[bsp] modify the uart_driver to fit the new rt-thread serial device driver framework. Modify the template.uvproj for auto generate MDK project.

bsp/tm4c129x/applications/application.c

@@ -20,8 +20,9 @@
 void rt_init_thread_entry(void *parameter)
 {
     /* Initialization RT-Thread Components */
-#ifdef RT_USING_COMPONENTS_INIT
     rt_components_init();
+#ifdef RT_USING_FINSH
+    finsh_set_device(RT_CONSOLE_DEVICE_NAME);
 #endif
 }
 

bsp/tm4c129x/applications/board.c

@@ -15,14 +15,14 @@
 
 #include <rthw.h>
 #include <rtthread.h>
-#include <components.h>
 
 #include "board.h"
 #include "drv_uart.h"
-#include "interrupt.h"
-#include "sysctl.h"
-#include "systick.h"
-#include "fpu.h"
+
+#include "driverlib/interrupt.h"
+#include "driverlib/sysctl.h"
+#include "driverlib/systick.h"
+#include "driverlib/fpu.h"
 #include "driverlib/rom_map.h"
 
 #define SYS_CLOCK_DEFAULT 120000000
@@ -56,16 +56,15 @@ void SysTick_Handler(void)
 extern void PendSV_Handler(void);
 extern void HardFault_Handler(void);
 
-
 /**
  * This function will initial LPC40xx board.
  */
 void rt_hw_board_init()
 {
     IntRegister(FAULT_HARD, HardFault_Handler);	
-		IntRegister(FAULT_PENDSV, PendSV_Handler);
-		IntRegister(FAULT_SYSTICK, SysTick_Handler);
-	
+    IntRegister(FAULT_PENDSV, PendSV_Handler);
+    IntRegister(FAULT_SYSTICK, SysTick_Handler);
+    
 	  //
     // Enable lazy stacking for interrupt handlers.  This allows floating-point
     // instructions to be used within interrupt handlers, but at the expense of
@@ -78,23 +77,24 @@ void rt_hw_board_init()
     // TODO: The SYSCTL_XTAL_ value must be changed to match the value of the
     // crystal on your board.
     //
-    SysClock = MAP_SysCtlClockFreqSet((SYSCTL_XTAL_25MHZ | SYSCTL_OSC_MAIN | SYSCTL_USE_PLL | SYSCTL_CFG_VCO_480),
-                                            SYS_CLOCK_DEFAULT);
+    SysClock = MAP_SysCtlClockFreqSet(
+                (SYSCTL_XTAL_25MHZ | SYSCTL_OSC_MAIN | SYSCTL_USE_PLL | SYSCTL_CFG_VCO_480),
+                SYS_CLOCK_DEFAULT);
 
-	MAP_SysTickDisable();
+    MAP_SysTickDisable();
     MAP_SysTickPeriodSet(SysClock/ RT_TICK_PER_SECOND - 1);
     MAP_SysTickIntEnable();
     MAP_SysTickEnable();	
 
-
     /* set pend exception priority */
-    //IntPrioritySet(FAULT_PENDSV, (1 << __NVIC_PRIO_BITS) - 1);
-    /*init uart device*/
-		
+    IntPrioritySet(FAULT_PENDSV, (1 << 5) - 1);
+    
+    /*init uart device*/		
     rt_hw_uart_init();
+		//redirect RTT stdio to CONSOLE device
     rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
     //
     // Enable interrupts to the processor.
     //
-	MAP_IntMasterEnable();
+	  MAP_IntMasterEnable();
 }

bsp/tm4c129x/drivers/drv_uart.c

@@ -20,41 +20,83 @@
 #include "board.h"
 //#include <components.h>
 
-#include "sysctl.h"
-#include "gpio.h"
-#include "uart.h"
-#include "hw_memmap.h"
-#include "pin_map.h"
-#include "interrupt.h"
-#include "rom.h"
-#include "rom_map.h"
+#include "inc/hw_memmap.h"
+#include "driverlib/sysctl.h"
+#include "driverlib/gpio.h"
+#include "driverlib/uart.h"
+#include "driverlib/pin_map.h"
+#include "driverlib/interrupt.h"
+#include "driverlib/rom_map.h"
 typedef struct hw_uart_device
 {
     uint32_t hw_base; // base address
 }hw_uart_t;
 
-#define GetHwUartPtr(serial) ((hw_uart_t*)(serial->parent.user_data))
+#define mUartGetHwPtr(serial) ((hw_uart_t*)(serial->parent.user_data))
 
 static rt_err_t hw_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
 {	
+	uint32_t config;
 	hw_uart_t* uart;
     RT_ASSERT(serial != RT_NULL);
-    uart = GetHwUartPtr(serial);
+    uart = mUartGetHwPtr(serial);
+
 	MAP_UARTDisable(uart->hw_base);
-    /* Initialize UART Configuration parameter structure to default state:
-     * Baudrate = 115200 bps
-     * 8 data bit
-     * 1 Stop bit
-     * None parity
-     */
-    // Initialize UART0 peripheral with given to corresponding parameter
-    MAP_UARTConfigSetExpClk(uart->hw_base, SysClock, cfg->baud_rate,
-													(UART_CONFIG_WLEN_8 | UART_CONFIG_STOP_ONE | UART_CONFIG_PAR_NONE));
-		MAP_UARTFIFOEnable(uart->hw_base);
-
-  //
+	// build UART Configuration parameter structure
+    switch(cfg->data_bits)
+	{
+	case DATA_BITS_9:
+		// enable 9bit address mode and set DATA_BIT_8
+		MAP_UART9BitEnable(uart->hw_base);
+	case DATA_BITS_8:
+		config |= UART_CONFIG_WLEN_8;
+		break;
+	case DATA_BITS_7:
+		config |= UART_CONFIG_WLEN_7;
+		break;
+	case DATA_BITS_6:
+		config |= UART_CONFIG_WLEN_6;
+		break;
+	case DATA_BITS_5:
+		config |= UART_CONFIG_WLEN_5;
+		break;
+	default:
+		RT_ASSERT(0);
+		break;
+	}
+	switch(cfg->parity)
+	{
+	case PARITY_ODD:
+		config |= UART_CONFIG_PAR_ODD;
+		break;
+	case PARITY_EVEN:
+		config |= UART_CONFIG_PAR_EVEN;
+		break;
+	case PARITY_NONE:
+		config |= UART_CONFIG_PAR_NONE;
+		break;
+	default:
+		RT_ASSERT(0);
+		break;
+	}
+	switch(cfg->stop_bits)
+	{
+	case STOP_BITS_1:
+		config |= UART_CONFIG_STOP_ONE;
+		break;
+	case STOP_BITS_2:
+		config |= UART_CONFIG_STOP_TWO;
+		break;
+	default:
+		RT_ASSERT(0);
+		break;
+	}
+	
+	// Initialize UART0 peripheral with given to corresponding parameter
+    MAP_UARTConfigSetExpClk(uart->hw_base, SysClock, cfg->baud_rate, config);
+	MAP_UARTFIFOEnable(uart->hw_base);
+
 	// Enable the UART.
-	//
 	MAP_UARTEnable(uart->hw_base);
     return RT_EOK;
 }
@@ -63,7 +105,7 @@ static rt_err_t hw_control(struct rt_serial_device *serial, int cmd, void *arg)
 {
 	hw_uart_t* uart;
     RT_ASSERT(serial != RT_NULL);
-    uart = GetHwUartPtr(serial);
+    uart = mUartGetHwPtr(serial);
 
     switch (cmd)
     {
@@ -84,7 +126,7 @@ static int hw_putc(struct rt_serial_device *serial, char c)
 {
 	hw_uart_t* uart;
     RT_ASSERT(serial != RT_NULL);
-    uart = GetHwUartPtr(serial);
+    uart = mUartGetHwPtr(serial);
 	
     MAP_UARTCharPut(uart->hw_base, *((uint8_t *)&c));
     return 1;
@@ -94,7 +136,7 @@ static int hw_getc(struct rt_serial_device *serial)
 {
 	hw_uart_t* uart;
     RT_ASSERT(serial != RT_NULL);
-    uart = GetHwUartPtr(serial);
+    uart = mUartGetHwPtr(serial);
 	
 	return MAP_UARTCharGetNonBlocking(uart->hw_base);
 }
@@ -110,7 +152,6 @@ static const struct rt_uart_ops hw_uart_ops =
 #if defined(RT_USING_UART0)
 /* UART0 device driver structure */
 struct rt_serial_device serial0;
-struct serial_ringbuffer uart0_int_rx_buf;
 hw_uart_t uart0 =
 {
     UART0_BASE,
@@ -118,21 +159,20 @@ hw_uart_t uart0 =
 
 void UART0_IRQHandler(void)
 {
-	  uint32_t intsrc;
+	uint32_t intsrc;
     hw_uart_t *uart = &uart0;
 
     /* enter interrupt */
     rt_interrupt_enter();
 
     /* Determine the interrupt source */
-    intsrc = UARTIntStatus(uart->hw_base, true);
+    intsrc = MAP_UARTIntStatus(uart->hw_base, true);
 
     // Receive Data Available or Character time-out
     if (intsrc & (UART_INT_RX | UART_INT_RT))
     {
-						UARTIntClear(UART0_BASE, intsrc);
-        rt_hw_serial_isr(&serial0);
-
+        MAP_UARTIntClear(uart->hw_base, intsrc);
+        rt_hw_serial_isr(&serial0, RT_SERIAL_EVENT_RX_IND);
     }
 		
     /* leave interrupt */
@@ -144,57 +184,38 @@ int rt_hw_uart_init(void)
 {
     hw_uart_t* uart;
     struct serial_configure config;
-	
-#ifdef RT_USING_UART0
-    uart = &uart0;
+
     config.baud_rate = BAUD_RATE_115200;
     config.bit_order = BIT_ORDER_LSB;
     config.data_bits = DATA_BITS_8;
     config.parity    = PARITY_NONE;
     config.stop_bits = STOP_BITS_1;
     config.invert    = NRZ_NORMAL;
-
+    config.bufsz     = RT_SERIAL_RB_BUFSZ;
+	
+#ifdef RT_USING_UART0
+    uart = &uart0;
     serial0.ops    = &hw_uart_ops;
-    serial0.int_rx = &uart0_int_rx_buf;
     serial0.config = config;
 
-    //
-    // Enable the peripherals used by this example.
-    // The UART itself needs to be enabled, as well as the GPIO port
-    // containing the pins that will be used.
-    //
-
     MAP_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOA);
-
-    //
-    // Configure the GPIO pin muxing for the UART function.
-    // This is only necessary if your part supports GPIO pin function muxing.
-    // Study the data sheet to see which functions are allocated per pin.
-    // TODO: change this to select the port/pin you are using
-    //
     MAP_GPIOPinConfigure(GPIO_PA0_U0RX);
     MAP_GPIOPinConfigure(GPIO_PA1_U0TX);
-
-    //
-    // Since GPIO A0 and A1 are used for the UART function, they must be
-    // configured for use as a peripheral function (instead of GPIO).
-    // TODO: change this to match the port/pin you are using
-    //
+	
     MAP_GPIOPinTypeUART(GPIO_PORTA_BASE, GPIO_PIN_0 | GPIO_PIN_1);
-
     MAP_SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0);
 
     /* preemption = 1, sub-priority = 1 */
-    //IntPrioritySet(INT_UART0, ((0x01 << 3) | 0x01));
+    IntPrioritySet(INT_UART0, ((0x01 << 5) | 0x01));
 
     /* Enable Interrupt for UART channel */
-	UARTIntRegister(uart->hw_base, UART0_IRQHandler);
-	MAP_IntEnable(INT_UART0);
-	MAP_UARTEnable(uart->hw_base);
+	  UARTIntRegister(uart->hw_base, UART0_IRQHandler);
+	  MAP_IntEnable(INT_UART0);
+	  MAP_UARTEnable(uart->hw_base);
 
     /* register UART0 device */
     rt_hw_serial_register(&serial0, "uart0",
-                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
+                          RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
                           uart);
 #endif
 	return 0;

bsp/tm4c129x/project.uvproj

@@ -1,851 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
-<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
-
-  <SchemaVersion>1.1</SchemaVersion>
-
-  <Header>### uVision Project, (C) Keil Software</Header>
-
-  <Targets>
-    <Target>
-      <TargetName>Target 1</TargetName>
-      <ToolsetNumber>0x4</ToolsetNumber>
-      <ToolsetName>ARM-ADS</ToolsetName>
-      <TargetOption>
-        <TargetCommonOption>
-          <Device>TM4C1294NCZAD</Device>
-          <Vendor>Texas Instruments</Vendor>
-          <Cpu>IROM(0x00000000,0x100000) IRAM(0x20000000,0x040000) CPUTYPE("Cortex-M4") FPU2 CLOCK(120000000) ELITTLE</Cpu>
-          <FlashUtilSpec></FlashUtilSpec>
-          <StartupFile></StartupFile>
-          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0TM4C129_1024 -FS00 -FL0100000 -FP0($$Device:TM4C1294NCZAD$Flash\TM4C129_1024.FLM))</FlashDriverDll>
-          <DeviceId>7089</DeviceId>
-          <RegisterFile>$$Device:TM4C1294NCZAD$Device\Include\TM4C129\TM4C129.h</RegisterFile>
-          <MemoryEnv></MemoryEnv>
-          <Cmp></Cmp>
-          <Asm></Asm>
-          <Linker></Linker>
-          <OHString></OHString>
-          <InfinionOptionDll></InfinionOptionDll>
-          <SLE66CMisc>-DTM4C1294NCZAD</SLE66CMisc>
-          <SLE66AMisc></SLE66AMisc>
-          <SLE66LinkerMisc></SLE66LinkerMisc>
-          <SFDFile>$$Device:TM4C1294NCZAD$SVD\TM4C129\TM4C1294NCZAD.svd</SFDFile>
-          <bCustSvd>0</bCustSvd>
-          <UseEnv>0</UseEnv>
-          <BinPath></BinPath>
-          <IncludePath></IncludePath>
-          <LibPath></LibPath>
-          <RegisterFilePath></RegisterFilePath>
-          <DBRegisterFilePath></DBRegisterFilePath>
-          <TargetStatus>
-            <Error>0</Error>
-            <ExitCodeStop>0</ExitCodeStop>
-            <ButtonStop>0</ButtonStop>
-            <NotGenerated>0</NotGenerated>
-            <InvalidFlash>1</InvalidFlash>
-          </TargetStatus>
-          <OutputDirectory>.\keil_bulid\</OutputDirectory>
-          <OutputName>project</OutputName>
-          <CreateExecutable>1</CreateExecutable>
-          <CreateLib>0</CreateLib>
-          <CreateHexFile>0</CreateHexFile>
-          <DebugInformation>1</DebugInformation>
-          <BrowseInformation>1</BrowseInformation>
-          <ListingPath>.\keil_bulid\</ListingPath>
-          <HexFormatSelection>1</HexFormatSelection>
-          <Merge32K>0</Merge32K>
-          <CreateBatchFile>1</CreateBatchFile>
-          <BeforeCompile>
-            <RunUserProg1>0</RunUserProg1>
-            <RunUserProg2>0</RunUserProg2>
-            <UserProg1Name></UserProg1Name>
-            <UserProg2Name></UserProg2Name>
-            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
-            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
-            <nStopU1X>0</nStopU1X>
-            <nStopU2X>0</nStopU2X>
-          </BeforeCompile>
-          <BeforeMake>
-            <RunUserProg1>0</RunUserProg1>
-            <RunUserProg2>0</RunUserProg2>
-            <UserProg1Name></UserProg1Name>
-            <UserProg2Name></UserProg2Name>
-            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
-            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
-            <nStopB1X>0</nStopB1X>
-            <nStopB2X>0</nStopB2X>
-          </BeforeMake>
-          <AfterMake>
-            <RunUserProg1>0</RunUserProg1>
-            <RunUserProg2>0</RunUserProg2>
-            <UserProg1Name></UserProg1Name>
-            <UserProg2Name></UserProg2Name>
-            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
-            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
-          </AfterMake>
-          <SelectedForBatchBuild>0</SelectedForBatchBuild>
-          <SVCSIdString></SVCSIdString>
-        </TargetCommonOption>
-        <CommonProperty>
-          <UseCPPCompiler>0</UseCPPCompiler>
-          <RVCTCodeConst>0</RVCTCodeConst>
-          <RVCTZI>0</RVCTZI>
-          <RVCTOtherData>0</RVCTOtherData>
-          <ModuleSelection>0</ModuleSelection>
-          <IncludeInBuild>1</IncludeInBuild>
-          <AlwaysBuild>0</AlwaysBuild>
-          <GenerateAssemblyFile>0</GenerateAssemblyFile>
-          <AssembleAssemblyFile>0</AssembleAssemblyFile>
-          <PublicsOnly>0</PublicsOnly>
-          <StopOnExitCode>3</StopOnExitCode>
-          <CustomArgument></CustomArgument>
-          <IncludeLibraryModules></IncludeLibraryModules>
-          <ComprImg>1</ComprImg>
-        </CommonProperty>
-        <DllOption>
-          <SimDllName>SARMCM3.DLL</SimDllName>
-          <SimDllArguments>-MPU</SimDllArguments>
-          <SimDlgDll>DCM.DLL</SimDlgDll>
-          <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
-          <TargetDllName>SARMCM3.DLL</TargetDllName>
-          <TargetDllArguments>-MPU</TargetDllArguments>
-          <TargetDlgDll>TCM.DLL</TargetDlgDll>
-          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
-        </DllOption>
-        <DebugOption>
-          <OPTHX>
-            <HexSelection>1</HexSelection>
-            <HexRangeLowAddress>0</HexRangeLowAddress>
-            <HexRangeHighAddress>0</HexRangeHighAddress>
-            <HexOffset>0</HexOffset>
-            <Oh166RecLen>16</Oh166RecLen>
-          </OPTHX>
-          <Simulator>
-            <UseSimulator>0</UseSimulator>
-            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
-            <RunToMain>1</RunToMain>
-            <RestoreBreakpoints>1</RestoreBreakpoints>
-            <RestoreWatchpoints>1</RestoreWatchpoints>
-            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
-            <RestoreFunctions>1</RestoreFunctions>
-            <RestoreToolbox>1</RestoreToolbox>
-            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
-            <RestoreSysVw>1</RestoreSysVw>
-          </Simulator>
-          <Target>
-            <UseTarget>1</UseTarget>
-            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
-            <RunToMain>1</RunToMain>
-            <RestoreBreakpoints>1</RestoreBreakpoints>
-            <RestoreWatchpoints>1</RestoreWatchpoints>
-            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
-            <RestoreFunctions>0</RestoreFunctions>
-            <RestoreToolbox>1</RestoreToolbox>
-            <RestoreTracepoints>1</RestoreTracepoints>
-            <RestoreSysVw>1</RestoreSysVw>
-            <UsePdscDebugDescription>1</UsePdscDebugDescription>
-          </Target>
-          <RunDebugAfterBuild>0</RunDebugAfterBuild>
-          <TargetSelection>3</TargetSelection>
-          <SimDlls>
-            <CpuDll></CpuDll>
-            <CpuDllArguments></CpuDllArguments>
-            <PeripheralDll></PeripheralDll>
-            <PeripheralDllArguments></PeripheralDllArguments>
-            <InitializationFile></InitializationFile>
-          </SimDlls>
-          <TargetDlls>
-            <CpuDll></CpuDll>
-            <CpuDllArguments></CpuDllArguments>
-            <PeripheralDll></PeripheralDll>
-            <PeripheralDllArguments></PeripheralDllArguments>
-            <InitializationFile></InitializationFile>
-            <Driver>BIN\lmidk-agdi.dll</Driver>
-          </TargetDlls>
-        </DebugOption>
-        <Utilities>
-          <Flash1>
-            <UseTargetDll>1</UseTargetDll>
-            <UseExternalTool>0</UseExternalTool>
-            <RunIndependent>0</RunIndependent>
-            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
-            <Capability>1</Capability>
-            <DriverSelection>4096</DriverSelection>
-          </Flash1>
-          <bUseTDR>1</bUseTDR>
-          <Flash2>BIN\UL2CM3.DLL</Flash2>
-          <Flash3>"" ()</Flash3>
-          <Flash4></Flash4>
-          <pFcarmOut></pFcarmOut>
-          <pFcarmGrp></pFcarmGrp>
-          <pFcArmRoot></pFcArmRoot>
-          <FcArmLst>0</FcArmLst>
-        </Utilities>
-        <TargetArmAds>
-          <ArmAdsMisc>
-            <GenerateListings>0</GenerateListings>
-            <asHll>1</asHll>
-            <asAsm>1</asAsm>
-            <asMacX>1</asMacX>
-            <asSyms>1</asSyms>
-            <asFals>1</asFals>
-            <asDbgD>1</asDbgD>
-            <asForm>1</asForm>
-            <ldLst>0</ldLst>
-            <ldmm>1</ldmm>
-            <ldXref>1</ldXref>
-            <BigEnd>0</BigEnd>
-            <AdsALst>1</AdsALst>
-            <AdsACrf>1</AdsACrf>
-            <AdsANop>0</AdsANop>
-            <AdsANot>0</AdsANot>
-            <AdsLLst>1</AdsLLst>
-            <AdsLmap>1</AdsLmap>
-            <AdsLcgr>1</AdsLcgr>
-            <AdsLsym>1</AdsLsym>
-            <AdsLszi>1</AdsLszi>
-            <AdsLtoi>1</AdsLtoi>
-            <AdsLsun>1</AdsLsun>
-            <AdsLven>1</AdsLven>
-            <AdsLsxf>1</AdsLsxf>
-            <RvctClst>0</RvctClst>
-            <GenPPlst>0</GenPPlst>
-            <AdsCpuType>"Cortex-M4"</AdsCpuType>
-            <RvctDeviceName></RvctDeviceName>
-            <mOS>0</mOS>
-            <uocRom>0</uocRom>
-            <uocRam>0</uocRam>
-            <hadIROM>1</hadIROM>
-            <hadIRAM>1</hadIRAM>
-            <hadXRAM>0</hadXRAM>
-            <uocXRam>0</uocXRam>
-            <RvdsVP>2</RvdsVP>
-            <hadIRAM2>0</hadIRAM2>
-            <hadIROM2>0</hadIROM2>
-            <StupSel>8</StupSel>
-            <useUlib>0</useUlib>
-            <EndSel>0</EndSel>
-            <uLtcg>0</uLtcg>
-            <RoSelD>3</RoSelD>
-            <RwSelD>3</RwSelD>
-            <CodeSel>0</CodeSel>
-            <OptFeed>0</OptFeed>
-            <NoZi1>0</NoZi1>
-            <NoZi2>0</NoZi2>
-            <NoZi3>0</NoZi3>
-            <NoZi4>0</NoZi4>
-            <NoZi5>0</NoZi5>
-            <Ro1Chk>0</Ro1Chk>
-            <Ro2Chk>0</Ro2Chk>
-            <Ro3Chk>0</Ro3Chk>
-            <Ir1Chk>1</Ir1Chk>
-            <Ir2Chk>0</Ir2Chk>
-            <Ra1Chk>0</Ra1Chk>
-            <Ra2Chk>0</Ra2Chk>
-            <Ra3Chk>0</Ra3Chk>
-            <Im1Chk>1</Im1Chk>
-            <Im2Chk>0</Im2Chk>
-            <OnChipMemories>
-              <Ocm1>
-                <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </Ocm1>
-              <Ocm2>
-                <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </Ocm2>
-              <Ocm3>
-                <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </Ocm3>
-              <Ocm4>
-                <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </Ocm4>
-              <Ocm5>
-                <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </Ocm5>
-              <Ocm6>
-                <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </Ocm6>
-              <IRAM>
-                <Type>0</Type>
-                <StartAddress>0x20000000</StartAddress>
-                <Size>0x40000</Size>
-              </IRAM>
-              <IROM>
-                <Type>1</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x100000</Size>
-              </IROM>
-              <XRAM>
-                <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </XRAM>
-              <OCR_RVCT1>
-                <Type>1</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </OCR_RVCT1>
-              <OCR_RVCT2>
-                <Type>1</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </OCR_RVCT2>
-              <OCR_RVCT3>
-                <Type>1</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </OCR_RVCT3>
-              <OCR_RVCT4>
-                <Type>1</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x100000</Size>
-              </OCR_RVCT4>
-              <OCR_RVCT5>
-                <Type>1</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </OCR_RVCT5>
-              <OCR_RVCT6>
-                <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </OCR_RVCT6>
-              <OCR_RVCT7>
-                <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </OCR_RVCT7>
-              <OCR_RVCT8>
-                <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </OCR_RVCT8>
-              <OCR_RVCT9>
-                <Type>0</Type>
-                <StartAddress>0x20000000</StartAddress>
-                <Size>0x40000</Size>
-              </OCR_RVCT9>
-              <OCR_RVCT10>
-                <Type>0</Type>
-                <StartAddress>0x0</StartAddress>
-                <Size>0x0</Size>
-              </OCR_RVCT10>
-            </OnChipMemories>
-            <RvctStartVector></RvctStartVector>
-          </ArmAdsMisc>
-          <Cads>
-            <interw>1</interw>
-            <Optim>1</Optim>
-            <oTime>0</oTime>
-            <SplitLS>0</SplitLS>
-            <OneElfS>0</OneElfS>
-            <Strict>0</Strict>
-            <EnumInt>0</EnumInt>
-            <PlainCh>0</PlainCh>
-            <Ropi>0</Ropi>
-            <Rwpi>0</Rwpi>
-            <wLevel>2</wLevel>
-            <uThumb>0</uThumb>
-            <uSurpInc>0</uSurpInc>
-            <uC99>0</uC99>
-            <useXO>0</useXO>
-            <VariousControls>
-              <MiscControls></MiscControls>
-              <Define>PART_TM4C129XNCZAD</Define>
-              <Undefine></Undefine>
-              <IncludePath>..\..\src;..\..\include;..\..\libcpu\arm\cortex-m4;..\..\components\drivers\include;..\..\components\drivers\include\drivers;..\..\components\finsh;..\tm4c129x;.\libraries\driverlib;.\libraries\inc;.\libraries\startup;.\libraries;.\drivers;.\applications;..\..\components\init</IncludePath>
-            </VariousControls>
-          </Cads>
-          <Aads>
-            <interw>1</interw>
-            <Ropi>0</Ropi>
-            <Rwpi>0</Rwpi>
-            <thumb>0</thumb>
-            <SplitLS>0</SplitLS>
-            <SwStkChk>0</SwStkChk>
-            <NoWarn>0</NoWarn>
-            <uSurpInc>0</uSurpInc>
-            <useXO>0</useXO>
-            <VariousControls>
-              <MiscControls></MiscControls>
-              <Define>PART_TM4C129XNCZAD</Define>
-              <Undefine></Undefine>
-              <IncludePath></IncludePath>
-            </VariousControls>
-          </Aads>
-          <LDads>
-            <umfTarg>0</umfTarg>
-            <Ropi>0</Ropi>
-            <Rwpi>1</Rwpi>
-            <noStLib>0</noStLib>
-            <RepFail>1</RepFail>
-            <useFile>0</useFile>
-            <TextAddressRange>0x00000000</TextAddressRange>
-            <DataAddressRange>0x00000000</DataAddressRange>
-            <pXoBase></pXoBase>
-            <ScatterFile>project.sct</ScatterFile>
-            <IncludeLibs></IncludeLibs>
-            <IncludeLibsPath></IncludeLibsPath>
-            <Misc></Misc>
-            <LinkerInputFile></LinkerInputFile>
-            <DisabledWarnings></DisabledWarnings>
-          </LDads>
-        </TargetArmAds>
-      </TargetOption>
-      <Groups>
-        <Group>
-          <GroupName>applcaitions</GroupName>
-          <Files>
-            <File>
-              <FileName>application.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\applications\application.c</FilePath>
-            </File>
-            <File>
-              <FileName>board.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\applications\board.c</FilePath>
-            </File>
-            <File>
-              <FileName>startup.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\applications\startup.c</FilePath>
-            </File>
-          </Files>
-        </Group>
-        <Group>
-          <GroupName>drivers</GroupName>
-          <Files>
-            <File>
-              <FileName>drv_uart.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\drivers\drv_uart.c</FilePath>
-            </File>
-          </Files>
-        </Group>
-        <Group>
-          <GroupName>libraries</GroupName>
-          <Files>
-            <File>
-              <FileName>adc.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\adc.c</FilePath>
-            </File>
-            <File>
-              <FileName>aes.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\aes.c</FilePath>
-            </File>
-            <File>
-              <FileName>can.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\can.c</FilePath>
-            </File>
-            <File>
-              <FileName>comp.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\comp.c</FilePath>
-            </File>
-            <File>
-              <FileName>cpu.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\cpu.c</FilePath>
-            </File>
-            <File>
-              <FileName>crc.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\crc.c</FilePath>
-            </File>
-            <File>
-              <FileName>des.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\des.c</FilePath>
-            </File>
-            <File>
-              <FileName>eeprom.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\eeprom.c</FilePath>
-            </File>
-            <File>
-              <FileName>emac.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\emac.c</FilePath>
-            </File>
-            <File>
-              <FileName>epi.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\epi.c</FilePath>
-            </File>
-            <File>
-              <FileName>flash.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\flash.c</FilePath>
-            </File>
-            <File>
-              <FileName>fpu.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\fpu.c</FilePath>
-            </File>
-            <File>
-              <FileName>gpio.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\gpio.c</FilePath>
-            </File>
-            <File>
-              <FileName>hibernate.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\hibernate.c</FilePath>
-            </File>
-            <File>
-              <FileName>i2c.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\i2c.c</FilePath>
-            </File>
-            <File>
-              <FileName>interrupt.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\interrupt.c</FilePath>
-            </File>
-            <File>
-              <FileName>lcd.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\lcd.c</FilePath>
-            </File>
-            <File>
-              <FileName>mpu.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\mpu.c</FilePath>
-            </File>
-            <File>
-              <FileName>pwm.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\pwm.c</FilePath>
-            </File>
-            <File>
-              <FileName>qei.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\qei.c</FilePath>
-            </File>
-            <File>
-              <FileName>shamd5.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\shamd5.c</FilePath>
-            </File>
-            <File>
-              <FileName>ssi.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\ssi.c</FilePath>
-            </File>
-            <File>
-              <FileName>sw_crc.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\sw_crc.c</FilePath>
-            </File>
-            <File>
-              <FileName>sysctl.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\sysctl.c</FilePath>
-            </File>
-            <File>
-              <FileName>sysexc.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\sysexc.c</FilePath>
-            </File>
-            <File>
-              <FileName>systick.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\systick.c</FilePath>
-            </File>
-            <File>
-              <FileName>uart.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\uart.c</FilePath>
-            </File>
-            <File>
-              <FileName>udma.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\udma.c</FilePath>
-            </File>
-            <File>
-              <FileName>usb.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\usb.c</FilePath>
-            </File>
-            <File>
-              <FileName>watchdog.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\watchdog.c</FilePath>
-            </File>
-            <File>
-              <FileName>startup_rvmdk.S</FileName>
-              <FileType>2</FileType>
-              <FilePath>.\libraries\startup\startup_rvmdk.S</FilePath>
-            </File>
-            <File>
-              <FileName>tiva_timer.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>.\libraries\driverlib\tiva_timer.c</FilePath>
-            </File>
-          </Files>
-        </Group>
-        <Group>
-          <GroupName>rt_core</GroupName>
-          <Files>
-            <File>
-              <FileName>clock.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\src\clock.c</FilePath>
-            </File>
-            <File>
-              <FileName>device.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\src\device.c</FilePath>
-            </File>
-            <File>
-              <FileName>idle.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\src\idle.c</FilePath>
-            </File>
-            <File>
-              <FileName>ipc.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\src\ipc.c</FilePath>
-            </File>
-            <File>
-              <FileName>irq.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\src\irq.c</FilePath>
-            </File>
-            <File>
-              <FileName>kservice.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\src\kservice.c</FilePath>
-            </File>
-            <File>
-              <FileName>mem.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\src\mem.c</FilePath>
-            </File>
-            <File>
-              <FileName>memheap.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\src\memheap.c</FilePath>
-            </File>
-            <File>
-              <FileName>mempool.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\src\mempool.c</FilePath>
-            </File>
-            <File>
-              <FileName>module.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\src\module.c</FilePath>
-            </File>
-            <File>
-              <FileName>object.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\src\object.c</FilePath>
-            </File>
-            <File>
-              <FileName>scheduler.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\src\scheduler.c</FilePath>
-            </File>
-            <File>
-              <FileName>slab.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\src\slab.c</FilePath>
-            </File>
-            <File>
-              <FileName>thread.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\src\thread.c</FilePath>
-            </File>
-            <File>
-              <FileName>timer.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\src\timer.c</FilePath>
-            </File>
-          </Files>
-        </Group>
-        <Group>
-          <GroupName>finsh</GroupName>
-          <Files>
-            <File>
-              <FileName>cmd.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\finsh\cmd.c</FilePath>
-            </File>
-            <File>
-              <FileName>finsh_compiler.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\finsh\finsh_compiler.c</FilePath>
-            </File>
-            <File>
-              <FileName>finsh_error.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\finsh\finsh_error.c</FilePath>
-            </File>
-            <File>
-              <FileName>finsh_heap.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\finsh\finsh_heap.c</FilePath>
-            </File>
-            <File>
-              <FileName>finsh_init.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\finsh\finsh_init.c</FilePath>
-            </File>
-            <File>
-              <FileName>finsh_node.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\finsh\finsh_node.c</FilePath>
-            </File>
-            <File>
-              <FileName>finsh_ops.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\finsh\finsh_ops.c</FilePath>
-            </File>
-            <File>
-              <FileName>finsh_parser.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\finsh\finsh_parser.c</FilePath>
-            </File>
-            <File>
-              <FileName>finsh_token.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\finsh\finsh_token.c</FilePath>
-            </File>
-            <File>
-              <FileName>finsh_var.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\finsh\finsh_var.c</FilePath>
-            </File>
-            <File>
-              <FileName>finsh_vm.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\finsh\finsh_vm.c</FilePath>
-            </File>
-            <File>
-              <FileName>msh.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\finsh\msh.c</FilePath>
-            </File>
-            <File>
-              <FileName>msh_cmd.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\finsh\msh_cmd.c</FilePath>
-            </File>
-            <File>
-              <FileName>shell.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\finsh\shell.c</FilePath>
-            </File>
-            <File>
-              <FileName>symbol.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\finsh\symbol.c</FilePath>
-            </File>
-          </Files>
-        </Group>
-        <Group>
-          <GroupName>rt_hw</GroupName>
-          <Files>
-            <File>
-              <FileName>serial.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\drivers\serial\serial.c</FilePath>
-            </File>
-            <File>
-              <FileName>completion.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\drivers\src\completion.c</FilePath>
-            </File>
-            <File>
-              <FileName>dataqueue.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\drivers\src\dataqueue.c</FilePath>
-            </File>
-            <File>
-              <FileName>pipe.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\drivers\src\pipe.c</FilePath>
-            </File>
-            <File>
-              <FileName>portal.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\drivers\src\portal.c</FilePath>
-            </File>
-            <File>
-              <FileName>ringbuffer.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\drivers\src\ringbuffer.c</FilePath>
-            </File>
-            <File>
-              <FileName>workqueue.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\drivers\src\workqueue.c</FilePath>
-            </File>
-          </Files>
-        </Group>
-        <Group>
-          <GroupName>rt_components</GroupName>
-          <Files>
-            <File>
-              <FileName>components.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\components\init\components.c</FilePath>
-            </File>
-            <File>
-              <FileName>rtconfig.h</FileName>
-              <FileType>5</FileType>
-              <FilePath>.\rtconfig.h</FilePath>
-            </File>
-          </Files>
-        </Group>
-        <Group>
-          <GroupName>cpusupport</GroupName>
-          <Files>
-            <File>
-              <FileName>cpuport.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\libcpu\arm\cortex-m4\cpuport.c</FilePath>
-            </File>
-            <File>
-              <FileName>context_rvds.S</FileName>
-              <FileType>2</FileType>
-              <FilePath>..\..\libcpu\arm\cortex-m4\context_rvds.S</FilePath>
-            </File>
-            <File>
-              <FileName>backtrace.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\libcpu\arm\common\backtrace.c</FilePath>
-            </File>
-            <File>
-              <FileName>div0.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\libcpu\arm\common\div0.c</FilePath>
-            </File>
-            <File>
-              <FileName>showmem.c</FileName>
-              <FileType>1</FileType>
-              <FilePath>..\..\libcpu\arm\common\showmem.c</FilePath>
-            </File>
-          </Files>
-        </Group>
-      </Groups>
-    </Target>
-  </Targets>
-
-</Project>

bsp/tm4c129x/template.uvproj

@@ -7,35 +7,38 @@
 
   <Targets>
     <Target>
-      <TargetName>rt-thread_lm4f232</TargetName>
+      <TargetName>RT-Thread TM4C129X</TargetName>
       <ToolsetNumber>0x4</ToolsetNumber>
       <ToolsetName>ARM-ADS</ToolsetName>
       <TargetOption>
         <TargetCommonOption>
-          <Device>LM4F232H5QD</Device>
+          <Device>TM4C129XNCZAD</Device>
           <Vendor>Texas Instruments</Vendor>
-          <Cpu>IRAM(0x20000000-0x20007FFF) IROM(0-0x3FFFF) CLOCK(16000000) CPUTYPE("Cortex-M4") FPU2</Cpu>
+          <PackID>Keil.TM4C_DFP.1.0.0</PackID>
+          <PackURL>http://www.keil.com/pack/</PackURL>
+          <Cpu>IROM(0x00000000,0x100000) IRAM(0x20000000,0x040000) CPUTYPE("Cortex-M4") FPU2 CLOCK(120000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
-          <StartupFile>"STARTUP\Luminary\Startup.s" ("Luminary Startup Code")</StartupFile>
-          <FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0LM4F_256 -FS00 -FL040000)</FlashDriverDll>
-          <DeviceId>5931</DeviceId>
-          <RegisterFile>LM4Fxxxx.H</RegisterFile>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0TM4C129_1024 -FS00 -FL0100000 -FP0($$Device:TM4C129XNCZAD$Flash\TM4C129_1024.FLM))</FlashDriverDll>
+          <DeviceId>7096</DeviceId>
+          <RegisterFile>$$Device:TM4C129XNCZAD$Device\Include\TM4C129\TM4C129.h</RegisterFile>
           <MemoryEnv></MemoryEnv>
           <Cmp></Cmp>
           <Asm></Asm>
           <Linker></Linker>
           <OHString></OHString>
           <InfinionOptionDll></InfinionOptionDll>
-          <SLE66CMisc></SLE66CMisc>
+          <SLE66CMisc>-DTM4C129XNCZAD</SLE66CMisc>
           <SLE66AMisc></SLE66AMisc>
           <SLE66LinkerMisc></SLE66LinkerMisc>
-          <SFDFile>SFD\Luminary\LM4F232H5QD.SFR</SFDFile>
+          <SFDFile>$$Device:TM4C129XNCZAD$SVD\TM4C129\TM4C129XNCZAD.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
           <UseEnv>0</UseEnv>
           <BinPath></BinPath>
           <IncludePath></IncludePath>
           <LibPath></LibPath>
-          <RegisterFilePath>Luminary\</RegisterFilePath>
-          <DBRegisterFilePath>Luminary\</DBRegisterFilePath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
           <TargetStatus>
             <Error>0</Error>
             <ExitCodeStop>0</ExitCodeStop>
@@ -44,13 +47,13 @@
             <InvalidFlash>1</InvalidFlash>
           </TargetStatus>
           <OutputDirectory>.\build\</OutputDirectory>
-          <OutputName>project</OutputName>
+          <OutputName>rtthread-tm4c</OutputName>
           <CreateExecutable>1</CreateExecutable>
           <CreateLib>0</CreateLib>
           <CreateHexFile>0</CreateHexFile>
           <DebugInformation>1</DebugInformation>
-          <BrowseInformation>1</BrowseInformation>
-          <ListingPath>.\build\</ListingPath>
+          <BrowseInformation>0</BrowseInformation>
+          <ListingPath>.\</ListingPath>
           <HexFormatSelection>1</HexFormatSelection>
           <Merge32K>0</Merge32K>
           <CreateBatchFile>0</CreateBatchFile>
@@ -61,6 +64,8 @@
             <UserProg2Name></UserProg2Name>
             <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
             <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
           </BeforeCompile>
           <BeforeMake>
             <RunUserProg1>0</RunUserProg1>
@@ -69,6 +74,8 @@
             <UserProg2Name></UserProg2Name>
             <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
             <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
           </BeforeMake>
           <AfterMake>
             <RunUserProg1>0</RunUserProg1>
@@ -95,6 +102,7 @@
           <StopOnExitCode>3</StopOnExitCode>
           <CustomArgument></CustomArgument>
           <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
         </CommonProperty>
         <DllOption>
           <SimDllName>SARMCM3.DLL</SimDllName>
@@ -124,6 +132,7 @@
             <RestoreFunctions>1</RestoreFunctions>
             <RestoreToolbox>1</RestoreToolbox>
             <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
           </Simulator>
           <Target>
             <UseTarget>1</UseTarget>
@@ -134,9 +143,12 @@
             <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
             <RestoreFunctions>0</RestoreFunctions>
             <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>1</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>
+            <UsePdscDebugDescription>1</UsePdscDebugDescription>
           </Target>
           <RunDebugAfterBuild>0</RunDebugAfterBuild>
-          <TargetSelection>4</TargetSelection>
+          <TargetSelection>3</TargetSelection>
           <SimDlls>
             <CpuDll></CpuDll>
             <CpuDllArguments></CpuDllArguments>
@@ -158,13 +170,18 @@
             <UseTargetDll>1</UseTargetDll>
             <UseExternalTool>0</UseExternalTool>
             <RunIndependent>0</RunIndependent>
-            <UpdateFlashBeforeDebugging>0</UpdateFlashBeforeDebugging>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
             <Capability>1</Capability>
-            <DriverSelection>4097</DriverSelection>
+            <DriverSelection>4096</DriverSelection>
           </Flash1>
-          <Flash2>BIN\lmidk-agdi.dll</Flash2>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>BIN\UL2CM3.DLL</Flash2>
           <Flash3>"" ()</Flash3>
           <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
+          <FcArmLst>0</FcArmLst>
         </Utilities>
         <TargetArmAds>
           <ArmAdsMisc>
@@ -208,7 +225,7 @@
             <hadIRAM2>0</hadIRAM2>
             <hadIROM2>0</hadIROM2>
             <StupSel>8</StupSel>
-            <useUlib>1</useUlib>
+            <useUlib>0</useUlib>
             <EndSel>0</EndSel>
             <uLtcg>0</uLtcg>
             <RoSelD>3</RoSelD>
@@ -264,12 +281,12 @@
               <IRAM>
                 <Type>0</Type>
                 <StartAddress>0x20000000</StartAddress>
-                <Size>0x8000</Size>
+                <Size>0x40000</Size>
               </IRAM>
               <IROM>
                 <Type>1</Type>
                 <StartAddress>0x0</StartAddress>
-                <Size>0x40000</Size>
+                <Size>0x100000</Size>
               </IROM>
               <XRAM>
                 <Type>0</Type>
@@ -294,7 +311,7 @@
               <OCR_RVCT4>
                 <Type>1</Type>
                 <StartAddress>0x0</StartAddress>
-                <Size>0x40000</Size>
+                <Size>0x100000</Size>
               </OCR_RVCT4>
               <OCR_RVCT5>
                 <Type>1</Type>
@@ -319,7 +336,7 @@
               <OCR_RVCT9>
                 <Type>0</Type>
                 <StartAddress>0x20000000</StartAddress>
-                <Size>0x8000</Size>
+                <Size>0x40000</Size>
               </OCR_RVCT9>
               <OCR_RVCT10>
                 <Type>0</Type>
@@ -334,14 +351,17 @@
             <Optim>1</Optim>
             <oTime>0</oTime>
             <SplitLS>0</SplitLS>
-            <OneElfS>1</OneElfS>
+            <OneElfS>0</OneElfS>
             <Strict>0</Strict>
             <EnumInt>0</EnumInt>
             <PlainCh>0</PlainCh>
             <Ropi>0</Ropi>
             <Rwpi>0</Rwpi>
-            <wLevel>0</wLevel>
+            <wLevel>2</wLevel>
             <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>0</uC99>
+            <useXO>0</useXO>
             <VariousControls>
               <MiscControls></MiscControls>
               <Define></Define>
@@ -357,6 +377,8 @@
             <SplitLS>0</SplitLS>
             <SwStkChk>0</SwStkChk>
             <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
             <VariousControls>
               <MiscControls></MiscControls>
               <Define></Define>
@@ -372,8 +394,9 @@
             <RepFail>1</RepFail>
             <useFile>0</useFile>
             <TextAddressRange>0x00000000</TextAddressRange>
-            <DataAddressRange>0x20000000</DataAddressRange>
-            <ScatterFile></ScatterFile>
+            <DataAddressRange>0x00000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile>tm4c_rom.sct</ScatterFile>
             <IncludeLibs></IncludeLibs>
             <IncludeLibsPath></IncludeLibsPath>
             <Misc></Misc>