fix the code sytle

bsp/maxim/MAX32660_EVSYS/README.md

@@ -12,7 +12,7 @@
 
 开发板datasheet： [MAX32660-EVSYS.pdf)](https://datasheets.maximintegrated.com/en/ds/MAX32660-EVSYS.pdf)
 
-支持IDE: keil， [eclipse](https://www.maximintegrated.com/en/design/software-description.html/swpart=SFW0001500A)
+支持IDE: [keil pack](http://www.mxim.net/microcontroller/pack/Maxim.MAX32660.1.2.0.pack)， [eclipse](https://www.maximintegrated.com/en/design/software-description.html/swpart=SFW0001500A)
 
 本文主要内容如下：
 
@@ -70,17 +70,17 @@ MAX32660-EVSYS开发板常用 **板载资源** 如下：
 
 本 BSP 目前对外设的支持情况如下：
 
-| **片上外设** | **支持情况** |   **备注**   |
-| :----------- | :----------: | :----------: |
-| GPIO         |              |              |
-| UART         |     支持     | UART0, UART1 |
-| PWM          |              |              |
-| SPI          |              |              |
-| RTC          |              |              |
-| I2S          |              |              |
-| I2C          |              |              |
-| TIMER        |              |              |
-| Watchdog     |              |              |
+| **片上外设** | **支持情况** |       **备注**        |
+| :----------- | :----------: | :-------------------: |
+| GPIO         |              |                       |
+| UART         |     支持     | UART0, UART1(console) |
+| PWM          |              |                       |
+| SPI          |              |                       |
+| RTC          |              |                       |
+| I2S          |              |                       |
+| I2C          |              |                       |
+| TIMER        |              |                       |
+| Watchdog     |              |                       |
 
 
 

bsp/maxim/MAX32660_EVSYS/board/board.h

@@ -1,3 +1,13 @@
+/*
+ * Copyright (c) 2006-2020, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2021-02-11     supperthomas first version
+ *
+ */
 #ifndef _BOARD_H_
 #define _BOARD_H_
 

bsp/maxim/libraries/HAL_Drivers/drv_uart.c

@@ -15,19 +15,22 @@
 #include "rtdevice.h"
 #ifdef RT_USING_SERIAL
 
+//#define DRV_DEBUG
+//#define LOG_TAG             "drv.usart"
+//#include <drv_log.h>
+
 #define UART0_CONFIG                                                \
     {                                                               \
         .name = "uart0",                                            \
-        .Instance = MXC_UART_GET_UART(0),                                         \
-        .irq_type = MXC_UART_GET_IRQ(0),                                    \
+        .Instance = MXC_UART_GET_UART(0),                           \
+        .irq_type = MXC_UART_GET_IRQ(0),                            \
     }
 
-
 #define UART1_CONFIG                                                \
     {                                                               \
         .name = "uart1",                                            \
-        .Instance = MXC_UART_GET_UART(1),                                         \
-        .irq_type = MXC_UART_GET_IRQ(1),                                    \
+        .Instance = MXC_UART_GET_UART(1),                           \
+        .irq_type = MXC_UART_GET_IRQ(1),                            \
     }
 
 struct mcu_uart_config
@@ -49,10 +52,6 @@ struct mcu_uart
 
 
 
-//#define DRV_DEBUG
-//#define LOG_TAG             "drv.usart"
-//#include <drv_log.h>
-
 #if !defined(BSP_USING_UART0) && !defined(BSP_USING_UART1)
 
 #error "Please define at least one BSP_USING_UARTx"
@@ -92,7 +91,7 @@ void UART1_IRQHandler(void)
     uint32_t  intst = 0;
     intst = MXC_UART1->int_fl;
     MXC_UART1->int_fl = intst;
-    
+
     rt_interrupt_leave();
 }
 #endif
@@ -138,9 +137,10 @@ static rt_err_t mcu_configure(struct rt_serial_device *serial, struct serial_con
     mcu_cfg.pol = UART_FLOW_POL_EN;
 
     error = UART_Init(uart->handle, &mcu_cfg, &sys_uart_cfg);
-    if (error != E_NO_ERROR) {
+    if (error != E_NO_ERROR)
+    {
         rt_kprintf("Error initializing UART %d\n", error);
-        while(1) {}
+        while (1) {}
     }
     return RT_EOK;
 }
@@ -171,7 +171,7 @@ static rt_err_t mcu_control(struct rt_serial_device *serial, int cmd, void *arg)
         uart->handle->ctrl |=  0x05 << MXC_F_UART_CTRL_RX_TO_POS;
         uart->handle->int_en |= MXC_F_UART_INT_EN_RX_FIFO_THRESH | \
                                 MXC_F_UART_INT_EN_RX_TIMEOUT;
-    
+
         uart->handle->int_en |= MXC_F_UART_INT_EN_RX_FRAME_ERROR | \
                                 MXC_F_UART_INT_EN_RX_PARITY_ERROR | \
                                 MXC_F_UART_INT_EN_RX_OVERRUN ;