[bsp][raspi2] add raspberry pi 2 support

bsp/raspi2/.config

@@ -0,0 +1,274 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# RT-Thread Project Configuration
+#
+
+#
+# RT-Thread Kernel
+#
+CONFIG_RT_NAME_MAX=8
+CONFIG_RT_ALIGN_SIZE=4
+# CONFIG_RT_THREAD_PRIORITY_8 is not set
+CONFIG_RT_THREAD_PRIORITY_32=y
+# CONFIG_RT_THREAD_PRIORITY_256 is not set
+CONFIG_RT_THREAD_PRIORITY_MAX=32
+CONFIG_RT_TICK_PER_SECOND=100
+CONFIG_RT_DEBUG=y
+CONFIG_RT_USING_OVERFLOW_CHECK=y
+CONFIG_RT_DEBUG_INIT=0
+CONFIG_RT_DEBUG_THREAD=0
+CONFIG_RT_USING_HOOK=y
+CONFIG_IDLE_THREAD_STACK_SIZE=256
+# CONFIG_RT_USING_TIMER_SOFT is not set
+
+#
+# Inter-Thread communication
+#
+CONFIG_RT_USING_SEMAPHORE=y
+CONFIG_RT_USING_MUTEX=y
+CONFIG_RT_USING_EVENT=y
+CONFIG_RT_USING_MAILBOX=y
+CONFIG_RT_USING_MESSAGEQUEUE=y
+# CONFIG_RT_USING_SIGNALS is not set
+
+#
+# Memory Management
+#
+CONFIG_RT_USING_MEMPOOL=y
+# CONFIG_RT_USING_MEMHEAP is not set
+# CONFIG_RT_USING_NOHEAP is not set
+CONFIG_RT_USING_SMALL_MEM=y
+# CONFIG_RT_USING_SLAB is not set
+# CONFIG_RT_USING_MEMTRACE is not set
+CONFIG_RT_USING_HEAP=y
+
+#
+# Kernel Device Object
+#
+CONFIG_RT_USING_DEVICE=y
+# CONFIG_RT_USING_INTERRUPT_INFO is not set
+CONFIG_RT_USING_CONSOLE=y
+CONFIG_RT_CONSOLEBUF_SIZE=128
+CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
+# CONFIG_RT_USING_MODULE is not set
+CONFIG_ARCH_ARM=y
+CONFIG_ARCH_ARM_CORTEX_A=y
+CONFIG_ARCH_ARM_CORTEX_A7=y
+
+#
+# RT-Thread Components
+#
+CONFIG_RT_USING_COMPONENTS_INIT=y
+CONFIG_RT_USING_USER_MAIN=y
+CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
+
+#
+# C++ features
+#
+# CONFIG_RT_USING_CPLUSPLUS is not set
+
+#
+# Command shell
+#
+CONFIG_RT_USING_FINSH=y
+CONFIG_FINSH_THREAD_NAME="tshell"
+CONFIG_FINSH_USING_HISTORY=y
+CONFIG_FINSH_HISTORY_LINES=5
+CONFIG_FINSH_USING_SYMTAB=y
+CONFIG_FINSH_USING_DESCRIPTION=y
+# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
+CONFIG_FINSH_THREAD_PRIORITY=20
+CONFIG_FINSH_THREAD_STACK_SIZE=4096
+CONFIG_FINSH_CMD_SIZE=80
+# CONFIG_FINSH_USING_AUTH is not set
+CONFIG_FINSH_USING_MSH=y
+CONFIG_FINSH_USING_MSH_DEFAULT=y
+CONFIG_FINSH_USING_MSH_ONLY=y
+
+#
+# Device virtual file system
+#
+# CONFIG_RT_USING_DFS is not set
+
+#
+# Device Drivers
+#
+CONFIG_RT_USING_DEVICE_IPC=y
+CONFIG_RT_USING_SERIAL=y
+# CONFIG_RT_USING_CAN is not set
+# CONFIG_RT_USING_HWTIMER is not set
+# CONFIG_RT_USING_CPUTIME is not set
+# CONFIG_RT_USING_I2C is not set
+CONFIG_RT_USING_PIN=y
+# CONFIG_RT_USING_MTD_NOR is not set
+# CONFIG_RT_USING_MTD_NAND is not set
+# CONFIG_RT_USING_RTC is not set
+# CONFIG_RT_USING_SDIO is not set
+# CONFIG_RT_USING_SPI is not set
+# CONFIG_RT_USING_WDT is not set
+# CONFIG_RT_USING_WIFI is not set
+
+#
+# Using USB
+#
+# CONFIG_RT_USING_USB_HOST is not set
+# CONFIG_RT_USING_USB_DEVICE is not set
+
+#
+# POSIX layer and C standard library
+#
+CONFIG_RT_USING_LIBC=y
+# CONFIG_RT_USING_PTHREADS is not set
+# CONFIG_HAVE_SYS_SIGNALS is not set
+
+#
+# Network stack
+#
+
+#
+# light weight TCP/IP stack
+#
+# CONFIG_RT_USING_LWIP is not set
+
+#
+# Modbus master and slave stack
+#
+# CONFIG_RT_USING_MODBUS is not set
+
+#
+# VBUS(Virtual Software BUS)
+#
+# CONFIG_RT_USING_VBUS is not set
+
+#
+# Utilities
+#
+# CONFIG_RT_USING_LOGTRACE is not set
+# CONFIG_RT_USING_RYM is not set
+
+#
+# RT-Thread online packages
+#
+
+#
+# IoT - internet of things
+#
+# CONFIG_PKG_USING_PAHOMQTT is not set
+# CONFIG_PKG_USING_WEBCLIENT is not set
+# CONFIG_PKG_USING_MONGOOSE is not set
+# CONFIG_PKG_USING_WEBTERMINAL is not set
+# CONFIG_PKG_USING_CJSON is not set
+# CONFIG_PKG_USING_LJSON is not set
+# CONFIG_PKG_USING_EZXML is not set
+# CONFIG_PKG_USING_NANOPB is not set
+# CONFIG_PKG_USING_GAGENT_CLOUD is not set
+
+#
+# Wi-Fi
+#
+
+#
+# Marvell WiFi
+#
+# CONFIG_PKG_USING_WLANMARVELL is not set
+
+#
+# Wiced WiFi
+#
+# CONFIG_PKG_USING_WLAN_WICED is not set
+# CONFIG_PKG_USING_COAP is not set
+# CONFIG_PKG_USING_NOPOLL is not set
+# CONFIG_PKG_USING_NETUTILS is not set
+# CONFIG_PKG_USING_ONENET is not set
+
+#
+# security packages
+#
+# CONFIG_PKG_USING_MBEDTLS is not set
+# CONFIG_PKG_USING_libsodium is not set
+# CONFIG_PKG_USING_TINYCRYPT is not set
+
+#
+# language packages
+#
+# CONFIG_PKG_USING_JERRYSCRIPT is not set
+# CONFIG_PKG_USING_MICROPYTHON is not set
+
+#
+# multimedia packages
+#
+# CONFIG_PKG_USING_OPENMV is not set
+
+#
+# tools packages
+#
+# CONFIG_PKG_USING_CMBACKTRACE is not set
+# CONFIG_PKG_USING_EASYFLASH is not set
+# CONFIG_PKG_USING_EASYLOGGER is not set
+# CONFIG_PKG_USING_SYSTEMVIEW is not set
+# CONFIG_PKG_USING_IPERF is not set
+
+#
+# system packages
+#
+
+#
+# RT-Thread GUI Engine
+#
+# CONFIG_PKG_USING_GUIENGINE is not set
+# CONFIG_PKG_USING_PERSIMMON is not set
+# CONFIG_PKG_USING_LWEXT4 is not set
+# CONFIG_PKG_USING_PARTITION is not set
+# CONFIG_PKG_USING_SQLITE is not set
+# CONFIG_PKG_USING_RTI is not set
+# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
+
+#
+# peripheral libraries and drivers
+#
+# CONFIG_PKG_USING_STM32F4_HAL is not set
+# CONFIG_PKG_USING_STM32F4_DRIVERS is not set
+
+#
+# miscellaneous packages
+#
+# CONFIG_PKG_USING_FASTLZ is not set
+# CONFIG_PKG_USING_MINILZO is not set
+# CONFIG_PKG_USING_QUICKLZ is not set
+# CONFIG_PKG_USING_MULTIBUTTON is not set
+# CONFIG_PKG_USING_CANFESTIVAL is not set
+
+#
+# sample package
+#
+# CONFIG_PKG_USING_SAMPLES is not set
+
+#
+# example package: hello
+#
+# CONFIG_PKG_USING_HELLO is not set
+
+#
+# Privated Packages of RealThread
+#
+# CONFIG_PKG_USING_CODEC is not set
+# CONFIG_PKG_USING_PLAYER is not set
+# CONFIG_PKG_USING_PERSIMMON_SRC is not set
+
+#
+# Network Utilities
+#
+# CONFIG_PKG_USING_WLAN_WICED_SRC is not set
+# CONFIG_PKG_USING_CLOUDSDK is not set
+# CONFIG_PKG_USING_COREMARK is not set
+# CONFIG_PKG_USING_POWER_MANAGER is not set
+# CONFIG_PKG_USING_RT_OTA is not set
+# CONFIG_PKG_USING_RT_AT is not set
+
+#
+# Test Packages of RealThread
+#
+# CONFIG_PKG_USING_JERRYSCRIPT_WIN32 is not set
+# CONFIG_PKG_USING_JS_PERSIMMON is not set
+CONFIG_BCM2836_SOC=y
+CONFIG_RT_USING_UART1=y

bsp/raspi2/Kconfig

@@ -0,0 +1,26 @@
+mainmenu "RT-Thread Project Configuration"
+
+config $BSP_DIR
+    string
+    option env="BSP_ROOT"
+    default "."
+
+config $RTT_DIR
+    string
+    option env="RTT_ROOT"
+    default "../.."
+
+config $PKGS_DIR
+    string
+    option env="PKGS_ROOT"
+    default "packages"
+
+source "$RTT_DIR/KConfig"
+source "$PKGS_DIR/KConfig"
+
+config BCM2836_SOC
+    bool
+    select ARCH_ARM_CORTEX_A7
+    default y
+
+source "driver/Kconfig"

bsp/raspi2/README.md

@@ -0,0 +1,2 @@
+# raspi2
+RT-Thread for Raspberry Pi 2B

bsp/raspi2/SConscript

@@ -0,0 +1,14 @@
+# for module compiling
+import os
+from building import *
+
+cwd = GetCurrentDir()
+objs = []
+list = os.listdir(cwd)
+
+for d in list:
+    path = os.path.join(cwd, d)
+    if os.path.isfile(os.path.join(path, 'SConscript')):
+        objs = objs + SConscript(os.path.join(d, 'SConscript'))
+
+Return('objs')

bsp/raspi2/SConstruct

@@ -0,0 +1,27 @@
+import os
+import sys
+import rtconfig
+
+from rtconfig import RTT_ROOT
+
+sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
+from building import *
+
+TARGET = 'rtthread.' + rtconfig.TARGET_EXT
+
+env = Environment(tools = ['mingw'],
+    AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
+    CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS,
+    CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS,
+    AR = rtconfig.AR, ARFLAGS = '-rc',
+    LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
+env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
+
+Export('RTT_ROOT')
+Export('rtconfig')
+
+# prepare building environment
+objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=True)
+
+# make a building
+DoBuilding(TARGET, objs)

bsp/raspi2/applications/SConscript

@@ -0,0 +1,9 @@
+from building import *
+
+cwd     = GetCurrentDir()
+src     = Glob('*.c') + Glob('*.cpp')
+CPPPATH = [cwd, str(Dir('#'))]
+
+group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')

bsp/raspi2/applications/main.c

@@ -0,0 +1,36 @@
+/*
+ * File      : main.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2017, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2017-5-30      Bernard      the first version
+ */
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+#include <rtthread.h>
+
+int main(int argc, char** argv)
+{
+    rt_kprintf("Hello RT-Thread!\n");
+
+    return 0;
+}
+

bsp/raspi2/applications/mnt.c

@@ -0,0 +1,29 @@
+/*
+ * File      : mnt.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2017, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ */
+
+#include <rtthread.h>
+
+int mnt_init(void)
+{
+    return 0;
+}

bsp/raspi2/cpu/SConscript

@@ -0,0 +1,9 @@
+from building import *
+
+cwd     = GetCurrentDir()
+src     = Glob('*.c') + Glob('*.cpp') + Glob('*_gcc.S')
+CPPPATH = [cwd]
+
+group = DefineGroup('cpu', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')

bsp/raspi2/cpu/armv7.h

@@ -0,0 +1,64 @@
+#ifndef __ARMV7_H__
+#define __ARMV7_H__
+
+/* the exception stack without VFP registers */
+struct rt_hw_exp_stack
+{
+    unsigned long r0;
+    unsigned long r1;
+    unsigned long r2;
+    unsigned long r3;
+    unsigned long r4;
+    unsigned long r5;
+    unsigned long r6;
+    unsigned long r7;
+    unsigned long r8;
+    unsigned long r9;
+    unsigned long r10;
+    unsigned long fp;
+    unsigned long ip;
+    unsigned long sp;
+    unsigned long lr;
+    unsigned long pc;
+    unsigned long cpsr;
+};
+
+struct rt_hw_stack
+{
+    unsigned long cpsr;
+    unsigned long r0;
+    unsigned long r1;
+    unsigned long r2;
+    unsigned long r3;
+    unsigned long r4;
+    unsigned long r5;
+    unsigned long r6;
+    unsigned long r7;
+    unsigned long r8;
+    unsigned long r9;
+    unsigned long r10;
+    unsigned long fp;
+    unsigned long ip;
+    unsigned long lr;
+    unsigned long pc;
+};
+
+#define USERMODE    0x10
+#define FIQMODE     0x11
+#define IRQMODE     0x12
+#define SVCMODE     0x13
+#define MONITORMODE 0x16
+#define ABORTMODE   0x17
+#define HYPMODE     0x1b
+#define UNDEFMODE   0x1b
+#define MODEMASK    0x1f
+#define NOINT       0xc0
+
+#define T_Bit       (1<<5)
+#define F_Bit       (1<<6)
+#define I_Bit       (1<<7)
+#define A_Bit       (1<<8)
+#define E_Bit       (1<<9)
+#define J_Bit       (1<<24)
+
+#endif

bsp/raspi2/cpu/context_gcc.S

@@ -0,0 +1,105 @@
+/*
+ * File      : context.S
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2013, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2013-07-05     Bernard      the first version
+ */
+
+.section .text, "ax"
+/*
+ * rt_base_t rt_hw_interrupt_disable();
+ */
+.globl rt_hw_interrupt_disable
+rt_hw_interrupt_disable:
+    mrs r0, cpsr
+    cpsid i
+    bx  lr
+
+/*
+ * void rt_hw_interrupt_enable(rt_base_t level);
+ */
+.globl rt_hw_interrupt_enable
+rt_hw_interrupt_enable:
+    msr cpsr_c, r0
+    bx  lr
+
+/*
+ * void rt_hw_context_switch_to(rt_uint32 to);
+ * r0 --> to
+ */
+.globl rt_hw_context_switch_to
+rt_hw_context_switch_to:
+    ldr sp, [r0]            @ get new task stack pointer
+
+    ldmfd sp!, {r4}         @ pop new task spsr
+    msr spsr_cxsf, r4
+
+    ldmfd sp!, {r0-r12, lr, pc}^   @ pop new task r0-r12, lr & pc
+
+.section .bss.share.isr
+_guest_switch_lvl:
+    .word 0
+
+.globl vmm_virq_update
+
+.section .text.isr, "ax"
+/*
+ * void rt_hw_context_switch(rt_uint32 from, rt_uint32 to);
+ * r0 --> from
+ * r1 --> to
+ */
+.globl rt_hw_context_switch
+rt_hw_context_switch:
+    stmfd   sp!, {lr}       @ push pc (lr should be pushed in place of PC)
+    stmfd   sp!, {r0-r12, lr}   @ push lr & register file
+
+    mrs r4, cpsr
+    tst lr, #0x01
+    orrne r4, r4, #0x20     @ it's thumb code
+
+    stmfd sp!, {r4}         @ push cpsr
+
+    str sp, [r0]            @ store sp in preempted tasks TCB
+    ldr sp, [r1]            @ get new task stack pointer
+
+    ldmfd sp!, {r4}         @ pop new task cpsr to spsr
+    msr spsr_cxsf, r4
+    ldmfd sp!, {r0-r12, lr, pc}^  @ pop new task r0-r12, lr & pc, copy spsr to cpsr
+
+/*
+ * void rt_hw_context_switch_interrupt(rt_uint32 from, rt_uint32 to);
+ */
+.globl rt_thread_switch_interrupt_flag
+.globl rt_interrupt_from_thread
+.globl rt_interrupt_to_thread
+.globl rt_hw_context_switch_interrupt
+rt_hw_context_switch_interrupt:
+    ldr r2, =rt_thread_switch_interrupt_flag
+    ldr r3, [r2]
+    cmp r3, #1
+    beq _reswitch
+    ldr ip, =rt_interrupt_from_thread   @ set rt_interrupt_from_thread
+    mov r3, #1              @ set rt_thread_switch_interrupt_flag to 1
+    str r0, [ip]
+    str r3, [r2]
+_reswitch:
+    ldr r2, =rt_interrupt_to_thread     @ set rt_interrupt_to_thread
+    str r1, [r2]
+    bx  lr

bsp/raspi2/cpu/cp15.h

@@ -0,0 +1,12 @@
+#ifndef __CP15_H__
+#define __CP15_H__
+
+unsigned long rt_cpu_get_smp_id(void);
+
+void rt_cpu_mmu_disable(void);
+void rt_cpu_mmu_enable(void);
+void rt_cpu_tlb_set(volatile unsigned long*);
+
+void rt_cpu_vector_set_base(unsigned int addr);
+
+#endif

bsp/raspi2/cpu/cp15_gcc.S

@@ -0,0 +1,140 @@
+/*
+ * File      : cp15_gcc.S
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2013, RT-Thread Development Team
+ * http://www.rt-thread.org
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2013-07-05     Bernard      the first version
+ */
+
+.globl rt_cpu_get_smp_id
+rt_cpu_get_smp_id:
+    mrc     p15, #0, r0, c0, c0, #5
+    bx      lr
+
+.globl rt_cpu_vector_set_base
+rt_cpu_vector_set_base:
+    mcr     p15, #0, r0, c12, c0, #0
+    dsb
+    bx      lr
+
+.globl rt_hw_cpu_dcache_enable
+rt_hw_cpu_dcache_enable:
+    mrc     p15, #0, r0, c1, c0, #0
+    orr     r0,  r0, #0x00000004
+    mcr     p15, #0, r0, c1, c0, #0
+    bx      lr
+
+.globl rt_hw_cpu_icache_enable
+rt_hw_cpu_icache_enable:
+    mrc     p15, #0, r0, c1, c0, #0
+    orr     r0,  r0, #0x00001000
+    mcr     p15, #0, r0, c1, c0, #0
+    bx      lr
+
+_FLD_MAX_WAY:
+   .word  0x3ff
+_FLD_MAX_IDX:
+   .word  0x7ff
+
+.globl rt_cpu_dcache_clean_flush
+rt_cpu_dcache_clean_flush:
+    push    {r4-r11}
+    dmb
+    mrc     p15, #1, r0, c0, c0, #1  @ read clid register
+    ands    r3, r0, #0x7000000       @ get level of coherency
+    mov     r3, r3, lsr #23
+    beq     finished
+    mov     r10, #0
+loop1:
+    add     r2, r10, r10, lsr #1
+    mov     r1, r0, lsr r2
+    and     r1, r1, #7
+    cmp     r1, #2
+    blt     skip
+    mcr     p15, #2, r10, c0, c0, #0
+    isb
+    mrc     p15, #1, r1, c0, c0, #0
+    and     r2, r1, #7
+    add     r2, r2, #4
+    ldr     r4, _FLD_MAX_WAY
+    ands    r4, r4, r1, lsr #3
+    clz     r5, r4
+    ldr     r7, _FLD_MAX_IDX
+    ands    r7, r7, r1, lsr #13
+loop2:
+    mov     r9, r4
+loop3:
+    orr     r11, r10, r9, lsl r5
+    orr     r11, r11, r7, lsl r2
+    mcr     p15, #0, r11, c7, c14, #2
+    subs    r9, r9, #1
+    bge     loop3
+    subs    r7, r7, #1
+    bge     loop2
+skip:
+    add     r10, r10, #2
+    cmp     r3, r10
+    bgt     loop1
+
+finished:
+    dsb
+    isb
+    pop     {r4-r11}
+    bx      lr
+
+.globl rt_hw_cpu_dcache_disable
+rt_hw_cpu_dcache_disable:
+    push    {r4-r11, lr}
+    bl      rt_cpu_dcache_clean_flush
+    mrc     p15, #0, r0, c1, c0, #0
+    bic     r0,  r0, #0x00000004
+    mcr     p15, #0, r0, c1, c0, #0
+    pop     {r4-r11, lr}
+    bx      lr
+
+.globl rt_hw_cpu_icache_disable
+rt_hw_cpu_icache_disable:
+    mrc     p15, #0, r0, c1, c0, #0
+    bic     r0,  r0, #0x00001000
+    mcr     p15, #0, r0, c1, c0, #0
+    bx      lr
+
+.globl rt_cpu_mmu_disable
+rt_cpu_mmu_disable:
+    mcr     p15, #0, r0, c8, c7, #0    @ invalidate tlb
+    mrc     p15, #0, r0, c1, c0, #0
+    bic     r0, r0, #1
+    mcr     p15, #0, r0, c1, c0, #0    @ clear mmu bit
+    dsb
+    bx      lr
+
+.globl rt_cpu_mmu_enable
+rt_cpu_mmu_enable:
+    mrc     p15, #0, r0, c1, c0, #0
+    orr     r0, r0, #0x001
+    mcr     p15, #0, r0, c1, c0, #0    @ set mmu enable bit
+    dsb
+    bx      lr
+
+.globl rt_cpu_tlb_set
+rt_cpu_tlb_set:
+    mcr     p15, #0, r0, c2, c0, #0
+    dmb
+    bx      lr

bsp/raspi2/cpu/cpu.c

@@ -0,0 +1,37 @@
+/*
+ * File      : cpu.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006, RT-Thread Develop Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rt-thread.org/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2011-09-15     Bernard      first version
+ */
+
+#include <rthw.h>
+#include <rtthread.h>
+#include <board.h>
+
+/**
+ * @addtogroup AM33xx
+ */
+/*@{*/
+
+/** shutdown CPU */
+void rt_hw_cpu_shutdown()
+{
+    rt_uint32_t level;
+    rt_kprintf("shutdown...\n");
+
+    level = rt_hw_interrupt_disable();
+    while (level)
+    {
+        RT_ASSERT(0);
+    }
+}
+
+/*@}*/

bsp/raspi2/cpu/interrupt.c

@@ -0,0 +1,136 @@
+/*
+ * File      : interrupt.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2013-2014, RT-Thread Development Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rt-thread.org/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018/5/3       Bernard      first version
+ */
+
+#include <rthw.h>
+#include <rtthread.h>
+
+#include "cp15.h"
+#include <board.h>
+
+#define MAX_HANDLERS                64
+
+extern volatile rt_uint8_t rt_interrupt_nest;
+
+/* exception and interrupt handler table */
+struct rt_irq_desc isr_table[MAX_HANDLERS];
+
+rt_uint32_t rt_interrupt_from_thread;
+rt_uint32_t rt_interrupt_to_thread;
+rt_uint32_t rt_thread_switch_interrupt_flag;
+
+extern int system_vectors;
+
+static void default_isr_handler(int vector, void *param)
+{
+    rt_kprintf("unhandled irq: %d\n", vector);
+}
+
+/**
+ * This function will initialize hardware interrupt
+ */
+void rt_hw_interrupt_init(void)
+{
+    uint32_t index;
+
+    /* mask all of interrupts */
+    IRQ_DISABLE_BASIC = 0x000000ff;
+    IRQ_DISABLE1      = 0xffffffff;
+    IRQ_DISABLE2      = 0xffffffff;
+
+    for (index = 0; index < MAX_HANDLERS; index ++)
+    {
+        isr_table[index].handler = default_isr_handler;
+        isr_table[index].param = NULL;
+#ifdef RT_USING_INTERRUPT_INFO
+        rt_strncpy(isr_table[index].name, "unknown", RT_NAME_MAX);
+        isr_table[index].counter = 0;
+#endif
+    }
+
+    /* init interrupt nest, and context in thread sp */
+    rt_interrupt_nest = 0;
+    rt_interrupt_from_thread = 0;
+    rt_interrupt_to_thread = 0;
+    rt_thread_switch_interrupt_flag = 0;
+}
+
+/**
+ * This function will mask a interrupt.
+ * @param vector the interrupt number
+ */
+void rt_hw_interrupt_mask(int vector)
+{
+    if (vector < 8)
+    {
+        IRQ_DISABLE_BASIC = (1 << vector);
+    }
+    else if (vector < 32)
+    {
+        IRQ_DISABLE1 = (1 << vector);
+    }
+    else
+    {
+        vector = vector % 32;
+        IRQ_DISABLE2 = (1 << vector);
+    }
+}
+
+/**
+ * This function will un-mask a interrupt.
+ * @param vector the interrupt number
+ */
+void rt_hw_interrupt_umask(int vector)
+{
+    if (vector < 8)
+    {
+        IRQ_ENABLE_BASIC = (1 << vector);
+    }
+    else if (vector < 32)
+    {
+        IRQ_ENABLE1 = (1 << vector);
+    }
+    else
+    {
+        vector = vector % 32;
+        IRQ_ENABLE2 = (1 << vector);
+    }
+}
+
+/**
+ * This function will install a interrupt service routine to a interrupt.
+ * @param vector the interrupt number
+ * @param new_handler the interrupt service routine to be installed
+ * @param old_handler the old interrupt service routine
+ */
+rt_isr_handler_t rt_hw_interrupt_install(int vector, rt_isr_handler_t handler,
+        void *param, char *name)
+{
+    rt_isr_handler_t old_handler = RT_NULL;
+
+    if (vector < MAX_HANDLERS)
+    {
+        old_handler = isr_table[vector].handler;
+
+        if (handler != RT_NULL)
+        {
+#ifdef RT_USING_INTERRUPT_INFO
+            rt_strncpy(isr_table[vector].name, name, RT_NAME_MAX);
+#endif /* RT_USING_INTERRUPT_INFO */
+            isr_table[vector].handler = handler;
+            isr_table[vector].param = param;
+        }
+    }
+
+    return old_handler;
+}

bsp/raspi2/cpu/mmu.c

@@ -0,0 +1,207 @@
+/*
+ * File      : mmu.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006, RT-Thread Development Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rt-thread.org/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2012-01-10     bernard      porting to AM1808
+ */
+
+#include <rtthread.h>
+#include <rthw.h>
+#include <board.h>
+
+#include "cp15.h"
+
+#define DESC_SEC       (0x2)
+#define CB             (3<<2)  //cache_on, write_back
+#define CNB            (2<<2)  //cache_on, write_through
+#define NCB            (1<<2)  //cache_off,WR_BUF on
+#define NCNB           (0<<2)  //cache_off,WR_BUF off
+#define AP_RW          (3<<10) //supervisor=RW, user=RW
+#define AP_RO          (2<<10) //supervisor=RW, user=RO
+#define XN             (1<<4)  // eXecute Never
+
+#define DOMAIN_FAULT   (0x0)
+#define DOMAIN_CHK     (0x1)
+#define DOMAIN_NOTCHK  (0x3)
+#define DOMAIN0        (0x0<<5)
+#define DOMAIN1        (0x1<<5)
+
+#define DOMAIN0_ATTR   (DOMAIN_CHK<<0)
+#define DOMAIN1_ATTR   (DOMAIN_FAULT<<2)
+
+/* Read/Write, cache, write back */
+#define RW_CB          (AP_RW|DOMAIN0|CB|DESC_SEC)
+/* Read/Write, cache, write through */
+#define RW_CNB         (AP_RW|DOMAIN0|CNB|DESC_SEC)
+/* Read/Write without cache and write buffer */
+#define RW_NCNB        (AP_RW|DOMAIN0|NCNB|DESC_SEC)
+/* Read/Write without cache and write buffer, no execute */
+#define RW_NCNBXN      (AP_RW|DOMAIN0|NCNB|DESC_SEC|XN)
+/* Read/Write without cache and write buffer */
+#define RW_FAULT       (AP_RW|DOMAIN1|NCNB|DESC_SEC)
+
+/* dump 2nd level page table */
+void rt_hw_cpu_dump_page_table_2nd(rt_uint32_t *ptb)
+{
+    int i;
+    int fcnt = 0;
+
+    for (i = 0; i < 256; i++)
+    {
+        rt_uint32_t pte2 = ptb[i];
+        if ((pte2 & 0x3) == 0)
+        {
+            if (fcnt == 0)
+                rt_kprintf("    ");
+            rt_kprintf("%04x: ", i);
+            fcnt++;
+            if (fcnt == 16)
+            {
+                rt_kprintf("fault\n");
+                fcnt = 0;
+            }
+            continue;
+        }
+        if (fcnt != 0)
+        {
+            rt_kprintf("fault\n");
+            fcnt = 0;
+        }
+
+        rt_kprintf("    %04x: %x: ", i, pte2);
+        if ((pte2 & 0x3) == 0x1)
+        {
+            rt_kprintf("L,ap:%x,xn:%d,texcb:%02x\n",
+                       ((pte2 >> 7) | (pte2 >> 4))& 0xf,
+                       (pte2 >> 15) & 0x1,
+                       ((pte2 >> 10) | (pte2 >> 2)) & 0x1f);
+        }
+        else
+        {
+            rt_kprintf("S,ap:%x,xn:%d,texcb:%02x\n",
+                       ((pte2 >> 7) | (pte2 >> 4))& 0xf, pte2 & 0x1,
+                       ((pte2 >> 4) | (pte2 >> 2)) & 0x1f);
+        }
+    }
+}
+
+void rt_hw_cpu_dump_page_table(rt_uint32_t *ptb)
+{
+    int i;
+    int fcnt = 0;
+
+    rt_kprintf("page table@%p\n", ptb);
+    for (i = 0; i < 1024*4; i++)
+    {
+        rt_uint32_t pte1 = ptb[i];
+        if ((pte1 & 0x3) == 0)
+        {
+            rt_kprintf("%03x: ", i);
+            fcnt++;
+            if (fcnt == 16)
+            {
+                rt_kprintf("fault\n");
+                fcnt = 0;
+            }
+            continue;
+        }
+        if (fcnt != 0)
+        {
+            rt_kprintf("fault\n");
+            fcnt = 0;
+        }
+
+        rt_kprintf("%03x: %08x: ", i, pte1);
+        if ((pte1 & 0x3) == 0x3)
+        {
+            rt_kprintf("LPAE\n");
+        }
+        else if ((pte1 & 0x3) == 0x1)
+        {
+            rt_kprintf("pte,ns:%d,domain:%d\n",
+                       (pte1 >> 3) & 0x1, (pte1 >> 5) & 0xf);
+            /*
+             *rt_hw_cpu_dump_page_table_2nd((void*)((pte1 & 0xfffffc000)
+             *                               - 0x80000000 + 0xC0000000));
+             */
+        }
+        else if (pte1 & (1 << 18))
+        {
+            rt_kprintf("super section,ns:%d,ap:%x,xn:%d,texcb:%02x\n",
+                       (pte1 >> 19) & 0x1,
+                       ((pte1 >> 13) | (pte1 >> 10))& 0xf,
+                       (pte1 >> 4) & 0x1,
+                       ((pte1 >> 10) | (pte1 >> 2)) & 0x1f);
+        }
+        else
+        {
+            rt_kprintf("section,ns:%d,ap:%x,"
+                       "xn:%d,texcb:%02x,domain:%d\n",
+                       (pte1 >> 19) & 0x1,
+                       ((pte1 >> 13) | (pte1 >> 10))& 0xf,
+                       (pte1 >> 4) & 0x1,
+                       (((pte1 & (0x7 << 12)) >> 10) |
+                        ((pte1 &        0x0c) >>  2)) & 0x1f,
+                       (pte1 >> 5) & 0xf);
+        }
+    }
+}
+
+/* level1 page table, each entry for 1MB memory. */
+volatile static unsigned long MMUTable[4*1024] __attribute__((aligned(16*1024)));
+void rt_hw_mmu_setmtt(rt_uint32_t vaddrStart,
+                      rt_uint32_t vaddrEnd,
+                      rt_uint32_t paddrStart,
+                      rt_uint32_t attr)
+{
+    volatile rt_uint32_t *pTT;
+    volatile int i, nSec;
+    pTT  = (rt_uint32_t *)MMUTable + (vaddrStart >> 20);
+    nSec = (vaddrEnd >> 20) - (vaddrStart >> 20);
+    for(i = 0; i <= nSec; i++)
+    {
+        *pTT = attr | (((paddrStart >> 20) + i) << 20);
+        pTT++;
+    }
+}
+
+unsigned long rt_hw_set_domain_register(unsigned long domain_val)
+{
+    unsigned long old_domain;
+
+    asm volatile ("mrc p15, 0, %0, c3, c0\n" : "=r" (old_domain));
+    asm volatile ("mcr p15, 0, %0, c3, c0\n" : :"r" (domain_val) : "memory");
+
+    return old_domain;
+}
+
+void rt_hw_mmu_init(void)
+{
+    rt_hw_cpu_dcache_disable();
+    rt_hw_cpu_icache_disable();
+    rt_cpu_mmu_disable();
+
+    /* set page table */
+    /* 4G 1:1 memory */
+    rt_hw_mmu_setmtt(0, 0xffffffff-1, 0, RW_CB);
+    /* IO memory region */
+    rt_hw_mmu_setmtt(0x44000000, 0x80000000-1, 0x44000000, RW_NCNBXN);
+
+    /*rt_hw_cpu_dump_page_table(MMUTable);*/
+    rt_hw_set_domain_register(0x55555555);
+
+    rt_cpu_tlb_set(MMUTable);
+
+    rt_cpu_mmu_enable();
+
+    rt_hw_cpu_icache_enable();
+    rt_hw_cpu_dcache_enable();
+}
+

bsp/raspi2/cpu/stack.c

@@ -0,0 +1,68 @@
+/*
+ * File      : stack.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2011, RT-Thread Development Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rt-thread.org/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2011-09-23     Bernard      the first version
+ * 2011-10-05     Bernard      add thumb mode
+ */
+#include <rtthread.h>
+#include <board.h>
+#include <armv7.h>
+
+/**
+ * @addtogroup AM33xx
+ */
+/*@{*/
+
+/**
+ * This function will initialize thread stack
+ *
+ * @param tentry the entry of thread
+ * @param parameter the parameter of entry
+ * @param stack_addr the beginning stack address
+ * @param texit the function will be called when thread exit
+ *
+ * @return stack address
+ */
+rt_uint8_t *rt_hw_stack_init(void *tentry, void *parameter,
+                             rt_uint8_t *stack_addr, void *texit)
+{
+    rt_uint32_t *stk;
+
+    stack_addr += sizeof(rt_uint32_t);
+    stack_addr  = (rt_uint8_t *)RT_ALIGN_DOWN((rt_uint32_t)stack_addr, 8);
+    stk      = (rt_uint32_t *)stack_addr;
+    *(--stk) = (rt_uint32_t)tentry;         /* entry point */
+    *(--stk) = (rt_uint32_t)texit;          /* lr */
+    *(--stk) = 0xdeadbeef;                  /* r12 */
+    *(--stk) = 0xdeadbeef;                  /* r11 */
+    *(--stk) = 0xdeadbeef;                  /* r10 */
+    *(--stk) = 0xdeadbeef;                  /* r9 */
+    *(--stk) = 0xdeadbeef;                  /* r8 */
+    *(--stk) = 0xdeadbeef;                  /* r7 */
+    *(--stk) = 0xdeadbeef;                  /* r6 */
+    *(--stk) = 0xdeadbeef;                  /* r5 */
+    *(--stk) = 0xdeadbeef;                  /* r4 */
+    *(--stk) = 0xdeadbeef;                  /* r3 */
+    *(--stk) = 0xdeadbeef;                  /* r2 */
+    *(--stk) = 0xdeadbeef;                  /* r1 */
+    *(--stk) = (rt_uint32_t)parameter;      /* r0 : argument */
+
+    /* cpsr */
+    if ((rt_uint32_t)tentry & 0x01)
+        *(--stk) = SVCMODE | 0x20;          /* thumb mode */
+    else
+        *(--stk) = SVCMODE;                 /* arm mode   */
+
+    /* return task's current stack address */
+    return (rt_uint8_t *)stk;
+}
+
+/*@}*/

bsp/raspi2/cpu/start_gcc.S

@@ -0,0 +1,279 @@
+/*
+ * File      : start_gcc.S
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2013-2014, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2013-07-05     Bernard      the first version
+ */
+
+.equ Mode_USR,        0x10
+.equ Mode_FIQ,        0x11
+.equ Mode_IRQ,        0x12
+.equ Mode_SVC,        0x13
+.equ Mode_ABT,        0x17
+.equ Mode_UND,        0x1B
+.equ Mode_SYS,        0x1F
+
+.equ I_Bit,           0x80            @ when I bit is set, IRQ is disabled
+.equ F_Bit,           0x40            @ when F bit is set, FIQ is disabled
+
+.equ UND_Stack_Size,     0x00000000
+.equ SVC_Stack_Size,     0x00000100
+.equ ABT_Stack_Size,     0x00000000
+.equ RT_FIQ_STACK_PGSZ,  0x00000000
+.equ RT_IRQ_STACK_PGSZ,  0x00000100
+.equ USR_Stack_Size,     0x00000100
+
+#define ISR_Stack_Size  (UND_Stack_Size + SVC_Stack_Size + ABT_Stack_Size + \
+                 RT_FIQ_STACK_PGSZ + RT_IRQ_STACK_PGSZ)
+
+.section .data.share.isr
+/* stack */
+.globl stack_start
+.globl stack_top
+
+stack_start:
+.rept ISR_Stack_Size
+.byte 0
+.endr
+stack_top:
+
+.text
+/* reset entry */
+.globl _reset
+_reset:
+	/* Disable IRQ & FIQ */
+	cpsid if
+
+	/* Check for HYP mode */
+	mrs r0, cpsr_all
+	and r0, r0, #0x1F
+	mov r8, #0x1A
+	cmp r0, r8
+	beq overHyped
+	b continue
+
+overHyped: /* Get out of HYP mode */
+	ldr r1, =continue
+	msr ELR_hyp, r1
+	mrs r1, cpsr_all
+	and r1, r1, #0x1f	;@ CPSR_MODE_MASK
+	orr r1, r1, #0x13	;@ CPSR_MODE_SUPERVISOR
+	msr SPSR_hyp, r1
+	eret
+
+continue:
+
+    /* disable smp */
+    bl      arm_smp_disable
+
+    /* disable mmu */
+    bl      rt_cpu_mmu_disable
+    /* set the cpu to SVC32 mode and disable interrupt */
+    mrs     r0, cpsr
+    bic     r0, r0, #0x1f
+    orr     r0, r0, #0x13
+    msr     cpsr_c, r0
+
+    /* setup stack */
+    bl      stack_setup
+
+    /* clear .bss */
+    mov     r0,#0                   /* get a zero                       */
+    ldr     r1,=__bss_start         /* bss start                        */
+    ldr     r2,=__bss_end           /* bss end                          */
+
+bss_loop:
+    cmp     r1,r2                   /* check if data to clear           */
+    strlo   r0,[r1],#4              /* clear 4 bytes                    */
+    blo     bss_loop                /* loop until done                  */
+
+    /* start RT-Thread Kernel */
+    ldr     pc, _rtthread_startup
+_rtthread_startup:
+    .word rtthread_startup
+
+stack_setup:
+    ldr     r0, =stack_top
+
+    @  Set the startup stack for svc
+    mov     sp, r0
+	sub     r0, r0, #SVC_Stack_Size
+
+    @  Enter Undefined Instruction Mode and set its Stack Pointer
+    msr     cpsr_c, #Mode_UND|I_Bit|F_Bit
+    mov     sp, r0
+    sub     r0, r0, #UND_Stack_Size
+
+    @  Enter Abort Mode and set its Stack Pointer
+    msr     cpsr_c, #Mode_ABT|I_Bit|F_Bit
+    mov     sp, r0
+    sub     r0, r0, #ABT_Stack_Size
+
+    @  Enter FIQ Mode and set its Stack Pointer
+    msr     cpsr_c, #Mode_FIQ|I_Bit|F_Bit
+    mov     sp, r0
+    sub     r0, r0, #RT_FIQ_STACK_PGSZ
+
+    @  Enter IRQ Mode and set its Stack Pointer
+    msr     cpsr_c, #Mode_IRQ|I_Bit|F_Bit
+    mov     sp, r0
+    sub     r0, r0, #RT_IRQ_STACK_PGSZ
+
+    /* come back to SVC mode */
+    msr     cpsr_c, #Mode_SVC|I_Bit|F_Bit
+    bx      lr
+
+.text
+;@ void arm_smp_enable(void);
+.globl arm_smp_enable
+arm_smp_enable:
+    mrc p15, 0, r0, c1, c0, 1   ;@ set SMP bit in ACTLR
+    orr r0, r0, #0x40
+    mcr p15, 0, r0, c1, c0, 1
+    bx lr
+
+.text
+;@ void arm_smp_disable(void);
+.globl arm_smp_disable
+arm_smp_disable:
+    mrc p15, 0, r0, c1, c0, 1   ;@ clear SMP bit in ACTLR
+    bic r0, r0, #0x40
+    mcr p15, 0, r0, c1, c0, 1
+    bx lr
+
+/* exception handlers: undef, swi, padt, dabt, resv, irq, fiq          */
+.section .text.isr, "ax"
+    .align  5
+.globl vector_fiq
+vector_fiq:
+    stmfd   sp!,{r0-r7,lr}
+    bl      rt_hw_trap_fiq
+    ldmfd   sp!,{r0-r7,lr}
+    subs    pc, lr, #4
+
+.globl      rt_interrupt_enter
+.globl      rt_interrupt_leave
+.globl      rt_thread_switch_interrupt_flag
+.globl      rt_interrupt_from_thread
+.globl      rt_interrupt_to_thread
+
+.globl      rt_current_thread
+.globl      vmm_thread
+.globl      vmm_virq_check
+
+    .align  5
+.globl vector_irq
+vector_irq:
+    stmfd   sp!, {r0-r12,lr}
+
+    bl      rt_interrupt_enter
+    bl      rt_hw_trap_irq
+    bl      rt_interrupt_leave
+
+    @ if rt_thread_switch_interrupt_flag set, jump to
+    @ rt_hw_context_switch_interrupt_do and don't return
+    ldr     r0, =rt_thread_switch_interrupt_flag
+    ldr     r1, [r0]
+    cmp     r1, #1
+    beq     rt_hw_context_switch_interrupt_do
+
+    ldmfd   sp!, {r0-r12,lr}
+    subs    pc,  lr, #4
+
+rt_hw_context_switch_interrupt_do:
+    mov     r1,  #0         @ clear flag
+    str     r1,  [r0]
+
+    mov     r1, sp          @ r1 point to {r0-r3} in stack
+    add     sp, sp, #4*4
+    ldmfd   sp!, {r4-r12,lr}@ reload saved registers
+    mrs     r0,  spsr       @ get cpsr of interrupt thread
+    sub     r2,  lr, #4     @ save old task's pc to r2
+
+    @ Switch to SVC mode with no interrupt. If the usr mode guest is
+    @ interrupted, this will just switch to the stack of kernel space.
+    @ save the registers in kernel space won't trigger data abort.
+    msr     cpsr_c, #I_Bit|F_Bit|Mode_SVC
+
+    stmfd   sp!, {r2}       @ push old task's pc
+    stmfd   sp!, {r4-r12,lr}@ push old task's lr,r12-r4
+    ldmfd   r1,  {r1-r4}    @ restore r0-r3 of the interrupt thread
+    stmfd   sp!, {r1-r4}    @ push old task's r0-r3
+    stmfd   sp!, {r0}       @ push old task's cpsr
+
+    ldr     r4,  =rt_interrupt_from_thread
+    ldr     r5,  [r4]
+    str     sp,  [r5]       @ store sp in preempted tasks's TCB
+
+    ldr     r6,  =rt_interrupt_to_thread
+    ldr     r6,  [r6]
+    ldr     sp,  [r6]       @ get new task's stack pointer
+
+    ldmfd   sp!, {r4}       @ pop new task's cpsr to spsr
+    msr     spsr_cxsf, r4
+
+    ldmfd   sp!, {r0-r12,lr,pc}^ @ pop new task's r0-r12,lr & pc, copy spsr to cpsr
+
+.macro push_svc_reg
+    sub     sp, sp, #17 * 4         @/* Sizeof(struct rt_hw_exp_stack)  */
+    stmia   sp, {r0 - r12}          @/* Calling r0-r12                  */
+    mov     r0, sp
+    mrs     r6, spsr                @/* Save CPSR                       */
+    str     lr, [r0, #15*4]         @/* Push PC                         */
+    str     r6, [r0, #16*4]         @/* Push CPSR                       */
+    cps     #Mode_SVC
+    str     sp, [r0, #13*4]         @/* Save calling SP                 */
+    str     lr, [r0, #14*4]         @/* Save calling PC                 */
+.endm
+
+    .align  5
+    .globl  vector_swi
+vector_swi:
+    push_svc_reg
+    bl      rt_hw_trap_swi
+    b       .
+
+    .align  5
+    .globl  vector_undef
+vector_undef:
+    push_svc_reg
+    bl      rt_hw_trap_undef
+    b       .
+
+    .align  5
+    .globl  vector_pabt
+vector_pabt:
+    push_svc_reg
+    bl      rt_hw_trap_pabt
+    b       .
+
+    .align  5
+    .globl  vector_dabt
+vector_dabt:
+    push_svc_reg
+    bl      rt_hw_trap_dabt
+    b       .
+
+    .align  5
+    .globl  vector_resv
+vector_resv:
+    push_svc_reg
+    bl      rt_hw_trap_resv
+    b       .

bsp/raspi2/cpu/trap.c

@@ -0,0 +1,183 @@
+/*
+ * File      : trap.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2013, RT-Thread Develop Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rt-thread.org/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2013-07-20     Bernard      first version
+ */
+
+#include <rthw.h>
+#include <board.h>
+#include <rtthread.h>
+
+#include "armv7.h"
+
+extern struct rt_thread *rt_current_thread;
+#ifdef RT_USING_FINSH
+extern long list_thread(void);
+#endif
+
+/**
+ * this function will show registers of CPU
+ *
+ * @param regs the registers point
+ */
+void rt_hw_show_register(struct rt_hw_exp_stack *regs)
+{
+    rt_kprintf("Execption:\n");
+    rt_kprintf("r00:0x%08x r01:0x%08x r02:0x%08x r03:0x%08x\n", regs->r0, regs->r1, regs->r2, regs->r3);
+    rt_kprintf("r04:0x%08x r05:0x%08x r06:0x%08x r07:0x%08x\n", regs->r4, regs->r5, regs->r6, regs->r7);
+    rt_kprintf("r08:0x%08x r09:0x%08x r10:0x%08x\n", regs->r8, regs->r9, regs->r10);
+    rt_kprintf("fp :0x%08x ip :0x%08x\n", regs->fp, regs->ip);
+    rt_kprintf("sp :0x%08x lr :0x%08x pc :0x%08x\n", regs->sp, regs->lr, regs->pc);
+    rt_kprintf("cpsr:0x%08x\n", regs->cpsr);
+}
+
+/**
+ * When comes across an instruction which it cannot handle,
+ * it takes the undefined instruction trap.
+ *
+ * @param regs system registers
+ *
+ * @note never invoke this function in application
+ */
+void rt_hw_trap_undef(struct rt_hw_exp_stack *regs)
+{
+    rt_kprintf("undefined instruction:\n");
+    rt_hw_show_register(regs);
+#ifdef RT_USING_FINSH
+    list_thread();
+#endif
+    rt_hw_cpu_shutdown();
+}
+
+/**
+ * The software interrupt instruction (SWI) is used for entering
+ * Supervisor mode, usually to request a particular supervisor
+ * function.
+ *
+ * @param regs system registers
+ *
+ * @note never invoke this function in application
+ */
+void rt_hw_trap_swi(struct rt_hw_exp_stack *regs)
+{
+    rt_kprintf("software interrupt:\n");
+    rt_hw_show_register(regs);
+#ifdef RT_USING_FINSH
+    list_thread();
+#endif
+    rt_hw_cpu_shutdown();
+}
+
+/**
+ * An abort indicates that the current memory access cannot be completed,
+ * which occurs during an instruction prefetch.
+ *
+ * @param regs system registers
+ *
+ * @note never invoke this function in application
+ */
+void rt_hw_trap_pabt(struct rt_hw_exp_stack *regs)
+{
+    rt_kprintf("prefetch abort:\n");
+    rt_hw_show_register(regs);
+#ifdef RT_USING_FINSH
+    list_thread();
+#endif
+    rt_hw_cpu_shutdown();
+}
+
+/**
+ * An abort indicates that the current memory access cannot be completed,
+ * which occurs during a data access.
+ *
+ * @param regs system registers
+ *
+ * @note never invoke this function in application
+ */
+void rt_hw_trap_dabt(struct rt_hw_exp_stack *regs)
+{
+    rt_kprintf("data abort:");
+    rt_hw_show_register(regs);
+#ifdef RT_USING_FINSH
+    list_thread();
+#endif
+    rt_hw_cpu_shutdown();
+}
+
+/**
+ * Normally, system will never reach here
+ *
+ * @param regs system registers
+ *
+ * @note never invoke this function in application
+ */
+void rt_hw_trap_resv(struct rt_hw_exp_stack *regs)
+{
+    rt_kprintf("reserved trap:\n");
+    rt_hw_show_register(regs);
+#ifdef RT_USING_FINSH
+    list_thread();
+#endif
+    rt_hw_cpu_shutdown();
+}
+
+void rt_hw_trap_irq(void)
+{
+    void *param;
+    rt_isr_handler_t isr_func;
+    extern struct rt_irq_desc isr_table[];
+
+    uint32_t value = 0;
+
+    // rt_kprintf("pend basic: 0x%08x\n", IRQ_PEND_BASIC);
+    // rt_kprintf("     pend1: 0x%08x\n", IRQ_PEND1);
+    // rt_kprintf("     pend2: 0x%08x\n", IRQ_PEND2);
+
+    value = IRQ_PEND_BASIC & 0x3ff;
+    if (value)
+    {
+        uint32_t irq;
+
+        if (value & (1 << 8))
+        {
+            value = IRQ_PEND1;
+            irq = __rt_ffs(value) - 1;
+        }
+        else if (value & (1 << 9))
+        {
+            value = IRQ_PEND2;
+            irq = __rt_ffs(value) + 31;
+        }
+        else
+        {
+            value &= 0x0f;
+            irq = __rt_ffs(value) - 1;
+        }
+
+        /* get interrupt service routine */
+        isr_func = isr_table[irq].handler;
+#ifdef RT_USING_INTERRUPT_INFO
+        isr_table[irq].counter++;
+#endif
+        if (isr_func)
+        {
+            /* Interrupt for myself. */
+            param = isr_table[irq].param;
+            /* turn to interrupt service routine */
+            isr_func(irq, param);
+        }
+    }
+}
+
+void rt_hw_trap_fiq(void)
+{
+    /* TODO */
+}

bsp/raspi2/cpu/vector_gcc.S

@@ -0,0 +1,65 @@
+/*
+ * File      : vector_gcc.S
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2013, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2013-07-05     Bernard      the first version
+ */
+
+.section .vectors, "ax"
+.code 32
+
+.globl system_vectors
+system_vectors:
+    ldr pc, _vector_reset
+    ldr pc, _vector_undef
+    ldr pc, _vector_swi
+    ldr pc, _vector_pabt
+    ldr pc, _vector_dabt
+    ldr pc, _vector_resv
+    ldr pc, _vector_irq
+    ldr pc, _vector_fiq
+
+.globl _reset
+.globl vector_undef
+.globl vector_swi
+.globl vector_pabt
+.globl vector_dabt
+.globl vector_resv
+.globl vector_irq
+.globl vector_fiq
+
+_vector_reset:
+    .word _reset
+_vector_undef:
+    .word vector_undef
+_vector_swi:
+    .word vector_swi
+_vector_pabt:
+    .word vector_pabt
+_vector_dabt:
+    .word vector_dabt
+_vector_resv:
+    .word vector_resv
+_vector_irq:
+    .word vector_irq
+_vector_fiq:
+    .word vector_fiq
+
+.balignl    16,0xdeadbeef

bsp/raspi2/driver/Kconfig

@@ -0,0 +1,3 @@
+config RT_USING_UART1
+    bool "Enable UART1"
+    default y

bsp/raspi2/driver/SConscript

@@ -0,0 +1,17 @@
+# RT-Thread building script for component
+
+from building import *
+
+cwd     = GetCurrentDir()
+src     = Split('''
+board.c
+drv_uart.c
+''')
+CPPPATH = [cwd]
+
+if GetDepend('RT_USING_PIN'):
+    src += ['drv_gpio.c']
+
+group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')

bsp/raspi2/driver/bcm283x.h

@@ -0,0 +1,125 @@
+#ifndef BCM283X_H__
+#define BCM283X_H__
+
+#include <rthw.h>
+
+#define PER_BASE    		(0x3F000000)
+#define PER_BASE_40000000 	(0x40000000)
+
+/*
+ *  GPIO
+ */
+#define GPIO_BASE       (PER_BASE + 0x200000)
+#define GPIO_GPFSEL0    HWREG32(GPIO_BASE + 0x00)  /* GPIO Function Select 0 32bit R/W */
+#define GPIO_GPFSEL1    HWREG32(GPIO_BASE + 0x04)  /* GPIO Function Select 1 32bit R/W */
+#define GPIO_GPFSEL2    HWREG32(GPIO_BASE + 0x08)  /* GPIO Function Select 2 32bit R/W */
+#define GPIO_GPFSEL4    HWREG32(GPIO_BASE + 0x10)  /* GPIO Function Select 4 32bit R/W */
+#define GPIO_GPSET0     HWREG32(GPIO_BASE + 0x1C)
+#define GPIO_GPCLR0     HWREG32(GPIO_BASE + 0x28)
+#define GPIO_GPPUD      HWREG32(GPIO_BASE + 0x94)  /* GPIO Pin Pull-up/down Enable */
+#define GPIO_GPPUDCLK0  HWREG32(GPIO_BASE + 0x98)  /* GPIO Pin Pull-up/down Enable Clock 0 */
+#define GPIO_GPPUDCLK1  HWREG32(GPIO_BASE + 0x9C)  /* GPIO Pin Pull-up/down Enable Clock 1 */
+
+/*
+ *  Interrupt Controler
+ */
+#define IRQ_BASE            (PER_BASE + 0xB200)
+#define IRQ_PEND_BASIC      HWREG32(IRQ_BASE + 0x00)
+#define IRQ_PEND1           HWREG32(IRQ_BASE + 0x04)
+#define IRQ_PEND2           HWREG32(IRQ_BASE + 0x08)
+#define IRQ_FIQ_CONTROL     HWREG32(IRQ_BASE + 0x0C)
+#define IRQ_ENABLE1         HWREG32(IRQ_BASE + 0x10)
+#define IRQ_ENABLE2         HWREG32(IRQ_BASE + 0x14)
+#define IRQ_ENABLE_BASIC    HWREG32(IRQ_BASE + 0x18)
+#define IRQ_DISABLE1        HWREG32(IRQ_BASE + 0x1C)
+#define IRQ_DISABLE2        HWREG32(IRQ_BASE + 0x20)
+#define IRQ_DISABLE_BASIC   HWREG32(IRQ_BASE + 0x24)
+
+/*
+ *  System Timer
+ */
+#define STIMER_BASE         (PER_BASE  + 0x3000)
+#define STIMER_CS           HWREG32(STIMER_BASE + 0x00)
+#define STIMER_CLO          HWREG32(STIMER_BASE + 0x04)
+#define STIMER_CHI          HWREG32(STIMER_BASE + 0x08)
+#define STIMER_C0           HWREG32(STIMER_BASE + 0x0C)
+#define STIMER_C1           HWREG32(STIMER_BASE + 0x10)
+#define STIMER_C2           HWREG32(STIMER_BASE + 0x14)
+#define STIMER_C3           HWREG32(STIMER_BASE + 0x18)
+
+/*
+ * ARM Timer
+ */
+#define ARM_TIMER_BASE		(PER_BASE + 0xB000)
+
+#define ARM_TIMER_LOAD		HWREG32(ARM_TIMER_BASE + 0x400)
+#define ARM_TIMER_VALUE		HWREG32(ARM_TIMER_BASE + 0x404)
+#define ARM_TIMER_CTRL		HWREG32(ARM_TIMER_BASE + 0x408)
+#define ARM_TIMER_IRQCLR	HWREG32(ARM_TIMER_BASE + 0x40C)
+#define ARM_TIMER_RAWIRQ	HWREG32(ARM_TIMER_BASE + 0x410)
+#define ARM_TIMER_MASKIRQ	HWREG32(ARM_TIMER_BASE + 0x414)
+#define ARM_TIMER_RELOAD	HWREG32(ARM_TIMER_BASE + 0x418)
+#define ARM_TIMER_PREDIV	HWREG32(ARM_TIMER_BASE + 0x41C)
+#define ARM_TIMER_CNTR		HWREG32(ARM_TIMER_BASE + 0x420)
+
+/*
+ *  Core Timer
+ */
+#define CTIMER_CTL          HWREG32(PER_BASE_40000000 + 0x00)  /* Control register */
+#define CTIMER_PRE          HWREG32(PER_BASE_40000000 + 0x08)  /* Core timer prescaler */
+#define CTIMER_LS32B        HWREG32(PER_BASE_40000000 + 0x1C)  /* Core timer access LS 32 bits */
+#define CTIMER_MS32B        HWREG32(PER_BASE_40000000 + 0x20)  /* Core timer access MS 32 bits */
+
+/*
+ *  ARM Core Timer
+ */
+#define C0TIMER_INTCTL      HWREG32(PER_BASE_40000000 + 0x40)  /* Core0 timers Interrupt control */
+#define C1TIMER_INTCTL      HWREG32(PER_BASE_40000000 + 0x44)  /* Core1 timers Interrupt control */
+#define C2TIMER_INTCTL      HWREG32(PER_BASE_40000000 + 0x48)  /* Core2 timers Interrupt control */
+#define C3TIMER_INTCTL      HWREG32(PER_BASE_40000000 + 0x4C)  /* Core3 timers Interrupt control */
+
+/*
+ *  ARM Core Mailbox interrupt
+ */
+#define C0MB_INTCTL         HWREG32(PER_BASE_40000000 + 0x50)  /* Core0 Mailboxes Interrupt control */
+#define C1MB_INTCTL         HWREG32(PER_BASE_40000000 + 0x54)  /* Core1 Mailboxes Interrupt control */
+#define C2MB_INTCTL         HWREG32(PER_BASE_40000000 + 0x58)  /* Core2 Mailboxes Interrupt control */
+#define C3MB_INTCTL         HWREG32(PER_BASE_40000000 + 0x5C)  /* Core3 Mailboxes Interrupt control */
+
+/*
+ *  ARM Core IRQ/FIQ status
+ */
+#define C0_IRQSOURCE        HWREG32(PER_BASE_40000000 + 0x60)  /* Core0 IRQ Source */
+#define C1_IRQSOURCE        HWREG32(PER_BASE_40000000 + 0x64)  /* Core1 IRQ Source */
+#define C2_IRQSOURCE        HWREG32(PER_BASE_40000000 + 0x68)  /* Core2 IRQ Source */
+#define C3_IRQSOURCE        HWREG32(PER_BASE_40000000 + 0x6C)  /* Core3 IRQ Source */
+#define C0_FIQSOURCE        HWREG32(PER_BASE_40000000 + 0x70)  /* Core0 FIQ Source */
+#define C1_FIQSOURCE        HWREG32(PER_BASE_40000000 + 0x74)  /* Core1 FIQ Source */
+#define C2_FIQSOURCE        HWREG32(PER_BASE_40000000 + 0x78)  /* Core2 FIQ Source */
+#define C3_FIQSOURCE        HWREG32(PER_BASE_40000000 + 0x7C)  /* Core3 FIQ Source */
+
+#define IRQ_ARM_TIMER           0
+#define IRQ_ARM_MAILBOX         1
+#define IRQ_ARM_DB0             2
+#define IRQ_ARM_DB1             3
+#define IRQ_ARM_GPU0_HALT       4
+#define IRQ_ARM_GPU1_HALT       5
+#define IRQ_ARM_ILLEGAL_ACC1    6
+#define IRQ_ARM_ILLEGAL_ACC0    7
+
+#define IRQ_AUX                 29
+#define IRQ_IIC_SPI_SLV         43
+#define IRQ_PWA0                45
+#define IRQ_PWA1                46
+#define IRQ_SMI                 48
+#define IRQ_GPIO0               49
+#define IRQ_GPIO1               50
+#define IRQ_GPIO2               51
+#define IRQ_GPIO3               52
+#define IRQ_IIC                 53
+#define IRQ_SPI                 54
+#define IRQ_PCM                 55
+#define IRQ_UART                57
+
+#endif
+

bsp/raspi2/driver/board.c

@@ -0,0 +1,90 @@
+/*
+ * File      : board.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2017, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ */
+
+#include <rthw.h>
+#include <rtthread.h>
+
+#include "board.h"
+#include "drv_uart.h"
+
+void rt_hw_timer_isr(int vector, void *parameter)
+{
+    ARM_TIMER_IRQCLR = 0;
+
+    rt_tick_increase();
+}
+
+int rt_hw_timer_init(void)
+{
+    /* timer_clock = apb_clock/(pre_divider + 1) */
+    ARM_TIMER_PREDIV = (250 - 1);
+
+    ARM_TIMER_RELOAD = 0;
+    ARM_TIMER_LOAD   = 0;
+    ARM_TIMER_IRQCLR = 0;
+    ARM_TIMER_CTRL   = 0;
+
+    ARM_TIMER_RELOAD = 10000;
+    ARM_TIMER_LOAD   = 10000;
+
+    /* 23-bit counter, enable interrupt, enable timer */
+    ARM_TIMER_CTRL   = (1 << 1) | (1 << 5) | (1 << 7);
+
+    rt_hw_interrupt_install(IRQ_ARM_TIMER, rt_hw_timer_isr, RT_NULL, "tick");
+    rt_hw_interrupt_umask(IRQ_ARM_TIMER);
+
+    return 0;
+}
+
+void vector_copy(void)
+{
+    rt_memcpy((void*)0x0, (void*)0x8000, 64);
+}
+
+void rt_hw_board_init(void)
+{
+    /* initialize hardware interrupt */
+    rt_hw_interrupt_init();
+    vector_copy();
+
+    /* initialize uart */
+    rt_hw_uart_init();
+
+#ifdef RT_USING_CONSOLE
+    /* set console device */
+    rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
+#endif /* RT_USING_CONSOLE */
+
+#ifdef RT_USING_HEAP
+    /* initialize memory system */
+    rt_kprintf("heap: 0x%08x - 0x%08x\n", RT_HW_HEAP_BEGIN, RT_HW_HEAP_END);
+    rt_system_heap_init(RT_HW_HEAP_BEGIN, RT_HW_HEAP_END);
+#endif
+
+    /* initialize timer for os tick */
+    // rt_hw_timer_init();
+
+#ifdef RT_USING_COMPONENTS_INIT
+    rt_components_board_init();
+#endif
+}

bsp/raspi2/driver/board.h

@@ -0,0 +1,42 @@
+/*
+ * File      : board.h
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2017, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2017-5-30      Bernard      the first version
+ */
+
+#ifndef BOARD_H__
+#define BOARD_H__
+
+#include <stdint.h>
+
+#include <rthw.h>
+#include <bcm283x.h>
+
+extern unsigned char __bss_start;
+extern unsigned char __bss_end;
+
+#define RT_HW_HEAP_BEGIN    (void*)&__bss_end
+#define RT_HW_HEAP_END      (void*)(0x0 + 4 * 1024 * 1024)
+
+void rt_hw_board_init(void);
+
+#endif
+

bsp/raspi2/driver/drv_gpio.c

@@ -0,0 +1,76 @@
+/*
+ * File      : drv_gpio.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2017, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ */
+
+#include <rtdevice.h>
+#include <rtthread.h>
+#include "drv_gpio.h"
+
+static void hw_pin_mode(struct rt_device *device, rt_base_t pin, rt_base_t mode)
+{
+    return ;
+}
+
+static void hw_pin_write(struct rt_device *device, rt_base_t pin, rt_base_t value)
+{
+    return ;
+}
+
+static int hw_pin_read(struct rt_device *device, rt_base_t pin)
+{
+    return 0;
+}
+
+static rt_err_t hw_pin_attach_irq(struct rt_device *device, rt_int32_t pin,
+                  rt_uint32_t mode, void (*hdr)(void *args), void *args)
+{
+    return RT_EOK;
+}
+
+static rt_err_t hw_pin_detach_irq(struct rt_device *device, rt_int32_t pin)
+{
+    return RT_EOK;
+}
+
+static rt_err_t hw_pin_irq_enable(struct rt_device *device, rt_base_t pin, rt_uint32_t enabled)
+{
+    return RT_EOK;
+}
+
+struct rt_pin_ops _hw_pin_ops =
+{
+    hw_pin_mode,
+    hw_pin_write,
+    hw_pin_read,
+
+    hw_pin_attach_irq,
+    hw_pin_detach_irq,
+    hw_pin_irq_enable
+};
+
+int hw_gpio_init(void)
+{
+    rt_device_pin_register("gpio", &_hw_pin_ops , RT_NULL);
+
+    return 0;
+}
+INIT_BOARD_EXPORT(hw_gpio_init);

bsp/raspi2/driver/drv_gpio.h

@@ -0,0 +1,29 @@
+/*
+ * File      : drv_gpio.h
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2017, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ */
+
+#ifndef DRV_GPIO_H__
+#define DRV_GPIO_H__
+
+int hw_gpio_init(void);
+
+#endif

bsp/raspi2/driver/drv_uart.c

@@ -0,0 +1,199 @@
+/*
+ * File      : drv_uart.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2017, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018/5/5       Bernard      The first version
+ */
+
+#include <rthw.h>
+#include <rtthread.h>
+#include <rtdevice.h>
+
+#include "board.h"
+#include "drv_uart.h"
+
+#include <rtdevice.h>
+
+#define AUX_BASE            (0x3F000000 + 0x215000)
+
+struct hw_uart_device
+{
+    rt_uint32_t hw_base;
+    rt_uint32_t irqno;
+};
+
+static rt_err_t uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
+{
+    struct hw_uart_device *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = (struct hw_uart_device *)serial->parent.user_data;
+
+    if (uart->hw_base == AUX_BASE)
+    {
+        uint32_t value;
+
+        /* GPIO function set */
+        value = GPIO_GPFSEL1;
+        value &= ~(7<<12); /* GPIO14 */
+        value |=    2<<12 ; /* ALT5 */
+        value &= ~(7<<15); /* GPIO15 */
+        value |=    2<<15 ; /* ALT5 */
+        GPIO_GPFSEL1 = value;
+
+        /* PullUD disable */
+        GPIO_GPPUD = 0;
+        GPIO_GPPUDCLK0 = (1 << 14) | (1 << 15);
+        GPIO_GPPUDCLK0 = 0;
+
+        AUX_ENABLES(uart->hw_base)      = 1;    /* Enable UART1 */
+        AUX_MU_IER_REG(uart->hw_base)   = 0;    /* Disable interrupt */
+        AUX_MU_CNTL_REG(uart->hw_base)  = 0;    /* Disable Transmitter and Receiver */
+        AUX_MU_LCR_REG(uart->hw_base)   = 3;    /* Works in 8-bit mode */
+        AUX_MU_MCR_REG(uart->hw_base)   = 0;    /* Disable RTS */
+        AUX_MU_IIR_REG(uart->hw_base)   = 0xC6; /* Enable FIFO, Clear FIFO */
+        AUX_MU_BAUD_REG(uart->hw_base)  = 270;  /* 115200 = system clock 250MHz / (8 * (baud + 1)), baud = 270 */
+        AUX_MU_CNTL_REG(uart->hw_base)  = 3;    /* Enable Transmitter and Receiver */
+    }
+
+    return RT_EOK;
+}
+
+static rt_err_t uart_control(struct rt_serial_device *serial, int cmd, void *arg)
+{
+    struct hw_uart_device *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = (struct hw_uart_device *)serial->parent.user_data;
+
+    switch (cmd)
+    {
+    case RT_DEVICE_CTRL_CLR_INT:
+        /* disable rx irq */
+        AUX_MU_IER_REG(uart->hw_base) = 0x0;
+        rt_hw_interrupt_mask(uart->irqno);
+        break;
+
+    case RT_DEVICE_CTRL_SET_INT:
+        /* enable rx irq */
+        AUX_MU_IER_REG(uart->hw_base) = 0x1;
+        rt_hw_interrupt_umask(uart->irqno);
+        break;
+    }
+
+    return RT_EOK;
+}
+
+static int uart_putc(struct rt_serial_device *serial, char c)
+{
+    struct hw_uart_device *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = (struct hw_uart_device *)serial->parent.user_data;
+
+    while (!(AUX_MU_LSR_REG(uart->hw_base) & 0x20));
+    AUX_MU_IO_REG(uart->hw_base) = c;
+
+    return 1;
+}
+
+static int uart_getc(struct rt_serial_device *serial)
+{
+    int ch = -1;
+    struct hw_uart_device *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = (struct hw_uart_device *)serial->parent.user_data;
+
+    if ((AUX_MU_LSR_REG(uart->hw_base) & 0x01))
+    {
+        ch = AUX_MU_IO_REG(uart->hw_base) & 0xff;
+    }
+
+    return ch;
+}
+
+static const struct rt_uart_ops _uart_ops =
+{
+    uart_configure,
+    uart_control,
+    uart_putc,
+    uart_getc,
+};
+
+static void rt_hw_uart_isr(int irqno, void *param)
+{
+    struct rt_serial_device *serial = (struct rt_serial_device*)param;
+
+    rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
+}
+
+#ifdef RT_USING_UART0
+/* UART device driver structure */
+static struct hw_uart_device _uart0_device =
+{
+    RPI_UART0_BASE,
+    IRQ_PBA8_UART0,
+};
+static struct rt_serial_device _serial0;
+#endif
+
+#ifdef RT_USING_UART1
+/* UART1 device driver structure */
+static struct hw_uart_device _uart1_device =
+{
+    AUX_BASE,
+    IRQ_AUX,
+};
+static struct rt_serial_device _serial1;
+#endif
+
+int rt_hw_uart_init(void)
+{
+    struct hw_uart_device *uart;
+    struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
+
+#ifdef RT_USING_UART0
+    uart = &_uart0_device;
+
+    _serial0.ops    = &_uart_ops;
+    _serial0.config = config;
+
+    /* register UART1 device */
+    rt_hw_serial_register(&_serial0, "uart0",
+                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
+                          uart);
+    rt_hw_interrupt_install(uart->irqno, rt_hw_uart_isr, &_serial0, "uart0");
+#endif
+
+#ifdef RT_USING_UART1
+    uart = &_uart1_device;
+    _serial1.ops = &_uart_ops;
+    _serial1.config = config;
+
+    /* register UART1 device */
+    rt_hw_serial_register(&_serial1, "uart1",
+                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX, uart);
+    /* enable Rx and Tx of UART */
+    rt_hw_interrupt_install(uart->irqno, rt_hw_uart_isr, &_serial1, "uart1");
+#endif
+
+    return 0;
+}

bsp/raspi2/driver/drv_uart.h

@@ -0,0 +1,56 @@
+/*
+ * File      : drv_uart.h
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2017, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2017-5-30      Bernard      the first version
+ */
+
+
+#ifndef DRV_UART_H__
+#define DRV_UART_H__
+
+/*
+ *  Auxiliary
+ */
+#define AUX_IRQ(BASE)             HWREG32(BASE + 0x00)   /* Auxiliary Interrupt status 3 */
+#define AUX_ENABLES(BASE)         HWREG32(BASE + 0x04)   /* Auxiliary enables 3bit */
+#define AUX_MU_IO_REG(BASE)       HWREG32(BASE + 0x40)   /* Mini Uart I/O Data 8bit */
+#define AUX_MU_IER_REG(BASE)      HWREG32(BASE + 0x44)   /* Mini Uart Interrupt Enable 8bit */
+#define AUX_MU_IIR_REG(BASE)      HWREG32(BASE + 0x48)   /* Mini Uart Interrupt Identify 8bit */
+#define AUX_MU_LCR_REG(BASE)      HWREG32(BASE + 0x4C)   /* Mini Uart Line Control 8bit */
+#define AUX_MU_MCR_REG(BASE)      HWREG32(BASE + 0x50)   /* Mini Uart Modem Control 8bit */
+#define AUX_MU_LSR_REG(BASE)      HWREG32(BASE + 0x54)   /* Mini Uart Line Status 8bit */
+#define AUX_MU_MSR_REG(BASE)      HWREG32(BASE + 0x58)   /* Mini Uart Modem Status 8bit */
+#define AUX_MU_SCRATCH(BASE)      HWREG32(BASE + 0x5C)   /* Mini Uart Scratch 8bit */
+#define AUX_MU_CNTL_REG(BASE)     HWREG32(BASE + 0x60)   /* Mini Uart Extra Control 8bit */
+#define AUX_MU_STAT_REG(BASE)     HWREG32(BASE + 0x64)   /* Mini Uart Extra Status 32bit */
+#define AUX_MU_BAUD_REG(BASE)     HWREG32(BASE + 0x68)   /* Mini Uart Baudrate 16bit */
+#define AUX_SPI0_CNTL0_REG(BASE)  HWREG32(BASE + 0x80)   /* SPI 1 Control register 0 32bit */
+#define AUX_SPI0_CNTL1_REG(BASE)  HWREG32(BASE + 0x84)   /* SPI 1 Control register 1 8bit */
+#define AUX_SPI0_STAT_REG(BASE)   HWREG32(BASE + 0x88)   /* SPI 1 Status 32bit */
+#define AUX_SPI0_IO_REG(BASE)     HWREG32(BASE + 0x90)   /* SPI 1 Data 32bit */
+#define AUX_SPI0_PEEK_REG(BASE)   HWREG32(BASE + 0x94)   /* SPI 1 Peek 16bit */
+#define AUX_SPI1_CNTL0_REG(BASE)  HWREG32(BASE + 0xC0)   /* SPI 2 Control register 0 32bit */
+#define AUX_SPI1_CNTL1_REG(BASE)  HWREG32(BASE + 0xC4)   /* SPI 2 Control register 1 8bit */
+
+int rt_hw_uart_init(void);
+
+#endif /* DRV_UART_H__ */
+

bsp/raspi2/link.lds

@@ -0,0 +1,149 @@
+/*
+ * File      : link.lds
+ * COPYRIGHT (C) 2017, RT-Thread Development Team
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Change Logs:
+ * 2017-5-30     bernard       first version
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+
+SECTIONS
+{
+    . = 0x00008000;
+    . = ALIGN(4);
+    .text :
+    {
+        *(.vectors)
+        *(.text)                        /* remaining code */
+        *(.text.*)                      /* remaining code */
+
+        *(.rodata)                      /* read-only data (constants) */
+        *(.rodata*)
+        *(.glue_7)
+        *(.glue_7t)
+        *(.gnu.linkonce.t*)
+
+        /* section information for finsh shell */
+        . = ALIGN(4);
+        __fsymtab_start = .;
+        KEEP(*(FSymTab))
+        __fsymtab_end = .;
+        . = ALIGN(4);
+        __vsymtab_start = .;
+        KEEP(*(VSymTab))
+        __vsymtab_end = .;
+        . = ALIGN(4);
+
+        /* section information for initial. */
+        . = ALIGN(4);
+        __rt_init_start = .;
+        KEEP(*(SORT(.rti_fn*)))
+        __rt_init_end = .;
+        . = ALIGN(4);
+
+        . = ALIGN(4);
+        _etext = .;
+    }
+
+    .eh_frame_hdr :
+    {
+         *(.eh_frame_hdr)
+         *(.eh_frame_entry)
+    }
+    .eh_frame : ONLY_IF_RO { KEEP (*(.eh_frame)) }
+
+    . = ALIGN(4);
+    .data :
+    {
+     *(.data)
+     *(.data.*)
+
+     *(.data1)
+     *(.data1.*)
+
+     . = ALIGN(8);
+     _gp = ABSOLUTE(.);     /* Base of small data */
+
+     *(.sdata)
+     *(.sdata.*)
+    }
+
+    . = ALIGN(4);
+    .ctors :
+    {
+        PROVIDE(__ctors_start__ = .);
+        KEEP(*(SORT(.ctors.*)))
+        KEEP(*(.ctors))
+        PROVIDE(__ctors_end__ = .);
+    }
+
+    .dtors :
+    {
+        PROVIDE(__dtors_start__ = .);
+        KEEP(*(SORT(.dtors.*)))
+        KEEP(*(.dtors))
+        PROVIDE(__dtors_end__ = .);
+    }
+
+    . = ALIGN(4);
+    .bss :
+    {
+        PROVIDE(__bss_start = .);
+        *(.bss)
+        *(.bss.*)
+        *(.dynbss)
+        *(COMMON)
+        PROVIDE(__bss_end = .);
+    }
+    _end = .;
+
+    /* Stabs debugging sections.  */
+    .stab          0 : { *(.stab) }
+    .stabstr       0 : { *(.stabstr) }
+    .stab.excl     0 : { *(.stab.excl) }
+    .stab.exclstr  0 : { *(.stab.exclstr) }
+    .stab.index    0 : { *(.stab.index) }
+    .stab.indexstr 0 : { *(.stab.indexstr) }
+    .comment       0 : { *(.comment) }
+    /* DWARF debug sections.
+     * Symbols in the DWARF debugging sections are relative to the beginning
+     * of the section so we begin them at 0.  */
+    /* DWARF 1 */
+    .debug          0 : { *(.debug) }
+    .line           0 : { *(.line) }
+    /* GNU DWARF 1 extensions */
+    .debug_srcinfo  0 : { *(.debug_srcinfo) }
+    .debug_sfnames  0 : { *(.debug_sfnames) }
+    /* DWARF 1.1 and DWARF 2 */
+    .debug_aranges  0 : { *(.debug_aranges) }
+    .debug_pubnames 0 : { *(.debug_pubnames) }
+    /* DWARF 2 */
+    .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+    .debug_abbrev   0 : { *(.debug_abbrev) }
+    .debug_line     0 : { *(.debug_line) }
+    .debug_frame    0 : { *(.debug_frame) }
+    .debug_str      0 : { *(.debug_str) }
+    .debug_loc      0 : { *(.debug_loc) }
+    .debug_macinfo  0 : { *(.debug_macinfo) }
+    /* SGI/MIPS DWARF 2 extensions */
+    .debug_weaknames 0 : { *(.debug_weaknames) }
+    .debug_funcnames 0 : { *(.debug_funcnames) }
+    .debug_typenames 0 : { *(.debug_typenames) }
+    .debug_varnames  0 : { *(.debug_varnames) }
+}

bsp/raspi2/qemu-dbg.bat

@@ -0,0 +1 @@
+qemu-system-arm -M raspi2 --kernel rtthread.elf -serial vc -serial stdio -S -s

bsp/raspi2/qemu.bat

@@ -0,0 +1 @@
+qemu-system-arm -M raspi2 --kernel rtthread.elf -serial vc -serial stdio

bsp/raspi2/rtconfig.h

@@ -0,0 +1,152 @@
+#ifndef RT_CONFIG_H__
+#define RT_CONFIG_H__
+
+/* Automatically generated file; DO NOT EDIT. */
+/* RT-Thread Project Configuration */
+
+/* RT-Thread Kernel */
+
+#define RT_NAME_MAX 8
+#define RT_ALIGN_SIZE 4
+#define RT_THREAD_PRIORITY_32
+#define RT_THREAD_PRIORITY_MAX 32
+#define RT_TICK_PER_SECOND 100
+#define RT_DEBUG
+#define RT_USING_OVERFLOW_CHECK
+#define RT_DEBUG_INIT 0
+#define RT_DEBUG_THREAD 0
+#define RT_USING_HOOK
+#define IDLE_THREAD_STACK_SIZE 1024
+
+/* Inter-Thread communication */
+
+#define RT_USING_SEMAPHORE
+#define RT_USING_MUTEX
+#define RT_USING_EVENT
+#define RT_USING_MAILBOX
+#define RT_USING_MESSAGEQUEUE
+
+/* Memory Management */
+
+#define RT_USING_MEMPOOL
+#define RT_USING_SMALL_MEM
+#define RT_USING_HEAP
+
+/* Kernel Device Object */
+
+#define RT_USING_DEVICE
+#define RT_USING_CONSOLE
+#define RT_CONSOLEBUF_SIZE 128
+#define RT_CONSOLE_DEVICE_NAME "uart1"
+#define ARCH_ARM
+#define ARCH_ARM_CORTEX_A
+#define ARCH_ARM_CORTEX_A7
+
+/* RT-Thread Components */
+
+#define RT_USING_COMPONENTS_INIT
+#define RT_USING_USER_MAIN
+#define RT_MAIN_THREAD_STACK_SIZE 2048
+
+/* C++ features */
+
+
+/* Command shell */
+
+#define RT_USING_FINSH
+#define FINSH_THREAD_NAME "tshell"
+#define FINSH_USING_HISTORY
+#define FINSH_HISTORY_LINES 5
+#define FINSH_USING_SYMTAB
+#define FINSH_USING_DESCRIPTION
+#define FINSH_THREAD_PRIORITY 20
+#define FINSH_THREAD_STACK_SIZE 4096
+#define FINSH_CMD_SIZE 80
+#define FINSH_USING_MSH
+#define FINSH_USING_MSH_DEFAULT
+#define FINSH_USING_MSH_ONLY
+
+/* Device virtual file system */
+
+
+/* Device Drivers */
+
+#define RT_USING_DEVICE_IPC
+#define RT_USING_SERIAL
+#define RT_USING_PIN
+
+/* Using USB */
+
+
+/* POSIX layer and C standard library */
+
+#define RT_USING_LIBC
+
+/* Network stack */
+
+/* light weight TCP/IP stack */
+
+
+/* Modbus master and slave stack */
+
+
+/* VBUS(Virtual Software BUS) */
+
+
+/* Utilities */
+
+
+/* RT-Thread online packages */
+
+/* IoT - internet of things */
+
+
+/* Wi-Fi */
+
+/* Marvell WiFi */
+
+
+/* Wiced WiFi */
+
+
+/* security packages */
+
+
+/* language packages */
+
+
+/* multimedia packages */
+
+
+/* tools packages */
+
+
+/* system packages */
+
+/* RT-Thread GUI Engine */
+
+
+/* peripheral libraries and drivers */
+
+
+/* miscellaneous packages */
+
+
+/* sample package */
+
+
+/* example package: hello */
+
+
+/* Privated Packages of RealThread */
+
+
+/* Network Utilities */
+
+
+/* Test Packages of RealThread */
+
+#define BCM2836_SOC
+#define RT_USING_UART1
+
+#endif

bsp/raspi2/rtconfig.py

@@ -0,0 +1,53 @@
+import os
+
+# toolchains options
+ARCH        ='arm'
+CPU         ='cortex-a7'
+CROSS_TOOL  ='gcc'
+
+if os.getenv('RTT_ROOT'):
+    RTT_ROOT = os.getenv('RTT_ROOT')
+else:
+    RTT_ROOT = r'rt-thread'
+
+if os.getenv('RTT_CC'):
+    CROSS_TOOL = os.getenv('RTT_CC')
+
+PLATFORM    = 'gcc'
+EXEC_PATH   = r'/opt/gcc-arm-none-eabi-4_8-2014q1_gri/bin'
+
+if os.getenv('RTT_EXEC_PATH'):
+    EXEC_PATH = os.getenv('RTT_EXEC_PATH')
+
+BUILD = 'debug'
+
+if PLATFORM == 'gcc':
+    # toolchains
+    PREFIX = 'arm-none-eabi-'
+    CC      = PREFIX + 'gcc'
+    CXX     = PREFIX + 'g++'
+    AS      = PREFIX + 'gcc'
+    AR      = PREFIX + 'ar'
+    LINK    = PREFIX + 'gcc'
+    TARGET_EXT = 'elf'
+    SIZE    = PREFIX + 'size'
+    OBJDUMP = PREFIX + 'objdump'
+    OBJCPY  = PREFIX + 'objcopy'
+
+    DEVICE = ' -mfpu=neon-vfpv4 -mfloat-abi=softfp -march=armv7-a -mtune=cortex-a7 -ftree-vectorize -ffast-math'
+    CFLAGS = DEVICE + ' -Wall'
+    AFLAGS = ' -c' + ' -x assembler-with-cpp -D__ASSEMBLY__'
+    LFLAGS  = DEVICE + ' -nostartfiles -Wl,--gc-sections,-Map=rtthread.map,-cref,-u,system_vectors -T link.lds'
+    CPATH   = ''
+    LPATH   = ''
+
+    if BUILD == 'debug':
+        CFLAGS += ' -O0 -gdwarf-2'
+        AFLAGS += ' -gdwarf-2'
+    else:
+        CFLAGS += ' -O2'
+
+    CXXFLAGS = CFLAGS
+
+DUMP_ACTION = OBJDUMP + ' -D -S $TARGET > rtt.asm\n'
+POST_ACTION = OBJCPY + ' -O binary $TARGET kernel7.img\n' + SIZE + ' $TARGET \n'