rt-thread/bsp/x86/drivers/include/bsp.h

/*
 * Copyright (c) 2006-2021, RT-Thread Development Team
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Change Logs:
 * Date           Author       Notes
 * 2006-09-15     QiuYi        the first version */

#ifndef __BSP_H_
#define __BSP_H_

#include <i386.h>

#ifdef __cplusplus
extern "C" {
#endif
 
/*******************************************************************/
/*  Timer Register  */
/*******************************************************************/
#define TIMER_CNTR0			(IO_TIMER1 + 0)	/* timer 0 counter port */
#define TIMER_CNTR1			(IO_TIMER1 + 1)	/* timer 1 counter port */
#define TIMER_CNTR2			(IO_TIMER1 + 2)	/* timer 2 counter port */
#define TIMER_MODE			(IO_TIMER1 + 3)	/* timer mode port */
#define TIMER_SEL0			0x00	/* select counter 0 */
#define TIMER_SEL1			0x40	/* select counter 1 */
#define TIMER_INTTC			0x00	/* mode 0, intr on terminal cnt */
#define TIMER_ONESHOT		0x02	/* mode 1, one shot */
#define TIMER_RATEGEN		0x04	/* mode 2, rate generator */
#define TIMER_SQWAVE		0x06	/* mode 3, square wave */
#define TIMER_SWSTROBE		0x08	/* mode 4, s/w triggered strobe */
#define TIMER_HWSTROBE		0x0a	/* mode 5, h/w triggered strobe */
#define TIMER_LATCH			0x00	/* latch counter for reading */
#define TIMER_LSB			0x10	/* r/w counter LSB */
#define TIMER_MSB			0x20	/* r/w counter MSB */
#define TIMER_16BIT			0x30	/* r/w counter 16 bits, LSB first */
#define TIMER_BCD			0x01	/* count in BCD */

#define TIMER_FREQ			1193182
#define TIMER_DIV(x)		((TIMER_FREQ+(x)/2)/(x))

#define IO_TIMER1			0x040	/* 8253 Timer #1 */

/*******************************************************************/
/* Interrupt Controller */
/*******************************************************************/
/* these are processor defined */
#define T_DIVIDE			0		/* divide error */
#define T_DEBUG	 			1		/* debug exception */
#define T_NMI				2		/* non-maskable interrupt */
#define T_BRKPT	 			3		/* breakpoint */
#define T_OFLOW				4		/* overflow */
#define T_BOUND	  			5		/* bounds check */
#define T_ILLOP	  			6		/* illegal opcode */
#define T_DEVICE	 		7		/* device not available */
#define T_DBLFLT	 		8		/* double fault */
/* 9 is reserved */
#define T_TSS			10		/* invalid task switch segment */
#define T_SEGNP			11		/* segment not present */
#define T_STACK	 		12		/* stack exception */
#define T_GPFLT			13		/* genernal protection fault */
#define T_PGFLT			14		/* page fault */
/* 15 is reserved */
#define T_FPERR	 		16		/* floating point error */
#define T_ALIGN			17		/* aligment check */
#define T_MCHK			18		/* machine check */
#define T_DEFAULT		500		/* catchall */

#define INTTIMER0		0
#define INTKEYBOARD		1
#define INTUART0_RX		4
#define	CLOCK_IRQ		0
#define	KEYBOARD_IRQ	1
#define	CASCADE_IRQ		2	/* cascade enable for 2nd AT controller */
#define	ETHER_IRQ		3	/* default ethernet interrupt vector */
#define	SECONDARY_IRQ	3	/* RS232 interrupt vector for port 2 */
#define	RS232_IRQ		4	/* RS232 interrupt vector for port 1 */
#define	XT_WINI_IRQ		5	/* xt winchester */
#define	FLOPPY_IRQ		6	/* floppy disk */
#define	PRINTER_IRQ		7
#define	AT_WINI_IRQ		14	/* at winchester */
/* I/O Addresses of the two 8259A programmable interrupt controllers */
#define IO_PIC1 		0x20 	/* Master(IRQs 0-7) */
#define IO_PIC2 		0xa0	/* Slave(IRQs 8-15) */
#define IRQ_SLAVE 		0x2		/* IRQ at which slave connects to master */
#define IRQ_OFFSET 		0x20	/* IRQ 0 corresponds to int IRQ_OFFSET */

#define MAX_HANDLERS	16		/*max number of isr handler*/

/*******************************************************************/
/* CRT Register */
/*******************************************************************/
#define MONO_BASE		0x3b4
#define MONO_BUF		0xb0000
#define CGA_BASE		0x3d4
#define CGA_BUF			0xb8000

#define CRT_ROWS		25
#define CRT_COLS		80
#define CRT_SIZE		(CRT_ROWS * CRT_COLS)

/*******************************************************************/
/* Keyboard Register */
/*******************************************************************/
#define	KBSTATP			0x64	/* kbd controller status port(I) */
#define	KBS_DIB			0x01	/* kbd data in buffer */
#define	KBDATAP			0x60	/* kbd data port(I) */
/* AT keyboard */
/* 8042 ports */
#define	KB_DATA			0x60	/* I/O port for keyboard data
                                 * Read : Read Output Buffer 
                                 * Write: Write Input Buffer(8042 Data&8048 Command) */
#define	KB_CMD			0x64	/* I/O port for keyboard command
                                 * Read : Read Status Register
                                 * Write: Write Input Buffer(8042 Command) */
#define	LED_CODE		0xED
#define	KB_ACK			0xFA

/*******************************************************************/
/* Serial Register */
/*******************************************************************/
/*Serial I/O code */
#define COM1			0x3F8
#define COMSTATUS		5
#define COMDATA			0x01
#define COMREAD			0
#define COMWRITE		0

/* Bits definition of the Line Status Register (LSR)*/
#define DR				0x01	/* Data Ready */
#define OE				0x02	/* Overrun Error */
#define PE				0x04	/* Parity Error */
#define FE				0x08	/* Framing Error */
#define BI				0x10	/* Break Interrupt */
#define THRE			0x20	/* Transmitter Holding Register Empty */
#define TEMT			0x40	/* Transmitter Empty */
#define ERFIFO			0x80	/* Error receive Fifo */

#ifdef __cplusplus
}
#endif

#endif /* __BSP_H_ */