[bsp][stm32] 更新f407-robomaster-c板的bsp, 添加stm32定时器8 pwm默认配置 (#6201)

* [bsp][stm32] f407-robomaster-c板, 添加stm32定时器8pwm默认配置

* tab -> space

* 取消DFS选定

Co-authored-by: Meco Man <920369182@qq.com>

bsp/stm32/libraries/HAL_Drivers/config/f4/pwm_config.h

@@ -72,6 +72,17 @@ extern "C" {
 #endif /* PWM5_CONFIG */
 #endif /* BSP_USING_PWM5 */
 
+#ifdef BSP_USING_PWM8
+#ifndef PWM8_CONFIG
+#define PWM8_CONFIG                             \
+    {                                           \
+       .tim_handle.Instance     = TIM8,         \
+       .name                    = "pwm8",       \
+       .channel                 = 0             \
+    }
+#endif /* PWM8_CONFIG */
+#endif /* BSP_USING_PWM8 */
+
 #ifdef BSP_USING_PWM9
 #ifndef PWM9_CONFIG
 #define PWM9_CONFIG                             \

bsp/stm32/stm32f407-robomaster-c/.config

@@ -21,17 +21,20 @@ CONFIG_RT_HOOK_USING_FUNC_PTR=y
 CONFIG_RT_USING_IDLE_HOOK=y
 CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
 CONFIG_IDLE_THREAD_STACK_SIZE=256
-# CONFIG_RT_USING_TIMER_SOFT is not set
+CONFIG_RT_USING_TIMER_SOFT=y
+CONFIG_RT_TIMER_THREAD_PRIO=4
+CONFIG_RT_TIMER_THREAD_STACK_SIZE=512
 
 #
 # kservice optimization
 #
-# CONFIG_RT_KSERVICE_USING_STDLIB is not set
+CONFIG_RT_KSERVICE_USING_STDLIB=y
+# CONFIG_RT_KSERVICE_USING_STDLIB_MEMORY is not set
 # CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
 # CONFIG_RT_USING_TINY_FFS is not set
-# CONFIG_RT_PRINTF_LONGLONG is not set
+# CONFIG_RT_KPRINTF_USING_LONGLONG is not set
 CONFIG_RT_DEBUG=y
-CONFIG_RT_DEBUG_COLOR=y
+# CONFIG_RT_DEBUG_COLOR is not set
 # CONFIG_RT_DEBUG_INIT_CONFIG is not set
 # CONFIG_RT_DEBUG_THREAD_CONFIG is not set
 # CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
@@ -78,7 +81,7 @@ CONFIG_RT_USING_DEVICE=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=128
 CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
-CONFIG_RT_VER_NUM=0x40100
+CONFIG_RT_VER_NUM=0x40101
 CONFIG_ARCH_ARM=y
 CONFIG_RT_USING_CPU_FFS=y
 CONFIG_ARCH_ARM_CORTEX_M=y
@@ -261,6 +264,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set
 # CONFIG_PKG_USING_JOYLINK is not set
 # CONFIG_PKG_USING_EZ_IOT_OS is not set
+# CONFIG_PKG_USING_IOTSHARP_SDK is not set
 # CONFIG_PKG_USING_NIMBLE is not set
 # CONFIG_PKG_USING_LLSYNC_SDK_ADAPTER is not set
 # CONFIG_PKG_USING_OTA_DOWNLOADER is not set
@@ -294,12 +298,14 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_HM is not set
 # CONFIG_PKG_USING_SMALL_MODBUS is not set
 # CONFIG_PKG_USING_NET_SERVER is not set
+# CONFIG_PKG_USING_ZFTP is not set
 
 #
 # security packages
 #
 # CONFIG_PKG_USING_MBEDTLS is not set
 # CONFIG_PKG_USING_LIBSODIUM is not set
+# CONFIG_PKG_USING_LIBHYDROGEN is not set
 # CONFIG_PKG_USING_TINYCRYPT is not set
 # CONFIG_PKG_USING_TFM is not set
 # CONFIG_PKG_USING_YD_CRYPTO is not set
@@ -317,6 +323,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_RAPIDJSON is not set
 # CONFIG_PKG_USING_JSMN is not set
 # CONFIG_PKG_USING_AGILE_JSMN is not set
+# CONFIG_PKG_USING_PARSON is not set
 
 #
 # XML: Extensible Markup Language
@@ -328,6 +335,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_JERRYSCRIPT is not set
 # CONFIG_PKG_USING_MICROPYTHON is not set
 # CONFIG_PKG_USING_PIKASCRIPT is not set
+# CONFIG_PKG_USING_RTT_RUST is not set
 
 #
 # multimedia packages
@@ -339,6 +347,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_LVGL is not set
 # CONFIG_PKG_USING_LITTLEVGL2RTT is not set
 # CONFIG_PKG_USING_LV_MUSIC_DEMO is not set
+# CONFIG_PKG_USING_GUI_GUIDER_DEMO is not set
 
 #
 # u8g2: a monochrome graphic library
@@ -414,6 +423,9 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_FDT is not set
 # CONFIG_PKG_USING_CBOX is not set
 # CONFIG_PKG_USING_SNOWFLAKE is not set
+# CONFIG_PKG_USING_HASH_MATCH is not set
+# CONFIG_PKG_USING_FIRE_PID_CURVE is not set
+# CONFIG_PKG_USING_ARMV7M_DWT_TOOL is not set
 
 #
 # system packages
@@ -426,14 +438,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_RT_KPRINTF_THREADSAFE is not set
 # CONFIG_PKG_USING_RT_VSNPRINTF_FULL is not set
 
-#
-# POSIX extension functions
-#
-# CONFIG_PKG_USING_POSIX_GETLINE is not set
-# CONFIG_PKG_USING_POSIX_WCWIDTH is not set
-# CONFIG_PKG_USING_POSIX_ITOA is not set
-# CONFIG_PKG_USING_POSIX_STRINGS is not set
-
 #
 # acceleration: Assembly language or algorithmic acceleration packages
 #
@@ -445,6 +449,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CMSIS: ARM Cortex-M Microcontroller Software Interface Standard
 #
 # CONFIG_PKG_USING_CMSIS_5 is not set
+# CONFIG_PKG_USING_CMSIS_RTOS1 is not set
 # CONFIG_PKG_USING_CMSIS_RTOS2 is not set
 
 #
@@ -457,9 +462,11 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_UC_COMMON is not set
 # CONFIG_PKG_USING_UC_MODBUS is not set
 # CONFIG_PKG_USING_RTDUINO is not set
+# CONFIG_PKG_USING_FREERTOS_WRAPPER is not set
 # CONFIG_PKG_USING_CAIRO is not set
 # CONFIG_PKG_USING_PIXMAN is not set
 # CONFIG_PKG_USING_PARTITION is not set
+# CONFIG_PKG_USING_PERF_COUNTER is not set
 # CONFIG_PKG_USING_FLASHDB is not set
 # CONFIG_PKG_USING_SQLITE is not set
 # CONFIG_PKG_USING_RTI is not set
@@ -487,6 +494,8 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_TINYUSB is not set
 # CONFIG_PKG_USING_CHERRYUSB is not set
 # CONFIG_PKG_USING_KMULTI_RTIMER is not set
+# CONFIG_PKG_USING_TFDB is not set
+# CONFIG_PKG_USING_QPC is not set
 
 #
 # peripheral libraries and drivers
@@ -495,8 +504,10 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_REALTEK_AMEBA is not set
 # CONFIG_PKG_USING_SHT2X is not set
 # CONFIG_PKG_USING_SHT3X is not set
+# CONFIG_PKG_USING_ADT74XX is not set
 # CONFIG_PKG_USING_AS7341 is not set
 # CONFIG_PKG_USING_STM32_SDIO is not set
+# CONFIG_PKG_USING_RTT_ESP_IDF is not set
 # CONFIG_PKG_USING_ICM20608 is not set
 # CONFIG_PKG_USING_BUTTON is not set
 # CONFIG_PKG_USING_PCF8574 is not set
@@ -508,6 +519,11 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_NRF5X_SDK is not set
 # CONFIG_PKG_USING_NRFX is not set
 # CONFIG_PKG_USING_WM_LIBRARIES is not set
+
+#
+# Kendryte SDK
+#
+# CONFIG_PKG_USING_K210_SDK is not set
 # CONFIG_PKG_USING_KENDRYTE_SDK is not set
 # CONFIG_PKG_USING_INFRARED is not set
 # CONFIG_PKG_USING_MULTI_INFRARED is not set
@@ -568,6 +584,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_MB85RS16 is not set
 # CONFIG_PKG_USING_CW2015 is not set
 # CONFIG_PKG_USING_RFM300 is not set
+# CONFIG_PKG_USING_IO_INPUT_FILTER is not set
 
 #
 # AI packages
@@ -641,6 +658,8 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_CONTROLLER is not set
 # CONFIG_PKG_USING_PHASE_LOCKED_LOOP is not set
 # CONFIG_PKG_USING_MFBD is not set
+# CONFIG_PKG_USING_SLCAN2RTT is not set
+# CONFIG_PKG_USING_SOEM is not set
 CONFIG_SOC_FAMILY_STM32=y
 CONFIG_SOC_SERIES_STM32F4=y
 
@@ -660,6 +679,13 @@ CONFIG_BSP_USING_GPIO=y
 CONFIG_BSP_USING_UART=y
 CONFIG_BSP_USING_UART1=y
 # CONFIG_BSP_UART1_RX_USING_DMA is not set
+# CONFIG_BSP_USING_UART3 is not set
+# CONFIG_BSP_USING_UART6 is not set
+# CONFIG_BSP_USING_CAN is not set
+# CONFIG_BSP_USING_PWM is not set
+# CONFIG_BSP_USING_ADC is not set
+# CONFIG_BSP_USING_SPI is not set
+# CONFIG_BSP_USING_I2C1 is not set
 # CONFIG_BSP_USING_RNG is not set
 # CONFIG_BSP_USING_UDID is not set
 

bsp/stm32/stm32f407-robomaster-c/README.md

@@ -24,10 +24,14 @@ Robomaster 开发板C型 是大疆创新科技有限公司推出的一款基于
 
 该开发板常用 **板载资源** 如下：
 
-- MCU: STM32F407IGH6TR, 168MHz Freq, 1024KB FLASH, 192KB RAM(含64KB CCM RAM)。
+- MCU：STM32F407IGH6TR, 主频 168MHz, 1024KB FLASH, 192KB RAM(含64KB CCM RAM)
+- 常用外设
+  - 三色 LED：LED_R(PH12), LED_G(PH11), LED_B(PH11), 
+  - 按键：KEY(PA0)
+  - 电压检测：ADC_BAT(PF10)
+- 常用接口：UART 接口、CAN 总线接口、PWM 接口
 - 调试接口：SWD
-- 常用外设：用户自定义 LED、按键、蜂鸣器、六轴惯性测量单元和磁力计、电压检测 ADC。
-- 常用接口：5V 接口、BOOT 配置接口、micro USB 接口、可配置 I/O 接口、UART 接口、CAN 总线接口、PWM 接口、DBUS接口、数字摄像头 FPC 接口。
+
 
 开发板的用户手册：[RoboMaster 开发板 C 型用户手册.pdf](https://rm-static.djicdn.com/tem/35228/RoboMaster%20%20%E5%BC%80%E5%8F%91%E6%9D%BF%20C%20%E5%9E%8B%E7%94%A8%E6%88%B7%E6%89%8B%E5%86%8C.pdf)
 
@@ -43,14 +47,11 @@ Robomaster 开发板C型 是大疆创新科技有限公司推出的一款基于
 | IST8310      |   暂不支持   | 三轴磁力计                           |
 | **片上外设** | **支持情况** | **备注**                             |
 | GPIO         |     支持     | PA0, PA1... PH1 ---> PIN: 0, 1...144 |
-| UART         |     支持     | UART1,  UART3(DBUS),  UART6          |
-| CAN          |   下阶段支持   | CAN1, CAN2                           |
-| PWM          |   下阶段支持   |                                      |
-| SPI          |   下阶段支持   | BMI088, 用户SPI接口 |
-| I2C          |   下阶段支持   | IST8310, 用户 I2C 接口 |
-| USB          |   暂不支持   |                                      |
-| **扩展模块** | **支持情况** | **备注**                             |
-| 无           |              |                                      |
+| UART         |     支持     | UART1(FinSH),  UART3(DBUS),  UART6          |
+| CAN          |     支持    | CAN1, CAN2                           |
+| PWM          |   支持   | TIM1(CH1/2/3/4), TIM4(CH3), TIM8(CH1/2/3)  |
+| SPI          |   支持   | SPI2 |
+| IIC          |   支持   | 模拟IIC(SDA-->PF0, SCL-->PF1) |
 
 ## 使用说明
 
@@ -83,20 +84,20 @@ Robomaster 开发板C型 是大疆创新科技有限公司推出的一款基于
 
 下载程序成功之后，系统会自动运行，观察开发板上 LED 的运行效果，LED 会以蓝光进行周期性闪烁。
 
-此 BSP 的 FinSH 默认使用串口 1 (C板外壳上标有UART2的4Pin接口)，在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息:
+此 BSP 的 FinSH 默认使用串口 1 ( C 板外壳上标有 UART2 的 4Pin 接口)，在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息:
 
 ```bash
  \ | /
 - RT -     Thread Operating System
- / | \     4.0.4 build Jun 30 2021
- 2006 - 2021 Copyright by rt-thread team
+ / | \     4.1.1 build Jul 29 2022 23:31:38
+ 2006 - 2022 Copyright by RT-Thread team
 msh >
 ```
 > 终端工具推荐使用 [MobaXterm](https://mobaxterm.mobatek.net/) 或 [Xshell](https://www.netsarang.com/en/free-for-home-school/)，均有免费的个人版本
 
 ### 进阶使用
 
-此 BSP 默认只开启了 GPIO 和 串口 2 的功能，更多高级功能需要利用 ENV 工具对 BSP 进行配置，步骤如下：
+此 BSP 默认只开启了 GPIO 和 UART1(丝印为 UART2 4pin 接口) 的功能，更多高级功能需要利用 ENV 工具对 BSP 进行配置，步骤如下：
 
 1. 在 BSP 下打开 env 工具。
 
@@ -117,4 +118,6 @@ msh >
 
 维护人:
 
-- [crazt](https://github.com/CraztTnspt) ，邮箱：<crazt@foxmail.com>
+- [crazt](https://github.com/CraztTnspt) ，邮箱：<crazt@foxmail.com>
+- [Meng](https://github.com/Meng2025) ，邮箱：<m@njust.edu.cn>
+

bsp/stm32/stm32f407-robomaster-c/applications/main.c

@@ -13,7 +13,7 @@
 #include <rtdevice.h>
 #include <board.h>
 
-/* defined the LED Blue pin: PB1 */
+/* defined the LED Blue pin: PH10 */
 #define LED_B_PIN    GET_PIN(H, 10)
 
 int main(void)

bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/CubeMX_Config.ioc

@@ -1,39 +1,85 @@
 #MicroXplorer Configuration settings - do not modify
+ADC3.Channel-1\#ChannelRegularConversion=ADC_CHANNEL_8
+ADC3.IPParameters=Rank-1\#ChannelRegularConversion,Channel-1\#ChannelRegularConversion,SamplingTime-1\#ChannelRegularConversion,NbrOfConversionFlag
+ADC3.NbrOfConversionFlag=1
+ADC3.Rank-1\#ChannelRegularConversion=1
+ADC3.SamplingTime-1\#ChannelRegularConversion=ADC_SAMPLETIME_3CYCLES
+CAN1.BS1=CAN_BS1_1TQ
+CAN1.BS2=CAN_BS2_1TQ
+CAN1.CalculateBaudRate=875000
+CAN1.CalculateTimeBit=1142
+CAN1.CalculateTimeQuantum=380.95238095238096
+CAN1.IPParameters=CalculateTimeQuantum,CalculateTimeBit,CalculateBaudRate,BS1,BS2
+CAN2.BS1=CAN_BS1_1TQ
+CAN2.BS2=CAN_BS2_1TQ
+CAN2.CalculateBaudRate=875000
+CAN2.CalculateTimeBit=1142
+CAN2.CalculateTimeQuantum=380.95238095238096
+CAN2.IPParameters=CalculateTimeQuantum,CalculateTimeBit,CalculateBaudRate,BS1,BS2
 File.Version=6
 GPIO.groupedBy=
 KeepUserPlacement=false
+Mcu.CPN=STM32F407IGH6
 Mcu.Family=STM32F4
-Mcu.IP0=NVIC
-Mcu.IP1=RCC
-Mcu.IP2=SYS
-Mcu.IP3=USART1
-Mcu.IPNb=4
+Mcu.IP0=ADC3
+Mcu.IP1=CAN1
+Mcu.IP10=USART3
+Mcu.IP11=USART6
+Mcu.IP2=CAN2
+Mcu.IP3=NVIC
+Mcu.IP4=RCC
+Mcu.IP5=SYS
+Mcu.IP6=TIM1
+Mcu.IP7=TIM4
+Mcu.IP8=TIM8
+Mcu.IP9=USART1
+Mcu.IPNb=12
 Mcu.Name=STM32F407I(E-G)Hx
 Mcu.Package=UFBGA176
-Mcu.Pin0=PA14
-Mcu.Pin1=PA13
-Mcu.Pin2=PB7
-Mcu.Pin3=PA9
-Mcu.Pin4=PH0-OSC_IN
-Mcu.Pin5=PH1-OSC_OUT
-Mcu.Pin6=VP_SYS_VS_Systick
-Mcu.PinsNb=7
+Mcu.Pin0=PB5
+Mcu.Pin1=PG14
+Mcu.Pin10=PI6
+Mcu.Pin11=PG9
+Mcu.Pin12=PD1
+Mcu.Pin13=PA9
+Mcu.Pin14=PH0-OSC_IN
+Mcu.Pin15=PH1-OSC_OUT
+Mcu.Pin16=PC6
+Mcu.Pin17=PF10
+Mcu.Pin18=PD14
+Mcu.Pin19=PE13
+Mcu.Pin2=PA14
+Mcu.Pin20=PE9
+Mcu.Pin21=PE11
+Mcu.Pin22=PE14
+Mcu.Pin23=VP_SYS_VS_Systick
+Mcu.Pin24=VP_TIM1_VS_ClockSourceINT
+Mcu.Pin25=VP_TIM4_VS_ClockSourceINT
+Mcu.Pin26=VP_TIM8_VS_ClockSourceINT
+Mcu.Pin3=PA13
+Mcu.Pin4=PB7
+Mcu.Pin5=PB6
+Mcu.Pin6=PD0
+Mcu.Pin7=PC11
+Mcu.Pin8=PC10
+Mcu.Pin9=PI7
+Mcu.PinsNb=27
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32F407IGHx
-MxCube.Version=6.1.2
-MxDb.Version=DB.6.0.10
-NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+MxCube.Version=6.6.1
+MxDb.Version=DB.6.0.60
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
 NVIC.ForceEnableDMAVector=true
-NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
 NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
-NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
-NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
-NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:false
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
 PA13.Mode=Serial_Wire
 PA13.Signal=SYS_JTMS-SWDIO
 PA14.Mode=Serial_Wire
@@ -42,14 +88,48 @@ PA9.GPIOParameters=GPIO_PuPd
 PA9.GPIO_PuPd=GPIO_PULLUP
 PA9.Mode=Asynchronous
 PA9.Signal=USART1_TX
+PB5.Mode=CAN_Activate
+PB5.Signal=CAN2_RX
+PB6.Mode=CAN_Activate
+PB6.Signal=CAN2_TX
 PB7.GPIOParameters=GPIO_PuPd
 PB7.GPIO_PuPd=GPIO_PULLUP
 PB7.Mode=Asynchronous
 PB7.Signal=USART1_RX
+PC10.Mode=Asynchronous
+PC10.Signal=USART3_TX
+PC11.Mode=Asynchronous
+PC11.Signal=USART3_RX
+PC6.Locked=true
+PC6.Signal=S_TIM8_CH1
+PD0.Locked=true
+PD0.Mode=CAN_Activate
+PD0.Signal=CAN1_RX
+PD1.Locked=true
+PD1.Mode=CAN_Activate
+PD1.Signal=CAN1_TX
+PD14.Locked=true
+PD14.Signal=S_TIM4_CH3
+PE11.Signal=S_TIM1_CH2
+PE13.Locked=true
+PE13.Signal=S_TIM1_CH3
+PE14.Locked=true
+PE14.Signal=S_TIM1_CH4
+PE9.Locked=true
+PE9.Signal=S_TIM1_CH1
+PF10.Locked=true
+PF10.Mode=IN8
+PF10.Signal=ADC3_IN8
+PG14.Mode=Asynchronous
+PG14.Signal=USART6_TX
+PG9.Mode=Asynchronous
+PG9.Signal=USART6_RX
 PH0-OSC_IN.Mode=HSE-External-Oscillator
 PH0-OSC_IN.Signal=RCC_OSC_IN
 PH1-OSC_OUT.Mode=HSE-External-Oscillator
 PH1-OSC_OUT.Signal=RCC_OSC_OUT
+PI6.Signal=S_TIM8_CH2
+PI7.Signal=S_TIM8_CH3
 PinOutPanel.CurrentBGAView=Top
 PinOutPanel.RotationAngle=0
 ProjectManager.AskForMigrate=true
@@ -61,7 +141,7 @@ ProjectManager.CustomerFirmwarePackage=
 ProjectManager.DefaultFWLocation=true
 ProjectManager.DeletePrevious=true
 ProjectManager.DeviceId=STM32F407IGHx
-ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.25.2
+ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.27.1
 ProjectManager.FreePins=false
 ProjectManager.HalAssertFull=false
 ProjectManager.HeapSize=0x200
@@ -79,7 +159,7 @@ ProjectManager.StackSize=0x400
 ProjectManager.TargetToolchain=MDK-ARM V5
 ProjectManager.ToolChainLocation=
 ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_ADC3_Init-ADC3-false-HAL-true,5-MX_CAN1_Init-CAN1-false-HAL-true,6-MX_CAN2_Init-CAN2-false-HAL-true,7-MX_TIM1_Init-TIM1-false-HAL-true,8-MX_TIM4_Init-TIM4-false-HAL-true,9-MX_TIM8_Init-TIM8-false-HAL-true,10-MX_USART3_UART_Init-USART3-false-HAL-true,11-MX_USART6_UART_Init-USART6-false-HAL-true
 RCC.48MHZClocksFreq_Value=84000000
 RCC.AHBFreq_Value=168000000
 RCC.APB1CLKDivider=RCC_HCLK_DIV4
@@ -113,8 +193,45 @@ RCC.VCOI2SOutputFreq_Value=384000000
 RCC.VCOInputFreq_Value=2000000
 RCC.VCOOutputFreq_Value=336000000
 RCC.VcooutputI2S=192000000
+SH.S_TIM1_CH1.0=TIM1_CH1,PWM Generation1 CH1
+SH.S_TIM1_CH1.ConfNb=1
+SH.S_TIM1_CH2.0=TIM1_CH2,PWM Generation2 CH2
+SH.S_TIM1_CH2.ConfNb=1
+SH.S_TIM1_CH3.0=TIM1_CH3,PWM Generation3 CH3
+SH.S_TIM1_CH3.ConfNb=1
+SH.S_TIM1_CH4.0=TIM1_CH4,PWM Generation4 CH4
+SH.S_TIM1_CH4.ConfNb=1
+SH.S_TIM4_CH3.0=TIM4_CH3,PWM Generation3 CH3
+SH.S_TIM4_CH3.ConfNb=1
+SH.S_TIM8_CH1.0=TIM8_CH1,PWM Generation1 CH1
+SH.S_TIM8_CH1.ConfNb=1
+SH.S_TIM8_CH2.0=TIM8_CH2,PWM Generation2 CH2
+SH.S_TIM8_CH2.ConfNb=1
+SH.S_TIM8_CH3.0=TIM8_CH3,PWM Generation3 CH3
+SH.S_TIM8_CH3.ConfNb=1
+TIM1.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
+TIM1.Channel-PWM\ Generation2\ CH2=TIM_CHANNEL_2
+TIM1.Channel-PWM\ Generation3\ CH3=TIM_CHANNEL_3
+TIM1.Channel-PWM\ Generation4\ CH4=TIM_CHANNEL_4
+TIM1.IPParameters=Channel-PWM Generation1 CH1,Channel-PWM Generation2 CH2,Channel-PWM Generation3 CH3,Channel-PWM Generation4 CH4
+TIM4.Channel-PWM\ Generation3\ CH3=TIM_CHANNEL_3
+TIM4.IPParameters=Channel-PWM Generation3 CH3
+TIM8.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1
+TIM8.Channel-PWM\ Generation2\ CH2=TIM_CHANNEL_2
+TIM8.Channel-PWM\ Generation3\ CH3=TIM_CHANNEL_3
+TIM8.IPParameters=Channel-PWM Generation1 CH1,Channel-PWM Generation2 CH2,Channel-PWM Generation3 CH3
 USART1.IPParameters=VirtualMode
 USART1.VirtualMode=VM_ASYNC
+USART3.IPParameters=VirtualMode
+USART3.VirtualMode=VM_ASYNC
+USART6.IPParameters=VirtualMode
+USART6.VirtualMode=VM_ASYNC
 VP_SYS_VS_Systick.Mode=SysTick
 VP_SYS_VS_Systick.Signal=SYS_VS_Systick
+VP_TIM1_VS_ClockSourceINT.Mode=Internal
+VP_TIM1_VS_ClockSourceINT.Signal=TIM1_VS_ClockSourceINT
+VP_TIM4_VS_ClockSourceINT.Mode=Internal
+VP_TIM4_VS_ClockSourceINT.Signal=TIM4_VS_ClockSourceINT
+VP_TIM8_VS_ClockSourceINT.Mode=Internal
+VP_TIM8_VS_ClockSourceINT.Signal=TIM8_VS_ClockSourceINT
 board=custom

bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Inc/main.h

@@ -50,6 +50,8 @@ extern "C" {
 
 /* USER CODE END EM */
 
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
+
 /* Exported functions prototypes ---------------------------------------------*/
 void Error_Handler(void);
 
@@ -67,5 +69,3 @@ void Error_Handler(void);
 #endif
 
 #endif /* __MAIN_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h

@@ -1,3 +1,4 @@
+/* USER CODE BEGIN Header */
 /**
   ******************************************************************************
   * @file    stm32f4xx_hal_conf_template.h
@@ -8,16 +9,16 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
-  * All rights reserved.</center></h2>
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
   *
-  * This software component is licensed by ST under BSD 3-Clause license,
-  * the "License"; You may not use this file except in compliance with the
-  * License. You may obtain a copy of the License at:
-  *                        opensource.org/licenses/BSD-3-Clause
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
   *
   ******************************************************************************
   */
+/* USER CODE END Header */
 
 /* Define to prevent recursive inclusion -------------------------------------*/
 #ifndef __STM32F4xx_HAL_CONF_H
@@ -36,9 +37,9 @@
   */
 #define HAL_MODULE_ENABLED
 
-  /* #define HAL_ADC_MODULE_ENABLED   */
+  #define HAL_ADC_MODULE_ENABLED
 /* #define HAL_CRYP_MODULE_ENABLED   */
-/* #define HAL_CAN_MODULE_ENABLED   */
+#define HAL_CAN_MODULE_ENABLED
 /* #define HAL_CRC_MODULE_ENABLED   */
 /* #define HAL_CAN_LEGACY_MODULE_ENABLED   */
 /* #define HAL_CRYP_MODULE_ENABLED   */
@@ -61,8 +62,8 @@
 /* #define HAL_SAI_MODULE_ENABLED   */
 /* #define HAL_SD_MODULE_ENABLED   */
 /* #define HAL_MMC_MODULE_ENABLED   */
-/* #define HAL_SPI_MODULE_ENABLED   */
-/* #define HAL_TIM_MODULE_ENABLED   */
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
 #define HAL_UART_MODULE_ENABLED
 /* #define HAL_USART_MODULE_ENABLED   */
 /* #define HAL_IRDA_MODULE_ENABLED   */
@@ -76,6 +77,7 @@
 /* #define HAL_QSPI_MODULE_ENABLED   */
 /* #define HAL_CEC_MODULE_ENABLED   */
 /* #define HAL_FMPI2C_MODULE_ENABLED   */
+/* #define HAL_FMPSMBUS_MODULE_ENABLED   */
 /* #define HAL_SPDIFRX_MODULE_ENABLED   */
 /* #define HAL_DFSDM_MODULE_ENABLED   */
 /* #define HAL_LPTIM_MODULE_ENABLED   */
@@ -94,11 +96,11 @@
   *        (when HSE is used as system clock source, directly or through the PLL).
   */
 #if !defined  (HSE_VALUE)
-  #define HSE_VALUE    ((uint32_t)12000000U) /*!< Value of the External oscillator in Hz */
+  #define HSE_VALUE    12000000U /*!< Value of the External oscillator in Hz */
 #endif /* HSE_VALUE */
 
 #if !defined  (HSE_STARTUP_TIMEOUT)
-  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100U)   /*!< Time out for HSE start up, in ms */
+  #define HSE_STARTUP_TIMEOUT    100U   /*!< Time out for HSE start up, in ms */
 #endif /* HSE_STARTUP_TIMEOUT */
 
 /**
@@ -114,7 +116,7 @@
   * @brief Internal Low Speed oscillator (LSI) value.
   */
 #if !defined  (LSI_VALUE)
- #define LSI_VALUE  ((uint32_t)32000U)       /*!< LSI Typical Value in Hz*/
+ #define LSI_VALUE  32000U       /*!< LSI Typical Value in Hz*/
 #endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
                                              The real value may vary depending on the variations
                                              in voltage and temperature.*/
@@ -122,11 +124,11 @@
   * @brief External Low Speed oscillator (LSE) value.
   */
 #if !defined  (LSE_VALUE)
- #define LSE_VALUE  ((uint32_t)32768U)    /*!< Value of the External Low Speed oscillator in Hz */
+ #define LSE_VALUE  32768U    /*!< Value of the External Low Speed oscillator in Hz */
 #endif /* LSE_VALUE */
 
 #if !defined  (LSE_STARTUP_TIMEOUT)
-  #define LSE_STARTUP_TIMEOUT    ((uint32_t)5000U)   /*!< Time out for LSE start up, in ms */
+  #define LSE_STARTUP_TIMEOUT    5000U   /*!< Time out for LSE start up, in ms */
 #endif /* LSE_STARTUP_TIMEOUT */
 
 /**
@@ -135,7 +137,7 @@
   *        frequency, this source is inserted directly through I2S_CKIN pad.
   */
 #if !defined  (EXTERNAL_CLOCK_VALUE)
-  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/
+  #define EXTERNAL_CLOCK_VALUE    12288000U /*!< Value of the External audio frequency in Hz*/
 #endif /* EXTERNAL_CLOCK_VALUE */
 
 /* Tip: To avoid modifying this file each time you need to use different HSE,
@@ -145,8 +147,8 @@
 /**
   * @brief This is the HAL system configuration section
   */
-#define  VDD_VALUE            ((uint32_t)3300U) /*!< Value of VDD in mv */
-#define  TICK_INT_PRIORITY            ((uint32_t)0U)   /*!< tick interrupt priority */
+#define  VDD_VALUE		      3300U /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            0U   /*!< tick interrupt priority */
 #define  USE_RTOS                     0U
 #define  PREFETCH_ENABLE              1U
 #define  INSTRUCTION_CACHE_ENABLE     1U
@@ -166,6 +168,7 @@
 #define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
 #define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
 #define  USE_HAL_FMPI2C_REGISTER_CALLBACKS      0U /* FMPI2C register callback disabled    */
+#define  USE_HAL_FMPSMBUS_REGISTER_CALLBACKS    0U /* FMPSMBUS register callback disabled  */
 #define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
 #define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
 #define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
@@ -213,20 +216,20 @@
 /* Definition of the Ethernet driver buffers size and count */
 #define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
 #define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
-#define ETH_RXBUFNB                    ((uint32_t)4U)       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
-#define ETH_TXBUFNB                    ((uint32_t)4U)       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+#define ETH_RXBUFNB                    4U       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    4U       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
 
 /* Section 2: PHY configuration section */
 
 /* DP83848_PHY_ADDRESS Address*/
 #define DP83848_PHY_ADDRESS           0x01U
 /* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
-#define PHY_RESET_DELAY                 ((uint32_t)0x000000FFU)
+#define PHY_RESET_DELAY                 0x000000FFU
 /* PHY Configuration delay */
-#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFFU)
+#define PHY_CONFIG_DELAY                0x00000FFFU
 
-#define PHY_READ_TO                     ((uint32_t)0x0000FFFFU)
-#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFFU)
+#define PHY_READ_TO                     0x0000FFFFU
+#define PHY_WRITE_TO                    0x0000FFFFU
 
 /* Section 3: Common PHY Registers */
 
@@ -444,6 +447,10 @@
  #include "stm32f4xx_hal_fmpi2c.h"
 #endif /* HAL_FMPI2C_MODULE_ENABLED */
 
+#ifdef HAL_FMPSMBUS_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpsmbus.h"
+#endif /* HAL_FMPSMBUS_MODULE_ENABLED */
+
 #ifdef HAL_SPDIFRX_MODULE_ENABLED
  #include "stm32f4xx_hal_spdifrx.h"
 #endif /* HAL_SPDIFRX_MODULE_ENABLED */
@@ -482,5 +489,3 @@
 #endif
 
 #endif /* __STM32F4xx_HAL_CONF_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Inc/stm32f4xx_it.h

@@ -65,5 +65,3 @@ void SysTick_Handler(void);
 #endif
 
 #endif /* __STM32F4xx_IT_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Src/main.c

@@ -0,0 +1,728 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file           : main.c
+  * @brief          : Main program body
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2022 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN PTD */
+
+/* USER CODE END PTD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+ADC_HandleTypeDef hadc3;
+
+CAN_HandleTypeDef hcan1;
+CAN_HandleTypeDef hcan2;
+
+SPI_HandleTypeDef hspi2;
+
+TIM_HandleTypeDef htim1;
+TIM_HandleTypeDef htim4;
+TIM_HandleTypeDef htim8;
+
+UART_HandleTypeDef huart1;
+UART_HandleTypeDef huart3;
+UART_HandleTypeDef huart6;
+
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+void SystemClock_Config(void);
+static void MX_GPIO_Init(void);
+static void MX_USART1_UART_Init(void);
+static void MX_ADC3_Init(void);
+static void MX_CAN1_Init(void);
+static void MX_CAN2_Init(void);
+static void MX_TIM1_Init(void);
+static void MX_TIM4_Init(void);
+static void MX_TIM8_Init(void);
+static void MX_USART3_UART_Init(void);
+static void MX_USART6_UART_Init(void);
+static void MX_SPI2_Init(void);
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/**
+  * @brief  The application entry point.
+  * @retval int
+  */
+int main(void)
+{
+  /* USER CODE BEGIN 1 */
+
+  /* USER CODE END 1 */
+
+  /* MCU Configuration--------------------------------------------------------*/
+
+  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+  HAL_Init();
+
+  /* USER CODE BEGIN Init */
+
+  /* USER CODE END Init */
+
+  /* Configure the system clock */
+  SystemClock_Config();
+
+  /* USER CODE BEGIN SysInit */
+
+  /* USER CODE END SysInit */
+
+  /* Initialize all configured peripherals */
+  MX_GPIO_Init();
+  MX_USART1_UART_Init();
+  MX_ADC3_Init();
+  MX_CAN1_Init();
+  MX_CAN2_Init();
+  MX_TIM1_Init();
+  MX_TIM4_Init();
+  MX_TIM8_Init();
+  MX_USART3_UART_Init();
+  MX_USART6_UART_Init();
+  MX_SPI2_Init();
+  /* USER CODE BEGIN 2 */
+
+  /* USER CODE END 2 */
+
+  /* Infinite loop */
+  /* USER CODE BEGIN WHILE */
+  while (1)
+  {
+    /* USER CODE END WHILE */
+
+    /* USER CODE BEGIN 3 */
+  }
+  /* USER CODE END 3 */
+}
+
+/**
+  * @brief System Clock Configuration
+  * @retval None
+  */
+void SystemClock_Config(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+
+  /** Configure the main internal regulator output voltage
+  */
+  __HAL_RCC_PWR_CLK_ENABLE();
+  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+  /** Initializes the RCC Oscillators according to the specified parameters
+  * in the RCC_OscInitTypeDef structure.
+  */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLM = 6;
+  RCC_OscInitStruct.PLL.PLLN = 168;
+  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
+  RCC_OscInitStruct.PLL.PLLQ = 4;
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Initializes the CPU, AHB and APB buses clocks
+  */
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
+  {
+    Error_Handler();
+  }
+}
+
+/**
+  * @brief ADC3 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_ADC3_Init(void)
+{
+
+  /* USER CODE BEGIN ADC3_Init 0 */
+
+  /* USER CODE END ADC3_Init 0 */
+
+  ADC_ChannelConfTypeDef sConfig = {0};
+
+  /* USER CODE BEGIN ADC3_Init 1 */
+
+  /* USER CODE END ADC3_Init 1 */
+
+  /** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
+  */
+  hadc3.Instance = ADC3;
+  hadc3.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4;
+  hadc3.Init.Resolution = ADC_RESOLUTION_12B;
+  hadc3.Init.ScanConvMode = DISABLE;
+  hadc3.Init.ContinuousConvMode = DISABLE;
+  hadc3.Init.DiscontinuousConvMode = DISABLE;
+  hadc3.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
+  hadc3.Init.ExternalTrigConv = ADC_SOFTWARE_START;
+  hadc3.Init.DataAlign = ADC_DATAALIGN_RIGHT;
+  hadc3.Init.NbrOfConversion = 1;
+  hadc3.Init.DMAContinuousRequests = DISABLE;
+  hadc3.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
+  if (HAL_ADC_Init(&hadc3) != HAL_OK)
+  {
+    Error_Handler();
+  }
+
+  /** Configure for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
+  */
+  sConfig.Channel = ADC_CHANNEL_8;
+  sConfig.Rank = 1;
+  sConfig.SamplingTime = ADC_SAMPLETIME_3CYCLES;
+  if (HAL_ADC_ConfigChannel(&hadc3, &sConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN ADC3_Init 2 */
+
+  /* USER CODE END ADC3_Init 2 */
+
+}
+
+/**
+  * @brief CAN1 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_CAN1_Init(void)
+{
+
+  /* USER CODE BEGIN CAN1_Init 0 */
+
+  /* USER CODE END CAN1_Init 0 */
+
+  /* USER CODE BEGIN CAN1_Init 1 */
+
+  /* USER CODE END CAN1_Init 1 */
+  hcan1.Instance = CAN1;
+  hcan1.Init.Prescaler = 16;
+  hcan1.Init.Mode = CAN_MODE_NORMAL;
+  hcan1.Init.SyncJumpWidth = CAN_SJW_1TQ;
+  hcan1.Init.TimeSeg1 = CAN_BS1_1TQ;
+  hcan1.Init.TimeSeg2 = CAN_BS2_1TQ;
+  hcan1.Init.TimeTriggeredMode = DISABLE;
+  hcan1.Init.AutoBusOff = DISABLE;
+  hcan1.Init.AutoWakeUp = DISABLE;
+  hcan1.Init.AutoRetransmission = DISABLE;
+  hcan1.Init.ReceiveFifoLocked = DISABLE;
+  hcan1.Init.TransmitFifoPriority = DISABLE;
+  if (HAL_CAN_Init(&hcan1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN CAN1_Init 2 */
+
+  /* USER CODE END CAN1_Init 2 */
+
+}
+
+/**
+  * @brief CAN2 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_CAN2_Init(void)
+{
+
+  /* USER CODE BEGIN CAN2_Init 0 */
+
+  /* USER CODE END CAN2_Init 0 */
+
+  /* USER CODE BEGIN CAN2_Init 1 */
+
+  /* USER CODE END CAN2_Init 1 */
+  hcan2.Instance = CAN2;
+  hcan2.Init.Prescaler = 16;
+  hcan2.Init.Mode = CAN_MODE_NORMAL;
+  hcan2.Init.SyncJumpWidth = CAN_SJW_1TQ;
+  hcan2.Init.TimeSeg1 = CAN_BS1_1TQ;
+  hcan2.Init.TimeSeg2 = CAN_BS2_1TQ;
+  hcan2.Init.TimeTriggeredMode = DISABLE;
+  hcan2.Init.AutoBusOff = DISABLE;
+  hcan2.Init.AutoWakeUp = DISABLE;
+  hcan2.Init.AutoRetransmission = DISABLE;
+  hcan2.Init.ReceiveFifoLocked = DISABLE;
+  hcan2.Init.TransmitFifoPriority = DISABLE;
+  if (HAL_CAN_Init(&hcan2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN CAN2_Init 2 */
+
+  /* USER CODE END CAN2_Init 2 */
+
+}
+
+/**
+  * @brief SPI2 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_SPI2_Init(void)
+{
+
+  /* USER CODE BEGIN SPI2_Init 0 */
+
+  /* USER CODE END SPI2_Init 0 */
+
+  /* USER CODE BEGIN SPI2_Init 1 */
+
+  /* USER CODE END SPI2_Init 1 */
+  /* SPI2 parameter configuration*/
+  hspi2.Instance = SPI2;
+  hspi2.Init.Mode = SPI_MODE_MASTER;
+  hspi2.Init.Direction = SPI_DIRECTION_2LINES;
+  hspi2.Init.DataSize = SPI_DATASIZE_8BIT;
+  hspi2.Init.CLKPolarity = SPI_POLARITY_LOW;
+  hspi2.Init.CLKPhase = SPI_PHASE_1EDGE;
+  hspi2.Init.NSS = SPI_NSS_SOFT;
+  hspi2.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
+  hspi2.Init.FirstBit = SPI_FIRSTBIT_MSB;
+  hspi2.Init.TIMode = SPI_TIMODE_DISABLE;
+  hspi2.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+  hspi2.Init.CRCPolynomial = 10;
+  if (HAL_SPI_Init(&hspi2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN SPI2_Init 2 */
+
+  /* USER CODE END SPI2_Init 2 */
+
+}
+
+/**
+  * @brief TIM1 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_TIM1_Init(void)
+{
+
+  /* USER CODE BEGIN TIM1_Init 0 */
+
+  /* USER CODE END TIM1_Init 0 */
+
+  TIM_ClockConfigTypeDef sClockSourceConfig = {0};
+  TIM_MasterConfigTypeDef sMasterConfig = {0};
+  TIM_OC_InitTypeDef sConfigOC = {0};
+  TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig = {0};
+
+  /* USER CODE BEGIN TIM1_Init 1 */
+
+  /* USER CODE END TIM1_Init 1 */
+  htim1.Instance = TIM1;
+  htim1.Init.Prescaler = 0;
+  htim1.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim1.Init.Period = 65535;
+  htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim1.Init.RepetitionCounter = 0;
+  htim1.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_Base_Init(&htim1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
+  if (HAL_TIM_ConfigClockSource(&htim1, &sClockSourceConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_TIM_PWM_Init(&htim1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+  if (HAL_TIMEx_MasterConfigSynchronization(&htim1, &sMasterConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sConfigOC.OCMode = TIM_OCMODE_PWM1;
+  sConfigOC.Pulse = 0;
+  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
+  sConfigOC.OCNPolarity = TIM_OCNPOLARITY_HIGH;
+  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
+  sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
+  sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
+  if (HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_TIM_PWM_ConfigChannel(&htim1, &sConfigOC, TIM_CHANNEL_4) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sBreakDeadTimeConfig.OffStateRunMode = TIM_OSSR_DISABLE;
+  sBreakDeadTimeConfig.OffStateIDLEMode = TIM_OSSI_DISABLE;
+  sBreakDeadTimeConfig.LockLevel = TIM_LOCKLEVEL_OFF;
+  sBreakDeadTimeConfig.DeadTime = 0;
+  sBreakDeadTimeConfig.BreakState = TIM_BREAK_DISABLE;
+  sBreakDeadTimeConfig.BreakPolarity = TIM_BREAKPOLARITY_HIGH;
+  sBreakDeadTimeConfig.AutomaticOutput = TIM_AUTOMATICOUTPUT_DISABLE;
+  if (HAL_TIMEx_ConfigBreakDeadTime(&htim1, &sBreakDeadTimeConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM1_Init 2 */
+
+  /* USER CODE END TIM1_Init 2 */
+  HAL_TIM_MspPostInit(&htim1);
+
+}
+
+/**
+  * @brief TIM4 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_TIM4_Init(void)
+{
+
+  /* USER CODE BEGIN TIM4_Init 0 */
+
+  /* USER CODE END TIM4_Init 0 */
+
+  TIM_ClockConfigTypeDef sClockSourceConfig = {0};
+  TIM_MasterConfigTypeDef sMasterConfig = {0};
+  TIM_OC_InitTypeDef sConfigOC = {0};
+
+  /* USER CODE BEGIN TIM4_Init 1 */
+
+  /* USER CODE END TIM4_Init 1 */
+  htim4.Instance = TIM4;
+  htim4.Init.Prescaler = 0;
+  htim4.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim4.Init.Period = 65535;
+  htim4.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim4.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_Base_Init(&htim4) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
+  if (HAL_TIM_ConfigClockSource(&htim4, &sClockSourceConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_TIM_PWM_Init(&htim4) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+  if (HAL_TIMEx_MasterConfigSynchronization(&htim4, &sMasterConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sConfigOC.OCMode = TIM_OCMODE_PWM1;
+  sConfigOC.Pulse = 0;
+  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
+  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
+  if (HAL_TIM_PWM_ConfigChannel(&htim4, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM4_Init 2 */
+
+  /* USER CODE END TIM4_Init 2 */
+  HAL_TIM_MspPostInit(&htim4);
+
+}
+
+/**
+  * @brief TIM8 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_TIM8_Init(void)
+{
+
+  /* USER CODE BEGIN TIM8_Init 0 */
+
+  /* USER CODE END TIM8_Init 0 */
+
+  TIM_ClockConfigTypeDef sClockSourceConfig = {0};
+  TIM_MasterConfigTypeDef sMasterConfig = {0};
+  TIM_OC_InitTypeDef sConfigOC = {0};
+  TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig = {0};
+
+  /* USER CODE BEGIN TIM8_Init 1 */
+
+  /* USER CODE END TIM8_Init 1 */
+  htim8.Instance = TIM8;
+  htim8.Init.Prescaler = 0;
+  htim8.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim8.Init.Period = 65535;
+  htim8.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim8.Init.RepetitionCounter = 0;
+  htim8.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_Base_Init(&htim8) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
+  if (HAL_TIM_ConfigClockSource(&htim8, &sClockSourceConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_TIM_PWM_Init(&htim8) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+  if (HAL_TIMEx_MasterConfigSynchronization(&htim8, &sMasterConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sConfigOC.OCMode = TIM_OCMODE_PWM1;
+  sConfigOC.Pulse = 0;
+  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
+  sConfigOC.OCNPolarity = TIM_OCNPOLARITY_HIGH;
+  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
+  sConfigOC.OCIdleState = TIM_OCIDLESTATE_RESET;
+  sConfigOC.OCNIdleState = TIM_OCNIDLESTATE_RESET;
+  if (HAL_TIM_PWM_ConfigChannel(&htim8, &sConfigOC, TIM_CHANNEL_1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_TIM_PWM_ConfigChannel(&htim8, &sConfigOC, TIM_CHANNEL_2) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  if (HAL_TIM_PWM_ConfigChannel(&htim8, &sConfigOC, TIM_CHANNEL_3) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sBreakDeadTimeConfig.OffStateRunMode = TIM_OSSR_DISABLE;
+  sBreakDeadTimeConfig.OffStateIDLEMode = TIM_OSSI_DISABLE;
+  sBreakDeadTimeConfig.LockLevel = TIM_LOCKLEVEL_OFF;
+  sBreakDeadTimeConfig.DeadTime = 0;
+  sBreakDeadTimeConfig.BreakState = TIM_BREAK_DISABLE;
+  sBreakDeadTimeConfig.BreakPolarity = TIM_BREAKPOLARITY_HIGH;
+  sBreakDeadTimeConfig.AutomaticOutput = TIM_AUTOMATICOUTPUT_DISABLE;
+  if (HAL_TIMEx_ConfigBreakDeadTime(&htim8, &sBreakDeadTimeConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM8_Init 2 */
+
+  /* USER CODE END TIM8_Init 2 */
+  HAL_TIM_MspPostInit(&htim8);
+
+}
+
+/**
+  * @brief USART1 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_USART1_UART_Init(void)
+{
+
+  /* USER CODE BEGIN USART1_Init 0 */
+
+  /* USER CODE END USART1_Init 0 */
+
+  /* USER CODE BEGIN USART1_Init 1 */
+
+  /* USER CODE END USART1_Init 1 */
+  huart1.Instance = USART1;
+  huart1.Init.BaudRate = 115200;
+  huart1.Init.WordLength = UART_WORDLENGTH_8B;
+  huart1.Init.StopBits = UART_STOPBITS_1;
+  huart1.Init.Parity = UART_PARITY_NONE;
+  huart1.Init.Mode = UART_MODE_TX_RX;
+  huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+  huart1.Init.OverSampling = UART_OVERSAMPLING_16;
+  if (HAL_UART_Init(&huart1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN USART1_Init 2 */
+
+  /* USER CODE END USART1_Init 2 */
+
+}
+
+/**
+  * @brief USART3 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_USART3_UART_Init(void)
+{
+
+  /* USER CODE BEGIN USART3_Init 0 */
+
+  /* USER CODE END USART3_Init 0 */
+
+  /* USER CODE BEGIN USART3_Init 1 */
+
+  /* USER CODE END USART3_Init 1 */
+  huart3.Instance = USART3;
+  huart3.Init.BaudRate = 115200;
+  huart3.Init.WordLength = UART_WORDLENGTH_8B;
+  huart3.Init.StopBits = UART_STOPBITS_1;
+  huart3.Init.Parity = UART_PARITY_NONE;
+  huart3.Init.Mode = UART_MODE_TX_RX;
+  huart3.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+  huart3.Init.OverSampling = UART_OVERSAMPLING_16;
+  if (HAL_UART_Init(&huart3) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN USART3_Init 2 */
+
+  /* USER CODE END USART3_Init 2 */
+
+}
+
+/**
+  * @brief USART6 Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_USART6_UART_Init(void)
+{
+
+  /* USER CODE BEGIN USART6_Init 0 */
+
+  /* USER CODE END USART6_Init 0 */
+
+  /* USER CODE BEGIN USART6_Init 1 */
+
+  /* USER CODE END USART6_Init 1 */
+  huart6.Instance = USART6;
+  huart6.Init.BaudRate = 115200;
+  huart6.Init.WordLength = UART_WORDLENGTH_8B;
+  huart6.Init.StopBits = UART_STOPBITS_1;
+  huart6.Init.Parity = UART_PARITY_NONE;
+  huart6.Init.Mode = UART_MODE_TX_RX;
+  huart6.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+  huart6.Init.OverSampling = UART_OVERSAMPLING_16;
+  if (HAL_UART_Init(&huart6) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN USART6_Init 2 */
+
+  /* USER CODE END USART6_Init 2 */
+
+}
+
+/**
+  * @brief GPIO Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_GPIO_Init(void)
+{
+
+  /* GPIO Ports Clock Enable */
+  __HAL_RCC_GPIOB_CLK_ENABLE();
+  __HAL_RCC_GPIOG_CLK_ENABLE();
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+  __HAL_RCC_GPIOD_CLK_ENABLE();
+  __HAL_RCC_GPIOC_CLK_ENABLE();
+  __HAL_RCC_GPIOI_CLK_ENABLE();
+  __HAL_RCC_GPIOH_CLK_ENABLE();
+  __HAL_RCC_GPIOF_CLK_ENABLE();
+  __HAL_RCC_GPIOE_CLK_ENABLE();
+
+}
+
+/* USER CODE BEGIN 4 */
+
+/* USER CODE END 4 */
+
+/**
+  * @brief  This function is executed in case of error occurrence.
+  * @retval None
+  */
+void Error_Handler(void)
+{
+  /* USER CODE BEGIN Error_Handler_Debug */
+  /* User can add his own implementation to report the HAL error return state */
+  __disable_irq();
+  while (1)
+  {
+  }
+  /* USER CODE END Error_Handler_Debug */
+}
+
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *         where the assert_param error has occurred.
+  * @param  file: pointer to the source file name
+  * @param  line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t *file, uint32_t line)
+{
+  /* USER CODE BEGIN 6 */
+  /* User can add his own implementation to report the file name and line number,
+     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+  /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */

bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c

@@ -58,7 +58,9 @@
 /* USER CODE BEGIN 0 */
 
 /* USER CODE END 0 */
-/**
+
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
+                                                            /**
   * Initializes the Global MSP.
   */
 void HAL_MspInit(void)
@@ -77,6 +79,425 @@ void HAL_MspInit(void)
   /* USER CODE END MspInit 1 */
 }
 
+/**
+* @brief ADC MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hadc: ADC handle pointer
+* @retval None
+*/
+void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(hadc->Instance==ADC3)
+  {
+  /* USER CODE BEGIN ADC3_MspInit 0 */
+
+  /* USER CODE END ADC3_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_ADC3_CLK_ENABLE();
+
+    __HAL_RCC_GPIOF_CLK_ENABLE();
+    /**ADC3 GPIO Configuration
+    PF10     ------> ADC3_IN8
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_10;
+    GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN ADC3_MspInit 1 */
+
+  /* USER CODE END ADC3_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief ADC MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hadc: ADC handle pointer
+* @retval None
+*/
+void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
+{
+  if(hadc->Instance==ADC3)
+  {
+  /* USER CODE BEGIN ADC3_MspDeInit 0 */
+
+  /* USER CODE END ADC3_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_ADC3_CLK_DISABLE();
+
+    /**ADC3 GPIO Configuration
+    PF10     ------> ADC3_IN8
+    */
+    HAL_GPIO_DeInit(GPIOF, GPIO_PIN_10);
+
+  /* USER CODE BEGIN ADC3_MspDeInit 1 */
+
+  /* USER CODE END ADC3_MspDeInit 1 */
+  }
+
+}
+
+static uint32_t HAL_RCC_CAN1_CLK_ENABLED=0;
+
+/**
+* @brief CAN MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hcan: CAN handle pointer
+* @retval None
+*/
+void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(hcan->Instance==CAN1)
+  {
+  /* USER CODE BEGIN CAN1_MspInit 0 */
+
+  /* USER CODE END CAN1_MspInit 0 */
+    /* Peripheral clock enable */
+    HAL_RCC_CAN1_CLK_ENABLED++;
+    if(HAL_RCC_CAN1_CLK_ENABLED==1){
+      __HAL_RCC_CAN1_CLK_ENABLE();
+    }
+
+    __HAL_RCC_GPIOD_CLK_ENABLE();
+    /**CAN1 GPIO Configuration
+    PD0     ------> CAN1_RX
+    PD1     ------> CAN1_TX
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF9_CAN1;
+    HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN CAN1_MspInit 1 */
+
+  /* USER CODE END CAN1_MspInit 1 */
+  }
+  else if(hcan->Instance==CAN2)
+  {
+  /* USER CODE BEGIN CAN2_MspInit 0 */
+
+  /* USER CODE END CAN2_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_CAN2_CLK_ENABLE();
+    HAL_RCC_CAN1_CLK_ENABLED++;
+    if(HAL_RCC_CAN1_CLK_ENABLED==1){
+      __HAL_RCC_CAN1_CLK_ENABLE();
+    }
+
+    __HAL_RCC_GPIOB_CLK_ENABLE();
+    /**CAN2 GPIO Configuration
+    PB5     ------> CAN2_RX
+    PB6     ------> CAN2_TX
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_6;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF9_CAN2;
+    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN CAN2_MspInit 1 */
+
+  /* USER CODE END CAN2_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief CAN MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hcan: CAN handle pointer
+* @retval None
+*/
+void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan)
+{
+  if(hcan->Instance==CAN1)
+  {
+  /* USER CODE BEGIN CAN1_MspDeInit 0 */
+
+  /* USER CODE END CAN1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    HAL_RCC_CAN1_CLK_ENABLED--;
+    if(HAL_RCC_CAN1_CLK_ENABLED==0){
+      __HAL_RCC_CAN1_CLK_DISABLE();
+    }
+
+    /**CAN1 GPIO Configuration
+    PD0     ------> CAN1_RX
+    PD1     ------> CAN1_TX
+    */
+    HAL_GPIO_DeInit(GPIOD, GPIO_PIN_0|GPIO_PIN_1);
+
+  /* USER CODE BEGIN CAN1_MspDeInit 1 */
+
+  /* USER CODE END CAN1_MspDeInit 1 */
+  }
+  else if(hcan->Instance==CAN2)
+  {
+  /* USER CODE BEGIN CAN2_MspDeInit 0 */
+
+  /* USER CODE END CAN2_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_CAN2_CLK_DISABLE();
+    HAL_RCC_CAN1_CLK_ENABLED--;
+    if(HAL_RCC_CAN1_CLK_ENABLED==0){
+      __HAL_RCC_CAN1_CLK_DISABLE();
+    }
+
+    /**CAN2 GPIO Configuration
+    PB5     ------> CAN2_RX
+    PB6     ------> CAN2_TX
+    */
+    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_5|GPIO_PIN_6);
+
+  /* USER CODE BEGIN CAN2_MspDeInit 1 */
+
+  /* USER CODE END CAN2_MspDeInit 1 */
+  }
+
+}
+
+/**
+* @brief SPI MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hspi: SPI handle pointer
+* @retval None
+*/
+void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(hspi->Instance==SPI2)
+  {
+  /* USER CODE BEGIN SPI2_MspInit 0 */
+
+  /* USER CODE END SPI2_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_SPI2_CLK_ENABLE();
+
+    __HAL_RCC_GPIOB_CLK_ENABLE();
+    /**SPI2 GPIO Configuration
+    PB13     ------> SPI2_SCK
+    PB14     ------> SPI2_MISO
+    PB15     ------> SPI2_MOSI
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
+    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN SPI2_MspInit 1 */
+
+  /* USER CODE END SPI2_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief SPI MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hspi: SPI handle pointer
+* @retval None
+*/
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
+{
+  if(hspi->Instance==SPI2)
+  {
+  /* USER CODE BEGIN SPI2_MspDeInit 0 */
+
+  /* USER CODE END SPI2_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_SPI2_CLK_DISABLE();
+
+    /**SPI2 GPIO Configuration
+    PB13     ------> SPI2_SCK
+    PB14     ------> SPI2_MISO
+    PB15     ------> SPI2_MOSI
+    */
+    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15);
+
+  /* USER CODE BEGIN SPI2_MspDeInit 1 */
+
+  /* USER CODE END SPI2_MspDeInit 1 */
+  }
+
+}
+
+/**
+* @brief TIM_Base MSP Initialization
+* This function configures the hardware resources used in this example
+* @param htim_base: TIM_Base handle pointer
+* @retval None
+*/
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
+{
+  if(htim_base->Instance==TIM1)
+  {
+  /* USER CODE BEGIN TIM1_MspInit 0 */
+
+  /* USER CODE END TIM1_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_TIM1_CLK_ENABLE();
+  /* USER CODE BEGIN TIM1_MspInit 1 */
+
+  /* USER CODE END TIM1_MspInit 1 */
+  }
+  else if(htim_base->Instance==TIM4)
+  {
+  /* USER CODE BEGIN TIM4_MspInit 0 */
+
+  /* USER CODE END TIM4_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_TIM4_CLK_ENABLE();
+  /* USER CODE BEGIN TIM4_MspInit 1 */
+
+  /* USER CODE END TIM4_MspInit 1 */
+  }
+  else if(htim_base->Instance==TIM8)
+  {
+  /* USER CODE BEGIN TIM8_MspInit 0 */
+
+  /* USER CODE END TIM8_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_TIM8_CLK_ENABLE();
+  /* USER CODE BEGIN TIM8_MspInit 1 */
+
+  /* USER CODE END TIM8_MspInit 1 */
+  }
+
+}
+
+void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
+{
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(htim->Instance==TIM1)
+  {
+  /* USER CODE BEGIN TIM1_MspPostInit 0 */
+
+  /* USER CODE END TIM1_MspPostInit 0 */
+    __HAL_RCC_GPIOE_CLK_ENABLE();
+    /**TIM1 GPIO Configuration
+    PE13     ------> TIM1_CH3
+    PE9     ------> TIM1_CH1
+    PE11     ------> TIM1_CH2
+    PE14     ------> TIM1_CH4
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_9|GPIO_PIN_11|GPIO_PIN_14;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF1_TIM1;
+    HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN TIM1_MspPostInit 1 */
+
+  /* USER CODE END TIM1_MspPostInit 1 */
+  }
+  else if(htim->Instance==TIM4)
+  {
+  /* USER CODE BEGIN TIM4_MspPostInit 0 */
+
+  /* USER CODE END TIM4_MspPostInit 0 */
+
+    __HAL_RCC_GPIOD_CLK_ENABLE();
+    /**TIM4 GPIO Configuration
+    PD14     ------> TIM4_CH3
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_14;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF2_TIM4;
+    HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN TIM4_MspPostInit 1 */
+
+  /* USER CODE END TIM4_MspPostInit 1 */
+  }
+  else if(htim->Instance==TIM8)
+  {
+  /* USER CODE BEGIN TIM8_MspPostInit 0 */
+
+  /* USER CODE END TIM8_MspPostInit 0 */
+
+    __HAL_RCC_GPIOI_CLK_ENABLE();
+    __HAL_RCC_GPIOC_CLK_ENABLE();
+    /**TIM8 GPIO Configuration
+    PI7     ------> TIM8_CH3
+    PI6     ------> TIM8_CH2
+    PC6     ------> TIM8_CH1
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_7|GPIO_PIN_6;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF3_TIM8;
+    HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
+
+    GPIO_InitStruct.Pin = GPIO_PIN_6;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+    GPIO_InitStruct.Alternate = GPIO_AF3_TIM8;
+    HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN TIM8_MspPostInit 1 */
+
+  /* USER CODE END TIM8_MspPostInit 1 */
+  }
+
+}
+/**
+* @brief TIM_Base MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param htim_base: TIM_Base handle pointer
+* @retval None
+*/
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
+{
+  if(htim_base->Instance==TIM1)
+  {
+  /* USER CODE BEGIN TIM1_MspDeInit 0 */
+
+  /* USER CODE END TIM1_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM1_CLK_DISABLE();
+  /* USER CODE BEGIN TIM1_MspDeInit 1 */
+
+  /* USER CODE END TIM1_MspDeInit 1 */
+  }
+  else if(htim_base->Instance==TIM4)
+  {
+  /* USER CODE BEGIN TIM4_MspDeInit 0 */
+
+  /* USER CODE END TIM4_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM4_CLK_DISABLE();
+  /* USER CODE BEGIN TIM4_MspDeInit 1 */
+
+  /* USER CODE END TIM4_MspDeInit 1 */
+  }
+  else if(htim_base->Instance==TIM8)
+  {
+  /* USER CODE BEGIN TIM8_MspDeInit 0 */
+
+  /* USER CODE END TIM8_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_TIM8_CLK_DISABLE();
+  /* USER CODE BEGIN TIM8_MspDeInit 1 */
+
+  /* USER CODE END TIM8_MspDeInit 1 */
+  }
+
+}
+
 /**
 * @brief UART MSP Initialization
 * This function configures the hardware resources used in this example
@@ -118,6 +539,54 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
 
   /* USER CODE END USART1_MspInit 1 */
   }
+  else if(huart->Instance==USART3)
+  {
+  /* USER CODE BEGIN USART3_MspInit 0 */
+
+  /* USER CODE END USART3_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_USART3_CLK_ENABLE();
+
+    __HAL_RCC_GPIOC_CLK_ENABLE();
+    /**USART3 GPIO Configuration
+    PC11     ------> USART3_RX
+    PC10     ------> USART3_TX
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_10;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
+    HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN USART3_MspInit 1 */
+
+  /* USER CODE END USART3_MspInit 1 */
+  }
+  else if(huart->Instance==USART6)
+  {
+  /* USER CODE BEGIN USART6_MspInit 0 */
+
+  /* USER CODE END USART6_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_USART6_CLK_ENABLE();
+
+    __HAL_RCC_GPIOG_CLK_ENABLE();
+    /**USART6 GPIO Configuration
+    PG14     ------> USART6_TX
+    PG9     ------> USART6_RX
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_14|GPIO_PIN_9;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF8_USART6;
+    HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN USART6_MspInit 1 */
+
+  /* USER CODE END USART6_MspInit 1 */
+  }
 
 }
 
@@ -149,11 +618,45 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
 
   /* USER CODE END USART1_MspDeInit 1 */
   }
+  else if(huart->Instance==USART3)
+  {
+  /* USER CODE BEGIN USART3_MspDeInit 0 */
+
+  /* USER CODE END USART3_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_USART3_CLK_DISABLE();
+
+    /**USART3 GPIO Configuration
+    PC11     ------> USART3_RX
+    PC10     ------> USART3_TX
+    */
+    HAL_GPIO_DeInit(GPIOC, GPIO_PIN_11|GPIO_PIN_10);
+
+  /* USER CODE BEGIN USART3_MspDeInit 1 */
+
+  /* USER CODE END USART3_MspDeInit 1 */
+  }
+  else if(huart->Instance==USART6)
+  {
+  /* USER CODE BEGIN USART6_MspDeInit 0 */
+
+  /* USER CODE END USART6_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_USART6_CLK_DISABLE();
+
+    /**USART6 GPIO Configuration
+    PG14     ------> USART6_TX
+    PG9     ------> USART6_RX
+    */
+    HAL_GPIO_DeInit(GPIOG, GPIO_PIN_14|GPIO_PIN_9);
+
+  /* USER CODE BEGIN USART6_MspDeInit 1 */
+
+  /* USER CODE END USART6_MspDeInit 1 */
+  }
 
 }
 
 /* USER CODE BEGIN 1 */
 
 /* USER CODE END 1 */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Src/stm32f4xx_it.c

@@ -202,4 +202,3 @@ void SysTick_Handler(void)
 /* USER CODE BEGIN 1 */
 
 /* USER CODE END 1 */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

bsp/stm32/stm32f407-robomaster-c/board/CubeMX_Config/Src/system_stm32f4xx.c

@@ -0,0 +1,747 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f4xx.c
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
+  *
+  *   This file provides two functions and one global variable to be called from 
+  *   user application:
+  *      - SystemInit(): This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f4xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick 
+  *                                  timer or configure other parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f4xx_system
+  * @{
+  */  
+  
+/** @addtogroup STM32F4xx_System_Private_Includes
+  * @{
+  */
+
+
+#include "stm32f4xx.h"
+
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE    ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Defines
+  * @{
+  */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory  */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
+ || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
+/* #define DATA_IN_ExtSRAM */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx ||\
+          STM32F412Zx || STM32F412Vx */
+ 
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+/* #define DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\
+          STM32F479xx */
+
+/* Note: Following vector table addresses must be defined in line with linker
+         configuration. */
+/*!< Uncomment the following line if you need to relocate the vector table
+     anywhere in Flash or Sram, else the vector table is kept at the automatic
+     remap of boot address selected */
+/* #define USER_VECT_TAB_ADDRESS */
+
+#if defined(USER_VECT_TAB_ADDRESS)
+/*!< Uncomment the following line if you need to relocate your vector Table
+     in Sram else user remap will be done in Flash. */
+/* #define VECT_TAB_SRAM */
+#if defined(VECT_TAB_SRAM)
+#define VECT_TAB_BASE_ADDRESS   SRAM_BASE       /*!< Vector Table base address field.
+                                                     This value must be a multiple of 0x200. */
+#define VECT_TAB_OFFSET         0x00000000U     /*!< Vector Table base offset field.
+                                                     This value must be a multiple of 0x200. */
+#else
+#define VECT_TAB_BASE_ADDRESS   FLASH_BASE      /*!< Vector Table base address field.
+                                                     This value must be a multiple of 0x200. */
+#define VECT_TAB_OFFSET         0x00000000U     /*!< Vector Table base offset field.
+                                                     This value must be a multiple of 0x200. */
+#endif /* VECT_TAB_SRAM */
+#endif /* USER_VECT_TAB_ADDRESS */
+/******************************************************************************/
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Variables
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency 
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+uint32_t SystemCoreClock = 16000000;
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8]  = {0, 0, 0, 0, 1, 2, 3, 4};
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the FPU setting, vector table location and External memory 
+  *         configuration.
+  * @param  None
+  * @retval None
+  */
+void SystemInit(void)
+{
+  /* FPU settings ------------------------------------------------------------*/
+  #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+    SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2));  /* set CP10 and CP11 Full Access */
+  #endif
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+  SystemInit_ExtMemCtl(); 
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+  /* Configure the Vector Table location -------------------------------------*/
+#if defined(USER_VECT_TAB_ADDRESS)
+  SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#endif /* USER_VECT_TAB_ADDRESS */
+}
+
+/**
+   * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *           
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.         
+  *     
+  * @note   - The system frequency computed by this function is not the real 
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *             
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *                                              
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *                          
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
+  *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
+  *         
+  *         (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+  *             16 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.   
+  *    
+  *         (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
+  *              depends on the application requirements), user has to ensure that HSE_VALUE
+  *              is same as the real frequency of the crystal used. Otherwise, this function
+  *              may have wrong result.
+  *                
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  *     
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate(void)
+{
+  uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
+  
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+  switch (tmp)
+  {
+    case 0x00:  /* HSI used as system clock source */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04:  /* HSE used as system clock source */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08:  /* PLL used as system clock source */
+
+      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
+         SYSCLK = PLL_VCO / PLL_P
+         */    
+      pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
+      pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+      
+      if (pllsource != 0)
+      {
+        /* HSE used as PLL clock source */
+        pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+      }
+      else
+      {
+        /* HSI used as PLL clock source */
+        pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+      }
+
+      pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
+      SystemCoreClock = pllvco/pllp;
+      break;
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  /* Compute HCLK frequency --------------------------------------------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+  /* HCLK frequency */
+  SystemCoreClock >>= tmp;
+}
+
+#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM)
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx)
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in startup_stm32f4xx.s before jump to main.
+  *         This function configures the external memories (SRAM/SDRAM)
+  *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+  __IO uint32_t tmp = 0x00;
+
+  register uint32_t tmpreg = 0, timeout = 0xFFFF;
+  register __IO uint32_t index;
+
+  /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */
+  RCC->AHB1ENR |= 0x000001F8;
+
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+  
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x00CCC0CC;
+  GPIOD->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xAAAA0A8A;
+  /* Configure PDx pins speed to 100 MHz */  
+  GPIOD->OSPEEDR = 0xFFFF0FCF;
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00CC0CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA828A;
+  /* Configure PEx pins speed to 100 MHz */ 
+  GPIOE->OSPEEDR = 0xFFFFC3CF;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x00000000;
+  
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0xCCCCCCCC;
+  GPIOF->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA800AAA;
+  /* Configure PFx pins speed to 50 MHz */ 
+  GPIOF->OSPEEDR = 0xAA800AAA;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0xCCCCCCCC;
+  GPIOG->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0xAAAAAAAA;
+  /* Configure PGx pins speed to 50 MHz */ 
+  GPIOG->OSPEEDR = 0xAAAAAAAA;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x00000000;
+  
+  /* Connect PHx pins to FMC Alternate function */
+  GPIOH->AFR[0]  = 0x00C0CC00;
+  GPIOH->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PHx pins in Alternate function mode */ 
+  GPIOH->MODER   = 0xAAAA08A0;
+  /* Configure PHx pins speed to 50 MHz */ 
+  GPIOH->OSPEEDR = 0xAAAA08A0;
+  /* Configure PHx pins Output type to push-pull */  
+  GPIOH->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PHx pins */ 
+  GPIOH->PUPDR   = 0x00000000;
+  
+  /* Connect PIx pins to FMC Alternate function */
+  GPIOI->AFR[0]  = 0xCCCCCCCC;
+  GPIOI->AFR[1]  = 0x00000CC0;
+  /* Configure PIx pins in Alternate function mode */ 
+  GPIOI->MODER   = 0x0028AAAA;
+  /* Configure PIx pins speed to 50 MHz */ 
+  GPIOI->OSPEEDR = 0x0028AAAA;
+  /* Configure PIx pins Output type to push-pull */  
+  GPIOI->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PIx pins */ 
+  GPIOI->PUPDR   = 0x00000000;
+  
+/*-- FMC Configuration -------------------------------------------------------*/
+  /* Enable the FMC interface clock */
+  RCC->AHB3ENR |= 0x00000001;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+  FMC_Bank5_6->SDCR[0] = 0x000019E4;
+  FMC_Bank5_6->SDTR[0] = 0x01115351;      
+  
+  /* SDRAM initialization sequence */
+  /* Clock enable command */
+  FMC_Bank5_6->SDCMR = 0x00000011; 
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+
+  /* Delay */
+  for (index = 0; index<1000; index++);
+  
+  /* PALL command */
+  FMC_Bank5_6->SDCMR = 0x00000012;           
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+  
+  /* Auto refresh command */
+  FMC_Bank5_6->SDCMR = 0x00000073;
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+ 
+  /* MRD register program */
+  FMC_Bank5_6->SDCMR = 0x00046014;
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  } 
+  
+  /* Set refresh count */
+  tmpreg = FMC_Bank5_6->SDRTR;
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
+  
+  /* Disable write protection */
+  tmpreg = FMC_Bank5_6->SDCR[0]; 
+  FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001011;
+  FMC_Bank1->BTCR[3]  = 0x00000201;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ 
+#if defined(STM32F469xx) || defined(STM32F479xx)
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001091;
+  FMC_Bank1->BTCR[3]  = 0x00110212;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F469xx || STM32F479xx */
+
+  (void)(tmp); 
+}
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in startup_stm32f4xx.s before jump to main.
+  *         This function configures the external memories (SRAM/SDRAM)
+  *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+  __IO uint32_t tmp = 0x00;
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx)
+#if defined (DATA_IN_ExtSDRAM)
+  register uint32_t tmpreg = 0, timeout = 0xFFFF;
+  register __IO uint32_t index;
+
+#if defined(STM32F446xx)
+  /* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
+      clock */
+  RCC->AHB1ENR |= 0x0000007D;
+#else
+  /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface 
+      clock */
+  RCC->AHB1ENR |= 0x000001F8;
+#endif /* STM32F446xx */  
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+  
+#if defined(STM32F446xx)
+  /* Connect PAx pins to FMC Alternate function */
+  GPIOA->AFR[0]  |= 0xC0000000;
+  GPIOA->AFR[1]  |= 0x00000000;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOA->MODER   |= 0x00008000;
+  /* Configure PDx pins speed to 50 MHz */
+  GPIOA->OSPEEDR |= 0x00008000;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOA->OTYPER  |= 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOA->PUPDR   |= 0x00000000;
+
+  /* Connect PCx pins to FMC Alternate function */
+  GPIOC->AFR[0]  |= 0x00CC0000;
+  GPIOC->AFR[1]  |= 0x00000000;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOC->MODER   |= 0x00000A00;
+  /* Configure PDx pins speed to 50 MHz */
+  GPIOC->OSPEEDR |= 0x00000A00;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOC->OTYPER  |= 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOC->PUPDR   |= 0x00000000;
+#endif /* STM32F446xx */
+
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x000000CC;
+  GPIOD->AFR[1]  = 0xCC000CCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xA02A000A;
+  /* Configure PDx pins speed to 50 MHz */  
+  GPIOD->OSPEEDR = 0xA02A000A;
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00000CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA800A;
+  /* Configure PEx pins speed to 50 MHz */ 
+  GPIOE->OSPEEDR = 0xAAAA800A;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x00000000;
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0xCCCCCCCC;
+  GPIOF->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA800AAA;
+  /* Configure PFx pins speed to 50 MHz */ 
+  GPIOF->OSPEEDR = 0xAA800AAA;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0xCCCCCCCC;
+  GPIOG->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0xAAAAAAAA;
+  /* Configure PGx pins speed to 50 MHz */ 
+  GPIOG->OSPEEDR = 0xAAAAAAAA;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x00000000;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx)  
+  /* Connect PHx pins to FMC Alternate function */
+  GPIOH->AFR[0]  = 0x00C0CC00;
+  GPIOH->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PHx pins in Alternate function mode */ 
+  GPIOH->MODER   = 0xAAAA08A0;
+  /* Configure PHx pins speed to 50 MHz */ 
+  GPIOH->OSPEEDR = 0xAAAA08A0;
+  /* Configure PHx pins Output type to push-pull */  
+  GPIOH->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PHx pins */ 
+  GPIOH->PUPDR   = 0x00000000;
+  
+  /* Connect PIx pins to FMC Alternate function */
+  GPIOI->AFR[0]  = 0xCCCCCCCC;
+  GPIOI->AFR[1]  = 0x00000CC0;
+  /* Configure PIx pins in Alternate function mode */ 
+  GPIOI->MODER   = 0x0028AAAA;
+  /* Configure PIx pins speed to 50 MHz */ 
+  GPIOI->OSPEEDR = 0x0028AAAA;
+  /* Configure PIx pins Output type to push-pull */  
+  GPIOI->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PIx pins */ 
+  GPIOI->PUPDR   = 0x00000000;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+  
+/*-- FMC Configuration -------------------------------------------------------*/
+  /* Enable the FMC interface clock */
+  RCC->AHB3ENR |= 0x00000001;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+  /* Configure and enable SDRAM bank1 */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCR[0] = 0x00001954;
+#else  
+  FMC_Bank5_6->SDCR[0] = 0x000019E4;
+#endif /* STM32F446xx */
+  FMC_Bank5_6->SDTR[0] = 0x01115351;      
+  
+  /* SDRAM initialization sequence */
+  /* Clock enable command */
+  FMC_Bank5_6->SDCMR = 0x00000011; 
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+
+  /* Delay */
+  for (index = 0; index<1000; index++);
+  
+  /* PALL command */
+  FMC_Bank5_6->SDCMR = 0x00000012;           
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+  
+  /* Auto refresh command */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCMR = 0x000000F3;
+#else  
+  FMC_Bank5_6->SDCMR = 0x00000073;
+#endif /* STM32F446xx */
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+ 
+  /* MRD register program */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCMR = 0x00044014;
+#else  
+  FMC_Bank5_6->SDCMR = 0x00046014;
+#endif /* STM32F446xx */
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  } 
+  
+  /* Set refresh count */
+  tmpreg = FMC_Bank5_6->SDRTR;
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
+#else    
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
+#endif /* STM32F446xx */
+  
+  /* Disable write protection */
+  tmpreg = FMC_Bank5_6->SDCR[0]; 
+  FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+#endif /* DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\
+ || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\
+ || defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx)
+
+#if defined(DATA_IN_ExtSRAM)
+/*-- GPIOs Configuration -----------------------------------------------------*/
+   /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
+  RCC->AHB1ENR   |= 0x00000078;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
+  
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x00CCC0CC;
+  GPIOD->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xAAAA0A8A;
+  /* Configure PDx pins speed to 100 MHz */  
+  GPIOD->OSPEEDR = 0xFFFF0FCF;
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00CC0CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA828A;
+  /* Configure PEx pins speed to 100 MHz */ 
+  GPIOE->OSPEEDR = 0xFFFFC3CF;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x00000000;
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0x00CCCCCC;
+  GPIOF->AFR[1]  = 0xCCCC0000;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA000AAA;
+  /* Configure PFx pins speed to 100 MHz */ 
+  GPIOF->OSPEEDR = 0xFF000FFF;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0x00CCCCCC;
+  GPIOG->AFR[1]  = 0x000000C0;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0x00085AAA;
+  /* Configure PGx pins speed to 100 MHz */ 
+  GPIOG->OSPEEDR = 0x000CAFFF;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x00000000;
+  
+/*-- FMC/FSMC Configuration --------------------------------------------------*/
+  /* Enable the FMC/FSMC interface clock */
+  RCC->AHB3ENR         |= 0x00000001;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001011;
+  FMC_Bank1->BTCR[3]  = 0x00000201;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ 
+#if defined(STM32F469xx) || defined(STM32F479xx)
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001091;
+  FMC_Bank1->BTCR[3]  = 0x00110212;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F469xx || STM32F479xx */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)\
+   || defined(STM32F412Zx) || defined(STM32F412Vx)
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
+  /* Configure and enable Bank1_SRAM2 */
+  FSMC_Bank1->BTCR[2]  = 0x00001011;
+  FSMC_Bank1->BTCR[3]  = 0x00000201;
+  FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F412Zx || STM32F412Vx */
+
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+          STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Vx  */ 
+  (void)(tmp); 
+}
+#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */

bsp/stm32/stm32f407-robomaster-c/board/Kconfig

@@ -24,15 +24,142 @@ menu "On-chip Peripheral Drivers"
         select RT_USING_SERIAL
         if BSP_USING_UART
             config BSP_USING_UART1
-                bool "Enable UART1"
+                bool "Enable UART1 (FinSH , symbol UART2 on board)"
                 default y
 
             config BSP_UART1_RX_USING_DMA
                 bool "Enable UART1 RX DMA"
                 depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
                 default n
+
+            config BSP_USING_UART3
+                bool "Enable UART3 (DBUS)"
+                default n
+            config BSP_UART3_RX_USING_DMA
+                bool "Enable UART3 RX DMA"
+                depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
+                default n
+
+            config BSP_USING_UART6
+                bool "Enable UART6"
+                default n
+            config BSP_UART6_RX_USING_DMA
+                bool "Enable UART6 RX DMA"
+                depends on BSP_USING_UART6 && RT_SERIAL_USING_DMA
+                default n
+
+        endif
+
+    menuconfig BSP_USING_CAN
+        bool "Enable CAN"
+        default n
+        select RT_USING_CAN
+        if BSP_USING_CAN
+            config BSP_USING_CAN1
+                bool "using CAN1 (2pin)"
+                default n
+            config BSP_USING_CAN2
+                bool "using CAN2 (4pin)"
+                default n
+        endif
+
+    menuconfig BSP_USING_PWM
+        bool "Enable PWM"
+        default n
+        select RT_USING_PWM
+        if BSP_USING_PWM
+            
+            menuconfig BSP_USING_PWM1
+                bool "Enable timer1 output PWM"
+                default n
+                if BSP_USING_PWM1
+                    config BSP_USING_PWM1_CH1
+                        bool "Enable PWM1 channel1"
+                        default n
+                    config BSP_USING_PWM1_CH2
+                        bool "Enable PWM1 channel2"
+                        default n
+                    config BSP_USING_PWM1_CH3
+                        bool "Enable PWM1 channel3"
+                        default n
+                    config BSP_USING_PWM1_CH4
+                        bool "Enable PWM1 channel4"
+                        default n
+                endif
+
+            menuconfig BSP_USING_PWM4
+                bool "Enable timer4 output PWM"
+                default n
+                if BSP_USING_PWM4
+                    config BSP_USING_PWM4_CH3
+                        bool "Enable PWM4 channel3 (buzzer)"
+                        default n
+                endif
+
+            menuconfig BSP_USING_PWM8
+                bool "Enable timer8 output PWM"
+                default n
+                if BSP_USING_PWM8
+                    config BSP_USING_PWM8_CH1
+                        bool "Enable PWM8 channel1"
+                        default n
+                    config BSP_USING_PWM8_CH2
+                        bool "Enable PWM8 channel2"
+                        default n
+                    config BSP_USING_PWM8_CH3
+                        bool "Enable PWM8 channel3"
+                        default n
+                endif
+
         endif
         
+    menuconfig BSP_USING_ADC
+        bool "Enable ADC"
+        default n
+        select RT_USING_ADC
+        if BSP_USING_ADC
+            config BSP_USING_ADC3
+                bool "Enable ADC3"
+                default n
+        endif
+
+    menuconfig BSP_USING_SPI
+        bool "Enable SPI BUS"
+        default n
+        select RT_USING_SPI
+        if BSP_USING_SPI
+            config BSP_USING_SPI2
+                bool "Enable SPI2 BUS"
+                default n  
+                        
+            config BSP_SPI2_TX_USING_DMA
+                bool "Enable SPI2 TX DMA"
+                depends on BSP_USING_SPI2
+                default n
+                        
+            config BSP_SPI2_RX_USING_DMA
+                bool "Enable SPI2 RX DMA"
+                depends on BSP_USING_SPI2
+                select BSP_SPI2_TX_USING_DMA
+                default n
+        endif
+
+    menuconfig BSP_USING_I2C1
+        bool "Enable I2C1 BUS (software simulation)"
+        default n
+        select RT_USING_I2C
+        select RT_USING_I2C_BITOPS
+        select RT_USING_PIN
+        if BSP_USING_I2C1
+            config BSP_I2C1_SCL_PIN
+                int "i2c1 scl pin number"
+                default 81
+            config BSP_I2C1_SDA_PIN
+                int "I2C1 sda pin number"
+                default 80
+        endif
+
+        
     source "../libraries/HAL_Drivers/Kconfig"    
     
 endmenu

bsp/stm32/stm32f407-robomaster-c/project.uvoptx

@@ -178,7 +178,6 @@
       <pMultCmdsp></pMultCmdsp>
       <DebugDescription>
         <Enable>1</Enable>
-        <EnableFlashSeq>0</EnableFlashSeq>
         <EnableLog>0</EnableLog>
         <Protocol>2</Protocol>
         <DbgClock>10000000</DbgClock>
@@ -187,11 +186,823 @@
   </Target>
 
   <Group>
-    <GroupName>Source Group 1</GroupName>
+    <GroupName>Applications</GroupName>
     <tvExp>0</tvExp>
     <tvExpOptDlg>0</tvExpOptDlg>
     <cbSel>0</cbSel>
     <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>1</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>applications\main.c</PathWithFileName>
+      <FilenameWithoutPath>main.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>Compiler</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>2</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\libc\compilers\armlibc\syscall_mem.c</PathWithFileName>
+      <FilenameWithoutPath>syscall_mem.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>3</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\libc\compilers\armlibc\syscalls.c</PathWithFileName>
+      <FilenameWithoutPath>syscalls.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>4</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\libc\compilers\common\cctype.c</PathWithFileName>
+      <FilenameWithoutPath>cctype.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>5</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\libc\compilers\common\cstdio.c</PathWithFileName>
+      <FilenameWithoutPath>cstdio.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>6</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\libc\compilers\common\cstdlib.c</PathWithFileName>
+      <FilenameWithoutPath>cstdlib.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>7</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\libc\compilers\common\cstring.c</PathWithFileName>
+      <FilenameWithoutPath>cstring.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>8</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\libc\compilers\common\ctime.c</PathWithFileName>
+      <FilenameWithoutPath>ctime.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>2</GroupNumber>
+      <FileNumber>9</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\libc\compilers\common\cwchar.c</PathWithFileName>
+      <FilenameWithoutPath>cwchar.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>CPU</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>10</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\libcpu\arm\common\backtrace.c</PathWithFileName>
+      <FilenameWithoutPath>backtrace.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>11</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\libcpu\arm\common\div0.c</PathWithFileName>
+      <FilenameWithoutPath>div0.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>12</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\libcpu\arm\common\showmem.c</PathWithFileName>
+      <FilenameWithoutPath>showmem.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>13</FileNumber>
+      <FileType>2</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\libcpu\arm\cortex-m4\context_rvds.S</PathWithFileName>
+      <FilenameWithoutPath>context_rvds.S</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>3</GroupNumber>
+      <FileNumber>14</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\libcpu\arm\cortex-m4\cpuport.c</PathWithFileName>
+      <FilenameWithoutPath>cpuport.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>DeviceDrivers</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>4</GroupNumber>
+      <FileNumber>15</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\drivers\ipc\completion.c</PathWithFileName>
+      <FilenameWithoutPath>completion.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>4</GroupNumber>
+      <FileNumber>16</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\drivers\ipc\dataqueue.c</PathWithFileName>
+      <FilenameWithoutPath>dataqueue.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>4</GroupNumber>
+      <FileNumber>17</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\drivers\ipc\pipe.c</PathWithFileName>
+      <FilenameWithoutPath>pipe.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>4</GroupNumber>
+      <FileNumber>18</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\drivers\ipc\ringblk_buf.c</PathWithFileName>
+      <FilenameWithoutPath>ringblk_buf.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>4</GroupNumber>
+      <FileNumber>19</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\drivers\ipc\ringbuffer.c</PathWithFileName>
+      <FilenameWithoutPath>ringbuffer.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>4</GroupNumber>
+      <FileNumber>20</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\drivers\ipc\waitqueue.c</PathWithFileName>
+      <FilenameWithoutPath>waitqueue.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>4</GroupNumber>
+      <FileNumber>21</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\drivers\ipc\workqueue.c</PathWithFileName>
+      <FilenameWithoutPath>workqueue.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>4</GroupNumber>
+      <FileNumber>22</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\drivers\misc\pin.c</PathWithFileName>
+      <FilenameWithoutPath>pin.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>4</GroupNumber>
+      <FileNumber>23</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\drivers\serial\serial.c</PathWithFileName>
+      <FilenameWithoutPath>serial.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>Drivers</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>5</GroupNumber>
+      <FileNumber>24</FileNumber>
+      <FileType>2</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\arm\startup_stm32f407xx.s</PathWithFileName>
+      <FilenameWithoutPath>startup_stm32f407xx.s</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>5</GroupNumber>
+      <FileNumber>25</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>board\CubeMX_Config\Src\stm32f4xx_hal_msp.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_msp.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>5</GroupNumber>
+      <FileNumber>26</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>board\board.c</PathWithFileName>
+      <FilenameWithoutPath>board.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>5</GroupNumber>
+      <FileNumber>27</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\HAL_Drivers\drv_common.c</PathWithFileName>
+      <FilenameWithoutPath>drv_common.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>5</GroupNumber>
+      <FileNumber>28</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\HAL_Drivers\drv_gpio.c</PathWithFileName>
+      <FilenameWithoutPath>drv_gpio.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>5</GroupNumber>
+      <FileNumber>29</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\HAL_Drivers\drv_usart.c</PathWithFileName>
+      <FilenameWithoutPath>drv_usart.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>Finsh</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>30</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\finsh\shell.c</PathWithFileName>
+      <FilenameWithoutPath>shell.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>31</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\finsh\msh.c</PathWithFileName>
+      <FilenameWithoutPath>msh.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>32</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\finsh\msh_parse.c</PathWithFileName>
+      <FilenameWithoutPath>msh_parse.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>6</GroupNumber>
+      <FileNumber>33</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\components\finsh\cmd.c</PathWithFileName>
+      <FilenameWithoutPath>cmd.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>Kernel</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>7</GroupNumber>
+      <FileNumber>34</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\clock.c</PathWithFileName>
+      <FilenameWithoutPath>clock.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>7</GroupNumber>
+      <FileNumber>35</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\components.c</PathWithFileName>
+      <FilenameWithoutPath>components.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>7</GroupNumber>
+      <FileNumber>36</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\device.c</PathWithFileName>
+      <FilenameWithoutPath>device.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>7</GroupNumber>
+      <FileNumber>37</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\idle.c</PathWithFileName>
+      <FilenameWithoutPath>idle.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>7</GroupNumber>
+      <FileNumber>38</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\ipc.c</PathWithFileName>
+      <FilenameWithoutPath>ipc.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>7</GroupNumber>
+      <FileNumber>39</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\irq.c</PathWithFileName>
+      <FilenameWithoutPath>irq.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>7</GroupNumber>
+      <FileNumber>40</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\kservice.c</PathWithFileName>
+      <FilenameWithoutPath>kservice.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>7</GroupNumber>
+      <FileNumber>41</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\mem.c</PathWithFileName>
+      <FilenameWithoutPath>mem.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>7</GroupNumber>
+      <FileNumber>42</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\mempool.c</PathWithFileName>
+      <FilenameWithoutPath>mempool.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>7</GroupNumber>
+      <FileNumber>43</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\object.c</PathWithFileName>
+      <FilenameWithoutPath>object.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>7</GroupNumber>
+      <FileNumber>44</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\scheduler.c</PathWithFileName>
+      <FilenameWithoutPath>scheduler.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>7</GroupNumber>
+      <FileNumber>45</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\thread.c</PathWithFileName>
+      <FilenameWithoutPath>thread.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>7</GroupNumber>
+      <FileNumber>46</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\..\..\src\timer.c</PathWithFileName>
+      <FilenameWithoutPath>timer.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>Libraries</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>47</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_uart.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>48</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp_ex.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_cryp_ex.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>49</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_pwr_ex.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>50</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_rng.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>51</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_dma.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>52</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>53</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_rcc_ex.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>54</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_usart.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_usart.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>55</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cec.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_cec.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>56</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_rcc.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>57</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_dma_ex.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>58</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_pwr.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>59</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c</PathWithFileName>
+      <FilenameWithoutPath>system_stm32f4xx.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>60</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_crc.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_crc.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>61</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_cortex.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>62</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_cryp.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>8</GroupNumber>
+      <FileNumber>63</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c</PathWithFileName>
+      <FilenameWithoutPath>stm32f4xx_hal_gpio.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
   </Group>
 
 </ProjectOpt>

bsp/stm32/stm32f407-robomaster-c/project.uvproj

@@ -357,9 +357,9 @@
             <useXO>0</useXO>
             <VariousControls>
               <MiscControls />
-              <Define>USE_HAL_DRIVER, STM32F407xx, __RTTHREAD__, RT_USING_ARM_LIBC, __CLK_TCK=RT_TICK_PER_SECOND</Define>
+              <Define>RT_USING_LIBC, USE_HAL_DRIVER, STM32F407xx, __CLK_TCK=RT_TICK_PER_SECOND, __STDC_LIMIT_MACROS, __RTTHREAD__, RT_USING_ARM_LIBC</Define>
               <Undefine />
-              <IncludePath>applications;.;..\..\..\components\libc\compilers\common;..\..\..\components\libc\compilers\common\extension;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\components\finsh;.;..\..\..\include;..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc;..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include;..\libraries\STM32F4xx_HAL\CMSIS\Include;..\..\..\components\libc\posix\io\poll;..\..\..\components\libc\posix\io\stdio;..\..\..\components\libc\posix\ipc</IncludePath>
+              <IncludePath>applications;.;..\..\..\components\libc\compilers\common\include;..\..\..\components\libc\compilers\common\extension;..\..\..\components\libc\compilers\common\extension\fcntl\octal;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\libraries\HAL_Drivers\CMSIS\Include;..\..\..\components\dfs\include;..\..\..\components\finsh;.;..\..\..\include;..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc;..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include;..\..\..\components\libc\posix\io\poll;..\..\..\components\libc\posix\io\stdio;..\..\..\components\libc\posix\ipc</IncludePath>
             </VariousControls>
           </Cads>
           <Aads>
@@ -427,16 +427,44 @@
           </Files>
           <Files>
             <File>
-              <FileName>time.c</FileName>
+              <FileName>cctype.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\components\libc\compilers\common\time.c</FilePath>
+              <FilePath>..\..\..\components\libc\compilers\common\cctype.c</FilePath>
             </File>
           </Files>
           <Files>
             <File>
-              <FileName>stdlib.c</FileName>
+              <FileName>cstdio.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\components\libc\compilers\common\stdlib.c</FilePath>
+              <FilePath>..\..\..\components\libc\compilers\common\cstdio.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>cstdlib.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\libc\compilers\common\cstdlib.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>cstring.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\libc\compilers\common\cstring.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>ctime.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\libc\compilers\common\ctime.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>cwchar.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\libc\compilers\common\cwchar.c</FilePath>
             </File>
           </Files>
         </Group>
@@ -444,23 +472,23 @@
           <GroupName>CPU</GroupName>
           <Files>
             <File>
-              <FileName>div0.c</FileName>
+              <FileName>backtrace.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\libcpu\arm\common\div0.c</FilePath>
+              <FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath>
             </File>
           </Files>
           <Files>
             <File>
-              <FileName>showmem.c</FileName>
+              <FileName>div0.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath>
+              <FilePath>..\..\..\libcpu\arm\common\div0.c</FilePath>
             </File>
           </Files>
           <Files>
             <File>
-              <FileName>backtrace.c</FileName>
+              <FileName>showmem.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath>
+              <FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath>
             </File>
           </Files>
           <Files>
@@ -482,9 +510,9 @@
           <GroupName>DeviceDrivers</GroupName>
           <Files>
             <File>
-              <FileName>waitqueue.c</FileName>
+              <FileName>completion.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\components\drivers\ipc\waitqueue.c</FilePath>
+              <FilePath>..\..\..\components\drivers\ipc\completion.c</FilePath>
             </File>
           </Files>
           <Files>
@@ -496,37 +524,37 @@
           </Files>
           <Files>
             <File>
-              <FileName>ringblk_buf.c</FileName>
+              <FileName>pipe.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\components\drivers\ipc\ringblk_buf.c</FilePath>
+              <FilePath>..\..\..\components\drivers\ipc\pipe.c</FilePath>
             </File>
           </Files>
           <Files>
             <File>
-              <FileName>completion.c</FileName>
+              <FileName>ringblk_buf.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\components\drivers\ipc\completion.c</FilePath>
+              <FilePath>..\..\..\components\drivers\ipc\ringblk_buf.c</FilePath>
             </File>
           </Files>
           <Files>
             <File>
-              <FileName>pipe.c</FileName>
+              <FileName>ringbuffer.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\components\drivers\ipc\pipe.c</FilePath>
+              <FilePath>..\..\..\components\drivers\ipc\ringbuffer.c</FilePath>
             </File>
           </Files>
           <Files>
             <File>
-              <FileName>workqueue.c</FileName>
+              <FileName>waitqueue.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\components\drivers\ipc\workqueue.c</FilePath>
+              <FilePath>..\..\..\components\drivers\ipc\waitqueue.c</FilePath>
             </File>
           </Files>
           <Files>
             <File>
-              <FileName>ringbuffer.c</FileName>
+              <FileName>workqueue.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\components\drivers\ipc\ringbuffer.c</FilePath>
+              <FilePath>..\..\..\components\drivers\ipc\workqueue.c</FilePath>
             </File>
           </Files>
           <Files>
@@ -546,6 +574,13 @@
         </Group>
         <Group>
           <GroupName>Drivers</GroupName>
+          <Files>
+            <File>
+              <FileName>startup_stm32f407xx.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\arm\startup_stm32f407xx.s</FilePath>
+            </File>
+          </Files>
           <Files>
             <File>
               <FileName>stm32f4xx_hal_msp.c</FileName>
@@ -555,16 +590,16 @@
           </Files>
           <Files>
             <File>
-              <FileName>startup_stm32f407xx.s</FileName>
-              <FileType>2</FileType>
-              <FilePath>..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\arm\startup_stm32f407xx.s</FilePath>
+              <FileName>board.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>board\board.c</FilePath>
             </File>
           </Files>
           <Files>
             <File>
-              <FileName>board.c</FileName>
+              <FileName>drv_common.c</FileName>
               <FileType>1</FileType>
-              <FilePath>board\board.c</FilePath>
+              <FilePath>..\libraries\HAL_Drivers\drv_common.c</FilePath>
             </File>
           </Files>
           <Files>
@@ -581,11 +616,35 @@
               <FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
             </File>
           </Files>
+        </Group>
+        <Group>
+          <GroupName>Filesystem</GroupName>
           <Files>
             <File>
-              <FileName>drv_common.c</FileName>
+              <FileName>dfs_posix.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\libraries\HAL_Drivers\drv_common.c</FilePath>
+              <FilePath>..\..\..\components\dfs\src\dfs_posix.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>dfs_fs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\dfs\src\dfs_fs.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>dfs.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\dfs\src\dfs.c</FilePath>
+            </File>
+          </Files>
+          <Files>
+            <File>
+              <FileName>dfs_file.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\dfs\src\dfs_file.c</FilePath>
             </File>
           </Files>
         </Group>
@@ -605,6 +664,13 @@
               <FilePath>..\..\..\components\finsh\msh.c</FilePath>
             </File>
           </Files>
+          <Files>
+            <File>
+              <FileName>msh_parse.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\msh_parse.c</FilePath>
+            </File>
+          </Files>
           <Files>
             <File>
               <FileName>cmd.c</FileName>
@@ -612,98 +678,105 @@
               <FilePath>..\..\..\components\finsh\cmd.c</FilePath>
             </File>
           </Files>
+          <Files>
+            <File>
+              <FileName>msh_file.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\msh_file.c</FilePath>
+            </File>
+          </Files>
         </Group>
         <Group>
           <GroupName>Kernel</GroupName>
           <Files>
             <File>
-              <FileName>ipc.c</FileName>
+              <FileName>clock.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\ipc.c</FilePath>
+              <FilePath>..\..\..\src\clock.c</FilePath>
             </File>
           </Files>
           <Files>
             <File>
-              <FileName>irq.c</FileName>
+              <FileName>components.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\irq.c</FilePath>
+              <FilePath>..\..\..\src\components.c</FilePath>
             </File>
           </Files>
           <Files>
             <File>
-              <FileName>thread.c</FileName>
+              <FileName>device.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\thread.c</FilePath>
+              <FilePath>..\..\..\src\device.c</FilePath>
             </File>
           </Files>
           <Files>
             <File>
-              <FileName>kservice.c</FileName>
+              <FileName>idle.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\kservice.c</FilePath>
+              <FilePath>..\..\..\src\idle.c</FilePath>
             </File>
           </Files>
           <Files>
             <File>
-              <FileName>device.c</FileName>
+              <FileName>ipc.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\device.c</FilePath>
+              <FilePath>..\..\..\src\ipc.c</FilePath>
             </File>
           </Files>
           <Files>
             <File>
-              <FileName>object.c</FileName>
+              <FileName>irq.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\object.c</FilePath>
+              <FilePath>..\..\..\src\irq.c</FilePath>
             </File>
           </Files>
           <Files>
             <File>
-              <FileName>timer.c</FileName>
+              <FileName>kservice.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\timer.c</FilePath>
+              <FilePath>..\..\..\src\kservice.c</FilePath>
             </File>
           </Files>
           <Files>
             <File>
-              <FileName>clock.c</FileName>
+              <FileName>mem.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\clock.c</FilePath>
+              <FilePath>..\..\..\src\mem.c</FilePath>
             </File>
           </Files>
           <Files>
             <File>
-              <FileName>idle.c</FileName>
+              <FileName>mempool.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\idle.c</FilePath>
+              <FilePath>..\..\..\src\mempool.c</FilePath>
             </File>
           </Files>
           <Files>
             <File>
-              <FileName>scheduler.c</FileName>
+              <FileName>object.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\scheduler.c</FilePath>
+              <FilePath>..\..\..\src\object.c</FilePath>
             </File>
           </Files>
           <Files>
             <File>
-              <FileName>mempool.c</FileName>
+              <FileName>scheduler.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\mempool.c</FilePath>
+              <FilePath>..\..\..\src\scheduler.c</FilePath>
             </File>
           </Files>
           <Files>
             <File>
-              <FileName>components.c</FileName>
+              <FileName>thread.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\components.c</FilePath>
+              <FilePath>..\..\..\src\thread.c</FilePath>
             </File>
           </Files>
           <Files>
             <File>
-              <FileName>mem.c</FileName>
+              <FileName>timer.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\mem.c</FilePath>
+              <FilePath>..\..\..\src\timer.c</FilePath>
             </File>
           </Files>
         </Group>

bsp/stm32/stm32f407-robomaster-c/project.uvprojx

@@ -1,7 +1,10 @@
 <?xml version="1.0" encoding="UTF-8" standalone="no" ?>
 <Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
   <SchemaVersion>2.1</SchemaVersion>
+
   <Header>### uVision Project, (C) Keil Software</Header>
+
   <Targets>
     <Target>
       <TargetName>rt-thread</TargetName>
@@ -13,31 +16,31 @@
         <TargetCommonOption>
           <Device>STM32F407IGHx</Device>
           <Vendor>STMicroelectronics</Vendor>
-          <PackID>Keil.STM32F4xx_DFP.2.15.0</PackID>
+          <PackID>Keil.STM32F4xx_DFP.2.16.0</PackID>
           <PackURL>http://www.keil.com/pack/</PackURL>
           <Cpu>IRAM(0x20000000,0x00020000) IRAM2(0x10000000,0x00010000) IROM(0x08000000,0x00100000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE</Cpu>
-          <FlashUtilSpec />
-          <StartupFile />
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
           <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32F407IGHx$CMSIS\Flash\STM32F4xx_1024.FLM))</FlashDriverDll>
           <DeviceId>0</DeviceId>
           <RegisterFile>$$Device:STM32F407IGHx$Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h</RegisterFile>
-          <MemoryEnv />
-          <Cmp />
-          <Asm />
-          <Linker />
-          <OHString />
-          <InfinionOptionDll />
-          <SLE66CMisc />
-          <SLE66AMisc />
-          <SLE66LinkerMisc />
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
           <SFDFile>$$Device:STM32F407IGHx$CMSIS\SVD\STM32F40x.svd</SFDFile>
           <bCustSvd>0</bCustSvd>
           <UseEnv>0</UseEnv>
-          <BinPath />
-          <IncludePath />
-          <LibPath />
-          <RegisterFilePath />
-          <DBRegisterFilePath />
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
           <TargetStatus>
             <Error>0</Error>
             <ExitCodeStop>0</ExitCodeStop>
@@ -59,8 +62,8 @@
           <BeforeCompile>
             <RunUserProg1>0</RunUserProg1>
             <RunUserProg2>0</RunUserProg2>
-            <UserProg1Name />
-            <UserProg2Name />
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
             <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
             <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
             <nStopU1X>0</nStopU1X>
@@ -69,8 +72,8 @@
           <BeforeMake>
             <RunUserProg1>0</RunUserProg1>
             <RunUserProg2>0</RunUserProg2>
-            <UserProg1Name />
-            <UserProg2Name />
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
             <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
             <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
             <nStopB1X>0</nStopB1X>
@@ -80,14 +83,14 @@
             <RunUserProg1>1</RunUserProg1>
             <RunUserProg2>0</RunUserProg2>
             <UserProg1Name>fromelf --bin !L --output rtthread.bin</UserProg1Name>
-            <UserProg2Name />
+            <UserProg2Name></UserProg2Name>
             <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
             <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
             <nStopA1X>0</nStopA1X>
             <nStopA2X>0</nStopA2X>
           </AfterMake>
           <SelectedForBatchBuild>0</SelectedForBatchBuild>
-          <SVCSIdString />
+          <SVCSIdString></SVCSIdString>
         </TargetCommonOption>
         <CommonProperty>
           <UseCPPCompiler>0</UseCPPCompiler>
@@ -101,8 +104,8 @@
           <AssembleAssemblyFile>0</AssembleAssemblyFile>
           <PublicsOnly>0</PublicsOnly>
           <StopOnExitCode>3</StopOnExitCode>
-          <CustomArgument />
-          <IncludeLibraryModules />
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
           <ComprImg>1</ComprImg>
         </CommonProperty>
         <DllOption>
@@ -135,11 +138,11 @@
           </Flash1>
           <bUseTDR>1</bUseTDR>
           <Flash2>BIN\UL2CM3.DLL</Flash2>
-          <Flash3 />
-          <Flash4 />
-          <pFcarmOut />
-          <pFcarmGrp />
-          <pFcArmRoot />
+          <Flash3></Flash3>
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
           <FcArmLst>0</FcArmLst>
         </Utilities>
         <TargetArmAds>
@@ -172,7 +175,7 @@
             <RvctClst>0</RvctClst>
             <GenPPlst>0</GenPPlst>
             <AdsCpuType>"Cortex-M4"</AdsCpuType>
-            <RvctDeviceName />
+            <RvctDeviceName></RvctDeviceName>
             <mOS>0</mOS>
             <uocRom>0</uocRom>
             <uocRam>0</uocRam>
@@ -181,7 +184,6 @@
             <hadXRAM>0</hadXRAM>
             <uocXRam>0</uocXRam>
             <RvdsVP>2</RvdsVP>
-            <RvdsMve>0</RvdsMve>
             <hadIRAM2>1</hadIRAM2>
             <hadIROM2>0</hadIROM2>
             <StupSel>8</StupSel>
@@ -305,7 +307,7 @@
                 <Size>0x10000</Size>
               </OCR_RVCT10>
             </OnChipMemories>
-            <RvctStartVector />
+            <RvctStartVector></RvctStartVector>
           </ArmAdsMisc>
           <Cads>
             <interw>1</interw>
@@ -332,10 +334,10 @@
             <v6WtE>0</v6WtE>
             <v6Rtti>0</v6Rtti>
             <VariousControls>
-              <MiscControls />
-              <Define>USE_HAL_DRIVER, STM32F407xx, __RTTHREAD__, RT_USING_ARM_LIBC, __CLK_TCK=RT_TICK_PER_SECOND</Define>
-              <Undefine />
-              <IncludePath>applications;.;..\..\..\components\libc\compilers\common;..\..\..\components\libc\compilers\common\extension;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\components\finsh;.;..\..\..\include;..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc;..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include;..\libraries\STM32F4xx_HAL\CMSIS\Include;..\..\..\components\libc\posix\io\poll;..\..\..\components\libc\posix\io\stdio;..\..\..\components\libc\posix\ipc</IncludePath>
+              <MiscControls></MiscControls>
+              <Define>RT_USING_LIBC, USE_HAL_DRIVER, STM32F407xx, __CLK_TCK=RT_TICK_PER_SECOND, __STDC_LIMIT_MACROS, __RTTHREAD__, RT_USING_ARM_LIBC</Define>
+              <Undefine></Undefine>
+              <IncludePath>applications;.;..\..\..\components\libc\compilers\common\include;..\..\..\components\libc\compilers\common\extension;..\..\..\components\libc\compilers\common\extension\fcntl\octal;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\libraries\HAL_Drivers\CMSIS\Include;..\..\..\components\finsh;.;..\..\..\include;..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc;..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include;..\..\..\components\libc\posix\io\poll;..\..\..\components\libc\posix\io\stdio;..\..\..\components\libc\posix\ipc</IncludePath>
             </VariousControls>
           </Cads>
           <Aads>
@@ -350,10 +352,10 @@
             <useXO>0</useXO>
             <uClangAs>0</uClangAs>
             <VariousControls>
-              <MiscControls />
-              <Define />
-              <Undefine />
-              <IncludePath />
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
             </VariousControls>
           </Aads>
           <LDads>
@@ -365,13 +367,13 @@
             <useFile>0</useFile>
             <TextAddressRange>0x08000000</TextAddressRange>
             <DataAddressRange>0x20000000</DataAddressRange>
-            <pXoBase />
+            <pXoBase></pXoBase>
             <ScatterFile>.\board\linker_scripts\link.sct</ScatterFile>
-            <IncludeLibs />
-            <IncludeLibsPath />
-            <Misc />
-            <LinkerInputFile />
-            <DisabledWarnings />
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
           </LDads>
         </TargetArmAds>
       </TargetOption>
@@ -389,65 +391,71 @@
         <Group>
           <GroupName>Compiler</GroupName>
           <Files>
+            <File>
+              <FileName>syscall_mem.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\libc\compilers\armlibc\syscall_mem.c</FilePath>
+            </File>
             <File>
               <FileName>syscalls.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\libc\compilers\armlibc\syscalls.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>syscall_mem.c</FileName>
+              <FileName>cctype.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\components\libc\compilers\armlibc\syscall_mem.c</FilePath>
+              <FilePath>..\..\..\components\libc\compilers\common\cctype.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>stdlib.c</FileName>
+              <FileName>cstdio.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\components\libc\compilers\common\stdlib.c</FilePath>
+              <FilePath>..\..\..\components\libc\compilers\common\cstdio.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>time.c</FileName>
+              <FileName>cstdlib.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\components\libc\compilers\common\time.c</FilePath>
+              <FilePath>..\..\..\components\libc\compilers\common\cstdlib.c</FilePath>
+            </File>
+            <File>
+              <FileName>cstring.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\libc\compilers\common\cstring.c</FilePath>
+            </File>
+            <File>
+              <FileName>ctime.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\libc\compilers\common\ctime.c</FilePath>
+            </File>
+            <File>
+              <FileName>cwchar.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\libc\compilers\common\cwchar.c</FilePath>
             </File>
           </Files>
         </Group>
         <Group>
           <GroupName>CPU</GroupName>
           <Files>
+            <File>
+              <FileName>backtrace.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath>
+            </File>
             <File>
               <FileName>div0.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\libcpu\arm\common\div0.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>showmem.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\libcpu\arm\common\showmem.c</FilePath>
             </File>
-          </Files>
-          <Files>
-            <File>
-              <FileName>backtrace.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\..\libcpu\arm\common\backtrace.c</FilePath>
-            </File>
-          </Files>
-          <Files>
             <File>
               <FileName>context_rvds.S</FileName>
               <FileType>2</FileType>
               <FilePath>..\..\..\libcpu\arm\cortex-m4\context_rvds.S</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>cpuport.c</FileName>
               <FileType>1</FileType>
@@ -457,63 +465,47 @@
         </Group>
         <Group>
           <GroupName>DeviceDrivers</GroupName>
-          <Files>
-            <File>
-              <FileName>dataqueue.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\..\components\drivers\ipc\dataqueue.c</FilePath>
-            </File>
-          </Files>
-          <Files>
-            <File>
-              <FileName>workqueue.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\..\components\drivers\ipc\workqueue.c</FilePath>
-            </File>
-          </Files>
           <Files>
             <File>
               <FileName>completion.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\ipc\completion.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>waitqueue.c</FileName>
+              <FileName>dataqueue.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\components\drivers\ipc\waitqueue.c</FilePath>
+              <FilePath>..\..\..\components\drivers\ipc\dataqueue.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>pipe.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\ipc\pipe.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>ringblk_buf.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\ipc\ringblk_buf.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>ringbuffer.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\ipc\ringbuffer.c</FilePath>
             </File>
-          </Files>
-          <Files>
+            <File>
+              <FileName>waitqueue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\ipc\waitqueue.c</FilePath>
+            </File>
+            <File>
+              <FileName>workqueue.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\drivers\ipc\workqueue.c</FilePath>
+            </File>
             <File>
               <FileName>pin.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\drivers\misc\pin.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>serial.c</FileName>
               <FileType>1</FileType>
@@ -523,48 +515,38 @@
         </Group>
         <Group>
           <GroupName>Drivers</GroupName>
-          <Files>
-            <File>
-              <FileName>stm32f4xx_hal_msp.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>board\CubeMX_Config\Src\stm32f4xx_hal_msp.c</FilePath>
-            </File>
-          </Files>
           <Files>
             <File>
               <FileName>startup_stm32f407xx.s</FileName>
               <FileType>2</FileType>
               <FilePath>..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\arm\startup_stm32f407xx.s</FilePath>
             </File>
-          </Files>
-          <Files>
+            <File>
+              <FileName>stm32f4xx_hal_msp.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>board\CubeMX_Config\Src\stm32f4xx_hal_msp.c</FilePath>
+            </File>
             <File>
               <FileName>board.c</FileName>
               <FileType>1</FileType>
               <FilePath>board\board.c</FilePath>
             </File>
-          </Files>
-          <Files>
+            <File>
+              <FileName>drv_common.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\libraries\HAL_Drivers\drv_common.c</FilePath>
+            </File>
             <File>
               <FileName>drv_gpio.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\HAL_Drivers\drv_gpio.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>drv_usart.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\HAL_Drivers\drv_usart.c</FilePath>
             </File>
           </Files>
-          <Files>
-            <File>
-              <FileName>drv_common.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\libraries\HAL_Drivers\drv_common.c</FilePath>
-            </File>
-          </Files>
         </Group>
         <Group>
           <GroupName>Finsh</GroupName>
@@ -574,15 +556,16 @@
               <FileType>1</FileType>
               <FilePath>..\..\..\components\finsh\shell.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>msh.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\..\..\components\finsh\msh.c</FilePath>
             </File>
-          </Files>
-          <Files>
+            <File>
+              <FileName>msh_parse.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\components\finsh\msh_parse.c</FilePath>
+            </File>
             <File>
               <FileName>cmd.c</FileName>
               <FileType>1</FileType>
@@ -594,93 +577,69 @@
           <GroupName>Kernel</GroupName>
           <Files>
             <File>
-              <FileName>device.c</FileName>
+              <FileName>clock.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\device.c</FilePath>
+              <FilePath>..\..\..\src\clock.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>object.c</FileName>
+              <FileName>components.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\object.c</FilePath>
+              <FilePath>..\..\..\src\components.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>timer.c</FileName>
+              <FileName>device.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\timer.c</FilePath>
+              <FilePath>..\..\..\src\device.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>irq.c</FileName>
+              <FileName>idle.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\irq.c</FilePath>
+              <FilePath>..\..\..\src\idle.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>scheduler.c</FileName>
+              <FileName>ipc.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\scheduler.c</FilePath>
+              <FilePath>..\..\..\src\ipc.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>clock.c</FileName>
+              <FileName>irq.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\clock.c</FilePath>
+              <FilePath>..\..\..\src\irq.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>components.c</FileName>
+              <FileName>kservice.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\components.c</FilePath>
+              <FilePath>..\..\..\src\kservice.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>thread.c</FileName>
+              <FileName>mem.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\thread.c</FilePath>
+              <FilePath>..\..\..\src\mem.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>idle.c</FileName>
+              <FileName>mempool.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\idle.c</FilePath>
+              <FilePath>..\..\..\src\mempool.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>mem.c</FileName>
+              <FileName>object.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\mem.c</FilePath>
+              <FilePath>..\..\..\src\object.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>mempool.c</FileName>
+              <FileName>scheduler.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\mempool.c</FilePath>
+              <FilePath>..\..\..\src\scheduler.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>kservice.c</FileName>
+              <FileName>thread.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\kservice.c</FilePath>
+              <FilePath>..\..\..\src\thread.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
-              <FileName>ipc.c</FileName>
+              <FileName>timer.c</FileName>
               <FileType>1</FileType>
-              <FilePath>..\..\..\src\ipc.c</FilePath>
+              <FilePath>..\..\..\src\timer.c</FilePath>
             </File>
           </Files>
         </Group>
@@ -692,113 +651,81 @@
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>stm32f4xx_hal_cryp_ex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp_ex.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>stm32f4xx_hal_pwr_ex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>stm32f4xx_hal_rng.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>stm32f4xx_hal_dma.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>stm32f4xx_hal.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>stm32f4xx_hal_rcc_ex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>stm32f4xx_hal_usart.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_usart.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>stm32f4xx_hal_cec.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cec.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>stm32f4xx_hal_rcc.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>stm32f4xx_hal_dma_ex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>stm32f4xx_hal_pwr.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>system_stm32f4xx.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>stm32f4xx_hal_crc.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_crc.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>stm32f4xx_hal_cortex.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>stm32f4xx_hal_cryp.c</FileName>
               <FileType>1</FileType>
               <FilePath>..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp.c</FilePath>
             </File>
-          </Files>
-          <Files>
             <File>
               <FileName>stm32f4xx_hal_gpio.c</FileName>
               <FileType>1</FileType>
@@ -809,9 +736,11 @@
       </Groups>
     </Target>
   </Targets>
+
   <RTE>
-    <apis />
-    <components />
-    <files />
+    <apis/>
+    <components/>
+    <files/>
   </RTE>
+
 </Project>

bsp/stm32/stm32f407-robomaster-c/rtconfig.h

@@ -17,11 +17,14 @@
 #define RT_USING_IDLE_HOOK
 #define RT_IDLE_HOOK_LIST_SIZE 4
 #define IDLE_THREAD_STACK_SIZE 256
+#define RT_USING_TIMER_SOFT
+#define RT_TIMER_THREAD_PRIO 4
+#define RT_TIMER_THREAD_STACK_SIZE 512
 
 /* kservice optimization */
 
+#define RT_KSERVICE_USING_STDLIB
 #define RT_DEBUG
-#define RT_DEBUG_COLOR
 
 /* Inter-Thread communication */
 
@@ -44,7 +47,7 @@
 #define RT_USING_CONSOLE
 #define RT_CONSOLEBUF_SIZE 128
 #define RT_CONSOLE_DEVICE_NAME "uart1"
-#define RT_VER_NUM 0x40100
+#define RT_VER_NUM 0x40101
 #define ARCH_ARM
 #define RT_USING_CPU_FFS
 #define ARCH_ARM_CORTEX_M
@@ -150,9 +153,6 @@
 /* enhanced kernel services */
 
 
-/* POSIX extension functions */
-
-
 /* acceleration: Assembly language or algorithmic acceleration packages */
 
 
@@ -165,6 +165,9 @@
 /* peripheral libraries and drivers */
 
 
+/* Kendryte SDK */
+
+
 /* AI packages */