/*!
 * @file        apm32f0xx_gpio.h
 *
 * @brief       This file contains all the functions prototypes for the GPIO firmware library
 *
 * @version     V1.0.3
 *
 * @date        2022-09-20
 *
 * @attention
 *
 *  Copyright (C) 2020-2022 Geehy Semiconductor
 *
 *  You may not use this file except in compliance with the
 *  GEEHY COPYRIGHT NOTICE (GEEHY SOFTWARE PACKAGE LICENSE).
 *
 *  The program is only for reference, which is distributed in the hope
 *  that it will be useful and instructional for customers to develop
 *  their software. Unless required by applicable law or agreed to in
 *  writing, the program is distributed on an "AS IS" BASIS, WITHOUT
 *  ANY WARRANTY OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the GEEHY SOFTWARE PACKAGE LICENSE for the governing permissions
 *  and limitations under the License.
 */


/* Define to prevent recursive inclusion */
#ifndef __APM32F0XX_GPIO_H
#define __APM32F0XX_GPIO_H

#ifdef __cplusplus
extern "C" {
#endif

/* Includes */
#include "apm32f0xx.h"

/** @addtogroup APM32F0xx_StdPeriphDriver
  @{
*/

/** @addtogroup GPIO_Driver
  @{
*/

/** @defgroup GPIO_Macros Macros
  @{
*/

/**@} end of group GPIO_Macros */

/** @defgroup GPIO_Enumerations Enumerations
  @{
*/

/**
 * @brief   Configuration Mode enumeration
 */
typedef enum
{
    GPIO_MODE_IN  = 0x00,     /*!< GPIO Input Mode */
    GPIO_MODE_OUT = 0x01,     /*!< GPIO Output Mode */
    GPIO_MODE_AF  = 0x02,     /*!< GPIO Alternate function Mode */
    GPIO_MODE_AN  = 0x03,     /*!< GPIO Analog In/Out Mode */
} GPIO_MODE_T;

/**
 * @brief   Output type enumeration
 */
typedef enum
{
    GPIO_OUT_TYPE_PP = 0x00,      /*!< General purpose output push-pull */
    GPIO_OUT_TYPE_OD = 0x01,      /*!< General purpose output Open-drain */
} GPIO_OUT_TYPE_T;

/**
 * @brief   GPIO Output Maximum frequency selection
 */
typedef enum
{
    GPIO_SPEED_2MHz  = 0x00,      /*!< Output speed up to 2 MHz */
    GPIO_SPEED_10MHz = 0x01,      /*!< Output speed up to 10 MHz */
    GPIO_SPEED_50MHz = 0x03,      /*!< Output speed up to 50 MHz */
} GPIO_SPEED_T;

/**
 * @brief   Configuration Pull-Up Pull-Down enumeration
 */
typedef enum
{
    GPIO_PUPD_NO = 0x00,          /*!< GPIO no pull mode */
    GPIO_PUPD_PU = 0x01,          /*!< GPIO pull-up mode */
    GPIO_PUPD_PD = 0x02,          /*!< GPIO pull-down mode */
} GPIO_PUPD_T;

/**
 * @brief   Bit SET and Bit RESET enumeration
 */
typedef enum
{
    Bit_RESET,
    Bit_SET
} GPIO_BSRET_T;

/**
 * @brief    Definition of the GPIO pins
 */
typedef enum
{
    GPIO_PIN_0   = ((uint16_t)BIT0),    /*!< GPIO pin 0 selected */
    GPIO_PIN_1   = ((uint16_t)BIT1),    /*!< GPIO pin 1 selected */
    GPIO_PIN_2   = ((uint16_t)BIT2),    /*!< GPIO pin 2 selected */
    GPIO_PIN_3   = ((uint16_t)BIT3),    /*!< GPIO pin 3 selected */
    GPIO_PIN_4   = ((uint16_t)BIT4),    /*!< GPIO pin 4 selected */
    GPIO_PIN_5   = ((uint16_t)BIT5),    /*!< GPIO pin 5 selected */
    GPIO_PIN_6   = ((uint16_t)BIT6),    /*!< GPIO pin 6 selected */
    GPIO_PIN_7   = ((uint16_t)BIT7),    /*!< GPIO pin 7 selected */
    GPIO_PIN_8   = ((uint16_t)BIT8),    /*!< GPIO pin 8 selected */
    GPIO_PIN_9   = ((uint16_t)BIT9),    /*!< GPIO pin 9 selected */
    GPIO_PIN_10  = ((uint16_t)BIT10),   /*!< GPIO pin 10 selected */
    GPIO_PIN_11  = ((uint16_t)BIT11),   /*!< GPIO pin 11 selected */
    GPIO_PIN_12  = ((uint16_t)BIT12),   /*!< GPIO pin 12 selected */
    GPIO_PIN_13  = ((uint16_t)BIT13),   /*!< GPIO pin 13 selected */
    GPIO_PIN_14  = ((uint16_t)BIT14),   /*!< GPIO pin 14 selected */
    GPIO_PIN_15  = ((uint16_t)BIT15),   /*!< GPIO pin 15 selected */
    GPIO_PIN_ALL = ((uint32_t)0XFFFF),  /*!< GPIO all pins selected */
} GPIO_PIN_T;

/**
 * @brief   GPIO Pin sources
 */
typedef enum
{
    GPIO_PIN_SOURCE_0   = ((uint8_t)0x00),  /*!< GPIO pin source 0 */
    GPIO_PIN_SOURCE_1   = ((uint8_t)0x01),  /*!< GPIO pin source 1 */
    GPIO_PIN_SOURCE_2   = ((uint8_t)0x02),  /*!< GPIO pin source 2 */
    GPIO_PIN_SOURCE_3   = ((uint8_t)0x03),  /*!< GPIO pin source 3 */
    GPIO_PIN_SOURCE_4   = ((uint8_t)0x04),  /*!< GPIO pin source 4 */
    GPIO_PIN_SOURCE_5   = ((uint8_t)0x05),  /*!< GPIO pin source 5 */
    GPIO_PIN_SOURCE_6   = ((uint8_t)0x06),  /*!< GPIO pin source 6 */
    GPIO_PIN_SOURCE_7   = ((uint8_t)0x07),  /*!< GPIO pin source 7 */
    GPIO_PIN_SOURCE_8   = ((uint8_t)0x08),  /*!< GPIO pin source 8 */
    GPIO_PIN_SOURCE_9   = ((uint8_t)0x09),  /*!< GPIO pin source 9 */
    GPIO_PIN_SOURCE_10  = ((uint8_t)0x0A),  /*!< GPIO pin source 10 */
    GPIO_PIN_SOURCE_11  = ((uint8_t)0x0B),  /*!< GPIO pin source 11 */
    GPIO_PIN_SOURCE_12  = ((uint8_t)0x0C),  /*!< GPIO pin source 12 */
    GPIO_PIN_SOURCE_13  = ((uint8_t)0x0D),  /*!< GPIO pin source 13 */
    GPIO_PIN_SOURCE_14  = ((uint8_t)0x0E),  /*!< GPIO pin source 14 */
    GPIO_PIN_SOURCE_15  = ((uint8_t)0x0F),  /*!< GPIO pin source 15 */
} GPIO_PIN_SOURCE_T;

/**
 * @brief   gpio alternate function define
 */
typedef enum
{
    GPIO_AF_PIN0 = ((uint8_t)0x00),  /*!< GPIO alternate function pin 0 */
    GPIO_AF_PIN1 = ((uint8_t)0x01),  /*!< GPIO alternate function pin 1 */
    GPIO_AF_PIN2 = ((uint8_t)0x02),  /*!< GPIO alternate function pin 2 */
    GPIO_AF_PIN3 = ((uint8_t)0x03),  /*!< GPIO alternate function pin 3 */
    GPIO_AF_PIN4 = ((uint8_t)0x04),  /*!< GPIO alternate function pin 4 */
    GPIO_AF_PIN5 = ((uint8_t)0x05),  /*!< GPIO alternate function pin 5 */
    GPIO_AF_PIN6 = ((uint8_t)0x06),  /*!< GPIO alternate function pin 6 */
    GPIO_AF_PIN7 = ((uint8_t)0x07),  /*!< GPIO alternate function pin 7 */
} GPIO_AF_T;

/**@} end of group GPIO_Enumerations */

/** @defgroup GPIO_Structures Structures
  @{
*/

/**
 * @brief   GPIO Config structure definition
 */
typedef struct
{
    uint16_t         pin;      /*!< Specifies the GPIO pins to be configured */
    GPIO_MODE_T      mode;     /*!< Specifies the operating mode for the selected pins */
    GPIO_OUT_TYPE_T  outtype;  /*!< Specifies the speed for the selected pins */
    GPIO_SPEED_T     speed;    /*!< Specifies the operating output type for the selected pins */
    GPIO_PUPD_T      pupd;     /*!< Specifies the operating Pull-up/Pull down for the selected pins */
} GPIO_Config_T;

/**@} end of group GPIO_Structures */

/** @defgroup GPIO_Variables Variables
  @{
*/

/**@} end of group GPIO_Variables*/

/** @defgroup GPIO_Functions Functions
  @{
*/

/* Reset and common Configuration */
void GPIO_Reset(GPIO_T* port);
void GPIO_Config(GPIO_T* port, GPIO_Config_T* gpioConfig);
void GPIO_ConfigStructInit(GPIO_Config_T* gpioConfig);

/* GPIO Lock functions */
void GPIO_ConfigPinLock(GPIO_T* port, uint16_t pin);

/* GPIO Read functions */
uint16_t GPIO_ReadOutputPort(GPIO_T* port);
uint16_t GPIO_ReadInputPort(GPIO_T* port);
uint8_t GPIO_ReadInputBit(GPIO_T* port, uint16_t pin);
uint8_t GPIO_ReadOutputBit(GPIO_T* port, uint16_t pin);

/* GPIO Write functions */
void GPIO_SetBit(GPIO_T* port, uint16_t pin);
void GPIO_ClearBit(GPIO_T* port, uint16_t pin);
void GPIO_WriteBitValue(GPIO_T* port, uint16_t pin, GPIO_BSRET_T bitVal);
void GPIO_WriteOutputPort(GPIO_T* port, uint16_t portValue);

/* GPIO Other functions */
void GPIO_ConfigPinAF(GPIO_T* port, GPIO_PIN_SOURCE_T pinSource, GPIO_AF_T afPin);

#ifdef __cplusplus
}
#endif

#endif /* __APM32F0xx_GPIO_H */

/**@} end of group GPIO_Functions */
/**@} end of group GPIO_Driver */
/**@} end of group APM32F0xx_StdPeriphDriver */