123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229 |
- /**
- * \file
- *
- * \brief In System Programming API
- *
- * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. The name of Atmel may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * 4. This software may only be redistributed and used in connection with an
- * Atmel microcontroller product.
- *
- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * \asf_license_stop
- *
- */
- /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
- */
- #ifndef _ISP_H_
- #define _ISP_H_
- #include "conf_isp.h"
- #ifdef __cplusplus
- extern "C" {
- #endif
- /**
- * \defgroup isp In System Programming API
- *
- * @{
- */
- /**
- * \name Main In System Programming functions
- * @{
- */
- /**
- * \brief Initializes the ISP interface
- *
- * Example, load the JTAG ID in signature memory
- */
- void isp_init(void);
- /**
- * \brief Gives the security state of the chip
- *
- * \return \c 1 if chip is secured, otherwise \c 0.
- */
- bool isp_is_security(void);
- /**
- * \brief Change the boot process configuration
- * to enable/disable the ISP mode for the next startup.
- *
- * \param force Enable the ISP mode for the next startup if true
- */
- void isp_force_boot_isp(bool force);
- /**
- * \brief Erase the application flash area and eventually the eeprom
- *
- * \return \c 1 if function was successfully done, otherwise \c 0.
- */
- bool isp_erase_chip(void);
- /**
- * \brief Erase a part of the application flash area
- * This function must be called again as long as it returns 0.
- *
- * \return \c 1 if the whole application flash area is erased, otherwise it is
- * not finished.
- *
- * This function has been created to split a long erase so that
- * the ISP application is able to answer external pending requests.
- */
- bool isp_erase_chip_split(void);
- /**
- * \brief Resets the device to start the user application
- *
- * The ISP mode must be disabled before (See isp_force_boot_isp(false))
- * to allow the boot process to jump to the user application.
- *
- * \note: this function is usually implemented by using a watchdog reset
- * or a software reset to restart the CPU.
- */
- void isp_start_appli(void);
- //! @}
- //! Data type for holding flash memory addresses
- #ifdef ISP_SMALL_MEMORY_SIZE
- typedef uint16_t isp_addr_t;
- #else
- typedef uint32_t isp_addr_t;
- #endif
- //! Memory API definition
- typedef struct {
- //! Size of the memory (unit Byte)
- uint32_t size;
- //! Function to read memory
- void (*fnct_read) (void *dst, isp_addr_t src, uint16_t nbytes);
- //! Function to write memory
- void (*fnct_write) (isp_addr_t dst, const void *src, uint16_t nbytes);
- } isp_mem_t;
- /**
- * \name Memory units index values
- * Used to access at a memory through \ref isp_memories list.
- * @{
- */
- #define ISP_MEM_FLASH 0x00
- #define ISP_MEM_EEPROM 0x01
- #define ISP_MEM_SECURITY 0x02
- #define ISP_MEM_CONFIGURATION 0x03
- #define ISP_MEM_BOOTLOADER 0x04
- #define ISP_MEM_SIGNATURE 0x05
- #define ISP_MEM_USER 0x06
- #define ISP_MEM_INT_RAM 0x07
- #define ISP_MEM_EXT_MEM_CS0 0x08
- #define ISP_MEM_EXT_MEM_CS1 0x09
- #define ISP_MEM_EXT_MEM_CS2 0x0A
- #define ISP_MEM_EXT_MEM_CS3 0x0B
- #define ISP_MEM_EXT_MEM_CS4 0x0C
- #define ISP_MEM_EXT_MEM_CS5 0x0D
- #define ISP_MEM_EXT_MEM_CS6 0x0E
- #define ISP_MEM_EXT_MEM_CS7 0x0F
- #define ISP_MEM_EXT_MEM_DF 0x10
- #define ISP_MEM_COUNT 0x11 // Number of memory units
- //! @}
- //! Memories list structure
- typedef union {
- isp_mem_t const *mem[ISP_MEM_COUNT];
- struct {
- isp_mem_t const *flash;
- isp_mem_t const *eeprom;
- isp_mem_t const *security;
- isp_mem_t const *conf;
- isp_mem_t const *bootloader;
- isp_mem_t const *signature;
- isp_mem_t const *user;
- isp_mem_t const *int_ram;
- isp_mem_t const *ext_mem_cs0;
- isp_mem_t const *ext_mem_cs1;
- isp_mem_t const *ext_mem_cs2;
- isp_mem_t const *ext_mem_cs3;
- isp_mem_t const *ext_mem_cs4;
- isp_mem_t const *ext_mem_cs5;
- isp_mem_t const *ext_mem_cs6;
- isp_mem_t const *ext_mem_cs7;
- isp_mem_t const *ext_mem_df;
- }list;
- } isp_mems_t;
- //! Memories list declaration
- extern const isp_mems_t isp_memories;
- COMPILER_PACK_SET(1) // alignment requested to simulate a memory
- //! Memory signature structure to store JTAG ID
- typedef union {
- uint8_t mem[4];
- struct {
- uint8_t manufacture;
- uint8_t product_number_msb;
- uint8_t product_number_lsb;
- uint8_t product_revision;
- };
- } isp_mem_signature_t;
- /**
- * Memory bootloader structure
- *
- * In the FLIP protocol, this structure is used to store medium
- * and minor bootloader versions:
- * - Example, Version 0x00 give 1.0.0 on batchisp log
- * - Example, Version 0x03 give 1.0.3 on batchisp log
- * - Example, Version 0x25 give 1.2.5 on batchisp log
- * - id1 & id2 are not used and must always be 0.
- */
- typedef struct {
- uint8_t version;
- uint8_t id1;
- uint8_t id2;
- } isp_mem_bootloader_t;
- COMPILER_PACK_RESET()
- //! @}
- #ifdef __cplusplus
- }
- #endif
- #endif // _ISP_H_
|