!21 K210修复uart_init函数重复定义问题

Merge pull request !21 from asd7893361/master

bsp/k210/.config

@@ -15,7 +15,7 @@ CONFIG_RT_ALIGN_SIZE=8
 CONFIG_RT_THREAD_PRIORITY_32=y
 # CONFIG_RT_THREAD_PRIORITY_256 is not set
 CONFIG_RT_THREAD_PRIORITY_MAX=32
-CONFIG_RT_TICK_PER_SECOND=100
+CONFIG_RT_TICK_PER_SECOND=1000
 CONFIG_RT_USING_OVERFLOW_CHECK=y
 CONFIG_RT_USING_HOOK=y
 CONFIG_RT_USING_IDLE_HOOK=y
@@ -50,10 +50,11 @@ CONFIG_RT_USING_SIGNALS=y
 # Memory Management
 #
 CONFIG_RT_USING_MEMPOOL=y
-# CONFIG_RT_USING_MEMHEAP is not set
+CONFIG_RT_USING_MEMHEAP=y
 # CONFIG_RT_USING_NOHEAP is not set
 # CONFIG_RT_USING_SMALL_MEM is not set
 CONFIG_RT_USING_SLAB=y
+# CONFIG_RT_USING_MEMHEAP_AS_HEAP is not set
 CONFIG_RT_USING_HEAP=y
 
 #
@@ -65,8 +66,9 @@ CONFIG_RT_USING_DEVICE=y
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=128
 CONFIG_RT_CONSOLE_DEVICE_NAME="uarths"
-CONFIG_RT_VER_NUM=0x40001
+CONFIG_RT_VER_NUM=0x40003
 CONFIG_ARCH_CPU_64BIT=y
+# CONFIG_RT_USING_CPU_FFS is not set
 CONFIG_ARCH_RISCV=y
 CONFIG_ARCH_RISCV64=y
 # CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
@@ -153,7 +155,6 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_PWM is not set
 # CONFIG_RT_USING_MTD_NOR is not set
 # CONFIG_RT_USING_MTD_NAND is not set
-# CONFIG_RT_USING_MTD is not set
 # CONFIG_RT_USING_PM is not set
 # CONFIG_RT_USING_RTC is not set
 # CONFIG_RT_USING_SDIO is not set
@@ -164,18 +165,17 @@ CONFIG_RT_USING_SFUD=y
 CONFIG_RT_SFUD_USING_SFDP=y
 CONFIG_RT_SFUD_USING_FLASH_INFO_TABLE=y
 # CONFIG_RT_SFUD_USING_QSPI is not set
+CONFIG_RT_SFUD_SPI_MAX_HZ=50000000
 CONFIG_RT_DEBUG_SFUD=y
-# CONFIG_RT_USING_W25QXX is not set
-# CONFIG_RT_USING_GD is not set
 # CONFIG_RT_USING_ENC28J60 is not set
 # CONFIG_RT_USING_SPI_WIFI is not set
 # CONFIG_RT_USING_WDT is not set
 # CONFIG_RT_USING_AUDIO is not set
 # CONFIG_RT_USING_SENSOR is not set
-
-#
-# Using WiFi
-#
+# CONFIG_RT_USING_TOUCH is not set
+# CONFIG_RT_USING_HWCRYPTO is not set
+# CONFIG_RT_USING_PULSE_ENCODER is not set
+# CONFIG_RT_USING_INPUT_CAPTURE is not set
 # CONFIG_RT_USING_WIFI is not set
 
 #
@@ -214,11 +214,6 @@ CONFIG_RT_USING_POSIX=y
 #
 # CONFIG_RT_USING_LWIP is not set
 
-#
-# Modbus master and slave stack
-#
-# CONFIG_RT_USING_MODBUS is not set
-
 #
 # AT commands
 #
@@ -233,7 +228,31 @@ CONFIG_RT_USING_POSIX=y
 # Utilities
 #
 # CONFIG_RT_USING_RYM is not set
-# CONFIG_RT_USING_ULOG is not set
+CONFIG_RT_USING_ULOG=y
+# CONFIG_ULOG_OUTPUT_LVL_A is not set
+# CONFIG_ULOG_OUTPUT_LVL_E is not set
+# CONFIG_ULOG_OUTPUT_LVL_W is not set
+# CONFIG_ULOG_OUTPUT_LVL_I is not set
+CONFIG_ULOG_OUTPUT_LVL_D=y
+CONFIG_ULOG_OUTPUT_LVL=7
+# CONFIG_ULOG_USING_ISR_LOG is not set
+CONFIG_ULOG_ASSERT_ENABLE=y
+CONFIG_ULOG_LINE_BUF_SIZE=128
+# CONFIG_ULOG_USING_ASYNC_OUTPUT is not set
+
+#
+# log format
+#
+# CONFIG_ULOG_OUTPUT_FLOAT is not set
+CONFIG_ULOG_USING_COLOR=y
+CONFIG_ULOG_OUTPUT_TIME=y
+# CONFIG_ULOG_TIME_USING_TIMESTAMP is not set
+CONFIG_ULOG_OUTPUT_LEVEL=y
+CONFIG_ULOG_OUTPUT_TAG=y
+# CONFIG_ULOG_OUTPUT_THREAD_NAME is not set
+CONFIG_ULOG_BACKEND_USING_CONSOLE=y
+# CONFIG_ULOG_USING_FILTER is not set
+# CONFIG_ULOG_USING_SYSLOG is not set
 # CONFIG_RT_USING_UTEST is not set
 
 #
@@ -247,10 +266,14 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_PKG_USING_WEBCLIENT is not set
 # CONFIG_PKG_USING_WEBNET is not set
 # CONFIG_PKG_USING_MONGOOSE is not set
+# CONFIG_PKG_USING_MYMQTT is not set
+# CONFIG_PKG_USING_KAWAII_MQTT is not set
+# CONFIG_PKG_USING_BC28_MQTT is not set
 # CONFIG_PKG_USING_WEBTERMINAL is not set
 # CONFIG_PKG_USING_CJSON is not set
 # CONFIG_PKG_USING_JSMN is not set
 # CONFIG_PKG_USING_LIBMODBUS is not set
+# CONFIG_PKG_USING_FREEMODBUS is not set
 # CONFIG_PKG_USING_LJSON is not set
 # CONFIG_PKG_USING_EZXML is not set
 # CONFIG_PKG_USING_NANOPB is not set
@@ -272,6 +295,8 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_PKG_USING_COAP is not set
 # CONFIG_PKG_USING_NOPOLL is not set
 # CONFIG_PKG_USING_NETUTILS is not set
+# CONFIG_PKG_USING_CMUX is not set
+# CONFIG_PKG_USING_PPP_DEVICE is not set
 # CONFIG_PKG_USING_AT_DEVICE is not set
 # CONFIG_PKG_USING_ATSRV_SOCKET is not set
 # CONFIG_PKG_USING_WIZNET is not set
@@ -283,10 +308,28 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_PKG_USING_GAGENT_CLOUD is not set
 # CONFIG_PKG_USING_ALI_IOTKIT is not set
 # CONFIG_PKG_USING_AZURE is not set
-# CONFIG_PKG_USING_TENCENT_IOTKIT is not set
+# CONFIG_PKG_USING_TENCENT_IOTHUB is not set
+# CONFIG_PKG_USING_JIOT-C-SDK is not set
+# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set
+# CONFIG_PKG_USING_JOYLINK is not set
 # CONFIG_PKG_USING_NIMBLE is not set
 # CONFIG_PKG_USING_OTA_DOWNLOADER is not set
 # CONFIG_PKG_USING_IPMSG is not set
+# CONFIG_PKG_USING_LSSDP is not set
+# CONFIG_PKG_USING_AIRKISS_OPEN is not set
+# CONFIG_PKG_USING_LIBRWS is not set
+# CONFIG_PKG_USING_TCPSERVER is not set
+# CONFIG_PKG_USING_PROTOBUF_C is not set
+# CONFIG_PKG_USING_ONNX_PARSER is not set
+# CONFIG_PKG_USING_ONNX_BACKEND is not set
+# CONFIG_PKG_USING_DLT645 is not set
+# CONFIG_PKG_USING_QXWZ is not set
+# CONFIG_PKG_USING_SMTP_CLIENT is not set
+# CONFIG_PKG_USING_ABUP_FOTA is not set
+# CONFIG_PKG_USING_LIBCURL2RTT is not set
+# CONFIG_PKG_USING_CAPNP is not set
+# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
+# CONFIG_PKG_USING_AGILE_TELNET is not set
 
 #
 # security packages
@@ -294,6 +337,7 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_PKG_USING_MBEDTLS is not set
 # CONFIG_PKG_USING_libsodium is not set
 # CONFIG_PKG_USING_TINYCRYPT is not set
+# CONFIG_PKG_USING_TFM is not set
 
 #
 # language packages
@@ -308,6 +352,8 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_PKG_USING_OPENMV is not set
 # CONFIG_PKG_USING_MUPDF is not set
 # CONFIG_PKG_USING_STEMWIN is not set
+# CONFIG_PKG_USING_WAVPLAYER is not set
+# CONFIG_PKG_USING_TJPGD is not set
 
 #
 # tools packages
@@ -320,6 +366,13 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_PKG_USING_QRCODE is not set
 # CONFIG_PKG_USING_ULOG_EASYFLASH is not set
 # CONFIG_PKG_USING_ADBD is not set
+# CONFIG_PKG_USING_COREMARK is not set
+# CONFIG_PKG_USING_DHRYSTONE is not set
+# CONFIG_PKG_USING_NR_MICRO_SHELL is not set
+# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set
+# CONFIG_PKG_USING_LUNAR_CALENDAR is not set
+# CONFIG_PKG_USING_BS8116A is not set
+# CONFIG_PKG_USING_URLENCODE is not set
 
 #
 # system packages
@@ -330,6 +383,7 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_PKG_USING_LWEXT4 is not set
 # CONFIG_PKG_USING_PARTITION is not set
 # CONFIG_PKG_USING_FAL is not set
+# CONFIG_PKG_USING_FLASHDB is not set
 # CONFIG_PKG_USING_SQLITE is not set
 # CONFIG_PKG_USING_RTI is not set
 # CONFIG_PKG_USING_LITTLEVGL2RTT is not set
@@ -337,6 +391,11 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_PKG_USING_DFS_YAFFS is not set
 # CONFIG_PKG_USING_LITTLEFS is not set
 # CONFIG_PKG_USING_THREAD_POOL is not set
+# CONFIG_PKG_USING_ROBOTS is not set
+# CONFIG_PKG_USING_EV is not set
+# CONFIG_PKG_USING_SYSWATCH is not set
+# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set
+# CONFIG_PKG_USING_PLCCORE is not set
 
 #
 # peripheral libraries and drivers
@@ -344,13 +403,20 @@ CONFIG_RT_USING_POSIX=y
 # CONFIG_PKG_USING_SENSORS_DRIVERS is not set
 # CONFIG_PKG_USING_REALTEK_AMEBA is not set
 # CONFIG_PKG_USING_SHT2X is not set
-# CONFIG_PKG_USING_AP3216C is not set
+# CONFIG_PKG_USING_SHT3X is not set
 # CONFIG_PKG_USING_STM32_SDIO is not set
 # CONFIG_PKG_USING_ICM20608 is not set
 # CONFIG_PKG_USING_U8G2 is not set
 # CONFIG_PKG_USING_BUTTON is not set
 # CONFIG_PKG_USING_PCF8574 is not set
 # CONFIG_PKG_USING_SX12XX is not set
+# CONFIG_PKG_USING_SIGNAL_LED is not set
+# CONFIG_PKG_USING_LEDBLINK is not set
+# CONFIG_PKG_USING_LITTLED is not set
+# CONFIG_PKG_USING_LKDGUI is not set
+# CONFIG_PKG_USING_NRF5X_SDK is not set
+# CONFIG_PKG_USING_NRFX is not set
+# CONFIG_PKG_USING_WM_LIBRARIES is not set
 CONFIG_PKG_USING_KENDRYTE_SDK=y
 CONFIG_PKG_KENDRYTE_SDK_PATH="/packages/peripherals/kendryte-sdk"
 # CONFIG_PKG_USING_KENDRYTE_SDK_V052 is not set
@@ -362,8 +428,28 @@ CONFIG_PKG_KENDRYTE_SDK_VER="v0.5.5"
 CONFIG_PKG_KENDRYTE_SDK_VERNUM=0x0055
 # CONFIG_PKG_USING_INFRARED is not set
 # CONFIG_PKG_USING_ROSSERIAL is not set
+# CONFIG_PKG_USING_AGILE_BUTTON is not set
+# CONFIG_PKG_USING_AGILE_LED is not set
 # CONFIG_PKG_USING_AT24CXX is not set
 # CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set
+# CONFIG_PKG_USING_AD7746 is not set
+# CONFIG_PKG_USING_PCA9685 is not set
+# CONFIG_PKG_USING_I2C_TOOLS is not set
+# CONFIG_PKG_USING_NRF24L01 is not set
+# CONFIG_PKG_USING_TOUCH_DRIVERS is not set
+# CONFIG_PKG_USING_MAX17048 is not set
+# CONFIG_PKG_USING_RPLIDAR is not set
+# CONFIG_PKG_USING_AS608 is not set
+# CONFIG_PKG_USING_RC522 is not set
+# CONFIG_PKG_USING_EMBARC_BSP is not set
+# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set
+# CONFIG_PKG_USING_MULTI_RTIMER is not set
+# CONFIG_PKG_USING_MAX7219 is not set
+# CONFIG_PKG_USING_BEEP is not set
+# CONFIG_PKG_USING_EASYBLINK is not set
+# CONFIG_PKG_USING_PMS_SERIES is not set
+# CONFIG_PKG_USING_NUCLEI_SDK is not set
+# CONFIG_PKG_USING_CAN_YMODEM is not set
 
 #
 # miscellaneous packages
@@ -374,11 +460,15 @@ CONFIG_PKG_KENDRYTE_SDK_VERNUM=0x0055
 # CONFIG_PKG_USING_MINILZO is not set
 # CONFIG_PKG_USING_QUICKLZ is not set
 # CONFIG_PKG_USING_MULTIBUTTON is not set
+# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set
 # CONFIG_PKG_USING_CANFESTIVAL is not set
 # CONFIG_PKG_USING_ZLIB is not set
 # CONFIG_PKG_USING_DSTR is not set
 # CONFIG_PKG_USING_TINYFRAME is not set
 # CONFIG_PKG_USING_KENDRYTE_DEMO is not set
+# CONFIG_PKG_USING_DIGITALCTRL is not set
+# CONFIG_PKG_USING_UPACKER is not set
+# CONFIG_PKG_USING_UPARAM is not set
 
 #
 # samples: kernel and components samples
@@ -389,54 +479,39 @@ CONFIG_PKG_KENDRYTE_SDK_VERNUM=0x0055
 # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
 # CONFIG_PKG_USING_HELLO is not set
 # CONFIG_PKG_USING_VI is not set
+# CONFIG_PKG_USING_NNOM is not set
+# CONFIG_PKG_USING_LIBANN is not set
+# CONFIG_PKG_USING_ELAPACK is not set
+# CONFIG_PKG_USING_ARMv7M_DWT is not set
+# CONFIG_PKG_USING_VT100 is not set
+# CONFIG_PKG_USING_ULAPACK is not set
+# CONFIG_PKG_USING_UKAL is not set
+CONFIG_BOARD_K210_EVB=y
+CONFIG_BSP_USING_UART_HS=y
 
 #
-# Privated Packages of RealThread
-#
-# CONFIG_PKG_USING_CODEC is not set
-# CONFIG_PKG_USING_PLAYER is not set
-# CONFIG_PKG_USING_MPLAYER is not set
-# CONFIG_PKG_USING_PERSIMMON_SRC is not set
-# CONFIG_PKG_USING_JS_PERSIMMON is not set
-# CONFIG_PKG_USING_JERRYSCRIPT_WIN32 is not set
-
-#
-# Network Utilities
+# General Purpose UARTs
 #
-# CONFIG_PKG_USING_WICED is not set
-# CONFIG_PKG_USING_CLOUDSDK is not set
-# CONFIG_PKG_USING_COREMARK is not set
-# CONFIG_PKG_USING_POWER_MANAGER is not set
-# CONFIG_PKG_USING_RT_OTA is not set
-# CONFIG_PKG_USING_RDBD_SRC is not set
-# CONFIG_PKG_USING_RTINSIGHT is not set
-# CONFIG_PKG_USING_SMARTCONFIG is not set
-# CONFIG_PKG_USING_RTX is not set
-# CONFIG_RT_USING_TESTCASE is not set
-# CONFIG_PKG_USING_NGHTTP2 is not set
-# CONFIG_PKG_USING_AVS is not set
-# CONFIG_PKG_USING_STS is not set
-# CONFIG_PKG_USING_DLMS is not set
-CONFIG_BOARD_K210_EVB=y
-CONFIG_BSP_USING_UART_HS=y
-# CONFIG_BSP_USING_UART1 is not set
+CONFIG_BSP_USING_UART1=y
+CONFIG_BSP_UART1_TXD_PIN=20
+CONFIG_BSP_UART1_RXD_PIN=21
 # CONFIG_BSP_USING_UART2 is not set
 # CONFIG_BSP_USING_UART3 is not set
 # CONFIG_BSP_USING_I2C1 is not set
 CONFIG_BSP_USING_SPI1=y
 # CONFIG_BSP_USING_SPI1_AS_QSPI is not set
-CONFIG_BSP_SPI1_CLK_PIN=29
-CONFIG_BSP_SPI1_D0_PIN=30
-CONFIG_BSP_SPI1_D1_PIN=31
+CONFIG_BSP_SPI1_CLK_PIN=27
+CONFIG_BSP_SPI1_D0_PIN=28
+CONFIG_BSP_SPI1_D1_PIN=26
 CONFIG_BSP_SPI1_USING_SS0=y
-CONFIG_BSP_SPI1_SS0_PIN=32
+CONFIG_BSP_SPI1_SS0_PIN=29
 # CONFIG_BSP_SPI1_USING_SS1 is not set
 # CONFIG_BSP_SPI1_USING_SS2 is not set
 # CONFIG_BSP_SPI1_USING_SS3 is not set
 CONFIG_BSP_USING_LCD=y
-CONFIG_BSP_LCD_CS_PIN=6
-CONFIG_BSP_LCD_WR_PIN=7
-CONFIG_BSP_LCD_DC_PIN=8
+CONFIG_BSP_LCD_CS_PIN=36
+CONFIG_BSP_LCD_WR_PIN=39
+CONFIG_BSP_LCD_DC_PIN=38
 CONFIG_BSP_LCD_X_MAX=240
 CONFIG_BSP_LCD_Y_MAX=320
 CONFIG_BSP_USING_CAMERA=y

bsp/k210/driver/Kconfig

@@ -114,7 +114,7 @@ if BSP_USING_LCD
         int "CS pin number of 8080 interface"
         default 6
     config BSP_LCD_WR_PIN
-        int "DC pin number of 8080 interface"
+        int "WR pin number of 8080 interface"
         default 7
     config BSP_LCD_DC_PIN
         int "DC pin number of 8080 interface"

bsp/k210/driver/drv_uart.c

@@ -74,7 +74,7 @@ volatile uart_t* const  _uart[3] =
     (volatile uart_t*)UART3_BASE_ADDR
 };
 
-void uart_init(uart_device_number_t channel)
+void _uart_init(uart_device_number_t channel)
 {
     sysctl_clock_enable(SYSCTL_CLOCK_UART1 + channel);
     sysctl_reset(SYSCTL_RESET_UART1 + channel);
@@ -142,7 +142,7 @@ int rt_hw_uart_init(void)
         uart->hw_base   = UART1_BASE_ADDR;
         uart->irqno     = IRQN_UART1_INTERRUPT;
 
-        uart_init(UART_DEVICE_1);
+        _uart_init(UART_DEVICE_1);
 
         rt_hw_serial_register(serial,
                               "uart1",
@@ -166,7 +166,7 @@ int rt_hw_uart_init(void)
         uart->hw_base   = UART2_BASE_ADDR;
         uart->irqno     = IRQN_UART2_INTERRUPT;
 
-        uart_init(UART_DEVICE_2);
+        _uart_init(UART_DEVICE_2);
 
         rt_hw_serial_register(serial,
                               "uart2",
@@ -190,7 +190,7 @@ int rt_hw_uart_init(void)
         uart->hw_base   = UART3_BASE_ADDR;
         uart->irqno     = IRQN_UART3_INTERRUPT;
 
-        uart_init(UART_DEVICE_3);
+        _uart_init(UART_DEVICE_3);
 
         rt_hw_serial_register(serial,
                               "uart3",

bsp/k210/rtconfig.h

@@ -7,34 +7,21 @@
 /* RT-Thread Kernel */
 
 #define RT_NAME_MAX 8
-/* RT_USING_ARCH_DATA_TYPE is not set */
 #define RT_USING_SMP
 #define RT_CPUS_NR 2
 #define RT_ALIGN_SIZE 8
-/* RT_THREAD_PRIORITY_8 is not set */
 #define RT_THREAD_PRIORITY_32
-/* RT_THREAD_PRIORITY_256 is not set */
 #define RT_THREAD_PRIORITY_MAX 32
-#define RT_TICK_PER_SECOND 100
+#define RT_TICK_PER_SECOND 1000
 #define RT_USING_OVERFLOW_CHECK
 #define RT_USING_HOOK
 #define RT_USING_IDLE_HOOK
 #define RT_IDLE_HOOK_LIST_SIZE 4
 #define IDLE_THREAD_STACK_SIZE 4096
-/* RT_USING_TIMER_SOFT is not set */
 #define RT_DEBUG
 #define RT_DEBUG_COLOR
 #define RT_DEBUG_INIT_CONFIG
 #define RT_DEBUG_INIT 1
-/* RT_DEBUG_THREAD_CONFIG is not set */
-/* RT_DEBUG_SCHEDULER_CONFIG is not set */
-/* RT_DEBUG_IPC_CONFIG is not set */
-/* RT_DEBUG_TIMER_CONFIG is not set */
-/* RT_DEBUG_IRQ_CONFIG is not set */
-/* RT_DEBUG_MEM_CONFIG is not set */
-/* RT_DEBUG_SLAB_CONFIG is not set */
-/* RT_DEBUG_MEMHEAP_CONFIG is not set */
-/* RT_DEBUG_MODULE_CONFIG is not set */
 
 /* Inter-Thread communication */
 
@@ -48,25 +35,20 @@
 /* Memory Management */
 
 #define RT_USING_MEMPOOL
-/* RT_USING_MEMHEAP is not set */
-/* RT_USING_NOHEAP is not set */
-/* RT_USING_SMALL_MEM is not set */
+#define RT_USING_MEMHEAP
 #define RT_USING_SLAB
 #define RT_USING_HEAP
 
 /* Kernel Device Object */
 
 #define RT_USING_DEVICE
-/* RT_USING_DEVICE_OPS is not set */
-/* RT_USING_INTERRUPT_INFO is not set */
 #define RT_USING_CONSOLE
 #define RT_CONSOLEBUF_SIZE 128
 #define RT_CONSOLE_DEVICE_NAME "uarths"
-#define RT_VER_NUM 0x40001
+#define RT_VER_NUM 0x40003
 #define ARCH_CPU_64BIT
 #define ARCH_RISCV
 #define ARCH_RISCV64
-/* ARCH_CPU_STACK_GROWS_UPWARD is not set */
 
 /* RT-Thread Components */
 
@@ -77,7 +59,6 @@
 
 /* C++ features */
 
-/* RT_USING_CPLUSPLUS is not set */
 
 /* Command shell */
 
@@ -87,11 +68,9 @@
 #define FINSH_HISTORY_LINES 5
 #define FINSH_USING_SYMTAB
 #define FINSH_USING_DESCRIPTION
-/* FINSH_ECHO_DISABLE_DEFAULT is not set */
 #define FINSH_THREAD_PRIORITY 20
 #define FINSH_THREAD_STACK_SIZE 16384
 #define FINSH_CMD_SIZE 80
-/* FINSH_USING_AUTH is not set */
 #define FINSH_USING_MSH
 #define FINSH_USING_MSH_DEFAULT
 #define FINSH_USING_MSH_ONLY
@@ -104,298 +83,137 @@
 #define DFS_FILESYSTEMS_MAX 16
 #define DFS_FILESYSTEM_TYPES_MAX 16
 #define DFS_FD_MAX 64
-/* RT_USING_DFS_MNTTABLE is not set */
 #define RT_USING_DFS_ELMFAT
 
 /* elm-chan's FatFs, Generic FAT Filesystem Module */
 
 #define RT_DFS_ELM_CODE_PAGE 437
 #define RT_DFS_ELM_WORD_ACCESS
-/* RT_DFS_ELM_USE_LFN_0 is not set */
-/* RT_DFS_ELM_USE_LFN_1 is not set */
-/* RT_DFS_ELM_USE_LFN_2 is not set */
 #define RT_DFS_ELM_USE_LFN_3
 #define RT_DFS_ELM_USE_LFN 3
 #define RT_DFS_ELM_MAX_LFN 255
 #define RT_DFS_ELM_DRIVES 2
 #define RT_DFS_ELM_MAX_SECTOR_SIZE 4096
-/* RT_DFS_ELM_USE_ERASE is not set */
 #define RT_DFS_ELM_REENTRANT
 #define RT_USING_DFS_DEVFS
-/* RT_USING_DFS_ROMFS is not set */
-/* RT_USING_DFS_RAMFS is not set */
-/* RT_USING_DFS_UFFS is not set */
-/* RT_USING_DFS_JFFS2 is not set */
 
 /* Device Drivers */
 
 #define RT_USING_DEVICE_IPC
 #define RT_PIPE_BUFSZ 512
-/* RT_USING_SYSTEM_WORKQUEUE is not set */
 #define RT_USING_SERIAL
 #define RT_SERIAL_USING_DMA
 #define RT_SERIAL_RB_BUFSZ 64
-/* RT_USING_CAN is not set */
-/* RT_USING_HWTIMER is not set */
-/* RT_USING_CPUTIME is not set */
-/* RT_USING_I2C is not set */
 #define RT_USING_PIN
-/* RT_USING_ADC is not set */
-/* RT_USING_PWM is not set */
-/* RT_USING_MTD_NOR is not set */
-/* RT_USING_MTD_NAND is not set */
-/* RT_USING_MTD is not set */
-/* RT_USING_PM is not set */
-/* RT_USING_RTC is not set */
-/* RT_USING_SDIO is not set */
 #define RT_USING_SPI
-/* RT_USING_QSPI is not set */
 #define RT_USING_SPI_MSD
 #define RT_USING_SFUD
 #define RT_SFUD_USING_SFDP
 #define RT_SFUD_USING_FLASH_INFO_TABLE
-/* RT_SFUD_USING_QSPI is not set */
+#define RT_SFUD_SPI_MAX_HZ 50000000
 #define RT_DEBUG_SFUD
-/* RT_USING_W25QXX is not set */
-/* RT_USING_GD is not set */
-/* RT_USING_ENC28J60 is not set */
-/* RT_USING_SPI_WIFI is not set */
-/* RT_USING_WDT is not set */
-/* RT_USING_AUDIO is not set */
-/* RT_USING_SENSOR is not set */
-
-/* Using WiFi */
-
-/* RT_USING_WIFI is not set */
 
 /* Using USB */
 
-/* RT_USING_USB_HOST is not set */
-/* RT_USING_USB_DEVICE is not set */
 
 /* POSIX layer and C standard library */
 
 #define RT_USING_LIBC
-/* RT_USING_PTHREADS is not set */
 #define RT_USING_POSIX
-/* RT_USING_POSIX_MMAP is not set */
-/* RT_USING_POSIX_TERMIOS is not set */
-/* RT_USING_POSIX_AIO is not set */
-/* RT_USING_MODULE is not set */
 
 /* Network */
 
 /* Socket abstraction layer */
 
-/* RT_USING_SAL is not set */
 
 /* Network interface device */
 
-/* RT_USING_NETDEV is not set */
 
 /* light weight TCP/IP stack */
 
-/* RT_USING_LWIP is not set */
-
-/* Modbus master and slave stack */
-
-/* RT_USING_MODBUS is not set */
 
 /* AT commands */
 
-/* RT_USING_AT is not set */
 
 /* VBUS(Virtual Software BUS) */
 
-/* RT_USING_VBUS is not set */
 
 /* Utilities */
 
-/* RT_USING_RYM is not set */
-/* RT_USING_ULOG is not set */
-/* RT_USING_UTEST is not set */
+#define RT_USING_ULOG
+#define ULOG_OUTPUT_LVL_D
+#define ULOG_OUTPUT_LVL 7
+#define ULOG_ASSERT_ENABLE
+#define ULOG_LINE_BUF_SIZE 128
+
+/* log format */
+
+#define ULOG_USING_COLOR
+#define ULOG_OUTPUT_TIME
+#define ULOG_OUTPUT_LEVEL
+#define ULOG_OUTPUT_TAG
+#define ULOG_BACKEND_USING_CONSOLE
 
 /* RT-Thread online packages */
 
 /* IoT - internet of things */
 
-/* PKG_USING_PAHOMQTT is not set */
-/* PKG_USING_WEBCLIENT is not set */
-/* PKG_USING_WEBNET is not set */
-/* PKG_USING_MONGOOSE is not set */
-/* PKG_USING_WEBTERMINAL is not set */
-/* PKG_USING_CJSON is not set */
-/* PKG_USING_JSMN is not set */
-/* PKG_USING_LIBMODBUS is not set */
-/* PKG_USING_LJSON is not set */
-/* PKG_USING_EZXML is not set */
-/* PKG_USING_NANOPB is not set */
 
 /* Wi-Fi */
 
 /* Marvell WiFi */
 
-/* PKG_USING_WLANMARVELL is not set */
 
 /* Wiced WiFi */
 
-/* PKG_USING_WLAN_WICED is not set */
-/* PKG_USING_RW007 is not set */
-/* PKG_USING_COAP is not set */
-/* PKG_USING_NOPOLL is not set */
-/* PKG_USING_NETUTILS is not set */
-/* PKG_USING_AT_DEVICE is not set */
-/* PKG_USING_ATSRV_SOCKET is not set */
-/* PKG_USING_WIZNET is not set */
 
 /* IoT Cloud */
 
-/* PKG_USING_ONENET is not set */
-/* PKG_USING_GAGENT_CLOUD is not set */
-/* PKG_USING_ALI_IOTKIT is not set */
-/* PKG_USING_AZURE is not set */
-/* PKG_USING_TENCENT_IOTKIT is not set */
-/* PKG_USING_NIMBLE is not set */
-/* PKG_USING_OTA_DOWNLOADER is not set */
-/* PKG_USING_IPMSG is not set */
 
 /* security packages */
 
-/* PKG_USING_MBEDTLS is not set */
-/* PKG_USING_libsodium is not set */
-/* PKG_USING_TINYCRYPT is not set */
 
 /* language packages */
 
-/* PKG_USING_LUA is not set */
-/* PKG_USING_JERRYSCRIPT is not set */
-/* PKG_USING_MICROPYTHON is not set */
 
 /* multimedia packages */
 
-/* PKG_USING_OPENMV is not set */
-/* PKG_USING_MUPDF is not set */
-/* PKG_USING_STEMWIN is not set */
 
 /* tools packages */
 
-/* PKG_USING_CMBACKTRACE is not set */
-/* PKG_USING_EASYFLASH is not set */
-/* PKG_USING_EASYLOGGER is not set */
-/* PKG_USING_SYSTEMVIEW is not set */
-/* PKG_USING_RDB is not set */
-/* PKG_USING_QRCODE is not set */
-/* PKG_USING_ULOG_EASYFLASH is not set */
-/* PKG_USING_ADBD is not set */
 
 /* system packages */
 
-/* PKG_USING_GUIENGINE is not set */
-/* PKG_USING_CAIRO is not set */
-/* PKG_USING_PIXMAN is not set */
-/* PKG_USING_LWEXT4 is not set */
-/* PKG_USING_PARTITION is not set */
-/* PKG_USING_FAL is not set */
-/* PKG_USING_SQLITE is not set */
-/* PKG_USING_RTI is not set */
-/* PKG_USING_LITTLEVGL2RTT is not set */
-/* PKG_USING_CMSIS is not set */
-/* PKG_USING_DFS_YAFFS is not set */
-/* PKG_USING_LITTLEFS is not set */
-/* PKG_USING_THREAD_POOL is not set */
 
 /* peripheral libraries and drivers */
 
-/* PKG_USING_SENSORS_DRIVERS is not set */
-/* PKG_USING_REALTEK_AMEBA is not set */
-/* PKG_USING_SHT2X is not set */
-/* PKG_USING_AP3216C is not set */
-/* PKG_USING_STM32_SDIO is not set */
-/* PKG_USING_ICM20608 is not set */
-/* PKG_USING_U8G2 is not set */
-/* PKG_USING_BUTTON is not set */
-/* PKG_USING_PCF8574 is not set */
-/* PKG_USING_SX12XX is not set */
 #define PKG_USING_KENDRYTE_SDK
-/* PKG_USING_KENDRYTE_SDK_V052 is not set */
-/* PKG_USING_KENDRYTE_SDK_V053 is not set */
-/* PKG_USING_KENDRYTE_SDK_V054 is not set */
 #define PKG_USING_KENDRYTE_SDK_V055
-/* PKG_USING_KENDRYTE_SDK_LATEST_VERSION is not set */
 #define PKG_KENDRYTE_SDK_VERNUM 0x0055
-/* PKG_USING_INFRARED is not set */
-/* PKG_USING_ROSSERIAL is not set */
-/* PKG_USING_AT24CXX is not set */
-/* PKG_USING_MOTIONDRIVER2RTT is not set */
 
 /* miscellaneous packages */
 
-/* PKG_USING_LIBCSV is not set */
-/* PKG_USING_OPTPARSE is not set */
-/* PKG_USING_FASTLZ is not set */
-/* PKG_USING_MINILZO is not set */
-/* PKG_USING_QUICKLZ is not set */
-/* PKG_USING_MULTIBUTTON is not set */
-/* PKG_USING_CANFESTIVAL is not set */
-/* PKG_USING_ZLIB is not set */
-/* PKG_USING_DSTR is not set */
-/* PKG_USING_TINYFRAME is not set */
-/* PKG_USING_KENDRYTE_DEMO is not set */
 
 /* samples: kernel and components samples */
 
-/* PKG_USING_KERNEL_SAMPLES is not set */
-/* PKG_USING_FILESYSTEM_SAMPLES is not set */
-/* PKG_USING_NETWORK_SAMPLES is not set */
-/* PKG_USING_PERIPHERAL_SAMPLES is not set */
-/* PKG_USING_HELLO is not set */
-/* PKG_USING_VI is not set */
-
-/* Privated Packages of RealThread */
-
-/* PKG_USING_CODEC is not set */
-/* PKG_USING_PLAYER is not set */
-/* PKG_USING_MPLAYER is not set */
-/* PKG_USING_PERSIMMON_SRC is not set */
-/* PKG_USING_JS_PERSIMMON is not set */
-/* PKG_USING_JERRYSCRIPT_WIN32 is not set */
-
-/* Network Utilities */
-
-/* PKG_USING_WICED is not set */
-/* PKG_USING_CLOUDSDK is not set */
-/* PKG_USING_COREMARK is not set */
-/* PKG_USING_POWER_MANAGER is not set */
-/* PKG_USING_RT_OTA is not set */
-/* PKG_USING_RDBD_SRC is not set */
-/* PKG_USING_RTINSIGHT is not set */
-/* PKG_USING_SMARTCONFIG is not set */
-/* PKG_USING_RTX is not set */
-/* RT_USING_TESTCASE is not set */
-/* PKG_USING_NGHTTP2 is not set */
-/* PKG_USING_AVS is not set */
-/* PKG_USING_STS is not set */
-/* PKG_USING_DLMS is not set */
 #define BOARD_K210_EVB
 #define BSP_USING_UART_HS
-/* BSP_USING_UART1 is not set */
-/* BSP_USING_UART2 is not set */
-/* BSP_USING_UART3 is not set */
-/* BSP_USING_I2C1 is not set */
+
+/* General Purpose UARTs */
+
+#define BSP_USING_UART1
+#define BSP_UART1_TXD_PIN 20
+#define BSP_UART1_RXD_PIN 21
 #define BSP_USING_SPI1
-/* BSP_USING_SPI1_AS_QSPI is not set */
-#define BSP_SPI1_CLK_PIN 29
-#define BSP_SPI1_D0_PIN 30
-#define BSP_SPI1_D1_PIN 31
+#define BSP_SPI1_CLK_PIN 27
+#define BSP_SPI1_D0_PIN 28
+#define BSP_SPI1_D1_PIN 26
 #define BSP_SPI1_USING_SS0
-#define BSP_SPI1_SS0_PIN 32
-/* BSP_SPI1_USING_SS1 is not set */
-/* BSP_SPI1_USING_SS2 is not set */
-/* BSP_SPI1_USING_SS3 is not set */
+#define BSP_SPI1_SS0_PIN 29
 #define BSP_USING_LCD
-#define BSP_LCD_CS_PIN 6
-#define BSP_LCD_WR_PIN 7
-#define BSP_LCD_DC_PIN 8
+#define BSP_LCD_CS_PIN 36
+#define BSP_LCD_WR_PIN 39
+#define BSP_LCD_DC_PIN 38
 #define BSP_LCD_X_MAX 240
 #define BSP_LCD_Y_MAX 320
 #define BSP_USING_CAMERA