rt-thread/bsp/apm32/libraries/APM32F10x_Library/APM32F10x_StdPeriphDriver/inc/apm32f10x_spi.h

/*!
 * @file        apm32f10x_spi.h
 *
 * @brief       This file contains all the functions prototypes for the SPI firmware library
 *
 * @version     V1.0.2
 *
 * @date        2022-01-05
 *
 * @attention
 *
 *  Copyright (C) 2020-2022 Geehy Semiconductor
 *
 *  You may not use this file except in compliance with the
 *  GEEHY COPYRIGHT NOTICE (GEEHY SOFTWARE PACKAGE LICENSE).
 *
 *  The program is only for reference, which is distributed in the hope
 *  that it will be usefull and instructional for customers to develop
 *  their software. Unless required by applicable law or agreed to in
 *  writing, the program is distributed on an "AS IS" BASIS, WITHOUT
 *  ANY WARRANTY OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the GEEHY SOFTWARE PACKAGE LICENSE for the governing permissions
 *  and limitations under the License.
 */

#ifndef __APM32F10X_SPI_H
#define __APM32F10X_SPI_H

#ifdef __cplusplus
  extern "C" {
#endif

#include "apm32f10x.h"

/** @addtogroup Peripherals_Library Standard Peripheral Library
  @{
*/

/** @addtogroup SPI_Driver SPI Driver
  @{
*/

/** @addtogroup SPI_Enumerations Enumerations
  @{
*/

/**
 * @brief   SPI data direction mode
 */
typedef enum
{
    SPI_DIRECTION_2LINES_FULLDUPLEX = 0x0000,
    SPI_DIRECTION_2LINES_RXONLY     = 0x0400,
    SPI_DIRECTION_1LINE_RX          = 0x8000,
    SPI_DIRECTION_1LINE_TX          = 0xC000
}SPI_DIRECTION_T;

/**
 * @brief    SPI mode
 */
typedef enum
{
    SPI_MODE_MASTER = 0x0104,
    SPI_MODE_SLAVE  = 0x0000
}SPI_MODE_T;

/**
 * @brief    SPI Data length
 */
typedef enum
{
    SPI_DATA_LENGTH_16B = 0x0800,
    SPI_DATA_LENGTH_8B  = 0x0000
}SPI_DATA_LENGTH_T;

/**
 * @brief    SPI Clock Polarity
 */
typedef enum
{
    SPI_CLKPOL_LOW   = 0x0000,
    SPI_CLKPOL_HIGH  = 0x0002
}SPI_CLKPOL_T;

/**
 * @brief    SPI Clock Phase
 */
typedef enum
{
    SPI_CLKPHA_1EDGE = 0x0000,
    SPI_CLKPHA_2EDGE = 0x0001
}SPI_CLKPHA_T;

/**
 * @brief    SPI Slave Select management
 */
typedef enum
{
    SPI_NSS_SOFT = 0x0200,
    SPI_NSS_HARD = 0x0000
}SPI_NSS_T;

/**
 * @brief    SPI BaudRate Prescaler
 */
typedef enum
{
    SPI_BAUDRATE_DIV_2   = 0x0000,
    SPI_BAUDRATE_DIV_4   = 0x0008,
    SPI_BAUDRATE_DIV_8   = 0x0010,
    SPI_BAUDRATE_DIV_16  = 0x0018,
    SPI_BAUDRATE_DIV_32  = 0x0020,
    SPI_BAUDRATE_DIV_64  = 0x0028,
    SPI_BAUDRATE_DIV_128 = 0x0030,
    SPI_BAUDRATE_DIV_256 = 0x0038,
}SPI_BAUDRATE_DIV_T;

/**
 * @brief    SPI MSB LSB transmission
 */
typedef enum
{
    SPI_FIRSTBIT_MSB = 0x0000,
    SPI_FIRSTBIT_LSB = 0x0080
}SPI_FIRSTBIT_T;

/**
 * @brief    I2S Mode
 */
typedef enum
{
    I2S_MODE_SLAVE_TX  = 0x0000,
    I2S_MODE_SLAVE_RX  = 0x0100,
    I2S_MODE_MASTER_TX = 0x0200,
    I2S_MODE_MASTER_RX = 0x0300
}I2S_MODE_T;

/**
 * @brief    I2S Standard
 */
typedef enum
{
    I2S_STANDARD_PHILLIPS = 0x0000,
    I2S_STANDARD_MSB      = 0x0010,
    I2S_STANDARD_LSB      = 0x0020,
    I2S_STANDARD_PCMSHORT = 0x0030,
    I2S_STANDARD_PCMLONG  = 0x00B0
}I2S_STANDARD_T;

/**
 * @brief   I2S data length
 */
typedef enum
{
    I2S_DATA_LENGHT_16B   =  0x0000,
    I2S_DATA_LENGHT_16BEX =  0x0001,
    I2S_DATA_LENGHT_24B   =  0x0003,
    I2S_DATA_LENGHT_32B   =  0x0005,
} I2S_DATA_LENGTH_T;

/**
 * @brief    I2S_MCLK_Output
 */
typedef enum
{
    I2S_MCLK_OUTPUT_DISABLE = 0x0000,
    I2S_MCLK_OUTPUT_ENABLE  = 0x0200,
}I2S_MCLK_OUTPUT_T;

/**
 * @brief    I2S Audio divider
 */
typedef enum
{
    I2S_AUDIO_DIV_192K    = 192000,
    I2S_AUDIO_DIV_96K     = 96000,
    I2S_AUDIO_DIV_48K     = 48000,
    I2S_AUDIO_DIV_44K     = 44100,
    I2S_AUDIO_DIV_32K     = 32000,
    I2S_AUDIO_DIV_22K     = 22050,
    I2S_AUDIO_DIV_16K     = 16000,
    I2S_AUDIO_DIV_11K     = 11025,
    I2S_AUDIO_DIV_8K      = 8000,
    I2S_AUDIO_DIV_DEFAULT = 2
}I2S_AUDIO_DIV_T;

/**
 * @brief    I2S Clock Polarity
 */
typedef enum
{
    I2S_CLKPOL_LOW      = 0x0000,
    I2S_CLKPOL_HIGH     = 0x0008
}I2S_CLKPOL_T;

/**
 * @brief    SPI Direction select
 */
typedef enum
{
    SPI_DIRECTION_RX    = 0xBFFF,
    SPI_DIRECTION_TX    = 0x4000
}SPI_DIRECTION_SELECT_T;

/**
 * @brief    SPI interrupts definition
 */
typedef enum
{
    SPI_I2S_INT_TXBE    = 0x8002,
    SPI_I2S_INT_RXBNE   = 0x4001,
    SPI_I2S_INT_ERR     = 0x2000,
    SPI_I2S_INT_OVR     = 0x2040,
    SPI_INT_CRCE        = 0x2010,
    SPI_INT_ME          = 0x2020,
    I2S_INT_UDR         = 0x2008
}SPI_I2S_INT_T;

/**
 * @brief    SPI flags definition
 */
typedef enum
{
    SPI_FLAG_RXBNE      = 0x0001,
    SPI_FLAG_TXBE       = 0x0002,
    I2S_FLAG_SCHDIR     = 0x0004,
    I2S_FLAG_UDR        = 0x0008,
    SPI_FLAG_CRCE       = 0x0010,
    SPI_FLAG_ME         = 0x0020,
    SPI_FLAG_OVR        = 0x0040,
    SPI_FLAG_BSY        = 0x0080
}SPI_FLAG_T;

/**
 * @brief    SPI I2S DMA requests
 */
typedef enum
{
    SPI_I2S_DMA_REQ_TX  = 0x0002,
    SPI_I2S_DMA_REQ_RX  = 0x0001
}SPI_I2S_DMA_REQ_T;

/**@} end of group SPI_Enumerations*/


/** @addtogroup SPI_Structure Data Structure
  @{
*/

/**
 * @brief    SPI Config structure definition
 */
typedef struct
{
    SPI_MODE_T          mode;
    SPI_DATA_LENGTH_T   length;
    SPI_CLKPHA_T        phase;
    SPI_CLKPOL_T        polarity;
    SPI_NSS_T           nss;
    SPI_FIRSTBIT_T      firstBit;
    SPI_DIRECTION_T     direction;
    SPI_BAUDRATE_DIV_T  baudrateDiv;
    uint16_t            crcPolynomial;
}SPI_Config_T;

/**
 * @brief    I2S Config structure definition
 */
typedef struct
{
    I2S_MODE_T          mode;
    I2S_STANDARD_T      standard;
    I2S_DATA_LENGTH_T   length;
    I2S_MCLK_OUTPUT_T   MCLKOutput;
    I2S_AUDIO_DIV_T     audioDiv;
    I2S_CLKPOL_T        polarity;
}I2S_Config_T;

/**@} end of group SPI_Structure*/

/** @addtogroup SPI_Fuctions Fuctions
  @{
*/

/** Reset and Configuration */
void SPI_I2S_Reset(SPI_T* spi);
void SPI_Config(SPI_T* spi, SPI_Config_T* spiConfig);
void I2S_Config(SPI_T* spi, I2S_Config_T* i2sConfig);
void SPI_ConfigStructInit(SPI_Config_T* spiConfig);
void I2S_ConfigStructInit(I2S_Config_T* i2sConfig);
void SPI_Enable(SPI_T* spi);
void SPI_Disable(SPI_T* spi);
void I2S_Enable(SPI_T* spi);
void I2S_Disable(SPI_T* spi);

void SPI_I2S_TxData(SPI_T* spi, uint16_t data);
uint16_t SPI_I2S_RxData(SPI_T* spi);
void SPI_SetSoftwareNSS(SPI_T* spi);
void SPI_ResetSoftwareNSS(SPI_T* spi);
void SPI_EnableSSOutput(SPI_T* spi);
void SPI_DisableSSOutput(SPI_T* spi);
void SPI_ConfigDataSize(SPI_T* spi, SPI_DATA_LENGTH_T length);

/** DMA */
void SPI_I2S_EnableDMA(SPI_T* spi, SPI_I2S_DMA_REQ_T dmaReq);
void SPI_I2S_DisableDMA(SPI_T* spi, SPI_I2S_DMA_REQ_T dmaReq);

/** CRC */
void SPI_TxCRC(SPI_T* spi);
void SPI_EnableCRC(SPI_T* spi);
void SPI_DisableCRC(SPI_T* spi);
uint16_t SPI_ReadTxCRC(SPI_T* spi);
uint16_t SPI_ReadRxCRC(SPI_T* spi);
uint16_t SPI_ReadCRCPolynomial(SPI_T* spi);
void SPI_ConfigBiDirectionalLine(SPI_T* spi, SPI_DIRECTION_SELECT_T direction);

/** Interrupts and flag */
void SPI_I2S_EnableInterrupt(SPI_T* spi, SPI_I2S_INT_T interrupt);
void SPI_I2S_DisableInterrupt(SPI_T* spi, SPI_I2S_INT_T interrupt);
uint8_t SPI_I2S_ReadStatusFlag(SPI_T* spi, SPI_FLAG_T flag);
void SPI_I2S_ClearStatusFlag(SPI_T* spi, SPI_FLAG_T flag);
uint8_t SPI_I2S_ReadIntFlag(SPI_T* spi, SPI_I2S_INT_T flag);
void SPI_I2S_ClearIntFlag(SPI_T* spi, SPI_I2S_INT_T flag);

/**@} end of group SPI_Fuctions*/
/**@} end of group SPI_Driver*/
/**@} end of group Peripherals_Library*/

#ifdef __cplusplus
}
#endif

#endif /* __APM32F10X_SPI_H */