rt-thread/bsp/lpc55sxx/Libraries/LPC55S6X/middleware/sdmmc/inc/fsl_mmc.h

/*
 * Copyright (c) 2015, Freescale Semiconductor, Inc.
 * Copyright 2016-2018 NXP
 * All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#ifndef _FSL_MMC_H_
#define _FSL_MMC_H_

#include "fsl_sdmmc_common.h"

/*!
 * @addtogroup MMCCARD
 * @{
 */

/*******************************************************************************
 * Definitions
 ******************************************************************************/
/*! @brief MMC card flags */
enum _mmc_card_flag
{
    kMMC_SupportHighSpeed26MHZFlag = (1U << 0U),           /*!< Support high speed 26MHZ */
    kMMC_SupportHighSpeed52MHZFlag = (1U << 1U),           /*!< Support high speed 52MHZ */
    kMMC_SupportHighSpeedDDR52MHZ180V300VFlag = (1 << 2U), /*!< ddr 52MHZ 1.8V or 3.0V */
    kMMC_SupportHighSpeedDDR52MHZ120VFlag = (1 << 3U),     /*!< DDR 52MHZ 1.2V */
    kMMC_SupportHS200200MHZ180VFlag = (1 << 4U),           /*!< HS200 ,200MHZ,1.8V */
    kMMC_SupportHS200200MHZ120VFlag = (1 << 5U),           /*!< HS200, 200MHZ, 1.2V */
    kMMC_SupportHS400DDR200MHZ180VFlag = (1 << 6U),        /*!< HS400, DDR, 200MHZ,1.8V */
    kMMC_SupportHS400DDR200MHZ120VFlag = (1 << 7U),        /*!< HS400, DDR, 200MHZ,1.2V */
    kMMC_SupportHighCapacityFlag = (1U << 8U),             /*!< Support high capacity */
    kMMC_SupportAlternateBootFlag = (1U << 9U),            /*!< Support alternate boot */
    kMMC_SupportDDRBootFlag = (1U << 10U),                 /*!< support DDR boot flag*/
    kMMC_SupportHighSpeedBootFlag = (1U << 11U),           /*!< support high speed boot flag*/
};

/*!
 * @brief mmc card state
 *
 * Define the card structure including the necessary fields to identify and describe the card.
 */
typedef struct _mmc_card
{
    SDMMCHOST_CONFIG host;        /*!< Host information */
    mmccard_usr_param_t usrParam; /*!< user parameter */

    bool isHostReady;                /*!< Use this flag to indicate if need host re-init or not*/
    bool noInteralAlign;             /*!< use this flag to disable sdmmc align. If disable, sdmmc will not make sure the
                           data buffer address is word align, otherwise all the transfer are align to low level driver */
    uint32_t busClock_Hz;            /*!< MMC bus clock united in Hz */
    uint32_t relativeAddress;        /*!< Relative address of the card */
    bool enablePreDefinedBlockCount; /*!< Enable PRE-DEFINED block count when read/write */
    uint32_t flags;                  /*!< Capability flag in _mmc_card_flag */
    uint32_t rawCid[4U];             /*!< Raw CID content */
    uint32_t rawCsd[4U];             /*!< Raw CSD content */
    uint32_t rawExtendedCsd[MMC_EXTENDED_CSD_BYTES / 4U]; /*!< Raw MMC Extended CSD content */
    uint32_t ocr;                                         /*!< Raw OCR content */
    mmc_cid_t cid;                                        /*!< CID */
    mmc_csd_t csd;                                        /*!< CSD */
    mmc_extended_csd_t extendedCsd;                       /*!< Extended CSD */
    uint32_t blockSize;                                   /*!< Card block size */
    uint32_t userPartitionBlocks;                         /*!< Card total block number in user partition */
    uint32_t bootPartitionBlocks;                         /*!< Boot partition size united as block size */
    uint32_t eraseGroupBlocks;                            /*!< Erase group size united as block size */
    mmc_access_partition_t currentPartition;              /*!< Current access partition */
    mmc_voltage_window_t hostVoltageWindowVCCQ;           /*!< Host IO voltage window */
    mmc_voltage_window_t hostVoltageWindowVCC; /*!< application must set this value according to board specific */
    mmc_high_speed_timing_t busTiming;         /*!< indicate the current work timing mode*/
    mmc_data_bus_width_t busWidth;             /*!< indicate the current work bus width */
} mmc_card_t;

/*************************************************************************************************
 * API
 ************************************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif

/*!
 * @name MMCCARD Function
 * @{
 */

/*!
 * @brief Initializes the MMC card and host.
 *
 * @param card Card descriptor.
 *
 * @retval kStatus_SDMMC_HostNotReady host is not ready.
 * @retval kStatus_SDMMC_GoIdleFailed Go idle failed.
 * @retval kStatus_SDMMC_SendOperationConditionFailed Send operation condition failed.
 * @retval kStatus_SDMMC_AllSendCidFailed Send CID failed.
 * @retval kStatus_SDMMC_SetRelativeAddressFailed Set relative address failed.
 * @retval kStatus_SDMMC_SendCsdFailed Send CSD failed.
 * @retval kStatus_SDMMC_CardNotSupport Card not support.
 * @retval kStatus_SDMMC_SelectCardFailed Send SELECT_CARD command failed.
 * @retval kStatus_SDMMC_SendExtendedCsdFailed Send EXT_CSD failed.
 * @retval kStatus_SDMMC_SetBusWidthFailed Set bus width failed.
 * @retval kStatus_SDMMC_SwitchHighSpeedFailed Switch high speed failed.
 * @retval kStatus_SDMMC_SetCardBlockSizeFailed Set card block size failed.
 * @retval kStatus_Success Operate successfully.
 */
status_t MMC_Init(mmc_card_t *card);

/*!
 * @brief Deinitializes the card and host.
 *
 * @param card Card descriptor.
 */
void MMC_Deinit(mmc_card_t *card);

/*!
 * @brief intialize the card.
 *
 * @param card Card descriptor.
 *
 * @retval kStatus_SDMMC_HostNotReady host is not ready.
 * @retval kStatus_SDMMC_GoIdleFailed Go idle failed.
 * @retval kStatus_SDMMC_SendOperationConditionFailed Send operation condition failed.
 * @retval kStatus_SDMMC_AllSendCidFailed Send CID failed.
 * @retval kStatus_SDMMC_SetRelativeAddressFailed Set relative address failed.
 * @retval kStatus_SDMMC_SendCsdFailed Send CSD failed.
 * @retval kStatus_SDMMC_CardNotSupport Card not support.
 * @retval kStatus_SDMMC_SelectCardFailed Send SELECT_CARD command failed.
 * @retval kStatus_SDMMC_SendExtendedCsdFailed Send EXT_CSD failed.
 * @retval kStatus_SDMMC_SetBusWidthFailed Set bus width failed.
 * @retval kStatus_SDMMC_SwitchHighSpeedFailed Switch high speed failed.
 * @retval kStatus_SDMMC_SetCardBlockSizeFailed Set card block size failed.
 * @retval kStatus_Success Operate successfully.
 */
status_t MMC_CardInit(mmc_card_t *card);

/*!
 * @brief Deinitializes the card.
 *
 * @param card Card descriptor.
 */
void MMC_CardDeinit(mmc_card_t *card);

/*!
 * @brief initialize the host.
 *
 * This function deinitializes the specific host.
 *
 * @param card Card descriptor.
 */
status_t MMC_HostInit(mmc_card_t *card);

/*!
 * @brief Deinitializes the host.
 *
 * This function deinitializes the host.
 *
 * @param card Card descriptor.
 */
void MMC_HostDeinit(mmc_card_t *card);

/*!
 * @brief reset the host.
 *
 * This function reset the specific host.
 *
 * @param host host descriptor.
 */
void MMC_HostReset(SDMMCHOST_CONFIG *host);

/*!
 * @brief power on card.
 *
 * The power on operation depend on host or the user define power on function.
 * @param base host base address.
 * @param pwr user define power control configuration
 */
void MMC_PowerOnCard(SDMMCHOST_TYPE *base, const sdmmchost_pwr_card_t *pwr);

/*!
 * @brief power off card.
 *
 * The power off operation depend on host or the user define power on function.
 * @param base host base address.
 * @param pwr user define power control configuration
 */
void MMC_PowerOffCard(SDMMCHOST_TYPE *base, const sdmmchost_pwr_card_t *pwr);

/*!
 * @brief Checks if the card is read-only.
 *
 * @param card Card descriptor.
 * @retval true Card is read only.
 * @retval false Card isn't read only.
 */
bool MMC_CheckReadOnly(mmc_card_t *card);

/*!
 * @brief Reads data blocks from the card.
 *
 * @param card Card descriptor.
 * @param buffer The buffer to save data.
 * @param startBlock The start block index.
 * @param blockCount The number of blocks to read.
 * @retval kStatus_InvalidArgument Invalid argument.
 * @retval kStatus_SDMMC_CardNotSupport Card not support.
 * @retval kStatus_SDMMC_SetBlockCountFailed Set block count failed.
 * @retval kStatus_SDMMC_TransferFailed Transfer failed.
 * @retval kStatus_SDMMC_StopTransmissionFailed Stop transmission failed.
 * @retval kStatus_Success Operate successfully.
 */
status_t MMC_ReadBlocks(mmc_card_t *card, uint8_t *buffer, uint32_t startBlock, uint32_t blockCount);

/*!
 * @brief Writes data blocks to the card.
 *
 * @param card Card descriptor.
 * @param buffer The buffer to save data blocks.
 * @param startBlock Start block number to write.
 * @param blockCount Block count.
 * @retval kStatus_InvalidArgument Invalid argument.
 * @retval kStatus_SDMMC_NotSupportYet Not support now.
 * @retval kStatus_SDMMC_SetBlockCountFailed Set block count failed.
 * @retval kStatus_SDMMC_WaitWriteCompleteFailed Send status failed.
 * @retval kStatus_SDMMC_TransferFailed Transfer failed.
 * @retval kStatus_SDMMC_StopTransmissionFailed Stop transmission failed.
 * @retval kStatus_Success Operate successfully.
 */
status_t MMC_WriteBlocks(mmc_card_t *card, const uint8_t *buffer, uint32_t startBlock, uint32_t blockCount);

/*!
 * @brief Erases groups of the card.
 *
 * Erase group is the smallest erase unit in MMC card. The erase range is [startGroup, endGroup].
 *
 * @param  card Card descriptor.
 * @param  startGroup Start group number.
 * @param  endGroup End group number.
 * @retval kStatus_InvalidArgument Invalid argument.
 * @retval kStatus_SDMMC_WaitWriteCompleteFailed Send status failed.
 * @retval kStatus_SDMMC_TransferFailed Transfer failed.
 * @retval kStatus_Success Operate successfully.
 */
status_t MMC_EraseGroups(mmc_card_t *card, uint32_t startGroup, uint32_t endGroup);

/*!
 * @brief Selects the partition to access.
 *
 * @param card Card descriptor.
 * @param partitionNumber The partition number.
 * @retval kStatus_SDMMC_ConfigureExtendedCsdFailed Configure EXT_CSD failed.
 * @retval kStatus_Success Operate successfully.
 */
status_t MMC_SelectPartition(mmc_card_t *card, mmc_access_partition_t partitionNumber);

/*!
 * @brief Configures the boot activity of the card.
 *
 * @param card Card descriptor.
 * @param config Boot configuration structure.
 * @retval kStatus_SDMMC_NotSupportYet Not support now.
 * @retval kStatus_SDMMC_ConfigureExtendedCsdFailed Configure EXT_CSD failed.
 * @retval kStatus_SDMMC_ConfigureBootFailed Configure boot failed.
 * @retval kStatus_Success Operate successfully.
 */
status_t MMC_SetBootConfig(mmc_card_t *card, const mmc_boot_config_t *config);

/*!
 * @brief MMC card start boot.
 *
 * @param card Card descriptor.
 * @param mmcConfig mmc Boot configuration structure.
 * @param buffer address to recieve data.
 * @param hostConfig host boot configurations.
 * @retval kStatus_Fail fail.
 * @retval kStatus_SDMMC_TransferFailed transfer fail.
 * @retval kStatus_SDMMC_GoIdleFailed reset card fail.
 * @retval kStatus_Success Operate successfully.
 */
status_t MMC_StartBoot(mmc_card_t *card,
                       const mmc_boot_config_t *mmcConfig,
                       uint8_t *buffer,
                       SDMMCHOST_BOOT_CONFIG *hostConfig);

/*!
 * @brief MMC card set boot configuration write protect.
 *
 * @param card Card descriptor.
 * @param wp write protect value.
 */
status_t MMC_SetBootConfigWP(mmc_card_t *card, uint8_t wp);

/*!
 * @brief MMC card continous read boot data.
 *
 * @param card Card descriptor.
 * @param buffer buffer address.
 * @param hostConfig host boot configurations.
 */
status_t MMC_ReadBootData(mmc_card_t *card, uint8_t *buffer, SDMMCHOST_BOOT_CONFIG *hostConfig);

/*!
 * @brief MMC card stop boot mode.
 *
 * @param card Card descriptor.
 * @param bootMode boot mode.
 */
status_t MMC_StopBoot(mmc_card_t *card, uint32_t bootMode);

/*!
 * @brief MMC card set boot partition write protect.
 *
 * @param card Card descriptor.
 * @param bootPartitionWP boot partition write protect value.
 */
status_t MMC_SetBootPartitionWP(mmc_card_t *card, mmc_boot_partition_wp_t bootPartitionWP);

/* @} */
#if defined(__cplusplus)
}
#endif
/*! @} */
#endif /* _FSL_MMC_H_*/