rt-thread/bsp/imxrt/libraries/MIMXRT1170/MIMXRT1176/drivers/fsl_usdhc.c

/*
 * Copyright (c) 2016, Freescale Semiconductor, Inc.
 * Copyright 2016-2021 NXP
 * All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#include "fsl_usdhc.h"
#if defined(FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL) && FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL
#include "fsl_cache.h"
#endif /* FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL */
#if defined(FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET) && FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET
#include "fsl_memory.h"
#endif
/*******************************************************************************
 * Definitions
 ******************************************************************************/

/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.usdhc"
#endif

/*! @brief Clock setting */
/* Max SD clock divisor from base clock */
#define USDHC_MAX_DVS          ((USDHC_SYS_CTRL_DVS_MASK >> USDHC_SYS_CTRL_DVS_SHIFT) + 1U)
#define USDHC_MAX_CLKFS        ((USDHC_SYS_CTRL_SDCLKFS_MASK >> USDHC_SYS_CTRL_SDCLKFS_SHIFT) + 1U)
#define USDHC_PREV_DVS(x)      ((x) -= 1U)
#define USDHC_PREV_CLKFS(x, y) ((x) >>= (y))
/*! @brief USDHC ADMA table address align size */
#define USDHC_ADMA_TABLE_ADDRESS_ALIGN (4U)

/* Typedef for interrupt handler. */
typedef void (*usdhc_isr_t)(USDHC_Type *base, usdhc_handle_t *handle);
/*! @brief check flag avalibility */
#define IS_USDHC_FLAG_SET(reg, flag) (((reg) & ((uint32_t)flag)) != 0UL)

/*! @brief usdhc transfer flags */
enum _usdhc_transfer_flags
{
    kUSDHC_CommandOnly        = 1U,  /*!< transfer command only */
    kUSDHC_CommandAndTxData   = 2U,  /*!< transfer command and transmit data */
    kUSDHC_CommandAndRxData   = 4U,  /*!< transfer command and receive data */
    kUSDHC_DataWithAutoCmd12  = 8U,  /*!< transfer data with auto cmd12 enabled */
    kUSDHC_DataWithAutoCmd23  = 16U, /*!< transfer data with auto cmd23 enabled */
    kUSDHC_BootData           = 32U, /*!< transfer boot data */
    kUSDHC_BootDataContinuous = 64U, /*!< transfer boot data continuous */
};

#if defined(FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET) && FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET
#define USDHC_ADDR_CPU_2_DMA(addr) (MEMORY_ConvertMemoryMapAddress((addr), kMEMORY_Local2DMA))
#else
#define USDHC_ADDR_CPU_2_DMA(addr) (addr)
#endif
/*******************************************************************************
 * Prototypes
 ******************************************************************************/
/*!
 * @brief Get the instance.
 *
 * @param base USDHC peripheral base address.
 * @return Instance number.
 */
static uint32_t USDHC_GetInstance(USDHC_Type *base);

/*!
 * @brief Start transfer according to current transfer state
 *
 * @param base USDHC peripheral base address.
 * @param transferFlags transfer flags, @ref _usdhc_transfer_flags.
 * @param blockSize block size.
 * @param blockCount block count.
 */
static status_t USDHC_SetTransferConfig(USDHC_Type *base,
                                        uint32_t transferFlags,
                                        size_t blockSize,
                                        uint32_t blockCount);

/*!
 * @brief Receive command response
 *
 * @param base USDHC peripheral base address.
 * @param command Command to be sent.
 */
static status_t USDHC_ReceiveCommandResponse(USDHC_Type *base, usdhc_command_t *command);

/*!
 * @brief Read DATAPORT when buffer enable bit is set.
 *
 * @param base USDHC peripheral base address.
 * @param data Data to be read.
 * @param transferredWords The number of data words have been transferred last time transaction.
 * @return The number of total data words have been transferred after this time transaction.
 */
static uint32_t USDHC_ReadDataPort(USDHC_Type *base, usdhc_data_t *data, uint32_t transferredWords);

/*!
 * @brief Read data by using DATAPORT polling way.
 *
 * @param base USDHC peripheral base address.
 * @param data Data to be read.
 * @retval kStatus_Fail Read DATAPORT failed.
 * @retval kStatus_Success Operate successfully.
 */
static status_t USDHC_ReadByDataPortBlocking(USDHC_Type *base, usdhc_data_t *data);

/*!
 * @brief Write DATAPORT when buffer enable bit is set.
 *
 * @param base USDHC peripheral base address.
 * @param data Data to be read.
 * @param transferredWords The number of data words have been transferred last time.
 * @return The number of total data words have been transferred after this time transaction.
 */
static uint32_t USDHC_WriteDataPort(USDHC_Type *base, usdhc_data_t *data, uint32_t transferredWords);

/*!
 * @brief Write data by using DATAPORT polling way.
 *
 * @param base USDHC peripheral base address.
 * @param data Data to be transferred.
 * @retval kStatus_Fail Write DATAPORT failed.
 * @retval kStatus_Success Operate successfully.
 */
static status_t USDHC_WriteByDataPortBlocking(USDHC_Type *base, usdhc_data_t *data);

/*!
 * @brief Transfer data by polling way.
 *
 * @param base USDHC peripheral base address.
 * @param data Data to be transferred.
 * @param use DMA flag.
 * @retval kStatus_Fail Transfer data failed.
 * @retval kStatus_InvalidArgument Argument is invalid.
 * @retval kStatus_Success Operate successfully.
 */
static status_t USDHC_TransferDataBlocking(USDHC_Type *base, usdhc_data_t *data, bool enDMA);

/*!
 * @brief wait command done
 *
 * @param base USDHC peripheral base address.
 * @param command configuration
 * @param pollingCmdDone polling command done flag
 */
static status_t USDHC_WaitCommandDone(USDHC_Type *base, usdhc_command_t *command, bool pollingCmdDone);

/*!
 * @brief Handle card detect interrupt.
 *
 * @param base USDHC peripheral base address.
 * @param handle USDHC handle.
 * @param interruptFlags Card detect related interrupt flags.
 */
static void USDHC_TransferHandleCardDetect(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags);

/*!
 * @brief Handle command interrupt.
 *
 * @param base USDHC peripheral base address.
 * @param handle USDHC handle.
 * @param interruptFlags Command related interrupt flags.
 */
static void USDHC_TransferHandleCommand(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags);

/*!
 * @brief Handle data interrupt.
 *
 * @param base USDHC peripheral base address.
 * @param handle USDHC handle.
 * @param interruptFlags Data related interrupt flags.
 */
static void USDHC_TransferHandleData(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags);

/*!
 * @brief Handle SDIO card interrupt signal.
 *
 * @param base USDHC peripheral base address.
 * @param handle USDHC handle.
 */
static void USDHC_TransferHandleSdioInterrupt(USDHC_Type *base, usdhc_handle_t *handle);

/*!
 * @brief Handle SDIO block gap event.
 *
 * @param base USDHC peripheral base address.
 * @param handle USDHC handle.
 */
static void USDHC_TransferHandleBlockGap(USDHC_Type *base, usdhc_handle_t *handle);

#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE)
/*!
 * @brief Handle retuning
 *
 * @param base USDHC peripheral base address.
 * @param handle USDHC handle.
 * @param interrupt flags
 */
static void USDHC_TransferHandleReTuning(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags);
#endif
/*******************************************************************************
 * Variables
 ******************************************************************************/
/*! @brief USDHC base pointer array */
static USDHC_Type *const s_usdhcBase[] = USDHC_BASE_PTRS;

/*! @brief USDHC internal handle pointer array */
static usdhc_handle_t *s_usdhcHandle[ARRAY_SIZE(s_usdhcBase)] = {0};

/*! @brief USDHC IRQ name array */
static const IRQn_Type s_usdhcIRQ[] = USDHC_IRQS;

#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
/*! @brief USDHC clock array name */
static const clock_ip_name_t s_usdhcClock[] = USDHC_CLOCKS;
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */

#if (defined(FSL_FEATURE_USDHC_HAS_RESET) && FSL_FEATURE_USDHC_HAS_RESET)
/*! @brief Pointers to USDHC resets for each instance. */
static const reset_ip_name_t s_usdhcResets[] = USDHC_RSTS;
#endif

/* USDHC ISR for transactional APIs. */
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
static usdhc_isr_t s_usdhcIsr = (usdhc_isr_t)DefaultISR;
#else
static usdhc_isr_t s_usdhcIsr;
#endif
/*! @brief Dummy data buffer for mmc boot mode  */
AT_NONCACHEABLE_SECTION_ALIGN(static uint32_t s_usdhcBootDummy, USDHC_ADMA2_ADDRESS_ALIGN);

/*******************************************************************************
 * Code
 ******************************************************************************/
static uint32_t USDHC_GetInstance(USDHC_Type *base)
{
    uint8_t instance = 0;

    while ((instance < ARRAY_SIZE(s_usdhcBase)) && (s_usdhcBase[instance] != base))
    {
        instance++;
    }

    assert(instance < ARRAY_SIZE(s_usdhcBase));

    return instance;
}

static status_t USDHC_SetTransferConfig(USDHC_Type *base, uint32_t transferFlags, size_t blockSize, uint32_t blockCount)
{
    uint32_t mixCtrl = base->MIX_CTRL;

    if (((uint32_t)kUSDHC_CommandOnly & transferFlags) != 0U)
    {
        /* clear data flags */
        mixCtrl &= ~(USDHC_MIX_CTRL_MSBSEL_MASK | USDHC_MIX_CTRL_BCEN_MASK | USDHC_MIX_CTRL_DTDSEL_MASK |
                     USDHC_MIX_CTRL_AC12EN_MASK | USDHC_MIX_CTRL_AC23EN_MASK);

        if (IS_USDHC_FLAG_SET(base->PRES_STATE, kUSDHC_CommandInhibitFlag))
        {
            return kStatus_USDHC_BusyTransferring;
        }
    }
    else
    {
        /* if transfer boot continous, only need set the CREQ bit, leave others as it is */
        if ((transferFlags & (uint32_t)kUSDHC_BootDataContinuous) != 0U)
        {
            /* clear stop at block gap request */
            base->PROT_CTRL &= ~USDHC_PROT_CTRL_SABGREQ_MASK;
            /* continous transfer data */
            base->PROT_CTRL |= USDHC_PROT_CTRL_CREQ_MASK;
            return kStatus_Success;
        }

        /* check data inhibit flag */
        if (IS_USDHC_FLAG_SET(base->PRES_STATE, kUSDHC_DataInhibitFlag))
        {
            return kStatus_USDHC_BusyTransferring;
        }
        /* check transfer block count */
        if ((blockCount > USDHC_MAX_BLOCK_COUNT))
        {
            return kStatus_InvalidArgument;
        }

        /* config mix parameter */
        mixCtrl &= ~(USDHC_MIX_CTRL_MSBSEL_MASK | USDHC_MIX_CTRL_BCEN_MASK | USDHC_MIX_CTRL_DTDSEL_MASK |
                     USDHC_MIX_CTRL_AC12EN_MASK);

        if ((transferFlags & (uint32_t)kUSDHC_CommandAndRxData) != 0U)
        {
            mixCtrl |= USDHC_MIX_CTRL_DTDSEL_MASK;
        }

        if (blockCount > 1U)
        {
            mixCtrl |= USDHC_MIX_CTRL_MSBSEL_MASK | USDHC_MIX_CTRL_BCEN_MASK;
            /* auto command 12 */
            if ((transferFlags & (uint32_t)kUSDHC_DataWithAutoCmd12) != 0U)
            {
                mixCtrl |= USDHC_MIX_CTRL_AC12EN_MASK;
            }
        }

        /* auto command 23, auto send set block count cmd before multiple read/write */
        if ((transferFlags & (uint32_t)kUSDHC_DataWithAutoCmd23) != 0U)
        {
            mixCtrl |= USDHC_MIX_CTRL_AC23EN_MASK;
            base->VEND_SPEC2 |= USDHC_VEND_SPEC2_ACMD23_ARGU2_EN_MASK;
            /* config the block count to DS_ADDR */
            base->DS_ADDR = blockCount;
        }
        else
        {
            mixCtrl &= ~USDHC_MIX_CTRL_AC23EN_MASK;
            base->VEND_SPEC2 &= ~USDHC_VEND_SPEC2_ACMD23_ARGU2_EN_MASK;
        }

        /* if transfer boot data, leave the block count to USDHC_SetMmcBootConfig function */
        if ((transferFlags & (uint32_t)kUSDHC_BootData) == 0U)
        {
            /* config data block size/block count */
            base->BLK_ATT = ((base->BLK_ATT & ~(USDHC_BLK_ATT_BLKSIZE_MASK | USDHC_BLK_ATT_BLKCNT_MASK)) |
                             (USDHC_BLK_ATT_BLKSIZE(blockSize) | USDHC_BLK_ATT_BLKCNT(blockCount)));
        }
        else
        {
            mixCtrl |= USDHC_MIX_CTRL_MSBSEL_MASK | USDHC_MIX_CTRL_BCEN_MASK;
            base->PROT_CTRL |= USDHC_PROT_CTRL_RD_DONE_NO_8CLK_MASK;
        }
    }
    /* config the mix parameter */
    base->MIX_CTRL = mixCtrl;

    return kStatus_Success;
}

void USDHC_SetDataConfig(USDHC_Type *base,
                         usdhc_transfer_direction_t dataDirection,
                         uint32_t blockCount,
                         uint32_t blockSize)
{
    assert(blockCount <= USDHC_MAX_BLOCK_COUNT);

    uint32_t mixCtrl = base->MIX_CTRL;

    /* block attribute configuration */
    base->BLK_ATT = ((base->BLK_ATT & ~(USDHC_BLK_ATT_BLKSIZE_MASK | USDHC_BLK_ATT_BLKCNT_MASK)) |
                     (USDHC_BLK_ATT_BLKSIZE(blockSize) | USDHC_BLK_ATT_BLKCNT(blockCount)));

    /* config mix parameter */
    mixCtrl &= ~(USDHC_MIX_CTRL_MSBSEL_MASK | USDHC_MIX_CTRL_BCEN_MASK | USDHC_MIX_CTRL_DTDSEL_MASK);

    mixCtrl |= USDHC_MIX_CTRL_DTDSEL(dataDirection) | (blockCount > 1U ? USDHC_MIX_CTRL_MSBSEL_MASK : 0U);

    base->MIX_CTRL = mixCtrl;
}

static status_t USDHC_ReceiveCommandResponse(USDHC_Type *base, usdhc_command_t *command)
{
    assert(command != NULL);

    uint32_t response0 = base->CMD_RSP0;
    uint32_t response1 = base->CMD_RSP1;
    uint32_t response2 = base->CMD_RSP2;

    if (command->responseType != kCARD_ResponseTypeNone)
    {
        command->response[0U] = response0;
        if (command->responseType == kCARD_ResponseTypeR2)
        {
            /* R3-R2-R1-R0(lowest 8 bit is invalid bit) has the same format as R2 format in SD specification document
            after removed internal CRC7 and end bit. */
            command->response[0U] <<= 8U;
            command->response[1U] = (response1 << 8U) | ((response0 & 0xFF000000U) >> 24U);
            command->response[2U] = (response2 << 8U) | ((response1 & 0xFF000000U) >> 24U);
            command->response[3U] = (base->CMD_RSP3 << 8U) | ((response2 & 0xFF000000U) >> 24U);
        }
    }

    /* check response error flag */
    if ((command->responseErrorFlags != 0U) &&
        ((command->responseType == kCARD_ResponseTypeR1) || (command->responseType == kCARD_ResponseTypeR1b) ||
         (command->responseType == kCARD_ResponseTypeR6) || (command->responseType == kCARD_ResponseTypeR5)))
    {
        if (((command->responseErrorFlags) & (command->response[0U])) != 0U)
        {
            return kStatus_USDHC_SendCommandFailed;
        }
    }

    return kStatus_Success;
}

static uint32_t USDHC_ReadDataPort(USDHC_Type *base, usdhc_data_t *data, uint32_t transferredWords)
{
    uint32_t i;
    uint32_t totalWords;
    uint32_t wordsCanBeRead; /* The words can be read at this time. */
    uint32_t readWatermark = ((base->WTMK_LVL & USDHC_WTMK_LVL_RD_WML_MASK) >> USDHC_WTMK_LVL_RD_WML_SHIFT);

    /* If DMA is enable, do not need to polling data port */
    if ((base->MIX_CTRL & USDHC_MIX_CTRL_DMAEN_MASK) == 0U)
    {
        /*
         * Add non aligned access support ,user need make sure your buffer size is big
         * enough to hold the data,in other words,user need make sure the buffer size
         * is 4 byte aligned
         */
        if (data->blockSize % sizeof(uint32_t) != 0U)
        {
            data->blockSize +=
                sizeof(uint32_t) - (data->blockSize % sizeof(uint32_t)); /* make the block size as word-aligned */
        }

        totalWords = ((data->blockCount * data->blockSize) / sizeof(uint32_t));

        /* If watermark level is equal or bigger than totalWords, transfers totalWords data. */
        if (readWatermark >= totalWords)
        {
            wordsCanBeRead = totalWords;
        }
        /* If watermark level is less than totalWords and left words to be sent is equal or bigger than readWatermark,
        transfers watermark level words. */
        else if ((readWatermark < totalWords) && ((totalWords - transferredWords) >= readWatermark))
        {
            wordsCanBeRead = readWatermark;
        }
        /* If watermark level is less than totalWords and left words to be sent is less than readWatermark, transfers
        left
        words. */
        else
        {
            wordsCanBeRead = (totalWords - transferredWords);
        }

        i = 0U;
        while (i < wordsCanBeRead)
        {
            data->rxData[transferredWords++] = USDHC_ReadData(base);
            i++;
        }
    }

    return transferredWords;
}

static status_t USDHC_ReadByDataPortBlocking(USDHC_Type *base, usdhc_data_t *data)
{
    uint32_t totalWords;
    uint32_t transferredWords = 0U, interruptStatus = 0U;
    status_t error = kStatus_Success;

    /*
     * Add non aligned access support ,user need make sure your buffer size is big
     * enough to hold the data,in other words,user need make sure the buffer size
     * is 4 byte aligned
     */
    if (data->blockSize % sizeof(uint32_t) != 0U)
    {
        data->blockSize +=
            sizeof(uint32_t) - (data->blockSize % sizeof(uint32_t)); /* make the block size as word-aligned */
    }

    totalWords = ((data->blockCount * data->blockSize) / sizeof(uint32_t));

    while ((error == kStatus_Success) && (transferredWords < totalWords))
    {
        while (
            !(IS_USDHC_FLAG_SET(interruptStatus, ((uint32_t)kUSDHC_BufferReadReadyFlag |
                                                  (uint32_t)kUSDHC_DataErrorFlag | (uint32_t)kUSDHC_TuningErrorFlag))))
        {
            interruptStatus = USDHC_GetInterruptStatusFlags(base);
        }

        /* during std tuning process, software do not need to read data, but wait BRR is enough */
        if ((data->dataType == (uint32_t)kUSDHC_TransferDataTuning) &&
            (IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_BufferReadReadyFlag)))
        {
            USDHC_ClearInterruptStatusFlags(base, kUSDHC_BufferReadReadyFlag);

            return kStatus_Success;
        }
#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE)
        else if (IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_TuningErrorFlag))
        {
            USDHC_ClearInterruptStatusFlags(base, kUSDHC_TuningErrorFlag);
            /* if tuning error occur ,return directly */
            error = kStatus_USDHC_TuningError;
        }
#endif
        else if (IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_DataErrorFlag))
        {
            if (!(data->enableIgnoreError))
            {
                error = kStatus_Fail;
            }
            /* clear data error flag */
            USDHC_ClearInterruptStatusFlags(base, kUSDHC_DataErrorFlag);
        }
        else
        {
            /* Intentional empty */
        }

        if (error == kStatus_Success)
        {
            transferredWords = USDHC_ReadDataPort(base, data, transferredWords);
            /* clear buffer read ready */
            USDHC_ClearInterruptStatusFlags(base, kUSDHC_BufferReadReadyFlag);
            interruptStatus = 0U;
        }
    }

    /* Clear data complete flag after the last read operation. */
    USDHC_ClearInterruptStatusFlags(base, kUSDHC_DataCompleteFlag);

    return error;
}

static uint32_t USDHC_WriteDataPort(USDHC_Type *base, usdhc_data_t *data, uint32_t transferredWords)
{
    uint32_t i;
    uint32_t totalWords;
    uint32_t wordsCanBeWrote; /* Words can be wrote at this time. */
    uint32_t writeWatermark = ((base->WTMK_LVL & USDHC_WTMK_LVL_WR_WML_MASK) >> USDHC_WTMK_LVL_WR_WML_SHIFT);

    /* If DMA is enable, do not need to polling data port */
    if ((base->MIX_CTRL & USDHC_MIX_CTRL_DMAEN_MASK) == 0U)
    {
        /*
         * Add non aligned access support ,user need make sure your buffer size is big
         * enough to hold the data,in other words,user need make sure the buffer size
         * is 4 byte aligned
         */
        if (data->blockSize % sizeof(uint32_t) != 0U)
        {
            data->blockSize +=
                sizeof(uint32_t) - (data->blockSize % sizeof(uint32_t)); /* make the block size as word-aligned */
        }

        totalWords = ((data->blockCount * data->blockSize) / sizeof(uint32_t));

        /* If watermark level is equal or bigger than totalWords, transfers totalWords data.*/
        if (writeWatermark >= totalWords)
        {
            wordsCanBeWrote = totalWords;
        }
        /* If watermark level is less than totalWords and left words to be sent is equal or bigger than watermark,
        transfers watermark level words. */
        else if ((writeWatermark < totalWords) && ((totalWords - transferredWords) >= writeWatermark))
        {
            wordsCanBeWrote = writeWatermark;
        }
        /* If watermark level is less than totalWords and left words to be sent is less than watermark, transfers left
        words. */
        else
        {
            wordsCanBeWrote = (totalWords - transferredWords);
        }

        i = 0U;
        while (i < wordsCanBeWrote)
        {
            USDHC_WriteData(base, data->txData[transferredWords++]);
            i++;
        }
    }

    return transferredWords;
}

static status_t USDHC_WriteByDataPortBlocking(USDHC_Type *base, usdhc_data_t *data)
{
    uint32_t totalWords;

    uint32_t transferredWords = 0U, interruptStatus = 0U;
    status_t error = kStatus_Success;

    /*
     * Add non aligned access support ,user need make sure your buffer size is big
     * enough to hold the data,in other words,user need make sure the buffer size
     * is 4 byte aligned
     */
    if (data->blockSize % sizeof(uint32_t) != 0U)
    {
        data->blockSize +=
            sizeof(uint32_t) - (data->blockSize % sizeof(uint32_t)); /* make the block size as word-aligned */
    }

    totalWords = (data->blockCount * data->blockSize) / sizeof(uint32_t);

    while ((error == kStatus_Success) && (transferredWords < totalWords))
    {
        while (!(IS_USDHC_FLAG_SET(interruptStatus, (uint32_t)kUSDHC_BufferWriteReadyFlag |
                                                        (uint32_t)kUSDHC_DataErrorFlag |
                                                        (uint32_t)kUSDHC_TuningErrorFlag)))
        {
            interruptStatus = USDHC_GetInterruptStatusFlags(base);
        }
#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE)
        if (IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_TuningErrorFlag))
        {
            USDHC_ClearInterruptStatusFlags(base, kUSDHC_TuningErrorFlag);
            /* if tuning error occur ,return directly */
            return kStatus_USDHC_TuningError;
        }
        else
#endif
            if (IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_DataErrorFlag))
        {
            if (!(data->enableIgnoreError))
            {
                error = kStatus_Fail;
            }
            /* clear data error flag */
            USDHC_ClearInterruptStatusFlags(base, kUSDHC_DataErrorFlag);
        }
        else
        {
            /* Intentional empty */
        }

        if (error == kStatus_Success)
        {
            transferredWords = USDHC_WriteDataPort(base, data, transferredWords);
            /* clear buffer write ready */
            USDHC_ClearInterruptStatusFlags(base, kUSDHC_BufferWriteReadyFlag);
            interruptStatus = 0U;
        }
    }

    /* Wait write data complete or data transfer error after the last writing operation. */
    while (!(IS_USDHC_FLAG_SET(interruptStatus, (uint32_t)kUSDHC_DataCompleteFlag | (uint32_t)kUSDHC_DataErrorFlag)))
    {
        interruptStatus = USDHC_GetInterruptStatusFlags(base);
    }

    if ((interruptStatus & (uint32_t)kUSDHC_DataErrorFlag) != 0UL)
    {
        if (!(data->enableIgnoreError))
        {
            error = kStatus_Fail;
        }
    }
    USDHC_ClearInterruptStatusFlags(base, ((uint32_t)kUSDHC_DataCompleteFlag | (uint32_t)kUSDHC_DataErrorFlag));

    return error;
}

/*!
 * brief send command function
 *
 * param base USDHC peripheral base address.
 * param command configuration
 */
void USDHC_SendCommand(USDHC_Type *base, usdhc_command_t *command)
{
    assert(NULL != command);

    uint32_t xferType = base->CMD_XFR_TYP, flags = command->flags;

    if (((base->PRES_STATE & (uint32_t)kUSDHC_CommandInhibitFlag) == 0U) && (command->type != kCARD_CommandTypeEmpty))
    {
        if ((command->responseType == kCARD_ResponseTypeR1) || (command->responseType == kCARD_ResponseTypeR5) ||
            (command->responseType == kCARD_ResponseTypeR6) || (command->responseType == kCARD_ResponseTypeR7))
        {
            flags |= ((uint32_t)kUSDHC_ResponseLength48Flag | (uint32_t)kUSDHC_EnableCrcCheckFlag |
                      (uint32_t)kUSDHC_EnableIndexCheckFlag);
        }
        else if ((command->responseType == kCARD_ResponseTypeR1b) || (command->responseType == kCARD_ResponseTypeR5b))
        {
            flags |= ((uint32_t)kUSDHC_ResponseLength48BusyFlag | (uint32_t)kUSDHC_EnableCrcCheckFlag |
                      (uint32_t)kUSDHC_EnableIndexCheckFlag);
        }
        else if (command->responseType == kCARD_ResponseTypeR2)
        {
            flags |= ((uint32_t)kUSDHC_ResponseLength136Flag | (uint32_t)kUSDHC_EnableCrcCheckFlag);
        }
        else if ((command->responseType == kCARD_ResponseTypeR3) || (command->responseType == kCARD_ResponseTypeR4))
        {
            flags |= ((uint32_t)kUSDHC_ResponseLength48Flag);
        }
        else
        {
            /* Intentional empty */
        }

        if (command->type == kCARD_CommandTypeAbort)
        {
            flags |= (uint32_t)kUSDHC_CommandTypeAbortFlag;
        }

        /* config cmd index */
        xferType &= ~(USDHC_CMD_XFR_TYP_CMDINX_MASK | USDHC_CMD_XFR_TYP_CMDTYP_MASK | USDHC_CMD_XFR_TYP_CICEN_MASK |
                      USDHC_CMD_XFR_TYP_CCCEN_MASK | USDHC_CMD_XFR_TYP_RSPTYP_MASK | USDHC_CMD_XFR_TYP_DPSEL_MASK);

        xferType |=
            (((command->index << USDHC_CMD_XFR_TYP_CMDINX_SHIFT) & USDHC_CMD_XFR_TYP_CMDINX_MASK) |
             ((flags) & (USDHC_CMD_XFR_TYP_CMDTYP_MASK | USDHC_CMD_XFR_TYP_CICEN_MASK | USDHC_CMD_XFR_TYP_CCCEN_MASK |
                         USDHC_CMD_XFR_TYP_RSPTYP_MASK | USDHC_CMD_XFR_TYP_DPSEL_MASK)));

        /* config the command xfertype and argument */
        base->CMD_ARG     = command->argument;
        base->CMD_XFR_TYP = xferType;
    }

    if (command->type == kCARD_CommandTypeEmpty)
    {
        /* disable CMD done interrupt for empty command */
        base->INT_SIGNAL_EN &= ~USDHC_INT_SIGNAL_EN_CCIEN_MASK;
    }
}

static status_t USDHC_WaitCommandDone(USDHC_Type *base, usdhc_command_t *command, bool pollingCmdDone)
{
    assert(NULL != command);

    status_t error           = kStatus_Success;
    uint32_t interruptStatus = 0U;
    /* check if need polling command done or not */
    if (pollingCmdDone)
    {
        /* Wait command complete or USDHC encounters error. */
        while (!(IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_CommandFlag)))
        {
            interruptStatus = USDHC_GetInterruptStatusFlags(base);
        }

        if ((interruptStatus & (uint32_t)kUSDHC_CommandErrorFlag) != 0UL)
        {
            error = kStatus_Fail;
        }

        /* Receive response when command completes successfully. */
        if (error == kStatus_Success)
        {
            error = USDHC_ReceiveCommandResponse(base, command);
        }

        USDHC_ClearInterruptStatusFlags(base, kUSDHC_CommandFlag);
    }

    return error;
}

static status_t USDHC_TransferDataBlocking(USDHC_Type *base, usdhc_data_t *data, bool enDMA)
{
    status_t error           = kStatus_Success;
    uint32_t interruptStatus = 0U;

    if (enDMA)
    {
        /* Wait data complete or USDHC encounters error. */
        while (!(IS_USDHC_FLAG_SET(interruptStatus, ((uint32_t)kUSDHC_DataDMAFlag | (uint32_t)kUSDHC_TuningErrorFlag))))
        {
            interruptStatus = USDHC_GetInterruptStatusFlags(base);
        }

#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE)
        if (IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_TuningErrorFlag))
        {
            error = kStatus_USDHC_TuningError;
        }
        else
#endif
            if (IS_USDHC_FLAG_SET(interruptStatus, ((uint32_t)kUSDHC_DataErrorFlag | (uint32_t)kUSDHC_DmaErrorFlag)))
        {
            if ((!(data->enableIgnoreError)) || (IS_USDHC_FLAG_SET(interruptStatus, kUSDHC_DataTimeoutFlag)))
            {
                error = kStatus_USDHC_TransferDataFailed;
            }
        }
        else
        {
            /* Intentional empty */
        }
        /* load dummy data */
        if ((data->dataType == (uint32_t)kUSDHC_TransferDataBootcontinous) && (error == kStatus_Success))
        {
            *(data->rxData) = s_usdhcBootDummy;
        }

        USDHC_ClearInterruptStatusFlags(base, ((uint32_t)kUSDHC_DataDMAFlag | (uint32_t)kUSDHC_TuningErrorFlag));
    }
    else
    {
        if (data->rxData != NULL)
        {
            error = USDHC_ReadByDataPortBlocking(base, data);
            if (error != kStatus_Success)
            {
                return error;
            }
        }
        else
        {
            error = USDHC_WriteByDataPortBlocking(base, data);
            if (error != kStatus_Success)
            {
                return error;
            }
        }
    }

    return error;
}

/*!
 * brief USDHC module initialization function.
 *
 * Configures the USDHC according to the user configuration.
 *
 * Example:
   code
   usdhc_config_t config;
   config.cardDetectDat3 = false;
   config.endianMode = kUSDHC_EndianModeLittle;
   config.dmaMode = kUSDHC_DmaModeAdma2;
   config.readWatermarkLevel = 128U;
   config.writeWatermarkLevel = 128U;
   USDHC_Init(USDHC, &config);
   endcode
 *
 * param base USDHC peripheral base address.
 * param config USDHC configuration information.
 * retval kStatus_Success Operate successfully.
 */
void USDHC_Init(USDHC_Type *base, const usdhc_config_t *config)
{
    assert(config != NULL);
    assert((config->writeWatermarkLevel >= 1U) && (config->writeWatermarkLevel <= 128U));
    assert((config->readWatermarkLevel >= 1U) && (config->readWatermarkLevel <= 128U));
#if !(defined(FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) && FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN)
    assert(config->writeBurstLen <= 16U);
#endif
    uint32_t proctl, sysctl, wml;

#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
    /* Enable USDHC clock. */
    CLOCK_EnableClock(s_usdhcClock[USDHC_GetInstance(base)]);
#endif

#if (defined(FSL_FEATURE_USDHC_HAS_RESET) && FSL_FEATURE_USDHC_HAS_RESET)
    /* Reset the USDHC module */
    RESET_PeripheralReset(s_usdhcResets[USDHC_GetInstance(base)]);
#endif

    /* Reset ALL USDHC. */
    base->SYS_CTRL |= USDHC_SYS_CTRL_RSTA_MASK | USDHC_SYS_CTRL_RSTC_MASK | USDHC_SYS_CTRL_RSTD_MASK;

    proctl = base->PROT_CTRL;
    wml    = base->WTMK_LVL;
    sysctl = base->SYS_CTRL;

    proctl &= ~(USDHC_PROT_CTRL_EMODE_MASK | USDHC_PROT_CTRL_DMASEL_MASK);
    /* Endian mode*/
    proctl |= USDHC_PROT_CTRL_EMODE(config->endianMode);

#if (defined(FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) && FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN)
    /* Watermark level */
    wml &= ~(USDHC_WTMK_LVL_RD_WML_MASK | USDHC_WTMK_LVL_WR_WML_MASK);
    wml |= (USDHC_WTMK_LVL_RD_WML(config->readWatermarkLevel) | USDHC_WTMK_LVL_WR_WML(config->writeWatermarkLevel));
#else
    /* Watermark level */
    wml &= ~(USDHC_WTMK_LVL_RD_WML_MASK | USDHC_WTMK_LVL_WR_WML_MASK | USDHC_WTMK_LVL_RD_BRST_LEN_MASK |
             USDHC_WTMK_LVL_WR_BRST_LEN_MASK);
    wml |= (USDHC_WTMK_LVL_RD_WML(config->readWatermarkLevel) | USDHC_WTMK_LVL_WR_WML(config->writeWatermarkLevel) |
            USDHC_WTMK_LVL_RD_BRST_LEN(config->readBurstLen) | USDHC_WTMK_LVL_WR_BRST_LEN(config->writeBurstLen));
#endif

    /* config the data timeout value */
    sysctl &= ~USDHC_SYS_CTRL_DTOCV_MASK;
    sysctl |= USDHC_SYS_CTRL_DTOCV(config->dataTimeout);

    base->SYS_CTRL  = sysctl;
    base->WTMK_LVL  = wml;
    base->PROT_CTRL = proctl;

#if FSL_FEATURE_USDHC_HAS_EXT_DMA
    /* disable external DMA */
    base->VEND_SPEC &= ~USDHC_VEND_SPEC_EXT_DMA_EN_MASK;
#endif
    /* disable internal DMA and DDR mode */
    base->MIX_CTRL &= ~(USDHC_MIX_CTRL_DMAEN_MASK | USDHC_MIX_CTRL_DDR_EN_MASK);
    /* disable interrupt, enable all the interrupt status, clear status. */
    base->INT_STATUS_EN = kUSDHC_AllInterruptFlags;
    base->INT_SIGNAL_EN = 0UL;
    base->INT_STATUS    = kUSDHC_AllInterruptFlags;
}

/*!
 * brief Deinitializes the USDHC.
 *
 * param base USDHC peripheral base address.
 */
void USDHC_Deinit(USDHC_Type *base)
{
#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
    /* Disable clock. */
    CLOCK_DisableClock(s_usdhcClock[USDHC_GetInstance(base)]);
#endif
}

/*!
 * brief Resets the USDHC.
 *
 * param base USDHC peripheral base address.
 * param mask The reset type mask(_usdhc_reset).
 * param timeout Timeout for reset.
 * retval true Reset successfully.
 * retval false Reset failed.
 */
bool USDHC_Reset(USDHC_Type *base, uint32_t mask, uint32_t timeout)
{
    base->SYS_CTRL |= (mask & (USDHC_SYS_CTRL_RSTA_MASK | USDHC_SYS_CTRL_RSTC_MASK | USDHC_SYS_CTRL_RSTD_MASK
#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE)
                               | USDHC_SYS_CTRL_RSTT_MASK
#endif
                               ));
    /* Delay some time to wait reset success. */
    while (IS_USDHC_FLAG_SET(base->SYS_CTRL, mask))
    {
        if (timeout == 0UL)
        {
            break;
        }
        timeout--;
    }

    return ((0UL == timeout) ? false : true);
}

/*!
 * brief Gets the capability information.
 *
 * param base USDHC peripheral base address.
 * param capability Structure to save capability information.
 */
void USDHC_GetCapability(USDHC_Type *base, usdhc_capability_t *capability)
{
    assert(capability != NULL);

    uint32_t htCapability;
    uint32_t maxBlockLength;

    htCapability = base->HOST_CTRL_CAP;

    /* Get the capability of USDHC. */
    maxBlockLength             = ((htCapability & USDHC_HOST_CTRL_CAP_MBL_MASK) >> USDHC_HOST_CTRL_CAP_MBL_SHIFT);
    capability->maxBlockLength = (512UL << maxBlockLength);
    /* Other attributes not in HTCAPBLT register. */
    capability->maxBlockCount = USDHC_MAX_BLOCK_COUNT;
    capability->flags =
        (htCapability & (USDHC_HOST_CTRL_CAP_ADMAS_MASK | USDHC_HOST_CTRL_CAP_HSS_MASK | USDHC_HOST_CTRL_CAP_DMAS_MASK |
                         USDHC_HOST_CTRL_CAP_SRS_MASK | USDHC_HOST_CTRL_CAP_VS33_MASK));
    capability->flags |= htCapability & USDHC_HOST_CTRL_CAP_VS30_MASK;
    capability->flags |= htCapability & USDHC_HOST_CTRL_CAP_VS18_MASK;
    capability->flags |= htCapability & USDHC_HOST_CTRL_CAP_DDR50_SUPPORT_MASK;
#if defined(FSL_FEATURE_USDHC_HAS_SDR104_MODE) && FSL_FEATURE_USDHC_HAS_SDR104_MODE
    capability->flags |= USDHC_HOST_CTRL_CAP_SDR104_SUPPORT_MASK;
#endif

#if defined(FSL_FEATURE_USDHC_HAS_SDR104_MODE) && FSL_FEATURE_USDHC_HAS_SDR50_MODE
    capability->flags |= USDHC_HOST_CTRL_CAP_SDR50_SUPPORT_MASK;
#endif
    /* USDHC support 4/8 bit data bus width. */
    capability->flags |= (USDHC_HOST_CTRL_CAP_MBL_SHIFT << 0UL) | (USDHC_HOST_CTRL_CAP_MBL_SHIFT << 1UL);
}

/*!
 * brief Sets the SD bus clock frequency.
 *
 * param base USDHC peripheral base address.
 * param srcClock_Hz USDHC source clock frequency united in Hz.
 * param busClock_Hz SD bus clock frequency united in Hz.
 *
 * return The nearest frequency of busClock_Hz configured to SD bus.
 */
uint32_t USDHC_SetSdClock(USDHC_Type *base, uint32_t srcClock_Hz, uint32_t busClock_Hz)
{
    assert(srcClock_Hz != 0U);
    assert(busClock_Hz != 0U);

    uint32_t totalDiv         = 0UL;
    uint32_t divisor          = 0UL;
    uint32_t prescaler        = 0UL;
    uint32_t sysctl           = 0UL;
    uint32_t nearestFrequency = 0UL;

    if (busClock_Hz > srcClock_Hz)
    {
        busClock_Hz = srcClock_Hz;
    }

    totalDiv = srcClock_Hz / busClock_Hz;

    /* calucate total divisor first */
    if (totalDiv > (USDHC_MAX_CLKFS * USDHC_MAX_DVS))
    {
        return 0UL;
    }

    if (totalDiv != 0UL)
    {
        /* calucate the divisor (srcClock_Hz / divisor) <= busClock_Hz */
        if ((srcClock_Hz / totalDiv) > busClock_Hz)
        {
            totalDiv++;
        }

        /* divide the total divisor to div and prescaler */
        if (totalDiv > USDHC_MAX_DVS)
        {
            prescaler = totalDiv / USDHC_MAX_DVS;
            /* prescaler must be a value which equal 2^n and smaller than SDHC_MAX_CLKFS */
            while (((USDHC_MAX_CLKFS % prescaler) != 0UL) || (prescaler == 1UL))
            {
                prescaler++;
            }
            /* calucate the divisor */
            divisor = totalDiv / prescaler;
            /* fine tuning the divisor until divisor * prescaler >= totalDiv */
            while ((divisor * prescaler) < totalDiv)
            {
                divisor++;
                if (divisor > USDHC_MAX_DVS)
                {
                    prescaler <<= 1UL;
                    if (prescaler > USDHC_MAX_CLKFS)
                    {
                        return 0UL;
                    }
                    divisor = totalDiv / prescaler;
                }
            }
        }
        else
        {
            /* in this situation , divsior and SDCLKFS can generate same clock
            use SDCLKFS*/
            if (((totalDiv % 2UL) != 0UL) && (totalDiv != 1UL))
            {
                divisor   = totalDiv;
                prescaler = 1UL;
            }
            else
            {
                divisor   = 1UL;
                prescaler = totalDiv;
            }
        }
        nearestFrequency = srcClock_Hz / (divisor == 0UL ? 1UL : divisor) / prescaler;
    }
    /* in this condition , srcClock_Hz = busClock_Hz, */
    else
    {
        /* in DDR mode , set SDCLKFS to 0, divisor = 0, actually the
        totoal divider = 2U */
        divisor          = 0UL;
        prescaler        = 0UL;
        nearestFrequency = srcClock_Hz;
    }

    /* calucate the value write to register */
    if (divisor != 0UL)
    {
        USDHC_PREV_DVS(divisor);
    }
    /* calucate the value write to register */
    if (prescaler != 0UL)
    {
        USDHC_PREV_CLKFS(prescaler, 1UL);
    }

    /* Set the SD clock frequency divisor, SD clock frequency select, data timeout counter value. */
    sysctl = base->SYS_CTRL;
    sysctl &= ~(USDHC_SYS_CTRL_DVS_MASK | USDHC_SYS_CTRL_SDCLKFS_MASK);
    sysctl |= (USDHC_SYS_CTRL_DVS(divisor) | USDHC_SYS_CTRL_SDCLKFS(prescaler));
    base->SYS_CTRL = sysctl;

    /* Wait until the SD clock is stable. */
    while (!IS_USDHC_FLAG_SET(base->PRES_STATE, USDHC_PRES_STATE_SDSTB_MASK))
    {
    }

    return nearestFrequency;
}

/*!
 * brief Sends 80 clocks to the card to set it to the active state.
 *
 * This function must be called each time the card is inserted to ensure that the card can receive the command
 * correctly.
 *
 * param base USDHC peripheral base address.
 * param timeout Timeout to initialize card.
 * retval true Set card active successfully.
 * retval false Set card active failed.
 */
bool USDHC_SetCardActive(USDHC_Type *base, uint32_t timeout)
{
    base->SYS_CTRL |= USDHC_SYS_CTRL_INITA_MASK;
    /* Delay some time to wait card become active state. */
    while (IS_USDHC_FLAG_SET(base->SYS_CTRL, USDHC_SYS_CTRL_INITA_MASK))
    {
        if (0UL == timeout)
        {
            break;
        }
        timeout--;
    }

    return ((0UL == timeout) ? false : true);
}

/*!
 * brief the enable/disable DDR mode
 *
 * param base USDHC peripheral base address.
 * param enable/disable flag
 * param nibble position
 */
void USDHC_EnableDDRMode(USDHC_Type *base, bool enable, uint32_t nibblePos)
{
    uint32_t prescaler = (base->SYS_CTRL & USDHC_SYS_CTRL_SDCLKFS_MASK) >> USDHC_SYS_CTRL_SDCLKFS_SHIFT;

    if (enable)
    {
        base->MIX_CTRL &= ~USDHC_MIX_CTRL_NIBBLE_POS_MASK;
        base->MIX_CTRL |= (USDHC_MIX_CTRL_DDR_EN_MASK | USDHC_MIX_CTRL_NIBBLE_POS(nibblePos));
        prescaler >>= 1UL;
    }
    else
    {
        base->MIX_CTRL &= ~USDHC_MIX_CTRL_DDR_EN_MASK;

        if (prescaler == 0UL)
        {
            prescaler += 1UL;
        }
        else
        {
            prescaler <<= 1UL;
        }
    }

    base->SYS_CTRL = (base->SYS_CTRL & (~USDHC_SYS_CTRL_SDCLKFS_MASK)) | USDHC_SYS_CTRL_SDCLKFS(prescaler);
}

/*!
 * brief Configures the MMC boot feature.
 *
 * Example:
   code
   usdhc_boot_config_t config;
   config.ackTimeoutCount = 4;
   config.bootMode = kUSDHC_BootModeNormal;
   config.blockCount = 5;
   config.enableBootAck = true;
   config.enableBoot = true;
   config.enableAutoStopAtBlockGap = true;
   USDHC_SetMmcBootConfig(USDHC, &config);
   endcode
 *
 * param base USDHC peripheral base address.
 * param config The MMC boot configuration information.
 */
void USDHC_SetMmcBootConfig(USDHC_Type *base, const usdhc_boot_config_t *config)
{
    assert(config != NULL);
    assert(config->ackTimeoutCount <= (USDHC_MMC_BOOT_DTOCV_ACK_MASK >> USDHC_MMC_BOOT_DTOCV_ACK_SHIFT));
    assert(config->blockCount <= (USDHC_MMC_BOOT_BOOT_BLK_CNT_MASK >> USDHC_MMC_BOOT_BOOT_BLK_CNT_SHIFT));

    uint32_t mmcboot = base->MMC_BOOT;

    mmcboot &= ~(USDHC_MMC_BOOT_DTOCV_ACK_MASK | USDHC_MMC_BOOT_BOOT_MODE_MASK | USDHC_MMC_BOOT_BOOT_BLK_CNT_MASK);
    mmcboot |= USDHC_MMC_BOOT_DTOCV_ACK(config->ackTimeoutCount) | USDHC_MMC_BOOT_BOOT_MODE(config->bootMode);

    if (config->enableBootAck)
    {
        mmcboot |= USDHC_MMC_BOOT_BOOT_ACK_MASK;
    }
    if (config->enableAutoStopAtBlockGap)
    {
        mmcboot |=
            USDHC_MMC_BOOT_AUTO_SABG_EN_MASK | USDHC_MMC_BOOT_BOOT_BLK_CNT(USDHC_MAX_BLOCK_COUNT - config->blockCount);
        /* always set the block count to USDHC_MAX_BLOCK_COUNT to use auto stop at block gap feature */
        base->BLK_ATT = ((base->BLK_ATT & ~(USDHC_BLK_ATT_BLKSIZE_MASK | USDHC_BLK_ATT_BLKCNT_MASK)) |
                         (USDHC_BLK_ATT_BLKSIZE(config->blockSize) | USDHC_BLK_ATT_BLKCNT(USDHC_MAX_BLOCK_COUNT)));
    }
    else
    {
        base->BLK_ATT = ((base->BLK_ATT & ~(USDHC_BLK_ATT_BLKSIZE_MASK | USDHC_BLK_ATT_BLKCNT_MASK)) |
                         (USDHC_BLK_ATT_BLKSIZE(config->blockSize) | USDHC_BLK_ATT_BLKCNT(config->blockCount)));
    }

    base->MMC_BOOT = mmcboot;
}

/*!
 * brief Sets the ADMA1 descriptor table configuration.
 *
 * param admaTable Adma table address.
 * param admaTableWords Adma table length.
 * param dataBufferAddr Data buffer address.
 * param dataBytes Data length.
 * param flags ADAM descriptor flag, used to indicate to create multiple or single descriptor, please
 *  reference _usdhc_adma_flag.
 * retval kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data.
 * retval kStatus_Success Operate successfully.
 */
status_t USDHC_SetADMA1Descriptor(
    uint32_t *admaTable, uint32_t admaTableWords, const uint32_t *dataBufferAddr, uint32_t dataBytes, uint32_t flags)
{
    assert(NULL != admaTable);
    assert(NULL != dataBufferAddr);

    uint32_t miniEntries, startEntries = 0UL,
                          maxEntries = (admaTableWords * sizeof(uint32_t)) / sizeof(usdhc_adma1_descriptor_t);
    usdhc_adma1_descriptor_t *adma1EntryAddress = (usdhc_adma1_descriptor_t *)(uint32_t)(admaTable);
    uint32_t i, dmaBufferLen = 0UL;
    const uint32_t *data = dataBufferAddr;

    if (((uint32_t)data % USDHC_ADMA1_ADDRESS_ALIGN) != 0UL)
    {
        return kStatus_USDHC_DMADataAddrNotAlign;
    }

    if (flags == (uint32_t)kUSDHC_AdmaDescriptorMultipleFlag)
    {
        return kStatus_USDHC_NotSupport;
    }
    /*
     * Add non aligned access support ,user need make sure your buffer size is big
     * enough to hold the data,in other words,user need make sure the buffer size
     * is 4 byte aligned
     */
    if (dataBytes % sizeof(uint32_t) != 0UL)
    {
        /* make the data length as word-aligned */
        dataBytes += sizeof(uint32_t) - (dataBytes % sizeof(uint32_t));
    }

    /* Check if ADMA descriptor's number is enough. */
    if ((dataBytes % USDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY) == 0UL)
    {
        miniEntries = dataBytes / USDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY;
    }
    else
    {
        miniEntries = ((dataBytes / USDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY) + 1UL);
    }

    /* ADMA1 needs two descriptors to finish a transfer */
    miniEntries <<= 1UL;

    if (miniEntries + startEntries > maxEntries)
    {
        return kStatus_OutOfRange;
    }

    for (i = startEntries; i < (miniEntries + startEntries); i += 2UL)
    {
        if (dataBytes > USDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY)
        {
            dmaBufferLen = USDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY;
        }
        else
        {
            dmaBufferLen = dataBytes;
        }

        adma1EntryAddress[i] = (dmaBufferLen << USDHC_ADMA1_DESCRIPTOR_LENGTH_SHIFT);
        adma1EntryAddress[i] |= (uint32_t)kUSDHC_Adma1DescriptorTypeSetLength;
        adma1EntryAddress[i + 1UL] = (uint32_t)(data);
        adma1EntryAddress[i + 1UL] |=
            (uint32_t)kUSDHC_Adma1DescriptorTypeTransfer | (uint32_t)kUSDHC_Adma1DescriptorInterrupFlag;
        data = (uint32_t *)((uint32_t)data + dmaBufferLen);
        dataBytes -= dmaBufferLen;
    }
    /* the end of the descriptor */
    adma1EntryAddress[i - 1UL] |= (uint32_t)kUSDHC_Adma1DescriptorEndFlag;

    return kStatus_Success;
}

/*!
 * brief Sets the ADMA2 descriptor table configuration.
 *
 * param admaTable Adma table address.
 * param admaTableWords Adma table length.
 * param dataBufferAddr Data buffer address.
 * param dataBytes Data Data length.
 * param flags ADAM descriptor flag, used to indicate to create multiple or single descriptor, please
 *  reference _usdhc_adma_flag.
 * retval kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data.
 * retval kStatus_Success Operate successfully.
 */
status_t USDHC_SetADMA2Descriptor(
    uint32_t *admaTable, uint32_t admaTableWords, const uint32_t *dataBufferAddr, uint32_t dataBytes, uint32_t flags)
{
    assert(NULL != admaTable);
    assert(NULL != dataBufferAddr);

    uint32_t miniEntries, startEntries = 0UL,
                          maxEntries = (admaTableWords * sizeof(uint32_t)) / sizeof(usdhc_adma2_descriptor_t);
    usdhc_adma2_descriptor_t *adma2EntryAddress = (usdhc_adma2_descriptor_t *)(uint32_t)(admaTable);
    uint32_t i, dmaBufferLen = 0UL;
    const uint32_t *data = dataBufferAddr;

    if (((uint32_t)data % USDHC_ADMA2_ADDRESS_ALIGN) != 0UL)
    {
        return kStatus_USDHC_DMADataAddrNotAlign;
    }
    /*
     * Add non aligned access support ,user need make sure your buffer size is big
     * enough to hold the data,in other words,user need make sure the buffer size
     * is 4 byte aligned
     */
    if (dataBytes % sizeof(uint32_t) != 0UL)
    {
        /* make the data length as word-aligned */
        dataBytes += sizeof(uint32_t) - (dataBytes % sizeof(uint32_t));
    }

    /* Check if ADMA descriptor's number is enough. */
    if ((dataBytes % USDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY) == 0UL)
    {
        miniEntries = dataBytes / USDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY;
    }
    else
    {
        miniEntries = ((dataBytes / USDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY) + 1UL);
    }
    /* calucate the start entry for multiple descriptor mode, ADMA engine is not stop, so update the descriptor
    data adress and data size is enough */
    if (flags == (uint32_t)kUSDHC_AdmaDescriptorMultipleFlag)
    {
        for (i = 0UL; i < maxEntries; i++)
        {
            if ((adma2EntryAddress[i].attribute & (uint32_t)kUSDHC_Adma2DescriptorValidFlag) == 0UL)
            {
                break;
            }
        }
        startEntries = i;
        /* add one entry for dummy entry */
        miniEntries += 1UL;
    }

    if ((miniEntries + startEntries) > maxEntries)
    {
        return kStatus_OutOfRange;
    }

    for (i = startEntries; i < (miniEntries + startEntries); i++)
    {
        if (dataBytes > USDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY)
        {
            dmaBufferLen = USDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY;
        }
        else
        {
            dmaBufferLen = (dataBytes == 0UL ? sizeof(uint32_t) :
                                               dataBytes); /* adma don't support 0 data length transfer descriptor */
        }

        /* Each descriptor for ADMA2 is 64-bit in length */
        adma2EntryAddress[i].address   = (dataBytes == 0UL) ? &s_usdhcBootDummy : data;
        adma2EntryAddress[i].attribute = (dmaBufferLen << USDHC_ADMA2_DESCRIPTOR_LENGTH_SHIFT);
        adma2EntryAddress[i].attribute |=
            (dataBytes == 0UL) ?
                0UL :
                ((uint32_t)kUSDHC_Adma2DescriptorTypeTransfer | (uint32_t)kUSDHC_Adma2DescriptorInterruptFlag);
        data = (uint32_t *)((uint32_t)data + dmaBufferLen);

        if (dataBytes != 0UL)
        {
            dataBytes -= dmaBufferLen;
        }
    }

    /* add a dummy valid ADMA descriptor for multiple descriptor mode, this is useful when transfer boot data, the ADMA
    engine
    will not stop at block gap */
    if (flags == (uint32_t)kUSDHC_AdmaDescriptorMultipleFlag)
    {
        adma2EntryAddress[startEntries + 1UL].attribute |= (uint32_t)kUSDHC_Adma2DescriptorTypeTransfer;
    }
    else
    {
        /* set the end bit */
        adma2EntryAddress[i - 1UL].attribute |= (uint32_t)kUSDHC_Adma2DescriptorEndFlag;
    }

    return kStatus_Success;
}

/*!
 * brief Internal DMA configuration.
 * This function is used to config the USDHC DMA related registers.
 * param base USDHC peripheral base address.
 * param adma configuration
 * param dataAddr transfer data address, a simple DMA parameter, if ADMA is used, leave it to NULL.
 * param enAutoCmd23 flag to indicate Auto CMD23 is enable or not, a simple DMA parameter,if ADMA is used, leave it to
 * false.
 * retval kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data.
 * retval kStatus_Success Operate successfully.
 */
status_t USDHC_SetInternalDmaConfig(USDHC_Type *base,
                                    usdhc_adma_config_t *dmaConfig,
                                    const uint32_t *dataAddr,
                                    bool enAutoCmd23)
{
    assert(dmaConfig != NULL);
    assert(dataAddr != NULL);
    assert((NULL != dmaConfig->admaTable) &&
           (((USDHC_ADMA_TABLE_ADDRESS_ALIGN - 1U) & (uint32_t)dmaConfig->admaTable) == 0UL));

#if FSL_FEATURE_USDHC_HAS_EXT_DMA
    /* disable the external DMA if support */
    base->VEND_SPEC &= ~USDHC_VEND_SPEC_EXT_DMA_EN_MASK;
#endif

    if (dmaConfig->dmaMode == kUSDHC_DmaModeSimple)
    {
        /* check DMA data buffer address align or not */
        if (((uint32_t)dataAddr % USDHC_ADMA2_ADDRESS_ALIGN) != 0UL)
        {
            return kStatus_USDHC_DMADataAddrNotAlign;
        }
        /* in simple DMA mode if use auto CMD23, address should load to ADMA addr,
             and block count should load to DS_ADDR*/
        if (enAutoCmd23)
        {
            base->ADMA_SYS_ADDR = USDHC_ADDR_CPU_2_DMA((uint32_t)dataAddr);
        }
        else
        {
            base->DS_ADDR = USDHC_ADDR_CPU_2_DMA((uint32_t)dataAddr);
        }
    }
    else
    {
        /* When use ADMA, disable simple DMA */
        base->DS_ADDR       = 0UL;
        base->ADMA_SYS_ADDR = USDHC_ADDR_CPU_2_DMA((uint32_t)(dmaConfig->admaTable));
    }

#if (defined(FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN) && FSL_FEATURE_USDHC_HAS_NO_RW_BURST_LEN)
    /* select DMA mode and config the burst length */
    base->PROT_CTRL &= ~(USDHC_PROT_CTRL_DMASEL_MASK);
    base->PROT_CTRL |= USDHC_PROT_CTRL_DMASEL(dmaConfig->dmaMode);
#else
    /* select DMA mode and config the burst length */
    base->PROT_CTRL &= ~(USDHC_PROT_CTRL_DMASEL_MASK | USDHC_PROT_CTRL_BURST_LEN_EN_MASK);
    base->PROT_CTRL |= USDHC_PROT_CTRL_DMASEL(dmaConfig->dmaMode) | USDHC_PROT_CTRL_BURST_LEN_EN(dmaConfig->burstLen);
#endif
    /* enable DMA */
    base->MIX_CTRL |= USDHC_MIX_CTRL_DMAEN_MASK;

    return kStatus_Success;
}

/*!
 * brief Sets the DMA descriptor table configuration.
 * A high level DMA descriptor configuration function.
 * param base USDHC peripheral base address.
 * param adma configuration
 * param data Data descriptor
 * param flags ADAM descriptor flag, used to indicate to create multiple or single descriptor, please
 *  reference _usdhc_adma_flag
 * retval kStatus_OutOfRange ADMA descriptor table length isn't enough to describe data.
 * retval kStatus_Success Operate successfully.
 */
status_t USDHC_SetAdmaTableConfig(USDHC_Type *base,
                                  usdhc_adma_config_t *dmaConfig,
                                  usdhc_data_t *dataConfig,
                                  uint32_t flags)
{
    assert(NULL != dmaConfig);
    assert((NULL != dmaConfig->admaTable) &&
           (((USDHC_ADMA_TABLE_ADDRESS_ALIGN - 1U) & (uint32_t)dmaConfig->admaTable) == 0UL));
    assert(NULL != dataConfig);

    status_t error = kStatus_Fail;
    uint32_t bootDummyOffset =
        dataConfig->dataType == (uint32_t)kUSDHC_TransferDataBootcontinous ? sizeof(uint32_t) : 0UL;
    const uint32_t *data = (const uint32_t *)USDHC_ADDR_CPU_2_DMA((uint32_t)(
        (uint32_t)((dataConfig->rxData == NULL) ? dataConfig->txData : dataConfig->rxData) + bootDummyOffset));
    uint32_t blockSize   = dataConfig->blockSize * dataConfig->blockCount - bootDummyOffset;

#if FSL_FEATURE_USDHC_HAS_EXT_DMA
    if (dmaConfig->dmaMode == kUSDHC_ExternalDMA)
    {
        /* enable the external DMA */
        base->VEND_SPEC |= USDHC_VEND_SPEC_EXT_DMA_EN_MASK;
    }
    else
#endif
        if (dmaConfig->dmaMode == kUSDHC_DmaModeSimple)
    {
        error = kStatus_Success;
    }
    else if (dmaConfig->dmaMode == kUSDHC_DmaModeAdma1)
    {
        error = USDHC_SetADMA1Descriptor(dmaConfig->admaTable, dmaConfig->admaTableWords, data, blockSize, flags);
    }
    /* ADMA2 */
    else
    {
        error = USDHC_SetADMA2Descriptor(dmaConfig->admaTable, dmaConfig->admaTableWords, data, blockSize, flags);
    }

    /* for internal dma, internal DMA configurations should not update the configurations when continous transfer the
     * boot data, only the DMA descriptor need update */
    if ((dmaConfig->dmaMode != kUSDHC_ExternalDMA) && (error == kStatus_Success) &&
        (dataConfig->dataType != (uint32_t)kUSDHC_TransferDataBootcontinous))
    {
        error = USDHC_SetInternalDmaConfig(base, dmaConfig, data, dataConfig->enableAutoCommand23);
    }

    return error;
}

/*!
 * brief Transfers the command/data using a blocking method.
 *
 * This function waits until the command response/data is received or the USDHC encounters an error by polling the
 * status
 * flag.
 * The application must not call this API in multiple threads at the same time. Because of that this API doesn't support
 * the re-entry mechanism.
 *
 * note There is no need to call the API 'USDHC_TransferCreateHandle' when calling this API.
 *
 * param base USDHC peripheral base address.
 * param adma configuration
 * param transfer Transfer content.
 * retval kStatus_InvalidArgument Argument is invalid.
 * retval kStatus_USDHC_PrepareAdmaDescriptorFailed Prepare ADMA descriptor failed.
 * retval kStatus_USDHC_SendCommandFailed Send command failed.
 * retval kStatus_USDHC_TransferDataFailed Transfer data failed.
 * retval kStatus_Success Operate successfully.
 */
status_t USDHC_TransferBlocking(USDHC_Type *base, usdhc_adma_config_t *dmaConfig, usdhc_transfer_t *transfer)
{
    assert(transfer != NULL);

    status_t error           = kStatus_Fail;
    usdhc_command_t *command = transfer->command;
    usdhc_data_t *data       = transfer->data;
    bool enDMA               = true;
    bool executeTuning       = ((data == NULL) ? false : data->dataType == (uint32_t)kUSDHC_TransferDataTuning);
    uint32_t transferFlags   = (uint32_t)kUSDHC_CommandOnly;
    size_t blockSize         = 0U;
    size_t blockCount        = 0U;

#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE)
    /*check re-tuning request*/
    if ((USDHC_GetInterruptStatusFlags(base) & (uint32_t)kUSDHC_ReTuningEventFlag) != 0UL)
    {
        USDHC_ClearInterruptStatusFlags(base, kUSDHC_ReTuningEventFlag);
        return kStatus_USDHC_ReTuningRequest;
    }
#endif

    if (data != NULL)
    {
        /* Update ADMA descriptor table according to different DMA mode(no DMA, ADMA1, ADMA2).*/
        if ((dmaConfig != NULL) && (!executeTuning))
        {
            error = USDHC_SetAdmaTableConfig(base, dmaConfig, data,
                                             (uint32_t)(IS_USDHC_FLAG_SET(data->dataType, kUSDHC_TransferDataBoot) ?
                                                            kUSDHC_AdmaDescriptorMultipleFlag :
                                                            kUSDHC_AdmaDescriptorSingleFlag));
        }
        blockSize     = data->blockSize;
        blockCount    = data->blockCount;
        transferFlags = data->enableAutoCommand12 ? (uint32_t)kUSDHC_DataWithAutoCmd12 : 0U;
        transferFlags |= data->enableAutoCommand23 ? (uint32_t)kUSDHC_DataWithAutoCmd23 : 0U;
        transferFlags |= data->txData != NULL ? (uint32_t)kUSDHC_CommandAndTxData : (uint32_t)kUSDHC_CommandAndRxData;
        transferFlags |= data->dataType == (uint8_t)kUSDHC_TransferDataBoot ? (uint32_t)kUSDHC_BootData : 0U;
        transferFlags |=
            data->dataType == (uint8_t)kUSDHC_TransferDataBootcontinous ? (uint32_t)kUSDHC_BootDataContinuous : 0U;

        command->flags |= (uint32_t)kUSDHC_DataPresentFlag;
    }

    /* if the DMA desciptor configure fail or not needed , disable it */
    if (error != kStatus_Success)
    {
        enDMA = false;
        /* disable DMA, using polling mode in this situation */
        USDHC_EnableInternalDMA(base, false);
    }
#if defined(FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL) && FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL
    else
    {
        if (data->txData != NULL)
        {
            /* clear the DCACHE */
            DCACHE_CleanByRange((uint32_t)data->txData, (data->blockSize) * (data->blockCount));
        }
        else
        {
            /* clear the DCACHE */
            DCACHE_CleanInvalidateByRange((uint32_t)data->rxData, (data->blockSize) * (data->blockCount));
        }
    }
#endif

    /* config the data transfer parameter */
    error = USDHC_SetTransferConfig(base, transferFlags, blockSize, blockCount);
    if (error != kStatus_Success)
    {
        return error;
    }
    /* send command first */
    USDHC_SendCommand(base, command);
    /* wait command done */
    error =
        USDHC_WaitCommandDone(base, command, (data == NULL) || (data->dataType == (uint32_t)kUSDHC_TransferDataNormal));
    if (kStatus_Success != error)
    {
        return kStatus_USDHC_SendCommandFailed;
    }

    /* wait transfer data finsih */
    if (data != NULL)
    {
        error = USDHC_TransferDataBlocking(base, data, enDMA);
        if (kStatus_Success != error)
        {
            return error;
        }
    }

    return kStatus_Success;
}

#if (defined FSL_USDHC_ENABLE_SCATTER_GATHER_TRANSFER) && FSL_USDHC_ENABLE_SCATTER_GATHER_TRANSFER
static status_t USDHC_SetScatterGatherAdmaTableConfig(USDHC_Type *base,
                                                      usdhc_adma_config_t *dmaConfig,
                                                      usdhc_scatter_gather_data_t *dataConfig,
                                                      uint32_t *totalTransferSize)
{
    assert(NULL != dmaConfig);
    assert((NULL != dmaConfig->admaTable) &&
           (((USDHC_ADMA_TABLE_ADDRESS_ALIGN - 1U) & (uint32_t)dmaConfig->admaTable) == 0UL));
    assert(NULL != dataConfig);

    status_t error                               = kStatus_Fail;
    uint32_t *admaDesBuffer                      = dmaConfig->admaTable;
    uint32_t admaDesLen                          = dmaConfig->admaTableWords;
    usdhc_scatter_gather_data_list_t *sgDataList = &dataConfig->sgData;
    uint32_t oneDescriptorMaxTransferSize        = dmaConfig->dmaMode == kUSDHC_DmaModeAdma1 ?
                                                USDHC_ADMA1_DESCRIPTOR_MAX_LENGTH_PER_ENTRY :
                                                USDHC_ADMA2_DESCRIPTOR_MAX_LENGTH_PER_ENTRY;
    uint32_t miniEntries = 0U;

    while (sgDataList != NULL)
    {
        if (dmaConfig->dmaMode == kUSDHC_DmaModeAdma1)
        {
            error = USDHC_SetADMA1Descriptor(admaDesBuffer, admaDesLen, sgDataList->dataAddr, sgDataList->dataSize, 0U);
        }
        /* ADMA2 */
        else
        {
            error = USDHC_SetADMA2Descriptor(admaDesBuffer, admaDesLen, sgDataList->dataAddr, sgDataList->dataSize, 0U);
        }

        if (error != kStatus_Success)
        {
            return kStatus_USDHC_PrepareAdmaDescriptorFailed;
        }

#if defined(FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL) && FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL
        if (dataConfig->dataDirection == kUSDHC_TransferDirectionSend)
        {
            /* clear the DCACHE */
            DCACHE_CleanByRange((uint32_t)sgDataList->dataAddr, sgDataList->dataSize);
        }
        else
        {
            /* clear the DCACHE */
            DCACHE_CleanInvalidateByRange((uint32_t)sgDataList->dataAddr, sgDataList->dataSize);
        }
#endif

        *totalTransferSize += sgDataList->dataSize;
        if (sgDataList->dataList != NULL)
        {
            if ((sgDataList->dataSize % oneDescriptorMaxTransferSize) == 0UL)
            {
                miniEntries = sgDataList->dataSize / oneDescriptorMaxTransferSize;
            }
            else
            {
                miniEntries = ((sgDataList->dataSize / oneDescriptorMaxTransferSize) + 1UL);
            }
            if (dmaConfig->dmaMode == kUSDHC_DmaModeAdma1)
            {
                admaDesBuffer[miniEntries * 2U - 1U] &= ~kUSDHC_Adma1DescriptorEndFlag;
            }
            else
            {
                admaDesBuffer[miniEntries * 2U - 2U] &= ~kUSDHC_Adma2DescriptorEndFlag;
            }
            admaDesBuffer += miniEntries * 2U;
            admaDesLen -= miniEntries * 2U;
        }

        sgDataList = sgDataList->dataList;
    }

    base->DS_ADDR       = 0UL;
    base->ADMA_SYS_ADDR = (uint32_t)(dmaConfig->admaTable);

    /* select DMA mode and config the burst length */
    base->PROT_CTRL &= ~(USDHC_PROT_CTRL_DMASEL_MASK);
    base->PROT_CTRL |= USDHC_PROT_CTRL_DMASEL(dmaConfig->dmaMode);

    /* enable DMA */
    base->MIX_CTRL |= USDHC_MIX_CTRL_DMAEN_MASK;

    return error;
}

/*!
 * brief Transfers the command/scatter gather data using an interrupt and an asynchronous method.
 *
 * This function sends a command and data and returns immediately. It doesn't wait for the transfer to complete or
 * to encounter an error. The application must not call this API in multiple threads at the same time. Because of that
 * this API doesn't support the re-entry mechanism.
 * This function is target for the application would like to have scatter gather buffer to be transferred within one
 * read/write request, non scatter gather buffer is support by this function also.
 *
 * note Call API @ref USDHC_TransferCreateHandle when calling this API.
 *
 * param base USDHC peripheral base address.
 * param handle USDHC handle.
 * param dmaConfig adma configurations, must be not NULL, since the function is target for ADMA only.
 * param transfer scatter gather transfer content.
 *
 * retval #kStatus_InvalidArgument Argument is invalid.
 * retval #kStatus_USDHC_BusyTransferring Busy transferring.
 * retval #kStatus_USDHC_PrepareAdmaDescriptorFailed Prepare ADMA descriptor failed.
 * retval #kStatus_Success Operate successfully.
 */
status_t USDHC_TransferScatterGatherADMANonBlocking(USDHC_Type *base,
                                                    usdhc_handle_t *handle,
                                                    usdhc_adma_config_t *dmaConfig,
                                                    usdhc_scatter_gather_transfer_t *transfer)
{
    assert(handle != NULL);
    assert(transfer != NULL);
    assert(dmaConfig != NULL);

    status_t error                                 = kStatus_Fail;
    usdhc_command_t *command                       = transfer->command;
    uint32_t totalTransferSize                     = 0U;
    uint32_t transferFlags                         = kUSDHC_CommandOnly;
    size_t blockSize                               = 0U;
    size_t blockCount                              = 0U;
    usdhc_scatter_gather_data_t *scatterGatherData = transfer->data;
    bool enDMA                                     = false;

    /* check data inhibit flag */
    if (IS_USDHC_FLAG_SET(base->PRES_STATE, kUSDHC_CommandInhibitFlag))
    {
        return kStatus_USDHC_BusyTransferring;
    }

    handle->command = command;
    handle->data    = scatterGatherData;
    /* transferredWords will only be updated in ISR when transfer way is DATAPORT. */
    handle->transferredWords = 0UL;

    /* Update ADMA descriptor table according to different DMA mode(ADMA1, ADMA2).*/
    if (scatterGatherData != NULL)
    {
        if (scatterGatherData->sgData.dataAddr == NULL)
        {
            return kStatus_InvalidArgument;
        }

        if (scatterGatherData->dataType != (uint32_t)kUSDHC_TransferDataTuning)
        {
            if (USDHC_SetScatterGatherAdmaTableConfig(base, dmaConfig, transfer->data, &totalTransferSize) !=
                kStatus_Success)
            {
                return kStatus_USDHC_PrepareAdmaDescriptorFailed;
            }

            enDMA = true;
        }
        blockSize     = scatterGatherData->blockSize;
        blockCount    = totalTransferSize / scatterGatherData->blockSize;
        transferFlags = scatterGatherData->enableAutoCommand12 ? kUSDHC_DataWithAutoCmd12 : 0U;
        transferFlags |= scatterGatherData->enableAutoCommand23 ? kUSDHC_DataWithAutoCmd23 : 0U;
        transferFlags |= scatterGatherData->dataDirection == kUSDHC_TransferDirectionSend ? kUSDHC_CommandAndTxData :
                                                                                            kUSDHC_CommandAndRxData;
        command->flags |= kUSDHC_DataPresentFlag;
    }

    error = USDHC_SetTransferConfig(base, transferFlags, blockSize, blockCount);
    if (error != kStatus_Success)
    {
        return error;
    }

    /* enable interrupt per transfer request */
    if (scatterGatherData != NULL)
    {
        USDHC_ClearInterruptStatusFlags(
            base, (uint32_t)(enDMA == false ? kUSDHC_DataFlag : kUSDHC_DataDMAFlag | kUSDHC_DmaCompleteFlag) |
                      (uint32_t)kUSDHC_CommandFlag);
        USDHC_EnableInterruptSignal(
            base, (uint32_t)(enDMA == false ? kUSDHC_DataFlag : kUSDHC_DataDMAFlag | kUSDHC_DmaCompleteFlag) |
                      (uint32_t)kUSDHC_CommandFlag);
    }
    else
    {
        USDHC_ClearInterruptStatusFlags(base, kUSDHC_CommandFlag);
        USDHC_EnableInterruptSignal(base, kUSDHC_CommandFlag);
    }

    /* send command first */
    USDHC_SendCommand(base, command);

    return kStatus_Success;
}
#else
/*!
 * brief Transfers the command/data using an interrupt and an asynchronous method.
 *
 * This function sends a command and data and returns immediately. It doesn't wait the transfer complete or encounter an
 * error.
 * The application must not call this API in multiple threads at the same time. Because of that this API doesn't support
 * the re-entry mechanism.
 *
 * note Call the API 'USDHC_TransferCreateHandle' when calling this API.
 *
 * param base USDHC peripheral base address.
 * param handle USDHC handle.
 * param adma configuration.
 * param transfer Transfer content.
 * retval kStatus_InvalidArgument Argument is invalid.
 * retval kStatus_USDHC_BusyTransferring Busy transferring.
 * retval kStatus_USDHC_PrepareAdmaDescriptorFailed Prepare ADMA descriptor failed.
 * retval kStatus_Success Operate successfully.
 */
status_t USDHC_TransferNonBlocking(USDHC_Type *base,
                                   usdhc_handle_t *handle,
                                   usdhc_adma_config_t *dmaConfig,
                                   usdhc_transfer_t *transfer)
{
    assert(handle != NULL);
    assert(transfer != NULL);

    status_t error           = kStatus_Fail;
    usdhc_command_t *command = transfer->command;
    usdhc_data_t *data       = transfer->data;
    bool executeTuning       = ((data == NULL) ? false : data->dataType == (uint32_t)kUSDHC_TransferDataTuning);
    bool enDMA               = true;
    uint32_t transferFlags   = (uint32_t)kUSDHC_CommandOnly;
    size_t blockSize         = 0U;
    size_t blockCount        = 0U;

#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE)
    /*check re-tuning request*/
    if ((USDHC_GetInterruptStatusFlags(base) & ((uint32_t)kUSDHC_ReTuningEventFlag)) != 0UL)
    {
        USDHC_ClearInterruptStatusFlags(base, kUSDHC_ReTuningEventFlag);
        return kStatus_USDHC_ReTuningRequest;
    }
#endif
    /* Save command and data into handle before transferring. */

    handle->command = command;
    handle->data    = data;
    /* transferredWords will only be updated in ISR when transfer way is DATAPORT. */
    handle->transferredWords = 0UL;

    if (data != NULL)
    {
        /* Update ADMA descriptor table according to different DMA mode(no DMA, ADMA1, ADMA2).*/
        if ((dmaConfig != NULL) && (!executeTuning))
        {
            error = USDHC_SetAdmaTableConfig(
                base, dmaConfig, data,
                (uint32_t)(IS_USDHC_FLAG_SET(data->dataType, (uint32_t)kUSDHC_TransferDataBoot) ?
                               kUSDHC_AdmaDescriptorMultipleFlag :
                               kUSDHC_AdmaDescriptorSingleFlag));
        }

        blockSize     = data->blockSize;
        blockCount    = data->blockCount;
        transferFlags = data->enableAutoCommand12 ? (uint32_t)kUSDHC_DataWithAutoCmd12 : 0U;
        transferFlags |= data->enableAutoCommand23 ? (uint32_t)kUSDHC_DataWithAutoCmd23 : 0U;
        transferFlags |= data->txData != NULL ? (uint32_t)kUSDHC_CommandAndTxData : (uint32_t)kUSDHC_CommandAndRxData;
        transferFlags |= data->dataType == (uint8_t)kUSDHC_TransferDataBoot ? (uint32_t)kUSDHC_BootData : 0U;
        transferFlags |=
            data->dataType == (uint8_t)kUSDHC_TransferDataBootcontinous ? (uint32_t)kUSDHC_BootDataContinuous : 0U;

        command->flags |= (uint32_t)kUSDHC_DataPresentFlag;
    }

    /* if the DMA desciptor configure fail or not needed , disable it */
    if (error != kStatus_Success)
    {
        /* disable DMA, using polling mode in this situation */
        USDHC_EnableInternalDMA(base, false);
        enDMA = false;
    }
#if defined(FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL) && FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL
    else
    {
        if (data->txData != NULL)
        {
            /* clear the DCACHE */
            DCACHE_CleanByRange((uint32_t)data->txData, (data->blockSize) * (data->blockCount));
        }
        else
        {
            /* clear the DCACHE */
            DCACHE_CleanInvalidateByRange((uint32_t)data->rxData, (data->blockSize) * (data->blockCount));
        }
    }
#endif

    /* config the data transfer parameter */
    error = USDHC_SetTransferConfig(base, transferFlags, blockSize, blockCount);
    if (error != kStatus_Success)
    {
        return error;
    }

    /* enable interrupt per transfer request */
    if (handle->data != NULL)
    {
        USDHC_ClearInterruptStatusFlags(
            base, (uint32_t)(enDMA == false ? kUSDHC_DataFlag : kUSDHC_DataDMAFlag) | (uint32_t)kUSDHC_CommandFlag |
                      (uint32_t)(data->dataType == (uint8_t)kUSDHC_TransferDataBootcontinous ?
                                     (uint32_t)kUSDHC_DmaCompleteFlag :
                                     0U));
        USDHC_EnableInterruptSignal(base, (uint32_t)(enDMA == false ? kUSDHC_DataFlag : kUSDHC_DataDMAFlag) |
                                              (uint32_t)kUSDHC_CommandFlag |
                                              (uint32_t)(data->dataType == (uint8_t)kUSDHC_TransferDataBootcontinous ?
                                                             (uint32_t)kUSDHC_DmaCompleteFlag :
                                                             0U));
    }
    else
    {
        USDHC_ClearInterruptStatusFlags(base, kUSDHC_CommandFlag);
        USDHC_EnableInterruptSignal(base, kUSDHC_CommandFlag);
    }

    /* send command first */
    USDHC_SendCommand(base, command);

    return kStatus_Success;
}
#endif

#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE)
/*!
 * brief manual tuning trigger or abort
 * User should handle the tuning cmd and find the boundary of the delay
 * then calucate a average value which will be config to the CLK_TUNE_CTRL_STATUS
 * This function should called before USDHC_AdjustDelayforSDR104 function
 * param base USDHC peripheral base address.
 * param tuning enable flag
 */
void USDHC_EnableManualTuning(USDHC_Type *base, bool enable)
{
    if (enable)
    {
        /* make sure std_tun_en bit is clear */
        base->TUNING_CTRL &= ~USDHC_TUNING_CTRL_STD_TUNING_EN_MASK;
        /* disable auto tuning here */
        base->MIX_CTRL &= ~USDHC_MIX_CTRL_AUTO_TUNE_EN_MASK;
        /* execute tuning for SDR104 mode */
        base->MIX_CTRL |= USDHC_MIX_CTRL_EXE_TUNE_MASK | USDHC_MIX_CTRL_SMP_CLK_SEL_MASK;
    }
    else
    { /* abort the tuning */
        base->MIX_CTRL &= ~USDHC_MIX_CTRL_EXE_TUNE_MASK;
    }
}

/*!
 * brief the SDR104 mode delay setting adjust
 * This function should called after USDHC_ManualTuningForSDR104
 * param base USDHC peripheral base address.
 * param delay setting configuration
 * retval kStatus_Fail config the delay setting fail
 * retval kStatus_Success config the delay setting success
 */
status_t USDHC_AdjustDelayForManualTuning(USDHC_Type *base, uint32_t delay)
{
    uint32_t clkTuneCtrl = 0UL;

    clkTuneCtrl = base->CLK_TUNE_CTRL_STATUS;

    clkTuneCtrl &= ~USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_PRE_MASK;

    clkTuneCtrl |= USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_PRE(delay);

    /* load the delay setting */
    base->CLK_TUNE_CTRL_STATUS = clkTuneCtrl;
    /* check delat setting error */
    if (IS_USDHC_FLAG_SET(base->CLK_TUNE_CTRL_STATUS,
                          USDHC_CLK_TUNE_CTRL_STATUS_PRE_ERR_MASK | USDHC_CLK_TUNE_CTRL_STATUS_NXT_ERR_MASK))
    {
        return kStatus_Fail;
    }

    return kStatus_Success;
}

/*!
 * brief The tuning delay cell setting.
 *
 * param base USDHC peripheral base address.
 * param preDelay Set the number of delay cells on the feedback clock between the feedback clock and CLK_PRE.
 * param outDelay Set the number of delay cells on the feedback clock between CLK_PRE and CLK_OUT.
 * param postDelay Set the number of delay cells on the feedback clock between CLK_OUT and CLK_POST.
 * retval kStatus_Fail config the delay setting fail
 * retval kStatus_Success config the delay setting success
 */
status_t USDHC_SetTuningDelay(USDHC_Type *base, uint32_t preDelay, uint32_t outDelay, uint32_t postDelay)
{
    assert(preDelay <=
           (USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_PRE_MASK >> USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_PRE_SHIFT));
    assert(outDelay <=
           (USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_OUT_MASK >> USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_OUT_SHIFT));
    assert(postDelay <=
           (USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_POST_MASK >> USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_POST_SHIFT));

    uint32_t clkTuneCtrl = 0UL;

    clkTuneCtrl = base->CLK_TUNE_CTRL_STATUS;

    clkTuneCtrl &=
        ~(USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_PRE_MASK | USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_OUT_MASK |
          USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_POST_MASK);

    clkTuneCtrl |= USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_PRE(preDelay) |
                   USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_OUT(outDelay) |
                   USDHC_CLK_TUNE_CTRL_STATUS_DLY_CELL_SET_POST(postDelay);

    /* load the delay setting */
    base->CLK_TUNE_CTRL_STATUS = clkTuneCtrl;
    /* check delat setting error */
    if (IS_USDHC_FLAG_SET(base->CLK_TUNE_CTRL_STATUS,
                          USDHC_CLK_TUNE_CTRL_STATUS_PRE_ERR_MASK | USDHC_CLK_TUNE_CTRL_STATUS_NXT_ERR_MASK))
    {
        return kStatus_Fail;
    }

    return kStatus_Success;
}

/*!
 * brief the enable standard tuning function
 * The standard tuning window and tuning counter use the default config
 * tuning cmd is send by the software, user need to check the tuning result
 * can be used for SDR50,SDR104,HS200 mode tuning
 * param base USDHC peripheral base address.
 * param tuning start tap
 * param tuning step
 * param enable/disable flag
 */
void USDHC_EnableStandardTuning(USDHC_Type *base, uint32_t tuningStartTap, uint32_t step, bool enable)
{
    uint32_t tuningCtrl = 0UL;

    if (enable)
    {
        /* feedback clock */
        base->MIX_CTRL |= USDHC_MIX_CTRL_FBCLK_SEL_MASK;
        /* config tuning start and step */
        tuningCtrl = base->TUNING_CTRL;
        tuningCtrl &= ~(USDHC_TUNING_CTRL_TUNING_START_TAP_MASK | USDHC_TUNING_CTRL_TUNING_STEP_MASK);
        tuningCtrl |= (USDHC_TUNING_CTRL_TUNING_START_TAP(tuningStartTap) | USDHC_TUNING_CTRL_TUNING_STEP(step) |
                       USDHC_TUNING_CTRL_STD_TUNING_EN_MASK);
        base->TUNING_CTRL = tuningCtrl;

        /* excute tuning */
        base->AUTOCMD12_ERR_STATUS |=
            (USDHC_AUTOCMD12_ERR_STATUS_EXECUTE_TUNING_MASK | USDHC_AUTOCMD12_ERR_STATUS_SMP_CLK_SEL_MASK);
    }
    else
    {
        /* disable the standard tuning */
        base->TUNING_CTRL &= ~USDHC_TUNING_CTRL_STD_TUNING_EN_MASK;
        /* clear excute tuning */
        base->AUTOCMD12_ERR_STATUS &=
            ~(USDHC_AUTOCMD12_ERR_STATUS_EXECUTE_TUNING_MASK | USDHC_AUTOCMD12_ERR_STATUS_SMP_CLK_SEL_MASK);
    }
}

#if FSL_FEATURE_USDHC_HAS_HS400_MODE
/*!
 * brief config the strobe DLL delay target and update interval
 *
 * param base USDHC peripheral base address.
 * param delayTarget delay target
 * param updateInterval update interval
 */
void USDHC_ConfigStrobeDLL(USDHC_Type *base, uint32_t delayTarget, uint32_t updateInterval)
{
    assert(delayTarget <= (USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_SLV_DLY_TARGET_MASK >>
                           USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT));

    /* reset strobe dll firstly */
    base->STROBE_DLL_CTRL |= USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_RESET_MASK;
    /* clear reset and other register fields */
    base->STROBE_DLL_CTRL = 0;
    /* configure the DELAY target and update interval */
    base->STROBE_DLL_CTRL |= USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_ENABLE_MASK |
                             USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_SLV_UPDATE_INT(updateInterval) |
                             USDHC_STROBE_DLL_CTRL_STROBE_DLL_CTRL_SLV_DLY_TARGET(delayTarget);

    while (
        (USDHC_GetStrobeDLLStatus(base) & (USDHC_STROBE_DLL_STATUS_STROBE_DLL_STS_SLV_LOCK_MASK |
                                           USDHC_STROBE_DLL_STATUS_STROBE_DLL_STS_REF_LOCK_MASK)) !=
        ((USDHC_STROBE_DLL_STATUS_STROBE_DLL_STS_SLV_LOCK_MASK | USDHC_STROBE_DLL_STATUS_STROBE_DLL_STS_REF_LOCK_MASK)))
    {
    }
}
#endif

/*!
 * brief the auto tuning enbale for CMD/DATA line
 *
 * param base USDHC peripheral base address.
 */
void USDHC_EnableAutoTuningForCmdAndData(USDHC_Type *base)
{
    uint32_t busWidth = (base->PROT_CTRL & USDHC_PROT_CTRL_DTW_MASK) >> USDHC_PROT_CTRL_DTW_SHIFT;

    base->VEND_SPEC2 |= USDHC_VEND_SPEC2_TUNING_CMD_EN_MASK;

    /* 1bit data width */
    if (busWidth == 0UL)
    {
        base->VEND_SPEC2 &= ~USDHC_VEND_SPEC2_TUNING_8bit_EN_MASK;
        base->VEND_SPEC2 |= USDHC_VEND_SPEC2_TUNING_1bit_EN_MASK;
    }
    /* 4bit data width */
    else if (busWidth == 1UL)
    {
        base->VEND_SPEC2 &= ~USDHC_VEND_SPEC2_TUNING_8bit_EN_MASK;
        base->VEND_SPEC2 &= ~USDHC_VEND_SPEC2_TUNING_1bit_EN_MASK;
    }
    /* 8bit data width */
    else
    {
        base->VEND_SPEC2 |= USDHC_VEND_SPEC2_TUNING_8bit_EN_MASK;
        base->VEND_SPEC2 &= ~USDHC_VEND_SPEC2_TUNING_1bit_EN_MASK;
    }
}
#endif /* FSL_FEATURE_USDHC_HAS_SDR50_MODE */

static void USDHC_TransferHandleCardDetect(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags)
{
    if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_CardInsertionFlag))
    {
        if (handle->callback.CardInserted != NULL)
        {
            handle->callback.CardInserted(base, handle->userData);
        }
    }
    else
    {
        if (handle->callback.CardRemoved != NULL)
        {
            handle->callback.CardRemoved(base, handle->userData);
        }
    }
}

static void USDHC_TransferHandleCommand(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags)
{
    assert(handle->command != NULL);

    if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_CommandErrorFlag))
    {
        if (handle->callback.TransferComplete != NULL)
        {
            handle->callback.TransferComplete(base, handle, kStatus_USDHC_SendCommandFailed, handle->userData);
        }
    }
    else
    {
        /* Receive response */
        if (kStatus_Success != USDHC_ReceiveCommandResponse(base, handle->command))
        {
            if (handle->callback.TransferComplete != NULL)
            {
                handle->callback.TransferComplete(base, handle, kStatus_USDHC_SendCommandFailed, handle->userData);
            }
        }
        else
        {
            if (handle->callback.TransferComplete != NULL)
            {
                handle->callback.TransferComplete(base, handle, kStatus_USDHC_SendCommandSuccess, handle->userData);
            }
        }
    }
    /* disable interrupt signal and reset command pointer */
    USDHC_DisableInterruptSignal(base, kUSDHC_CommandFlag);
    handle->command = NULL;
}

#if (defined FSL_USDHC_ENABLE_SCATTER_GATHER_TRANSFER) && FSL_USDHC_ENABLE_SCATTER_GATHER_TRANSFER
static void USDHC_TransferHandleData(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags)
{
    assert(handle->data != NULL);

    status_t transferStatus = kStatus_USDHC_BusyTransferring;

    if ((!(handle->data->enableIgnoreError)) &&
        (IS_USDHC_FLAG_SET(interruptFlags, (uint32_t)kUSDHC_DataErrorFlag | (uint32_t)kUSDHC_DmaErrorFlag)))
    {
        transferStatus = kStatus_USDHC_TransferDataFailed;
    }
    else
    {
        if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_BufferReadReadyFlag))
        {
            /* std tuning process only need to wait BRR */
            if (handle->data->dataType == (uint32_t)kUSDHC_TransferDataTuning)
            {
                transferStatus = kStatus_USDHC_TransferDataComplete;
            }
        }
        else
        {
            if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_DmaCompleteFlag))
            {
                transferStatus = kStatus_USDHC_TransferDMAComplete;
            }

            if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_DataCompleteFlag))
            {
                transferStatus = kStatus_USDHC_TransferDataComplete;

#if defined(FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL) && FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL
                if (handle->data->dataDirection == kUSDHC_TransferDirectionReceive)
                {
                    usdhc_scatter_gather_data_list_t *sgDataList = &handle->data->sgData;
                    while (sgDataList != NULL)
                    {
                        DCACHE_InvalidateByRange((uint32_t)sgDataList->dataAddr, sgDataList->dataSize);
                        sgDataList = sgDataList->dataList;
                    }
                }
#endif
            }
        }
    }

    if ((handle->callback.TransferComplete != NULL) && (transferStatus != kStatus_USDHC_BusyTransferring))
    {
        handle->callback.TransferComplete(base, handle, transferStatus, handle->userData);
        USDHC_DisableInterruptSignal(
            base, (uint32_t)kUSDHC_DataFlag | (uint32_t)kUSDHC_DataDMAFlag | (uint32_t)kUSDHC_DmaCompleteFlag);
        handle->data = NULL;
    }
}

#else
static void USDHC_TransferHandleData(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags)
{
    assert(handle->data != NULL);

    status_t transferStatus   = kStatus_USDHC_BusyTransferring;
    uint32_t transferredWords = handle->transferredWords;

    if ((!(handle->data->enableIgnoreError)) &&
        (IS_USDHC_FLAG_SET(interruptFlags, (uint32_t)kUSDHC_DataErrorFlag | (uint32_t)kUSDHC_DmaErrorFlag)))
    {
        transferStatus = kStatus_USDHC_TransferDataFailed;
    }
    else
    {
        if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_BufferReadReadyFlag))
        {
            /* std tuning process only need to wait BRR */
            if (handle->data->dataType == (uint32_t)kUSDHC_TransferDataTuning)
            {
                transferStatus = kStatus_USDHC_TransferDataComplete;
            }
            else
            {
                handle->transferredWords = USDHC_ReadDataPort(base, handle->data, transferredWords);
            }
        }
        else if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_BufferWriteReadyFlag))
        {
            handle->transferredWords = USDHC_WriteDataPort(base, handle->data, transferredWords);
        }
        else
        {
            if ((IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_DmaCompleteFlag)) &&
                (handle->data->dataType == (uint32_t)kUSDHC_TransferDataBootcontinous))
            {
                *(handle->data->rxData) = s_usdhcBootDummy;
            }

            if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_DataCompleteFlag))
            {
                transferStatus = kStatus_USDHC_TransferDataComplete;

#if defined(FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL) && FSL_SDK_ENABLE_DRIVER_CACHE_CONTROL
                if (handle->data->rxData != NULL)
                {
                    DCACHE_InvalidateByRange((uint32_t)(handle->data->rxData),
                                             (handle->data->blockSize) * (handle->data->blockCount));
                }
#endif
            }
        }
    }

    if ((handle->callback.TransferComplete != NULL) && (transferStatus != kStatus_USDHC_BusyTransferring))
    {
        handle->callback.TransferComplete(base, handle, transferStatus, handle->userData);
        USDHC_DisableInterruptSignal(base, (uint32_t)kUSDHC_DataFlag | (uint32_t)kUSDHC_DataDMAFlag);
        handle->data = NULL;
    }
}
#endif

static void USDHC_TransferHandleSdioInterrupt(USDHC_Type *base, usdhc_handle_t *handle)
{
    if (handle->callback.SdioInterrupt != NULL)
    {
        handle->callback.SdioInterrupt(base, handle->userData);
    }
}

#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE)
static void USDHC_TransferHandleReTuning(USDHC_Type *base, usdhc_handle_t *handle, uint32_t interruptFlags)
{
    assert(handle->callback.ReTuning != NULL);
    /* retuning request */
    if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_TuningErrorFlag))
    {
        handle->callback.ReTuning(base, handle->userData); /* retuning fail */
    }
}
#endif

static void USDHC_TransferHandleBlockGap(USDHC_Type *base, usdhc_handle_t *handle)
{
    if (handle->callback.BlockGap != NULL)
    {
        handle->callback.BlockGap(base, handle->userData);
    }
}

/*!
 * brief Creates the USDHC handle.
 *
 * param base USDHC peripheral base address.
 * param handle USDHC handle pointer.
 * param callback Structure pointer to contain all callback functions.
 * param userData Callback function parameter.
 */
void USDHC_TransferCreateHandle(USDHC_Type *base,
                                usdhc_handle_t *handle,
                                const usdhc_transfer_callback_t *callback,
                                void *userData)
{
    assert(handle != NULL);
    assert(callback != NULL);

    /* Zero the handle. */
    (void)memset(handle, 0, sizeof(*handle));

    /* Set the callback. */
    handle->callback.CardInserted     = callback->CardInserted;
    handle->callback.CardRemoved      = callback->CardRemoved;
    handle->callback.SdioInterrupt    = callback->SdioInterrupt;
    handle->callback.BlockGap         = callback->BlockGap;
    handle->callback.TransferComplete = callback->TransferComplete;
    handle->callback.ReTuning         = callback->ReTuning;
    handle->userData                  = userData;

    /* Save the handle in global variables to support the double weak mechanism. */
    s_usdhcHandle[USDHC_GetInstance(base)] = handle;

    /* save IRQ handler */
    s_usdhcIsr = USDHC_TransferHandleIRQ;

    (void)EnableIRQ(s_usdhcIRQ[USDHC_GetInstance(base)]);
}

/*!
 * brief IRQ handler for the USDHC.
 *
 * This function deals with the IRQs on the given host controller.
 *
 * param base USDHC peripheral base address.
 * param handle USDHC handle.
 */
void USDHC_TransferHandleIRQ(USDHC_Type *base, usdhc_handle_t *handle)
{
    assert(handle != NULL);

    uint32_t interruptFlags;

    interruptFlags = USDHC_GetEnabledInterruptStatusFlags(base);

    if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_CardDetectFlag))
    {
        USDHC_TransferHandleCardDetect(base, handle, interruptFlags);
    }
    if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_CommandFlag))
    {
        USDHC_TransferHandleCommand(base, handle, interruptFlags);
    }
    if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_DataFlag))
    {
        USDHC_TransferHandleData(base, handle, interruptFlags);
    }
    if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_CardInterruptFlag))
    {
        USDHC_TransferHandleSdioInterrupt(base, handle);
    }
    if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_BlockGapEventFlag))
    {
        USDHC_TransferHandleBlockGap(base, handle);
    }
#if defined(FSL_FEATURE_USDHC_HAS_SDR50_MODE) && (FSL_FEATURE_USDHC_HAS_SDR50_MODE)
    if (IS_USDHC_FLAG_SET(interruptFlags, kUSDHC_SDR104TuningFlag))
    {
        USDHC_TransferHandleReTuning(base, handle, interruptFlags);
    }
#endif
    USDHC_ClearInterruptStatusFlags(base, interruptFlags);
}

#ifdef USDHC0
void USDHC0_DriverIRQHandler(void);
void USDHC0_DriverIRQHandler(void)
{
    s_usdhcIsr(s_usdhcBase[0U], s_usdhcHandle[0U]);
    SDK_ISR_EXIT_BARRIER;
}
#endif

#ifdef USDHC1
void USDHC1_DriverIRQHandler(void);
void USDHC1_DriverIRQHandler(void)
{
    s_usdhcIsr(s_usdhcBase[1U], s_usdhcHandle[1U]);
    SDK_ISR_EXIT_BARRIER;
}
#endif

#ifdef USDHC2
void USDHC2_DriverIRQHandler(void);
void USDHC2_DriverIRQHandler(void)
{
    s_usdhcIsr(s_usdhcBase[2U], s_usdhcHandle[2U]);
    SDK_ISR_EXIT_BARRIER;
}

#endif