add eth driver for STM32 CL

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@71 bbd45198-f89e-11dd-88c7-29a3b14d5316

bsp/stm3210/eth_cl.c

@@ -0,0 +1,218 @@
+/*
+ * File      : eth_cl.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006 - 2009, RT-Thread Development Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rt-thread.org/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2009-10-05     Bernard      eth interface driver for STM32F107 CL
+ */
+
+#include <rtthread.h>
+#include "Libraries/STM32_ETH_Driver/inc/stm32_eth.h"
+
+#include <netif/ethernetif.h>
+#include "lwipopts.h"
+
+#define DP83848_PHY        /* Ethernet pins mapped on STM3210C-EVAL Board */
+#define PHY_ADDRESS       0x01 /* Relative to STM3210C-EVAL Board */
+
+#define ETH_RXBUFNB        8
+#define ETH_TXBUFNB        2
+ETH_InitTypeDef ETH_InitStructure;
+ETH_DMADESCTypeDef  DMARxDscrTab[ETH_RXBUFNB], DMATxDscrTab[ETH_TXBUFNB];
+rt_uint8_t Rx_Buff[ETH_RXBUFNB][ETH_MAX_PACKET_SIZE], Tx_Buff[ETH_TXBUFNB][ETH_MAX_PACKET_SIZE];
+
+#define MAX_ADDR_LEN 6
+struct rt_stm32_eth
+{
+	/* inherit from ethernet device */
+	struct eth_device parent;
+
+	/* interface address info. */
+	rt_uint8_t  dev_addr[MAX_ADDR_LEN];			/* hw address	*/
+};
+static struct rt_stm32_eth stm32_eth_device;
+
+/* interrupt service routine */
+void rt_stm32_eth_isr(int irqno)
+{
+    rt_uint32_t status;
+
+    if (status) // if receive packet
+    {
+        rt_err_t result;
+
+        /* a frame has been received */
+        result = eth_device_ready(&(stm32_eth_device.parent));
+        RT_ASSERT(result == RT_EOK);
+    }
+
+    if (status) // if finished packet transmission
+    {
+    }
+}
+
+/* RT-Thread Device Interface */
+/* initialize the interface */
+static rt_err_t rt_stm32_eth_init(rt_device_t dev)
+{
+    vu32 Value = 0;
+
+    /* Reset ETHERNET on AHB Bus */
+    ETH_DeInit();
+
+    /* Software reset */
+    ETH_SoftwareReset();
+
+    /* Wait for software reset */
+    while(ETH_GetSoftwareResetStatus()==SET);
+
+    /* ETHERNET Configuration ------------------------------------------------------*/
+    /* Call ETH_StructInit if you don't like to configure all ETH_InitStructure parameter */
+    ETH_StructInit(&ETH_InitStructure);
+
+    /* Fill ETH_InitStructure parametrs */
+    /*------------------------   MAC   -----------------------------------*/
+    ETH_InitStructure.ETH_AutoNegotiation = ETH_AutoNegotiation_Enable  ;
+    ETH_InitStructure.ETH_Speed = ETH_Speed_100M;
+    ETH_InitStructure.ETH_LoopbackMode = ETH_LoopbackMode_Disable;
+    ETH_InitStructure.ETH_Mode = ETH_Mode_FullDuplex;
+    ETH_InitStructure.ETH_RetryTransmission = ETH_RetryTransmission_Disable;
+    ETH_InitStructure.ETH_AutomaticPadCRCStrip = ETH_AutomaticPadCRCStrip_Disable;
+    ETH_InitStructure.ETH_ReceiveAll = ETH_ReceiveAll_Enable;
+    ETH_InitStructure.ETH_BroadcastFramesReception = ETH_BroadcastFramesReception_Disable;
+    ETH_InitStructure.ETH_PromiscuousMode = ETH_PromiscuousMode_Disable;
+    ETH_InitStructure.ETH_MulticastFramesFilter = ETH_MulticastFramesFilter_Perfect;
+    ETH_InitStructure.ETH_UnicastFramesFilter = ETH_UnicastFramesFilter_Perfect;
+
+    /* Configure ETHERNET */
+    Value = ETH_Init(&ETH_InitStructure, PHY_ADDRESS);
+
+    /* Initialize Tx Descriptors list: Chain Mode */
+    ETH_DMATxDescChainInit(DMATxDscrTab, &Tx_Buff[0][0], ETH_TXBUFNB);
+    /* Initialize Rx Descriptors list: Chain Mode  */
+    ETH_DMARxDescChainInit(DMARxDscrTab, &Rx_Buff[0][0], ETH_RXBUFNB);
+
+    /* Enable MAC and DMA transmission and reception */
+    ETH_Start();
+
+    return RT_EOK;
+}
+
+static rt_err_t rt_stm32_eth_open(rt_device_t dev, rt_uint16_t oflag)
+{
+	return RT_EOK;
+}
+
+static rt_err_t rt_stm32_eth_close(rt_device_t dev)
+{
+	return RT_EOK;
+}
+
+static rt_size_t rt_stm32_eth_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
+{
+	rt_set_errno(-RT_ENOSYS);
+	return 0;
+}
+
+static rt_size_t rt_stm32_eth_write (rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
+{
+	rt_set_errno(-RT_ENOSYS);
+	return 0;
+}
+
+static rt_err_t rt_stm32_eth_control(rt_device_t dev, rt_uint8_t cmd, void *args)
+{
+	switch(cmd)
+	{
+	case NIOCTL_GADDR:
+		/* get mac address */
+		if(args) rt_memcpy(args, stm32_eth_device.dev_addr, 6);
+		else return -RT_ERROR;
+		break;
+
+	default :
+		break;
+	}
+
+	return RT_EOK;
+}
+
+/* ethernet device interface */
+/* transmit packet. */
+rt_err_t rt_stm32_eth_tx( rt_device_t dev, struct pbuf* p)
+{
+	struct pbuf* q;
+	rt_uint32_t len;
+	rt_uint8_t* ptr;
+
+	for (q = p; q != NULL; q = q->next)
+	{
+		len = q->len;
+		ptr = q->payload;
+
+		/* write data to device */
+	}
+
+	return RT_EOK;
+}
+
+/* reception packet. */
+struct pbuf *rt_stm32_eth_rx(rt_device_t dev)
+{
+    struct pbuf* p;
+	rt_uint32_t len;
+
+    /* init p pointer */
+    p = RT_NULL;
+
+    if (1) // if there is packet in device
+    {
+        /* get one packet length */
+        len = 0; // packet length
+
+        /* allocate buffer */
+        p = pbuf_alloc(PBUF_LINK, len, PBUF_RAM);
+
+        if (p != RT_NULL)
+        {
+            rt_uint8_t* data;
+            struct pbuf* q;
+
+            for (q = p; q != RT_NULL; q= q->next)
+            {
+                data = q->payload;
+                len = q->len;
+
+                /* read data from device */
+            }
+        }
+    }
+    else
+    {
+        /* restore interrupt */
+    }
+
+    return p;
+}
+
+void rt_hw_stm32_eth_init()
+{
+	stm32_eth_device.parent.parent.init       = rt_stm32_eth_init;
+	stm32_eth_device.parent.parent.open       = rt_stm32_eth_open;
+	stm32_eth_device.parent.parent.close      = rt_stm32_eth_close;
+	stm32_eth_device.parent.parent.read       = rt_stm32_eth_read;
+	stm32_eth_device.parent.parent.write      = rt_stm32_eth_write;
+	stm32_eth_device.parent.parent.control    = rt_stm32_eth_control;
+	stm32_eth_device.parent.parent.private    = RT_NULL;
+
+	stm32_eth_device.parent.eth_rx     = rt_stm32_eth_rx;
+	stm32_eth_device.parent.eth_tx     = rt_stm32_eth_tx;
+
+	eth_device_init(&(stm32_eth_device.parent), "e0");
+}

bsp/stm3210/led.c

@@ -5,8 +5,7 @@
 #define GPIO_LED					GPIOF
 #define GPIO_Pin_LED				GPIO_Pin_6 | GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9
 
-static const rt_uint16_t led_map[] = {GPIO_Pin_6, GPIO_Pin_7, GPIO_Pin_8, GPIO_Pin_9
-};
+static const rt_uint16_t led_map[] = {GPIO_Pin_6, GPIO_Pin_7, GPIO_Pin_8, GPIO_Pin_9};
 static rt_uint8_t led_inited = 0;
 
 static void GPIO_Configuration(void)