rt-thread/bsp/stm32f7-disco/Libraries/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h

/**
  ******************************************************************************
  * @file    stm32f7xx_hal_tim.h
  * @author  MCD Application Team
  * @brief   Header file of TIM HAL module.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */ 

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F7xx_HAL_TIM_H
#define __STM32F7xx_HAL_TIM_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32f7xx_hal_def.h"

/** @addtogroup STM32F7xx_HAL_Driver
  * @{
  */

/** @addtogroup TIM
  * @{
  */

/* Exported types ------------------------------------------------------------*/
/** @defgroup TIM_Exported_Types TIM Exported Types
  * @{
  */
  
/** 
  * @brief  TIM Time base Configuration Structure definition  
  */
typedef struct
{
  uint32_t Prescaler;         /*!< Specifies the prescaler value used to divide the TIM clock.
                                   This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */

  uint32_t CounterMode;       /*!< Specifies the counter mode.
                                   This parameter can be a value of @ref TIM_Counter_Mode */

  uint32_t Period;            /*!< Specifies the period value to be loaded into the active
                                   Auto-Reload Register at the next update event.
                                   This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF.  */

  uint32_t ClockDivision;     /*!< Specifies the clock division.
                                   This parameter can be a value of @ref TIM_ClockDivision */

  uint32_t RepetitionCounter;  /*!< Specifies the repetition counter value. Each time the RCR down-counter
                                    reaches zero, an update event is generated and counting restarts
                                    from the RCR value (N).
                                    This means in PWM mode that (N+1) corresponds to:
                                        - the number of PWM periods in edge-aligned mode
                                        - the number of half PWM period in center-aligned mode
                                     This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. 
                                     @note This parameter is valid only for TIM1 and TIM8. */

  uint32_t AutoReloadPreload;  /*!< Specifies the auto-reload preload.
                                   This parameter can be a value of @ref TIM_AutoReloadPreload */

} TIM_Base_InitTypeDef;

/** 
  * @brief  TIM Output Compare Configuration Structure definition  
  */

typedef struct
{
  uint32_t OCMode;        /*!< Specifies the TIM mode.
                               This parameter can be a value of @ref TIMEx_Output_Compare_and_PWM_modes */

  uint32_t Pulse;         /*!< Specifies the pulse value to be loaded into the Capture Compare Register. 
                               This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */

  uint32_t OCPolarity;    /*!< Specifies the output polarity.
                               This parameter can be a value of @ref TIM_Output_Compare_Polarity */

  uint32_t OCNPolarity;   /*!< Specifies the complementary output polarity.
                               This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
                               @note This parameter is valid only for TIM1 and TIM8. */
  
  uint32_t OCFastMode;   /*!< Specifies the Fast mode state.
                               This parameter can be a value of @ref TIM_Output_Fast_State
                               @note This parameter is valid only in PWM1 and PWM2 mode. */


  uint32_t OCIdleState;   /*!< Specifies the TIM Output Compare pin state during Idle state.
                               This parameter can be a value of @ref TIM_Output_Compare_Idle_State
                               @note This parameter is valid only for TIM1 and TIM8. */

  uint32_t OCNIdleState;  /*!< Specifies the TIM Output Compare pin state during Idle state.
                               This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
                               @note This parameter is valid only for TIM1 and TIM8. */
} TIM_OC_InitTypeDef;  

/** 
  * @brief  TIM One Pulse Mode Configuration Structure definition  
  */
typedef struct
{
  uint32_t OCMode;        /*!< Specifies the TIM mode.
                               This parameter can be a value of @ref TIMEx_Output_Compare_and_PWM_modes */

  uint32_t Pulse;         /*!< Specifies the pulse value to be loaded into the Capture Compare Register. 
                               This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */

  uint32_t OCPolarity;    /*!< Specifies the output polarity.
                               This parameter can be a value of @ref TIM_Output_Compare_Polarity */

  uint32_t OCNPolarity;   /*!< Specifies the complementary output polarity.
                               This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
                               @note This parameter is valid only for TIM1 and TIM8. */

  uint32_t OCIdleState;   /*!< Specifies the TIM Output Compare pin state during Idle state.
                               This parameter can be a value of @ref TIM_Output_Compare_Idle_State
                               @note This parameter is valid only for TIM1 and TIM8. */

  uint32_t OCNIdleState;  /*!< Specifies the TIM Output Compare pin state during Idle state.
                               This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
                               @note This parameter is valid only for TIM1 and TIM8. */

  uint32_t ICPolarity;    /*!< Specifies the active edge of the input signal.
                               This parameter can be a value of @ref TIM_Input_Capture_Polarity */

  uint32_t ICSelection;   /*!< Specifies the input.
                              This parameter can be a value of @ref TIM_Input_Capture_Selection */

  uint32_t ICFilter;      /*!< Specifies the input capture filter.
                              This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */  
} TIM_OnePulse_InitTypeDef;  


/** 
  * @brief  TIM Input Capture Configuration Structure definition  
  */

typedef struct
{
  uint32_t  ICPolarity;   /*!< Specifies the active edge of the input signal.
                               This parameter can be a value of @ref TIM_Input_Capture_Polarity */

  uint32_t ICSelection;  /*!< Specifies the input.
                              This parameter can be a value of @ref TIM_Input_Capture_Selection */

  uint32_t ICPrescaler;  /*!< Specifies the Input Capture Prescaler.
                              This parameter can be a value of @ref TIM_Input_Capture_Prescaler */

  uint32_t ICFilter;     /*!< Specifies the input capture filter.
                              This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
} TIM_IC_InitTypeDef;

/** 
  * @brief  TIM Encoder Configuration Structure definition  
  */

typedef struct
{
  uint32_t EncoderMode;   /*!< Specifies the active edge of the input signal.
                               This parameter can be a value of @ref TIM_Encoder_Mode */
                                  
  uint32_t IC1Polarity;   /*!< Specifies the active edge of the input signal.
                               This parameter can be a value of @ref TIM_Input_Capture_Polarity */

  uint32_t IC1Selection;  /*!< Specifies the input.
                               This parameter can be a value of @ref TIM_Input_Capture_Selection */

  uint32_t IC1Prescaler;  /*!< Specifies the Input Capture Prescaler.
                               This parameter can be a value of @ref TIM_Input_Capture_Prescaler */

  uint32_t IC1Filter;     /*!< Specifies the input capture filter.
                               This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
                                  
  uint32_t IC2Polarity;   /*!< Specifies the active edge of the input signal.
                               This parameter can be a value of @ref TIM_Input_Capture_Polarity */

  uint32_t IC2Selection;  /*!< Specifies the input.
                              This parameter can be a value of @ref TIM_Input_Capture_Selection */

  uint32_t IC2Prescaler;  /*!< Specifies the Input Capture Prescaler.
                               This parameter can be a value of @ref TIM_Input_Capture_Prescaler */

  uint32_t IC2Filter;     /*!< Specifies the input capture filter.
                               This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
} TIM_Encoder_InitTypeDef;

/** 
  * @brief  Clock Configuration Handle Structure definition  
  */ 
typedef struct
{
  uint32_t ClockSource;     /*!< TIM clock sources. 
                                 This parameter can be a value of @ref TIM_Clock_Source */ 
  uint32_t ClockPolarity;   /*!< TIM clock polarity. 
                                 This parameter can be a value of @ref TIM_Clock_Polarity */
  uint32_t ClockPrescaler;  /*!< TIM clock prescaler. 
                                 This parameter can be a value of @ref TIM_Clock_Prescaler */
  uint32_t ClockFilter;    /*!< TIM clock filter. 
                                This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
}TIM_ClockConfigTypeDef;

/** 
  * @brief  Clear Input Configuration Handle Structure definition  
  */ 
typedef struct
{ 
  uint32_t ClearInputState;      /*!< TIM clear Input state. 
                                      This parameter can be ENABLE or DISABLE */  
  uint32_t ClearInputSource;     /*!< TIM clear Input sources. 
                                      This parameter can be a value of @ref TIMEx_ClearInput_Source */ 
  uint32_t ClearInputPolarity;   /*!< TIM Clear Input polarity. 
                                      This parameter can be a value of @ref TIM_ClearInput_Polarity */
  uint32_t ClearInputPrescaler;  /*!< TIM Clear Input prescaler. 
                                      This parameter can be a value of @ref TIM_ClearInput_Prescaler */
  uint32_t ClearInputFilter;    /*!< TIM Clear Input filter. 
                                     This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
}TIM_ClearInputConfigTypeDef;

/** 
  * @brief  TIM Slave configuration Structure definition  
  */ 
typedef struct {
  uint32_t  SlaveMode;         /*!< Slave mode selection 
                                  This parameter can be a value of @ref TIMEx_Slave_Mode */ 
  uint32_t  InputTrigger;      /*!< Input Trigger source 
                                  This parameter can be a value of @ref TIM_Trigger_Selection */
  uint32_t  TriggerPolarity;   /*!< Input Trigger polarity 
                                  This parameter can be a value of @ref TIM_Trigger_Polarity */
  uint32_t  TriggerPrescaler;  /*!< Input trigger prescaler 
                                  This parameter can be a value of @ref TIM_Trigger_Prescaler */
  uint32_t  TriggerFilter;     /*!< Input trigger filter 
                                  This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */  

}TIM_SlaveConfigTypeDef;

/** 
  * @brief  HAL State structures definition  
  */ 
typedef enum
{
  HAL_TIM_STATE_RESET             = 0x00U,    /*!< Peripheral not yet initialized or disabled  */
  HAL_TIM_STATE_READY             = 0x01U,    /*!< Peripheral Initialized and ready for use    */
  HAL_TIM_STATE_BUSY              = 0x02U,    /*!< An internal process is ongoing              */
  HAL_TIM_STATE_TIMEOUT           = 0x03U,    /*!< Timeout state                               */
  HAL_TIM_STATE_ERROR             = 0x04U     /*!< Reception process is ongoing                */
}HAL_TIM_StateTypeDef;

/** 
  * @brief  HAL Active channel structures definition  
  */ 
typedef enum
{
  HAL_TIM_ACTIVE_CHANNEL_1        = 0x01U,    /*!< The active channel is 1     */
  HAL_TIM_ACTIVE_CHANNEL_2        = 0x02U,    /*!< The active channel is 2     */
  HAL_TIM_ACTIVE_CHANNEL_3        = 0x04U,    /*!< The active channel is 3     */
  HAL_TIM_ACTIVE_CHANNEL_4        = 0x08U,    /*!< The active channel is 4     */
  HAL_TIM_ACTIVE_CHANNEL_CLEARED  = 0x00U     /*!< All active channels cleared */
}HAL_TIM_ActiveChannel;

/** 
  * @brief  TIM Time Base Handle Structure definition  
  */ 
typedef struct __TIM_HandleTypeDef
{
  TIM_TypeDef                 *Instance;     /*!< Register base address             */
  TIM_Base_InitTypeDef        Init;          /*!< TIM Time Base required parameters */
  HAL_TIM_ActiveChannel       Channel;       /*!< Active channel                    */
  DMA_HandleTypeDef           *hdma[7];      /*!< DMA Handlers array
                                             This array is accessed by a @ref DMA_Handle_index */
  HAL_LockTypeDef             Lock;          /*!< Locking object                    */
  __IO HAL_TIM_StateTypeDef   State;         /*!< TIM operation state               */

#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
  void  (* Base_MspInitCallback)         (struct __TIM_HandleTypeDef *htim);  /*!< TIM Base Msp Init Callback          */
  void  (* Base_MspDeInitCallback)       (struct __TIM_HandleTypeDef *htim);  /*!< TIM Base Msp DeInit Callback        */
  void  (* IC_MspInitCallback)           (struct __TIM_HandleTypeDef *htim);  /*!< TIM IC Msp Init Callback            */
  void  (* IC_MspDeInitCallback)         (struct __TIM_HandleTypeDef *htim);  /*!< TIM IC Msp DeInit Callback          */
  void  (* OC_MspInitCallback)           (struct __TIM_HandleTypeDef *htim);  /*!< TIM OC Msp Init Callback            */
  void  (* OC_MspDeInitCallback)         (struct __TIM_HandleTypeDef *htim);  /*!< TIM OC Msp DeInit Callback          */
  void  (* PWM_MspInitCallback)          (struct __TIM_HandleTypeDef *htim);  /*!< TIM PWM Msp Init Callback           */
  void  (* PWM_MspDeInitCallback)        (struct __TIM_HandleTypeDef *htim);  /*!< TIM PWM Msp DeInit Callback         */
  void  (* OnePulse_MspInitCallback)     (struct __TIM_HandleTypeDef *htim);  /*!< TIM One Pulse Msp Init Callback     */
  void  (* OnePulse_MspDeInitCallback)   (struct __TIM_HandleTypeDef *htim);  /*!< TIM One Pulse Msp DeInit Callback   */
  void  (* Encoder_MspInitCallback)      (struct __TIM_HandleTypeDef *htim);  /*!< TIM Encoder Msp Init Callback       */
  void  (* Encoder_MspDeInitCallback)    (struct __TIM_HandleTypeDef *htim);  /*!< TIM Encoder Msp DeInit Callback     */
  void  (* HallSensor_MspInitCallback)   (struct __TIM_HandleTypeDef *htim);  /*!< TIM Hall Sensor Msp Init Callback   */
  void  (* HallSensor_MspDeInitCallback) (struct __TIM_HandleTypeDef *htim);  /*!< TIM Hall Sensor Msp DeInit Callback */

  void  (* PeriodElapsedCallback)        (struct __TIM_HandleTypeDef *htim);  /*!< TIM Period Elapsed Callback               */
  void  (* TriggerCallback)              (struct __TIM_HandleTypeDef *htim);  /*!< TIM Trigger Callback                      */
  void  (* IC_CaptureCallback)           (struct __TIM_HandleTypeDef *htim);  /*!< TIM Input Capture Callback                */
  void  (* OC_DelayElapsedCallback)      (struct __TIM_HandleTypeDef *htim);  /*!< TIM Output Compare Delay Elapsed Callback */
  void  (* PWM_PulseFinishedCallback)    (struct __TIM_HandleTypeDef *htim);  /*!< TIM PWM Pulse Finished Callback           */
  void  (* ErrorCallback)                (struct __TIM_HandleTypeDef *htim);  /*!< TIM Error Callback                        */
  void  (* CommutationCallback)          (struct __TIM_HandleTypeDef *htim);  /*!< TIM Commutation Callback                  */
  void  (* BreakCallback)                (struct __TIM_HandleTypeDef *htim);  /*!< TIM Break Callback                        */

#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */

}TIM_HandleTypeDef;

#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
/**
  * @brief  HAL TIM Callback ID enumeration definition
  */
typedef enum
{
  HAL_TIM_BASE_MSPINIT_CB_ID          = 0x00U,    /*!< TIM Base MspInit Callback ID        */
  HAL_TIM_BASE_MSPDEINIT_CB_ID        = 0x01U,    /*!< TIM Base MspDeInit Callback ID      */
  HAL_TIM_IC_MSPINIT_CB_ID            = 0x02U,    /*!< TIM IC MspInit Callback ID          */
  HAL_TIM_IC_MSPDEINIT_CB_ID          = 0x03U,    /*!< TIM IC MspDeInit Callback ID        */
  HAL_TIM_OC_MSPINIT_CB_ID            = 0x04U,    /*!< TIM OC MspInit Callback ID          */
  HAL_TIM_OC_MSPDEINIT_CB_ID          = 0x05U,    /*!< TIM OC MspDeInit Callback ID        */
  HAL_TIM_PWM_MSPINIT_CB_ID           = 0x06U,    /*!< TIM PWM MspInit Callback ID         */
  HAL_TIM_PWM_MSPDEINIT_CB_ID         = 0x07U,    /*!< TIM PWM MspDeInit Callback ID       */
  HAL_TIM_ONE_PULSE_MSPINIT_CB_ID     = 0x08U,    /*!< TIM One Pulse MspInit Callback ID   */
  HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID   = 0x09U,    /*!< TIM One Pulse MspDeInit Callback ID */
  HAL_TIM_ENCODER_MSPINIT_CB_ID       = 0x0AU,    /*!< TIM Encoder MspInit Callback ID     */
  HAL_TIM_ENCODER_MSPDEINIT_CB_ID     = 0x0BU,    /*!< TIM Encoder MspDeInit Callback ID   */
  HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID   = 0x0CU,    /*!< TIM Encoder MspDeInit Callback ID   */
  HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU,    /*!< TIM Encoder MspDeInit Callback ID   */

  HAL_TIM_PERIOD_ELAPSED_CB_ID        = 0x0EU,    /*!< TIM Period Elapsed Callback ID               */
  HAL_TIM_TRIGGER_CB_ID               = 0x0FU,    /*!< TIM Trigger Callback ID                      */
  HAL_TIM_IC_CAPTURE_CB_ID            = 0x10U,    /*!< TIM Input Capture Callback ID                */
  HAL_TIM_OC_DELAY_ELAPSED_CB_ID      = 0x11U,    /*!< TIM Output Compare Delay Elapsed Callback ID */
  HAL_TIM_PWM_PULSE_FINISHED_CB_ID    = 0x12U,    /*!< TIM PWM Pulse Finished Callback ID           */
  HAL_TIM_ERROR_CB_ID                 = 0x13U,    /*!< TIM Error Callback ID                        */
  HAL_TIM_COMMUTATION_CB_ID           = 0x14U,    /*!< TIM Commutation Callback ID                  */
  HAL_TIM_BREAK_CB_ID                 = 0x15U     /*!< TIM Break Callback ID                        */

}HAL_TIM_CallbackIDTypeDef;

/**
  * @brief  HAL TIM Callback pointer definition
  */
typedef  void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef * htim); /*!< pointer to the TIM callback function */

#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */
/**
  * @}
  */

/* Exported constants --------------------------------------------------------*/
/** @defgroup TIM_Exported_Constants  TIM Exported Constants
  * @{
  */

/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel Polarity
  * @{
  */
#define  TIM_INPUTCHANNELPOLARITY_RISING      ((uint32_t)0x00000000U)            /*!< Polarity for TIx source */
#define  TIM_INPUTCHANNELPOLARITY_FALLING     (TIM_CCER_CC1P)                   /*!< Polarity for TIx source */
#define  TIM_INPUTCHANNELPOLARITY_BOTHEDGE    (TIM_CCER_CC1P | TIM_CCER_CC1NP)  /*!< Polarity for TIx source */
/**
  * @}
  */

/** @defgroup TIM_ETR_Polarity  TIM ETR Polarity
  * @{
  */
#define TIM_ETRPOLARITY_INVERTED              (TIM_SMCR_ETP)                    /*!< Polarity for ETR source */
#define TIM_ETRPOLARITY_NONINVERTED           ((uint32_t)0x0000U)                /*!< Polarity for ETR source */
/**
  * @}
  */

/** @defgroup TIM_ETR_Prescaler  TIM ETR Prescaler
  * @{
  */
#define TIM_ETRPRESCALER_DIV1                 ((uint32_t)0x0000U)                /*!< No prescaler is used */
#define TIM_ETRPRESCALER_DIV2                 (TIM_SMCR_ETPS_0)                 /*!< ETR input source is divided by 2 */
#define TIM_ETRPRESCALER_DIV4                 (TIM_SMCR_ETPS_1)                 /*!< ETR input source is divided by 4 */
#define TIM_ETRPRESCALER_DIV8                 (TIM_SMCR_ETPS)                   /*!< ETR input source is divided by 8 */
/**
  * @}
  */

/** @defgroup TIM_Counter_Mode  TIM Counter Mode
  * @{
  */
#define TIM_COUNTERMODE_UP                 ((uint32_t)0x0000U)
#define TIM_COUNTERMODE_DOWN               TIM_CR1_DIR
#define TIM_COUNTERMODE_CENTERALIGNED1     TIM_CR1_CMS_0
#define TIM_COUNTERMODE_CENTERALIGNED2     TIM_CR1_CMS_1
#define TIM_COUNTERMODE_CENTERALIGNED3     TIM_CR1_CMS
/**
  * @}
  */

/** @defgroup TIM_ClockDivision TIM Clock Division
  * @{
  */
#define TIM_CLOCKDIVISION_DIV1                       ((uint32_t)0x0000U)
#define TIM_CLOCKDIVISION_DIV2                       (TIM_CR1_CKD_0)
#define TIM_CLOCKDIVISION_DIV4                       (TIM_CR1_CKD_1)
/**
  * @}
  */

/** @defgroup TIM_Output_Compare_State TIM Output Compare State
  * @{
  */
#define TIM_OUTPUTSTATE_DISABLE            ((uint32_t)0x0000U)
#define TIM_OUTPUTSTATE_ENABLE             (TIM_CCER_CC1E)

/**
  * @}
  */

/** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload
  * @{
  */
#define TIM_AUTORELOAD_PRELOAD_DISABLE                ((uint32_t)0x0000)   /*!< TIMx_ARR register is not buffered */
#define TIM_AUTORELOAD_PRELOAD_ENABLE                 (TIM_CR1_ARPE)       /*!< TIMx_ARR register is buffered */

/**
  * @}
  */

/** @defgroup TIM_Output_Fast_State  TIM Output Fast State 
  * @{
  */
#define TIM_OCFAST_DISABLE                ((uint32_t)0x0000U)
#define TIM_OCFAST_ENABLE                 (TIM_CCMR1_OC1FE)
/**
  * @}
  */

/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State
  * @{
  */
#define TIM_OUTPUTNSTATE_DISABLE            ((uint32_t)0x0000U)
#define TIM_OUTPUTNSTATE_ENABLE             (TIM_CCER_CC1NE)
/**
  * @}
  */ 

/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity 
  * @{
  */
#define TIM_OCPOLARITY_HIGH                ((uint32_t)0x0000U)
#define TIM_OCPOLARITY_LOW                 (TIM_CCER_CC1P)
/**
  * @}
  */

/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity
  * @{
  */
#define TIM_OCNPOLARITY_HIGH               ((uint32_t)0x0000U)
#define TIM_OCNPOLARITY_LOW                (TIM_CCER_CC1NP)
/**
  * @}
  */

/** @defgroup TIM_Output_Compare_Idle_State  TIM Output Compare Idle State
  * @{
  */
#define TIM_OCIDLESTATE_SET                (TIM_CR2_OIS1)
#define TIM_OCIDLESTATE_RESET              ((uint32_t)0x0000U)
/**
  * @}
  */ 

/** @defgroup TIM_Output_Compare_N_Idle_State  TIM Output Compare N Idle State
  * @{
  */
#define TIM_OCNIDLESTATE_SET               (TIM_CR2_OIS1N)
#define TIM_OCNIDLESTATE_RESET             ((uint32_t)0x0000U)
/**
  * @}
  */ 

/** @defgroup TIM_Input_Capture_Polarity  TIM Input Capture Polarity 
  * @{
  */
#define  TIM_ICPOLARITY_RISING             TIM_INPUTCHANNELPOLARITY_RISING
#define  TIM_ICPOLARITY_FALLING            TIM_INPUTCHANNELPOLARITY_FALLING
#define  TIM_ICPOLARITY_BOTHEDGE           TIM_INPUTCHANNELPOLARITY_BOTHEDGE
/**
  * @}
  */

/** @defgroup TIM_Input_Capture_Selection  TIM Input Capture Selection
  * @{
  */
#define TIM_ICSELECTION_DIRECTTI           (TIM_CCMR1_CC1S_0)   /*!< TIM Input 1, 2, 3 or 4 is selected to be 
                                                                     connected to IC1, IC2, IC3 or IC4, respectively */
#define TIM_ICSELECTION_INDIRECTTI         (TIM_CCMR1_CC1S_1)   /*!< TIM Input 1, 2, 3 or 4 is selected to be
                                                                     connected to IC2, IC1, IC4 or IC3, respectively */
#define TIM_ICSELECTION_TRC                (TIM_CCMR1_CC1S)     /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */

/**
  * @}
  */

/** @defgroup TIM_Input_Capture_Prescaler  TIM Input Capture Prescaler
  * @{
  */
#define TIM_ICPSC_DIV1                     ((uint32_t)0x0000U)       /*!< Capture performed each time an edge is detected on the capture input */
#define TIM_ICPSC_DIV2                     (TIM_CCMR1_IC1PSC_0)     /*!< Capture performed once every 2 events */
#define TIM_ICPSC_DIV4                     (TIM_CCMR1_IC1PSC_1)     /*!< Capture performed once every 4 events */
#define TIM_ICPSC_DIV8                     (TIM_CCMR1_IC1PSC)       /*!< Capture performed once every 8 events */
/**
  * @}
  */ 

/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode
  * @{
  */
#define TIM_OPMODE_SINGLE                  (TIM_CR1_OPM)
#define TIM_OPMODE_REPETITIVE              ((uint32_t)0x0000U)
/**
  * @}
  */

/** @defgroup TIM_Encoder_Mode TIM Encoder Mode
  * @{
  */
#define TIM_ENCODERMODE_TI1                (TIM_SMCR_SMS_0)
#define TIM_ENCODERMODE_TI2                (TIM_SMCR_SMS_1)
#define TIM_ENCODERMODE_TI12               (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0)

/**
  * @}
  */

/** @defgroup TIM_Interrupt_definition  TIM Interrupt definition
  * @{
  */ 
#define TIM_IT_UPDATE           (TIM_DIER_UIE)
#define TIM_IT_CC1              (TIM_DIER_CC1IE)
#define TIM_IT_CC2              (TIM_DIER_CC2IE)
#define TIM_IT_CC3              (TIM_DIER_CC3IE)
#define TIM_IT_CC4              (TIM_DIER_CC4IE)
#define TIM_IT_COM              (TIM_DIER_COMIE)
#define TIM_IT_TRIGGER          (TIM_DIER_TIE)
#define TIM_IT_BREAK            (TIM_DIER_BIE)
/**
  * @}
  */
  
/** @defgroup TIM_Commutation_Source  TIM Commutation Source 
  * @{
  */  
#define TIM_COMMUTATION_TRGI              (TIM_CR2_CCUS)
#define TIM_COMMUTATION_SOFTWARE          ((uint32_t)0x0000U)
/**
  * @}
  */

/** @defgroup TIM_DMA_sources  TIM DMA sources
  * @{
  */
#define TIM_DMA_UPDATE                     (TIM_DIER_UDE)
#define TIM_DMA_CC1                        (TIM_DIER_CC1DE)
#define TIM_DMA_CC2                        (TIM_DIER_CC2DE)
#define TIM_DMA_CC3                        (TIM_DIER_CC3DE)
#define TIM_DMA_CC4                        (TIM_DIER_CC4DE)
#define TIM_DMA_COM                        (TIM_DIER_COMDE)
#define TIM_DMA_TRIGGER                    (TIM_DIER_TDE)
/**
  * @}
  */

/** @defgroup TIM_Event_Source  TIM Event Source 
  * @{
  */
#define TIM_EVENTSOURCE_UPDATE              TIM_EGR_UG  
#define TIM_EVENTSOURCE_CC1                 TIM_EGR_CC1G
#define TIM_EVENTSOURCE_CC2                 TIM_EGR_CC2G
#define TIM_EVENTSOURCE_CC3                 TIM_EGR_CC3G
#define TIM_EVENTSOURCE_CC4                 TIM_EGR_CC4G
#define TIM_EVENTSOURCE_COM                 TIM_EGR_COMG
#define TIM_EVENTSOURCE_TRIGGER             TIM_EGR_TG  
#define TIM_EVENTSOURCE_BREAK               TIM_EGR_BG 
#define TIM_EVENTSOURCE_BREAK2              TIM_EGR_B2G   
/**
  * @}
  */

/** @defgroup TIM_Flag_definition  TIM Flag definition
  * @{
  */
#define TIM_FLAG_UPDATE                    (TIM_SR_UIF)
#define TIM_FLAG_CC1                       (TIM_SR_CC1IF)
#define TIM_FLAG_CC2                       (TIM_SR_CC2IF)
#define TIM_FLAG_CC3                       (TIM_SR_CC3IF)
#define TIM_FLAG_CC4                       (TIM_SR_CC4IF)
#define TIM_FLAG_COM                       (TIM_SR_COMIF)
#define TIM_FLAG_TRIGGER                   (TIM_SR_TIF)
#define TIM_FLAG_BREAK                     (TIM_SR_BIF)
#define TIM_FLAG_BREAK2                    (TIM_SR_B2IF)
#define TIM_FLAG_CC1OF                     (TIM_SR_CC1OF)
#define TIM_FLAG_CC2OF                     (TIM_SR_CC2OF)
#define TIM_FLAG_CC3OF                     (TIM_SR_CC3OF)
#define TIM_FLAG_CC4OF                     (TIM_SR_CC4OF)
/**
  * @}
  */

/** @defgroup TIM_Clock_Source  TIM Clock Source
  * @{
  */
#define	TIM_CLOCKSOURCE_ETRMODE2    (TIM_SMCR_ETPS_1) 
#define	TIM_CLOCKSOURCE_INTERNAL    (TIM_SMCR_ETPS_0) 
#define	TIM_CLOCKSOURCE_ITR0        ((uint32_t)0x0000U)
#define	TIM_CLOCKSOURCE_ITR1        (TIM_SMCR_TS_0)
#define	TIM_CLOCKSOURCE_ITR2        (TIM_SMCR_TS_1)
#define	TIM_CLOCKSOURCE_ITR3        (TIM_SMCR_TS_0 | TIM_SMCR_TS_1)
#define	TIM_CLOCKSOURCE_TI1ED       (TIM_SMCR_TS_2)
#define	TIM_CLOCKSOURCE_TI1         (TIM_SMCR_TS_0 | TIM_SMCR_TS_2)
#define	TIM_CLOCKSOURCE_TI2         (TIM_SMCR_TS_1 | TIM_SMCR_TS_2)
#define	TIM_CLOCKSOURCE_ETRMODE1    (TIM_SMCR_TS)
/**
  * @}
  */

/** @defgroup TIM_Clock_Polarity  TIM Clock Polarity
  * @{
  */
#define TIM_CLOCKPOLARITY_INVERTED           TIM_ETRPOLARITY_INVERTED          /*!< Polarity for ETRx clock sources */ 
#define TIM_CLOCKPOLARITY_NONINVERTED        TIM_ETRPOLARITY_NONINVERTED       /*!< Polarity for ETRx clock sources */ 
#define TIM_CLOCKPOLARITY_RISING             TIM_INPUTCHANNELPOLARITY_RISING   /*!< Polarity for TIx clock sources */ 
#define TIM_CLOCKPOLARITY_FALLING            TIM_INPUTCHANNELPOLARITY_FALLING   /*!< Polarity for TIx clock sources */ 
#define TIM_CLOCKPOLARITY_BOTHEDGE           TIM_INPUTCHANNELPOLARITY_BOTHEDGE  /*!< Polarity for TIx clock sources */ 
/**
  * @}
  */

/** @defgroup TIM_Clock_Prescaler  TIM Clock Prescaler
  * @{
  */
#define TIM_CLOCKPRESCALER_DIV1              TIM_ETRPRESCALER_DIV1     /*!< No prescaler is used */
#define TIM_CLOCKPRESCALER_DIV2              TIM_ETRPRESCALER_DIV2     /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */
#define TIM_CLOCKPRESCALER_DIV4              TIM_ETRPRESCALER_DIV4     /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */
#define TIM_CLOCKPRESCALER_DIV8              TIM_ETRPRESCALER_DIV8     /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */
/**
  * @}
  */

/** @defgroup TIM_ClearInput_Polarity  TIM Clear Input Polarity
  * @{
  */
#define TIM_CLEARINPUTPOLARITY_INVERTED           TIM_ETRPOLARITY_INVERTED                    /*!< Polarity for ETRx pin */ 
#define TIM_CLEARINPUTPOLARITY_NONINVERTED        TIM_ETRPOLARITY_NONINVERTED                 /*!< Polarity for ETRx pin */ 
/**
  * @}
  */

/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler
  * @{
  */
#define TIM_CLEARINPUTPRESCALER_DIV1                    TIM_ETRPRESCALER_DIV1      /*!< No prescaler is used */
#define TIM_CLEARINPUTPRESCALER_DIV2                    TIM_ETRPRESCALER_DIV2      /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */
#define TIM_CLEARINPUTPRESCALER_DIV4                    TIM_ETRPRESCALER_DIV4      /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */
#define TIM_CLEARINPUTPRESCALER_DIV8                    TIM_ETRPRESCALER_DIV8        /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */
/**
  * @}
  */

/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state
  * @{
  */  
#define TIM_OSSR_ENABLE 	      (TIM_BDTR_OSSR)
#define TIM_OSSR_DISABLE          ((uint32_t)0x0000U)
/**
  * @}
  */
  
/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state
  * @{
  */
#define TIM_OSSI_ENABLE	 	    (TIM_BDTR_OSSI)
#define TIM_OSSI_DISABLE            ((uint32_t)0x0000U)
/**
  * @}
  */
  
/** @defgroup TIM_Lock_level  TIM Lock level
  * @{
  */
#define TIM_LOCKLEVEL_OFF	   ((uint32_t)0x0000U)
#define TIM_LOCKLEVEL_1            (TIM_BDTR_LOCK_0)
#define TIM_LOCKLEVEL_2            (TIM_BDTR_LOCK_1)
#define TIM_LOCKLEVEL_3            (TIM_BDTR_LOCK)
/**
  * @}
  */  
/** @defgroup TIM_Break_Input_enable_disable  TIM Break Input State
  * @{
  */                         
#define TIM_BREAK_ENABLE          (TIM_BDTR_BKE)
#define TIM_BREAK_DISABLE         ((uint32_t)0x0000U)
/**
  * @}
  */
  
/** @defgroup TIM_Break_Polarity  TIM Break Polarity 
  * @{
  */
#define TIM_BREAKPOLARITY_LOW        ((uint32_t)0x0000U)
#define TIM_BREAKPOLARITY_HIGH       (TIM_BDTR_BKP)
/**
  * @}
  */
  
/** @defgroup TIM_AOE_Bit_Set_Reset  TIM AOE Bit State
  * @{
  */
#define TIM_AUTOMATICOUTPUT_ENABLE           (TIM_BDTR_AOE)
#define	TIM_AUTOMATICOUTPUT_DISABLE          ((uint32_t)0x0000U)
/**
  * @}
  */  
  
/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection
  * @{
  */  
#define	TIM_TRGO_RESET            ((uint32_t)0x0000U)             
#define	TIM_TRGO_ENABLE           (TIM_CR2_MMS_0)           
#define	TIM_TRGO_UPDATE           (TIM_CR2_MMS_1)             
#define	TIM_TRGO_OC1              ((TIM_CR2_MMS_1 | TIM_CR2_MMS_0))    
#define	TIM_TRGO_OC1REF           (TIM_CR2_MMS_2)           
#define	TIM_TRGO_OC2REF           ((TIM_CR2_MMS_2 | TIM_CR2_MMS_0))          
#define	TIM_TRGO_OC3REF           ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1))           
#define	TIM_TRGO_OC4REF           ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0))   
/**
  * @}
  */ 

/** @defgroup TIM_Master_Slave_Mode  TIM Master Slave Mode
  * @{
  */
#define TIM_MASTERSLAVEMODE_ENABLE          ((uint32_t)0x0080)
#define TIM_MASTERSLAVEMODE_DISABLE         ((uint32_t)0x0000U)
/**
  * @}
  */ 
  
/** @defgroup TIM_Trigger_Selection  TIM Trigger Selection
  * @{
  */
#define TIM_TS_ITR0                        ((uint32_t)0x0000U)
#define TIM_TS_ITR1                        ((uint32_t)0x0010U)
#define TIM_TS_ITR2                        ((uint32_t)0x0020U)
#define TIM_TS_ITR3                        ((uint32_t)0x0030U)
#define TIM_TS_TI1F_ED                     ((uint32_t)0x0040U)
#define TIM_TS_TI1FP1                      ((uint32_t)0x0050U)
#define TIM_TS_TI2FP2                      ((uint32_t)0x0060U)
#define TIM_TS_ETRF                        ((uint32_t)0x0070U)
#define TIM_TS_NONE                        ((uint32_t)0xFFFFU)
/**
  * @}
  */  

/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity
  * @{
  */
#define TIM_TRIGGERPOLARITY_INVERTED           TIM_ETRPOLARITY_INVERTED      /*!< Polarity for ETRx trigger sources */ 
#define TIM_TRIGGERPOLARITY_NONINVERTED        TIM_ETRPOLARITY_NONINVERTED   /*!< Polarity for ETRx trigger sources */ 
#define TIM_TRIGGERPOLARITY_RISING             TIM_INPUTCHANNELPOLARITY_RISING        /*!< Polarity for TIxFPx or TI1_ED trigger sources */ 
#define TIM_TRIGGERPOLARITY_FALLING            TIM_INPUTCHANNELPOLARITY_FALLING       /*!< Polarity for TIxFPx or TI1_ED trigger sources */ 
#define TIM_TRIGGERPOLARITY_BOTHEDGE           TIM_INPUTCHANNELPOLARITY_BOTHEDGE      /*!< Polarity for TIxFPx or TI1_ED trigger sources */ 
/**
  * @}
  */

/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler
  * @{
  */
#define TIM_TRIGGERPRESCALER_DIV1             TIM_ETRPRESCALER_DIV1     /*!< No prescaler is used */
#define TIM_TRIGGERPRESCALER_DIV2             TIM_ETRPRESCALER_DIV2     /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */
#define TIM_TRIGGERPRESCALER_DIV4             TIM_ETRPRESCALER_DIV4     /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */
#define TIM_TRIGGERPRESCALER_DIV8             TIM_ETRPRESCALER_DIV8     /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */
/**
  * @}
  */


/** @defgroup TIM_TI1_Selection TIM TI1 Selection
  * @{
  */
#define TIM_TI1SELECTION_CH1                ((uint32_t)0x0000U)
#define TIM_TI1SELECTION_XORCOMBINATION     (TIM_CR2_TI1S)
/**
  * @}
  */ 

/** @defgroup TIM_DMA_Base_address  TIM DMA Base address
  * @{
  */
#define TIM_DMABASE_CR1                    (0x00000000U)
#define TIM_DMABASE_CR2                    (0x00000001U)
#define TIM_DMABASE_SMCR                   (0x00000002U)
#define TIM_DMABASE_DIER                   (0x00000003U)
#define TIM_DMABASE_SR                     (0x00000004U)
#define TIM_DMABASE_EGR                    (0x00000005U)
#define TIM_DMABASE_CCMR1                  (0x00000006U)
#define TIM_DMABASE_CCMR2                  (0x00000007U)
#define TIM_DMABASE_CCER                   (0x00000008U)
#define TIM_DMABASE_CNT                    (0x00000009U)
#define TIM_DMABASE_PSC                    (0x0000000AU)
#define TIM_DMABASE_ARR                    (0x0000000BU)
#define TIM_DMABASE_RCR                    (0x0000000CU)
#define TIM_DMABASE_CCR1                   (0x0000000DU)
#define TIM_DMABASE_CCR2                   (0x0000000EU)
#define TIM_DMABASE_CCR3                   (0x0000000FU)
#define TIM_DMABASE_CCR4                   (0x00000010U)
#define TIM_DMABASE_BDTR                   (0x00000011U)
#define TIM_DMABASE_DCR                    (0x00000012U)
#define TIM_DMABASE_OR                     (0x00000013U)
/**
  * @}
  */ 

/** @defgroup TIM_DMA_Burst_Length  TIM DMA Burst Length 
  * @{
  */
#define TIM_DMABURSTLENGTH_1TRANSFER           (0x00000000U)
#define TIM_DMABURSTLENGTH_2TRANSFERS          (0x00000100U)
#define TIM_DMABURSTLENGTH_3TRANSFERS          (0x00000200U)
#define TIM_DMABURSTLENGTH_4TRANSFERS          (0x00000300U)
#define TIM_DMABURSTLENGTH_5TRANSFERS          (0x00000400U)
#define TIM_DMABURSTLENGTH_6TRANSFERS          (0x00000500U)
#define TIM_DMABURSTLENGTH_7TRANSFERS          (0x00000600U)
#define TIM_DMABURSTLENGTH_8TRANSFERS          (0x00000700U)
#define TIM_DMABURSTLENGTH_9TRANSFERS          (0x00000800U)
#define TIM_DMABURSTLENGTH_10TRANSFERS         (0x00000900U)
#define TIM_DMABURSTLENGTH_11TRANSFERS         (0x00000A00U)
#define TIM_DMABURSTLENGTH_12TRANSFERS         (0x00000B00U)
#define TIM_DMABURSTLENGTH_13TRANSFERS         (0x00000C00U)
#define TIM_DMABURSTLENGTH_14TRANSFERS         (0x00000D00U)
#define TIM_DMABURSTLENGTH_15TRANSFERS         (0x00000E00U)
#define TIM_DMABURSTLENGTH_16TRANSFERS         (0x00000F00U)
#define TIM_DMABURSTLENGTH_17TRANSFERS         (0x00001000U)
#define TIM_DMABURSTLENGTH_18TRANSFERS         (0x00001100U)
/**
  * @}
  */

/** @defgroup DMA_Handle_index  DMA Handle index
  * @{
  */
#define TIM_DMA_ID_UPDATE                ((uint16_t) 0x0U)       /*!< Index of the DMA handle used for Update DMA requests */
#define TIM_DMA_ID_CC1                   ((uint16_t) 0x1U)       /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */
#define TIM_DMA_ID_CC2                   ((uint16_t) 0x2U)       /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */
#define TIM_DMA_ID_CC3                   ((uint16_t) 0x3U)       /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */
#define TIM_DMA_ID_CC4                   ((uint16_t) 0x4U)       /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */
#define TIM_DMA_ID_COMMUTATION           ((uint16_t) 0x5U)       /*!< Index of the DMA handle used for Commutation DMA requests */
#define TIM_DMA_ID_TRIGGER               ((uint16_t) 0x6U)       /*!< Index of the DMA handle used for Trigger DMA requests */
/**
  * @}
  */ 

/** @defgroup Channel_CC_State  Channel CC State
  * @{
  */
#define TIM_CCx_ENABLE                   ((uint32_t)0x0001U)
#define TIM_CCx_DISABLE                  ((uint32_t)0x0000U)
#define TIM_CCxN_ENABLE                  ((uint32_t)0x0004U)
#define TIM_CCxN_DISABLE                 ((uint32_t)0x0000U)
/**
  * @}
  */ 

/**
  * @}
  */   
  
/* Exported macro ------------------------------------------------------------*/
/** @defgroup TIM_Exported_Macros TIM Exported Macros
  * @{
  */
/** @brief Reset TIM handle state
  * @param  __HANDLE__ TIM handle
  * @retval None
  */
#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET)

/**
  * @brief  Enable the TIM peripheral.
  * @param  __HANDLE__ TIM handle
  * @retval None
 */
#define __HAL_TIM_ENABLE(__HANDLE__)                 ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))

/**
  * @brief  Enable the TIM update source request.
  * @param  __HANDLE__ TIM handle
  * @retval None
 */
#define __HAL_TIM_URS_ENABLE(__HANDLE__)             ((__HANDLE__)->Instance->CR1|=(TIM_CR1_URS))

/**
  * @brief  Enable the TIM main Output.
  * @param  __HANDLE__ TIM handle
  * @retval None
  */
#define __HAL_TIM_MOE_ENABLE(__HANDLE__)             ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))

/**
  * @brief  Disable the TIM peripheral.
  * @param  __HANDLE__ TIM handle
  * @retval None
  */
#define __HAL_TIM_DISABLE(__HANDLE__) \
                        do { \
                          if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0) \
                          { \
                            if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0) \
                            { \
                              (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
                            } \
                          } \
                        } while(0)
                        
/**
  * @brief  Disable the TIM update source request.
  * @param  __HANDLE__ TIM handle
  * @retval None
  */
#define __HAL_TIM_URS_DISABLE(__HANDLE__)            ((__HANDLE__)->Instance->CR1&=~(TIM_CR1_URS))

/**
  * @brief  Disable the TIM main Output.
  * @param  __HANDLE__ TIM handle
  * @retval None
  * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been disabled
  */
#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
                        do { \
                          if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0) \
                          { \
                            if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0) \
                            { \
                              (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
                            } \
                          } \
                        } while(0)

/** @brief  Enable the specified TIM interrupt.
  * @param  __HANDLE__: specifies the TIM Handle.
  * @param  __INTERRUPT__: specifies the TIM interrupt source to enable.
  *          This parameter can be one of the following values:
  *            @arg TIM_IT_UPDATE: Update interrupt
  *            @arg TIM_IT_CC1:   Capture/Compare 1 interrupt
  *            @arg TIM_IT_CC2:  Capture/Compare 2 interrupt
  *            @arg TIM_IT_CC3:  Capture/Compare 3 interrupt
  *            @arg TIM_IT_CC4:  Capture/Compare 4 interrupt
  *            @arg TIM_IT_COM:   Commutation interrupt
  *            @arg TIM_IT_TRIGGER: Trigger interrupt
  *            @arg TIM_IT_BREAK: Break interrupt
  * @retval None
  */
#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__)    ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__))

/** @brief  Disable the specified TIM interrupt.
  * @param  __HANDLE__: specifies the TIM Handle.
  * @param  __INTERRUPT__: specifies the TIM interrupt source to disable.
  *          This parameter can be one of the following values:
  *            @arg TIM_IT_UPDATE: Update interrupt
  *            @arg TIM_IT_CC1:   Capture/Compare 1 interrupt
  *            @arg TIM_IT_CC2:  Capture/Compare 2 interrupt
  *            @arg TIM_IT_CC3:  Capture/Compare 3 interrupt
  *            @arg TIM_IT_CC4:  Capture/Compare 4 interrupt
  *            @arg TIM_IT_COM:   Commutation interrupt
  *            @arg TIM_IT_TRIGGER: Trigger interrupt
  *            @arg TIM_IT_BREAK: Break interrupt
  * @retval None
  */
#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))

/** @brief  Enable the specified DMA request.
  * @param  __HANDLE__: specifies the TIM Handle.
  * @param  __DMA__: specifies the TIM DMA request to enable.
  *          This parameter can be one of the following values:
  *            @arg TIM_DMA_UPDATE: Update DMA request
  *            @arg TIM_DMA_CC1:   Capture/Compare 1 DMA request
  *            @arg TIM_DMA_CC2:  Capture/Compare 2 DMA request
  *            @arg TIM_DMA_CC3:  Capture/Compare 3 DMA request
  *            @arg TIM_DMA_CC4:  Capture/Compare 4 DMA request
  *            @arg TIM_DMA_COM:   Commutation DMA request
  *            @arg TIM_DMA_TRIGGER: Trigger DMA request
  * @retval None
  */
#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__)         ((__HANDLE__)->Instance->DIER |= (__DMA__))

/** @brief  Disable the specified DMA request.
  * @param  __HANDLE__: specifies the TIM Handle.
  * @param  __DMA__: specifies the TIM DMA request to disable.
  *          This parameter can be one of the following values:
  *            @arg TIM_DMA_UPDATE: Update DMA request
  *            @arg TIM_DMA_CC1:   Capture/Compare 1 DMA request
  *            @arg TIM_DMA_CC2:  Capture/Compare 2 DMA request
  *            @arg TIM_DMA_CC3:  Capture/Compare 3 DMA request
  *            @arg TIM_DMA_CC4:  Capture/Compare 4 DMA request
  *            @arg TIM_DMA_COM:   Commutation DMA request
  *            @arg TIM_DMA_TRIGGER: Trigger DMA request
  * @retval None
  */
#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__)        ((__HANDLE__)->Instance->DIER &= ~(__DMA__))

/** @brief  Check whether the specified TIM interrupt flag is set or not.
  * @param  __HANDLE__: specifies the TIM Handle.
  * @param  __FLAG__: specifies the TIM interrupt flag to check.
  *        This parameter can be one of the following values:
  *            @arg TIM_FLAG_UPDATE: Update interrupt flag
  *            @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
  *            @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
  *            @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
  *            @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
  *            @arg TIM_FLAG_COM:  Commutation interrupt flag
  *            @arg TIM_FLAG_TRIGGER: Trigger interrupt flag
  *            @arg TIM_FLAG_BREAK: Break interrupt flag
  *            @arg TIM_FLAG_BREAK2: Break 2 interrupt flag
  *            @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
  *            @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
  *            @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
  *            @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag
  * @retval The new state of __FLAG__ (TRUE or FALSE).
  */
#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__)          (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))

/** @brief  Clear the specified TIM interrupt flag.
  * @param  __HANDLE__: specifies the TIM Handle.
  * @param  __FLAG__: specifies the TIM interrupt flag to clear.
  *        This parameter can be one of the following values:
  *            @arg TIM_FLAG_UPDATE: Update interrupt flag
  *            @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag
  *            @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag
  *            @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag
  *            @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag
  *            @arg TIM_FLAG_COM:  Commutation interrupt flag
  *            @arg TIM_FLAG_TRIGGER: Trigger interrupt flag
  *            @arg TIM_FLAG_BREAK: Break interrupt flag
  *            @arg TIM_FLAG_BREAK2: Break 2 interrupt flag
  *            @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag
  *            @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag
  *            @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag
  *            @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag
  * @retval The new state of __FLAG__ (TRUE or FALSE).
  */
#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__)        ((__HANDLE__)->Instance->SR = ~(__FLAG__))

/**
  * @brief  Check whether the specified TIM interrupt source is enabled or not.
  * @param  __HANDLE__: TIM handle
  * @param  __INTERRUPT__: specifies the TIM interrupt source to check.
  *          This parameter can be one of the following values:
  *            @arg TIM_IT_UPDATE: Update interrupt
  *            @arg TIM_IT_CC1:   Capture/Compare 1 interrupt
  *            @arg TIM_IT_CC2:  Capture/Compare 2 interrupt
  *            @arg TIM_IT_CC3:  Capture/Compare 3 interrupt
  *            @arg TIM_IT_CC4:  Capture/Compare 4 interrupt
  *            @arg TIM_IT_COM:   Commutation interrupt
  *            @arg TIM_IT_TRIGGER: Trigger interrupt
  *            @arg TIM_IT_BREAK: Break interrupt
  * @retval The state of TIM_IT (SET or RESET).
  */
#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)

/** @brief Clear the TIM interrupt pending bits.
  * @param  __HANDLE__: TIM handle
  * @param  __INTERRUPT__: specifies the interrupt pending bit to clear.
  *          This parameter can be one of the following values:
  *            @arg TIM_IT_UPDATE: Update interrupt
  *            @arg TIM_IT_CC1:   Capture/Compare 1 interrupt
  *            @arg TIM_IT_CC2:  Capture/Compare 2 interrupt
  *            @arg TIM_IT_CC3:  Capture/Compare 3 interrupt
  *            @arg TIM_IT_CC4:  Capture/Compare 4 interrupt
  *            @arg TIM_IT_COM:   Commutation interrupt
  *            @arg TIM_IT_TRIGGER: Trigger interrupt
  *            @arg TIM_IT_BREAK: Break interrupt
  * @retval None
  */
#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__)     ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))

/**
  * @brief  Indicates whether or not the TIM Counter is used as downcounter.
  * @param  __HANDLE__: TIM handle.
  * @retval False (Counter used as upcounter) or True (Counter used as downcounter)
  * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode or Encoder
mode.
  */
#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__)            (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))

/**
  * @brief  Set the TIM Prescaler on runtime.
  * @param  __HANDLE__: TIM handle.
  * @param  __PRESC__: specifies the Prescaler new value.
  * @retval None
  */
#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__)       ((__HANDLE__)->Instance->PSC = (__PRESC__))

/**
  * @brief  Set the TIM Counter Register value on runtime.
  * @param  __HANDLE__ TIM handle.
  * @param  __COUNTER__ specifies the Counter register new value.
  * @retval None
  */
#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))

/**
  * @brief  Get the TIM Counter Register value on runtime.
  * @param  __HANDLE__ TIM handle.
  * @retval 16-bit or 32-bit value of the timer counter register
  */
#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT)

/**
  * @brief  Set the TIM Autoreload Register value on runtime without calling 
  *         another time any Init function.
  * @param  __HANDLE__ TIM handle.
  * @param  __AUTORELOAD__ specifies the Counter register new value.
  * @retval 16-bit or 32-bit value of the timer auto-reload
  */
#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__)                  \
                        do{                                                  \
                            (__HANDLE__)->Instance->ARR = (__AUTORELOAD__);  \
                            (__HANDLE__)->Init.Period = (__AUTORELOAD__);    \
                          } while(0)
/**
  * @brief  Get the TIM Autoreload Register value on runtime
  * @param  __HANDLE__ TIM handle.
  * @retval None
  */
#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR)

/**
  * @brief  Set the TIM Clock Division value on runtime without calling 
  *         another time any Init function. 
  * @param  __HANDLE__ TIM handle.
  * @param  __CKD__ specifies the clock division value.
  *          This parameter can be one of the following value:
  *            @arg TIM_CLOCKDIVISION_DIV1
  *            @arg TIM_CLOCKDIVISION_DIV2
  *            @arg TIM_CLOCKDIVISION_DIV4
  * @retval None
  */
#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \
                        do{                                                             \
                              (__HANDLE__)->Instance->CR1 &= (uint16_t)(~TIM_CR1_CKD);  \
                              (__HANDLE__)->Instance->CR1 |= (__CKD__);                 \
                              (__HANDLE__)->Init.ClockDivision = (__CKD__);             \
                          } while(0)
/**
  * @brief  Get the TIM Clock Division value on runtime
  * @param  __HANDLE__ TIM handle.
  * @retval The clock division can be one of the following values:
  *            @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT
  *            @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT
  *            @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT
  */
#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)

/**
  * @brief  Set the TIM Input Capture prescaler on runtime without calling 
  *         another time HAL_TIM_IC_ConfigChannel() function.
  * @param  __HANDLE__ TIM handle.
  * @param  __CHANNEL__  TIM Channels to be configured.
  *          This parameter can be one of the following values:
  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
  * @param  __ICPSC__ specifies the Input Capture4 prescaler new value.
  *          This parameter can be one of the following values:
  *            @arg TIM_ICPSC_DIV1: no prescaler
  *            @arg TIM_ICPSC_DIV2: capture is done once every 2 events
  *            @arg TIM_ICPSC_DIV4: capture is done once every 4 events
  *            @arg TIM_ICPSC_DIV8: capture is done once every 8 events
  * @retval None
  */
#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \
                        do{                                                    \
                              TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__));  \
                              TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
                          } while(0)

/**
  * @brief  Get the TIM Input Capture prescaler on runtime
  * @param  __HANDLE__ TIM handle.
  * @param  __CHANNEL__  TIM Channels to be configured.
  *          This parameter can be one of the following values:
  *            @arg TIM_CHANNEL_1: get input capture 1 prescaler value
  *            @arg TIM_CHANNEL_2: get input capture 2 prescaler value
  *            @arg TIM_CHANNEL_3: get input capture 3 prescaler value
  *            @arg TIM_CHANNEL_4: get input capture 4 prescaler value
  * @retval The input capture prescaler can be one of the following values:
  *            @arg TIM_ICPSC_DIV1: no prescaler
  *            @arg TIM_ICPSC_DIV2: capture is done once every 2 events
  *            @arg TIM_ICPSC_DIV4: capture is done once every 4 events
  *            @arg TIM_ICPSC_DIV8: capture is done once every 8 events
  */
#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__)  \
  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
   ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8) :\
   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
   (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8)
  
/**
  * @brief  Set the TIM Capture x input polarity on runtime.
  * @param  __HANDLE__ TIM handle.
  * @param  __CHANNEL__ TIM Channels to be configured.
  *          This parameter can be one of the following values:
  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
  * @param  __POLARITY__ Polarity for TIx source   
  *            @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge
  *            @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge
  *            @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge
  * @note  The polarity TIM_INPUTCHANNELPOLARITY_BOTHEDGE is not authorized  for TIM Channel 4.     
  * @retval None
  */
#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__)                          \
                       do{                                                                            \
                           TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__));               \
                           TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \
                         }while(0)
											 
/**
  * @}
  */
/* End of exported macros ----------------------------------------------------*/

/* Include TIM HAL Extension module */
#include "stm32f7xx_hal_tim_ex.h"

/* Exported functions --------------------------------------------------------*/
/** @addtogroup TIM_Exported_Functions
  * @{
  */

/** @addtogroup TIM_Exported_Functions_Group1
  * @{
  */

/* Time Base functions ********************************************************/
HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim);
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim);
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim);
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim);
/**
  * @}
  */

/** @addtogroup TIM_Exported_Functions_Group2
  * @{
  */
/* Timer Output Compare functions **********************************************/
HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim);
void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim);
void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim);
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);

/**
  * @}
  */

/** @addtogroup TIM_Exported_Functions_Group3
  * @{
  */
/* Timer PWM functions *********************************************************/
HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim);
void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim);
void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim);

/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);

/**
  * @}
  */

/** @addtogroup TIM_Exported_Functions_Group4
  * @{
  */
/* Timer Input Capture functions ***********************************************/
HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim);
HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim);
void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim);
void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim);
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);

/**
  * @}
  */

/** @addtogroup TIM_Exported_Functions_Group5
  * @{
  */
/* Timer One Pulse functions ***************************************************/
HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode);
HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim);
void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim);
void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim);
/* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);

/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);

/**
  * @}
  */

/** @addtogroup TIM_Exported_Functions_Group6
  * @{
  */
/* Timer Encoder functions *****************************************************/
HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim,  TIM_Encoder_InitTypeDef* sConfig);
HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
 /* Blocking mode: Polling */
HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
/* Non-Blocking mode: DMA */
HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length);
HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);

/**
  * @}
  */

/** @addtogroup TIM_Exported_Functions_Group7
  * @{
  */
/* Interrupt Handler functions  **********************************************/
void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);

/**
  * @}
  */

/** @addtogroup TIM_Exported_Functions_Group8
  * @{
  */
/* Control functions  *********************************************************/
HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel,  uint32_t InputChannel);
HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel);
HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig);    
HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
                                              uint32_t  *BurstBuffer, uint32_t  BurstLength);
HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
                                              uint32_t  *BurstBuffer, uint32_t  BurstLength);
HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);

/**
  * @}
  */

/** @addtogroup TIM_Exported_Functions_Group9
  * @{
  */
/* Callback in non blocking modes (Interrupt and DMA) *************************/
void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);

/* Callbacks Register/UnRegister functions  ***********************************/
#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, pTIM_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID);
#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */

/**
  * @}
  */

/** @addtogroup TIM_Exported_Functions_Group10
  * @{
  */
/* Peripheral State functions  **************************************************/
HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim);
HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim);
HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim);
HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim);
HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim);
HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);

/**
  * @}
  */
  
/**
  * @}
  */

/* Private constants ---------------------------------------------------------*/
/** @defgroup TIM_Private_Constants TIM Private Constants
  * @{
  */
/* The counter of a timer instance is disabled only if all the CCx and CCxN
   channels have been disabled */
#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E))
#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE))
/**
  * @}
  */
/* End of private constants --------------------------------------------------*/

/* Private macros ------------------------------------------------------------*/
/** @defgroup TIM_Private_Macros TIM Private Macros
  * @{
  */

/** @defgroup TIM_IS_TIM_Definitions TIM Private macros to check input parameters
  * @{
  */
#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP)              || \
                                       ((__MODE__) == TIM_COUNTERMODE_DOWN)            || \
                                       ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1)  || \
                                       ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2)  || \
                                       ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3))

#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \
                                           ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \
                                           ((__DIV__) == TIM_CLOCKDIVISION_DIV4))

#define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \
                                            ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE))

#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \
                                      ((__STATE__) == TIM_OCFAST_ENABLE))

#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OUTPUTSTATE_DISABLE) || \
                                    ((STATE) == TIM_OUTPUTSTATE_ENABLE))

#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OUTPUTNSTATE_DISABLE) || \
                                     ((STATE) == TIM_OUTPUTNSTATE_ENABLE))

#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \
                                          ((__POLARITY__) == TIM_OCPOLARITY_LOW))

#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \
                                           ((__POLARITY__) == TIM_OCNPOLARITY_LOW))

#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \
                                        ((__STATE__) == TIM_OCIDLESTATE_RESET))

#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \
                                         ((__STATE__) == TIM_OCNIDLESTATE_RESET))

#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING)   || \
                                          ((__POLARITY__) == TIM_ICPOLARITY_FALLING)  || \
                                          ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE))

#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \
                                            ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \
                                            ((__SELECTION__) == TIM_ICSELECTION_TRC))

#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \
                                            ((__PRESCALER__) == TIM_ICPSC_DIV2) || \
                                            ((__PRESCALER__) == TIM_ICPSC_DIV4) || \
                                            ((__PRESCALER__) == TIM_ICPSC_DIV8))

#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \
                                   ((__MODE__) == TIM_OPMODE_REPETITIVE))

#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \
                                       ((__MODE__) == TIM_ENCODERMODE_TI2) || \
                                       ((__MODE__) == TIM_ENCODERMODE_TI12))   

#define IS_TIM_IT(__IT__) ((((__IT__) & 0xFFFFFF00U) == 0x00000000U) && ((__IT__) != 0x00000000U))


#define IS_TIM_GET_IT(__IT__) (((__IT__) == TIM_IT_UPDATE)  || \
                               ((__IT__) == TIM_IT_CC1)     || \
                               ((__IT__) == TIM_IT_CC2)     || \
                               ((__IT__) == TIM_IT_CC3)     || \
                               ((__IT__) == TIM_IT_CC4)     || \
                               ((__IT__) == TIM_IT_COM)     || \
                               ((__IT__) == TIM_IT_TRIGGER) || \
                               ((__IT__) == TIM_IT_BREAK))

#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U))

#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFE00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U))

#define IS_TIM_FLAG(__FLAG__) (((__FLAG__) == TIM_FLAG_UPDATE) || \
                               ((__FLAG__) == TIM_FLAG_CC1)     || \
                               ((__FLAG__) == TIM_FLAG_CC2)     || \
                               ((__FLAG__) == TIM_FLAG_CC3)     || \
                               ((__FLAG__) == TIM_FLAG_CC4)     || \
                               ((__FLAG__) == TIM_FLAG_COM)     || \
                               ((__FLAG__) == TIM_FLAG_TRIGGER) || \
                               ((__FLAG__) == TIM_FLAG_BREAK)   || \
                               ((__FLAG__) == TIM_FLAG_BREAK2)  || \
                               ((__FLAG__) == TIM_FLAG_CC1OF)   || \
                               ((__FLAG__) == TIM_FLAG_CC2OF)   || \
                               ((__FLAG__) == TIM_FLAG_CC3OF)   || \
                               ((__FLAG__) == TIM_FLAG_CC4OF))

#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \
                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \
                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0)     || \
                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1)     || \
                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2)     || \
                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3)     || \
                                       ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED)    || \
                                       ((__CLOCK__) == TIM_CLOCKSOURCE_TI1)      || \
                                       ((__CLOCK__) == TIM_CLOCKSOURCE_TI2)      || \
                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1))

#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED)    || \
                                        ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \
                                        ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING)      || \
                                        ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING)     || \
                                        ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE))

#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \
                                              ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \
                                              ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \
                                              ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8)) 

#define IS_TIM_CLOCKFILTER(__ICFILTER__)      ((__ICFILTER__) <= 0xF) 

#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__)   (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \
                                                    ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED))

#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__)   (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \
                                                 ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \
                                                 ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \
                                                 ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8))

#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xF) 

#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \
                                      ((__STATE__) == TIM_OSSR_DISABLE))

#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \
                                      ((__STATE__) == TIM_OSSI_DISABLE))

#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \
                                      ((__LEVEL__) == TIM_LOCKLEVEL_1) || \
                                      ((__LEVEL__) == TIM_LOCKLEVEL_2) || \
                                      ((__LEVEL__) == TIM_LOCKLEVEL_3)) 

#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \
                                       ((__STATE__) == TIM_BREAK_DISABLE))

#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \
                                             ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH))

#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \
                                                  ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE))

#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \
                                        ((__SOURCE__) == TIM_TRGO_ENABLE) || \
                                        ((__SOURCE__) == TIM_TRGO_UPDATE) || \
                                        ((__SOURCE__) == TIM_TRGO_OC1) || \
                                        ((__SOURCE__) == TIM_TRGO_OC1REF) || \
                                        ((__SOURCE__) == TIM_TRGO_OC2REF) || \
                                        ((__SOURCE__) == TIM_TRGO_OC3REF) || \
                                        ((__SOURCE__) == TIM_TRGO_OC4REF))

#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \
                                     ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE))

#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \
                                                 ((__SELECTION__) == TIM_TS_ITR1) || \
                                                 ((__SELECTION__) == TIM_TS_ITR2) || \
                                                 ((__SELECTION__) == TIM_TS_ITR3) || \
                                                 ((__SELECTION__) == TIM_TS_TI1F_ED) || \
                                                 ((__SELECTION__) == TIM_TS_TI1FP1) || \
                                                 ((__SELECTION__) == TIM_TS_TI2FP2) || \
                                                 ((__SELECTION__) == TIM_TS_ETRF))

#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
                                                      ((SELECTION) == TIM_TS_ITR1) || \
                                                      ((SELECTION) == TIM_TS_ITR2) || \
                                                      ((SELECTION) == TIM_TS_ITR3))

#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \
                                                               ((__SELECTION__) == TIM_TS_ITR1) || \
                                                               ((__SELECTION__) == TIM_TS_ITR2) || \
                                                               ((__SELECTION__) == TIM_TS_ITR3) || \
                                                               ((__SELECTION__) == TIM_TS_NONE))

#define IS_TIM_TRIGGERPOLARITY(__POLARITY__)     (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED   ) || \
                                                  ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \
                                                  ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING     ) || \
                                                  ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING    ) || \
                                                  ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE   ))

#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__)  (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \
                                                 ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \
                                                 ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \
                                                 ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8)) 

#define IS_TIM_TRIGGERFILTER(__ICFILTER__)     ((__ICFILTER__) <= 0xF) 

#define IS_TIM_TI1SELECTION(__TI1SELECTION__)   (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \
                                                 ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION))

#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \
                                   ((__BASE__) == TIM_DMABASE_CR2) || \
                                   ((__BASE__) == TIM_DMABASE_SMCR) || \
                                   ((__BASE__) == TIM_DMABASE_DIER) || \
                                   ((__BASE__) == TIM_DMABASE_SR) || \
                                   ((__BASE__) == TIM_DMABASE_EGR) || \
                                   ((__BASE__) == TIM_DMABASE_CCMR1) || \
                                   ((__BASE__) == TIM_DMABASE_CCMR2) || \
                                   ((__BASE__) == TIM_DMABASE_CCER) || \
                                   ((__BASE__) == TIM_DMABASE_CNT) || \
                                   ((__BASE__) == TIM_DMABASE_PSC) || \
                                   ((__BASE__) == TIM_DMABASE_ARR) || \
                                   ((__BASE__) == TIM_DMABASE_RCR) || \
                                   ((__BASE__) == TIM_DMABASE_CCR1) || \
                                   ((__BASE__) == TIM_DMABASE_CCR2) || \
                                   ((__BASE__) == TIM_DMABASE_CCR3) || \
                                   ((__BASE__) == TIM_DMABASE_CCR4) || \
                                   ((__BASE__) == TIM_DMABASE_BDTR) || \
                                   ((__BASE__) == TIM_DMABASE_DCR) || \
                                   ((__BASE__) == TIM_DMABASE_OR))

#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \
                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \
                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \
                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \
                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \
                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \
                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \
                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \
                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \
                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \
                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \
                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \
                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \
                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \
                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \
                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \
                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \
                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS))

#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF) 
/**
  * @}
  */

/** @defgroup TIM_ICPRESCALER TIM Private macros to SET/RESET TIM Input capture value
  * @{
  */
#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
 ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8)) :\
 ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
 ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8)))

#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC) :\
 ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC) :\
 ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC) :\
 ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC))
/**
  * @}
  */

/** @defgroup TIM_CAPTUREPOLARITY TIM Private macros to SET/RESET TIM capture polarity value
  * @{
  */
#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\
 ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4)) :\
 ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8)) :\
 ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12) & TIM_CCER_CC4P)))

#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \
(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\
 ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\
 ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\
 ((__HANDLE__)->Instance->CCER &= (uint16_t)~TIM_CCER_CC4P))
/**
  * @}
  */

/**
  * @}
  */
/* End of private macros -----------------------------------------------------*/

/* Private functions ---------------------------------------------------------*/
/** @defgroup TIM_Private_Functions TIM Private Functions
  * @{
  */
void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure);
void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler, uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter);

void HAL_TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
void HAL_TIM_DMAError(DMA_HandleTypeDef *hdma);
void HAL_TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState);

#if (USE_HAL_TIM_REGISTER_CALLBACKS == 1)
void TIM_ResetCallback(TIM_HandleTypeDef *htim);
#endif /* USE_HAL_TIM_REGISTER_CALLBACKS */

/**
  * @}
  */ 
/* End of private functions --------------------------------------------------*/ 

/**
  * @}
  */ 

/**
  * @}
  */ 
  
#ifdef __cplusplus
}
#endif

#endif /* __STM32F7xx_HAL_TIM_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/