[BSP] Support YD-CH32V307VCT6 (#8473)

bsp/wch/risc-v/yd-ch32v307vct6/.config

@@ -0,0 +1,1084 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# RT-Thread Configuration
+#
+
+#
+# RT-Thread Kernel
+#
+CONFIG_RT_NAME_MAX=8
+# CONFIG_RT_USING_ARCH_DATA_TYPE is not set
+# CONFIG_RT_USING_NANO is not set
+# CONFIG_RT_USING_AMP is not set
+# CONFIG_RT_USING_SMP is not set
+CONFIG_RT_CPUS_NR=1
+CONFIG_RT_ALIGN_SIZE=8
+# CONFIG_RT_THREAD_PRIORITY_8 is not set
+CONFIG_RT_THREAD_PRIORITY_32=y
+# CONFIG_RT_THREAD_PRIORITY_256 is not set
+CONFIG_RT_THREAD_PRIORITY_MAX=32
+CONFIG_RT_TICK_PER_SECOND=1000
+CONFIG_RT_USING_OVERFLOW_CHECK=y
+CONFIG_RT_USING_HOOK=y
+CONFIG_RT_HOOK_USING_FUNC_PTR=y
+CONFIG_RT_USING_IDLE_HOOK=y
+CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
+CONFIG_IDLE_THREAD_STACK_SIZE=512
+CONFIG_RT_USING_TIMER_SOFT=y
+CONFIG_RT_TIMER_THREAD_PRIO=4
+CONFIG_RT_TIMER_THREAD_STACK_SIZE=512
+
+#
+# kservice optimization
+#
+# CONFIG_RT_KSERVICE_USING_STDLIB is not set
+# CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
+# CONFIG_RT_USING_TINY_FFS is not set
+# CONFIG_RT_KPRINTF_USING_LONGLONG is not set
+CONFIG_RT_USING_DEBUG=y
+CONFIG_RT_DEBUGING_COLOR=y
+CONFIG_RT_DEBUGING_CONTEXT=y
+# CONFIG_RT_DEBUGING_AUTO_INIT is not set
+
+#
+# Inter-Thread communication
+#
+CONFIG_RT_USING_SEMAPHORE=y
+CONFIG_RT_USING_MUTEX=y
+CONFIG_RT_USING_EVENT=y
+CONFIG_RT_USING_MAILBOX=y
+CONFIG_RT_USING_MESSAGEQUEUE=y
+# CONFIG_RT_USING_MESSAGEQUEUE_PRIORITY is not set
+# CONFIG_RT_USING_SIGNALS is not set
+
+#
+# Memory Management
+#
+# CONFIG_RT_USING_MEMPOOL is not set
+CONFIG_RT_USING_SMALL_MEM=y
+# CONFIG_RT_USING_SLAB is not set
+# CONFIG_RT_USING_MEMHEAP is not set
+CONFIG_RT_USING_SMALL_MEM_AS_HEAP=y
+# CONFIG_RT_USING_MEMHEAP_AS_HEAP is not set
+# CONFIG_RT_USING_SLAB_AS_HEAP is not set
+# CONFIG_RT_USING_USERHEAP is not set
+# CONFIG_RT_USING_NOHEAP is not set
+# CONFIG_RT_USING_MEMTRACE is not set
+# CONFIG_RT_USING_HEAP_ISR is not set
+CONFIG_RT_USING_HEAP=y
+CONFIG_RT_USING_DEVICE=y
+# CONFIG_RT_USING_DEVICE_OPS is not set
+# CONFIG_RT_USING_INTERRUPT_INFO is not set
+CONFIG_RT_USING_CONSOLE=y
+CONFIG_RT_CONSOLEBUF_SIZE=128
+CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
+CONFIG_RT_VER_NUM=0x50100
+# CONFIG_RT_USING_STDC_ATOMIC is not set
+CONFIG_RT_BACKTRACE_LEVEL_MAX_NR=32
+# CONFIG_RT_USING_CACHE is not set
+CONFIG_RT_USING_HW_ATOMIC=y
+# CONFIG_ARCH_ARM_BOOTWITH_FLUSH_CACHE is not set
+# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
+# CONFIG_RT_USING_CPU_FFS is not set
+CONFIG_ARCH_RISCV=y
+
+#
+# RT-Thread Components
+#
+CONFIG_RT_USING_COMPONENTS_INIT=y
+CONFIG_RT_USING_USER_MAIN=y
+CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
+CONFIG_RT_MAIN_THREAD_PRIORITY=10
+# CONFIG_RT_USING_LEGACY is not set
+CONFIG_RT_USING_MSH=y
+CONFIG_RT_USING_FINSH=y
+CONFIG_FINSH_USING_MSH=y
+CONFIG_FINSH_THREAD_NAME="tshell"
+CONFIG_FINSH_THREAD_PRIORITY=20
+CONFIG_FINSH_THREAD_STACK_SIZE=1024
+CONFIG_FINSH_USING_HISTORY=y
+CONFIG_FINSH_HISTORY_LINES=5
+CONFIG_FINSH_USING_SYMTAB=y
+CONFIG_FINSH_CMD_SIZE=80
+CONFIG_MSH_USING_BUILT_IN_COMMANDS=y
+CONFIG_FINSH_USING_DESCRIPTION=y
+# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
+# CONFIG_FINSH_USING_AUTH is not set
+CONFIG_FINSH_ARG_MAX=10
+CONFIG_FINSH_USING_OPTION_COMPLETION=y
+
+#
+# DFS: device virtual file system
+#
+# CONFIG_RT_USING_DFS is not set
+# CONFIG_RT_USING_FAL is not set
+
+#
+# Device Drivers
+#
+# CONFIG_RT_USING_DM is not set
+CONFIG_RT_USING_DEVICE_IPC=y
+CONFIG_RT_UNAMED_PIPE_NUMBER=64
+# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set
+CONFIG_RT_USING_SERIAL=y
+CONFIG_RT_USING_SERIAL_V1=y
+# CONFIG_RT_USING_SERIAL_V2 is not set
+# CONFIG_RT_SERIAL_USING_DMA is not set
+CONFIG_RT_SERIAL_RB_BUFSZ=64
+# CONFIG_RT_USING_CAN is not set
+# CONFIG_RT_USING_HWTIMER is not set
+# CONFIG_RT_USING_CPUTIME is not set
+# CONFIG_RT_USING_I2C is not set
+# CONFIG_RT_USING_PHY is not set
+CONFIG_RT_USING_PIN=y
+# CONFIG_RT_USING_ADC is not set
+# CONFIG_RT_USING_DAC is not set
+# CONFIG_RT_USING_NULL is not set
+# CONFIG_RT_USING_ZERO is not set
+# CONFIG_RT_USING_RANDOM is not set
+# CONFIG_RT_USING_PWM is not set
+# CONFIG_RT_USING_MTD_NOR is not set
+# CONFIG_RT_USING_MTD_NAND is not set
+# CONFIG_RT_USING_PM is not set
+# CONFIG_RT_USING_RTC is not set
+# CONFIG_RT_USING_SDIO is not set
+# CONFIG_RT_USING_SPI is not set
+# CONFIG_RT_USING_WDT is not set
+# CONFIG_RT_USING_AUDIO is not set
+# CONFIG_RT_USING_SENSOR is not set
+# CONFIG_RT_USING_TOUCH is not set
+# CONFIG_RT_USING_LCD is not set
+# CONFIG_RT_USING_HWCRYPTO is not set
+# CONFIG_RT_USING_PULSE_ENCODER is not set
+# CONFIG_RT_USING_INPUT_CAPTURE is not set
+# CONFIG_RT_USING_DEV_BUS is not set
+# CONFIG_RT_USING_WIFI is not set
+# CONFIG_RT_USING_VIRTIO is not set
+# CONFIG_RT_USING_KTIME is not set
+
+#
+# Using USB
+#
+# CONFIG_RT_USING_USB is not set
+# CONFIG_RT_USING_USB_HOST is not set
+# CONFIG_RT_USING_USB_DEVICE is not set
+
+#
+# C/C++ and POSIX layer
+#
+
+#
+# ISO-ANSI C layer
+#
+
+#
+# Timezone and Daylight Saving Time
+#
+# CONFIG_RT_LIBC_USING_FULL_TZ_DST is not set
+CONFIG_RT_LIBC_USING_LIGHT_TZ_DST=y
+CONFIG_RT_LIBC_TZ_DEFAULT_HOUR=8
+CONFIG_RT_LIBC_TZ_DEFAULT_MIN=0
+CONFIG_RT_LIBC_TZ_DEFAULT_SEC=0
+
+#
+# POSIX (Portable Operating System Interface) layer
+#
+# CONFIG_RT_USING_POSIX_FS is not set
+# CONFIG_RT_USING_POSIX_DELAY is not set
+# CONFIG_RT_USING_POSIX_CLOCK is not set
+# CONFIG_RT_USING_POSIX_TIMER is not set
+# CONFIG_RT_USING_PTHREADS is not set
+# CONFIG_RT_USING_MODULE is not set
+
+#
+# Interprocess Communication (IPC)
+#
+# CONFIG_RT_USING_POSIX_PIPE is not set
+# CONFIG_RT_USING_POSIX_MESSAGE_QUEUE is not set
+# CONFIG_RT_USING_POSIX_MESSAGE_SEMAPHORE is not set
+
+#
+# Socket is in the 'Network' category
+#
+# CONFIG_RT_USING_CPLUSPLUS is not set
+
+#
+# Network
+#
+# CONFIG_RT_USING_SAL is not set
+# CONFIG_RT_USING_NETDEV is not set
+# CONFIG_RT_USING_LWIP is not set
+# CONFIG_RT_USING_AT is not set
+
+#
+# Memory protection
+#
+# CONFIG_RT_USING_MEM_PROTECTION is not set
+# CONFIG_RT_USING_HW_STACK_GUARD is not set
+
+#
+# Utilities
+#
+# CONFIG_RT_USING_RYM is not set
+# CONFIG_RT_USING_ULOG is not set
+# CONFIG_RT_USING_UTEST is not set
+# CONFIG_RT_USING_VAR_EXPORT is not set
+# CONFIG_RT_USING_RESOURCE_ID is not set
+# CONFIG_RT_USING_ADT is not set
+# CONFIG_RT_USING_RT_LINK is not set
+# CONFIG_RT_USING_VBUS is not set
+
+#
+# RT-Thread Utestcases
+#
+# CONFIG_RT_USING_UTESTCASES is not set
+
+#
+# RT-Thread online packages
+#
+
+#
+# IoT - internet of things
+#
+# CONFIG_PKG_USING_LWIP is not set
+# CONFIG_PKG_USING_LORAWAN_DRIVER is not set
+# CONFIG_PKG_USING_PAHOMQTT is not set
+# CONFIG_PKG_USING_UMQTT is not set
+# CONFIG_PKG_USING_WEBCLIENT is not set
+# CONFIG_PKG_USING_WEBNET is not set
+# CONFIG_PKG_USING_MONGOOSE is not set
+# CONFIG_PKG_USING_MYMQTT is not set
+# CONFIG_PKG_USING_KAWAII_MQTT is not set
+# CONFIG_PKG_USING_BC28_MQTT is not set
+# CONFIG_PKG_USING_WEBTERMINAL is not set
+# CONFIG_PKG_USING_FREEMODBUS is not set
+# CONFIG_PKG_USING_NANOPB is not set
+
+#
+# Wi-Fi
+#
+
+#
+# Marvell WiFi
+#
+# CONFIG_PKG_USING_WLANMARVELL is not set
+
+#
+# Wiced WiFi
+#
+# CONFIG_PKG_USING_WLAN_WICED is not set
+# CONFIG_PKG_USING_RW007 is not set
+
+#
+# CYW43012 WiFi
+#
+# CONFIG_PKG_USING_WLAN_CYW43012 is not set
+
+#
+# BL808 WiFi
+#
+# CONFIG_PKG_USING_WLAN_BL808 is not set
+
+#
+# CYW43439 WiFi
+#
+# CONFIG_PKG_USING_WLAN_CYW43439 is not set
+# CONFIG_PKG_USING_COAP is not set
+# CONFIG_PKG_USING_NOPOLL is not set
+# CONFIG_PKG_USING_NETUTILS is not set
+# CONFIG_PKG_USING_CMUX is not set
+# CONFIG_PKG_USING_PPP_DEVICE is not set
+# CONFIG_PKG_USING_AT_DEVICE is not set
+# CONFIG_PKG_USING_ATSRV_SOCKET is not set
+# CONFIG_PKG_USING_WIZNET is not set
+# CONFIG_PKG_USING_ZB_COORDINATOR is not set
+
+#
+# IoT Cloud
+#
+# CONFIG_PKG_USING_ONENET is not set
+# CONFIG_PKG_USING_GAGENT_CLOUD is not set
+# CONFIG_PKG_USING_ALI_IOTKIT is not set
+# CONFIG_PKG_USING_AZURE is not set
+# CONFIG_PKG_USING_TENCENT_IOT_EXPLORER is not set
+# CONFIG_PKG_USING_JIOT-C-SDK is not set
+# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set
+# CONFIG_PKG_USING_JOYLINK is not set
+# CONFIG_PKG_USING_IOTSHARP_SDK is not set
+# CONFIG_PKG_USING_NIMBLE is not set
+# CONFIG_PKG_USING_LLSYNC_SDK_ADAPTER is not set
+# CONFIG_PKG_USING_OTA_DOWNLOADER is not set
+# CONFIG_PKG_USING_IPMSG is not set
+# CONFIG_PKG_USING_LSSDP is not set
+# CONFIG_PKG_USING_AIRKISS_OPEN is not set
+# CONFIG_PKG_USING_LIBRWS is not set
+# CONFIG_PKG_USING_TCPSERVER is not set
+# CONFIG_PKG_USING_PROTOBUF_C is not set
+# CONFIG_PKG_USING_DLT645 is not set
+# CONFIG_PKG_USING_QXWZ is not set
+# CONFIG_PKG_USING_SMTP_CLIENT is not set
+# CONFIG_PKG_USING_ABUP_FOTA is not set
+# CONFIG_PKG_USING_LIBCURL2RTT is not set
+# CONFIG_PKG_USING_CAPNP is not set
+# CONFIG_PKG_USING_AGILE_TELNET is not set
+# CONFIG_PKG_USING_NMEALIB is not set
+# CONFIG_PKG_USING_PDULIB is not set
+# CONFIG_PKG_USING_BTSTACK is not set
+# CONFIG_PKG_USING_BT_CYW43012 is not set
+# CONFIG_PKG_USING_CYW43XX is not set
+# CONFIG_PKG_USING_LORAWAN_ED_STACK is not set
+# CONFIG_PKG_USING_WAYZ_IOTKIT is not set
+# CONFIG_PKG_USING_MAVLINK is not set
+# CONFIG_PKG_USING_BSAL is not set
+# CONFIG_PKG_USING_AGILE_MODBUS is not set
+# CONFIG_PKG_USING_AGILE_FTP is not set
+# CONFIG_PKG_USING_EMBEDDEDPROTO is not set
+# CONFIG_PKG_USING_RT_LINK_HW is not set
+# CONFIG_PKG_USING_RYANMQTT is not set
+# CONFIG_PKG_USING_RYANW5500 is not set
+# CONFIG_PKG_USING_LORA_PKT_FWD is not set
+# CONFIG_PKG_USING_LORA_GW_DRIVER_LIB is not set
+# CONFIG_PKG_USING_LORA_PKT_SNIFFER is not set
+# CONFIG_PKG_USING_HM is not set
+# CONFIG_PKG_USING_SMALL_MODBUS is not set
+# CONFIG_PKG_USING_NET_SERVER is not set
+# CONFIG_PKG_USING_ZFTP is not set
+# CONFIG_PKG_USING_WOL is not set
+# CONFIG_PKG_USING_ZEPHYR_POLLING is not set
+# CONFIG_PKG_USING_MATTER_ADAPTATION_LAYER is not set
+# CONFIG_PKG_USING_LHC_MODBUS is not set
+
+#
+# security packages
+#
+# CONFIG_PKG_USING_MBEDTLS is not set
+# CONFIG_PKG_USING_LIBSODIUM is not set
+# CONFIG_PKG_USING_LIBHYDROGEN is not set
+# CONFIG_PKG_USING_TINYCRYPT is not set
+# CONFIG_PKG_USING_TFM is not set
+# CONFIG_PKG_USING_YD_CRYPTO is not set
+
+#
+# language packages
+#
+
+#
+# JSON: JavaScript Object Notation, a lightweight data-interchange format
+#
+# CONFIG_PKG_USING_CJSON is not set
+# CONFIG_PKG_USING_LJSON is not set
+# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
+# CONFIG_PKG_USING_RAPIDJSON is not set
+# CONFIG_PKG_USING_JSMN is not set
+# CONFIG_PKG_USING_AGILE_JSMN is not set
+# CONFIG_PKG_USING_PARSON is not set
+
+#
+# XML: Extensible Markup Language
+#
+# CONFIG_PKG_USING_SIMPLE_XML is not set
+# CONFIG_PKG_USING_EZXML is not set
+# CONFIG_PKG_USING_LUATOS_SOC is not set
+# CONFIG_PKG_USING_LUA is not set
+# CONFIG_PKG_USING_JERRYSCRIPT is not set
+# CONFIG_PKG_USING_MICROPYTHON is not set
+# CONFIG_PKG_USING_PIKASCRIPT is not set
+# CONFIG_PKG_USING_RTT_RUST is not set
+
+#
+# multimedia packages
+#
+
+#
+# LVGL: powerful and easy-to-use embedded GUI library
+#
+# CONFIG_PKG_USING_LVGL is not set
+# CONFIG_PKG_USING_LV_MUSIC_DEMO is not set
+# CONFIG_PKG_USING_GUI_GUIDER_DEMO is not set
+
+#
+# u8g2: a monochrome graphic library
+#
+# CONFIG_PKG_USING_U8G2_OFFICIAL is not set
+# CONFIG_PKG_USING_U8G2 is not set
+# CONFIG_PKG_USING_OPENMV is not set
+# CONFIG_PKG_USING_MUPDF is not set
+# CONFIG_PKG_USING_STEMWIN is not set
+# CONFIG_PKG_USING_WAVPLAYER is not set
+# CONFIG_PKG_USING_TJPGD is not set
+# CONFIG_PKG_USING_PDFGEN is not set
+# CONFIG_PKG_USING_HELIX is not set
+# CONFIG_PKG_USING_AZUREGUIX is not set
+# CONFIG_PKG_USING_TOUCHGFX2RTT is not set
+# CONFIG_PKG_USING_NUEMWIN is not set
+# CONFIG_PKG_USING_MP3PLAYER is not set
+# CONFIG_PKG_USING_TINYJPEG is not set
+# CONFIG_PKG_USING_UGUI is not set
+# CONFIG_PKG_USING_MCURSES is not set
+# CONFIG_PKG_USING_TERMBOX is not set
+# CONFIG_PKG_USING_VT100 is not set
+# CONFIG_PKG_USING_QRCODE is not set
+# CONFIG_PKG_USING_GUIENGINE is not set
+# CONFIG_PKG_USING_3GPP_AMRNB is not set
+
+#
+# tools packages
+#
+# CONFIG_PKG_USING_CMBACKTRACE is not set
+# CONFIG_PKG_USING_EASYFLASH is not set
+# CONFIG_PKG_USING_EASYLOGGER is not set
+# CONFIG_PKG_USING_SYSTEMVIEW is not set
+# CONFIG_PKG_USING_SEGGER_RTT is not set
+# CONFIG_PKG_USING_RTT_AUTO_EXE_CMD is not set
+# CONFIG_PKG_USING_RDB is not set
+# CONFIG_PKG_USING_ULOG_EASYFLASH is not set
+# CONFIG_PKG_USING_LOGMGR is not set
+# CONFIG_PKG_USING_ADBD is not set
+# CONFIG_PKG_USING_COREMARK is not set
+# CONFIG_PKG_USING_DHRYSTONE is not set
+# CONFIG_PKG_USING_MEMORYPERF is not set
+# CONFIG_PKG_USING_NR_MICRO_SHELL is not set
+# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set
+# CONFIG_PKG_USING_LUNAR_CALENDAR is not set
+# CONFIG_PKG_USING_BS8116A is not set
+# CONFIG_PKG_USING_GPS_RMC is not set
+# CONFIG_PKG_USING_URLENCODE is not set
+# CONFIG_PKG_USING_UMCN is not set
+# CONFIG_PKG_USING_LWRB2RTT is not set
+# CONFIG_PKG_USING_CPU_USAGE is not set
+# CONFIG_PKG_USING_GBK2UTF8 is not set
+# CONFIG_PKG_USING_VCONSOLE is not set
+# CONFIG_PKG_USING_VCONSOLE_V100 is not set
+# CONFIG_PKG_USING_VCONSOLE_LATEST_VERSION is not set
+# CONFIG_PKG_USING_KDB is not set
+# CONFIG_PKG_USING_WAMR is not set
+# CONFIG_PKG_USING_MICRO_XRCE_DDS_CLIENT is not set
+# CONFIG_PKG_USING_LWLOG is not set
+# CONFIG_PKG_USING_ANV_TRACE is not set
+# CONFIG_PKG_USING_ANV_MEMLEAK is not set
+# CONFIG_PKG_USING_ANV_TESTSUIT is not set
+# CONFIG_PKG_USING_ANV_BENCH is not set
+# CONFIG_PKG_USING_DEVMEM is not set
+# CONFIG_PKG_USING_REGEX is not set
+# CONFIG_PKG_USING_MEM_SANDBOX is not set
+# CONFIG_PKG_USING_SOLAR_TERMS is not set
+# CONFIG_PKG_USING_GAN_ZHI is not set
+# CONFIG_PKG_USING_FDT is not set
+# CONFIG_PKG_USING_CBOX is not set
+# CONFIG_PKG_USING_SNOWFLAKE is not set
+# CONFIG_PKG_USING_HASH_MATCH is not set
+# CONFIG_PKG_USING_ARMV7M_DWT_TOOL is not set
+# CONFIG_PKG_USING_VOFA_PLUS is not set
+# CONFIG_PKG_USING_ZDEBUG is not set
+
+#
+# system packages
+#
+
+#
+# enhanced kernel services
+#
+# CONFIG_PKG_USING_RT_MEMCPY_CM is not set
+# CONFIG_PKG_USING_RT_KPRINTF_THREADSAFE is not set
+# CONFIG_PKG_USING_RT_VSNPRINTF_FULL is not set
+
+#
+# acceleration: Assembly language or algorithmic acceleration packages
+#
+# CONFIG_PKG_USING_QFPLIB_M0_FULL is not set
+# CONFIG_PKG_USING_QFPLIB_M0_TINY is not set
+# CONFIG_PKG_USING_QFPLIB_M3 is not set
+
+#
+# CMSIS: ARM Cortex-M Microcontroller Software Interface Standard
+#
+# CONFIG_PKG_USING_CMSIS_5 is not set
+# CONFIG_PKG_USING_CMSIS_RTOS1 is not set
+# CONFIG_PKG_USING_CMSIS_RTOS2 is not set
+
+#
+# Micrium: Micrium software products porting for RT-Thread
+#
+# CONFIG_PKG_USING_UCOSIII_WRAPPER is not set
+# CONFIG_PKG_USING_UCOSII_WRAPPER is not set
+# CONFIG_PKG_USING_UC_CRC is not set
+# CONFIG_PKG_USING_UC_CLK is not set
+# CONFIG_PKG_USING_UC_COMMON is not set
+# CONFIG_PKG_USING_UC_MODBUS is not set
+# CONFIG_PKG_USING_FREERTOS_WRAPPER is not set
+# CONFIG_PKG_USING_LITEOS_SDK is not set
+# CONFIG_PKG_USING_TZ_DATABASE is not set
+# CONFIG_PKG_USING_CAIRO is not set
+# CONFIG_PKG_USING_PIXMAN is not set
+# CONFIG_PKG_USING_PARTITION is not set
+# CONFIG_PKG_USING_PERF_COUNTER is not set
+# CONFIG_PKG_USING_FLASHDB is not set
+# CONFIG_PKG_USING_SQLITE is not set
+# CONFIG_PKG_USING_RTI is not set
+# CONFIG_PKG_USING_DFS_YAFFS is not set
+# CONFIG_PKG_USING_LITTLEFS is not set
+# CONFIG_PKG_USING_DFS_JFFS2 is not set
+# CONFIG_PKG_USING_DFS_UFFS is not set
+# CONFIG_PKG_USING_LWEXT4 is not set
+# CONFIG_PKG_USING_THREAD_POOL is not set
+# CONFIG_PKG_USING_ROBOTS is not set
+# CONFIG_PKG_USING_EV is not set
+# CONFIG_PKG_USING_SYSWATCH is not set
+# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set
+# CONFIG_PKG_USING_PLCCORE is not set
+# CONFIG_PKG_USING_RAMDISK is not set
+# CONFIG_PKG_USING_MININI is not set
+# CONFIG_PKG_USING_QBOOT is not set
+# CONFIG_PKG_USING_PPOOL is not set
+# CONFIG_PKG_USING_OPENAMP is not set
+# CONFIG_PKG_USING_RPMSG_LITE is not set
+# CONFIG_PKG_USING_LPM is not set
+# CONFIG_PKG_USING_TLSF is not set
+# CONFIG_PKG_USING_EVENT_RECORDER is not set
+# CONFIG_PKG_USING_ARM_2D is not set
+# CONFIG_PKG_USING_MCUBOOT is not set
+# CONFIG_PKG_USING_TINYUSB is not set
+# CONFIG_PKG_USING_CHERRYUSB is not set
+# CONFIG_PKG_CHERRYUSB_DEVICE_FS is not set
+# CONFIG_PKG_CHERRYUSB_DEVICE_HS is not set
+# CONFIG_PKG_CHERRYUSB_DEVICE_CUSTOM is not set
+# CONFIG_PKG_CHERRYUSB_DEVICE_BL is not set
+# CONFIG_PKG_CHERRYUSB_DEVICE_CH32 is not set
+# CONFIG_PKG_CHERRYUSB_DEVICE_FSDEV is not set
+# CONFIG_PKG_CHERRYUSB_DEVICE_DWC2 is not set
+# CONFIG_PKG_CHERRYUSB_DEVICE_MM32 is not set
+# CONFIG_PKG_CHERRYUSB_DEVICE_MUSB is not set
+# CONFIG_PKG_CHERRYUSB_DEVICE_HPM is not set
+# CONFIG_PKG_CHERRYUSB_DEVICE_PUSB2 is not set
+# CONFIG_PKG_CHERRYUSB_DEVICE_CH32_CH32V307 is not set
+# CONFIG_PKG_USING_CHERRYUSB_LATEST_VERSION is not set
+# CONFIG_PKG_USING_CHERRYUSB_V01002 is not set
+# CONFIG_PKG_USING_KMULTI_RTIMER is not set
+# CONFIG_PKG_USING_TFDB is not set
+# CONFIG_PKG_USING_QPC is not set
+# CONFIG_PKG_USING_AGILE_UPGRADE is not set
+# CONFIG_PKG_USING_FLASH_BLOB is not set
+# CONFIG_PKG_USING_MLIBC is not set
+# CONFIG_PKG_USING_TASK_MSG_BUS is not set
+# CONFIG_PKG_USING_SFDB is not set
+# CONFIG_PKG_USING_RTP is not set
+# CONFIG_PKG_USING_REB is not set
+# CONFIG_PKG_USING_R_RHEALSTONE is not set
+
+#
+# peripheral libraries and drivers
+#
+
+#
+# sensors drivers
+#
+# CONFIG_PKG_USING_LSM6DSM is not set
+# CONFIG_PKG_USING_LSM6DSL is not set
+# CONFIG_PKG_USING_LPS22HB is not set
+# CONFIG_PKG_USING_HTS221 is not set
+# CONFIG_PKG_USING_LSM303AGR is not set
+# CONFIG_PKG_USING_BME280 is not set
+# CONFIG_PKG_USING_BME680 is not set
+# CONFIG_PKG_USING_BMA400 is not set
+# CONFIG_PKG_USING_BMI160_BMX160 is not set
+# CONFIG_PKG_USING_SPL0601 is not set
+# CONFIG_PKG_USING_MS5805 is not set
+# CONFIG_PKG_USING_DA270 is not set
+# CONFIG_PKG_USING_DF220 is not set
+# CONFIG_PKG_USING_HSHCAL001 is not set
+# CONFIG_PKG_USING_BH1750 is not set
+# CONFIG_PKG_USING_MPU6XXX is not set
+# CONFIG_PKG_USING_AHT10 is not set
+# CONFIG_PKG_USING_AP3216C is not set
+# CONFIG_PKG_USING_TSL4531 is not set
+# CONFIG_PKG_USING_DS18B20 is not set
+# CONFIG_PKG_USING_DHT11 is not set
+# CONFIG_PKG_USING_DHTXX is not set
+# CONFIG_PKG_USING_GY271 is not set
+# CONFIG_PKG_USING_GP2Y10 is not set
+# CONFIG_PKG_USING_SGP30 is not set
+# CONFIG_PKG_USING_HDC1000 is not set
+# CONFIG_PKG_USING_BMP180 is not set
+# CONFIG_PKG_USING_BMP280 is not set
+# CONFIG_PKG_USING_SHTC1 is not set
+# CONFIG_PKG_USING_BMI088 is not set
+# CONFIG_PKG_USING_HMC5883 is not set
+# CONFIG_PKG_USING_MAX6675 is not set
+# CONFIG_PKG_USING_TMP1075 is not set
+# CONFIG_PKG_USING_SR04 is not set
+# CONFIG_PKG_USING_CCS811 is not set
+# CONFIG_PKG_USING_PMSXX is not set
+# CONFIG_PKG_USING_RT3020 is not set
+# CONFIG_PKG_USING_MLX90632 is not set
+# CONFIG_PKG_USING_MLX90393 is not set
+# CONFIG_PKG_USING_MLX90392 is not set
+# CONFIG_PKG_USING_MLX90397 is not set
+# CONFIG_PKG_USING_MS5611 is not set
+# CONFIG_PKG_USING_MAX31865 is not set
+# CONFIG_PKG_USING_VL53L0X is not set
+# CONFIG_PKG_USING_INA260 is not set
+# CONFIG_PKG_USING_MAX30102 is not set
+# CONFIG_PKG_USING_INA226 is not set
+# CONFIG_PKG_USING_LIS2DH12 is not set
+# CONFIG_PKG_USING_HS300X is not set
+# CONFIG_PKG_USING_ZMOD4410 is not set
+# CONFIG_PKG_USING_ISL29035 is not set
+# CONFIG_PKG_USING_MMC3680KJ is not set
+# CONFIG_PKG_USING_QMP6989 is not set
+# CONFIG_PKG_USING_BALANCE is not set
+# CONFIG_PKG_USING_SHT2X is not set
+# CONFIG_PKG_USING_SHT3X is not set
+# CONFIG_PKG_USING_SHT4X is not set
+# CONFIG_PKG_USING_AD7746 is not set
+# CONFIG_PKG_USING_ADT74XX is not set
+# CONFIG_PKG_USING_MAX17048 is not set
+# CONFIG_PKG_USING_AS7341 is not set
+# CONFIG_PKG_USING_CW2015 is not set
+# CONFIG_PKG_USING_ICM20608 is not set
+# CONFIG_PKG_USING_PAJ7620 is not set
+# CONFIG_PKG_USING_STHS34PF80 is not set
+
+#
+# touch drivers
+#
+# CONFIG_PKG_USING_GT9147 is not set
+# CONFIG_PKG_USING_GT1151 is not set
+# CONFIG_PKG_USING_GT917S is not set
+# CONFIG_PKG_USING_GT911 is not set
+# CONFIG_PKG_USING_FT6206 is not set
+# CONFIG_PKG_USING_FT5426 is not set
+# CONFIG_PKG_USING_FT6236 is not set
+# CONFIG_PKG_USING_XPT2046_TOUCH is not set
+# CONFIG_PKG_USING_CST816X is not set
+# CONFIG_PKG_USING_REALTEK_AMEBA is not set
+# CONFIG_PKG_USING_STM32_SDIO is not set
+# CONFIG_PKG_USING_ESP_IDF is not set
+# CONFIG_PKG_USING_BUTTON is not set
+# CONFIG_PKG_USING_PCF8574 is not set
+# CONFIG_PKG_USING_SX12XX is not set
+# CONFIG_PKG_USING_SIGNAL_LED is not set
+# CONFIG_PKG_USING_LEDBLINK is not set
+# CONFIG_PKG_USING_LITTLED is not set
+# CONFIG_PKG_USING_LKDGUI is not set
+# CONFIG_PKG_USING_NRF5X_SDK is not set
+# CONFIG_PKG_USING_NRFX is not set
+
+#
+# Kendryte SDK
+#
+# CONFIG_PKG_USING_K210_SDK is not set
+# CONFIG_PKG_USING_KENDRYTE_SDK is not set
+# CONFIG_PKG_USING_INFRARED is not set
+# CONFIG_PKG_USING_MULTI_INFRARED is not set
+# CONFIG_PKG_USING_AGILE_BUTTON is not set
+# CONFIG_PKG_USING_AGILE_LED is not set
+# CONFIG_PKG_USING_AT24CXX is not set
+# CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set
+# CONFIG_PKG_USING_PCA9685 is not set
+# CONFIG_PKG_USING_ILI9341 is not set
+# CONFIG_PKG_USING_I2C_TOOLS is not set
+# CONFIG_PKG_USING_NRF24L01 is not set
+# CONFIG_PKG_USING_RPLIDAR is not set
+# CONFIG_PKG_USING_AS608 is not set
+# CONFIG_PKG_USING_RC522 is not set
+# CONFIG_PKG_USING_WS2812B is not set
+# CONFIG_PKG_USING_EMBARC_BSP is not set
+# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set
+# CONFIG_PKG_USING_MULTI_RTIMER is not set
+# CONFIG_PKG_USING_MAX7219 is not set
+# CONFIG_PKG_USING_BEEP is not set
+# CONFIG_PKG_USING_EASYBLINK is not set
+# CONFIG_PKG_USING_PMS_SERIES is not set
+# CONFIG_PKG_USING_NUCLEI_SDK is not set
+# CONFIG_PKG_USING_CAN_YMODEM is not set
+# CONFIG_PKG_USING_LORA_RADIO_DRIVER is not set
+# CONFIG_PKG_USING_QLED is not set
+# CONFIG_PKG_USING_AGILE_CONSOLE is not set
+# CONFIG_PKG_USING_LD3320 is not set
+# CONFIG_PKG_USING_WK2124 is not set
+# CONFIG_PKG_USING_LY68L6400 is not set
+# CONFIG_PKG_USING_DM9051 is not set
+# CONFIG_PKG_USING_SSD1306 is not set
+# CONFIG_PKG_USING_QKEY is not set
+# CONFIG_PKG_USING_RS485 is not set
+# CONFIG_PKG_USING_RS232 is not set
+# CONFIG_PKG_USING_NES is not set
+# CONFIG_PKG_USING_VIRTUAL_SENSOR is not set
+# CONFIG_PKG_USING_VDEVICE is not set
+# CONFIG_PKG_USING_SGM706 is not set
+# CONFIG_PKG_USING_STM32WB55_SDK is not set
+# CONFIG_PKG_USING_RDA58XX is not set
+# CONFIG_PKG_USING_LIBNFC is not set
+# CONFIG_PKG_USING_MFOC is not set
+# CONFIG_PKG_USING_TMC51XX is not set
+# CONFIG_PKG_USING_TCA9534 is not set
+# CONFIG_PKG_USING_KOBUKI is not set
+# CONFIG_PKG_USING_ROSSERIAL is not set
+# CONFIG_PKG_USING_MICRO_ROS is not set
+# CONFIG_PKG_USING_MCP23008 is not set
+# CONFIG_PKG_USING_BLUETRUM_SDK is not set
+# CONFIG_PKG_USING_MISAKA_AT24CXX is not set
+# CONFIG_PKG_USING_MISAKA_RGB_BLING is not set
+# CONFIG_PKG_USING_LORA_MODEM_DRIVER is not set
+# CONFIG_PKG_USING_SOFT_SERIAL is not set
+# CONFIG_PKG_USING_MB85RS16 is not set
+# CONFIG_PKG_USING_RFM300 is not set
+# CONFIG_PKG_USING_IO_INPUT_FILTER is not set
+# CONFIG_PKG_USING_RASPBERRYPI_PICO_SDK is not set
+# CONFIG_PKG_USING_LRF_NV7LIDAR is not set
+# CONFIG_PKG_USING_AIP650 is not set
+# CONFIG_PKG_USING_FINGERPRINT is not set
+# CONFIG_PKG_USING_BT_ECB02C is not set
+# CONFIG_PKG_USING_UAT is not set
+# CONFIG_PKG_USING_ST7789 is not set
+# CONFIG_PKG_USING_VS1003 is not set
+# CONFIG_PKG_USING_X9555 is not set
+# CONFIG_PKG_USING_SYSTEM_RUN_LED is not set
+# CONFIG_PKG_USING_BT_MX01 is not set
+# CONFIG_PKG_USING_SPI_TOOLS is not set
+
+#
+# AI packages
+#
+# CONFIG_PKG_USING_LIBANN is not set
+# CONFIG_PKG_USING_NNOM is not set
+# CONFIG_PKG_USING_ONNX_BACKEND is not set
+# CONFIG_PKG_USING_ONNX_PARSER is not set
+# CONFIG_PKG_USING_TENSORFLOWLITEMICRO is not set
+# CONFIG_PKG_USING_ELAPACK is not set
+# CONFIG_PKG_USING_ULAPACK is not set
+# CONFIG_PKG_USING_QUEST is not set
+# CONFIG_PKG_USING_NAXOS is not set
+# CONFIG_PKG_USING_R_TINYMAIX is not set
+
+#
+# Signal Processing and Control Algorithm Packages
+#
+# CONFIG_PKG_USING_FIRE_PID_CURVE is not set
+# CONFIG_PKG_USING_QPID is not set
+# CONFIG_PKG_USING_UKAL is not set
+# CONFIG_PKG_USING_DIGITALCTRL is not set
+# CONFIG_PKG_USING_KISSFFT is not set
+
+#
+# miscellaneous packages
+#
+
+#
+# project laboratory
+#
+
+#
+# samples: kernel and components samples
+#
+# CONFIG_PKG_USING_KERNEL_SAMPLES is not set
+# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
+# CONFIG_PKG_USING_NETWORK_SAMPLES is not set
+# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
+
+#
+# entertainment: terminal games and other interesting software packages
+#
+# CONFIG_PKG_USING_CMATRIX is not set
+# CONFIG_PKG_USING_SL is not set
+# CONFIG_PKG_USING_CAL is not set
+# CONFIG_PKG_USING_ACLOCK is not set
+# CONFIG_PKG_USING_THREES is not set
+# CONFIG_PKG_USING_2048 is not set
+# CONFIG_PKG_USING_SNAKE is not set
+# CONFIG_PKG_USING_TETRIS is not set
+# CONFIG_PKG_USING_DONUT is not set
+# CONFIG_PKG_USING_COWSAY is not set
+# CONFIG_PKG_USING_MORSE is not set
+# CONFIG_PKG_USING_LIBCSV is not set
+# CONFIG_PKG_USING_OPTPARSE is not set
+# CONFIG_PKG_USING_FASTLZ is not set
+# CONFIG_PKG_USING_MINILZO is not set
+# CONFIG_PKG_USING_QUICKLZ is not set
+# CONFIG_PKG_USING_LZMA is not set
+# CONFIG_PKG_USING_RALARAM is not set
+# CONFIG_PKG_USING_MULTIBUTTON is not set
+# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set
+# CONFIG_PKG_USING_CANFESTIVAL is not set
+# CONFIG_PKG_USING_ZLIB is not set
+# CONFIG_PKG_USING_MINIZIP is not set
+# CONFIG_PKG_USING_HEATSHRINK is not set
+# CONFIG_PKG_USING_DSTR is not set
+# CONFIG_PKG_USING_TINYFRAME is not set
+# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
+# CONFIG_PKG_USING_UPACKER is not set
+# CONFIG_PKG_USING_UPARAM is not set
+# CONFIG_PKG_USING_HELLO is not set
+# CONFIG_PKG_USING_VI is not set
+# CONFIG_PKG_USING_KI is not set
+# CONFIG_PKG_USING_ARMv7M_DWT is not set
+# CONFIG_PKG_USING_CRCLIB is not set
+# CONFIG_PKG_USING_LWGPS is not set
+# CONFIG_PKG_USING_STATE_MACHINE is not set
+# CONFIG_PKG_USING_DESIGN_PATTERN is not set
+# CONFIG_PKG_USING_CONTROLLER is not set
+# CONFIG_PKG_USING_PHASE_LOCKED_LOOP is not set
+# CONFIG_PKG_USING_MFBD is not set
+# CONFIG_PKG_USING_SLCAN2RTT is not set
+# CONFIG_PKG_USING_SOEM is not set
+# CONFIG_PKG_USING_QPARAM is not set
+# CONFIG_PKG_USING_CorevMCU_CLI is not set
+
+#
+# Arduino libraries
+#
+# CONFIG_PKG_USING_RTDUINO is not set
+
+#
+# Projects and Demos
+#
+# CONFIG_PKG_USING_ARDUINO_MSGQ_C_CPP_DEMO is not set
+# CONFIG_PKG_USING_ARDUINO_ULTRASOUND_RADAR is not set
+# CONFIG_PKG_USING_ARDUINO_SENSOR_KIT is not set
+# CONFIG_PKG_USING_ARDUINO_MATLAB_SUPPORT is not set
+
+#
+# Sensors
+#
+# CONFIG_PKG_USING_ARDUINO_SENSOR_DEVICE_DRIVERS is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SENSOR is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SENSORLAB is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADXL375 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VL53L0X is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VL53L1X is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VL6180X is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX31855 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX31865 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX31856 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX6675 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90614 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM9DS1 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AHTX0 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM9DS0 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP280 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADT7410 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP085 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BME680 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP9808 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP4728 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_INA219 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LTR390 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADXL345 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DHT is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP9600 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM6DS is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BNO055 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX1704X is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MMC56X3 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90393 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90395 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ICM20X is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DPS310 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HTS221 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SHT4X is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SHT31 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADXL343 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BME280 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AS726X is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AMG88XX is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AM2320 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AM2315 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LTR329_LTR303 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP085_UNIFIED is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP183 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP183_UNIFIED is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP3XX is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MS8607 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS3MDL is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90640 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MMA8451 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MSA301 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPL115A2 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BNO08X is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BNO08X_RVC is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS2MDL is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM303DLH_MAG is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LC709203F is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_CAP1188 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_CCS811 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_NAU7802 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS331 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LPS2X is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LPS35HW is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM303_ACCEL is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS3DH is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCF8591 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPL3115A2 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPR121 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPRLS is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPU6050 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCT2075 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PM25AQI is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_EMC2101 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_FXAS21002C is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SCD30 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_FXOS8700 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HMC5883_UNIFIED is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SGP30 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TMP006 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TLA202X is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TCS34725 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI7021 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI1145 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SGP40 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SHTC3 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HDC1000 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HTU21DF is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AS7341 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HTU31D is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_INA260 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TMP007_LIBRARY is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_L3GD20 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TMP117 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TSC2007 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TSL2561 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TSL2591_LIBRARY is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VCNL4040 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VEML6070 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VEML6075 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VEML7700 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_LIS3DHTR is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_DHT is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_ADXL335 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_ADXL345 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_BME280 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_BMP280 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_H3LIS331DL is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_MMA7660 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_TSL2561 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_PAJ7620 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_VL53L0X is not set
+# CONFIG_PKG_USING_SEEED_ITG3200 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_SHT31 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_HP20X is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_DRV2605L is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_BBM150 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_HMC5883L is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_LSM303DLH is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_TCS3414CS is not set
+# CONFIG_PKG_USING_SEEED_MP503 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_BMP085 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_HIGHTEMP is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_VEML6070 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_SI1145 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_SHT35 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_AT42QT1070 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_LSM6DS3 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_HDC1000 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_HM3301 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_MCP9600 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_LTC2941 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_LDC1612 is not set
+# CONFIG_PKG_USING_ARDUINO_CAPACITIVESENSOR is not set
+
+#
+# Display
+#
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_GFX_LIBRARY is not set
+# CONFIG_PKG_USING_ARDUINO_U8G2 is not set
+# CONFIG_PKG_USING_ARDUINO_TFT_ESPI is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ST7735 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SSD1306 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ILI9341 is not set
+# CONFIG_PKG_USING_SEEED_TM1637 is not set
+
+#
+# Timing
+#
+# CONFIG_PKG_USING_ARDUINO_RTCLIB is not set
+# CONFIG_PKG_USING_ARDUINO_MSTIMER2 is not set
+# CONFIG_PKG_USING_ARDUINO_TICKER is not set
+# CONFIG_PKG_USING_ARDUINO_TASKSCHEDULER is not set
+
+#
+# Data Processing
+#
+# CONFIG_PKG_USING_ARDUINO_KALMANFILTER is not set
+# CONFIG_PKG_USING_ARDUINO_ARDUINOJSON is not set
+
+#
+# Data Storage
+#
+
+#
+# Communication
+#
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PN532 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI4713 is not set
+
+#
+# Device Control
+#
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCF8574 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCA9685 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_PCF85063TP is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TPA2016 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DRV2605 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DS1841 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DS3502 is not set
+
+#
+# Other
+#
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MFRC630 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI5351 is not set
+
+#
+# Signal IO
+#
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BUSIO is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TCA8418 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP23017 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADS1X15 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AW9523 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP3008 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP4725 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BD3491FS is not set
+
+#
+# Uncategorized
+#
+CONFIG_SOC_RISCV_FAMILY_CH32=y
+CONFIG_SOC_RISCV_SERIES_CH32V3=y
+
+#
+# Hardware Drivers Config
+#
+CONFIG_SOC_CH32V307VC=y
+
+#
+# Onboard Peripheral Drivers
+#
+
+#
+# On-chip Peripheral Drivers
+#
+CONFIG_BSP_USING_GPIO=y
+CONFIG_BSP_USING_UART=y
+CONFIG_BSP_USING_UART1=y
+# CONFIG_BSP_USING_UART2 is not set
+# CONFIG_BSP_USING_UART3 is not set
+# CONFIG_BSP_USING_UART4 is not set
+# CONFIG_BSP_USING_UART5 is not set
+# CONFIG_BSP_USING_UART6 is not set
+# CONFIG_BSP_USING_UART7 is not set
+# CONFIG_BSP_USING_UART8 is not set
+# CONFIG_BSP_USING_ADC is not set
+# CONFIG_BSP_USING_DAC is not set
+# CONFIG_BSP_USING_SOFT_I2C is not set
+# CONFIG_BSP_USING_SPI is not set
+# CONFIG_BSP_USING_SOFT_SPI is not set
+# CONFIG_BSP_USING_RTC is not set
+CONFIG_LSI_VALUE=39000
+# CONFIG_BSP_USING_IWDT is not set
+# CONFIG_BSP_USING_CAN is not set
+# CONFIG_BSP_USING_TIM is not set
+
+#
+# Board extended module Drivers
+#

bsp/wch/risc-v/yd-ch32v307vct6/Kconfig

@@ -0,0 +1,21 @@
+mainmenu "RT-Thread Configuration"
+
+config BSP_DIR
+    string
+    option env="BSP_ROOT"
+    default "."
+
+config RTT_DIR
+    string
+    option env="RTT_ROOT"
+    default "../../../.."
+
+config PKGS_DIR
+    string
+    option env="PKGS_ROOT"
+    default "packages"
+
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
+source "../Libraries/Kconfig"
+source "board/Kconfig"

bsp/wch/risc-v/yd-ch32v307vct6/README.md

@@ -0,0 +1,97 @@
+# YD-CH32V307VCT6 BSP Introduction
+
+## 1 Introduction
+
+YD-CH32V307VCT6 is a RISC-V core-based development board with a maximum main frequency of 144Mhz. It delivers the best value for developers to try and get started with RISC-V architecture.
+
+This document records the execution instruction of the BSP (board support package) provided by the RT-Thread community for the CH32V307V-R1 development board.
+
+The document is covered in three parts:
+
+- Board Resources Introduction
+- Compiling
+- Quickly Get Started
+
+By reading the Quickly Get Started section developers can quickly get their hands on this BSP and run RT-Thread on the board.
+
+![board](./figures/VCC-GND-Studio-CH32V307-RISC-V-Ethernet-board.jpg)
+
+**Features**
+
+- MCU: CH32V307VCT6, main frequency 144MHz，FLASH and RAM are available for configuration.
+- LED: 2, user LEDs (blue and red).
+- Button: 3, Reset, Boot, User.
+- SPI Flash: 32M-bit serial flash memory (W25Q32).
+- I2C EEPROM: 64k-bit serial EEPROM (24C64).
+- USB: 2, Type-C.
+- Network Port: 1, 10M PHY inside.
+- SDIO: microSD connector.
+- Debug interface: SWD.
+- 8 MHz external quartz oscillator (HSE).
+- 32,768 Hz external RTC quartz oscillator (LSE).
+
+For more details about this board, please refer to: 
+- [Board YD-CH32V307VCT6 VCC-GND Studio](http://152.32.187.208:8080/yd-data/YD-CH32V307VCT6/YD-CH32V307VCT6/)
+- [CH32V307](https://www.wch.cn/products/CH32V307.html)
+- [CH32V307 official document](https://github.com/openwch/ch32v307)
+
+## 2 Compiling
+
+The BSP supports the RISC-V GCC development environment, here's the specific version information:
+
+| IDE/Compiler | Version Tested       |
+| ------------ | -------------------- |
+| GCC          | WCH RISC-V GCC 8.2.0 |
+
+## 3 Quickly Get Started
+
+### 3.1 Using Linux to compile BSP
+
+This section is about to introduce how to compile the BSP in Linux.
+
+#### 3.1.1 Compile BSP
+
+1. [Download WCH Compile Toolchain](https://github.com/NanjingQinheng/sdk-toolchain-RISC-V-GCC-WCH/releases)
+2. [Download the RT-Thread latest code](https://github.com/RT-Thread/rt-thread/archive/refs/heads/master.zip)
+3. Install SCons construction tool (similar GNU Make): sudo apt install scons
+4. Edit the variable **EXEC_PATH** in file **rtconfig.py** to point to the directory with executable WCH Compile Toolchain (file riscv-none-embed-gcc).
+5. Configure RT-Thread and hardware board: scons --menuconfig
+6. Start compilation: scons
+7. After compilation, the **rtthread.bin** file will be generated
+
+#### 3.1.2 Download
+
+1. Clone source file: git clone https://github.com/jmaselbas/wch-isp.git
+2. Compile and install :
+- cd wch-isp
+- make && sudo make install && sudo make load
+3. Use a USB cable Type-C to connect board to the PC. Hold button **BOOT0**, press briefly button **RST** and release button **BOOT0**.
+4. Check board connection:
+```sh
+wch-isp list
+0: BTVER v2.9 UID 10-46-89-26-3b-38-d4-a4 [0x1770] CH32V307VCT6
+MCU current flash size: 256 Kbyte
+```
+
+> Note that Chip Mem here is set to 256K ROM + 64K RAM (see Table 2-1 of datasheet CH32V307, and chapter 32.6 "User Option Bytes" of Reference Manual CH32V2x_V3x).
+
+5. Download firmware to board:
+```
+wch-isp -p flash ./rtthread.bin && wch-isp reset 
+```
+
+#### 3.1.3 Running Result
+
+1. Connect USB-UART converter to board:
+- board pin A9 (UART1_TX) -> converter RX
+- board pin A10 (UART1_RX) -> converter TX (optional, for enter commands)
+2. In the terminal tool, open the converter serial port (default 115200-8-1-N), and after resetting the device, you can see the output information of RT-Thread on the serial port:
+```
+ \ | /
+- RT -     Thread Operating System
+ / | \     5.1.0 build Jan  6 2024 17:12:03
+ 2006 - 2022 Copyright by RT-Thread team
+SystemClk: 144000000 Hz
+msh >
+```
+On board LEDs (red and blue) blinking.

bsp/wch/risc-v/yd-ch32v307vct6/SConscript

@@ -0,0 +1,15 @@
+# for module compiling
+import os
+Import('RTT_ROOT')
+from building import *
+
+cwd = GetCurrentDir()
+objs = []
+list = os.listdir(cwd)
+
+for d in list:
+    path = os.path.join(cwd, d)
+    if os.path.isfile(os.path.join(path, 'SConscript')):
+        objs = objs + SConscript(os.path.join(d, 'SConscript'))
+
+Return('objs')

bsp/wch/risc-v/yd-ch32v307vct6/SConstruct

@@ -0,0 +1,65 @@
+import os
+import sys
+import rtconfig
+from SCons.Script import *
+
+if os.getenv('RTT_ROOT'):
+    RTT_ROOT = os.getenv('RTT_ROOT')
+else:
+    RTT_ROOT = os.path.normpath(os.getcwd() + '/../../../..')
+
+sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
+try:
+    from building import *
+except:
+    print('Cannot found RT-Thread root directory, please check RTT_ROOT')
+    print(RTT_ROOT)
+    exit(-1)
+
+
+TARGET = 'rtthread.' + rtconfig.TARGET_EXT
+
+DefaultEnvironment(tools=[])
+env = Environment(tools = ['mingw'],
+    AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
+    CC = rtconfig.CC, CFLAGS = rtconfig.CFLAGS,
+    AR = rtconfig.AR, ARFLAGS = '-rc',
+    CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS,
+    LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
+env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
+
+if rtconfig.PLATFORM in ['iccarm']:
+    env.Replace(CCCOM = ['$CC $CFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES'])
+    env.Replace(ARFLAGS = [''])
+    env.Replace(LINKCOM = env["LINKCOM"] + ' --map project.map')
+
+Export('RTT_ROOT')
+Export('rtconfig')
+
+SDK_ROOT = os.path.abspath('./')
+
+if os.path.exists(SDK_ROOT + '/Libraries'):
+    libraries_path_prefix = SDK_ROOT + '/Libraries'
+else:
+    libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/Libraries'
+
+SDK_LIB = libraries_path_prefix
+Export('SDK_LIB')
+
+# prepare building environment
+objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False)
+
+ch32_library = 'ch32v30x_libraries'
+rtconfig.BSP_LIBRARY_TYPE = ch32_library
+
+bsp_vdir = 'build'
+library_vdir = 'build/libraries'
+
+# include libraries
+objs.extend(SConscript(os.path.join(libraries_path_prefix, ch32_library, 'SConscript'), variant_dir=library_vdir + '/ch32_library', duplicate=0))
+
+# common include drivers
+objs.extend(SConscript(os.path.join(libraries_path_prefix, 'ch32_drivers', 'SConscript'), variant_dir=library_vdir + '/ch32_drivers', duplicate=0))
+
+# make a building
+DoBuilding(TARGET, objs)

bsp/wch/risc-v/yd-ch32v307vct6/applications/SConscript

@@ -0,0 +1,15 @@
+from building import *
+import os
+
+cwd     = GetCurrentDir()
+CPPPATH = [cwd]
+src = ['main.c']
+
+group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
+
+list = os.listdir(cwd)
+for item in list:
+    if os.path.isfile(os.path.join(cwd, item, 'SConscript')):
+        group = group + SConscript(os.path.join(item, 'SConscript'))
+
+Return('group')

bsp/wch/risc-v/yd-ch32v307vct6/applications/main.c

@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2024-01-06     GSunwinder   first version
+ *
+ */
+
+#include <rtthread.h>
+#include <rtdevice.h>
+
+#include "ch32v30x.h"
+#include "board.h"
+
+/*********************************************************************
+ * @fn      main
+ *
+ * @brief   Main program.
+ *
+ * @return  none
+ */
+
+int main(void)
+{
+    printf("SystemClk: %d Hz\r\n", SystemCoreClock);
+
+    rt_pin_mode(LED_BLUE, PIN_MODE_OUTPUT);
+    rt_pin_mode(LED_RED,  PIN_MODE_OUTPUT);
+
+    while (1)
+    {
+        rt_pin_write(LED_RED,  PIN_LOW);
+        rt_pin_write(LED_BLUE, PIN_HIGH);
+        rt_thread_mdelay(1000);
+        rt_pin_write(LED_RED,  PIN_HIGH);
+        rt_pin_write(LED_BLUE, PIN_LOW);
+        rt_thread_mdelay(1000);
+    }
+}

bsp/wch/risc-v/yd-ch32v307vct6/board/Kconfig

@@ -0,0 +1,574 @@
+menu "Hardware Drivers Config"
+
+config SOC_CH32V307VC
+    bool
+    select SOC_RISCV_SERIES_CH32V3
+    select RT_USING_COMPONENTS_INIT
+    select RT_USING_USER_MAIN
+    default y
+
+menu "Onboard Peripheral Drivers"
+endmenu
+
+menu "On-chip Peripheral Drivers"
+    config BSP_USING_GPIO
+        bool "Enable GPIO"
+        select RT_USING_PIN
+        default y
+
+    menuconfig BSP_USING_UART
+        bool "Enable UART"
+        select RT_USING_SERIAL
+        default n
+
+        if BSP_USING_UART
+            config BSP_USING_UART1
+                bool "Enable UART1"
+                default n
+
+            config BSP_USING_UART2
+                bool "Enable UART2"
+                default n
+
+            config BSP_USING_UART3
+                bool "Enable UART3"
+                default n
+
+            config BSP_USING_UART4
+                bool "Enable UART4"
+                default n
+
+            config BSP_USING_UART5
+                bool "Enable UART5"
+                default n
+
+            config BSP_USING_UART6
+                bool "Enable UART6"
+                default n
+
+            config BSP_USING_UART7
+                bool "Enable UART7"
+                default n
+
+            config BSP_USING_UART8
+                bool "Enable UART8"
+                default n
+        endif
+
+    menuconfig BSP_USING_ADC
+        bool "Enable ADC"
+        select RT_USING_ADC
+        default n
+
+        if BSP_USING_ADC
+            config BSP_USING_ADC1
+                bool "Enable ADC1"
+                default n
+
+            config BSP_USING_ADC2
+                bool "Enable ADC2"
+                default n
+
+            config ADC_CHANNEL_16
+                bool "Enable ADC CHANNEL 16 (inside temperature)"
+                default n
+
+            config ADC_CHANNEL_17
+                bool "Enable ADC CHANNEL 17 (inside Verf)"
+                default n
+        endif
+
+    menuconfig BSP_USING_DAC
+        bool "Enable DAC"
+        select RT_USING_DAC
+        default n
+
+        if BSP_USING_DAC
+            config BSP_USING_DAC_CHANNEL1
+                bool "Enable DAC CHANNEL1"
+                default n
+            config BSP_USING_DAC_CHANNEL2
+                bool "Enable DAC CHANNEL2"
+                default n
+        endif
+
+    menuconfig BSP_USING_SOFT_I2C
+        bool "Enable I2C Bus"
+        select RT_USING_I2C
+        select RT_USING_I2C_BITOPS
+        select RT_USING_PIN
+        default n
+
+        if BSP_USING_SOFT_I2C
+            config BSP_USING_I2C1
+                bool "Enable I2C1 Bus (software simulation)"
+                default n
+
+                if BSP_USING_I2C1
+                    comment "Notice: PB10 --> 26; PB11 --> 27"
+
+                    config BSP_I2C1_SCL_PIN
+                        int "i2c1 SCL pin number"
+                        range 0 79
+                        default 26
+                    config BSP_I2C1_SDA_PIN
+                        int "i2c1 SDA pin number"
+                        range 0 79
+                        default 27
+                endif
+
+            config BSP_USING_I2C2
+                bool "Enable I2C2 Bus (software simulation)"
+                default n
+
+                if BSP_USING_I2C2
+                    comment "Notice: PC1 --> 33; PC0 --> 32"
+                    config BSP_I2C2_SCL_PIN
+                        int "i2c2 SCL pin number"
+                        range 0 79
+                        default 32
+                    config BSP_I2C2_SDA_PIN
+                        int "i2c2 SDA pin number"
+                        range 0 79
+                        default 33
+                endif
+        endif
+
+    menuconfig BSP_USING_SPI
+        bool "Enable SPI"
+        select RT_USING_SPI
+
+        if BSP_USING_SPI
+            config BSP_USING_SPI1
+                bool "Enable SPI1"
+                default n
+
+            config BSP_USING_SPI2
+                bool "Enable SPI2"
+                default n
+
+            config BSP_USING_SPI3
+                bool "Enable SPI3"
+                default n
+
+            if  BSP_USING_SPI3
+                config BSP_USING_SPI_FLASH
+                bool "Enable SPI Flash"
+                default n
+            endif
+
+        endif
+
+    menuconfig BSP_USING_SOFT_SPI
+        bool "Enable SOFT SPI"
+        select RT_USING_SPI_BITOPS
+
+        if BSP_USING_SOFT_SPI
+            config BSP_USING_SOFT_SPI1
+                bool "Enable SSPI1 Bus (User SPI)"
+                default n
+                if BSP_USING_SOFT_SPI1
+                    comment "Notice: PB9 --> 25; PB8 --> 24; PB7 --> 23"
+                    config BSP_S_SPI1_SCK_PIN
+                        int "sspi1 SCL pin number"
+                        range 1 79
+                        default 25
+                    config BSP_S_SPI1_MOSI_PIN
+                        int "sspi1 MISO pin number"
+                        range 1 79
+                        default 24
+                    config BSP_S_SPI1_MISO_PIN
+                        int "sspi1 MOSI pin number"
+                        range 1 79
+                        default 23
+                endif
+
+            config BSP_USING_SOFT_SPI2
+                bool "Enable SSPI2 Bus (soft SPI)"
+                default n
+                if BSP_USING_SOFT_SPI2
+                    comment "Notice: PE0 --> 64; PE1 --> 65; PE2 --> 66"
+                    config BSP_S_SPI2_SCK_PIN
+                        int "sspi2 SCL pin number"
+                        range 1 79
+                        default 64
+                    config BSP_S_SPI2_MOSI_PIN
+                        int "sspi2 MISO pin number"
+                        range 1 79
+                        default 65
+                    config BSP_S_SPI2_MISO_PIN
+                        int "sspi2 MOSI pin number"
+                        range 1 79
+                        default 66
+                endif
+        endif
+
+    menuconfig BSP_USING_RTC
+        bool "Enable RTC"
+        select RT_USING_RTC
+        default n
+
+        if BSP_USING_RTC
+            choice
+                prompt "Using clock for RTC"
+                default BSP_USING_RTC_LSI
+                
+                config BSP_USING_RTC_LSI
+                    bool "LSI"
+                    
+                config BSP_USING_RTC_LSE
+                    bool "LSE"
+                    
+                config BSP_USING_RTC_HSE_128
+                    bool "HSE div 128"
+                    
+            endchoice
+        endif
+
+    config LSI_VALUE
+        int
+        default 39000
+
+    config BSP_USING_IWDT
+        bool "Enable IWDT"
+        select RT_USING_WDT
+        default n
+
+    menuconfig BSP_USING_CAN
+            bool "Enable CAN"
+            default n
+            select RT_USING_CAN
+            if BSP_USING_CAN
+                config BSP_USING_CAN1
+                    bool "Using CAN1"
+                    default n
+                config BSP_USING_CAN2
+                    bool "Using CAN2"
+                    default n
+            endif
+
+    config BSP_USING_TIM
+        bool "Using TIMx"
+        default n
+
+        if BSP_USING_TIM
+            config BSP_USING_HWTIMER
+                bool
+                select RT_USING_HWTIMER
+                default n
+
+            config BSP_USING_PWM
+                bool
+                select RT_USING_PWM
+                default n
+
+            config BSP_USING_TIM1
+                bool "using TIM1"
+                default n
+
+                if BSP_USING_TIM1
+                    config BSP_USING_TIM1_HWTIMER
+                        bool "Using TIM1 as hwtimer mode"
+                        select BSP_USING_HWTIMER
+
+                    config BSP_USING_TIM1_PWM
+                        bool "Using TIM1 as PWM mode"
+                        select BSP_USING_PWM
+
+                    if BSP_USING_TIM1_PWM
+                        config BSP_USING_TIM1_PWM_CH1
+                            bool "Using TIM1 channel 1"
+                            default n
+
+                        config BSP_USING_TIM1_PWM_CH2
+                            bool "Using TIM1 channel 2"
+                            default n
+
+                        config BSP_USING_TIM1_PWM_CH3
+                            bool "Using TIM1 channel 3"
+
+                        config BSP_USING_TIM1_PWM_CH4
+                            bool "Using TIM1 channel 4"
+                    endif
+
+                    if BSP_USING_TIM1_HWTIMER && BSP_USING_TIM1_PWM
+                        comment "BSP_USING_TIM1_HWTIMER and BSP_USING_TIM1_PWM can only be chosen for one!"
+                    endif
+
+                endif
+
+            config BSP_USING_TIM2
+                    bool "Using TIM2"
+                    default n
+
+                if BSP_USING_TIM2
+                    config BSP_USING_TIM2_HWTIMER
+                        bool "Using TIM2 as hwtimer mode"
+                        select BSP_USING_HWTIMER
+
+                    config BSP_USING_TIM2_PWM
+                        bool "Using TIM2 as PWM mode"
+                        select BSP_USING_PWM
+
+                    if BSP_USING_TIM2_PWM
+                        config BSP_USING_TIM2_PWM_CH1
+                            bool "Using TIM2 channel 1"
+                            default n
+
+                        config BSP_USING_TIM2_PWM_CH2
+                            bool "Using TIM2 channel 2"
+                            default n
+
+                        config BSP_USING_TIM2_PWM_CH3
+                            bool "Using TIM2 channel 3"
+
+                        config BSP_USING_TIM2_PWM_CH4
+                            bool "Using TIM2 channel 4"
+                    endif
+
+                    if BSP_USING_TIM2_HWTIMER && BSP_USING_TIM2_PWM
+                        comment "BSP_USING_TIM2_HWTIMER and BSP_USING_TIM2_PWM can only be chosen for one!"
+                    endif
+
+                endif
+
+            config BSP_USING_TIM3
+                    bool "Using TIM3"
+                    default n
+
+                if BSP_USING_TIM3
+                    config BSP_USING_TIM3_HWTIMER
+                        bool "Using TIM3 as hwtimer mode"
+                        select BSP_USING_HWTIMER
+
+                    config BSP_USING_TIM3_PWM
+                        bool "Using TIM3 as PWM mode"
+                        select BSP_USING_PWM
+
+                    if BSP_USING_TIM3_PWM
+                        config BSP_USING_TIM3_PWM_CH1
+                            bool "Using TIM3 channel 1"
+                            default n
+
+                        config BSP_USING_TIM3_PWM_CH2
+                            bool "Using TIM3 channel 2"
+                            default n
+
+                        config BSP_USING_TIM3_PWM_CH3
+                            bool "Using TIM3 channel 3"
+
+                        config BSP_USING_TIM3_PWM_CH4
+                            bool "Using TIM3 channel 4"
+                    endif
+
+                    if BSP_USING_TIM3_HWTIMER && BSP_USING_TIM3_PWM
+                        comment "BSP_USING_TIM3_HWTIMER and BSP_USING_TIM3_PWM can only be chosen for one!"
+                    endif
+
+                endif
+
+            config BSP_USING_TIM4
+                    bool "Using TIM4"
+                    default n
+
+                if BSP_USING_TIM4
+                    config BSP_USING_TIM4_HWTIMER
+                        bool "Using TIM4 as hwtimer mode"
+                        select BSP_USING_HWTIMER
+
+                    config BSP_USING_TIM4_PWM
+                        bool "Using TIM4 as PWM mode"
+                        select BSP_USING_PWM
+
+                    if BSP_USING_TIM4_PWM
+                        config BSP_USING_TIM4_PWM_CH1
+                            bool "Using TIM4 channel 1"
+                            default n
+
+                        config BSP_USING_TIM4_PWM_CH2
+                            bool "Using TIM4 channel 2"
+                            default n
+
+                        config BSP_USING_TIM4_PWM_CH3
+                            bool "Using TIM4 channel 3"
+
+                        config BSP_USING_TIM4_PWM_CH4
+                            bool "Using TIM4 channel 4"
+                    endif
+
+                    if BSP_USING_TIM4_HWTIMER && BSP_USING_TIM4_PWM
+                        comment "BSP_USING_TIM4_HWTIMER and BSP_USING_TIM4_PWM can only be chosen for one!"
+                    endif
+
+                endif
+
+            config BSP_USING_TIM5
+                    bool "Using TIM5"
+                    default n
+
+                if BSP_USING_TIM5
+                    config BSP_USING_TIM5_HWTIMER
+                        bool "Using TIM5 as hwtimer mode"
+                        select BSP_USING_HWTIMER
+
+                    config BSP_USING_TIM5_PWM
+                        bool "Using TIM5 as PWM mode"
+                        select BSP_USING_PWM
+
+                    if BSP_USING_TIM5_PWM
+                        config BSP_USING_TIM5_PWM_CH1
+                            bool "Using TIM5 channel 1"
+                            default n
+
+                        config BSP_USING_TIM5_PWM_CH2
+                            bool "Using TIM5 channel 2"
+                            default n
+
+                        config BSP_USING_TIM5_PWM_CH3
+                            bool "Using TIM5 channel 3"
+
+                        config BSP_USING_TIM5_PWM_CH4
+                            bool "Using TIM5 channel 4"
+                    endif
+
+                    if BSP_USING_TIM5_HWTIMER && BSP_USING_TIM5_PWM
+                        comment "BSP_USING_TIM5_HWTIMER and BSP_USING_TIM5_PWM can only be chosen for one!"
+                    endif
+
+                endif
+
+            config BSP_USING_TIM6
+                    bool "Using TIM6"
+                    default n
+
+                if BSP_USING_TIM6
+                    config BSP_USING_TIM6_HWTIMER
+                        bool "Using TIM6 as hwtimer mode"
+                        select BSP_USING_HWTIMER
+                endif
+
+            config BSP_USING_TIM7
+                    bool "Using TIM7"
+                    default n
+
+                if BSP_USING_TIM7
+                    config BSP_USING_TIM7_HWTIMER
+                        bool "Using TIM7 as hwtimer mode"
+                        select BSP_USING_HWTIMER
+                endif
+
+            config BSP_USING_TIM8
+                    bool "Using TIM8"
+                    default n
+
+                if BSP_USING_TIM8
+                    config BSP_USING_TIM8_HWTIMER
+                        bool "Using TIM8 as hwtimer mode"
+                        select BSP_USING_HWTIMER
+
+                    config BSP_USING_TIM8_PWM
+                        bool "Using TIM8 as PWM mode"
+                        select BSP_USING_PWM
+
+                    if BSP_USING_TIM8_PWM
+                        config BSP_USING_TIM8_PWM_CH1
+                            bool "Using TIM8 channel 1"
+                            default n
+
+                        config BSP_USING_TIM8_PWM_CH2
+                            bool "Using TIM8 channel 2"
+                            default n
+
+                        config BSP_USING_TIM8_PWM_CH3
+                            bool "Using TIM8 channel 3"
+
+                        config BSP_USING_TIM8_PWM_CH4
+                            bool "Using TIM8 channel 4"
+                    endif
+
+                    if BSP_USING_TIM8_HWTIMER && BSP_USING_TIM8_PWM
+                        comment "BSP_USING_TIM8_HWTIMER and BSP_USING_TIM8_PWM can only be chosen for one!"
+                    endif
+
+                endif
+
+            config BSP_USING_TIM9
+                    bool "Using TIM9"
+                    default n
+
+                if BSP_USING_TIM9
+                    config BSP_USING_TIM9_HWTIMER
+                        bool "Using TIM9 as hwtimer mode"
+                        select BSP_USING_HWTIMER
+
+                    config BSP_USING_TIM9_PWM
+                        bool "Using TIM9 as PWM mode"
+                        select BSP_USING_PWM
+
+                    if BSP_USING_TIM9_PWM
+                        config BSP_USING_TIM9_PWM_CH1
+                            bool "Using TIM9 channel 1"
+                            default n
+
+                        config BSP_USING_TIM9_PWM_CH2
+                            bool "Using TIM9 channel 2"
+                            default n
+
+                        config BSP_USING_TIM9_PWM_CH3
+                            bool "Using TIM9 channel 3"
+
+                        config BSP_USING_TIM9_PWM_CH4
+                            bool "Using TIM9 channel 4"
+                    endif
+
+                    if BSP_USING_TIM9_HWTIMER && BSP_USING_TIM9_PWM
+                        comment "BSP_USING_TIM9_HWTIMER and BSP_USING_TIM9_PWM can only be chosen for one!"
+                    endif
+
+                endif
+
+            config BSP_USING_TIM10
+                    bool "Using TIM10"
+                    default n
+
+                if BSP_USING_TIM10
+                    config BSP_USING_TIM10_HWTIMER
+                        bool "Using TIM10 as hwtimer mode"
+                        select BSP_USING_HWTIMER
+
+                    config BSP_USING_TIM10_PWM
+                        bool "Using TIM10 as PWM mode"
+                        select BSP_USING_PWM
+
+                    if BSP_USING_TIM10_PWM
+                        config BSP_USING_TIM10_PWM_CH1
+                            bool "Using TIM10 channel 1"
+                            default n
+
+                        config BSP_USING_TIM10_PWM_CH2
+                            bool "Using TIM10 channel 2"
+                            default n
+
+                        config BSP_USING_TIM10_PWM_CH3
+                            bool "Using TIM10 channel 3"
+
+                        config BSP_USING_TIM10_PWM_CH4
+                            bool "Using TIM10 channel 4"
+                    endif
+
+                    if BSP_USING_TIM10_HWTIMER && BSP_USING_TIM10_PWM
+                        comment "BSP_USING_TIM10_HWTIMER and BSP_USING_TIM10_PWM can only be chosen for one!"
+                    endif
+
+                endif
+
+        endif
+
+endmenu
+
+menu "Board extended module Drivers"
+
+endmenu
+
+endmenu
+

bsp/wch/risc-v/yd-ch32v307vct6/board/SConscript

@@ -0,0 +1,18 @@
+import os
+import rtconfig
+from building import *
+
+Import('SDK_LIB')
+
+cwd = GetCurrentDir()
+
+# add general drivers
+src = Split('''
+board.c
+software_irq.c
+''')
+
+path =  [cwd]
+
+group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path)
+Return('group')

bsp/wch/risc-v/yd-ch32v307vct6/board/board.c

@@ -0,0 +1,74 @@
+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2022-08-23     liYony       first version
+ */
+
+#include "board.h"
+#include <stdint.h>
+#include "drv_usart.h"
+#include <rthw.h>
+#include <rtthread.h>
+
+extern uint32_t SystemCoreClock;
+
+static uint32_t _SysTick_Config(rt_uint32_t ticks)
+{
+    NVIC_SetPriority(SysTicK_IRQn, 0xf0);
+    NVIC_SetPriority(Software_IRQn, 0xf0);
+    NVIC_EnableIRQ(SysTicK_IRQn);
+    NVIC_EnableIRQ(Software_IRQn);
+    SysTick->CTLR = 0;
+    SysTick->SR = 0;
+    SysTick->CNT = 0;
+    SysTick->CMP = ticks - 1;
+    SysTick->CTLR = 0xF;
+    return 0;
+}
+
+/**
+ * This function will initial your board.
+ */
+void rt_hw_board_init()
+{
+    /* System Tick Configuration */
+    _SysTick_Config(SystemCoreClock / RT_TICK_PER_SECOND);
+
+#if defined(RT_USING_USER_MAIN) && defined(RT_USING_HEAP)
+    rt_system_heap_init((void *) HEAP_BEGIN, (void *) HEAP_END);
+#endif
+
+    /* USART driver initialization is open by default */
+#ifdef RT_USING_SERIAL
+    rt_hw_usart_init();
+#endif
+#ifdef RT_USING_CONSOLE
+    rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
+#endif
+#ifdef RT_USING_PIN
+    /* pin must initialized before i2c */
+    rt_hw_pin_init();
+#endif
+    /* Call components board initial (use INIT_BOARD_EXPORT()) */
+#ifdef RT_USING_COMPONENTS_INIT
+    rt_components_board_init();
+#endif
+}
+
+void SysTick_Handler(void) __attribute__((interrupt("WCH-Interrupt-fast")));
+void SysTick_Handler(void)
+{
+    GET_INT_SP();
+    /* enter interrupt */
+    rt_interrupt_enter();
+    SysTick->SR = 0;
+    rt_tick_increase();
+    /* leave interrupt */
+    rt_interrupt_leave();
+    FREE_INT_SP();
+
+}

bsp/wch/risc-v/yd-ch32v307vct6/board/board.h

@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2006-2024, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2022-08-23     liYony       first version
+ * 2024-01-06     GSunwinder   add define LED pins
+ */
+
+/* <<< Use Configuration Wizard in Context Menu >>> */
+#ifndef __BOARD_H__
+#define __BOARD_H__
+
+#include <rtthread.h>
+#include "ch32v30x.h"
+#include "drv_gpio.h"
+#include "drv_pwm.h"
+
+/* board configuration */
+#define SRAM_SIZE  64
+#define SRAM_END (0x20000000 + SRAM_SIZE * 1024)
+
+extern int _ebss, _susrstack;
+#define HEAP_BEGIN  ((void *)&_ebss)
+#define HEAP_END    ((void *)&_susrstack)
+
+/* defined the LED pin */
+#define LED_BLUE              rt_pin_get("PB.4")
+#define LED_RED               rt_pin_get("PA.15")
+
+
+void rt_hw_board_init(void);
+
+#endif /* __BOARD_H__ */

bsp/wch/risc-v/yd-ch32v307vct6/board/linker_scripts/link.lds

@@ -0,0 +1,209 @@
+ENTRY( _start )
+
+__stack_size = 2048;
+
+PROVIDE( _stack_size = __stack_size );
+
+
+MEMORY
+{
+    FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 256K
+    RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 64K
+}
+
+
+SECTIONS
+{
+
+    .init :
+    {
+        _sinit = .;
+        . = ALIGN(4);
+        KEEP(*(SORT_NONE(.init)))
+        . = ALIGN(4);
+        _einit = .;
+    } >FLASH AT>FLASH
+
+    .vector :
+    {
+        *(.vector);
+        . = ALIGN(64);
+    } >FLASH AT>FLASH
+
+    .text :
+    {
+        . = ALIGN(4);
+        *(.text)
+        *(.text.*)
+        *(.rodata)
+        *(.rodata*)
+        *(.glue_7)
+        *(.glue_7t)
+        *(.gnu.linkonce.t.*)
+
+         /* section information for finsh shell */
+        . = ALIGN(4);
+        __fsymtab_start = .;
+        KEEP(*(FSymTab))
+        __fsymtab_end = .;
+        . = ALIGN(4);
+        __vsymtab_start = .;
+        KEEP(*(VSymTab))
+        __vsymtab_end = .;
+        . = ALIGN(4);
+
+        /* section information for initial. */
+        . = ALIGN(4);
+        __rt_init_start = .;
+        KEEP(*(SORT(.rti_fn*)))
+        __rt_init_end = .;
+        . = ALIGN(4);
+
+        /* section information for modules */
+        . = ALIGN(4);
+        __rtmsymtab_start = .;
+        KEEP(*(RTMSymTab))
+        __rtmsymtab_end = .;
+            . = ALIGN(4);
+
+        /* section information for initial. */
+        . = ALIGN(4);
+        __rt_init_start = .;
+        KEEP(*(SORT(.rti_fn*)))
+        __rt_init_end = .;
+
+        . = ALIGN(4);
+
+        PROVIDE(__ctors_start__ = .);
+        KEEP (*(SORT(.init_array.*)))
+        KEEP (*(.init_array))
+        PROVIDE(__ctors_end__ = .);
+
+        . = ALIGN(4);
+
+        _etext = .;
+
+    } >FLASH AT>FLASH
+
+    .fini :
+    {
+        KEEP(*(SORT_NONE(.fini)))
+        . = ALIGN(4);
+    } >FLASH AT>FLASH
+
+    PROVIDE( _etext = . );
+    PROVIDE( _eitcm = . );
+
+    .preinit_array  :
+    {
+      PROVIDE_HIDDEN (__preinit_array_start = .);
+      KEEP (*(.preinit_array))
+      PROVIDE_HIDDEN (__preinit_array_end = .);
+    } >FLASH AT>FLASH
+
+    .init_array     :
+    {
+      PROVIDE_HIDDEN (__init_array_start = .);
+      KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+      KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+      PROVIDE_HIDDEN (__init_array_end = .);
+    } >FLASH AT>FLASH
+
+    .fini_array     :
+    {
+      PROVIDE_HIDDEN (__fini_array_start = .);
+      KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+      KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+      PROVIDE_HIDDEN (__fini_array_end = .);
+    } >FLASH AT>FLASH
+
+    .ctors          :
+    {
+      /* gcc uses crtbegin.o to find the start of
+         the constructors, so we make sure it is
+         first.  Because this is a wildcard, it
+         doesn't matter if the user does not
+         actually link against crtbegin.o; the
+         linker won't look for a file to match a
+         wildcard.  The wildcard also means that it
+         doesn't matter which directory crtbegin.o
+         is in.  */
+      KEEP (*crtbegin.o(.ctors))
+      KEEP (*crtbegin?.o(.ctors))
+      /* We don't want to include the .ctor section from
+         the crtend.o file until after the sorted ctors.
+         The .ctor section from the crtend file contains the
+         end of ctors marker and it must be last */
+      KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+      KEEP (*(SORT(.ctors.*)))
+      KEEP (*(.ctors))
+    } >FLASH AT>FLASH
+
+    .dtors          :
+    {
+      KEEP (*crtbegin.o(.dtors))
+      KEEP (*crtbegin?.o(.dtors))
+      KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+      KEEP (*(SORT(.dtors.*)))
+      KEEP (*(.dtors))
+    } >FLASH AT>FLASH
+
+    .dalign :
+    {
+        . = ALIGN(4);
+        PROVIDE(_data_vma = .);
+    } >RAM AT>FLASH
+
+    .dlalign :
+    {
+        . = ALIGN(4);
+        PROVIDE(_data_lma = .);
+    } >FLASH AT>FLASH
+
+    .data :
+    {
+        *(.gnu.linkonce.r.*)
+        *(.data .data.*)
+        *(.gnu.linkonce.d.*)
+        . = ALIGN(8);
+        PROVIDE( __global_pointer$ = . + 0x800 );
+        *(.sdata .sdata.*)
+        *(.sdata2.*)
+        *(.gnu.linkonce.s.*)
+        . = ALIGN(8);
+        *(.srodata.cst16)
+        *(.srodata.cst8)
+        *(.srodata.cst4)
+        *(.srodata.cst2)
+        *(.srodata .srodata.*)
+        . = ALIGN(4);
+        PROVIDE( _edata = .);
+    } >RAM AT>FLASH
+
+    .bss :
+    {
+        . = ALIGN(4);
+        PROVIDE( _sbss = .);
+        *(.sbss*)
+        *(.gnu.linkonce.sb.*)
+        *(.bss*)
+        *(.gnu.linkonce.b.*)
+        *(COMMON*)
+        . = ALIGN(4);
+        PROVIDE( _ebss = .);
+    } >RAM AT>FLASH
+
+    PROVIDE( _end = _ebss);
+    PROVIDE( end = . );
+
+    .stack ORIGIN(RAM) + LENGTH(RAM) - __stack_size :
+    {
+        PROVIDE( _heap_end = . );
+        . = ALIGN(4);
+        PROVIDE(_susrstack = . );
+        . = . + __stack_size;
+        PROVIDE( _eusrstack = .);
+        PROVIDE( __rt_rvstack = . );
+    } >RAM
+
+}

bsp/wch/risc-v/yd-ch32v307vct6/board/software_irq.c

@@ -0,0 +1,41 @@
+/*
+ * Copyright (c) 2006-2024, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2021-09-09     WCH        the first version
+ * 2023-01-04     WangShun   Remove redundant files
+ */
+#include "rtconfig.h"
+#if defined (SOC_RISCV_SERIES_CH32V1)
+#include "ch32v10x.h"
+#elif defined (SOC_RISCV_SERIES_CH32V2)
+#include "ch32v20x.h"
+#elif defined (SOC_RISCV_SERIES_CH32V3)
+#include "ch32v30x.h"
+#else
+#error "CH32 architecture doesn't support!"
+#endif
+void rt_trigger_software_interrupt(void)
+{
+    /*CH32V103 does not support systick software interrupt*/
+#if defined(SOC_RISCV_SERIES_CH32V1)
+    NVIC_SetPendingIRQ(Software_IRQn);
+#else
+    SysTick->CTLR |= (1 << 31);
+#endif
+}
+
+void rt_hw_do_after_save_above(void)
+{
+    __asm volatile ("li t0,0x20" );
+    __asm volatile ("csrs 0x804, t0");
+    /*CH32V103 does not support systick software interrupt*/
+#if defined(SOC_RISCV_SERIES_CH32V1)
+    NVIC_ClearPendingIRQ(Software_IRQn);
+#else
+    SysTick->CTLR &= ~(1 << 31);
+#endif
+}

bsp/wch/risc-v/yd-ch32v307vct6/rtconfig.h

@@ -0,0 +1,262 @@
+#ifndef RT_CONFIG_H__
+#define RT_CONFIG_H__
+
+/* Automatically generated file; DO NOT EDIT. */
+/* RT-Thread Configuration */
+
+/* RT-Thread Kernel */
+
+#define RT_NAME_MAX 8
+#define RT_CPUS_NR 1
+#define RT_ALIGN_SIZE 8
+#define RT_THREAD_PRIORITY_32
+#define RT_THREAD_PRIORITY_MAX 32
+#define RT_TICK_PER_SECOND 1000
+#define RT_USING_OVERFLOW_CHECK
+#define RT_USING_HOOK
+#define RT_HOOK_USING_FUNC_PTR
+#define RT_USING_IDLE_HOOK
+#define RT_IDLE_HOOK_LIST_SIZE 4
+#define IDLE_THREAD_STACK_SIZE 512
+#define RT_USING_TIMER_SOFT
+#define RT_TIMER_THREAD_PRIO 4
+#define RT_TIMER_THREAD_STACK_SIZE 512
+
+/* kservice optimization */
+
+#define RT_USING_DEBUG
+#define RT_DEBUGING_COLOR
+#define RT_DEBUGING_CONTEXT
+
+/* Inter-Thread communication */
+
+#define RT_USING_SEMAPHORE
+#define RT_USING_MUTEX
+#define RT_USING_EVENT
+#define RT_USING_MAILBOX
+#define RT_USING_MESSAGEQUEUE
+
+/* Memory Management */
+
+#define RT_USING_SMALL_MEM
+#define RT_USING_SMALL_MEM_AS_HEAP
+#define RT_USING_HEAP
+#define RT_USING_DEVICE
+#define RT_USING_CONSOLE
+#define RT_CONSOLEBUF_SIZE 128
+#define RT_CONSOLE_DEVICE_NAME "uart1"
+#define RT_VER_NUM 0x50100
+#define RT_BACKTRACE_LEVEL_MAX_NR 32
+#define RT_USING_HW_ATOMIC
+#define ARCH_RISCV
+
+/* RT-Thread Components */
+
+#define RT_USING_COMPONENTS_INIT
+#define RT_USING_USER_MAIN
+#define RT_MAIN_THREAD_STACK_SIZE 2048
+#define RT_MAIN_THREAD_PRIORITY 10
+#define RT_USING_MSH
+#define RT_USING_FINSH
+#define FINSH_USING_MSH
+#define FINSH_THREAD_NAME "tshell"
+#define FINSH_THREAD_PRIORITY 20
+#define FINSH_THREAD_STACK_SIZE 1024
+#define FINSH_USING_HISTORY
+#define FINSH_HISTORY_LINES 5
+#define FINSH_USING_SYMTAB
+#define FINSH_CMD_SIZE 80
+#define MSH_USING_BUILT_IN_COMMANDS
+#define FINSH_USING_DESCRIPTION
+#define FINSH_ARG_MAX 10
+#define FINSH_USING_OPTION_COMPLETION
+
+/* DFS: device virtual file system */
+
+
+/* Device Drivers */
+
+#define RT_USING_DEVICE_IPC
+#define RT_UNAMED_PIPE_NUMBER 64
+#define RT_USING_SERIAL
+#define RT_USING_SERIAL_V1
+#define RT_SERIAL_RB_BUFSZ 64
+#define RT_USING_PIN
+
+/* Using USB */
+
+
+/* C/C++ and POSIX layer */
+
+/* ISO-ANSI C layer */
+
+/* Timezone and Daylight Saving Time */
+
+#define RT_LIBC_USING_LIGHT_TZ_DST
+#define RT_LIBC_TZ_DEFAULT_HOUR 8
+#define RT_LIBC_TZ_DEFAULT_MIN 0
+#define RT_LIBC_TZ_DEFAULT_SEC 0
+
+/* POSIX (Portable Operating System Interface) layer */
+
+
+/* Interprocess Communication (IPC) */
+
+
+/* Socket is in the 'Network' category */
+
+
+/* Network */
+
+
+/* Memory protection */
+
+
+/* Utilities */
+
+
+/* RT-Thread Utestcases */
+
+
+/* RT-Thread online packages */
+
+/* IoT - internet of things */
+
+
+/* Wi-Fi */
+
+/* Marvell WiFi */
+
+
+/* Wiced WiFi */
+
+
+/* CYW43012 WiFi */
+
+
+/* BL808 WiFi */
+
+
+/* CYW43439 WiFi */
+
+
+/* IoT Cloud */
+
+
+/* security packages */
+
+
+/* language packages */
+
+/* JSON: JavaScript Object Notation, a lightweight data-interchange format */
+
+
+/* XML: Extensible Markup Language */
+
+
+/* multimedia packages */
+
+/* LVGL: powerful and easy-to-use embedded GUI library */
+
+
+/* u8g2: a monochrome graphic library */
+
+
+/* tools packages */
+
+
+/* system packages */
+
+/* enhanced kernel services */
+
+
+/* acceleration: Assembly language or algorithmic acceleration packages */
+
+
+/* CMSIS: ARM Cortex-M Microcontroller Software Interface Standard */
+
+
+/* Micrium: Micrium software products porting for RT-Thread */
+
+
+/* peripheral libraries and drivers */
+
+/* sensors drivers */
+
+
+/* touch drivers */
+
+
+/* Kendryte SDK */
+
+
+/* AI packages */
+
+
+/* Signal Processing and Control Algorithm Packages */
+
+
+/* miscellaneous packages */
+
+/* project laboratory */
+
+/* samples: kernel and components samples */
+
+
+/* entertainment: terminal games and other interesting software packages */
+
+
+/* Arduino libraries */
+
+
+/* Projects and Demos */
+
+
+/* Sensors */
+
+
+/* Display */
+
+
+/* Timing */
+
+
+/* Data Processing */
+
+
+/* Data Storage */
+
+/* Communication */
+
+
+/* Device Control */
+
+
+/* Other */
+
+
+/* Signal IO */
+
+
+/* Uncategorized */
+
+#define SOC_RISCV_FAMILY_CH32
+#define SOC_RISCV_SERIES_CH32V3
+
+/* Hardware Drivers Config */
+
+#define SOC_CH32V307VC
+
+/* Onboard Peripheral Drivers */
+
+/* On-chip Peripheral Drivers */
+
+#define BSP_USING_GPIO
+#define BSP_USING_UART
+#define BSP_USING_UART1
+#define LSI_VALUE 39000
+
+/* Board extended module Drivers */
+
+
+#endif

bsp/wch/risc-v/yd-ch32v307vct6/rtconfig.py

@@ -0,0 +1,70 @@
+import os
+ARCH     = 'risc-v'
+CPU      = 'ch32'
+# toolchains options
+CROSS_TOOL  = 'gcc'
+
+#------- toolchains path -------------------------------------------------------
+if os.getenv('RTT_CC'):
+    CROSS_TOOL = os.getenv('RTT_CC')
+
+if  CROSS_TOOL == 'gcc':
+    PLATFORM    = 'gcc'
+    EXEC_PATH   = r'/opt/MRS_Toolchain_Linux_x64_V1.90/RISC-V_Embedded_GCC/bin/'
+else:
+    print('Please make sure your toolchains is GNU GCC!')
+    exit(0)
+	
+if os.getenv('RTT_EXEC_PATH'):
+    EXEC_PATH = os.getenv('RTT_EXEC_PATH')
+
+BUILD = 'debug'
+#BUILD = 'release'
+
+CORE = 'risc-v'
+MAP_FILE = 'rtthread.map'
+LINK_FILE = './board/linker_scripts/link.lds'
+TARGET_NAME = 'rtthread.bin'
+
+#------- GCC settings ----------------------------------------------------------
+if PLATFORM == 'gcc':
+    # toolchains
+    PREFIX = 'riscv-none-embed-'
+    CC = PREFIX + 'gcc'
+    CXX= PREFIX + 'g++'
+    AS = PREFIX + 'gcc'
+    AR = PREFIX + 'ar'
+    LINK = PREFIX + 'gcc'
+    TARGET_EXT = 'elf'
+    SIZE = PREFIX + 'size'
+    OBJDUMP = PREFIX + 'objdump'
+    OBJCPY = PREFIX + 'objcopy'
+
+    DEVICE = ' -march=rv32imac -mabi=ilp32 -DUSE_PLIC -DUSE_M_TIME -DNO_INIT -mcmodel=medany -msmall-data-limit=8 -L.  -nostartfiles  -lc '
+    CFLAGS = DEVICE
+    CFLAGS += ' -save-temps=obj'
+    AFLAGS = '-c'+ DEVICE + ' -x assembler-with-cpp'
+    LFLAGS = DEVICE
+    LFLAGS += ' -Wl,--gc-sections,-cref,-Map=' + MAP_FILE
+    LFLAGS += ' -T ' + LINK_FILE
+    AFLAGS += ' -I.'
+    CPATH = ''
+    LPATH = ''
+
+    if BUILD == 'debug':
+        CFLAGS += ' -O0 -g3'
+        AFLAGS += ' -g3'
+    else:
+        CFLAGS += ' -O2'
+
+    CXXFLAGS = CFLAGS
+
+    POST_ACTION = OBJCPY + ' -O binary $TARGET ' + TARGET_NAME + '\n'
+    POST_ACTION += SIZE + ' $TARGET\n'
+
+def dist_handle(BSP_ROOT, dist_dir):
+    import sys
+    cwd_path = os.getcwd()
+    sys.path.append(os.path.join(os.path.dirname(BSP_ROOT), 'tools'))
+    from sdk_dist import dist_do_building
+    dist_do_building(BSP_ROOT, dist_dir)