[nuvoton] Sync to 4.1.0.

1. Remove dfs_posix.h including for syncing 4.1.0.
2. Fix issue in crypto driver.
3. Add LVGLv81 supporting in NuMaker-M2354 BSP.
4. Update USB board menu in M480 BSP.

bsp/nuvoton/libraries/m2354/rtt_port/drv_crc.c

@@ -44,8 +44,10 @@ static rt_uint32_t nu_crc_run(
 {
     uint32_t u32CalChecksum = 0;
     uint32_t i = 0;
+    rt_err_t result;
 
-    rt_mutex_take(&s_CRC_mutex, RT_WAITING_FOREVER);
+    result = rt_mutex_take(&s_CRC_mutex, RT_WAITING_FOREVER);
+    RT_ASSERT(result == RT_EOK);
 
     /* Configure CRC controller  */
     CRC_Open(u32OpMode, u32Attr, u32Seed, CRC_CPU_WDATA_8);
@@ -85,7 +87,9 @@ static rt_uint32_t nu_crc_run(
 
     /* Get checksum value */
     u32CalChecksum = CRC_GetChecksum();
-    rt_mutex_release(&s_CRC_mutex);
+
+    result = rt_mutex_release(&s_CRC_mutex);
+    RT_ASSERT(result == RT_EOK);
 
     return u32CalChecksum;
 }
@@ -93,9 +97,7 @@ static rt_uint32_t nu_crc_run(
 rt_err_t nu_crc_init(void)
 {
     SYS_ResetModule(CRC_RST);
-
-    rt_mutex_init(&s_CRC_mutex, NU_CRYPTO_CRC_NAME, RT_IPC_FLAG_PRIO);
-    return RT_EOK;
+    return rt_mutex_init(&s_CRC_mutex, NU_CRYPTO_CRC_NAME, RT_IPC_FLAG_PRIO);
 }
 
 rt_uint32_t nu_crc_update(struct hwcrypto_crc *ctx, const rt_uint8_t *in, rt_size_t length)

bsp/nuvoton/libraries/m2354/rtt_port/drv_crypto.c

@@ -37,7 +37,6 @@ typedef struct
     uint32_t u32BlockSize;
 } S_SHA_CONTEXT;
 
-
 /* Private functions ------------------------------------------------------------*/
 static rt_err_t nu_hwcrypto_create(struct rt_hwcrypto_ctx *ctx);
 static void nu_hwcrypto_destroy(struct rt_hwcrypto_ctx *ctx);
@@ -67,57 +66,32 @@ static struct rt_mutex s_SHA_mutex;
 
 #if !defined(BSP_USING_TRNG)
     static struct rt_mutex s_PRNG_mutex;
-    static volatile int s_PRNG_done;
 #endif
 
-static volatile int s_AES_done;
-static volatile int s_SHA_done;
-
 static rt_err_t nu_crypto_init(void)
 {
-    /* Enable Crypto engine interrupt */
-    NVIC_EnableIRQ(CRPT_IRQn);
+    rt_err_t result = RT_EOK;
 
+    /* init cipher mutex */
+#if defined(RT_HWCRYPTO_USING_AES)
+    result = rt_mutex_init(&s_AES_mutex, NU_HWCRYPTO_AES_NAME, RT_IPC_FLAG_PRIO);
+    RT_ASSERT(result == RT_EOK);
     AES_ENABLE_INT(CRPT);
+#endif
+
+#if defined(RT_HWCRYPTO_USING_SHA1) || defined(RT_HWCRYPTO_USING_SHA2)
+    result = rt_mutex_init(&s_SHA_mutex, NU_HWCRYPTO_SHA_NAME, RT_IPC_FLAG_PRIO);
+    RT_ASSERT(result == RT_EOK);
     SHA_ENABLE_INT(CRPT);
+#endif
 
-    //init cipher mutex
-    rt_mutex_init(&s_AES_mutex, NU_HWCRYPTO_AES_NAME, RT_IPC_FLAG_PRIO);
-    rt_mutex_init(&s_SHA_mutex, NU_HWCRYPTO_SHA_NAME, RT_IPC_FLAG_PRIO);
-#if !defined(BSP_USING_TRNG)
+#if defined(RT_HWCRYPTO_USING_RNG) && !defined(BSP_USING_TRNG)
+    result = rt_mutex_init(&s_PRNG_mutex, NU_HWCRYPTO_PRNG_NAME, RT_IPC_FLAG_PRIO);
+    RT_ASSERT(result == RT_EOK);
     PRNG_ENABLE_INT(CRPT);
-    rt_mutex_init(&s_PRNG_mutex, NU_HWCRYPTO_PRNG_NAME, RT_IPC_FLAG_PRIO);
 #endif
 
-    return RT_EOK;
-}
-
-//Crypto engine IRQ handler
-void CRPT_IRQHandler()
-{
-    if (AES_GET_INT_FLAG(CRPT))
-    {
-        if (CRPT->INTSTS & (CRPT_INTSTS_AESEIF_Msk) || (CRPT->AES_STS & (CRPT_AES_STS_BUSERR_Msk | CRPT_AES_STS_CNTERR_Msk | (0x1ul << 21))))
-            rt_kprintf("AES ERROR\n");
-        s_AES_done = 1;
-        AES_CLR_INT_FLAG(CRPT);
-    }
-
-    if (SHA_GET_INT_FLAG(CRPT))
-    {
-        if (CRPT->INTSTS & (CRPT_INTSTS_HMACEIF_Msk) || (CRPT->HMAC_STS & (CRPT_HMAC_STS_DMAERR_Msk | (0x1ul << 9))))
-            rt_kprintf("SHA ERROR\n");
-        s_SHA_done = 1;
-        SHA_CLR_INT_FLAG(CRPT);
-    }
-
-#if !defined(BSP_USING_TRNG)
-    if (PRNG_GET_INT_FLAG(CRPT))
-    {
-        s_PRNG_done = 1;
-        PRNG_CLR_INT_FLAG(CRPT);
-    }
-#endif
+    return result;
 }
 
 static rt_err_t nu_aes_crypt_run(
@@ -133,6 +107,7 @@ static rt_err_t nu_aes_crypt_run(
 {
     uint32_t au32SwapKey[8];
     uint32_t au32SwapIV[4];
+    rt_err_t result;
 
     au32SwapKey[0] = nu_get32_be(&pu8Key[0]);
     au32SwapKey[1] = nu_get32_be(&pu8Key[4]);
@@ -156,22 +131,34 @@ static rt_err_t nu_aes_crypt_run(
     au32SwapIV[2] = nu_get32_be(&pu8IV[8]);
     au32SwapIV[3] = nu_get32_be(&pu8IV[12]);
 
-    rt_mutex_take(&s_AES_mutex, RT_WAITING_FOREVER);
+    result = rt_mutex_take(&s_AES_mutex, RT_WAITING_FOREVER);
+    RT_ASSERT(result == RT_EOK);
 
     //Using Channel 0
     AES_Open(CRPT, 0, bEncrypt, u32OpMode, u32KeySize, AES_IN_OUT_SWAP);
-    AES_SetKey(CRPT, 0, (uint32_t *)au32SwapKey, u32KeySize);
+    AES_SetKey(CRPT, 0, (uint32_t *)&au32SwapKey[0], u32KeySize);
     AES_SetInitVect(CRPT, 0, (uint32_t *)au32SwapIV);
 
     //Setup AES DMA
     AES_SetDMATransfer(CRPT, 0, (uint32_t)pu8InData, (uint32_t)pu8OutData, u32DataLen);
     AES_CLR_INT_FLAG(CRPT);
-    //Start AES encryption/decryption
-    s_AES_done = 0;
+
+    /* Start AES encryption/decryption */
     AES_Start(CRPT, 0, CRYPTO_DMA_ONE_SHOT);
-    while (!s_AES_done) {};
 
-    rt_mutex_release(&s_AES_mutex);
+    /* Wait done */
+    while (!(CRPT->INTSTS & CRPT_INTEN_AESIEN_Msk)) {};
+
+    if ((u32DataLen % 16) && (CRPT->AES_STS & (CRPT_AES_STS_OUTBUFEMPTY_Msk | CRPT_AES_STS_INBUFEMPTY_Msk)))
+        rt_kprintf("AES WARNING - AES Data length(%d) is not enough. -> %d \n", u32DataLen, RT_ALIGN(u32DataLen, 16));
+    else if (CRPT->INTSTS & (CRPT_INTSTS_AESEIF_Msk) || (CRPT->AES_STS & (CRPT_AES_STS_BUSERR_Msk | CRPT_AES_STS_CNTERR_Msk)))
+        rt_kprintf("AES ERROR - CRPT->INTSTS-%08x, CRPT->AES_STS-%08x\n", CRPT->INTSTS, CRPT->AES_STS);
+
+    /* Clear AES interrupt status */
+    AES_CLR_INT_FLAG(CRPT);
+
+    result = rt_mutex_release(&s_AES_mutex);
+    RT_ASSERT(result == RT_EOK);
 
     return RT_EOK;
 }
@@ -180,28 +167,38 @@ static rt_err_t nu_aes_crypt_run(
 //Using PRNG instead of TRNG
 static void nu_prng_open(uint32_t u32Seed)
 {
-    rt_mutex_take(&s_PRNG_mutex, RT_WAITING_FOREVER);
+    rt_err_t result;
+
+    result = rt_mutex_take(&s_PRNG_mutex, RT_WAITING_FOREVER);
+    RT_ASSERT(result == RT_EOK);
 
-    //Open PRNG 128 bits. But always return 32 bits
+    //Open PRNG 128 bits.
     PRNG_Open(CRPT, PRNG_KEY_SIZE_128, PRNG_SEED_RELOAD, u32Seed);
 
-    rt_mutex_release(&s_PRNG_mutex);
+    result = rt_mutex_release(&s_PRNG_mutex);
+    RT_ASSERT(result == RT_EOK);
 }
 
 static rt_uint32_t nu_prng_run(void)
 {
-    uint32_t au32RNGValue[2];
+    uint32_t au32RNGValue[4];
+    rt_err_t result;
 
-    rt_mutex_take(&s_PRNG_mutex, RT_WAITING_FOREVER);
+    result = rt_mutex_take(&s_PRNG_mutex, RT_WAITING_FOREVER);
+    RT_ASSERT(result == RT_EOK);
 
-    s_PRNG_done = 0;
     PRNG_Start(CRPT);
-    while (!s_PRNG_done) {};
+    while ((CRPT->PRNG_CTL & CRPT_PRNG_CTL_BUSY_Msk)) {};
+
+    /* Clear PRNG interrupt status */
+    PRNG_CLR_INT_FLAG(CRPT);
 
-    PRNG_Read(CRPT, au32RNGValue);
+    PRNG_Read(CRPT, &au32RNGValue[0]);
 
-    rt_mutex_release(&s_PRNG_mutex);
-    return au32RNGValue[0];
+    result = rt_mutex_release(&s_PRNG_mutex);
+    RT_ASSERT(result == RT_EOK);
+
+    return au32RNGValue[0] ^ au32RNGValue[1] ^ au32RNGValue[2] ^ au32RNGValue[3];
 }
 
 #endif
@@ -214,6 +211,8 @@ static rt_err_t nu_aes_crypt(struct hwcrypto_symmetric *symmetric_ctx, struct hw
     unsigned char in_align_flag = 0;
     unsigned char out_align_flag = 0;
     unsigned char iv_temp[16];
+    RT_ASSERT(symmetric_ctx != RT_NULL);
+    RT_ASSERT(symmetric_info != RT_NULL);
 
     if ((symmetric_info->length % 4) != 0)
     {
@@ -336,18 +335,23 @@ static void SHABlockUpdate(uint32_t u32OpMode, uint32_t u32SrcAddr, uint32_t u32
 
     //Setup SHA DMA
     SHA_SetDMATransfer(CRPT, u32SrcAddr, u32Len);
-    SHA_CLR_INT_FLAG(CRPT);
-
-    //Start SHA
-    s_SHA_done = 0;
 
     if (u32Mode == CRYPTO_DMA_FIRST)
         CRPT->HMAC_CTL |= CRPT_HMAC_CTL_DMAFIRST_Msk;
     else
         CRPT->HMAC_CTL &= ~CRPT_HMAC_CTL_DMAFIRST_Msk;
+    //Start SHA
+    SHA_CLR_INT_FLAG(CRPT);
     SHA_Start(CRPT, u32Mode);
 
-    while (!s_SHA_done) {};
+    /* Wait done */
+    while (!(CRPT->INTSTS & CRPT_INTSTS_HMACIF_Msk)) {};
+
+    if (CRPT->INTSTS & (CRPT_INTSTS_HMACEIF_Msk) || (CRPT->HMAC_STS & (CRPT_HMAC_STS_DMAERR_Msk)))
+        rt_kprintf("SHA ERROR - CRPT->INTSTS-%08x, CRPT->HMAC_STS-%08x\n", CRPT->INTSTS, CRPT->HMAC_STS);
+
+    /* Clear SHA interrupt status */
+    SHA_CLR_INT_FLAG(CRPT);
 }
 
 static rt_err_t nu_sha_hash_run(
@@ -357,12 +361,18 @@ static rt_err_t nu_sha_hash_run(
     uint32_t u32DataLen
 )
 {
-    rt_mutex_take(&s_SHA_mutex, RT_WAITING_FOREVER);
+    rt_err_t result;
+
+    RT_ASSERT(psSHACtx != RT_NULL);
+    RT_ASSERT(pu8InData != RT_NULL);
+
+    result = rt_mutex_take(&s_SHA_mutex, RT_WAITING_FOREVER);
+    RT_ASSERT(result == RT_EOK);
 
     uint8_t *pu8SrcAddr = (uint8_t *)pu8InData;
     uint32_t u32CopyLen = 0;
 
-    while ((psSHACtx->u32SHATempBufLen + u32DataLen) >= psSHACtx->u32BlockSize)
+    while ((psSHACtx->u32SHATempBufLen + u32DataLen) > psSHACtx->u32BlockSize)
     {
         if (psSHACtx->pu8SHATempBuf)
         {
@@ -397,7 +407,8 @@ static rt_err_t nu_sha_hash_run(
             if (psSHACtx->pu8SHATempBuf == RT_NULL)
             {
                 LOG_E("fun[%s] memory allocate %d bytes failed!", __FUNCTION__, psSHACtx->u32BlockSize);
-                rt_mutex_release(&s_SHA_mutex);
+                result = rt_mutex_release(&s_SHA_mutex);
+                RT_ASSERT(result == RT_EOK);
                 return -RT_ENOMEM;
             }
 
@@ -425,7 +436,8 @@ static rt_err_t nu_sha_hash_run(
             if (psSHACtx->pu8SHATempBuf == RT_NULL)
             {
                 LOG_E("fun[%s] memory allocate %d bytes failed!", __FUNCTION__, psSHACtx->u32BlockSize);
-                rt_mutex_release(&s_SHA_mutex);
+                result = rt_mutex_release(&s_SHA_mutex);
+                RT_ASSERT(result == RT_EOK);
                 return -RT_ENOMEM;
             }
 
@@ -436,7 +448,8 @@ static rt_err_t nu_sha_hash_run(
         psSHACtx->u32SHATempBufLen += u32DataLen;
     }
 
-    rt_mutex_release(&s_SHA_mutex);
+    result = rt_mutex_release(&s_SHA_mutex);
+    RT_ASSERT(result == RT_EOK);
 
     return RT_EOK;
 }
@@ -446,6 +459,8 @@ static rt_err_t nu_sha_update(struct hwcrypto_hash *hash_ctx, const rt_uint8_t *
     uint32_t u32SHAOpMode;
     unsigned char *nu_in;
     unsigned char in_align_flag = 0;
+    RT_ASSERT(hash_ctx != RT_NULL);
+    RT_ASSERT(in != RT_NULL);
 
     //Select SHA operation mode
     switch (hash_ctx->parent.type & (HWCRYPTO_MAIN_TYPE_MASK | HWCRYPTO_SUB_TYPE_MASK))
@@ -500,7 +515,11 @@ static rt_err_t nu_sha_finish(struct hwcrypto_hash *hash_ctx, rt_uint8_t *out, r
     unsigned char *nu_out;
     unsigned char out_align_flag = 0;
     uint32_t u32SHAOpMode;
-    S_SHA_CONTEXT *psSHACtx = hash_ctx->parent.contex;
+    S_SHA_CONTEXT *psSHACtx = RT_NULL;
+    RT_ASSERT(hash_ctx != RT_NULL);
+    RT_ASSERT(out != RT_NULL);
+
+    psSHACtx = hash_ctx->parent.contex;
 
     //Check SHA Hash value buffer length
     switch (hash_ctx->parent.type & (HWCRYPTO_MAIN_TYPE_MASK | HWCRYPTO_SUB_TYPE_MASK))
@@ -639,6 +658,7 @@ static const struct hwcrypto_rng_ops nu_rng_ops =
 static rt_err_t nu_hwcrypto_create(struct rt_hwcrypto_ctx *ctx)
 {
     rt_err_t res = RT_EOK;
+    RT_ASSERT(ctx != RT_NULL);
 
     switch (ctx->type & HWCRYPTO_MAIN_TYPE_MASK)
     {
@@ -672,18 +692,6 @@ static rt_err_t nu_hwcrypto_create(struct rt_hwcrypto_ctx *ctx)
     }
 
     case HWCRYPTO_TYPE_SHA1:
-    {
-        ctx->contex = rt_malloc(sizeof(S_SHA_CONTEXT));
-
-        if (ctx->contex == RT_NULL)
-            return -RT_ERROR;
-
-        rt_memset(ctx->contex, 0, sizeof(S_SHA_CONTEXT));
-        //Setup SHA1 operation
-        ((struct hwcrypto_hash *)ctx)->ops = &nu_sha_ops;
-        break;
-    }
-
     case HWCRYPTO_TYPE_SHA2:
     {
         ctx->contex = rt_malloc(sizeof(S_SHA_CONTEXT));
@@ -692,7 +700,7 @@ static rt_err_t nu_hwcrypto_create(struct rt_hwcrypto_ctx *ctx)
             return -RT_ERROR;
 
         rt_memset(ctx->contex, 0, sizeof(S_SHA_CONTEXT));
-        //Setup SHA2 operation
+        //Setup operation
         ((struct hwcrypto_hash *)ctx)->ops = &nu_sha_ops;
         break;
     }
@@ -718,11 +726,15 @@ static rt_err_t nu_hwcrypto_create(struct rt_hwcrypto_ctx *ctx)
         break;
     }
 
+    nu_hwcrypto_reset(ctx);
+
     return res;
 }
 
 static void nu_hwcrypto_destroy(struct rt_hwcrypto_ctx *ctx)
 {
+    RT_ASSERT(ctx != RT_NULL);
+
     if (ctx->contex)
         rt_free(ctx->contex);
 }
@@ -730,6 +742,8 @@ static void nu_hwcrypto_destroy(struct rt_hwcrypto_ctx *ctx)
 static rt_err_t nu_hwcrypto_clone(struct rt_hwcrypto_ctx *des, const struct rt_hwcrypto_ctx *src)
 {
     rt_err_t res = RT_EOK;
+    RT_ASSERT(des != RT_NULL);
+    RT_ASSERT(src != RT_NULL);
 
     if (des->contex && src->contex)
     {
@@ -791,6 +805,7 @@ static void nu_hwcrypto_reset(struct rt_hwcrypto_ctx *ctx)
 
 int nu_hwcrypto_device_init(void)
 {
+    rt_err_t result;
     static struct rt_hwcrypto_device nu_hwcrypto_dev;
 
     nu_hwcrypto_dev.ops = &nu_hwcrypto_ops;
@@ -809,11 +824,9 @@ int nu_hwcrypto_device_init(void)
     nu_trng_init();
 #endif
 
-    // register hwcrypto operation
-    if (rt_hwcrypto_register(&nu_hwcrypto_dev, RT_HWCRYPTO_DEFAULT_NAME) != RT_EOK)
-    {
-        return -1;
-    }
+    /* register hwcrypto operation */
+    result = rt_hwcrypto_register(&nu_hwcrypto_dev, RT_HWCRYPTO_DEFAULT_NAME);
+    RT_ASSERT(result == RT_EOK);
 
     return 0;
 }

bsp/nuvoton/libraries/m2354/rtt_port/drv_sdh.c

@@ -20,12 +20,12 @@
 #include <string.h>
 
 #if defined(RT_USING_DFS)
-#include <dfs_fs.h>
-#include <dfs_file.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <sys/stat.h>
-#include <sys/statfs.h>
+    #include <dfs_fs.h>
+    #include <dfs_file.h>
+    #include <unistd.h>
+    #include <stdio.h>
+    #include <sys/stat.h>
+    #include <sys/statfs.h>
 #endif
 
 /* Private define ---------------------------------------------------------------*/

bsp/nuvoton/libraries/m2354/rtt_port/drv_trng.c

@@ -71,10 +71,8 @@ rt_uint32_t nu_trng_rand(struct hwcrypto_rng *ctx)
 {
     if (!s_i32TRNGEnable)
     {
-        uint32_t u32RNGValue;
-        //use software rand
-        u32RNGValue = rand();
-        return u32RNGValue;
+        /* Use software rand */
+        return (rt_uint32_t)rand();
     }
 
     return nu_trng_run();

bsp/nuvoton/libraries/m480/rtt_port/drv_crc.c

@@ -96,14 +96,8 @@ static rt_uint32_t nu_crc_run(
 
 rt_err_t nu_crc_init(void)
 {
-    rt_err_t result;
-
     SYS_ResetModule(CRC_RST);
-
-    result = rt_mutex_init(&s_CRC_mutex, NU_CRYPTO_CRC_NAME, RT_IPC_FLAG_PRIO);
-    RT_ASSERT(result == RT_EOK);
-
-    return RT_EOK;
+    return rt_mutex_init(&s_CRC_mutex, NU_CRYPTO_CRC_NAME, RT_IPC_FLAG_PRIO);
 }
 
 rt_uint32_t nu_crc_update(struct hwcrypto_crc *ctx, const rt_uint8_t *in, rt_size_t length)

bsp/nuvoton/libraries/m480/rtt_port/drv_crypto.c

@@ -30,7 +30,6 @@
 #endif
 
 /* Private typedef --------------------------------------------------------------*/
-
 typedef struct
 {
     uint8_t *pu8SHATempBuf;
@@ -72,76 +71,38 @@ static struct rt_mutex s_SHA_mutex;
 
 #if !defined(BSP_USING_TRNG)
     static struct rt_mutex s_PRNG_mutex;
-    static volatile int s_PRNG_done;
 #endif
 
-static volatile int s_AES_done;
-static volatile int s_TDES_done;
-static volatile int s_SHA_done;
-
 static rt_err_t nu_crypto_init(void)
 {
-    rt_err_t result;
+    rt_err_t result = RT_EOK;
 
-    /* Enable Crypto engine interrupt */
-    NVIC_EnableIRQ(CRPT_IRQn);
-
-    AES_ENABLE_INT(CRPT);
-    TDES_ENABLE_INT(CRPT);
-    SHA_ENABLE_INT(CRPT);
-
-    //init cipher mutex
+    /* init cipher mutex */
+#if defined(RT_HWCRYPTO_USING_AES)
     result = rt_mutex_init(&s_AES_mutex, NU_HWCRYPTO_AES_NAME, RT_IPC_FLAG_PRIO);
     RT_ASSERT(result == RT_EOK);
+    AES_ENABLE_INT(CRPT);
+#endif
 
+#if defined(RT_HWCRYPTO_USING_3DES)
     result = rt_mutex_init(&s_TDES_mutex, NU_HWCRYPTO_TDES_NAME, RT_IPC_FLAG_PRIO);
     RT_ASSERT(result == RT_EOK);
+    TDES_ENABLE_INT(CRPT);
+#endif
 
+#if defined(RT_HWCRYPTO_USING_SHA1) || defined(RT_HWCRYPTO_USING_SHA2)
     result = rt_mutex_init(&s_SHA_mutex, NU_HWCRYPTO_SHA_NAME, RT_IPC_FLAG_PRIO);
     RT_ASSERT(result == RT_EOK);
+    SHA_ENABLE_INT(CRPT);
+#endif
 
-#if !defined(BSP_USING_TRNG)
-    PRNG_ENABLE_INT(CRPT);
+#if defined(RT_HWCRYPTO_USING_RNG) && !defined(BSP_USING_TRNG)
     result = rt_mutex_init(&s_PRNG_mutex, NU_HWCRYPTO_PRNG_NAME, RT_IPC_FLAG_PRIO);
     RT_ASSERT(result == RT_EOK);
+    PRNG_ENABLE_INT(CRPT);
 #endif
 
-    return RT_EOK;
-}
-
-//Crypto engine IRQ handler
-
-void CRYPTO_IRQHandler()
-{
-    if (AES_GET_INT_FLAG(CRPT))
-    {
-        if (CRPT->INTSTS & (CRPT_INTSTS_AESEIF_Msk) || (CRPT->AES_STS & (CRPT_AES_STS_BUSERR_Msk | CRPT_AES_STS_CNTERR_Msk | (0x1ul << 21))))
-            rt_kprintf("AES ERROR\n");
-        s_AES_done = 1;
-        AES_CLR_INT_FLAG(CRPT);
-    }
-
-    if (TDES_GET_INT_FLAG(CRPT))
-    {
-        s_TDES_done = 1;
-        TDES_CLR_INT_FLAG(CRPT);
-    }
-
-    if (SHA_GET_INT_FLAG(CRPT))
-    {
-        if (CRPT->INTSTS & (CRPT_INTSTS_HMACEIF_Msk) || (CRPT->HMAC_STS & (CRPT_HMAC_STS_DMAERR_Msk | (0x1ul << 9))))
-            rt_kprintf("SHA ERROR\n");
-        s_SHA_done = 1;
-        SHA_CLR_INT_FLAG(CRPT);
-    }
-
-#if !defined(BSP_USING_TRNG)
-    if (PRNG_GET_INT_FLAG(CRPT))
-    {
-        s_PRNG_done = 1;
-        PRNG_CLR_INT_FLAG(CRPT);
-    }
-#endif
+    return result;
 }
 
 static rt_err_t nu_aes_crypt_run(
@@ -155,10 +116,9 @@ static rt_err_t nu_aes_crypt_run(
     uint32_t u32DataLen
 )
 {
-    rt_err_t result;
-
     uint32_t au32SwapKey[8];
     uint32_t au32SwapIV[4];
+    rt_err_t result;
 
     au32SwapKey[0] = nu_get32_be(&pu8Key[0]);
     au32SwapKey[1] = nu_get32_be(&pu8Key[4]);
@@ -187,16 +147,26 @@ static rt_err_t nu_aes_crypt_run(
 
     //Using Channel 0
     AES_Open(CRPT, 0, bEncrypt, u32OpMode, u32KeySize, AES_IN_OUT_SWAP);
-    AES_SetKey(CRPT, 0, (uint32_t *)au32SwapKey, u32KeySize);
+    AES_SetKey(CRPT, 0, (uint32_t *)&au32SwapKey[0], u32KeySize);
     AES_SetInitVect(CRPT, 0, (uint32_t *)au32SwapIV);
 
     //Setup AES DMA
     AES_SetDMATransfer(CRPT, 0, (uint32_t)pu8InData, (uint32_t)pu8OutData, u32DataLen);
     AES_CLR_INT_FLAG(CRPT);
-    //Start AES encryption/decryption
-    s_AES_done = 0;
+
+    /* Start AES encryption/decryption */
     AES_Start(CRPT, 0, CRYPTO_DMA_ONE_SHOT);
-    while (!s_AES_done) {};
+
+    /* Wait done */
+    while (!(CRPT->INTSTS & CRPT_INTEN_AESIEN_Msk)) {};
+
+    if ((u32DataLen % 16) && (CRPT->AES_STS & (CRPT_AES_STS_OUTBUFEMPTY_Msk | CRPT_AES_STS_INBUFEMPTY_Msk)))
+        rt_kprintf("AES WARNING - AES Data length(%d) is not enough. -> %d \n", u32DataLen, RT_ALIGN(u32DataLen, 16));
+    else if (CRPT->INTSTS & (CRPT_INTSTS_AESEIF_Msk) || (CRPT->AES_STS & (CRPT_AES_STS_BUSERR_Msk | CRPT_AES_STS_CNTERR_Msk)))
+        rt_kprintf("AES ERROR - CRPT->INTSTS-%08x, CRPT->AES_STS-%08x\n", CRPT->INTSTS, CRPT->AES_STS);
+
+    /* Clear AES interrupt status */
+    AES_CLR_INT_FLAG(CRPT);
 
     result = rt_mutex_release(&s_AES_mutex);
     RT_ASSERT(result == RT_EOK);
@@ -213,32 +183,33 @@ static void nu_prng_open(uint32_t u32Seed)
     result = rt_mutex_take(&s_PRNG_mutex, RT_WAITING_FOREVER);
     RT_ASSERT(result == RT_EOK);
 
-    //Open PRNG 64 bits. But always return 32 bits
+    //Open PRNG 64 bits.
     PRNG_Open(CRPT, PRNG_KEY_SIZE_64, PRNG_SEED_RELOAD, u32Seed);
 
     result = rt_mutex_release(&s_PRNG_mutex);
     RT_ASSERT(result == RT_EOK);
-
 }
 
 static rt_uint32_t nu_prng_run(void)
 {
-    rt_err_t result;
     uint32_t au32RNGValue[2];
+    rt_err_t result;
 
     result = rt_mutex_take(&s_PRNG_mutex, RT_WAITING_FOREVER);
     RT_ASSERT(result == RT_EOK);
 
-    s_PRNG_done = 0;
     PRNG_Start(CRPT);
-    while (!s_PRNG_done) {};
+    while ((CRPT->PRNG_CTL & CRPT_PRNG_CTL_BUSY_Msk)) {};
+
+    /* Clear PRNG interrupt status */
+    PRNG_CLR_INT_FLAG(CRPT);
 
-    PRNG_Read(CRPT, au32RNGValue);
+    PRNG_Read(CRPT, &au32RNGValue[0]);
 
     result = rt_mutex_release(&s_PRNG_mutex);
     RT_ASSERT(result == RT_EOK);
 
-    return au32RNGValue[0];
+    return au32RNGValue[0] ^ au32RNGValue[1];
 }
 
 #endif
@@ -251,6 +222,8 @@ static rt_err_t nu_aes_crypt(struct hwcrypto_symmetric *symmetric_ctx, struct hw
     unsigned char in_align_flag = 0;
     unsigned char out_align_flag = 0;
     unsigned char iv_temp[16];
+    RT_ASSERT(symmetric_ctx != RT_NULL);
+    RT_ASSERT(symmetric_info != RT_NULL);
 
     if ((symmetric_info->length % 4) != 0)
     {
@@ -408,10 +381,11 @@ static rt_err_t nu_des_crypt_run(
     //Setup TDES DMA
     TDES_SetDMATransfer(CRPT, 0, (uint32_t)pu8InData, (uint32_t)pu8OutData, u32DataLen);
     TDES_CLR_INT_FLAG(CRPT);
+
     //Start TDES encryption/decryption
-    s_TDES_done = 0;
     TDES_Start(CRPT, 0, CRYPTO_DMA_ONE_SHOT);
-    while (!s_TDES_done) {};
+    /* Wait done */
+    while (!(CRPT->INTSTS & CRPT_INTEN_TDESIEN_Msk)) {};
 
     result = rt_mutex_release(&s_TDES_mutex);
     RT_ASSERT(result == RT_EOK);
@@ -521,10 +495,6 @@ static void SHABlockUpdate(uint32_t u32OpMode, uint32_t u32SrcAddr, uint32_t u32
 
     //Setup SHA DMA
     SHA_SetDMATransfer(CRPT, u32SrcAddr, u32Len);
-    SHA_CLR_INT_FLAG(CRPT);
-
-    //Start SHA
-    s_SHA_done = 0;
 
     if (u32Mode == CRYPTO_DMA_FIRST)
     {
@@ -547,10 +517,18 @@ static void SHABlockUpdate(uint32_t u32OpMode, uint32_t u32SrcAddr, uint32_t u32
             CRPT->HMAC_CTL &= ~CRPT_HMAC_CTL_DMAFIRST_Msk;
         }
     }
-
+    //Start SHA
+    SHA_CLR_INT_FLAG(CRPT);
     SHA_Start(CRPT, u32Mode);
 
-    while (!s_SHA_done) {};
+    /* Wait done */
+    while (!(CRPT->INTSTS & CRPT_INTSTS_HMACIF_Msk)) {};
+
+    if (CRPT->INTSTS & (CRPT_INTSTS_HMACEIF_Msk) || (CRPT->HMAC_STS & (CRPT_HMAC_STS_DMAERR_Msk)))
+        rt_kprintf("SHA ERROR - CRPT->INTSTS-%08x, CRPT->HMAC_STS-%08x\n", CRPT->INTSTS, CRPT->HMAC_STS);
+
+    /* Clear SHA interrupt status */
+    SHA_CLR_INT_FLAG(CRPT);
 }
 
 static rt_err_t nu_sha_hash_run(
@@ -562,6 +540,9 @@ static rt_err_t nu_sha_hash_run(
 {
     rt_err_t result;
 
+    RT_ASSERT(psSHACtx != RT_NULL);
+    RT_ASSERT(pu8InData != RT_NULL);
+
     result = rt_mutex_take(&s_SHA_mutex, RT_WAITING_FOREVER);
     RT_ASSERT(result == RT_EOK);
 
@@ -603,10 +584,8 @@ static rt_err_t nu_sha_hash_run(
             if (psSHACtx->pu8SHATempBuf == RT_NULL)
             {
                 LOG_E("fun[%s] memory allocate %d bytes failed!", __FUNCTION__, psSHACtx->u32BlockSize);
-
                 result = rt_mutex_release(&s_SHA_mutex);
                 RT_ASSERT(result == RT_EOK);
-
                 return -RT_ENOMEM;
             }
 
@@ -634,10 +613,8 @@ static rt_err_t nu_sha_hash_run(
             if (psSHACtx->pu8SHATempBuf == RT_NULL)
             {
                 LOG_E("fun[%s] memory allocate %d bytes failed!", __FUNCTION__, psSHACtx->u32BlockSize);
-
                 result = rt_mutex_release(&s_SHA_mutex);
                 RT_ASSERT(result == RT_EOK);
-
                 return -RT_ENOMEM;
             }
 
@@ -659,6 +636,8 @@ static rt_err_t nu_sha_update(struct hwcrypto_hash *hash_ctx, const rt_uint8_t *
     uint32_t u32SHAOpMode;
     unsigned char *nu_in;
     unsigned char in_align_flag = 0;
+    RT_ASSERT(hash_ctx != RT_NULL);
+    RT_ASSERT(in != RT_NULL);
 
     //Select SHA operation mode
     switch (hash_ctx->parent.type & (HWCRYPTO_MAIN_TYPE_MASK | HWCRYPTO_SUB_TYPE_MASK))
@@ -713,7 +692,11 @@ static rt_err_t nu_sha_finish(struct hwcrypto_hash *hash_ctx, rt_uint8_t *out, r
     unsigned char *nu_out;
     unsigned char out_align_flag = 0;
     uint32_t u32SHAOpMode;
-    S_SHA_CONTEXT *psSHACtx = hash_ctx->parent.contex;
+    S_SHA_CONTEXT *psSHACtx = RT_NULL;
+    RT_ASSERT(hash_ctx != RT_NULL);
+    RT_ASSERT(out != RT_NULL);
+
+    psSHACtx = hash_ctx->parent.contex;
 
     //Check SHA Hash value buffer length
     switch (hash_ctx->parent.type & (HWCRYPTO_MAIN_TYPE_MASK | HWCRYPTO_SUB_TYPE_MASK))
@@ -857,6 +840,7 @@ static const struct hwcrypto_rng_ops nu_rng_ops =
 static rt_err_t nu_hwcrypto_create(struct rt_hwcrypto_ctx *ctx)
 {
     rt_err_t res = RT_EOK;
+    RT_ASSERT(ctx != RT_NULL);
 
     switch (ctx->type & HWCRYPTO_MAIN_TYPE_MASK)
     {
@@ -890,35 +874,16 @@ static rt_err_t nu_hwcrypto_create(struct rt_hwcrypto_ctx *ctx)
     }
 
     case HWCRYPTO_TYPE_DES:
-    {
-        ctx->contex = RT_NULL;
-        //Setup DES operation
-        ((struct hwcrypto_symmetric *)ctx)->ops = &nu_des_ops;
-        break;
-    }
-
     case HWCRYPTO_TYPE_3DES:
     {
         ctx->contex = RT_NULL;
-        //Setup 3DES operation
+        //Setup operation
         ((struct hwcrypto_symmetric *)ctx)->ops = &nu_des_ops;
         break;
     }
 
 
     case HWCRYPTO_TYPE_SHA1:
-    {
-        ctx->contex = rt_malloc(sizeof(S_SHA_CONTEXT));
-
-        if (ctx->contex == RT_NULL)
-            return -RT_ERROR;
-
-        rt_memset(ctx->contex, 0, sizeof(S_SHA_CONTEXT));
-        //Setup SHA1 operation
-        ((struct hwcrypto_hash *)ctx)->ops = &nu_sha_ops;
-        break;
-    }
-
     case HWCRYPTO_TYPE_SHA2:
     {
         ctx->contex = rt_malloc(sizeof(S_SHA_CONTEXT));
@@ -927,7 +892,7 @@ static rt_err_t nu_hwcrypto_create(struct rt_hwcrypto_ctx *ctx)
             return -RT_ERROR;
 
         rt_memset(ctx->contex, 0, sizeof(S_SHA_CONTEXT));
-        //Setup SHA2 operation
+        //Setup operation
         ((struct hwcrypto_hash *)ctx)->ops = &nu_sha_ops;
         break;
     }
@@ -953,11 +918,15 @@ static rt_err_t nu_hwcrypto_create(struct rt_hwcrypto_ctx *ctx)
         break;
     }
 
+    nu_hwcrypto_reset(ctx);
+
     return res;
 }
 
 static void nu_hwcrypto_destroy(struct rt_hwcrypto_ctx *ctx)
 {
+    RT_ASSERT(ctx != RT_NULL);
+
     if (ctx->contex)
         rt_free(ctx->contex);
 }
@@ -965,6 +934,8 @@ static void nu_hwcrypto_destroy(struct rt_hwcrypto_ctx *ctx)
 static rt_err_t nu_hwcrypto_clone(struct rt_hwcrypto_ctx *des, const struct rt_hwcrypto_ctx *src)
 {
     rt_err_t res = RT_EOK;
+    RT_ASSERT(des != RT_NULL);
+    RT_ASSERT(src != RT_NULL);
 
     if (des->contex && src->contex)
     {
@@ -1015,8 +986,8 @@ static void nu_hwcrypto_reset(struct rt_hwcrypto_ctx *ctx)
         }
         break;
     }
-#endif
 
+#endif
     default:
         break;
     }
@@ -1026,6 +997,7 @@ static void nu_hwcrypto_reset(struct rt_hwcrypto_ctx *ctx)
 
 int nu_hwcrypto_device_init(void)
 {
+    rt_err_t result;
     static struct rt_hwcrypto_device nu_hwcrypto_dev;
 
     nu_hwcrypto_dev.ops = &nu_hwcrypto_ops;
@@ -1044,11 +1016,9 @@ int nu_hwcrypto_device_init(void)
     nu_trng_init();
 #endif
 
-    // register hwcrypto operation
-    if (rt_hwcrypto_register(&nu_hwcrypto_dev, RT_HWCRYPTO_DEFAULT_NAME) != RT_EOK)
-    {
-        return -1;
-    }
+    /* register hwcrypto operation */
+    result = rt_hwcrypto_register(&nu_hwcrypto_dev, RT_HWCRYPTO_DEFAULT_NAME);
+    RT_ASSERT(result == RT_EOK);
 
     return 0;
 }

bsp/nuvoton/libraries/m480/rtt_port/drv_sdh.c

@@ -20,12 +20,12 @@
 #include <string.h>
 
 #if defined(RT_USING_DFS)
-#include <dfs_fs.h>
-#include <dfs_file.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <sys/stat.h>
-#include <sys/statfs.h>
+    #include <dfs_fs.h>
+    #include <dfs_file.h>
+    #include <unistd.h>
+    #include <stdio.h>
+    #include <sys/stat.h>
+    #include <sys/statfs.h>
 #endif
 
 /* Private define ---------------------------------------------------------------*/

bsp/nuvoton/libraries/m480/rtt_port/drv_trng.c

@@ -77,10 +77,8 @@ rt_uint32_t nu_trng_rand(struct hwcrypto_rng *ctx)
 {
     if (!s_i32TRNGEnable)
     {
-        uint32_t u32RNGValue;
-        //use software rand
-        u32RNGValue = rand();
-        return u32RNGValue;
+        /* Use software rand */
+        return (rt_uint32_t)rand();
     }
 
     return nu_trng_run();

bsp/nuvoton/libraries/n9h30/rtt_port/drv_adc_touch.c

@@ -15,7 +15,11 @@
 
 #include "NuMicro.h"
 #include <rtdevice.h>
-#include <dfs_posix.h>
+#include <dfs_file.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <sys/stat.h>
+#include <sys/statfs.h>
 #include "drv_adc.h"
 #include "touch.h"
 

bsp/nuvoton/libraries/n9h30/rtt_port/drv_sdh.c

@@ -20,12 +20,12 @@
 #include <drv_sys.h>
 
 #if defined(RT_USING_DFS)
-#include <dfs_fs.h>
-#include <dfs_file.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <sys/stat.h>
-#include <sys/statfs.h>
+    #include <dfs_fs.h>
+    #include <dfs_file.h>
+    #include <unistd.h>
+    #include <stdio.h>
+    #include <sys/stat.h>
+    #include <sys/statfs.h>
 #endif
 
 /* Private define ---------------------------------------------------------------*/

bsp/nuvoton/libraries/nu_packages/ILI9341/lcd_ili9341.c

@@ -17,10 +17,6 @@
 #include <rtdevice.h>
 #include <lcd_ili9341.h>
 
-#if defined(NU_PKG_ILI9341_WITH_OFFSCREEN_FRAMEBUFFER)
-    #define DEF_VRAM_BUFFER_NUMBER  2
-#endif
-
 static struct rt_device_graphic_info g_Ili9341Info =
 {
     .bits_per_pixel = 16,
@@ -275,16 +271,9 @@ static rt_err_t ili9341_lcd_control(rt_device_t dev, int cmd, void *args)
     case RTGRAPHIC_CTRL_RECT_UPDATE:
     {
 #if defined(NU_PKG_ILI9341_WITH_OFFSCREEN_FRAMEBUFFER)
-        struct rt_device_rect_info *psRectInfo = args;
+        struct rt_device_rect_info *psRectInfo = (struct rt_device_rect_info *)args;
         rt_uint16_t *pixels  = (rt_uint16_t *)g_Ili9341Info.framebuffer;
-        RT_ASSERT(args != RT_NULL);
-
-        if (psRectInfo->y >= g_Ili9341Info.height)
-        {
-            int buf_id = psRectInfo->y / g_Ili9341Info.height;
-            pixels += g_Ili9341Info.width * g_Ili9341Info.height * buf_id;
-            psRectInfo->y %= g_Ili9341Info.height;
-        }
+        RT_ASSERT(args);
 
         ili9341_fillrect(pixels, psRectInfo);
 #else
@@ -325,7 +314,7 @@ int rt_hw_lcd_ili9341_init(void)
     lcd_device.user_data = &ili9341_ops;
 
 #if defined(NU_PKG_ILI9341_WITH_OFFSCREEN_FRAMEBUFFER)
-    g_Ili9341Info.framebuffer = rt_malloc_align((DEF_VRAM_BUFFER_NUMBER * g_Ili9341Info.pitch * g_Ili9341Info.height) + 32, 32);
+    g_Ili9341Info.framebuffer = rt_malloc_align((g_Ili9341Info.pitch * g_Ili9341Info.height) + 32, 32);
     RT_ASSERT(g_Ili9341Info.framebuffer != RT_NULL);
 #endif
 

bsp/nuvoton/libraries/nuc980/rtt_port/drv_adc_touch.c

@@ -15,7 +15,11 @@
 
 #include "NuMicro.h"
 #include <rtdevice.h>
-#include <dfs_posix.h>
+#include <dfs_file.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <sys/stat.h>
+#include <sys/statfs.h>
 #include "drv_adc.h"
 #include "touch.h"
 

bsp/nuvoton/libraries/nuc980/rtt_port/drv_crypto.c

@@ -57,11 +57,6 @@ static struct rt_mutex s_AES_mutex;
 static struct rt_mutex s_SHA_mutex;
 static struct rt_mutex s_PRNG_mutex;
 
-static void nu_crypto_isr(int vector, void *param)
-{
-    /* Nothing */
-}
-
 static rt_err_t nu_aes_crypt_run(
     rt_bool_t bEncrypt,
     uint32_t u32OpMode,
@@ -153,7 +148,7 @@ static void nu_prng_open(uint32_t u32Seed)
     result = rt_mutex_take(&s_PRNG_mutex, RT_WAITING_FOREVER);
     RT_ASSERT(result == RT_EOK);
 
-    //Open PRNG 64 bits. But always return 32 bits
+    //Open PRNG 64 bits
     PRNG_Open(CRPT, PRNG_KEY_SIZE_64, PRNG_SEED_RELOAD, u32Seed);
 
     result = rt_mutex_release(&s_PRNG_mutex);
@@ -179,7 +174,7 @@ static rt_uint32_t nu_prng_run(void)
     result = rt_mutex_release(&s_PRNG_mutex);
     RT_ASSERT(result == RT_EOK);
 
-    return au32RNGValue[0];
+    return au32RNGValue[0] ^ au32RNGValue[1];
 }
 
 static rt_err_t nu_aes_crypt(struct hwcrypto_symmetric *symmetric_ctx, struct hwcrypto_symmetric_info *symmetric_info)
@@ -665,6 +660,8 @@ static rt_err_t nu_hwcrypto_create(struct rt_hwcrypto_ctx *ctx)
         break;
     }
 
+    nu_hwcrypto_reset(ctx);
+
     return res;
 }
 
@@ -770,9 +767,6 @@ int nu_hwcrypto_device_init(void)
     result = rt_hwcrypto_register(&nu_hwcrypto_dev, RT_HWCRYPTO_DEFAULT_NAME);
     RT_ASSERT(result == RT_EOK);
 
-    /* Enable Crypto engine interrupt */
-    rt_hw_interrupt_install(IRQ_CRYPTO, nu_crypto_isr, RT_NULL, "crypto");
-
     return 0;
 }
 INIT_DEVICE_EXPORT(nu_hwcrypto_device_init);

bsp/nuvoton/libraries/nuc980/rtt_port/drv_sdh.c

@@ -21,12 +21,12 @@
 #include <drv_sys.h>
 
 #if defined(RT_USING_DFS)
-#include <dfs_fs.h>
-#include <dfs_file.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <sys/stat.h>
-#include <sys/statfs.h>
+    #include <dfs_fs.h>
+    #include <dfs_file.h>
+    #include <unistd.h>
+    #include <stdio.h>
+    #include <sys/stat.h>
+    #include <sys/statfs.h>
 #endif
 
 /* Private define ---------------------------------------------------------------*/

bsp/nuvoton/nk-980iot/applications/lvgl/lv_port_disp.c

@@ -33,11 +33,6 @@ static void lcd_fb_flush(lv_disp_drv_t *disp_drv, const lv_area_t *area, lv_colo
     rect.width = area->x2 - area->x1 + 1;
     rect.height = area->y2 - area->y1 + 1;
 
-    if ((uint32_t)info.framebuffer != (uint32_t)color_p)
-    {
-        rect.y += info.height;
-    }
-
     rt_device_control(lcd_device, RTGRAPHIC_CTRL_RECT_UPDATE, &rect);
     lv_disp_flush_ready(disp_drv);
 }
@@ -50,8 +45,7 @@ void lcd_perf_monitor(struct _lv_disp_drv_t *disp_drv, uint32_t time, uint32_t p
 void lv_port_disp_init(void)
 {
     rt_err_t result;
-    void *buf_1 = RT_NULL;
-    void *buf_2 = RT_NULL;
+    void *buf1 = RT_NULL;
 
     lcd_device = rt_device_find("lcd");
     if (lcd_device == 0)
@@ -62,7 +56,7 @@ void lv_port_disp_init(void)
 
     /* get framebuffer address */
     result = rt_device_control(lcd_device, RTGRAPHIC_CTRL_GET_INFO, &info);
-    if (result != RT_EOK)
+    if (result != RT_EOK && info.framebuffer == RT_NULL)
     {
         LOG_E("error!");
         /* get device information failed */
@@ -72,12 +66,11 @@ void lv_port_disp_init(void)
     RT_ASSERT(info.bits_per_pixel == 8 || info.bits_per_pixel == 16 ||
               info.bits_per_pixel == 24 || info.bits_per_pixel == 32);
 
-    buf_1 = (void *)info.framebuffer;
-    buf_2 = (void *)((uint32_t)buf_1 + info.height * info.width * info.bits_per_pixel / 8);
-    rt_kprintf("LVGL: Use two buffers - buf_1@%08x, buf_2@%08x\n", buf_1, buf_2);
+    buf1 = (void *)info.framebuffer;
+    rt_kprintf("LVGL: Use one buffers - buf1@%08x\n", buf1);
 
     /*Initialize `disp_buf` with the buffer(s).*/
-    lv_disp_draw_buf_init(&disp_buf, buf_1, buf_2, info.width * info.height);
+    lv_disp_draw_buf_init(&disp_buf, buf1, RT_NULL, info.width * info.height);
 
     result = rt_device_open(lcd_device, 0);
     if (result != RT_EOK)

bsp/nuvoton/nk-980iot/applications/mnt.c

@@ -22,12 +22,12 @@
 #include <rtdbg.h>
 
 #if defined(RT_USING_DFS)
-#include <dfs_fs.h>
-#include <dfs_file.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <sys/stat.h>
-#include <sys/statfs.h>
+    #include <dfs_fs.h>
+    #include <dfs_file.h>
+    #include <unistd.h>
+    #include <stdio.h>
+    #include <sys/stat.h>
+    #include <sys/statfs.h>
 #endif
 
 #if defined(PKG_USING_FAL)

bsp/nuvoton/nk-n9h30/.config

@@ -310,8 +310,8 @@ CONFIG_NETDEV_IPV6=0
 #
 CONFIG_RT_USING_LWIP=y
 # CONFIG_RT_USING_LWIP141 is not set
-CONFIG_RT_USING_LWIP202=y
-# CONFIG_RT_USING_LWIP203 is not set
+# CONFIG_RT_USING_LWIP202 is not set
+CONFIG_RT_USING_LWIP203=y
 # CONFIG_RT_USING_LWIP212 is not set
 # CONFIG_RT_USING_LWIP_IPV6 is not set
 CONFIG_RT_LWIP_MEM_ALIGNMENT=4

bsp/nuvoton/nk-n9h30/applications/mnt.c

@@ -22,12 +22,12 @@
 #include <rtdbg.h>
 
 #if defined(RT_USING_DFS)
-#include <dfs_fs.h>
-#include <dfs_file.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <sys/stat.h>
-#include <sys/statfs.h>
+    #include <dfs_fs.h>
+    #include <dfs_file.h>
+    #include <unistd.h>
+    #include <stdio.h>
+    #include <sys/stat.h>
+    #include <sys/statfs.h>
 #endif
 
 #if defined(PKG_USING_FAL)

bsp/nuvoton/nk-rtu980/applications/mnt.c

@@ -22,12 +22,12 @@
 #include <rtdbg.h>
 
 #if defined(RT_USING_DFS)
-#include <dfs_fs.h>
-#include <dfs_file.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <sys/stat.h>
-#include <sys/statfs.h>
+    #include <dfs_fs.h>
+    #include <dfs_file.h>
+    #include <unistd.h>
+    #include <stdio.h>
+    #include <sys/stat.h>
+    #include <sys/statfs.h>
 #endif
 
 #if defined(PKG_USING_FAL)

bsp/nuvoton/numaker-iot-m487/.config

@@ -277,7 +277,6 @@ CONFIG_RT_USB_DEVICE_HID_MOUSE=y
 #
 # POSIX layer and C standard library
 #
-# CONFIG_RT_USING_MODULE is not set
 CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 
 #
@@ -293,7 +292,9 @@ CONFIG_RT_USING_POSIX_SELECT=y
 # CONFIG_RT_USING_POSIX_MMAN is not set
 # CONFIG_RT_USING_POSIX_DELAY is not set
 # CONFIG_RT_USING_POSIX_CLOCK is not set
+# CONFIG_RT_USING_POSIX_TIMER is not set
 # CONFIG_RT_USING_PTHREADS is not set
+# CONFIG_RT_USING_MODULE is not set
 
 #
 # Interprocess Communication (IPC)
@@ -427,7 +428,9 @@ CONFIG_PKG_AT_DEVICE_PATH="/packages/iot/at_device"
 # CONFIG_AT_DEVICE_USING_ESP32 is not set
 CONFIG_AT_DEVICE_USING_ESP8266=y
 CONFIG_AT_DEVICE_ESP8266_INIT_ASYN=y
+CONFIG_AT_DEVICE_ESP8266_SOCKET=y
 # CONFIG_AT_DEVICE_ESP8266_SAMPLE is not set
+# CONFIG_AT_DEVICE_ESP8266_SAMPLE_BSP_TAKEOVER is not set
 # CONFIG_AT_DEVICE_USING_RW007 is not set
 # CONFIG_AT_DEVICE_USING_SIM800C is not set
 # CONFIG_AT_DEVICE_USING_SIM76XX is not set
@@ -561,6 +564,7 @@ CONFIG_PKG_AT_DEVICE_VER_NUM=0x99999
 # CONFIG_PKG_USING_MCURSES is not set
 # CONFIG_PKG_USING_TERMBOX is not set
 # CONFIG_PKG_USING_VT100 is not set
+# CONFIG_PKG_USING_QRCODE is not set
 
 #
 # tools packages
@@ -571,7 +575,6 @@ CONFIG_PKG_AT_DEVICE_VER_NUM=0x99999
 # CONFIG_PKG_USING_SYSTEMVIEW is not set
 # CONFIG_PKG_USING_SEGGER_RTT is not set
 # CONFIG_PKG_USING_RDB is not set
-# CONFIG_PKG_USING_QRCODE is not set
 # CONFIG_PKG_USING_ULOG_EASYFLASH is not set
 # CONFIG_PKG_USING_ULOG_FILE is not set
 # CONFIG_PKG_USING_LOGMGR is not set
@@ -622,6 +625,7 @@ CONFIG_PKG_AT_DEVICE_VER_NUM=0x99999
 # CONFIG_PKG_USING_POSIX_GETLINE is not set
 # CONFIG_PKG_USING_POSIX_WCWIDTH is not set
 # CONFIG_PKG_USING_POSIX_ITOA is not set
+# CONFIG_PKG_USING_POSIX_STRINGS is not set
 
 #
 # acceleration: Assembly language or algorithmic acceleration packages
@@ -747,6 +751,7 @@ CONFIG_PKG_FAL_VER_NUM=0x99999
 # CONFIG_PKG_USING_SSD1306 is not set
 # CONFIG_PKG_USING_QKEY is not set
 # CONFIG_PKG_USING_RS485 is not set
+# CONFIG_PKG_USING_RS232 is not set
 # CONFIG_PKG_USING_NES is not set
 # CONFIG_PKG_USING_VIRTUAL_SENSOR is not set
 # CONFIG_PKG_USING_VDEVICE is not set
@@ -834,19 +839,8 @@ CONFIG_PKG_FAL_VER_NUM=0x99999
 # CONFIG_PKG_USING_LWGPS is not set
 # CONFIG_PKG_USING_STATE_MACHINE is not set
 # CONFIG_PKG_USING_DESIGN_PATTERN is not set
-
-#
-# Nuvoton Packages Config
-#
-CONFIG_NU_PKG_USING_UTILS=y
-CONFIG_NU_PKG_USING_DEMO=y
-CONFIG_NU_PKG_USING_BMX055=y
-# CONFIG_NU_PKG_USING_MAX31875 is not set
-CONFIG_NU_PKG_USING_NAU88L25=y
-# CONFIG_NU_PKG_USING_NAU8822 is not set
-# CONFIG_NU_PKG_USING_DA9062 is not set
-# CONFIG_NU_PKG_USING_ILI9341 is not set
-# CONFIG_NU_PKG_USING_SPINAND is not set
+# CONFIG_PKG_USING_CONTROLLER is not set
+# CONFIG_PKG_USING_PHASE_LOCKED_LOOP is not set
 
 #
 # Hardware Drivers Config
@@ -946,11 +940,11 @@ CONFIG_NU_CRC_USE_PDMA=y
 CONFIG_BSP_USING_WDT=y
 # CONFIG_BSP_USING_EBI is not set
 CONFIG_BSP_USING_USBD=y
-# CONFIG_BSP_USING_HSUSBD is not set
+CONFIG_BSP_USING_HSUSBD=y
 # CONFIG_BSP_USING_USBH is not set
 CONFIG_BSP_USING_HSUSBH=y
 CONFIG_NU_USBHOST_HUB_POLLING_INTERVAL=100
-# CONFIG_BSP_USING_HSOTG is not set
+CONFIG_BSP_USING_HSOTG=y
 
 #
 # On-board Peripheral Drivers
@@ -962,6 +956,7 @@ CONFIG_BOARD_USING_BMX055=y
 CONFIG_BOARD_USING_NAU88L25=y
 CONFIG_BOARD_USING_STORAGE_SDCARD=y
 CONFIG_BOARD_USING_STORAGE_SPIFLASH=y
+CONFIG_BOARD_USING_USB_D_H=y
 # CONFIG_BOARD_USING_HSUSBD is not set
 # CONFIG_BOARD_USING_HSUSBD_USBH is not set
 # CONFIG_BOARD_USING_HSUSBH is not set
@@ -973,5 +968,18 @@ CONFIG_BOARD_USING_HSUSBH_USBD=y
 #
 # CONFIG_BOARD_USING_MAX31875 is not set
 # CONFIG_BOARD_USING_LCD_ILI9341 is not set
+
+#
+# Nuvoton Packages Config
+#
+CONFIG_NU_PKG_USING_UTILS=y
+CONFIG_NU_PKG_USING_DEMO=y
+CONFIG_NU_PKG_USING_BMX055=y
+# CONFIG_NU_PKG_USING_MAX31875 is not set
+CONFIG_NU_PKG_USING_NAU88L25=y
+# CONFIG_NU_PKG_USING_NAU8822 is not set
+# CONFIG_NU_PKG_USING_DA9062 is not set
+# CONFIG_NU_PKG_USING_ILI9341 is not set
+# CONFIG_NU_PKG_USING_SPINAND is not set
 CONFIG_BOARD_USE_UTEST=y
 CONFIG_UTEST_CMD_PREFIX="bsp.nuvoton.numaker-iot-m487.test.utest."

bsp/nuvoton/numaker-iot-m487/applications/mnt.c

@@ -13,12 +13,12 @@
 #include <rtthread.h>
 
 #if defined(RT_USING_DFS)
-#include <dfs_fs.h>
-#include <dfs_file.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <sys/stat.h>
-#include <sys/statfs.h>
+    #include <dfs_fs.h>
+    #include <dfs_file.h>
+    #include <unistd.h>
+    #include <stdio.h>
+    #include <sys/stat.h>
+    #include <sys/statfs.h>
 #endif
 
 #if defined(PKG_USING_FAL)

bsp/nuvoton/numaker-iot-m487/board/Kconfig

@@ -54,42 +54,49 @@ menu "Hardware Drivers Config"
             select BSP_USING_QSPI0
             default y
 
-        choice
-            prompt "Select FS/HS USB Ports"
- 
-            config BOARD_USING_HSUSBD
-                select BSP_USING_HSUSBD
-                bool "Enable HSUSBD(over USB2.0)"
-                help
-                    Choose this option if you need HSUSBD function mode.
-
-            config BOARD_USING_HSUSBD_USBH
-                select BSP_USING_USBH
-                select BSP_USING_HSUSBD
-                bool "Enable HSUSBD(over USB2.0) and USBH(over USB1.1)"
-                help
-                    Choose this option if you need HSUSBD and USBH function mode at the same time.
-
-            config BOARD_USING_HSUSBH
-                select BSP_USING_HSUSBH
-                bool "Enable HSUSBH(over USB2.0)"
-                help
-                    Choose this option if you need HSUSBH function mode.
-
-            config BOARD_USING_HSUSBH_USBD
-                select BSP_USING_HSUSBH
-                select BSP_USING_USBD
-                bool "Enable HSUSBH(over USB2.0) and USBD(over USB1.1)"
-                help
-                    Choose this option if you need HSUSBH and USBD function mode at the same time.
-
-            config BOARD_USING_HSOTG
-                select BSP_USING_HSOTG
-                bool "Enable HSOTG(over USB2.0)"
-                help
-                    Choose this option if you need HSOTG function mode.
-
-        endchoice
+        config BOARD_USING_USB_D_H
+            select BSP_USING_HSOTG
+            bool "Enable USB Device or Host function"
+            help
+                Choose this option if you need USB function.
+
+        if BOARD_USING_USB_D_H
+            choice
+                prompt "Select FS/HS USB Ports"
+
+                config BOARD_USING_HSUSBD
+                    select BSP_USING_HSUSBD
+                    bool "Enable HSUSBD(over USB2.0)"
+                    help
+                        Choose this option if you need HSUSBD function mode.
+
+                config BOARD_USING_HSUSBD_USBH
+                    select BSP_USING_USBH
+                    select BSP_USING_HSUSBD
+                    bool "Enable HSUSBD(over USB2.0) and USBH(over USB1.1)"
+                    help
+                        Choose this option if you need HSUSBD and USBH function mode at the same time.
+
+                config BOARD_USING_HSUSBH
+                    select BSP_USING_HSUSBH
+                    bool "Enable HSUSBH(over USB2.0)"
+                    help
+                        Choose this option if you need HSUSBH function mode.
+
+                config BOARD_USING_HSUSBH_USBD
+                    select BSP_USING_HSUSBH
+                    select BSP_USING_USBD
+                    bool "Enable HSUSBH(over USB2.0) and USBD(over USB1.1)"
+                    help
+                        Choose this option if you need HSUSBH and USBD function mode at the same time.
+
+                config BOARD_USING_HSOTG
+                    select BSP_USING_HSOTG
+                    bool "Enable HSOTG(over USB2.0)"
+                    help
+                        Choose this option if you need HSOTG function mode.
+            endchoice
+        endif
 
     endmenu
 

bsp/nuvoton/numaker-m032ki/applications/mnt.c

@@ -13,12 +13,12 @@
 #include <rtthread.h>
 
 #if defined(RT_USING_DFS)
-#include <dfs_fs.h>
-#include <dfs_file.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <sys/stat.h>
-#include <sys/statfs.h>
+    #include <dfs_fs.h>
+    #include <dfs_file.h>
+    #include <unistd.h>
+    #include <stdio.h>
+    #include <sys/stat.h>
+    #include <sys/statfs.h>
 #endif
 
 #if defined(PKG_USING_FAL)

bsp/nuvoton/numaker-m2354/applications/SConscript

@@ -3,9 +3,19 @@
 from building import *
 
 cwd = GetCurrentDir()
+objs = []
+list = os.listdir(cwd)
+for d in list:
+    path = os.path.join(cwd, d)
+    if os.path.isfile(os.path.join(path, 'SConscript')):
+        objs = objs + SConscript(os.path.join(d, 'SConscript'))
+
 src = Glob('*.c') + Glob('*.cpp')
 CPPPATH = [cwd, str(Dir('#'))]
 
 group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
 
-Return('group')
+objs = objs + group
+
+Return('objs')
+

bsp/nuvoton/numaker-m2354/applications/lvgl/SConscript

@@ -0,0 +1,10 @@
+from building import *
+
+cwd = GetCurrentDir()
+src = Glob('*.c')
+CPPPATH = [cwd]
+
+group = DefineGroup('LVGL-port', src, depend = ['PKG_USING_LVGL'], CPPPATH = CPPPATH)
+
+Return('group')
+

bsp/nuvoton/numaker-m2354/applications/lvgl/lv_conf.h

@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2006-2021, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author        Notes
+ * 2021-10-18     Meco Man      First version
+ */
+
+#ifndef LV_CONF_H
+#define LV_CONF_H
+
+#define LV_USE_PERF_MONITOR     1
+#define LV_COLOR_DEPTH          16
+
+#define LV_HOR_RES_MAX          (320)
+#define LV_VER_RES_MAX          (240)
+
+#define LV_FONT_MONTSERRAT_12           1
+#define LV_FONT_MONTSERRAT_16           1
+#define LV_USE_DEMO_RTT_MUSIC           1
+#define LV_DEMO_RTT_MUSIC_AUTO_PLAY     1
+
+#define LV_DISP_DEF_REFR_PERIOD         16
+
+//#define CONFIG_LV_LOG_LEVEL LV_LOG_LEVEL_TRACE
+#endif

bsp/nuvoton/numaker-m2354/applications/lvgl/lv_demo.c

@@ -0,0 +1,49 @@
+/*
+ * Copyright (c) 2006-2021, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author        Notes
+ * 2021-10-17     Meco Man      First version
+ */
+#include <rtthread.h>
+#include <lvgl.h>
+#define DBG_TAG    "LVGL"
+#define DBG_LVL    DBG_INFO
+#include <rtdbg.h>
+
+#ifndef LV_THREAD_STACK_SIZE
+    #define LV_THREAD_STACK_SIZE 4096
+#endif
+
+#ifndef LV_THREAD_PRIO
+    #define LV_THREAD_PRIO (RT_THREAD_PRIORITY_MAX*2/3)
+#endif
+
+static void lvgl_thread(void *parameter)
+{
+    extern void lv_demo_music(void);
+    lv_demo_music();
+
+    while (1)
+    {
+        lv_task_handler();
+        rt_thread_mdelay(1);
+    }
+}
+
+static int lvgl_demo_init(void)
+{
+    rt_thread_t tid;
+
+    tid = rt_thread_create("LVGL", lvgl_thread, RT_NULL, LV_THREAD_STACK_SIZE, LV_THREAD_PRIO, 10);
+    if (tid == RT_NULL)
+    {
+        LOG_E("Fail to create 'LVGL' thread");
+    }
+    rt_thread_startup(tid);
+
+    return 0;
+}
+INIT_APP_EXPORT(lvgl_demo_init);

bsp/nuvoton/numaker-m2354/applications/lvgl/lv_port_disp.c

@@ -0,0 +1,99 @@
+/*
+ * Copyright (c) 2006-2021, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2021-12-17     Wayne        The first version
+ */
+#include <lvgl.h>
+
+#define LOG_TAG             "lvgl.disp"
+#define DBG_ENABLE
+#define DBG_SECTION_NAME   LOG_TAG
+#define DBG_LEVEL DBG_ERROR
+#define DBG_COLOR
+#include <rtdbg.h>
+
+/*A static or global variable to store the buffers*/
+static lv_disp_draw_buf_t disp_buf;
+static lv_disp_drv_t disp_drv;  /*Descriptor of a display driver*/
+
+static rt_device_t lcd_device = 0;
+static struct rt_device_graphic_info info;
+
+static void lcd_fb_flush(lv_disp_drv_t *disp_drv, const lv_area_t *area, lv_color_t *color_p)
+{
+    /* Rendering */
+    struct rt_device_rect_info rect;
+
+    rect.x = area->x1;
+    rect.y = area->y1;
+    rect.width = area->x2 - area->x1 + 1;
+    rect.height = area->y2 - area->y1 + 1;
+
+    rt_device_control(lcd_device, RTGRAPHIC_CTRL_RECT_UPDATE, &rect);
+    lv_disp_flush_ready(disp_drv);
+}
+
+void lcd_perf_monitor(struct _lv_disp_drv_t *disp_drv, uint32_t time, uint32_t px)
+{
+    rt_kprintf("Elapsed: %dms, Pixel: %d, Bytes:%d\n", time, px, px * sizeof(lv_color_t));
+}
+
+void lv_port_disp_init(void)
+{
+    rt_err_t result;
+    void *buf1 = RT_NULL;
+
+    lcd_device = rt_device_find("lcd");
+    if (lcd_device == 0)
+    {
+        LOG_E("error!");
+        return;
+    }
+
+    /* get framebuffer address */
+    result = rt_device_control(lcd_device, RTGRAPHIC_CTRL_GET_INFO, &info);
+    if (result != RT_EOK && info.framebuffer == RT_NULL)
+    {
+        LOG_E("error!");
+        /* get device information failed */
+        return;
+    }
+
+    RT_ASSERT(info.bits_per_pixel == 8 || info.bits_per_pixel == 16 ||
+              info.bits_per_pixel == 24 || info.bits_per_pixel == 32);
+
+    buf1 = (void *)info.framebuffer;
+    rt_kprintf("LVGL: Use one buffers - buf1@%08x\n", buf1);
+
+    /*Initialize `disp_buf` with the buffer(s).*/
+    lv_disp_draw_buf_init(&disp_buf, buf1, RT_NULL, info.width * info.height);
+
+    result = rt_device_open(lcd_device, 0);
+    if (result != RT_EOK)
+    {
+        LOG_E("error!");
+        return;
+    }
+
+    lv_disp_drv_init(&disp_drv); /*Basic initialization*/
+
+    /*Set the resolution of the display*/
+    disp_drv.hor_res = info.width;
+    disp_drv.ver_res = info.height;
+
+    /*Set a display buffer*/
+    disp_drv.draw_buf = &disp_buf;
+
+    /*Write the internal buffer (draw_buf) to the display*/
+    disp_drv.flush_cb = lcd_fb_flush;
+
+    /* Called after every refresh cycle to tell the rendering and flushing time + the number of flushed pixels */
+    //disp_drv.monitor_cb = lcd_perf_monitor;
+
+    /*Finally register the driver*/
+    lv_disp_drv_register(&disp_drv);
+}

bsp/nuvoton/numaker-m2354/applications/lvgl/lv_port_disp.h

@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2006-2021, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2021-10-18     Meco Man     The first version
+ */
+#ifndef LV_PORT_DISP_H
+#define LV_PORT_DISP_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void lv_port_disp_init(void);
+
+#ifdef __cplusplus
+} /*extern "C"*/
+#endif
+
+#endif

bsp/nuvoton/numaker-m2354/applications/lvgl/lv_port_indev.c

@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2006-2021, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2021-10-18     Meco Man     The first version
+ * 2021-12-17     Wayne        Add input event
+ */
+#include <lvgl.h>
+#include <stdbool.h>
+#include <rtdevice.h>
+#include "touch.h"
+
+static lv_indev_state_t last_state = LV_INDEV_STATE_REL;
+static rt_int16_t last_x = 0;
+static rt_int16_t last_y = 0;
+
+static void input_read(lv_indev_drv_t *indev_drv, lv_indev_data_t *data)
+{
+    data->point.x = last_x;
+    data->point.y = last_y;
+    data->state = last_state;
+}
+
+void nu_touch_inputevent_cb(rt_int16_t x, rt_int16_t y, rt_uint8_t state)
+{
+    switch (state)
+    {
+    case RT_TOUCH_EVENT_UP:
+        last_state = LV_INDEV_STATE_RELEASED;
+        break;
+    case RT_TOUCH_EVENT_DOWN:
+        last_x = x;
+        last_y = y;
+        last_state = LV_INDEV_STATE_PRESSED;
+        break;
+    case RT_TOUCH_EVENT_MOVE:
+        last_x = x;
+        last_y = y;
+        break;
+    }
+}
+
+void lv_port_indev_init(void)
+{
+    static lv_indev_drv_t indev_drv;
+
+    /* Basic initialization */
+    lv_indev_drv_init(&indev_drv);
+    indev_drv.type = LV_INDEV_TYPE_POINTER;
+    indev_drv.read_cb = input_read;
+
+    /* Register the driver in LVGL and save the created input device object */
+    lv_indev_drv_register(&indev_drv);
+}

bsp/nuvoton/numaker-m2354/applications/lvgl/lv_port_indev.h

@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2006-2021, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2021-10-18     Meco Man     The first version
+ */
+#ifndef LV_PORT_INDEV_H
+#define LV_PORT_INDEV_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <lv_hal_indev.h>
+
+extern lv_indev_t *button_indev;
+
+void lv_port_indev_init(void);
+void lv_port_indev_input(rt_int16_t x, rt_int16_t y, lv_indev_state_t state);
+
+#ifdef __cplusplus
+} /*extern "C"*/
+#endif
+
+#endif

bsp/nuvoton/numaker-m2354/board/Kconfig

@@ -61,6 +61,37 @@ menu "Hardware Drivers Config"
     endmenu
 
     menu "Board extended module drivers"
+        config BOARD_USING_LCD_ILI9341
+            bool "LCD ILI9341 (over spi1)"
+            select RT_USING_TOUCH
+            select NU_PKG_USING_ILI9341
+            select NU_PKG_USING_ILI9341_SPI
+            select NU_PKG_ILI9341_WITH_OFFSCREEN_FRAMEBUFFER
+            select NU_PKG_ILI9341_HORIZONTAL
+            select BSP_USING_SPI1
+            select PKG_USING_LVGL
+            select PKG_USING_LV_MUSIC_DEMO
+            default n
+
+        if BOARD_USING_LCD_ILI9341
+
+            config BOARD_USING_ILI9341_PIN_BACKLIGHT
+            int "Specify the pin index of backlight pin index"
+                range 0 127
+                default 43
+
+            config BOARD_USING_ILI9341_PIN_RESET
+            int "Specify the pin index of reset pin index"
+                range 0 127
+                default 9
+
+            config BOARD_USING_ILI9341_PIN_DC
+            int "Specify the pin index of data&command switching"
+                range 0 127
+                default 8
+
+        endif
+
         config BOARD_USING_SEGMENT_LCD
             bool "Segment LCD supporting.(over lcd)"
             select BSP_USING_SLCD

bsp/nuvoton/numaker-m2354/board/NuPinConfig/nutool_pincfg.c

@@ -108,7 +108,12 @@ void nutool_pincfg_deinit_epwm0(void)
 void nutool_pincfg_init_epwm1(void)
 {
     SYS->GPC_MFPH &= ~(SYS_GPC_MFPH_PC12MFP_Msk | SYS_GPC_MFPH_PC11MFP_Msk | SYS_GPC_MFPH_PC10MFP_Msk | SYS_GPC_MFPH_PC9MFP_Msk);
+#if !defined(BOARD_USING_LCD_ILI9341)
     SYS->GPC_MFPH |= (SYS_GPC_MFPH_PC12MFP_EPWM1_CH0 | SYS_GPC_MFPH_PC11MFP_EPWM1_CH1 | SYS_GPC_MFPH_PC10MFP_EPWM1_CH2 | SYS_GPC_MFPH_PC9MFP_EPWM1_CH3);
+#else
+    SYS->GPC_MFPH |= (SYS_GPC_MFPH_PC12MFP_EPWM1_CH0 | SYS_GPC_MFPH_PC10MFP_EPWM1_CH2 | SYS_GPC_MFPH_PC9MFP_EPWM1_CH3);
+#endif
+
     SYS->GPC_MFPL &= ~(SYS_GPC_MFPL_PC1MFP_Msk | SYS_GPC_MFPL_PC0MFP_Msk);
     SYS->GPC_MFPL |= (SYS_GPC_MFPL_PC1MFP_EPWM1_CH4 | SYS_GPC_MFPL_PC0MFP_EPWM1_CH5);
 
@@ -396,7 +401,9 @@ void nutool_pincfg_init(void)
     nutool_pincfg_init_spi0();
     nutool_pincfg_init_spi1();
     nutool_pincfg_init_uart0();
+#if !defined(BOARD_USING_LCD_ILI9341)
     nutool_pincfg_init_uart1();
+#endif
     nutool_pincfg_init_uart4();
     nutool_pincfg_init_usb();
 

bsp/nuvoton/numaker-m2354/board/board_dev.c

@@ -13,6 +13,32 @@
 #include <rtdevice.h>
 #include <drv_gpio.h>
 
+
+
+#if defined(BOARD_USING_LCD_ILI9341) && defined(NU_PKG_USING_ILI9341_SPI)
+#include <lcd_ili9341.h>
+#if defined(PKG_USING_GUIENGINE)
+    #include <rtgui/driver.h>
+#endif
+int rt_hw_ili9341_port(void)
+{
+    if (rt_hw_lcd_ili9341_spi_init("spi1") != RT_EOK)
+        return -1;
+
+    rt_hw_lcd_ili9341_init();
+
+#if defined(PKG_USING_GUIENGINE)
+    rt_device_t lcd_ili9341;
+    lcd_ili9341 = rt_device_find("lcd");
+    if (lcd_ili9341)
+    {
+        rtgui_graphic_set_device(lcd_ili9341);
+    }
+#endif
+    return 0;
+}
+INIT_COMPONENT_EXPORT(rt_hw_ili9341_port);
+#endif /* BOARD_USING_LCD_ILI9341 */
 #if defined(BOARD_USING_ESP8266)
 #include <at_device_esp8266.h>
 

bsp/nuvoton/numaker-pfm-m487/.config

@@ -279,7 +279,6 @@ CONFIG_RT_USB_DEVICE_HID_MOUSE=y
 #
 # POSIX layer and C standard library
 #
-# CONFIG_RT_USING_MODULE is not set
 CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 
 #
@@ -295,7 +294,9 @@ CONFIG_RT_USING_POSIX_DEVIO=y
 # CONFIG_RT_USING_POSIX_MMAN is not set
 # CONFIG_RT_USING_POSIX_DELAY is not set
 # CONFIG_RT_USING_POSIX_CLOCK is not set
+# CONFIG_RT_USING_POSIX_TIMER is not set
 # CONFIG_RT_USING_PTHREADS is not set
+# CONFIG_RT_USING_MODULE is not set
 
 #
 # Interprocess Communication (IPC)
@@ -343,8 +344,7 @@ CONFIG_NETDEV_IPV6=0
 #
 CONFIG_RT_USING_LWIP=y
 # CONFIG_RT_USING_LWIP141 is not set
-CONFIG_RT_USING_LWIP202=y
-# CONFIG_RT_USING_LWIP203 is not set
+CONFIG_RT_USING_LWIP203=y
 # CONFIG_RT_USING_LWIP212 is not set
 # CONFIG_RT_USING_LWIP_IPV6 is not set
 CONFIG_RT_LWIP_MEM_ALIGNMENT=4
@@ -942,11 +942,11 @@ CONFIG_NU_CRC_USE_PDMA=y
 CONFIG_BSP_USING_WDT=y
 # CONFIG_BSP_USING_EBI is not set
 CONFIG_BSP_USING_USBD=y
-# CONFIG_BSP_USING_HSUSBD is not set
+CONFIG_BSP_USING_HSUSBD=y
 # CONFIG_BSP_USING_USBH is not set
 CONFIG_BSP_USING_HSUSBH=y
 CONFIG_NU_USBHOST_HUB_POLLING_INTERVAL=100
-# CONFIG_BSP_USING_HSOTG is not set
+CONFIG_BSP_USING_HSOTG=y
 
 #
 # On-board Peripheral Drivers
@@ -956,6 +956,7 @@ CONFIG_BOARD_USING_IP101GR=y
 CONFIG_BOARD_USING_NAU88L25=y
 CONFIG_BOARD_USING_STORAGE_SDCARD=y
 CONFIG_BOARD_USING_STORAGE_SPIFLASH=y
+CONFIG_BOARD_USING_USB_D_H=y
 # CONFIG_BOARD_USING_HSUSBD is not set
 # CONFIG_BOARD_USING_HSUSBD_USBH is not set
 # CONFIG_BOARD_USING_HSUSBH is not set

bsp/nuvoton/numaker-pfm-m487/applications/mnt.c

@@ -13,12 +13,12 @@
 #include <rtthread.h>
 
 #if defined(RT_USING_DFS)
-#include <dfs_fs.h>
-#include <dfs_file.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <sys/stat.h>
-#include <sys/statfs.h>
+    #include <dfs_fs.h>
+    #include <dfs_file.h>
+    #include <unistd.h>
+    #include <stdio.h>
+    #include <sys/stat.h>
+    #include <sys/statfs.h>
 #endif
 
 #if defined(PKG_USING_FAL)

bsp/nuvoton/numaker-pfm-m487/board/Kconfig

@@ -37,42 +37,49 @@ menu "Hardware Drivers Config"
             select BSP_USING_QSPI0
             default y
 
-        choice
-            prompt "Select FS/HS USB Ports"
-
-            config BOARD_USING_HSUSBD
-                select BSP_USING_HSUSBD
-                bool "Enable HSUSBD(over USB2.0)"
-                help
-                    Choose this option if you need HSUSBD function mode.
-
-            config BOARD_USING_HSUSBD_USBH
-                select BSP_USING_USBH
-                select BSP_USING_HSUSBD
-                bool "Enable HSUSBD(over USB2.0) and USBH(over USB1.1)"
-                help
-                    Choose this option if you need HSUSBD and USBH function mode at the same time.
-
-            config BOARD_USING_HSUSBH
-                select BSP_USING_HSUSBH
-                bool "Enable HSUSBH(over USB2.0)"
-                help
-                    Choose this option if you need HSUSBH function mode.
-
-            config BOARD_USING_HSUSBH_USBD
-                select BSP_USING_HSUSBH
-                select BSP_USING_USBD
-                bool "Enable HSUSBH(over USB2.0) and USBD(over USB1.1)"
-                help
-                    Choose this option if you need HSUSBH and USBD function mode at the same time.
-
-            config BOARD_USING_HSOTG
-                select BSP_USING_HSOTG
-                bool "Enable HSOTG(over USB2.0)"
-                help
-                    Choose this option if you need HSOTG function mode.
-
-        endchoice
+        config BOARD_USING_USB_D_H
+            select BSP_USING_HSOTG
+            bool "Enable USB Device or Host function"
+            help
+                Choose this option if you need USB function.
+
+        if BOARD_USING_USB_D_H
+            choice
+                prompt "Select FS/HS USB Ports"
+
+                config BOARD_USING_HSUSBD
+                    select BSP_USING_HSUSBD
+                    bool "Enable HSUSBD(over USB2.0)"
+                    help
+                        Choose this option if you need HSUSBD function mode.
+
+                config BOARD_USING_HSUSBD_USBH
+                    select BSP_USING_USBH
+                    select BSP_USING_HSUSBD
+                    bool "Enable HSUSBD(over USB2.0) and USBH(over USB1.1)"
+                    help
+                        Choose this option if you need HSUSBD and USBH function mode at the same time.
+
+                config BOARD_USING_HSUSBH
+                    select BSP_USING_HSUSBH
+                    bool "Enable HSUSBH(over USB2.0)"
+                    help
+                        Choose this option if you need HSUSBH function mode.
+
+                config BOARD_USING_HSUSBH_USBD
+                    select BSP_USING_HSUSBH
+                    select BSP_USING_USBD
+                    bool "Enable HSUSBH(over USB2.0) and USBD(over USB1.1)"
+                    help
+                        Choose this option if you need HSUSBH and USBD function mode at the same time.
+
+                config BOARD_USING_HSOTG
+                    select BSP_USING_HSOTG
+                    bool "Enable HSOTG(over USB2.0)"
+                    help
+                        Choose this option if you need HSOTG function mode.
+            endchoice
+        endif
 
     endmenu