDMFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1N,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSAI2PoutputFreq_Value,PLLSAI2RoutputFreq_Value,PLLSourceVirtual,PWRFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value,VCOSAI2OutputFreq_Value
-RCC.LPTIM1Freq_Value=80000000
-RCC.LPTIM2Freq_Value=80000000
-RCC.LPUART1Freq_Value=80000000
-RCC.LSCOPinFreq_Value=32000
 RCC.LSI_VALUE=32000
-RCC.MCO1PinFreq_Value=80000000
-RCC.MSI_VALUE=4000000
-RCC.PLLN=20
+VP_LPTIM1_VS_LPTIM_counterModeInternalClock.Mode=Counts__internal_clock_event_00
+VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+RCC.LSCOPinFreq_Value=32000
+PA10.Signal=USART1_RX
+USB_OTG_FS.VirtualMode=Device_Only
+RCC.DFSDMFreq_Value=80000000
+PC11.Mode=SD_4_bits_Wide_bus
+ADC1.SamplingTime-15\#ChannelRegularConversion=ADC_SAMPLETIME_2CYCLES_5
 RCC.PLLPoutputFreq_Value=22857142.85714286
-RCC.PLLQoutputFreq_Value=80000000
-RCC.PLLRCLKFreq_Value=80000000
+RCC.APB1TimFreq_Value=80000000
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+RCC.LPUART1Freq_Value=80000000
+SPI3.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
+SPI2.Direction=SPI_DIRECTION_2LINES
+PC5.Signal=ADCx_IN14
+USB_OTG_FS.IPParameters=VirtualMode
+PB13.Mode=Full_Duplex_Master
+SH.S_TIM2_CH4.ConfNb=1
+PA13\ (JTMS-SWDIO).Signal=SYS_JTMS-SWDIO
+PH0-OSC_IN\ (PH0).Mode=HSE-External-Oscillator
+PE12.Locked=true
+PE3.Mode=SAI_B_SyncSlave
+ProjectManager.CustomerFirmwarePackage=
+PB15.Locked=true
+PB3\ (JTDO-TRACESWO).Locked=true
 RCC.PLLSAI1N=12
-RCC.PLLSAI1PoutputFreq_Value=13714285.714285715
-RCC.PLLSAI1QoutputFreq_Value=48000000
-RCC.PLLSAI1RoutputFreq_Value=48000000
-RCC.PLLSAI2PoutputFreq_Value=9142857.142857144
-RCC.PLLSAI2RoutputFreq_Value=32000000
+PA3.Signal=USART2_RX
+PA5.Mode=Full_Duplex_Master
+PE12.Mode=Single Bank
+VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
+RCC.MSI_VALUE=4000000
 RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
-RCC.PWRFreq_Value=80000000
-RCC.RNGFreq_Value=48000000
-RCC.RTCClockSelection=RCC_RTCCLKSOURCE_LSE
-RCC.RTCFreq_Value=32768
-RCC.SAI1Freq_Value=13714285.714285715
-RCC.SAI2Freq_Value=13714285.714285715
-RCC.SDMMCFreq_Value=48000000
+PA14\ (JTCK-SWCLK).Mode=Serial_Wire
+RCC.PLLQoutputFreq_Value=80000000
+ProjectManager.ProjectFileName=STM32L475VE.ioc
+TIM2.Channel-PWM\ Generation4\ CH4=TIM_CHANNEL_4
+PA7.Mode=Full_Duplex_Master
+PA10.Mode=Asynchronous
+Mcu.PinsNb=55
+VP_SAI1_VP_$IpInstance_SAIA_SAI_BASIC.Mode=SAI_A_BASIC
+ProjectManager.NoMain=false
+SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
+ADC1.IPParameters=Rank-15\#ChannelRegularConversion,Channel-15\#ChannelRegularConversion,SamplingTime-15\#ChannelRegularConversion,OffsetNumber-15\#ChannelRegularConversion,NbrOfConversionFlag,master
+SAI1.MClockEnable-SAI_A_MasterWithClock=SAI_MASTERCLOCK_ENABLE
+PC11.Signal=SDMMC1_D3
 RCC.SWPMI1Freq_Value=80000000
-RCC.SYSCLKFreq_VALUE=80000000
-RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
-RCC.UART4Freq_Value=80000000
-RCC.UART5Freq_Value=80000000
-RCC.USART1Freq_Value=80000000
-RCC.USART2Freq_Value=80000000
-RCC.USART3Freq_Value=80000000
-RCC.USBFreq_Value=48000000
-RCC.VCOInputFreq_Value=8000000
-RCC.VCOOutputFreq_Value=160000000
-RCC.VCOSAI1OutputFreq_Value=96000000
-RCC.VCOSAI2OutputFreq_Value=64000000
-SAI1.AudioFrequency-SAI_A_MasterWithClock=SAI_AUDIO_FREQUENCY_44K
+PC8.Signal=SDMMC1_D0
+PE10.Mode=Single Bank
+PC10.Mode=SD_4_bits_Wide_bus
+VP_SAI1_VP_$IpInstance_SAIA_SAI_BASIC.Signal=SAI1_VP_$IpInstance_SAIA_SAI_BASIC
+ProjectManager.DefaultFWLocation=true
 SAI1.ErrorAudioFreq-SAI_A_MasterWithClock=-72.09 %
-SAI1.IPParameters=Instance-SAI_A_MasterWithClock,VirtualMode-SAI_A_MasterWithClock,MClockEnable-SAI_A_MasterWithClock,RealAudioFreq-SAI_A_MasterWithClock,ErrorAudioFreq-SAI_A_MasterWithClock,InitProtocol-SAI_A_MasterWithClock,VirtualProtocol-SAI_A_BASIC,AudioFrequency-SAI_A_MasterWithClock,OutputDrive-SAI_A_MasterWithClock,Instance-SAI_B_SyncSlave,VirtualMode-SAI_B_SyncSlave,InitProtocol-SAI_B_SyncSlave,VirtualProtocol-SAI_B_BASIC
-SAI1.InitProtocol-SAI_A_MasterWithClock=Enable
-SAI1.InitProtocol-SAI_B_SyncSlave=Enable
-SAI1.Instance-SAI_A_MasterWithClock=SAI$Index_Block_A
-SAI1.Instance-SAI_B_SyncSlave=SAI$Index_Block_B
-SAI1.MClockEnable-SAI_A_MasterWithClock=SAI_MASTERCLOCK_ENABLE
-SAI1.OutputDrive-SAI_A_MasterWithClock=SAI_OUTPUTDRIVE_ENABLE
+PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT
+VP_TIM16_VS_ClockSourceINT.Mode=Enable_Timer
+ProjectManager.DeletePrevious=true
+PB14.Locked=true
+RCC.VCOSAI2OutputFreq_Value=64000000
+VP_TIM17_VS_ClockSourceINT.Signal=TIM17_VS_ClockSourceINT
+RCC.FamilyName=M
+PH1-OSC_OUT\ (PH1).Signal=RCC_OSC_OUT
+USART1.VirtualMode-Asynchronous=VM_ASYNC
+PA3.Mode=Asynchronous
 SAI1.RealAudioFreq-SAI_A_MasterWithClock=53.571 KHz
-SAI1.VirtualMode-SAI_A_MasterWithClock=VM_MASTER
-SAI1.VirtualMode-SAI_B_SyncSlave=VM_SLAVE
-SAI1.VirtualProtocol-SAI_A_BASIC=VM_BASIC_PROTOCOL
-SAI1.VirtualProtocol-SAI_B_BASIC=VM_BASIC_PROTOCOL
-SH.ADCx_IN14.0=ADC1_IN14,IN14-Single-Ended
-SH.ADCx_IN14.ConfNb=1
+PA9.Mode=Asynchronous
 SH.S_TIM1_CH1.0=TIM1_CH1,PWM Generation1 CH1
-SH.S_TIM1_CH1.ConfNb=1
-SH.S_TIM2_CH3.0=TIM2_CH3,PWM Generation3 CH3
-SH.S_TIM2_CH3.ConfNb=1
-SH.S_TIM2_CH4.0=TIM2_CH4,PWM Generation4 CH4
-SH.S_TIM2_CH4.ConfNb=1
-SH.S_TIM4_CH2.0=TIM4_CH2,PWM Generation2 CH2
-SH.S_TIM4_CH2.ConfNb=1
+VP_TIM4_VS_ClockSourceINT.Signal=TIM4_VS_ClockSourceINT
+ProjectManager.TargetToolchain=MDK-ARM V5
+TIM4.IPParameters=Channel-PWM Generation3 CH3,Channel-PWM Generation2 CH2
+Mcu.Pin51=VP_TIM4_VS_ClockSourceINT
+Mcu.Pin52=VP_TIM15_VS_ClockSourceINT
+Mcu.Pin50=VP_TIM2_VS_ClockSourceINT
 SH.S_TIM4_CH3.0=TIM4_CH3,PWM Generation3 CH3
-SH.S_TIM4_CH3.ConfNb=1
-SPI1.CalculateBaudRate=40.0 MBits/s
-SPI1.Direction=SPI_DIRECTION_2LINES
-SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
-SPI1.Mode=SPI_MODE_MASTER
-SPI1.VirtualType=VM_MASTER
-SPI2.CalculateBaudRate=40.0 MBits/s
-SPI2.Direction=SPI_DIRECTION_2LINES
+Mcu.Pin53=VP_TIM16_VS_ClockSourceINT
+Mcu.Pin54=VP_TIM17_VS_ClockSourceINT
+PA9.Signal=USART1_TX
+VP_TIM1_VS_ClockSourceINT.Signal=TIM1_VS_ClockSourceINT
+PB5.Locked=true
 SPI2.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
-SPI2.Mode=SPI_MODE_MASTER
-SPI2.VirtualType=VM_MASTER
+RCC.USBFreq_Value=48000000
+PE11.Signal=QUADSPI_NCS
+Mcu.Pin48=VP_SYS_VS_Systick
+Mcu.Pin49=VP_TIM1_VS_ClockSourceINT
+RCC.PLLSAI1PoutputFreq_Value=13714285.714285715
+Mcu.Pin46=VP_SAI1_VP_$IpInstance_SAIA_SAI_BASIC
+Mcu.Pin47=VP_SAI1_VP_$IpInstance_SAIB_SAI_BASIC
+PB10.Signal=S_TIM2_CH3
+SAI1.VirtualMode-SAI_A_MasterWithClock=VM_MASTER
+SH.S_TIM4_CH3.ConfNb=1
+VP_SAI1_VP_$IpInstance_SAIB_SAI_BASIC.Mode=SAI_B_BASIC
+PB14.Signal=SPI2_MISO
+PD2.Mode=SD_4_bits_Wide_bus
+RCC.PLLSAI2RoutputFreq_Value=32000000
+PA5.Signal=SPI1_SCK
+Mcu.Pin40=PB5
+Mcu.Pin41=PB7
+PC12.Mode=SD_4_bits_Wide_bus
+Mcu.Pin44=VP_LPTIM1_VS_LPTIM_counterModeInternalClock
+Mcu.Pin45=VP_RTC_VS_RTC_Activate
+Mcu.Pin42=PB8
+board=custom
+Mcu.Pin43=VP_IWDG_VS_IWDG
+SAI1.IPParameters=Instance-SAI_A_MasterWithClock,VirtualMode-SAI_A_MasterWithClock,MClockEnable-SAI_A_MasterWithClock,RealAudioFreq-SAI_A_MasterWithClock,ErrorAudioFreq-SAI_A_MasterWithClock,InitProtocol-SAI_A_MasterWithClock,VirtualProtocol-SAI_A_BASIC,AudioFrequency-SAI_A_MasterWithClock,OutputDrive-SAI_A_MasterWithClock,Instance-SAI_B_SyncSlave,VirtualMode-SAI_B_SyncSlave,InitProtocol-SAI_B_SyncSlave,VirtualProtocol-SAI_B_BASIC
+RCC.VCOOutputFreq_Value=160000000
+ProjectManager.LastFirmware=true
+PB15.Mode=Full_Duplex_Master
+TIM4.Channel-PWM\ Generation2\ CH2=TIM_CHANNEL_2
+RCC.APB2Freq_Value=80000000
+PE14.Signal=QUADSPI_BK1_IO2
+RCC.UART4Freq_Value=80000000
 SPI3.CalculateBaudRate=40.0 MBits/s
-SPI3.Direction=SPI_DIRECTION_2LINES
-SPI3.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate
-SPI3.Mode=SPI_MODE_MASTER
-SPI3.VirtualType=VM_MASTER
-TIM1.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
-TIM1.IPParameters=Channel-PWM Generation1 CH1
+PE6.Mode=SAI_A_MasterWithClock
+PE15.Signal=QUADSPI_BK1_IO3
+MxCube.Version=5.6.0
+Mcu.Pin37=PC12
+Mcu.Pin38=PD2
+Mcu.Pin35=PC10
+VP_TIM2_VS_ClockSourceINT.Mode=Internal
+RCC.I2C1Freq_Value=80000000
+SH.S_TIM2_CH3.0=TIM2_CH3,PWM Generation3 CH3
+Mcu.Pin36=PC11
+SPI1.Mode=SPI_MODE_MASTER
+Mcu.Pin39=PB3 (JTDO-TRACESWO)
+PE14.Mode=Single Bank
+PB3\ (JTDO-TRACESWO).Mode=TX_Only_Simplex_Unidirect_Master
+RCC.RNGFreq_Value=48000000
+PE5.Mode=SAI_A_MasterWithClock
+RCC.PLLSAI1QoutputFreq_Value=48000000
+Mcu.Pin30=PA10
+RCC.ADCFreq_Value=48000000
+VP_SYS_VS_Systick.Mode=SysTick
 TIM2.Channel-PWM\ Generation3\ CH3=TIM_CHANNEL_3
-TIM2.Channel-PWM\ Generation4\ CH4=TIM_CHANNEL_4
-TIM2.IPParameters=Channel-PWM Generation3 CH3,Channel-PWM Generation4 CH4
-TIM4.Channel-PWM\ Generation2\ CH2=TIM_CHANNEL_2
-TIM4.Channel-PWM\ Generation3\ CH3=TIM_CHANNEL_3
-TIM4.IPParameters=Channel-PWM Generation3 CH3,Channel-PWM Generation2 CH2
-USART1.IPParameters=VirtualMode-Asynchronous
-USART1.VirtualMode-Asynchronous=VM_ASYNC
-USART2.IPParameters=VirtualMode-Asynchronous
-USART2.VirtualMode-Asynchronous=VM_ASYNC
-USB_OTG_FS.IPParameters=VirtualMode
-USB_OTG_FS.VirtualMode=Device_Only
-VP_IWDG_VS_IWDG.Mode=IWDG_Activate
+Mcu.Pin33=PA13 (JTMS-SWDIO)
+Mcu.Pin34=PA14 (JTCK-SWCLK)
+Mcu.Pin31=PA11
+Mcu.Pin32=PA12
+VP_TIM16_VS_ClockSourceINT.Signal=TIM16_VS_ClockSourceINT
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+SH.S_TIM2_CH3.ConfNb=1
+PE6.Signal=SAI1_SD_A
+RCC.UART5Freq_Value=80000000
+ProjectManager.FreePins=false
+RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,DFSDMFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1N,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSAI2PoutputFreq_Value,PLLSAI2RoutputFreq_Value,PLLSourceVirtual,PWRFreq_Value,RNGFreq_Value,RTCClockSelection,RTCFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value,VCOSAI2OutputFreq_Value
+ProjectManager.AskForMigrate=true
+Mcu.Name=STM32L475V(C-E-G)Tx
+RCC.LPTIM2Freq_Value=80000000
+Mcu.Pin26=PB15
+PE12.Signal=QUADSPI_BK1_IO0
+Mcu.Pin27=PC8
+PA2.Signal=USART2_TX
+Mcu.Pin24=PB13
+ProjectManager.UnderRoot=false
+Mcu.Pin25=PB14
+PE13.Locked=true
+Mcu.IP8=SDMMC1
+Mcu.IP9=SPI1
+Mcu.Pin28=PC9
+Mcu.IP6=RTC
+PC8.Mode=SD_4_bits_Wide_bus
+Mcu.Pin29=PA9
+Mcu.IP7=SAI1
+ProjectManager.CoupleFile=false
+PA13\ (JTMS-SWDIO).Mode=Serial_Wire
+RCC.SYSCLKFreq_VALUE=80000000
+Mcu.Pin22=PB10
+PB5.Signal=SPI3_MOSI
+Mcu.Pin23=PB11
+Mcu.Pin20=PE14
+ADC1.master=1
+Mcu.Pin21=PE15
+PA12.Mode=Device_Only
+NVIC.ForceEnableDMAVector=true
+RCC.PLLSAI2PoutputFreq_Value=9142857.142857144
+KeepUserPlacement=false
+PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+ProjectManager.CompilerOptimize=6
+SAI1.Instance-SAI_B_SyncSlave=SAI$Index_Block_B
+PA11.Signal=USB_OTG_FS_DM
 VP_IWDG_VS_IWDG.Signal=IWDG_VS_IWDG
-VP_LPTIM1_VS_LPTIM_counterModeInternalClock.Mode=Counts__internal_clock_event_00
-VP_LPTIM1_VS_LPTIM_counterModeInternalClock.Signal=LPTIM1_VS_LPTIM_counterModeInternalClock
-VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled
-VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate
-VP_SAI1_VP_$IpInstance_SAIA_SAI_BASIC.Mode=SAI_A_BASIC
-VP_SAI1_VP_$IpInstance_SAIA_SAI_BASIC.Signal=SAI1_VP_$IpInstance_SAIA_SAI_BASIC
-VP_SAI1_VP_$IpInstance_SAIB_SAI_BASIC.Mode=SAI_B_BASIC
-VP_SAI1_VP_$IpInstance_SAIB_SAI_BASIC.Signal=SAI1_VP_$IpInstance_SAIB_SAI_BASIC
-VP_SYS_VS_Systick.Mode=SysTick
-VP_SYS_VS_Systick.Signal=SYS_VS_Systick
 VP_TIM15_VS_ClockSourceINT.Mode=Internal
-VP_TIM15_VS_ClockSourceINT.Signal=TIM15_VS_ClockSourceINT
-VP_TIM16_VS_ClockSourceINT.Mode=Enable_Timer
-VP_TIM16_VS_ClockSourceINT.Signal=TIM16_VS_ClockSourceINT
-VP_TIM17_VS_ClockSourceINT.Mode=Enable_Timer
-VP_TIM17_VS_ClockSourceINT.Signal=TIM17_VS_ClockSourceINT
-VP_TIM1_VS_ClockSourceINT.Mode=Internal
-VP_TIM1_VS_ClockSourceINT.Signal=TIM1_VS_ClockSourceINT
-VP_TIM2_VS_ClockSourceINT.Mode=Internal
-VP_TIM2_VS_ClockSourceINT.Signal=TIM2_VS_ClockSourceINT
+ProjectManager.HeapSize=0x200
+Mcu.Pin15=PE9
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+Mcu.Pin16=PE10
+Mcu.Pin13=PA7
+SH.S_TIM2_CH4.0=TIM2_CH4,PWM Generation4 CH4
+Mcu.Pin14=PC5
+Mcu.Pin19=PE13
+ProjectManager.ComputerToolchain=false
+Mcu.Pin17=PE11
+RCC.HSI_VALUE=16000000
+Mcu.Pin18=PE12
 VP_TIM4_VS_ClockSourceINT.Mode=Internal
-VP_TIM4_VS_ClockSourceINT.Signal=TIM4_VS_ClockSourceINT
-board=custom
+SAI1.VirtualProtocol-SAI_B_BASIC=VM_BASIC_PROTOCOL
+NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
+ADC1.NbrOfConversionFlag=1
+Mcu.Pin11=PA5
+Mcu.Pin12=PA6
+RCC.PLLN=20
+Mcu.Pin10=PA3
+PB7.Locked=true
+PE3.Signal=SAI1_SD_B
+PA2.Mode=Asynchronous
+PB8.Signal=S_TIM4_CH3
+VP_LPTIM1_VS_LPTIM_counterModeInternalClock.Signal=LPTIM1_VS_LPTIM_counterModeInternalClock
+RCC.PWRFreq_Value=80000000
+PC9.Signal=SDMMC1_D1
+PD2.Signal=SDMMC1_CMD
+RCC.I2C2Freq_Value=80000000
+RCC.APB1Freq_Value=80000000
+SAI1.InitProtocol-SAI_B_SyncSlave=Enable
+ProjectManager.DeviceId=STM32L475VETx
+ProjectManager.LibraryCopy=0
+PE15.Mode=Single Bank
+PA7.Signal=SPI1_MOSI

bsp/stm32/stm32l475-atk-pandora/board/CubeMX_Config/Src/stm32l4xx_hal_msp.c

@@ -478,10 +478,9 @@ void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
     __HAL_RCC_GPIOB_CLK_ENABLE();
     /**SPI3 GPIO Configuration    
     PB3 (JTDO-TRACESWO)     ------> SPI3_SCK
-    PB4 (NJTRST)     ------> SPI3_MISO
     PB5     ------> SPI3_MOSI 
     */
-    GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5;
+    GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_5;
     GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
     GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
@@ -551,10 +550,9 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
   
     /**SPI3 GPIO Configuration    
     PB3 (JTDO-TRACESWO)     ------> SPI3_SCK
-    PB4 (NJTRST)     ------> SPI3_MISO
     PB5     ------> SPI3_MOSI 
     */
-    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5);
+    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_3|GPIO_PIN_5);
 
   /* USER CODE BEGIN SPI3_MspDeInit 1 */