|
@@ -46,41 +46,41 @@ typedef uint16_t in_port_t;
|
|
|
#define SOCK_DGRAM 2
|
|
|
#define SOCK_RAW 3
|
|
|
|
|
|
-#define SOCK_MAX (SOCK_RAW + 1)
|
|
|
+#define SOCK_MAX (SOCK_RAW + 1)
|
|
|
|
|
|
/*
|
|
|
* Option flags per-socket. These must match the SOF_ flags in ip.h (checked in init.c)
|
|
|
*/
|
|
|
-#define SO_REUSEADDR 0x0004 /* Allow local address reuse */
|
|
|
-#define SO_KEEPALIVE 0x0008 /* keep connections alive */
|
|
|
-#define SO_BROADCAST 0x0020 /* permit to send and to receive broadcast messages (see IP_SOF_BROADCAST option) */
|
|
|
+#define SO_REUSEADDR 0x0004 /* Allow local address reuse */
|
|
|
+#define SO_KEEPALIVE 0x0008 /* keep connections alive */
|
|
|
+#define SO_BROADCAST 0x0020 /* permit to send and to receive broadcast messages (see IP_SOF_BROADCAST option) */
|
|
|
|
|
|
/*
|
|
|
* Additional options, not kept in so_options.
|
|
|
*/
|
|
|
-#define SO_DEBUG 0x0001 /* Unimplemented: turn on debugging info recording */
|
|
|
-#define SO_ACCEPTCONN 0x0002 /* socket has had listen() */
|
|
|
-#define SO_DONTROUTE 0x0010 /* Unimplemented: just use interface addresses */
|
|
|
-#define SO_USELOOPBACK 0x0040 /* Unimplemented: bypass hardware when possible */
|
|
|
-#define SO_LINGER 0x0080 /* linger on close if data present */
|
|
|
-#define SO_DONTLINGER ((int)(~SO_LINGER))
|
|
|
-#define SO_OOBINLINE 0x0100 /* Unimplemented: leave received OOB data in line */
|
|
|
-#define SO_REUSEPORT 0x0200 /* Unimplemented: allow local address & port reuse */
|
|
|
-#define SO_SNDBUF 0x1001 /* Unimplemented: send buffer size */
|
|
|
-#define SO_RCVBUF 0x1002 /* receive buffer size */
|
|
|
-#define SO_SNDLOWAT 0x1003 /* Unimplemented: send low-water mark */
|
|
|
-#define SO_RCVLOWAT 0x1004 /* Unimplemented: receive low-water mark */
|
|
|
-#define SO_SNDTIMEO 0x1005 /* send timeout */
|
|
|
-#define SO_RCVTIMEO 0x1006 /* receive timeout */
|
|
|
-#define SO_ERROR 0x1007 /* get error status and clear */
|
|
|
-#define SO_TYPE 0x1008 /* get socket type */
|
|
|
-#define SO_CONTIMEO 0x1009 /* Unimplemented: connect timeout */
|
|
|
-#define SO_NO_CHECK 0x100a /* don't create UDP checksum */
|
|
|
+#define SO_DEBUG 0x0001 /* Unimplemented: turn on debugging info recording */
|
|
|
+#define SO_ACCEPTCONN 0x0002 /* socket has had listen() */
|
|
|
+#define SO_DONTROUTE 0x0010 /* Unimplemented: just use interface addresses */
|
|
|
+#define SO_USELOOPBACK 0x0040 /* Unimplemented: bypass hardware when possible */
|
|
|
+#define SO_LINGER 0x0080 /* linger on close if data present */
|
|
|
+#define SO_DONTLINGER ((int)(~SO_LINGER))
|
|
|
+#define SO_OOBINLINE 0x0100 /* Unimplemented: leave received OOB data in line */
|
|
|
+#define SO_REUSEPORT 0x0200 /* Unimplemented: allow local address & port reuse */
|
|
|
+#define SO_SNDBUF 0x1001 /* Unimplemented: send buffer size */
|
|
|
+#define SO_RCVBUF 0x1002 /* receive buffer size */
|
|
|
+#define SO_SNDLOWAT 0x1003 /* Unimplemented: send low-water mark */
|
|
|
+#define SO_RCVLOWAT 0x1004 /* Unimplemented: receive low-water mark */
|
|
|
+#define SO_SNDTIMEO 0x1005 /* send timeout */
|
|
|
+#define SO_RCVTIMEO 0x1006 /* receive timeout */
|
|
|
+#define SO_ERROR 0x1007 /* get error status and clear */
|
|
|
+#define SO_TYPE 0x1008 /* get socket type */
|
|
|
+#define SO_CONTIMEO 0x1009 /* Unimplemented: connect timeout */
|
|
|
+#define SO_NO_CHECK 0x100a /* don't create UDP checksum */
|
|
|
|
|
|
/*
|
|
|
* Level number for (get/set)sockopt() to apply to socket itself.
|
|
|
*/
|
|
|
-#define SOL_SOCKET 0xfff /* options for socket level */
|
|
|
+#define SOL_SOCKET 0xfff /* options for socket level */
|
|
|
|
|
|
#define AF_UNSPEC 0
|
|
|
#define AF_INET 2
|
|
@@ -105,44 +105,59 @@ typedef uint16_t in_port_t;
|
|
|
#define IPPROTO_RAW 255
|
|
|
|
|
|
/* Flags we can use with send and recv. */
|
|
|
-#define MSG_PEEK 0x01 /* Peeks at an incoming message */
|
|
|
-#define MSG_WAITALL 0x02 /* Unimplemented: Requests that the function block until the full amount of data requested can be returned */
|
|
|
-#define MSG_OOB 0x04 /* Unimplemented: Requests out-of-band data. The significance and semantics of out-of-band data are protocol-specific */
|
|
|
-#define MSG_DONTWAIT 0x08 /* Nonblocking i/o for this operation only */
|
|
|
-#define MSG_MORE 0x10 /* Sender will send more */
|
|
|
+#define MSG_PEEK 0x01 /* Peeks at an incoming message */
|
|
|
+#define MSG_WAITALL 0x02 /* Unimplemented: Requests that the function block until the full amount of data requested can be returned */
|
|
|
+#define MSG_OOB 0x04 /* Unimplemented: Requests out-of-band data. The significance and semantics of out-of-band data are protocol-specific */
|
|
|
+#define MSG_DONTWAIT 0x08 /* Nonblocking i/o for this operation only */
|
|
|
+#define MSG_MORE 0x10 /* Sender will send more */
|
|
|
|
|
|
/*
|
|
|
* Options for level IPPROTO_TCP
|
|
|
*/
|
|
|
-#define TCP_NODELAY 0x01 /* don't delay send to coalesce packets */
|
|
|
-#define TCP_KEEPALIVE 0x02 /* send KEEPALIVE probes when idle for pcb->keep_idle milliseconds */
|
|
|
-#define TCP_KEEPIDLE 0x03 /* set pcb->keep_idle - Same as TCP_KEEPALIVE, but use seconds for get/setsockopt */
|
|
|
-#define TCP_KEEPINTVL 0x04 /* set pcb->keep_intvl - Use seconds for get/setsockopt */
|
|
|
-#define TCP_KEEPCNT 0x05 /* set pcb->keep_cnt - Use number of probes sent for get/setsockopt */
|
|
|
-
|
|
|
-struct sockaddr {
|
|
|
- uint8_t sa_len;
|
|
|
- sa_family_t sa_family;
|
|
|
- char sa_data[14];
|
|
|
+#define TCP_NODELAY 0x01 /* don't delay send to coalesce packets */
|
|
|
+#define TCP_KEEPALIVE 0x02 /* send KEEPALIVE probes when idle for pcb->keep_idle milliseconds */
|
|
|
+#define TCP_KEEPIDLE 0x03 /* set pcb->keep_idle - Same as TCP_KEEPALIVE, but use seconds for get/setsockopt */
|
|
|
+#define TCP_KEEPINTVL 0x04 /* set pcb->keep_intvl - Use seconds for get/setsockopt */
|
|
|
+#define TCP_KEEPCNT 0x05 /* set pcb->keep_cnt - Use number of probes sent for get/setsockopt */
|
|
|
+
|
|
|
+/*
|
|
|
+ * Options and types related to multicast membership
|
|
|
+ */
|
|
|
+#define IP_ADD_MEMBERSHIP 3
|
|
|
+#define IP_DROP_MEMBERSHIP 4
|
|
|
+
|
|
|
+typedef struct ip_mreq
|
|
|
+{
|
|
|
+ struct in_addr imr_multiaddr; /* IP multicast address of group */
|
|
|
+ struct in_addr imr_interface; /* local IP address of interface */
|
|
|
+} ip_mreq;
|
|
|
+
|
|
|
+struct sockaddr
|
|
|
+{
|
|
|
+ uint8_t sa_len;
|
|
|
+ sa_family_t sa_family;
|
|
|
+ char sa_data[14];
|
|
|
};
|
|
|
|
|
|
/* members are in network byte order */
|
|
|
-struct sockaddr_in {
|
|
|
- uint8_t sin_len;
|
|
|
- sa_family_t sin_family;
|
|
|
- in_port_t sin_port;
|
|
|
- struct in_addr sin_addr;
|
|
|
+struct sockaddr_in
|
|
|
+{
|
|
|
+ uint8_t sin_len;
|
|
|
+ sa_family_t sin_family;
|
|
|
+ in_port_t sin_port;
|
|
|
+ struct in_addr sin_addr;
|
|
|
#define SIN_ZERO_LEN 8
|
|
|
- char sin_zero[SIN_ZERO_LEN];
|
|
|
+ char sin_zero[SIN_ZERO_LEN];
|
|
|
};
|
|
|
|
|
|
-struct sockaddr_storage {
|
|
|
- uint8_t s2_len;
|
|
|
- sa_family_t ss_family;
|
|
|
- char s2_data1[2];
|
|
|
- uint32_t s2_data2[3];
|
|
|
+struct sockaddr_storage
|
|
|
+{
|
|
|
+ uint8_t s2_len;
|
|
|
+ sa_family_t ss_family;
|
|
|
+ char s2_data1[2];
|
|
|
+ uint32_t s2_data2[3];
|
|
|
#if SAL_IPV6
|
|
|
- u32_t s2_data3[3];
|
|
|
+ u32_t s2_data3[3];
|
|
|
#endif /* SAL_IPV6 */
|
|
|
};
|
|
|
|