[rx] mannual formatted

bsp/rx/applications/startup.c

@@ -90,7 +90,7 @@ int main(void)
 {
 
   rt_hw_system_freq_init();
-   
+
   __enable_interrupt();
     /* disable interrupt first */
     rt_hw_interrupt_disable();

bsp/rx/drivers/board.c

@@ -17,7 +17,7 @@
  *
  */
 #pragma vector = VECT_CMT0_CMI0
-__interrupt 
+__interrupt
 void SysTick_Handler(void)
 {
    // __enable_interrupt();
@@ -56,7 +56,7 @@ void  rt_hw_systick_init(void)
 }
 
 void rt_hw_system_freq_init(void)
-{ 
+{
    /* Declare error flag */
   bool err = true;
 
@@ -69,15 +69,15 @@ void rt_hw_system_freq_init(void)
     24E6,
     PDL_NO_DATA
     );
-  /* 
+  /*
   Clock Description              Frequency
   ----------------------------------------
   Input Clock Frequency..............12MHz
-  Internal Clock Frequency...........96MHz    
+  Internal Clock Frequency...........96MHz
   Peripheral Clock Frequency.........48MHz
   External Bus Clock Frequency.......24MHz */
 
-  /* Halt in while loop when RPDL errors detected */    
+  /* Halt in while loop when RPDL errors detected */
   while (!err);
 }
 
@@ -86,8 +86,8 @@ void rt_hw_system_freq_init(void)
  */
 void rt_hw_board_init()
 {
-    
-    rt_hw_system_freq_init();               
+
+    rt_hw_system_freq_init();
     rt_hw_systick_init();
     rt_hw_uart_init();
 #ifdef RT_USING_CONSOLE

bsp/rx/drivers/board.h

@@ -2,10 +2,10 @@
 #define __BOARD_H__
 
 
-#define		XTAL_FREQUENCY (12000000L)
-#define		ICLK_MUL (8)
-#define		PCLK_MUL (4)
-#define		BCLK_MUL (2)
+#define     XTAL_FREQUENCY (12000000L)
+#define     ICLK_MUL (8)
+#define     PCLK_MUL (4)
+#define     BCLK_MUL (2)
 
 #define RX62N_SRAM_END 0x0000ffff
 

bsp/rx/drivers/uart.c

@@ -22,18 +22,18 @@
 
 
                           /* Clock selection control */
-#define SCI_CKS_MIN		0
-#define SCI_CKS_MAX		3
-#define SCI_CKS_STEP	1
+#define SCI_CKS_MIN     0
+#define SCI_CKS_MAX     3
+#define SCI_CKS_STEP    1
 
 
-#define	IPR_ADDRESS(a) ((volatile unsigned char *)&ICU.IPR[IPR_SCI0_ + a])
+#define IPR_ADDRESS(a) ((volatile unsigned char *)&ICU.IPR[IPR_SCI0_ + a])
 //#define IER_ADDRESS(a) ((volatile unsigned char *)&(ICU.IER[IER_SCI0_ERI0 + a])/sizeof(unsigned char))
-#define	ERI_ADDRESS(a) ((volatile unsigned char *)&ICU.IR[IR_SCI0_ERI0] + ((4 * a) / sizeof(unsigned char)) )
-#define	IER_ADDRESS(a) ((volatile unsigned char *)&ICU.IER[IER_SCI0_ERI0] + ((4 * a) / sizeof(unsigned char)) )
-#define	RXI_ADDRESS(a) ((volatile unsigned char *)&ICU.IR[IR_SCI0_RXI0] + ((4 * a) / sizeof(unsigned char)) )
-#define	TXI_ADDRESS(a) ((volatile unsigned char *)&ICU.IR[IR_SCI0_TXI0] + ((4 * a) / sizeof(unsigned char)) )
-#define	TEI_ADDRESS(a) ((volatile unsigned char *)&ICU.IR[IR_SCI0_TEI0] + ((4 * a) / sizeof(unsigned char)) )
+#define ERI_ADDRESS(a) ((volatile unsigned char *)&ICU.IR[IR_SCI0_ERI0] + ((4 * a) / sizeof(unsigned char)) )
+#define IER_ADDRESS(a) ((volatile unsigned char *)&ICU.IER[IER_SCI0_ERI0] + ((4 * a) / sizeof(unsigned char)) )
+#define RXI_ADDRESS(a) ((volatile unsigned char *)&ICU.IR[IR_SCI0_RXI0] + ((4 * a) / sizeof(unsigned char)) )
+#define TXI_ADDRESS(a) ((volatile unsigned char *)&ICU.IR[IR_SCI0_TXI0] + ((4 * a) / sizeof(unsigned char)) )
+#define TEI_ADDRESS(a) ((volatile unsigned char *)&ICU.IR[IR_SCI0_TEI0] + ((4 * a) / sizeof(unsigned char)) )
 #define  RXI_DTCER_ADDRESS(a) (( volatile unsigned char *)&ICU.DTCER[IR_SCI0_RXI0]+ ((4*a)/sizeof(unsigned char)))
 #define  TXI_DTCER_ADDRESS(a) (( volatile unsigned char *)&ICU.DTCER[IR_SCI0_TXI0]+ ((4*a) / sizeof(unsigned char)))
 //#define SCI1_USE_B
@@ -44,8 +44,8 @@
 #define SourceClk 12000000
 #define rpdl_CGC_f_pclk SourceClk * 4
 /* Idle output options */
-#define SPACE	0
-#define MARK	1
+#define SPACE   0
+#define MARK    1
 
 typedef int UART_ID_Type;
 typedef int IRQn_Type;
@@ -55,14 +55,14 @@ typedef int IRQn_Type;
 struct rx_uart
 {
     UART_ID_Type UART;
-    volatile struct st_sci __sfr * sci;    
+    volatile struct st_sci __sfr * sci;
 };
 
 static rt_err_t rx_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
 {
     #if 1
     struct rx_uart *uart;
-    
+
     unsigned char smr_copy;
     unsigned char semr_copy;
     unsigned char scr_copy;
@@ -81,7 +81,7 @@ static rt_err_t rx_configure(struct rt_serial_device *serial, struct serial_conf
     semr_copy = 0x00u;
     scmr_copy = 0x72u;
     brr_divider = 0;
-    
+
     switch (uart->UART) {
 case 0:
         SYSTEM.MSTPCRB.BIT.MSTPB31 = 0;
@@ -257,11 +257,11 @@ case 0:
     }
 
     /*parity*/
-    if (cfg->parity == PARITY_ODD) 
+    if (cfg->parity == PARITY_ODD)
         smr_copy |= BIT_5;
-        else if (cfg->parity == PARITY_EVEN) 
+        else if (cfg->parity == PARITY_EVEN)
             smr_copy |= BIT_4 | BIT_5;
-    
+
 
 
     brr_divider = rpdl_CGC_f_pclk / cfg->baud_rate;
@@ -304,13 +304,13 @@ case 0:
     }while (bit_interval_counter != 0);
 
     scr_copy = 0x00u;
-	
+
     /*enable rx an tx*/
     scr_copy |= BIT_5  | BIT_4 ;
 
     uart->sci->SCR.BYTE &= 0x5B;
     uart->sci->SCR.BYTE |= scr_copy;
-                             
+
     *(IPR_ADDRESS(uart->UART)) = 5;
     uart->sci->SSR.BYTE = 0xC0;
     uart->sci->SSR.BYTE &= INV_BIT_5;
@@ -363,9 +363,9 @@ case 0:
           break;
   }
 
-  flag |= PDL_SCI_ASYNC | 
-      PDL_SCI_TX_CONNECTED | 
-      PDL_SCI_RX_CONNECTED | 
+  flag |= PDL_SCI_ASYNC |
+      PDL_SCI_TX_CONNECTED |
+      PDL_SCI_RX_CONNECTED |
       PDL_SCI_CLK_INT_IO ;
   /* Configure the RS232 port */
   err &=    R_SCI_Create(
@@ -373,12 +373,12 @@ case 0:
     flag,
     cfg->baud_rate,
     5);
-                  
+
   uart->sci->SCR.BYTE |= BIT_4|BIT_5;
 
  __enable_interrupt();
     #endif
-                          
+
     switch (uart->UART) {
     case 0:
 
@@ -430,7 +430,7 @@ case 0:
 
         break;
     }
-    
+
     return RT_EOK;
 }
 
@@ -464,7 +464,7 @@ static int rx_putc(struct rt_serial_device *serial, char c)
     uart = (struct rx_uart *)serial->parent.user_data;
     while (uart->sci->SSR.BIT.TDRE == 0);
     uart->sci->TDR = c;
-    return 1; 
+    return 1;
 }
 
 static int rx_getc(struct rt_serial_device *serial)
@@ -528,15 +528,15 @@ void rt_hw_uart_init(void)
     config.parity    = PARITY_NONE;
     config.stop_bits = STOP_BITS_1;
     config.invert    = NRZ_NORMAL;
-	config.bufsz     = RT_SERIAL_RB_BUFSZ;
+    config.bufsz     = RT_SERIAL_RB_BUFSZ;
 
     serial2.ops    = &rx_uart_ops;
     serial2.config = config;
 
     /* register UART1 device */
     rt_hw_serial_register(&serial2, "uart2",
-                          RT_DEVICE_FLAG_RDWR | 
-                          RT_DEVICE_FLAG_INT_RX | 
+                          RT_DEVICE_FLAG_RDWR |
+                          RT_DEVICE_FLAG_INT_RX |
                           RT_DEVICE_FLAG_STREAM,
                           uart);
 #endif

bsp/rx/rtconfig.h

@@ -3,16 +3,16 @@
 #define __RTTHREAD_CFG_H__
 
 /* RT_NAME_MAX*/
-#define RT_NAME_MAX	8
+#define RT_NAME_MAX 8
 
 /* RT_ALIGN_SIZE*/
-#define RT_ALIGN_SIZE	4
+#define RT_ALIGN_SIZE   4
 
 /* PRIORITY_MAX */
-#define RT_THREAD_PRIORITY_MAX	32
+#define RT_THREAD_PRIORITY_MAX  32
 
 /* Tick per Second */
-#define RT_TICK_PER_SECOND	100
+#define RT_TICK_PER_SECOND  100
 
 /* SECTION: RT_DEBUG */
 /* Thread Debug */
@@ -27,9 +27,9 @@
 
 /* Using Software Timer */
 /* #define RT_USING_TIMER_SOFT */
-#define RT_TIMER_THREAD_PRIO		4
-#define RT_TIMER_THREAD_STACK_SIZE	512
-#define RT_TIMER_TICK_PER_SECOND	10
+#define RT_TIMER_THREAD_PRIO        4
+#define RT_TIMER_THREAD_STACK_SIZE  512
+#define RT_TIMER_TICK_PER_SECOND    10
 
 /* SECTION: IPC */
 /* Using Semaphore*/
@@ -72,9 +72,9 @@
 /* SECTION: Console options */
 #define RT_USING_CONSOLE
 /* the buffer size of console*/
-#define RT_CONSOLEBUF_SIZE	        128
+#define RT_CONSOLEBUF_SIZE          128
 // <string name="RT_CONSOLE_DEVICE_NAME" description="The device name for console" default="uart1" />
-#define RT_CONSOLE_DEVICE_NAME	    "uart2"
+#define RT_CONSOLE_DEVICE_NAME      "uart2"
 
 /* SECTION: finsh, a C-Express shell */
 #define RT_USING_FINSH
@@ -89,17 +89,17 @@
 /* Reentrancy (thread safe) of the FatFs module.  */
 #define RT_DFS_ELM_REENTRANT
 /* Number of volumes (logical drives) to be used. */
-#define RT_DFS_ELM_DRIVES			2
-/* #define RT_DFS_ELM_USE_LFN			1 */
-/* #define RT_DFS_ELM_CODE_PAGE			936 */
-#define RT_DFS_ELM_MAX_LFN			255
+#define RT_DFS_ELM_DRIVES           2
+/* #define RT_DFS_ELM_USE_LFN           1 */
+/* #define RT_DFS_ELM_CODE_PAGE         936 */
+#define RT_DFS_ELM_MAX_LFN          255
 /* Maximum sector size to be handled. */
 #define RT_DFS_ELM_MAX_SECTOR_SIZE  512
 
 /* the max number of mounted filesystem */
-#define DFS_FILESYSTEMS_MAX			2
-/* the max number of opened files 		*/
-#define DFS_FD_MAX					4
+#define DFS_FILESYSTEMS_MAX         2
+/* the max number of opened files       */
+#define DFS_FD_MAX                  4
 
 /* SECTION: lwip, a lighwight TCP/IP protocol stack */
 /* #define RT_USING_LWIP */
@@ -113,49 +113,49 @@
 #define RT_LWIP_DNS
 
 /* the number of simulatenously active TCP connections*/
-#define RT_LWIP_TCP_PCB_NUM	5
+#define RT_LWIP_TCP_PCB_NUM 5
 
 /* Using DHCP */
 /* #define RT_LWIP_DHCP */
 
 /* ip address of target*/
-#define RT_LWIP_IPADDR0	192
-#define RT_LWIP_IPADDR1	168
-#define RT_LWIP_IPADDR2	1
-#define RT_LWIP_IPADDR3	30
+#define RT_LWIP_IPADDR0 192
+#define RT_LWIP_IPADDR1 168
+#define RT_LWIP_IPADDR2 1
+#define RT_LWIP_IPADDR3 30
 
 /* gateway address of target*/
-#define RT_LWIP_GWADDR0	192
-#define RT_LWIP_GWADDR1	168
-#define RT_LWIP_GWADDR2	1
-#define RT_LWIP_GWADDR3	1
+#define RT_LWIP_GWADDR0 192
+#define RT_LWIP_GWADDR1 168
+#define RT_LWIP_GWADDR2 1
+#define RT_LWIP_GWADDR3 1
 
 /* mask address of target*/
-#define RT_LWIP_MSKADDR0	255
-#define RT_LWIP_MSKADDR1	255
-#define RT_LWIP_MSKADDR2	255
-#define RT_LWIP_MSKADDR3	0
+#define RT_LWIP_MSKADDR0    255
+#define RT_LWIP_MSKADDR1    255
+#define RT_LWIP_MSKADDR2    255
+#define RT_LWIP_MSKADDR3    0
 
 /* tcp thread options */
-#define RT_LWIP_TCPTHREAD_PRIORITY		12
-#define RT_LWIP_TCPTHREAD_MBOX_SIZE		10
-#define RT_LWIP_TCPTHREAD_STACKSIZE		1024
+#define RT_LWIP_TCPTHREAD_PRIORITY      12
+#define RT_LWIP_TCPTHREAD_MBOX_SIZE     10
+#define RT_LWIP_TCPTHREAD_STACKSIZE     1024
 
 /* ethernet if thread options */
-#define RT_LWIP_ETHTHREAD_PRIORITY		15
-#define RT_LWIP_ETHTHREAD_MBOX_SIZE		10
-#define RT_LWIP_ETHTHREAD_STACKSIZE		512
+#define RT_LWIP_ETHTHREAD_PRIORITY      15
+#define RT_LWIP_ETHTHREAD_MBOX_SIZE     10
+#define RT_LWIP_ETHTHREAD_STACKSIZE     512
 
 /* TCP sender buffer space */
-#define RT_LWIP_TCP_SND_BUF	8192
+#define RT_LWIP_TCP_SND_BUF 8192
 /* TCP receive window. */
-#define RT_LWIP_TCP_WND		8192
+#define RT_LWIP_TCP_WND     8192
 
 /* SECTION: RT-Thread/GUI */
 /* #define RT_USING_RTGUI */
 
 /* name length of RTGUI object */
-#define RTGUI_NAME_MAX		12
+#define RTGUI_NAME_MAX      12
 /* support 16 weight font */
 #define RTGUI_USING_FONT16
 /* support Chinese font */
@@ -171,7 +171,7 @@
 /* use mouse cursor */
 /* #define RTGUI_USING_MOUSE_CURSOR */
 /* default font size in RTGUI */
-#define RTGUI_DEFAULT_FONT_SIZE	16
+#define RTGUI_DEFAULT_FONT_SIZE 16
 
 /* image support */
 /* #define RTGUI_IMAGE_XPM */