123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170 |
- /**
- * \file
- *
- * \brief SAM D20 Clock configuration
- *
- * Copyright (C) 2012-2015 Atmel Corporation. All rights reserved.
- *
- * \asf_license_start
- *
- * \page License
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. The name of Atmel may not be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * 4. This software may only be redistributed and used in connection with an
- * Atmel microcontroller product.
- *
- * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
- * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- * \asf_license_stop
- *
- */
- /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
- */
- #include <clock.h>
- #ifndef CONF_CLOCKS_H_INCLUDED
- # define CONF_CLOCKS_H_INCLUDED
- /* System clock bus configuration */
- # define CONF_CLOCK_FLASH_WAIT_STATES 0
- # define CONF_CLOCK_CPU_DIVIDER SYSTEM_MAIN_CLOCK_DIV_1
- # define CONF_CLOCK_APBA_DIVIDER SYSTEM_MAIN_CLOCK_DIV_1
- # define CONF_CLOCK_APBB_DIVIDER SYSTEM_MAIN_CLOCK_DIV_1
- # define CONF_CLOCK_APBC_DIVIDER SYSTEM_MAIN_CLOCK_DIV_1
- /* SYSTEM_CLOCK_SOURCE_OSC8M configuration - Internal 8MHz oscillator */
- # define CONF_CLOCK_OSC8M_PRESCALER SYSTEM_OSC8M_DIV_1
- # define CONF_CLOCK_OSC8M_ON_DEMAND true
- # define CONF_CLOCK_OSC8M_RUN_IN_STANDBY false
- /* SYSTEM_CLOCK_SOURCE_XOSC configuration - External clock/oscillator */
- # define CONF_CLOCK_XOSC_ENABLE false
- # define CONF_CLOCK_XOSC_EXTERNAL_CRYSTAL SYSTEM_CLOCK_EXTERNAL_CRYSTAL
- # define CONF_CLOCK_XOSC_EXTERNAL_FREQUENCY 12000000UL
- # define CONF_CLOCK_XOSC_STARTUP_TIME SYSTEM_XOSC_STARTUP_32768
- # define CONF_CLOCK_XOSC_AUTO_GAIN_CONTROL true
- # define CONF_CLOCK_XOSC_ON_DEMAND true
- # define CONF_CLOCK_XOSC_RUN_IN_STANDBY false
- /* SYSTEM_CLOCK_SOURCE_XOSC32K configuration - External 32KHz crystal/clock oscillator */
- # define CONF_CLOCK_XOSC32K_ENABLE false
- # define CONF_CLOCK_XOSC32K_EXTERNAL_CRYSTAL SYSTEM_CLOCK_EXTERNAL_CRYSTAL
- # define CONF_CLOCK_XOSC32K_STARTUP_TIME SYSTEM_XOSC32K_STARTUP_65536
- # define CONF_CLOCK_XOSC32K_AUTO_AMPLITUDE_CONTROL false
- # define CONF_CLOCK_XOSC32K_ENABLE_1KHZ_OUPUT false
- # define CONF_CLOCK_XOSC32K_ENABLE_32KHZ_OUTPUT true
- # define CONF_CLOCK_XOSC32K_ON_DEMAND true
- # define CONF_CLOCK_XOSC32K_RUN_IN_STANDBY false
- /* SYSTEM_CLOCK_SOURCE_OSC32K configuration - Internal 32KHz oscillator */
- # define CONF_CLOCK_OSC32K_ENABLE false
- # define CONF_CLOCK_OSC32K_STARTUP_TIME SYSTEM_OSC32K_STARTUP_130
- # define CONF_CLOCK_OSC32K_ENABLE_1KHZ_OUTPUT true
- # define CONF_CLOCK_OSC32K_ENABLE_32KHZ_OUTPUT true
- # define CONF_CLOCK_OSC32K_ON_DEMAND true
- # define CONF_CLOCK_OSC32K_RUN_IN_STANDBY false
- /* SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop */
- # define CONF_CLOCK_DFLL_ENABLE false
- # define CONF_CLOCK_DFLL_LOOP_MODE SYSTEM_CLOCK_DFLL_LOOP_MODE_OPEN
- # define CONF_CLOCK_DFLL_ON_DEMAND false
- /* DFLL open loop mode configuration */
- # define CONF_CLOCK_DFLL_FINE_VALUE (512)
- /* DFLL closed loop mode configuration */
- # define CONF_CLOCK_DFLL_SOURCE_GCLK_GENERATOR GCLK_GENERATOR_1
- # define CONF_CLOCK_DFLL_MULTIPLY_FACTOR 1465 /* (48000000 / 32768) */
- # define CONF_CLOCK_DFLL_QUICK_LOCK true
- # define CONF_CLOCK_DFLL_TRACK_AFTER_FINE_LOCK true
- # define CONF_CLOCK_DFLL_KEEP_LOCK_ON_WAKEUP true
- # define CONF_CLOCK_DFLL_ENABLE_CHILL_CYCLE true
- # define CONF_CLOCK_DFLL_MAX_COARSE_STEP_SIZE (0x1f / 4)
- # define CONF_CLOCK_DFLL_MAX_FINE_STEP_SIZE (0xff / 4)
- /* Set this to true to configure the GCLK when running clocks_init. If set to
- * false, none of the GCLK generators will be configured in clocks_init(). */
- # define CONF_CLOCK_CONFIGURE_GCLK true
- /* Configure GCLK generator 0 (Main Clock) */
- # define CONF_CLOCK_GCLK_0_ENABLE true
- # define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY false
- # define CONF_CLOCK_GCLK_0_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_OSC8M
- # define CONF_CLOCK_GCLK_0_PRESCALER 1
- # define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE false
- /* Configure GCLK generator 1 */
- # define CONF_CLOCK_GCLK_1_ENABLE false
- # define CONF_CLOCK_GCLK_1_RUN_IN_STANDBY false
- # define CONF_CLOCK_GCLK_1_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_XOSC32K
- # define CONF_CLOCK_GCLK_1_PRESCALER 1
- # define CONF_CLOCK_GCLK_1_OUTPUT_ENABLE false
- /* Configure GCLK generator 2 (RTC) */
- # define CONF_CLOCK_GCLK_2_ENABLE false
- # define CONF_CLOCK_GCLK_2_RUN_IN_STANDBY false
- # define CONF_CLOCK_GCLK_2_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_OSC32K
- # define CONF_CLOCK_GCLK_2_PRESCALER 32
- # define CONF_CLOCK_GCLK_2_OUTPUT_ENABLE false
- /* Configure GCLK generator 3 */
- # define CONF_CLOCK_GCLK_3_ENABLE false
- # define CONF_CLOCK_GCLK_3_RUN_IN_STANDBY false
- # define CONF_CLOCK_GCLK_3_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_OSC8M
- # define CONF_CLOCK_GCLK_3_PRESCALER 1
- # define CONF_CLOCK_GCLK_3_OUTPUT_ENABLE false
- /* Configure GCLK generator 4 */
- # define CONF_CLOCK_GCLK_4_ENABLE false
- # define CONF_CLOCK_GCLK_4_RUN_IN_STANDBY false
- # define CONF_CLOCK_GCLK_4_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_OSC8M
- # define CONF_CLOCK_GCLK_4_PRESCALER 1
- # define CONF_CLOCK_GCLK_4_OUTPUT_ENABLE false
- /* Configure GCLK generator 5 */
- # define CONF_CLOCK_GCLK_5_ENABLE false
- # define CONF_CLOCK_GCLK_5_RUN_IN_STANDBY false
- # define CONF_CLOCK_GCLK_5_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_OSC8M
- # define CONF_CLOCK_GCLK_5_PRESCALER 1
- # define CONF_CLOCK_GCLK_5_OUTPUT_ENABLE false
- /* Configure GCLK generator 6 */
- # define CONF_CLOCK_GCLK_6_ENABLE false
- # define CONF_CLOCK_GCLK_6_RUN_IN_STANDBY false
- # define CONF_CLOCK_GCLK_6_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_OSC8M
- # define CONF_CLOCK_GCLK_6_PRESCALER 1
- # define CONF_CLOCK_GCLK_6_OUTPUT_ENABLE false
- /* Configure GCLK generator 7 */
- # define CONF_CLOCK_GCLK_7_ENABLE false
- # define CONF_CLOCK_GCLK_7_RUN_IN_STANDBY false
- # define CONF_CLOCK_GCLK_7_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_OSC8M
- # define CONF_CLOCK_GCLK_7_PRESCALER 1
- # define CONF_CLOCK_GCLK_7_OUTPUT_ENABLE false
- #endif /* CONF_CLOCKS_H_INCLUDED */
|