rt-thread/components/drivers/usb/cherryusb/port/ch32/ch585_usbhs_reg.h

#pragma once

/**********************************/
/*********USB high speed**********/
/**********************************/
typedef volatile unsigned short *PUINT16V;
typedef volatile unsigned long *PUINT32V;
typedef volatile unsigned char *PUINT8V;

/* USB high speed device register */
#define R8_USB2_CTRL            (*((PUINT8V)0x40009000)) // RW, USB_high_speed control register
#define USBHS_UD_LPM_EN         0x80                     // RW, enable LPM
#define USBHS_UD_DEV_EN         0x20                     // RW, enable USB equipment
#define USBHS_UD_DMA_EN         0x10                     // RW, enable DMA transmit
#define USBHS_UD_PHY_SUSPENDM   0x08                     // RW, suspeng USB PHY
#define USBHS_UD_CLR_ALL        0x04                     // RW, clear all interupt flag
#define USBHS_UD_RST_SIE        0x02                     // RW, reset USB protocol processor,including end point register
#define USBHS_UD_RST_LINK       0x01                     // RW, enable LNK layer reset
#define R8_USB2_BASE_MODE       (*((PUINT8V)0x40009001)) // RW, USB_high_speed mode control register
#define USBHS_UD_SPEED_FULL     0x00
#define USBHS_UD_SPEED_HIGH     0x01
#define USBHS_UD_SPEED_LOW      0x02
#define USBHS_UD_SPEED_TYPE     0x03                      // RW, speed mode excpeted by the equipment,00:full speed, 01:high speed, 10:low speed
#define R8_USB2_INT_EN          (*((PUINT8V)0x40009002))  // RW, USB_high_speed intreurpt enable register
#define USBHS_UDIE_FIFO_OVER    0x80                      // RW, enable fifo overflow interupt
#define USBHS_UDIE_LINK_RDY     0x40                      // RW, enable USB conect interupt
#define USBHS_UDIE_SOF_ACT      0x20                      // RW, enable SOF package received interupt
#define USBHS_UDIE_TRANSFER     0x10                      // RW, enable USB transmit end interupt
#define USBHS_UDIE_LPM_ACT      0x08                      // RW, enable lpm transmit end interupt
#define USBHS_UDIE_BUS_SLEEP    0x04                      // RW, enable usb bus sleep interupt
#define USBHS_UDIE_SUSPEND      0x02                      // RW, enable usb bus suspend interupt
#define USBHS_UDIE_BUS_RST      0x01                      // RW, enable usb bus reset interupt
#define R8_USB2_DEV_AD          (*((PUINT8V)0x40009003))  // RW, USB_high_speed device adress register
#define USBHS_UD_DEV_ADDR       0x7F                      // RW, adress of usb equipment
#define R8_USB2_WAKE_CTRL       (*((PUINT8V)0x40009004))  // RW, USB_high_speed wake up remotely register
#define USBHS_UD_UD_REMOTE_WKUP 0x01                      // RW1, wake up remotely and auto reset hardware
#define R8_USB2_TEST_MODE       (*((PUINT8V)0x40009005))  // RW, USB_high_speed test mode register
#define USBHS_UD_TEST_EN        0x80                      // RW, enable test mode
#define USBHS_UD_TEST_SE0NAK    0x08                      // RW, output SE0 when in test mode
#define USBHS_UD_TEST_PKT       0x04                      // RW, output one package(including DATA0,data and length of end pont4) when in test mode,not work on virtual equipment
#define USBHS_UD_TEST_K         0x02                      // RW, output K when in test mode
#define USBHS_UD_TEST_J         0x01                      // RW, output J when in test mode
#define R16_USB2_LPM_DATA       (*((PUINT16V)0x40009006)) // RW, USB_high_speed power control register
#define USBHS_UD_LPM_BUSY       0x8000                    // RW, power control busy
#define USBHS_UD_LPM_DATA       0x07FF                    // RO, power control data
#define R8_USB2_INT_FG          (*((PUINT8V)0x40009008))  // RW, USB_high_speed interupt flag register
#define USBHS_UDIF_FIFO_OV      0x80                      // RW1, clear fifo overflow interupt flag
#define USBHS_UDIF_LINK_RDY     0x40                      // RW1, clear USB conect interupt flag
#define USBHS_UDIF_RX_SOF       0x20                      // RW1, clear SOF package received interupt flag
#define USBHS_UDIF_TRANSFER     0x10                      // RO,  USB transmit end interupt flag,cleared by USBHS_UDMS_HS_MOD
#define USBHS_UDIF_LPM_ACT      0x08                      // RW1, clear lpm transmit end interupt flag
#define USBHS_UDIF_BUS_SLEEP    0x04                      // RW1, clear usb bus sleep interupt flag
#define USBHS_UDIF_SUSPEND      0x02                      // RW1, clear usb bus suspend interupt flag
#define USBHS_UDIF_BUS_RST      0x01                      // RW1, clear usb bus reset interupt flag
#define R8_USB2_INT_ST          (*((PUINT8V)0x40009009))  // RW, USB_high_speed interupt status register
#define USBHS_UDIS_EP_DIR       0x10                      // RO, end point tranfer diector of data
#define USBHS_UDIS_EP_ID_MASK   0x07                      // RO, number of end point which data transmission occured
#define R8_USB2_MIS_ST          (*((PUINT8V)0x4000900A))  // RW, USB_high_speed miscellaneous register
#define USBHS_UDMS_HS_MOD       0x80                      // RO, host with high speed
#define USBHS_UDMS_SUSP_REQ     0x10                      // RO, requirment of suspending USB
#define USBHS_UDMS_SIE_FREE     0x08                      // RO, USB free state
#define USBHS_UDMS_SLEEP        0x04                      // RO, USB sleep state
#define USBHS_UDMS_SUSPEND      0x02                      // RO, USB in suspend state
#define USBHS_UDMS_READY        0x01                      // RO, USB in connected state
#define R16_USB2_FRAME_NO       (*((PUINT16V)0x4000900C)) // RW, USB_high_speed frame number register
#define USBHS_UD_MFRAME_NO      0xE000
#define USBHS_UD_FRAME_NO       0x07FF
#define R16_USB2_BUS            (*((PUINT16V)0x4000900E)) // RW, USB_high_speed bus status register
#define USBHS_USB_DM_ST         0x08
#define USBHS_USB_DP_ST         0x04
#define USB_WAKEUP              0x01
#define R16_U2EP_TX_EN          (*((PUINT16V)0x40009010)) // RW, USB_high_speed end point transmit enable register
/* Bit definition for R16_U2EP_TX_EN & R16_U2EP_RX_EN register */
#define RB_EP0_EN  0x0001
#define RB_EP1_EN  0x0002
#define RB_EP2_EN  0x0004
#define RB_EP3_EN  0x0008
#define RB_EP4_EN  0x0010
#define RB_EP5_EN  0x0020
#define RB_EP6_EN  0x0040
#define RB_EP7_EN  0x0080
#define RB_EP8_EN  0x0100
#define RB_EP9_EN  0x0200
#define RB_EP10_EN 0x0400
#define RB_EP11_EN 0x0800
#define RB_EP12_EN 0x1000
#define RB_EP13_EN 0x2000
#define RB_EP14_EN 0x4000
#define RB_EP15_EN 0x8000

#define R16_U2EP_RX_EN         (*((PUINT16V)0x40009012)) // RW, USB_high_speed end point receive enableregister
#define USBHS_UEP_RX_EN        0xFFFF
#define R16_U2EP_T_TOG_AUTO    (*((PUINT16V)0x40009014)) // RW, USB_high_speed end point transmit auto toggle enable register
#define USBHS_UEP_T_TOG_AUTO   0xFF
#define R16_U2EP_R_TOG_AUTO    (*((PUINT16V)0x40009016)) // RW, USB_high_speed end point receive auto toggle enable register
#define USBHS_UEP_R_TOG_AUTO   0xFF
#define R8_U2EP_T_BURST        (*((PUINT8V)0x40009018)) // RW, USB_high_speed end point transmit burst register
#define USBHS_UEP_T_BURST_EN   0xFF
#define R8_U2EP_T_BURST_MODE   (*((PUINT8V)0x40009019)) // RW, USB_high_speed end point transmit burst mode register
#define USBHS_UEP_T_BURST_MODE 0xFF
#define R8_U2EP_R_BURST        (*((PUINT8V)0x4000901A)) // RW, USB_high_speed end point receive burst register
#define USBHS_UEP_R_BURST_EN   0xFF
#define R8_U2EP_R_RES_MODE     (*((PUINT8V)0x4000901B)) // RW, USB_high_speed end point transmit reply mode register
#define USBHS_UEP_R_RES_MODE   0xFF
#define R32_U2EP_AF_MODE       (*((PUINT32V)0x4000901C)) // RW, USB_high_speed end point multiplexing register
#define USBHS_UEP_T_AF         0xFE
#define R32_U2EP0_DMA          (*((PUINT32V)0x40009020)) // RW, USB_high_speed end point0 begin adress of DMA buffer register
#define UEPn_DMA               0x01FFFF
#define R32_U2EP1_RX_DMA       (*((PUINT32V)0x40009024)) // RW, USB_high_speed end point1 begin adress of DMA receive buffer register
#define R32_U2EP2_RX_DMA       (*((PUINT32V)0x40009028)) // RW, USB_high_speed end point2 begin adress of DMA receive buffer register
#define R32_U2EP3_RX_DMA       (*((PUINT32V)0x4000902C)) // RW, USB_high_speed end point3 begin adress of DMA receive buffer register
#define R32_U2EP4_RX_DMA       (*((PUINT32V)0x40009030)) // RW, USB_high_speed end point4 begin adress of DMA receive buffer register
#define R32_U2EP5_RX_DMA       (*((PUINT32V)0x40009034)) // RW, USB_high_speed end point5 begin adress of DMA receive buffer register
#define R32_U2EP6_RX_DMA       (*((PUINT32V)0x40009038)) // RW, USB_high_speed end point6 begin adress of DMA receive buffer register
#define R32_U2EP7_RX_DMA       (*((PUINT32V)0x4000903C)) // RW, USB_high_speed end point7 begin adress of DMA receive buffer register
#define UEPn_RX_DMA            0x01FFFF
#define R32_U2EP1_TX_DMA       (*((PUINT32V)0x40009040)) // RW, USB_high_speed end point1 begin adress of DMA transmit buffer register
#define R32_U2EP2_TX_DMA       (*((PUINT32V)0x40009044)) // RW, USB_high_speed end point2 begin adress of DMA transmit buffer register
#define R32_U2EP3_TX_DMA       (*((PUINT32V)0x40009048)) // RW, USB_high_speed end point3 begin adress of DMA transmit buffer register
#define R32_U2EP4_TX_DMA       (*((PUINT32V)0x4000904C)) // RW, USB_high_speed end point4 begin adress of DMA transmit buffer register
#define R32_U2EP5_TX_DMA       (*((PUINT32V)0x40009050)) // RW, USB_high_speed end point5 begin adress of DMA transmit buffer register
#define R32_U2EP6_TX_DMA       (*((PUINT32V)0x40009054)) // RW, USB_high_speed end point6 begin adress of DMA transmit buffer register
#define R32_U2EP7_TX_DMA       (*((PUINT32V)0x40009058)) // RW, USB_high_speed end point7 begin adress of DMA transmit buffer register
#define UEPn_TX_DMA            0x01FFFF
#define R32_U2EP0_MAX_LEN      (*((PUINT32V)0x4000905C)) // RW, USB_high_speed end point0 max length package register
#define R32_U2EP1_MAX_LEN      (*((PUINT32V)0x40009060)) // RW, USB_high_speed end point1 max length package register
#define R32_U2EP2_MAX_LEN      (*((PUINT32V)0x40009064)) // RW, USB_high_speed end point2 max length package register
#define R32_U2EP3_MAX_LEN      (*((PUINT32V)0x40009068)) // RW, USB_high_speed end point3 max length package register
#define R32_U2EP4_MAX_LEN      (*((PUINT32V)0x4000906C)) // RW, USB_high_speed end point4 max length package register
#define R32_U2EP5_MAX_LEN      (*((PUINT32V)0x40009070)) // RW, USB_high_speed end point5 max length package register
#define R32_U2EP6_MAX_LEN      (*((PUINT32V)0x40009074)) // RW, USB_high_speed end point6 max length package register
#define R32_U2EP7_MAX_LEN      (*((PUINT32V)0x40009078)) // RW, USB_high_speed end point7 max length package register
#define UEPn_MAX_LEN           0x007F
#define R16_U2EP0_RX_LEN       (*((PUINT16V)0x4000907C)) // RW, USB_high_speed end point0 length of receive register
#define UEP0_RX_LEN            0x007F
#define R16_U2EP1_RX_LEN       (*((PUINT16V)0x40009080)) // RW, USB_high_speed end point1 single received length register
#define R16_U2EP1_R_SIZE       (*((PUINT16V)0x40009082)) // RW, USB_high_speed end point1 total received length register
#define R16_U2EP2_RX_LEN       (*((PUINT16V)0x40009084)) // RW, USB_high_speed end point2 single received length register
#define R16_U2EP2_R_SIZE       (*((PUINT16V)0x40009086)) // RW, USB_high_speed end point2 total received length register
#define R16_U2EP3_RX_LEN       (*((PUINT16V)0x40009088)) // RW, USB_high_speed end point3 single received length register
#define R16_U2EP3_R_SIZE       (*((PUINT16V)0x4000908A)) // RW, USB_high_speed end point3 total received length register
#define R16_U2EP4_RX_LEN       (*((PUINT16V)0x4000908C)) // RW, USB_high_speed end point4 single received length register
#define R16_U2EP4_R_SIZE       (*((PUINT16V)0x4000908E)) // RW, USB_high_speed end point4 total received length register
#define R16_U2EP5_RX_LEN       (*((PUINT16V)0x40009090)) // RW, USB_high_speed end point5 single received length register
#define R16_U2EP5_R_SIZE       (*((PUINT16V)0x40009092)) // RW, USB_high_speed end point5 total received length register
#define R16_U2EP6_RX_LEN       (*((PUINT16V)0x40009094)) // RW, USB_high_speed end point6 single received length register
#define R16_U2EP6_R_SIZE       (*((PUINT16V)0x40009096)) // RW, USB_high_speed end point6 total received length register
#define R16_U2EP7_RX_LEN       (*((PUINT16V)0x40009098)) // RW, USB_high_speed end point7 single received length register
#define R16_U2EP7_R_SIZE       (*((PUINT16V)0x4000909A)) // RW, USB_high_speed end point7 total received length register
#define UEPn_RX_LEN            0xFFFF
#define UEPn_R_SIZE            0xFFFF
#define R16_U2EP0_T_LEN        (*((PUINT16V)0x4000909C)) // RW, USB_high_speed end point0 length of transmission register
#define UEP0_T_LEN             0x7F
#define R8_U2EP0_TX_CTRL       (*((PUINT8V)0x4000909E))  // RW, USB_high_speed end point0 transmit control register
#define R8_U2EP0_RX_CTRL       (*((PUINT8V)0x4000909F))  // RW, USB_high_speed end point0 receive control register
#define R16_U2EP1_T_LEN        (*((PUINT16V)0x400090A0)) // RW, USB_high_speed end point1 length of transmission register
#define R8_U2EP1_TX_CTRL       (*((PUINT8V)0x400090A2))  // RW, USB_high_speed end point1 transmit control register
#define R8_U2EP1_RX_CTRL       (*((PUINT8V)0x400090A3))  // RW, USB_high_speed end point1 receive control register
#define R16_U2EP2_T_LEN        (*((PUINT16V)0x400090A4)) // RW, USB_high_speed end point2 length of transmission register
#define R8_U2EP2_TX_CTRL       (*((PUINT8V)0x400090A6))  // RW, USB_high_speed end point2 transmit control register
#define R8_U2EP2_RX_CTRL       (*((PUINT8V)0x400090A7))  // RW, USB_high_speed end point2 receive control register
#define R16_U2EP3_T_LEN        (*((PUINT16V)0x400090A8)) // RW, USB_high_speed end point3 length of transmission register
#define R8_U2EP3_TX_CTRL       (*((PUINT8V)0x400090AA))  // RW, USB_high_speed end point3 transmit control register
#define R8_U2EP3_RX_CTRL       (*((PUINT8V)0x400090AB))  // RW, USB_high_speed end point3 receive control register
#define R16_U2EP4_T_LEN        (*((PUINT16V)0x400090AC)) // RW, USB_high_speed end point4 length of transmission register
#define R8_U2EP4_TX_CTRL       (*((PUINT8V)0x400090AE))  // RW, USB_high_speed end point4 transmit control register
#define R8_U2EP4_RX_CTRL       (*((PUINT8V)0x400090AF))  // RW, USB_high_speed end point4 receive control register
#define R16_U2EP5_T_LEN        (*((PUINT16V)0x400090B0)) // RW, USB_high_speed end point5 length of transmission register
#define R8_U2EP5_TX_CTRL       (*((PUINT8V)0x400090B2))  // RW, USB_high_speed end point5 transmit control register
#define R8_U2EP5_RX_CTRL       (*((PUINT8V)0x400090B3))  // RW, USB_high_speed end point5 receive control register
#define R16_U2EP6_T_LEN        (*((PUINT16V)0x400090B4)) // RW, USB_high_speed end point6 length of transmission register
#define R8_U2EP6_TX_CTRL       (*((PUINT8V)0x400090B6))  // RW, USB_high_speed end point6 transmit control register
#define R8_U2EP6_RX_CTRL       (*((PUINT8V)0x400090B7))  // RW, USB_high_speed end point6 receive control register
#define R16_U2EP7_T_LEN        (*((PUINT16V)0x400090B8)) // RW, USB_high_speed end point7 length of transmission register
#define R8_U2EP7_TX_CTRL       (*((PUINT8V)0x400090BA))  // RW, USB_high_speed end point7 transmit control register
#define R8_U2EP7_RX_CTRL       (*((PUINT8V)0x400090BB))  // RW, USB_high_speed end point7 receive control register
/**R16_UEPn_T_LEN**/
#define UEPn_T_LEN 0xFFFF
/**R8_UEPn_TX_CTRL**/
#define USBHS_UEP_T_DONE      0x80
#define USBHS_UEP_T_NAK_ACT   0x40
#define USBHS_UEP_T_TOG_MASK  0x0C
#define USBHS_UEP_T_TOG_MDATA 0x0C
#define USBHS_UEP_T_TOG_DATA2 0x08
#define USBHS_UEP_T_TOG_DATA1 0x04
#define USBHS_UEP_T_TOG_DATA0 0x00
#define USBHS_UEP_T_RES_MASK  0x03
#define USBHS_UEP_T_RES_ACK   0x02
#define USBHS_UEP_T_RES_STALL 0x01
#define USBHS_UEP_T_RES_NAK   0x00

/**R8_UEPn_RX_CTRL**/
#define USBHS_UEP_R_DONE      0x80
#define USBHS_UEP_R_NAK_ACT   0x40
#define USBHS_UEP_R_NAK_TOG   0x20
#define USBHS_UEP_R_TOG_MATCH 0x10
#define USBHS_UEP_R_SETUP_IS  0x08
#define USBHS_UEP_R_TOG_MASK  0x0C
#define USBHS_UEP_R_TOG_MDATA 0x0C
#define USBHS_UEP_R_TOG_DATA2 0x08
#define USBHS_UEP_R_TOG_DATA1 0x04
#define USBHS_UEP_R_TOG_DATA0 0x00
#define USBHS_UEP_R_RES_MASK  0x03
#define USBHS_UEP_R_RES_ACK   0x02
#define USBHS_UEP_R_RES_STALL 0x01
#define USBHS_UEP_R_RES_NAK   0x00

#define R16_U2EP_T_ISO      (*((PUINT16V)0x400090BC)) // RW, USB_high_speed end point transmit sync mode register
#define USBHS_UEP1_T_ISO_EN 0x02
#define USBHS_UEP2_T_ISO_EN 0x04
#define USBHS_UEP3_T_ISO_EN 0x08
#define USBHS_UEP4_T_ISO_EN 0x10
#define USBHS_UEP5_T_ISO_EN 0x20
#define USBHS_UEP6_T_ISO_EN 0x40
#define USBHS_UEP7_T_ISO_EN 0x80
#define R16_U2EP_R_ISO      (*((PUINT16V)0x400090BE)) // RW, USB_high_speed end point receive sync mode register
#define USBHS_UEP1_R_ISO_EN 0x02
#define USBHS_UEP2_R_ISO_EN 0x04
#define USBHS_UEP3_R_ISO_EN 0x08
#define USBHS_UEP4_R_ISO_EN 0x10
#define USBHS_UEP5_R_ISO_EN 0x20
#define USBHS_UEP6_R_ISO_EN 0x40
#define USBHS_UEP7_R_ISO_EN 0x80

/* USB high speed host register  */
#define R8_U2H_CFG            (*((PUINT8V)0x40009100)) // RW, USB_high_speed register
#define USBHS_UH_LPM_EN       0x80
#define USBHS_UH_FORCE_FS     0x40
#define USBHS_UH_SOF_EN       0x20
#define USBHS_UH_DMA_EN       0x10
#define USBHS_UH_PHY_SUSPENDM 0x08
#define USBHS_UH_CLR_ALL      0x04
#define USBHS_RST_SIE         0x02
#define USBHS_RST_LINK        0x01
#define R8_U2H_INT_EN         (*((PUINT8V)0x40009102)) // RW, USB_high_speed register
#define USBHS_UHIE_FIFO_OVER  0x80
#define USBHS_UHIE_TX_HALT    0x40
#define USBHS_UHIE_SOF_ACT    0x20
#define USBHS_UHIE_TRANSFER   0x10
#define USBHS_UHIE_RESUME_ACT 0x08
#define USBHS_UHIE_WKUP_ACT   0x04
#define R8_U2H_DEV_AD         (*((PUINT8V)0x40009103)) // RW, USB_high_speed register
#define USBHS_UH_DEV_ADDR     0xFF
#define R32_U2H_CONTROL       (*((PUINT32V)0x40009104)) // RW, USB_high_speed register
#define USBHS_UH_RX_NO_RES    0x800000
#define USBHS_UH_TX_NO_RES    0x400000
#define USBHS_UH_RX_NO_DATA   0x200000
#define USBHS_UH_TX_NO_DATA   0x100000
#define USBHS_UH_PRE_PID_EN   0x080000
#define USBHS_UH_SPLIT_VALID  0x040000
#define USBHS_UH_LPM_VALID    0x020000
#define USBHS_UH_HOST_ACTION  0x010000
#define USBHS_UH_BUF_MODE     0x0400
#define USBHS_UH_T_TOG_MASK   0x0300
#define USBHS_UH_T_TOG_MDATA  0x0300
#define USBHS_UH_T_TOG_DATA2  0x0200
#define USBHS_UH_T_TOG_DATA1  0x0100
#define USBHS_UH_T_TOG_DATA0  0x0000
#define USBHS_UH_T_ENDP_MASK  0xF0
#define USBHS_UH_T_TOKEN_MASK 0x0F

#define R8_U2H_INT_FLAG            (*((PUINT8V)0x40009108)) // RW, USB_high_speed register
#define USBHS_UHIF_FIFO_OVER       0x80
#define USBHS_UHIF_TX_HALT         0x40
#define USBHS_UHIF_SOF_ACT         0x20
#define USBHS_UHIF_TRANSFER        0x10
#define USBHS_UHIF_RESUME_ACT      0x08
#define USBHS_UHIF_WKUP_ACT        0x04
#define R8_U2H_INT_ST              (*((PUINT8V)0x40009109)) // RW, USB_high_speed register
#define USBHS_UHIF_PORT_RX_RESUME  0x10
#define USBHS_UH_R_TOKEN_MASK      0x0F
#define R8_U2H_MIS_ST              (*((PUINT8V)0x4000910A)) // RW, USB_high_speed register
#define USBHS_UHMS_BUS_SE0         0x80
#define USBHS_UHMS_BUS_J           0x40
#define USBHS_UHMS_LINESTATE       0x30
#define USBHS_UHMS_USB_WAKEUP      0x08
#define USBHS_UHMS_SOF_ACT         0x04
#define USBHS_UHMS_SOF_PRE         0x02
#define USBHS_UHMS_SOF_FREE        0x01
#define R32_U2H_LPM_DATA           (*((PUINT32V)0x4000910C)) // RW, USB_high_speed register
#define USBHS_UH_LPM_DATA          0x07FF
#define R32_U2H_SPLIT_DATA         (*((PUINT32V)0x40009110)) // RW, USB_high_speed register
#define USBHS_UH_SPLIT_DATA        0x07FFFF
#define R32_U2H_FRAME              (*((PUINT32V)0x40009114)) // RW, USB_high_speed register
#define USBHS_UH_SOF_CNT_CLR       0x02000000
#define USBHS_UH_SOF_CNT_EN        0x01000000
#define USBHS_UH_MFRAME_NO         0x070000
#define USBHS_UH_FRAME_NO          0x07FF
#define R32_U2H_TX_LEN             (*((PUINT32V)0x40009118)) // RW, USB_high_speed register
#define USBHS_UH_TX_LEN            0x07FF
#define R32_U2H_RX_LEN             (*((PUINT32V)0x4000911C)) // RW, USB_high_speed register
#define USBHS_UH_RX_LEN            0x07FF
#define R32_U2H_RX_MAX_LEN         (*((PUINT32V)0x40009120)) // RW, USB_high_speed register
#define USBHS_UH_RX_MAX_LEN        0x07FF
#define R32_U2H_RX_DMA             (*((PUINT32V)0x40009124)) // RW, USB_high_speed register
#define USBHS_R32_UH_RX_DMA        0x01FFFF
#define R32_U2H_TX_DMA             (*((PUINT32V)0x40009128)) // RW, USB_high_speed register
#define USBHS_R32_UH_TX_DMA        0x01FFFF
#define R32_U2H_PORT_CTRL          (*((PUINT32V)0x4000912C)) // RW, USB_high_speed register
#define USBHS_UH_BUS_RST_LONG      0x010000
#define USBHS_UH_PORT_SLEEP_BESL   0xF000
#define USBHS_UH_CLR_PORT_SLEEP    0x0100
#define USBHS_UH_CLR_PORT_CONNECT  0x20
#define USBHS_UH_CLR_PORT_EN       0x10
#define USBHS_UH_SET_PORT_SLEEP    0x08
#define USBHS_UH_CLR_PORT_SUSP     0x04
#define USBHS_UH_SET_PORT_SUSP     0x02
#define USBHS_UH_SET_PORT_RESET    0x01
#define R8_U2H_PORT_CFG            (*((PUINT8V)0x40009130)) // RW, USB_high_speed register
#define USBHS_UH_PD_EN             0x80
#define USBHS_UH_HOST_EN           0x01
#define R8_U2H_PORT_INT_EN         (*((PUINT8V)0x40009132)) // RW, USB_high_speed register
#define USBHS_UHIE_PORT_SLP        0x20
#define USBHS_UHIE_PORT_RESET      0x10
#define USBHS_UHIE_PORT_SUSP       0x04
#define USBHS_UHIE_PORT_EN         0x02
#define USBHS_UHIE_PORT_CONNECT    0x01
#define R8_U2H_PORT_TEST_CT        (*((PUINT8V)0x40009133)) // RW, USB_high_speed register
#define USBHS_UH_TEST_FORCE_EN     0x04
#define USBHS_UH_TEST_K            0x02
#define USBHS_UH_TEST_J            0x01
#define R16_U2H_PORT_ST            (*((PUINT16V)0x40009134)) // RW, USB_high_speed register
#define USBHS_UHIS_PORT_TEST       0x0800
#define USBHS_UHIS_PORT_SPEED_MASK 0x0600
#define USBHS_UHIS_PORT_HS         0x0400
#define USBHS_UHIS_PORT_LS         0x0200
#define USBHS_UHIS_PORT_FS         0x0000
#define USBHS_UHIS_PORT_SLP        0x20
#define USBHS_UHIS_PORT_RST        0x10
#define USBHS_UHIS_PORT_SUSP       0x04
#define USBHS_UHIS_PORT_EN         0x02
#define USBHS_UHIS_PORT_CONNECT    0x01
#define R8_U2H_PORT_CHG            (*((PUINT8V)0x40009136))
#define USBHS_UHIF_PORT_SLP        0x20
#define USBHS_UHIF_PORT_RESET      0x10
#define USBHS_UHIF_PORT_SUSP       0x04
#define USBHS_UHIF_PORT_EN         0x02
#define USBHS_UHIF_PORT_CONNECT    0x01
#define R32_U2H_BC_CTRL            (*((PUINT32V)0x4000913C))
#define UDM_VSRC_ACT               0x0400
#define UDM_BC_VSRC                0x0200
#define UDP_BC_VSRC                0x0100
#define BC_AUTO_MODE               0x40
#define UDM_BC_CMPE                0x20
#define UDP_BC_CMPE                0x10
#define UDM_BC_CMPO                0x02
#define UDP_BC_CMPO                0x01
#define R8_USBHS_PLL_CTRL          (*((PUINT8V)0x40009200))
#define USBHS_PLL_EN               0x04
#define USBHS_PLL_LOWPOW           0x02
#define USBHS_PLL_CKSEL            0x01

#define __IO volatile /* defines 'read / write' permissions */

typedef struct
{
    __IO uint8_t CONTROL;     /* 0x40009000 */
    __IO uint8_t BASE_MODE;   /* 0x40009001 */
    __IO uint8_t INT_EN;      /* 0x40009002 */
    __IO uint8_t DEV_AD;      /* 0x40009003 */
    __IO uint8_t WAKE_CTRL;   /* 0x40009004 远程唤醒寄存器 */
    __IO uint8_t TEST_MODE;   /* 0x40009005 测试模式寄存器 */
    __IO uint16_t LPM_DATA;   /* 0x40009006 */
    __IO uint8_t INT_FG;      /* 0x40009008 */
    __IO uint8_t INT_ST;      /* 0x40009009 */
    __IO uint8_t MIS_ST;      /* 0x4000900a */
    __IO uint8_t RESERVE0;    /* 0x4000900b */
    __IO uint16_t FRAME_NO;   /* 0x4000900c */
    __IO uint16_t USB_BUS;    /* 0x4000900e */
    __IO uint16_t UEP_TX_EN;  /* 0x40009010 */
    __IO uint16_t UEP_RX_EN;  /* 0x40009012 */

    __IO uint16_t UEP_T_TOG_AUTO;  /* 0x40009014 */
    __IO uint16_t UEP_R_TOG_AUTO;  /* 0x40009016 */
    __IO uint8_t UEP_T_BURST;      /* 0x40009018 */
    __IO uint8_t UEP_T_BURST_MODE; /* 0x40009019 */
    __IO uint8_t UEP_R_BURST;      /* 0x4000901a */
    __IO uint8_t UEP_R_RES_MODE;   /* 0x4000901b */
    __IO uint32_t UEP_AF_MODE;     /* 0x4000901c */

    __IO uint32_t UEP0_DMA;    /* 0x40009020 */
    __IO uint32_t UEP1_RX_DMA; /* 0x40009024 */
    __IO uint32_t UEP2_RX_DMA; /* 0x40009028 */
    __IO uint32_t UEP3_RX_DMA; /* 0x4000902c */
    __IO uint32_t UEP4_RX_DMA; /* 0x40009030 */
    __IO uint32_t UEP5_RX_DMA; /* 0x40009034 */
    __IO uint32_t UEP6_RX_DMA; /* 0x40009038 */
    __IO uint32_t UEP7_RX_DMA; /* 0x4000903c */

    __IO uint32_t UEP1_TX_DMA; /* 0x40009040 */
    __IO uint32_t UEP2_TX_DMA; /* 0x40009044 */
    __IO uint32_t UEP3_TX_DMA; /* 0x40009048 */
    __IO uint32_t UEP4_TX_DMA; /* 0x4000904c */
    __IO uint32_t UEP5_TX_DMA; /* 0x40009050 */
    __IO uint32_t UEP6_TX_DMA; /* 0x40009054 */
    __IO uint32_t UEP7_TX_DMA; /* 0x40009058 */

    __IO uint32_t UEP0_MAX_LEN; /* 0x4000905c */
    __IO uint32_t UEP1_MAX_LEN; /* 0x40009060 */
    __IO uint32_t UEP2_MAX_LEN; /* 0x40009064 */
    __IO uint32_t UEP3_MAX_LEN; /* 0x40009068 */
    __IO uint32_t UEP4_MAX_LEN; /* 0x4000906c */
    __IO uint32_t UEP5_MAX_LEN; /* 0x40009070 */
    __IO uint32_t UEP6_MAX_LEN; /* 0x40009074 */
    __IO uint32_t UEP7_MAX_LEN; /* 0x40009078 */

    __IO uint16_t USB_EP0_RX_LEN; /* 0x4000907c */
    __IO uint16_t RESERVE1;       /* 0x4000907e */
    __IO uint16_t UEP1_RX_LEN;    /* 0x40009080 */
    __IO uint16_t UEP1_R_SIZE;    /* 0x40009082 */
    __IO uint16_t UEP2_RX_LEN;    /* 0x40009084 */
    __IO uint16_t UEP2_R_SIZE;    /* 0x40009086 */
    __IO uint16_t UEP3_RX_LEN;    /* 0x40009088 */
    __IO uint16_t UEP3_R_SIZE;    /* 0x4000908a */
    __IO uint16_t UEP4_RX_LEN;    /* 0x4000908c */
    __IO uint16_t UEP4_R_SIZE;    /* 0x4000908e */
    __IO uint16_t UEP5_RX_LEN;    /* 0x40009090 */
    __IO uint16_t UEP5_R_SIZE;    /* 0x40009092 */
    __IO uint16_t UEP6_RX_LEN;    /* 0x40009094 */
    __IO uint16_t UEP6_R_SIZE;    /* 0x40009096 */
    __IO uint16_t UEP7_RX_LEN;    /* 0x40009098 */
    __IO uint16_t UEP7_R_SIZE;    /* 0x4000909a */

    __IO uint16_t UEP0_TX_LEN; /* 0x4000909c */
    __IO uint8_t UEP0_TX_CTRL; /* 0x4000909e */
    __IO uint8_t UEP0_RX_CTRL; /* 0x4000909f */
    __IO uint16_t UEP1_TX_LEN; /* 0x400090a0 */
    __IO uint8_t UEP1_TX_CTRL; /* 0x400090a2 */
    __IO uint8_t UEP1_RX_CTRL; /* 0x400090a3 */
    __IO uint16_t UEP2_TX_LEN; /* 0x400090a4 */
    __IO uint8_t UEP2_TX_CTRL; /* 0x400090a6 */
    __IO uint8_t UEP2_RX_CTRL; /* 0x400090a7 */
    __IO uint16_t UEP3_TX_LEN; /* 0x400090a8 */
    __IO uint8_t UEP3_TX_CTRL; /* 0x400090aa */
    __IO uint8_t UEP3_RX_CTRL; /* 0x400090ab */
    __IO uint16_t UEP4_TX_LEN; /* 0x400090ac */
    __IO uint8_t UEP4_TX_CTRL; /* 0x400090ae */
    __IO uint8_t UEP4_RX_CTRL; /* 0x400090af */
    __IO uint16_t UEP5_TX_LEN; /* 0x400090b0 */
    __IO uint8_t UEP5_TX_CTRL; /* 0x400090b2 */
    __IO uint8_t UEP5_RX_CTRL; /* 0x400090b3 */
    __IO uint16_t UEP6_TX_LEN; /* 0x400090b4 */
    __IO uint8_t UEP6_TX_CTRL; /* 0x400090b6 */
    __IO uint8_t UEP6_RX_CTRL; /* 0x400090b7 */
    __IO uint16_t UEP7_TX_LEN; /* 0x400090b8 */
    __IO uint8_t UEP7_TX_CTRL; /* 0x400090ba */
    __IO uint8_t UEP7_RX_CTRL; /* 0x400090bb */
    __IO uint16_t UEP_TX_ISO;  /* 0x400090bc */
    __IO uint16_t UEP_RX_ISO;  /* 0x400090be */
} USBHSD_TypeDef;