| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253 |
- #ifndef __SWM341_I2C_H__
- #define __SWM341_I2C_H__
- typedef struct {
- uint8_t Master; //1 主机模式 0 从机模式
- uint32_t MstClk; //主机传输时钟频率
- uint8_t Addr10b; //1 10位地址模式 0 7位地址模式
- uint16_t SlvAddr; //从机地址
- uint16_t SlvAddrMsk;
- uint8_t TXEmptyIEn; //发送寄存器空中断使能
- uint8_t RXNotEmptyIEn; //接收寄存器非空中断使能
- uint8_t SlvSTADetIEn; //从机检测到起始中断使能
- uint8_t SlvSTODetIEn; //从机检测到终止中断使能
- } I2C_InitStructure;
- /* Interrupt Type */
- #define I2C_IT_TX_EMPTY (1 << 0) //TX FIFO Empty
- #define I2C_IT_RX_NOT_EMPTY (1 << 1) //RX FIFO Not Empty
- #define I2C_IT_RX_OVF (1 << 2) //RX FIFO Overflow
- #define I2C_IT_TX_DONE (1 << 3) //发送完成（接收到ACK）
- #define I2C_IT_RX_DONE (1 << 4) //接收完成（发送出ACK）
- #define I2C_IT_SLV_DET_STA (1 << 8) //从机检测到起始位
- #define I2C_IT_SLV_DET_STP (1 << 9) //从机检测到停止位
- #define I2C_IT_ARB_LOST (1 << 16) //主机Arbitration lost
- #define I2C_IT_SCL_LOW_TO (1 << 17) //主机SCL Low Timeout
- void I2C_Init(I2C_TypeDef * I2Cx, I2C_InitStructure * initStruct);
- void I2C_Open(I2C_TypeDef * I2Cx);
- void I2C_Close(I2C_TypeDef * I2Cx);
- uint8_t I2C_Start(I2C_TypeDef * I2Cx, uint8_t addr, uint8_t wait);
- void I2C_Stop(I2C_TypeDef * I2Cx, uint8_t wait);
- uint8_t I2C_Write(I2C_TypeDef * I2Cx, uint8_t data, uint8_t wait);
- uint8_t I2C_Read(I2C_TypeDef * I2Cx, uint8_t ack, uint8_t wait);
- uint8_t I2C_StartDone(I2C_TypeDef * I2Cx);
- uint8_t I2C_StopDone(I2C_TypeDef * I2Cx);
- uint8_t I2C_WriteDone(I2C_TypeDef * I2Cx);
- uint8_t I2C_ReadDone(I2C_TypeDef * I2Cx);
- uint8_t I2C_IsAck(I2C_TypeDef * I2Cx);
- void I2C_INTEn(I2C_TypeDef * I2Cx, uint32_t it); //中断使能
- void I2C_INTDis(I2C_TypeDef * I2Cx, uint32_t it); //中断禁止
- void I2C_INTClr(I2C_TypeDef * I2Cx, uint32_t it); //中断标志清除
- uint32_t I2C_INTStat(I2C_TypeDef * I2Cx, uint32_t it); //中断状态查询
- #endif //__SWM341_I2C_H__
|
