am_hal_sysctrl.h 4.3 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119
  1. //*****************************************************************************
  2. //
  3. //! am_hal_sysctrl.h
  4. //! @file
  5. //!
  6. //! @brief Functions for interfacing with the M4F system control registers
  7. //!
  8. //! @addtogroup sysctrl2 System Control (SYSCTRL)
  9. //! @ingroup apollo2hal
  10. //! @{
  11. //
  12. //*****************************************************************************
  13. //*****************************************************************************
  14. //
  15. // Copyright (c) 2017, Ambiq Micro
  16. // All rights reserved.
  17. //
  18. // Redistribution and use in source and binary forms, with or without
  19. // modification, are permitted provided that the following conditions are met:
  20. //
  21. // 1. Redistributions of source code must retain the above copyright notice,
  22. // this list of conditions and the following disclaimer.
  23. //
  24. // 2. Redistributions in binary form must reproduce the above copyright
  25. // notice, this list of conditions and the following disclaimer in the
  26. // documentation and/or other materials provided with the distribution.
  27. //
  28. // 3. Neither the name of the copyright holder nor the names of its
  29. // contributors may be used to endorse or promote products derived from this
  30. // software without specific prior written permission.
  31. //
  32. // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  33. // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  34. // IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  35. // ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
  36. // LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  37. // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  38. // SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  39. // INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  40. // CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  41. // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  42. // POSSIBILITY OF SUCH DAMAGE.
  43. //
  44. // This is part of revision 1.2.11 of the AmbiqSuite Development Package.
  45. //
  46. //*****************************************************************************
  47. #ifndef AM_HAL_SYSCTRL_H
  48. #define AM_HAL_SYSCTRL_H
  49. //*****************************************************************************
  50. //
  51. // Definitions for sleep mode parameter
  52. //
  53. //*****************************************************************************
  54. #define AM_HAL_SYSCTRL_SLEEP_DEEP true
  55. #define AM_HAL_SYSCTRL_SLEEP_NORMAL false
  56. //*****************************************************************************
  57. //
  58. // Parameters for am_hal_sysctrl_buck_ctimer_isr_init()
  59. //
  60. //*****************************************************************************
  61. //
  62. // Define the maximum valid timer number
  63. //
  64. #define BUCK_TIMER_MAX (AM_HAL_CTIMER_TIMERS_NUM - 1)
  65. //
  66. // Define the valid timer numbers
  67. //
  68. #define AM_HAL_SYSCTRL_BUCK_CTIMER_TIMER0 0
  69. #define AM_HAL_SYSCTRL_BUCK_CTIMER_TIMER1 1
  70. #define AM_HAL_SYSCTRL_BUCK_CTIMER_TIMER2 2
  71. #define AM_HAL_SYSCTRL_BUCK_CTIMER_TIMER3 3
  72. //
  73. // The following is an invalid timer number. If used, it is the caller telling
  74. // the HAL to use the "Hard Option", which applies a constant value to the zero
  75. // cross. The applied value is more noise immune, if less energy efficent.
  76. //
  77. #define AM_HAL_SYSCTRL_BUCK_CTIMER_ZX_CONSTANT 0x01000000 // No timer, apply a constant value
  78. #ifdef __cplusplus
  79. extern "C"
  80. {
  81. #endif
  82. //*****************************************************************************
  83. //
  84. // External function definitions
  85. //
  86. //*****************************************************************************
  87. extern void am_hal_sysctrl_sleep(bool bSleepDeep);
  88. extern void am_hal_sysctrl_fpu_enable(void);
  89. extern void am_hal_sysctrl_fpu_disable(void);
  90. extern void am_hal_sysctrl_fpu_stacking_enable(bool bLazy);
  91. extern void am_hal_sysctrl_fpu_stacking_disable(void);
  92. extern void am_hal_sysctrl_aircr_reset(void);
  93. //
  94. // Apollo2 zero-cross buck/ctimer related functions
  95. //
  96. extern uint32_t am_hal_sysctrl_buck_ctimer_isr_init(uint32_t ui32BuckTimerNumber);
  97. extern bool am_hal_sysctrl_buck_update_complete(void);
  98. #ifdef __cplusplus
  99. }
  100. #endif
  101. #endif // AM_HAL_SYSCTRL_H
  102. //*****************************************************************************
  103. //
  104. // End Doxygen group.
  105. //! @}
  106. //
  107. //*****************************************************************************