[bsp][Infineon]Fix drv_gpio and spi problem

bsp/Infineon/libraries/HAL_Drivers/drv_gpio.c

@@ -19,6 +19,8 @@
 
 #define PIN_IFXPORT_MAX     __IFX_PORT_MAX
 
+static cyhal_gpio_callback_data_t irq_cb_data[PIN_IFXPORT_MAX];
+
 static const struct pin_irq_map pin_irq_map[] =
 {
     {CYHAL_PORT_0,  ioss_interrupts_gpio_0_IRQn},
@@ -66,6 +68,8 @@ static struct rt_pin_irq_hdr pin_irq_handler_tab[] =
 
 rt_inline void pin_irq_handler(int irqno)
 {
+    Cy_GPIO_ClearInterrupt(CYHAL_GET_PORTADDR(irqno), CYHAL_GET_PIN(irqno));
+
     if (pin_irq_handler_tab[irqno].hdr)
     {
         pin_irq_handler_tab[irqno].hdr(pin_irq_handler_tab[irqno].args);
@@ -93,8 +97,6 @@ static void irq_callback(void *callback_arg, cyhal_gpio_event_t event)
     rt_interrupt_leave();
 }
 
-cyhal_gpio_callback_data_t irq_cb_data;
-
 static void ifx_pin_mode(rt_device_t dev, rt_base_t pin, rt_uint8_t mode)
 {
     rt_uint16_t gpio_pin;
@@ -247,7 +249,6 @@ static rt_err_t ifx_pin_irq_enable(struct rt_device *device, rt_base_t pin,
     rt_uint16_t gpio_pin;
     rt_base_t level;
     rt_uint8_t pin_irq_mode;
-
     const struct pin_irq_map *irqmap;
 
     if (PORT_GET(pin) < PIN_IFXPORT_MAX)
@@ -272,10 +273,13 @@ static rt_err_t ifx_pin_irq_enable(struct rt_device *device, rt_base_t pin,
 
         irqmap = &pin_irq_map[gpio_port];
 
-        irq_cb_data.callback = irq_callback;
-        irq_cb_data.callback_arg = (rt_uint16_t *)&pin_irq_map[gpio_port].port;
+#if !defined(COMPONENT_CAT1C)
+        IRQn_Type irqn = (IRQn_Type)(irqmap->irqno + PORT_GET(irqmap->port));
+#endif
+        irq_cb_data[irqn].callback = irq_callback;
+        irq_cb_data[irqn].callback_arg = (rt_uint16_t *)&pin_irq_map[gpio_port].port;
 
-        cyhal_gpio_register_callback(gpio_pin, &irq_cb_data);
+        cyhal_gpio_register_callback(gpio_pin, &irq_cb_data[irqn]);
 
         Cy_GPIO_ClearInterrupt(CYHAL_GET_PORTADDR(gpio_pin), CYHAL_GET_PIN(gpio_pin));
 

bsp/Infineon/libraries/HAL_Drivers/drv_spi.c

@@ -93,30 +93,35 @@ static void ifx_spi_init(struct ifx_spi *spi_device)
 
     rt_err_t result = RT_EOK;
 
-    result = cyhal_spi_init(spi_device->spi_handle_t->spi_obj, spi_device->spi_handle_t->mosi_pin, spi_device->spi_handle_t->miso_pin,
-                            spi_device->spi_handle_t->sck_pin, NC, NULL, spi_device->spi_handle_t->spi_obj->data_bits,
-                            spi_device->spi_handle_t->spi_obj->mode, false);
+    static uint8_t init_flag = 1;
 
-    if (result != RT_EOK)
+    if (init_flag)
     {
-        LOG_E("spi%s init fail", spi_device->spi_handle_t->bus_name);
-        return;
-    }
+        result = cyhal_spi_init(spi_device->spi_handle_t->spi_obj, spi_device->spi_handle_t->mosi_pin, spi_device->spi_handle_t->miso_pin,
+                                spi_device->spi_handle_t->sck_pin, NC, NULL, spi_device->spi_handle_t->spi_obj->data_bits,
+                                spi_device->spi_handle_t->spi_obj->mode, false);
+        if (result != RT_EOK)
+        {
+            LOG_E("spi%s init fail", spi_device->spi_handle_t->bus_name);
+            return;
+        }
 
-    LOG_I("[%s] freq:[%d]HZ\n", spi_device->spi_handle_t->bus_name, spi_device->spi_handle_t->freq);
+        result = cyhal_spi_set_frequency(spi_device->spi_handle_t->spi_obj, spi_device->spi_handle_t->freq);
+        if (result == CYHAL_SPI_RSLT_CLOCK_ERROR)
+        {
+            LOG_E("%s set frequency fail", spi_device->spi_handle_t->bus_name);
+            return;
+        }
+        LOG_I("[%s] freq:[%d]HZ\n", spi_device->spi_handle_t->bus_name, spi_device->spi_handle_t->freq);
 
-    result = cyhal_spi_set_frequency(spi_device->spi_handle_t->spi_obj, spi_device->spi_handle_t->freq);
-    if (result == CYHAL_SPI_RSLT_CLOCK_ERROR)
-    {
-        LOG_E("%s set frequency fail", spi_device->spi_handle_t->bus_name);
-        return;
-    }
+        /* Register a callback function to be called when the interrupt fires */
+        cyhal_spi_register_callback(spi_device->spi_handle_t->spi_obj, spi_interrupt_callback, spi_device);
 
-    /* Register a callback function to be called when the interrupt fires */
-    cyhal_spi_register_callback(spi_device->spi_handle_t->spi_obj, spi_interrupt_callback, spi_device);
+        /* Enable the events that will trigger the call back function */
+        cyhal_spi_enable_event(spi_device->spi_handle_t->spi_obj, CYHAL_SPI_IRQ_DONE, 4, true);
+    }
 
-    /* Enable the events that will trigger the call back function */
-    cyhal_spi_enable_event(spi_device->spi_handle_t->spi_obj, CYHAL_SPI_IRQ_DONE, 4, true);
+    init_flag = 0;
 }
 
 static rt_err_t spi_configure(struct rt_spi_device *device,

bsp/Infineon/psoc6-evaluationkit-062S2/board/Kconfig

@@ -14,84 +14,6 @@ menu "Onboard Peripheral Drivers"
         select BSP_USING_UART
         select BSP_USING_UART6
         default y
-
-    menuconfig BSP_USING_SDMMC
-        bool "Enable SDMMC (sd card)"
-        default n
-        select RT_USING_DFS
-        select RT_USING_DFS_ELMFAT
-        if BSP_USING_SDMMC
-            menuconfig BSP_USING_SDCARD
-                bool "Enable SDCARD (sd card)"
-                select BSP_USING_SDCARD_PIN_CONFIG
-                default n
-                if BSP_USING_SDCARD
-                    config BSP_USING_SDCARD_EMMC_ENANBLE
-                        bool "Enable SDCARD emmc"
-                        default false
-                    config BSP_USING_SDCARD_BUS_WIDTH
-                        int "Enable SDCARD bus width"
-                        default 4
-                    config BSP_USING_SDCARD_LED_CTRL_ENANBLE
-                        bool "Enable SDCARD led control"
-                        default false
-                menuconfig BSP_USING_SDCARD_PIN_CONFIG
-                    bool "Enable SDCARD pin config"
-                    default y
-                    if BSP_USING_SDCARD_PIN_CONFIG
-                        config BSP_USING_SDCARD_CMD_PIN
-                            int "Enable SDCARD cmd pin,default:P2_4 --> 20"
-                            default 20
-                        config BSP_USING_SDCARD_CLK_PIN
-                            int "Enable SDCARD clk pin,default:P2_5 --> 21"
-                            default 21
-                        config BSP_USING_SDCARD_DAT0_PIN
-                            int "Enable SDCARD dat0 pin,default:P2_0 --> 16"
-                            default 16
-                        config BSP_USING_SDCARD_DAT1_PIN
-                            int "Enable SDCARD dat1 pin,default:P2_1 --> 17"
-                            default 17
-                        config BSP_USING_SDCARD_DAT2_PIN
-                            int "Enable SDCARD dat2 pin,default:P2_2 --> 18"
-                            default 18
-                        config BSP_USING_SDCARD_DAT3_PIN
-                            int "Enable SDCARD dat3 pin,default:P2_3 --> 19"
-                            default 19
-                        config BSP_USING_SDCARD_DAT4_PIN
-                            int "Enable SDCARD dat4 pin,default:NC"
-                            default -1
-                        config BSP_USING_SDCARD_DAT5_PIN
-                            int "Enable SDCARD dat5 pin,default:NC"
-                            default -1
-                        config BSP_USING_SDCARD_DAT6_PIN
-                            int "Enable SDCARD dat6 pin,default:NC"
-                            default -1
-                        config BSP_USING_SDCARD_DAT7_PIN
-                            int "Enable SDCARD dat7 pin,default:NC"
-                            default -1
-                        config BSP_USING_SDCARD_DETECT_PIN
-                            int "Enable SDCARD detect pin,default:P2_6 --> 22"
-                            default 22
-                        config BSP_USING_SDCARD_IO_VOLT_SEL_PIN
-                            int "Enable SDCARD io volt sel pin,default:NC"
-                            default -1
-                        config BSP_USING_SDCARD_CARD_IF_PWR_EN_PIN
-                            int "Enable SDCARD card if pwr en pin,default:NC"
-                            default -1
-                        config BSP_USING_SDCARD_CARD_MECH_WRITE_PROT_PIN
-                            int "Enable SDCARD card mech write prot pin,default:NC"
-                            default -1
-                        if BSP_USING_SDCARD_LED_CTRL_ENANBLE
-                            config BSP_USING_SDCARD_LED_CTRL_PIN
-                                int "Enable SDCARD led ctrl pin,default:NC"
-                                default -1
-                        endif
-                        config BSP_USING_SDCARD_CARD_EMMC_RESET_PIN
-                            int "Enable SDCARD card emmc reset pin,default:NC"
-                            default -1
-                    endif
-                endif
-        endif
 endmenu
 
 menu "On-chip Peripheral Drivers"
@@ -213,18 +135,6 @@ menu "On-chip Peripheral Drivers"
                 default n
         endif
 
-    config BSP_USING_SDMMC
-        bool "Enable SDMMC (sd card)"
-        default n
-        select RT_USING_SDIO
-        select RT_USING_DFS
-        select RT_USING_DFS_ELMFAT
-        if BSP_USING_SDMMC
-            config BSP_USING_SDIO1
-                bool "Enable SDIO1 (sd card)"
-                default n
-        endif
-
     menuconfig BSP_USING_HW_I2C
         bool "Enable Hardware I2C Bus"
         default n
@@ -336,6 +246,95 @@ menu "On-chip Peripheral Drivers"
                 default n
         endif
 
+    menuconfig BSP_USING_SDMMC
+        bool "Enable SDMMC (sd card)"
+        default n
+        select RT_USING_DFS
+        select RT_USING_DFS_ELMFAT
+        if BSP_USING_SDMMC
+            menuconfig BSP_USING_SDCARD
+                bool "Enable SDCARD (sd card)"
+                select BSP_USING_SDCARD_PIN_CONFIG
+                default n
+                if BSP_USING_SDCARD
+                    config BSP_USING_SDCARD_EMMC_ENANBLE
+                        bool "Enable SDCARD emmc"
+                        default false
+                    config BSP_USING_SDCARD_BUS_WIDTH
+                        int "Enable SDCARD bus width"
+                        default 4
+                    config BSP_USING_SDCARD_LED_CTRL_ENANBLE
+                        bool "Enable SDCARD led control"
+                        default false
+                menuconfig BSP_USING_SDCARD_PIN_CONFIG
+                    bool "Enable SDCARD pin config"
+                    default y
+                    if BSP_USING_SDCARD_PIN_CONFIG
+                        config BSP_USING_SDCARD_CMD_PIN
+                            int "Enable SDCARD cmd pin,default:P2_4 --> 20"
+                            default 20
+                        config BSP_USING_SDCARD_CLK_PIN
+                            int "Enable SDCARD clk pin,default:P2_5 --> 21"
+                            default 21
+                        config BSP_USING_SDCARD_DAT0_PIN
+                            int "Enable SDCARD dat0 pin,default:P2_0 --> 16"
+                            default 16
+                        config BSP_USING_SDCARD_DAT1_PIN
+                            int "Enable SDCARD dat1 pin,default:P2_1 --> 17"
+                            default 17
+                        config BSP_USING_SDCARD_DAT2_PIN
+                            int "Enable SDCARD dat2 pin,default:P2_2 --> 18"
+                            default 18
+                        config BSP_USING_SDCARD_DAT3_PIN
+                            int "Enable SDCARD dat3 pin,default:P2_3 --> 19"
+                            default 19
+                        config BSP_USING_SDCARD_DAT4_PIN
+                            int "Enable SDCARD dat4 pin,default:NC"
+                            default -1
+                        config BSP_USING_SDCARD_DAT5_PIN
+                            int "Enable SDCARD dat5 pin,default:NC"
+                            default -1
+                        config BSP_USING_SDCARD_DAT6_PIN
+                            int "Enable SDCARD dat6 pin,default:NC"
+                            default -1
+                        config BSP_USING_SDCARD_DAT7_PIN
+                            int "Enable SDCARD dat7 pin,default:NC"
+                            default -1
+                        config BSP_USING_SDCARD_DETECT_PIN
+                            int "Enable SDCARD detect pin,default:P2_6 --> 22"
+                            default 22
+                        config BSP_USING_SDCARD_IO_VOLT_SEL_PIN
+                            int "Enable SDCARD io volt sel pin,default:NC"
+                            default -1
+                        config BSP_USING_SDCARD_CARD_IF_PWR_EN_PIN
+                            int "Enable SDCARD card if pwr en pin,default:NC"
+                            default -1
+                        config BSP_USING_SDCARD_CARD_MECH_WRITE_PROT_PIN
+                            int "Enable SDCARD card mech write prot pin,default:NC"
+                            default -1
+                        if BSP_USING_SDCARD_LED_CTRL_ENANBLE
+                            config BSP_USING_SDCARD_LED_CTRL_PIN
+                                int "Enable SDCARD led ctrl pin,default:NC"
+                                default -1
+                        endif
+                        config BSP_USING_SDCARD_CARD_EMMC_RESET_PIN
+                            int "Enable SDCARD card emmc reset pin,default:NC"
+                            default -1
+                    endif
+                endif
+        endif
+
+    menuconfig BSP_USING_FS
+        bool "Enable filesystem"
+        default n
+        if BSP_USING_FS
+            config BSP_USING_SDCARD_FS
+                bool "Enable SDCARD filesystem"
+                select BSP_USING_SDHI
+                select RT_USING_DFS_ELMFAT
+                default n
+        endif
+
     menuconfig BSP_USING_LVGL
         bool "Enable LVGL for LCD"
         select PKG_USING_LVGL