[BSP]添加nrf52840的.ci文件，修复因rt_hw_pin_init引起的finsh警告，修复rtc编译报错 (#9583)

添加nrf52840的.ci文件，修复因rt_hw_pin_init引起的finsh警告，修复rtc编译报错

bsp/nrf5x/libraries/drivers/drv_gpio.c

@@ -356,7 +356,7 @@ const static struct rt_pin_ops _nrf5x_pin_ops =
     RT_NULL,
 };
 
-rt_err_t rt_hw_pin_init(void)
+int rt_hw_pin_init(void)
 {
     nrfx_err_t err_code;
 

bsp/nrf5x/libraries/drivers/drv_gpio.h

@@ -38,7 +38,7 @@ struct pin_index
     rt_base_t pin;
 };
 
-rt_err_t rt_hw_pin_init(void);
+int rt_hw_pin_init(void);
 
 #endif /* __DRV_GPIO_H__ */
 

bsp/nrf5x/libraries/drivers/drv_rtc.c

@@ -35,7 +35,7 @@
 
 #define TICK_FREQUENCE_HZ        (RT_TICK_PER_SECOND)     // RTC tick frequence, in HZ
 
-static struct rt_device rtc;
+static struct rt_rtc_device rtc;
 static time_t init_time;
 static uint32_t tick = 0;
 
@@ -112,79 +112,13 @@ const static struct rt_device_ops rtc_ops =
 };
 #endif
 
-#if defined(SOC_NRF5340)
-static rt_err_t rt_hw_rtc_register_5340(rt_device_t device, const char *name, rt_uint32_t flag)
-{
-    struct tm time_new = ONCHIP_RTC_TIME_DEFAULT;
-
-    RT_ASSERT(device != RT_NULL);
-
-    init_time = timegm(&time_new);
-    if (rt_rtc_config(device) != RT_EOK)
-    {
-        return -RT_ERROR;
-    }
-#ifdef RT_USING_DEVICE_OPS
-    device->ops         = &rtc_ops;
-#else
-    device->init        = RT_NULL;
-    device->open        = RT_NULL;
-    device->close       = RT_NULL;
-    device->read        = RT_NULL;
-    device->write       = RT_NULL;
-    device->control     = rt_rtc_control;
-#endif
-    device->type        = RT_Device_Class_RTC;
-    device->rx_indicate = RT_NULL;
-    device->tx_complete = RT_NULL;
-    device->user_data   = RT_NULL;
-
-    /* register a character device */
-    rt_device_register(device, name, flag);
-
-    return RT_EOK;
-}
-#else
-static rt_err_t rt_hw_rtc_register(rt_device_t device, const char *name, rt_uint32_t flag)
-{
-    struct tm time_new = ONCHIP_RTC_TIME_DEFAULT;
-
-    RT_ASSERT(device != RT_NULL);
 
-    init_time = timegm(&time_new);
-    if (rt_rtc_config(device) != RT_EOK)
-    {
-        return -RT_ERROR;
-    }
-#ifdef RT_USING_DEVICE_OPS
-    device->ops         = &rtc_ops;
-#else
-    device->init        = RT_NULL;
-    device->open        = RT_NULL;
-    device->close       = RT_NULL;
-    device->read        = RT_NULL;
-    device->write       = RT_NULL;
-    device->control     = rt_rtc_control;
-#endif
-    device->type        = RT_Device_Class_RTC;
-    device->rx_indicate = RT_NULL;
-    device->tx_complete = RT_NULL;
-    device->user_data   = RT_NULL;
-
-    /* register a character device */
-    rt_device_register(device, name, flag);
-
-    return RT_EOK;
-}
-#endif
 int rt_hw_rtc_init(void)
 {
     rt_err_t result;
-#if defined(SOC_NRF5340)
-        result = rt_hw_rtc_register_5340(&rtc, "rtc", RT_DEVICE_FLAG_RDWR);
-#else
-    result = rt_hw_rtc_register(&rtc, "rtc", RT_DEVICE_FLAG_RDWR);
-#endif
+
+    result = rt_hw_rtc_register(&rtc, "rtc", RT_DEVICE_FLAG_RDWR,RT_NULL);
+
     if (result != RT_EOK)
     {
         LOG_E("rtc register err code: %d", result);

bsp/nrf5x/nrf52840/.ci/attachconfig/devices/adc.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_SAADC=y

bsp/nrf5x/nrf52840/.ci/attachconfig/devices/flash.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_ON_CHIP_FLASH=y

bsp/nrf5x/nrf52840/.ci/attachconfig/devices/gpio.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_GPIO=y

bsp/nrf5x/nrf52840/.ci/attachconfig/devices/hwtimer.attach

@@ -0,0 +1,2 @@
+CONFIG_BSP_USING_TIM=y
+CONFIG_BSP_USING_TIM0=y

bsp/nrf5x/nrf52840/.ci/attachconfig/devices/i2c.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_I2C=y

bsp/nrf5x/nrf52840/.ci/attachconfig/devices/pwm.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_PWM=y

bsp/nrf5x/nrf52840/.ci/attachconfig/devices/qspi_flash.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_QSPI_FLASH=y

bsp/nrf5x/nrf52840/.ci/attachconfig/devices/rtc.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_ONCHIP_RTC=y

bsp/nrf5x/nrf52840/.ci/attachconfig/devices/spi.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_SPI=y

bsp/nrf5x/nrf52840/.ci/attachconfig/devices/uart.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_UART=y

bsp/nrf5x/nrf52840/.ci/attachconfig/devices/wdt.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_WDT=y