[bsp] Add IAR EWARM project template for SCONS project auto generation.

bsp/tm4c129x/applications/board.c

@@ -61,6 +61,7 @@ extern void HardFault_Handler(void);
  */
 void rt_hw_board_init()
 {
+  MAP_IntMasterDisable();
     IntRegister(FAULT_HARD, HardFault_Handler);	
     IntRegister(FAULT_PENDSV, PendSV_Handler);
     IntRegister(FAULT_SYSTICK, SysTick_Handler);
@@ -87,7 +88,7 @@ void rt_hw_board_init()
     MAP_SysTickEnable();	
 
     /* set pend exception priority */
-    IntPrioritySet(FAULT_PENDSV, (1 << 5) - 1);
+    //IntPrioritySet(FAULT_PENDSV, (1 << 5) - 1);
     
     /*init uart device*/		
     rt_hw_uart_init();

bsp/tm4c129x/drivers/drv_uart.c

@@ -36,7 +36,7 @@ typedef struct hw_uart_device
 
 static rt_err_t hw_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
 {	
-	uint32_t config;
+	uint32_t config = 0;
 	hw_uart_t* uart;
     RT_ASSERT(serial != RT_NULL);
     uart = mUartGetHwPtr(serial);
@@ -206,7 +206,7 @@ int rt_hw_uart_init(void)
     MAP_SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0);
 
     /* preemption = 1, sub-priority = 1 */
-    IntPrioritySet(INT_UART0, ((0x01 << 5) | 0x01));
+    //IntPrioritySet(INT_UART0, ((0x01 << 5) | 0x01));
 
     /* Enable Interrupt for UART channel */
 	  UARTIntRegister(uart->hw_base, UART0_IRQHandler);

bsp/tm4c129x/libraries/startup/startup_ewarm.c

@@ -50,7 +50,10 @@ static void IntDefaultHandler(void);
 //
 //*****************************************************************************
 extern void __iar_program_start(void);
-
+extern void PendSV_Handler(void);
+extern void SysTick_Handler(void);
+extern void UART0_IRQHandler(void);
+extern void HardFault_Handler(void);
 //*****************************************************************************
 //
 // Reserve space for the system stack.
@@ -84,7 +87,7 @@ __root const uVectorEntry __vector_table[] @ ".intvec" =
                                             // The initial stack pointer
     ResetISR,                               // The reset handler
     NmiSR,                                  // The NMI handler
-    FaultISR,                               // The hard fault handler
+    HardFault_Handler,                               // The hard fault handler
     IntDefaultHandler,                      // The MPU fault handler
     IntDefaultHandler,                      // The bus fault handler
     IntDefaultHandler,                      // The usage fault handler
@@ -95,14 +98,14 @@ __root const uVectorEntry __vector_table[] @ ".intvec" =
     IntDefaultHandler,                      // SVCall handler
     IntDefaultHandler,                      // Debug monitor handler
     0,                                      // Reserved
-    IntDefaultHandler,                      // The PendSV handler
-    IntDefaultHandler,                      // The SysTick handler
+    PendSV_Handler, //IntDefaultHandler,                      // The PendSV handler
+    SysTick_Handler,//IntDefaultHandler,                      // The SysTick handler
     IntDefaultHandler,                      // GPIO Port A
     IntDefaultHandler,                      // GPIO Port B
     IntDefaultHandler,                      // GPIO Port C
     IntDefaultHandler,                      // GPIO Port D
     IntDefaultHandler,                      // GPIO Port E
-    IntDefaultHandler,                      // UART0 Rx and Tx
+    UART0_IRQHandler, //IntDefaultHandler,                      // UART0 Rx and Tx
     IntDefaultHandler,                      // UART1 Rx and Tx
     IntDefaultHandler,                      // SSI0 Rx and Tx
     IntDefaultHandler,                      // I2C0 Master and Slave

bsp/tm4c129x/libraries/startup/startup_gcc.c

@@ -45,6 +45,8 @@ extern int main(void);
 
 extern void SysTick_Handler(void);
 extern void PendSV_Handler(void);
+extern void UART0_IRQHandler(void);
+extern void HardFault_Handler(void);
 //*****************************************************************************
 //
 // Reserve space for the system stack.
@@ -65,7 +67,7 @@ void (* const g_pfnVectors[])(void) =
                                             // The initial stack pointer
     ResetISR,                               // The reset handler
     NmiSR,                                  // The NMI handler
-    FaultISR,                               // The hard fault handler
+    HardFault_Handler,                      // The hard fault handler
     IntDefaultHandler,                      // The MPU fault handler
     IntDefaultHandler,                      // The bus fault handler
     IntDefaultHandler,                      // The usage fault handler
@@ -83,7 +85,7 @@ void (* const g_pfnVectors[])(void) =
     IntDefaultHandler,                      // GPIO Port C
     IntDefaultHandler,                      // GPIO Port D
     IntDefaultHandler,                      // GPIO Port E
-    IntDefaultHandler,                      // UART0 Rx and Tx
+    UART0_IRQHandler,                      // UART0 Rx and Tx
     IntDefaultHandler,                      // UART1 Rx and Tx
     IntDefaultHandler,                      // SSI0 Rx and Tx
     IntDefaultHandler,                      // I2C0 Master and Slave

bsp/tm4c129x/template.ewp

@@ -0,0 +1,1889 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>
+  <configuration>
+    <name>Debug</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>1</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>ExePath</name>
+          <state>build\Exe</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>build\Obj</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>build\List</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>40</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>Automatic choice of formatter.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>Automatic choice of formatter.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>5</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>7.20.1.7306</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.20.1.7306</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>TM4C1294NCPDT	TexasInstruments TM4C1294NCPDT</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>40</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>40</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>CCDefines</name>
+          <state>ewarm</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state>Pa050</state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>00000000</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ADefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>2</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>rtthread.bin</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>rtthread.out</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+          <state>tm4c_rom.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>
+  <configuration>
+    <name>Release</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>22</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>Release\Exe</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>Release\Obj</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>Release\List</state>
+        </option>
+        <option>
+          <name>Variant</name>
+          <version>20</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state></state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state></state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FPU</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>7.20.1.7306</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state></state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state></state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave</name>
+          <version>20</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>20</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCDefines</name>
+          <state>NDEBUG</state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ADefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>2</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>###Unitialized###</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+          <state>lnk0t.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state></state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>
+</project>
+
+

bsp/tm4c129x/template.eww

@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>
+  <project>
+    <path>$WS_DIR$\template.ewp</path>
+  </project>
+  <batchBuild/>
+</workspace>
+
+

bsp/tm4c129x/tm4c_rom.icf

@@ -76,3 +76,5 @@ place at start of SRAM { section VTABLE };
 // Place all read/write items into SRAM.
 //
 place in SRAM { readwrite, block HEAP };
+keep { section FSymTab };
+keep { section VSymTab };