rt-thread/bsp/apm32/libraries/APM32F10x_Library/APM32F10x_StdPeriphDriver/inc/apm32f10x_usart.h

/*!
 * @file       apm32f10x_usart.h
 *
 * @brief      This file contains all the functions prototypes for the USART firmware library
 *
 * @version    V1.0.1
 *
 * @date       2021-03-23
 *
 */

#ifndef __APM32F10X_USART_H
#define __APM32F10X_USART_H

#include "apm32f10x.h"

#ifdef __cplusplus
extern "C" {
#endif

/** @addtogroup Peripherals_Library Standard Peripheral Library
  @{
*/

/** @addtogroup USART_Driver USART Driver
  @{
*/

/** @addtogroup USART_Enumerations Enumerations
  @{
*/

/**
 * @brief   USART Word Length define
 */
typedef enum
{
    USART_WORD_LEN_8B = 0,
    USART_WORD_LEN_9B = BIT12
} USART_WORD_LEN_T;

/**
 * @brief   USART Stop bits define
 */
typedef enum
{
    USART_STOP_BIT_1   = 0,
    USART_STOP_BIT_0_5 = BIT12,
    USART_STOP_BIT_2   = BIT13,
    USART_STOP_BIT_1_5 = BIT12 | BIT13
} USART_STOP_BIT_T;

/**
 * @brief   USART Parity define
 */
typedef enum
{
    USART_PARITY_NONE  = 0,
    USART_PARITY_EVEN  = BIT10,
    USART_PARITY_ODD   = BIT10 | BIT9
} USART_PARITY_T;

/**
 * @brief   USART mode define
 */
typedef enum
{
    USART_MODE_RX      = BIT2,
    USART_MODE_TX      = BIT3,
    USART_MODE_TX_RX   = BIT2 | BIT3
} USART_MODE_T;

/**
 * @brief   USART hardware flow control define
 */
typedef enum
{
    USART_HARDWARE_FLOW_NONE    = 0,
    USART_HARDWARE_FLOW_RTS     = BIT8,
    USART_HARDWARE_FLOW_CTS     = BIT9,
    USART_HARDWARE_FLOW_RTS_CTS = BIT8 | BIT9
} USART_HARDWARE_FLOW_T;

/**
 * @brief   USART Clock enable
 */
typedef enum
{
    USART_CLKEN_DISABLE,
    USART_CLKEN_ENABLE
} USART_CLKEN_T;

/**
 * @brief   USART Clock polarity define
 */
typedef enum
{
    USART_CLKPOL_LOW,
    USART_CLKPOL_HIGH
} USART_CLKPOL_T;

/**
 * @brief   USART Clock phase define
 */
typedef enum
{
    USART_CLKPHA_1EDGE,
    USART_CLKPHA_2EDGE
} USART_CLKPHA_T;

/**
 * @brief   USART Last bit clock pulse enable
 */
typedef enum
{
    USART_LBCP_DISABLE,
    USART_LBCP_ENABLE,
} USART_LBCP_T;

/**
 * @brief   USART Interrupt Source
 */
typedef enum
{
    USART_INT_PE     = 0x0010100,
    USART_INT_TXBE   = 0x7010080,
    USART_INT_TXC    = 0x6010040,
    USART_INT_RXBNE  = 0x5010020,
    USART_INT_IDLE   = 0x4010010,
    USART_INT_LBD    = 0x8020040,
    USART_INT_CTS    = 0x9040400,
    USART_INT_ERR    = 0x0040001,
    USART_INT_OVRE   = 0x3040001,
    USART_INT_NE     = 0x2040001,
    USART_INT_FE     = 0x1040001
} USART_INT_T;

/**
 * @brief   USART DMA enable
 */
typedef enum
{
    USART_DMA_TX    = BIT7,
    USART_DMA_RX    = BIT6,
    USART_DMA_TX_RX = BIT6 | BIT7
} USART_DMA_T;

/**
 * @brief   USART Wakeup method
 */
typedef enum
{
    USART_WAKEUP_IDLE_LINE,
    USART_WAKEUP_ADDRESS_MARK
} USART_WAKEUP_T;

/**
 * @brief   USART LIN break detection length
 */
typedef enum
{
    USART_LBDL_10B,
    USART_LBDL_11B
} USART_LBDL_T;

/**
 * @brief   USART IrDA low-power
 */
typedef enum
{
    USART_IRDALP_NORMAL,
    USART_IRDALP_LOWPOWER
} USART_IRDALP_T;

/**
 * @brief   USART flag define
 */
typedef enum
{
    USART_FLAG_CTS       = 0x0200,
    USART_FLAG_LBD       = 0x0100,
    USART_FLAG_TXBE      = 0x0080,
    USART_FLAG_TXC       = 0x0040,
    USART_FLAG_RXBNE     = 0x0020,
    USART_FLAG_IDLE      = 0x0010,
    USART_FLAG_OVRE      = 0x0008,
    USART_FLAG_NE        = 0x0004,
    USART_FLAG_FE        = 0x0002,
    USART_FLAG_PE        = 0x0001
} USART_FLAG_T;

/**@} end of group USART_Enumerations*/

/** @addtogroup USART_Structure Data Structure
  @{
*/

/**
 * @brief   USART Config struct definition
 */
typedef struct
{
    uint32_t                  baudRate;          //!< Specifies the baud rate
    USART_WORD_LEN_T          wordLength;        //!< Specifies the word length
    USART_STOP_BIT_T          stopBits;          //!< Specifies the stop bits
    USART_PARITY_T            parity;            //!< Specifies the parity
    USART_MODE_T              mode;              //!< Specifies the mode
    USART_HARDWARE_FLOW_T     hardwareFlow;      //!< Specifies the hardware flow control
} USART_Config_T;

/**
 * @brief   USART synchronous communication clock config struct definition
 */
typedef struct
{
    USART_CLKEN_T             clock;             //!< Enable or Disable Clock
    USART_CLKPOL_T            polarity;          //!< Specifies the clock polarity
    USART_CLKPHA_T            phase;             //!< Specifies the clock phase
    USART_LBCP_T              lastBit;           //!< Enable or Disable last bit clock
} USART_ClockConfig_T;

/**@} end of group USART_Structure*/

/** @addtogroup USART_Fuctions Fuctions
  @{
*/

/** USART Reset and Configuration */
void USART_Reset(USART_T* usart);
void USART_Config(USART_T* uart, USART_Config_T* usartConfig);
void USART_ConfigStructInit(USART_Config_T* usartConfig);
void USART_Address(USART_T* usart, uint8_t address);
void USART_Enable(USART_T* usart);
void USART_Disable(USART_T* usart);

/** Clock communication */
void USART_ConfigClock(USART_T* usart, USART_ClockConfig_T* clockConfig);
void USART_ConfigClockStructInit(USART_ClockConfig_T* clockConfig);

/** DMA mode */
void USART_EnableDMA(USART_T* usart, USART_DMA_T dmaReq);
void USART_DisableDMA(USART_T* usart, USART_DMA_T dmaReq);

/** Mute mode */
void USART_ConfigWakeUp(USART_T* usart, USART_WAKEUP_T wakeup);
void USART_EnableMuteMode(USART_T* usart);
void USART_DisableMuteMode(USART_T* usart);

/** LIN mode */
void USART_ConfigLINBreakDetectLength(USART_T* usart, USART_LBDL_T length);
void USART_EnableLIN(USART_T* usart);
void USART_DisableLIN(USART_T* usart);

/** Transmit and receive */
void USART_EnableTx(USART_T* usart);
void USART_DisableTx(USART_T* usart);
void USART_EnableRx(USART_T* usart);
void USART_DisableRx(USART_T* usart);
void USART_TxData(USART_T* usart, uint16_t data);
uint16_t USART_RxData(USART_T* usart);
void USART_TxBreak(USART_T* usart);

/** Smartcard mode */
void USART_ConfigGuardTime(USART_T* usart, uint8_t guardTime);
void USART_ConfigPrescaler(USART_T* usart, uint8_t div);
void USART_EnableSmartCard(USART_T* usart);
void USART_DisableSmartCard(USART_T* usart);
void USART_EnableSmartCardNACK(USART_T* usart);
void USART_DisableSmartCardNACK(USART_T* usart);

/** Half-duplex mode  */
void USART_EnableHalfDuplex(USART_T* usart);
void USART_DisableHalfDuplex(USART_T* usart);

/** IrDA mode */
void USART_ConfigIrDA(USART_T* usart, USART_IRDALP_T IrDAMode);
void USART_EnableIrDA(USART_T* usart);
void USART_DisableIrDA(USART_T* usart);

/** Interrupt and flag */
void USART_EnableInterrupt(USART_T* usart, USART_INT_T interrupt);
void USART_DisableInterrupt(USART_T* usart, USART_INT_T interrupt);
uint8_t USART_ReadStatusFlag(USART_T* usart, USART_FLAG_T flag);
void USART_ClearStatusFlag(USART_T* usart, USART_FLAG_T flag);
uint8_t USART_ReadIntFlag(USART_T* usart, USART_INT_T flag);
void USART_ClearIntFlag(USART_T* usart, USART_INT_T flag);

/**@} end of group USART_Fuctions*/
/**@} end of group USART_Driver*/
/**@} end of group Peripherals_Library*/

#ifdef __cplusplus
}
#endif

#endif /* __APM32F10X_USART_H */