[RTduino]stm32f401-st-nucleo 更新对接文件

bsp/stm32/stm32f103-blue-pill/applications/arduino_pinout/README_zh.md

@@ -54,8 +54,8 @@ Hardware Drivers Config --->
 | 29 (A2)     | PA5       | 否    | ADC1-CH5，默认被RT-Thread的ADC设备框架adc1接管                                       |
 | 30 (A3)     | PA6       | 否    | ADC1-CH6，默认被RT-Thread的ADC设备框架adc1接管                                       |
 | 31 (A4)     | PA7       | 否    | ADC1-CH7，默认被RT-Thread的ADC设备框架adc1接管                                       |
-| 32 (A5)     | --        |      | 芯片内部参考电压 ADC，默认被RT-Thread的ADC设备框架adc1接管                                   |
-| 33 (A6)     | --        |      | 芯片内部温度 ADC                                                                |
+| 32 (A5)     | --        |      | 芯片内部参考电压 ADC，默认被RT-Thread的ADC设备框架adc1接管                             |
+| 33 (A6)     | --        |      | 芯片内部温度 ADC，默认被RT-Thread的ADC设备框架adc1接管                                 |
 
 > 注意：
 > 

bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/README.md

@@ -20,33 +20,33 @@ Hardware Drivers Config --->
 
 该BSP遵照Arduino UNO板的引脚排列方式。详见 `pins_arduino.c`
 
-| Arduino引脚编号 | STM32引脚编号 | 5V容忍 | 备注                                                         |
-| --------------- | ------------- | ------ | ------------------------------------------------------------ |
-| 0 (D0)          | --            |        | 该引脚在UNO板中为串口RX引脚，不可当做普通IO                  |
-| 1 (D1)          | --            |        | 该引脚在UNO板中为串口TX引脚，不可当做普通IO                  |
-| 2 (D2)          | PA10          | 是     |                                                              |
-| 3 (D3)          | PB3           | 是     | PWM（定时器2发生）                                           |
-| 4 (D4)          | PB5           | 是     |                                                              |
-| 5 (D5)          | PB4           | 是     | PWM（定时器3发生）                                           |
-| 6 (D6)          | PB10          | 是     | PWM（定时器2发生）                                           |
-| 7 (D7)          | PA8           | 是     |                                                              |
-| 8 (D8)          | PA9           | 是     |                                                              |
-| 9 (D9)          | PC7           | 是     | PWM（定时器3发生）                                           |
-| 10 (D10)        | PB6           | 是     | PWM（定时器4发生） |
-| 11 (D11)        | PA7           | 是     | PWM（定时器1发生） |
-| 12 (D12)        | PA6           | 是     |  |
-| 13 (D13)        | PA5           | 是     | |
-| 14 (D14)        | PB9           | 是     | I2C1-SDA，被RT-Thread的I2C设备框架i2c1总线接管，不可当做普通IO |
-| 15 (D15)        | PB8           | 是     | I2C1_SCL，被RT-Thread的I2C设备框架i2c1总线接管，不可当做普通IO |
-| 16 (D16)        | PC13          | 是     | Nucleo板载用户按键（左侧蓝色）                               |
-| A0              | PA0           | 是     | ADC                                                          |
-| A1              | PA1           | 是     | ADC                                                          |
-| A2              | PA4           | 是     | ADC                                                          |
-| A3              | PB0           | 是     | ADC                                                          |
-| A4              | PC1           | 是     | ADC                                                          |
-| A5              | PC0           | 是     | ADC                                                          |
-| A6              | --            |        | 芯片内部参考电压 ADC                                         |
-| A7              | --            |        | 芯片内部温度 ADC                                             |
+| Arduino引脚编号 | STM32引脚编号 | 5V容忍 | 备注                                                       |
+| --------------- | ------------- | ------ | -------------------------------------------------------- |
+| 0 (D0)          | --            |        | UART2-RX，默认被RT-Thread的UART设备框架uart2接管           |
+| 1 (D1)          | --            |        | UART2-TX，默认被RT-Thread的UART设备框架uart2接管           |
+| 2 (D2)          | PA10          | 是     |                                                          |
+| 3 (D3)          | PB3           | 是     | PWM2-CH2，默认被RT-Thread的PWM设备框架pwm2接管             |
+| 4 (D4)          | PB5           | 是     |                                                          |
+| 5 (D5)          | PB4           | 是     | PWM3-CH1，默认被RT-Thread的PWM设备框架pwm3接管             |
+| 6 (D6)          | PB10          | 是     | PWM2-CH3，默认被RT-Thread的PWM设备框架pwm2接管             |
+| 7 (D7)          | PA8           | 是     |                                                          |
+| 8 (D8)          | PA9           | 是     |                                                          |
+| 9 (D9)          | PC7           | 是     | PWM3-CH2，默认被RT-Thread的PWM设备框架pwm3接管             |
+| 10 (D10)        | PB6           | 是     | PWM4-CH1，默认被RT-Thread的PWM设备框架pwm4接管             |
+| 11 (D11)        | PA7           | 是     | PWM1-CH1N，默认被RT-Thread的PWM设备框架pwm1接管            |
+| 12 (D12)        | PA6           | 是     |                                                          |
+| 13 (D13)        | PA5           | 是     |                                                          |
+| 14 (D14)        | PB9           | 是     | I2C-SDA，默认被RT-Thread的I2C设备框架i2c1总线接管          |
+| 15 (D15)        | PB8           | 是     | I2C-SCL，默认被RT-Thread的I2C设备框架i2c1总线接管          |
+| 16 (D16)        | PC13          | 是     | Nucleo板载用户按键（左侧蓝色）                             |
+| A0              | PA0           | 是     | ADC1-CH0，默认被RT-Thread的ADC设备框架adc1接管             |
+| A1              | PA1           | 是     | ADC1-CH1，默认被RT-Thread的ADC设备框架adc1接管             |
+| A2              | PA4           | 是     | ADC1-CH4，默认被RT-Thread的ADC设备框架adc1接管             |
+| A3              | PB0           | 是     | ADC1-CH8，默认被RT-Thread的ADC设备框架adc1接管             |
+| A4              | PC1           | 是     | ADC1-CH11，默认被RT-Thread的ADC设备框架adc1接管            |
+| A5              | PC0           | 是     | ADC1-CH10，默认被RT-Thread的ADC设备框架adc1接管            |
+| A6              | --            |        | 芯片内部参考电压 ADC，默认被RT-Thread的ADC设备框架adc1接管  |
+| A7              | --            |        | 芯片内部温度 ADC，默认被RT-Thread的ADC设备框架adc1接管      |
 
 > 注意：
 >

bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/pins_arduino.c

@@ -5,45 +5,45 @@
  *
  * Change Logs:
  * Date           Author       Notes
- * 2022-04-19     Meco Man     first version
- * 2022-07-26     liYony       Perfect PWM (docking of complementary outputs)
+ * 2022-09-18     liYony       first version
  */
+
 #include <Arduino.h>
 #include <board.h>
 #include "pins_arduino.h"
 
 /*
-    {Arduino Pin, RT-Thread Pin [, Device Name(PWM or ADC), Channel]}
-    [] means optional
-    Digital pins must NOT give the device name and channel.
-    Analog pins MUST give the device name and channel(ADC, PWM or DAC).
-    Arduino Pin must keep in sequence.
-*/
+ * {Arduino Pin, RT-Thread Pin [, Device Name, Channel]}
+ * [] means optional
+ * Digital pins must NOT give the device name and channel.
+ * Analog pins MUST give the device name and channel(ADC, PWM or DAC).
+ * Arduino Pin must keep in sequence.
+ */
 const pin_map_t pin_map_table[]=
 {
-    {D0}, /* RX */
-    {D1}, /* TX */
+    {D0, GET_PIN(A,3), "uart2"},        /* Serial */
+    {D1, GET_PIN(A,2), "uart2"},        /* Serial */
     {D2, GET_PIN(A,10)},
-    {D3, GET_PIN(B,3), "pwm2", 2}, /* PWM2-CH2 */
+    {D3, GET_PIN(B,3), "pwm2", 2},      /* PWM */
     {D4, GET_PIN(B,5)},
-    {D5, GET_PIN(B,4), "pwm3", 1}, /* PWM3-CH1 */
-    {D6, GET_PIN(B,10), "pwm2", 3}, /* PWM2-CH3 */
+    {D5, GET_PIN(B,4), "pwm3", 1},      /* PWM */
+    {D6, GET_PIN(B,10), "pwm2", 3},     /* PWM */
     {D7, GET_PIN(A,8)},
     {D8, GET_PIN(A,9)},
-    {D9, GET_PIN(C,7), "pwm3", 2}, /* PWM3-CH2 */
-    {D10, GET_PIN(B,6), "pwm4", 1}, /* PWM4-CH1 */
-    {D11, GET_PIN(A,7), "pwm1", -1}, /* PWM1-CH1N */
+    {D9, GET_PIN(C,7), "pwm3", 2},      /* PWM */
+    {D10, GET_PIN(B,6), "pwm4", 1},     /* PWM */
+    {D11, GET_PIN(A,7), "pwm1", -1},    /* PWM */
     {D12, GET_PIN(A,6)},
-    {D13, GET_PIN(A,5)},
-    {D14}, /* I2C1-SDA */
-    {D15}, /* I2C1-SCL */
-    {D16, GET_PIN(C,13)}, /* user button */
-    {A0, GET_PIN(A,0), "adc1", 0}, /* ADC */
-    {A1, GET_PIN(A,1), "adc1", 1}, /* ADC */
-    {A2, GET_PIN(A,4), "adc1", 4}, /* ADC */
-    {A3, GET_PIN(B,0), "adc1", 8}, /* ADC */
-    {A4, GET_PIN(C,1), "adc1", 11}, /* ADC */
-    {A5, GET_PIN(C,0), "adc1", 10}, /* ADC */
-    {A6, RT_NULL, "adc1", 17}, /* ADC, On-Chip: internal reference voltage, ADC_CHANNEL_VREFINT */
-    {A7, RT_NULL, "adc1", 16} /* ADC, On-Chip: internal temperature sensor, ADC_CHANNEL_TEMPSENSOR */
+    {D13, GET_PIN(A,5)},                /* LED_BUILTIN */
+    {D14, GET_PIN(B,9), "i2c1"},        /* I2C (Wire) */
+    {D15, GET_PIN(B,8), "i2c1"},        /* I2C (Wire) */
+    {D16, GET_PIN(C,13)},
+    {A0, GET_PIN(A,0), "adc1", 0},      /* ADC */
+    {A1, GET_PIN(A,1), "adc1", 1},      /* ADC */
+    {A2, GET_PIN(A,4), "adc1", 4},      /* ADC */
+    {A3, GET_PIN(B,0), "adc1", 8},      /* ADC */
+    {A4, GET_PIN(C,1), "adc1", 11},     /* ADC */
+    {A5, GET_PIN(C,0), "adc1", 10},     /* ADC */
+    {A6, RT_NULL, "adc1", 17},          /* ADC, On-Chip: internal reference voltage, ADC_CHANNEL_VREFINT */
+    {A7, RT_NULL, "adc1", 16},          /* ADC, On-Chip: internal temperature sensor, ADC_CHANNEL_TEMPSENSOR */
 };

bsp/stm32/stm32f401-st-nucleo/applications/arduino_pinout/pins_arduino.h

@@ -1,46 +1,48 @@
 /*
- * Copyright (c) 2006-2021, RT-Thread Development Team
+ * Copyright (c) 2006-2022, RT-Thread Development Team
  *
  * SPDX-License-Identifier: Apache-2.0
  *
  * Change Logs:
  * Date           Author       Notes
- * 2022-04-19     Meco Man     first version
+ * 2022-09-18     liYony       first version
  */
 
 #ifndef Pins_Arduino_h
 #define Pins_Arduino_h
 
 /* pins alias. Must keep in sequence */
-#define D0   (0)
-#define D1   (1)
-#define D2   (2)
-#define D3   (3)
-#define D4   (4)
-#define D5   (5)
-#define D6   (6)
-#define D7   (7)
-#define D8   (8)
-#define D9   (9)
-#define D10  (10)
-#define D11  (11)
-#define D12  (12)
-#define D13  (13)
-#define D14  (14)
-#define D15  (15)
-#define D16  (16)
-#define A0   (17)
-#define A1   (18)
-#define A2   (19)
-#define A3   (20)
-#define A4   (21)
-#define A5   (22)
-#define A6   (23)
-#define A7   (24)
+#define D0        (0)
+#define D1        (1)
+#define D2        (2)
+#define D3        (3)
+#define D4        (4)
+#define D5        (5)
+#define D6        (6)
+#define D7        (7)
+#define D8        (8)
+#define D9        (9)
+#define D10       (10)
+#define D11       (11)
+#define D12       (12)
+#define D13       (13)
+#define D14       (14)
+#define D15       (15)
+#define D16       (16)
+#define A0        (17)
+#define A1        (18)
+#define A2        (19)
+#define A3        (20)
+#define A4        (21)
+#define A5        (22)
+#define A6        (23)
+#define A7        (24)
 
-#define F_CPU  84000000L /* CPU: 84MHz */
-#define LED_BUILTIN  D13 /* Default Built-in LED */
+#define F_CPU          84000000L  /* CPU:84MHz */
 
-#define RTDUINO_DEFAULT_IIC_BUS_NAME            "i2c1"
+#define LED_BUITIN     D13  /* Default Built-in LED */
+
+/* i2c1 - PB9-SDA PB8-SCL */
+#define RTDUINO_DEFAULT_IIC_BUS_NAME    "i2c1"
 
 #endif /* Pins_Arduino_h */