增加双网口配置选项，增加phy8211F 驱动 (#6278)

* Update Kconfig

增加RT1170双路网络选项

* Update SConscript

增加RTL8211F驱动选项支持

* Update SConstruct

去掉外设目录

* Add files via upload

增加PHY芯片RTL8211F驱动

* Update drv_rtl8211f.c

* format code

Co-authored-by: Meco Man <920369182@qq.com>

bsp/imxrt/imxrt1021-nxp-evk/SConstruct

@@ -66,8 +66,5 @@ objs.extend(SConscript(os.path.join(libraries_path_prefix, imxrt_library, 'SCons
 # include drivers
 objs.extend(SConscript(os.path.join(libraries_path_prefix, 'drivers', 'SConscript')))
 
-# include peripherals
-objs.extend(SConscript(os.path.join(libraries_path_prefix, 'peripherals', 'SConscript')))
-
 # make a building
 DoBuilding(TARGET, objs)

bsp/imxrt/imxrt1021-nxp-evk/applications/SConscript

@@ -6,17 +6,17 @@ cwd = GetCurrentDir()
 src = Glob('*.c')
 CPPPATH = [cwd]
 
-# add for startup script 
+# add for startup script
 if rtconfig.CROSS_TOOL == 'gcc':
     CPPDEFINES = ['__START=entry']
 else:
     CPPDEFINES = []
-    
+
 group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES=CPPDEFINES)
 
 list = os.listdir(cwd)
 for item in list:
     if os.path.isfile(os.path.join(cwd, item, 'SConscript')):
         group = group + SConscript(os.path.join(item, 'SConscript'))
-        
+
 Return('group')

bsp/imxrt/imxrt1021-nxp-evk/board/Kconfig

@@ -3,19 +3,19 @@ menu "Hardware Drivers"
 config BSP_USING_QSPIFLASH
     bool
     default y
-	
+
 config SOC_IMXRT1021DAG5A
-    bool 
+    bool
     select SOC_MIMXRT1020_SERIES
-	select RT_USING_COMPONENTS_INIT
+    select RT_USING_COMPONENTS_INIT
     select RT_USING_USER_MAIN
-	select SOC_IMXRT1020_SERIES
+    select SOC_IMXRT1020_SERIES
     default y
 
 
 menu "On-chip Peripheral Drivers"
 
-	config BSP_USING_DMA
+    config BSP_USING_DMA
         bool "Enable DMA"
         default n
 
@@ -23,7 +23,7 @@ menu "On-chip Peripheral Drivers"
         bool "Enable GPIO"
         select RT_USING_PIN
         default y
-		
+
     menuconfig BSP_USING_CAN
         bool "Enable CAN"
         select RT_USING_CAN
@@ -39,7 +39,7 @@ menu "On-chip Peripheral Drivers"
         bool "Enable UART"
         select RT_USING_SERIAL
         default y
-        
+
         if BSP_USING_LPUART
             config BSP_USING_LPUART1
                 bool "Enable LPUART1"
@@ -69,19 +69,19 @@ menu "On-chip Peripheral Drivers"
                         int "Set LPUART1 TX DMA channel (0-32)"
                         default 1
         endif
-	menuconfig BSP_USING_HWTIMER
-			bool "Enable GPT"
-			default n
-			select RT_USING_HWTIMER
-			if BSP_USING_TIM
-				config BSP_USING_HWTIMER1
-					bool "Enable GPT1"
-					default n
-
-				config BSP_USING_HWTIMER2
-					bool "Enable GPT2"
-					default n
-			endif
+    menuconfig BSP_USING_HWTIMER
+            bool "Enable GPT"
+            default n
+            select RT_USING_HWTIMER
+            if BSP_USING_TIM
+                config BSP_USING_HWTIMER1
+                    bool "Enable GPT1"
+                    default n
+
+                config BSP_USING_HWTIMER2
+                    bool "Enable GPT2"
+                    default n
+            endif
     menuconfig BSP_USING_PWM
         bool "Enable PWM"
         default n
@@ -138,7 +138,7 @@ menu "On-chip Peripheral Drivers"
             config BSP_USING_ADC1
                 bool "Enable ADC1"
                 default n
-        endif		
+        endif
     config BSP_USING_RTC
         bool "Enable RTC"
         select RT_USING_RTC
@@ -147,47 +147,47 @@ menu "On-chip Peripheral Drivers"
 endmenu
 
 menu "Onboard Peripheral Drivers"
-	config BSP_USING_RGB
-			bool "Enable RGB LED (PWM1_CH3A, PWM4_CH0A and PWM4_CH1A)"
-			select BSP_USING_PWM1
-			select BSP_USING_PWM4
-			select BSP_USING_PWM1_CH3
-			select BSP_USING_PWM4_CH0
-			select BSP_USING_PWM4_CH1
-			default n
-
-		config BSP_USING_MPU6050
-			bool "Enable MPU6050 (I2C1:J11 --> SCL; K11 --> SDA)"
-			select BSP_USING_I2C1
-			select PKG_USING_MPU6XXX
-			default n
-
-		menuconfig BSP_USING_AP3216C
-			bool "Enable AP3216C (I2C1:J11 --> SCL; K11 --> SDA)"
-			select BSP_USING_I2C1
-			select PKG_USING_AP3216C
-			default n
-			if BSP_USING_AP3216C
-				config AP3216C_USING_HW_INT
-				bool "Enable interrupt"
-				default n
-			endif
-
-		config BSP_USING_EEPROM
-			bool "Enable I2C EEPROM (I2C1:J11 --> SCL; K11 --> SDA)"
-			select BSP_USING_I2C1
-			select  PKG_USING_AT24CXX
-			default n
-
-		config BSP_USING_RS232
-			bool "Enable RS232"
-			select BSP_USING_LPUART2
-			default n
-
-		config BSP_USING_RS485
-			bool "Enable RS485"
-			select BSP_USING_LPUART5
-			default n
+    config BSP_USING_RGB
+            bool "Enable RGB LED (PWM1_CH3A, PWM4_CH0A and PWM4_CH1A)"
+            select BSP_USING_PWM1
+            select BSP_USING_PWM4
+            select BSP_USING_PWM1_CH3
+            select BSP_USING_PWM4_CH0
+            select BSP_USING_PWM4_CH1
+            default n
+
+        config BSP_USING_MPU6050
+            bool "Enable MPU6050 (I2C1:J11 --> SCL; K11 --> SDA)"
+            select BSP_USING_I2C1
+            select PKG_USING_MPU6XXX
+            default n
+
+        menuconfig BSP_USING_AP3216C
+            bool "Enable AP3216C (I2C1:J11 --> SCL; K11 --> SDA)"
+            select BSP_USING_I2C1
+            select PKG_USING_AP3216C
+            default n
+            if BSP_USING_AP3216C
+                config AP3216C_USING_HW_INT
+                bool "Enable interrupt"
+                default n
+            endif
+
+        config BSP_USING_EEPROM
+            bool "Enable I2C EEPROM (I2C1:J11 --> SCL; K11 --> SDA)"
+            select BSP_USING_I2C1
+            select  PKG_USING_AT24CXX
+            default n
+
+        config BSP_USING_RS232
+            bool "Enable RS232"
+            select BSP_USING_LPUART2
+            default n
+
+        config BSP_USING_RS485
+            bool "Enable RS485"
+            select BSP_USING_LPUART5
+            default n
 
 endmenu
 

bsp/imxrt/imxrt1021-nxp-evk/board/SConscript

@@ -16,7 +16,7 @@ CPPDEFINES = ['CPU_MIMXRT1021DAG5A', 'ENDIANNESS', 'STD=C99', 'SKIP_SYSCLK_INIT'
 
 if rtconfig.CROSS_TOOL == 'keil':
     CPPDEFINES.append('__FPU_PRESENT=1')
-    
+
 group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES=CPPDEFINES)
 
 Return('group')

bsp/imxrt/imxrt1021-nxp-evk/xip/SConscript

@@ -13,11 +13,11 @@ if GetDepend('BSP_USING_QSPIFLASH'):
         LINKFLAGS += '--keep=*(.boot_hdr.dcd_data)'
         LINKFLAGS += '--keep=*(.boot_hdr.conf)'
     else:
-        LINKFLAGS = '' 
+        LINKFLAGS = ''
 
-    group = DefineGroup('xip', src, depend = [''], CPPPATH = CPPPATH, LINKFLAGS = LINKFLAGS) 
-    Return('group') 
+    group = DefineGroup('xip', src, depend = [''], CPPPATH = CPPPATH, LINKFLAGS = LINKFLAGS)
+    Return('group')
 
-if GetDepend('BSP_USING_HYPERFLASH'): 
+if GetDepend('BSP_USING_HYPERFLASH'):
     group = []
-    Return('group') 
+    Return('group')

bsp/imxrt/imxrt1052-atk-commander/applications/SConscript

@@ -6,17 +6,17 @@ cwd = GetCurrentDir()
 src = Glob('*.c')
 CPPPATH = [cwd]
 
-# add for startup script 
+# add for startup script
 if rtconfig.PLATFORM in ['gcc']:
     CPPDEFINES = ['__START=entry']
 else:
     CPPDEFINES = []
-    
+
 group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES=CPPDEFINES)
 
 list = os.listdir(cwd)
 for item in list:
     if os.path.isfile(os.path.join(cwd, item, 'SConscript')):
         group = group + SConscript(os.path.join(item, 'SConscript'))
-        
+
 Return('group')

bsp/imxrt/imxrt1052-atk-commander/board/Kconfig

@@ -1,7 +1,7 @@
 menu "Hardware Drivers Config"
 
 config SOC_IMXRT1052CVL5B
-    bool 
+    bool
     select SOC_MIMXRT1050_SERIES
     select RT_USING_COMPONENTS_INIT
     select RT_USING_USER_MAIN
@@ -12,7 +12,7 @@ menu "On-chip Peripheral Drivers"
     config BSP_USING_DMA
         bool "Enable DMA"
         default n
-        
+
     config BSP_USING_GPIO
         bool "Enable GPIO"
         select RT_USING_PIN
@@ -22,7 +22,7 @@ menu "On-chip Peripheral Drivers"
         bool "Enable UART"
         select RT_USING_SERIAL
         default y
-        
+
         if BSP_USING_LPUART
             config BSP_USING_LPUART1
                 bool "Enable LPUART1"
@@ -112,14 +112,14 @@ menu "On-chip Peripheral Drivers"
 endmenu
 
 menu "Onboard Peripheral Drivers"
-    
+
     config BSP_USING_SPI_FLASH
         bool "Enable SPI FLASH (W25Q256 spi3)"
         select BSP_USING_SPI3
         select RT_USING_SFUD
 
         default n
-        
+
     config BSP_USING_SDRAM
         bool "Enable SDRAM"
         default n

bsp/imxrt/imxrt1052-fire-pro/applications/SConscript

@@ -6,17 +6,17 @@ cwd = GetCurrentDir()
 src = Glob('*.c')
 CPPPATH = [cwd]
 
-# add for startup script 
+# add for startup script
 if rtconfig.PLATFORM in ['gcc']:
     CPPDEFINES = ['__START=entry']
 else:
     CPPDEFINES = []
-    
+
 group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES=CPPDEFINES)
 
 list = os.listdir(cwd)
 for item in list:
     if os.path.isfile(os.path.join(cwd, item, 'SConscript')):
         group = group + SConscript(os.path.join(item, 'SConscript'))
-        
+
 Return('group')

bsp/imxrt/imxrt1052-fire-pro/board/Kconfig

@@ -1,7 +1,7 @@
 menu "Hardware Drivers Config"
 
 config SOC_IMXRT1052CVL5B
-    bool 
+    bool
     select SOC_MIMXRT1050_SERIES
     select RT_USING_COMPONENTS_INIT
     select RT_USING_USER_MAIN
@@ -12,7 +12,7 @@ menu "On-chip Peripheral Drivers"
     config BSP_USING_DMA
         bool "Enable DMA"
         default n
-        
+
     config BSP_USING_GPIO
         bool "Enable GPIO"
         select RT_USING_PIN
@@ -33,7 +33,7 @@ menu "On-chip Peripheral Drivers"
         bool "Enable UART"
         select RT_USING_SERIAL
         default y
-        
+
         if BSP_USING_LPUART
             config BSP_USING_LPUART1
                 bool "Enable LPUART1"

bsp/imxrt/imxrt1052-nxp-evk/SConstruct

@@ -67,8 +67,5 @@ objs.extend(SConscript(os.path.join(libraries_path_prefix, imxrt_library, 'SCons
 # include drivers
 objs.extend(SConscript(os.path.join(libraries_path_prefix, 'drivers', 'SConscript')))
 
-# include peripherals
-objs.extend(SConscript(os.path.join(libraries_path_prefix, 'peripherals', 'SConscript')))
-
 # make a building
 DoBuilding(TARGET, objs)

bsp/imxrt/imxrt1052-nxp-evk/applications/SConscript

@@ -6,17 +6,17 @@ cwd = GetCurrentDir()
 src = Glob('*.c')
 CPPPATH = [cwd]
 
-# add for startup script 
+# add for startup script
 if rtconfig.PLATFORM in ['gcc']:
     CPPDEFINES = ['__START=entry']
 else:
     CPPDEFINES = []
-    
+
 group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES=CPPDEFINES)
 
 list = os.listdir(cwd)
 for item in list:
     if os.path.isfile(os.path.join(cwd, item, 'SConscript')):
         group = group + SConscript(os.path.join(item, 'SConscript'))
-        
+
 Return('group')

bsp/imxrt/imxrt1052-nxp-evk/board/Kconfig

@@ -17,7 +17,7 @@ menu "On-chip Peripheral Drivers"
     config BSP_USING_DMA
         bool "Enable DMA"
         default n
-        
+
     config BSP_USING_GPIO
         bool "Enable GPIO"
         select RT_USING_PIN
@@ -27,7 +27,7 @@ menu "On-chip Peripheral Drivers"
         bool "Enable UART"
         select RT_USING_SERIAL
         default y
-        
+
         if BSP_USING_LPUART
             config BSP_USING_LPUART1
                 bool "Enable LPUART1"
@@ -114,19 +114,19 @@ menu "Onboard Peripheral Drivers"
         default n
 
     menuconfig BSP_USING_ETH
-	bool "Enable Ethernet"
-	select RT_USING_NETDEV
-	select RT_USING_LWIP
-	default n
-    
-
-	if BSP_USING_ETH
-		config BSP_USING_PHY
+    bool "Enable Ethernet"
+    select RT_USING_NETDEV
+    select RT_USING_LWIP
+    default n
+
+
+    if BSP_USING_ETH
+        config BSP_USING_PHY
             select RT_USING_PHY
-			bool "Enable ethernet phy"
-			default y
+            bool "Enable ethernet phy"
+            default y
 
-	    if BSP_USING_PHY
+        if BSP_USING_PHY
             config PHY_DEVICE_ADDRESS
                 int "Specify address of phy device"
                 default 2
@@ -143,7 +143,7 @@ menu "Onboard Peripheral Drivers"
                 config PHY_RESET_PIN
                     int "indicate pin of reset"
                     default 9
-                
+
                 config FSL_FEATURE_PHYKSZ8081_USE_RMII50M_MODE
                     bool "Enable the PHY ksz8081 RMII50M mode"
                     depends on PHY_USING_KSZ8081
@@ -151,14 +151,14 @@ menu "Onboard Peripheral Drivers"
             endif
 
         endif
-	endif
-	
+    endif
+
     menuconfig BSP_USING_AUDIO
     bool "Enable AUDIO (WM8960)"
     select BSP_USING_I2C1
     select RT_USING_AUDIO
     default n
-        
+
     if BSP_USING_AUDIO
         config BSP_USING_AUDIO_PLAY
             bool "Enable Audio Play"
@@ -177,8 +177,8 @@ menu "Onboard Peripheral Drivers"
             config BSP_AUDIO_USING_DMA
                 bool "Enable AUDIO DMA"
                 default n
-        endif			
-    endif 	
+        endif
+    endif
 endmenu
 
 menu "Board extended module Drivers"

bsp/imxrt/imxrt1052-nxp-evk/xip/SConscript

@@ -15,9 +15,9 @@ if GetDepend('BSP_USING_HYPERFLASH'):
     else:
         LINKFLAGS = ''
 
-    group = DefineGroup('xip', src, depend = [''], CPPPATH = CPPPATH, LINKFLAGS = LINKFLAGS) 
-    Return('group') 
+    group = DefineGroup('xip', src, depend = [''], CPPPATH = CPPPATH, LINKFLAGS = LINKFLAGS)
+    Return('group')
 
-if GetDepend('BSP_USING_QSPIFLASH'): 
+if GetDepend('BSP_USING_QSPIFLASH'):
     group = []
-    Return('group') 
+    Return('group')

bsp/imxrt/imxrt1052-seeed-ArchMix/applications/SConscript

@@ -6,12 +6,12 @@ cwd = GetCurrentDir()
 src = Glob('*.c')
 CPPPATH = [cwd]
 
-# add for startup script 
+# add for startup script
 if rtconfig.PLATFORM in ['gcc']:
     CPPDEFINES = ['__START=entry']
 else:
     CPPDEFINES = []
-    
+
 group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES=CPPDEFINES)
 
 list = os.listdir(cwd)

bsp/imxrt/imxrt1052-seeed-ArchMix/board/Kconfig

@@ -1,14 +1,14 @@
 menu "Hardware Drivers Config"
 
 config SOC_IMXRT1052CVL5B
-    bool 
+    bool
     select SOC_MIMXRT1050_SERIES
     select RT_USING_COMPONENTS_INIT
     select RT_USING_USER_MAIN
     default y
 
 menu "Onboard Peripheral Drivers"
-        
+
     config BSP_USING_SDRAM
         bool "Enable SDRAM"
         default n
@@ -20,7 +20,7 @@ menu "On-chip Peripheral Drivers"
     config BSP_USING_DMA
         bool "Enable DMA"
         default n
-        
+
     config BSP_USING_GPIO
         bool "Enable GPIO"
         select RT_USING_PIN
@@ -30,7 +30,7 @@ menu "On-chip Peripheral Drivers"
         bool "Enable UART"
         select RT_USING_SERIAL
         default y
-        
+
         if BSP_USING_LPUART
             config BSP_USING_LPUART1
                 bool "Enable LPUART1"

bsp/imxrt/imxrt1060-nxp-evk/SConstruct

@@ -66,8 +66,5 @@ objs.extend(SConscript(os.path.join(libraries_path_prefix, imxrt_library, 'SCons
 # include drivers
 objs.extend(SConscript(os.path.join(libraries_path_prefix, 'drivers', 'SConscript')))
 
-# include peripherals
-objs.extend(SConscript(os.path.join(libraries_path_prefix, 'peripherals', 'SConscript')))
-
 # make a building
 DoBuilding(TARGET, objs)

bsp/imxrt/imxrt1060-nxp-evk/applications/SConscript

@@ -6,17 +6,17 @@ cwd = GetCurrentDir()
 src = Glob('*.c')
 CPPPATH = [cwd]
 
-# add for startup script 
+# add for startup script
 if rtconfig.PLATFORM in ['gcc']:
     CPPDEFINES = ['__START=entry']
 else:
     CPPDEFINES = []
-    
+
 group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES=CPPDEFINES)
 
 list = os.listdir(cwd)
 for item in list:
     if os.path.isfile(os.path.join(cwd, item, 'SConscript')):
         group = group + SConscript(os.path.join(item, 'SConscript'))
-        
+
 Return('group')

bsp/imxrt/imxrt1060-nxp-evk/board/Kconfig

@@ -18,7 +18,7 @@ config SOC_MIMXRT1062DVL6A
     default y
 
 menu "Onboard Peripheral Drivers"
-    
+
     config BSP_USING_SDRAM
         bool "Enable SDRAM"
         default n
@@ -175,7 +175,7 @@ menu "On-chip Peripheral Drivers"
     config BSP_USING_CACHE
         bool "Enable CACHE"
         default n
-      
+
 endmenu
 
 menu "Board extended module Drivers"

bsp/imxrt/imxrt1060-nxp-evk/board/SConscript

@@ -21,7 +21,7 @@ CPPDEFINES = ['CPU_MIMXRT1062DVL6A', 'SKIP_SYSCLK_INIT', 'EVK_MCIMXRM', 'FSL_SDK
 
 if rtconfig.PLATFORM in ['armcc', 'armclang']:
     CPPDEFINES.append('__FPU_PRESENT=1')
-    
+
 group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES=CPPDEFINES)
 
 Return('group')

bsp/imxrt/imxrt1060-nxp-evk/xip/SConscript

@@ -17,9 +17,9 @@ if GetDepend('BSP_USING_4MFLASH'):
     else:
         LINKFLAGS = ''
 
-    group = DefineGroup('xip', src, depend = [''], CPPPATH = CPPPATH, LINKFLAGS = LINKFLAGS) 
-    Return('group') 
+    group = DefineGroup('xip', src, depend = [''], CPPPATH = CPPPATH, LINKFLAGS = LINKFLAGS)
+    Return('group')
 
-if GetDepend('BSP_USING_QSPIFLASH'): 
+if GetDepend('BSP_USING_QSPIFLASH'):
     group = []
-    Return('group') 
+    Return('group')

bsp/imxrt/imxrt1064-nxp-evk/SConstruct

@@ -66,8 +66,5 @@ objs.extend(SConscript(os.path.join(libraries_path_prefix, imxrt_library, 'SCons
 # include drivers
 objs.extend(SConscript(os.path.join(libraries_path_prefix, 'drivers', 'SConscript')))
 
-# include peripherals
-objs.extend(SConscript(os.path.join(libraries_path_prefix, 'peripherals', 'SConscript')))
-
 # make a building
 DoBuilding(TARGET, objs)

bsp/imxrt/imxrt1064-nxp-evk/applications/SConscript

@@ -6,12 +6,12 @@ cwd = GetCurrentDir()
 src = Glob('*.c')
 CPPPATH = [cwd]
 
-# add for startup script 
+# add for startup script
 if rtconfig.PLATFORM in ['gcc']:
     CPPDEFINES = ['__START=entry']
 else:
     CPPDEFINES = []
-    
+
 group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES=CPPDEFINES)
 
 list = os.listdir(cwd)

bsp/imxrt/imxrt1064-nxp-evk/board/Kconfig

@@ -78,7 +78,7 @@ menu "On-chip Peripheral Drivers"
             config LCD_WIDTH
                 int "width"
                 default 480
-            
+
             config LCD_HEIGHT
                 int "height"
                 default 272
@@ -112,24 +112,24 @@ menu "On-chip Peripheral Drivers"
 endmenu
 
 menu "Onboard Peripheral Drivers"
-    
+
     config BSP_USING_SDRAM
         bool "Enable SDRAM"
         default n
 
     menuconfig BSP_USING_ETH
-	bool "Enable Ethernet"
-	select RT_USING_NETDEV
-	default n
-    
+    bool "Enable Ethernet"
+    select RT_USING_NETDEV
+    default n
 
-	if BSP_USING_ETH
-		config BSP_USING_PHY
+
+    if BSP_USING_ETH
+        config BSP_USING_PHY
             select RT_USING_PHY
-			bool "Enable ethernet phy"
-			default y
+            bool "Enable ethernet phy"
+            default y
 
-	    if BSP_USING_PHY
+        if BSP_USING_PHY
             config PHY_DEVICE_ADDRESS
                 int "Specify address of phy device"
                 default 2
@@ -146,7 +146,7 @@ menu "Onboard Peripheral Drivers"
                 config PHY_RESET_PIN
                     int "indicate pin of reset"
                     default 9
-                
+
                 config FSL_FEATURE_PHYKSZ8081_USE_RMII50M_MODE
                     bool "Enable the PHY ksz8081 RMII50M mode"
                     depends on PHY_USING_KSZ8081
@@ -154,7 +154,7 @@ menu "Onboard Peripheral Drivers"
             endif
 
         endif
-	endif
+    endif
 endmenu
 
 menu "Board extended module Drivers"

bsp/imxrt/imxrt1064-nxp-evk/board/SConscript

@@ -17,7 +17,7 @@ CPPDEFINES = ['CPU_MIMXRT1064DVL6A', 'SKIP_SYSCLK_INIT', 'EVK_MCIMXRM', 'FSL_SDK
 
 if rtconfig.PLATFORM in ['armcc', 'armclang']:
     CPPDEFINES.append('__FPU_PRESENT=1')
-    
+
 group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES=CPPDEFINES)
 
 Return('group')

bsp/imxrt/imxrt1064-nxp-evk/xip/SConscript

@@ -15,9 +15,9 @@ if GetDepend('BSP_USING_4MFLASH'):
     else:
         LINKFLAGS = ''
 
-    group = DefineGroup('xip', src, depend = [''], CPPPATH = CPPPATH, LINKFLAGS = LINKFLAGS) 
-    Return('group') 
+    group = DefineGroup('xip', src, depend = [''], CPPPATH = CPPPATH, LINKFLAGS = LINKFLAGS)
+    Return('group')
 
-if GetDepend('BSP_USING_QSPIFLASH'): 
+if GetDepend('BSP_USING_QSPIFLASH'):
     group = []
-    Return('group') 
+    Return('group')

bsp/imxrt/imxrt1170-nxp-evk/SConstruct

@@ -66,8 +66,5 @@ objs.extend(SConscript(os.path.join(libraries_path_prefix, imxrt_library, 'SCons
 # include drivers
 objs.extend(SConscript(os.path.join(libraries_path_prefix, 'drivers', 'SConscript')))
 
-# include peripherals
-objs.extend(SConscript(os.path.join(libraries_path_prefix, 'peripherals', 'SConscript')))
-
 # make a building
 DoBuilding(TARGET, objs)

bsp/imxrt/imxrt1170-nxp-evk/applications/SConscript

@@ -6,17 +6,17 @@ cwd = GetCurrentDir()
 src = Glob('*.c')
 CPPPATH = [cwd]
 
-# add for startup script 
+# add for startup script
 if rtconfig.CROSS_TOOL == 'gcc':
     CPPDEFINES = ['__START=entry']
 else:
     CPPDEFINES = []
-    
+
 group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES=CPPDEFINES)
 
 list = os.listdir(cwd)
 for item in list:
     if os.path.isfile(os.path.join(cwd, item, 'SConscript')):
         group = group + SConscript(os.path.join(item, 'SConscript'))
-        
+
 Return('group')

bsp/imxrt/imxrt1170-nxp-evk/board/Kconfig

@@ -107,20 +107,20 @@ menu "Onboard Peripheral Drivers"
             default y
 
         if BSP_USING_PHY
-            config PHY_DEVICE_ADDRESS
-                int "Specify address of phy device"
-                default 2
-
             config PHY_USING_KSZ8081
-                bool "i.MX RT1064EVK uses ksz8081 phy"
+                bool "i.MX RT1176EVK uses ksz8081 phy"
                 default y
 
             if PHY_USING_KSZ8081
-                config PHY_RESET_PORT
+                config PHY_KSZ8081_ADDRESS
+                int "Specify address of phy device"
+                default 2
+
+                config PHY_RESET_KSZ8081_PORT
                     int "indicate port of reset"
                     default 6
 
-                config PHY_RESET_PIN
+                config PHY_RESET_KSZ8081_PIN
                     int "indicate pin of reset"
                     default 12
 
@@ -129,10 +129,29 @@ menu "Onboard Peripheral Drivers"
                     depends on PHY_USING_KSZ8081
                     default y
             endif
+        endif
 
+        if BSP_USING_PHY
+                config PHY_USING_RTL8211F
+                    bool "i.MX RT1176EVK uses rtl8211f phy"
+                    default y
+
+                if PHY_USING_RTL8211F
+                    config PHY_RTL8211F_ADDRESS
+                    int "Specify address of phy device"
+                    default 1
+
+                    config PHY_RESET_RTL8211F_PORT
+                        int "indicate port of reset"
+                        default 11
+
+                    config PHY_RESET_RTL8211F_PIN
+                        int "indicate pin of reset"
+                        default 14
+
+                endif
         endif
     endif
-
 endmenu
 
 menu "Board extended module Drivers"

bsp/imxrt/imxrt1170-nxp-evk/xip/SConscript

@@ -16,5 +16,5 @@ if GetDepend('BSP_USING_QSPIFLASH'):
     else:
         LINKFLAGS = ''
 
-    group = DefineGroup('xip', src, depend = [''], CPPPATH = CPPPATH, LINKFLAGS = LINKFLAGS) 
-    Return('group') 
+    group = DefineGroup('xip', src, depend = [''], CPPPATH = CPPPATH, LINKFLAGS = LINKFLAGS)
+    Return('group')

bsp/imxrt/libraries/Kconfig

@@ -22,8 +22,8 @@ config SOC_IMXRT1064_SERIES
     bool
     select ARCH_ARM_CORTEX_M7
     select ARCH_ARM_CORTEX_FPU
-    
+
 config SOC_IMXRT1170_SERIES
     bool
     select ARCH_ARM_CORTEX_M7
-    select ARCH_ARM_CORTEX_FPU
+    select ARCH_ARM_CORTEX_FPU

bsp/imxrt/libraries/MIMXRT1050/SConscript

@@ -61,7 +61,7 @@ if GetDepend(['BSP_USING_ETH']):
 
 if GetDepend(['BSP_USING_SDIO']):
     src += ['MIMXRT1052/drivers/fsl_usdhc.c']
-    
+
 if GetDepend(['RT_USING_AUDIO']):
     src += ['MIMXRT1052/drivers/fsl_sai.c']
     src += ['MIMXRT1052/drivers/fsl_sai_edma.c']
@@ -75,7 +75,7 @@ if GetDepend(['BSP_USING_DMA']):
     src += ['MIMXRT1052/drivers/fsl_lpuart_edma.c']
     if GetDepend(['BSP_USING_SPI']):
         src += ['MIMXRT1052/drivers/fsl_lpspi_edma.c']
-    
+
 if GetDepend(['BSP_USING_PULSE_ENCODER']):
     src += ['MIMXRT1052/drivers/fsl_enc.c']
 

bsp/imxrt/libraries/MIMXRT1060/SConscript

@@ -74,7 +74,7 @@ if GetDepend(['BSP_USING_ETH']):
 
 if GetDepend(['BSP_USING_SDIO']):
     src += ['MIMXRT1060/drivers/fsl_usdhc.c']
-    
+
 if GetDepend(['RT_USING_AUDIO']):
     src += ['MIMXRT1060/drivers/fsl_sai.c']
     src += ['MIMXRT1060/drivers/fsl_sai_edma.c']
@@ -88,7 +88,7 @@ if GetDepend(['BSP_USING_DMA']):
     src += ['MIMXRT1060/drivers/fsl_lpuart_edma.c']
     if GetDepend(['BSP_USING_SPI']):
         src += ['MIMXRT1060/drivers/fsl_lpspi_edma.c']
-    
+
 if GetDepend(['BSP_USING_PULSE_ENCODER']):
     src += ['MIMXRT1060/drivers/fsl_enc.c']
 

bsp/imxrt/libraries/MIMXRT1064/SConscript

@@ -63,7 +63,7 @@ if GetDepend(['RT_USING_AUDIO']):
 
 if GetDepend(['BSP_USING_LTDC']):
     src += ['MIMXRT1064/drivers/']
-    
+
 if GetDepend(["BSP_USING_LCD"]):
     src += ['MIMXRT1064/drivers/fsl_elcdif.c']
 

bsp/imxrt/libraries/MIMXRT1170/SConscript

@@ -26,20 +26,20 @@ if GetDepend(['BSP_USING_GPIO']):
 
 if GetDepend(['BSP_USING_LPUART']):
     src += ['MIMXRT1176/drivers/fsl_lpuart.c']
-  
+
 if GetDepend(['BSP_USING_RTC']):
     src += ['MIMXRT1176/drivers/fsl_snvs_hp.c']
     src += ['MIMXRT1176/drivers/fsl_snvs_lp.c']
-    
+
 if GetDepend(['BSP_USING_HWTIMER']) or GetDepend(['BSP_USING_PWM']):
     src += ['MIMXRT1176/drivers/fsl_gpt.c']
 
 if GetDepend(['BSP_USING_PWM']):
-    src += ['MIMXRT1176/drivers/fsl_pwm.c']    
- 
+    src += ['MIMXRT1176/drivers/fsl_pwm.c']
+
 if GetDepend(['BSP_USING_SDIO']):
     src += ['MIMXRT1176/drivers/fsl_usdhc.c']
-    
+
 if rtconfig.CROSS_TOOL == 'gcc':
     group = DefineGroup('Libraries', src, depend = [''], CPPPATH = path, ASFLAGS = '$ASFLAGS -D __STARTUP_CLEAR_BSS')
 else:

bsp/imxrt/libraries/drivers/SConscript

@@ -32,13 +32,13 @@ if GetDepend('BSP_USING_PWM'):
 
 if GetDepend('BSP_USING_ADC'):
     src += ['drv_adc.c']
-    
+
 if GetDepend('BSP_USING_LPADC'):
     src += ['drv_lpadc.c']
-    
+
 if GetDepend('BSP_USING_CAN'):
     src += ['drv_can.c']
-    
+
 if GetDepend('BSP_USING_SDRAM'):
     src += ['drv_sdram.c']
 
@@ -47,19 +47,21 @@ if GetDepend('BSP_USING_LCD'):
 
 if GetDepend('BSP_USING_ETH'):
     src += ['drv_eth.c']
-    
+
 if GetDepend('BSP_USING_PHY'):
     src += ['drv_mdio.c']
     if GetDepend('PHY_USING_KSZ8081'):
         src += ['drv_ksz8081.c']
+    if GetDepend('PHY_USING_RTL8211F'):
+        src += ['drv_rtl8211f.c']
 
 if GetDepend('BSP_USING_AUDIO'):
     src += ['drv_sai.c']
     src += ['bsp_wm8960.c']
-  
+
 if GetDepend('BSP_USING_SDIO'):
-    src += ['drv_sdio.c'] 
-    
+    src += ['drv_sdio.c']
+
 if GetDepend('BSP_USING_USB_DEVICE'):
     src += ['drv_usbd.c']
     src += Glob('usb/device/*.c')
@@ -67,7 +69,7 @@ if GetDepend('BSP_USING_USB_DEVICE'):
 if GetDepend('BSP_USING_USB_DEVICE') or GetDepend('RT_USING_USB_HOST'):
     src += Glob('usb/phy/*.c')
     CPPDEFINES += ['ENDIANNESS','USE_RTOS']
-    
+
 if GetDepend('RT_USING_USB_HOST'):
     src += ['drv_usbh.c']
     src += Glob('usb/host/*.c')

bsp/imxrt/libraries/drivers/drv_ksz8081.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2006-2020, RT-Thread Development Team
+ * Copyright (c) 2006-2022, RT-Thread Development Team
  *
  * SPDX-License-Identifier: Apache-2.0
  *
@@ -168,7 +168,7 @@ static rt_phy_status rt_phy_init(void *object, rt_uint32_t phy_addr, rt_uint32_t
         #endif  /* FSL_FEATURE_PHYKSZ8081_USE_RMII50M_MODE */
 
         /* Set the negotiation. */
-        result = phy_ksz8081.ops->write(PHY_AUTONEG_ADVERTISE_REG, 
+        result = phy_ksz8081.ops->write(PHY_AUTONEG_ADVERTISE_REG,
                                         (PHY_100BASETX_FULLDUPLEX_MASK | PHY_100BASETX_HALFDUPLEX_MASK |
                                         PHY_10BASETX_FULLDUPLEX_MASK | PHY_10BASETX_HALFDUPLEX_MASK | 0x1U));
         if (PHY_STATUS_OK == result)

bsp/imxrt/libraries/drivers/drv_rtl8211f.c

@@ -0,0 +1,462 @@
+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2022-08-15     xjy198903    the first version
+ */
+#include <rtthread.h>
+
+#ifdef PHY_USING_RTL8211F
+
+#include <rtdevice.h>
+#include "drv_gpio.h"
+#include "drv_mdio.h"
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*! @note The following PHY registers are the IEEE802.3 standard definition, same register and bit field may
+          have different names in various PHYs, but the feature they represent should be same or very similar. */
+
+/*! @brief Defines the IEEE802.3 standard PHY registers. */
+#define PHY_BASICCONTROL_REG 0x00U        /*!< The PHY basic control register. */
+#define PHY_BASICSTATUS_REG 0x01U         /*!< The PHY basic status register. */
+#define PHY_ID1_REG 0x02U                 /*!< The PHY ID one register. */
+#define PHY_ID2_REG 0x03U                 /*!< The PHY ID two register. */
+#define PHY_AUTONEG_ADVERTISE_REG 0x04U   /*!< The PHY auto-negotiate advertise register. */
+#define PHY_AUTONEG_LINKPARTNER_REG 0x05U /*!< The PHY auto negotiation link partner ability register. */
+#define PHY_AUTONEG_EXPANSION_REG 0x06U   /*!< The PHY auto negotiation expansion register. */
+#define PHY_1000BASET_CONTROL_REG 0x09U   /*!< The PHY 1000BASE-T control register. */
+#define PHY_MMD_ACCESS_CONTROL_REG 0x0DU  /*!< The PHY MMD access control register. */
+#define PHY_MMD_ACCESS_DATA_REG 0x0EU     /*!< The PHY MMD access data register. */
+
+/*! @brief Defines the mask flag in basic control register(Address 0x00). */
+#define PHY_BCTL_SPEED1_MASK 0x0040U          /*!< The PHY speed bit mask(MSB).*/
+#define PHY_BCTL_ISOLATE_MASK 0x0400U         /*!< The PHY isolate mask.*/
+#define PHY_BCTL_DUPLEX_MASK 0x0100U          /*!< The PHY duplex bit mask. */
+#define PHY_BCTL_RESTART_AUTONEG_MASK 0x0200U /*!< The PHY restart auto negotiation mask. */
+#define PHY_BCTL_AUTONEG_MASK 0x1000U         /*!< The PHY auto negotiation bit mask. */
+#define PHY_BCTL_SPEED0_MASK 0x2000U          /*!< The PHY speed bit mask(LSB). */
+#define PHY_BCTL_LOOP_MASK 0x4000U            /*!< The PHY loop bit mask. */
+#define PHY_BCTL_RESET_MASK 0x8000U           /*!< The PHY reset bit mask. */
+
+/*! @brief Defines the mask flag in basic status register(Address 0x01). */
+#define PHY_BSTATUS_LINKSTATUS_MASK 0x0004U  /*!< The PHY link status mask. */
+#define PHY_BSTATUS_AUTONEGABLE_MASK 0x0008U /*!< The PHY auto-negotiation ability mask. */
+#define PHY_BSTATUS_SPEEDUPLX_MASK 0x001CU   /*!< The PHY speed and duplex mask. */
+#define PHY_BSTATUS_AUTONEGCOMP_MASK 0x0020U /*!< The PHY auto-negotiation complete mask. */
+
+/*! @brief Defines the mask flag in PHY auto-negotiation advertise register(Address 0x04). */
+#define PHY_100BaseT4_ABILITY_MASK 0x200U    /*!< The PHY have the T4 ability. */
+#define PHY_100BASETX_FULLDUPLEX_MASK 0x100U /*!< The PHY has the 100M full duplex ability.*/
+#define PHY_100BASETX_HALFDUPLEX_MASK 0x080U /*!< The PHY has the 100M full duplex ability.*/
+#define PHY_10BASETX_FULLDUPLEX_MASK 0x040U  /*!< The PHY has the 10M full duplex ability.*/
+#define PHY_10BASETX_HALFDUPLEX_MASK 0x020U  /*!< The PHY has the 10M full duplex ability.*/
+#define PHY_IEEE802_3_SELECTOR_MASK 0x001U   /*!< The message type being sent by Auto-Nego.*/
+
+/*! @brief Defines the mask flag in the 1000BASE-T control register(Address 0x09). */
+#define PHY_1000BASET_FULLDUPLEX_MASK 0x200U /*!< The PHY has the 1000M full duplex ability.*/
+#define PHY_1000BASET_HALFDUPLEX_MASK 0x100U /*!< The PHY has the 1000M half duplex ability.*/
+
+/*! @brief Defines the PHY RTL8211F vendor defined registers. */
+#define PHY_SPECIFIC_STATUS_REG 0x1AU /*!< The PHY specific status register. */
+#define PHY_PAGE_SELECT_REG 0x1FU     /*!< The PHY page select register. */
+
+/*! @brief Defines the PHY RTL8211F ID number. */
+#define PHY_CONTROL_ID1 0x001CU /*!< The PHY ID1 . */
+
+/*! @brief Defines the mask flag in specific status register. */
+#define PHY_SSTATUS_LINKSTATUS_MASK 0x04U /*!< The PHY link status mask. */
+#define PHY_SSTATUS_LINKSPEED_MASK 0x30U  /*!< The PHY link speed mask. */
+#define PHY_SSTATUS_LINKDUPLEX_MASK 0x08U /*!< The PHY link duplex mask. */
+#define PHY_SSTATUS_LINKSPEED_SHIFT 4U    /*!< The link speed shift */
+
+/*! @brief Defines the PHY RTL8211F extra page and the registers in specified page. */
+#define PHY_PAGE_RGMII_TXRX_DELAY_ADDR 0xD08U /*!< The register page including RGMII TX/RX delay setting. */
+#define PHY_RGMII_TX_DELAY_REG 0x11U          /*!< The RGMII TXC delay register. */
+#define PHY_RGMII_RX_DELAY_REG 0x15U          /*!< The RGMII RXC delay register. */
+#define PHY_RGMII_TX_DELAY_MASK 0x100U        /*!< The RGMII TXC delay mask. */
+#define PHY_RGMII_RX_DELAY_MASK 0x8U          /*!< The RGMII RXC delay mask. */
+
+/*! @brief MDIO MMD Devices .*/
+#define PHY_MDIO_MMD_PCS 3U
+#define PHY_MDIO_MMD_AN 7U
+
+/*! @brief MDIO MMD Physical Coding layer device registers .*/
+#define PHY_MDIO_PCS_EEE_CAP 0x14U /* EEE capability */
+
+/*! @brief MDIO MMD AutoNegotiation device registers .*/
+#define PHY_MDIO_AN_EEE_ADV 0x3CU /* EEE advertisement */
+
+/*! @brief MDIO MMD EEE mask flags. (common for adv and cap) */
+#define PHY_MDIO_EEE_100TX 0x2U
+#define PHY_MDIO_EEE_1000T 0x4U
+
+/*! @brief Defines the timeout macro. */
+#define PHY_READID_TIMEOUT_COUNT 1000U
+
+/* defined the Reset pin, PORT and PIN config by menuconfig */
+#define RESET_PIN GET_PIN(PHY_RESET_RTL8211F_PORT, PHY_RESET_RTL8211F_PIN)
+
+/*! @brief Defines the PHY MMD data access mode. */
+typedef enum _phy_mmd_access_mode
+{
+    kPHY_MMDAccessNoPostIncrement = (1U << 14), /*!< ENET PHY MMD access data with no address post increment. */
+    kPHY_MMDAccessRdWrPostIncrement =
+        (2U << 14),                             /*!< ENET PHY MMD access data with Read/Write address post increment. */
+    kPHY_MMDAccessWrPostIncrement = (3U << 14), /*!< ENET PHY MMD access data with Write address post increment. */
+} phy_mmd_access_mode_t;
+
+/*******************************************************************************
+ * Prototypes
+ ******************************************************************************/
+
+/*******************************************************************************
+ * Variables
+ ******************************************************************************/
+
+static struct rt_phy_device phy_rtl8211f;
+
+/*******************************************************************************
+ * Code
+ ******************************************************************************/
+
+static inline rt_bool_t read_reg(rt_mdio_t *bus, rt_uint32_t addr, rt_uint32_t reg_id, rt_uint32_t *value)
+{
+    if (4 != bus->ops->read(bus, addr, reg_id, value, 4))
+    {
+        return RT_FALSE;
+    }
+    return RT_TRUE;
+}
+
+static inline rt_bool_t write_reg(rt_mdio_t *bus, rt_uint32_t addr, rt_uint32_t reg_id, rt_uint32_t value)
+{
+    if (4 != bus->ops->write(bus, addr, reg_id, &value, 4))
+    {
+        return RT_FALSE;
+    }
+    return RT_TRUE;
+}
+
+static inline status_t PHY_RTL8211F_MMD_WriteData(uint32_t data)
+{
+    return phy_rtl8211f.ops->write(PHY_MMD_ACCESS_DATA_REG, data);
+}
+
+static status_t PHY_RTL8211F_MMD_SetDevice(uint8_t device,
+                                           uint16_t addr,
+                                           phy_mmd_access_mode_t mode)
+{
+    status_t result = PHY_STATUS_OK;
+
+    /* Set Function mode of address access(b00) and device address. */
+    result = phy_rtl8211f.ops->write(PHY_MMD_ACCESS_CONTROL_REG, device);
+    if (result != PHY_STATUS_OK)
+    {
+        return result;
+    }
+
+    /* Set register address. */
+    result = phy_rtl8211f.ops->write(PHY_MMD_ACCESS_DATA_REG, addr);
+    if (result != PHY_STATUS_OK)
+    {
+        return result;
+    }
+
+    /* Set Function mode of data access(b01~11) and device address. */
+    result = phy_rtl8211f.ops->write(PHY_MMD_ACCESS_CONTROL_REG, (uint32_t)mode | (uint32_t)device);
+    return result;
+}
+
+static status_t PHY_RTL8211F_MMD_Write(uint8_t device, uint16_t addr, uint32_t data)
+{
+    status_t result = PHY_STATUS_OK;
+
+    result = PHY_RTL8211F_MMD_SetDevice(device, addr, kPHY_MMDAccessNoPostIncrement);
+    if (result == PHY_STATUS_OK)
+    {
+        result = PHY_RTL8211F_MMD_WriteData(data);
+    }
+    return result;
+}
+
+static rt_phy_status rt_phy_init(void *object, rt_uint32_t phy_addr, rt_uint32_t src_clock_hz)
+{
+    rt_bool_t ret;
+    rt_phy_status result;
+    rt_uint32_t counter = PHY_READID_TIMEOUT_COUNT;
+    rt_uint32_t regValue = 0U;
+
+    // reset phy device by gpio
+    rt_pin_mode(RESET_PIN, PIN_MODE_OUTPUT);
+    rt_pin_write(RESET_PIN, PIN_LOW);
+    rt_thread_mdelay(10);
+    rt_pin_write(RESET_PIN, PIN_HIGH);
+    rt_thread_mdelay(30);
+
+    rt_mdio_t *mdio_bus = rt_hw_mdio_register(object, "phy_mdio");
+    if (RT_NULL == mdio_bus)
+    {
+        return PHY_STATUS_FAIL;
+    }
+    phy_rtl8211f.bus = mdio_bus;
+    phy_rtl8211f.addr = phy_addr;
+    ret = mdio_bus->ops->init(mdio_bus, src_clock_hz);
+    if (!ret)
+    {
+        return PHY_STATUS_FAIL;
+    }
+
+    /* Check PHY ID. */
+    do
+    {
+        result = phy_rtl8211f.ops->read(PHY_ID1_REG, &regValue);
+        if (result != PHY_STATUS_OK)
+        {
+            return result;
+        }
+        counter--;
+    } while ((regValue != PHY_CONTROL_ID1) && (counter != 0U));
+
+    if (counter == 0U)
+    {
+        return PHY_STATUS_FAIL;
+    }
+
+    /* Reset PHY. */
+    result = phy_rtl8211f.ops->write(PHY_BASICCONTROL_REG, PHY_BCTL_RESET_MASK);
+    if (result != PHY_STATUS_OK)
+    {
+        return result;
+    }
+
+    /* The RGMII specifies output TXC/RXC and TXD/RXD without any clock skew. Need to add skew on clock line
+       to make sure the other side sample right data. This can also be done in PCB traces. */
+    result = phy_rtl8211f.ops->write(PHY_PAGE_SELECT_REG, PHY_PAGE_RGMII_TXRX_DELAY_ADDR);
+    if (PHY_STATUS_OK != result)
+    {
+        return result;
+    }
+
+    /* Set Tx Delay */
+    result = phy_rtl8211f.ops->read(PHY_RGMII_TX_DELAY_REG, &regValue);
+    if (PHY_STATUS_OK == result)
+    {
+        regValue |= PHY_RGMII_TX_DELAY_MASK;
+        result = phy_rtl8211f.ops->write(PHY_RGMII_TX_DELAY_REG, regValue);
+        if (result != PHY_STATUS_OK)
+        {
+            return result;
+        }
+    }
+    else
+    {
+        return result;
+    }
+
+    /* Set Rx Delay */
+    result = phy_rtl8211f.ops->read(PHY_RGMII_RX_DELAY_REG, &regValue);
+    if (PHY_STATUS_OK == result)
+    {
+        regValue |= PHY_RGMII_RX_DELAY_MASK;
+        result = phy_rtl8211f.ops->write(PHY_RGMII_RX_DELAY_REG, regValue);
+        if (result != PHY_STATUS_OK)
+        {
+            return result;
+        }
+    }
+    else
+    {
+        return result;
+    }
+
+    /* Restore to default page 0 */
+    result = phy_rtl8211f.ops->write(PHY_PAGE_SELECT_REG, 0x0);
+    if (result != PHY_STATUS_OK)
+    {
+        return result;
+    }
+
+    // disabled EEE
+    result = PHY_RTL8211F_MMD_Write(PHY_MDIO_MMD_AN, PHY_MDIO_AN_EEE_ADV, 0);
+    if (result != PHY_STATUS_OK)
+    {
+        return result;
+    }
+
+    /* Set the auto-negotiation. */
+    result = phy_rtl8211f.ops->write(PHY_AUTONEG_ADVERTISE_REG,
+                                     PHY_100BASETX_FULLDUPLEX_MASK | PHY_100BASETX_HALFDUPLEX_MASK | PHY_10BASETX_FULLDUPLEX_MASK |
+                                         PHY_10BASETX_HALFDUPLEX_MASK | PHY_IEEE802_3_SELECTOR_MASK);
+    if (result == PHY_STATUS_OK)
+    {
+        result = phy_rtl8211f.ops->write(PHY_1000BASET_CONTROL_REG, PHY_1000BASET_FULLDUPLEX_MASK);
+        if (result == PHY_STATUS_OK)
+        {
+            result = phy_rtl8211f.ops->read(PHY_BASICCONTROL_REG, &regValue);
+            if (result == PHY_STATUS_OK)
+            {
+                result = phy_rtl8211f.ops->write(PHY_BASICCONTROL_REG, (regValue | PHY_BCTL_AUTONEG_MASK | PHY_BCTL_RESTART_AUTONEG_MASK));
+            }
+        }
+    }
+
+    return result;
+}
+
+static rt_phy_status rt_phy_read(rt_uint32_t reg, rt_uint32_t *data)
+{
+    rt_mdio_t *mdio_bus = phy_rtl8211f.bus;
+    rt_uint32_t device_id = phy_rtl8211f.addr;
+
+    if (read_reg(mdio_bus, device_id, reg, data))
+    {
+        return PHY_STATUS_OK;
+    }
+    return PHY_STATUS_FAIL;
+}
+
+static rt_phy_status rt_phy_write(rt_uint32_t reg, rt_uint32_t data)
+{
+    rt_mdio_t *mdio_bus = phy_rtl8211f.bus;
+    rt_uint32_t device_id = phy_rtl8211f.addr;
+
+    if (write_reg(mdio_bus, device_id, reg, data))
+    {
+        return PHY_STATUS_OK;
+    }
+    return PHY_STATUS_FAIL;
+}
+
+static rt_phy_status rt_phy_loopback(rt_uint32_t mode, rt_uint32_t speed, rt_bool_t enable)
+{
+    /* This PHY only supports local loopback. */
+    //    rt_assert(mode == PHY_LOCAL_LOOP);
+
+    status_t result;
+    uint32_t regValue;
+
+    /* Set the loop mode. */
+    if (enable)
+    {
+        if (speed == PHY_SPEED_1000M)
+        {
+            regValue = PHY_BCTL_SPEED1_MASK | PHY_BCTL_DUPLEX_MASK | PHY_BCTL_LOOP_MASK;
+        }
+        else if (speed == PHY_SPEED_100M)
+        {
+            regValue = PHY_BCTL_SPEED0_MASK | PHY_BCTL_DUPLEX_MASK | PHY_BCTL_LOOP_MASK;
+        }
+        else
+        {
+            regValue = PHY_BCTL_DUPLEX_MASK | PHY_BCTL_LOOP_MASK;
+        }
+        result = phy_rtl8211f.ops->write(PHY_BASICCONTROL_REG, regValue);
+    }
+    else
+    {
+        /* First read the current status in control register. */
+        result = phy_rtl8211f.ops->read(PHY_BASICCONTROL_REG, &regValue);
+        if (result == PHY_STATUS_OK)
+        {
+            regValue &= ~PHY_BCTL_LOOP_MASK;
+            result = phy_rtl8211f.ops->write(PHY_BASICCONTROL_REG, (regValue | PHY_BCTL_RESTART_AUTONEG_MASK));
+        }
+    }
+    return result;
+}
+
+static rt_phy_status get_link_status(rt_bool_t *status)
+{
+    // assert(status);
+
+    status_t result;
+    uint32_t regValue;
+
+    /* Read the basic status register. */
+    result = phy_rtl8211f.ops->read(PHY_SPECIFIC_STATUS_REG, &regValue);
+    if (result == PHY_STATUS_OK)
+    {
+        if ((PHY_SSTATUS_LINKSTATUS_MASK & regValue) != 0U)
+        {
+            /* Link up. */
+            *status = true;
+        }
+        else
+        {
+            /* Link down. */
+            *status = false;
+        }
+    }
+    return result;
+}
+
+static rt_phy_status get_link_speed_duplex(rt_uint32_t *speed, rt_uint32_t *duplex)
+{
+    // assert(!((speed == NULL) && (duplex == NULL)));
+
+    status_t result;
+    uint32_t regValue;
+
+    /* Read the status register. */
+    result = phy_rtl8211f.ops->read(PHY_SPECIFIC_STATUS_REG, &regValue);
+    if (result == PHY_STATUS_OK)
+    {
+        if (speed != NULL)
+        {
+            switch ((regValue & PHY_SSTATUS_LINKSPEED_MASK) >> PHY_SSTATUS_LINKSPEED_SHIFT)
+            {
+            case (uint32_t)PHY_SPEED_10M:
+                *speed = PHY_SPEED_10M;
+                break;
+            case (uint32_t)PHY_SPEED_100M:
+                *speed = PHY_SPEED_100M;
+                break;
+            case (uint32_t)PHY_SPEED_1000M:
+                *speed = PHY_SPEED_1000M;
+                break;
+            default:
+                *speed = PHY_SPEED_10M;
+                break;
+            }
+        }
+
+        if (duplex != NULL)
+        {
+            if ((regValue & PHY_SSTATUS_LINKDUPLEX_MASK) != 0U)
+            {
+                *duplex = PHY_FULL_DUPLEX;
+            }
+            else
+            {
+                *duplex = PHY_HALF_DUPLEX;
+            }
+        }
+    }
+    return result;
+}
+
+static struct rt_phy_ops phy_ops =
+    {
+        .init = rt_phy_init,
+        .read = rt_phy_read,
+        .write = rt_phy_write,
+        .loopback = rt_phy_loopback,
+        .get_link_status = get_link_status,
+        .get_link_speed_duplex = get_link_speed_duplex,
+};
+
+static int rt_phy_rtl8211f_register(void)
+{
+    phy_rtl8211f.ops = &phy_ops;
+    rt_hw_phy_register(&phy_rtl8211f, "rtl8211f");
+    return 1;
+}
+
+INIT_DEVICE_EXPORT(rt_phy_rtl8211f_register);
+#endif /* PHY_USING_RTL8211F */

bsp/imxrt/libraries/templates/imxrt1050xxx/applications/SConscript

@@ -5,12 +5,12 @@ cwd = GetCurrentDir()
 src = Glob('*.c')
 CPPPATH = [cwd]
 
-# add for startup script 
+# add for startup script
 if rtconfig.PLATFORM in ['gcc']:
     CPPDEFINES = ['__START=entry']
 else:
     CPPDEFINES = []
-    
+
 group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES=CPPDEFINES)
 
 Return('group')

bsp/imxrt/libraries/templates/imxrt1050xxx/board/Kconfig

@@ -1,7 +1,7 @@
 menu "Hardware Drivers Config"
 
 config SOC_IMXRT1052CVL5B
-    bool 
+    bool
     select SOC_MIMXRT1050_SERIES
     select RT_USING_COMPONENTS_INIT
     select RT_USING_USER_MAIN
@@ -12,7 +12,7 @@ menu "On-chip Peripheral Drivers"
     config BSP_USING_DMA
         bool "Enable DMA"
         default n
-        
+
     config BSP_USING_GPIO
         bool "Enable GPIO"
         select RT_USING_PIN
@@ -22,7 +22,7 @@ menu "On-chip Peripheral Drivers"
         bool "Enable UART"
         select RT_USING_SERIAL
         default y
-        
+
         if BSP_USING_LPUART
             config BSP_USING_LPUART1
                 bool "Enable LPUART1"

bsp/imxrt/libraries/templates/imxrt1064xxx/applications/SConscript

@@ -5,12 +5,12 @@ cwd = GetCurrentDir()
 src = Glob('*.c')
 CPPPATH = [cwd]
 
-# add for startup script 
+# add for startup script
 if rtconfig.PLATFORM in ['gcc']:
     CPPDEFINES = ['__START=entry']
 else:
     CPPDEFINES = []
-    
+
 group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES=CPPDEFINES)
 
 Return('group')

bsp/imxrt/libraries/templates/imxrt1064xxx/xip/SConscript

@@ -15,9 +15,9 @@ if GetDepend('BSP_USING_4MFLASH'):
     else:
         LINKFLAGS = ''
 
-    group = DefineGroup('xip', src, depend = [''], CPPPATH = CPPPATH, LINKFLAGS = LINKFLAGS) 
-    Return('group') 
+    group = DefineGroup('xip', src, depend = [''], CPPPATH = CPPPATH, LINKFLAGS = LINKFLAGS)
+    Return('group')
 
-if GetDepend('BSP_USING_QSPIFLASH'): 
+if GetDepend('BSP_USING_QSPIFLASH'):
     group = []
-    Return('group') 
+    Return('group')