[ci][stm32f407-spark] add attach config CI check (#8431)

.github/workflows/bsp_buildings.yml

@@ -125,6 +125,7 @@ jobs:
                 - "stm32/stm32f407-atk-explorer"
                 - "stm32/stm32f407-robomaster-c"
                 - "stm32/stm32f407-st-discovery"
+                - "stm32/stm32f407-rt-spark"
                 - "stm32/stm32f410-st-nucleo"
                 - "stm32/stm32f411-atk-nano"
                 - "stm32/stm32f411-st-nucleo"

bsp/stm32/stm32f407-rt-spark/.ci/attachconfig/aht21.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_AHT21=y

bsp/stm32/stm32f407-rt-spark/.ci/attachconfig/ap3216c.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_AP3216C=y

bsp/stm32/stm32f407-rt-spark/.ci/attachconfig/ethernet_28j60.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_ENC28j60=y

bsp/stm32/stm32f407-rt-spark/.ci/attachconfig/fal_easyflash.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_EASYFLASH=y

bsp/stm32/stm32f407-rt-spark/.ci/attachconfig/filesystem.attach

@@ -0,0 +1,2 @@
+CONFIG_BSP_USING_FS=y
+CONFIG_BSP_USING_FLASH_FATFS=y

bsp/stm32/stm32f407-rt-spark/.ci/attachconfig/icm20608.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_ICM20608=y

bsp/stm32/stm32f407-rt-spark/.ci/attachconfig/lcd_st7787.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_ONBOARD_LCD=y

bsp/stm32/stm32f407-rt-spark/.ci/attachconfig/led_matrix.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_ONBOARD_LED_MATRIX=y

bsp/stm32/stm32f407-rt-spark/.ci/attachconfig/lvgl.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_LVGL=y

bsp/stm32/stm32f407-rt-spark/.ci/attachconfig/rs485.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_RS485=y

bsp/stm32/stm32f407-rt-spark/.ci/attachconfig/rw007.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_RW007_WLAN=y

bsp/stm32/stm32f407-rt-spark/.ci/attachconfig/spi_flash_w25q64.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_SPI_FLASH=y

bsp/stm32/stm32f407-rt-spark/.ci/attachconfig/sram.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_SRAM=y

bsp/stm32/stm32f407-rt-spark/.ci/attachconfig/usb_mouse.attach

@@ -0,0 +1 @@
+CONFIG_BSP_USING_USB_MOUSE=y

bsp/stm32/stm32f407-rt-spark/board/Kconfig

@@ -91,6 +91,7 @@ menu "Onboard Peripheral Drivers"
     if BSP_USING_LVGL
         config BSP_USING_LVGL_DEMO
             bool "Enable LVGL demo"
+            select PKG_LVGL_USING_DEMOS
             default y
     endif
 
@@ -150,6 +151,7 @@ menu "Onboard Peripheral Drivers"
 		select FAL_DEBUG_CONFIG
 		select FAL_PART_HAS_TABLE_CFG
 		select FAL_USING_SFUD_PORT
+        select BSP_USING_ON_CHIP_FLASH
 		
 	if BSP_USING_FAL
 		menuconfig BSP_USING_BOOTLOADER
@@ -222,12 +224,6 @@ menu "Onboard Peripheral Drivers"
         select RT_USB_DEVICE_HID_MOUSE
         select BSP_USING_ICM20608
 
-    config BSP_USING_EASYFLASH
-        bool "Enable Easy Flash base on FAL"
-        select BSP_USING_FAL
-        select PKG_USING_EASYFLASH
-        default n
-
     menuconfig BSP_USING_CAN
         bool "Enable On Board CAN"
         select RT_USING_CAN

bsp/stm32/stm32f407-rt-spark/board/ports/drv_enc28j60.c

@@ -14,12 +14,12 @@
 #include "board.h"
 
 #define PIN_NRF_IRQ             GET_PIN(E,2)
-
+#define PIN_SPI_CS              GET_PIN(A,4)
 
 int enc28j60_init(void)
 {
     __HAL_RCC_GPIOD_CLK_ENABLE();
-    rt_hw_spi_device_attach("spi1", "spi11", GPIOA, GPIO_PIN_4);
+    rt_hw_spi_device_attach("spi1", "spi11", PIN_SPI_CS);
 
     /* attach enc28j60 to spi. spi11 cs - PA4 */
     enc28j60_attach("spi11");

bsp/stm32/stm32f407-rt-spark/board/ports/led_matrix/drv_matrix_led.c

@@ -32,7 +32,7 @@
 TIM_HandleTypeDef htim3;
 DMA_HandleTypeDef hdma_tim3_ch2;
 
-ALIGN(4)
+rt_align(4)
 uint8_t led_buffer[LED_NUM * 24 * 2];
 
 extern void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);