update(cherryusb): add config for hpm6750 usbdev and usbhost

bsp/hpmicro/hpm6750evk2/.config

@@ -128,7 +128,6 @@ CONFIG_RT_USING_DFS_DEVFS=y
 # CONFIG_RT_USING_DFS_RAMFS is not set
 # CONFIG_RT_USING_DFS_TMPFS is not set
 # CONFIG_RT_USING_DFS_MQUEUE is not set
-# CONFIG_RT_USING_DFS_NFS is not set
 # end of DFS: device virtual file system
 
 # CONFIG_RT_USING_FAL is not set
@@ -179,41 +178,7 @@ CONFIG_RT_USING_RTC=y
 CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_KTIME is not set
 # CONFIG_RT_USING_HWTIMER is not set
-CONFIG_RT_USING_CHERRYUSB=y
-# CONFIG_RT_CHERRYUSB_DEVICE is not set
-CONFIG_RT_CHERRYUSB_HOST=y
-# CONFIG_RT_CHERRYUSB_HOST_CUSTOM is not set
-# CONFIG_RT_CHERRYUSB_HOST_EHCI_BL is not set
-CONFIG_RT_CHERRYUSB_HOST_EHCI_HPM=y
-# CONFIG_RT_CHERRYUSB_HOST_EHCI_AIC is not set
-# CONFIG_RT_CHERRYUSB_HOST_EHCI_NUVOTON_NUC980 is not set
-# CONFIG_RT_CHERRYUSB_HOST_EHCI_NUVOTON_MA35D0 is not set
-# CONFIG_RT_CHERRYUSB_HOST_EHCI_CUSTOM is not set
-# CONFIG_RT_CHERRYUSB_HOST_DWC2_ST is not set
-# CONFIG_RT_CHERRYUSB_HOST_DWC2_ESP is not set
-# CONFIG_RT_CHERRYUSB_HOST_DWC2_CUSTOM is not set
-# CONFIG_RT_CHERRYUSB_HOST_MUSB_ES is not set
-# CONFIG_RT_CHERRYUSB_HOST_MUSB_SUNXI is not set
-# CONFIG_RT_CHERRYUSB_HOST_MUSB_BK is not set
-# CONFIG_RT_CHERRYUSB_HOST_MUSB_CUSTOM is not set
-# CONFIG_RT_CHERRYUSB_HOST_PUSB2 is not set
-# CONFIG_RT_CHERRYUSB_HOST_XHCI is not set
-CONFIG_RT_CHERRYUSB_HOST_CDC_ACM=y
-CONFIG_RT_CHERRYUSB_HOST_HID=y
-# CONFIG_RT_CHERRYUSB_HOST_MSC is not set
-# CONFIG_RT_CHERRYUSB_HOST_CDC_ECM is not set
-# CONFIG_RT_CHERRYUSB_HOST_CDC_RNDIS is not set
-# CONFIG_RT_CHERRYUSB_HOST_CDC_NCM is not set
-# CONFIG_RT_CHERRYUSB_HOST_VIDEO is not set
-# CONFIG_RT_CHERRYUSB_HOST_AUDIO is not set
-# CONFIG_RT_CHERRYUSB_HOST_BLUETOOTH is not set
-# CONFIG_RT_CHERRYUSB_HOST_ASIX is not set
-# CONFIG_RT_CHERRYUSB_HOST_RTL8152 is not set
-# CONFIG_RT_CHERRYUSB_HOST_FTDI is not set
-# CONFIG_RT_CHERRYUSB_HOST_CH34X is not set
-# CONFIG_RT_CHERRYUSB_HOST_CP210X is not set
-# CONFIG_RT_CHERRYUSB_HOST_PL2303 is not set
-# CONFIG_CHERRYUSB_HOST_TEMPLATE is not set
+# CONFIG_RT_USING_CHERRYUSB is not set
 # end of Device Drivers
 
 #
@@ -242,10 +207,10 @@ CONFIG_RT_USING_POSIX_FS=y
 # CONFIG_RT_USING_POSIX_DEVIO is not set
 # CONFIG_RT_USING_POSIX_STDIO is not set
 CONFIG_RT_USING_POSIX_POLL=y
-CONFIG_RT_USING_POSIX_SELECT=y
+# CONFIG_RT_USING_POSIX_SELECT is not set
 # CONFIG_RT_USING_POSIX_EVENTFD is not set
 # CONFIG_RT_USING_POSIX_TIMERFD is not set
-CONFIG_RT_USING_POSIX_SOCKET=y
+# CONFIG_RT_USING_POSIX_SOCKET is not set
 # CONFIG_RT_USING_POSIX_TERMIOS is not set
 # CONFIG_RT_USING_POSIX_AIO is not set
 # CONFIG_RT_USING_POSIX_MMAN is not set
@@ -274,88 +239,9 @@ CONFIG_RT_USING_POSIX_SOCKET=y
 #
 # Network
 #
-CONFIG_RT_USING_SAL=y
-CONFIG_SAL_INTERNET_CHECK=y
-
-#
-# Docking with protocol stacks
-#
-CONFIG_SAL_USING_LWIP=y
-# CONFIG_SAL_USING_AT is not set
-# CONFIG_SAL_USING_TLS is not set
-# end of Docking with protocol stacks
-
-CONFIG_SAL_USING_POSIX=y
-CONFIG_RT_USING_NETDEV=y
-CONFIG_NETDEV_USING_IFCONFIG=y
-CONFIG_NETDEV_USING_PING=y
-CONFIG_NETDEV_USING_NETSTAT=y
-CONFIG_NETDEV_USING_AUTO_DEFAULT=y
-# CONFIG_NETDEV_USING_LINK_STATUS_CALLBACK is not set
-# CONFIG_NETDEV_USING_IPV6 is not set
-CONFIG_NETDEV_IPV4=1
-CONFIG_NETDEV_IPV6=0
-CONFIG_RT_USING_LWIP=y
-# CONFIG_RT_USING_LWIP_LOCAL_VERSION is not set
-# CONFIG_RT_USING_LWIP141 is not set
-# CONFIG_RT_USING_LWIP203 is not set
-CONFIG_RT_USING_LWIP212=y
-# CONFIG_RT_USING_LWIP_LATEST is not set
-CONFIG_RT_USING_LWIP_VER_NUM=0x20102
-# CONFIG_RT_USING_LWIP_IPV6 is not set
-CONFIG_RT_LWIP_MEM_ALIGNMENT=4
-CONFIG_RT_LWIP_IGMP=y
-CONFIG_RT_LWIP_ICMP=y
-# CONFIG_RT_LWIP_SNMP is not set
-CONFIG_RT_LWIP_DNS=y
-CONFIG_RT_LWIP_DHCP=y
-CONFIG_IP_SOF_BROADCAST=1
-CONFIG_IP_SOF_BROADCAST_RECV=1
-
-#
-# Static IPv4 Address
-#
-CONFIG_RT_LWIP_IPADDR="192.168.1.30"
-CONFIG_RT_LWIP_GWADDR="192.168.1.1"
-CONFIG_RT_LWIP_MSKADDR="255.255.255.0"
-# end of Static IPv4 Address
-
-CONFIG_RT_LWIP_UDP=y
-CONFIG_RT_LWIP_TCP=y
-CONFIG_RT_LWIP_RAW=y
-# CONFIG_RT_LWIP_PPP is not set
-CONFIG_RT_MEMP_NUM_NETCONN=8
-CONFIG_RT_LWIP_PBUF_NUM=16
-CONFIG_RT_LWIP_RAW_PCB_NUM=4
-CONFIG_RT_LWIP_UDP_PCB_NUM=4
-CONFIG_RT_LWIP_TCP_PCB_NUM=4
-CONFIG_RT_LWIP_TCP_SEG_NUM=40
-CONFIG_RT_LWIP_TCP_SND_BUF=8196
-CONFIG_RT_LWIP_TCP_WND=8196
-CONFIG_RT_LWIP_TCPTHREAD_PRIORITY=10
-CONFIG_RT_LWIP_TCPTHREAD_MBOX_SIZE=8
-CONFIG_RT_LWIP_TCPTHREAD_STACKSIZE=1024
-CONFIG_LWIP_NO_RX_THREAD=y
-# CONFIG_LWIP_NO_TX_THREAD is not set
-CONFIG_RT_LWIP_ETHTHREAD_PRIORITY=12
-CONFIG_RT_LWIP_ETHTHREAD_STACKSIZE=1024
-CONFIG_RT_LWIP_ETHTHREAD_MBOX_SIZE=8
-# CONFIG_RT_LWIP_REASSEMBLY_FRAG is not set
-CONFIG_LWIP_NETIF_STATUS_CALLBACK=1
-CONFIG_LWIP_NETIF_LINK_CALLBACK=1
-CONFIG_RT_LWIP_NETIF_NAMESIZE=6
-CONFIG_SO_REUSE=1
-CONFIG_LWIP_SO_RCVTIMEO=1
-CONFIG_LWIP_SO_SNDTIMEO=1
-CONFIG_LWIP_SO_RCVBUF=1
-CONFIG_LWIP_SO_LINGER=0
-# CONFIG_RT_LWIP_NETIF_LOOPBACK is not set
-CONFIG_LWIP_NETIF_LOOPBACK=0
-# CONFIG_RT_LWIP_STATS is not set
-# CONFIG_RT_LWIP_USING_HW_CHECKSUM is not set
-CONFIG_RT_LWIP_USING_PING=y
-# CONFIG_LWIP_USING_DHCPD is not set
-# CONFIG_RT_LWIP_DEBUG is not set
+# CONFIG_RT_USING_SAL is not set
+# CONFIG_RT_USING_NETDEV is not set
+# CONFIG_RT_USING_LWIP is not set
 # CONFIG_RT_USING_AT is not set
 # end of Network
 
@@ -456,19 +342,7 @@ CONFIG_RT_LWIP_USING_PING=y
 
 # CONFIG_PKG_USING_COAP is not set
 # CONFIG_PKG_USING_NOPOLL is not set
-CONFIG_PKG_USING_NETUTILS=y
-CONFIG_PKG_NETUTILS_PATH="/packages/iot/netutils"
-# CONFIG_PKG_NETUTILS_TFTP is not set
-CONFIG_PKG_NETUTILS_IPERF=y
-CONFIG_IPERF_THREAD_STACK_SIZE=2048
-# CONFIG_PKG_NETUTILS_NETIO is not set
-# CONFIG_PKG_NETUTILS_NTP is not set
-# CONFIG_PKG_NETUTILS_TELNET is not set
-# CONFIG_PKG_NETUTILS_TCPDUMP is not set
-CONFIG_PKG_USING_NETUTILS_LATEST_VERSION=y
-# CONFIG_PKG_USING_NETUTILS_V133 is not set
-CONFIG_PKG_NETUTILS_VER="latest"
-CONFIG_PKG_NETUTILS_VER_NUM=0x99999
+# CONFIG_PKG_USING_NETUTILS is not set
 # CONFIG_PKG_USING_CMUX is not set
 # CONFIG_PKG_USING_PPP_DEVICE is not set
 # CONFIG_PKG_USING_AT_DEVICE is not set
@@ -560,6 +434,7 @@ CONFIG_PKG_NETUTILS_VER_NUM=0x99999
 # CONFIG_PKG_USING_JSMN is not set
 # CONFIG_PKG_USING_AGILE_JSMN is not set
 # CONFIG_PKG_USING_PARSON is not set
+# CONFIG_PKG_USING_RYAN_JSON is not set
 # end of JSON: JavaScript Object Notation, a lightweight data-interchange format
 
 #
@@ -770,6 +645,8 @@ CONFIG_PKG_NETUTILS_VER_NUM=0x99999
 #
 # STM32 HAL & SDK Drivers
 #
+# CONFIG_PKG_USING_STM32F4_HAL_DRIVER is not set
+# CONFIG_PKG_USING_STM32F4_CMSIS_DRIVER is not set
 # CONFIG_PKG_USING_STM32L4_HAL_DRIVER is not set
 # CONFIG_PKG_USING_STM32L4_CMSIS_DRIVER is not set
 # CONFIG_PKG_USING_STM32WB55_SDK is not set
@@ -963,6 +840,7 @@ CONFIG_PKG_NETUTILS_VER_NUM=0x99999
 # CONFIG_PKG_USING_SYSTEM_RUN_LED is not set
 # CONFIG_PKG_USING_BT_MX01 is not set
 # CONFIG_PKG_USING_RGPOWER is not set
+# CONFIG_PKG_USING_BT_MX02 is not set
 # CONFIG_PKG_USING_SPI_TOOLS is not set
 # end of peripheral libraries and drivers
 
@@ -1072,6 +950,7 @@ CONFIG_PKG_NETUTILS_VER_NUM=0x99999
 # CONFIG_PKG_USING_ARDUINO_MSGQ_C_CPP_DEMO is not set
 # CONFIG_PKG_USING_ARDUINO_SKETCH_LOADER_DEMO is not set
 # CONFIG_PKG_USING_ARDUINO_ULTRASOUND_RADAR is not set
+# CONFIG_PKG_USING_ARDUINO_RTDUINO_SENSORFUSION_SHIELD is not set
 # CONFIG_PKG_USING_ARDUINO_NINEINONE_SENSOR_SHIELD is not set
 # CONFIG_PKG_USING_ARDUINO_SENSOR_KIT is not set
 # CONFIG_PKG_USING_ARDUINO_MATLAB_SUPPORT is not set
@@ -1328,9 +1207,7 @@ CONFIG_BSP_USING_RTC=y
 # CONFIG_BSP_USING_DAO is not set
 # CONFIG_BSP_USING_PDM is not set
 # CONFIG_BSP_USING_I2S is not set
-CONFIG_BSP_USING_USB=y
-CONFIG_BSP_USING_USB_DEVICE=y
-# CONFIG_BSP_USING_USB_HOST is not set
+# CONFIG_BSP_USING_USB is not set
 # CONFIG_BSP_USING_WDG is not set
 # CONFIG_BSP_USING_CAN is not set
 # CONFIG_BSP_USING_ADC is not set

bsp/hpmicro/hpm6750evk2/board/Kconfig

@@ -161,7 +161,7 @@ menu "On-chip Peripheral Drivers"
        default n
 
        select RT_USING_ETH
-       if BSP_USING_ETH          
+       if BSP_USING_ETH
                config BSP_USING_ETH0
                bool "Enable ETH0"
                default y
@@ -170,7 +170,7 @@ menu "On-chip Peripheral Drivers"
                config BSP_USING_ETH1
                bool "Enable ETH1"
                default n
-               select BSP_USING_ENET_PHY_RTL8201           
+               select BSP_USING_ENET_PHY_RTL8201
        endif
 
     menuconfig BSP_USING_SDXC
@@ -361,12 +361,25 @@ menu "On-chip Peripheral Drivers"
        default n
        if BSP_USING_USB
             config BSP_USING_USB_DEVICE
-                bool "Enable USB Device"
+                bool "Enable USB Device, default is msc ramdisk"
                 default n
+                select RT_USING_CHERRYUSB
+                select RT_CHERRYUSB_DEVICE
+                select RT_CHERRYUSB_DEVICE_SPEED_HS
+                select RT_CHERRYUSB_DEVICE_HPM
+                select RT_CHERRYUSB_DEVICE_MSC
+                select RT_CHERRYUSB_DEVICE_TEMPLATE_MSC
             config BSP_USING_USB_HOST
                 bool "Enable USB Host"
-                select RT_USING_CACHE
                 default n
+                select RT_USING_CACHE
+                select RT_USING_CHERRYUSB
+                select RT_CHERRYUSB_HOST
+                select RT_CHERRYUSB_HOST_EHCI_HPM
+                select RT_CHERRYUSB_HOST_CDC_ACM
+                select RT_CHERRYUSB_HOST_HID
+                select RT_CHERRYUSB_HOST_MSC
+                select RT_CHERRYUSB_HOST_CDC_RNDIS
        endif
 
 

bsp/hpmicro/hpm6750evk2/board/SConscript

@@ -8,6 +8,7 @@ src = Split("""
     rtt_board.c
     pinmux.c
     fal_flash_port.c
+    cherryusb_port.c
     hpm_wm8960.c
 """)
 

bsp/hpmicro/hpm6750evk2/board/cherryusb_port.c

@@ -8,7 +8,34 @@
  * 2024/04/23     sakumisu    first version
  */
 #include <rtthread.h>
+#include <board.h>
 
 /* low level init here, this has implemented in cherryusb */
 
 /* low level deinit here, this has implemented in cherryusb */
+
+#ifdef RT_CHERRYUSB_DEVICE_TEMPLATE_MSC
+int cherryusb_devinit(void)
+{
+    extern void msc_ram_init(uint8_t busid, uintptr_t reg_base);
+
+    board_init_usb_pins();
+
+    msc_ram_init(0, HPM_USB0_BASE);
+    return 0;
+}
+INIT_COMPONENT_EXPORT(cherryusb_devinit);
+#endif
+
+#ifdef RT_CHERRYUSB_HOST
+#include "usbh_core.h"
+
+int cherryusb_hostinit(void)
+{
+    board_init_usb_pins();
+
+    usbh_initialize(0, HPM_USB0_BASE);
+    return 0;
+}
+INIT_COMPONENT_EXPORT(cherryusb_hostinit);
+#endif

bsp/hpmicro/hpm6750evk2/board/rtt_board.c

@@ -121,3 +121,14 @@ void rt_hw_cpu_reset(void)
 }
 
 MSH_CMD_EXPORT_ALIAS(rt_hw_cpu_reset, reset, reset the board);
+
+#ifdef RT_USING_CACHE
+void rt_hw_cpu_dcache_ops(int ops, void *addr, int size)
+{
+    if (ops == RT_HW_CACHE_FLUSH) {
+        l1c_dc_flush((uint32_t)addr, size);
+    } else {
+        l1c_dc_invalidate((uint32_t)addr, size);
+    }
+}
+#endif

bsp/hpmicro/hpm6750evk2/board/usb_config.h

@@ -6,20 +6,12 @@
 #ifndef CHERRYUSB_CONFIG_H
 #define CHERRYUSB_CONFIG_H
 
-#define CHERRYUSB_VERSION     0x010300
-#define CHERRYUSB_VERSION_STR "v1.3.0"
-
-/* ================ USB common Configuration ================ */
-
 #include <rtthread.h>
 #include "hpm_soc_feature.h"
 
-#define CONFIG_USB_PRINTF(...) rt_kprintf(__VA_ARGS__)
-
-#define usb_malloc(size) rt_malloc(size)
-#define usb_free(ptr)    rt_free(ptr)
+/* ================ USB common Configuration ================ */
 
-#define memcpy rt_memcpy
+#define CONFIG_USB_PRINTF(...) rt_kprintf(__VA_ARGS__)
 
 #ifndef CONFIG_USB_DBG_LEVEL
 #define CONFIG_USB_DBG_LEVEL USB_DBG_INFO
@@ -77,6 +69,10 @@
 #define CONFIG_USBDEV_MSC_VERSION_STRING "0.01"
 #endif
 
+/* move msc read & write from isr to while(1), you should call usbd_msc_polling in while(1) */
+// #define CONFIG_USBDEV_MSC_POLLING
+
+/* move msc read & write from isr to thread */
 // #define CONFIG_USBDEV_MSC_THREAD
 
 #ifndef CONFIG_USBDEV_MSC_PRIO
@@ -173,6 +169,17 @@
 #define CONFIG_USBHOST_CDC_NCM_ETH_MAX_TX_SIZE (2048)
 #endif
 
+/* This parameter affects usb performance, and depends on (TCP_WND)tcp eceive windows size,
+ * you can change to 2K ~ 16K and must be larger than TCP RX windows size in order to avoid being overflow.
+ */
+#ifndef CONFIG_USBHOST_ASIX_ETH_MAX_RX_SIZE
+#define CONFIG_USBHOST_ASIX_ETH_MAX_RX_SIZE (2048)
+#endif
+/* Because lwip do not support multi pbuf at a time, so increasing this variable has no performance improvement */
+#ifndef CONFIG_USBHOST_ASIX_ETH_MAX_TX_SIZE
+#define CONFIG_USBHOST_ASIX_ETH_MAX_TX_SIZE (2048)
+#endif
+
 /* This parameter affects usb performance, and depends on (TCP_WND)tcp eceive windows size,
  * you can change to 2K ~ 16K and must be larger than TCP RX windows size in order to avoid being overflow.
  */
@@ -208,7 +215,11 @@
 //#define CONFIG_USBDEV_FSDEV_PMA_ACCESS 2 // maybe 1 or 2, many chips may have a difference
 
 /* ---------------- DWC2 Configuration ---------------- */
+/* (5 * number of control endpoints + 8) + ((largest USB packet used / 4) + 1 for
+ * status information) + (2 * number of OUT endpoints) + 1 for Global NAK
+ */
 // #define CONFIG_USB_DWC2_RXALL_FIFO_SIZE (1024 / 4)
+/* IN Endpoints Max packet Size / 4 */
 // #define CONFIG_USB_DWC2_TX0_FIFO_SIZE (64 / 4)
 // #define CONFIG_USB_DWC2_TX1_FIFO_SIZE (512 / 4)
 // #define CONFIG_USB_DWC2_TX2_FIFO_SIZE (64 / 4)
@@ -264,4 +275,5 @@
 // #define CONFIG_USB_MUSB_SUNXI
 
 #define CONFIG_USB_EHCI_HPMICRO         (1)
+
 #endif

bsp/hpmicro/hpm6750evk2/rtconfig.h

@@ -96,11 +96,6 @@
 #define RT_SERIAL_RB_BUFSZ 64
 #define RT_USING_RTC
 #define RT_USING_PIN
-#define RT_USING_CHERRYUSB
-#define RT_CHERRYUSB_HOST
-#define RT_CHERRYUSB_HOST_EHCI_HPM
-#define RT_CHERRYUSB_HOST_CDC_ACM
-#define RT_CHERRYUSB_HOST_HID
 /* end of Device Drivers */
 
 /* C/C++ and POSIX layer */
@@ -120,8 +115,6 @@
 
 #define RT_USING_POSIX_FS
 #define RT_USING_POSIX_POLL
-#define RT_USING_POSIX_SELECT
-#define RT_USING_POSIX_SOCKET
 
 /* Interprocess Communication (IPC) */
 
@@ -134,66 +127,6 @@
 
 /* Network */
 
-#define RT_USING_SAL
-#define SAL_INTERNET_CHECK
-
-/* Docking with protocol stacks */
-
-#define SAL_USING_LWIP
-/* end of Docking with protocol stacks */
-#define SAL_USING_POSIX
-#define RT_USING_NETDEV
-#define NETDEV_USING_IFCONFIG
-#define NETDEV_USING_PING
-#define NETDEV_USING_NETSTAT
-#define NETDEV_USING_AUTO_DEFAULT
-#define NETDEV_IPV4 1
-#define NETDEV_IPV6 0
-#define RT_USING_LWIP
-#define RT_USING_LWIP212
-#define RT_USING_LWIP_VER_NUM 0x20102
-#define RT_LWIP_MEM_ALIGNMENT 4
-#define RT_LWIP_IGMP
-#define RT_LWIP_ICMP
-#define RT_LWIP_DNS
-#define RT_LWIP_DHCP
-#define IP_SOF_BROADCAST 1
-#define IP_SOF_BROADCAST_RECV 1
-
-/* Static IPv4 Address */
-
-#define RT_LWIP_IPADDR "192.168.1.30"
-#define RT_LWIP_GWADDR "192.168.1.1"
-#define RT_LWIP_MSKADDR "255.255.255.0"
-/* end of Static IPv4 Address */
-#define RT_LWIP_UDP
-#define RT_LWIP_TCP
-#define RT_LWIP_RAW
-#define RT_MEMP_NUM_NETCONN 8
-#define RT_LWIP_PBUF_NUM 16
-#define RT_LWIP_RAW_PCB_NUM 4
-#define RT_LWIP_UDP_PCB_NUM 4
-#define RT_LWIP_TCP_PCB_NUM 4
-#define RT_LWIP_TCP_SEG_NUM 40
-#define RT_LWIP_TCP_SND_BUF 8196
-#define RT_LWIP_TCP_WND 8196
-#define RT_LWIP_TCPTHREAD_PRIORITY 10
-#define RT_LWIP_TCPTHREAD_MBOX_SIZE 8
-#define RT_LWIP_TCPTHREAD_STACKSIZE 1024
-#define LWIP_NO_RX_THREAD
-#define RT_LWIP_ETHTHREAD_PRIORITY 12
-#define RT_LWIP_ETHTHREAD_STACKSIZE 1024
-#define RT_LWIP_ETHTHREAD_MBOX_SIZE 8
-#define LWIP_NETIF_STATUS_CALLBACK 1
-#define LWIP_NETIF_LINK_CALLBACK 1
-#define RT_LWIP_NETIF_NAMESIZE 6
-#define SO_REUSE 1
-#define LWIP_SO_RCVTIMEO 1
-#define LWIP_SO_SNDTIMEO 1
-#define LWIP_SO_RCVBUF 1
-#define LWIP_SO_LINGER 0
-#define LWIP_NETIF_LOOPBACK 0
-#define RT_LWIP_USING_PING
 /* end of Network */
 
 /* Memory protection */
@@ -240,11 +173,6 @@
 
 /* end of CYW43439 WiFi */
 /* end of Wi-Fi */
-#define PKG_USING_NETUTILS
-#define PKG_NETUTILS_IPERF
-#define IPERF_THREAD_STACK_SIZE 2048
-#define PKG_USING_NETUTILS_LATEST_VERSION
-#define PKG_NETUTILS_VER_NUM 0x99999
 
 /* IoT Cloud */
 
@@ -405,8 +333,6 @@
 #define BSP_USING_UART
 #define BSP_USING_UART0
 #define BSP_USING_RTC
-#define BSP_USING_USB
-#define BSP_USING_USB_DEVICE
 /* end of On-chip Peripheral Drivers */
 /* end of Hardware Drivers Config */
 

bsp/hpmicro/hpm6750evkmini/board/rtt_board.c

@@ -121,3 +121,14 @@ void rt_hw_cpu_reset(void)
 }
 
 MSH_CMD_EXPORT_ALIAS(rt_hw_cpu_reset, reset, reset the board);
+
+#ifdef RT_USING_CACHE
+void rt_hw_cpu_dcache_ops(int ops, void *addr, int size)
+{
+    if (ops == RT_HW_CACHE_FLUSH) {
+        l1c_dc_flush((uint32_t)addr, size);
+    } else {
+        l1c_dc_invalidate((uint32_t)addr, size);
+    }
+}
+#endif