rt-thread/bsp/stm32/stm32h503-st-nucleo/board/CubeMX_Config/Inc/stm32h5xx_hal_conf.h

/* USER CODE BEGIN Header */
/**
  **********************************************************************************************************************

  * @file    stm32h5xx_hal_conf.h
  * @author  MCD Application Team
  * @brief   HAL configuration file.
  **********************************************************************************************************************

  * @attention
  *
  * Copyright (c) 2022 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  **********************************************************************************************************************

  */
/* USER CODE END Header */

/* Define to prevent recursive inclusion -----------------------------------------------------------------------------*/

#ifndef STM32H5xx_HAL_CONF_H
#define STM32H5xx_HAL_CONF_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Exported types ----------------------------------------------------------------------------------------------------*/
/* Exported constants ------------------------------------------------------------------------------------------------*/

/* ########################################### Module Selection ##################################################### */

/**
  * @brief This is the list of modules to be used in the HAL driver
  */

#define HAL_MODULE_ENABLED

/*#define HAL_ADC_MODULE_ENABLED */
/*#define HAL_CEC_MODULE_ENABLED */
/*#define HAL_COMP_MODULE_ENABLED */
/*#define HAL_CORDIC_MODULE_ENABLED */
/*#define HAL_CRC_MODULE_ENABLED */
/*#define HAL_CRYP_MODULE_ENABLED */
/*#define HAL_DAC_MODULE_ENABLED */
/*#define HAL_DCACHE_MODULE_ENABLED */
/*#define HAL_DCMI_MODULE_ENABLED */
/*#define HAL_DTS_MODULE_ENABLED */
/*#define HAL_ETH_MODULE_ENABLED */
/*#define HAL_FDCAN_MODULE_ENABLED */
/*#define HAL_FMAC_MODULE_ENABLED */
/*#define HAL_GTZC_MODULE_ENABLED */
/*#define HAL_HASH_MODULE_ENABLED */
/*#define HAL_HCD_MODULE_ENABLED */
/*#define HAL_IRDA_MODULE_ENABLED */
/*#define HAL_IWDG_MODULE_ENABLED */
/*#define HAL_I2C_MODULE_ENABLED */
/*#define HAL_I3C_MODULE_ENABLED */
/*#define HAL_I2S_MODULE_ENABLED */
/*#define HAL_LPTIM_MODULE_ENABLED */
/*#define HAL_NAND_MODULE_ENABLED */
/*#define HAL_NOR_MODULE_ENABLED */
/*#define HAL_OPAMP_MODULE_ENABLED */
/*#define HAL_XSPI_MODULE_ENABLED */
/*#define HAL_OTFDEC_MODULE_ENABLED */
/*#define HAL_PKA_MODULE_ENABLED */
/*#define HAL_RNG_MODULE_ENABLED */
/*#define HAL_RTC_MODULE_ENABLED */
/*#define HAL_SAI_MODULE_ENABLED */
/*#define HAL_SD_MODULE_ENABLED */
/*#define HAL_SDRAM_MODULE_ENABLED */
/*#define HAL_MMC_MODULE_ENABLED */
/*#define HAL_SMARTCARD_MODULE_ENABLED */
/*#define HAL_SMBUS_MODULE_ENABLED */
/*#define HAL_SPI_MODULE_ENABLED */
/*#define HAL_SRAM_MODULE_ENABLED */
/*#define HAL_TIM_MODULE_ENABLED */
/*#define HAL_RAMCFG_MODULE_ENABLED */
#define HAL_UART_MODULE_ENABLED
/*#define HAL_USART_MODULE_ENABLED */
/*#define HAL_WWDG_MODULE_ENABLED */
/*#define HAL_PSSI_MODULE_ENABLED */
#define HAL_ICACHE_MODULE_ENABLED
#define HAL_PCD_MODULE_ENABLED
#define HAL_GPIO_MODULE_ENABLED
#define HAL_EXTI_MODULE_ENABLED
#define HAL_DMA_MODULE_ENABLED
#define HAL_RCC_MODULE_ENABLED
#define HAL_FLASH_MODULE_ENABLED
#define HAL_PWR_MODULE_ENABLED
#define HAL_CORTEX_MODULE_ENABLED

/* ####################################### Oscillator Values adaptation ##############################################*/

/**
  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
  *        This value is used by the RCC HAL module to compute the system frequency
  *        (when HSE is used as system clock source, directly or through the PLL).
  */
#if !defined  (HSE_VALUE)
  #define HSE_VALUE    24000000U /*!< Value of the External oscillator in Hz */
#endif /* HSE_VALUE */

#if !defined  (HSE_STARTUP_TIMEOUT)
  #define HSE_STARTUP_TIMEOUT    100U   /*!< Time out for HSE start up, in ms */
#endif /* HSE_STARTUP_TIMEOUT */

/**
  * @brief Internal Core Speed oscillator (CSI) default value.
  *        This value is the default CSI range value after Reset.
  */
#if !defined  (CSI_VALUE)
  #define CSI_VALUE              4000000UL /*!< Value of the Internal oscillator in Hz*/
#endif /* CSI_VALUE */

/**
  * @brief Internal High Speed oscillator (HSI) value.
  *        This value is used by the RCC HAL module to compute the system frequency
  *        (when HSI is used as system clock source, directly or through the PLL).
  */
#if !defined  (HSI_VALUE)
  #define HSI_VALUE              64000000UL /*!< Value of the Internal oscillator in Hz*/
#endif /* HSI_VALUE */

/**
  * @brief Internal High Speed oscillator (HSI48) value for USB FS, SDMMC and RNG.
  *        This internal oscillator is mainly dedicated to provide a high precision clock to
  *        the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
  *        When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
  *        which is subject to manufacturing process variations.
  */
#if !defined  (HSI48_VALUE)
  #define HSI48_VALUE             48000000UL /*!< Value of the Internal High Speed oscillator for USB FS/SDMMC/RNG in Hz.
                                                  The real value my vary depending on manufacturing process variations.*/
#endif /* HSI48_VALUE */

/**
  * @brief Internal Low Speed oscillator (LSI) value.
  */
#if !defined  (LSI_VALUE)
  #define LSI_VALUE  32000UL    /*!< LSI Typical Value in Hz*/
#endif /* LSI_VALUE */                     /*!< Value of the Internal Low Speed oscillator in Hz
                                                The real value may vary depending on the variations
                                                in voltage and temperature.*/

#if !defined  (LSI_STARTUP_TIME)
  #define LSI_STARTUP_TIME          130UL      /*!< Time out for LSI start up, in ms */
#endif /* LSI_STARTUP_TIME */

/**
  * @brief External Low Speed oscillator (LSE) value.
  *        This value is used by the UART, RTC HAL module to compute the system frequency
  */
#if !defined  (LSE_VALUE)
  #define LSE_VALUE  32768UL    /*!< Value of the External oscillator in Hz*/
#endif /* LSE_VALUE */

#if !defined  (LSE_STARTUP_TIMEOUT)
  #define LSE_STARTUP_TIMEOUT    5000UL     /*!< Time out for LSE start up, in ms */
#endif /* LSE_STARTUP_TIMEOUT */

/**
  * @brief External clock source for SPI/SAI peripheral
  *        This value is used by the SPI/SAI HAL module to compute the SPI/SAI clock source
  *        frequency, this source is inserted directly through I2S_CKIN pad.

  */
#if !defined  (EXTERNAL_CLOCK_VALUE)
  #define EXTERNAL_CLOCK_VALUE    12288000UL /*!< Value of the External clock in Hz*/
#endif /* EXTERNAL_CLOCK_VALUE */

/* Tip: To avoid modifying this file each time you need to use different HSE,
   ===  you can define the HSE value in your toolchain compiler preprocessor. */

/* ############################################ System Configuration ################################################ */

/**
  * @brief This is the HAL system configuration section
  */

#define  VDD_VALUE                  3300UL /*!< Value of VDD in mv */
#define  TICK_INT_PRIORITY          (15UL)  /*!< tick interrupt priority (lowest by default) */
#define  USE_RTOS                   0U
#define  PREFETCH_ENABLE            0U               /*!< Enable prefetch */

/* ############################################ Assert Selection #################################################### */

/**
  * @brief Uncomment the line below to expanse the "assert_param" macro in the
  *        HAL drivers code
  */

/* #define USE_FULL_ASSERT    1U */

/* ############################################ Register callback feature configuration ############################# */

/**
  * @brief Set below the peripheral configuration  to "1U" to add the support
  *        of HAL callback registration/unregistration feature for the HAL
  *        driver(s). This allows user application to provide specific callback
  *        functions thanks to HAL_PPP_RegisterCallback() rather than overwriting
  *        the default weak callback functions (see each stm32h5xx_hal_ppp.h file
  *        for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef
  *        for each PPP peripheral).
  */
#define  USE_HAL_ADC_REGISTER_CALLBACKS       0U    /* ADC register callback disabled       */
#define  USE_HAL_CEC_REGISTER_CALLBACKS       0U    /* CEC register callback disabled       */
#define  USE_HAL_COMP_REGISTER_CALLBACKS      0U    /* COMP register callback disabled      */
#define  USE_HAL_CORDIC_REGISTER_CALLBACKS    0U    /* CORDIC register callback disabled    */
#define  USE_HAL_CRYP_REGISTER_CALLBACKS      0U    /* CRYP register callback disabled      */
#define  USE_HAL_DAC_REGISTER_CALLBACKS       0U    /* DAC register callback disabled       */
#define  USE_HAL_DCMI_REGISTER_CALLBACKS      0U    /* DCMI register callback disabled      */
#define  USE_HAL_DTS_REGISTER_CALLBACKS       0U    /* DTS register callback disabled       */
#define  USE_HAL_ETH_REGISTER_CALLBACKS       0U    /* ETH register callback disabled       */
#define  USE_HAL_FDCAN_REGISTER_CALLBACKS     0U    /* FDCAN register callback disabled     */
#define  USE_HAL_FMAC_REGISTER_CALLBACKS      0U    /* FMAC register callback disabled      */
#define  USE_HAL_NOR_REGISTER_CALLBACKS       0U    /* NOR register callback disabled       */
#define  USE_HAL_HASH_REGISTER_CALLBACKS      0U    /* HASH register callback disabled      */
#define  USE_HAL_HCD_REGISTER_CALLBACKS       0U    /* HCD register callback disabled       */
#define  USE_HAL_I2C_REGISTER_CALLBACKS       0U    /* I2C register callback disabled       */
#define  USE_HAL_I2S_REGISTER_CALLBACKS       0U    /* I2S register callback disabled       */
#define  USE_HAL_I3C_REGISTER_CALLBACKS       0U    /* I3C register callback disabled       */
#define  USE_HAL_IRDA_REGISTER_CALLBACKS      0U    /* IRDA register callback disabled      */
#define  USE_HAL_IWDG_REGISTER_CALLBACKS      0U    /* IWDG register callback disabled      */
#define  USE_HAL_LPTIM_REGISTER_CALLBACKS     0U    /* LPTIM register callback disabled     */
#define  USE_HAL_MMC_REGISTER_CALLBACKS       0U    /* MMC register callback disabled       */
#define  USE_HAL_NAND_REGISTER_CALLBACKS      0U    /* NAND register callback disabled      */

#define  USE_HAL_OPAMP_REGISTER_CALLBACKS     0U    /* OTFDEC register callback disabled    */
#define  USE_HAL_OTFDEC_REGISTER_CALLBACKS    0U    /* OPAMP register callback disabled     */
#define  USE_HAL_PCD_REGISTER_CALLBACKS       0U    /* PCD register callback disabled       */
#define  USE_HAL_PKA_REGISTER_CALLBACKS       0U    /* PKA register callback disabled       */
#define  USE_HAL_RAMCFG_REGISTER_CALLBACKS    0U    /* RAMCFG register callback disabled    */
#define  USE_HAL_RNG_REGISTER_CALLBACKS       0U    /* RNG register callback disabled       */
#define  USE_HAL_RTC_REGISTER_CALLBACKS       0U    /* RTC register callback disabled       */
#define  USE_HAL_SAI_REGISTER_CALLBACKS       0U    /* SAI register callback disabled       */
#define  USE_HAL_SD_REGISTER_CALLBACKS        0U    /* SD register callback disabled        */
#define  USE_HAL_SDRAM_REGISTER_CALLBACKS     0U    /* SDRAM register callback disabled     */
#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U    /* SMARTCARD register callback disabled */
#define  USE_HAL_SMBUS_REGISTER_CALLBACKS     0U    /* SMBUS register callback disabled     */
#define  USE_HAL_SPI_REGISTER_CALLBACKS       0U    /* SPI register callback disabled       */
#define  USE_HAL_SRAM_REGISTER_CALLBACKS      0U    /* SRAM register callback disabled      */
#define  USE_HAL_TIM_REGISTER_CALLBACKS       0U    /* TIM register callback disabled       */
#define  USE_HAL_UART_REGISTER_CALLBACKS      0U    /* UART register callback disabled      */
#define  USE_HAL_USART_REGISTER_CALLBACKS     0U    /* USART register callback disabled     */
#define  USE_HAL_WWDG_REGISTER_CALLBACKS      0U    /* WWDG register callback disabled      */
#define  USE_HAL_XSPI_REGISTER_CALLBACKS      0U    /* XSPI register callback disabled      */

/* ############################################ SPI peripheral configuration ######################################## */

/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
 * Activated: CRC code is present inside driver
 * Deactivated: CRC code cleaned from driver
 */
#define USE_SPI_CRC                   0U

/* Includes ----------------------------------------------------------------------------------------------------------*/

/**
  * @brief Include module's header file
  */

#ifdef HAL_RCC_MODULE_ENABLED
  #include "stm32h5xx_hal_rcc.h"
#endif /* HAL_RCC_MODULE_ENABLED */

#ifdef HAL_GPIO_MODULE_ENABLED
  #include "stm32h5xx_hal_gpio.h"
#endif /* HAL_GPIO_MODULE_ENABLED */

#ifdef HAL_ICACHE_MODULE_ENABLED
  #include "stm32h5xx_hal_icache.h"
#endif /* HAL_ICACHE_MODULE_ENABLED */

#ifdef HAL_DCACHE_MODULE_ENABLED
  #include "stm32h5xx_hal_dcache.h"
#endif /* HAL_DCACHE_MODULE_ENABLED */

#ifdef HAL_GTZC_MODULE_ENABLED
  #include "stm32h5xx_hal_gtzc.h"
#endif /* HAL_GTZC_MODULE_ENABLED */

#ifdef HAL_DMA_MODULE_ENABLED
  #include "stm32h5xx_hal_dma.h"
#endif /* HAL_DMA_MODULE_ENABLED */

#ifdef HAL_DTS_MODULE_ENABLED
  #include "stm32h5xx_hal_dts.h"
#endif /* HAL_DTS_MODULE_ENABLED */

#ifdef HAL_CORTEX_MODULE_ENABLED
  #include "stm32h5xx_hal_cortex.h"
#endif /* HAL_CORTEX_MODULE_ENABLED */

#ifdef HAL_PKA_MODULE_ENABLED
  #include "stm32h5xx_hal_pka.h"
#endif /* HAL_PKA_MODULE_ENABLED */

#ifdef HAL_ADC_MODULE_ENABLED
  #include "stm32h5xx_hal_adc.h"
#endif /* HAL_ADC_MODULE_ENABLED */

#ifdef HAL_CRC_MODULE_ENABLED
  #include "stm32h5xx_hal_crc.h"
#endif /* HAL_CRC_MODULE_ENABLED */

#ifdef HAL_CRYP_MODULE_ENABLED
  #include "stm32h5xx_hal_cryp.h"
#endif /* HAL_CRYP_MODULE_ENABLED */

#ifdef HAL_DAC_MODULE_ENABLED
  #include "stm32h5xx_hal_dac.h"
#endif /* HAL_DAC_MODULE_ENABLED */

#ifdef HAL_FLASH_MODULE_ENABLED
  #include "stm32h5xx_hal_flash.h"
#endif /* HAL_FLASH_MODULE_ENABLED */

#ifdef HAL_HASH_MODULE_ENABLED
  #include "stm32h5xx_hal_hash.h"
#endif /* HAL_HASH_MODULE_ENABLED */

#ifdef HAL_SRAM_MODULE_ENABLED
  #include "stm32h5xx_hal_sram.h"
#endif /* HAL_SRAM_MODULE_ENABLED */

#ifdef HAL_SDRAM_MODULE_ENABLED
  #include "stm32h5xx_hal_sdram.h"
#endif /* HAL_SDRAM_MODULE_ENABLED */

#ifdef HAL_MMC_MODULE_ENABLED
 #include "stm32h5xx_hal_mmc.h"
#endif /* HAL_MMC_MODULE_ENABLED */

#ifdef HAL_NOR_MODULE_ENABLED
  #include "stm32h5xx_hal_nor.h"
#endif /* HAL_NOR_MODULE_ENABLED */

#ifdef HAL_NAND_MODULE_ENABLED
  #include "stm32h5xx_hal_nand.h"
#endif /* HAL_NAND_MODULE_ENABLED */

#ifdef HAL_I2C_MODULE_ENABLED
 #include "stm32h5xx_hal_i2c.h"
#endif /* HAL_I2C_MODULE_ENABLED */

#ifdef HAL_I2S_MODULE_ENABLED
 #include "stm32h5xx_hal_i2s.h"
#endif /* HAL_I2S_MODULE_ENABLED */

#ifdef HAL_I3C_MODULE_ENABLED
 #include "stm32h5xx_hal_i3c.h"
#endif /* HAL_I3C_MODULE_ENABLED */

#ifdef HAL_IWDG_MODULE_ENABLED
 #include "stm32h5xx_hal_iwdg.h"
#endif /* HAL_IWDG_MODULE_ENABLED */

#ifdef HAL_LPTIM_MODULE_ENABLED
#include "stm32h5xx_hal_lptim.h"
#endif /* HAL_LPTIM_MODULE_ENABLED */

#ifdef HAL_PWR_MODULE_ENABLED
 #include "stm32h5xx_hal_pwr.h"
#endif /* HAL_PWR_MODULE_ENABLED */

#ifdef HAL_XSPI_MODULE_ENABLED
 #include "stm32h5xx_hal_xspi.h"
#endif /* HAL_XSPI_MODULE_ENABLED */

#ifdef HAL_RNG_MODULE_ENABLED
 #include "stm32h5xx_hal_rng.h"
#endif /* HAL_RNG_MODULE_ENABLED */

#ifdef HAL_RTC_MODULE_ENABLED
 #include "stm32h5xx_hal_rtc.h"
#endif /* HAL_RTC_MODULE_ENABLED */

#ifdef HAL_SAI_MODULE_ENABLED
 #include "stm32h5xx_hal_sai.h"
#endif /* HAL_SAI_MODULE_ENABLED */

#ifdef HAL_SD_MODULE_ENABLED
 #include "stm32h5xx_hal_sd.h"
#endif /* HAL_SD_MODULE_ENABLED */

#ifdef HAL_SMBUS_MODULE_ENABLED
 #include "stm32h5xx_hal_smbus.h"
#endif /* HAL_SMBUS_MODULE_ENABLED */

#ifdef HAL_SPI_MODULE_ENABLED
 #include "stm32h5xx_hal_spi.h"
#endif /* HAL_SPI_MODULE_ENABLED */

#ifdef HAL_TIM_MODULE_ENABLED
 #include "stm32h5xx_hal_tim.h"
#endif /* HAL_TIM_MODULE_ENABLED */

#ifdef HAL_UART_MODULE_ENABLED
 #include "stm32h5xx_hal_uart.h"
#endif /* HAL_UART_MODULE_ENABLED */

#ifdef HAL_USART_MODULE_ENABLED
 #include "stm32h5xx_hal_usart.h"
#endif /* HAL_USART_MODULE_ENABLED */

#ifdef HAL_IRDA_MODULE_ENABLED
 #include "stm32h5xx_hal_irda.h"
#endif /* HAL_IRDA_MODULE_ENABLED */

#ifdef HAL_SMARTCARD_MODULE_ENABLED
 #include "stm32h5xx_hal_smartcard.h"
#endif /* HAL_SMARTCARD_MODULE_ENABLED */

#ifdef HAL_WWDG_MODULE_ENABLED
 #include "stm32h5xx_hal_wwdg.h"
#endif /* HAL_WWDG_MODULE_ENABLED */

#ifdef HAL_PCD_MODULE_ENABLED
 #include "stm32h5xx_hal_pcd.h"
#endif /* HAL_PCD_MODULE_ENABLED */

#ifdef HAL_HCD_MODULE_ENABLED
 #include "stm32h5xx_hal_hcd.h"
#endif /* HAL_HCD_MODULE_ENABLED */

#ifdef HAL_COMP_MODULE_ENABLED
 #include "stm32h5xx_hal_comp.h"
#endif /* HAL_COMP_MODULE_ENABLED */

#ifdef HAL_CORDIC_MODULE_ENABLED
 #include "stm32h5xx_hal_cordic.h"
#endif /* HAL_CORDIC_MODULE_ENABLED */

#ifdef HAL_DCMI_MODULE_ENABLED
 #include "stm32h5xx_hal_dcmi.h"
#endif /* HAL_DCMI_MODULE_ENABLED */

#ifdef HAL_EXTI_MODULE_ENABLED
 #include "stm32h5xx_hal_exti.h"
#endif /* HAL_EXTI_MODULE_ENABLED */

#ifdef HAL_ETH_MODULE_ENABLED
 #include "stm32h5xx_hal_eth.h"
#endif /* HAL_ETH_MODULE_ENABLED */

#ifdef HAL_FDCAN_MODULE_ENABLED
 #include "stm32h5xx_hal_fdcan.h"
#endif /* HAL_FDCAN_MODULE_ENABLED */

#ifdef HAL_CEC_MODULE_ENABLED
  #include "stm32h5xx_hal_cec.h"
#endif /* HAL_CEC_MODULE_ENABLED */

#ifdef HAL_FMAC_MODULE_ENABLED
 #include "stm32h5xx_hal_fmac.h"
#endif /* HAL_FMAC_MODULE_ENABLED */

#ifdef HAL_OPAMP_MODULE_ENABLED
  #include "stm32h5xx_hal_opamp.h"
#endif /* HAL_OPAMP_MODULE_ENABLED */

#ifdef HAL_OTFDEC_MODULE_ENABLED
 #include "stm32h5xx_hal_otfdec.h"
#endif /* HAL_OTFDEC_MODULE_ENABLED */

#ifdef HAL_PSSI_MODULE_ENABLED
 #include "stm32h5xx_hal_pssi.h"
#endif /* HAL_PSSI_MODULE_ENABLED */

#ifdef HAL_RAMCFG_MODULE_ENABLED
 #include "stm32h5xx_hal_ramcfg.h"
#endif /* HAL_RAMCFG_MODULE_ENABLED */

/* Exported macro ----------------------------------------------------------------------------------------------------*/

#ifdef  USE_FULL_ASSERT
/**
  * @brief  The assert_param macro is used for function's parameters check.
  * @param  expr: If expr is false, it calls assert_failed function
  *         which reports the name of the source file and the source
  *         line number of the call that failed.
  *         If expr is true, it returns no value.
  * @retval None
  */
  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
/* Exported functions ----------------------------------------------------------------------------------------------- */

  void assert_failed(uint8_t *file, uint32_t line);
#else
  #define assert_param(expr) ((void)0U)
#endif /* USE_FULL_ASSERT */

#ifdef __cplusplus
}
#endif

#endif /* STM32H5xx_HAL_CONF_H */